Manufacturing technician jobs in Vancouver, WashingtonCreate job alerts

Job Description Description: Temp to Hire 4/10 Work Schedule (Mon - Thurs) 6am - 4:30pm Pay rate range: $25 - $27/hr FAA QUALITY INSPECTOR 2 (FAA SAFETY SENSITIVE) - 2-3 years in an electronic manufacturing environment - FINAL INSPECTION EXPERIENCE NEEDED JOB SUMMARY With minimum supervision, performs required measurements and data collection of all purchased and final Materials requiring inspection. Communicates nonconforming results to OECO Engineering, Manufacturing and Quality Assurance. Assists with First Article inspections, assists with Customer Source Inspection, and when applicable, will be certified as Designated Quality Representative for applicable customers. Additional FAA screening may be required. If hired into the position Technician will be performing, ready to perform, or eligible to perform safety-sensitive work and therefore will be part of the OECO LLC Drug and Alcohol Testing Program. The Program includes random, reasonable suspicion, and post-accident testing. ESSENTIAL FUNCTIONS Hand measuring tools - micrometers, calipers, gauges (height/thread/depth/pin), rulers, optical comparator, surface plate with related accessories including V-block, angles, parallels, squares, clamps, etc.; weights and scales; microscope, various special inspection tools and fixtures, coordinate measuring machine, profilometer Test equipment - curve tracer, video bridge and multimeters Office equipment - calculator, copy machine, computer terminals, printers, scanners, fax machines General Operations Performed: • Confirms information on accompanying paperwork, • Set up and perform complex measurements (electrical and mechanical) to verify that materials meet all parameters as called out by the latest inspection characteristics., • Inspect parts for conformance with detail drawings, assembly drawings, military standards and general standards of workmanship., • Performs visual inspections of soldered connections, of machined, coated, and plated surfaces, and other parts for nicks, scratches, or other general damage., • Interpret drawings, specifications, and purchasing requirements., • Segregate and report non-conforming material using a Quality Notification (QN) process., • Provide OECO Engineering, Manufacturing, and Quality Assurance with measurement results and data to aid in disposition of discrepant material., • Maintain accurate files, records and logs., • Supports and participates in internal and customer audits., • Train other inspectors as directed. QUALIFICATIONS Education: Requires a High School diploma or GED. A Certified Quality Technician (CRT) certificate or other certificates from a recognized organization is a plus. Strong math skills required. Blueprint reading and GD&T classes recommended. Experience: A minimum three to five (3-5) years of inspection experience or other quality related fields is required. Must have knowledge of assembly drawings, parts lists, revisions, workmanship standards, standard inspection procedures, work instructions, and wiring diagrams. • General Dimensioning and Tolerancing (GD&T) and CMM experience a plus., • Must be able to communicate verbally in person and in writing to individuals and/or groups., • Must have the ability to communicate with a variety of personality types and levels of the organization., • Must be able to lift 25-50 pounds several times per day.

Job DescriptionTest Technician – Aerospace Hiring ASAP – Day & Swing Shift Openings Description A global aerospace manufacturer is seeking Test Technicians to support testing of electrical power supplies and magnetic components. You will perform basic electrical tests, follow written procedures, record data, and work with equipment such as oscilloscopes and ohm meters. Rapid interview process available Skills (Experience in ANY is great) • Electronic/electrical testing, • Reading instructions or basic schematics, • Oscilloscopes, meters, or test equipment, • DCR, Hipot, Inductance, Insulation Resistance, Core Loss, Output Voltage., • Data entry and computer use Swing: 11am–9pm (Mon–Fri) Why Work Here? • Stable, long‑term aerospace company, • Clean, quiet, organized environment, • Full benefits upon direct hire Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Milwaukie,OR. Application Deadline This position is anticipated to close on Apr 3, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Manufacturing Technician Lead Solarcore is an advanced materials technology company that develops the most scientifically innovative thermal solutions on the planet. We are on a mission to solve the world’s largest thermal efficiency problems by revolutionizing the antiquated world of thermal insulation. The Manufacturing Technician Lead supports day-to-day operation of a first-of-its-kind advanced materials pilot manufacturing line. This role is responsible for equipment operation, raw material preparation, in-process monitoring, and maintaining a safe and organized production environment. As part of a small startup team, this position requires strong mechanical aptitude, attention to detail, and the ability to work hands-on in a fast-paced pilot-scale manufacturing setting. Pay range: $31.25 - $33.65 per hour Key Responsibilities Pilot Line Operation · Operate pilot-scale manufacturing equipment according to established procedures and process parameters. · Monitor process conditions and adjust equipment within defined operating limits. · Perform equipment start-up, shutdown, and changeovers. · Identify and escalate process deviations or equipment issues. · Support commissioning and process improvement activities. Raw Material Preparation · Prepare, measure, stage, and handle raw materials in accordance with production requirements. · Follow batch instructions, formulations, and material handling procedures. · Maintain accurate material usage and inventory records. · Ensure proper storage, labeling, and traceability of materials. Quality & Documentation · Record production data accurately and completely. · Perform in-process inspections and basic quality checks. · Follow SOPs and work instructions to ensure consistent product output. · Assist with process documentation and continuous improvement initiatives. Equipment & Facility Support · Perform basic preventive maintenance tasks and cleaning activities. · Maintain clean and organized production and storage areas (5S). · Support troubleshooting efforts alongside engineering staff. · Follow all safety procedures, including proper PPE and material handling requirements. Education and Qualifications · High school diploma or equivalent; technical or vocational training highly preferred. · 2–5 years of experience as a maintenance technician in a manufacturing or industrial environment. · Experience with mechanical, electrical, pneumatic, and hydraulic systems. · Experience working with chemicals a plus. · Ability to lift materials and stand for extended periods as required. · Hands-on, proactive, and adaptable · Comfortable working in evolving processes · Strong team mindset · Willingness to take ownership and learn new equipment

JOB SUMMARY With minimum supervision, performs required measurements and data collection of all purchased and final Materials requiring inspection. Communicates nonconforming results to OECO Engineering, Manufacturing and Quality Assurance. Assists with First Article inspections, assists with Customer Source Inspection, and when applicable, will be certified as Designated Quality Representative for applicable customers. Additional FAA screening may be required. If hired into the position Technician will be performing, ready to perform, or eligible to perform safety-sensitive work and therefore will be part of the OECO LLC Drug and Alcohol Testing Program. The Program includes random, reasonable suspicion, and post-accident testing. ESSENTIAL FUNCTIONS Hand measuring tools - micrometers, calipers, gauges (height/thread/depth/pin), rulers, optical comparator, surface plate with related accessories including V-block, angles, parallels, squares, clamps, etc.; weights and scales; microscope, various special inspection tools and fixtures, coordinate measuring machine, profilometer Test equipment - curve tracer, video bridge and multimeters Office equipment - calculator, copy machine, computer terminals, printers, scanners, fax machines General Operations Performed: • Confirms information on accompanying paperwork, • Set up and perform complex measurements (electrical and mechanical) to verify that materials meet all parameters as called out by the latest inspection characteristics., • Inspect parts for conformance with detail drawings, assembly drawings, military standards and general standards of workmanship., • Performs visual inspections of soldered connections, of machined, coated, and plated surfaces, and other parts for nicks, scratches, or other general damage., • Interpret drawings, specifications, and purchasing requirements., • Segregate and report non-conforming material using a Quality Notification (QN) process. * Provide OECO Engineering, Manufacturing, and Quality Assurance with measurement results and data to aid in disposition of discrepant material., • Maintain accurate files, records and logs., • Supports and participates in internal and customer audits., • Train other inspectors as directed. QUALIFICATIONS Education: Requires a High School diploma or GED. A Certified Quality Technician (CRT) certificate or other certificates from a recognized organization is a plus. Strong math skills required. Blueprint reading and GD&T classes recommended. Experience: A minimum two to five (2-5) years of inspection experience or other quality related fields is required. Must have knowledge of assembly drawings, parts lists, revisions, workmanship standards, standard inspection procedures, work instructions, and wiring diagrams. • General Dimensioning and Tolerancing (GD&T) and CMM experience a plus., • Must be able to communicate verbally in person and in writing to individuals and/or groups., • Must have the ability to communicate with a variety of personality types and levels of the organization., • Must be able to lift 25-50 pounds several times per day.

Company Description High Desert Flower Inc. is a rapidly growing, vertically integrated cannabis company built to lead in every part of the industry. With a strong foundation in cultivation, manufacturing, retail, and brand development, Role Description This is a full-time, on-site role for a Dispensary Technician/Budtender located in Portland, OR. The Dispensary Technician will be responsible for assisting customers, managing dispensary inventory, handling cash transactions accurately, and maintaining detailed product knowledge to provide recommendations and answer customer inquiries effectively. Additional responsibilities may include ensuring compliance with applicable regulations and maintaining a clean and organized work environment. Qualifications • Solid understanding of product knowledge, including the capability to learn and provide accurate details about products and their uses, • Strong communication and customer service skills to engage professionally with a diverse customer base, • Experience in accurate cash handling and the ability to manage point-of-sale systems efficiently, • Attention to detail, dependability, and ability to work in a fast-paced environment, • Familiarity with local laws and regulations related to dispensary operations is a plus, • High school diploma or equivalent; additional certifications or training relevant to the role are advantageous

Job Description We are currently seeking a skilled maintenance tech to join our team in the Portland area. A successful candidate will bring a strong mechanical and electrical background, excellent communication skills, eagerness to move into a higher-level position, and experience in a manufacturing plant. Our company offer a competitive comp plan, favorable benefits, opportunities for advancement, and strong leadership. POSITION - Maintenance Technician LOCATION - Portland, OR HOURLY RATE - $25-$28 per hour or more- Plus $1.50 per hour for SD - Hourly rate is based on experience. EXPERIENCE - 2 years or more of experience as a maintenance tech in a manufacturing or distribution plant SHIFT - Weekend Days - 5am - 5pm - Friday - Sunday INDUSTRIAL MAINTENANCE TECHNICIAN Milgard Windows is looking for hardworking, dependable, experienced maintenance technician to join our manufacturing team on the Day Shift. Ideal Candidates with electrical and mechanical & troubleshooting skills. Basic PLC knowledge and computer-based machine experience preferred. -Must have experience with automation or a maintenance tech in an automated facility. If you take pride in what you do and have a desire to tackle new challenges, then we have an opportunity for you! Flexible Paid Time Off, Company Matched 401(k), Tuition Reimbursement, Comprehensive Benefit Package including Company-Funded Health Savings Account & Eight Paid Holidays! Come Grow with Us! We offer cross training and opportunities for career growth. We encourage our team members to take on new roles, advance their careers and offer tuition reimbursement. Team member health and safety are top priorities. MI has enhanced safety protocols in place to promote a healthy work environment. Why work at MITER? DUTIES AND RESPONSIBILITIES: • Perform all work in a safe manner following all company safety policies and procedures, • Maintain, troubleshoot, perform preventative maintenance, and repair equipment in assigned area under the guidance of higher-level utility mechanics, • Maintain open and accurate communication with other maintenance employees as well as supervisor, • Complete all assigned work orders completely and accurately, documenting all prudent information describing the completion of the work order, • Complete Maintenance, Repair, and Operations documentation and Proteus entry as dictated by maintenance tasks, repairs, and preventative maintenance tasks, • Perform technical maintenance tasks under close supervision, • Provide all information necessary to maintain proper parts inventories, • Work with outside contractors to complete projects and improvements whenever possible, • Technical or Trade school degree preferred, or a combination of a High School Diploma or G.E.D. plus 4 years of experience in a maintenance occupation in a manufacturing environment, • Basic understanding of industrial electricity, • Working knowledge of energy sources for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.). PLC experience a plus, • Ability to maintain plant utilities (lighting, water systems, drain systems, etc.), • Ability to work independently when directed, • Basic understanding of schematics and blue prints, • Basic understanding of various diagnostic equipment including but not limited to ohms meters, voltage meters, etc. Basic knowledge and understanding of power equipment including cut-off saws, demo-saws, drills, etc., • Thoroughly understand and follow all OSHA and company regulations as they relate to the maintenance field (Lock Out Tag Out, Personal Protective Equipment, etc.), • Basic understanding of critical Maintenance, Repair, and Operations, and Proteus procedures and requirements, • Strong written and verbal communication skills • Medical plans with PPO options, • Prescription, • Dental, • Vision, • Company Paid Life Insurance, • Voluntary Life Insurance, • Supplemental Hospital Indemnity, Critical Illness, and Accident Insurances, • Company paid Short-Term Disability, • Company paid Long-Term Disability, • Paid time off (PTO), including Vacation, Personal, and 8 paid Holidays, • 401k retirement plan with company match, • Employee Assistance Program, • Teladoc, • Tuition Reimbursement, • Yearly Wellness Clinic MITER Brands, also known as MI Windows and Doors, Milgard and PGT are an equal-opportunity employer. The company does not discriminate based on religion, race, creed, color, national origin, sex, age, disability, handicap, veteran status, sexual orientation, genetic information, or any other applicable legally protected category. Company DescriptionMITER Brands TM is a residential window and door manufacturer that provides a leading portfolio of window and door brands for the new construction and replacement segments, also known as Milgard, MI Windows & Doors, and PGTI. MITER Brands is one of the largest suppliers of precision-built and energy-efficient windows and doors, with more than 10 manufacturing facilities throughout the United States servicing thousands of dealers. More than the name of a parent company, MITER Brands establishes a way of doing business. With optimized manufacturing, valued relationships, and dedicated team members coast to coast, MITER Brands instills confidence and drives quality customer experiences with an owner-operated, family-first approach.MITER Brands TM is a residential window and door manufacturer that provides a leading portfolio of window and door brands for the new construction and replacement segments, also known as Milgard, MI Windows & Doors, and PGTI. MITER Brands is one of the largest suppliers of precision-built and energy-efficient windows and doors, with more than 10 manufacturing facilities throughout the United States servicing thousands of dealers. More than the name of a parent company, MITER Brands establishes a way of doing business. With optimized manufacturing, valued relationships, and dedicated team members coast to coast, MITER Brands instills confidence and drives quality customer experiences with an owner-operated, family-first approach.

Job Description We are currently seeking a skilled maintenance tech to join our team in Portland, OR. A successful candidate will bring a strong mechanical and electrical background, excellent communication skills, eagerness to move into a higher-level position, and experience in a manufacturing plant. Our company offer a competitive comp plan, favorable benefits, opportunities for advancement, and strong leadership. POSITION - Senior Maintenance Technician LOCATION - Portland, OR HOURLY RATE - $30.00 - $36.00 per hour - Rate is based on technical skills EXPERIENCE - 7 years or more of experience as a maintenance tech in a manufacturing plant SHIFT - Days - 1st Shift - M-F 5am to 3pm Milgard Manufacturing is looking for hardworking, dependable, experienced maintenance technician to join our manufacturing team on the 1st Shift. Ideal Candidates with strong Mechanical and Electrical Experience; basic troubleshooting skills. Must have experience working in a manufacturing or distribution plant. If you take pride in what you do and have a desire to tackle new challenges, then we have an opportunity for you! Flexible Paid Time Off, Company Matched 401(k), Tuition Reimbursement, Comprehensive Benefit Package including Company-Funded Health Savings Account & Eight Paid Holidays! Come Grow with Us! We offer cross training and opportunities for career growth. We encourage our team members to take on new roles, advance their careers and offer tuition reimbursement. Team member health and safety are top priorities. MI has enhanced safety protocols in place to promote a healthy work environment. Why work at MITER? DUTIES AND RESPONSIBILITIES: • Perform all work in a safe manner following all company safety policies and procedures, • Maintain, troubleshoot, perform preventative maintenance, and repair equipment in assigned area under the guidance of higher-level utility mechanics, • Maintain open and accurate communication with other maintenance employees as well as supervisor, • Complete all assigned work orders completely and accurately, documenting all prudent information describing the completion of the work order, • Complete Maintenance, Repair, and Operations documentation and Proteus entry as dictated by maintenance tasks, repairs, and preventative maintenance tasks, • Perform technical maintenance tasks under close supervision, • Provide all information necessary to maintain proper parts inventories, • Work with outside contractors to complete projects and improvements whenever possible, • Technical or Trade school degree preferred, or a combination of a High School Diploma or G.E.D. plus 2 years of experience in a maintenance occupation in a manufacturing environment, • Basic understanding of industrial electricity, • Working knowledge of energy sources for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.). PLC experience a plus, • Ability to maintain plant utilities (lighting, water systems, drain systems, etc.), • Ability to work independently when directed, • Basic understanding of schematics and blue prints, • Basic understanding of various diagnostic equipment including but not limited to ohms meters, voltage meters, etc. Basic knowledge and understanding of power equipment including cut-off saws, demo-saws, drills, etc., • Thoroughly understand and follow all OSHA and company regulations as they relate to the maintenance field (Lock Out Tag Out, Personal Protective Equipment, etc.), • Basic understanding of critical Maintenance, Repair, and Operations, and Proteus procedures and requirements, • Strong written and verbal communication skills, • Medical plans with PPO and HSA options • Prescription, • Dental, • Vision, • Company Paid Life Insurance, • Voluntary Life Insurance, • Supplemental Hospital Indemnity, Critical Illness, and Accident Insurances, • Company paid Short-Term Disability, • Company paid Long-Term Disability, • Paid time off (PTO), including Vacation, Personal, and 8 paid Holidays, • 401k retirement plan with company match, • Employee Assistance Program, • Teladoc, • Tuition Reimbursement

Job Description Madden Industrial Craftsmen is seeking a Facilities Maintenance III for our client in Portland, OR. This is a direct hire position supporting building utilities and facility infrastructure. The ideal candidate has hands-on experience with the following: independent decision-making, strong mechanical and electrical fundamentals, diagnosing root causes and performing lasting repairs while confidently determining when systems are production-ready. Pay & Schedule Pay: $38?$41/hour DOE Training: Day shift during initial training period (length dependent on progress) Regular Shift: 3:00pm?11:30pm, Monday?Friday On-Call: Participation in on-call rotation required after training Position Type: Direct Hire Key Responsibilities ? Perform preventative maintenance and repairs on facility systems including commercial HVAC units, rooftop exhaust fans, boilers, air compressors, nitrogen systems, pumps, and water systems ? Troubleshoot mechanical and electrical issues affecting building utilities and infrastructure ? Support ultrapure water systems and related utility infrastructure through inspections and maintenance activities ? Serve as the primary facilities technician on swing shift after training ? Make independent decisions regarding equipment readiness and production impact ? Manage and oversee third-party contractors performing work on site ? Use CMMS to track, complete, and improve preventative maintenance tasks ? Coordinate with production and facility teams to minimize operational disruptions ? Follow all safety requirements, including PPE and regulated work practices Required Qualifications ? High School Diploma or equivalent ? Associate degree in Electrical or Maintenance Technology, technical certification, or equivalent experience ? 8+ years of facilities or industrial maintenance experience ? Strong mechanical aptitude and electrical troubleshooting fundamentals ? Experience supporting commercial HVAC, boilers, pumps, compressed air, and facility utility systems ? Demonstrated ability to work independently and make sound operational decisions ? Experience overseeing contractors or coordinating outside service providers ? Ability to obtain Hazardous Materials Technician certification and wear required PPE including respirator ? Ability to lift up to 50 lbs and work in industrial environments Preferred Qualifications ? Experience working in semiconductor, chemical, or high-tech manufacturing environments ? Exposure to control systems and facility automation (troubleshooting level) ? Experience with ultrapure water systems ? Experience working in clean room environments Benefits ? Medical ? Paid Sick Leave ? Paid Holidays ? 401(k) with Company Match Work Environment This role supports building and facility infrastructure within a high-tech manufacturing environment. Work includes maintenance of rooftop equipment, mechanical rooms, and utility systems. After training, the technician will be the primary facilities maintenance support on swing shift, with backup support available as needed. Work may include occasional clean room and chemical exposure. PPE and safety compliance are required at all times. #ZR

Job Description We are currently seeking a skilled maintenance tech to join our team in Portland, OR. A successful candidate will bring a strong mechanical and electrical background, excellent communication skills, eagerness to move into a higher-level position, and experience in a manufacturing plant. Our company offer a competitive comp plan, favorable benefits, opportunities for advancement, and strong leadership. POSITION - Maintenance Technician LOCATION - Portland, OR HOURLY RATE - $25.00 - $28.00 per hour - Plus $1.50 per hour for SD EXPERIENCE - 2 years or more of experience as a maintenance tech in a manufacturing plant SHIFT - 2nd Shift - 4pm to 12:30pm - $1.50 per hour for SD Milgard Manufacturing is looking for hardworking, dependable, experienced maintenance technician to join our manufacturing team on the 1st Shift. Ideal Candidates with strong Mechanical and Electrical Experience; basic troubleshooting skills. Must have experience working in a manufacturing or distribution plant. If you take pride in what you do and have a desire to tackle new challenges, then we have an opportunity for you! Flexible Paid Time Off, Company Matched 401(k), Tuition Reimbursement, Comprehensive Benefit Package including Company-Funded Health Savings Account & Eight Paid Holidays! Come Grow with Us! We offer cross training and opportunities for career growth. We encourage our team members to take on new roles, advance their careers and offer tuition reimbursement. Team member health and safety are top priorities. MI has enhanced safety protocols in place to promote a healthy work environment. Why work at MITER? DUTIES AND RESPONSIBILITIES: • Perform all work in a safe manner following all company safety policies and procedures, • Maintain, troubleshoot, perform preventative maintenance, and repair equipment in assigned area under the guidance of higher-level utility mechanics, • Maintain open and accurate communication with other maintenance employees as well as supervisor, • Complete all assigned work orders completely and accurately, documenting all prudent information describing the completion of the work order, • Complete Maintenance, Repair, and Operations documentation and Proteus entry as dictated by maintenance tasks, repairs, and preventative maintenance tasks, • Perform technical maintenance tasks under close supervision, • Provide all information necessary to maintain proper parts inventories, • Work with outside contractors to complete projects and improvements whenever possible, • Technical or Trade school degree preferred, or a combination of a High School Diploma or G.E.D. plus 2 years of experience in a maintenance occupation in a manufacturing environment, • Basic understanding of industrial electricity, • Working knowledge of energy sources for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.). PLC experience a plus, • Ability to maintain plant utilities (lighting, water systems, drain systems, etc.), • Ability to work independently when directed, • Basic understanding of schematics and blue prints, • Basic understanding of various diagnostic equipment including but not limited to ohms meters, voltage meters, etc. Basic knowledge and understanding of power equipment including cut-off saws, demo-saws, drills, etc., • Thoroughly understand and follow all OSHA and company regulations as they relate to the maintenance field (Lock Out Tag Out, Personal Protective Equipment, etc.), • Basic understanding of critical Maintenance, Repair, and Operations, and Proteus procedures and requirements, • Strong written and verbal communication skills, • Medical plans with PPO and HSA options • Prescription, • Dental, • Vision, • Company Paid Life Insurance, • Voluntary Life Insurance, • Supplemental Hospital Indemnity, Critical Illness, and Accident Insurances, • Company paid Short-Term Disability, • Company paid Long-Term Disability, • Paid time off (PTO), including Vacation, Personal, and 8 paid Holidays, • 401k retirement plan with company match, • Employee Assistance Program, • Teladoc, • Tuition Reimbursement

Job Description Division: 145 - SEA-SVC Position: Overhead Crane Technician Reports To: Branch Manager Employee Type: Full-time Pay Range: $25.00- $32.00 an hour Key Responsibilities and Accountabilities: • Troubleshoot, repair and inspect overhead cranes and hoists., • Perform scheduled preventive maintenance activities on equipment., • Support customers by effectively interfacing with customer and office in repairing equipment as needed., • Evaluate and make recommendations regarding required repairs for customers., • Maintain rapport with customers by examining complaints; identifying solutions; suggesting improved methods and techniques; and recommending system improvements., • Service overhead crane systems by performing quality installations; performing OSHA/ANSI equivalent inspections; documenting and completing warranty work; troubleshooting breakdowns; performing preventive maintenance; and responding to repair calls., • Document service and installation actions by completing forms, reports, and inspection checklist., • Builds and maintains customer confidence by maintaining good response time, informing customer of problems, and completing the job in a timely manner., • Maintain professional presentation, timeliness, appearance, and organization in all areas. Required Skills and Knowledge · 480v motor controls, electrical troubleshooting, and installation · Variable Frequency Drives, AC & DC brake circuits · Work at heights · Highly professional · Ability to work under pressure and deadlines · Ability to work independently. · Ability to work well with others. · Ability to fabricate and weld structures (structural welding only if certified). · Ability to perform inspections to OSHA/ANSI criteria · Ability to troubleshoot electrical circuits, single or three phase and AC or DC. · Ability to assemble and repair complex machinery. · Excellent communication skills. · Ability to work at heights. · Willingness to travel. · Safety oriented. · Maintain confidentiality. · Quality and results driven. · Good driving record. · Ability to drive a service truck with a trailer. · Ability to drive in in-climate weather including but not limited to rain, sleet, snow, high wind, and icy conditions. · Ability to drive at night. · Ability to use hand tools, power tools...etc. · Ability to lay out column spacing for new installs. · Ability to work a flexible schedule, including overtime. Equipment used to perform job: Hand tools; power tools; lift equipment; material handling equipment; fabrication equipment, electrical meters and equipment, survey equipment; ear plugs; steel-toed shoes; gloves; safety glasses; lanyard; and body harness Company DescriptionAce Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.Ace Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.

Job Description We are currently seeking a skilled maintenance tech to join our team in Portland. A successful candidate will bring a strong mechanical and electrical background, excellent communication skills, eagerness to move into a higher-level position, and experience in a manufacturing plant. Our company offer a competitive comp plan, favorable benefits, opportunities for advancement, and strong leadership. POSITION - Commercial HVAC Technician LOCATION - Portland, OR HOURLY RATE - $30-38 per hour - Hourly rate is based on experience from the technical interview EXPERIENCE - 3 years or more of experience SHIFT - 1st Shift Milgard Windows is looking for hardworking, dependable, experienced maintenance technician to join our manufacturing team on the 2nd shift. Ideal Candidates with strong Mechanical and Electrical Experience; basic troubleshooting skills. Must have experience working in a manufacturing or distribution plant. If you take pride in what you do and have a desire to tackle new challenges, then we have an opportunity for you! Flexible Paid Time Off, Company Matched 401(k), Tuition Reimbursement, Comprehensive Benefit Package including Company-Funded Health Savings Account & Eight Paid Holidays! Come Grow with Us! We offer cross training and opportunities for career growth. We encourage our team members to take on new roles, advance their careers and offer tuition reimbursement. Team member health and safety are top priorities. MI has enhanced safety protocols in place to promote a healthy work environment. Why work at MITER? DUTIES AND RESPONSIBILITIES: • Perform all work in a safe manner following all company safety policies and procedures, • Maintain, troubleshoot, perform preventative maintenance, and repair equipment in assigned area under the guidance of higher-level utility mechanics, • Maintain open and accurate communication with other maintenance employees as well as supervisor, • Complete all assigned work orders completely and accurately, documenting all prudent information describing the completion of the work order, • Complete Maintenance, Repair, and Operations documentation and Proteus entry as dictated by maintenance tasks, repairs, and preventative maintenance tasks, • Perform technical maintenance tasks under close supervision, • Provide all information necessary to maintain proper parts inventories, • Work with outside contractors to complete projects and improvements whenever possible, • Technical or Trade school degree preferred, or a combination of a High School Diploma or G.E.D. plus 2 years of experience in a maintenance occupation in a manufacturing environment, • Basic understanding of industrial electricity, • Working knowledge of energy sources for each piece of utility equipment in assigned area (electric, hydraulic, and pneumatic, etc.). PLC experience a plus, • Ability to maintain plant utilities (lighting, water systems, drain systems, etc.), • Ability to work independently when directed, • Basic understanding of schematics and blue prints, • Basic understanding of various diagnostic equipment including but not limited to ohms meters, voltage meters, etc. Basic knowledge and understanding of power equipment including cut-off saws, demo-saws, drills, etc., • Thoroughly understand and follow all OSHA and company regulations as they relate to the maintenance field (Lock Out Tag Out, Personal Protective Equipment, etc.), • Basic understanding of critical Maintenance, Repair, and Operations, and Proteus procedures and requirements, • Strong written and verbal communication skills, • Medical plans with PPO and HSA options • Prescription, • Dental, • Vision, • Company Paid Life Insurance, • Voluntary Life Insurance, • Supplemental Hospital Indemnity, Critical Illness, and Accident Insurances, • Company paid Short-Term Disability, • Company paid Long-Term Disability, • Paid time off (PTO), including Vacation, Personal, and 8 paid Holidays, • 401k retirement plan with company match, • Employee Assistance Program, • Teladoc, • Tuition Reimbursement

DIVE IN TO A NEW CAREER WITH A LESLIE'S COMPANY: Oregon Hot Tub is Oregon’s largest and most established hot tub company—the #1 selling hot tub company in the Portland area since 1979. We became a part of Leslie's family in October 2019. Oregon Hot Tub has worked closely with Watkins Manufacturing, makers of the Hot Spring Spas, to establish itself as one of the premier Hot Spring Spa dealers in the country. Our team of affable and highly informed sales personnel is dedicated to ensuring that you acquire a hot tub or sauna that perfectly aligns with your preferences. Our team of certified technicians, water care specialists, and customer service representatives excel in providing unparalleled post-purchase assistance, setting a benchmark in the industry. Job Overview: As a Water Care Technician, you will ensure an exceptional experience for all owners of our hot tubs, swim spas, pools, saunas, and other quality products while providing outstanding support to our internal team. You’ll deliver proactive, elite service, troubleshoot and resolve issues efficiently, and uphold all safety policies and procedures. Pay Range: $18.00 - $20.00 /Hourly Compensation within range to be determined by the applicant’s education, experience, knowledge and skills, as well as internal equity and alignment with market data. Responsibilities: • Provide weekly and monthly spa and pool water care (training provided), • Perform water balancing and pool cleaning for a pre-assigned customer base, • Maintain and meet goals set by management, • Complete additional assigned duties as needed, • Stay current on training and certifications to repair hot tubs, swim spas, and saunas, • Work outdoors in all weather conditions (heat, cold, wind, humidity), • Load/unload and handle chemicals safely, • Troubleshoot and resolve issues proactively, • Minimum age: 21 years, • Valid driver’s license, • High school diploma or GED, • Strong attention to detail and willingness to learn, • Flexible schedule to meet business needs, • Dependable, motivated, and results-driven, • Mechanical, plumbing, or electrical skills preferred, • Excellent communication and customer service skills, • Ability to work in a fast-paced environment and collaborate with a team, • Able to lift 50 lbs and perform repetitive physical tasks, • Proficiency with Microsoft Office, Outlook, and multi-screen CRMs Leslie’s recognizes a critical component to our continued success is our people. Leslie’s is proud to have a culture of inclusion that seeks to celebrate and embrace the different backgrounds and perspectives that help drive our success and support team members in developing and growing with us. We aim to create a workplace where all team members feel welcomed and valued and inspire each other every day. #HTHiring Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description Enthim Industries LLC — Milwaukie, OR Full-Time | On-Site | Competitive Pay DOE | Start Immediately THE OPPORTUNITY Enthim Industries is a cryogenic equipment manufacturer based in Milwaukie, Oregon. We build the Titan 10L — a compact, turnkey liquid nitrogen production system — from raw components to finished, tested, and crated machines. We're looking for a hands-on assembly technician to join our production team and build these systems alongside our lead engineers. This is not a line job. You'll learn every subsystem and every step — we have detailed SOPs for every task, and you'll follow them while building real machines that ship to customers in healthcare, biotech, food processing, and marine applications worldwide. WHAT YOU'LL BE DOING — ACTUAL PRODUCTION TASKS These are the real tasks you'll perform, taken directly from our production standard operating procedures: • Remove caster wheels from Sumitomo CNA-11 helium compressors while keeping the unit upright (never tilt — warranty requirement), install rubber isolation mount feet, rig with ratchet straps to a stacker lift, and lower into the generator cabinet bay with a controlled 3-5% forward tilt to engage the mounting slots, • Mount power distribution modules and air compressors to the helium compressor lid — remove the lid, lay soundproofing material, separate the power module bottom plate, drill self-tapping screws through the plate into the lid, reassemble the frame, then drill and bolt the air compressor. The two components must not touch each other, • Hand-wind 12-rung copper coil heat exchangers from a full 50 ft spool of 1/4" soft copper tubing around a paint can mandrel clamped in a bench vise, then cut from the spool with a tube cutter and deburr both ends, • Wire and mount EMI filter / power modules to the compressor lid — terminate labeled conductors with ring terminals, route through spiral cable wrap to the control panel, • Assemble the electrical and pneumatic control board: wire the PLC, 4 sensor harnesses, 2 solenoids, fan hub, air compressor pigtails (3-pin and 2-pin female connectors), connect airlines from carb tank to vent valve, connect copper coil to Walker filter, mount all valves and tanks with self-tappers, • Install gaskets and adapter flanges on the LN2 dewar cold head port to add the gas inlet hole that the original tank flange is missing, • Install cable grommets (glued with super glue) and panel-mount RJ45 Ethernet connectors (threaded with locking ring) into the generator cabinet, • Perform final inspection: run the generator, leak-check all fittings, set carb tank regulator to 90 PSI, drain all LN2, clean interior with vacuum and alcohol, install wire track lids, insulate output lines, install door and ground strap, apply caution stickers, then crate in an EcoCrate with shrink wrap and straps for shipping WHAT WE'RE LOOKING FOR We'll train you on our specific equipment and SOPs — every task above has a detailed, photo-documented procedure you'll follow. What we need: • Comfortable with hand tools — wrenches, screwdrivers, drills, tube cutters, torque tools, tape measures, crimpers, • Able to read and follow written standard operating procedures step by step, • Physically able to lift 50+ lbs and assist with 100+ lb rigging operations (2-person lifts), • Careful and detail-oriented — precision cryogenic equipment, not rough construction, • Reliable, punctual, and self-motivated — small team, everyone matters, • Basic comfort with electrical work (wiring, terminals, crimps) or willingness to learn, • Basic comfort with drilling, tapping, and fastening into metal BONUS POINTS (NOT REQUIRED) • HVAC/R, refrigeration, or mechanical assembly experience, • Brazing, soldering copper, or working with pressurized gas systems, • Electrical panel wiring, PLC, or controls experience, • Reading engineering drawings, P&IDs, or wiring diagrams, • Forklift or stacker lift experience, • Any cryogenic, vacuum, or compressed gas experience, • Marine or shipboard equipment installation experience WHAT WE OFFER • Competitive hourly pay based on experience, • Hands-on training on every subsystem — you'll become a cryogenic equipment specialist following our complete SOP library, • Small, tight-knit team where your work directly impacts the product, • Opportunity to grow into a lead technician, field service, or commissioning role, • You'll build machines that produce liquid nitrogen for hospitals, labs, marine vessels, and manufacturers — your work matters ABOUT ENTHIM INDUSTRIES Enthim Industries LLC is a cryogenic equipment manufacturer based in Milwaukie, Oregon. We design and build liquid nitrogen generators and cryotherapy equipment, serving customers in healthcare, biotech, food & beverage, agriculture, marine, and industrial gas applications across the US and globally. We are a growing company and this is a ground-floor opportunity to build something with us. No formal resume required — if you've got the skills and the drive, tell us about yourself and what you've built or worked on. We're more interested in what you can do than what's on paper. Location: Milwaukie, OR | On-Site | Full-Time Enthim Industries LLC | Milwaukie, Oregon Company DescriptionAt Enthim Industries, we’re redefining the future of cold. As a leader in cryogenic and refrigeration manufacturing, we specialize in advanced, high-performance systems engineered for safety, efficiency, and results. From elite sports recovery to medical and wellness applications, our machines are at the forefront of innovation. We’re growing—and we’re looking for hands-on talent ready to help shape the next generation of cold technology.At Enthim Industries, we’re redefining the future of cold. As a leader in cryogenic and refrigeration manufacturing, we specialize in advanced, high-performance systems engineered for safety, efficiency, and results. From elite sports recovery to medical and wellness applications, our machines are at the forefront of innovation. We’re growing—and we’re looking for hands-on talent ready to help shape the next generation of cold technology.

Job Description Instrumentors Supply Inc., is a dynamic provider of process control and automation solutions, is seeking a highly motivated salesperson based in the Oregon or Washington state, who will help in the development of our US Sales. We are focused on providing our professionals with opportunities for leadership and career advancement. Our company’s mission is to provide the best process control, automation and data acquisition solutions to the manufacturing industries located in the USA resulting in the improvement of our customers’ productivity and the reduction of their operating costs. In collaboration with our channel partners, these solutions are provided with honesty and integrity. To be more than a provider but a partner who contributes to the success of our customers. Job Duties & Responsibilities: The ideal candidate will be responsible for providing technical support to our customers, selling and promoting instrumentation and automation solutions with focus on temperature-related products and on our proprietary product lines such as our magnetic connector, the Magna-Plug, our ThermalTrace wireless data acquisition system for the food industry and our custom-made pH electrodes for meat. A complete list of products and services we offer are detailed on our web site at . We are looking for an individual with passion for selling technology with a forward-thinking approach to successful long-term business relationships. Establish key customer contacts and build strategic relationships. Understand new technology requirements and guide the organization to identify future growth possibilities by either expanding our current portfolio and/or customer markets. This position will report directly to upper management and will have the opportunity of accelerating growth within the company. You will be responsible for providing complete and appropriate solutions for every customer to boost top-line revenue growth and profitability. Our ideal candidate should ensure client satisfaction while increasing new customer acquisitions, upselling, and cross-selling, and overall business success. Prepare monthly, quarterly, and annual reports and forecasts. Establish, develop, and maintain positive business and customer relationships. Desired Qualifications: Electrical or automation engineer or experienced technician Basic knowledge of computers and IT networks Understanding of temperature applications Excellent communication skills and technical problem solving. Compensation & Benefits Offered: Competitive salary package Group insurance paid by the company Company sponsored retirement plan Full-time position. Equal opportunity employer. All applicants must be authorized to work in the U.S.

Job Description About Kanto Corporation Kanto is a U.S. leader in high-purity specialty chemicals, powering the world’s most advanced industries. With a proven legacy of precision, safety, and innovation, we partner with global leaders in semiconductors, technology, and chemical processing to deliver products that meet the most uncompromising standards of quality and reliability. At Kanto, our people are our greatest strength. Collaboration, commitment, and excellence define how we work, while continuous improvement drives both our success and employee growth. Joining Kanto means shaping the future of technology and manufacturing—while building your career in a dynamic, high-impact environment where your work truly matters. Bring Your Facilities Maintenance Experience to Kanto. Support and Drive Improvements. Kanto Corporation is seeking an experienced Facilities Maintenance Technician III for our high purity chemical manufacturing facility. The Facilities Maintenance Technician III works with other maintenance technicians and the engineering team to maintain, repair, and upgrade all plant equipment and facilities – machinery, equipment, physical structures, pipe, and electrical systems. Ensures that the equipment and systems are working properly, reliably, and efficiently while adhering to Kanto’s Operating Priorities of Safety, Quality, and Productivity. What You’ll Do • Performs all routine preventive maintenance (PM) orders as assigned and health checks on facility equipment, including water and wastewater treatment, scrubbers, HVAC, wiring, air compressors, boilers, nitrogen system, powered rigging equipment, etc. This includes preparation of preventative maintenance reports and recordkeeping, performing periodic checks of equipment performance and efficiency, conducting trend analysis of key operational indicators to determine optimum operation of systems and equipment, and troubleshooting equipment failures. Works with and oversees outside contractors as required., • Works with controls systems, troubleshooting, and correcting the issue causing the process to be down., • Uses the plants CMMS system to track and complete work assignments. Makes recommendations on ways to improve preventative maintenance tasks., • Works with Production and Process groups to coordinate work activities and minimize impacts to production. Work includes opening / closing of various valves and overall operations of equipment that impacts production and the facility systems., • Follows all applicable company and customer safety requirements, participates in the company safety committee and supports emergency responses., • Participates in annual maintenance assignments., • Requires occasional work in a clean room environment and around chemicals. What You Bring • High School Diploma or equivalent required., • AA as Electrical or Maintenance Technician or certification training from a college or technical school (or equivalent combination of education and experience)., • 10+ years of experience working as a facilities technician., • Advanced pipe fitting and carpentry skills and /or electrical skills., • Must have experience using basic hand and power tools and working with limited supervision., • Must acquire or be certified as a Hazardous Materials Technician as per 29 CFR 1910.120(q)(6)(iii), and wear personal protective equipment (PPE), including respirator, as required., • Experience with ultrapure water and high purity chemical systems preferred., • Ability to communicate effectively and read and interpret various documents., • Strong mathematical skills and reasoning ability., • Physical ability to lift up to 50 lbs., stand/walk for long periods and work in industrial environments. Why Join Kanto • Work in a high-tech, safety-first environment., • Opportunities to highlight your experience and knowledge., • Competitive pay, generous FTO, paid holidays, rich medical/dental benefits, job focused tuition/education reimbursement, etc., and career-long growth opportunities. Apply today to bring your expertise in facilities maintenance to Kanto. We’d love to learn more about you. Kanto Corporation is proud to be an Equal Opportunity Employer. We value the unique backgrounds, perspectives, and talents that each individual brings, and we are committed to fostering a workplace where everyone feels respected, included, and empowered to contribute to our shared success. 3:00pm-11:30 pm, Monday through Friday (with overtime and on-call as required)

Job Description Circuit Board Assembly Rework Technician Vancouver, WA $25/hr. Day Shift Job Description As a Rework Technician, you will utilize soldering equipment to rework components on circuit boards, test for electrical continuity, and inspect PCBs for conformance with IPC-A-610 standards. You will document quality issues and collaborate with the engineering group for escalated defects. Responsibilities • Utilize soldering equipment to rework components on circuit boards., • Test for electrical continuity., • Inspect PCBs for conformance with IPC-A-610 standards., • Proficient in soldering and reworking components on circuit boards., • Ability to identify components based on a drawing or electrical diagram., • Experience with lead-free solder, both surface mount and thru-hole., • Previous rework experience with a wide variety of board designs and layouts., • Ability to lift up to 25 lbs., • Proficient computer skills., • Experience working in an ERP system preferred. Join a healthy company culture that promotes relaxation, exercise, and healthy living with benefit discounts. Enjoy competitive pay and full medical benefits in a low turnover environment. We are committed to hiring long-term employees. Work Environment The work environment is a lean manufacturing setting that is clean, organized, bright, and fairly quiet, although some areas may have a paint-like smell. Employees may be required to lift up to 25 lbs. We are a leading electronics design and manufacturing provider in the Northwest, serving a range of industries from consumer products to highly technical fields such as Medical and Aviation/Space and Defense (ASD). Job Type & Location This is a Contract to Hire position based out of Vancouver, WA. Pay and Benefits The pay range for this position is $25.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Vancouver,WA. Application Deadline This position is anticipated to close on Apr 6, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Maintenance Technician Indepak, a division of Sinclair & Rush, Inc., is a custom thermoforming company known for precision, quality, and innovation in packaging solutions. We are driven by a strong team culture, employee longevity, and a commitment to continuous improvement. We are seeking a Level I or II Maintenance Technician to join our Day shift team. This is a great opportunity for an individual with a solid foundation in manufacturing maintenance who is looking to grow their skills and talents. Our current full-time opening is for DAY shift Monday-Thursday (10-hour shift) Incentives Offered: We offer a comprehensive and competitive benefits package designed to support both your professional growth and personal well-being. Starting from day one, you'll receive paid vacation, 40 hours of sick leave, and 80 hours of paid holidays, with additional options for vacation and sick time payouts. Our schedule also includes 3-day weekends to promote a healthy work-life balance. We provide a competitive salary along with a 401(k) featuring a company step match to help you plan for the future. Our health and wellness benefits include medical, dental, and vision coverage, as well as a Flexible Spending Account (FSA) and Health Reimbursement Account (HRA). Life insurance coverage is also included. To continue growth, we offer tuition reimbursement, giving you the opportunity to further your education and skills while working with us. Primary Responsibilities: As part of the maintenance team, responsibilities include performing preventive maintenance (PM), troubleshooting, and making repairs on production and facility equipment to ensure optimal performance and minimal downtime. The role also involves assisting with the installation and startup of new machinery and systems. Technicians are expected to diagnose and resolve mechanical, pneumatic, and hydraulic issues efficiently. Safe and effective use of hand and power tools is essential, along with accurately completing and documenting maintenance work orders, including logging equipment history. All tasks must be carried out in compliance with OSHA safety standards and the company's internal safety policies. Qualifications Include: The ideal candidate will have 2–5 years of experience in a manufacturing maintenance role, with a solid working knowledge of preventative maintenance systems, hydraulics and pneumatics, mechanical drive systems, valves, pumps, and basic electrical components. Proficiency in using standard hand and power tools is essential. Additional experience in machining, fabrication, welding, soldering, brazing, or pipefitting is a strong advantage. We are looking for someone who is detail-oriented, safety-conscious, and dependable, with strong communication skills and a collaborative, can-do attitude. A willingness to learn, grow, and adapt in a dynamic environment is highly valued.

Job Description *This position is located in Washougal, Washington Company Overview: Northwest Adhesives, Inc was recently acquired by The Willamette Valley Company and is a well-established industrial adhesive manufacturer with over 30 years of success in producing high-performance hot melt and water-based adhesives. We proudly serve the packaging, labeling, and product assembly industries and maintain a strong reputation for innovation, quality, and customer service. We are currently seeking a Maintenance Manager to join our site leadership team and oversee the maintenance and reliability of our production equipment and facility. Position Summary: The Maintenance Manager is responsible for managing all aspects of equipment maintenance, repair, and facility support to ensure continuous and efficient operation of manufacturing lines. This hands-on role requires strong mechanical aptitude, problem-solving abilities, and a proactive approach to preventive maintenance. The Maintenance Manager plays a key role in minimizing downtime, supporting process improvements, and leading internal and external resources related to maintenance and repairs. Key Responsibilities: • Keep all primary production equipment functioning., • Schedule and perform all routine and preventative maintenance repairs to equipment., • Arrange/coordinate outside contract work for facility maintenance., • Manage equipment installations, upgrades, and modifications in coordination with production goals., • Troubleshoot and repair mechanical, pneumatic, and low-voltage electrical systems., • Maintain accurate records of maintenance tasks, work orders, and parts inventory., • Ensure compliance with company safety policies, lockout/tagout procedures, and regulatory requirements., • Provide guidance to production staff on equipment care., • Demonstrate leadership for teamwork, respect all employees, and portray a positive attitude., • Assist in design, layout, or redesign of equipment and processes for efficiency improvements., • Provide on-call or emergency support as needed to minimize equipment downtime., • 5+ years of related experience in a maintenance technician or maintenance management role in a manufacturing environment., • Strong mechanical skills, including experience with pumps, motors, pneumatics, hydraulics, and basic electrical troubleshooting., • Ability to read blueprints, schematics, and technical manuals., • Excellent communication, organizational, and documentation skills., • Proficient with tools, measurement equipment, and basic fabrication., • Valid driver’s license and ability to travel for occasional off-site service work, • 1 to 2 years of welding and fabrication experience., • Experience working with hot melt adhesive systems or industrial process equipment., • Paid Holidays and Personal Time Off (PTO), • Excellent Health and Retirement Benefits, • Supplemental & Voluntary Insurance Options, • Full-time, Monday–Friday, • Occasional after-hours support required in emergency situations

Job DescriptionSalary: $24.00 - $26.00/hr. DOE Job Summary Cowlitz Clean Sweep (CCS) a Pacific Northern Environmental LLC division, is seeking an Industrial Cleaning Technician who thrives in a fast-paced, team environment and has the ability to provide exceptional service and skills to our company, clients, and employees. Pacific Northern Environmental, LLC consists of five divisions including Advanced Electrical Technologies (AET), Taurus Power and Controls (Taurus), Cowlitz Clean Sweep (CCS), Pacific Northern Environmental Construction (PNEC), and WasteXpress Environmental (WXE). Together, we specialize in commercial and petroleum construction, industrial and commercial electrical, industrial cleaning, and hazardous waste disposal. PNE LLC is a multi-state organization with operating offices in Washington, Oregon, Idaho, and Hawaii. In addition, we carry out projects across the United States. CCS provides industrial cleaning and spill response to almost every pulp and paper mill in the Pacific Northwest. We also service major oil companies and a wide range of manufacturing and industrial clients. CCS has demonstrated its ability to complete large and complex industrial cleaning challenges on schedule, within budget, and in compliance with the most stringent industrial health & safety programs. No industrial cleaning job is too large or too small for CCS. The responsibilities of an Industrial Cleaning Technician will vary depending on the specific job assignment. Responsibilities may include operating a vacuum ruck and handling hoses, performing hydro blasting with high-pressure water, cleaning tanks & entering confined spaces, etc. This role requires a strong team-oriented mindset and strict adherence to all safety protocols. Education and Experience Qualifications • High School Diploma or GED, • Must be 18 years or older., • Valid Drivers License and ability to be insured under company insurance plan required., • Minimum 2 years experience working in roles involving intensive physical activity, including repetitive heavy lifting (up to 50lbs), prolonged standing, bending, climbing, and working in a demanding physical environment for extended periods of time., • Regular on-call availability is required as part of this role. This may include nights, weekends, and holidays., • Required to meet facial hair standards in accordance with OSHAs Respiratory Protection Standard (29 CFR 1910.34). Duties and Responsibilities The Industrial Cleaning Technician possessing the education and experience listed above performs the following: • Safely operate and maintain company vehicles as required for job duties, ensuring compliance with all traffic laws and company policies, • Operation of different heavy duty work-related equipment, including but not limited to high pressure pumps, vacuum trucks, different industrial cleaning agents, etc., • Consistently wear and properly use required personal protective equipment (PPE) as necessary in accordance with all safety regulations and company policies., • Responsible for adherence to safety policies and procedures of both the company and the customer, in relations to but not limited to operations, safety, equipment, emergency response., • Inspect surface cleaned to ensure compliance with company and customer expectations., • Remain professional and represent the company well, great customer service required., • Works as a team participant along with maintenance staff to ensure the team meets quality standards set by company., • Test machinery and equipment as needed., • Maintains punctual, regular, and predictable attendance., • Remain up to date on all safety training and mill trainings, mostly completed on an annual basis., • Other duties as assigned. Working Conditions and Physical Requirements The candidate must possess and be adaptable to the following physical abilities and working conditions: • Work in outdoor weather conditions., • Willing to get dirty and be in wet conditions at times., • Frequently moving hoses and other work-related equipment up to 50lbs for various needs., • Observe details at close range., • Communicate information and ideas so others will understand. Must be able to exchange accurate information., • Ascend/descend ladders, stairs, scaffolding and/or platforms., • Travel up to 25%, some overnight travel may be required., • Work in environments where there may be exposure to potentially hazardous conditions, including chemicals, fumes, hazardous substances., • Perform duties in an industrial environment where consistently high noise levels are present., • Perform tasks that may involve working in confined spaces such as tanks, tunnels, or enclosed structures, as well as at elevated heights using ladders, platforms, or scaffolding. Employee Benefit Program Pacific Northern Environmental, LLC presently provides coverage for: • Medical, Dental & Vision options with low premiums for employees and eligible dependents, • Life AD&D - Voluntary and Company paid., • Specialty RX programs., • Group AFLAC options Hospital, Critical, Accident and short-term Disability Plans, • Pre-Tax Flexible Savings Account (FSA), • Pre-Tax Dependent Care Savings Account (DCSA), • Telehealth by Teladoc., • 401(k) with discretionary annual company matching contributions., • Employee Assistance Program (EAP), • Paid Trainings and Certifications, • Paid Time Off, • Paid Holiday for qualifying employees, • Up to $2,000 per year profit sharing for qualifying employees, • Annual company events, • Safety Incentives Please apply directly Pacific Northern Environmental, LLC is an Equal Opportunity Employer. Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. This job description is a general description of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees of Pacific Northern Environmental, LLC (PNE, LLC) are expected to perform tasks as assigned by PNE supervisory/management personnel, regardless of job title or routine job duties. This position has been determined as safety sensitive, as defined as a position wherein an accident could cause human life, serious bodily injury, or significant property or environmental damage and is therefore subject to pre-employment drug screening including that of THC. We are a Drug and Alcohol-Free Workplace. All new hires are subject to testing in accordance with local, federal, and state guidelines. #hiringnow

Job Description Legacy Talent Search is currently seeking candidates for a Maintenance Technician role in Vancouver, WA. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest quality products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their manufacturing process. Key Responsibilities: · Perform routine maintenance, troubleshooting, and repair on production and facility equipment to ensure safe and efficient operations. · Diagnose mechanical, electrical, pneumatic, and hydraulic issues and implement effective solutions to minimize downtime. · Conduct preventative maintenance according to established schedules and maintenance programs. · Install, modify, and upgrade machinery, equipment, and systems as needed to support production goals. · Maintain accurate maintenance logs, service records, and equipment documentation. · Respond promptly to equipment breakdowns and coordinate repairs to restore operations quickly. · Ensure compliance with safety standards, company policies, and regulatory requirements. · Work closely with production teams to identify improvement opportunities and support operational efficiency. · Maintain a clean and organized maintenance workspace and assist with facility upkeep as needed. · Report recurring equipment issues, safety concerns, or improvement opportunities to supervisors. Qualifications: · High school diploma or equivalent; technical training or certification in maintenance, industrial technology, or a related field is preferred. · Previous experience in industrial maintenance, manufacturing, or a similar environment preferred. · Strong mechanical aptitude and working knowledge of electrical, hydraulic, and pneumatic systems. · Ability to read and interpret technical manuals, schematics, and blueprints. · Ability to lift up to 50+ lbs and work in a fast-paced industrial environment. · Strong problem-solving skills and attention to detail. · Excellent teamwork, communication, and collaboration skills. · Flexibility to work varying shifts, including evenings or weekends, as required. What We Offer: · Competitive hourly wage. · Comprehensive benefits package, including health insurance and paid time off. · Opportunities for growth and advancement within the company. · A supportive and inclusive workplace culture. · The chance to contribute to a company that values quality, innovation, and continuous improvement. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community—how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

ABOUT US The Oregon City, OR site was established in 1973 and joined the Orchid team in 2012. Our 80,000 square foot facility employs approximately 300 team members. We specialize in hip and knee joint implants that enable our customers to live a longer active life. We are a full-service plant, meaning our team can manufacture medical implants from start to finish in-house. A career with Orchid provides growth opportunities, a great benefits package including performance bonuses, insurance, 401(k) with company match, and paid time off. For more information, please visit ___. SHIFT ORE - Shift 1 ($0) (United States of America - Oregon) A BRIEF OVERVIEW The Operations Technician I, Coating applies powders and binders to coat products and performs in-process inspections using calipers and/or comparators. WHAT YOU WILL DO * Use hand truck, pallet jack, carts and tables to safely transport product. * Maintain work area, tools and equipment in a clean and organized condition. * Detect report faulty equipment, defective material and any unusual conditions to the department Supervisor or Lead. * Follow designated safety rules and regulations. * Support Lean Manufacturing and EHS initiatives. * Dimensionally inspect work, using appropriate tools including, but not limited to; calipers, comparators, pin gauges, measuring instruments and surface plates, etc. as required. * Perform weekly housekeeping per 5S schedule. * Detect report faulty equipment, defective material and any unusual conditions to the department Supervisor or Lead. * Follow work orders to perform operations on various parts and products * Reinforces safety expectations. Ensures safety operating practices are demonstrated. Reports issues/concerns to Supervisor. * Support quality and compliance by adhering to all procedures, work instructions, and forms per the Quality Management Systems (QMS). * Completes all required training. * Prepare product surface for coating and mix coating powder and binder. * Perform coating operation by spraying binder on the product surface and applying coating powder using brushes and other hand tools. Repeat this process multiple times on each product to achieve specifications. * Inspect product per specifications visually and using calipers and/or a comparator. EDUCATION QUALIFICATIONS * High School Or Equivalent (Preferred) EXPERIENCE QUALIFICATIONS * No previous work experience required (Preferred) * Manufacturing Experience (Preferred) KNOWLEDGE & SKILLS THAT ENABLE SUCCESS * Quality Inspection Metrology Tools - Working Experience * Standard Operating Procedures - Working Experience * Quality Management - Basic Knowledge * Mathematical Ability - Basic Knowledge * Manufacturing Safety - Working Experience * Active Learning - Basic Knowledge * Information Capture - Working Experience * Hand Dexterity - Extensive Experience * Time management - Working Experience * Data Entry - Basic Knowledge * Communication - Basic Knowledge * Blueprint Reading - Basic Knowledge * Accuracy and Attention to Detail - Working Experience * Problem Solving - Working Experience PHYSICAL DEMANDS * Must be able to remain in a stationary position - Frequently * Must be able to move about the inside of the building - Occasionally * Must be able to move equipment around the building - Occasionally * Must be able to position oneself and move under/around/over equipment - Occasionally * Must be able to handle/adjust/inspect/position various items and equipment - Constantly * Must be able to communicate and exchange information with others - Frequently * Must be able to perform tasks that require repetitive handling/adjusting/inspecting/positioning of items and equipment - Constantly * Must be able to distinguish and detect information such as writing and defects - Frequently WORKING CONDITIONS * Noise - Occasionally WHAT WE OFFER * Opportunity to work in a growing company * Ability to help people live a longer, more active life * Comprehensive benefit package * Ability to work in an organization that values: * * Integrity First: We do the right thing * Teamwork: We are one Orchid * Results: Our results matter ADDITIONAL REQUIREMENTS * Candidates offered employment may be required to submit to a pre-employment background check and pre-employment drug-screening based on position requirements * Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time * Candidates must be able to provide proof of eligibility to work in the United States through eVerify At Orchid, we fully support a diverse and inclusive workplace and we are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, color, religion, sex, sexual orientation, gender identity, national origin, hair type, age, status as a protected veteran, or disability. Orchid Orthopedic Solutions only pays fees for solicited presentations of job seekers submitted through our preferred vendor job board by recruiters, employment agencies, or other parties.

ABOUT US The Oregon City, OR site was established in 1973 and joined the Orchid team in 2012. Our 80,000 square foot facility employs approximately 300 team members. We specialize in hip and knee joint implants that enable our customers to live a longer active life. We are a full-service plant, meaning our team can manufacture medical implants from start to finish in-house. A career with Orchid provides growth opportunities, a great benefits package including performance bonuses, insurance, 401(k) with company match, and paid time off. For more information, please visit ___. SHIFT ORE - Shift 2 ($.55) (United States of America - Oregon) A BRIEF OVERVIEW The Operations Technician I, Finishing performs various operations including but not limited to grinding, buffing, trimming, and chemical treatment on parts to achieve the required surface dimension and finish. WHAT YOU WILL DO * Operate auto and manual cleaning and passivation line. * Operate laser marking equipment. * Perform product cleaning and visual inspection. * Perform cleaning operations of castings using various sandblast equipment per tech card. * Inspect and maintain blast cabinets, media, nozzles and hoses in order to ensure proper cleaning. * Use conventional belting equipment for the specific belting operations based on the information on engineering drawings, ex. Fiber-wheel finish and/or Satin finish. * Use air and/or electric handheld tools for specific grinding, deburring, or detailing an area on a part that is usually confined or the inside diameter of a cylindrical part. * Select, align and secure holding fixtures, cutting tools, attachments, accessories and materials on machines. * Determine proper media to be used based on the information taken from the engineering drawings and/or the work instructions and the proper machine and machine settings. * Complete proper documentation as required including process routing card, salvage router and scrap forms. * Use hand truck, pallet jack, carts and tables to safely transport product. * Maintain work area, tools and equipment in a clean and organized condition. * Detect and report faulty equipment, defective material and any unusual conditions to the department Supervisor or Lead * Follow designated safety rules and regulations. * Support Lean Manufacturing and EHS initiatives. * Dimensionally inspect work, using appropriate tools including, but not limited to; calipers, comparators, pin gauges, measuring instruments and surface plates, etc. as required. * Perform weekly housekeeping per 5S schedule. * Follow work orders to perform operations on various parts and products * Reinforces safety expectations. Ensures safety operating practices are demonstrated. Reports issues/concerns to Supervisor. * Support quality and compliance by adhering to all procedures, work instructions, and forms per the Quality Management Systems (QMS). * Completes all required training. EDUCATION QUALIFICATIONS * High School Or Equivalent (Preferred) EXPERIENCE QUALIFICATIONS * No previous work experience required (Preferred) * Manufacturing Experience (Preferred) KNOWLEDGE & SKILLS THAT ENABLE SUCCESS * Problem Solving - Working Experience * Quality Inspection Metrology Tools - Working Experience * Standard Operating Procedures - Working Experience * Quality Management - Basic Knowledge * Mathematical Ability - Basic Knowledge * Manufacturing Safety - Working Experience * Active Learning - Basic Knowledge * Information Capture - Working Experience * Hand Dexterity - Extensive Experience * Time management - Working Experience * Data Entry - Basic Knowledge * Communication - Basic Knowledge * Blueprint Reading - Basic Knowledge * Accuracy and Attention to Detail - Working Experience PHYSICAL DEMANDS * Must be able to remain in a stationary position - Frequently * Must be able to move about the inside of the building - Frequently * Must be able to move equipment around the building - Frequently * Must be able to ascend/descend stairs or ladders - Occasionally * Must be able to position oneself and move under/around/over equipment - Occasionally * Must be able to handle/adjust/inspect/position various items and equipment - Frequently * Must be able to communicate and exchange information with others - Frequently * Must be able to perform tasks that require repetitive handling/adjusting/inspecting/positioning of items and equipment - Constantly * Must be able to distinguish and detect information such as writing and defects - Frequently * Must be able to move equipment - Frequently WORKING CONDITIONS * Noise - Occasionally WHAT WE OFFER * Opportunity to work in a growing company * Ability to help people live a longer, more active life * Comprehensive benefit package * Ability to work in an organization that values: * * Integrity First: We do the right thing * Teamwork: We are one Orchid * Results: Our results matter ADDITIONAL REQUIREMENTS * Candidates offered employment may be required to submit to a pre-employment background check and pre-employment drug-screening based on position requirements * Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time * Candidates must be able to provide proof of eligibility to work in the United States through eVerify At Orchid, we fully support a diverse and inclusive workplace and we are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, color, religion, sex, sexual orientation, gender identity, national origin, hair type, age, status as a protected veteran, or disability. Orchid Orthopedic Solutions only pays fees for solicited presentations of job seekers submitted through our preferred vendor job board by recruiters, employment agencies, or other parties.

ABOUT US The Oregon City, OR site was established in 1973 and joined the Orchid team in 2012. Our 80,000 square foot facility employs approximately 300 team members. We specialize in hip and knee joint implants that enable our customers to live a longer active life. We are a full-service plant, meaning our team can manufacture medical implants from start to finish in-house. A career with Orchid provides growth opportunities, a great benefits package including performance bonuses, insurance, 401(k) with company match, and paid time off. For more information, please visit ___. SHIFT ORE - Shift 2 ($.55) (United States of America - Oregon) A BRIEF OVERVIEW The Operations Technician I, Wax sets up dies and wax injection moldings for products and machines. Performs wax assembly processes including but not limited to using hand held torch, heating elements and tips, dental picks, abrasive cleaning pads, and, cleaning sticks and fluids. WHAT YOU WILL DO • Completes all required training., • Use hand truck, pallet jack, carts and tables to safely transport product., • Maintain work area, tools and equipment in a clean and organized condition., • Detect report faulty equipment, defective material and any unusual conditions to the department Supervisor or Lead., • Follow designated safety rules and regulations., • Support Lean Manufacturing and EHS initiatives., • Dimensionally inspect work, using appropriate tools including, but not limited to; calipers, comparators, pin gauges, measuring instruments and surface plates, etc. as required., • Perform weekly housekeeping per 5S schedule., • Detect report faulty equipment, defective material and any unusual conditions to the department Supervisor or Lead., • Follow work orders to perform operations on various parts and products, • Reinforces safety expectations. Ensures safety operating practices are demonstrated. Reports issues/concerns to Supervisor., • Support quality and compliance by adhering to all procedures, work instructions, and forms per the Quality Management Systems (QMS). EDUCATION QUALIFICATIONS • High School Or Equivalent (Preferred) EXPERIENCE QUALIFICATIONS • No previous work experience required (Preferred), • Manufacturing Experience (Preferred) KNOWLEDGE & SKILLS THAT ENABLE SUCCESS • Problem Solving - Working Experience, • Quality Inspection Metrology Tools - Working Experience, • Standard Operating Procedures - Working Experience, • Quality Management - Basic Knowledge, • Mathematical Ability - Basic Knowledge, • Manufacturing Safety - Working Experience, • Active Learning - Basic Knowledge, • Information Capture - Working Experience, • Hand Dexterity - Extensive Experience, • Time management - Working Experience, • Data Entry - Basic Knowledge, • Communication - Basic Knowledge, • Blueprint Reading - Basic Knowledge, • Accuracy and Attention to Detail - Working Experience PHYSICAL DEMANDS • Must be able to remain in a stationary position - Constantly, • Must be able to move about the inside of the building - Occasionally, • Must be able to move equipment around the building - Occasionally, • Must be able to position oneself and move under/around/over equipment - Occasionally, • Must be able to handle/adjust/inspect/position various items and equipment - Constantly, • Must be able to communicate and exchange information with others - Frequently, • Must be able to perform tasks that require repetitive handling/adjusting/inspecting/positioning of items and equipment - Constantly, • Must be able to distinguish and detect information such as writing and defects - Frequently, • Must be able to move equipment - Occasionally WORKING CONDITIONS • Noise - Occasionally WHAT WE OFFER * Opportunity to work in a growing company * Ability to help people live a longer, more active life * Comprehensive benefit package * Ability to work in an organization that values: * * Integrity First: We do the right thing * Teamwork: We are one Orchid * Results: Our results matter ADDITIONAL REQUIREMENTS * Candidates offered employment may be required to submit to a pre-employment background check and pre-employment drug-screening based on position requirements * Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time * Candidates must be able to provide proof of eligibility to work in the United States through eVerify At Orchid, we fully support a diverse and inclusive workplace and we are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, color, religion, sex, sexual orientation, gender identity, national origin, hair type, age, status as a protected veteran, or disability. Orchid Orthopedic Solutions only pays fees for solicited presentations of job seekers submitted through our preferred vendor job board by recruiters, employment agencies, or other parties.

Job Description Technician will trouble-shoot, repair, audit, service, startup and modify equipment at various customers’ production and manufacturing facilities. The equipment is an industrial cabinet x-ray system used in the food industry for contaminant detection as a quality control & food safety tool. Provide technical support on-site or from remote location(s) or from our Vancouver, WA office. Technicians must rely on their experience, training and judgment to plan and accomplish goals. We provide training and support for all employees no matter the experience. All tools and equipment for the job are provided by the company. Job Duties: • Perform services, startup, training & provide technical support for industrial equipment., • Quote parts, facilitate delivery and install on equipment., • Document all maintenance, certifications, problems and solutions of equipment., • Perform testing in our lab., • Assess equipment performance based on field experience and recommend upgrades that would improve customer production and satisfaction., • Provide advanced remote (telephone, email, online support) to customers for technical issues., • Maintain a high technical knowledge level of products & peripheral systems., • Conduct on-site application specific and general machine training., • 2 - 5 years’ experience in service or electronics industries beneficial but not required., • Bachelors or Associates Degree in Computer Science, Engineering, or related fields beneficial but not required., • Availability to travel and work outside of standard Monday-Friday schedule required for both planned and last-minute services. Service area includes: Oregon, Washington, Idaho, California, Alaska, Hawaii, Arizona, Utah, Montana. Occasional travel to other states and international countries. Expected travel 50%., • Possess and demonstrate excellent organizational, communication, interpersonal skills with the ability to multitask and collaborate on projects., • Ability to work overtime if necessary., • Ability to convey complex technical details., • Ability to lift 50+ lbs. Check out ABM Equipment: Company DescriptionFounded in 1972, ABM Equipment & A-1 Scales have been equipment suppliers and servicers for over 40 years. If you need to move it, grind it, convey it, dry it, process it, store it, package it, or make sure it is safe for consumption, ABM does the job right the first time.Founded in 1972, ABM Equipment & A-1 Scales have been equipment suppliers and servicers for over 40 years. If you need to move it, grind it, convey it, dry it, process it, store it, package it, or make sure it is safe for consumption, ABM does the job right the first time.

Job Description Join Our Team and Power the Future of Precision Manufacturing! Are you a hands-on problem-solver with a passion for CNC technology? Ellis Machinery & Equipment, a leading distributor of some of the top high-performance CNC machine tools in the world is expanding our service group in Oregon and Washington. We're seeking a dedicated CNC Field Service Engineer to deliver top-tier installation, maintenance, and repair services to our valued customers across the state. If you thrive in dynamic environments, enjoy troubleshooting complex machinery, and want to be part of a supportive team that values innovation and work-life balance, this is your opportunity! Qualified applicants should know/experience in: • 2+ years as a Field Service Engineer or Technician working with CNC Machines. (Working with Makino, YCM, Fanuc preferrable)., • Knowledge of CNC programming, PLC's, servo drives, and control systems., • Excellent problem solving skills with the ability to read blueprints, schematics and use diagnostic tools. Key Responsibilities: • Perform on-site installations, preventative maintenance and repairs on CNC Machine Tools, including diagnostics of mechanical, electrical, hydraulic and pneumatic systems., • Troubleshoot and resolve technical issues efficiently, minimizing downtime for customers., • Provide training and technical support to clients, ensuring optimal machine performance and safety., • Document service activities, parts usage, and recommendations in our CRM system., • Collaborate with sales and engineering teams to identify opportunities and continuous improvements., • Adhere to company and industry safety standards., • Travel within Oregon and occasionally beyond to customer sites. Qualifications also include: • Must have a clean driving record and a valid drivers license., • Must have a US Passport or equivalent., • Must have your own reliable transportation and willing to travel local/regional., • Must be able to safely lift to 50lbs. Why Join us: • Competitive Salary: $80,000 - $100,000.+ (DOE) In addition, performance bonuses and overtime pay., • Comprehensive Benefits., • Medical/Dental/Vision/Life Insurance + 401(k) plan and company match., • Paid Time Off., • Full time Monday - Friday only., • Company Training and Company provided laptop, cell phone., • Vehicle Allowance. We offer a Supportive Culture: We prioritize work-life balance, team collaboration and professional development. We have tenure of 10+ years on the team. If you would like to be part of helping Oregon's manufacturing sector thrive by keeping cutting edge machines and tools running smoothly, please send your resume with your qualifications. Company DescriptionEllis Machinery & Equipment, Inc. is a CNC Machine Tool Distributor and Service Leader in the Pacific Northwest with a reputation for dependability and quality. We represent some of the top CNC Machine Tool Builders in the world that make machines and machine tools for the aerospace, medical and automotive industries just to name a few.Ellis Machinery & Equipment, Inc. is a CNC Machine Tool Distributor and Service Leader in the Pacific Northwest with a reputation for dependability and quality.\r\nWe represent some of the top CNC Machine Tool Builders in the world that make machines and machine tools for the aerospace, medical and automotive industries just to name a few.

Location(s): Portland, OR, US, 97230 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68123 Scheduled Shift: Monday-Friday, 8:00 AM-4:00 PM (8hour shift) Rate: $24/hr. SUMMARY The Warehouse Technician position is an hourly position that reports to the Plant Controller. The employee is responsible for handling all finished product for transport out of the facility and all raw materials coming into the facility. The employee also is responsible for monitoring inventory levels of raw material, finished product, and scrap. Principal Duties and Responsibilities: • Load outbound finished product onto trucks for shipment, • Utilize SAP software for various shipping and receiving duties, • Stage product for upcoming shipments during downtime, • Monitor inventory levels and execute accurate cycle counts at regular intervals, • Unload raw materials entering the facility, • Perform all tasks safely, and ask for assistance when presented with an unfamiliar situation SKILLS AND ABILITIES The employee should hold the following abilities: • Once trained in all basic functions of the role, must be able to remain on-task and must be comfortable receiving direct instructions from supervisor, • Must be able to read, write, and speak English, • Must be able to understand verbal and written instructions, • Must possess strong interpersonal and communication skills, • Must have the ability to multi-task, • Must have strong forklift driving skills, • Must work well in a team environment, • Must have the ability to do basic mathematical calculations, • Must be able to read instruments and accurately record readings, • Must have basic computer skills COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: • Operate a computer or other keyboard instrument, • Operate a warehouse management material tracking system and its software EDUCATION AND/OR EXPERIENCE The employee should have the following: • Minimum High School Diploma or equivalent is required, • Possess valid forklift driver's certification ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: • Sit and/or stand for extended periods of time, • Repeatedly enter and exit a forklift, • Work in high and low temperatures, • Work in wet conditions, • Lift up to 50 pounds This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Nearest Major Market: Portland Oregon

Join Kyocera International, Inc. We're hiring a Clean Line Tech 1 at our Vancouver, WA , location! Salary Range: $18 - $20 hourly (Final offer based on experience, education, skills, and market factors) Why Kyocera? With nearly 80,000 employees worldwide, Kyocera is a global leader in advanced ceramic technologies used in aerospace, automotive, medical, and semiconductor industries. Our materials power everything from smartphones to space shuttles - and we're just getting started. What Makes Us Stand Out? We don't just offer jobs - we offer careers with purpose, stability, and growth. Here's what you can expect: Generous Time Off • 3 weeks of vacation to start (120 hours/year), • 10 paid holidays annually Financial Wellness • Competitive pay, • 401(k) with company match, • Employer-paid pension plan Comprehensive Health Coverage • Medical, dental, and vision insurance, • Life insurance, • Flexible Spending Account (FSA), • Employee Assistance Program (EAP) Investing in You • Tuition reimbursement, • Paid time off to volunteer, • Flexible schedules Work-Life Balance & Culture • Onsite gyms, walking tracks, and employee gardens at larger locations, • Long-tenured team (many with 30+ years of service!), • Inclusive and diverse workforce, • A company philosophy rooted in doing the right thing as a human being Our Philosophy Kyocera's culture is deeply inspired by our founder, Dr. Kazuo Inamori. His values guide our decisions and shape our workplace. Learn more about our guiding principles here: Ready to Make a Difference? Apply today and become part of a team that's shaping the future - one innovation at a time. GENERAL DESCRIPTION OF POSITION The Clean Line Technician 1 will perform various tasks in Chemical and Clean Room environments designed to ensure manufactured parts meet customer required cleanliness specifications. They will be responsible for cleaning parts through the Rough Clean Line, Chem Line, visual inspection, Clean Room packaging, and Packaging. REQUIREMENTS: High school diploma or GED required. 6+ months of related experience required, or equivalent combination of education and experience preferred, preferably in a manufacturing/production environment. Ability to read, write and comprehend verbal as well as written instructions in English. Basic computer skills: excel, outlook, spreadsheet. Skill in reading manufacturing prints. Willingness to wear latex and nitrile gloves, masks, chemical PPE, and/or cleanroom apparel. Ability to stand, walk or sit for extended periods on production floor. Ability to grab small parts or hand tools with hands. Ability to lift and carry up to 35lbs. Eligible to work in an ITAR environment. Pass drug and background check. ESSENTIAL DUTIES AND RESPONSIBILITIES • Follow all safety standards and procedures to maintain a safe and organized working environment., • Follow all quality standards and procedures to ensure part quality meets customer and internal specifications., • Use various approved tools and chemicals to hand work parts to meet visual inspection criteria., • Load multiple parts of different dimensions and weight into baskets to be ran through the Chem Line., • Performing incoming and final visual inspection following documented procedures to ensure parts meet customer and internal standards., • Package and label parts in a clean room environment using sealer., • Work individually or as a team to meet deadlines and maintain efficient production output while following all safety and quality standards., • Responsible for some chemical tank dumps and builds. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. PHYSICAL ACTIVITIES The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is continuously required to talk or hear; regularly required to stand, use hands to finger, handle, or feel; frequently required to walk, sit; and occasionally required to reach with hands and arms, stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 35 pounds, regularly lift and/or move up to 15 pounds. Specific vision abilities required by this job include close vision, color vision, and depth perception. 20/20 corrected vision may be required. ENVIRONMENTAL CONDITIONS The following work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the functions of this job, the employee is frequently exposed to work near moving mechanical parts, chemicals, fumes or airborne particles. The noise level in the work environment is usually moderate. ADDITIONAL INFORMATION The above statements are intended to describe the work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. The duties and responsibilities of this position are subject to change and other duties may be assigned or removed at any time. This position may require exposure to information subject to US Export Control regulations, i.e.: the International Traffic and Arms Regulations (ITAR) or Export Administration Regulations (EAR). All applicants must be US persons within the meaning of US regulations. Kyocera International, Inc. values diversity in its workforce, and is proud to be an AAP/EEO employer. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, or on the basis of disability. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact Kyocera International, Inc.'s Human Resources team directly. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Kelly Science & Clinical is seeking several Biomanufacturing Associates for Direct Hire positions at a premier biotech company in the Portland, OR area. If you're motivated, detail-oriented, and eager to contribute to a fast-paced manufacturing environment, this is a great opportunity to take your career to the next step! Pay Rate: 2A: Base pay $21/hour + shift differential = $26.12/hour 2B: Base pay $21 + shift differential = $25.86/hour Schedule: 2A: Alt Sat, Sun-Tues, 7:00pm-7:30am OR 2B: Alt Sat, Weds-Fri, 7:00pm-7:30am Overview As a Biomanufacturing Associate, you will play a vital role in producing high-quality, custom oligonucleotide products that power the future of biotech. In a dynamic and fast-paced lab environment, the role involves adhering to SOPs, operating automated lab equipment, documenting processes, and supporting manufacturing schedules, with a strong focus on quality and safety practices. Company Culture Fast paced environment without too much structure/red tape to make decisions. Growth opportunities available within a 110K sq ft state-of-the-art "factory of the future" that was completed and started production in 2022-2023. Responsibilities: • Contribute to the production of high-quality custom products in a high-throughput lab, following established SOPs and manufacturing standards., • Efficiently perform molecular and cell biology processes, including PCR and DNA purification, contributing to the production of custom DNA-based products., • Independently handle the operation of various laboratory equipment and robots while ensuring safety and adherence to ISO and lean manufacturing practices., • Thoroughly document processes and update work instructions, supporting troubleshooting and maintaining high attention to detail., • Organize shipping of products and maintain consistent work output under minimal supervision. Qualifications: • Bachelor's degree in Biology, Biochemistry or related field OR previous experience working in GMP environment., • Fresh graduates or candidates with relevant laboratory experience in a manufacturing or high-throughput biotech setting will be considered, • Familiarity with molecular biology techniques such as PCR, DNA quantitation / purification, • Strong documentation skills with attention to detail, • Ability to work independently, follow SOPs precisely, and work safely with chemicals and hazardous materials, • Good computer skills, including proficiency with Excel and Word, • Comfortable working in a team-oriented laboratory environment and standing for extended periods, • Ability to work on the night shift Seize the opportunity to be part of something extraordinary where your work contributes to revolutionary advances in health, sustainability, and technology. Apply now and help us write the future of DNA synthesis!

Why join us? Typical hours: 5:00 AM – 1:30 PM (Monday–Friday) Some flexibility on shift timing based on production needs Starting pay: $18–$20/hour depending on experience Steady, long-term work with opportunities to grow skills over time Job Details Responsibilities: Operate and monitor produ

As part of a small startup team, this position requires strong mechanical aptitude, attention to detail, and the ability to work hands-on in a fast-paced pilot-scale manufacturing setting. Operate pilot-scale manufacturing equipment according to established procedures and process parameters.

Division: Seattle Main Project Location(s): Seattle, WA 98101 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Environmental Health and Safety Compensation:Salaried Exempt * This position is for a full-time traveling assignment supporting projects across the United States. We are looking for project experience within Aviation, Data Center, Pharmaceutical, Healthcare, Industrial/Manufacturing, and EV/Battery/Renewables market segments. * Position Description: Partner with Environmental Health & Safety (EH&S) and project teams to enforce site compliance with company, EH&S programs, policies, procedures, and regulatory requirements on a single construction project within business unit's geographic area. Lead training of safe work practices to educate and inform and guide project teams on management of environmental and hazardous materials reports and conditions. Essential Duties & Key Responsibilities: • Lead, direct, and enforce Environmental Health & Safety (EH&S) on single construction project, based on safety staffing requirements as defined by Headquarters (HQ) EH&S policy., • Manage time and resource allocation and provide safety leadership to assigned project., • Assess project Safety practices and known and potential safety related exposures, develop and implement action plans to mitigate risks, and drive changes to improve project team safety awareness and activities., • Communicate requirements for improving performance to project leadership and team for adoption and adherence to changes, using project specific-safety standards, best management practices, and EH&S policies and procedures., • Understand site safety trends and participate in reducing Project Incident Rates by meeting or exceeding established Business Unit (BU) goals and manage regulatory exposures to zero citations., • Develop training for project site-specific needs to educate project management, employees, subcontractors, and Turner Trade employees on Environmental Health & Safety (EH&S) programs, policies, and procedures and provide training on safe work practices to encourage and enforce adoption and adherence., • Promote safe work practices and safe working conditions in accordance with company and Environmental Health & Safety (EH&S) policies, Federal, State, and Local regulations, and owner contractual requirements., • Maintain and enhance working relationships with project staff and subcontractor Safety Representatives., • Develop and enforce project Safety Program and related policies and procedures., • Identify unsafe actions and conditions and engage with project team to implement immediate corrective actions in accordance with Turner, Federal, State and Local regulations and owner requirements., • Develop accountability model for project team to ensure pre-planning for activities and tasks for subcontractors and trades., • Review subcontractor safety programs for completeness and compliance with company and EH&S policies, Federal, State, and Local regulations, and owner contractual requirements., • Review quality of Pre-Task Plans (PTPs) for project subcontractors and Trades based on contractual requirements., • Hold Preconstruction planning meetings with subcontractors to review site safety program and job hazard analysis for their scope of work and to establish and review risk mitigation plans., • Develop safety action items for Preconstruction meetings and verify subcontractors conduct training as per OSHA standards., • Conduct effective worker orientation program for new employees; administer and record participation., • Collaborate with project leadership to create project specific safety reports, assess metrics, and make recommendations for improvement over baseline., • Ensure timely log of subcontractors' toolbox safety meetings., • Conduct and review project team's safety audits, assess recommended corrective actions, and issue reports of violations and/or unsafe practices for immediate resolution., • Other activities, duties, and responsibilities as assigned. The salary range for this position is estimated to be 130,000.00 - 190,000.00 USD annualized. Qualifications: • Bachelor's Degree from accredited degree program in Occupational Safety & Health, Engineering, or related field of study, and minimum of eight (8) years of related construction safety experience, or equivalent combination of education, training, and experience, • Construction Health Safety Technician (CHST) certification required or within 2 years of appointment, • Completed OSHA 30-hour training and maintain current First Aid/CPR/BBP and AED certifications, • Knowledgeable of Federal, State, and local Environmental Health & Safety regulations, • Working knowledge and consistent application of safety and environmental principles and techniques, • Ability to identify known and potential safety related exposures and lead implementation of corrective actions, • Familiar with general construction operations, • Demonstrate elements of leadership from within, teamwork, and interpersonal skills to build teams and professional relationships, • Professional verbal and written communication skills and effective presentation delivery skills, • Exceptional organizational skills with high attention to detail, • Analytical thinking, good judgment, and complex problem-solving skills. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee must regularly lift and/or move up to 15 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. #LI-SC1 Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Division: Critical Facilities-Data Centers Project Location(s): Spokane, WA 99201 USA Minimum Years Experience: Travel Involved: 100% Job Type: Regular Job Classification: Experienced Education: Job Family:Environmental Health and Safety Compensation:Salaried Exempt * This position is for a full time traveling assignment supporting an Advanced Technology project, which includes our Data Center, Pharmaceutical, Industrial/Manufacturing, and EV/Battery/Renewables market segment groups (MSG). * Position Description: Partner with Environmental Health & Safety (EH&S) and project teams to enforce site compliance with company, EH&S programs, policies, procedures, and regulatory requirements on a single construction project within business unit's geographic area. Lead training of safe work practices to educate and inform and guide project teams on management of environmental and hazardous materials reports and conditions. Essential Duties & Key Responsibilities: • Lead, direct, and enforce Environmental Health & Safety (EH&S) on single construction project, based on safety staffing requirements as defined by Headquarters (HQ) EH&S policy., • Manage time and resource allocation and provide safety leadership to assigned project., • Assess project Safety practices and known and potential safety related exposures, develop and implement action plans to mitigate risks, and drive changes to improve project team safety awareness and activities., • Communicate requirements for improving performance to project leadership and team for adoption and adherence to changes, using project specific-safety standards, best management practices, and EH&S policies and procedures., • Understand site safety trends and participate in reducing Project Incident Rates by meeting or exceeding established Business Unit (BU) goals and manage regulatory exposures to zero citations., • Develop training for project site-specific needs to educate project management, employees, subcontractors, and Turner Trade employees on Environmental Health & Safety (EH&S) programs, policies, and procedures and provide training on safe work practices to encourage and enforce adoption and adherence., • Promote safe work practices and safe working conditions in accordance with company and Environmental Health & Safety (EH&S) policies, Federal, State, and Local regulations, and owner contractual requirements., • Maintain and enhance working relationships with project staff and subcontractor Safety Representatives., • Develop and enforce project Safety Program and related policies and procedures., • Identify unsafe actions and conditions and engage with project team to implement immediate corrective actions in accordance with Turner, Federal, State and Local regulations and owner requirements., • Develop accountability model for project team to ensure pre-planning for activities and tasks for subcontractors and trades., • Review subcontractor safety programs for completeness and compliance with company and EH&S policies, Federal, State, and Local regulations, and owner contractual requirements., • Review quality of Pre-Task Plans (PTPs) for project subcontractors and Trades based on contractual requirements., • Hold Preconstruction planning meetings with subcontractors to review site safety program and job hazard analysis for their scope of work and to establish and review risk mitigation plans., • Develop safety action items for Preconstruction meetings and verify subcontractors conduct training as per OSHA standards., • Conduct effective worker orientation program for new employees; administer and record participation., • Collaborate with project leadership to create project specific safety reports, assess metrics, and make recommendations for improvement over baseline., • Ensure timely log of subcontractors' toolbox safety meetings., • Conduct and review project team's safety audits, assess recommended corrective actions, and issue reports of violations and/or unsafe practices for immediate resolution., • Other activities, duties, and responsibilities as assigned. #LI-SO2 Qualifications: • Bachelor's Degree from accredited degree program in Occupational Safety & Health, Engineering, or related field of study, and minimum of 4 years of related construction safety experience, or equivalent combination of education, training, and experience, • Construction Health Safety Technician (CHST) certification required or within 2 years of appointment, • Completed OSHA 30-hour training and maintain current First Aid/CPR/BBP and AED certifications, • Knowledgeable of Federal, State, and local Environmental Health & Safety regulations, • Working knowledge and consistent application of safety and environmental principles and techniques, • Ability to identify known and potential safety related exposures and lead implementation of corrective actions, • Familiar with general construction operations, • Demonstrate elements of leadership from within, teamwork, and interpersonal skills to build teams and professional relationships, • Professional verbal and written communication skills and effective presentation delivery skills, • Exceptional organizational skills with high attention to detail, • Analytical thinking, good judgment, and complex problem-solving skills, • Travel required, access to reliable transportation required Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee must regularly lift and/or move up to 15 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Were hiring a Maintenance Technician to support our high?speed beverage production facility. Perform preventive maintenance and rebuild components. Maintain accurate maintenance and compliance documentation.

Job Title: Assembler (Cleanroom / Equipment Assembly).

Job Description Position Title: Process Technician Department: Engineering Reports to: Senior Engineer Wage Range: $27-$33 The Process Technician, reporting to the Senior Process Engineer within the Engineering department, plays a vital role in supporting and optimizing manufacturing processes. This hands-on position is responsible for equipment program design, operator training, process troubleshooting, and continuous improvement initiatives. The technician will work closely with production, maintenance, and engineering teams to enhance equipment performance, resolve technical challenges, and ensure adherence to quality and industry standards. Responsibilities & Duties Include: • Process Support, • Design and implementation of programs for equipment in assigned areas of expertise, • Training and ongoing technical support for operators to enhance proficiency and optimize performance, • Collaborate with operators to troubleshoot and resolve equipment-related challenges during operation., • Support for production teams in resolving product-related challenges and have direct communication with customers when required., • Revise and update assembly documentation as required to facilitate continuous process optimization and improvement, • Coordination with equipment manufacturers to address technical issues and facilitate effective solutions as necessary, • Collaboration with the Maintenance team to execute a range of equipment maintenance tasks, • Monitor and report status of departmental goals in line with company vision, • Assist with implementation of new equipment and/or processes related to assigned areas of expertise, • Analysis of process data for the purposes of developing achievable process improvement goals and providing recommendations for continuous improvement projects, • Maintenance of processes for compliance with SFE and customer quality systems, industry standards, and best practices, • Application of creative problem-solving methods for processes and product related issues, • Corrective action investigation and resolution related to areas of expertise, • Systems, • Use of various software tools for root cause and trend analysis of various issues, • Create and maintain QMS procedures related to assigned areas of expertise, • Complete various work orders and equipment repair orders within Maintenance tracking software, • General, • Apply continuous improvement principles and actively seek opportunities to reduce waste and optimize processes, • 1 year of relevant experience, • Ability to work as part of a team, • Proficient with data analysis and root cause problem-solving, • Experience interpreting engineering drawings, work instructions, processes, and assembly specifications, • Demonstrated mechanical aptitude and problem-solving abilities, • Working knowledge of applicable standards (e.g. J-STD-001, AS9100, NADCAP) Minimum Competencies: • Excellent verbal/written interpersonal skills, • Be able to work in a fast-paced, team environment, • Familiarity with problem solving techniques, • Excellent computer skills Preferred Qualifications: • Educational background in an engineering-related discipline, • 3 years previous electronics assembly experience, • SMT and PTH soldering expertise, • Experience with reading equipment schematics, • A passion for analytical problem solving As part of our commitment to a safe and trustworthy workplace, Impact ES Vancouver conducts background checks on all final candidates. These checks may include verification of employment history, education, criminal records, and other relevant information, depending on the position. All background checks will be conducted in compliance with applicable federal, state, and local laws, including the Fair Credit Reporting Act (FCRA). A candidate's background will not be used as the sole basis for disqualification unless it is determined to be directly related to the responsibilities of the position.

Job Description Description: Pay Rate Range: $25 - $28/hr (or more depending on experience) Temp to hire 4/10 Work Schedule (Mon - Thurs) 6am - 4:30pm JOB SUMMARY: The Product Repair Technician performs inspections, tests, troubleshoots and repairs on customer returned equipment, in accordance with rules and regulations. Provides an efficient and effective repair service that meets company and departmental obligations and objectives. The Product Repair Technician will be performing, ready to perform, or eligible to perform safety-sensitive work and therefore will be part of the OECO LLC Drug and Alcohol Testing Program. The Program includes random, reasonable suspicion, and post-accident testing. Job Core Responsibilities • Performs teardowns, overhauls and functional testing of various repair station products and items, • Ensures that all repair work is performed according to procedures and per correct document revision, • Assists in the development and implementation of product improvement initiatives, • Inspects, tests, troubleshoots and repairs shop equipment as required, • Completes necessary trainings to maintain knowledge and skills required for job performance, • Performs documentation of all repairs and re-certifications of equipment according to regulatory, customer and departmental requirements, • Other responsibilities as assigned, • Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Job Specifications Education: A Secondary Certificate/High School Diploma or equivalent GED is required. Certifications: Vocational training, apprenticeships or the equivalent experience in related field Years Experience: 2-5 years of relevant experience Skills: • Excellent technical knowledge and skills in product repair, • Good communication skills both written and verbal, • Proven troubleshooting skills to component level on complex electronic circuits, • Ability to recognize and solve typical problems that can occur in own work area; evaluates and selects solutions from established options Must be able to read a ruler, micrometer, and calipers. Familiar with the use of hand tools, as screwdrivers, wrenches, pliers etc. Must have good eye/hand coordination. Computer skills required such as data input, word documents etc. Must have the ability to read complex instructions, blueprints and schematics. Must have knowledge of manufacturing processes in order to troubleshoot rejects and failures. Possess basic knowledge of electronic testing equipment and their operation. Ability to interpret and follow engineering prototype sketches. Assist in design changes with Engineering. Ability to read and interpret company documents, such as, safety rules, operating and manufacturing instructions, and Company policies and procedures. Have the ability to clearly communicate with all internal and external customers in English. Attention to detail is a must.

Job DescriptionSalary: $30.00 - $35.00 hr. DOE Job Summary Cowlitz Clean Sweep (CCS) a Pacific Northern Environmental LLC division, is seeking an CDL A/B Hazmat Driver who thrives in a fast-paced, team environment and has the ability to provide exceptional service and skills to our company, clients, and employees. Pacific Northern Environmental, LLC consists of five divisions including Advanced Electrical Technologies (AET), Taurus Power and Controls (Taurus), Cowlitz Clean Sweep (CCS), Pacific Northern Environmental Construction (PNEC), and WasteXpress Environmental (WXE). Together, we specialize in commercial and petroleum construction, industrial and commercial electrical, industrial cleaning, and hazardous waste disposal. PNE LLC is a multi-state organization with operating offices in Washington, Oregon, Idaho, and Hawaii. In addition, we carry out projects across the United States. CCS provides industrial cleaning and spill response to almost every pulp and paper mill in the Pacific Northwest. We also service major oil companies and a wide range of manufacturing and industrial clients. CCS has demonstrated its ability to complete large and complex industrial cleaning challenges on schedule, within budget, and in compliance with the most stringent industrial health & safety programs. No industrial cleaning job is too large or too small for CCS. CCS offers call-in pay and premium for after-hours work. The CDL A/B Hazmat Driver is responsible for safety transporting hazmat or other materials from the job sites to safe disposal locations. Hands on work with the field team is required for this position. Education and Experience Qualifications • High School Diploma or GED., • 18 years of age or older., • Valid Drivers License Required., • Must possess a valid Class A or B, Tanker endorsement, and Hazmat endorsement., • 2-3 years experience driving DOT regulated vehicles is required., • Experience driving Hazmat materials strongly preferred, • Experience working in a safety sensitive field. Duties and Responsibilities The CDL Hazmat Driver/Cleaning Technician possessing the education and experience listed above performs the following: • Safely operate and maintain company vehicles as required for job duties, ensuring compliance witha ll traffic laws and company policies, • Operator truck controls to engage, move, and reposition vacuum hoses as necessary when operating a vacuum truck., • Drives in accordance with all company safety policies and within all laws, rules, and regulations., • Complete DOT required pre and post trip inspections, completing any required paperwork as needed., • Operate box van carrying drums with a lift gate in order to pick up and/or deliver drums at a specific destination., • Operate truck in accordance with instructions received from dispatch or the supervisor each day., • Loads, unloads, and sets up vacuum hoses at job site when operating the vacuum truck., • Report all accidents and injuries and completes an accident report form when necessary., • Ensures all loads are properly secured prior to driving and maintains safety while driving., • Operation of different work-related equipment, including but not limited to high pressure pumps, vacuum trucks, different industrial cleaning agents, etc., • Remain up to date on all safety trainings and mill trainings, mostly completed on an annual basis., • Other duties as assigned. Working Conditions and Physical Requirements The candidate must possess and be adaptable to the following physical abilities and working conditions: • Move about the jobsite as needed., • Move work related equipment up to 50lbs., • Remain in a stationary position for long periods of time., • Operate various technological devices, including but not limited to a computer., • Operate machinery in compliance with all safety procedures., • Occasionally ascend/descend ladders and/or stairs. Employee Benefit Program Pacific Northern Environmental, LLC presently provides coverage for: • Medical, Dental & Vision options with low premiums for employees and eligible dependents, • Life AD&D - Voluntary and Company paid., • Specialty RX programs., • Group AFLAC options Hospital, Critical, Accident and short-term Disability Plans, • Telehealth by Teladoc., • 401(k) with discretionary annual company matching contributions., • Employee Assistance Program (EAP), • Paid Trainings and Certifications, • Paid Time Off, • Paid Holiday for qualifying employees, • Up to $2,000 per year profit sharing for qualifying employees, • Annual company events, • Safety Incentives Please apply directly Pacific Northern Environmental, LLC is an Equal Opportunity Employer. Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. This job description is a general description of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees of Pacific Northern Environmental, LLC (PNE, LLC) are expected to perform tasks as assigned by PNE supervisory/management personnel, regardless of job title or routine job duties. We are a Drug and Alcohol-Free Workplace. All new hires are subject to testing in accordance with local, federal, and state guidelines. #urgentlyhiring

Job Description Hours: Starting at $43/Hourly • Monday - Friday 7:00am - 3:30pm (possible overtime until 5:30pm and some Saturday’s), • Flexibility to support 2nd/3rd Shift Team Members on occasion. Requires LME (Oregon electrical license) Summary of position: • Responsible for scheduling, coordinating, and execution of daily maintenance operations, • Work order planning and distribution of work, • Supports technician development/training, • Facilities, orders, equipment reliability, maintaining accurate records and inventory, • Requires strong organizational and communication skills and the ability to work flexibly across sites and shifts. Key Responsibilities: • Schedule and assign preventative, emergency, and routine maintenance tasks using CMMS., • Review and prioritize work requests; estimate labor hours and plan job execution., • Support Sr. Engineer in training, developing, and motivating the maintenance team., • Track labor capacity, work order backlog, and maintenance team performance metrics., • Manage MRO inventory—order, receive, issue, and maintain parts and materials., • Coordinate building and facility maintenance, including vendor scheduling., • Ensure maintenance records and stormwater program inspections are completed and documented., • Communicate effectively with internal teams and vendors; maintain professional relationships., • Work with ladders, lifts, and fork trucks; meet physical demands of maintenance work., • Ensure compliance with safety standards, operational procedures, and quality requirements. Experience: • Must have Manufacturing Maintenance Experience (5+ experience), • Pneumatics/Hydraulics, • Auto Cad, • Class ‘B’ Electrical License, • Programmable Logic Controller Troubleshooting SUMMARY OF POSITION: The Lead Maintenance Technician / Technical Scheduler works as part of the maintenance team to organize and distribute the work orders to several maintenance team members. This position is responsible for the effective execution of daily maintenance activities to include scheduled work, preventative maintenance and emergency work. In order to fulfill these responsibilities in the most effective manner, he/she is charged with supporting the Sr. Engineer in developing the group of maintenance technicians into a well-trained and committed “maintenance team.” This position will handle a variety of tasks based on business necessity. This position has a high level of responsibility. PELLA CORPORATION REQUIREMENTS: · Must be 18 years of age or older. · Pass drug screen. · Pass pre-employment tests, as required. · Pass pre-work ability screen, as required. · Pass Job Certification test(s), as required. WORKING ENVIRONMENT: · Tobacco free workplace. · Wear personal protective equipment (PPE) as required for each position. · Safety glasses required in designated areas. · Noise level requires hearing protection in designated areas. · Seasonal high temperatures and humidity. · Fast paced work with productivity goals. · Work in a team environment. · May require frequent handling of glass and other product materials. · May have frequent exposure to moving mechanical parts. · Probable clothing spoilage due to nature of work · Part of work performed in office setting ESSENTIAL RESPONSIBILITIES: · Must be willing to travel to other locations as necessary, by various modes of transportation including air · Strong planning and organizational skills as well as good interpersonal and communication skills with internal and external customers and vendors · Responsible for screening work requests prior to approval, as well as classifying, determining job content, and assigning work orders · Formulate hour estimates and completion dates to establish and maintain a plan for accomplishing work · Performs the control of job execution by assigned personnel and follow up on job with internal customer. · Works with Sr. Engineer in training and motivation of maintenance team personnel · Prepares weekly schedule and works in conjunction with Management and Engineers to approve the schedule to ensure machine availability. This may include shutdown scheduling. · Works with Management to track labor capacity, manage work order backlog, and ensure a high degree of on-time completion of work · Mandates minimum information on work orders to include complete names, dates, machines worked on, time (worked and downtime), cost centers, parts issued to and account numbers, and reason codes for tracking failures in the computerized maintenance management system (CMMS). · Must be able to order, issue, change stocking levels, and transfer parts · Responsible for tracking metrics related to maintenance team · A detailed duties and responsibilities list is included with this job description · Flexibility of work hours including mandatory overtime when business needs requires. · Ability to move to different lines and responsibilities. · Able to safely work with and around moving equipment. · Ability to learn and rotate to three (3) or more different responsibilities and / or positions. · Ability to communicate in a concise, polite and respectful manner with team members. · Regular / dependable attendance consistent with attendance guidelines is required. · Meet Takt time with productivity goals with accuracy and quality. · Operate equipment/tools that require close control, adjustment, and following production orders. · Comply with safety, quality, and production requirements and procedures. · Ability to meet physical requirements of the job. · Ability to learn and perform repetitive job tasks. · Perform Total Productive Maintenance duties. · Maintain good housekeeping. · Follow Standard Work or other documented processes. ADDITIONAL RESPONSIBILITIES: · Track and report progress against schedules to ensure successful, on-time completion · Coordinate deliveries and expedite as needed · Other duties may be assigned by management or leads. EDUCATION & EXPERIENCE: · High school diploma or equivalency desired. · Manufacturing-related experience is preferred. · Job specific experience preferred. SKILLS: · Able to work with minimal supervision · Excellent oral and written communication · Proficient computer knowledge · Read and interpret blueprints · Read and interpret machine and parts manuals · Accuracy and attention to detail · Proficient mechanical and math aptitude · Time management · Ability to work with internal and external customers · Decision making / problem solving in a manufacturing environment with minimal supervision. · Use of hand tools and machinery is required. · Requires communication skills and the cognitive ability to learn the safety, quality, and productivity standards. · Learn, comprehend and implement safety and quality procedures to assure the safe and proper operation of the equipment. · Ability to add and subtract two digit numbers and to multiply and divide with 10’s and 100’s. · Familiarity with American units of measure for weight, time, and distance. · Use of measurement devices. · Read and interpret process documentation (SOP, Cut Sheets, Standard Work, etc.) FACTORY SKILLS CLASSES PREFERRED: · Blueprint Reading · Industrial Math · Measurement Technology · Algebra/Trigonometry · Lift Truck License · Understanding and following Continuous Improvement (CI) principles MAINTENANCE TRAINING PREFERRED: · Pneumatics/Hydraulics · Auto Cad · Class ‘B’ Electrical License · Programmable Controllers · Machine Installation Standards · MP2 training and planning PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PRE-WORK SCREEN LEVEL 3 · Lift up to 100 lbs. at waist level on an occasional basis and up to 40 lbs. at shoulder level on an occasional basis when handling products. · Push or pull with up to 100 lbs. of force on an occasional basis when moving products. · Generate up to 100 lbs. of grip strength on an occasional basis with each hand while handling products. · Generate up to 20 lbs. of pinch strength on an occasional basis with each hand while handling products. · Stand on a continuous basis and walk on a frequent basis during the course of each shift. · Reach forward and to the side on a frequent basis when handling products. · Stoop, kneel or squat on an occasional basis when handling products. · Work at an elevated level on an occasional basis when handling products. · Display average eye-hand coordination on a continuous basis while performing job tasks. · The employee is required to use hands to grip or handle; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. · This job requires the use of close vision, distance vision, peripheral vision, and depth perception. · Able to perform repetitive tasks up to 10 hours per day. Refer to Essential Job Functions and Responsibilities. Company DescriptionPella Corporation is a leading American window and door manufacturer headquartered in Pella, Iowa. Founded in 1925, the company designs and produces a wide range of windows, patio doors, entry doors, and garage doors for both residential and commercial use. Pella is known for its focus on innovation, energy efficiency, and high-quality craftsmanship. We offer customizable products with various materials—like wood, fiberglass, and vinyl—to fit different architectural styles and budgets. Our company also emphasizes smart home integration and sustainable manufacturing practices, making it one of the top brands in the U.S. window and door industry.Pella Corporation is a leading American window and door manufacturer headquartered in Pella, Iowa. Founded in 1925, the company designs and produces a wide range of windows, patio doors, entry doors, and garage doors for both residential and commercial use.\r\n\r\nPella is known for its focus on innovation, energy efficiency, and high-quality craftsmanship. We offer customizable products with various materials—like wood, fiberglass, and vinyl—to fit different architectural styles and budgets.\r\n\r\nOur company also emphasizes smart home integration and sustainable manufacturing practices, making it one of the top brands in the U.S. window and door industry.

Job Description Step into a day on our floor You arrive for your shift ready to keep production moving. You check the warehouse management system, confirm incoming receipts, and stage materials. With your forklift certification, you shuttle ingredients and packaging to the right lines, then perform basic autonomous maintenance tasks to keep equipment running smoothly. Throughout the day you monitor safety and quality, track inventory movements, and log any losses or issues so they can be addressed quickly. What you’ll do • Independently run and care for at least one process, machine, or system, following autonomous maintenance (AM) practices., • Partner with coaches and teammates to meet targets across safety, quality, cost, delivery, sustainability, and morale., • Execute standard work, including AM and progressive maintenance (PM) routines, and complete required quality checks., • Use warehouse management systems to manage inventory control and verify received product; accurately stage and replenish materials., • High school diploma., • Forklift certification (Required)., • Mechanical aptitude; comfortable working with machines and basic tools (Required)., • Experience with warehouse management systems for inventory control and receiving (Required)., • Ability to operate machines with coaching and follow safety and quality standards., • Strong reading and writing skills; fluent in the site’s language of communication.

Job Description Cook Solutions Group is seeking an experienced and strategic HR Manager to lead and support key human resources functions within a fast-paced manufacturing environment. This role will serve as a trusted business partner to leadership by providing guidance, coaching, and HR expertise across employee relations, performance management, compliance, payroll, benefits, and organizational development. This is a hands-on role that will be actively involved in managing and overseeing the day-to-day HR processes and functions. We are seeking someone who can step in, take ownership of this area of HR, and provide strong operational leadership. This position offers a clear opportunity for growth into a more strategic HR leadership role as the individual demonstrates proven capability, initiative, and success in the role. The ideal candidate will bring strong HR technical knowledge, hands-on experience, and the ability to balance strategic partnership with day-to-day operational execution. Location: Portland, OR - This is a hybrid position looking for this individual to be onsite 2-3 days a week. What You’ll Do Responsibilities include, but are not limited to: * Serve as a strategic HR business partner to leaders and managers across the organization. * Provide coaching, guidance, and support on employee relations, performance management, workforce planning, and organizational development. * Ensure compliance with all applicable federal, state, and local employment laws and HR best practices. * Support and administer key HR programs including compensation, benefits, training and development, and performance management. * Oversee or support payroll processing, with preference for experience using Paychex Flex. * Maintain and utilize HRIS systems to support accurate employee data, reporting, and HR operations. * Partner with leadership to drive employee engagement, retention, and a positive workplace culture. * Support safety initiatives and collaborate with operational leaders on workforce and compliance matters within a manufacturing environment. * Assist with policy development, process improvement, and implementation of HR programs and initiatives. * Maintain confidentiality and exercise sound judgment in handling sensitive employee and business matters. What You’ll BringQualifications / Education / Experience * Bachelor’s degree in Human Resources, Business, Organizational Development, or a related field required. * 5+ years of progressive Human Resources experience, with a substantial portion of that experience. * Payroll processing experience required; Paychex Flex experience strongly preferred. * Demonstrated success providing value-added HR coaching, guidance, thought leadership, and business partnership in a fast-paced manufacturing setting. * PHR, SPHR, or SHRM certification preferred, but not required. * Strong knowledge of state and federal employment laws and HR compliance practices. * Strong foundation in HR principles, best practices, and their practical application within manufacturing operations. * Broad knowledge of: Safety, Training & Development, employee relations, performance management and organizational planning. * Working knowledge of benefits and compensation programs. * Strong knowledge and hands-on experience with Human Resources Information Systems (HRIS); Paychex Flex experience highly preferred. * Proficiency in Microsoft Office Suite. Benefits Cook Solutions Group (CSG) provides our employees with the most comprehensive benefits program to enhance their quality of life. CSG employees enjoy competitive salaries; CSG pays 90% of the PPO insurance premium for the employee; 100% for a high deductible plan, and 50% for the dependents. Both plans have reasonable deductible levels and co-pay amounts; a 401(k)-retirement match; Paid Time Off (PTO); 8 paid holidays per year; 16 hours of Paid Time Off a year for volunteer time through the Cook Career Builders program; Technician benefits that include commute time, company vehicle and gas card, quarterly bonus program, tuition reimbursement and much more! Why work at Cook Solutions Group? We know our employees are what make our business succeed. That’s why we’ve cultivated a casual, upbeat environment that enhances productivity, satisfaction, and retention. We strive to provide the best, most equitable and cost-effective benefits for employees. New employees become eligible for benefits on the first of the month following the 60-day day waiting period who work a minimum of 30 hours per week. Our employees are encouraged to take advantage of flexible scheduling, maintain a healthy work-life balance, and volunteer in their communities through our Cook Community Builders program. Equal Opportunity Cook Solutions Group is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis [“protected class”] including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform service member status; or any other protected class under federal, state, or local law.

Job Description Ready to power up your career with cutting-edge technology? ProSearch Recruiting Partners, a proud member of the esteemed MRINetwork, is on the hunt for a talented Technician to join a leading-edge industrial automation powerhouse! Imagine being part of a global family of 90 companies, driving innovation for over three decades in vital sectors like Aerospace, Oil & Gas, and advanced Manufacturing. Our client, a trusted name in quality instrumentation and process control, is eager to welcome your expertise to their dynamic team in the vibrant city of Portland. Ignite Your Potential as a Technician: As our Technician, you'll be on the front lines, ensuring peak performance and sustainability for our client's diverse customer base. Your mission will involve: • Becoming an Energy Detective: Conduct insightful energy audits on steam traps, leveraging your analytical skills to capture and translate field data into impactful reports using specialized software., • Mastering the Tools of Tomorrow: Dive into the world of precision, utilizing a range of sophisticated handheld and computer-based test equipment and calibration devices to ensure optimal functionality., • Bringing Devices Back to Life: Get hands-on with essential equipment, employing your dexterity and problem-solving abilities to open, repair, and restore devices to their full operational glory., • Decoding the Language of Automation: Immerse yourself in the intricacies of installation, operation, and maintenance manuals for a variety of critical devices, including steam traps, gas analyzers, temperature/pressure/flow instruments, and valve actuators/positioners., • Being a Meticulous Steward: Take ownership of company equipment, ensuring its upkeep and meticulously documenting all your valuable work, from daily time logs to project progress and duration. What You'll Bring to the Table: We're looking for individuals who are passionate about technology and eager to make a tangible impact. Ideally, you'll possess: • A 2-year technical degree that has equipped you with a solid foundation in the field., • A strong grasp of automation principles, metrology, calibration techniques, and flow control systems., • Exceptional communication and time management skills, essential for delivering seamless turnkey automation solutions., • Proven experience in industrial automation and motion control system design and implementation – your insights will be invaluable! Unlock a World of Rewards: Your dedication deserves to be recognized. Here's what's on offer: • Competitive hourly pay, ranging from $36 to $41, reflecting your skills and experience., • A comprehensive benefits package designed to support your well-being, including:, • Top-tier medical, dental, and vision insurance options., • A robust 401k plan with company matching to secure your future., • Generous paid vacation and holidays to recharge and enjoy life., • A clear pathway for long-term career growth and advancement within a thriving global organization. Ready to Make Your Mark? If you're a driven technician with a passion for innovation and a desire to contribute to a leading force in industrial automation, we encourage you to apply! Please note that candidates must be authorized to work in the United States without sponsorship.

Job Description Legacy Talent Search is currently seeking candidates for a CNC Machinery Field Service Technician role in Portland, OR. Our client is a well-established industry leader in precision manufacturing equipment, known for innovation and a commitment to delivering the highest quality CNC machinery and customer support. With a focus on advanced technology and continuous improvement, they pride themselves on maintaining excellence at every stage—from machine build to field installation and service. Key Responsibilities: · Install, troubleshoot, and repair CNC machinery at customer sites, ensuring optimal machine performance and minimal downtime. · Perform preventative maintenance on mechanical, electrical, hydraulic, and pneumatic systems. · Diagnose equipment issues using electrical schematics, technical manuals, and diagnostic software. · Calibrate and align machine components to factory specifications. · Provide on-site training and technical support to customers on machine operation and maintenance best practices. · Document service activities, parts usage, and detailed service reports accurately and promptly. · Collaborate with internal technical support teams to resolve complex equipment issues. · Maintain service vehicle inventory and ensure tools and diagnostic equipment are in proper working condition. · Adhere to all company and customer safety policies while working in manufacturing environments. · Travel to customer locations as required, including occasional overnight travel. Qualifications: · High school diploma or equivalent required; technical degree or certification in mechatronics, industrial maintenance, or related field preferred. · 3+ years of experience servicing CNC machines or similar industrial equipment. · Strong knowledge of CNC controls (Fanuc, Siemens, Haas, or similar), electrical systems, and mechanical troubleshooting. · Ability to read and interpret electrical and mechanical schematics. · Strong problem-solving skills and ability to work independently in the field. · Excellent communication and customer service skills. · Ability to lift up to 50+ lbs and work in industrial environments. · Valid driver’s license and clean driving record required. What We Offer: · Competitive hourly wage or salary based on experience. $37-$45 DOE. · Overtime opportunities and travel compensation. · Comprehensive benefits package, including health insurance and paid time off. · Company vehicle, tools, and technical training provided. · Opportunities for advancement within a growing organization. · A supportive and team-oriented workplace culture. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community—how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

Job Description Job Position: Service Technician Our client, a renowned company in the manufacturing and servicing of customized air compressors, vacuum systems, blowers, and controls, is looking for experienced Service Technicians. This role is crucial in maintaining the high standard of service that the company is known for. Our client offers comprehensive benefits including medical, dental, and vision insurance, along with a 7% profit sharing plan with a 3% match. Responsibilities: • Work either in the shop or field, maintaining, servicing, repairing, and installing customers’ equipment., • Prepare for the day's tasks by reviewing work orders and staging tools, parts, and other necessary equipment., • Handle customer interactions, service the equipment, and carry out pre- and post-call administrative work (work order notes, time card, inventory/parts used, etc.) using the company laptop., • Work with a team of knowledgeable technicians and contribute to the overall team knowledge.Qualifications:, • Experience working on compressors, pumps, controls, etc., • Strong mechanical background, • Self-motivated and self-directed, • Team player who can work well with a team of like-minded technical people, • Highly organized with the ability to handle the administrative side of the role, • Adheres to company culture and values, shows integrity, takes initiative to find and deliver solutions

Job Description BUILT TO CONNECT Peninsula Iron Works out of Portland Oregon, an Astec Industries brand, is looking for a field service technician. Astec is a global, manufacturing company of infrastructure development equipment. Our products range from asphalt and concrete plants, aggregate crushers and handlers, industrial heaters and more. Connection is at the heart of everything we do. We design and manufacture products used to build the infrastructure that physically connects the world, but the connections we make with people are what drive us forward. We were founded on innovation and a passion to help our customers succeed. Leveraging innovative solutions and technologies, we serve customers all over the world. We are committed to design and build the most innovative products. LOCATION: North America Various Regions and International When Needed ABOUT THE POSITION We are seeking a dynamic and customer-oriented Field Service Technician who thrives on traveling to customer sites and building strong client relationships. In this role, you will be conducting on-site troubleshooting, equipment repairs and asset health audits, ensuring our customers’ equipment is operating at peak performance. The technician ensures proper installation and operation of designated Astec products including installation, commissioning startup, training, maintenance, troubleshooting and repair. Technicians will consult with engineering to analyze and remedy problems and to train the customer employees in proper maintenance and operational tasks for maximum efficiency and customer satisfaction. Deliverables & Responsibilities · Conducts thorough assessments of customer assets, documenting equipment health, identifying potential issues, and providing actionable reports that help drive follow-up sales and service opportunities. · Maintains positive and professional attitude with customers. · Foster strong, long-term relationships with customers, becoming a familiar and reliable point of contact for all their Field Service needs. · Serve as a trusted advisor to customers, engaging directly with maintenance teams and operators to assess equipment condition and recommend proactive maintenance solutions across a large portfolio of equipment. · Apply your technical know-how to troubleshoot equipment issues, conduct repairs and support customers in understanding how to maintain their equipment effectively. · Conducts operator skills training for selected customer employees including but not limited to start up sequence, troubleshooting, electrical and mechanical basics, and control systems operations. · Accountable for proper start up, operation of all electrical, electronic/control systems, and mechanical components, proper sequencing/Interlocking, and proper calibration, and applications of each of these systems · Generates written field service reports for daily activities; submit reports as required. · Coordinate and communicate with Astec sales, engineering, and manufacturing groups for product or process issues, including warranty, design recommendations, and reporting of any/all damage to equipment during shipment or installation. · Work closely with the Functional Leadership, Product Support Managers, and Office Support Staff to ensure accurate service reports, and associated billing. · Be available for emergency dispatch; 7 days a week, 24 hours a day to support our customers and staff. To be successful in this role, your experience and competencies are: · High school diploma or general education degree (GED); Technical Certification; or a combination of education and experience equivalent as deemed sufficient by management. · Proven experience as a field service technician or similar role in industrial equipment or heavy machinery environments. · Knowledge of electrical and electronic circuits. · Ability to read and understand mechanical, electrical, and electronics blueprints and designs. · Knowledge of circuitry, pneumatic, hydraulic, and other power transmission equipment · Willingness and ability to travel extensively domestically and internationally at a moment's notice. · Excellent communication skills, both oral and written · Basic arithmetic skills, computer skills (Windows, Microsoft Office, Concur, and Other Software) · Strong analytical skills · Ability to weld, with a stick and certain types of wire welding (MIG), use of a cutting torch, knowledge of steel fabrication, assembly, and modifications. · Capable to manage conflict and resolve issues most positively for all parties concerned. · Experience in working alone, or in a small group and being comfortable with independence on the job. · Maintain positive, cooperative working relationships by working, acting, and communicating with various personalities getting along with customers, vendors, co-workers, and management working both individually and as part of a team. · Written communication, technical reports, and logbooks must be at a high level of proficiency. Ability to stay productive with little supervision. Supervisor and Leadership Expectations None Our Culture and Values Employees that become part of Astec embody the values below throughout their work. · Continuous devotion to meeting the needs of our customers · Honesty and integrity in all aspects of business · Respect for all individuals · Preserving entrepreneurial spirit and innovation · Safety, quality and productivity as means to ensure success Travel Requirements: All Field Service Technician tiers are 100% of travel, regional, international. These roles will require extensive travel and overtime, including nights, weekends, and holidays. WORK ENVIRONMENT Manufacturing Environment Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EQUAL OPPORTUNITY EMPLOYER As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

Job Description Legacy Talent Search is currently seeking candidates for a Label Line / Labeling Technician role in Vancouver, WA. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest quality products. With a focus on operational efficiency and continuous improvement, they take pride in maintaining accurate labeling processes and ensuring product integrity at every stage of production. Key Responsibilities: · Operate, monitor, and maintain labeling equipment to ensure accurate and efficient product labeling. · Set up and adjust labelers, printers, and related equipment for different product runs and packaging formats. · Conduct routine inspections and quality checks to verify label accuracy, placement, and compliance with company and regulatory standards. · Troubleshoot and resolve minor mechanical or operational issues with labeling machinery. · Perform line changeovers, adjustments, and basic preventative maintenance on labeling equipment. · Ensure labeling materials such as labels, ink, and ribbons are stocked and properly loaded for production runs. · Maintain accurate production and quality records related to labeling operations. · Work closely with production and quality teams to ensure labeling meets product specifications and regulatory requirements. · Follow all company safety policies and maintain a clean and organized labeling area. · Promptly report equipment issues, quality concerns, or safety hazards to supervisors. Qualifications: · High school diploma or equivalent; technical training or experience in manufacturing or packaging is preferred. · Previous experience operating labeling equipment or working in a production or packaging environment is a plus. · Strong attention to detail to ensure labeling accuracy and product compliance. · Basic mechanical aptitude and troubleshooting ability. · Ability to lift up to 50+ lbs and stand for extended periods in a fast-paced production environment. · Strong organizational and documentation skills. · Excellent teamwork, communication, and collaboration skills. · Flexibility to work varying shifts, including evenings and weekends, as required. What We Offer: · Competitive hourly wage. · Comprehensive benefits package, including health insurance and paid time off. · Opportunities for growth and advancement within the company. · A supportive and inclusive workplace culture. · The opportunity to contribute to a company committed to quality, accuracy, and operational excellence. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community—how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

Job DescriptionResponsibilities: • Outgoing Quality Control (OQC) inspection for Internet Gateway (ONU) devices, • This is a 100% inspection of the initial production lot (270 units)., • The QE must independently execute the client-provided OQC procedure, • Inspector must be capable of performing all functional testing steps without reliance on factory engineering staff., • Scope includes:, • Functional testing using a dedicated workstation, • Ethernet port validation (100M / 1G / 10G), • PON port connectivity verification, • Basic WAN/LAN configuration and IPv6 ping testing, • Web UI verification and command-line operations, • Cosmetic inspection per client-defined A/B/C surface criteria, • Packaging and labeling verification, • Photo documentation and formal reporting per client requirementsTechnical Qualifications:, • Minimum 5+ years in telecom / networking / electronics functional testing, • Strong IT / Systems Engineering background, • Experience with network device functional testing (ONU, gateways, routers), • Hands-on experience with Ethernet (100M / 1G / 10G) port testing, • Experience with PON / EPON / 10G-EPON environments preferred, • Ability to perform WAN/LAN configuration and IPv6 ping testing, • Comfortable using command-line interfaces and Web UI verification, • Familiar with optical fiber handling and port validation, • Able to execute client OQC procedures independently., • IT / Networking related certification preferred (e.g., CompTIA Network+, CCNA, or equivalent experience), • Electrical / Electronics Engineering degree preferred, • No mandatory certification required if experience is demonstratedIndustry Experience:, • 1-3 years basic quality inspection experience in Electronics Technician / Quality Inspector / IT Hardware Technician., • Telecommunications equipment manufacturing, • Internet gateways / ONU / router production, • Electronics manufacturing with functional testing, • OQC / Final Quality Control inspections for network devices.Job Type: 1099 Contractor Project Duration: • CURRENT PROJECT: 3 Man-Days (estimated), • Note: This is a 1099 contract role project duration may vary based on client needsShift Hours:, • CURRENT PROJECT: Standard production hours (8 hours per day exact timing TBD with factory., • Note: As a 1099 contractor, project schedules may vary depending on site availabilityLocation:, • Must be able to travel to Vancouver, WA 98682, USA and nearby areas (exact CLIENT address can ONLY be shared once contractor joins)

Job Description Qualifications: Basic Qualifications • High school diploma or GED, • 8+ years of AutoCAD design experience, • 4+ years of Revit design experience, • 5+ years of industrial building mechanical design experience, • Strong working knowledge of U.S. Mechanical Codes, specifically the International Mechanical Code (IMC)., • Experience in complex industrial environments such as semiconductor manufacturing, cleanrooms, data centers, or other advanced manufacturing facilities., • Ability to work effectively within multidisciplinary teams, • Technical or Associate's degree in a relevant discipline, • Strong communication skills (verbal and written), • Advanced problem-solving, planning, and analytical skills We're looking for a Senior HVAC Design Technician who can step in and contribute immediately. In this role, you'll collaborate with multidisciplinary design and engineering teams to lead the development of complex industrial HVAC and Process Exhaust systems for advanced facilities. You will be responsible for: • Lead design, layout, and routing of industrial building mechanical systems, • Develop P&IDs, plans, sections, and construction details, • Perform design tasks across planning, concept, and detailed design, • Coordinate directly with clients, contractors, and internal disciplines

Job DescriptionResponsibilities: • Outgoing Quality Control (OQC) inspection for Internet Gateway (ONU) devices, • This is a 100% inspection of the initial production lot (270 units)., • The QE must independently execute the client-provided OQC procedure, • Inspector must be capable of performing all functional testing steps without reliance on factory engineering staff., • Scope includes:, • Functional testing using a dedicated workstation, • Ethernet port validation (100M / 1G / 10G), • PON port connectivity verification, • Basic WAN/LAN configuration and IPv6 ping testing, • Web UI verification and command-line operations, • Cosmetic inspection per client-defined A/B/C surface criteria, • Packaging and labeling verification, • Photo documentation and formal reporting per client requirementsTechnical Qualifications:, • Minimum 5+ years in telecom / networking / electronics functional testing, • Strong IT / Systems Engineering background, • Experience with network device functional testing (ONU, gateways, routers), • Hands-on experience with Ethernet (100M / 1G / 10G) port testing, • Experience with PON / EPON / 10G-EPON environments preferred, • Ability to perform WAN/LAN configuration and IPv6 ping testing, • Comfortable using command-line interfaces and Web UI verification, • Familiar with optical fiber handling and port validation, • Able to execute client OQC procedures independently., • IT / Networking related certification preferred (e.g., CompTIA Network+, CCNA, or equivalent experience), • Electrical / Electronics Engineering degree preferred, • No mandatory certification required if experience is demonstratedIndustry Experience:, • 1-3 years basic quality inspection experience in Electronics Technician / Quality Inspector / IT Hardware Technician., • Telecommunications equipment manufacturing, • Internet gateways / ONU / router production, • Electronics manufacturing with functional testing, • OQC / Final Quality Control inspections for network devices.Job Type: 1099 Contractor Project Duration: • CURRENT PROJECT: 3 Man-Days (estimated), • Note: This is a 1099 contract role project duration may vary based on client needsShift Hours:, • CURRENT PROJECT: Standard production hours (8 hours per day exact timing TBD with factory., • Note: As a 1099 contractor, project schedules may vary depending on site availabilityLocation:, • Must be able to travel to Vancouver, WA 98682, USA and nearby areas (exact CLIENT address can ONLY be shared once contractor joins)