Trabajos manufacturing technician en Jersey City, New JerseyCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level B performs independent diagnostics, repairs, and preventive maintenance on MRF processing equipment while mentoring Level C technicians and supporting safe, reliable operations. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues., • Perform PM inspections and corrective maintenance to standard., • Document work accurately in the CMMS., • Support outages, vendor work, and equipment installations., • Follow all safety, LOTO, and PPE requirements., • Mentor Level C technicians and reinforce safe work practices. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years of hands-on maintenance experience., • Proficiency with mechanical systems and PM execution., • Ability to read service manuals and schematics. Preferred: • Experience in industrial maintenance, manufacturing, processing, recycling, municipal utilities, or material-handling systems., • Welding and fabrication skills. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level A is the senior technical expert responsible for advanced diagnostics, complex repairs, and technical leadership across all MRF processing equipment. This role sets the standard for safety, workmanship, and reliability while mentoring lower-level technicians. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Advanced Diagnostics & Repair • Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues., • Perform major component rebuilds, overhauls, and precision alignment on critical processing equipment, • Serve as the technical lead on shift and mentor Level B and C mechanics., • Verify quality of repairs, PM execution, and documentation., • Execute and refine PM tasks; recommend changes to intervals and procedures., • Help plan daily plant maintenance workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating repair options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the plant. Requirements and Qualifications::, • High school diploma or GED required., • 5+ years of industrial, fleet, or processing maintenance experience with demonstrated mastery of mechanical systems., • Strong welding and fabrication capability., • Proven ability to work independently and lead complex repairs. Preferred: • Experience as a senior technician or millwright in recycling, industrial maintenance, manufacturing, processing, aggregate, or material-handling environments., • OEM training on balers, conveyors, or processing systems. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Field Service Blow Mold Machinery - Passaic, NJ Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands _. Requires Field Service Engineer with experience on Blow Mold and track record installing, repairing, troubleshooting, and maintenance for new and prior installs of custom Bottle Molding Machinery. Activities: • Join and support commissioning team in field for customer machinery installation projects. • Train end users on start up, operation and shut down procedures. • Recommend after-sale parts and components to compliment production line set up and manufacturing capabilities. • Conduct follow-up visits for preventative and escalated maintenance issues. Experience: • 3+ years troubleshooting and repairing industrial manufacturing machinery and auxiliary equipment. • Track record with servo motion systems in machines. • Ability to use electrical, pneumatic and hydraulic diagrams and schematics to diagnose problems in Computer Controlled machinery. • Hands-on experience setting up and operating programable controls including updating software. • Re-routing three phase wiring for new product line requirements. Excellent hourly compensation and generous overtime rates, end of year bonus, full medical, dental and vision benefits, matched 401(k), almost no weekend requirements. Employee perks include tuition reimbursement, travel reimbursement, paid training and paid time off for personal days, sick days, and vacations, company pays for holidays. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #43042NJ454 when responding. Diedre Moire Corporation Education Requirements: High School Minimum Experience Requirements: 2-5 years Job City Location: Passaic Job State Location: NJ Job Country Location: USA Salary Range: $80,000 to $140,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #fieldservicejobs #technicianjobs #MaintenanceMechanicJobs #PlasticJobs #BlowMoldingJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499.

Job Description MIH Systems Group is a growing company in the evolving field of building commissioning, and we strive to make buildings work better. Specializing in the optimization of complex building systems, our team's diversified skill set provides value to our clients from the design stages of new construction all the way through operating existing buildings. Our consulting group provides a full array of commissioning services for both new and existing buildings, and our technical services group provides start-up services on complex HVAC equipment from a wide range of manufacturers. The MIH team consists of experienced industry-leading professionals, focused on logistical, energy and cost-effective solutions to our clients. The HVAC Service Technician specializes in the start-up and service of equipment for a variety of applications of air-conditioning, heating, ventilation, humidity control and energy management. We are searching for both experienced and entry-level HVAC technicians to help support the growing service business. The candidate must be able to troubleshoot and repair HVAC systems, be dependable and have good customer service skills. This role would service our NYC Metro area. Requirements: * 5+ years of solo field experience with commercial heating and air conditioning. (Journeyman) * Must have knowledge of commercial air-conditioning, heating, water source heat pumps & rooftop packaged HVAC systems. * Advanced knowledge of refrigeration. * Controls background a plus. * Manufacturing representative a plus. * EPA certification * MUST have a clean driving record. Estimated Salary: $60/hr - $70/hr, with flexibility based on experience and skills. MIH Systems Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. You should be proficient in: • Refrigeration Systems, • HVAC Service & Installation

Job description: Job Title: Field Service Technician Category: Full-Time, Regular | Travel: Up to 100% Position Summary The Field Service Technician I serves as the primary on-site technical representative for a global leader in Plastics manufacturing Industry. This role requires extensive travel to perform installation, preventative maintenance, and emergency repairs on high-speed packaging machinery. The technician acts as a vital communication link between the client and the corporate engineering and project management teams. Key Responsibilities • Technical Support: Perform hands-on mechanical, electrical, and pneumatic troubleshooting. Study complex schematics and blueprints to diagnose and resolve equipment failures., • Installation & Commissioning: Lead the assembly, leveling, and power-up of new machinery at client sites. Perform quality inspections and ensure equipment meets performance specifications., • Client Training: Coach onsite operators and maintenance staff on machine functionality, safety protocols, and changeover procedures for different product formats., • Documentation: Complete detailed service reports, expense claims, and equipment acceptance forms within established deadlines. Audit spare parts inventory and recommend necessary orders to minimize downtime., • Collaboration: Interface with internal Engineering, Production, and Parts departments to resolve persistent technical issues or project-specific hurdles. Requirements & Qualifications • Education: Associate’s Degree in Electronics, Mechatronics, or a professional certificate in an industrial trade., • Experience: 2+ years of experience in the maintenance or service of automated equipment, preferably within the food, beverage, chemical, or industrial manufacturing sectors., • Technical Skills: Proficiency with hand tools, precision measuring instruments, and diagnostic software. Mastery of MS Office (Word, Excel, Outlook) for professional reporting., • Communication: Ability to maintain a professional demeanor under pressure and communicate effectively with international personnel and diverse management teams., • Logistics: Must possess a valid driver’s license and a clean driving record. Ability to manage complex travel itineraries and provide on-call support during weekends or emergencies. Physical Demands & Work Environment • Physicality: Regularly required to stand, kneel, and crawl in tight spaces. Must be able to lift up to 50 lbs and distinguish color-coded wiring., • Environment: Work is performed in active production facilities with exposure to moving mechanical parts, loud noise levels, and occasional electrical hazards., • Safety: Strict adherence to Lockout/Tagout (LOTO) procedures and the use of PPE (safety glasses, hearing protection, etc.) is mandatory. In addition to the Base, the position has the following benefits: • OT after 8 hours a day, • Per Diem of $75 a day, no receipts needed, • Incentive Program for Parts or Upgrades sold, • Standard perks such as mileage for personal car driven (seldom), loyalty programs kept by tech such as airlines, hotels, rental cars, etc.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance, and we make factories run better. Principal Duties/Responsibilities: To Live and Lead Safety · Takes responsibility for employee safety and wellness by deploying the ATS safety program and ensuring effective completion of safety training, observations, and incident investigations. · Implements and actively supports all Beyond Zero initiatives · Enables the growth of a customer safety culture by a fostering a safety partnership and sharing best practices To Inspire and Provide Clarity on Vision and Strategy · Motivates employees by communicating a clear vision that enables all employees to understand the rationale for, and the benefit of, both site-level and company-wide objectives · Acts as an effective change agent, leading the implementation of strategic initiatives through positive team communications, appropriate action planning, and successful implementation activities · Understands and appropriately articulates both ATS and customer strategies, providing the team with line of sight between team responsibilities and strategic outcomes To Own Our ATS Culture · Builds positive relationships with ATS employees, customers, and peers through open communication and role-modeling the ATS leadership core competencies of honesty and respect · Sets a positive, influential standard for others and creates a constructive climate for their team · Influences with transparency and use participative methods to ensure that decisions are understood and accepted · Establishes a positive work environment through managing and personalizing onboarding; engaging in ongoing one-on-one communications; and recognizing individual contributions and achievements on a timely basis · Adheres to policies and procedures and ensures that staff understands the rationale behind policies and processes To Support Our Employees’ Learning and Growth · Leads and builds team capabilities by working with individuals on performance improvement, career planning, training, and skills development. · Develops, communicates, and executes a Skills Matrix and Technician Training Plan · Builds and maintains a succession plan for key positions (i.e., Supervisors, Supply Chain, P/S, RE) To Ensure and Drive our Business Results · Leads and ensures the Operating System is understood, reinforced, and embedded · Develops and executes a site-specific maintenance plan per ATS standards · Manages financial performance of the site (revenue, expenses, and profit) to achieve set objectives · Develops and maintains effective relationships with all ATS business units, fully utilizing their services and ensuring cross-functional alignment · Collaborates with and builds customer relationships to ensure priority alignment and proactively anticipates customer needs as the primary on site contact · Ensures alignment of customer expectations and ATS site goals through management of site-specific contracts · Communicates with the customer through daily, weekly, and monthly meetings and conducts a regular review of the performance metrics with the customer · Drives a continuous improvement methodology and promotes cost savings · Analyzes and reports on key performance indicators, completing root cause analyses and developing and executing action items while removing barriers and addressing issues · Collaborates with sales and operations leadership to increase the scope of services Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor’s degree in technical, business, or a related field preferred or seven years of operations / maintenance experience · Three years of supervisory experience with a strong focus on development of employees · Resilient and flexible, able to multitask and prioritize with an innate ability to understand and accept change and motivate others around change · Highly tuned emotional intelligence with demonstrated ability to build relationships and lead teams with honesty and integrity to achieve goals · Solid understanding of manufacturing / assembly work environment · Business acumen · Positive influencer with appropriate levels of organization. · Strong customer focus with the ability to build positive business relationships and show a sense of urgency Desirable KSAs · Manufacturing maintenance experience preferred with related certifications and training · Good understanding of, and/or experience with, proactive/reliability maintenance processes, i.e., Planning/Scheduling, P/M, PdM, and root cause analysis, and continuous improvement methodologies · Good computer skills, including Microsoft applications and web-based applications such as Power BI, GEAC, Concur, Workday and related software · Time management skills · Ability to relocate to specified locations · Excellent communications skills (verbal, written, and presentation) · Agile, curious learner and authentic, credible teacher · Financial acumen and knowledge of forecasting and managing budgets Leadership Core Competencies: Business and Company Acumen Lead with honesty and integrity Build bold and relevant strategies Welcome and motivate change Recognize the right outcomes and how they were achieved Role model safety and wellness Emotional Intelligence Provide psychological safety Be self-aware Build relationships Ask for and act on feedback Respect diverse background and viewpoints Lead in the Present; Eye to the Future Commit to accountability Coach people to their potential Own talent development and placement Turn problems into opportunities Be resilient and flexible Communicate, Communicate, Communicate Practice transparency Build relationships through respect Be a curious learner and credible teacher Influence in a proactive, positive way Ensure cross functional awareness/decisions ATS is committed to providing equal employment opportunity in all aspects of employment to all applicants and employees, regardless of age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information or other legally protected status.

Position R&D Regulatory Compliance (Entry level) Department R&D Classification Non-Exempt Reports to Director of R&D and Technical Sales Job type Full-time (on-site) Job Summary This role combines regulatory compliance and hands-on product development within a fast-paced food manufacturing environment. You will support food labeling compliance while also assisting in the creation of innovative seasoning blends alongside the R&D team. Responsibilities include reviewing and preparing product labels and documentation to ensure compliance with FDA, USDA, and international regulations, as well as maintaining accurate records and supporting audits. This is a hands-on, non-routine role ideal for a detail-oriented and motivated individual eager to gain real-world experience in both regulatory compliance and food product development. You’ll collaborate with cross-functional teams and play a key role in bringing new food products from concept to market. Key Responsibilities: • • Assist in creating and reviewing product labels and specifications, • • Ensure compliance with food regulations and customer requirements, • • Support documentation for domestic and international products, • • Research regulations and help resolve labeling questions, • • Work with cross-functional teams (marketing, operations, etc.), • • Maintain accurate records and support audits or compliance checks, • • Help improve internal processes and compliance procedures What We’re Looking For • • Basic knowledge of food labeling regulations (FDA, USDA, and international), • • Strong research and problem-solving skills, • • Detail-oriented with good organization and time management, • • Able to handle multiple tasks and adapt in a fast-paced environment, • • Good communication and teamwork skills, • • Proficient in Microsoft Office (Excel, Word, PowerPoint), • • Bachelor’s degree in Nutrition, Food Science, or related field, • • Some experience or internship in food labeling or regulatory work preferred Why This Role Stands Out This is a rare opportunity to break into the food industry in a meaningful way. You won’t just observe—you’ll actively contribute, learn rapidly, and gain hands-on experience that can accelerate your career. We are looking for individuals who are ready to work hard, stay curious, and grow. Work Location: 1835 Burnet Ave, Union NJ 07083 Compensation/ Benefits • • Competitive base and bonus, • • 401k, • • Medical, Dental, Vision, • • Life Insurance and AD&D, • • 12 Holidays, • • 7 Flexible days, • • 10 Vacation Days and more This is an excellent opportunity to kick-start your career in the field of culin ry research and development. If you are enthusiastic, reliable, and excited about contributing to the creation of unique and flavorful seasoning blends, we encourage you to apply for the Seasoning Blending Lab Technician position." Our Motto: One Team – One Goal The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Furthermore, they do not imply or establish a contract for employment and are subject to change at the discretion of the employer. EEO Statement: Kalustyan Corporation and its subsidiaries is an equal opportunity employer which does not discriminate on the basis of race, color, sex, sexual or affectional preference, gender, sexual orientation, gender identity or expression, religion, creed, ancestry or national origin, age, disability, marital or domestic status, veteran status, genetic information, atypical hereditary cellular or blood trait, or any other protected class. This policy applies to all employment actions including but not limited to, recruitment, selection, training, promotion, transfer, layoff, termination, and job-related social or recreational programs. If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact inormation Requests for accommodations will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address.

Great opportunity to join an industry leading manufacturing company focused on delivering dynamic solutions to the steel and iron industry This Jobot Job is hosted by: Matt Tassoni Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $22 - $25 per hour A bit about us: Our client is an industry leading manufacturing company focused on dynamic products for the steel and iron manufacturing space! Why join us? Medical Dental Vision PTO Growth potential Job Details ob Summary: We are seeking a reliable and hands-on Service Technician to support preventative maintenance, facility upkeep, and general operational needs within our facility. This role is responsible for performing routine maintenance, assisting with equipment and building repairs, and supporting day-to-day operational tasks to ensure a safe and efficient work environment. Key Responsibilities: Perform scheduled preventative maintenance on equipment and facility systems. Assist with basic repairs and troubleshooting of mechanical, electrical, and facility-related issues. Conduct routine inspections of equipment, tools, and building infrastructure to identify maintenance needs. Complete general facility maintenance tasks including lighting, minor plumbing, painting, and basic carpentry. Support general labor tasks such as moving materials, equipment setup, and facility organization. Maintain maintenance logs and report completed work or identified issues. Follow company safety policies and maintain a clean and organized work environment. Assist other departments with maintenance or operational needs as required. Qualifications: Previous experience in maintenance, facilities, or service technician roles preferred. Basic knowledge of mechanical systems, hand tools, and maintenance procedures. Ability to troubleshoot minor equipment or facility issues. Strong work ethic with the ability to work independently and as part of a team. Ability to lift up to 50 lbs and perform physical tasks as needed. Preferred Skills: Experience with preventative maintenance programs. Basic electrical, plumbing, or mechanical repair experience. Forklift or equipment operation experience is a plus. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Kanadevia Inova (KVI) is a global market leader in energy from waste (EfW) and renewable gas. KVI acts as an engineering, procurement and construction contractor and project developer, delivering complete turnkey plants and system solutions for thermal and biological EfW recovery. KVI’s Service Group combines its own research and development with comprehensive manufacturing and erection capabilities to support our clients throughout the entire life cycle of their plant. This position will work remotely and may be located in Rhode Island, Virginia/Pennsylvania or Tampa, FL area. The Foreman is responsible for supervising and executing on-site service tasks for mostly Categories 4 (mechanical retrofit projects) and 5 (MRO services) service works, including the assembly, installation, maintenance, adjustment, and troubleshooting of mechanical systems. This role ensures that work is performed in accordance with contractual, QHSE, and technical requirements while maintaining effective communication with internal teams and clients. Additionally, the position involves coordinating resources, managing tools and equipment, and upholding site safety and efficiency. Operational Execution & Technical Support: • Execute assembly, installation, maintenance, and adjustment operations on mechanical systems in line with technical documentation and project requirements., • Inspect equipment, identify technical or contractual deviations, and report issues to the Site Manager or Project Manager., • Perform troubleshooting operations and implement corrective actions to resolve technical difficulties., • Oversee the delivery, setup, and proper handling of materials, equipment, and machinery on-site., • Supervise site workers and coordinate daily site operations to ensure optimal performance and adherence to project deadlines., • Organize site layout and setup based on reviewed scopes and plans, ensuring smooth workflow., • Conduct safety briefings for temporary staff and subcontractors, reinforcing QHSE regulations on-site., • Facilitate effective communication between internal teams (Site Support, Design Office, HSE Manager) and external stakeholders (client representatives, suppliers, subcontractors)., • Ensure strict adherence to QHSE (Quality, Health, Safety, and Environment) standards, internal policies, and external regulations., • Monitor site safety practices and compliance, addressing non-conformities and enforcing corrective actions., • Relay essential project updates and safety information to the Site Supervisor, Field Service Group Leader, and Account Manager throughout the project lifecycle., • Document site activities, including safety reports, time tracking, and deviations, ensuring proper traceability. · Timely completion of site tasks and adherence to project deadlines. · Compliance with QHSE standards and internal procedures. · Effective resolution of technical issues and deviations. · Positive feedback from internal teams and clients regarding site management and communication. · Efficient management and availability of tools and consumables. Qualifications & Experiences: • Vocational qualifications, technician certificate, or relevant experience in boiler-making, or mechanics., • 2+ years in mechanical assembly, maintenance, or site supervision within an industrial or maintenance environment., • Possession of relevant local safety certifications., • Ability to read and interpret industrial plans, • Working knowledge of mechanics, welding and hydraulics., • Experience in the maintenance of waste incineration plants, • Basic knowledge of boiler construction, • Understanding in reading plant design drawings, • Basis Knowledge of the local language, Good command of English; another language is a plus. Personal Attributes: • Strong awareness of QHSE (Quality, Health, Safety, and Environment) management system and commitment to safe work practices., • Solution-oriented, proactive, and reliable., • Excellent communication skills with the ability to effectively present ideas and relay information., • Detail-oriented with a high degree of vigilance to detect and report abnormal situations., • Strong leadership and team coordination capabilities, maintaining team cohesion and motivation. We Offer: • Responsible challenge with diversified field of activity, • Team-oriented working atmosphere in an international Company, • Personal development opportunities through own Inova Academy, • Opportunity to gain an insight into various technical disciplines, • Excellent employment conditions, • Attractive working place (central, good transport links) In accordance with the Americans with Disabilities Act, it is possible that requirements may be modified to reasonably accommodate the physical and mental limitations of an employee or an applicant. However, no accommodations will be made which may pose serious health safety or environmental risks to the employee or others or which impose undue hardships on the organization. Statement regarding Equal Employment Opportunity Equal Opportunity Employer, all applicants will be considered for employment without regard to age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation or status with regard to public assistance. Note: This job description is not intended to fully and completely describe all duties of the position. Other duties not specifically described herein may be required from time-to-time or as required. For HR agencies: Please note that we do not accept applications coming from agencies. Thank you.

Job Description MIH Systems Group is a growing company in the evolving field of building commissioning, and we strive to make buildings work better. Specializing in the optimization of complex building systems, our team's diversified skill set provides value to our clients from the design stages of new construction all the way through operating existing buildings. Our consulting group provides a full array of commissioning services for both new and existing buildings, and our technical services group provides start-up services on complex HVAC equipment from a wide range of manufacturers. The MIH team consists of experienced industry-leading professionals, focused on logistical, energy and cost-effective solutions to our clients. The HVAC Service Technician specializes in the start-up and service of equipment for a variety of applications of air-conditioning, heating, ventilation, humidity control and energy management. We are searching for both experienced and entry-level HVAC technicians to help support the growing service business. The candidate must be able to troubleshoot and repair HVAC systems, be dependable and have good customer service skills. This role would service our NYC Metro area. Requirements: * 5+ years of solo field experience with commercial heating and air conditioning. (Journeyman) * Must have knowledge of commercial air-conditioning, heating, water source heat pumps & rooftop packaged HVAC systems. * Advanced knowledge of refrigeration. * Controls background a plus. * Manufacturing representative a plus. * EPA certification * MUST have a clean driving record. Estimated Salary: $60/hr - $70/hr, with flexibility based on experience and skills. MIH Systems Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. You should be proficient in: • Refrigeration Systems, • HVAC Service & Installation

Job Description Staff Management Group is seeking a Beverage Packaging Technician for our client in Hillside, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 1st Shift: 6AM – 2:30PM, • 2nd Shift: 2:30PM – 10:30PM, • 3rd Shift: 10PM – 6:30AM, • Plus Overtime, • 6-day rotating schedule, with shifts assigned on any day of the week Pay Rate: • $25 / hour Job Summary: We’re hiring Packer Technicians for all shifts. In this hands-on role, you’ll operate and maintain KHS, SMI, and Douglas packers to keep production running smoothly. From troubleshooting equipment to ensuring product quality and safety, you’ll be at the heart of our packaging operations. Join us and take your mechanical skills to the next level in a fast-paced, team-driven environment. Job Responsibilities: • Operate and monitor packaging machines to ensure consistent production flow., • Execute equipment changeovers and startups with precision, safety, and efficiency., • Diagnose and resolve mechanical or operational issues to minimize downtime., • Perform preventive maintenance (PM) and carry out basic equipment repairs., • Inspect product quality regularly and report deviations immediately., • Maintain a clean, organized, and compliant work area in line with GMP and safety standards., • Collaborate with maintenance and production teams to enhance performance and reduce downtime. Job Requirements: • Prior experience with KHS, SMI, or Douglas packers strongly preferred., • Solid mechanical aptitude and troubleshooting skills required., • Proven ability to work independently while contributing effectively in a team environment., • Flexibility to work various shifts or hours as needed., • Commitment to following all company safety protocols and GMP policies., • Full availability and flexibility are required. Additional Information: Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job DescriptionJob Title: Facilities Maintenance Technician - Building Engineer Location: Newark. NJPay: $34/hrType of Placement: Direct HireShift: Must be open to start Job Description The Facilities Maintenance Technician will be responsible for the daily maintenance and repair of building facilities. This includes work on elevators, conveyor systems, mechanical systems, lighting systems, communication/radio systems, air handling/HVAC units, fire systems, plumbing systems, and more. Technicians may also work with PLC electronic systems, computer controls, and steel frame structures. Responsibilities • Perform maintenance and repair tasks on various building facilities including elevators, conveyor systems, and HVAC units., • Work with communication and radio systems, fire systems, and plumbing systems., • Engage in high and low voltage electrical repairs, including installation and repair of 110/220/480 volt single and multiphase electrical circuitry., • Read and follow wiring schematics for industrial wiring tasks., • Thorough knowledge of general building maintenance with an emphasis on electrical systems., • Experience in electrical troubleshooting including AC & DC circuits and high voltage (480) repairs., • Experience in industrial maintenance, electrical maintenance, and preventive maintenance., • Ability to read and follow wiring schematics., • Experience in electronics diagnostics and troubleshooting., • Valid, clean, applicable state driver's license. Enjoy a $10,000 sign-on bonus with half paid after 30 days and the other half after 12 months. Benefit from yearly pay increases, reaching up to $60.00 an hour after 8 years. Experience extremely competitive benefits. Work Environment The work environment includes both indoor and outdoor settings at airport terminals. Be prepared to work on a flexible schedule that covers all shifts, including weekends and holidays. Schedules are bid and awarded based on seniority. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $71802.00 - $71802.00/yr. We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). See attached SOP. Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 22, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Staff Management Group is seeking a Packing Mechanic Technician for our client in Hillside, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 3rd Shift: 10PM - 6:30AM Pay Rate: • $25 / hour Job Summary: The Packaging Mechanic Technician is responsible for operating, monitoring, and maintaining packaging machinery to ensure smooth and efficient production. This role requires strong mechanical troubleshooting skills, experience with equipment such as KHS, SMI, or Douglas packers, and a commitment to safety and GMP compliance. The ideal candidate is bilingual, dependable, and able to support both production and maintenance teams in a fast-paced environment. Job Responsibilities: • Operate and monitor packaging machines to ensure consistent production flow., • Execute equipment changeovers and startups with precision, safety, and efficiency., • Diagnose and resolve mechanical or operational issues to minimize downtime., • Perform preventive maintenance (PM) and carry out basic equipment repairs., • Inspect product quality regularly and report deviations immediately., • Maintain a clean, organized, and compliant work area in line with GMP and safetystandards., • Collaborate with maintenance and production teams to enhance performance andreduce downtime. Job Requirements: • MUST be bilingual - English AND Spanish, • At least 3 years of prior experience with KHS, SMI, or Douglas packers strongly preferred., • Solid mechanical aptitude and troubleshooting skills required., • Proven ability to work independently while contributing effectively in a team environment., • Flexibility to work various shifts or hours as needed., • Commitment to following all company safety protocols and GMP policies Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company car, • Free uniforms, • Flexible schedule, • Opportunity for advancement, • Training & development Do you enjoy making things and using your hands? Have hobbies that involve color or 3-D art? Like finding ways to be creative in different areas? Becoming a Surface Experts Technician could pair your interests perfectly with your job! Take advantage of an artistic outlet as your work creatively to complete repairs, usually in an hour or less. A Day in the Life of a Surface Experts Technician: DUTIES: In the Field Daily • Complete 4 or more creative repairs on-site each day, • Perform work on-location while displaying good customer service and communication, • Problem-solve with repairs in a variety of settings like apartments, hotels, moving sites, construction sites, etc., • Ride a company provided e-cargo bike (like Amazon's latest last-mile delivery vehicles) to jobs to avoid traffic, parking, and the subway.Customer Service and Communication, • Treat tenants and staff with exceptional customer service, • Update progress on repairs by entering information and notes on our CRM/Dispatch tool, • Problem-solve alongside our designated Support Team for any issueFollow Repair Process, • Learn and integrate our one-of-a-kind 5-step process into your creative routine, • Master each instrument and tool in your personalized tool-kit, • Flex your artistic talents each repair requires a unique solutionCalling all artistic types! Technicians with backgrounds in painting, sculpting, whittling, drawing, and other visual arts of various mediums can excel at Surface Experts. Your talent with color is vital in matching colors and patterns for complex repairs. Every repair has a different design, sheen, and material, so creativity is a must. QUALIFICATIONS • Willingness to learn and being coachable are the most important requirements., • Hands-on experience doing some form of manual work from construction and manufacturing to painting or sculpting., • A background in some form of facilities maintenance is helpful but not a must., • Must be able to see, distinguish, and replicate colors familiarity with colors and color matching is integral to our process., • Must be able to travel 1 week off-site for training.ABOUT SURFACE EXPERTS Surface Experts is a comprehensive hard surface repair company. We can fix minor damages to many surfaces including Bathtubs, Cabinets, Floors, Appliances, Countertops, Furniture, Elevator Panels you name it! • By combining traditional trades with our own original processes and products, we are able to provide long-lasting repairs that are pleasing to the eye. And all with a smile!, • Our competitors need to resurface entire areas or fully replace even damage only a few inches wide! We can repair those small spots. Our goal is a happy customer who has saved money and time while avoiding adding another damaged surface to the landfill., • Our typical repair doesnt make a mess, doesnt leave a smell, and doesnt take more than 2 hours. Technicians usually need only a tablespoon or two of product, meaning they can carry everything with them in a small truck or car!VISION, • To establish and lead a nationally recognized market for surface repair as an alternative to replacement or complete refinishing., • Our goal is to be represented in every major metropolitan area, and for our brand to be synonymous with spot repair among all facilities and maintenance management.MISSION, • Our mission is to develop outstanding teams by investing in strong relationships., • Together, we work to solve our customers problems by reducing the waste of time, money, and materials that end up in landfills.VALUES, • Serve Others, • Put Relationships First, • Be Kind, • Be Humble, • Be a Problem Solver, • Be Curious, • Seek to Understand the Cause of the Problem, • Work Smart, • Constantly Improve, • Trust the Process, • Be Organized, • Be Teachable, • Put Business Needs Above Personal Wants

Title: EHS Manager Department: Health and Environmental Safety Reports To: Director, Environmental Health and Safety Position Type: Staff Position Summary: Providing a safe and healthful work environment for NJIT students, faculty, staff, and guests is a core value of the department. Similarly, achieving a high level of compliance with the numerous Environmental Health and Safety (EHS) regulations, guidelines, statutes, and standards is a priority. As the NJIT research portfolio has expanded in recent years, and new faculty hires have implemented more complex research initiatives, the EHS department requires the expertise needed to help facilitate safe and compliant research on the NJIT campus. Reporting to the Director, the Environmental Health and Safety Manager will develop, implement, and administer those EHS programs required to assure occupational safety, life safety, and environmental compliance across the spectrum of NJIT operations. Primary responsibilities include fostering a "culture of safety" across all operational disciplines of NJIT and among NJIT students, faculty, and staff. The incumbent will be principally responsible for providing a wide variety of EHS services; overseeing routine and non-routine EHS projects, investigations, and inspections; maintaining accurate recordkeeping; generating professional EHS reports; liaising with the EHS regulatory community; and providing follow up documentation to all levels of the NJIT community. Essential Functions: Program Development and Implementation: Review relevant regulations and guidelines as well as currently implemented programs to develop and implement improved, up-to-date, and compliant programs in various areas of environmental health, occupational safety, and life safety. Examples of program areas include, but are not limited to, respiratory protection, hearing conservation, electrical safety, indoor air quality, confined space, and asbestos management. Manage EHS Consultants: Oversee and manage EHS consultants including but not limited to Marsh Risk Consulting, Options Environmental, RyCon Solutions, and Proactive Environmental. Oversight to include establishing scope of work, developing consulting agreement and purchase orders, management of individual consulting projects, invoice and budget management, and general project management responsibilities. Review and Approve Purchase Requisitions: approve purchases of chemicals, substances and equipment entered by other departments (campus wide) and provide feedback on regulatory and procedural needs associated with such purchases. Provide timely approval (or rejection) of the purchase requisition and work with the purchaser to assure all requirements are established and met. Controlled Substances: Implementation of US DEA and State of NJ Controlled and Dangerous Substances regulations as applied to academic research operations and laboratory animal experimentation. Waste Disposal: Manages/coordinates the collection, storage and disposal of all waste streams generated from NJIT labs and shops in conformance with US EPA and NJ DEP regulations. Assesses or coordinates assessment of waste storage or staging areas as required by local or state regulations. Trains applicable lab or shop personnel on requirements and communicates mitigation action when warranted. Biological Safety: Assists or manages the university's biological safety program, in conformance with applicable regulatory requirements in NJIT laboratories. Duties may also involve acting as the NJIT Biological Safety Office (BSO) or Assistant BSO and will include (but are not limited to): -Provide technical support and expertise in the administration and maintenance of such programs. -Help develop, implement and manage policies, procedures and programs that promote a safe, responsible, healthy and compliant work environment for all faculty, staff and students. -Offer service, technical support and compliance guidance to the University, act as a liaison with the University and external agencies and is the lead authority on biological risk assessments associated with campus research and teaching laboratories. -Manage and monitor programs, procedures, and policies that assure safety and compliance for Research Committee support (e.g., Institutional Biosafety Committee (IBC), Institutional Animal Care and Use Committee (IACUC) and Animal Users Health and Safety Program (AUHSP) Working Group). -Lead member on the emergency response team for biosafety incident response and emergency planning. -Helps interpret guidance and communication from CDC, USDA, NIH, OSHA, DOH, DEC and other agencies as applicable to biosafety. Laser Safety: Implements the OSHA Technical Manual for LASER safety in NJIT laboratories. Includes training, lab inspections, corrective measures, and consultations with laboratory researchers. Requires the completion of an accredited LASER Safety Officer training program. Hazard Communication and Right-to-Know (RTK): Manages or coordinates university compliance with applicable local, state and federal regulations regarding chemical or hazardous substances use/storage. Ensures the university submits and annual RTK survey as required and works with chemical users to ensure they maintain chemical inventories, SDSs, labeling and store chemicals properly. Provides or coordinates training of all applicable staff and students on campus. Facility Maintenance and Contractor Safety: Administer NJIT's overall safety program as applied to both in-house and external vendors performing facility maintenance activities on the NJIT campus. Responsibilities include the application of applicable OSHA standards, as well as other regulatory statutes and guidelines, to facility maintenance activities on the NJIT campus. Includes training, inspections, attendance at project meetings, follow up with appropriate REDCO managers to facilitate corrective measures. Regulatory Compliance: Various compliance activities related to multiple federal, state, and local regulatory agencies including US EPA, US NRC, NJ PEOSH, NJ DEP, NJ DOH, NJ DCA, and City of Newark. Laboratory Safety: Manages and implements multiple elements of the NJIT laboratory safety program in assigned laboratory facilities including chemical hygiene, particularly hazardous substances, hazard communication, caution signs, right to know, emergency response, and regulated waste disposal. Assist departments, centers and colleges prepare for scheduled inspections and accreditation visits. Laboratory and Shop Inspections: Identify deficiencies in EHS programs and practices through an organized system of inspections, investigations, and associated recordkeeping and follow-up. Inspections to include buildings, research and instructional laboratories, academic and maintenance shops, work areas, mechanical rooms, renovations, chemical substances, safety practices and equipment, fire extinguishers and suppression systems. Inspect all areas of the campus for safety conditions, document and report such conditions using EHS comprehensive inspection checklists. Provide recommendations to correct unsafe conditions and improve safety follow through to ensure that hazardous conditions have been mitigated. Sampling: Collect environmental/industrial hygiene samples in support of EHS investigations and inspections. Calibration and use of multiple direct-read electronic instruments as well as air and bioaerosol sampling devices. Interpretation of sampling results and incorporation of results into EHS reports and summaries. Collection of drinking water samples in support of NJIT's drinking water sampling protocol and posting of sampling results on the EHS website. Work with EHS consultants on environmental sampling protocols as required. Supervision: Provide management and oversight of EHS personnel including student workers and EHS Coordinators for specific projects and general EHS duties. Supervision of future EHS employees as program needs develop such as future EHS technician(s). Industrial Safety: Manages and implements the NJIT industrial safety programs in non-lab environments including Makerspace, Facility Services shops, and other large-format facilities. In additional to traditional industrial applications, LASER cutting, metallic deposition, additive manufacturing, and other emerging industrial techniques are overseen. Confined Space: Maintains listing of NJIT confined spaces and provides training and oversight to NJIT and outside vendors regarding permit-required confined spaces. Coordinates with outside risk management consulting firm. EHS Training: Co-manage with EHS colleagues the development and implementation of EHS training programs for a variety of programmatic areas. Ability to pivot to on-line training if required. Develop new and compliant training material as required. Deliver monthly EHS training to the campus community in both on-line and in-person formats. Maintain up-to-date training schedule on the EHS website. Maintain up-to-date training records on the EHS shared drives. Respond to queries from the campus community regarding upcoming trainings, training schedules, and training records. Laboratory Engineering Controls: Co-manage with EHS colleagues the administration of testing, monitoring, and inspection/repair of chemical fumes hoods installed in NJIT laboratories in conformance with ASHRAE guidelines. Supervises and oversees measurement and testing data collected by NJIT student workers and coordinates required repair, re-balance, and re-testing with NJIT Facility Services, Design and Construction, and outside mechanical vendors. Responsible for instrumentation including maintaining calibration and quality assurance. Toxic Substances (TXS) and Hazardous Air Pollutants (HAPs): Co-manage with EHS colleagues the maintenance of distribution logs and use calculations for 13 toxic substances (TXS) and approximately 200 hazardous air pollutants (HAPs) maintained in NJIT laboratories and utilized in NJIT laboratory fume hoods requiring calculations to determine potential evaporation rates as related to NJIT's air pollution control requirements. Manage Signature Programs: Manage all aspects of NJIT's radiation safety program, radioactive waste disposal program, confined space program, controlled substance program, LASER safety program, and shop safety program. In addition to programmatic/technical responsibilities, duties to also include obtaining consultant/vendor proposals, executing NJIT Professional Services Consulting Agreement, establishing purchase orders in Uni-market, managing vendor invoicing, and project management and budgeting. Campus Communication: Meet with various members of the campus community (including students, staff, faculty, and administration) to discuss a wide variety of EHS issues. Departmental and NJIT Committee Meetings: attend and represent EHS at a variety of forums including university committees and councils. Generate original content for EHS website and other outlets highlighting EHS programs and services available to the university community. Maintain up-to-date EHS information on departmental website including training schedules, sampling results, program and procedural information. NJIT EHS Website: Work to help continually improve EHS website with updated content and information. Professional Development: Maintain membership and participate in professional organizations and associations related to EHS responsibilities. Network with EHS professionals at comparable institutions and organizations. Leverage relationships and knowledge gained to further NJIT's EHS goals and objectives. General EHS Responsibilities: In addition to the specific programmatic responsibilities previously described, general oversight, inspection, and auditing of university operations in terms of chemical hygiene, indoor air quality, lab and shop safety, accident and injury prevention, emergency response, occupational safety, and construction safety including required sampling, record keeping, report writing, data management, and required follow up. Campus-Wide Responsibilities: In addition to the general and specific programmatic responsibilities previously described, the EHS Manager position includes the implementation of environmental and occupational health and safety programs throughout all aspects of NJIT's academic and operational enterprise. Additional Functions: -Demonstrate initiative, independence, and sound decision making in support of EHS and Facilities Operations or NJIT goals and objectives. -Ability to work independently under general direction and complete projects in a timely manner. -Maintain contact with vendors and consultants, maintain records related to departmental expenditures to support EHS budget management especially in signature program areas. -Pursue advanced training in support of EHS and REDCO goals and objectives leading to certification in one or more program areas. -Supervise student workers, EHS Coordinator(s), and/or EHS Technician(s). -Be available for occasional off-hour planned or emergency response activities, training, or other activities, as required. -Working knowledge of multiple EHS disciplines. Ability to fill in for other EHS group members as required. -Other duties as assigned. Prerequisite Qualifications: -Requires a bachelor's degree in a physical, chemical, engineering, or life science. -Six (6) years of experience in environmental and/or occupational health and safety. -OSHA 40-hour HAZWOPER/DOT certification and refresher training required. -Knowledge in administering occupational health programs and emergency management required. -Knowledge of US EPA, NJ DEP and NJ PEOSH regulations required. -Must be able to lift 50 pounds. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Preferred Qualifications: -Master's degree in physical, chemical, engineering, or life science preferred. -Bio-Safety experience, training or credentials. -Air Permitting experience, training or credentials. Bargaining Unit: PSA Range/Band: 23 Salary Information: In compliance with the NJ Pay Transparency Law, the negotiated annual salary range for this position is $63,754.42-$119,012.58 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. To learn more about the comprehensive benefits NJIT offers for this position, please visit our benefits page: . FLSA: Exempt Full-Time Apply NowShare Save Job

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: To Live and Lead Safety · Takes responsibility for employee safety and wellness by deploying the ATS safety program and ensuring effective completion of safety training, observations, and incident investigations. · Implements and actively supports all Beyond Zero initiatives · Enables the growth of a customer safety culture by a fostering a safety partnership and sharing best practices To Inspire and Provide Clarity on Vision and Strategy · Motivates employees by communicating a clear vision that enables all employees to understand the rationale for, and the benefit of, both site-level and company-wide objectives · Acts as an effective change agent, leading the implementation of strategic initiatives through positive team communications, appropriate action planning, and successful implementation activities · Understands and appropriately articulates both ATS and customer strategies, providing the team with line of sight between team responsibilities and strategic outcomes To Own Our ATS Culture · Builds positive relationships with ATS employees, customers, and peers through open communication and role-modeling the ATS leadership core competencies of honesty and respect · Sets a positive, influential standard for others and creates a constructive climate for their team · Influences with transparency and use participative methods to ensure that decisions are understood and accepted · Establishes a positive work environment through managing and personalizing onboarding; engaging in ongoing one-on-one communications; and recognizing individual contributions and achievements on a timely basis · Adheres to policies and procedures and ensures that staff understands the rationale behind policies and processes To Support Our Employees' Learning and Growth · Leads and builds team capabilities by working with individuals on performance improvement, career planning, training, and skills development. · Develops, communicates, and executes a Skills Matrix and Technician Training Plan · Builds and maintains a succession plan for key positions (i.e., Supervisors, Supply Chain, P/S, RE) To Ensure and Drive our Business Results · Leads and ensures the Operating System is understood, reinforced, and embedded · Develops and executes a site-specific maintenance plan per ATS standards · Manages financial performance of the site (revenue, expenses, and profit) to achieve set objectives · Develops and maintains effective relationships with all ATS business units, fully utilizing their services and ensuring cross-functional alignment · Collaborates with and builds customer relationships to ensure priority alignment and proactively anticipates customer needs as the primary on site contact · Ensures alignment of customer expectations and ATS site goals through management of site-specific contracts · Communicates with the customer through daily, weekly, and monthly meetings and conducts a regular review of the performance metrics with the customer · Drives a continuous improvement methodology and promotes cost savings · Analyzes and reports on key performance indicators, completing root cause analyses and developing and executing action items while removing barriers and addressing issues · Collaborates with sales and operations leadership to increase the scope of services Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor's degree in technical, business, or a related field preferred or seven years of operations / maintenance experience · Three years of supervisory experience with a strong focus on development of employees · Resilient and flexible, able to multitask and prioritize with an innate ability to understand and accept change and motivate others around change · Highly tuned emotional intelligence with demonstrated ability to build relationships and lead teams with honesty and integrity to achieve goals · Solid understanding of manufacturing / assembly work environment · Business acumen · Positive influencer with appropriate levels of organization. · Strong customer focus with the ability to build positive business relationships and show a sense of urgency Desirable KSAs · Manufacturing maintenance experience preferred with related certifications and training · Good understanding of, and/or experience with, proactive/reliability maintenance processes, i.e., Planning/Scheduling, P/M, PdM, and root cause analysis, and continuous improvement methodologies · Good computer skills, including Microsoft applications and web-based applications such as Power BI, GEAC, Concur, Workday and related software · Time management skills · Ability to relocate to specified locations · Excellent communications skills (verbal, written, and presentation) · Agile, curious learner and authentic, credible teacher · Financial acumen and knowledge of forecasting and managing budgets Leadership Core Competencies: Business and Company Acumen Lead with honesty and integrity Build bold and relevant strategies Welcome and motivate change Recognize the right outcomes and how they were achieved Role model safety and wellness Emotional Intelligence Provide psychological safety Be self-aware Build relationships Ask for and act on feedback Respect diverse background and viewpoints Lead in the Present; Eye to the Future Commit to accountability Coach people to their potential Own talent development and placement Turn problems into opportunities Be resilient and flexible Communicate, Communicate, Communicate Practice transparency Build relationships through respect Be a curious learner and credible teacher Influence in a proactive, positive way Ensure cross functional awareness/decisions ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$126,275.62—$168,367.53 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

We're seeking a Mechanical Technician who's ready to put your skills to work on projects that matter - and build a career with a company that's building North America. Job Title: Mechanical Technician | Req ID: 16206 | HR Contact: Kara Elizabeth O'ROURKE| Location: Ravena Cement Plant NY COMPANY OVERVIEW \n Amrize is building North America. From bridges and railways to data centers, schools, offices and homes, our solutions are inside the buildings and infrastructure that connect people and advance how we live. And we invite you to come and build with us. \n As the partner of choice for professional builders, we offer advanced branded solutions from foundation to rooftop. Wherever our customers are, whatever their job, we're ready to deliver. Our 19,000 colleagues work across 1,000 sites supported by an unparalleled distribution network. Infrastructure, commercial and residential, new build, repair and refurbishment: We're in every construction market. \n Amrize listed on the New York Stock Exchange and the SIX Swiss Exchange on June 23, 2025, following our spinoff as an independent company. Join us and build your ambition. \n ABOUT THE ROLE \n To work as part of a team to ensure the continuous operation of the cement plant and associated facilities in order to maximize operational efficiency in an environment of continuous learning and improvement; to maintain, troubleshoot and repair plant equipment in accordance with plant needs within MSHA, and AMRIZE safety guidelines. \n WHAT YOU'LL ACCOMPLISH \n\n • Perform all work according to MSHA and plant health and safety procedures and policies, put safety first in everything you do.\n, • Perform mechanical maintenance work to ensure safe, continuous and efficient operations. Fabrication, assembly, welding, and cutting following safe and accepted maintenance practices to maintain high equipment reliability.\n, • Dismantles, repairs, and reassembles equipment using an array of mechanical tools and equipment, not limited to, but including, wrenches, pneumatic tools, cutting and welding equipment, an array of workshop equipment, rigging equipment, etc. \n, • May be asked to serve as a member of a Continuous Improvement Group to identify opportunities for improvement.\n, • Troubleshoot potential concerns required to achieve and maintain maximum productivity. \n, • Report maintenance problems to the appropriate supervisor and participate in the development of corrective and preventative maintenance plans.\n, • Perform preventive/proactive inspections and document findings as directed by the maintenance supervisor and continuous improvement groups.\n, • Exercise good housekeeping practices at all times.\n, • Safely operate mobile equipment as required.\n Additional Requirements: \n Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit test. PHYSICAL DEMANDS \n The Physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n\n • While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. \n, • The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. \n, • The employee will frequently be required to walk on rocky, irregular surfaces that may be muddy and in reduced lighting conditions. \n, • The employee is occasionally required to sit. \n, • The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. \n, • While performing the duties of this job the employee is regularly exposed to moving mechanical parts. \n, • The employee is frequently exposed to high, precarious places; fumes or airborne particles; water related hazards; outside weather conditions; and extreme heat. \n, • The employee is occasionally exposed to wet and/or humid conditions, proximity to electrical equipment, and vibration. \n, • The noise level in the work environment is usually moderate but occasionally loud.\n Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. \n We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job title: Electrician \n\n Location: 1249 Newark Turnpike, Kearny, NJ 07032 \n\n Pay: $43.88ph \n\n Shift: 5:45 pm to 6:00 am - 36/48 schedule. During training, they need to be available from 5:45 am to 6:00 pm (2 to 3 months) \n\n Contract: Direct Hire \n\n \n\n The purpose of the Electrical Technician is assist in the installation and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment. This role also provides maintenance repairs to industrial machinery as needed to keep a continuous manufacturing process supported. Uses man lifts, forklifts, hoists and all electrical testing equipment required. Must work safely and follow all documented and “common sense” safety policies and procedures. \n\n \n\n This individual is expected to perform as a professional, highly skilled and exceptionally competent maintenance person. They must be able to analyze causes of breakdowns and carry out corrective measures. \n\n \n\n Principal Duties and Responsibilities: \n\n\n\t • Notify your supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem.\n\t, • Take personal ownership to work safely each and every day and hold other team members to the same high standards of safety\n\t, • Install and repair complex industrial equipment \n\t, • Helps to Maintains all Plant electrical and electronic sys.\n\t\n\t\t, • Assist in the development of PM and Predictive maintenance program for all motors and panels\n\t\n\t\n\t, • Diagnose malfunctioning apparatus such as transformers, motors, and lighting fixtures and replaces damaged or broken components.\n\t\n\t\t, • When appropriate or when plant decides lead efforts for electrical root cause analyzes\n\t\t, • Establish a program to monitor all critical motor in the plant.\n\t\n\t\n\t, • Tests malfunctioning machinery and discusses malfunction with other maintenance workers.\n\t\n\t\t, • Be lead person for electrical downtime and trouble shooting\n\t\n\t\n\t, • Replaces faulty electrical components of machine such as relays, switches, motors, and position sensing devices.\n\t, • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion.\n\t, • Helps with electrical training of other maintenance personnel.\n\t\n\t\t, • Help coordinate electrical training program and efforts for the plant.\n\t\n\t\n\t, • Complies with safety requirements and notifies management of noted exceptions.\n\t, • Follows all environmental compliance polices & programs.\n\t, • Works as instructed with outside contractors.\n\t\n\t\t, • Be a lead person for all electrical projects and installation that are maintenance responsibility.\n\t\t, • Be maintenance contact person on automation projects.\n\t\n\t\n\t, • Willing to attend annual training for new or improved electrical & PLC sys.\n\t, • Comply with all plant rules\n\t, • Comply with safety regulations and maintain a clean and orderly work area\n\t, • All other duties as assigned or needed\n\t, • Regular Attendance on site and ability to rotate to varying shifts\n\n\n \n\n \n\n \n\n SKILLS AND ABILITIES \n\n \n\n The employee should hold the following abilities: \n\n\n\t • Basic Computer Skills\n\t, • Electrical: industrial electrical code. (local compliance issues) \n\t, • PLC\n\t, • Hydraulic\n\t, • Pneumatics\n\t, • Blueprint & Schematic reading and P&ID drawings.\n\t, • Basic Welding\n\t, • Fusing, thermal overload protection, wire sizing, motor theory, etc.\n\t, • AC, DC and Servo drive system (basics)\n\t, • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc.\n\t, • Ability to fully troubleshoot drives-DC and AC variable frequency, and communicate technically with outside technical support when needed. Ability to fully understand and properly tune the various control loops in the plant including IM/APC systems and weight control equipment. Fully competent in electrical noise avoidance-grounding, shielding, etc. (at least 2 persons, each plant)Burner system understanding, troubleshooting and properly tuning (at least 2 persons, each plant)\n\t, • Able to think under pressure and make quick decisions\n\t, • Ability to work well in a team or alone\n\t, • Able to communicate in English\n\t, • Good attention to detail\n\n\n \n\n COMPUTER AND SOFTWARE COMPENTENCIES \n\n\n\t • Must be able to operate a computer or other keyboard instrument \n\n\n \n\n EDUCATION AND/OR EXPERIENCE \n\n The employee should have the following: \n\n\n\t • High School Diploma or GED Equivalent\n\t, • PLC Training\n\n\n \n\n Experience: \n\n\n\t • Preferably seven- (7) year’s experience in related maintenance trade or occupation that involved electrical and electronic components in a manufacturing environment. \n\t, • Must have the ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. M\n\t, • ust have the ability to interpret instructions furnished in written, oral, diagram or schedule form. \n\t, • Must be able to work independently with minimal direct supervision with drive toward accomplishment, and to produce high quality work. \n\n\n \n\n ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT \n\n The employee should possess the ability to: \n\n\n\t • Do repetitive hand, arm, leg movements for several hours\n\t, • Climb on and off of fork truck\n\t, • Stand for 10 - 12 hours straight\n\t, • Climb and descend stairs for up to 12 hours continuously\n\t, • Lift and push and pull 50lbs. More than 100 times per day\n\t, • Squat, bend at the waist and knees freely\n\t, • Expose to sounds or noise levels that maybe uncomfortable\n\t, • Handle, control or feel objects, tools or control--continously\n\t Find what’s next with Kelly®. As a worker today, it’s up to you to take charge of your career and look for opportunities to learn, grow, and achieve your potential. Helping you find what’s next is what we’re all about. We know what’s going on in the evolving world of work-just ask the 440,000 people we employ each year. Connecting with us means getting the support, guidance, and opportunities needed to take your career where you may have never imagined.\n\t\t\t \n\t\t\t \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. \n\t\t\t \n\t\t\t

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $93,475.37 - $119,546.72 ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Fire Alarm Technician NY/NJ, USA Founded in 1991, the Mircom Group of Companies is North America’s largest independent designer, manufacturer and distributor of intelligent building and life safety solutions. Reaching customers in over 100 countries worldwide, our portfolio includes: fire detection & alarm, communications & security, mass notification, nurse call, and building automation & smart technologies. Mircom’s mission is to save lives and protect property by providing a line-up of innovative and advanced solutions which are scalable to satisfy diverse user demands, from small buildings to the largest complexes. Our unwavering commitment to North American manufacturing enables us to offer the highest quality and best competitive value across our vast range of products and solutions. Summary: Reporting to the Area Sales Manager, the Fire Alarm Technician, will play a crucial role in providing technical support to our Dealers and ESDs in the NY-NJ territory, with the ability to extend support beyond as required. The successful candidate must be able to accommodate a flexible schedule. Join our dynamic team and contribute to the success of our fire protection solutions. The successful candidate must reside in central Jersey area or in one of the 5 Boroughs of New York City. Apply now to be part of an innovative company at the forefront of the industry. Key Responsibilities: • Occassionally perform Programming, Verification and Inspection of fire alarm systems, access control and intercom systems, along with other fire protection equipment, • Program to effectively navigate fire protection systems with our end users., • Conduct testing and evaluation of new products to ensure compliance with industry standards and regulations, • Conduct technical Lunch & Learn sessions to educate and inform clients on our products and services, • Provide technical support to customers as needed, • Provide operational training to end-users, • Extend our service offerings to better meet customer needs, • Collaborate with Engineering and Applications department to ensure seamless integration of technical solutions and effective communication with clients, • Address inquiries and resolve technical issues, while providing quality customer care, • Maintain accurate and organized documentation for all technical activities, including testing, verification, inspection and client interactions, • Ensure our customers and end-users have a positive experience working with Mircom, • Read and understand engineered drawings, specifications, programs, schematics, installation manuals, and service manualsRequirements and Skills:, • Possess a NICET Level 2 certification is an asset, or 3 to 5 years of fire alarm experience is preferred, • Completion of high school and/or trade school, • Proficient in Programming experience, • Proficient in Microsoft Office (PowerPoint, Excel and Word), • Thorough understanding of the high-rise market, including its unique challenges and code requirements, • Excellent communication skills (written and verbal), • Superb in planning, organization, and multi-tasking skills, • Customer-service oriented and a team-player, • Accurate and detail-oriented with the ability to gather & monitor information, assess & solve problems., • Other duties incidental to those described herein., • Ability to travel and overnight stays as required, • A great working environment with opportunity for career advancement, • Competitive salary, • Group Insurance benefits We would like to thank all applicants for their interest in this position however only those selected for interviews will be contacted. Mircom Group of Companies is an Equal Opportunity Employer committed to workforce diversity. Qualified applicants will receive consideration without regard to age, color, creed, disability, genetic information, national origin, race, religion, sex, sexual orientation, veteran status or any other category protected by law. Disclaimer: Mircom does not accept resumes from employment placement agencies, head-hunters or recruitment suppliers that are not in a formal contractual arrangement with us. Our recruitment supplier arrangements are restricted to specific hiring needs and do not include this or other job postings. Any resume or other information received from a supplier not approved in advance by Mircom to provide resumes to this posting or web-site will be considered unsolicited.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job Description Job Title: 3D Print & Wax Technician Assistant (Jewelry Production) Location: New York, NY Company: TraxNYC Job Type: Full-Time / Part-Time (On-site) About TraxNYC TraxNYC is a high-end luxury jewelry brand renowned for crafting some of the most exquisite and detailed jewelry pieces in the world. With a history of innovation and a commitment to the finest craftsmanship, we are looking for a talented, creative, and detail-oriented Jewelry Designer who specializes in 3D modeling and CAD design to join our growing team. This is a unique opportunity to work in an exciting, fast-paced environment with a team that values both artistic vision and technical expertise. We are looking for a 3D Print & Wax Technician Assistant to support our jewelry production workflow, specifically in wax printing, handling, and prep for casting. Role Overview The 3D Print & Wax Technician Assistant will support daily operations related to wax 3D printing, post-processing, and production coordination. This role is ideal for someone detail-oriented, hands-on, and interested in jewelry manufacturing and 3D printing technologies. You will work closely with senior technicians, designers, and production managers to ensure smooth output from digital design → wax print → casting prep. Key Responsibilities 3D Printing & Wax Handling • Assist with operating wax 3D printers (setup, start jobs, monitor prints), • Remove, clean, and post-process wax prints carefully, • Inspect wax models for defects (cracks, layer issues, incomplete prints), • Label, organize, and track wax models for casting Production Support • Prepare waxes for casting (spruing support, storage, handling), • Maintain cleanliness and organization of print and wax stations, • Assist with printer maintenance (resin/wax refills, cleaning, basic troubleshooting), • Track daily print jobs and report issues to senior technicians Quality Control • Ensure wax models meet quality standards before casting, • Follow proper handling techniques to avoid breakage or distortion, • Communicate print or design issues promptly Documentation & Workflow • Log print jobs, failures, and reprints, • Help maintain production schedules and timelines, • Follow standard operating procedures (SOPs) and safety guidelines Required Qualifications • High attention to detail and steady hands, • Comfortable working with small, delicate components, • Ability to stand for extended periods and perform hands-on work, • Willingness to learn jewelry production processes, • Reliable, organized, and punctual Preferred (Nice to Have) • Experience with 3D printers (wax or resin), • Jewelry manufacturing or casting experience, • Familiarity with CAD files or design workflows, • Experience working in production, manufacturing, or lab environments What We Offer • Hands-on training in luxury jewelry production, • Exposure to advanced 3D printing and casting workflows, • Growth opportunities within TraxNYC production team, • Fast-paced, creative, and collaborative work environment Work Environment • On-site production facility, • Jewelry workshop with specialized equipment Expected hours: 40 – 50 per week Benefits: • Employee discount Company DescriptionAbout Us: TraxNYC Jewelry is a leading name in the jewelry industry, renowned for our unique designs and unparalleled quality. We are committed to crafting exquisite jewelry pieces and providing exceptional customer service.About Us: TraxNYC Jewelry is a leading name in the jewelry industry, renowned for our unique designs and unparalleled quality. We are committed to crafting exquisite jewelry pieces and providing exceptional customer service.

Job Description The Quality Assurance Technician is responsible for routine inspection and testing of raw materials and components as well as of final product for Cresilon’s products in the Animal and Human Health industries. This position requires a strong attention to detail as the individual will be responsible for identifying deviations in product quality or safety and ensuring compliance with local, state, and federal regulations, including current Good Manufacturing Practices (cGMP). Position is for 2nd shift. Responsibilities: • Sample and perform visual inspection of final products and raw materials. Perform other testing under the direction of QA Operations Manager., • Perform line clearance activities and in-process inspections., • Monitor routine manufacturing operations for conformance to applicable procedures (see Gowning Qualification requirements below), • Transfer materials between facilities (see lifting requirements below), • Facility 1 of 2: 122 18th Street, Brooklyn, NY 11215, • Facility 2 of 2: 87 35th Street, Suite 603/604/6R, Brooklyn, NY 11232, • Operate testing equipment such as force testers, torque testers, and balances., • Report all deviations in product, components, raw materials, and equipment per their relevant procedures, • Perform document control activities, including but not limited to printing logbooks and batch records., • Transcribe data into digital systems for tracking Quality Metrics., • Batch record review & support routine batch disposition Requirements Education: High School Diploma or Equivalent (2- or 4-year degree in Engineering, Science, or Technology/Biotechnology preferred) • Required experience in GMP and FDA regulated environments (ISO 13485:2016 preferred), • Ability to be Gowning Qualified per Cresilon’s SOP., • 1 year experience in regulated industry highly desirable · Paid Vacation, Sick, & Holidays · Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage · Company Paid Life and Short-Term Disability Coverage · Work/Life Employee Assistance Program · 401(k) & Roth Retirement Savings Plan with company match up to 5% · Monthly MetroCard Reimbursement The salary for this role is $25/Hour Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description Job Title: Diesel Mechanic Location: Newark, NJ Type of Position: Direct Hire/Permanent Pay: $28-$37/hr Job Description We are seeking a skilled Diesel Technician to troubleshoot, diagnose, adjust, and repair equipment and vehicles, including electrical, brake, hydraulic, cooling, and power steering systems, as well as engines and other standard electrical components. This role involves performing preventative and corrective maintenance and inspections independently, following manufacturer and customer requirements. Responsibilities • Independently carry out maintenance servicing on GSE (Ground Support Equipment) and/or Commercial Trucks following OEM specifications and company standards., • Safely and securely transport GSE and/or Commercial Trucks., • Diagnose and repair mechanical issues, including basic electrical repairs, on a range of GSE and/or Commercial Trucks., • Utilize GSE and Commercial Truck manuals to look up necessary repair information., • Conduct thorough inspections, including checking vehicle hours, water, oil levels, lights, and overall condition to ensure compliance with safety and operational standards., • Report and discuss with the supervisor any damage or work outside the prescribed scope to determine appropriate next steps., • Perform refurbishing tasks, including fabrication, body work, painting, welding, and upholstery, ensuring standards of quality and safety are met., • Prioritize tasks effectively to maintain productivity and meet customer requirements., • 3+ years experience in preventive maintenance, hydraulics, and diesel engines., • Strong electrical experience and proficiency in diagnosing and repairing automotive, diesel, truck, and engine issues., • Proficiency with GSE (Ground Support Equipment) and electrical systems is a plus., • Valid Driver’s License required; CDL preferred but not required., • Must provide personal hand tools; specialized tools and diagnostic equipment are supplied., • Strong knowledge of electrical, mechanical, and hydraulic systems., • Proficiency in using mobile devices and relevant applications., • Solid understanding of essential safety, quality, and operational protocols. Become part of a solid and growing international group with short decision lines, where employees are central to success. Opportunities for development and growth are abundant. Enjoy a competitive hourly salary and multiple employee benefits, including medical, vision, and dental insurance, disability insurance, life insurance, a 401k plan, PTO, paid sickness, and provision of all PPE. Work Environment Technicians receive tasks from tablets and carry out a variety of maintenance duties, including PMs, check engine lights, and brake repairs. The maintenance is comprehensive, covering everything from bumper to bumper. Trucks are primarily diesel, with a few gas engine trucks. Shift hours include 1st, 2nd, and 3rd shift. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $62400.00 - $76960.00/yr. They offer three different medical plans with UHC (1 HSA plan and two traditional plans), there is cost sharing as well, for Employee Only TCR covers 80% of the monthly premium, for EE+ 1 or EE + Family TCR covers 65%. Delta is through Delta Dental And Vision is through UHC It's a comprehensive benefits package including health, vision, and dental insurance, disability insurance, life insurance, a 401k plan, PTO, paid sickness leave, and the provision of all PPE. Also provides employees with long and short term disability and life insurance at no cost. Additional life insurance can also be purchased through Lincoln. Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 29, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Laboratory Technician Title: Laboratory Technician Location: Secaucus, NJ Reports to: Laboratory Manager Per diem Frontage Laboratories Inc. is an award winning, publicly listed (HKSE), full-service CRO/Contract Research Organization operating over 25 state-of-the-art laboratories across the US, Canada and China, and growing over 30% YOY. Our core competencies include drug metabolism, pharmacokinetics/ pharmacodynamics (PK/PD), safety and toxicology, bioanalytical services, chemistry and manufacturing controls for drug development, and core laboratory services for clinical trials. Position/Job Summary: The laboratory technician performs a variety of laboratory procedures as required by the study protocol. Laboratory technicians are responsible for assisting the Laboratory Manager, Principal Investigator, Clinical Research Coordinators, and other medical professionals in the preparation and handling of specimens, analyzing results, and maintaining laboratory equipment. Laboratory Technicians ensure accuracy, quality control, and adherence to safety protocols, contributing directly to scientific research, development of new products, or medical diagnostics. Roles & Responsibilities: • Performs routine laboratory procedures including specimen labeling, collection, processing, and shipping in accordance with established SOPs and/or study protocol under the supervision of the Laboratory Manager, Clinical Research Coordinator, Principal Investigator, and Sub-Investigators., • Operate and maintain laboratory equipment such as centrifuges, pipettes, and refrigerators/freezers., • Develop a strong working knowledge of the study protocols and flow chart of study procedures and implement study procedures in full compliance with protocol requirements., • Maintain accurate and timely documentation in laboratory or study-specific documents, temperature logs, and shipping logs., • Perform environmental monitoring and equipment temperature checks to ensure proper specimen storage conditions., • Assist with inventory management, restocking supplies, and maintaining organized work areas., • Ensure compliance with safety, quality, and regulatory standards (GCP and internal QA procedures)., • Support weekend and surge workload coverage as needed based on operational demands., • Assist Laboratory Manager in any task as needed. Education, Experience & Skills Required: • Associate or BS in biology, chemistry, or related area, or completion and certification of Lab Technician course from an accredited or allied health training school., • 1 year of experience in clinical research laboratory or related medical field., • Proficiency in laboratory techniques and laboratory equipment operation., • Good communication skills., • Excellent organization and planning skills. Salary: $18-$22/hour Benefits: • 401k Employer Match with immediate vesting, • Vision Insurance, • Medical and Dental Insurance with multiple coverage options, • FSA (Medical, Dependent Care, and Commuter), • Short Term Disability, • Long Term Disability, • Life Insurance, • Generous Paid Holidays and PTO Frontage Laboratories Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Evaluates non-emergency work requests, develops scope of work, and inspects job location to determine job requirements. · Estimates labor hours, skillsets, parts, materials, equipment and special tools required to complete proactive jobs in a safe and efficient manner. · Gathers relevant technical documentation such as drawings, schematics, specifications, spare parts lists from equipment histories, OEM manuals and the Knowledgebase system. Verifies the availability of parts prior to scheduling the job. Arrange for special tools and auxiliary equipment when required. · Maintains an organized and prioritized work order backlog to determine the next highest priority jobs to be planned next and maintains the Ready Backlog at or above 80%. · Employs the continuous improvement process to update Job Plans for accuracy and effectiveness. · Conducts weekly planning & scheduling meetings with Production to determine work order priorities, communicate work order status and alter planned maintenance activities if necessary. · Creates a Weekly Technician Schedule that includes priority planned jobs and preventative maintenance tasks that utilize 100% of the available technician labor hours. · Improves work order planning and scheduling effectiveness through the review process and use of the maintenance metrics. · Maintains records and files essential to meaningful analysis and reporting of maintenance related matters. · Trains site employees on CMMS and ensures that it is working with integrity and is being utilized. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Associate Degree required in a technical field with 1-3 years of maintenance scheduling / planning experience and/or 5 – 10 years as a machine repair technician, or equivalent combination of both · Familiar with industrial manufacturing environment · Electrical/mechanical aptitude · Proficiency with computers, maintenance systems, and applications including Microsoft Office · Excellent verbal communication, facilitation, and presentation skills · Ability to build and maintain positive, professional relationships Desirable KSAs: · Desire to develop leadership attributes · Experience in job plan development, job scheduling, and work execution · Project management and capital project experience preferred · CMRP certification · Green Belt certification · STS certification Competencies: · Drive & Motivation · Interpersonal Skills · Task Management · Strategic Skills · Customer Focus Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$93,475.37—$119,546.72 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . The Production Technician I is responsible for the aseptic manufacturing of Cresilon’s products for the animal health industry. The Production Technician II will be trained in clean room operations, aseptic techniques, and must demonstrate the ability to successfully pass gowning qualifications. The position involves operating simple and complex processing equipment, routine sanitization of cleanroom facilities, and manual cleaning of equipment. The ideal candidate will have a proven track record of steady progress in a similar manufacturing environment and must possess a willingness to learn all equipment and jobs in the assigned manufacturing and sanitation of clean room facilities as required. Production Technicians are also responsible for the quality of products produced by ensuring compliance with local, State and Federal regulations, including current Good Manufacturing Practices (cGMP). • Perform line clearance of assigned production areas as required., • Perform equipment set up and disassembly activities., • Operate production, assembly and testing equipment, including heat sealers, bar code scanners, weighing scales, tumblers, autoclaves, filling equipment, and packaging equipment., • Formulate, fill, and pouch product in accordance with SOPs., • Troubleshoot all operating deviations and issues and coordinate with other functions when required., • Report both machine and operating deviations to area supervisor or designee., • Perform routine, preventative maintenance on equipment., • Perform cleaning and disinfection of the manufacturing spaces., • Perform cleaning and sterilization of manufacturing equipment., • Perform visual inspection of components and/or product in accordance with SOP’s and cGMP’s., • Perform sampling, intermediate, and finished goods packaging as per SOPs., • Package and ship raw materials for sterilization., • Perform material receiving, staging, material movements, and material replenishment as per SOPs., • Transport samples, materials, and equipment between multiple facilities., • Complete data entry and generate reports for material inventory movements., • Complete and maintain applicable logbooks and batch record paperwork as required and in accordance with GMP and GDP standards., • Maintain a clean production environment during shift., • Report all actual, near misses and potential accidents for further investigation., • Take immediate action to resolve any near miss situations., • Assist in investigation of all actual, near misses and potential accidents. Provide information to troubleshoot and take initiative to resolve operational issues independently., • Assist in project commissioning and validation activities, as necessary., • Prepare samples or prototypes as required for testing, or other evaluations, • Monitor the plant status and liaise with colleagues of other departments to ensure there is no interruption to manufacturing process., • Complete all required trainings: Read and Understand (TM1), Computer Based Training with Quiz (TM2), Instructor Led (TM3/TM4), and On-the-Job Trainings (TM5)., • Oversee training of junior employees on production processes as assigned., • Ensure proper communication and handling over of shift duties., • Support Environmental and Personnel Monitoring (EM/PM) activities as directed., • HS Diploma or Equivalent with 2+ years of relevant manufacturing experience in the pharmaceutical, biotechnology, or medical device industry OR 2 or 4 year degree with 0+ years of relevant experience., • Ability to read, understand, and execute written work instructions., • Ability to complete documentation accurately., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Ability to become gowning qualified to work in a cleanroom environment., • Ability to problem solve and achieve business objectives., • Ability to adapt training approach., • Willingness to be flexible, and open minded to new processes or changes in direction., • Team oriented, building relationships with peers and managers in a proactive manner., • Excellent verbal and written communication skills., • Proficient in Microsoft Office (Word, Excel, Outlook)., • Paid Vacation, Sick, & Holidays, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage, • Company Paid Life and Short-Term Disability Coverage, • Work/Life Employee Assistance Program, • 401(k) & Roth Retirement Savings Plan with company match up to 5%, • Monthly MetroCard Reimbursement This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description HIRING: Inspection Technician (Entry Level) Pay: $20+/hr. Job Description The Inspection Technician performs field-based inspections of utility-owned gas meters at residential and commercial properties to identify corrosion, damage, and potential safety issues. This entry-level role combines customer interaction, mechanical aptitude, and detailed documentation to support regulatory compliance and public safety initiatives. The position requires extensive walking, driving within the service territory, and working outdoors in all weather conditions while maintaining a professional demeanor in customers’ homes. Responsibilities • Perform periodic facility inspections and surveys on utility-owned gas meters to identify corrosion, damage, and potential safety concerns., • Enter customers’ homes and properties in a professional manner to access and inspect gas meters and related equipment., • Document all inspection findings accurately and completely in compliance with regulatory and company requirements., • Complete all necessary paperwork and electronic documentation using a handheld tablet and field binder., • Support the successful completion of regulatory audits and inspections by maintaining accurate records and following established procedures., • Conduct integrity surveys, including direct assessments and close interval surveys, as directed., • Perform audit reviews with operations teams and provide support during internal and external audits., • Follow established safety procedures and guidelines during all field activities and tailboard meetings., • Communicate clearly with customers to explain the purpose of the visit and inspection process., • Collaborate with technical services, government agencies, emergency planning committees, emergency responders, landowners, contractors, and other stakeholders as needed., • Attend and complete required classroom and field training, including homework, practice exams, and certification testing., • Demonstrate competency in performing inspections independently after training, including proper use of tools and equipment., • Maintain reliability and professionalism, including consistent attendance, punctuality, and proper communication regarding sick time and schedule changes., • Use company-provided tools and safety equipment properly, including gas detectors, flashlights, field binders, and personal protective equipment., • Possess a valid state driver’s license, with the ability to use or move company vehicles when required., • Own or have access to a reliable vehicle to travel to and within the service territory., • Demonstrate strong professionalism and customer service skills when entering and working in customers’ homes., • Communicate clearly and effectively, with excellent verbal and written communication skills., • Exhibit a basic to intermediate level of mechanical aptitude, such as experience or exposure in cable technology, HVAC, piping, or automotive work, recognizing that this is an entry-level role., • Be able to walk, climb stairs, and use ladders throughout an 8-hour workday in all weather conditions., • Remain on your feet for most of the day and walk several miles per day as part of normal job duties., • Hold a high school diploma or equivalent., • Demonstrate basic to intermediate knowledge of Microsoft Office applications, including Word, Excel, and Outlook., • Show strong organizational skills, including the ability to manage daily routes, documentation, and deadlines., • Work effectively both independently with minimal supervision and as part of a team., • Demonstrate intermediate knowledge of mathematics and algebra to support inspection and documentation tasks., • Show strong interpersonal skills and initiative, including proactive problem-solving and follow-through., • Maintain a consistent job history that reflects reliability and professionalism., • Prior experience in a mechanically inclined role, such as cable technician, HVAC, piping, or automotive mechanic, is beneficial., • Previous field inspection or technician experience is an advantage., • Experience using handheld tablets or mobile devices for work-related tasks is helpful., • Familiarity with regulatory or audit processes in a utility or industrial setting is a plus., • Comfort working in a highly structured training and certification environment, including completing homework and practice exams outside of class time., • Ability to adapt to changing routes, schedules, and priorities within the service territory., • Strong attention to detail when performing inspections and completing documentation. This role contributes directly to a major safety initiative designed to protect the public by helping prevent future gas leaks and explosions, offering a strong sense of purpose and community impact. The organization provides a structured multi-year program with significant growth opportunities in a large metropolitan area, including potential advancement into larger programs and long-term deployment initiatives. Team members benefit from clear training paths, certification opportunities, and a culture that values safety, reliability, and upward mobility. The work offers stable, ongoing demand due to recurring inspection requirements, creating a foundation for long-term career development. Work Environment This is a 100% field-based position within a utility service territory primarily covering Brooklyn and Queens. Inspection Technicians travel daily using their own vehicles to report to job sites, typically starting the day by receiving a list of addresses and route information on a handheld tablet. Standard operating hours are Monday through Friday, 8:00 a.m. to 4:00 p.m., with occasional Saturday shifts available at the supervisor’s request and at the technician’s discretion. The role involves extensive walking, stair climbing, and ladder use, as well as working outdoors in all weather conditions and entering customers’ homes. Tailboard meetings occur at warehouse locations in Queens or Brooklyn. The work environment is structured around safety and compliance, with an intensive initial training program that includes an OSHA-focused orientation, classroom instruction, homework and practice exams, certification testing, and a probationary period during the first 90 days to assess performance and competency. After passing exams, technicians job shadow in the field before working independently. The company provides all necessary tools and safety equipment, including a simple tool set, flashlight, gas detector, field binder for paperwork, ID badges, tools and tool belt, handheld tablet, flame-resistant shirts and pants, safety vest, and hard hat. Communication with supervisors regarding attendance and scheduling is expected to be timely and professional. Job Type & Location This is a Contract to Hire position based out of Long Island City, NY. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Location(s): Kearny, NJ, US, 07032-4398 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68834 Hiring Manager: Hany Azmy HR Rep: Patricia Oltar SUMMARY The purpose of the Electrical Technician is assist in the installation and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment. This role also provides maintenance repairs to industrial machinery as needed to keep a continuous manufacturing process supported. Uses man lifts, forklifts, hoists and all electrical testing equipment required. Must work safely and follow all documented and "common sense" safety policies and procedures. This individual is expected to perform as a professional, highly skilled and exceptionally competent maintenance person. They must be able to analyze causes of breakdowns and carry out corrective measures. Principal Duties and Responsibilities: • Notify your supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Take personal ownership to work safely each and every day and hold other team members to the same high standards of safety, • Basic industrial electrical code. (local compliance issues), • Capability to read schematics and P&ID drawings, • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC, DC and Servo drive system (basics), • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully troubleshoot drives-DC and AC variable frequency, and communicate technically with outside technical support when needed. Ability to fully understand and properly tune the various control loops in the plant including IM/APC systems and weight control equipment. Fully competent in electrical noise avoidance-grounding, shielding, etc. (at least 2 persons, each plant), • Burner system understanding, troubleshooting and properly tuning (at least 2 persons, each plant), • Basic Skills, pneumatics, hydraulics, mechanical gear, • When appropriate or when plant decides lead efforts for electrical root cause analyzes Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion. Helps with electrical training of other maintenance personnel. Follows all environmental compliance polices & programs. Works as instructed with outside contractors. • Be a lead person for all electrical projects and installation that are maintenance responsibility., • Comply with all plant rules, • Comply with safety regulations and maintain a clean and orderly work area, • All other duties as assigned or needed The employee should hold the following abilities: • Basic Computer Skills, • Electrical, • PLC, • Hydraulic, • Pneumatics, • Basic Blueprint & Schematic reading, • Basic Welding, • Able to think under pressure and make quick decisions, • Ability to work well in a team or alone, • Able to communicate in English The employee must be able to: The employee should have the following: • High School Diploma or GED Equivalent, • High school or GED Preferably seven- (7) year's experience in related maintenance trade or occupation that involved electrical and electronic components in a manufacturing environment. Must have the ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form. Must be able to work independently with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: • Able to do repetitive hand, arm, leg movements for several hours, • Able to climb on and off of fork truck, • Ability to stand for 10 - 12 hours straight, • Able to climb and descend stairs for up to 12 hours continuously, • Lift and push and pull 50lbs. More than 100 times per day, • Must be able to squat, bend at the waist and knees freely, • Exposure to temperature extremes, • Exposure to sounds or noise levels that maybe uncomfortable, • Handle, control or feel objects, tools or control--continously This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18.

Roquette is a family-owned global leader in plant-based ingredients and a leading provider of pharmaceutical excipients. Want to help us make a difference? Using plant-based resources, we collaborate with our customers and partners to imagine and offer ingredients to better feed people and treat patients. Each of our ingredients responds to unique and essential needs, and they enable healthier lifestyles. We are looking for our next Environmental, Health, and Safety Specialist within our Environmental, Health, and Safety Team. The Environmental, Health, and Safety Technician will be responsible for managing, improving, tracking, consult and maintain programs, initiatives and engagement related to site safety, health, environmental, and site security to protect employees and the environment as well as support compliance with local, state and federal regulations. This role will have primary responsibilities to support and lead the site's EH&S programs. This position is located in Newark, Delaware. Compensation: The current salary range for this role is estimated to be $95,000-125,000. In addition, this position may also be eligible to earn performance-based incentive compensation. The specific compensation offered to a candidate will be influenced by a variety of factors including but not limited to skills, qualifications, experience, and location. What You'll Do: • Accurately maintains Environmental, Health, and Safety (EHS) hard copy and electronic recordkeeping., • Provides training coordination using company software tools. This includes training scheduling, course and quiz development, ensuring proper documentation., • Provide administrative support to the Site Contract Administrator. Will maintain training records, coordinate contractor vetting using ISN, update contractor status spreadsheet, maintain vendor electronic files, and track hours of operation., • Provide administrative support for medical surveillance program. (Maintain spreadsheets, distribute paperwork, schedule appointments)., • Coordinates safety milestone, initiative, and recognition programs., • Manage Safety Data Sheet system and inventory., • Enter and track documentation for Behavioral Based Safety Program, • Manage tracking of safety and housekeeping programs and closure of action items., • Contact for First Aid Supply vendor. Perform AED inspections., • Order EH&S supplies and services., • Assists in administration of the site's security badge system., • Facilitate development and implementation of site's annual EH&S Continuous Improvement plan., • Support implementation and maintaining of the site's EH&S policies that define requirements to maintain compliance with regulatory requirements and corporate EH&S standards., • Develop and implement improvements to safety systems to ensure compliance with requirements and continued improvement in EH&S performance., • Organize, lead, and participate in activities that promote employee ownership and engagement in EH&S., • Participate and support the site's 1st, 2nd, and 3rd party EH&S audit programs., • Actively participate in PHA, PSSR, MOC, RCA work processes as leader, coordinator and/or participant as needed., • Manage site incident investigation system, ensuring proper classification, thorough root cause investigations and appropriate corrective actions to prevent recurrence are implemented., • Create "one-pagers" and communicate key learnings from events at the site and from the broader company network events., • Learnings shared with on-site personnel as well as sharing with the broader company network., • Provide in-plant support to site leadership, operators, mechanics, contractors, and technical staff to ensure proper safety evaluation is performed and work is completed within requirements., • Complete routine field line walks (observe and engage) to provide recognition, coaching, collaboration, and training., • Assist in development and communication of EH&S KPls (leading/lagging) on plant dashboards., • Gather data and maintain systems to track necessary information for internal safety, health and environmental reporting and to drive improvement in EH&S performance., • Support all environmental regulatory programs such as Air Quality (Title V), Stormwater management, waste management, Community RTK, and local POTW pretreatment program., • Support and contributes to required submissions for regulatory compliance on time and in full for proper submission to regulatory authorities - Title V, Annual Emission Inventory, Tier Il, Discharge Monitoring Report, et. al., • Ensure EH&S training is effective in sharing safety know-how needed to achieve world class safe operations., • Participate and work with the site EH&S committee to accomplish EH&S objectives and to maintain continued compliance with all requirements. Provide coaching at all levels of the organization., • Assist EHS Manager with case management, working closely with site leadership and business level occupational health professionals and the offsite clinic to manage injuries to the most positive case outcomes. Ensure proper injury, illness classifications and OSHA record keeping is completed. Education: • Bachelor's degree in engineering or related safety or environmental field is required. Experience: • Must have at least five or more years EH&S experience., • Demonstrated EH&S functional/technical expertise with strong working knowledge of OSHA regulations., • Experience with environmental regulatory filings for manufacturing operations., • Leadership skills and ability to work independently and collaboratively. Demonstrated ability to influence teams and resolve conflicts in support of organizational goals., • Excellent interpersonal skills; demonstrated ability to work effectively, professionally and respectfully in a team-based environment to involve peers, customers, line management and technical competency experts., • Experience with organizational culture change/development., • Demonstrated data management and analytical skills., • Must possess and/or demonstrate leadership competencies and behaviors (either through direct reports or project management/matrix environment)., • Hazardous waste manifesting experience or willingness to complete training;, • Demonstrated understanding and awareness of safety and environmental regulations., • Strong understanding of EHS principles and regulations., • Ability to work independently and collaboratively., • Ability to read, spell, comprehend, and perform and apply basic math skills;, • Excellent computer aptitude, communication and interpersonal skills;, • Computer skills - Email, SAP, Word Processing, Spreadsheets;, • Self-directed and self-motivated;, • Must possess strong communication and influencing skills utilizing courage and integrity;, • Good verbal and written communication skills;, • Understanding of Process Safety Management (PSM) preferred;, • Understanding of ISO 14001, ISO 45000, and ISO 50000 preferred. Work Environment • This is a full-time position. Days and flexible hours of work are required to meet facility demands. AAP/EEO Statement Roquette is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. "AAP, EEO, Drug-Free Workplace" Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you identify yourself in this position, please apply byuploading your resume and let's start the journey together! Roquette is proud to be a global company where you can find personal and professional growth through multiple diverse experiences. Roquette strives to create a dynamic workforce while remaining firmly committed to equal opportunity by complying with EEO laws. As we continue to grow, Roquette understands that to be successful we must always be inclusive in our approach. To find out more about our products, values and sustainable development ambitions visit us at ___ and at ___

Maintenance Mechanic Role with Global Product Leader / $25-$35 an hour depending on Experience / Excellent Benefits and Overtime This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $35 per hour A bit about us: We are a Repair Industry Leader that has been in business over 50 years looking for a Skilled Maintenance Technician to join our growing team. Why join us? $25-$35 an hour depending on Experience Great Benefits 6am-2:30pm Position Overtime Available Job Details We are seeking a skilled Maintenance Mechanic to join our team and ensure the safe, reliable, and efficient operation of our industrial fabrication equipment. This role involves performing preventive maintenance, troubleshooting, and repairs, as well as supporting fabrication activities such as laser welding and bending operations. Key Responsibilities: Follow preventive maintenance (PM) schedules to minimize downtime and extend equipment life. Diagnose, troubleshoot, and repair mechanical, electrical, hydraulic, and pneumatic issues on fabrication equipment. Perform fabrication work including laser welding, bending, and related processes to support equipment repairs and modifications. Maintain, repair, and improve industrial machinery and production support systems. Document maintenance activities, repairs, and parts usage accurately. Ensure compliance with safety standards and company procedures at all times. Collaborate with production teams to minimize equipment interruptions and maximize uptime. Qualifications: Proven experience as a Maintenance Mechanic or Industrial Maintenance Technician in a fabrication or manufacturing environment. Strong knowledge of mechanical systems, hydraulics, pneumatics, and electrical troubleshooting. Hands-on experience with laser welding, bending, and fabrication processes. Ability to read and interpret technical manuals, blueprints, and schematics. Strong problem-solving skills and attention to detail. Ability to work independently and manage time effectively. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description MIH Systems Group is a growing company in the evolving field of building commissioning, and we strive to make buildings work better. Specializing in the optimization of complex building systems, our team's diversified skill set provides value to our clients from the design stages of new construction all the way through operating existing buildings. Our consulting group provides a full array of commissioning services for both new and existing buildings, and our technical services group provides start-up services on complex HVAC equipment from a wide range of manufacturers. The MIH team consists of experienced industry-leading professionals, focused on logistical, energy and cost-effective solutions to our clients. The HVAC Service Technician specializes in the start-up and service of equipment for a variety of applications of air-conditioning, heating, ventilation, humidity control and energy management. We are searching for both experienced and entry-level HVAC technicians to help support the growing service business. The candidate must be able to troubleshoot and repair HVAC systems, be dependable and have good customer service skills. This role would service our NYC Metro area. Requirements: * 5+ years of solo field experience with commercial heating and air conditioning. (Journeyman) * Must have knowledge of commercial air-conditioning, heating, water source heat pumps & rooftop packaged HVAC systems. * Advanced knowledge of refrigeration. * Controls background a plus. * Manufacturing representative a plus. * EPA Type 1 & 2 of universal certification * Must have your own hand tools. * MUST have a clean driving record. * OSHA 10-hour training certification (preferred). Estimated Salary: $55/hr - $65/hr, with flexibility based on experience and skills. MIH Systems Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. You should be proficient in: • HVAC/R Systems, • Journeyman’s License, • OSHA 10-Hour Certification (OSHA 10), • HVAC Service & Installation, • HVAC Maintenance, • HVAC Troubleshooting, • HVAC Repair

Job Description Job Title: Field Service Technician Job Description The Field Service Technician travels daily to customer sites across New England to evaluate, maintain, and repair pumps and related equipment. This role combines hands-on mechanical work in the field and in the shop with accurate documentation in a CRM system, all performed with a strong focus on safety and customer service. Responsibilities • Travel daily to customer locations to evaluate the condition and performance of pumps and related equipment., • Diagnose mechanical, hydraulic, pneumatic, and electrical issues with pump systems using troubleshooting techniques, schematics, and blueprints., • Perform maintenance and repair of pumps and related equipment at customer sites, ensuring reliable and efficient operation., • Provide support for pump start-ups, including setting up and adjusting pump operational programs to meet customer requirements., • Utilize a CRM system to promptly and accurately complete service reports, documenting work performed, parts used, and recommendations., • Evaluate pump products in the shop, including disassembly and inspection, and prepare detailed evaluations and repair estimates., • Perform complete pump product repairs in the shop, from component replacement to reassembly and testing., • Participate in a rotating on-call schedule to provide after-hours field service support as needed., • Use and maintain basic hand and power tools safely and effectively during all service activities., • Follow all safety procedures and guidelines, completing every task with safety as a top priority., • Communicate clearly with internal teams and customers about findings, repair options, and next steps., • Strong mechanical aptitude with hands-on experience working on industrial equipment or similar machinery., • Proficiency in troubleshooting mechanical, pneumatic, hydraulic, and basic electrical issues., • Ability to read and interpret blueprints and schematics for pumps and related systems., • Experience performing field service work, including on-site maintenance and repair., • Competence in preventive maintenance practices for industrial equipment., • Ability to use and maintain basic hand and power tools safely and effectively., • Comfort working with a CRM or similar system to complete service reports and documentation., • Valid driver’s license with a clean driving record to support daily regional travel., • Strong attention to detail and commitment to safety in all work activities., • OSHA 10 certification., • Pump technician, field service technician, or similar industrial service role., • Experience with pump systems, including installation, start-up, and repair, is highly beneficial., • Familiarity with production and industrial environments., • Ability to work independently in the field and manage time and travel efficiently. You will join a leading organization in the pump industry that provides the tools and support you need to succeed, including the use of a dedicated service van for field work. The company emphasizes long-term career growth and offers clear opportunities to advance within the department. You will work in a culture that values safety, professionalism, and continuous learning, giving you the chance to build a stable, rewarding career while expanding your technical skills. Work Environment This role is primarily field-based, with daily travel throughout New England to industrial customer sites, as well as time spent in the shop for evaluations and repairs. You will work in industrial environments around pumps and related equipment, using basic hand and power tools and standard diagnostic equipment. The position requires flexibility to travel regularly and to participate in a rotating on-call schedule for after-hours support. Work conditions may include noisy areas, moving machinery, and varying site conditions, where adherence to safety procedures and appropriate work attire, including personal protective equipment, is essential. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $68000.00 - $83000.00/yr. Permanent role / company service van Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 21, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Raytheon - - Responsibilities: Follows blueprints, guidelines, and/or diagrams to ensure product specifications and tolerance levels are met; Performs troubleshooting, calibrations or modifications of hardware, fixtures and software; Uses measuring and diagnostic tools to test and modify systems an

Raytheon - - Responsibilities: Assemble electronic components, subassemblies, and systems using drawings, schematics, and process documentation; Perform functional and operational tests using standard electronic test equipment; Troubleshoot to the component or subsystem level under general supervis

Field Service Blow Mold Machinery - Passaic, NJ Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands . Requires Field Service Engineer with experience on Blow Mold and track record installing, repairing, troubleshooting, and maintenance for new and prior installs of custom Bottle Molding Machinery. Activities: • Join and support commissioning team in field for customer machinery installation projects. • Train end users on start up, operation and shut down procedures. • Recommend after-sale parts and components to compliment production line set up and manufacturing capabilities. • Conduct follow-up visits for preventative and escalated maintenance issues. Experience: • 3+ years troubleshooting and repairing industrial manufacturing machinery and auxiliary equipment. • Track record with servo motion systems in machines. • Ability to use electrical, pneumatic and hydraulic diagrams and schematics to diagnose problems in Computer Controlled machinery. • Hands-on experience setting up and operating programable controls including updating software. • Re-routing three phase wiring for new product line requirements. Excellent hourly compensation and generous overtime rates, end of year bonus, full medical, dental and vision benefits, matched 401(k), almost no weekend requirements. Employee perks include tuition reimbursement, travel reimbursement, paid training and paid time off for personal days, sick days, and vacations, company pays for holidays. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #43042NJ454 when responding. Diedre Moire Corporation Education Requirements: High School Minimum Experience Requirements: 2-5 years Job City Location: Passaic Job State Location: NJ Job Country Location: USA Salary Range: $80,000 to $140,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Field Service Mechanic Tech Maintenance Technician Engineer Install Repair Calibrate Maintain Extrusion Blow Molding Injection Blow Molding or Injection Stretch Blow Molding Equipment Extruders Injection Molder Blow Molders Screw Plasticizers Screw Rotating Motors Guide Rails Moving Platens Heater Bands Hydraulic Pumping Systems Pneumatic systems Die Heads Dies Molds Mold Clamps Cold and Hot Cutters Blow Pins Control Panels Instrumentation Motion Controllers Motors Actuators Sensors Pumps Valves Gearboxes Cooling Fans Heating Bands #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #fieldservicejobs #technicianjobs #MaintenanceMechanicJobs #PlasticJobs #BlowMoldingJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499.

Job Description: Lead and support manufacturing sites to develop and continuously improve preventive and predictive maintenance plans and execution of work management Complete maintenance assessments at manufacturing sites, identify opportunities, and lead the design and execution of improvement action plans Own and maintain one or more enterprise maintenance systems or standards, including documentation, training, assessments, and KPI’s Lead or support maintenance readiness activities for new capital equipment and design‑for‑reliability efforts Provide direction and guidance to the Reliability COE and the OLT regarding Technician Capability programs at manufacturing sites Monitor performance, identify improvement opportunities, hold sites accountable, and lead improvement activities Understand the current state of Technician Capability training programs at all manufacturing sites Lead all manufacturing sites to implement and sustain Technician Capability program standards, systems, and best practices Collaborate with manufacturing sites to understand Technician skill gaps and assist with improvement activities Create and maintain Technician Capability program documentation, including standards, flow charts, and OPL’s Calculate and publish Technician Capability management program KPI’s Lead a monthly Technician Capability management meeting inclusive of all manufacturing sites Plan and lead training events as necessary Collaborate with external Technician Capability management partners, including Amatrol, SACA, and VOLT Provide strategic guidance on training options including on‑site, local tech college, and on‑line delivery Work with HR and Legal resources on training funding and grant opportunities Provide support via TEAMS or on‑site as required Serve as a thought and technology leader in Technician Capability management Attend and actively participate in Reliability COE and Engineering meetings and events as required Requirements: Bachelor’s degree in engineering or equivalent experience 10+ years of experience in maintenance roles within a manufacturing environment Maintenance management experience strongly preferred Extensive manufacturing equipment and parts knowledge Experience with TPM, Lean Manufacturing, Kaizen, and 5S Extensive experience developing preventive and predictive maintenance plans Experience with major predictive maintenance technologies Experience implementing and managing Technician training programs Experience working with Amatrol and SACA Technician training programs Working knowledge of SAP for Work Management Working knowledge of SAP for MRO storeroom and materials management Advanced Excel skills for data analysis Working knowledge of SharePoint and TEAMS Proficiency using PowerPoint to create and deliver presentations Comfortable training and presenting to groups of all sizes and organizational levels Ability to travel (typical requirement will be 50%, though it may occasionally necessitate up to 75%) Benefits: Comprehensive healthcare plans wellness incentive program mental wellbeing support fitness reimbursement Great pay bonus incentive opportunity matching 401(k) stock purchase plan Career development opportunities employee resource groups on-demand learning tuition reimbursement Paid-time off parental leave flexible work-schedules volunteer opportunities

The Field Service Professional is a skilled technician, adept at performing a full range of equipment repairs on light repairs and maintains a variety of industrial equipment found within Home Depot and external customers' retail locations and manufacturing facilities, such as but not limited to pai

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance, and we make factories run better. Principal Duties/Responsibilities: To Live and Lead Safety · Takes responsibility for employee safety and wellness by deploying the ATS safety program and ensuring effective completion of safety training, observations, and incident investigations. · Implements and actively supports all Beyond Zero initiatives · Enables the growth of a customer safety culture by a fostering a safety partnership and sharing best practices To Inspire and Provide Clarity on Vision and Strategy · Motivates employees by communicating a clear vision that enables all employees to understand the rationale for, and the benefit of, both site-level and company-wide objectives · Acts as an effective change agent, leading the implementation of strategic initiatives through positive team communications, appropriate action planning, and successful implementation activities · Understands and appropriately articulates both ATS and customer strategies, providing the team with line of sight between team responsibilities and strategic outcomes To Own Our ATS Culture · Builds positive relationships with ATS employees, customers, and peers through open communication and role-modeling the ATS leadership core competencies of honesty and respect · Sets a positive, influential standard for others and creates a constructive climate for their team · Influences with transparency and use participative methods to ensure that decisions are understood and accepted · Establishes a positive work environment through managing and personalizing onboarding; engaging in ongoing one-on-one communications; and recognizing individual contributions and achievements on a timely basis · Adheres to policies and procedures and ensures that staff understands the rationale behind policies and processes To Support Our Employees’ Learning and Growth · Leads and builds team capabilities by working with individuals on performance improvement, career planning, training, and skills development. · Develops, communicates, and executes a Skills Matrix and Technician Training Plan · Builds and maintains a succession plan for key positions (i.e., Supervisors, Supply Chain, P/S, RE) To Ensure and Drive our Business Results · Leads and ensures the Operating System is understood, reinforced, and embedded · Develops and executes a site-specific maintenance plan per ATS standards · Manages financial performance of the site (revenue, expenses, and profit) to achieve set objectives · Develops and maintains effective relationships with all ATS business units, fully utilizing their services and ensuring cross-functional alignment · Collaborates with and builds customer relationships to ensure priority alignment and proactively anticipates customer needs as the primary on site contact · Ensures alignment of customer expectations and ATS site goals through management of site-specific contracts · Communicates with the customer through daily, weekly, and monthly meetings and conducts a regular review of the performance metrics with the customer · Drives a continuous improvement methodology and promotes cost savings · Analyzes and reports on key performance indicators, completing root cause analyses and developing and executing action items while removing barriers and addressing issues · Collaborates with sales and operations leadership to increase the scope of services Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · Bachelor’s degree in technical, business, or a related field preferred or seven years of operations / maintenance experience · Three years of supervisory experience with a strong focus on development of employees · Resilient and flexible, able to multitask and prioritize with an innate ability to understand and accept change and motivate others around change · Highly tuned emotional intelligence with demonstrated ability to build relationships and lead teams with honesty and integrity to achieve goals · Solid understanding of manufacturing / assembly work environment · Business acumen · Positive influencer with appropriate levels of organization. · Strong customer focus with the ability to build positive business relationships and show a sense of urgency Desirable KSAs · Manufacturing maintenance experience preferred with related certifications and training · Good understanding of, and/or experience with, proactive/reliability maintenance processes, i.e., Planning/Scheduling, P/M, PdM, and root cause analysis, and continuous improvement methodologies · Good computer skills, including Microsoft applications and web-based applications such as Power BI, GEAC, Concur, Workday and related software · Time management skills · Ability to relocate to specified locations · Excellent communications skills (verbal, written, and presentation) · Agile, curious learner and authentic, credible teacher · Financial acumen and knowledge of forecasting and managing budgets Leadership Core Competencies: Business and Company Acumen Lead with honesty and integrity Build bold and relevant strategies Welcome and motivate change Recognize the right outcomes and how they were achieved Role model safety and wellness Emotional Intelligence Provide psychological safety Be self-aware Build relationships Ask for and act on feedback Respect diverse background and viewpoints Lead in the Present; Eye to the Future Commit to accountability Coach people to their potential Own talent development and placement Turn problems into opportunities Be resilient and flexible Communicate, Communicate, Communicate Practice transparency Build relationships through respect Be a curious learner and credible teacher Influence in a proactive, positive way Ensure cross functional awareness/decisions ATS is committed to providing equal employment opportunity in all aspects of employment to all applicants and employees, regardless of age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information or other legally protected status.

Job Title: Field Service Technician. The Field Service Technician I serves as the primary on-site technical representative for a global leader in Plastics manufacturing Industry. The technician acts as a vital communication link between the client and the corporate engineering and project management

As an Order Fulfillment Technician, you are responsible for the final stage of the product's lifecycle in our manufacturing facility.This position's main function is pulling sales orders and preparing them for delivery, verifying accuracy of product type and quantity.Additionally, the Order Fulfillm

As a part of the global industrial organization Marmon Holdings—which is backed by Berkshire Hathaway—you'll be doing things that matter, leading at every level, and winning a better way.We're committed to making a positive impact on the world, providing you with diverse learning and working opp

Marmon - - Responsibilities: Maintain and repair all production equipment; Perform preventive maintenance to production equipment; Manage contractors performing repairs and improvements to the facility: Create scope of work, receive quotes and manage; Call in/guide Contractors to repair break downs

Leading industrial manufacturer seeking skilled Controls Service Technician (some travel required) This Jobot Job is hosted by: Gabriel Ozuna Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $67,000 - $100,000 per year A bit about us: For over 50 years, we have been a leading supplier of industrial machinery to manufacturers around the world. No manufacturer can offer the same customizable manufacturing equipment across such a diverse assortment of industries, applications, and structures. Why join us? • We are a leader in our industry, • We offer long term career stability, • Opportunities for continued learning, development & advancement, • Excellent pay, • Great benefits, • Positive company culture, • Ability to make an immediate impact Job Details Job Overview: You will collaborate closely with our engineering and production teams, serving as the subject matter expert for our control’s platform. In this role, you will support our service technicians in the installation, troubleshooting, maintenance, and retrofitting of PLC-based control systems utilized in hydraulic and servo-electric presses. Key Responsibilities: • Control System Troubleshooting & Repair: Diagnose and repair PLC-based press control systems, hydraulic motion control circuits, and servo systems., • Installation & Commissioning: Install, configure, and commission control systems for hydraulic and servo electric presses, ensuring proper integration of PLCs and peripherals, • Retrofits & Upgrades: Assist in modernizing hydraulic press controls, upgrading outdated PLCs, HMIs, motion controllers, and hydraulic servo systems for improved performance and automation., • Field Service & Customer Support: Provide on-site and remote troubleshooting for hydraulic and servo electric press controls, minimizing downtime, and ensuring customer satisfaction., • Programming & Debugging: Develop, modify, and troubleshoot PLC logic, HMI screens, motion control programs, and press automation sequences., • Preventive Maintenance & Optimization: Conduct control system inspections and hydraulic system tuning to enhance system performance and reliability., • Documentation & Reporting: Maintain service reports, control schematics, wiring diagrams, and software backups for customer and internal records., • Training & Collaboration: Work closely with engineering, production, and service teams to provide training and guidance on press control systems. Preferred Skills: • Bachelor’s degree in a technical field, most commonly Electrical or Mechanical Engineering, • 5-7 years’ experience in a manufacturing environment, • 7-10 years industry experience without a bachelor’s degree, • Self-starter who is adaptable to work independently and within a team environment, • Excellent communication skills and the ability to work in an interactive group environment are essential. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Secur-Serv is a leading managed services provider of IT, print, and hardware services, with a security focus at the core of every service. Secur-Serv provides nationwide, on-site service to businesses of every size, focusing on the financial, manufacturing, transportation, and healthcare industries. Secur-Serv is headquartered in Omaha, NE, and services our customers throughout the continental United States and Canada. Why Secur-Serv? Join Secur-Serv because we are committed to professional and personal growth, working with employees to develop a defined career path and helping them achieve their career goals with internal and external training and tuition reimbursement. We empower our employees to innovate and be a part of solutions that improve processes, systems, and transformation. We recognize and provide an environment where each and every employee can make an impact. • Company car that is available for personal use, • Paid Training, • We have a generous benefits package for our regular full-time employees, which includes a copay medical plan option, HSA medical plans with employer contributions to your HSA Account, dental, vision, company-paid life insurance, and company-paid short- and long-term disability coverage., • Plan for your future with Secur-Serv’s 401K savings plan with a generous company match. You are vested on your first day of eligibility in the plan., • Participate in our wellness program to improve your health and earn a discount on your health insurance premiums., • Explore new education opportunities with our Tuition Reimbursement Plan which covers up to $5,250. ESSENTIAL RESPONSIBILITIES • Travels to customer locations via company vehicle to diagnose, repair, and/or replace computer hardware in accordance with service agreements., • Manages preventative maintenance schedule in a timely and efficient manner., • Assists other territories and technicians as needed which may include travel to other metropolitan areas., • Takes ownership of meeting customers’ business needs., • Coordinates activities and seeks assistance from technical support when appropriate., • Provides updates, status, and completion information to manager, sales, technical support, call center, and customer via voicemail, use of wireless call processing system, or in-person communication., • Manages parts inventory in accordance with established guidelines., • Submits required paperwork in a timely, efficient, and complete manner., • Two or more years related experience and/or training., • Secur-Serv provides training at the office in Omaha, NE, along with, access to a database of manuals and depot support personnel to call if additional support is needed., • Able to successfully attend training in Headquarters and/or outside schools to keep abreast of new technology and hardware product developments., • Valid and current state Driver's License., • Self-motivated and able to work effectively under minimal supervision., • Knowledge/Skills/Abilities:, • Ability to diagnose equipment operational errors and product failures., • Must be able to problem solve, think analytically and be attentive to detail., • Good verbal communication skills for interaction with customers., • Physical Demands:, • Regularly required to stand, walk, sit, talk, write, and hear., • Reach with hands and arms and stoop, kneel, bend, crawl, push/ pull, twist and turn., • Frequently lift and/or move up to 25 pounds., • Occasionally lift and/or move up to 50 pounds, • Must be able to meet all physical requirements up to eight hours per day., • Able to travel overnight 5-10%.Preferences, • Associates degree (AA) or equivalent from two-year college or technical school preferred. WE ARE AN EQUAL OPPORTUNITY EMPLOYER. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. Applicants who have disabilities may request that accommodations be made in order to complete the selection process by contacting our People Department by emailing or calling 402.697.3039. EEO is the law. To review your rights under Equal Employment Opportunity please visit: . Secur-Serv Drug & Alcohol Use Policy Powered by JazzHR omFICGoY8N

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. * Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. * Demonstrating a willingness to help others and be a team member * Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. * Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. * Provide voice of Customer feedback. * Through service and Customer relationships, build brand dedication. * Conduct travel and work in a safe manner, constantly learning new technology and soft skills. * Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. * Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: * Proficient verbal and written communication and Customer relation skills. * Able to interact and effectively communicate in person and over the phone with customer and co-workers. * Present a professional image. * Must be adaptable to changes and able to deal with change, delays, or general work-related issues. * Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. * Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). * Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. * Basic mechanical and logical solving skills are a must. * Rational decision making and problem-solving skills. Work Environment * Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: * Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: * We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution Tuition reimbursement * Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: * Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. * Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. * Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. * Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1438B, Brooklyn NY

Job Description MIH Systems Group is a growing company in the evolving field of building commissioning, and we strive to make buildings work better. Specializing in the optimization of complex building systems, our team's diversified skill set provides value to our clients from the design stages of new construction all the way through operating existing buildings. Our consulting group provides a full array of commissioning services for both new and existing buildings, and our technical services group provides start-up services on complex HVAC equipment from a wide range of manufacturers. The MIH team consists of experienced industry-leading professionals, focused on logistical, energy and cost-effective solutions to our clients. The HVAC Service Technician specializes in the start-up and service of equipment for a variety of applications of air-conditioning, heating, ventilation, humidity control and energy management. We are searching for both experienced and entry-level HVAC technicians to help support the growing service business. The candidate must be able to troubleshoot and repair HVAC systems, be dependable and have good customer service skills. This role would service our NYC Metro area. Requirements: * 5+ years of solo field experience with commercial heating and air conditioning. (Journeyman) * Must have knowledge of commercial air-conditioning, heating, water source heat pumps & rooftop packaged HVAC systems. * Advanced knowledge of refrigeration. * Controls background a plus. * Manufacturing representative a plus. * EPA Type 1 & 2 of universal certification * Must have your own hand tools. * MUST have a clean driving record. * OSHA 10-hour training certification (preferred). Estimated Salary: $55/hr - $65/hr, with flexibility based on experience and skills. MIH Systems Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. You should be proficient in: • HVAC/R Systems, • Journeyman’s License, • OSHA 10-Hour Certification (OSHA 10), • HVAC Service & Installation, • HVAC Maintenance, • HVAC Troubleshooting, • HVAC Repair