Trabajos manufacturing engineer en New York, New YorkCrear alertas

We are looking for a Mechanical Engineer for our Westbury, NY facility. In this role you will be reporting to the Engineering Manager and working closely with Production, Quality Assurance, Production Planning, Document control, Change Engineering, and Purchasing. The Mechanical Engineer is responsible for handling aspects of operations engineering & equipment/process troubleshooting. This position will also lead all CAPEX projects for the materials team & provide project engineering support as needed for design, selection, and procurement of new equipment (or upgrading existing equipment). \n \n Your Responsibilities: \n \n Maintenance Support: \n\n • Developing PM plans & schedules\n, • Review and maintain asset list and ensure all equipment is in good working condition and provide recommendations for replacement and / or upgrade strategy\n, • Develop maintenance training plans (Equipment maintenance plans and personnel training)\n, • Perform failure analysis for equipment failures and facilitate root cause investigations and corrective actions\n\n \n Process Engineering Support: \n\n • Create, update, and maintain P&ID’s\n, • Analyze engineering sketches, specifications and related data and drawings to determine design factors\n, • Review and provide recommendations to modify design to correct operating deficiencies and/or reduce production issues.\n, • Ability to read and interpret engineering, electrical drawings, and control systems\n, • Create and maintain operating procedures for equipment\n\n \n Projects: \n\n • Ability to create Layout and Engineering Drawings in AutoCAD\n, • Lead and/or assist with facilities and equipment related projects\n, • Identify, select design, and provide recommendations for sourcing new equipment\n, • Examine, prepare and verify technical drawings and specifications, to ensure that installation and operations of new / existing equipment conforms to standards\n, • Prepare, communicate, and maintain schedules, reports, and documents based on sound project management principles\n\n \n Your Profile: \n\n • Bachelor’s degree in mechanical engineering or closely related field.\n, • Experience in handling CAPEX related projects of >$1M valuation.\n, • PMP certification preferred.\n, • At least 5 years of related experience, preferably in a manufacturing setting.\n, • Automation experience highly preferred.\n, • Experience in Six sigma & statistical process control strongly desired\n, • Demonstrated experience in process evaluation and improvement, troubleshooting and problem solving.\n, • Strong communication and interpersonal skills and ability to deal effectively with a variety of personnel including administration, engineering, scientific, and manufacturing staff.\n, • Understanding of industry recognized best practices for engineering processes.\n, • Ability to work in a fast-paced and rapidly changing environment and maintain a positive outlook.\n, • Proficiency in use of AutoCAD 3D is preferred (Minimum required proficiency in AutoCAD 2D)\n, • Working knowledge of various software including: MS Office, Project, Visio, and SAP.\n\n \n We offer: \n \n Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! \n \n The perks and benefits of working at Oerlikon include the following: \n \n\n • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • 100% company paid life insurance and disability insurance\n, • Employee Referral Bonus program because why not to bring your friends to work everyday!\n

Job DescriptionQuality Control Microbiology Engineer(s) I, II, III Quality Control Microbiology Engineer I The “Quality Control (QC) Microbiology Engineer I” will support two local sites serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of QC Microbiology, responsibilities of the QC Microbiology Engineer I will include but are not limited to: Microbiological Testing: • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP).REQUIREMENTS, • Associates degree in a science or relevant field required, • Training in GxP/ GDP, Safety, • Minimum 0-2 years of experience or equivalent experience., • Microbiology testing or within the biopharmaceutical industry experience preferred., • Proficient with computer software; Microsoft Office, • Strong written and oral communication skills, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels, • Must be able to work during the weekend, holidays and as required by the company, • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer II The Quality Control Microbiology Engineer II will support two local sites serving as a support role to clinical and commercial production. The QC Microbiology Engineer II will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer II will include but are not limited to: Microbiological Testing:, • Growth Promotion, • Microbial Identification, • Sterility Testing, • Gram Stain, • EndotoxinEquipment Monitoring:, • Ensure equipment is in proper working conditions, • Ensure all equipment is properly maintained/calibrated, • Shipping of test samples and equipment to contract laboratories for testing, • Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Writing/conducting investigations pertaining to microbiological testing, • Develop and train QC Microbiology Engineer I personnel on relevant business processesREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 2-4 years of experience with microbiological testing or within the biopharmaceutical industry., • Training in GxP/GDP, Safety, • Proficient with computer software such as; Microsoft Office, • MODA/LIMS, • Familiarity with ISO and EU standards, • Strong written and oral communication skills, • Technical writing skills, • Technical training ability, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility, • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must have the ability to work in a team-oriented environment and with clients, • Must be able to work during the weekend, holidays, and as required by the company, • Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator., • Duties, responsibilities, and activities may change at any time with or without notice.QC Microbiology Engineer III The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the QC Microbiology Engineer III will include but are not limited to:, • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experience, • Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities, • Supervisory Responsibility; Direct reports, • While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens., • Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels., • Must have the ability to work in a team-oriented environment and with clients., • Must be able to work during the weekend, holidays and as required by the company

Job DescriptionQuality Control Microbiology Engineer III Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Device, IT and Human Resources disciplines in New Jersey. The Quality Control Microbiology Engineer III will support two local sites. Serving as a support role to clinical and/or commercial production. The QC Microbiology Engineer III will coordinate data for batch release, participate in project/client meetings, and author/revise microbiological testing procedures. Additionally, the incumbent will perform microbiological testing including, but not limited to, growth promotion, microbial identification, sterility testing, Gram stain, and endotoxin. Under the direction of the Associate Manager of Microbiology, responsibilities of the • Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP)., • Coordinates microbiological testing data for batch release, • Participation in project/client meetings and communications, providing scientific and technical expertise, • Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols, • Review of investigations and documentation of non-confirming events and environmental excursions., • Apply expertise of compliance requirements to maintain an inspection-ready state., • Participate and act as subject matter expert during audits/inspections, • Develop and train QC Microbiology Engineer II on relevant business processes, • Processing of purchase orders for outsourced testing and lab supplies, • Coordinates work orders, • Other duties as assignedREQUIREMENTS, • BA/BS in a science or relevant field required or equivalent experience, • Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry, • Minimum required training; GxP/GDP Training, Safety Training, • Proficient with computer software such as; Microsoft Office, MODA/LIMS; Microsoft Visio (preferred); Netsuite (preferred); Maximo Asset Management System (preferred), • Proficient knowledge of ISO and EU standards, • Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review., • Strong written and oral communication skills, • Strong technical writing skills, • Technical training experienceMust be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilitiesSupervisory Responsibility; Direct reportsWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, liquid nitrogen and noise levels.Must have the ability to work in a team-oriented environment and with clients.Must be able to work during the weekend, holidays and as required by the company.Working EnvironmentWhile performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens.Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen.Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy.Must have the ability to work in a team-oriented environment and with clientsMust be able to work during the weekend, holidays and as required by the companyMust be able to handle the standard/moderate noise of the manufacturing facility Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Our client provides industrial automation, process control, and operational excellence solutions to the energy, life sciences, and pulp & paper industries. Position Summary: Our client is seeking a Validation Engineer experienced validating BMS and PLC based control systems experience in Honeywell, Siemens, Rockwell, or JCI. As a Validation Engineer, you will be responsible for the CQV efforts for BMS and Controls systems. Requirements: Experience: 2+ years of relevant experience in the pharmaceutical industry environment. Required / Qualifications: • Pharmaceutical manufacturing experience, • Experience authoring System Lifecycle documents for cGMP BMS and HVAC systems, • Experience authoring and executing BMS qualification protocols., • Excellent organizational and communication/people skills, • Self-motivated and able to work with minimum supervision, • Strong verbal and written Preferred / Qualifications: • Knowledge of Industrial Networks, VMS, VPNs, • PLC proficiency (Rockwell or Siemens), • Understanding of electrical design fundamentals and Power Distribution Systems

We are a specialized engineering company with international exposure and subject matter expertise in the design, fabrication and qualification of sterile, high purity and potent containment process equipment and plants. We are growing our company size and capabilities through recruitment of talented professionals. We offer a true creative engineering design work environment with a wide range of interesting projects in the bio-pharmaceutical, personal care and food industry. POSITION: You will be part of a cross-functional engineering team in the role of Jr. Process Engineer. You will develop and deliver conceptual, preliminary, and detailed design packages through to CQV for GMP-compliant integrated process equipment and unit operations used in the manufacturing of pharmaceutical drug substances and products. SUMMARY: Working under the guidance of a senior engineer you will be responsible for: • Design Basis Development, • Process Alternatives Evaluations, • User Requirement Specifications (URS), • Process Flow Diagrams (PFDs), • Process Piping and Instrumentation Diagrams (P&IDs), • Process Integration of Unit Operations, • Equipment Plot Plans and Layout Drawings, • Equipment Sizing and Specification, • Commissioning & Qualification Protocol Development and Execution SKILLS: • Strong interpersonal skills and the ability to work in a team environment., • Ability to manage and coordinate cross-functional project teams., • Ability to prioritize multiple tasks., • Self-directed, resourceful, and able to work independently with minimal oversight., • Excellent written and verbal communication skills., • Ability to work effectively in a fast-paced multi-tasking environment. EDUCATION: Bachelor’s degree in engineering LOCATION: The primary work location will be in our New Jersey site. However, a significant aspect of the role will involve intermittent international travel, including extended periods spent at equipment vendors for Factory Acceptance Tests (FATs) and at the client's site for Commissioning, Qualification, and Validation (CQV) activities. **APPLICATION INSTRUCTIONS: Please attach a single merged PDF and include both your resume and your unofficial transcript.

Key Areas of Responsibilities: • Work concurrently with cross functional departments to develop manufacturing processes that are robust, error-proofed, and efficient to perform., • Conduct time studies to aid in tracking product labor cost, line balancing, and productivity., • Lead pre-production build activity and oversees the design transition into full production., • Continually assess cost reduction opportunities with design, process, or material changes., • Facilitates the design and fabrication of basic tooling and fixtures to aid in manufacturing., • Provide manufacturing engineering feedback during product design reviews., • Create clear and concise work instructions, test instructions, detailed reports, and other documentation as required., • Assist in training Production Associates when requested., • Support Manufacturing Operations and help ensure daily production targets and metrics are met., • Assist in troubleshooting electro-mechanical system failures and help perform root cause analyses and corrective action., • Initiate Engineering Change Requests (ECR's) and Engineering Change Notices (ECN's)., • Work with the Design and Manufacturing Operations groups on resolving supplier quality issues., • Support the development of a safe, ergonomic, and environmentally sound workplace., • Work with customers and sales team to define requirements and scope of new products and translate them into working engineering specifications., • Able to lead small teams in problem solving sessions or lean kaizens. Skills and Experience: • Skilled practitioner of Lean Manufacturing and use of Six Sigma tools and methodologies., • Experience providing R&D groups improvement ideas and opportunities during the product development phase., • Hand-on experience developing box-build type Production lines., • Demonstrated flexibility, self-direction, and self-discipline in planning and accomplishing objectives and in meeting deadlines with limited supervision., • Experience writing clear and concise work Instructions for the Production personnel to use to properly build products., • Must possess a continuous-improvement mindset with a "Can-Do" attitude and actively seek solutions to problems, good team player with a pleasant personality., • Proficient in Microsoft Office, Visio, AutoCAD, or Solidworks experience is a plus., • Must have excellent problem-solving skills and possess good analytical, verbal, and written communication skills., • Familiarity with ESD prevention, IPC-A-610/J-STD workmanship standards, and Quality Management System Standards; ISO 9001 and 13485, and FDA standards knowledge and experience are desirable, • Proficiency using basic electronic test and measurement equipment including Calipers, Multimeters, Power Supplies, etc., • Ability to read and interpret mechanical drawings and electrical schematics., • Travel and working extended workdays as required to support Manufacturing Operations, • Must be able to lift up to 30 lbs. unassisted; must be able to sit and/or stand up to 8 hours per day uninterrupted. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description The Opportunity We’re expanding and as our business grows and our product range broadens, we’ve found it necessary to make significant investments in our organization. Similarly, we’re investing in our people and are looking for someone who’s personally supportive of our customers and equally driven to deliver exceptional products for our market. We're looking for an experienced, detail oriented, individual who's ready to take on challenges head first. The maintenance and improvement of our over 150,000 sqft of state-of-the-art design and manufacturing facility is central to our ability to create, produce and deliver at the level required by our customers. We need team members who thrive on seeing every part of the operation perform at its peak. Job Responsibilities -Conducting repairs and implementing improvements around the facility from the installation of new machinery to repairs to the building itself. -Performing quality checks and basic routine maintenance on HVAC, plumbing and electrical systems throughout facility. -Checking into security concerns and mitigating potential safety hazards. -General duties such as cleaning, painting, loading and unloading trucks, minor carpentry, electrical and plumbing work, moving heavy equipment, etc. -General outdoor duties such as sweeping, cleaning, snow removal, waste collection, etc. -Participation in major facility improvement efforts. Required Experience & Qualifications -3 years experience in a maintenance or general fabrication role -Basic skills in carpentry, plumbing, electrical -Ability to lift 100 lbs safely and repeatedly -Demonstrated ability to work safely and independently in an industrial environment -Solid computer skills with proficiency in MS Office suite -Good ability to communicate and collaborate with internal team members and external resources Should have: -Ability to operate forklift, pallet jack, and other material handling equipment -Advanced carpentry, machining, welding, plumbing, electrical, or fabrication skills Company DescriptionThe Company Crye Precision has been designing and manufacturing apparel and equipment for America's fighting forces as well as domestic and international law enforcement groups for over 20 years. We work hard to provide smart, high-performance, long-wearing gear for people who demand the best. We design, engineer, and manufacture all of our products here in the USA and have assembled a great team of over 200 dedicated individuals at our headquarters in the historic Brooklyn Navy Yard to fulfill that mission.The Company\r\nCrye Precision has been designing and manufacturing apparel and equipment for America's fighting forces as well as domestic and international law enforcement groups for over 20 years. We work hard to provide smart, high-performance, long-wearing gear for people who demand the best. We design, engineer, and manufacture all of our products here in the USA and have assembled a great team of over 200 dedicated individuals at our headquarters in the historic Brooklyn Navy Yard to fulfill that mission.

Job Description Job Summary: The Engineer at Hyatt Place is responsible for maintaining the property’s overall functionality, including the building, equipment, and grounds. This role ensures that all hotel facilities and services operate smoothly and efficiently, providing guests with a safe and comfortable experience. Key Responsibilities: • Preventive Maintenance: Perform routine maintenance tasks on all mechanical equipment, HVAC systems, plumbing, electrical systems, and other hotel assets. Ensure the upkeep of guest rooms, public spaces, and back-of-house areas., • Repair Work: Respond promptly to guest or management requests for repair services. Troubleshoot and repair issues related to plumbing, electrical, HVAC, and other mechanical systems., • Safety and Compliance: Maintain the hotel's safety standards by conducting regular inspections and tests, ensuring that all equipment is in compliance with local, state, and federal regulations. Participate in fire drills and safety programs., • Energy Management: Monitor and control energy usage throughout the hotel, looking for ways to improve efficiency and reduce costs., • Documentation: Keep accurate records of maintenance work, inspections, and repairs. Report any unsafe conditions or equipment that requires replacement., • Vendor Coordination: Work with outside contractors and vendors for specialized repairs or maintenance tasks. Oversee their work to ensure it meets the hotel’s standards., • Team Collaboration: Work closely with the housekeeping and front desk teams to address guest concerns and maintain the overall appearance and functionality of the hotel., • Emergency Response: Be available to respond to emergencies, such as power outages, plumbing issues, or fire alarms. Act swiftly to mitigate any issues., • Education: High school diploma or equivalent required; technical or vocational training preferred., • Experience: Previous experience in hotel maintenance or engineering preferred. Experience with HVAC, plumbing, electrical, and mechanical systems is highly valued., • Skills: Strong problem-solving skills, attention to detail, and ability to work independently. Good communication skills and the ability to interact positively with guests and team members., • Certifications: Relevant certifications (e.g., HVAC, EPA) are preferred. The role may require working varied shifts, including nights, weekends, and holidays, depending on the hotel's needs. Requirements • A degree in a relevant field such as mechanical, electrical, or industrial engineering., • Proven experience in a manufacturing facility as a maintenance engineer or in a similar role., • Strong analytical and problem-solving skills., • Knowledge of electrical systems and the ability to use a multimeter, including high and low voltage systems., • Basic welding skills., • Excellent communication and customer service skills., • Ability to work independently and as part of a team., • Physical stamina to perform tasks in a fast-paced environment. Benefits: • Competitive salary, • Health and dental insurance, • Paid time off, • Employee discounts at Hyatt properties, • Opportunities for career advancementCompany DescriptionWe are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.We are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.

About Kerry Kerry is the world's leading taste and nutrition company for the food, beverage and pharmaceutical industries. Every day we partner with customers to create healthier, tastier and more sustainable products that are consumed by billions of people across the world. Our vision is to be our customers' most valued partner, creating a world of sustainable nutrition. A career with Kerry offers you an opportunity to shape the future of food while providing you opportunities to explore and grow in a truly global environment. About the role The RDA Process Principal Scientist performs research and development work with a commercial focus in Beloit which bridges the gap between RD&A Taste Innovation and KERRY’s commercialization process. He/she focus on process optimizations, scale-ups, regulatory hurdles and troubleshoots to new products and technologies. He/she collaborates with other scientists (especially Taste Innovation team), engineer, maintenance, QC, sanitation, etc. Key responsibilities • Work closely with Taste Innovation team to develop taste modulation product to scale up, • Focus on to solve the regulatory hurdles and troubleshoots, • Liaising with engineering, research, technical, QC, sanitation, maintenance, and/or production staff, • Planning, organizing, and overseeing process or production trials, • Making improvements or modifications to current processes, • Using design models to develop manufacturing processes, • Generating ideas for new products and researching feasibility in terms of profitability, resource availability and compliance with regulations., • Adhere to Standard Operating Procedures (SOPs) and Cleaning In Place (CIP), • Keep recording data log (flow rate, pressure, temperature, etc) and analyzing data, • Track and surveillance of stock materials, • Writing and reading technical papers, reports, reviews, and specifications. Qualifications and skills • Bachelor’s or Master’s in food process science, food engineering, agricultural science, engineering, material science or related science., • Experience in a food production environment or industrial laboratory, • Knowledge of good manufacturing practice, • Problem-solving skills, analytical skills, and attention to detail, • Strong communication and interpersonal skills, able to work effectively as part of a team., • Excellent analytical, organizational, and multi-tasking skills. The typical hiring range for this role is $107,757 to $181,563 annually and is based on several factors including but not limited to education, work experience, certifications, location, etc. In addition to your pay, Kerry offers benefits such as a comprehensive benefits package, incentive and recognition programs, equity stock purchase and retirement contribution (all benefits and incentives are subject to eligibility requirements). Kerry is an equal opportunity employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age disability, protected veteran status or other characteristics protected by law. Kerry will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditional upon the successful completion of a background investigation and drug screen. Additional information can be found at: Know Your Rights: Workplace Discrimination is Illegal (dol.gov). Beware of scams online or from individuals claiming to represent us. A Kerry employee will not solicit candidates through a non-Kerry email address or phone number. In addition, Kerry does not currently utilise video chat rooms (e.g., Google Hangouts) to conduct interviews. Refuse any request that asks you to provide payment to participate in the hiring process (e.g., purchasing a “starter kit,” investing in training, or something similar). Kerry will not ask you to pay any money at any point in the hiring process with the exception of reimbursable travel expenses. In addition, any payments made by Kerry will be from official firm accounts bearing the Kerry name.

Akkodis is seeking a Contract-to-Hire Manufacturing Process Engineer for a Contract-to-Direct Hire position in Garden City, NY. This position is Direct Hire and fully onsite, offering growth and a generous benefit package. • Hourly Rate: $55.00 - $60/hour The rate may be negotiable based on experience, education, geographic location, and other factors., • Type: Contract-to-HIre, • Location: Garden City, NY, • Duration: 6 months to Direct Hire Job Specific Duties: • Initial management of efforts to transfer Tooling, Parts and Products to new facility., • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Requirements/Qualifications: • Bachelors degree in Industrial Engineering, Manufacturing Engineering or other relevant degree., • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card., • 3 or more years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills, • Due to ITAR Restrictions, an export license may be required. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at . We are open to working with professionals who are authorized to work in the US without sponsorship. No C2C Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit . The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Job Description The Opportunity We’re expanding and as our business grows and our product range broadens, we’ve found it necessary to make significant investments in our organization. Similarly, we’re investing in our people and are looking for someone who’s personally supportive of our customers and equally driven to deliver exceptional products for our market. We are seeking individuals to join our shipping department to fulfill orders and maintain inventory. Successful candidates have strong attention to detail. Job Responsibilities Pick and pack small parcel and freight shipments. Process UPS and USPS shipping labels. Assist packing freight shipments and operating strapping and wrapping machines. Loading of small-package and freight shipments on carrier truck. Stock and organize finished goods inventory. Process customer returns. Other related tasks as assigned. Required Experience & Qualifications 2+ years of warehouse experience. Picking and Packing experience desired. Basic knowledge of warehouse safety guidelines. Ability to regularly lift up to 50 pounds. Ability to work well within a team. Company DescriptionThe Company Crye Precision has been designing and manufacturing apparel and equipment for America's fighting forces as well as domestic and international law enforcement groups for over 20 years. We work hard to provide smart, high-performance, long-wearing gear for people who demand the best. We design, engineer, and manufacture all of our products here in the USA and have assembled a great team of over 200 dedicated individuals at our headquarters in the historic Brooklyn Navy Yard to fulfill that mission.The Company\r\nCrye Precision has been designing and manufacturing apparel and equipment for America's fighting forces as well as domestic and international law enforcement groups for over 20 years. We work hard to provide smart, high-performance, long-wearing gear for people who demand the best. We design, engineer, and manufacture all of our products here in the USA and have assembled a great team of over 200 dedicated individuals at our headquarters in the historic Brooklyn Navy Yard to fulfill that mission.

Company Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: \n • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending.\n, • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities.\n, • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts.\n, • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage.\n, • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc.\n, • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals.\n, • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses.\n, • Manage operator qualifications to ensure production staff is qualified to perform given tasks\n, • Ability to work in a fast-paced, deadline-oriented team environment\n, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance\n, • Excellent team player with a great attitude. Accountabilities\n\n • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes.\n, • Performance Measurement & Performance Evaluation.\n, • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them\n, • First pass yield\n, • Process compliance (welding, bending, brazing, chemical)\n, • Project completion/execution\n, • Aging (units over lead-time)\n\n Qualifications \n • Proven working experience as a manufacturing engineer or in a related field.\n, • Experience in blueprint reading and spec interpretation.\n, • Must be comfortable in a manufacturing environment often fast-paced and loud.\n, • Must be able to stand, lift, walk, bend, and reach during their shift.\n, • Must be comfortable wearing safety glasses.\n, • Work well within a team.\n, • Creative and innovative thinking skills.\n, • Problem-solving skills.\n\n Additional Information Benefits: \n • 401(k)\n, • 401(k) matching\n, • Dental insurance\n, • Employee assistance program\n, • Health insurance\n, • Life insurance\n, • Paid time off\n, • Vision insurance\n\n We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

About Weber Knapp Company has designed, developed, and manufactured mechanical hardware and kinematic motion control devices for over 100 years.Our team of design engineers has over 85 years of combined experience working for Weber Knapp Company.We have custom engineered and manufactured products fo

Job Description Providing Engineering and Manufacturing solutions since 1955, Triangle specializes in the precision engineering and manufacturing of highly complex, tight-tolerance machined parts and assemblies. Triangle continues to thrive in more than 107,000 square feet over four state-of-the-art facilities at our Upper Saddle River, NJ campus. As a family-owned company, we foster a workplace that supports customer-driven, growth-oriented values and has a passion for surpassing expectations. We invest in our associates and create a supportive, team-based environment for learning, innovation, and advancement. Triangle is not only a family-run business; it's also a place where our associates feel like family. We believe in the same values and bring the same passion to our work each day to make a difference in people's lives. SUMMARY Responsible for the successful outcome of the development and implementation of the complete part-specific process by effectively translating the customer’s requirements to the company and suppliers, and adhering to the Quality Management System, all applicable regulations, and Lean Manufacturing principles. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Manages all aspects of the part-specific process, including resource planning, project timelines, and establishing priorities to ensure customer requirements and quoted standards are met., • Evaluates and improves process documentation protocols for engineering and manufacturing, as well as creates, updates, and maintains the item masters, bills of material, and routers, etc., • Reviews requests for quotes (RFQs) and helps determine the feasibility of projects, estimates labor and related costs, and prepares formal quotes for submission to customers., • Teams with customers to review designs for manufacturability and to understand the functionality of the part and its features, adds specifications as needed, and verifies GD&T was properly applied., • Clarifies, confirms, and correlates acceptance criteria with customers, company, and suppliers., • Develops manufacturing methods for new and existing projects by reviewing customer specifications and quality agreements, adhering to all applicable requirements, and effectively translating them into instructions., • Performs initial sourcing and qualifies suppliers from a technical perspective, as well as effectively communicates the customer requirements through training and auditing of the supplier’s performance on a regular basis., • Ensures product quality through the development and implementation of complete quality plans including CMM programming, gage design and procurement, and inspection plans., • Coordinates and/or performs validation activities (IQ, OQ, PQ) designed to qualify the equipment and the process as required., • Teams with the CNC Engineer to design work-holding devices and tooling as needed to ensure the desired outcome., • Investigates root cause of customer and/or supplier rejections and internal quality failures, dispositions non-conforming parts, recommends and implements effective corrective action as required, and provides accurate and timely responses to customers., • Determines the impact of ECNs on bills of material, routing, and spares, and coordinates any change., • Leads the post-production review and evaluation of the part-specific process, including equipment performance and product quality, recommends improvements, and coordinates their implementation., • Provides direction and on-the-job training to engineering and production associates regarding manufacturing methods and practices, as well as recommends, develops, and implements complete training programs, including materials and assessments., • Champions lean manufacturing principles by encouraging lean thinking in all aspects of development and production, as well as conducting and/or coordinating training and implementation with managers and associates., • Understands and complies with company policies, safety guidelines, quality system procedures, and housekeeping standards.Additional Duties and Responsibilities:, • Program, troubleshoot, and manage the Universal Robots arms., • Oversee the fixture designs, programs, prove outs, operation, and maintenance of the automated blasters., • Identify opportunities for automation within the organization and develop solutions to enhance productivity., • Collaborate with various departments to implement automation projects., • Ensure all automated systems comply with safety and quality standards., • Provide training and support to staff on the use of automated equipment. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience Bachelor’s degree from a four-year college or Manufacturing Engineer Certification and 8-10 years related experience and/or training; or equivalent combination of education and experience. Required Skills, Knowledge, and Abilities: • Ability to read, write, and speak English. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or government regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers, and the general public., • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Experience with computer applications, including word-processing, spreadsheets, graphs, databases, CAD, and presentations., • Experience with process capability, Gage R&R, and statistical techniques., • Experience in using basic and advanced measuring tools and equipment., • Applied knowledge of Geometric Dimensioning & Tolerancing (GD&T)., • Capable of working independently as well as collaborating and coordinating efforts with colleagues., • Ability to establish priorities and manage multiple activities and requirements in a changing, fast-paced environment., • Experience with manufacturing materials, manufacturing processes, and secondary processes., • Project management skills.Desired Skills, Knowledge, and Abilities:, • Advanced metrology (CMM programming, vision system, etc.)., • Lean/Six Sigma. Triangle is proud to be an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. Powered by JazzHR gdadFPpwmr

Job Description Our client, a global Japanese trading company is looking for a Network Engineer in the Houston TX or New York NY area to join their team Title: Network Engineer Industry: Renewables Trading Type: Full Time Direct Hire Exempt Location: Houston TX or New York NY Salary: 100-110K (TX), 120-130K (NY) QUALIFICATIONS: • 4-7 years of System/Network Engineering Experience, • 2-4 years of Project Management Experience, • Bachelor’s degree is preferred, • Technical knowledge, analytical, design and planning skills, • Develop and lead IT infrastructure related technological projects for clients, • Arrange and implement network, security, and some other IT infrastructure related project, • Design, implement, and refine product development, • Data Center management such as colocation service management and maintenance, • Designing, implementation and operation experience in Router, Switch, MPLS, SASE, SD-WAN / SD-LAN and VPN Company DescriptionWe are a Talent Acquisition/People Operation (HR) group that connects people to careers and professional growth. Would you like to look for a new job opening to expand your career path or a new applicant for your opening position? Then you are in the right place to start! TOP Group has grown from a single office in New York in 1992, to one of the global leaders in Japanese-related talent solutions today. As one of the first Japanese staffing agencies in the U.S., we started our focus in Finance but quickly expanded to other industries such as Technology, Freight Forwarding, Trading, and Manufacturing. We have offices in New York - Head Quarters, San Francisco, Los Angeles, and Houston. We have been expanding to Mexico to assist the Japanese corporations and become the #1 Japanese Recruiting Agency in Central America. Our Industries include: ●\tIT/Innovation ●\tManufacturing ●\tTrading ●\tLogistics ●\tEngineering ●\tOil & Gas ●\tCPA/Accounting ●\tFinance/Bank ●\tEntertainment If you are open to new job opportunities or interested in developing your career path, please follow our page, and let’s connect! You are more than welcome to InMail recruiters below. Unsure of which office to connect to? No worries! We will direct you to the nearest office for your desired location. For more information, please visit our website. are a Talent Acquisition/People Operation (HR) group that connects people to careers and professional growth. Would you like to look for a new job opening to expand your career path or a new applicant for your opening position? Then you are in the right place to start!\r\n\r\nTOP Group has grown from a single office in New York in 1992, to one of the global leaders in Japanese-related talent solutions today. \r\n\r\nAs one of the first Japanese staffing agencies in the U.S., we started our focus in Finance but quickly expanded to other industries such as Technology, Freight Forwarding, Trading, and Manufacturing. \r\n\r\nWe have offices in New York - Head Quarters, San Francisco, Los Angeles, and Houston. \r\n\r\nWe have been expanding to Mexico to assist the Japanese corporations and become the #1 Japanese Recruiting Agency in Central America.\r\n\r\nOur Industries include:\r\n●\tIT/Innovation\r\n●\tManufacturing\r\n●\tTrading \r\n●\tLogistics\r\n●\tEngineering \r\n●\tOil & Gas\r\n●\tCPA/Accounting \r\n●\tFinance/Bank\r\n●\tEntertainment\r\n\r\nIf you are open to new job opportunities or interested in developing your career path, please follow our page, and let’s connect! You are more than welcome to InMail recruiters below. Unsure of which office to connect to? No worries! We will direct you to the nearest office for your desired location.\r\n\r\nFor more information, please visit our website.

Job DescriptionSenior Mold Designer & Toolmaker Location: Westchester County NYEmployment Type: Full-Time Position OverviewWe are seeking an experienced Senior Mold Designer & Toolmaker to join our aerospace and defense electronics manufacturing team. This critical role supports the production of ultra-miniature transformers, inductors, power supplies, and magnetic components for military, aerospace, and mission-critical applications. The successful candidate will design and fabricate precision tooling for components that operate in extreme environments, from Mars rovers to submarine systems, requiring exceptional reliability and miniaturization expertise. Key ResponsibilitiesDesign & Engineering • Design and develop ultra-precision injection molds and tooling for miniature magnetic components, • Create tooling for transformer housings, inductor enclosures, and power supply modules with dimensions as small as 0.31" x 0.31" x 0.34", • Develop micro-molding solutions for components operating from -55°ree;C to +130°ree;C temperature ranges, • Design tooling for hermetic sealing applications requiring 100% vacuum impregnation processes, • Engineer solutions for molding around delicate magnetic cores, windings, and electronic assemblies, • Create precision tooling for surface mount and through-hole magnetic component packaging, • Design automated potting and encapsulation systems for extreme environment protectionUltra-Miniature Component Manufacturing, • Fabricate tooling for components with wire gauges as fine as 52 AWG (less than 0.001" diameter), • Develop solutions for molding magnetic shields and EMI suppression components, • Create precision fixtures for high-voltage applications up to 10,000V ratings, • Design tooling for power components ranging from 0.75W to 300W in ultra-compact packages, • Engineer solutions for military-grade reliability requirements (MIL-PRF-27, MIL-STD-202), • Support manufacturing of components for QPL (Qualified Products List) certificationAdvanced Precision Manufacturing, • Execute micro-machining operations for ultra-miniature component tooling with tolerances to ±0.0001", • Operate CNC machining centers for precision cavity work in transformer and inductor molds, • Manage wire EDM processes for intricate details in magnetic component housing tools, • Implement specialized surface finishing for optimal magnetic field performance, • Maintain dimensional accuracy for components requiring 300+ thermal cycle reliability, • Execute precision assembly and testing of complex multi-cavity tooling systemsMilitary & Aerospace Quality Standards, • Ensure all tooling meets stringent military and aerospace manufacturing standards, • Implement quality control processes for components destined for fighter aircraft, spacecraft, and submarine systems, • Support manufacturing processes for components used in guidance systems and space applications, • Maintain traceability and documentation requirements for defense contractor specifications, • Coordinate with quality assurance for first article inspection and ongoing production validation, • Support customer audits and certification processes for aerospace and defense applicationsSpecialized Manufacturing Processes, • Design tooling for vacuum impregnation and potting processes unique to magnetic components, • Develop solutions for handling and molding magnetic materials and ferrite cores, • Create automated systems for precise winding insertion and core placement, • Engineer tooling for specialized lead configurations (gull wing, J-lead, surface mount), • Support manufacturing of components for harsh environments including space, underwater, and high-vibration applicationsQualifications:Technical Skills, • CAD/CAM Systems: Advanced proficiency in SolidWorks, MasterCam, and precision design software, • Micro-Machining: Expert-level skills in ultra-precision CNC programming and operation, • EDM Operations: Extensive experience with wire EDM for micro-scale component features, • Materials Science: Understanding of magnetic materials, ferrites, potting compounds, and high-temperature plastics, • Quality Systems: Knowledge of MIL-STD standards, QPL requirements, and aerospace quality protocols, • Measurement Systems: Proficiency with CMM, optical measurement, and micro-dimensional inspectionEducation, Training & Qualifications, • Required: Technical diploma/certificate, completed apprenticeship, or equivalent hands-on training, • Preferred: Technical degree in Mechanical Engineering, Manufacturing Engineering, or Materials Science, • Minimum 10+ years of progressive experience in precision mold design and toolmaking, • Specialized training in magnetic component manufacturing or aerospace electronics preferred, • Familiarity with defense contractor requirements and security protocols preferred, • Experience with magnetic component design and electromagnetic field considerations, • Competitive salary commensurate with experience ($90,000 - $100,000+ depending on qualifications and clearance level), • Comprehensive health, dental, and vision insurance with premium coverage, • 401(k) retirement plan with generous company matching, • Performance-based bonuses tied to mission-critical program success

Job DescriptionDescription: Company Overview Founded in 1994, Consulting Engineering Services (CES) is a mechanical, electrical, plumbing, fire protection engineering and commissioning firm with 180 employees in eight national offices. CES specializes in the design of custom building systems for projects across the United States. We are a dedicated team of knowledgeable professionals focused on listening attentively and investigating thoroughly to identify unique solutions. We are passionate about providing sustainable and efficient design across all sectors of our portfolio, ranging from high-end residential estates, K12 learning environments, public safety facilities, commercial workspaces, hospitals, libraries and many more. At CES, relationships matter – inside and out. Client advocacy is ingrained in our culture because we recognize that how we are with each other truly matters. As our office continues to grow, we still maintain a familial atmosphere founded on respect and support for one another. Visit us at: Consulting Engineering Services CO, CT, MA, NH, NYC, FL, TX, MT (ceseng.com) We currently have an opening in our NYC Downtown office for a Senior Electrical Engineer. Responsible for major electrical design determinations under the direction of the Project Manager. Support organization’s mission and vision to meet company’s objectives by providing exceptional client service. Essential Functions · Responsible for overall electrical technical content of a project using engineering formulas and skills for ensuring safety and technical accuracy. · Review design project for code compliance and perform code research as required to comply with applicable State, Local and Federal codes. Apply in depth knowledge of codes, including NEC, NFPA 72 and 101. · Monitor construction progress and C.A. correspondence to ensure accurate and timely responses to R.F.I.’s and related issues. · Review other teams design projects. · Participate in standards meetings within the electrical engineering discipline. · Identify and select equipment from appropriate manufacturing catalogs/websites for specific applications. · Collaborate with clients and clients’ PMs to meet their objectives. · Perform on-site investigations and surveys prior to design. · Write electrical specifications thru completion. · Coordinate the contract documents between engineering disciplines and architectural details; participate in coordination meetings with owner/architect. · Provide technical support to contractors throughout construction. · Prepare reports, opinions, and recommendations for the approval of the Project Manager concerning the direction of the project. · Ensure timely delivery of all completed projects; meet project schedules set by the Project Manager. · Plan time of self and other electrical engineers/designers to ensure project is completed on time, on budget and is technically correct. · Act as technical advisor to junior staff regarding project assignments. · Perform design work using AutoCAD and Revit. · Present electrical design to owner/architect when required. · Serve as a field engineer during construction phase of a project. Requirements: Requirements · Electrical Engineer with a minimum of 5 years of experience working with electrical systems. · BSEE or equivalent degree or an equivalent combination of education and experience. · Proven design experience in the areas of building operation, energy use, and building electrical systems. · Must be able to use AutoCAD and Revit, for drafting and design to complete a project. · In depth knowledge of Electrical Engineering codes, including NEC, NFPA 72 and 101. · Must be able to travel and visit work sites as necessary to the job at the time convenient for the clients, contractors and building managers. · Maintain knowledge and skills in the particular area of expertise by attending conferences, reviewing scientific journals and participating in specific industry standards organizations such as NFPA, IES, etc. · PE license strongly preferred. Qualifications · Demonstrated ability to build and foster client relations. · Critical thinking and mechanical aptitude, with proactive thinking processes. · Strong multi-tasking skills are essential. Strong written and verbal communication skills. · Ability to manage a team of engineers and support staff engaged in the design and production of accurate construction documents. Ability to effectively coach, train, mentor and motivate staff. · Must possess a clear appreciation for deadlines; excellent time management skills are necessary. · Must be able to be fully confidential. CES provides a robust and comprehensive benefits package to its employees. Some of these benefits include: · 401k Plan with employer match · Paid holidays/vacation/sick/personal time · Medical/HSA/Dental/Vision · Short- and Long-Term Disability insurance · Life Insurance · Flextime · Half day Friday hours Pay: Based on experience and location We are an Equal Opportunity Employer

Job DescriptionAbout Voyant: Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. With Voyant, the next generation of machines can see, understand, and navigate the world like never before. Discover how we’re redefining what’s possible by making real products out of cutting-edge research in silicon photonics. Position Overview: We are seeking a highly motivated and self-driven Photonics Test Engineer to take ownership of test development and operations for our cutting-edge silicon photonics FMCW LiDAR technology. This is a hands-on role where you will develop and execute advanced test methodologies, ensure rigorous validation of our photonics devices, and work closely with a multidisciplinary engineering team. You will set a high standard for test execution, troubleshooting, and process improvements, leading by example through direct contributions and technical expertise. Key Responsibilities: * Develop and execute design verification tests, analyze results, and provide feedback to improve device performance. * Define and implement both die-level and wafer-level test solutions in collaboration with design, product, and packaging teams. * Develop production test solutions for silicon photonics components to ensure manufacturability and scalability. * Optimize and standardize test and analysis methodologies to improve repeatability and accuracy. * Bring up, manage, and operate automated wafer-level test (WLT) probers for silicon photonics devices. * Perform routine setup calibrations and ensure quality control in test processes. * Identify and mitigate test challenges, ensuring the execution of large-scale technical projects in a timely and efficient manner. Qualifications: * Education: Bachelor's, Master’s, or PhD in Electrical Engineering, Photonics, Optics, Physics, or a related field. * Experience: Minimum 2 years of hands-on lab experience testing silicon photonics devices or related photonics/optics components. * Technical Expertise: * Strong understanding of optical integrated circuit (PIC) design, testing, and its impact on product yield and performance. * Hands-on experience with optical test and measurement equipment (e.g., optical spectrum analyzers, power meters, interferometers, high-speed photodetectors) and optomechanical alignment tools. * Proficiency in Python for test automation, data analysis, and instrument control. * Knowledge of automated wafer-level testing (WLT) and test methodologies for silicon photonics. Practical experience in WLT is highly preferred. * Experience with fiber alignment automation or active alignment techniques. * Problem-Solving: Strong analytical and troubleshooting skills, with the ability to resolve complex system issues and propose corrective actions. * Communication & Collaboration: * Strong verbal and written communication skills to effectively convey complex test results, analysis, and technical insights. * Ability to work cross-functionally with design, manufacturing, and packaging teams. * Work Ethic & Adaptability: * Highly self-motivated and capable of managing multiple tasks with attention to detail. * Comfortable working in a fast-paced environment with evolving technical challenges. Benefits Package: * Competitive base salary and meaningful equity package. * Comprehensive health benefits (Medical, Dental, Vision). * Unlimited PTO and paid company holidays. * Team events and company meetups. * Complimentary lunch provided daily at our NYC office Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. Position Overview We are seeking a Senior Production Test Engineer to lead the development and implementation of scalable, high-throughput test infrastructure for both our silicon photonics wafer-level production and our integrated LiDAR sensor end-of-line (EOL) testing. You will be responsible for defining and executing test strategies at multiple stages of the manufacturing process—at the wafer level for photonic devices, and at the module/system level for LiDAR units. This is a highly cross-functional role working closely with Systems, Photonics, Electrical, Firmware, and Manufacturing Engineering teams to ensure performance, yield, and reliability from prototype to volume production. Key Responsibilities * Define and implement end-of-line test strategies for LiDAR sensors, validating system-level performance (range, velocity, reflectivity, etc.). * Lead the development of photonic wafer-level test (WLT) strategies and tooling in collaboration with photonic design and foundry partners. * Develop automated test fixtures and software to support both EOL and WLT in a production setting. * Translate lab-level validation methods into robust and scalable production tests across optical, electrical, and mixed-signal domains. * Partner with external contract manufacturers and test vendors to stand up and scale production test infrastructure; support factory bring-up and operator training. * Drive test coverage, throughput, and cost optimization in both low- and medium-volume manufacturing. * Lead root cause investigations for test failures across the stack and work cross-functionally to implement fixes. * Own and continuously improve statistical process control (SPC), yield tracking, and test data analytics across the production lifecycle. * Support reliability and environmental testing (e.g. thermal cycling, vibration, shock) for product qualification. Qualifications * Bachelor’s or Master’s degree in Electrical Engineering, Optical Engineering, Physics, or a related discipline. * 5+ years of experience in production test engineering with a focus on LiDAR systems, photonic components, or optical sensors. * Proven expertise in system-level testing for LiDAR, imaging, or other complex electromechanical/optical systems. * Hands-on experience developing and deploying automated test setups (Python preferred), including test instrumentation and DAQ systems. * Proven track record in statistical process control, yield analysis, and high-volume data-driven decision-making. * Demonstrated experience owning test strategy and implementation in a manufacturing or pilot-line environment. * Familiarity with test methodologies for photonic integrated circuits or optical wafers (e.g., wafer probing, passive/active alignment, coupling efficiency). * Experience interfacing with contract manufacturers and external test vendors. Preferred Skills * Experience with FMCW LiDAR or coherent optical systems. * Familiarity with photonic wafer-level test equipment and alignment automation. * Exposure to MES systems, manufacturing analytics platforms, or test data infrastructure. What We Offer * Competitive salary and meaningful equity package * Comprehensive health benefits (Medical, Dental, Vision) * Unlimited PTO and paid company holidays * Team events and company meetups * Hybrid or remote work environment with monthly travel for remote employees. * Complimentary lunch provided daily at our NYC office Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description Key Areas of Responsibilities: • Work concurrently with cross functional departments to develop manufacturing processes that are robust, error-proofed, and efficient to perform., • Conduct time studies to aid in tracking product labor cost, line balancing, and productivity., • Lead pre-production build activity and oversees the design transition into full production., • Continually assess cost reduction opportunities with design, process, or material changes., • Facilitates the design and fabrication of basic tooling and fixtures to aid in manufacturing., • Provide manufacturing engineering feedback during product design reviews., • Create clear and concise work instructions, test instructions, detailed reports, and other documentation as required., • Assist in training Production Associates when requested., • Support Manufacturing Operations and help ensure daily production targets and metrics are met., • Assist in troubleshooting electro-mechanical system failures and help perform root cause analyses and corrective action., • Initiate Engineering Change Requests (ECR’s) and Engineering Change Notices (ECN’s)., • Work with the Design and Manufacturing Operations groups on resolving supplier quality issues., • Support the development of a safe, ergonomic, and environmentally sound workplace., • Work with customers and sales team to define requirements and scope of new products and translate them into working engineering specifications., • Able to lead small teams in problem solving sessions or lean kaizens. Skills and Experience: • Skilled practitioner of Lean Manufacturing and use of Six Sigma tools and methodologies., • Experience providing R&D groups improvement ideas and opportunities during the product development phase., • Hand-on experience developing box-build type Production lines., • Demonstrated flexibility, self-direction, and self-discipline in planning and accomplishing objectives and in meeting deadlines with limited supervision., • Experience writing clear and concise work Instructions for the Production personnel to use to properly build products., • Must possess a continuous-improvement mindset with a "Can-Do" attitude and actively seek solutions to problems, good team player with a pleasant personality., • Proficient in Microsoft Office, Visio, AutoCAD, or Solidworks experience is a plus., • Must have excellent problem-solving skills and possess good analytical, verbal, and written communication skills., • Familiarity with ESD prevention, IPC-A-610/J-STD workmanship standards, and Quality Management System Standards; ISO 9001 and 13485, and FDA standards knowledge and experience are desirable, • Proficiency using basic electronic test and measurement equipment including Calipers, Multimeters, Power Supplies, etc., • Ability to read and interpret mechanical drawings and electrical schematics., • Travel and working extended workdays as required to support Manufacturing Operations, • Must be able to lift up to 30 lbs. unassisted; must be able to sit and/or stand up to 8 hours per day uninterrupted.

Job Description Catalyx is seeking a skilled and detail-oriented Automation Engineer to support equipment and automation compliance activities within a regulated (GMP) pharmaceutical manufacturing environment. This role is responsible for change control documentation, system testing, troubleshooting, and ensuring compliance with internal procedures and regulatory standards. Key Responsibilities: · Prepare and update equipment and automation change control documentation in accordance with internal procedures. · Document all changes to automation and equipment software and documentation accurately. · Develop and execute testing protocols for automation and equipment changes. · Ensure compliance with system specifications by executing, documenting, and reporting on all testing activities. · Troubleshoot and resolve equipment malfunctions and testing discrepancies. · Maintain documentation of automation and operational maintenance activities. · Read and write ladder logic for automation systems; install and configure PLC and HMI applications from key vendors such as: · Allen-Bradley / Rockwell (RSLogix, FactoryTalk ME/SE, RSLinx) · Siemens (TIA Portal, WinCC OA) · Inductive Automation (Ignition) · Program using Python or similar scripting languages. · Configure OPC servers (e.g., Kepware) for system interconnectivity. · Manage network configurations including TCP/IP addressing and port assignments. · Assist with Windows server setup and maintenance activities. Requirements · Bachelor’s degree in Engineering, Computer Science, or a related technical field. · 3+ years of experience in automation engineering within a regulated pharmaceutical or biotech environment. · Strong working knowledge of PLC, HMI, SCADA systems, and related automation tools. · Familiarity with GMP, GAMP5, and SDLC principles. · Proficient in Python and industrial communication protocols (e.g., OPC). · Understanding of networking fundamentals and Windows server administration. · Excellent problem-solving and documentation skills. · Ability to work collaboratively across multidisciplinary teams. Why Join Catalyx? At Catalyx we understand that our people are our greatest asset. For this reason and many others, we take care of them. The team in Catalyx benefits from a Total Rewards package. This includes great personal benefits and professional growth opportunities. Catalyx is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all individuals are valued, respected, and supported. We do not discriminate on the basis of race, colour, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. We encourage applications from all qualified candidates, regardless of background, and strive to create a welcoming environment for everyone.

Job Description About Sherwood Design Engineers Sherwood is a civil and environmental engineering firm that is committed to investing in and embracing people, communities and the environment. Our team has delivered net zero energy and net zero carbon systems, net positive water systems, resilient coastlines, natural resource protection, green streets, living roofs and more for thousands of clients in the region and across the globe. We specialize in sustainable infrastructure, water management strategies, green building design, and systems based solutions for infrastructure and landscapes. Our focus is on the conservation and management of the consumption of all site resources — carbon, energy, water, and waste. We’ve worked on over thirty award-winning projects, and our work has been published locally and internationally. Founded in 2003, our award-winning projects include Hudson Yards in New York (the largest private real estate development in U.S. history), San Francisco Better Streets Plan, Greater New Orleans Urban Water Plan, revitalization of the iconic waterfront Brooklyn Bridge Park, and the 35 square-km Baietan Urban Area Plan in the heart of Guangzhou, China. Our mission is to engineer an environmentally and socially regenerative planet. Will you join us? Role Summary Sherwood is a mid- to senior-level Geometry Specialist to join our dynamic, multidisciplinary computational design team. Ideal candidates will demonstrate deep expertise in at least one of the following focus areas, with the flexibility to contribute across both: Managing Geometric Workflows within Rhino and Revit: This role involves coordinating geometry integrations into Rhino and Revit from various software platforms, including Civil 3D, GIS, and others. Candidates should be skilled in developing and customizing computational workflows that span from model creation to sheet production, including managing geometric attributes and metadata. Computing Complexity: This focus involves translating intricate site design and engineering challenges into clear geometric form-solutions that include landform, ecological materials-based, urban massing, conceptual infrastructural, architectural, etc. Model deliverables often feature complex, wild, and dynamic aesthetics; however, the ability to distill complexity into compelling, idea-rich geometric solutions is highly valued. Rapid iteration and prototyping capabilities of geometric concepts are essential. Minimum Skills • Typically 4+ years of experience, • Bachelor’s degree required in a technical or design-related field. We welcome candidates from either:, • Technical-focused fields (Design Technology, Computational Design, BIM, or related fields) with strong design sensibility and demonstrated interest in computational solutions for wild, fluid, ecological, or dynamic environmental, urban, and infrastructure projects; or, • Design-focused fields (Urban Design, Architecture, Landscape Architecture, or related fields) with demonstrated technical skills in 3D modeling, environmental simulation, and prototyping., • Technical Proficiency in Revit/Dynamo, Rhino/Grasshopper., • Demonstrated experience developing computational workflows and custom solutions to support AEC projects., • Strong attention to detail and proven ability to coordinate effectively across disciplines and project phases. Preferred Skills • Advanced Degree - Masters &/or PhD in a technical or design-related field, • Familiarity or experience with adjacent technologies is highly valued (Environmental simulation: CFD, Ladybug; Geospatial: GIS; Civil Infrastructure: Civil 3D; VFX and Procedural Modeling: Blender, Unity, Houdini; Fabrication: Robotics, Additive Manufacturing, Sensors and Electronics; AI/ML for 3D assets: Gaussian Splatting)., • Computational Prototyping and Visualization: Develop prototypes, models, and visualizations to clearly communicate computational design approaches, supporting informed decision-making and guiding the team's design process., • Cross-Disciplinary Collaboration: Partner with civil engineers, ecologists, urban designers and stakeholders, utilizing computational expertise to ensure clear communication and integrated data workflows, delivering holistic solutions for environmental and urban engineering projects., • Complex Geometry / Model Development: Developed algorithmic models to generate and control highly complex forms (e.g., wild materials, aggregate, rock, complex physics driven or freeform topography), maintaining full parametric control throughout the design lifecycle and translating to meta-data / BIM and construction documentation sheets & bills of materials, as the basis for downstream detailing and fabrication across interdisciplinary teams., • Interoperability & Tool Integration: Developed geometry data exchange workflows across platforms like Rhino-Grasshopper, Revit, and Blender., • Authored scripts: (Python, C#, or GH plugins) to automate repetitive geometry creation tasks and improve cross-software collaboration. Maintain libraries of reusable scripts and components for standardizing complex geometry generation., • Own a part of the firm with ESOP eligibility after one year, • Flexible working - with every other Friday off, • Competitive Health plans, including PPO and HMO options, Dental and Vision plans, • Learning and Development stipend to use as you see fit, • Generous PTO and 8 paid holidays, • Automatic 401k enrollment, • Fun team events, lunches and happy hours to get to know colleagues outside of work, • A tangible opportunity to truly help the environment! Compensation: The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions, including but not limited to: skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Sherwood Design Engineers, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is $78,000-$181,000. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. Reasonable accommodations may be made to individuals with disabilities to perform the essential functions. We will consider for employment qualified applicants with arrest and conviction records. Powered by JazzHR D5EhOcJlPs

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for an Product Development Engineer to join our collaborative team in Elmwood Park, NJ. In this key role, you’ll help shape and guide the development of new and existing aerospace products, working closely with the team. As a Product Development Engineer, you will: • Review customer requirements, specifications, and documentation to ensure accuracy and compliance., • Translate customer input into actionable plans using our internal systems., • Complete development documentation including checklists, travelers, and work instructions., • Lead and coordinate team meetings to align on development timelines and deliverables. Qualifications • Proven working experience as a quality/product engineer or in a related field., • Experience in blueprint reading and spec interpretation., • Must be comfortable in a manufacturing environment often fast-paced, loud and requires proper PPE., • Work well within a team., • Creative and innovative thinking skills., • Problem-solving skills. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Design Engineer, Decorative lighting , Bronx, NY Here at HB Architectural Lighting, we manufacture large- and small-scale, custom decorative light fixtures for public spaces, guest rooms, restaurants, places of worship, universities, high-end residences, and more. Based in Bronx, New York, our 30,000 square foot factory is vertically integrated with state-of-the-art, automated, and hand-operated machinery. Our highly skilled team turns conceptual designs into manufacturable products using various manufacturing techniques including CAD drawing, laser cutting, CNC machining, hand-forming metal, welding, polishing, hand finishing, and shade making. The Candidate will be responsible for: • Converting sketches developed by our customers, into a manufacture-able product using AutoCAD and or Solidworks software, • Be able to produce accurate part drawings, Detailed and Bills of Materials in the format established by our company standards, • Work with our Manufacturing team and Project Manager(s) throughout the manufacturing process to ensure the product meets the customer's expectations.

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . Description: The Senior Process Engineer or Process Engineer II will support and lead manufacturing process development and optimization for our medical device products. This position plays a key role in ensuring that all manufacturing processes meet quality, compliance, and performance standards. The engineer will work closely with cross-functional teams including Quality, R&D, Regulatory, and Production developing, optimizing, and scaling manufacturing processes to improve yield, throughput, quality, and efficiency. The Process Engineer will have a strong operational, quality, and technical background. This is often a hands-on role working closely with the production team to train operators to new processes, troubleshoot equipment challenges, and write and execute qualifications and validations. This is a full-time, on-site position, located in Brooklyn, New York. It is a multi-faceted role in a highly collaborative environment that will require creativity and focused execution in pursuit of maximizing production outputs and creating robust manufacturing processes. Responsibilities: · Design, develop, and optimize manufacturing processes for new and existing medical devices. · Lead process development for new product introductions (NPI), from concept through validation and launch. · Develop and refine manufacturing processes to reduce variation, increase yield, improve cycle times, and reduce cost. · Evaluate and implement automation technologies to improve process consistency and throughput. · Interface with external vendors and suppliers to specify new equipment, product or process requirements, or troubleshoot product issues. · Analyze production data to identify trends, root causes, and opportunities for efficiency. · Maintain and update validation documentation as part of lifecycle management. · Ensure processes comply with applicable regulatory requirements and internal quality standards. · Lead root cause investigations (CAPA, NCRs, SCARs) and implement corrective and preventive actions. · Develop process documentation including standard operating procedures (SOPs), work instructions, pFMEAs, and equipment qualifications. · Partner with R&D during design transfer to ensure design for manufacturability (DFM) and seamless product integration. · Collaborate with Quality and Regulatory teams to support audits, inspections, and compliance initiatives. · Provide technical leadership and mentorship to junior engineers and technicians (for Senior level). · Monitor and analyze key process indicators (KPIs), quality metrics, and manufacturing data · Specify, procure, and validate manufacturing equipment and tooling. · Author and execute process validation protocols (IQ/OQ/PQ) in accordance with FDA and ISO 13485 standards. · Train manufacturing personnel on new or revised processes and equipment. · Provide ongoing floor support for manufacturing operations, helping to resolve technical issues in real time. · Other duties may be assigned as deemed necessary by management Requirements · Bachelor’s degree in Chemical Engineering, Mechanical Engineering, Biomedical Engineering, or related field. · Process Engineer II: 5+ years of experience in a regulated manufacturing environment with 3+ years process development, design, and process implementation required. · Senior Process Engineer: 10+ years of experience in a regulated manufacturing environment with at least 5 years hands-on experience in process development, design, and process implementation required, preferably in medical device, pharmaceutical, or biotech manufacturing. · Understanding of FDA 21 CFR Part 820, ISO 13485, and GMP requirements. · Proven experience with process validation (IQ/OQ/PQ), root cause analysis, and CAPA. · Proven experience in process design, optimization, and troubleshooting. · Experience implementing process and quality improvements into manufacturing or CMO · Strong analytical and problem-solving skills. · Ability to multitask and prioritize work, while remaining detail-oriented. · Demonstrated experience training technical personnel. · Familiarity with data analysis tools and manufacturing software. · Demonstrated ability to design experiments and analyze data with the use of appropriate quality and statistical methodologies. · Experience with Lean Manufacturing, Six Sigma, or similar methodologies. · Hands-on experience with manufacturing processes such as formulation, fill and finish, packaging, and CIP. · Ability to handle multiple project assignments of medium scope and complexity and able to prioritize and complete work with a sense of urgency in a timely manner. · Demonstrated experience managing third-party vendors and service providers. · Demonstrated ability to work independently as well as be a strong team contributor. · Ability to effectively work within a team and cross-functionally to expedite the completion of critical project tasks. · Excellent verbal and written communication skills required. · Ability to become gowning qualified to work in a cleanroom environment. · Ability to speak, listen, and understand verbal and written communication in English. · Ability to lift 30 pounds of force occasionally and to lift, carry, push, pull, or otherwise move objects. · Strong computer skills, with proficiency in the use of Microsoft Excel, Microsoft Word, Microsoft PowerPoint. · Legal authorization to work in the United States. Preferred Qualifications: · Master’s degree in Engineering or related field. · Experience in medical device or pharmaceutical · 3+ years of relevant cGMP manufacturing experience. · Experience in cleanroom operations, including aseptic processing. · Experience with CMOs. · Significant experience with CAD software · Experience in supporting regulatory inspections and audit readiness. · Six Sigma certification (Green or Black Belt) or Lean Manufacturing experience. · Mechanical/Electrical knowledge with the ability to troubleshoot equipment · Strong leadership skills with the ability to influence and motivate a cross-functional team · Organizational and time management skills with the ability to prioritize a variety of tasks/projects. · Demonstrated understanding of aseptic processing and microbial control concepts. Benefits Competitive annual base salary range of $90,000 - $150,000, depending upon job level and qualifications. · Paid Vacation, Sick, & Holidays · Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage · Company Paid Life and Short-Term Disability Coverage · Work/Life Employee Assistance Program · 401(k) & Roth Retirement Savings Plan with company match up to 5% · Monthly MetroCard Reimbursement Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description Job Overview: A large Manufacturing plant in NJ is looking for a Senior Industrial/Process Engineer to lead efforts in optimizing production systems, improving workflows, and driving technical process innovations across our high-volume manufacturing plant. This role combines hands-on engineering expertise with strategic leadership, ensuring that operations run efficiently, safely, and at scale. The ideal candidate should bring strong technical capability, design and optimize facility layouts to maximize space utilization, streamline material flow, and support scalable production, and the ability to guide teams through continuous improvement initiatives. Key Responsibilities:  Analyze production schedules, workflows, and system specifications to maximize throughput, efficiency, and quality.  Design and optimize facility layouts, focusing on space utilization, equipment placement, and material flows.  Drive process upgrades, automation, and system enhancements.  Define and enforce technical and production standards with cross-functional teams.  Implement control systems that reduce downtime, cost, and variability.  Prepare cost models, equipment specifications, and capital expenditure justifications.  Act as a technical leader for the Continuous Improvement (CI) team, mentoring engineers and operators.  Train staff on new technologies, standards, and best practices.  Promote a data-driven, problem-solving culture across the plant. Qualifications:  Bachelor’s degree in industrial/Process Engineering or related field (required).  Significant experience in manufacturing process design, optimization, and improvement.  Advanced knowledge of production machinery, automation, and system layouts.  Strong technical skills, including, MS Office, and process modeling tools (with AutoCAD optional).  Proven ability to lead technical projects and elevate team capability.  Excellent analytical, communication, and leadership skills. Company DescriptionRecruiting CompanyRecruiting Company

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks an Electrical Engineer to join our dynamic team. This position is available for an immediate start and offers an excellent growth opportunity for a candidate eager to contribute their expertise and drive impactful results. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days. · Utilize advanced software tools like AutoCAD and Autodesk Inventor to create detailed electrical schematics and control diagrams for switchgear systems. · Develop comprehensive electrical schematics, wiring diagrams, and control diagrams to support production and streamline the manufacturing process. · Collaborate with engineering, production, and quality teams to ensure that designs meet specifications and are optimized for manufacturability and reliability. · Participate in the selection and specification of switchgear components, including circuit breakers, contactors, transformers, and other electrical components, to ensure optimal performance and compliance with relevant standards. · Prepare detailed bills of materials (BOM) and wiring diagrams, ensuring accuracy and completeness to facilitate the manufacturing process. · Work closely with mechanical engineers, technicians, and other team members to integrate electrical systems with mechanical components for cohesive functionality. · Troubleshoot and resolve design and manufacturing issues in collaboration with cross-functional teams. · Stay current with industry standards, best practices, and emerging technologies in switchgear design and manufacturing, ensuring designs comply with ANSI, UL, and National Electrical Code (NEC) standards. · Maintain accurate documentation of design processes, updates, and revisions. Conduct thorough reviews and quality checks on designs to ensure precision and adherence to standards. Requirements: Skills, Requirements, and Specifications · Minimum of 3+ years’ experience in the electrical distribution industry, including electrical switchgear experience. · Familiarity with major brands in the industry (Schneider, ABB, Eaton) · Proficient in AutoCAD and Autodesk Inventor for electrical schematics and design. · Demonstrated ability to work effectively as part of a team in a fast-paced environment. · Strong interpersonal skills to facilitate collaboration and problem-solving. · Exceptional attention to detail, ensuring accuracy and quality in design work. · Solid understanding of ANSI and UL standards relevant to switchgear. Education: Bachelor or Masters Electrical Engineering Degree

Job Description Maiden Home is growing a team of forward-thinking individuals who possess unique strengths and perspectives, an innate ability to inspire their colleagues, and an eagerness to reimagine the world of luxury furnishings. As our Design Engineer of Product Integrity, you will be responsible for our Product Quality and Repair & Warranty function — owning both individual customer quality concerns, and programmatically driving continuous improvement of our product portfolio. This role will lead issue tracking (via our MIRT system), grow to own all root cause analysis, serve as the go-to subject matter expert on customer-facing quality concerns, and partner closely with Product, Ops, and Customer Care to drive product improvements. You'll lead initiatives to reduce transit damage and warranty issues through product redesign, packaging updates, process improvements and partner management. Success requires strong analytical thinking, clear communication, aesthetic alignment with our brand, and a deep understanding of our customer. This is a high-impact role for someone with exceptional technical skills, relationship savvy, and a bias toward action. This is a unique opportunity to join a brand that is primed for its next stage of growth–with a proven competitive advantage in its ability to attract, motivate and retain top talent across a range of disciplines. At Maiden Home, you’ll find a workspace that encourages innovation, creative expression, and teamwork, and your experience will be shaped by your performance, contributions, and drive. This role is located at our New York headquarters, located in the TriBeCa design district. Responsibilities • Lead the repair and warranty function, tactically owning all repair & replacement paths forward, setting decision frameworks, managing a specialist network, and driving KPI improvements in cost and customer outcomes., • Own and evolve the Master Issue Resolution Tracker (MIRT), maintaining all tagging and updates while serving as the subject matter expert on customer issues and insights., • Analyze and surface root causes and recurring themes from customer feedback and claims, providing actionable insights to Product, Ops, and Customer Care teams., • Drive cross-functional projects to reduce transit damage and warranty claims, including SOP updates, packaging improvements, and counter-sourcing initiatives., • Partner with the Product team and manufacturing vendors to identify and implement product and packaging improvements, including proposed redesigns., • Act as a strategic thought partner across teams, balancing tactical execution with big-picture thinking and emerging trend identification., • Embed brand and customer perspective into all product, packaging, and resolution decisions, ensuring outcomes align with MH’s aesthetic and service standards., • Track, report, and influence spend and cost-saving metrics, maintaining a data-informed mindset and proactively adjusting strategy based on trends., • Communicate clearly and cross-functionally, ensuring alignment and accountability across departments and external partners., • 2-5+ years of professional experience in a high growth, high accountability role, • Bachelors degree in engineering or furniture design, • Knowledge of AutoCAD, Rhino, Solidworks or equivalent 3D engineering software, • Prior experience with packaging preferred, • Bias for action, hustle, and continuous improvement in pursuit of long-term solutions, • High attention to detail, particularly in tracking spend, trends, and operational metrics, • Proven ability to manage complex projects with multiple stakeholders, competing priorities, and tight timelines, • Exceptional written and verbal communication skills with the ability to influence cross-functionally, • Customer-first mindset with demonstrated empathy and problem-solving orientation, • Ability to identify root causes, recognize patterns, and translate insights into strategic action, • Comfortable navigating ambiguity and driving clarity through process and documentation, • Strong relationship-building skills, both internally and with external partners or vendors, • Aesthetic and brand awareness that informs product and packaging-related decisions Maiden Home is an authority in the world of luxury home furnishings. The brand designs original pieces at its New York studio, sources exquisite materials from trusted partners around the world, and works directly with distinguished artisans to bring them to life—then, it delivers them with prices and lead times that are unheard of in the furniture industry. Maiden Home’s unwavering commitment to exceptional design and quality is praised by leading interior designers and publications including Architectural Digest and Elle Decor, and it has brought the brand consistent year over year growth. Maiden Home is proud to be an equal opportunity employer. We are committed to building a diverse and inclusive culture. We do not discriminate on the basis of race, religion, color, national origin, gender, gender identity, sexual orientation, age, marital status, disability, protected veteran status, or any other legally protected characteristics. Anticipated Salary: $80,000 - $120,000 Powered by JazzHR fgmdHTAAeq

Job DescriptionAbout the job Seeking an experienced Product Development Manager with a strong background in engineering and project management to lead the development and innovation of Class I and Class II medical devices, particularly in the areas of RF generators, RF electrodes, endoscopic instruments, endoscopes, and drill systems. The ideal candidate will have significant expertise in medical device development, regulatory compliance, cross-functional project management, strong understanding of engineering, and supplier development and collaboration. Proven leadership skills are essential as the role will also involve working with our internal engineering team, cross functionally throughout the organization as well as clients and vendors both domestic and international to ensure the successful execution of projects. Key Responsibilities: • Lead, mentor and leverage a multidisciplinary team of engineers to establish product objectives, timeline and resources while fostering a culture of collaboration innovation and continuous improvement., • Troubleshoot/resolve issues and ensure task completion by establishing priorities validating solutions and reaching a conclusion with functional managers and team members., • Contribute as a leader to the strategic direction of product innovation, focusing on cutting-edge technologies while providing regular updates to senior management., • Oversee the design, prototyping, testing, and validation of medical devices, including RF generators, electrodes, endoscopes, drill systems, instrumentation, etc. Interact with clients (surgeons) and senior leadership for ensuring adherence to design controls and quality standards., • Ensure compliance with FDA, ISO, IEC, and other relevant standards and regulations worldwide during the product development process., • Plan, execute, and track R&D projects, ensuring timely delivery, meeting product specifications, and adhering to budgets., • Collaborate with cross-functional teams including Marketing, Sales, R&D, Regulatory Affairs, Quality Assurance, and manufacturing, to ensure the final product meets market needs and regulatory requirements, • Prepare technical documentation (e.g., design history files, risk management files, and verification/validation protocols) for regulatory submissions, • Partner with Regulatory Affairs to prepare submissions for FDA 510(k) or other regulatory approvals for medical devices, • Drive research of new materials, components, and manufacturing techniques to improve product performance, reduce costs, and ensure patient safety, • Partner with surgeons, physicians and industry professionals for clinical and device feedback to ensure product optimization for both surgeons and their patients., • Collaborate with domestic and international vendors/suppliers to identify, develop, and deliver necessary components, materials, and technologies for medical device projects, • Manage relationships with external suppliers and vendors, ensuring compliance with product specifications, quality standards, timelines, and cost structures, • Lead efforts for the search and evaluation of new or suitable suppliers/vendors to ensure access to high-quality materials, innovative technologies, and competitive pricing for product development, • Coordinate with suppliers to ensure that design requirements are communicated and met, and that all necessary certifications and documentation (such as material safety data sheets, regulatory approvals, etc.) are provided, • Stay current on industry trends, emerging technologies, and best practices related to medical devices, specifically in Class I and Class II devices, • Education: Bachelor’s or Master’s degree in Biomedical Engineering, Mechatronic Engineering, Mechanical Engineering, Electrical Engineering, or a related field. A Ph.D. is a plus, • 10+ years of experience in the medical device industry, with at least 5 years in R&D leadership roles (Manager), • Extensive hands-on experience in the development of Class I and Class II medical devices, including devices such as RF generators, RF electrodes, instrumentation, endoscopes, and drill systems, • Strong background in engineering disciplines such as electrical, mechanical, and/or biomedical engineering with expertise in medical device design and development, • Expertise in medical device design controls, risk management, project management, continuous improvement and validation/verification processes, • Strong understanding of engineering knowledge such as GD&T Principals and ability to read and interpret technical drawings., • In-depth knowledge of regulatory standards such as FDA 510(k), ISO 13485, IEC 60601, and other applicable medical device regulations, • Excellent communication, leadership, and problem-solving skills, with the ability to manage a diverse team, complex projects and collaborate across multiple departments, • Supplier and vendor management experience (domestic and international), with the ability to assess and select new suppliers, manage performance, and resolve any supply-related issues efficiently, • Computer Programs: MS Office Suite, SolidWorks, Project Management Programs, AUTOCAD, Unigraphics, NX, Creo, CATIA., • RF Engineering Knowledge: Familiarity with RF energy applications, design considerations for RF generators and electrodes, and related technologies in the medical device space, • Endoscopic Technologies: Experience with endoscopic instrument design, optics, and surgical tool integration, • Material Science: Knowledge of biocompatible materials and component selection for medical devices, particularly for implantation or prolonged exposure to the human body We value the diversity of our team and inspire creativity in our innovation. elliquence proudly provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any kind without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state and local laws. We are committed to working with and providing reasonable accommodation to individuals with disabilities. If you need any reasonable accommodation due to a disability for any part of the application process, please email . Powered by JazzHR wFf7vENGmg

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . Description: The R&D Engineer I/II is responsible for supporting product design and process development activities while ensuring compliance with all quality and regulatory requirements. The position has a scientific focus that includes implementation of formulation development through process development, prototype fabrication, and characterization, along with additional process evaluation and data generation through designed experiments. Process development in an R&D environment will be followed by qualification and technology transfer into manufacturing. Collaboration is a key aspect of this role, as the engineer will work within a multidisciplinary team of researchers and engineers. The position offers diverse opportunities in a collaborative cross-functional environment, requiring adaptability, flexibility, and a willingness to learn and innovate in the exploration of new technologies, new approaches, and techniques in pursuit of product/process robustness and innovation. The R&D Engineer I/II is expected to possess expertise in areas including, but not restricted to, polymer, chemical, material science, and process development and engineering. Additionally, they will assist in generating documentation essential for regulatory submissions, ongoing publication initiatives, and direct communication with the Head of Research regarding various tasks. This is a full-time, on-site position, located in Brooklyn, New York. This role is an independent contributor role (i.e. no direct reports). Level is dependent on experience. Responsibilities: • Oversee the planning, implementation, and analysis of experiments relevant to project objectives. Ensure the application of established scientific and engineering principles to solve complex problems and challenges innovatively and efficiently, adhering to rigorous scientific methodologies and protocols., • Create and execute product/process enhancement, and new product/process development plans., • Lead material/design/process changes and their implementation with well-documented research/analyses. Process and analyze results,, • Author protocols and reports including engineering studies and design verification/validation activities., • Aid in the development and execution of testing methods to aid in exploratory research, product/process development, and quality control; conduct chemical and mechanical property evaluation tests to assess the desirability of process or formulation changes., • Prepare samples as required for manufacturing, testing, or other evaluations and data analysis., • Participate in voice-of-customer (VOC) labs and other user needs assessments., • Interface with external vendors, customers, and suppliers. Specify equipment and process requirements for developing and implementing new products, product improvement and new equipment/processes., • Support process and product transfers to manufacturing or CDMOs., • Maintain a laboratory notebook and other technical documentation according to required GLP/GMP guidelines., • Understand and prioritize process improvements, design experiments to make those improvements, and execute these plans in the laboratory., • Maintain active dialogue with Regulatory Affairs as subject matter expert on all product design elements/documentation about research towards FDA/regulated authority submissions., • Provide support to the marketing and sales team, with the development of presentations, sales tools, and application data., • Work with company leadership to evaluate existing research practices and contribute to a culture of ethical, high-quality research operations within the organization. Required Qualifications • Education: BS in Chemical Engineering, Polymer Engineering, Material Science & Engineering, or related engineering discipline., • Minimum 4+ years previous experience in an industrial environment with a BS degree. (2 years minimum experience if advanced degrees)., • Proficiency as an adept experimentalist with hands-on experience in the process development of polymeric materials and their characterization in an R&D or manufacturing environment., • Mathematically inclined with strong analytical and problem-solving skills with the ability to be observant and to think creatively. Demonstrated ability to design experiments and analyze data with the use of appropriate quality and statistical methodologies. Demonstrated ability to work independently as well as be a strong team contributor. Ability to effectively work within a team and cross-functionally to expedite the completion of critical project tasks., • Requires understanding of product/process design and engineering. Experience should include process development/validation and/or transfer/verification, protocols, and troubleshooting skills., • Ability to handle multiple project assignments of medium scope and complexity and able to prioritize and complete work with a sense of urgency on time., • Ability to lead directly and by influence, including strong problem-solving, conflict resolution, and analytical skills., • Working knowledge of Good Documentation Practices (GDP) and Good Manufacturing Practices (cGMP) requirements., • Proficiency in the use of Microsoft Office, Microsoft Excel, Microsoft Word, Microsoft PowerPoint is required., • Requires excellent written and verbal communication and presentation skills., • Legal authorization to work in the United States is required., • Physical Requirements include:, • Aseptic Gowning Qualification: Able to be successfully qualified for aseptic gowning, including successful respirator training., • Wear Appropriate Personal Protective Equipment (PPE):, • Be able to stand and walk for prolonged periods, with the ability to climb, balance, stoop, bend, reach, and handle equipment., • Ability to speak, listen, and understand verbal and written communication., • Possesses hand-eye coordination and manual dexterity for delicate manipulations., • Ability to lift up to 50 pounds occasionally and to carry, push, pull, or otherwise move objects., • Visual acuity is required for performing close and distant activities. Preferred Qualifications • An advanced technical degree (MS or PhD)., • ·Lab experience in an industry setting within cGMP-regulated environments., • Prior experience developing processes and scaling these up into manufacturing or CDMO, • Mechanical/electrical knowledge with the ability to troubleshoot processing equipment, • Six Sigma green belt or black belt certification preferred., • Experience implementing process and quality improvements in a manufacturing environment, • Work experience with the medical device or pharmaceutical industries, • Working knowledge of ISO 9001, ISO 13485:2003 and ISO 14971:200., • Working knowledge of FDA requirements as per 21 CFR 820. Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time. Benefits • Competitive annual base salary range of $70,000 - $120,000, depending upon job level and qualifications, • Paid Vacation, Sick, & Holidays, • Monthly MetroCard Reimbursement, • 401(k) & Roth Retirement Savings Plan with company match up to 5%, • Work/Life Employee Assistance Program, • Company Paid Life and Short-Term Disability Coverage, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage

Job Description The role of Application Engineer / Service Technician at Royal Master Grinder involves many different disciplines. Primarily it involves the interaction between all disciplines within the company to bring a project to conclusion and implementation for the end user. This involves working with our engineering, assembly, sales and customer service departments. The ultimate result of this is the completion of the customer’s factory acceptance test as well as installation at the customer facility. Requirements for this job is a good mechanical aptitude, communication skills, and a desire to learn. Every application that you will work on is different thus challenging. Key Responsibilities:

Job Description Job Description Job Title: HVAC Design Engineer Location: Mount Vernon, New York Company: ICE AIR, LLC and Affiliates (“Ice Air”, the “Company”, “We”) About Us: ICE AIR is a manufacturer of innovative HVAC solutions serving the North America market. We are dedicated to providing reliable, quality, energy-efficient equipment for all new construction, replacement and retrofit projects. Position Overview: We are seeking a Design Engineer with a strong mechanical engineering background to join our product development team. This role focuses on the design, modeling, and development of HVAC systems and components. The ideal candidate is creative, detail-oriented, and enjoys working through the entire design cycle—from concept development and CAD modeling through prototyping, testing, and final production release. You will collaborate closely with cross-functional teams including manufacturing, supply chain, and sales to deliver high-performance HVAC solutions that meet customer and regulatory requirements. Key Responsibilities: • Design and develop new HVAC products and components, with emphasis on innovation, energy efficiency, and manufacturability., • Create detailed 3D CAD models and engineering drawings (SolidWorks or similar) for new designs and product improvements., • Support prototype development, assembly, and validation testing., • Work with various regulatory and industry organizations for testing and certifications, • Work with offshore and internal engineering teams to coordinate design and development efforts., • Work with sales, marketing, manufacturing, finance, supply-chain and other departments Required Skills • Strong CAD design skills utilizing SolidWorks or similar CAD experience, • Bachelor's degree in mechanical engineering or similar field, • 2 to 5 years of working in the HVAC industry, manufacturing, electronics, or similar industries, • Team player, • Structured and organized mindset, • Excellent professional communication skills, • Understanding of thermodynamics, heat transfer, and fluid mechanics as applied to HVAC systems., • Strong analytical and problem-solving skills with the ability to balance theoretical and practical considerations., • Ability to work with minimal supervision, • Familiarity with electronic controls or system integration., • Competitive salary, bonus, and benefits package., • Significant long-term growth opportunity., • Collaborative and supportive work environment.

Job Description Job Description Job Title: Quality Engineer Location: Mount Vernon, New York Company: ICE AIR, LLC and Affiliates (“Ice Air”, the “Company”, “We”) About Us: ICE AIR is a manufacturer of innovative HVAC solutions serving the North America market. We are dedicated to providing reliable, quality, energy-efficient equipment for all new construction, replacement and retrofit projects. Position Overview: This is a critical role to ensure highest quality in our product offering, both pre and post sales. We work as a closed knit team in fast paced environment where everyone is expected to wear multiple hats. This requires deep diving into engineering theories one day and traveling to job sites the next with hands on diagnostics and debugging. The role requires excellent communication skills, both verbal and written. Successful candidate must be a people person to be able to work with various internal and external customers. Key Responsibilities: • Work with sales, marketing, manufacturing, finance, supply-chain and other departments, • Work with various regulatory and industry organizations for testing and certifications, • Work with offshore engineering teams, • Maintain quality logs and dashboard, • Analyze field issues for trends, • Develop short- and long-term solutions, • Generate reports for both internal and external customers Qualifications: • Bachelor's degree in mechanical engineering or similar field required, • Bachelor’s degree in mechanical engineering or similar field, • SolidWorks or similar CAD experience, • Team player, • Structured and organized mindset, • Excellent professional communication skills, • Ability to work with minimal supervision, • HVAC industry experience is a plus, • Knowledge of electronic controls, • Competitive salary, bonus, and benefits package., • Significant long-term growth opportunity., • Collaborative and supportive work environment.

Job Description Job Title: Production Support Engineer II Department/Division: Engineering Reports to: Manager- Mechanical Engineering About LTS: LTS Lohmann Therapy Systems is a premier, global Contract Development and Manufacturing Organization (CDMO) and partner the pharma industry trusts most to deliver innovative oral, transdermal, and intradermal drug delivery systems. From concept to market, launch to lifecycle management, we deliver single source oral and transdermal drug delivery solutions that power partners’ market advantage. Every one of our 1,000 plus members of the LTS family, across three continents, is focused on utilizing our collective strength and innovation to explore new therapeutic opportunities, maximize partner value and improve patient outcomes. We Care. We Create. We Deliver. Job Summary: As a Production Support Engineer, you’ll provide mechanical engineering services in a pharmaceutical manufacturing environment. You’ll support plant maintenance teams and ensure the efficient service of production machinery, equipment, utilities, and facilities—all while focusing on production uptime and metric improvements. This is a full-time onsite position located in West Caldwell, NJ • This role supports our 1st shift starting between 7:00am to 9:00am for 8 working hours Monday through Friday, • Some on-call required What You Will Do: • Spend days "on the floor" troubleshooting and resolving production issues to manufacturing maintain continuity., • Support spare parts management, procurement, and inventory., • Lead small equipment improvement projects and vendor evaluations., • Write and execute GMP documentation including SOPs, CAPAs, and Change Controls., • Support maintenance planning and preventive calibration., • Maintain engineering documentation and technical libraries., • Serve as a subject matter expert across various manufacturing systems., • Bachelor’s degree in Mechanical Engineering or related field., • 2-3 years of experience in pharmaceutical, manufacturing, or packaging preferred, • Strong customer service orientation, • Strong mechanical and mathematical skills., • Basic computer and communication skills., • Ability to wear required PPE and lift up to 24 lbs., • Experience with Minitab/AutoCAD helpful., • Ability to visualize and troubleshoot equipment issues., • Experience integrating new innovations into existing methods., • Knowledge of GMP protocols and regulatory compliance., • Strong documentation and organizational abilities., • Leadership and collaboration across global teams. If this sounds like you, we want to hear from you! LTS is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role As a Field Process Engineer I at Weee, you will drive initiatives to optimize operational processes, improve efficiency, and deliver world-class customer experiences. This role requires strong analytical skills, project management expertise, and the ability to collaborate across multiple teams and stakeholders to execute scalable solutions in a fast-paced, dynamic environment. Responsibilities • Lead small-scale cross-functional projects focused on operational excellence and process improvement., • Partner with Central PE to identify and track operational metrics., • Collaborate with Operations, Supply Chain, and PE teams to implement solutions that improve workflow efficiency and reduce costs., • Identify and address basic root causes in current processes, create corrective action plans to achieve operational goals and ensure alignment with operational standards., • Help implement solutions and provide training to address operational challenges., • Conduct time studies and analyze data to identify trends, root causes, and opportunities for system and process improvement., • Collaborate with the central PE team and operation team to develop and maintain the standard operating procedures (SOPs) and work instructions., • Proactively mitigate safety risks within the production process, ensuring adherence to safety protocols., • Support warehouse daily operations as needed including 5S maintenance, equipment forecasting and management, • Bachelor's degree in Business, Operations, Supply Chain, Engineering, or a related field., • 1+ years of experience in internships or project management within operations, supply chain, or logistics., • Strong analytical skills with experience in data analysis tools (e.g. Advanced Excel)., • Understanding of basic concepts of lean manufacturing, continuous improvement, and Six Sigma, • Ability to work Individually with observation and analysis tools (e.g. DMAIC, fishbone diagram), • Excellent communication skills with the ability to present complex ideas clearly to both technical and non-technical audiences., • Proven ability to manage multiple priorities and work effectively in a fast-paced, ambiguous environment., • Ability to work under extreme temperatures(0~30°ree;F) in Freezer/Cooler environments, • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • The US base salary range for this full-time position is $63,000 - $74,000, • This role may be eligible to discretionary bonus, incentives and benefits Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job Description Our client in East Hanover, NJ is seeking an onsite Direct Hire Manufacturing Engineer. Salary: 125K Requirements: • BS degree in Mechanical Engineering, Manufacturing/Industrial Engineering, or equivalent., • Over 2 years of experience in a medium/high volume manufacturing environment., • Strong understanding of Continuous Improvement, Six Sigma, 5S, and Lean manufacturing tools., • Comfortable with hands-on interaction with mechanical and electrical components.

Job Description About Voyant Photonics Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. With Voyant, the next generation of machines can see, understand, and navigate the world like never before. Discover how we’re redefining what’s possible by making real products out of cutting edge research in silicon photonics. Position Overview In this Lead Mechanical Engineer (product design) role, you will lead the end-to-end mechanical design of our LIDAR products, going beyond individual components to define how the full system comes together. This includes integrating electrical, optical, and thermal subsystems into a cohesive, manufacturable, and robust product architecture. We are looking for a mechanical engineer who embodies true product ownership—someone who can think at the system level, drive key design decisions, and take responsibility for how all the physical elements of the product interconnect. You will own the physical layout and mechanical design decisions that drive performance, reliability, and usability across the entire device. Key Responsibilities * Lead as the center of gravity for mechanical product design, ensuring the mechanical system reflects product intent, performance requirements, and cross-functional constraints. * Own the end-to-end mechanical architecture of the product, integrating optical packaging, optical lenses, electrical PCB's, and thermal solutions into a cohesive, manufacturable design. * Develop compact, rugged, and IP-rated enclosures for LiDAR sensors that meet environmental and mechanical requirements (shock, vibration, ingress protection, etc.). * Design precision mechanical components and assemblies for optical elements such as lenses and mirrors. * Model and implement cooling strategies to manage thermal loads. * Create detailed 3D models, engineering drawings, and BOMs using tools like SolidWorks or Creo. * Rapid prototype mechanical designs and support validation through thermal, mechanical, and environmental testing. * Optimize designs for high volume manufacturing processes. * Work closely with optical, electrical, and product teams to ensure design compatibility and product performance. * Interface with vendors and contract manufacturers to review DFM, tolerances, materials, and production processes. Required Qualifications * B.S. or M.S. in Mechanical Engineering or related field. * 3+ years of experience in mechanical product design, preferably in opto-mechanical or sensor systems. * Proficiency in 3D CAD software (SolidWorks, Creo, or equivalent). * Experience with thermal simulation tools (Solidworks Simulation, ANSYS, Icepak, or similar). * Strong understanding of tolerancing and material selection for optics and electronics enclosures. * Familiarity with optical alignment principles and vibration/shock isolation techniques. * Familiarity with system level reliability analysis and approaches to validate designs. * Excellent problem-solving, documentation, and communication skills. Preferred Qualifications * Experience with LiDAR, camera systems, medical equipment or other optical sensing technologies. * Familiarity with FEA, CFD, or multi-physics simulation. * Background in automotive or aerospace environmental standards. * Hands-on lab experience with alignment, assembly, and testing of optical systems. Benefits Package: * Competitive base salary and meaningful equity package. * Comprehensive health benefits (Medical, Dental, Vision). * Unlimited PTO and paid company holidays. * Team events and company meetups. Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description Department: Quality Location: PTI Tech, Clifton NJ Reports To: Director of Quality Mission To uphold and advance the highest standards of quality across all stages of manufacturing—ensuring compliance with AS9100 and customer-specific requirements through robust documentation, risk management, and process validation. This role exists to proactively prevent quality issues, support internal and customer-facing investigations, and strengthen PTI’s reputation as a trusted partner for mission-critical components. Competencies – What This Person Must Be Standards-Driven: Understands and applies AS9100, ISO 9001, MIL-STD-1916 and customer-specific standards; ensures audits, validations, and ongoing operations meet all requirements. Root Cause Problem Solver: Leads investigations using 8D, 5 Whys, and Ishikawa methods to ensure sustainable corrective actions. Process Control Advocate: Uses SPC, PFMEA, control plans, and capability studies to ensure consistent, capable production. Metrics-Driven: Uses data analysis to monitor trends, reduce scrap, and eliminate recurrence of quality issues. Customer-Focused: Communicates clearly with aerospace, defense, and other high-stakes clients; drives issues to closure and delivers timely updates. Cross-Functional Collaborator: Partners with Engineering, Manufacturing, and Production teams to align on requirements, validate processes, and resolve issues quickly. Detail-Oriented: Manages documentation and compliance requirements with accuracy including FAIRs, PPAPs, CAPA records, SOPs, and quality alerts with full traceability. Self-Directed and Proactive: Takes initiative to identify and resolve quality risks without being prompted and with minimal supervision; follows through on actions with rigor and accountability. Key Responsibilities • Drive quality improvements through Gage R&R studies, Statistical Process Control (SPC), Six Sigma, and Lean Manufacturing tools., • Lead investigations into internal and external quality issues; document findings and ensure timely resolution., • Perform root cause analysis using structured problem-solving methods (8D, 5 Whys) and verify the effectiveness of corrective and preventive actions (CAPA)., • Coordinate timely responses to Supplier Corrective Action Requests (SCAR), Non-Conformance Reports (NCR), customer complaints, and quality-related queries., • Prepare and maintain First Article Inspection Reports (AS9102), Production Part Approval Process (PPAP-AS9145) documentation, and validation (IQ/OQ/PQ)., • Lead risk assessments (PFMEA) and develop control plans to mitigate quality risks., • Track and analyze defects and scrap data to identify trends and prioritize corrective actions., • Collaborate with manufacturing and engineering to improve processes and define inspection criteria., • Own inspection processes, including CMM (Zeiss – Calypso), OGP, and Keyence programming, as well as inspection fixture design (SolidWorks preferred)., • Oversee QC personnel training in partnership with manufacturing engineering to establish visual standards and develop work instructions., • Maintain SOPs, work instructions, inspection procedures, and training logs in compliance with AS9100., • ≥ 98% Quality Shipments, • ≥ 90% Gage R&R Pass Rate, • ≥ 1.33 Cpk for Stable Processes, • ≤ 3% Internal Scrap Rate on assigned processes, • ≥ 95% CAPA Effectiveness, • ≥ 95% On-Time Submission of FAIRs, PPAPs, SCAR’s, and CAPA’s, • Bachelor’s degree in Mechanical, Manufacturing, or a related Engineering field, • 3–5+ years of quality engineering experience in injection molding or precision manufacturing, • Working knowledge of AS9100, ISO 9001, and MIL-STD-1916, • Experience with FAIR, PPAP, SPC, PFMEA, control plans, and CAD (SolidWorks preferred), • Proficiency in statistical tools (Minitab, JMP, Excel) and QMS/ERP systems, • ASQ Certified Quality Engineer (CQE) or Six Sigma certification, • Experience in the defense, aerospace, or medical device industries, • Hands-on inspection experience, including CMM, optical, or non-contact methods, • Ability to stand and walk on the production floor for extended periods, • Capable of lifting up to 40 lbs and accessing production and inspection equipment, • Manual dexterity for handling tools, parts, and inspection equipment, • Visual acuity sufficient to read prints, inspect parts, and identify quality defects, • Manufacturing facility with exposure to injection molding machines, CNC equipment, and secondary operations, • Requires use of PPE, including safety glasses, gloves, and hearing protection, • Frequent collaboration with production, maintenance, and engineering teams on the floorCompany DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job Description Sr. Python Engineer As an Engineer, you will work closely with your team to guide projects to success. You'll have a hands-on role designing, developing, debugging, and deploying software and AI infrastructure solutions where you can leverage your expertise with complex AI platforms. To thrive in this career, you'll need to be an expert in Python and/or Java and Cloud Infrastructure Services and have a proven, strong foundation designing applications and writing good code. Given the scale of our datasets, AI agents’ services and the complex app development requirements we give you to solve, you’ll stay challenged and engaged with years of exciting projects ahead! WHAT YOU'LL DO: Here's what you can expect on a typical day: · Build Scalable and Robust Apps. You will identify, develop, and implement advanced codes /design patterns using efficient, scalable and parallel programming standards for the AI applications and Infrastructure among others. · You will identify opportunities for optimizing existing infrastructure and system performance. · Teamwork and collaboration. You will be part of a thriving team, closely working with Agent Developers, Prompt Engineers and Managers to identify needs for building infrastructure, new codes, APIs/services for distributed systems, and serverless applications. Experience: You have 5+ years of experience in relevant skills gained and developed in the same or similar role. TO SUCCEED IN THIS ROLE: · You have a bachelor’s degree OR equivalent in Computer Science. · Highly skilled in Python and other programming such as Java, Kotlin, Golang for code optimization/profiling and app development. · Strong experience with a cloud platform (Azure, GCP or especially AWS) · Experience in building Distributed and Parallel Computing Applications · Experience with Testing Frameworks and Integration (Unit, Integration, Component), TDD, BDD. · Familiar with docker containers and container services like AWS ECS, AWS EKS, Kubernetes · Experience building serverless applications with AWS Lambda, Google or Azure functions · Experience designing applications with high Performance and Scalability requirements · Knowledge and experience writing clear and efficient code (Clean Code, Design Patterns etc.) · Strong experience with Git and some code repository (GitHub, Gitlab, Bitbucket) It would be nice if you also have: · Knowledge and/or experience in AI and Machine Learning framework. · Knowledge of RDBMS, Vector Databases, and SQL/NoSQL. Company DescriptionStaffing Technologies has 20+ Years of IT Staffing and Consulting Experience. Headquartered in Overland, KS, we have 9 Offices Nationwide and have 3 Global Delivery locations. Saicon, our Parent Company, specializes in and has rich experience filling various type of job roles (Both IT & Non IT) in Retail, Consumer Products and Brands, Insurance, Logistics and Travel, Banking and Financials, Manufacturing, Healthcare, and Life Sciences, Telecom, Media & Entertainment, Professional Services, Government and Public Sector.Staffing Technologies has 20+ Years of IT Staffing and Consulting Experience. Headquartered in Overland, KS, we have 9 Offices Nationwide and have 3 Global Delivery locations. Saicon, our Parent Company, specializes in and has rich experience filling various type of job roles (Both IT & Non IT) in Retail, Consumer Products and Brands, Insurance, Logistics and Travel, Banking and Financials, Manufacturing, Healthcare, and Life Sciences, Telecom, Media & Entertainment, Professional Services, Government and Public Sector.

Job Description Job Title: Project Engineer Company: PTI Tech Location: Clifton, NJ (On-site) Industry: Manufacturing / Metal & Plastic Injection Molding Experience Level: Mid to Senior Level About PTI Tech PTI Tech is a leading provider of advanced manufacturing solutions, specializing in precision metal and plastic injection molding for the aerospace, medical device, industrial, and defense industries. We are growing our technical team and seeking a skilled and motivated Project Engineer to support innovative product and process development efforts. Position Summary PTI Tech has an immediate opening for a Project Engineer to support the design and development of new products, components, and advanced manufacturing processes. This position plays a key role in PTI’s R&D and production programs, working closely with the Engineering Manager and cross-functional teams. Responsibilities include initial concept design, 3D modeling, analysis, prototyping, process development, vendor coordination, and supporting the implementation of novel engineering solutions. The ideal candidate is passionate about mechanical design, manufacturing innovation, and automation. We’re looking for a hands-on engineer with strong problem-solving skills, project leadership experience, and the ability to work effectively in a fast-paced, team-oriented environment. Key Responsibilities Design & Development • Develop production processes, tooling, fixtures, and manufacturing cells with a focus on quality and repeatability., • Perform technical and requirements analysis, researching new materials, technologies, and processes., • Apply DFM to assess part moldability and recommend design improvements for injection molding (plastic, metal, ceramic)., • Lead engineering projects from concept through production, coordinating cross-functional teams and external partners., • Create and manage project timelines, task assignments, and deliverables., • Write detailed work instructions, set up manufacturing equipment, and establish standard operating procedures (SOPs)., • Design and implement automation processes to increase manufacturing efficiency and consistency., • Program and troubleshoot Universal Robots and Arburg robotic systems., • Design and develop custom end-of-arm tooling for robotic automation., • Integrate automation systems into production workflows and support new product introductions (NPIs)., • Support ongoing production by resolving technical issues and improving part quality., • BS or MS in Mechanical Engineering, Materials Science, or related field., • Proficiency in CAD design using SolidWorks., • 5+ years of experience in mechanical design and development of injection-molded or over-molded parts and assemblies., • Strong knowledge of DFM, injection molding (plastic/metal), tool and mold design, and automation integration., • Experience with machine shop processes: turning, milling, EDM, and CNC machining., • Fluent in interpreting engineering drawings and applying GD&T., • Strong project management and organizational skills., • Experience in aerospace, medical device, defense, or industrial sectors., • Familiarity with additive manufacturing., • Experience with process validation, lean manufacturing, and quality systems., • Program management experience is a plus. Company DescriptionEngineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it. PTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.Engineers. Injection molders. Makers. Problem solvers. We are PTI Tech. We are a dedicated team of the nation’s leading experts devoted to manufacturing excellence. We have perfected our craft over our rich 37-year history, and we continue to push the boundaries of what’s possible. If you can imagine it, we can build it.\r\n\r\nPTI Tech supports some of the world’s most innovative “technology-first” companies and institutions across mission-critical applications, from surgical instruments to fighter aircraft components. PTI Tech’s family-run, personalized small-business approach to quality, innovation, and service continues to earn awards and recognition from government and industry.

Job DescriptionThis is a temporary 6-month contracted 1099 position with no benefits. Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR LykMhM2Xog

Job DescriptionDescription This person will be responsible for overseeing the procurement of over 150 custom spun metal components we’ve designed over the years. We work closely with our trusted metal spinning and wood turning partners, and have sourced a network of US-based high-quality suppliers who are keeping their time-honored craft alive here in America! The Procurement Engineer will work closely with the Systems and Design Engineers to ensure part requirements are clearly and successfully communicated to our partners. Data for recommended order quantities and historical usage is all available on the company’s meticulously configured DDMRP (Demand Driven Materials Requirements Planning) system – Intiflow and Netsuite ERP. On top of analyzing data, sending emails and phone calls to partners, quoting parts, and submitting purchase orders – yxou will be a central point of contact for our design, engineering, scheduling, production, and receiving departments for all things related to the parts under your control. Key ResponsibilitiesYour responsibilities include: • Quote and Purchase parts – maintain all required inventory at “preferred stock levels”, • Maintain and improve vendor relationships, • Pursue new vendors, • Collaborate with Design and Engineering to understand part requirements, • Collaborate with Receiving department to assist with the quality control inspection process, • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Strong technical skills to navigate our software-based workflows

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Mechanical Engineer to join our growing team. In this role, you will play a pivotal role in developing and innovating our low-voltage switchboard products. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days., • Develop comprehensive mechanical designs for switchboard enclosures, busbars, and structural components, utilizing advanced CAD software to create detailed 2D and 3D models., • Select appropriate materials and manufacturing processes for all components, considering cost-effectiveness, performance requirements, and industry best practices., • Employ simulation and analysis tools to optimize designs for superior performance, reliability, and thermal management., • Lead the mechanical design process to strictly comply with relevant industry standards and regulations (ANSI, IEEE, IEC, local codes)., • Ensure that switchboard design complies with relevant design practices, electrical codes, and safety standards such as UL891, UL67, UL508A, UL50, the National Electric Code (NEC), the New York City Electric Code (NYCEC), ANSI, IEEE, IEC, the Utility Standard, and local regulations., • National Electrical Code (NEC 2008-2020), NYNEC, UL 891, UL67, UL 50, UL 508a in product development, • Stay abreast of emerging standards, innovative materials, and cutting-edge design methodologies., • Collaborate closely with electrical engineers, design teams, and project managers to achieve project objectives seamlessly., • Verify switchboard designs meet stringent mechanical performance and safety standards (e.g., UL, NEC)., • Investigate and resolve any mechanical quality issues or non-conformities identified during production or in the field., • Generate comprehensive engineering documentation, including detailed mechanical specifications, bills of materials (BOMs), and user-friendly technical manuals., • Maintain accurate records of all design changes, revisions, and updates., • Actively monitor project budgets and identify cost-saving opportunities through design optimization without compromising quality or safety., • Provide technical support for maintenance and repair activities on deployed switchboard products., • Assist in troubleshooting and resolving mechanical issues that may arise in the field. Requirements: Skills, Requirements, and Specifications • Bachelor's degree in Mechanical Engineering (Master's degree a plus)., • Experience in sheet metal and fabrication design., • Proven experience in switchboard design., • Familiarity with major brands in the industry (Schneider, ABB, Eaton), • Proficiency in advanced CAD software or mechanical design AutoCAD, Autodesk Inventor., • In-depth understanding of mechanical standards., • Excellent communication, collaboration, and teamwork skills., • Ability to thrive in a fast-paced, results-oriented environment.

Job Description About the Role: We’re looking for an Entry-Level Electrical Designer / Electrical Engineer to join our team. This role is ideal for someone early in their career who wants to gain hands-on experience designing electrical systems for building projects in commercial, healthcare, education, and government sectors. Responsibilities: * Assist with design of building electrical systems (power, lighting, fire alarm, low-voltage). * Conduct field surveys, site visits, and collect project data. * Prepare design drawings and construction documents using AutoCAD and Revit. * Research codes (NEC, IBC) and apply to designs. * Support engineers with calculations, specifications, and reports. * Coordinate with architects, engineers, and BIM designers. * Review shop drawings, track RFIs, and assist with commissioning/punch lists. Qualifications: * Bachelor’s degree in Electrical Engineering (ABET-accredited). * 1–4 years of electrical design or electrical engineering experience. * Proficiency in AutoCAD and Revit. * Knowledge of NEC and other relevant codes. * EIT certification a plus (PE track encouraged). * Strong organizational and communication skills. * Willingness to travel for site visits (reliable transportation required). Company DescriptionFutures Consulting is a leading nationwide professional recruiting firm specializing in the placement of highly skilled candidates in Architecture & Engineering and Industrial Manufacturing & Distribution. We are hired by some of the finest consulting firms throughout the US to ensure that only the strongest professionals join their workforce.Futures Consulting is a leading nationwide professional recruiting firm specializing in the placement of highly skilled candidates in Architecture & Engineering and Industrial Manufacturing & Distribution. We are hired by some of the finest consulting firms throughout the US to ensure that only the strongest professionals join their workforce.

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . Description: The Medical Device Engineer is responsible for leading the design and development activities of new products and improving existing products in compliance with all quality and regulatory requirements. S/he will be responsible for authoring technical documents for the development of medical devices and combination products according to relevant Design Control regulations and standards. The person in this position will also be responsible for providing project-specific support, including technical analysis and review of supplier documentation as required. The position has a scientific focus that includes formulation development, product performance characterization, and implementation including proto-type design and fabrication and data generation through designed experiments. The Medical Device Engineer is expected to aspire for excellence with a bias toward action, willing to roll up their sleeves, get hands-on, and do what’s necessary to move projects forward in a fast-paced environment. They are committed to designing and developing products that dominate the marketplace and improve healthcare by partnering with our customers to drive purposeful innovation, resulting in best-in-class products. The Medical Device Engineer will work with a multidisciplinary team of researchers. This is a multi-faceted job in a highly collaborative environment across multiple functions that will require flexibility as well as an ability to learn about and develop new technologies and explore new techniques in pursuit of product innovation and robustness. Role level is contingent on experience, but this is not an entry level role.. This is a full-time, on-site position, located in Brooklyn, New York. Responsibilities • Create and lead experimentation for exploratory and/or product development research focusing on polymeric materials devices and their use., • Define new product functional requirements (design inputs/user needs) and evaluate the design's overall effectiveness, cost, reliability, and safety., • Lead cross-functional teams to develop new products, address design issues, and maintain existing designs., • Apply strong problem-solving skills to find solutions to complex problems., • Work independently to plan and schedule own activities necessary to meet project timelines., • Work cooperatively with, quality, manufacturing, regulatory, clinical, and marketing to ensure project success., • Lead the creation of design history file documentation through the new product development process., • Develop new implant and instrument designs utilizing Solidworks and modeling/detail design specifications., • Generate technical protocols/reports to support device safety and efficacy., • Invent/create concepts and designs and submit invention disclosures., • Ensure that all design activities adhere to FDA Quality System Regulations and ISO 13485 design control and risk management requirements. Lead material/design/process changes through a design control process, with well-documented research/analyses., • Author protocols and reports including development studies and design verification/validation activities., • Develop and execute test methods to aid in exploratory research, product development, and quality control; conduct chemical and mechanical property evaluation tests to assess the desirability of process or formulation changes., • Exercise technical judgment in the design, execution, and interpretation of experiments within the scope of project responsibilities and ensure the use of professional concepts to solve complex problems in creative and effective ways, in conformance with scientific methods and procedures., • Prepare samples as required for testing, or other evaluations and data analysis, including in voice-of-customer (VOC) labs., • Interface with customers, suppliers, and internal cross-functional team members to develop specifications and coordinate prototype fabrication., • Maintain a laboratory notebook and other technical documentation to required GLP/GMP guidelines., • Maintain active dialogue with Regulatory Affairs as subject matter expert on all product design elements/documentation pertaining to research towards FDA/regulated authority submissions,, • Provide support to marketing and sales team, support the introduction of new technologies with the development of presentations, sales tools, formulations, and applications data, • Communicate results to the scientific community via published papers. Present research at academic/industry symposia as an external representative of the company., • Manage part-time staff as a research leader and mentor for ongoing research projects., • Work with company leadership to evaluate existing research practices and contribute to a culture of ethical, high-quality research operations within the organization., • Provide other project or product support as needed in order to support Cresilon’s business objective. Required Qualifications • BS in Chemical Engineering, Polymer Engineering, Material Science, Biomedical Engineering, Mechanical Engineering, or related scientific discipline., • A minimum of 4+ years of product development experience is required., • A minimum of 2 years of hands-on experience in new product research and development in a cGMP-regulated industry is required (work experience in the Medical Device field is strongly preferred), • Adept experimentalist with hands-on experience in product development of medical devices and their safety/efficacy characterization in an R&D environment., • Experience gathering user needs, translating them to technical inputs, and developing viable V&V (Design Verification and Validation) plans., • Experience leading complex product development initiatives from concept through release., • Good working knowledge of anatomy and surgical procedures is required., • Demonstrated ability to solve difficult technical problems and deliver practical solutions that meet the application requirements is required. This includes strong analytical, problem-solving, and decision-making skills with the ability to be observant and to think creatively., • Demonstrated ability to design experiments and analyze data with appropriate quality and statistical methodologies., • Demonstrated ability to work independently as well as effectively be a strong team contributor and work cross-functionally to expedite the completion of critical project tasks, • Ability to handle multiple project assignments of medium scope and complexity and able to prioritize and complete work with a sense of urgency in a timely manner., • Ability to lead directly and by influence, including strong problem-solving, conflict resolution, and analytical skills., • Requires strong leadership skills, excellent written and verbal communication and presentation skills., • Working knowledge of FDA requirements as per 21 CFR 820, • Proficiency in the use of Microsoft Excel, Microsoft Word, and Microsoft PowerPoint is required., • Legal authorization to work in the United States is required. Preferred Qualifications • An advanced degree (MS or Ph.D.) is highly preferred., • Hands-on experience in product development with Class II and Class III medical devices., • Experience developing test methods and protocols/reports for safety and efficacy testing of implant and instrument designs., • Working knowledge of ISO 9001, ISO 13485:2003, and ISO 14971:2007., • Experience with IDE and PMA submissions., • Working knowledge of Good Documentation Practices (GDP), and Good Manufacturing Practices (cGMP), • Good understanding of statistical tools and validation/verification techniques., • Six-Sigma green belt or black belt certification Cresilon is an equal-opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time. Benefits • Competitive annual base salary range of $80,000 - $160,000, depending upon job level and qualifications, • Paid Vacation, Sick, & Holidays, • Monthly MetroCard Reimbursement, • 401(k) & Roth Retirement Savings Plan with company match up to 5%, • Work/Life Employee Assistance Program, • Company Paid Life and Short-Term Disability Coverage, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage

Job DescriptionSalary: $75k - $90k MAC Products, one of the premier mass transit and utilities manufacturers in the North Jersey area, is looking for a proactive Quality Engineer to join our team. You will be a key player in maintaining and improving the high standards of our manufacturing processes. We need a self-motivated, hands-on professional unafraid to tackle problems and solve challenges. Responsibilities Lead root cause analysis and implement practical corrective and preventive actions. Monitor and improve critical manufacturing processes, including brazing and welding. Conduct internal audits and lead process improvement projects. Provide technical support & training to QC inspectors and collaborate with engineering and manufacturing teams. Collect and analyze quality data to drive proactive improvements. Some travel to customer or supplier sites may be required. Qualifications & Skills Required: Bachelor's or Master's degree in a technical discipline. 3-5 years of experience as a Quality Engineer in a manufacturing environment. Strong working knowledge of ISO 9001:2015. Proven ability to perform dimensional inspections and mechanical testing of parts. Proficiency with Microsoft Office Suite. Preferred: Ability to interpret electrical wiring diagrams or schematics. Familiarity with welding, brazing, or automation in manufacturing. Knowledge of statistical principles and statistical process control (SPC). This is a fast-paced and collaborative culture, so we are looking for candidates who have a background multi-tasking in a team-oriented environment. There is a ton of room for growth as the company looks to expand in the next several years. MAC Products has been in business for almost 60 years and the average employee tenure is well over 10 years, so we are looking for an individual who wants to be here long-term and grow with the company. The role is onsite Monday - Friday at our facility in Kearny, NJ, so candidates must be local / commutable.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika has subsidiaries in 102 countries around the world and, in over 400 factories, produces innovative technologies for customers worldwide. In doing so, it plays a crucial role in the transformation of the construction and transportation sector toward greater environmental compatibility. With more than 34,000 employees, the company generated sales of CHF 11.76 billion in 2024. Job Description • Visit cement plants, building strong relationship with the cement market., • Regular communication with Company’s Director of Cement Additives and Company’s Technical Service., • Follow closely on-site field trials., • Jointly work with commercial/technical team to understand the customer requirement, and making adjustment of products to support existing business and capture new market opportunities to grow the business., • Jointly work with commercial team to gather market intelligence to better understand industry trend and competitors. Working with Product Management to develop new product to grow and improve profitability of the business., • Develop and regularly update competitors’ product database to support commercial growth., • Develop, implement, and manage customer complaint process to make sure all complaints are well taken care, timely response to customers, and high degree of customer satisfaction is achieved., • Provide value added service to customer – seminar, technical presentation, on site troubleshooting., • Serve as the technical expert to SIKA’s customers by troubleshooting technical issues at the Cement Plant, demonstrating Sika’s product capabilities, recommending solutions and serving as Sika’s representative in technical proposals to the customers. Provide first level of field troubleshooting to customers., • Promote safety working environment and commit to achieve zero accident target., • Report to Direct Manager on activity, market, competition, key projects, trials.Qualifications, • Diploma / University degree in engineering (preferably chemical engineer), • 3-5 years hands-on field experience in Cement Industry, • Strong relevant industry and segment knowledge & network, • Strong technical aptitude and willingness to learn and apply knowledge, • A self-starter, excellent time and self-management, require minimum supervision, • Ability to work independently and willing to travel on a frequent basis, • Excellent customer relationship management skill, • Ability to influence and lead multi function to achieve goals, • Good communication and team player Additional Information · 401k with Generous Company Match · Bonuses · Medical, Dental, and Vision Benefits · Paid Parental Leave · Life Insurance · Disability Insurance · Paid time off, paid holidays · Floating holidays + Paid Volunteer Time · Wellness/Fitness Reimbursements · Education Assistance · Professional Development Opportunities · Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics.

Job Description The Vibration Test Technician will assist in setting up, conducting, and documenting vibration testing for Valcor Space products. Collaborating with Engineers, they’ll assist in designing fixturing, integrating new products, perform vibration testing, and report results to verify product quality in a fast-paced production lab environment. Duties/Responsibilities: • Operate Electrodynamic Vibration systems as well as pneumatic systems to test the manufacture quality and overall dynamic response of valves, valve systems, and components., • Use basic hand tools to set up and run vibration and pneumatic testing of Valcor Space hardware., • Read and interpret technical documentation, such as procedures, drawing, and process travelers, appropriately., • Ensure test software is properly programmed to meet test requirements., • Work with Valcor Dynamics Test Engineer to understand dynamic concepts and product behavior., • Use critical thinking and understanding of troubleshooting steps to adjust and perform tests accordingly., • Create detailed documentation of all testing performed., • Employ Lean Manufacturing principles and initiatives if/when necessary, • Maintain a well organized and functional vibration lab, • Troubleshoot, repair, and/or report any equipment in need of repair to supervisor or applicable engineering group., • Ensure compliance with all safety, quality, maintenance, and company policies and procedures, • Working knowledge of vibration testing and applicable industry standards, • Actively participate in relevant team meetings, improvement programs, and initiatives to contribute to the achievement of company objectives., • Communicate effectively with internal and external stakeholders at all levels, • Maintain a clean, secure, and well-maintained work area., • Complete special projects, miscellaneous assignments, and related duties as needed., • High school diploma or equivalent, • Mechanical aptitude and the ability to understand and work with technical documentation., • Ability to work in a fast-paced environment and follow procedures while maintaining a detail-oriented workflow., • Ability to drive and execute against a delineated test schedule, • Effective verbal/written communication skills required for interacting with all levels of personnel within the organization., • Must not have vision impairment beyond usage of corrective lenses., • Often required to stand, squat, sit, bend, turn, balance, and move freely within the facility and around equipment to handle parts and set up tests. Salary Range:$24.00 To $40.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.