Manufacturing technician jobs in Hoboken, New JerseyCreate job alerts

Job Description MIH Systems Group is a growing company in the evolving field of building commissioning, and we strive to make buildings work better. Specializing in the optimization of complex building systems, our team's diversified skill set provides value to our clients from the design stages of new construction all the way through operating existing buildings. Our consulting group provides a full array of commissioning services for both new and existing buildings, and our technical services group provides start-up services on complex HVAC equipment from a wide range of manufacturers. The MIH team consists of experienced industry-leading professionals, focused on logistical, energy and cost-effective solutions to our clients. The HVAC Service Technician specializes in the start-up and service of equipment for a variety of applications of air-conditioning, heating, ventilation, humidity control and energy management. We are searching for both experienced and entry-level HVAC technicians to help support the growing service business. The candidate must be able to troubleshoot and repair HVAC systems, be dependable and have good customer service skills. This role would service our NYC Metro area. Requirements: * 5+ years of solo field experience with commercial heating and air conditioning. (Journeyman) * Must have knowledge of commercial air-conditioning, heating, water source heat pumps & rooftop packaged HVAC systems. * Advanced knowledge of refrigeration. * Controls background a plus. * Manufacturing representative a plus. * EPA certification * MUST have a clean driving record. Estimated Salary: $60/hr - $70/hr, with flexibility based on experience and skills. MIH Systems Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. You should be proficient in: • Refrigeration Systems, • HVAC Service & Installation

Company Description TraxNYC, located in New York City, specializes in crafting luxury jewelry that combines bold designs with exceptional quality. Renowned for its commitment to superior craftsmanship, personalized service, and timeless creations, the company is dedicated to delivering stunning jewelry pieces that exceed expectations. With a passion for excellent customer experiences, TraxNYC ensures a seamless process whether customers are purchasing custom jewelry or requesting expert repairs. Role Description This is a full-time, on-site role based in New York, NY, for a 3D Print & Wax Technician Assistant specializing in jewelry production. The responsibilities include assisting in the preparation and operation of 3D printing and wax production equipment, maintaining production schedules, and ensuring the accuracy and quality of printed designs. The assistant will also assist with routine maintenance of machinery and contribute to a collaborative production environment. 3D Printing & Wax Handling • Assist with operating wax 3D printers (setup, start jobs, monitor prints), • Remove, clean, and post-process wax prints carefully, • Inspect wax models for defects (cracks, layer issues, incomplete prints), • Label, organize, and track wax models for casting Production Support • Prepare waxes for casting (spruing support, storage, handling), • Maintain cleanliness and organization of print and wax stations, • Assist with printer maintenance (resin/wax refills, cleaning, basic troubleshooting), • Track daily print jobs and report issues to senior technicians Quality Control • Ensure wax models meet quality standards before casting, • Follow proper handling techniques to avoid breakage or distortion, • Communicate print or design issues promptly Documentation & Workflow • Log print jobs, failures, and reprints, • Help maintain production schedules and timelines, • Follow standard operating procedures (SOPs) and safety guidelines Qualifications • High attention to detail, • Comfortable working with small, delicate components, • Willingness to learn jewelry production processes, • Reliable, organized, and punctual Preferred(Nice to have) • Experience with 3D printers (wax or resin), • Jewelry manufacturing or casting experience, • Familiarity with CAD files or design workflows, • Experience working in production, manufacturing, or lab environments Job Type: Full-time Pay: $18.00 - $25.00 per hour Expected hours: 40 – 50 per week Benefits: • Employee discount

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance, and we make factories run better. Principal Duties/Responsibilities: To Live and Lead Safety · Takes responsibility for employee safety and wellness by deploying the ATS safety program and ensuring effective completion of safety training, observations, and incident investigations. · Implements and actively supports all Beyond Zero initiatives · Enables the growth of a customer safety culture by a fostering a safety partnership and sharing best practices To Inspire and Provide Clarity on Vision and Strategy · Motivates employees by communicating a clear vision that enables all employees to understand the rationale for, and the benefit of, both site-level and company-wide objectives · Acts as an effective change agent, leading the implementation of strategic initiatives through positive team communications, appropriate action planning, and successful implementation activities · Understands and appropriately articulates both ATS and customer strategies, providing the team with line of sight between team responsibilities and strategic outcomes To Own Our ATS Culture · Builds positive relationships with ATS employees, customers, and peers through open communication and role-modeling the ATS leadership core competencies of honesty and respect · Sets a positive, influential standard for others and creates a constructive climate for their team · Influences with transparency and use participative methods to ensure that decisions are understood and accepted · Establishes a positive work environment through managing and personalizing onboarding; engaging in ongoing one-on-one communications; and recognizing individual contributions and achievements on a timely basis · Adheres to policies and procedures and ensures that staff understands the rationale behind policies and processes To Support Our Employees’ Learning and Growth · Leads and builds team capabilities by working with individuals on performance improvement, career planning, training, and skills development. · Develops, communicates, and executes a Skills Matrix and Technician Training Plan · Builds and maintains a succession plan for key positions (i.e., Supervisors, Supply Chain, P/S, RE) To Ensure and Drive our Business Results · Leads and ensures the Operating System is understood, reinforced, and embedded · Develops and executes a site-specific maintenance plan per ATS standards · Manages financial performance of the site (revenue, expenses, and profit) to achieve set objectives · Develops and maintains effective relationships with all ATS business units, fully utilizing their services and ensuring cross-functional alignment · Collaborates with and builds customer relationships to ensure priority alignment and proactively anticipates customer needs as the primary on site contact · Ensures alignment of customer expectations and ATS site goals through management of site-specific contracts · Communicates with the customer through daily, weekly, and monthly meetings and conducts a regular review of the performance metrics with the customer · Drives a continuous improvement methodology and promotes cost savings · Analyzes and reports on key performance indicators, completing root cause analyses and developing and executing action items while removing barriers and addressing issues · Collaborates with sales and operations leadership to increase the scope of services Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor’s degree in technical, business, or a related field preferred or seven years of operations / maintenance experience · Three years of supervisory experience with a strong focus on development of employees · Resilient and flexible, able to multitask and prioritize with an innate ability to understand and accept change and motivate others around change · Highly tuned emotional intelligence with demonstrated ability to build relationships and lead teams with honesty and integrity to achieve goals · Solid understanding of manufacturing / assembly work environment · Business acumen · Positive influencer with appropriate levels of organization. · Strong customer focus with the ability to build positive business relationships and show a sense of urgency Desirable KSAs · Manufacturing maintenance experience preferred with related certifications and training · Good understanding of, and/or experience with, proactive/reliability maintenance processes, i.e., Planning/Scheduling, P/M, PdM, and root cause analysis, and continuous improvement methodologies · Good computer skills, including Microsoft applications and web-based applications such as Power BI, GEAC, Concur, Workday and related software · Time management skills · Ability to relocate to specified locations · Excellent communications skills (verbal, written, and presentation) · Agile, curious learner and authentic, credible teacher · Financial acumen and knowledge of forecasting and managing budgets Leadership Core Competencies: Business and Company Acumen Lead with honesty and integrity Build bold and relevant strategies Welcome and motivate change Recognize the right outcomes and how they were achieved Role model safety and wellness Emotional Intelligence Provide psychological safety Be self-aware Build relationships Ask for and act on feedback Respect diverse background and viewpoints Lead in the Present; Eye to the Future Commit to accountability Coach people to their potential Own talent development and placement Turn problems into opportunities Be resilient and flexible Communicate, Communicate, Communicate Practice transparency Build relationships through respect Be a curious learner and credible teacher Influence in a proactive, positive way Ensure cross functional awareness/decisions ATS is committed to providing equal employment opportunity in all aspects of employment to all applicants and employees, regardless of age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information or other legally protected status.

JOB TITLE: Fit Technician for Children's Apparel · Spec and fit approvals for pre-production, final production samples from out-sourcing makers. · Work with designers, production coordinator for fitting and construction comments. · Write comments about garment construction, pattern sewing and decoration placements. · Measure fit/pp samples · Create final graded size spec. Follow each customer’s requirement. · Assist designer for new design style & initial specs. · Coordinate same size spec for each type of knit and woven body. QUALIFICATIONS • Formal education in Pattern Making and Apparel Production., • Knowledge of Fabric and Garment Construction., • Minimum of 7 years experience in Children apparel companies that focus mainly on girls’ size apparel., • PC proficiency with Word and Excel., • Must have strong sense of fashion and trends, • Must be organized and a strong team player About Mamiye Brothers Mamiye Brothers is a premier New York-based apparel company with over 70 years of industry expertise, specializing in the design, manufacturing, distribution, and marketing of some of the most recognized brands in women's, children's, and infant clothing. Built on a foundation of excellence, integrity, quality, and innovation, Mamiye Brothers is home to a diverse portfolio of brands including C&C California, Hurley, Habitual, Kensie Jeans, Wallflower, Off-White, Scotch & Soda, Little Me, Kissy Kissy, and more. Headquartered in Midtown Manhattan, we are committed to delivering best-in-class product and service across every segment we serve. To learn more, please visit us at: ___ About The Brand: Kissy Kissy is an award-winning luxury baby and infant apparel brand known for its use of premium Peruvian Pima cotton — crafting clothes that are irresistibly soft, beautifully detailed, and built to last. With timeless designs featuring hand embroidery, smocking, and delicate prints, Kissy Kissy has been a go-to for parents and gift-givers since 1996. The brand is part of the Mamiye Brothers portfolio — a New York-based apparel company with over 70 years of expertise in bringing the world's most desirable brands to market. To learn more, please visit: ___ About The Brand: Founded in 1970, Little Me is North America's premier newborn and infant clothing brand, celebrated for its commitment to quality, safety, comfort, and value. Designed to let babies be babies, the brand offers a full range of layette, playwear, and sleepwear that blends classic style with child-friendly practicality. Little Me is part of the Mamiye Brothers portfolio — a New York-based apparel company with over 70 years of expertise in bringing the world's most desirable brands to market. To learn more, please visit: ___

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level B performs independent diagnostics, repairs, and preventive maintenance on MRF processing equipment while mentoring Level C technicians and supporting safe, reliable operations. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues., • Perform PM inspections and corrective maintenance to standard., • Document work accurately in the CMMS., • Support outages, vendor work, and equipment installations., • Follow all safety, LOTO, and PPE requirements., • Mentor Level C technicians and reinforce safe work practices. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years of hands-on maintenance experience., • Proficiency with mechanical systems and PM execution., • Ability to read service manuals and schematics. Preferred: • Experience in industrial maintenance, manufacturing, processing, recycling, municipal utilities, or material-handling systems., • Welding and fabrication skills. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level A is the senior technical expert responsible for advanced diagnostics, complex repairs, and technical leadership across all MRF processing equipment. This role sets the standard for safety, workmanship, and reliability while mentoring lower-level technicians. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Advanced Diagnostics & Repair • Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues., • Perform major component rebuilds, overhauls, and precision alignment on critical processing equipment, • Serve as the technical lead on shift and mentor Level B and C mechanics., • Verify quality of repairs, PM execution, and documentation., • Execute and refine PM tasks; recommend changes to intervals and procedures., • Help plan daily plant maintenance workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating repair options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the plant. Requirements and Qualifications::, • High school diploma or GED required., • 5+ years of industrial, fleet, or processing maintenance experience with demonstrated mastery of mechanical systems., • Strong welding and fabrication capability., • Proven ability to work independently and lead complex repairs. Preferred: • Experience as a senior technician or millwright in recycling, industrial maintenance, manufacturing, processing, aggregate, or material-handling environments., • OEM training on balers, conveyors, or processing systems. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Well rounded Maintenance Technician needed for manufacturing plant in Maryland! This Jobot Job is hosted by: Christine McNamara Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $37 - $42 per hour A bit about us: We are on the hunt for a highly skilled and experienced Maintenance Technician to join our dynamic plant. As a key member of our team, you will be responsible for ensuring the smooth operation and maintenance of our machinery and equipment. You will be expected to perform a wide range of tasks related to repair, machine maintenance, electrical troubleshooting, plumbing, HVAC, and more. Your technical expertise, problem-solving skills, and commitment to quality will play a vital role in our company's success. Why join us? • 100% coverage of health benefits, • Pension plan, • PTO & sick leave Job Details Responsibilities: 1. Performing routine inspections of machinery and equipment to detect and respond to problems, malfunctions, and performance issues., 2. Conducting regular maintenance tasks such as replacing parts, repairing machinery, and addressing any technical or mechanical issues., 3. Utilizing CMMS (Computerized Maintenance Management System) to track and manage maintenance tasks and inventory., 4. Carrying out electrical troubleshooting to diagnose and rectify electrical issues with machinery and equipment., 5. Handling plumbing and HVAC duties to ensure a comfortable, safe, and efficient work environment., 6. Adhering to all safety protocols and procedures to prevent accidents and injuries., 7. Collaborating with other team members and departments to optimize maintenance procedures and enhance productivity., 8. Staying updated on industry trends, advancements, and best practices related to machinery maintenance and repair., 9. Providing emergency repairs promptly and efficiently., 10. Participating in the implementation and maintenance of food manufacturing processes, ensuring adherence to industry standards and regulations. Qualifications: 1. A minimum of 2 years of experience in a similar role., 2. Proven experience in repair, machine maintenance, electrical troubleshooting, plumbing, HVAC, and the use of CMMS., 3. Extensive knowledge of machinery and equipment preferably in the food & beverage manufacturing space., 4. A strong understanding of the principles and applications of machinery in food manufacturing., 5. Exceptional problem-solving skills, with the ability to diagnose and resolve technical and mechanical issues efficiently., 6. Excellent communication and teamwork skills, with the ability to collaborate effectively with colleagues and other departments., 7. A strong commitment to safety, quality, and excellence in all aspects of the job., 8. The ability to work independently, manage multiple tasks simultaneously, and meet deadlines., 9. A valid driver's license and the ability to respond to emergency maintenance calls outside of regular working hours., 10. Professional certification in Maintenance, Electrical, or Mechanical Engineering is a plus. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Join our 3rd Shift team as a Maintenance Technician and enjoy competitive pay, top-notch benefits, and the chance to keep high-tech automotive manufacturing running at peak performance! This Jobot Job is hosted by: Brendan Thomas Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $27 - $35 per hour A bit about us: Are you ready to take your maintenance skills to the next level in a fast-paced automotive manufacturing environment? We’re looking for a hands-on Maintenance Technician to join our team on 3rd shift, keeping operations running smoothly and safely while driving innovation and efficiency across the plant. This is for the 3rd Shift (11:00 PM – 7:30 AM). Why join us? Key Perks: • Competitive pay + Overtime (1.5x for overtime and 2x for Sundays if needed), • Relocation assistance available, • Fortune 500-level health/medical/dental/vision, • 401(K) + match, • 3 weeks PTO + 14 paid holidays + option to purchase up to 6 weeks of additional vacation time, • Short, Long-Term and Life Insurance, • HSA+ FSA, • Employee Assistance Program + paid family leave, • Wellness programs!, • Discounts from preferred vendors, • Well-being Resources, • Professional training, • Opportunity for career advancement, working as part of an empowering workforce Job Details What You’ll Do • Keep our production floor running strong by maintaining, repairing, and troubleshooting equipment (mechanical, electrical, hydraulic, pneumatic, and more)., • Support continuous improvement by recommending changes to tooling, fixtures, and processes that improve quality and safety., • Perform inspections, adjustments, and repairs on a wide range of manufacturing and support equipment., • Champion safety by following lockout/tagout and OSHA standards 100% of the time., • Collaborate with supervisors and teammates to ensure issues are resolved quickly and effectively., • High school diploma or equivalent., • 5+ years of maintenance experience in automotive or plastics manufacturing., • Advanced troubleshooting skills across mechanical, electrical, pneumatic, and water systems., • Ability to read and interpret schematics., • Strong working knowledge of OSHA guidelines., • Computer literacy with CMMS software (Fiix or similar) and Microsoft Office., • Stand for extended periods (3–4 hours at a time)., • Regularly lift and carry up to 55 lbs., • Ability to push, pull, bend, and work in a physically active environment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Position Summary: The Inside Sales Representative will report to the NY Branch Manager and work closely with the Aftermarket Sales Manager to accomplish annual aftermarket sales goals. This position focuses on providing responsive customer service, accurate quotations, efficient order management, and warranty claim processing while maintaining strong communication with customers, the factory, vendors, and internal teams. This is a semi-hybrid role, with the expectation of being in the office 4 days per week, 1 day remote and spending approximately 15–20% of total time in the field. The ideal candidate will be organized, technically inclined, and capable of managing and reprioritizing tasks in a dynamic environment. The incumbent should be a friendly, and proactive and effective communicator who can establish clear expectations with customers, manage multiple responsibilities, and contribute to building strong, lasting relationships. They should be customer-oriented, fast learners, and willing to learn on the job. Key Responsibilities: Quoting & Opportunity Management • Prepare and issue quotes for aftermarket parts., • Enter and track all opportunities in the CRM system., • Respond to customer inquiries regarding new and existing orders., • Provide updates on order status, tracking, and delivery schedules., • Maintain close communication with the manufacturing plant and vendors to confirm lead times, address obstacles, and resolve delays., • Work in tandem with the NY Sales team to drive territory sales efforts., • Participate in customer site visits and inspections (approx. 15–20% of time)., • Assist with outside sales activities by documenting opportunities and ensuring smooth follow-up., • Process warranty claims in collaboration with the NY Sales team ensuring accurate documentation and timely resolution., • Ability to climb ladders and work at heights during site visits., • Comfortable working on rooftops and cooling towers., • Trade school minimum. Bachelor’s degree preferred, ideally in Engineering, Business, or related field., • Prior experience in sales support, customer service, or order management required., • Experience using SAP., • Knowledge of HVAC systems, cooling towers, or industrial equipment is a plus but not required., • Strong organizational skills with attention to detail and follow-through., • Proficiency in Microsoft Office (Excel, Word, Outlook); familiarity with ERP/CRM systems a plus., • Competitive base salary., • Comprehensive healthcare package including medical, dental, and vision coverage., • 401(k) plan with company match., • Quarterly bonus eligibility based on meeting aftermarket sales goals., • Hybrid schedule: in-office 4 days per week and 1 day remote work. Full attendance required for the first 3 to 6 months., • Local travel within NYC and surrounding boroughs (15–20% of time)., • Combination of office and field environments; occasional exposure to noise, heat, and weather conditions. We recognize that attracting the best talent is key to our strategy and success as a company. As a result, we aim for flexibility in structuring competitive compensation offers to ensure we are able to attract the best candidates. As required by law in this state, the estimated hourly rate range for this position is $75,000 - $90,000 and represents our good faith estimate as to what our ideal candidates are likely to expect. We tailor our offers within the range based on organizational needs, internal equity, market data, geographic zone, and the selected candidate’s experience, education, industry knowledge, location, technical and communication skills, and other factors that may prove relevant during the selection process. At SPX, it is not common for individuals to be hired at the higher end of the range, and compensation decisions depend on a variety of factors. This position is eligible to participate in a discretionary bonus, subject to the rules governing the plan. SPX offers a variety of benefits, including health benefits, 401K retirement with a company match, and flexible time off. More information about our benefits can be found on the “Rewards and Benefits” section of our career page. Company DescriptionAt SPX Corporation, what’s in it for our employees transcends market-competitive compensation and benefits. Our Total Rewards program also includes opportunities for employees’ personal development, career growth, and recognition. These programs focus on alignment and assessment of organizational, team, and individual efforts toward achieving business results. Our development and career growth programs empower our employees to enhance their skills, develop new competencies, and pursue career goals. SPX Corporation’s benefits package provides choices designed to help employees manage their well-being. Our compensation programs are performance-based to recognize and reward employees who work hard, display the values and leadership practices we embrace, and deliver exceptional results. WORKING AT SPX Our work environment is established on a work-life philosophy supported by policies, programs, and practices that help employees achieve success within and outside the workplace. We believe in creating an inclusive work environment where employees strive to realize their fullest potential. We are an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation, national origin, gender identity, genetic information, age, disability, veteran status or any other legally protected basis.At SPX Corporation, what’s in it for our employees transcends market-competitive compensation and benefits. Our Total Rewards program also includes opportunities for employees’ personal development, career growth, and recognition. These programs focus on alignment and assessment of organizational, team, and individual efforts toward achieving business results. Our development and career growth programs empower our employees to enhance their skills, develop new competencies, and pursue career goals. SPX Corporation’s benefits package provides choices designed to help employees manage their well-being. Our compensation programs are performance-based to recognize and reward employees who work hard, display the values and leadership practices we embrace, and deliver exceptional results.\r\n\r\nWORKING AT SPX\r\nOur work environment is established on a work-life philosophy supported by policies, programs, and practices that help employees achieve success within and outside the workplace. We believe in creating an inclusive work environment where employees strive to realize their fullest potential. We are an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation, national origin, gender identity, genetic information, age, disability, veteran status or any other legally protected basis.

Want to build a brighter, bolder future and cultivate your career? Join Ecolab’s team and help create a world in which we all thrive. Nalco Water, an Ecolab company, helps customers conserve more than 161 billion gallons of water annually. We serve industries from food & beverage to mining and manufacturing, delivering innovative solutions that reduce, reuse, and recycle water while protecting systems and equipment. Our team combines deep technical expertise with smart technology to drive efficiency, sustainability, and performance. Ecolab is seeking a Field Service Technician where your hands-on skills and customer-first mindset will help shape a more sustainable future. You’ll be part of a purpose-driven team that supports water treatment and disinfection systems across a variety of industries. You’ll work independently in the field, building trusted relationships with customers and delivering solutions that protect vital resources and improve operational performance. How You’ll Make an Impact: * Deliver expert service and support for cooling tower cleaning and water disinfection * Provide technical support and escalate complex challenges as needed * Build strong relationships with customers and promote best practices * Ensure full compliance with safety policies and procedures * Execute required chemistry tests, log and report data, and maintain product inventories at customer accounts * Provide routine service support to Sales Representatives in strategic district accounts to execute agreed upon customer system assurance plans * Provide technical support to customers; identifying and resolving customer pain points, escalating as required * Execute cooling tower cleaning, treatment, and large-scale water disinfection * Operate power washers, industrial vacuums, and basic hand/power tools to complete service tasks Position Details: * Location: New York City, NY * Travel Radius: NYC Metro area. 50-mile radius from Queens. * Work week and Shift requirements: 7:00am-3:00pm. Overtime optional. * Overnight Requirements: Less than 5% What’s Unique About This Role: * You’ll work in a dynamic, hands-on environment with autonomy and support * You’ll help customers meet sustainability goals while protecting their critical assets * You’ll gain access to industry-leading training and development programs Minimum Qualifications: * High school diploma or equivalent * 2 years of experience in water treatment or an industrial/mechanical environment * Position requires a current and valid Driver’s License with no restrictions * No immigration sponsorship available for this position Physical Requirements of Position: * Lifting up to 50 pounds * Exposure to hot, cold, noisy, or dirty environments * Stooping, kneeling, crouching, reaching, balancing, walking, standing, climbing Ecolab is committed to providing reasonable accommodation to qualified individuals with a disability. Preferred Qualifications: * Associate’s degree or trade school certification * Demonstrated mechanical aptitude * Experience in water treatment or specialty chemical industry * Familiarity with boilers, cooling towers, and wastewater treatment systems * Proficiency with Microsoft Office Suite What’s in it For You: * Starting on Day 1: Access to our comprehensive benefits package including medical, dental, vision, matching 401K, company-paid pension, stock purchase plan, paid parental leave, select discounted childcare resources, and more! * The opportunity to take on some of the world’s most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments. * The ability to make an impact and shape your career with a company that is passionate about growth. * The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best. About Ecolab: At Ecolab, we prioritize our talent-first philosophy by creating the most capable and diverse team to excel at our nearly three million customer sites. Building on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. Our solutions not only enhance operational efficiency but also contribute to sustainability and public health, making a positive impact on the world. We are committed to eliminating unnecessary complexities and embracing a beginner's mindset, continuously seeking new perspectives and innovative solutions to stay ahead in a rapidly changing world. Annual or Hourly Compensation Range The pay range for this position is $46,300 - $69,500. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. ___ to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing., • Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Want to build a brighter, bolder future and cultivate your career? Join Ecolab’s team and help create a world in which we all thrive. Nalco Water, an Ecolab company, helps customers conserve more than 161 billion gallons of water annually. We serve industries from food & beverage to mining and manufacturing, delivering innovative solutions that reduce, reuse, and recycle water while protecting systems and equipment. Our team combines deep technical expertise with smart technology to drive efficiency, sustainability, and performance. Ecolab is seeking a Lead Field Service Technician to join our team in New York, New York a Field Service Technician your technical expertise and customer-first mindset will help shape a more sustainable future. You’ll be part of a purpose-driven team that supports water treatment systems across diverse industries. You’ll work hands-on in the field, building trusted relationships with customers and delivering solutions that protect vital resources and improve operational performance. How You’ll Make an Impact: * Deliver expert service and support for water treatment and filtration systems * Monitor chemical usage and system performance to ensure optimal operation * Troubleshoot and resolve equipment and treatment issues with a focus on cost-effective solutions * Conduct preventive maintenance and repairs to maximize equipment uptime * Maintain accurate service documentation and communicate clearly with customers * Collaborate with internal teams to continuously improve service delivery Position Details: * Location: New York, NY * Territory: The territory for this position covers a 50 mile radius. Primarily Manhattan, maybe some of the outer boroughs. * Work Days and Shift: Mon-Fri, Regular Shift * Travel Required: Up to 10% overnight travel What’s Unique About This Role: * You’ll operate independently in a dynamic field environment, supported by a team that values your expertise * You’ll work with cutting-edge technologies and industry-leading training to stay ahead * You’ll help customers meet sustainability goals while protecting their critical assets Minimum Qualifications: * High school diploma or equivalent * Position requires a current and valid Driver’s License with no restrictions * Experience in a technical service role, ideally with water filtration systems or in industrial/mechanical environments * No immigration sponsorship available for this position * 5+ Years Water Treatment Experience, Mechanical Experience, * Basic understanding of Microsoft Office Physical Requirements of Position: * Working in confined spaces and extreme conditions (hot, cold, damp, dusty) * Lifting, kneeling, crouching, reaching, and standing for extended period Ecolab is committed to providing reasonable accommodation to qualified individuals with a disability. Other Responsibilities: Repairs, Installation, Chemical treatment/testing - standard Field Service Representative Lead Preferred Qualifications: * Associate’s degree in chemistry, mechanical systems, or related field * Hands-on plumbing experience and familiarity with industrial equipment * Experience with boilers, cooling towers, and wastewater treatment systems * Knowledge of mechanical, electrical, and pumping systems * Proficiency with Microsoft Office Suite What’s in it For You: * Starting on Day 1: Access to our comprehensive benefits package including medical, dental, vision, matching 401K, company-paid pension, stock purchase plan, paid parental leave, select discounted childcare resources, and more! * The opportunity to take on some of the world’s most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments. * The ability to make an impact and shape your career with a company that is passionate about growth. * The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best. About Ecolab: At Ecolab, we prioritize our talent-first philosophy by creating the most capable and diverse team to excel at our nearly three million customer sites. Building on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. Our solutions not only enhance operational efficiency but also contribute to sustainability and public health, making a positive impact on the world. We are committed to eliminating unnecessary complexities and embracing a beginner's mindset, continuously seeking new perspectives and innovative solutions to stay ahead in a rapidly changing world. Annual or Hourly Compensation Range The pay range for this position is $81,400-$122,100. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. ___ to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing., • Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Non Destructive Testing film X-ray L2 Technician- 2nd Shift Job Code: 34156 Job Location: Carlstadt, New Jersey Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: L3Harris is seeking an experienced Film Radiographic Testing Level 2 Inspector to process, interpret and evaluate materials, parts and weldments for compliance with required specifications and standards. Essential Functions: \n • Read and interpret information from work instruction documents, drawings and specifications, inspection procedures, material review reports and other source documents, and follow instructions the procedures and requirements needed to perform radiographic inspection of material, parts and weldments. \n, • Perform X-ray level 2 tasks in accordance to work instructions from approved general procedures & techniques. \n, • Set up and operate industrial x-ray equipment. Have the skills and knowledge to conduct system performance checks in accordance with the applicable process standard. \n, • Detect and identify indications affecting quality and safety factors such as cracks, inclusions, cavities, undercuts, incomplete fusion and porosity, etc. \n, • Determine and disposition (accept or reject) items based on NDT results. \n, • Record test results, findings and dispositions manually or with the aid of a computer or computer based system. \n, • Coordinate recurring defects with concerned with supervisor and quality engineer personnel, and if required recommend corrective action measures. \n, • Test and pass NAS 410 Level II certification in house. \n, • Able to pass vision test requirements. \n\n Qualifications: \n • High School Diploma or GED. \n, • A minimum of 800 hours experience in industrial X-ray experience inspecting aerospace components. \n, • Previously certification as an X-ray Level 2 to specification ASNT or NAS410. \n, • Have a basic knowledge of product manufacturing and inspection technology. \n, • Computer experience to include accessing on-line documents and information, working within the company business systems and Microsoft office. \n\n Preferred Additional Skills: \n • Experience in other NDT methods such as Fluorescent penetrant Inspection \n, • Experience in digital Industrial X-ray also preferred but not required. \n, • Proficiency using precision measuring tools. \n, • Knowledge and experience of aerospace manufacturing processes and materials. \n, • Good communication skills, and the ability to work in a team environment. \n, • Strong problem solving and ability to create manual approaches to measuring. \n, • When required, ability to work in a fast pace environment to meet deadlines. \n\n In compliance with pay transparency requirements, the salary range for this role in the state of New Jersey is $18.50/hr - $59.13/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-AT4 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Non Destructive Testing film X-ray L2 Technician- 1st Shift Job Code: 34155 Job Location: Carlstadt, New Jersey Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: L3Harris is seeking an experienced Film Radiographic Testing Level 2 Inspector to process, interpret and evaluate materials, parts and weldments for compliance with required specifications and standards. Essential Functions: \n • Read and interpret information from work instruction documents, drawings and specifications, inspection procedures, material review reports and other source documents, and follow instructions the procedures and requirements needed to perform radiographic inspection of material, parts and weldments. \n, • Perform X-ray level 2 tasks in accordance to work instructions from approved general procedures & techniques. \n, • Set up and operate industrial x-ray equipment. Have the skills and knowledge to conduct system performance checks in accordance with the applicable process standard. \n, • Detect and identify indications affecting quality and safety factors such as cracks, inclusions, cavities, undercuts, incomplete fusion and porosity, etc. \n, • Determine and disposition (accept or reject) items based on NDT results. \n, • Record test results, findings and dispositions manually or with the aid of a computer or computer based system. \n, • Coordinate recurring defects with concerned with supervisor and quality engineer personnel, and if required recommend corrective action measures. \n, • Test and pass NAS 410 Level II certification in house. \n, • Able to pass vision test requirements. \n\n Qualifications: \n • High School Diploma or GED. \n, • A minimum of 800 hours experience in industrial X-ray experience inspecting aerospace components. \n, • Previously certification as an X-ray Level 2 to specification ASNT or NAS410. \n, • Have a basic knowledge of product manufacturing and inspection technology. \n, • Computer experience to include accessing on-line documents and information, working within the company business systems and Microsoft office. \n\n Preferred Additional Skills: \n • Experience in other NDT methods such as Fluorescent penetrant Inspection \n, • Experience in digital Industrial X-ray also preferred but not required. \n, • Proficiency using precision measuring tools. \n, • Knowledge and experience of aerospace manufacturing processes and materials. \n, • Good communication skills, and the ability to work in a team environment. \n, • Strong problem solving and ability to create manual approaches to measuring. \n, • When required, ability to work in a fast pace environment to meet deadlines. \n\n In compliance with pay transparency requirements, the salary range for this role in the state of New Jersey is $18.50/hr - $59.13/hr. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-AT4 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Raytheon - - - Responsibilities: Follows blueprints, guidelines, and/or diagrams to ensure product specifications and tolerance levels are met; Performs troubleshooting, calibrations or modifications of hardware, fixtures and software; Uses measuring and diagnostic tools to test and modify systems

Marmon - - Responsibilities: Maintain and repair all production equipment; Perform preventive maintenance to production equipment; Organize and maintain an organized maintenance shop; Interact with Engineer & Production Team; coordinate jobs/projects on a daily basis; Review all work orders and com

Reports to: Transport Supervisor or Facility Operations Manager.Position Overview: The Delivery Technician provides transportation and security support to our manufacturing operation and ensures that Columbia Care products make it from each site in a timely and safe manner.Imperative to the success

Aseptic Technician Associate will independently perform the tasks of the aseptic manufacturing operation specific to bulk, and fill manufacturing. This includes collection and extraction of hyaluronic acid (HA), HA gel manufacturing, buffer and saline production, intermediate bulk manufacturing, fil

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . The Production Technician I is responsible for the aseptic manufacturing of Cresilon’s products for the animal health industry. The Production Technician II will be trained in clean room operations, aseptic techniques, and must demonstrate the ability to successfully pass gowning qualifications. The position involves operating simple and complex processing equipment, routine sanitization of cleanroom facilities, and manual cleaning of equipment. The ideal candidate will have a proven track record of steady progress in a similar manufacturing environment and must possess a willingness to learn all equipment and jobs in the assigned manufacturing and sanitation of clean room facilities as required. Production Technicians are also responsible for the quality of products produced by ensuring compliance with local, State and Federal regulations, including current Good Manufacturing Practices (cGMP). • Perform line clearance of assigned production areas as required., • Perform equipment set up and disassembly activities., • Operate production, assembly and testing equipment, including heat sealers, bar code scanners, weighing scales, tumblers, autoclaves, filling equipment, and packaging equipment., • Formulate, fill, and pouch product in accordance with SOPs., • Troubleshoot all operating deviations and issues and coordinate with other functions when required., • Report both machine and operating deviations to area supervisor or designee., • Perform routine, preventative maintenance on equipment., • Perform cleaning and disinfection of the manufacturing spaces., • Perform cleaning and sterilization of manufacturing equipment., • Perform visual inspection of components and/or product in accordance with SOP’s and cGMP’s., • Perform sampling, intermediate, and finished goods packaging as per SOPs., • Package and ship raw materials for sterilization., • Perform material receiving, staging, material movements, and material replenishment as per SOPs., • Transport samples, materials, and equipment between multiple facilities., • Complete data entry and generate reports for material inventory movements., • Complete and maintain applicable logbooks and batch record paperwork as required and in accordance with GMP and GDP standards., • Maintain a clean production environment during shift., • Report all actual, near misses and potential accidents for further investigation., • Take immediate action to resolve any near miss situations., • Assist in investigation of all actual, near misses and potential accidents. Provide information to troubleshoot and take initiative to resolve operational issues independently., • Assist in project commissioning and validation activities, as necessary., • Prepare samples or prototypes as required for testing, or other evaluations, • Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process., • Complete all required trainings: Read and Understand (TM1), Computer Based Training with Quiz (TM2), Instructor Led (TM3/TM4), and On-the-Job Trainings (TM5)., • Oversee training of junior employees on production processes as assigned., • Ensure proper communication and handling over of shift duties., • Support Environmental and Personnel Monitoring (EM/PM) activities as directed., • HS Diploma or Equivalent with 2+ years of relevant manufacturing experience in the pharmaceutical, biotechnology, or medical device industry OR 2 or 4 year degree with 0+ years of relevant experience., • Ability to read, understand, and execute written work instructions., • Ability to complete documentation accurately., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Ability to become gowning qualified to work in a cleanroom environment., • Ability to problem solve and achieve business objectives., • Ability to adapt training approach., • Willingness to be flexible, and open minded to new processes or changes in direction., • Team oriented, building relationships with peers and managers in a proactive manner., • Excellent verbal and written communication skills., • Proficient in Microsoft Office (Word, Excel, Outlook)., • Paid Vacation, Sick, & Holidays, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage, • Company Paid Life and Short-Term Disability Coverage, • Work/Life Employee Assistance Program, • 401(k) & Roth Retirement Savings Plan with company match up to 5%, • Monthly MetroCard Reimbursement This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description About the Field Service Team The Field Service Team ensures Aniai builds lifelong customers across the globe. With the rapid deployment of our flagship product, Alpha Grill, our Field Service Engineers (FSEs) are out at customer sites training kitchen teams, leading installations and solving the unpredictable issues that happen in the startup environment. The Field Service Team has 8 members right now, 7 in Korea and 1 in our NYC HQ. We’re looking for another rock star to join our team in the early stages within the US market. About the Field Service Manager (FSM) Role We are looking for a rock-star FSM to build the field engineering team from the ground up. You will come in with some ready-to-go playbooks from our team in Korea, but we’re expecting you to bring rich experience in leading installations and maintenance for high tech machines, training and managing external service technicians, and building processes and infrastructure for how the team operates. You will manage our FSE from day one, and you will become the go-to expert for our customers and internal teams, lending your knowledge and skillset to optimize performance, provide technical support and education, and deliver exceptional customer service. Here’s the fine print: Customers • Deployments: Install Alpha Grill in customer sites, ensuring proper configuration and calibration for optimal performance., • User Training: Provide comprehensive training and guidance to customers on how to use Alpha Grill and what common issues they can self-resolve., • Maintenance: Monitor Alpha Grill performance KPIs, identify areas of improvement, and promptly address customer concerns or issues. Troubleshoot issues remotely or conduct site inspections as needed. Carry out repairs, ensuring we meet standard service level agreements set. Service Providers & Technicians • Trainings: Develop and lead training programs for onboarding 3rd party service technicians., • Service Network Dispatch: Manage nationwide service network and dispatching service calls to appropriate technicians., • SLA Management: Ensure service technicians meet SLAs and provide escalation training and response support when technicians do not achieve desired targets. Team Infrastructure • Field Service Playbook: Build the team playbook, creating and managing KPIs against standard installation processes, site visits and general service calls., • Service Manual: Build our first service manual, creating a comprehensive document which serves as the technical resource for all technicians. Miscellaneous • Demo Unit Maintenance: Support our test kitchens and tradeshows with technical deployment setup and assistance., • Product Recipe Testing: Support sales team by testing recipes coming from potential and existing customers on the Alpha Grill. We ask Everyone at Aniai to: • Have a bachelor's degree., • Be excited to work at our NYC HQ 5 days per week. We pride ourselves in building community through our in-person culture., • Love burgers. What is your favorite burger? We want to know!, • Communicate effectively and love cross-collaborative efforts. Our teams span across the US and Korea, which takes patience, kindness and communication to make it work., • Have a hustle mentality, solve problems and act quickly. We’re a rapidly growing startup, we don’t have time to waste., • (Bonus) Have experience in early-stage startups., • (Bonus) Have experience in robotics, kitchen equipment manufacturing, or restaurants. We ask FSMs at Aniai to: • Have an educational background in mechanical or electrical engineering., • Have made incredible impacts in their prior experience. We think this takes the equivalent of roughly 5+ years in Field Service to do. You will be the most accomplished field engineer on our team and your prior experience should show this., • Have trained and led field service teams, including managing external technician networks nationwide., • Deep experience building 0-1 processes and playbooks. Assume nothing exists today, we need you to build it., • Have some experience or general awarenss of managing P&L for the field service team. You may not have had direct control of the P&L in your prior experience but you’ve had exposure to it and understand how to reduce team costs., • Be top tier communicators. You not only possess a deep understanding of technical concepts, but you also know how to communicate these to non-technical audiences with ease., • Travel at least 50% to customer locations across the United States. We require a valid US Driver's License with a clean record., • Solve problems every day. You most likely love puzzles and have a knack for finding creative solutions to the toughest issues., • Be organized in their approach to customer deployments and maintenance. Startups are chaos so we aim to find someone methodical and logical in everything they do., • (Bonus) Have experience in deploying and servicing robotic products! Don’t meet all our requirements? Don’t worry! We still want to meet you even if you find yourself only nailing 50%. So, if this feels like an incredible opportunity, apply anyways. Benefits We’re focused on one thing and one thing only – growth. Our benefits reflect our ability as an early-stage startup to give our employees the space and resources they need to focus on growth and be successful here at Aniai. We hope to continue expanding our benefits as we expand our business, but today we offer the following: • Compensation at $80-100k based on prior experience, • Meaningful Equity, • 100% Covered Top-Tier Medical, Dental & Vision insurance, • 15 Days PTO + 5 Paid-Sick Days + 8 Company Holidays, • NYC HQ Loft with free coffee, snacks, drinks and more!, • Apple Macbook + other equipment necessary to do the job, • Team bonding activities, • Access to Alpha Grill, and we guarantee plenty of food!

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Job Title: 3D Print & Wax Technician Assistant (Jewelry Production) Location: New York, NY Company: TraxNYC Job Type: Full-Time / Part-Time (On-site) About TraxNYC TraxNYC is a high-end luxury jewelry brand renowned for crafting some of the most exquisite and detailed jewelry pieces in the world. With a history of innovation and a commitment to the finest craftsmanship, we are looking for a talented, creative, and detail-oriented Jewelry Designer who specializes in 3D modeling and CAD design to join our growing team. This is a unique opportunity to work in an exciting, fast-paced environment with a team that values both artistic vision and technical expertise. We are looking for a 3D Print & Wax Technician Assistant to support our jewelry production workflow, specifically in wax printing, handling, and prep for casting. Role Overview The 3D Print & Wax Technician Assistant will support daily operations related to wax 3D printing, post-processing, and production coordination. This role is ideal for someone detail-oriented, hands-on, and interested in jewelry manufacturing and 3D printing technologies. You will work closely with senior technicians, designers, and production managers to ensure smooth output from digital design → wax print → casting prep. Key Responsibilities 3D Printing & Wax Handling • Assist with operating wax 3D printers (setup, start jobs, monitor prints), • Remove, clean, and post-process wax prints carefully, • Inspect wax models for defects (cracks, layer issues, incomplete prints), • Label, organize, and track wax models for casting Production Support • Prepare waxes for casting (spruing support, storage, handling), • Maintain cleanliness and organization of print and wax stations, • Assist with printer maintenance (resin/wax refills, cleaning, basic troubleshooting), • Track daily print jobs and report issues to senior technicians Quality Control • Ensure wax models meet quality standards before casting, • Follow proper handling techniques to avoid breakage or distortion, • Communicate print or design issues promptly Documentation & Workflow • Log print jobs, failures, and reprints, • Help maintain production schedules and timelines, • Follow standard operating procedures (SOPs) and safety guidelines Required Qualifications • High attention to detail and steady hands, • Comfortable working with small, delicate components, • Ability to stand for extended periods and perform hands-on work, • Willingness to learn jewelry production processes, • Reliable, organized, and punctual Preferred (Nice to Have) • Experience with 3D printers (wax or resin), • Jewelry manufacturing or casting experience, • Familiarity with CAD files or design workflows, • Experience working in production, manufacturing, or lab environments What We Offer • Hands-on training in luxury jewelry production, • Exposure to advanced 3D printing and casting workflows, • Growth opportunities within TraxNYC production team, • Fast-paced, creative, and collaborative work environment Work Environment • On-site production facility, • Jewelry workshop with specialized equipment Expected hours: 40 – 50 per week Benefits: • Employee discount Company DescriptionAbout Us: TraxNYC Jewelry is a leading name in the jewelry industry, renowned for our unique designs and unparalleled quality. We are committed to crafting exquisite jewelry pieces and providing exceptional customer service.About Us: TraxNYC Jewelry is a leading name in the jewelry industry, renowned for our unique designs and unparalleled quality. We are committed to crafting exquisite jewelry pieces and providing exceptional customer service.

Job DescriptionDescription: Do you dream about being part of History and promoting NYC’s most iconic destination for fun? Luna Park In Coney Island is actively recruiting qualified candidates for Seasonal Emergency Medical Technician (EMT) positions. About Us: Central Amusement International Inc. (CAI) is an amusement park development and management company located in New York City. In 2003, CAI developed Victorian Gardens at Wollman Rink in Central Park, and in 2010 developed Luna Park in Coney Island, at the site of the birthplace of the amusement industry. CAI is part of the Zamperla Group, which is the worldwide leader in the manufacturing of amusement rides. Embark in a crucial role as an Emergency Medical Technician at our bustling amusement park, where your expertise will play a pivotal part in ensuring the safety and well-being of our guests. Our EMT's provide paramedic-level medical care to team members and our guests. This position, responds to an emergency, rescue, and medical incidents; provides support functions, emergency responses, records and reporting duties, and emergency medical treatment including but not limited to medical emergencies, and trauma emergencies. Plans, organizes, directs, and controls medical service functions within applicable laws, codes, rules, and regulations. Location: Luna Park in Coney Island, 1000 Surf Avenue, Brooklyn, NY 11224, USA Job Description: • Provide prompt and effective emergency medical services throughout the park., • Act as a first responder, able to handle various emergencies with precision and care., • Swift response to all rescue calls, demonstrating agility and readiness in critical situations., • Ensure that all equipment is meticulously prepared and in optimal working conditions., • Conduct general maintenance and upkeep of apparatus and equipment to guarantee operational efficiency., • Actively participating in preventative maintenance activities for medical equipment and station upkeep., • Accurately creating various reports and documents to provide detailed insights into emergency response activities., • Performing any related duties as assigned, showcasing flexibility and dedication to the team's mission. Requirements: • Proven knowledge of emergency medical care at the EMT level; local codes related to emergencies; state statutes, city ordinances, and standard office practices and procedures., • Friendly and approachable demeanor with excellent communication skills., • Physical stamina for standing and moving throughout the shift., • Ability to engage with guests and create a positive, memorable experience., • Operate medical equipment with precision and expertise to support emergency medical services., • Communicate clearly and effectively, both orally and in writing, ensuring seamless information flow

Job Description The Quality Assurance Technician is responsible for routine inspection and testing of raw materials and components as well as of final product for Cresilon’s products in the Animal and Human Health industries. This position requires a strong attention to detail as the individual will be responsible for identifying deviations in product quality or safety and ensuring compliance with local, state, and federal regulations, including current Good Manufacturing Practices (cGMP). Position is for 2nd shift. Responsibilities: • Sample and perform visual inspection of final products and raw materials. Perform other testing under the direction of QA Operations Manager., • Perform line clearance activities and in-process inspections., • Monitor routine manufacturing operations for conformance to applicable procedures (see Gowning Qualification requirements below), • Transfer materials between facilities (see lifting requirements below), • Facility 1 of 2: 122 18th Street, Brooklyn, NY 11215, • Facility 2 of 2: 87 35th Street, Suite 603/604/6R, Brooklyn, NY 11232, • Operate testing equipment such as force testers, torque testers, and balances., • Report all deviations in product, components, raw materials, and equipment per their relevant procedures, • Perform document control activities, including but not limited to printing logbooks and batch records., • Transcribe data into digital systems for tracking Quality Metrics., • Batch record review & support routine batch disposition Requirements Education: High School Diploma or Equivalent (2- or 4-year degree in Engineering, Science, or Technology/Biotechnology preferred) • Required experience in GMP and FDA regulated environments (ISO 13485:2016 preferred), • Ability to be Gowning Qualified per Cresilon’s SOP., • 1 year experience in regulated industry highly desirable · Paid Vacation, Sick, & Holidays · Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage · Company Paid Life and Short-Term Disability Coverage · Work/Life Employee Assistance Program · 401(k) & Roth Retirement Savings Plan with company match up to 5% · Monthly MetroCard Reimbursement The salary for this role is $25/Hour Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Aerotek - - Responsibilities: Work at your own bench or on the assembly line; Strip wires and assemble basic mechanical components; Utilize hand and power tools, such as wrenches and drills; Assist with heavy lifting as needed.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job Description About the Field Service Team The Field Service Team ensures Aniai builds lifelong customers across the globe. With the rapid deployment of our flagship product, Alpha Grill, our Field Service Engineers (FSEs) are out at customer sites training kitchen teams, leading installations and solving the unpredictable issues that happen in the startup environment. The Field Service Team has 8 members right now, 7 in Korea and 1 in our NYC HQ. We’re looking for another rock star to join our team in the early stages within the US market. About the Manager, Field Engineering Role We are looking for a rock-star Manager to build the field engineering team from the ground up. You will come in with some ready-to-go playbooks from our team in Korea, but we’re expecting you to bring rich experience in leading installations and maintenance for high tech machines, training and managing external service technicians, and building processes and infrastructure for how the team operates. You will manage our FSE from day one, and you will become the go-to expert for our customers and internal teams, lending your knowledge and skillset to optimize performance, provide technical support and education, and deliver exceptional customer service. Here’s the fine print: Customers • Deployments: Install Alpha Grill in customer sites, ensuring proper configuration and calibration for optimal performance., • User Training: Provide comprehensive training and guidance to customers on how to use Alpha Grill and what common issues they can self-resolve., • Maintenance: Monitor Alpha Grill performance KPIs, identify areas of improvement, and promptly address customer concerns or issues. Troubleshoot issues remotely or conduct site inspections as needed. Carry out repairs, ensuring we meet standard service level agreements set. Service Providers & Technicians • Trainings: Develop and lead training programs for onboarding 3rd party service technicians., • Service Network Dispatch: Manage nationwide service network and dispatching service calls to appropriate technicians., • SLA Management: Ensure service technicians meet SLAs and provide escalation training and response support when technicians do not achieve desired targets. Team Infrastructure • Field Service Playbook: Build the team playbook, creating and managing KPIs against standard installation processes, site visits and general service calls., • Service Manual: Build our first service manual, creating a comprehensive document which serves as the technical resource for all technicians. Miscellaneous • Demo Unit Maintenance: Support our test kitchens and tradeshows with technical deployment setup and assistance., • Product Recipe Testing: Support sales team by testing recipes coming from potential and existing customers on the Alpha Grill. We ask Everyone at Aniai to: • Have a bachelor's degree., • Be excited to work at our NYC HQ 5 days per week. We pride ourselves in building community through our in-person culture., • Love burgers. What is your favorite burger? We want to know!, • Communicate effectively and love cross-collaborative efforts. Our teams span across the US and Korea, which takes patience, kindness and communication to make it work., • Have a hustle mentality, solve problems and act quickly. We’re a rapidly growing startup, we don’t have time to waste., • (Bonus) Have experience in early-stage startups., • (Bonus) Have experience in robotics, kitchen equipment manufacturing, or restaurants. We ask Managers, Field Engineering at Aniai to: • Have an educational background in mechanical or electrical engineering., • Have made incredible impacts in their prior experience. We think this takes the equivalent of roughly 5+ years in Field Service to do. You will be the most accomplished field engineer on our team and your prior experience should show this., • Have trained and led field service teams, including managing external technician networks nationwide., • Deep experience building 0-1 processes and playbooks. Assume nothing exists today, we need you to build it., • Have some experience or general awarenss of managing P&L for the field service team. You may not have had direct control of the P&L in your prior experience but you’ve had exposure to it and understand how to reduce team costs., • Be top tier communicators. You not only possess a deep understanding of technical concepts, but you also know how to communicate these to non-technical audiences with ease., • Travel at least 50% to customer locations across the United States. We require a valid US Driver's License with a clean record., • Solve problems every day. You most likely love puzzles and have a knack for finding creative solutions to the toughest issues., • Be organized in their approach to customer deployments and maintenance. Startups are chaos so we aim to find someone methodical and logical in everything they do., • (Bonus) Have experience in deploying and servicing robotic products! Don’t meet all our requirements? Don’t worry! We still want to meet you even if you find yourself only nailing 50%. So, if this feels like an incredible opportunity, apply anyways. Benefits We’re focused on one thing and one thing only – growth. Our benefits reflect our ability as an early-stage startup to give our employees the space and resources they need to focus on growth and be successful here at Aniai. We hope to continue expanding our benefits as we expand our business, but today we offer the following: • Compensation at $80-100k based on prior experience, • Meaningful Equity, • 100% Covered Top-Tier Medical, Dental & Vision insurance, • 15 Days PTO + 5 Paid-Sick Days + 8 Company Holidays, • NYC HQ Loft with free coffee, snacks, drinks and more!, • Apple Macbook + other equipment necessary to do the job, • Team bonding activities, • Access to Alpha Grill, and we guarantee plenty of food!

Job Description Water Treatment Chemical Service Technician—New York City. 2025 was a Record Sales Year. And 2026 is off to a great start. Garratt-Callahan is family friendly, profitable, stable, and fiercely private. No layoffs in 120 years. No ownership changes in 120 years. 75 straight years of profitability. We have operations from Asia to the Caribbean, and in every state in the USA. Technical Sales Support Service Technicians are responsible for maintaining the existing customers in New York City. The best place to live is in or very near New York City. Perform water treatment tests at the existing customers. With the freedom of working from your home, you can work and train in a territory alongside veteran Territory Managers. The career track for a Technical Sales Support/Service Technician is to train to become a Territory Manager. Territory Managers are eligible for unlimited commission and a year-end bonus. As a Technical Sales Support/Service Technician, you will receive an industry competitive salary, expenses, benefits, and a $675 per month car allowance. In addition, ample technical support is provided along with continuous training. Paperwork is kept to a minimum. Compensation is based upon experience and the ability to succeed. $80,000 to $100,000 first year base for a qualified candidate. We hire with a focus that favors the committed employee both in terms of overall compensation and growth opportunities. We have designed our compensation package accordingly. Available Benefit Package includes a corporate 401k, health, dental, vision, and life insurance. Job Responsibilities: • Solve customers' water problems., • Treat industrial boilers and cooling towers to keep them energy efficient and environmentally friendly., • Perform detailed water testing & analyses at industrial sites such as commercial buildings, food processing plants, hospitals, manufacturing plants, government Buildings, and military bases., • Help sell Garratt-Callahan's proprietary chemical blends, equipment, & monitoring technology., • Help sell corrosion & scale inhibitors, coagulants, flocculants, biocides, bio-augmentation, feed & monitoring equipment, water management plans, reverse osmosis products., • Help sell Water Safety Programs., • Keep our existing customers happy. Garratt-Callahan is a US based private 120-year-old, nationwide water treatment chemical company. Garratt-Callahan treats industrial boilers and cooling towers to keep them energy efficient and environmentally friendly with one of the most advanced product lines in the industry. We are registered to ISO 9001:2015 and sell an industry leading line of “green" solutions, G-C GreenTech. We are headquartered in Burlingame, California. G-C is family owned, profitable, and expanding. We have five chemical plants in the USA, technical salespeople in every state, and operations in Asia, the Pacific, and the Caribbean. Benefits: • We offer a competitive benefit package which includes medical, dental, vision, AD&D, LT, and 401k. A monthly car allowance and travel expenses are provided., • First year compensation is $80,000 to $100,000 depending on experience., • Advanced training, and a clear career path., • Family friendly, flexible hours., • A huge benefit of working for Garratt-Callahan is our stability and low turnover., • No Layoffs in our 120-year history, • G-C is a profitable company. The last year that G-C did not turn a profit was during World War 2., • 2025 was a record sales year, and 2026 sales are off to a great start. To Apply, please log on to: Thank you for considering Garratt-Callahan Company. Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. NOTE: Garratt-Callahan does not sponsor work visas. No recruiters please. Requirements: You will be a successful applicant if you have a technical degree such as Chemistry, Chemical Engineering, Biology, Mechanical Engineering, Environmental Science, Paper Science, or Water Resources. You must have a 4-year science degree to qualify for this position. You must be a capable Chemist. One-year technical sales, or an internship related to water treatment chemicals is preferred, but we are willing to train and mentor. Outside industrial sales experience is a plus. You must live in this New York territory, anywhere within the Five Boroughs is best, and be familiar with the industrial marketplace of NYC. If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at 650.697.5811. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, data center, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, Suez, chemtreat, veolia, solenis, chem-aqua, kurita, evoqua, fremont, Barclay, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides, New York City, NYC, The Bronx, Brooklyn, Manhattan, Queens, Staten Island.

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: To Live and Lead Safety · Takes responsibility for employee safety and wellness by deploying the ATS safety program and ensuring effective completion of safety training, observations, and incident investigations. · Implements and actively supports all Beyond Zero initiatives · Enables the growth of a customer safety culture by a fostering a safety partnership and sharing best practices To Inspire and Provide Clarity on Vision and Strategy · Motivates employees by communicating a clear vision that enables all employees to understand the rationale for, and the benefit of, both site-level and company-wide objectives · Acts as an effective change agent, leading the implementation of strategic initiatives through positive team communications, appropriate action planning, and successful implementation activities · Understands and appropriately articulates both ATS and customer strategies, providing the team with line of sight between team responsibilities and strategic outcomes To Own Our ATS Culture · Builds positive relationships with ATS employees, customers, and peers through open communication and role-modeling the ATS leadership core competencies of honesty and respect · Sets a positive, influential standard for others and creates a constructive climate for their team · Influences with transparency and use participative methods to ensure that decisions are understood and accepted · Establishes a positive work environment through managing and personalizing onboarding; engaging in ongoing one-on-one communications; and recognizing individual contributions and achievements on a timely basis · Adheres to policies and procedures and ensures that staff understands the rationale behind policies and processes To Support Our Employees' Learning and Growth · Leads and builds team capabilities by working with individuals on performance improvement, career planning, training, and skills development. · Develops, communicates, and executes a Skills Matrix and Technician Training Plan · Builds and maintains a succession plan for key positions (i.e., Supervisors, Supply Chain, P/S, RE) To Ensure and Drive our Business Results · Leads and ensures the Operating System is understood, reinforced, and embedded · Develops and executes a site-specific maintenance plan per ATS standards · Manages financial performance of the site (revenue, expenses, and profit) to achieve set objectives · Develops and maintains effective relationships with all ATS business units, fully utilizing their services and ensuring cross-functional alignment · Collaborates with and builds customer relationships to ensure priority alignment and proactively anticipates customer needs as the primary on site contact · Ensures alignment of customer expectations and ATS site goals through management of site-specific contracts · Communicates with the customer through daily, weekly, and monthly meetings and conducts a regular review of the performance metrics with the customer · Drives a continuous improvement methodology and promotes cost savings · Analyzes and reports on key performance indicators, completing root cause analyses and developing and executing action items while removing barriers and addressing issues · Collaborates with sales and operations leadership to increase the scope of services Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor's degree in technical, business, or a related field preferred or seven years of operations / maintenance experience · Three years of supervisory experience with a strong focus on development of employees · Resilient and flexible, able to multitask and prioritize with an innate ability to understand and accept change and motivate others around change · Highly tuned emotional intelligence with demonstrated ability to build relationships and lead teams with honesty and integrity to achieve goals · Solid understanding of manufacturing / assembly work environment · Business acumen · Positive influencer with appropriate levels of organization. · Strong customer focus with the ability to build positive business relationships and show a sense of urgency Desirable KSAs · Manufacturing maintenance experience preferred with related certifications and training · Good understanding of, and/or experience with, proactive/reliability maintenance processes, i.e., Planning/Scheduling, P/M, PdM, and root cause analysis, and continuous improvement methodologies · Good computer skills, including Microsoft applications and web-based applications such as Power BI, GEAC, Concur, Workday and related software · Time management skills · Ability to relocate to specified locations · Excellent communications skills (verbal, written, and presentation) · Agile, curious learner and authentic, credible teacher · Financial acumen and knowledge of forecasting and managing budgets Leadership Core Competencies: Business and Company Acumen Lead with honesty and integrity Build bold and relevant strategies Welcome and motivate change Recognize the right outcomes and how they were achieved Role model safety and wellness Emotional Intelligence Provide psychological safety Be self-aware Build relationships Ask for and act on feedback Respect diverse background and viewpoints Lead in the Present; Eye to the Future Commit to accountability Coach people to their potential Own talent development and placement Turn problems into opportunities Be resilient and flexible Communicate, Communicate, Communicate Practice transparency Build relationships through respect Be a curious learner and credible teacher Influence in a proactive, positive way Ensure cross functional awareness/decisions ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$126,275.62—$168,367.53 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Principal Duties/Responsibilities: To Live and Lead Safety · Takes responsibility for employee safety and wellness by deploying the ATS safety program and ensuring effective completion of safety training, observations, and incident investigations. · Implements and actively supports all Beyond Zero initiatives · Enables the growth of a customer safety culture by a fostering a safety partnership and sharing best practices To Inspire and Provide Clarity on Vision and Strategy · Motivates employees by communicating a clear vision that enables all employees to understand the rationale for, and the benefit of, both site-level and company-wide objectives · Acts as an effective change agent, leading the implementation of strategic initiatives through positive team communications, appropriate action planning, and successful implementation activities · Understands and appropriately articulates both ATS and customer strategies, providing the team with line of sight between team responsibilities and strategic outcomes To Own Our ATS Culture · Builds positive relationships with ATS employees, customers, and peers through open communication and role-modeling the ATS leadership core competencies of honesty and respect · Sets a positive, influential standard for others and creates a constructive climate for their team · Influences with transparency and use participative methods to ensure that decisions are understood and accepted · Establishes a positive work environment through managing and personalizing onboarding; engaging in ongoing one-on-one communications; and recognizing individual contributions and achievements on a timely basis · Adheres to policies and procedures and ensures that staff understands the rationale behind policies and processes To Support Our Employees’ Learning and Growth · Leads and builds team capabilities by working with individuals on performance improvement, career planning, training, and skills development. · Develops, communicates, and executes a Skills Matrix and Technician Training Plan · Builds and maintains a succession plan for key positions (i.e., Supervisors, Supply Chain, P/S, RE) To Ensure and Drive our Business Results · Leads and ensures the Operating System is understood, reinforced, and embedded · Develops and executes a site-specific maintenance plan per ATS standards · Manages financial performance of the site (revenue, expenses, and profit) to achieve set objectives · Develops and maintains effective relationships with all ATS business units, fully utilizing their services and ensuring cross-functional alignment · Collaborates with and builds customer relationships to ensure priority alignment and proactively anticipates customer needs as the primary on site contact · Ensures alignment of customer expectations and ATS site goals through management of site-specific contracts · Communicates with the customer through daily, weekly, and monthly meetings and conducts a regular review of the performance metrics with the customer · Drives a continuous improvement methodology and promotes cost savings · Analyzes and reports on key performance indicators, completing root cause analyses and developing and executing action items while removing barriers and addressing issues · Collaborates with sales and operations leadership to increase the scope of services Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor’s degree in technical, business, or a related field preferred or seven years of operations / maintenance experience · Three years of supervisory experience with a strong focus on development of employees · Resilient and flexible, able to multitask and prioritize with an innate ability to understand and accept change and motivate others around change · Highly tuned emotional intelligence with demonstrated ability to build relationships and lead teams with honesty and integrity to achieve goals · Solid understanding of manufacturing / assembly work environment · Business acumen · Positive influencer with appropriate levels of organization. · Strong customer focus with the ability to build positive business relationships and show a sense of urgency Desirable KSAs · Manufacturing maintenance experience preferred with related certifications and training · Good understanding of, and/or experience with, proactive/reliability maintenance processes, i.e., Planning/Scheduling, P/M, PdM, and root cause analysis, and continuous improvement methodologies · Good computer skills, including Microsoft applications and web-based applications such as Power BI, GEAC, Concur, Workday and related software · Time management skills · Ability to relocate to specified locations · Excellent communications skills (verbal, written, and presentation) · Agile, curious learner and authentic, credible teacher · Financial acumen and knowledge of forecasting and managing budgets Leadership Core Competencies: Business and Company Acumen Lead with honesty and integrity Build bold and relevant strategies Welcome and motivate change Recognize the right outcomes and how they were achieved Role model safety and wellness Emotional Intelligence Provide psychological safety Be self-aware Build relationships Ask for and act on feedback Respect diverse background and viewpoints Lead in the Present; Eye to the Future Commit to accountability Coach people to their potential Own talent development and placement Turn problems into opportunities Be resilient and flexible Communicate, Communicate, Communicate Practice transparency Build relationships through respect Be a curious learner and credible teacher Influence in a proactive, positive way Ensure cross functional awareness/decisions ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range - $126,275.62 - $168,367.53 ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Fire Alarm Technician NY/NJ, USA Founded in 1991, the Mircom Group of Companies is North America’s largest independent designer, manufacturer and distributor of intelligent building and life safety solutions. Reaching customers in over 100 countries worldwide, our portfolio includes: fire detection & alarm, communications & security, mass notification, nurse call, and building automation & smart technologies. Mircom’s mission is to save lives and protect property by providing a line-up of innovative and advanced solutions which are scalable to satisfy diverse user demands, from small buildings to the largest complexes. Our unwavering commitment to North American manufacturing enables us to offer the highest quality and best competitive value across our vast range of products and solutions. Summary: Reporting to the Area Sales Manager, the Fire Alarm Technician, will play a crucial role in providing technical support to our Dealers and ESDs in the NY-NJ territory, with the ability to extend support beyond as required. The successful candidate must be able to accommodate a flexible schedule. Join our dynamic team and contribute to the success of our fire protection solutions. The successful candidate must reside in central Jersey area or in one of the 5 Boroughs of New York City. Apply now to be part of an innovative company at the forefront of the industry. Key Responsibilities: • Occassionally perform Programming, Verification and Inspection of fire alarm systems, access control and intercom systems, along with other fire protection equipment, • Program to effectively navigate fire protection systems with our end users., • Conduct testing and evaluation of new products to ensure compliance with industry standards and regulations, • Conduct technical Lunch & Learn sessions to educate and inform clients on our products and services, • Provide technical support to customers as needed, • Provide operational training to end-users, • Extend our service offerings to better meet customer needs, • Collaborate with Engineering and Applications department to ensure seamless integration of technical solutions and effective communication with clients, • Address inquiries and resolve technical issues, while providing quality customer care, • Maintain accurate and organized documentation for all technical activities, including testing, verification, inspection and client interactions, • Ensure our customers and end-users have a positive experience working with Mircom, • Read and understand engineered drawings, specifications, programs, schematics, installation manuals, and service manualsRequirements and Skills:, • Possess a NICET Level 2 certification is an asset, or 3 to 5 years of fire alarm experience is preferred, • Completion of high school and/or trade school, • Proficient in Programming experience, • Proficient in Microsoft Office (PowerPoint, Excel and Word), • Thorough understanding of the high-rise market, including its unique challenges and code requirements, • Excellent communication skills (written and verbal), • Superb in planning, organization, and multi-tasking skills, • Customer-service oriented and a team-player, • Accurate and detail-oriented with the ability to gather & monitor information, assess & solve problems., • Other duties incidental to those described herein., • Ability to travel and overnight stays as required, • A great working environment with opportunity for career advancement, • Competitive salary, • Group Insurance benefits We would like to thank all applicants for their interest in this position however only those selected for interviews will be contacted. Mircom Group of Companies is an Equal Opportunity Employer committed to workforce diversity. Qualified applicants will receive consideration without regard to age, color, creed, disability, genetic information, national origin, race, religion, sex, sexual orientation, veteran status or any other category protected by law. Disclaimer: Mircom does not accept resumes from employment placement agencies, head-hunters or recruitment suppliers that are not in a formal contractual arrangement with us. Our recruitment supplier arrangements are restricted to specific hiring needs and do not include this or other job postings. Any resume or other information received from a supplier not approved in advance by Mircom to provide resumes to this posting or web-site will be considered unsolicited.

Job Description Instrumentation Controls Technician Location: Lyndhurst, NJ Schedule: Monday – Friday | 2:00 PM – 10:30 PM (2nd Shift) Pay: $35 – $40 per hour Type: Contract-to-Hire Are you the kind of person who can look at a control panel, hear a weird machine noise, and immediately start diagnosing the problem in your head? If PLCs, instrumentation, and troubleshooting industrial equipment are your thing, this could be a great fit. We are seeking an Instrumentation Controls Technician to support a busy manufacturing facility in Lyndhurst, NJ. In this role, you will work with plant systems, instrumentation, and control equipment to ensure operations run safely and efficiently. You will also help maintain calibration programs, troubleshoot automation issues, and support plant operations when technical challenges arise. If you enjoy solving technical problems and working hands-on with equipment and control systems, this is a strong opportunity with a company that values technical expertise. What You'll Do * Troubleshoot and maintain PLC and control systems supporting plant equipment * Maintain and repair instrumentation, sensors, and electrical systems * Analyze and test computer control systems based on system design specifications * Support machine operating systems and control programs * Perform instrument calibration and calibration documentation * Manage calibration schedules and maintain compliance with ISO 9000 requirements * Diagnose issues with labeling equipment and automated systems * Perform scheduled maintenance on electrical and electronic devices * Provide rotational weekend on-call support for plant operations when required What We're Looking For * Strong troubleshooting and analytical skills * Solid electrical and controls background * Experience with PLCs (Allen-Bradley preferred) * Experience with pneumatic and hydraulic systems * Ability to read technical drawings, P&IDs, and ladder logic diagrams * Experience performing instrument calibration * Strong communication skills and ability to work independently or on a team * Experience in industrial manufacturing environments such as chemical, pharmaceutical, or food processing is preferred * Technical school training or related degree preferred * Experience with CMMS systems and smart instruments is a plus Additional Details * Schedule: Monday–Friday, 2:00 PM – 10:30 PM * Pay: $35–$40/hour * On-Call: Weekend rotation for plant support * Position Type: Contract-to-Hire * Location: Lyndhurst, NJ About Zing Recruiting Zing Recruiting is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, or any other protected status under federal, state, or local law. We are committed to fostering a diverse and inclusive workplace. #ZINGZIP #ZINGNJ Company DescriptionZing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.

Job DescriptionDescription: About Us: Fischer Technology is a leading innovator and manufacturer of material analysis coating thickness measurement devices, delivering exceptional products and services to our customers. For over 70 years, we have built a reputation for providing industry with highly accurate and precise instrumentation. Our devices play a critical role in aerospace, durable goods, electronics, automotive, medical devices, green energy, and general manufacturing. As part of the Helmut-Fischer GmbH group, Fischer Technology’s diverse team of professionals work together to push the boundaries of measurement and meet the evolving needs of the manufacturing community. Position Overview: Due to continued sales growth, we are expanding our Service team. The Field Service Engineer will be responsible for installation, maintenance, repair, calibration, and certification of Fischer X-ray fluorescence (XRF) systems and related material analysis instrumentation. This role requires a highly motivated technical professional capable of working independently in customer environments across the United States. The ideal candidate will have strong electronics troubleshooting skills, mechanical aptitude, and experience working with X-ray or laboratory instrumentation. Travel is expected to be approximately 85%, including overnight travel by car and air. Education and Experience: • Associate's degree in electronics, 2-year technician school certificate, or BS Degree., • A minimum of 2 years’ work experience troubleshooting electronic equipment., • Ability to travel, including overnight., • Capable of independent troubleshooting and system diagnostics with schematics and mechanical diagrams., • Familiar with typical electronic diagnostic test methods and equipment, including oscilloscopes, multimeters, etc., • Ability to work with standard hand tools, soldering equipment, etc., • Computer hardware and software skills., • Mechanical aptitude is essential., • Able to lift 50 pounds., • Clean driving record., • U.S. citizenship is required. Benefits: • Competitive salary, • 401(k), • Health and dental insurance Requirements: Key Responsibilities: • Install, configure, and commission Fischer X-ray fluorescence (XRF) systems at customer sites., • Perform preventative maintenance, diagnostics, repair, and calibration of X-ray-based instrumentation., • Conduct on-site instrument certifications and performance verifications., • Troubleshoot complex electronic, mechanical, and software systems using schematics, diagrams, and diagnostic tools., • Ensure compliance with applicable radiation safety standards and company safety protocols., • Provide customer training on proper operation, safety procedures, and basic maintenance of Fischer instrumentation., • Deliver technical support via phone, email, and on-site visits., • Accurately complete service reports, documentation, and required regulatory paperwork., • Communicate technical issues, recurring problems, or product improvement opportunities to the Service Manager., • Support continuous improvement initiatives within the Service Department.

Aseptic Technician Associate will independently perform the tasks of the aseptic manufacturing operation specific to bulk, and fill manufacturing. This includes collection and extraction of hyaluronic acid (HA), HA gel manufacturing, buffer and saline production, intermediate bulk manufacturing, fil

Job Description DIRECT HIRE OPPORTUNITY Job Description The Maintenance Technician is responsible for troubleshooting, repairing, and maintaining CNC and production equipment in a manufacturing environment. This role focuses on identifying root causes of equipment failures and implementing corrective actions to support production uptime, equipment reliability, and safe operations. Pay $20.00 – $28.00 per hour Schedule 1st shift: 7:00AM - 3:30PM 2nd shift: 5:30PM - 2:00AM Job Duties • Troubleshoot and repair CNC machines and production equipment to support manufacturing operations, • Identify root causes of equipment failures and implement corrective actions to prevent repeat issues, • Diagnose and resolve issues related to mechanical alignment, electrical components, CNC controls, and machine software, • Troubleshoot and repair peripheral devices and automation systems connected to production equipment, • Perform repairs and maintenance involving servo systems, PLCs, hydraulics, and pneumatic systems, • Interpret mechanical, electrical, and assembly drawings to support equipment repairs and modifications, • Perform preventive maintenance tasks to ensure equipment reliability and operational efficiency, • Maintain accurate maintenance documentation and technical reports as required, • Follow all company safety policies, procedures, and safe work practices, • Identify opportunities for equipment improvements and operational efficiency, • Perform additional maintenance or technical duties as assigned Requirements • Associate’s degree in Electronics or a related technical field, or equivalent combination of education and experience, • Minimum of 7 years of experience maintaining CNC machinery and production equipment, • Strong experience working with CNC controls, servo systems, PLCs, and automation systems, • Strong mechanical background including precision measurement, machine tool theory, hydraulics, and pneumatics, • Ability to read and interpret mechanical and electrical drawings

Job DescriptionPIRTEK, the nation’s leading provider for on-site hydraulic and industrial hose replacement is hiring for the position of Hose Installation Technician. Job Description: PIRTEK is looking to hire a Hose Installation Technician to service, assemble and install hoses for a diverse customer’s base such as manufacturing, construction, and rental companies, to name a few. We are looking for applicants with excellent communication and strong customer service skills. If you are mechanically inclined, enjoy meeting and working with customers, PIRTEK could be an excellent career path. As a PIRTEK Hose Installation Technician, you will be operating out of a PIRTEK Service & Supply Center in a purpose-built mobile hose workshop/van and be carrying out service calls in the local area. This provides the opportunity to develop relationships with new and existing customers. Successful candidates will be fully trained to operate a purpose-built PIRTEK service truck fitted with specialized equipment designed to fabricate flexible hose assemblies on site. Responsibilities: • Service, assemble and install hoses for a diverse customer’s base, • Carry out service calls in the local area, • Develop relationships with new and existing customersQualifications:, • High School Diploma or GED, • Mechanically Inclined, • Good Communication Skills, • Positive attitude, • Self-motivated, • Clean driving recordBenefits:, • Competitive salary (Depending on experience), • Certified training, • Company vehicle, • Career advancement within

Job Description MIH Systems Group is a growing company in the evolving field of building commissioning, and we strive to make buildings work better. Specializing in the optimization of complex building systems, our team's diversified skill set provides value to our clients from the design stages of new construction all the way through operating existing buildings. Our consulting group provides a full array of commissioning services for both new and existing buildings, and our technical services group provides start-up services on complex HVAC equipment from a wide range of manufacturers. The MIH team consists of experienced industry-leading professionals, focused on logistical, energy and cost-effective solutions to our clients. The HVAC Service Technician specializes in the start-up and service of equipment for a variety of applications of air-conditioning, heating, ventilation, humidity control and energy management. We are searching for both experienced and entry-level HVAC technicians to help support the growing service business. The candidate must be able to troubleshoot and repair HVAC systems, be dependable and have good customer service skills. This role would service our NYC Metro area. Requirements: * 5+ years of solo field experience with commercial heating and air conditioning. (Journeyman) * Must have knowledge of commercial air-conditioning, heating, water source heat pumps & rooftop packaged HVAC systems. * Advanced knowledge of refrigeration. * Controls background a plus. * Manufacturing representative a plus. * EPA Type 1 & 2 of universal certification * Must have your own hand tools. * MUST have a clean driving record. * OSHA 10-hour training certification (preferred). Estimated Salary: $55/hr - $65/hr, with flexibility based on experience and skills. MIH Systems Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. You should be proficient in: • HVAC/R Systems, • Journeyman’s License, • OSHA 10-Hour Certification (OSHA 10), • HVAC Service & Installation, • HVAC Maintenance, • HVAC Troubleshooting, • HVAC Repair

Job Description Genoray America is a fast-growing company that specializes in X-Ray medical devices. As a company specializing in research, developing, manufacturing and sales, Genoray has been recognized as a leading company in the C-Arm industry in South Korea and remains a leader in this market. We pride ourselves on being an exporting company and we will continue to spread the reputation of South Korea and Genoray across the World. * Our Service Technicians use technical skills to diagnose issues when they arise to keep medical and dental X-Ray equipment operating properly. The Service Technician will install, troubleshoot, and make repairs on equipment while providing a relationship of trust that enables loyalty, satisfaction, and assurance to our clients. Responsibilities: • Manages service calls and work orders for each job in a timely manner., • Troubleshoots heavy medical and dental equipment and mechanisms onsite and/or remotely., • Performs service, maintenance, repair, training, and installation on: C-Arm, Mammography, 2D, 3D, and IOS-I0X equipment., • Performs hazard assessments and maintains a high standard of safe work practices and quality control., • Performs routine preventative maintenance., • Follows company and OSHA safety rules and guidelines. Avoids injuries and damage to property, loss of unused materials and clean-up of work area debris., • Manages customer relationships to boost customer retention and satisfaction., • Provides information and recommends services to the sales team., • Completes all necessary company training in a timely manner., • Strong customer service; professionalism, • Written and verbal communication, • Problem-solving; attention to detail, • Time management and organizational skills, • 1+ years of Technician (Preferred), • Be able to travel outside of the U.S, • Language Requirement: Fluent written and verbal in English and Spanish, • Must have a cell phone and reliable transportation Job Type: Full-time Schedule: • 8-hour shift Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance Work Location: In person

Job Description ABOUT INTERATLAS InterAtlas consists of InterAtlas Chemical Inc. and InterAtlas Logistics Inc., with operations in both Canada and the United States. We are headquartered in St Catharines, Ontario, Canada and have operations in Newark, NJ, and Istanbul, Turkey. InterAtlas Logistics handles 5000 containers annually, supported by 50+ employees, we are a small team with big ambitions. InterAtlas offers its employees a unique opportunity to learn, grow and fast-track their careers in a well-managed, well-established company, with strong values centered around Being Relevant. The name InterAtlas literally means “In Between Giants”, and to outsmart the giants it requires people with drive who like to develop and grow. Our culture is very dear to us, and we will go to great lengths to strengthen our culture with the right hires. ABOUT THE ROLE The Tank Steamer/Heater Technician is responsible for safely heating and/or steaming ISO tanks in accordance with customer requirements and company safety standards. This role supports operations by ensuring tanks reach specified temperatures and readiness for offloading and further processing. HOW YOU WILL MAKE A DIFFERENCE • Heat or steam ISO tanks to specified temperatures per customer requirements, • Monitor heating and steaming processes to ensure safe, efficient, and accurate temperature control, • Inspect tanks during and after heating to verify readiness, • Dry tanks as required using approved heating and ventilation methods, • Connect, operate, and disconnect steam lines, heating units, and related equipment, • Continuously monitor tanks for leaks, pressure issues, or unsafe conditions, • Follow hazardous materials (HAZMAT) handling procedures and site-specific safety protocols, • Complete required documentation, logs, and temperature records accurately, • Communicate equipment issues, safety concerns, or deviations to supervisors promptly, • Maintain a clean, organized, and safe work area, • Work rotating shifts, including nights, weekends, and overtime as required, • Adhere to all company safety policies and OSHA regulations., • High school diploma or GED required, • Prior experience in industrial, tank, terminal, chemical, or manufacturing environments preferred, • Experience with tank heating, steaming, drying, or maintenance strongly preferred, • Knowledge of hazardous materials handling is a plus, • Ability to follow written work orders, procedures, and safety instructions, • Strong attention to detail and situational awareness, • Ability to lift, push, or pull up to 50 lbs, • Company Paid Benefits: Medical, Dental, Vision & Life Insurance, • 401(k) with Company Match, • Paid holidays, sick days & vacation, • Employee Referral Bonus Program, • Benefit from a good work life balance, • Personal & professional growth opportunities QUALIFICATIONS THAT ARE IMPORTANT TO US WHAT WE CAN OFFER YOU

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. * Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. * Demonstrating a willingness to help others and be a team member * Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. * Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. * Provide voice of Customer feedback. * Through service and Customer relationships, build brand dedication. * Conduct travel and work in a safe manner, constantly learning new technology and soft skills. * Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. * Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: * Proficient verbal and written communication and Customer relation skills. * Able to interact and effectively communicate in person and over the phone with customer and co-workers. * Present a professional image. * Must be adaptable to changes and able to deal with change, delays, or general work-related issues. * Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. * Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). * Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. * Basic mechanical and logical solving skills are a must. * Rational decision making and problem-solving skills. Work Environment * Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: * Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: * We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution Tuition reimbursement * Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: * Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. * Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. * Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. * Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1440B, Newark NJ

Job Description We are seeking a hands-on Industrial Sewing Machine Technician / Operations Manager to join our team. This role is ideal for someone with strong experience in sewing machine repair, parts, and maintenance, along with the ability to oversee daily production operations. This is a critical role supporting production efficiency, machine uptime, and overall operational performance. Key Responsibilities • Troubleshoot, repair, and maintain industrial sewing machines, • Diagnose mechanical issues including timing, motors, belts, and calibration, • Replace and manage sewing machine parts and components, • Perform preventive maintenance to minimize downtime, • Oversee daily production operations and workflow, • Supervise and support production staff as needed, • Coordinate parts inventory and sourcing, • Strong experience with industrial sewing machines (Juki, Brother, Consew, Pfaff, Singer, etc.), • Hands-on experience with machine repair and parts replacement, • Knowledge of sewing machine components and troubleshooting, • Background in manufacturing, textile, or sewing production environments, • Ability to manage both technical and operational responsibilities, • Competitive hourly or salary (based on experience) If you have hands-on experience with sewing machine repair, maintenance, and parts, we’d love to connect.

About the Role: The CNC Programmer and Set Up Technician is a skilled manufacturing role responsible for programming, setting up, and optimizing CNC machining processes for precision components in a regulated manufacturing environment.

Job Description Laboratory Technician Title: Laboratory Technician Location: Secaucus, NJ Reports to: Laboratory Manager Fulltime Frontage Laboratories Inc. is an award winning, publicly listed (HKSE), full-service CRO/Contract Research Organization operating over 25 state-of-the-art laboratories across the US, Canada and China, and growing over 30% YOY. Our core competencies include drug metabolism, pharmacokinetics/ pharmacodynamics (PK/PD), safety and toxicology, bioanalytical services, chemistry and manufacturing controls for drug development, and core laboratory services for clinical trials. Position/Job Summary: The laboratory technician performs a variety of laboratory procedures as required by the study protocol. Laboratory technicians are responsible for assisting the Laboratory Manager, Principal Investigator, Clinical Research Coordinators, and other medical professionals in the preparation and handling of specimens, analyzing results, and maintaining laboratory equipment. Laboratory Technicians ensure accuracy, quality control, and adherence to safety protocols, contributing directly to scientific research, development of new products, or medical diagnostics. Roles & Responsibilities: • Performs routine laboratory procedures including specimen labeling, collection, processing, and shipping in accordance with established SOPs and/or study protocol under the supervision of the Laboratory Manager, Clinical Research Coordinator, Principal Investigator, and Sub-Investigators., • Operate and maintain laboratory equipment such as centrifuges, pipettes, and refrigerators/freezers., • Develop a strong working knowledge of the study protocols and flow chart of study procedures and implement study procedures in full compliance with protocol requirements., • Maintain accurate and timely documentation in laboratory or study-specific documents, temperature logs, and shipping logs., • Perform environmental monitoring and equipment temperature checks to ensure proper specimen storage conditions., • Assist with inventory management, restocking supplies, and maintaining organized work areas., • Ensure compliance with safety, quality, and regulatory standards (GCP and internal QA procedures)., • Support weekend and surge workload coverage as needed based on operational demands., • Assist Laboratory Manager in any task as needed. Education, Experience & Skills Required: • Associate or BS in biology, chemistry, or related area, or completion and certification of Lab Technician course from an accredited or allied health training school., • 1 year of experience in clinical research laboratory or related medical field., • Proficiency in laboratory techniques and laboratory equipment operation., • Good communication skills. Benefits: • 401k Employer Match with immediate vesting, • Vision Insurance, • Medical and Dental Insurance with multiple coverage options, • FSA (Medical, Dependent Care, and Commuter), • Short Term Disability, • Long Term Disability, • Life Insurance, • Generous Paid Holidays and PTO Frontage Laboratories Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

As a Lead Ground Maintenance Technician (GMT) in a stationary role, you will join Delta’s Ground Support Equipment team, where you will lead and supervise a group of Stationary Ground Maintenance Technicians (GMT) Stationary Ground Maintenance Mechanics (GMM) and Maintenance Utility 1 Employees (M

Walmart is expanding its massive workforce, and American Career Guide is here to help you explore available roles at the retail giant.Positions are open across multiple departments, offering career paths for both entry-level talent and experienced professionals.Join the Walmart team and help provide

As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta’s Ground Support Equipment team. External Applicants Only – Ground Maintenance Technician (Stationary) hired to work at the JFK airport receive a $5,000 sign-on bonus.

Aerotek - - Responsibilities: Install, maintain, and repair machinery and mechanical equipment.Visually inspect operating machines and equipment for conformance with operational standards.Troubleshoot mechanical, hydraulic, and pneumatic systems.Dismantle defective machines and equipment and instal

As a Ground Maintenance Technician (GMT) in a stationary role, you will be a part of Delta’s Ground Support Equipment team. External Applicants Only – Ground Maintenance Technician (Stationary) hired to work at the LGA airport receive a $5,000 sign-on bonus.