Manufacturing technician jobs in Tampa, FloridaCreate job alerts

Job Description Batchmaker Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. ICP Group is comprised of market leading brands known for innovation, quality, and performance. Founded in 2015 and supported by a lean corporate team, ICP Group has scaled rapidly through organic and acquisition growth into one of the largest coatings, adhesives, and sealants companies in North America. ICP Group is headquartered in Andover, MA and has manufacturing and distribution sites throughout North America, Latin America, UK, Europe and the Asia Pacific region. Shift hours: 7am to 3:30pm. We work OT and Saturdays during our peak season. Position Purpose ICP is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. The Chemical Operator/batchmaker role consists of adding the indicated raw materials to a mixer following a batch instruction sheet with special attention to quality, follows established standard operating procedures with attention to safety rules and company policies. Key Responsibilities • Follows daily scheduled activities as indicated by supervisor., • Ability to handle chemicals in a safe manner., • Batching/weighing/sampling material., • Blend and weigh ingredients to the specifications of the SOP., • Follows standard operating procedures, company policies and safety regulations., • Assists in maintaining good housekeeping in work area and throughout the facility., • Responsible for the daily upkeep of work area and any equipment included in it., • Promptly reports any problems or out of the ordinary situations to supervisor., • Maintain schedule efficiency to meet production demand., • Maintains close communication with supervisor and QC technician during the batch process., • Responsible for reporting and/or recording inventory movements resulting from each batch onto a batch sheet., • Performs periodic sampling for quality control., • Follows direction from supervisor and/or QC technician to ensure product meets established quality control standards., • May be required to assist in general labor tasks as needed and indicated by supervisor., • May be required to assist in the training of new personnel on the safe operation of mixing equipment., • Must have good attendance record and be on time., • The above listing of primary functions is not to be considered an all-inclusive list of duties., • Experience and Skills Requirements, • Ability to comprehend and abide by relevant policies/procedures pertinent to safety, quality, security, and operations., • Strong Attention to detail., • Forklift experience a plus., • Ability to Multi-task and watch multiple processes at the same time., • Experience reading and working with SOPs a plus., • Have experience working with chemicals and/or light chemical manufacturing is preferred., • Have basic math skills and be able to apply them in a work environment., • Ability to be flexible and adaptable, and change priorities and direction as needed., • Must have a positive attitude towards work and can work well as a member of a team., • After receiving training, employee must be able to show understanding and competency on safety rules and regulations by written or verbal examination., • Ability to understand and follow posted signage throughout the facility., • Clear understanding of lock-out, tag-out procedures., • Must be familiar with the standard operating procedure and operator manual for the safe operation of the equipment., • Clear understanding of Hazard communication policies., • Working Conditions:, • Required to have 20/20 vision or corrected 20/20., • Employee must be able to hear and speak., • Employee must have full range of motion to stand, walk, sit, reach, climb, stoop or kneel., • Employee must be able to complete repetitive strenuous work under varying climate conditions., • Employee must be able to safely lift up to 70 Lbs., • Employee must be able to stand for extended periods., • Must be able to work in a plant environment with varying levels of temperature and physical requirements. ICP Group is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Powered by JazzHR G6SFCZvH5I

Job Description About the Role We’re hiring a Quality Inspector to support our electronics manufacturing operations. In this role, you’ll be responsible for inspecting printed circuit boards (PCBs), assemblies, and sub-assemblies to ensure they meet strict quality standards. This is a detail-oriented position requiring strong visual inspection skills, use of magnification tools, and accurate data entry into inspection systems. Key Responsibilities • Perform routine and repetitive inspections to ensure quality at multiple stages of production., • Inspect in-process and finished assemblies for conformance to quality assurance standards., • Follow visual aids, ECNs, and operating procedures to determine acceptance or rejection., • Conduct inspections using magnifying glass, lot sampling methods, first article checks, and AOI machines., • Record pass/fail data in computerized MES systems., • Communicate quality findings to supervisors and support continuous improvement., • High School diploma or equivalent., • 2+ years of quality inspection experience in manufacturing (electronics/PCB preferred)., • QC certification required., • Experience in printed circuit board manufacturing or related technical field preferred., • Strong attention to detail and ability to follow standardized processes., • Health, dental, and vision insurance (via Pro-Tech Staffing)., • Temp-to-hire opportunity with potential for long-term placement. Quality Inspector, Electronics Inspector, PCB Inspector, Quality Control Technician, QC Inspector, SMT Inspector, AOI Operator, Manufacturing Inspector, Quality Assurance Technician

Job DescriptionDiversified Sourcing Solutions is hiring for Maintenance Technician in the Tampa, FL area! This role offers opportunity for growth and advancement. Ideal candidates will have previous experience in a manufacturing environment. Responsibilities: • Perform routine and emergency maintenance on conveyors, motors, gearboxes, and other mechanical systems, • Repair and Troubleshoot machines, • Previous experience with lockout/tagout procedures ito ensure safe maintenance practices, • Conduct inspections and preventative maintenance according to established schedules, • Maintain accurate records of repairs, inspections, and parts usage, • Colloborate with operations and safety teams to indentify and resolve equipment issues, • Respond promptly to maintenance requests and prioritize tasks effectivelyRequired Qualifications:, • 1-2 years working experience in a manufacturing environment, • High School diploma or equivalent, • Ability to follow instructions and procedures, • Ability to read/write simple instructions and communicate effectively with team members, • Ability to lift 80 pounds periodically throughout the day, • Monday- Friday, • Health, • Dental, • Vision

Job DescriptionDo you like working with your hands? Do you enjoy variety in your work? Surface Experts Technician might be the job for you! Enjoy using your creativity to problem-solve repairs that typically take less than an hour. Surface Experts is a national brand that is in the process of growing our local team. We are looking for a person to fill our field technician role. Both men and women make great Surface Experts techs, but there are a few requirements that help us determine whether someone will have the skill set to be able to learn quickly. A Day in the Life of a Surface Experts Technician: Benefits/Perks: • Base Salary + Bonus Opportunity: Performance-based commissions starting on day 1, • Great Work/Life Balance: No required overtime, no nights, no weekends, • Time Off: Paid holidays and accruable vacation, • Flexible work schedule: Can accommodate midweek appointments, • Paid New Hire Training: Onboarding includes learning alongside a trained technician, • Company Car: Each technician drives a branded company vehicle for job duties, • Tools Included: All necessary tools and product are provided, • Learn a New Trade: Develop skills in a brand new emerging trade, • Supportive Work Environment: Team celebrates achievements and collaborates in their approach to problem-solving, • Small Business: Local business with an owner who works alongside the team each day, • Mentorship Opportunities: Ongoing repair training and career development, • Dedicated Help Lines: Technician Support Team on call to assist to questions Our Core Values: • Serve Others, • Be a Problem Solver, • Trust the Process Our Mission: Our mission is to develop outstanding teams by investing in strong relationships. Together we work to solve our customers problems by reducing the waste of time, money and materials which end up in landfills. Job Duties and Responsibilities: In the Field Daily • On the jobsite for 4+ customers per day, • On-site Work Orders, customer service, and follow-ups, • Working for a variety of customers in different industries including Property Management, Hotels, Movers, Builders, etc. Customer Service and Communication • Display world-class customer service for tenants and property management staff, • Track work progress and notes in our CRM/Dispatch tool, • Communicate with support team with questions Follow Repair Process • Understand and utilize our unique 5-step repair process, • Employ each tool in your custom tool-kit, • Problem-solve repairs with creativity We are looking for someone who has experience as a tile setter. You will use your knowledge of different types of tile (porcelain, ceramic and natural stone) to create repair solutions. Additionally, experience with installation in a variety of locations (ex: Shower walls and floors, backsplashes and high traffic areas) will help as you problem-solve. Preferred Qualifications: • Experience working with your hands - This could be in construction, manufacturing, painting, or even a personal hobby, • Experience working in facilities maintenance can be a big plus, but is not required, • An ability to identify, compare, and recreate colors - Understanding color and how to match color is a large part of what we do. An art background is helpful, but not necessary., • Willingness to commit to learning a skill that may take months to master. What We Value: • Attention to detail, • Enjoy working with a team, • Ability to manage your own schedule, • Customer service experience, • Excellent work ethic

Job DescriptionBenefits: • Bonus based on performance, • Training & development Surface Experts is a national brand that is in the process of growing our local team. We are looking for a person to fill our field technician role. Both men and women make great Surface Experts techs, but there are a few requirements that help us determine whether someone will have the skill set to be able to learn quickly. A Day in the Life of a Surface Experts Technician: Benefits/Perks: • Base Salary + Bonus Opportunity: Performance-based commissions starting on day 1, • Great Work/Life Balance: No required overtime, no nights, no weekends, • Time Off: Paid holidays and accruable vacation, • Flexible work schedule: Can accommodate midweek appointments, • Paid New Hire Training: Onboarding includes learning alongside a trained technician, • Company Car: Each technician drives a branded company vehicle for job duties, • Tools Included: All necessary tools and product are provided, • Learn a New Trade: Develop skills in a brand new emerging trade, • Supportive Work Environment: Team celebrates achievements and collaborates in their approach to problem-solving, • Small Business: Local business with an owner who works alongside the team each day, • Mentorship Opportunities: Ongoing repair training and career development, • Dedicated Help Lines: Technician Support Team on call to assist to questions Our Core Values: • Serve Others, • Be a Problem Solver, • Trust the Process Our Mission: Our mission is to develop outstanding teams by investing in strong relationships. Together we work to solve our customers problems by reducing the waste of time, money and materials which end up in landfills. Job Duties and Responsibilities: In the Field Daily • On the jobsite for 4+ customers per day, • On-site Work Orders, customer service, and follow-ups, • Working for a variety of customers in different industries including Property Management, Hotels, Movers, Builders, etc. Customer Service and Communication • Display world-class customer service for tenants and property management staff, • Track work progress and notes in our CRM/Dispatch tool, • Communicate with support team with questions Follow Repair Process • Understand and utilize our unique 5-step repair process, • Employ each tool in your custom tool-kit, • Problem-solve repairs with creativity We are looking for someone who has experience in making or repairing furniture. You will use your background in carpentry or fine woodworking. Having a good understanding of the different finishes such as lacquer, varnishes, oils and blends is very helpful when assessing how to repair a damaged piece of furniture. Preferred Qualifications: • Experience working with your hands - This could be in construction, manufacturing, painting, or even a personal hobby, • Experience working in facilities maintenance can be a big plus, but is not required, • An ability to identify, compare, and recreate colors - Understanding color and how to match color is a large part of what we do. An art background is helpful, but not necessary., • Willingness to commit to learning a skill that may take months to master. What We Value: • Attention to detail, • Enjoy working with a team, • Ability to manage your own schedule, • Customer service experience, • Excellent work ethic

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Company parties, • Competitive salary, • Free uniforms, • Opportunity for advancement, • Paid time off Requirements: • Experience of working with your hands, whether thats in construction, manufacturing or even a hobby., • Having experience and knowledge working in residential and commercial properties can be very helpful., • It is helpful, but not necessary to have an art background. Understanding color and how to match color is a large part of what we do. If you are color blind than this is not the job for you., • Attention to detail., • Commitment to meet project timelines., • Customer service experience., • We offer a very competitive base pay with bonus opportunity!, • Each Full Time Field Technician is also eligible to receive company car after a 90-day probationary period or car allowance. Job Types: Full-time, Part-time Pay: $17.00 - $20.00 per hour Hostess Waitress Waiter Bar Tender Hotel Multi-Family Apartments Leasing Agent Experience a Day-in-the-life of a Surface Experts Technician:

Job DescriptionSalary: $18 - $25/hour - DEPENDING ON EXPERIENCE About Us Global Environmental & Industrial Response (GEIR) partners with clients across utilities, mining, chemical, pulp & paper, and manufacturing industries to deliver innovative environmental, health, and safety solutions. Our highly trained teams provide 24/7 industrial cleaning, hydro blasting, vacuum truck services, and specialized solutions for sulfuric acid facilities, including maintenance, repairs, and full turn-key turnaround services. We also manage waste handling, transportation, and disposal in strict compliance with local, state, and federal regulations. Position Overview Global Environmental & Industrial Response (GEIR) is seeking motivated Industrial Field Technicians to join our team. As a Field Technician, you will operate specialized equipment and tools to perform industrial and environmental cleaning at client sites. This includes the safe operation of high-pressure water-blast units and industrial vacuum units to clean customer systems such as pipes, boilers, and tanks. This is a hands-on, physically demanding role that is vital to our service operations. Essential Functions • Arrive on time at the office or job site, in uniform, properly groomed, and ready to work., • Set up job sites for vacuum truck and other environmental services, including equipment, tools, barricade tape, and tags., • Safely operate high-pressure water-blast units to clean customer systems., • Follow all GEIR safety standards and protocols., • Participate in daily manual and practical activities., • Perform strenuous physical labor, including lifting, pulling, and pushing heavy objects., • Clean and maintain equipment before returning to the GEIR office., • Communicate effectively with the Crew Lead or Field Supervisor regarding safety, quality, and integrity., • Perform additional duties as assigned. Key Behaviors • Passionate, motivated, and open to growth and challenges., • Proactively build customer relationships and provide thoughtful solutions., • Maintain a professional appearance and represent Stepps with pride., • Strive for continuous improvement by embracing new tools and processes., • Demonstrate respect toward co-workers and foster a positive team environment., • Promote opportunities within the company and through referrals. Required Skills & Qualifications • Must be able to pass a drug test., • Ability to carry/move up to 50 lbs., • Capable of performing manual labor outdoors in various weather and environmental conditions., • Prior industry experience required., • Willingness and ability to work in confined spaces, elevated spaces, and hot, wet, cold, or foul-smelling environments during 812-hour shifts, often while handling vacuum hoses., • Ability to use a respirator in environments with potential chemical or fume exposure; may be required to be clean-shaven., • Willingness to work shifts longer than 8 hours and to respond to emergencies as needed., • 24 years of hands-on experience with tools and heavy equipment preferred., • Ability to follow training and standard operating procedures., • Ability to physically control industrial hydro-blasting and vacuum equipment., • Basic mechanical skills preferred., • Valid drivers license with a clean 3-year motor vehicle record preferred. Pay • $18 - $25/hour (Pay is commensurate with prior experience) Benefits • 6 Paid Holidays (New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving, Christmas), • Medical, Dental, and Vision coverage; Free Term Life Insurance, • Paid Time Off (accruals start on day 1; available after 90 days), • 401(k) match up to 4%, • Regular pay increases and career development opportunities, • Accident, cancer/critical illness, short-term and long-term disability, and hospital indemnity insurance available Drug-free workplace. Background check required. Global Environmental and Industrial Response is an Equal Opportunity Employer. Military Veterans are Encouraged to Apply.

Job Description LCS Electrical and Automation Technician Who We Are: Krones Process Group North America is the subsidiary of the Krones Group, a global leader in the supply of beverage and liquid food filling and packing lines. Krones Process Group North America provides turnkey hygienic process solutions for the brewery, beverage, liquid food, dairy, and HPC industries. We have internal dedicated teams to support the entire process from sales to project management, engineering (design, process, automation), procurement, manufacturing, installation, and after-market lifecycle services support. We deliver the highest quality found in the industry, tailored to fit our customers specific needs. Reasons To Join Our Team: At Krones Process Group North America we are seeking individuals to join our team who have fresh ideas and are open to change. All team members have a voice and are encouraged to provide input. The future of Krones Process Group North America is focused on growth, and the continued development of our team. We offer a full benefits package to include Competitive pay, Health, Dental, Vision, STD, LTD, Employer Paid Life, Voluntary Life, Generous Vacation and Sick/Personal Time, and 401K with company match. Job Purpose or Summary: The Electrical and Automation Technician is responsible for supporting customers with more technical issues including software troubleshooting and minor programming edits as assigned by the LCS Service Manager. Cross training for supporting new greenfield and brownfield projects will be included. Service work for troubleshooting liquid food and beverage processing equipment will be common. They are to adhere to all Krones Process Group North America work instructions, and safety policies. Engagement in Continuous Improvement and Lean Initiatives is also required. The Automation Field Service Technician works through a detailed job Skills Matrix, providing advancement, accountability, and personal growth. Job Duties and Responsibilities: • Troubleshoot automation issues remotely or at customer site., • Troubleshoot electrical issues with VFD’s, I/O, PLC, HMI, etc., • Addressing of devices., • Low voltage wiring and troubleshooting., • Instrument calibration, • Assist project Automation Engineering team on new brownfield and greenfield projects., • Assist with equipment and systems I/O checkout, commissioning, etc., • Develop advanced skills and competence from the Skills Matrix., • Understand 3A procedures and requirements for food-grade processing systems., • Identify deficiencies and assist in developing methods and procedures for improving processes., • Train new team members as required in the Skills Matrix., • Maintain up to date safety training per company standards., • Accurately fill out all required documentation, time sheets, Field Service Reports, etc., • Accurate use of time-keeping system., • Assist estimating and quotation of LCS work as assigned., • Perform other duties as assigned. *An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position. Preferred Qualifications: Education: Advanced education in automation engineering, or relevant hands-on experience. Experience/Training: 5+ years of experience with Automation Engineering of Process Equipment, preferably in the Beverage and / or food industries. Experience/Training (Mechanical and Electrical troubleshooting and repair): Secondary experience in Mechanical and Electrical troubleshooting issues and repairs. Ability to read P&ID’s and electrical schematics. Strong Electrical aptitude. Professional Skills • Lead and manage small projects with multiple team members., • Knowledge of metric and standard measurement systems., • Basic computer skills are required (Outlook, Excel, Word, etc. General social skills, capacity for teamwork, problem-solving competence, general project management, time and self-management, coordination and organizational skills, and communication skills, both written and orally. Self-starter is a must. Physical / Working Demands • Generally good working conditions in both a manufacturing plant and customer’s sites. Moderate physical effort including frequent standing/walking and occasional exposure to high noise levels is required. During the summer months, exposure to heat and humidity may occur. Lifting/carrying/pushing/pulling of objects weighing 30-50 pounds (10%). Manual dexterity and typing are required (60%). Stooping, kneeling, bending, and crouching are required (30%). Noise levels in work areas may fluctuate from 82 to 110 decibels., • Equipment used includes calculators, measuring devices, hand tools, and voltage meters., • Ability to understand both spoken and written directions and good vision required., • Personal protective equipment required includes protective-toed safety shoes and safety glasses with side shields, hard hat, respirator (in some cases may be required)., • Appropriate OSHA and/or Krones Process Group North America safety training(s) are required., • Maintain a safe working environment and comply with all safety and environmental policies/procedures. Each employee is to place environmental health and safety requirements as the priority in the performance of their work duties. An employee is responsible for notifying their immediate supervisor of a violation or deficiency in working conditions and for recommending corrective measures, if possible. Additionally, the employee’s immediate supervisor is to be notified of every injury or illness, or near miss., • Extended overnight trips to the customer’s site are expected. Hotel costs are currently covered by a company provided expense account and credit card. Per diem will be expensed out on the same report and deposited by direct deposit., • Travel by means of a company vehicle, plane or other modes of transportation as needed (30% to 9*0%.

Job DescriptionDo you like working with your hands? Do you enjoy variety in your work? Surface Experts Technician might be the job for you! Enjoy using your creativity to problem-solve repairs that typically take less than an hour. Surface Experts is a national brand that is in the process of growing our local team. We are looking for a person to fill our field technician role. Both men and women make great Surface Experts techs, but there are a few requirements that help us determine whether someone will have the skill set to be able to learn quickly. A Day in the Life of a Surface Experts Technician: Benefits/Perks: • Base Salary + Bonus Opportunity: Performance-based commissions starting on day 1, • Great Work/Life Balance: No required overtime, no nights, no weekends, • Time Off: Paid holidays and accruable vacation, • Flexible work schedule: Can accommodate midweek appointments, • Paid New Hire Training: Onboarding includes learning alongside a trained technician, • Company Car: Each technician drives a branded company vehicle for job duties, • Tools Included: All necessary tools and product are provided, • Learn a New Trade: Develop skills in a brand new emerging trade, • Supportive Work Environment: Team celebrates achievements and collaborates in their approach to problem-solving, • Small Business: Local business with an owner who works alongside the team each day, • Mentorship Opportunities: Ongoing repair training and career development, • Dedicated Help Lines: Technician Support Team on call to assist to questions Our Core Values: • Serve Others, • Be a Problem Solver, • Trust the Process Our Mission: Our mission is to develop outstanding teams by investing in strong relationships. Together we work to solve our customers problems by reducing the waste of time, money and materials which end up in landfills. Job Duties and Responsibilities: In the Field Daily • On the jobsite for 4+ customers per day, • On-site Work Orders, customer service, and follow-ups, • Working for a variety of customers in different industries including Property Management, Hotels, Movers, Builders, etc. Customer Service and Communication • Display world-class customer service for tenants and property management staff, • Track work progress and notes in our CRM/Dispatch tool, • Communicate with support team with questions Follow Repair Process • Understand and utilize our unique 5-step repair process, • Employ each tool in your custom tool-kit, • Problem-solve repairs with creativity We are looking for someone who has experience working with stone masonry or countertops. Your familiarity with natural stones as well as synthetic materials such as quartz will assist in creating custom repairs to unique damage. Attention to detail is key in repairing small damage to stone surfaces. Preferred Qualifications: • Experience working with your hands - This could be in construction, manufacturing, painting, or even a personal hobby, • Experience working in facilities maintenance can be a big plus, but is not required, • An ability to identify, compare, and recreate colors - Understanding color and how to match color is a large part of what we do. An art background is helpful, but not necessary., • Willingness to commit to learning a skill that may take months to master. What We Value: • Attention to detail, • Enjoy working with a team, • Ability to manage your own schedule, • Customer service experience, • Excellent work ethic

Job Description Maintenance Technician (7:00am-7:00pm, 7:00pm-7:00 am) Who we are looking for: We are currently searching for a Maintenance Technician to be based out of Tampa, FL. Reporting to the Maintenance Manager, the Maintenance Technician will be responsible for maintaining production and quality standards by ensuring the continuous operation of machinery and mechanical equipment. What you'll do: • Maintain and repair equipment used to manufacture, package, and convey PVC conduit, • Modify equipment to aid and improve the manufacturing process, • Ensure safe and operable condition of machinery and mechanical equipment by completing PM requirements on engines, motors, pneumatic tools, conveyor systems and production machines per manufacturer's instructions, • Assist in all aspects of installation, modification, maintenance and repair or plant manufacturing equipment and systems, • Perform maintenance on building and grounds, • Follow diagrams, sketches, operation manuals, manufacturer's instructions to troubleshoot malfunctions, • High school diploma or equivalent, • Strong mechanical and electrical skill set, • 1-3 years experience performing electrical/mechanical maintenance in an industrial manufacturing environment, • Ability to lift 50 pound unassisted, • Completed all required training Atkore is a five-time Great Place to Work© certified company and a three-time Top Workplaces USA award winner! We’re committed to creating an engaged, aligned workforce driven by a collaborative culture. Our team strives for breakthrough results and stays focused on being standout leaders. We consistently live the Atkore mission, strategic priorities, and behaviors consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $25.50 per hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life Insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications are being accepted on an ongoing basis.

Job Description Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. ICP Group is comprised of market leading brands known for innovation, quality, and performance. Founded in 2015 and supported by a lean corporate team, ICP Group has scaled rapidly through organic and acquisition growth into one of the largest coatings, adhesives, and sealants companies in North America. ICP Group is headquartered in Andover, MA and has manufacturing and distribution sites throughout North America, Latin America, UK, Europe and the Asia Pacific region. Under the direction of the Plant Manager, and Maintenance Manager, provide maintenance support for both mechanical and electrical equipment ensuring the plant operates at the highest level of uptime and efficiency. Perform all maintenance functions within company defined Environmental, Health and Safety guidelines and sustain a clean and organized maintenance department. Key Responsibilities • Adhere to all OSHA safety requirements as it relates to the duties of maintenance operations., • Complete all required OSHA or corporate training courses as defined by management before conducting tasks., • Wear proper PPE as required for the task at hand., • Under the direction of the Maintenance Manager, perform preventative and corrective maintenance activities., • Install or repair pumps, motors, conveyors, filler lines, plant equipment or other devices required to maintain production uptime., • Typical equipment includes, but not limited to: 1) process pumps and mixing equipment, 2) pneumatic components and control systems, 3) hydraulic components and control systems, 4) power transmission systems (gearboxes, chains, drives, etc), 4) relay logic, 5) field instrumentation, 6) PLC/DCS troubleshooting., • Troubleshoot equipment issues and provide supervisor or management a repair solution including parts list and timeline., • Perform basic electrical tasks such as wring motors, VFD’s control panels or other low and high voltage equipment., • Maintain maintenance shop in a clean, organized, professional condition, following all safety requirements for hazardous materials., • Keep all tools, power equipment, and other tools of the trade in a clean and safe working condition., • Ensure all documentation for LOTO, Confined Space, Hot Work and other related safety documents are completed before performing any work ., • Maintain effective and positive communication with production staff., • Keep supervisors and management aware of pending issues and status of installation or repair., • Coordinate preventative maintenance tasks on key plant equipment and ensure completion of those tasks., • Strive to meet safety targets or objectives set by the supervisor or management. Experience and Skills Requirements • A minimum of 5 years performing mechanical duties in a manufacturing or similar environment., • Highly experienced background installing/repairing air pumps, PD Pumps, pneumatic valves, gearboxes., • Ability to install and wire 100 hp electric motors, limit switches, photoelectric sensors, VFD’s., • Exhibit a strong problem-solving aptitude when it comes to mechanical equipment., • Operate Forklift, Man Lift, Scissor Lift, or other similar equipment., • Order parts, check paperwork on receipt of parts., • Attend safety meetings, conduct safety audits., • Safely perform all other duties as required by supervisor on an as needed basis., • Computer skills., • Welding certifications plus strong pipe fitting and electrical skills., • Able to read technical documents., • Experience with preventative maintenance programs., • Background working with asphalt related products or equipment., • Advanced education or training in engineering, mechanics or technical related fields., • Understanding of boiler and or hot oil systems., • Maintain effective and positive communication utilizing reading, writing, and documentation creation in English for manufacturing staff, Computerized Maintenance Management System (CMMS), and outside/inside support services. Working Conditions • Must have 20/20 or corrected 20/20 vision., • Strong communication skills., • Employee must have full range of motion to stand, walk, sit, reach, climb, stoop or kneel., • Employee must be able to stand for extended periods., • Employee must be able to complete repetitive strenuous work under varying climate conditions., • Employee must be able to safely lift up to 70 Lbs., • Must be able to work at heights in excess of 40 feet without concern., • Must be able to work in a plant environment with varying levels of temperature and physical requirements. ICP Group is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, or religion or other legally protected status. Powered by JazzHR 0PJ4tpMPpQ

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Free uniforms, • Opportunity for advancement, • Training & development Do you enjoy making things using your hands? Have hobbies that involve color or 3-D art? Like finding ways to be creative in different areas? Becoming a Surface Experts Technician could pair your interests perfectly with your job! Take advantage of an artistic outlet as your work creatively to complete repairs, usually in an hour or less. A Day in the Life of a Surface Experts Technician: WE OFFER: • Base Salary + Bonus Opportunity: Performance-based commissions starting on day 1, • Great Work/Life Balance: No required overtime, no nights, no weekends, • Time Off: Paid holidays and accruable vacation, • Flexible Work Schedule: Can accommodate midweek appointments, • Paid New Hire Training: Onboarding includes learning alongside a trained technician, • Company Car: Each technician drives a branded company vehicle for job duties, • Tools Included: All necessary tools and products are provided, • Learn a New Trade: Develop skills in a brand-new emerging trade, • Supportive Work Environment: Team celebrates achievements and collaborates in their approach to problem-solving, • Small Business: Local business with an owner who works alongside the team each day, • Mentorship Opportunities: Ongoing repair training and career development, • Dedicated Help Lines: Technician Support Team on call to assist to questionsDUTIES: In the Field Daily • Complete 4 or more creative repairs on-site each day, • Perform work on-location while displaying good customer service and communication, • Problem-solve with repairs in a variety of settings like apartments, hotels, moving sites, construction sites, etc.Customer Service and Communication, • Treat tenants and staff with exceptional customer service, • Update progress on repairs by entering information and notes on our CRM/Dispatch tool, • Problem-solve alongside our designated Support Team for any issueFollow Repair Process, • Learn and integrate our one-of-a-kind 5-step process into your creative routine, • Master each instrument and tool in your personalized tool-kit, • Flex your artistic talents each repair requires a unique solutionCalling all artistic types! Technicians with backgrounds in painting, sculpting, whittling, drawing, and other visual arts of various mediums can excel at Surface Experts. Your talent with color is vital in matching colors and patterns for complex repairs. Every repair has a different design, sheen, and material, so creativity is a must. QUALIFICATIONS • Hands-on experience doing some form of manual work From construction and manufacturing, to painting or sculpting., • A background in facilities maintenance is helpful but not a deal breaker., • Must be able to see, distinguish, and replicate colors A familiarity with color and color matching is integral to our process.ABOUT SURFACE EXPERTS Surface Experts is a comprehensive hard surface repair company. We can fix minor damages to many surfaces including Bathtubs, Cabinets, Floors, Appliances, Countertops, Furniture, Elevator Panels you name it! • By combining traditional trades with our own original processes and products, we are able to provide long-lasting repairs that are pleasing to the eye. And all with a smile!, • Our competitors want to resurface everything even damage only a few inches wide! We can repair those small spots, resulting in happy customers who keep on calling us back. Our goal is happy customer who has saved money and time while avoiding adding another damaged surface to the landfill., • Our typical repair doesnt make a mess, doesnt leave a smell, and doesnt take more than 2 hours. Technicians usually need only a tablespoon or two of product, meaning they can carry everything with them in a small truck or car!VISION, • To establish and lead a nationally recognized market for surface repair as an alternative to replacement or complete refinishing., • Our goal is to be represented in every major metropolitan area, and for our brand to be synonymous with spot repair among all facilities and maintenance management.MISSION, • Our mission is to develop outstanding teams by investing in strong relationships., • Together, we work to solve our customers problems by reducing the waste of time, money, and materials that end up in landfills.VALUES, • Serve Others, • Put Relationships First, • No Jerks, • Be Humble, • Be a Problem Solver, • Be Curious, • Seek to Understand the Cause of the Problem, • Work Smart, • Constantly Improve, • Trust the Process, • Be Organized, • Be Teachable, • Put Business Needs Above Personal Wants

Job Description Location: Tampa, FL Company: PGT Innovations (Part of MITER Brands) Schedule: Monday through Friday, starting at 7:30 a.m. Compensation range is between $23.00 to $27.00 PGT is seeking a skilled and customer-focused Window and Door Service Technician III to join our team in Tampa, FL. In this role, you’ll represent PGT professionally while diagnosing and resolving product issues, supporting large-scale projects, and mentoring new technicians. If you’re experienced, safety-conscious, and passionate about delivering excellent service, we’d love to hear from you. Responsibilities: • Serve as a product expert and key contact on large or complex service projects., • Communicate professionally with customers and coworkers, both on-site and via phone., • Diagnose product issues and implement effective repair solutions., • Schedule service appointments and order necessary parts., • Perform complex repairs independently and safely using hand and power tools., • Train and mentor lower-level Field Service Technicians., • Provide feedback to leadership on technician performance and product issues., • Determine warranty vs. installation issues and communicate with distributors as needed., • Maintain accurate documentation of service calls and submit reports promptly., • Ensure job sites are left clean and restored to original condition., • Maintain inventory and cleanliness of service vehicle and warehouse supplies., • Support Team Leader with inspections and coordination when needed. Required: • High school diploma or GED., • 3–5 years of experience in window and door manufacturing or repair., • Strong knowledge of PGT products and warranties., • Clean driving record per PGT’s safe driving policy., • Ability to work independently and in a team setting., • Proficiency with Microsoft Outlook, Word, Excel, and Windows., • Familiarity with iPads and mobile devices for documentation and scheduling., • Excellent communication and conflict resolution skills., • Valid Class D driver’s license., • 2–3 years of PGT-specific service experience., • Bilingual in English and Spanish (especially in areas with high Spanish-speaking populations). Benefits: Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents. We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life. Below is a list of benefits you will enjoy while working with our company. • Three comprehensive Medical plan options, • Prescription, • Dental, • Vision, • Company Paid Life Insurance, • Voluntary Life Insurance, • Supplemental Hospital Indemnity, Critical Illness, and Accident Insurance, • Company-paid Short-Term Disability, • Company-paid Long-Term Disability, • Paid time off (PTO), including Vacation, Personal, and paid Holidays, • 401k retirement plan with company match, • Employee Assistance Program, • Teladoc, • Legal Insurance, • Identity Theft Protection, • Pet Insurance, • Team Member Discount Program, • Tuition Reimbursement

Job DescriptionJob Title: Field TechnicianJob Description We are seeking a Field Technician to install CO2 monitors at various commercial sites, including restaurants and gas stations. This role involves light low voltage work akin to installing a fire alarm system. The installations are straightforward and involve using CAT 5 cabling. You will not be working in residential areas, and you must have your own tools. Responsibilities • Travel to customer sites to install CO2 monitors., • Install monitors directly to systems using CAT 5 cabling., • Document installation details and locations for daily reporting., • Communicate politely and effectively with current customers.Essential Skills, • Experience with installation and cable install., • Proficiency with hand tools and a mechanically inclined mindset., • Ability to work independently and demonstrate honesty in all tasks.Additional Skills & Qualifications, • Previous experience with low voltage or light electrical work is advantageous., • Experience in facilities maintenance, carpentry, or as a handyman is beneficial., • Driving experience is helpful due to the travel requirements of the role. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Dec 30, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionWe are currently seeking a Highly Qualified Maintenance Technician. The ideal candidate will bring a strong background in fabrication and technical problem-solving, with the ability to troubleshoot and repair equipment safely and quickly. The Maintenance Technician will perform tasks within the building and yard. Responsibilities & Requirements: • Proven experience in fabrication, • Proven experience in welding, • Ability to read and interpret schematics/blueprints, • Experience with PLC systems and/or CNC machinery, • Skilled in welding techniques, • Solid electrical knowledge, including understanding of voltage, • Practical experience with hand tools and control panels, • Strong mechanical aptitude and troubleshooting skills, • Ability to perform preventative and routine maintenance of heavy machinery and equipment, • A motivated individual who thrives in a hands-on environment, • Ability to troubleshoot, problem solve and repair, • Ensure compliance with safety standards during all maintenance activities, • Must have hands-on experience in managing, configuring, and troubleshooting network controllers., • Experience with inspecting, performing preventative maintenance and repairing conveyor belts in a manufacturing setting., • Perform routine and emergency maintenance on motors, gearboxes, and other mechanical systems, • Previous experience with lockout/tagout procedures to ensure safe maintenance practices, • Maintain accurate records of repairs, inspections, and parts usage, • Collaborate with operations and safety teams to identify and resolve equipment issues, • Respond promptly to maintenance requests and prioritize tasks effectively, • Knowledge of mechanical hydraulic and pneumatic maintenance and repair of machinery and equipment Physical Requirements: • Ability to lift 80 pounds periodically throughout the day, • Ability to work 12 hour shifts, • Monday- Friday, • Night Shift: 6:00pm - 6:00am, • 12 Hour Shifts, • Health, • Dental, • Vision

Job Description Chromalloy is a global engineering & solutions company. We are a leadings provider of aftermarket parts, repairs, and solutions that safely & reliably extend the life of aircraft engines and gas turbines. We develop, manufacture and repair critical turbine components for a range of engine platforms. Our solutions support the engines running the aerospace, energy and defense industries around the world. Video: What We Do Why work at Chromalloy? Chromalloy employees are proud, passionate problem-solvers who strive to live our values every day. A career with Chromalloy is an opportunity to learn from top industry experts, work with important technologies, and unlock a passion for innovation. Join our team of experts, innovators and problem-solvers delivering world-class solutions for our customers. As a global company, we are committed to creating an inclusive environment where all employees feel represented, heard, and able to bring their best selves to work every day. Be part of something bigger with Chromalloy! Our Total Rewards Program is designed to support you today and in the future. • Comprehensive and flexible benefit options starting on day one, including medical, dental, vision, EAP, wellness incentives, and 401(k) with employer matching., • Development & progression opportunities for every employee – regular performance conversations, training and development curriculum, and engineering fellowship programs., • Paid time off, including vacation, sick time, paid holidays, floating holidays, and parental leave—all eligible on your first day of employment! The Electronic Technician will be required to interface and communicate with co-workers, equipment operators, engineers, and operations supervisors to complete their tasks. Some overtime and weekend hours will be required on occasion to meet production and project schedules. An on-call rotating schedule may also be implemented for weekend and overnight coverage as needed. Limited travel may be required in support of training program and new equipment purchases and installations. This role is responsible for diagnosing and repairing electronic components and systems within the production facilities. DUTIES AND RESPONSIBILITIES: • The Electronic Technician is required to report promptly to their supervisor if any dangerous or potentially dangerous situations or conditions arise., • Diagnosing and repairing problems with electronic controls and associated systems relative to industrial equipment operations. This includes Motor Controls, Programmable Controls, CNC Controls, Relay Logic, Power Supplies and other various controls and assemblies., • Design and development of circuits and assemblies to assist in troubleshooting and to repair or improve reliability, service ability and capability of production equipment., • Accountability for the documentation of test results, method of repair and maintenance history., • Collaborating with vendor service representatives to resolve system design deficiencies., • Performing calibrations on electronic/electrical devices per supervisory instruction as part of the plants existing calibration control program., • Install equipment to manufacturer specifications and test for proper performance., • Maintain equipment and keep records of maintenance., • Troubleshoot and repair pneumatic, hydraulic, electrical, and power transmission systems using multimeters, pressure/vacuum/flow gauges, and temperature /humidity recording gauges to known historical standards to insure proper performance., • Interface with other departments and advise of maintenance procedures or equipment malfunctions, which would affect that department's operations., • Assist in general electrical maintenance of production and facilities equipment., • Support the development of preventative maintenance schedules and procedures for electrical systems., • Assist in the general mechanical maintenance of production and facility equipment., • Assist in the general production for processing of customer parts when necessary. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: • High school diploma or general education degree (GED)., • 3 to 5 years’ prior employment in a maintenance / electronics field, preferably in a manufacturing environment., • Additional Education, Training, Certifications, or Licenses that are applicable will be considered and may be used to supersede either of the other two requirements. LANGUAGE SKILLS: • Must be able to read, write, and communicate in English., • Read and interpret documents such as safety rules, operating instructions, and procedure manuals., • Write routine reports and correspondence either in digital or handwritten formats., • Communicate effectively with supervisor, engineers, and co-workers. MATHEMATICAL SKILLS and SCIENTIFIC PRINCIPLES: • Required to perform basic mathematical functions with decimals, fractions, or percentages., • Convert numbers from scientific notation to decimal form., • Convert units of measurement between English and Metric systems., • Basic understanding of common scientific principles like energy, fluid dynamics, and thermodynamics. OTHER SKILLS AND ABILITIES: • Comfortable working with equipment operating with low Voltage (50V–1000V) and Medium Voltage (1kV–100 kV)., • Proficiently reads and interprets electronic drawings and schematics., • Experience and understanding of calibration processes., • Mechanically inclined individual that thrives in a hands-on, demanding environment with little direct supervision once assignments are handed out., • PLC experience, knowledge, and training in following ladder logic to identify cause of faults., • Troubleshooting VFDs and associated equipment., • Robotic system programming, troubleshooting, and repairs., • Programming and setting up SCADA systems is a highly sought skill., • Troubleshooting industrial networking systems like TCP/IP is highly sought., • Open and accepting to changes in work scope and/or priorities as dictated by the environment., • May be required to operate forklift (training provided). PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Climb stairs multiple times during a shift, • Work from ladders or lifts on the shop floor., • Possess the manual dexterity to build or assemble small components with hand / pneumatic tools., • Some repetitive motions are required to perform these tasks (i.e., turning a wrench, cutting wire)., • Lift floor to waist level – 35 lbs., • Lift waist to shoulder level – 35 lbs., • Carry on shop floor – 35 lbs., • Some job functions will require wearing a SAR (Supplied-Air Respirator) while performing some tasks., • Some job functions may require entering of a permitted confined space. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. • The employee is regularly exposed to sources of electrical energy, extreme heat, sharp objects, and moving mechanical parts. Propper and functioning PPE, Machine guarding, and interlocking are designed into the process for employee protection, but employee awareness to hazards and controls is essential to maintaining a safe work environment for you and your co-workers., • Some tasks may introduce additional hazards associated with respiratory and skin irritants, asphyxiation, fall hazards, and electrical hazards including electrical shock or arc flash. Where applicable, employees will be provided adequate training, PPE, and procedures to protect against these hazards., • Generally, the work environment is maintained at a controlled temperature and humidity for comfortable working conditions, however, some tasks are performed in isolated areas where wet or humid conditions may exist., • The noise level in the work environment is usually moderate, but if performing work in areas deemed high noise areas, hearing protection will be supplied and required while in the designated area., • The EB-PVD Coater is a source of ionizing radiation. The machine design incorporates shielding to contain radiation so that exposure to employees in normal operating conditions is below background levels. To mitigate risk from accidental releases, employees may be required to wear a radiation monitor (dosimeter) while present on the coater platform. Radiation awareness training will be required of all employees that may work on the platform., • Standard shop floor PPE requirements will be enforced as well. As a minimum this includes eye protection and steel-toed shoes. Other requirements may be added by EHS based on hazard surveys and potential in isolated areas. #zr Due to government regulation only US persons (U.S. citizen, U.S. naturalized citizen, U.S. permanent resident, holder of U.S. approved political asylee or refugee status) may be considered for this role. Chromalloy participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Any offer of employment will also be conditioned upon the successful completion of a background investigation and drug screen in accordance with company policy and applicable federal and state regulations. Chromalloy is an equal opportunity employer - vets/disabled. In the United States, if you need a reasonable accommodation for the online application process due to a disability, please contact:

Job Description Company Description Florida Nutrition Inc., a small contract manufacturer in Tampa, FL, specializes in crafting high-quality liquid supplements, including vitamins and herbal extractions. We prioritize employee well-being and unwavering product quality. Job Description As a Quality Control Technician, you will play a pivotal role in upholding the quality and safety of our liquid supplement products. Your primary responsibilities will include inspecting, testing, and documenting product quality throughout the manufacturing process. You'll work closely with the production team to identify and resolve any quality issues, ensuring that our products meet the highest industry standards. Compensation based on experience, $18-21 per hour. Responsibilities • Perform routine quality control checks during the manufacturing process to maintain product integrity., • Inspect and test raw materials, in-process materials, and finished products for quality and compliance with established standards., • Record and report any non-conformance or deviations from quality specifications., • Collaborate with the production team to address and resolve quality concerns, ensuring product consistency and safety., • Assist in developing and revising quality control procedures and documentation., • Participate in the investigation of product complaints and discrepancies., • Maintain accurate and detailed records of quality control activities and results., • Contribute to a culture of quality and continuous improvement within the organization., • Comply with all relevant quality and safety regulations and standards, including cGMPs., • Perform additional related tasks as necessary. Work Schedule & Hours • Standard work hours include Monday to Friday from 8am-5:00pm, with ability to work overtime based on need Qualifications • High school education or equivalent., • Bilingual in Spanish and English preferred., • Proven experience in quality control or quality assurance within a manufacturing environment., • Background in supplements or pharmaceuticals preferred., • Strong attention to detail and a commitment to maintaining product quality., • Effective communication and teamwork skills to collaborate with cross-functional teams., • Familiarity with cGMP standards and quality control procedures., • Knowledge of relevant laboratory equipment and testing methods., • Ability to perform basic math and record-keeping accurately., • Strong problem-solving skills and a proactive approach to quality improvement.

Job Description Job Overview As an Engineering Technician, you'll play a key role in supporting R&D projects and collaborating with cross-functional portfolio teams. You'll be involved in the end-to-end development of hardware prototypes, contributing to the design and assembly of PCB, mechanical components, and software scripts. Your work will include conducting tests and experiments that drive development toward manufacturing readiness, while maintaining thorough documentation and process records to track test data and results. This is a dynamic, fast-paced environment where collaboration is at the heart of everything we do. You'll have opportunities to explore a variety of projects and engage with a talented team of engineers to share knowledge and expertise. Essential Functions • Solder PCBs with Surface-Mounted Components (SMCs), • Solder wire harnesses and making cables based on minimal documentation, • Modify circuit boards using wire jumpers and PCB trace modifications, • Assist in the construction of testing platforms and event setups, • Review and interpret PCB layouts for accurate implementation, • Help design and model components using CAD software, including SolidWorks, for engineering applications., • Print 3D models and prototypes to support design validation and engineering development., • Collaborate in the fabrication process, ensuring quality control and precision in part creation., • Solder wire harnesses and making cables based on minimal documentation, • Assist in diagnosing and resolving technical challenges, contributing to project success., • Contribute to the design, assembly, and testing of UAV frames for advanced projects., • Implement and uphold 5S methodology to streamline workflows and develop efficient lean processes., • Meticulously document testing procedures and data to ensure accuracy and support repeatability in future projects., • Assist in diagnosing and resolving technical challenges, contributing to project success., • Provide support in the development and management of project timelines under the guidance of the lead engineer or program manager., • Carry out additional duties as assigned, contributing to the overall success of engineering and project goals., • Collaborate with Manufacturing team to help push products to delivery, • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices., • Knowledge of Electrical SMT and Software, • Knowledge of circuits, • Ability to understand schematics, assembly drawings, and PCB layout, • Ability to understand cable drawings, • Solid knowledge of Electrical and Aircraft Systems, • Associate degree in engineering or technical field preferred, • Preferred Certifications:, • J-STD-001, • 3-5 years of experience as an engineering technician or other relevant technical field, • Equivalent documented work experience in lieu of degree may be acceptable, • Experience with:, • CAD software, • 3D printing, • Altium PCB layout software, • Cable wiring for RC planes, • Understanding Gas engines, • Understanding electrical motors, • Solid Works The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to stand for extended periods of time Frequently required repetitive movements of wrists, hands, and/or fingers For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a TS/SCI DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Job Overview As an Engineering Technician, you'll play a key role in supporting R&D projects and collaborating with cross-functional portfolio teams. You'll be involved in the end-to-end development of hardware prototypes, contributing to the design and assembly of PCB, mechanical components, and software scripts. Your work will include conducting tests and experiments that drive development toward manufacturing readiness, while maintaining thorough documentation and process records to track test data and results. This is a dynamic, fast-paced environment where collaboration is at the heart of everything we do. You'll have opportunities to explore a variety of projects and engage with a talented team of engineers to share knowledge and expertise. Essential Functions • Help Design and model components using CAD software, including SolidWorks, for engineering applications., • Print 3D models and prototypes to support design validation and engineering development., • Repairing 3D printers to ensure efficient printing and proper Software/ Firmware updates, • Operate CNC milling machines to fabricate precision parts for various engineering projects., • Collaborate in the fabrication process, ensuring quality control and precision in part creation., • Soldering wire harnesses and making cables based on minimal documentation, • Assist in diagnosing and resolving technical challenges, contributing to project success., • Contribute to the design, assembly, and testing of UAV frames for advanced projects., • Implement and uphold 5S methodology to streamline workflows and develop efficient lean processes., • Meticulously document testing procedures and data to ensure accuracy and support repeatability in future projects., • Work closely with cross-functional teams to facilitate the testing, completion, and optimization of components., • Assist in building and setting up platforms for both testing and event execution, ensuring functionality and safety., • Provide support in the development and management of project timelines under the guidance of the lead engineer or program manager., • Carry out additional duties as assigned, contributing to the overall success of engineering and project goals., • Collaborate with Manufacturing team to help push products to delivery, • Regular and reliable attendance on a full time basis [or in accordance with posted schedule]., • Responsible for exhibiting professional behavior with both internal and external business associates that reflects positively on the company and is consistent with the company's policies and practices. Understanding and Knowledge in: • Electrical and Aircraft Systems, • Power and mechanical systems, • UAV and CUAV, • Electrical equipment (O-Scopes, DMM), • Gas engines, • Electrical motors, • Bamboo studios 3D print software, • Solid Works, • Proficient in Microsoft office (Excel, Word, Power point, ect.), • Ability to efficiently collaborate with others, • Ability to obtain new skills quickly, • 2-4 years of experience as an engineering technician or other relevant technical field, • Equivalent documented work experience in lieu of degree may be acceptable, • Experience with CAD software and 3D printing The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties the employee is: Frequently required to stand for extended periods of time Frequently required repetitive movements of wrists, hands, and/or fingers For the purpose of this summary, occasionally is used to represent up to 1/3 of the time given to the work day, frequently represents 1/3 to 2/3 of the time and constantly represents 2/3 or more of the time. Security Clearance • Ability to obtain/maintain a TS/SCI DoD clearance, U.S. Citizenship required. About AEVEX AEVEX, headquartered in Solana Beach, California, supports the U.S. national security mission and partner nation needs around the world by providing full-spectrum aviation, remote sensing, and analysis solutions. The company's capabilities include custom design and engineering; rapid prototyping; sensor integration and sustainment; aircraft modification and certification; flight test instrumentation and support; mission operations service; advanced intelligence data processing, exploitation, and dissemination solutions; and tailored hardware and software mission-system tools. AEVEX uses agile and customized approaches to rapidly define, develop, and deliver specialized solutions for airborne special mission needs for the U.S. Government, partner nations, and commercial businesses. AEVEX has major offices in California, Florida, North Carolina, Ohio, and Virginia. AEVEX provides a full suite of comprehensive benefits, including a 401(k)-retirement plan, comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company, professional development funds, and an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support, among other benefits. Equal Employment Opportunity: AEVEX is an Equal Opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, religious creed, color, sex (including pregnancy, breast feeding and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship status, military and veteran status, marital status, age, protected medical condition, genetic information, physical disability, mental disability, or any other protected status in accordance with all applicable federal, state and local laws.

Job Description Mechanical Assembly Technician Location: Tampa, FL 33605 Schedule & Compensation • Hours: Full-Time, on-site in Tampa, FL 33605, • Work Hours: 7:30 AM – 5:00 PM What You’ll Do • Assemble aluminum extrusion structures exactly to engineering drawings and specifications, • Construct and bench-test pneumatic valve manifolds and harnesses to verify proper operation, • Perform quality inspections on completed assemblies, checking measurements and adherence to standards, • Receive, inspect, and inventory incoming components; track usage and maintain accurate records, • Proven experience working with aluminum extrusion systems (this role is not entry-level), • Ability to read and interpret mechanical drawings and technical schematics, • Familiarity with pneumatic valve manifolds and harness assemblies (strongly preferred), • Skilled in using hand tools, power tools, and precision measuring equipment, • Detail-oriented with strong problem-solving abilities, • High school diploma or equivalent; technical or vocational training is a plus, • 1–3 years of mechanical assembly or manufacturing experienceCompany DescriptionWe are a staffing company dedicated to connecting you with long-term career opportunities.We are a staffing company dedicated to connecting you with long-term career opportunities.

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Company parties, • Free food & snacks, • Free uniforms, • Opportunity for advancement A Day in the Life of a Surface Experts Technician: WE OFFER: • Base Salary + Bonus Opportunity: Performance-based commissions starting on day 1, • Great Work/Life Balance: No required overtime, no nights, no weekends, • Time Off: Paid holidays and accruable vacation, • Flexible Work Schedule: Can accommodate midweek appointments, • Paid New Hire Training: Onboarding includes learning alongside a trained technician, • Company Car: Each technician drives a branded company vehicle for job duties, • Tools Included: All necessary tools and products are provided, • Learn a New Trade: Develop skills in a brand-new emerging trade, • Supportive Work Environment: Team celebrates achievements and collaborates in their approach to problem-solving, • Small Business: Local business with an owner who works alongside the team each day, • Mentorship Opportunities: Ongoing repair training and career development, • Dedicated Help Lines: Technician Support Team on call to assist to questionsDUTIES: In the Field Daily • Visit 4+ jobsites every day, • Repair damage on the job site while using exceptional customer service to follow up with staff, • Employ your creativity in several settings such as apartments, hotels, commercial buildings, and building sitesCustomer Service and Communication, • Use outstanding customer service to engage with staff and tenants, • Keep progress up to date with notes and updates in our CRM/Dispatch tool, • Reach out to our Support Team on any issue or questionFollow Repair Process, • Develop an understanding of our own 5-step repair process and use it in the field, • Master each part of your custom-made tool-kit, • Think outside the box to create one-of-a-kind repairsWe are in search of someone with experience in painting. This could be interior or exterior painting, or even painting in a visual art sense. Your knowledge of color and paint application will assist in the color matching portion of the repair process. QUALIFICATIONS • Practical experience with a hands-on trade Example include any part the construction, manufacturing, or painting process. Personal hobbies could work too!, • Maintenance experience is beneficial but not mandatory., • Color is a fundamental part of our work, and the ability to understand and manipulate color is crucial for success.ABOUT SURFACE EXPERTS Surface Experts does it all: Floors, Countertops, Bathtubs, Cabinets, Appliances, Furniture, Elevator Panels Almost Everything! We aim to be the one place fixes all for any kind of small surface damage. • Traditional skills meet modern solutions: We deliver high-quality, long-lasting repairs with a smile., • While many of our repairs are relatively small and straightforward, our competitors always want to completely resurface. Our repairs are often smaller than a dinner plate. This superior alternatives results in satisfied customers and long-term relationships. Our process minimizes materials in landfills while helping our customers save time and money!, • Our repair process needs minimal product usually just 1 to 2 tablespoons allowing our technicians to take everything they need with them in a small vehicle. Our method ensures a clean and smell-free experience, complete in less than two hours.VISION, • To establish and lead a nationally recognized market for surface repair as an alternative to replacement or complete refinishing., • Our goal is to be represented in every major metropolitan area, and for our brand to be synonymous with spot repair among all facilities and maintenance management.MISSION, • Our mission is to develop outstanding teams by investing in strong relationships., • Together, we work to solve our customers problems by reducing the waste of time, money, and materials that end up in landfills.VALUES, • Serve Others, • Put Relationships First, • No Jerks, • Be Humble, • Be a Problem Solver, • Be Curious, • Seek to Understand the Cause of the Problem, • Work Smart, • Constantly Improve, • Trust the Process, • Be Organized, • Be Teachable, • Put Business Needs Above Personal Wants

Job DescriptionEssential functions include using hand tools and operating production equipment to manufacture medical devices and ancillary products. Following drawings, guidelines, and/or diagrams to ensure product specifications and tolerance levels are met and performing other miscellaneous tasks as assigned. This position requires excellent hand-eye coordination, manual dexterity, and measuring in both English and Metric units. Educational requirements are a High School Diploma, General Equivalency Diploma (GED), or High School Equivalency Diploma (HSED). The Florida Ready to Work credential is desired and the Certified Production Technician (CPT) credential is preferred. An OSHA 10 certificate of completion is a plus. Candidates must be able to read, write, and speak English, preferably lift 50 pounds, and have visual acuity to perform the essential functions. 1-3 years of manufacturing experience is required (preferably in medical device manufacturing) however entry-level candidates with a Certified Production (CPT) credential will be considered. All candidates must pass a drug screen and background check. This is a 3-4 month part-time temporary assignment, 40 hours per week.

Job Description We are seeking a skilled and dedicated Maintenance Technician to join our team. The ideal candidate will possess a strong mechanical background and be proficient in facilities maintenance. This role involves ensuring that all equipment and systems are operating efficiently, performing repairs, and maintaining a safe working environment. The Maintenance Technician will be responsible for troubleshooting issues, conducting routine inspections, and providing excellent customer service to internal teams. Pay: $18.00-$21.00 hourly depending on experience Hours: 5:00 am - 1:30 pm with over time Responsibilities • Maintaining all machinery to ensure it's at working standards, • Manage outside vendors for execution of maintenance work., • Documenting progress reports and maintenance logs., • Overseeing equipment stock and placing orders for new supplies when necessary., • Perform electrical and mechanical troubleshooting and repair as necessary., • Reinforcing machinery safety, safety training and LOTO procedures., • Maintain conveyor systems, automated packing system& Robotics, • Complete additional assignments as directed by the Supervisor., • Advanced motor controls experience as well as pneumatic, hydraulic, industrial and plumbing knowledge Requirements • At least 6 months of electrical experience, • Strong mechanical knowledge with hands-on experience in facilities maintenance., • Ability to read and understand wiring Schematics, Pneumatics and Hydraulics, • Excellent English communication skills for effective interaction with team members and management., • Previous experience in a maintenance role is preferred but not required., • Strong problem-solving skills with the ability to work independently or as part of a team., • Manufacturing experience; strong hydraulic, pneumatic, mechanical and industrial skills with some PLC experience and HVAC., • Basic knowledge of Microsoft Excel Join our team as a Maintenance Technician where your skills will contribute significantly to our operational success! Company DescriptionWe work hand in hand with our clients to fill positions quickly and hire employees efficiently. Our respectful approach to staffing offers an advantage above others. You won't be treated as a number, but as a prospective employee looking for a career.We work hand in hand with our clients to fill positions quickly and hire employees efficiently. Our respectful approach to staffing offers an advantage above others. You won't be treated as a number, but as a prospective employee looking for a career.

Job DescriptionSEEKING INDUSTRIAL ELECTRICAL TECHNICIAN - ALL SHIFTS AVAILABLE APPLY NOW!! Job Description: Join a dynamic team as an Industrial Electrical Technician where you will play a crucial role in maintaining and ensuring the smooth operation of industrial electrical, mechanical, hydraulic, and pneumatic systems in a high-production manufacturing environment. Responsibilities: • Repair, rebuild, and replace components on industrial electrical, mechanical, hydraulic, and pneumatic systems used in production., • Perform preventive and predictive maintenance tasks to reduce downtime and maintain equipment integrity., • Respond to equipment breakdowns and support shift teams with timely troubleshooting in a fast-paced manufacturing environment., • Ensure all electrical work complies with safety standards and company policies., • Collaborate closely with maintenance technicians, machine operators, and supervisors to support production efficiency., • Document maintenance work performed and assist with continuous improvement initiatives., • Proficiency in electrical and mechanical systems., • Experience with PLC troubleshooting and electrical schematics., • Ability to perform electrical maintenance, troubleshooting, repairs, and installations on plant equipment., • Experience in a high-production manufacturing environment. EMAIL; SVILLEGAS@AEROTEK .COM Job Type & Location This is a Contract to Hire position based out of Tampa, FL. Pay and Benefits The pay range for this position is $28.00 - $32.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tampa,FL. Application Deadline This position is anticipated to close on Dec 31, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.