Trabajos manufacturing technician en San Diego, CaliforniaCrear alertas

Job Description Agile IT Synergy, LLC is a Subject Matter Expert (SME) based information technology company focused on innovative engineering and integration of relevant technologies combined with effective business practices to deliver complete solutions that meets customer mission needs. Our proven ability to deliver against mission priorities ranging from organizational process improvements to the execution of mission-critical technical solutions is why we are trusted by critical government agencies. We're in search of customer focused individuals with a passion for solving difficult problems and exceeding expectations. Position Location: Coronado or San Diego, CA Job Description and Responsibilities: The Engineering Technician IV will ensure that our government customer achieves the desired infrastructure, capabilities, and processes for the deployment of systems and services at the speed of relevance. The Engineering Technician IV performing on this contract will possess the required skills, experience and credentials at the appropriate clearance level and be responsible for executing collaborative logistics integration and interoperability to enhance command and control, communications, and readiness for our customer. Duties include but not limited to: • Provide technician support during test and demonstration planning., • Develop and test solutions to solve technical problems in research and development, manufacturing, inspection, and maintenance, • Assist engineers in inspecting products, conducting tests, and collecting data, • Follow published user manuals and maintenance documentation., • Support Engineering teams by reading, editing, and creating electrical drawings and system schematics., • Provide test event support including resource identification, planning, delivery, site setup, site daily operation, and retrograde., • Arrange for material handling equipment for off-loading, loading, and movement of test and training equipment., • Set up and operate test equipment power generation and distribution, and environmental control equipment. Education: • High school diploma or passing score on the General Education Development (GED) exam AND five (5) years of full-time professional experience working as an Engineering Technician in providing technical support related to the design, development, production, or testing directly in support of the Department of Defense., • Four (4) years full-time hands-on experience in installation, troubleshooting, repairing, and/or testing of any major military system., • Relevant experience and years of service may be considered in lieu of required education Required Experience: • Secret Clearance, • Past performance in supporting DoD related logistics activities and/or field support, • Ability to work as a member of a team with the skills and personality to lead discussions that results in positive desired outcomes, • Candidates must possess excellent interpersonal and customer service skills, • Conducting basic networking and emplacement of military systems upon receiving proper training manuals, • Experience in developing and testing solutions to solve technical problems in research and development, manufacturing, inspection, and maintenance; while assisting engineers in inspecting products, conducting tests, and collecting data. Preferred Experience: • Experience with following published user manuals and maintenance documentation. In addition, experience reading, editing, and creating electrical drawings and system schematics., • Experience working at military facility locations or field bases. Travel: Up to 20% based on customer needs AIT Synergy has a competitive benefits and compensation package that includes Medical/Dental coverage, 401(k), Paid Time Off, Holidays, and opportunities for tuition reimbursement and training compensation relevant to task duties.

Job Description JOB DESCRIPTION Onsite; M-F; 5am - 1:30pm,12:30pm - 9pm In-person interivews The Packaging Technician II is responsible for independently performing packaging, bottling, labeling, and material handling operations in accordance with established procedures, quality standards, and regulatory requirements. This role serves as an experienced technician within the packaging function, supporting production goals through advanced equipment operation, troubleshooting, training, and process improvement activities. Packaging Technician II ensures the accurate completion of production documentation, maintains compliance with Good Manufacturing Practices (GMP), and serves as a technical resource to team members. Success in this position requires strong attention to detail, problem-solving skills, and the ability to work effectively in a fast-paced, team-oriented manufacturing environment with minimal supervision. Job Responsibilities: (Primary Duties, Roles, and/or Authorities) · Perform routine and advanced packaging operations in accordance with approved procedures, work instructions, and production schedules. · Operate packaging equipment, including pipettes, scales, labeling systems, printers, and other production tools. · Perform in-process inspections to verify product identity, labeling accuracy, package integrity, and documentation completeness. · Support label creation, printing, reconciliation, and packaging documentation activities. · Manage packaging materials and supplies, including receiving, staging, inventory control, and disposition activities. · Conduct line clearances, equipment setup, product changeovers, cleaning, and routine equipment maintenance activities. · Troubleshoot basic packaging process, equipment, and material issues, escalating complex issues as appropriate. · Maintain accurate production data within SAP and other manufacturing systems. · Complete batch records, production documentation, and system transactions accurately and in compliance with GMP requirements. · Monitor inventory levels and communicate material shortages or potential supply constraints. · Train and provide day-to-day guidance to Packaging Technician I employees and new team members. · Perform advanced equipment troubleshooting and adjustments. · Support investigations related to deviations, nonconformances, and quality events. · Assist with implementation of process improvements to enhance safety, quality, delivery, and operational efficiency. · Support qualification, validation, and implementation activities for new packaging processes, materials, and equipment. · Collaborate with Manufacturing, Quality, Planning, Engineering, and Warehouse teams to support operational objectives. · Review packaging documentation for completeness and accuracy prior to submission. · Demonstrate proficiency across multiple packaging processes and provide operational flexibility as needed. · Adhere to all GMP, ISO, FDA, Environmental Health & Safety (EH&S), and company quality system requirements. · Perform other duties as assigned. Education and Experience: · High school diploma, GED, or equivalent required. · Ability to effectively read, write, and communicate in English. · Basic computer proficiency, including data entry and use of common software applications. · Ability to perform basic mathematical calculations with accuracy. · Minimum 2 years of experience in manufacturing, packaging, laboratory, or related operational environment. · Demonstrated ability to follow written procedures, work instructions, and standard operating procedures (SOPs). · Strong attention to detail and ability to work effectively in a fast-paced, team-oriented environment Knowledge and Skills: · Strong organizational and time management skills, with the ability to effectively prioritize multiple tasks and deadlines. · Self-motivated and capable of working independently with minimal supervision while maintaining productivity and quality standards. · Effective written and verbal communication skills, with the ability to collaborate across teams and functions. · Demonstrated ability to quickly learn and apply new processes, technologies, and methodologies. · Strong attention to detail and commitment to accuracy, quality, and compliance. Physical Demands: (if applicable) · Ability to safely lift and transport materials weighing up to 30 pounds, utilizing appropriate ergonomic practices and seeking assistance when necessary. · Ability to perform repetitive manual production and packaging activities throughout the duration of the shift, including operation of manual and electronic pipettors, manual vial capping and torque verification, operation of automated torque equipment, application of product labels, assembly of final packaging configurations, and operation of bagging and packaging equipment. · Demonstrated dexterity and hand-eye coordination required to perform detailed packaging and assembly tasks with accuracy and consistency. · Ability to stand, walk, reach, and perform repetitive motions for extended periods while maintaining productivity and quality standards. Work Environment: (if applicable) The Packaging Technician works in a laboratory and production environment where reagents are filled, dispensed, labeled, and packaged into customer-facing products. Responsibilities are primarily performed at laboratory bench workstations and packaging equipment stations, requiring adherence to established quality, safety, and regulatory standards. The role involves the use of manual and electronic pipettors, labeling equipment, packaging machinery, and other production-related tools. Employees are required to wear appropriate personal protective equipment (PPE), including laboratory coats, gloves, and safety eyewear, and must comply with all Environmental Health & Safety (EH&S) requirements. The position requires the ability to perform repetitive tasks, maintain attention to detail, and work effectively in a fast-paced, team-oriented manufacturing environment while supporting production schedules and quality objectives \nCompany Description LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch. LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch.

Job Description Job Title: Manufacturing Packaging Operator Location: San Diego, CA Job Description: The Packaging Technician I is responsible for performing routine bottling, labeling, packaging, and material handling activities in accordance with established procedures, work instructions, and quality standards. This role ensures accurate completion of packaging documentation, including batch records, standard operating procedures (SOPs), work instructions, and material processing requests. The Packaging Technician I supports safe, efficient, and compliant operations while maintaining product quality and regulatory requirements. Success in this role requires strong attention to detail, the ability to follow standardized processes, and effective collaboration in a fast-paced, team-oriented manufacturing environment. Education and Experience: High school diploma or equivalent required. Ability to effectively read, write, and communicate in English. 2 years of experience in a manufacturing, packaging, laboratory, or related operational environment. Demonstrated ability to follow written procedures, work instructions, and standard operating procedures (SOPs). Strong attention to detail and ability to work effectively in a fast-paced, team-oriented environment \nCompany Description About Indotronix Indotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at: iic.com. About Indotronix\nIndotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at: iic.com.

Job Description While the Inside Wireman/Installer is installing the wire and Homerun feeders on a project, the Foreman will be inspecting their work and addressing any issues with the work directly with the Wireman/Installer. Typical work that the Wireman/Installer would be responsible for is installing the network of low voltage cabling that is used for video, voice and data, Fire Alarm or other low voltage signaling. While most installations are in buildings that are partially or fully enclosed to protect from sun, wind and rain; these installations are often installed before air conditioning, heat or permanent light fixtures have been installed in the buildings. Many jobs, however, are in existing buildings or offices; and some work may be outside under varying weather conditions. Backbone voice and data cables are routed between the entrance facility, where communications signals enter a building: to equipment rooms and telephone rooms. Voice and data horizontal cables are routed between telephone rooms or equipment rooms and individual workstations throughout the building. Equipment rooms often contain energized equipment such as hubs, file servers, electrical panels or telephone switches. In some cases these devices are configured and connected to equipment that currently serves the building and must not be interrupted as a result of work performed by unqualified workers or those only partially trained. Any question of how a system goes together or works must be immediately brought to the attention of the foreman. The Wireman/Installer installs voice, data, video and Fire Devices at the time of trim in their designated locations as identified on the approved plans/layouts. In addition, they install punch down blocks and cross connects in telephone rooms when required. These may be wall mounted or rack mounted, and must be grouped and identified according to specific installation standards. Whether the work is in new construction or in existing office or manufacturing space, the craftsman takes pride in the work he or she has and can performed. All testing required to insure the installation was done properly must be done to avoid return trips to do repairs or perform quality control work that should have already been completed. Job Description:Many of the work processes of the Installer Technician are listed below. There are many systems that utilize low voltage voice, data, video and Fire Devices. Not all Wireman/Installers work on all systems. However, properly trained Wireman/Installers can work on a variety of types of systems, including systems for voice, data, video and Fire Devices. • Plan and Initiate Projects at the apprentice level, • Install Underground voice, data, video and Fire Devices Feeders to Facilities, • Install Pathways, Hangers and Spaces for Installation of Low Voltage Wiring, • Install, Terminate and Test Wires and Cables, both Copper and Fiber-Optic, • Install, Test, Certify and Troubleshoot Local Area Network (LAN) Cabling Systems, • Lay Out, Install and Verify Operation of Security and Access Control Systems, • Install Communications and Sound Distribution Systems, • Provide Testing, Analysis and Repair of Video, Voice and Data Systems; including Electronic Devices, • Prefabricate Systems, such as Telecommunications Racks, for Field Installation, • Work on other Sub-systems such as Communications, Entertainment, Environmental, Fire Life Safety and Access Control., • Seal all penetrations through rated areas with approved Fire Stopping Methods. Responsible for the filling out of their own timesheet correctly and getting it into the payroll dept. by the required time and day.

Job DescriptionDescription: Location: San Diego, CA Department: Manufacturing Reports To: Chief Operating Officer Employment Type: Full-Time, Non-Exempt Hourly Rate: $36.00–$42.00 DOE Company Description CoreDux USA is a precision manufacturing company serving the aerospace, semiconductor, medical device, energy, and advanced technology industries. Our state-of-the-art manufacturing facility utilizes advanced CNC machining, EDM, metrology, and automation technologies to deliver world-class quality and performance. We are committed to innovation, continuous improvement, and manufacturing excellence while providing our customers with high-quality precision components. At this time, we are unable to sponsor applicants for employment authorization. All candidates must be legally authorized to work in the United States without current or future need for employer sponsorship. Position Summary The EDM Set-Up Technician / Operator is responsible for setting up, operating, troubleshooting, and maintaining Electrical Discharge Machining (EDM) equipment while producing precision components that meet customer quality, delivery, and productivity requirements. This position supports the implementation, daily operation, and long-term growth of CoreDux USA's EDM Manufacturing Department by ensuring safe, efficient, and repeatable manufacturing processes while supporting continuous improvement and manufacturing excellence. Essential Duties and Responsibilities • Set up and operate Wire EDM equipment according to manufacturing documentation, engineering drawings, and work instructions., • Verify machine setups and perform first-piece inspections prior to production., • Produce precision components that meet engineering drawings, GD&T requirements, customer specifications, and quality standards., • Monitor machining operations and make approved machine offsets to maintain dimensional compliance., • Perform first-piece, in-process, and final inspections using precision measuring equipment., • Read and interpret engineering drawings, GD&T, process documentation, and work instructions., • Replace wire, filters, dielectric fluid, and other EDM consumables as required., • Perform routine machine maintenance and daily equipment care., • Work with the Maintenance Department to support preventive maintenance activities and maximize machine uptime., • Assist with fixture setup, workholding, tooling improvements, and process optimization., • Support new job setups, prove-outs, and production readiness., • Support First Article Inspection (FAI), production validation, and customer quality requirements., • Assist with installation, startup, and qualification of new EDM equipment., • Assist in establishing standardized setup procedures, tooling methods, and manufacturing best practices to support the continued growth of the EDM Manufacturing Department., • Maintain a clean, safe, and organized work area., • Follow all company safety, quality, and manufacturing procedures., • Perform other duties as assigned. Required Qualifications • High school diploma or GED required., • Technical school, machining certificate, or apprenticeship preferred., • Minimum three (3) years of machining experience., • Minimum two (2) years of Wire EDM setup and operation experience preferred., • Ability to read and interpret engineering drawings, GD&T, and manufacturing documentation., • Experience using precision measuring equipment including micrometers, calipers, indicators, bore gauges, and height gauges., • Strong troubleshooting and root cause analysis skills., • Good mechanical aptitude and attention to detail., • Ability to work independently and within a team environment. Preferred Qualifications • Experience operating Makino, Mitsubishi, Sodick, Agie, Charmilles, or similar Wire EDM equipment., • Experience with EDM Hole Drilling equipment., • Experience with Sinker EDM equipment., • Experience machining aerospace, semiconductor, medical, or other high-precision components., • Experience working in an AS9100-certified manufacturing environment., • Knowledge of Lean Manufacturing, 5S, and continuous improvement principles. Physical Requirements • Ability to lift up to 50 pounds., • Ability to stand and walk for extended periods., • Ability to work safely around industrial machinery., • Ability to wear required personal protective equipment (PPE). Benefits • Competitive hourly compensation, • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k), • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Life Insurance, • Short-Term Disability, • Long-Term Disability, • Employee Assistance Program (EAP), • Paid Time Off (PTO), • Paid Holidays Equal Employment Opportunity CoreDux USA is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, protected veteran status, or any other characteristic protected by law Requirements:

Job Description Responsibilities: • This position IS NOT related to shipping OR shipment packaging., • This is a manufacturing type position and involves filling of liquid antibodies into small vials in a laboratory environment and using lab instruments such as pipettes, peristaltic pumps, and analytical balances., • A science and/or manufacturing background is required., • Learn and understand: Basic Packaging process flow, Basic Inventory and supplies management process flow, Basic bottling techniques for all single vial purified and conjugate materials, Basic packaging processes including bagging and labeling, Use of pipette, scale and other packaging equipment as required, Support label creation process by learning and operating all labeling equipment., • Meet daily/weekly/monthly departmental production objectives efficiently and effectively with a high degree of quality., • Must have ability to independently organize individual schedules to meet departmental goals., • Ability to follow general instructions on routine tasks and detailed instructions on new tasks., • Support departmental packaging supplies and material management function including storing, retrieving, and staging supplies/materials as required., • Support technical manual and technical data sheet preparation and operate associated equipment to produce printed literature., • Support daily shift start up meetings., • Understand and input packaging data, as required, in the SAP system and/or other Production Planning/Manufacturing Resource database system(s)., • Follow all department guidelines and procedures., • Follow Client Biosciences Environmental, Health and Safety (EH&S) policies and procedures., • Takes responsibility for safety in immediate work area., • Participates in EH&S programs., • Notifies supervisors of all observed hazardous conditions or unsafe work practices., • May provide recommendations on maintaining the safety of the work environment., • Other duties as assigned by Supervisor. Requirements: • Liquid Dispense/PKG Equipment Pipettes, peristaltic pumps, analytical balances, etc., • Math Skills: Ability to calculate fill volume based on concentration (mg/ml); understanding of the metric system., • The Packaging Department processes material in a laboratory environment/production area with lab bench work surfaces for filling/dispensing research reagents into customer facing vials using electronic and manual pipettors., • The packaging technician gathers the materials required for their order: liquid bulk reagent (antibody or buffer), vials/bottles, caps, paperwork, labels and prepares and organizes the starting materials accurately and then presents the production order setup for line clearance., • A trained associate (Line Clearance Technician) then verifies the accuracy of the materials and paperwork then signs-off on the paperwork to allow the Packaging, • Technician to proceed with the completion of the order., • Weekly schedules are provided to the Packaging Technicians, with daily priorities indicated. The priorities can change, and Packaging Coordinators will relay any change in assignment priority to the Packaging Technicians., • Packaging Technicians receive approximately 4-7 assignments per 8-hour shift., • The orders vary in quantity from 8 eaches to 1000-2000 each build sizes., • Orders over 500 eaches are assigned more than one technician to allow completion in a timely manner and allow the technicians to rotate the tasks for ergonomic safety., • The Packaging Technician is required to wear long pants or skirt that covers the leg entirely down to the ankle, no visible skin exposed., • Closed-toe and closed-heel shoes that cover the entire foot are required and no visible ankle/leg skin is allowed., • Attire is casual with no ripped or torn clothing and must be appropriate for the workplace., • The laboratory area requires a labcoat to be worn and gloves and goggles are required when performing benchwork that poses a spill or splash risk: bottling/filling, capping, transferring, measuring, etc., • Technicians may stand or sit at the bench to perform their assignments., • Most associates choose to stand to perform the filing, capping, labeling, and packaging activities., • Packaging Technicians often stand for large kit assembly events and at times manage items up to 20-30 pounds, requesting assistance when required for ergonomic safety., • Responsible for the manual inspection, labeling, and packaging of clinical and commercial products., • Perform finished product packaging as required to satisfy all customer, internal, clinical, and other demand., • Ensure finished product is packaged in accordance with procedures and Quality specifications., • Inspect in-process packaging, components to ensure consistent quality and remove defective products and packaging material., • Maintain timely and accurate documentation of manufacturing activities related to product packaging, including but not limited to device history records and inventory counts., • Perform simple mathematical calculations required to assist in completion of batch records., • Assist with inventory counting activities as required., • Participate in safety audits as required and actively engage in daily safety discussions/observations. Perform routine cleaning of packaging station and processing equipment., • Abide by all personal protective equipment and product contamination control (i.e. gowning) requirements., • Handle hazardous waste as appropriate. Qualifications: • High school diploma/GED., • A minimum of 6 months of industry work experience required., • Strong attention to detail., • Work well in a team environment., • Good documentation practices., • Must be willing and able to work a flexible work schedule including static or rotating shifts and overtime as required., • Familiarity with computers and various software for general business functionality., • Must be able to perform basic mathematical calculations.

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant solutions on time to customers? Are you seeking a role where you can take initiative? If so - we want to hear from you! Fuse is looking for a detail-oriented Material Coordinator to support the Materials, Production, Quality, and Program teams in driving excellence in material accountability and on-time, high-quality deliveries. This role will have primary responsibility for tracking, controlling, and maintaining accurate records for Government Property while also supporting day-to-day material handling, inventory, receiving, kitting, and production material needs. This role will be integral to Fuse’s ability to deliver products for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. Successful candidates will be nimble self-starters who are excited about Fuse’s technology and are able to analyze processes and suggest powerful new ideas. If you have Material Handling experience, Microsoft Office experience, the ability to learn quickly, multi-task, and work in a fast-paced environment, then contact us to get more information about this opportunity. Duties and Responsibilities: • Maintain the day-to-day schedule for production starts and completions, • Issue and track manufacturing orders for production, • Validate in process work matches electronic records, • Coordinate with Quality department on the collection and retention appropriate production records, • Assisting in coordinating with purchasing and receiving to validate material is on hand for planned manufacturing operations and to align schedule to planned receipt of parts, • Assist in the creation of purchase requisitions to cover projected material shortfalls, • Develop production schedule based on arrival of parts, technician availability, and company priorities, • Collaborate with cross-functional teams on the implementation of new Enterprise Resource Planning (ERP) software systems for production, quality and purchasing, • Assist in the inspection and correction of data in the inventory management system in support of ERP transition, • Perform receiving and material movement function including:, • Receives purchased and completed manufactured items, verify identification codes and quantities, • Inspecting incoming goods for compliance with Purchase Orders, • Make entries on inspection paperwork and in business system software, • Communicate results of inspections and assist in facilitation of corrective actions, • Prepares and attaches a variety of property identification markers, • Records incoming and outgoing inventory and/or material in the appropriate computer system(s) or hard copy record(s), • Maintains control, accountability, and accurate inventory records of production components and Government Property, including identification, location, custody, status, and movement., • Serve as the primary Materials point of contact for day-to-day Government Property tracking and accountability., • Maintain accurate Government Property records in applicable business systems, property logs, spreadsheets, and/or customer-required systems., • Track Government Property from receipt through storage, issue, transfer, movement, return, and disposition, maintaining traceability and supporting documentation., • Ensure Government Property is properly identified, tagged, segregated, stored, and protected in accordance with company procedures and applicable contract requirements., • Perform and support periodic physical inventories and reconciliations of Government Property; research and resolve record-to-floor discrepancies., • Support internal, customer, DCMA, and other Government Property audits by providing records, reports, documentation, and physical inventory verification as requested., • Identify and promptly report lost, damaged, destroyed, or otherwise discrepant Government Property and assist with investigation and corrective actions., • Coordinate with Production, Programs, Purchasing, Receiving, Quality, and other departments to maintain accurate Government Property accountability throughout the material lifecycle., • Restocks inventory to assure it is at the appropriate level. Documents and restocks returned inventory. Identify, report, and investigate inventory shortages, overages, or discrepancies, • Fulfills standard and immediate inventory requests and kits manufacturing requests, • Packages, labels, and documents items for shipping, • Inputs data to maintain configuration management compliance with various computer software systems, • Assist in compliance with ISO 9001 and participate in continuous improvement activities Requirements • High school diploma or GED, • 2-3 years of experience in manufacturing administration and scheduling, • US Citizen (requirement), • Experience working in a production environment, • Solid judgment to proactively identify and solve complex problems, • Experience utilizing computer-based manufacturing and planning tools, • Ability to visually present current and projected production plans, inventory levels, and potential shortfalls, • Strong attention to detail, good organizational skills, and the ability to prioritize in changing situations, • Excellent collaboration and communication skills across departments and with supervisors and managers, • High school diploma and two or more years of experience in a shipping/receiving and inventory control environment. Additional education may be substituted in lieu of work experience, • Familiar with using office and specialized inventory/stock control software to track and record inventory levels and prepare requested reports and information and must be able to work extended hours as required., • Experience with material handling equipment, • Material Handling Equipment Certifications highly desired, • Familiarity with DCMA contract property administration requirements and Government Property accountability requirements desired, • Experience tracking Government-furnished property (GFP), Government-owned property, customer-owned property, or other controlled assets is highly desired., • Ability to maintain detailed property records and support physical inventories, reconciliations, audits, and reporting requirements. Nice to have: • Electronics manufacturing background, • Microsoft Excel expertise, • Participated in or supported IS9001 and AS9100 quality management systems and/or audits, • Experience with Microsoft Dynamics 365 Business Central, SharePoint, Microsoft Project, Power BI, Fishbowl Inventory Management System, and/or Jira, • Planned first article builds and low-rate initial production runs, • Assisted in establishing production processes More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Rate: $34 - $40 Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description The Packaging Technician II is responsible for independently performing packaging, bottling, labeling, and material handling operations in accordance with established procedures, quality standards, and regulatory requirements. This role serves as an experienced technician within the packaging function, supporting production goals through advanced equipment operation, troubleshooting, training, and process improvement activities. Packaging Technician II ensures the accurate completion of production documentation, maintains compliance with Good Manufacturing Practices (GMP), and serves as a technical resource to team members. Success in this position requires strong attention to detail, problem-solving skills, and the ability to work effectively in a fast-paced, team-oriented manufacturing environment with minimal supervision. Job Responsibilities: (Primary Duties, Roles, and/or Authorities) · Perform routine and advanced packaging operations in accordance with approved procedures, work instructions, and production schedules. · Operate packaging equipment, including pipettes, scales, labeling systems, printers, and other production tools. · Perform in-process inspections to verify product identity, labeling accuracy, package integrity, and documentation completeness. · Support label creation, printing, reconciliation, and packaging documentation activities. · Manage packaging materials and supplies, including receiving, staging, inventory control, and disposition activities. · Conduct line clearances, equipment setup, product changeovers, cleaning, and routine equipment maintenance activities. · Troubleshoot basic packaging process, equipment, and material issues, escalating complex issues as appropriate. · Maintain accurate production data within SAP and other manufacturing systems. · Complete batch records, production documentation, and system transactions accurately and in compliance with GMP requirements. · Monitor inventory levels and communicate material shortages or potential supply constraints. · Train and provide day-to-day guidance to Packaging Technician I employees and new team members. · Perform advanced equipment troubleshooting and adjustments. · Support investigations related to deviations, nonconformances, and quality events. · Assist with implementation of process improvements to enhance safety, quality, delivery, and operational efficiency. · Support qualification, validation, and implementation activities for new packaging processes, materials, and equipment. · Collaborate with Manufacturing, Quality, Planning, Engineering, and Warehouse teams to support operational objectives. · Review packaging documentation for completeness and accuracy prior to submission. · Demonstrate proficiency across multiple packaging processes and provide operational flexibility as needed. · Adhere to all GMP, ISO, FDA, Environmental Health & Safety (EH&S), and company quality system requirements. · Perform other duties as assigned. Education and Experience: · High school diploma, GED, or equivalent required. · Ability to effectively read, write, and communicate in English. · Basic computer proficiency, including data entry and use of common software applications. · Ability to perform basic mathematical calculations with accuracy. · Minimum 2 years of experience in manufacturing, packaging, laboratory, or related operational environment. · Demonstrated ability to follow written procedures, work instructions, and standard operating procedures (SOPs). · Strong attention to detail and ability to work effectively in a fast-paced, team-oriented environment Knowledge and Skills: · Strong organizational and time management skills, with the ability to effectively prioritize multiple tasks and deadlines. · Self-motivated and capable of working independently with minimal supervision while maintaining productivity and quality standards. · Effective written and verbal communication skills, with the ability to collaborate across teams and functions. · Demonstrated ability to quickly learn and apply new processes, technologies, and methodologies. · Strong attention to detail and commitment to accuracy, quality, and compliance. Physical Demands: (if applicable) · Ability to safely lift and transport materials weighing up to 30 pounds, utilizing appropriate ergonomic practices and seeking assistance when necessary. · Ability to perform repetitive manual production and packaging activities throughout the duration of the shift, including operation of manual and electronic pipettors, manual vial capping and torque verification, operation of automated torque equipment, application of product labels, assembly of final packaging configurations, and operation of bagging and packaging equipment. · Demonstrated dexterity and hand-eye coordination required to perform detailed packaging and assembly tasks with accuracy and consistency. · Ability to stand, walk, reach, and perform repetitive motions for extended periods while maintaining productivity and quality standards. Work Environment: (if applicable) The Packaging Technician works in a laboratory and production environment where reagents are filled, dispensed, labeled, and packaged into customer-facing products. Responsibilities are primarily performed at laboratory bench workstations and packaging equipment stations, requiring adherence to established quality, safety, and regulatory standards. The role involves the use of manual and electronic pipettors, labeling equipment, packaging machinery, and other production-related tools. Employees are required to wear appropriate personal protective equipment (PPE), including laboratory coats, gloves, and safety eyewear, and must comply with all Environmental Health & Safety (EH&S) requirements. The position requires the ability to perform repetitive tasks, maintain attention to detail, and work effectively in a fast-paced, team-oriented manufacturing environment while supporting production schedules and quality objectives

Job Description The Packaging Technician I is responsible for performing routine bottling, labeling, packaging, and material handling activities in accordance with established procedures, work instructions, and quality standards. This role ensures accurate completion of packaging documentation, including batch records, standard operating procedures (SOPs), work instructions, and material processing requests. The Packaging Technician I supports safe, efficient, and compliant operations while maintaining product quality and regulatory requirements. Success in this role requires strong attention to detail, the ability to follow standardized processes, and effective collaboration in a fast-paced, team-oriented manufacturing environment. Job Responsibilities: (Primary Duties, Roles, and/or Authorities) · Perform routine bottling, labeling, packaging, and material handling activities in accordance with approved procedures, work instructions, and quality standards. · Meet daily, weekly, and monthly production targets while maintaining high levels of quality, accuracy, and efficiency. · Operate packaging equipment, including pipettes, scales, labeling systems, printers, and other production tools. · Perform in-process inspections to verify product identity, labeling accuracy, package integrity, and documentation completeness. · Complete batch records, production documentation, and system transactions accurately and in compliance with GMP requirements. · Support label creation, printing, and packaging documentation processes. · Manage packaging supplies and materials, including receiving, storing, staging, inventory control, and disposition activities. · Conduct line clearances, equipment setup, product changeovers, cleaning, and basic equipment troubleshooting. · Maintain accurate production data within SAP and other manufacturing systems. · Maintain a clean, organized, and inspection-ready work environment utilizing 5S principles. · Identify, document, and communicate quality, safety, equipment, and process-related issues to supervisor. · Participate in investigations, corrective actions, continuous improvement initiatives, and audit support activities. · Collaborate effectively with Manufacturing, Quality, Planning, Warehouse, Engineering, and other cross-functional teams. · Adhere to all GMP, ISO, FDA, Environmental Health & Safety (EH&S), and company quality system requirements. · Perform other duties as assigned. Education and Experience: · High school diploma or equivalent required. · Ability to effectively read, write, and communicate in English. · Basic computer proficiency, including data entry and use of common software applications. · Ability to perform basic mathematical calculations with accuracy. · 0-2 years of experience in a manufacturing, packaging, laboratory, or related operational environment. · Demonstrated ability to follow written procedures, work instructions, and standard operating procedures (SOPs). · Strong attention to detail and ability to work effectively in a fast-paced, team-oriented environment Knowledge and Skills: · Strong organizational and time management skills, with the ability to effectively prioritize multiple tasks and deadlines. · Self-motivated and capable of working independently with minimal supervision while maintaining productivity and quality standards. · Effective written and verbal communication skills, with the ability to collaborate across teams and functions. · Demonstrated ability to quickly learn and apply new processes, technologies, and methodologies. · Strong attention to detail and commitment to accuracy, quality, and compliance. Physical Demands: (if applicable) · Ability to safely lift and transport materials weighing up to 30 pounds, utilizing appropriate ergonomic practices and seeking assistance when necessary. · Ability to perform repetitive manual production and packaging activities throughout the duration of the shift, including operation of manual and electronic pipettors, manual vial capping and torque verification, operation of automated torque equipment, application of product labels, assembly of final packaging configurations, and operation of bagging and packaging equipment. · Demonstrated dexterity and hand-eye coordination required to perform detailed packaging and assembly tasks with accuracy and consistency. · Ability to stand, walk, reach, and perform repetitive motions for extended periods while maintaining productivity and quality standards. Work Environment: (if applicable) The Packaging Technician works in a laboratory and production environment where reagents are filled, dispensed, labeled, and packaged into customer-facing products. Responsibilities are primarily performed at laboratory bench workstations and packaging equipment stations, requiring adherence to established quality, safety, and regulatory standards. The role involves the use of manual and electronic pipettors, labeling equipment, packaging machinery, and other production-related tools. Employees are required to wear appropriate personal protective equipment (PPE), including laboratory coats, gloves, and safety eyewear, and must comply with all Environmental Health & Safety (EH&S) requirements. The position requires the ability to perform repetitive tasks, maintain attention to detail, and work effectively in a fast-paced, team-oriented manufacturing environment while supporting production schedules and quality objectives

Job Description On-Site; M-F; 5:00am - 1:30pm In-Person interviews The Packaging Technician I is responsible for performing routine bottling, labeling, packaging, and material handling activities in accordance with established procedures, work instructions, and quality standards. This role ensures accurate completion of packaging documentation, including batch records, standard operating procedures (SOPs), work instructions, and material processing requests. The Packaging Technician I supports safe, efficient, and compliant operations while maintaining product quality and regulatory requirements. Success in this role requires strong attention to detail, the ability to follow standardized processes, and effective collaboration in a fast-paced, team-oriented manufacturing environment. Job Responsibilities: (Primary Duties, Roles, and/or Authorities) · Perform routine bottling, labeling, packaging, and material handling activities in accordance with approved procedures, work instructions, and quality standards. · Meet daily, weekly, and monthly production targets while maintaining high levels of quality, accuracy, and efficiency. · Operate packaging equipment, including pipettes, scales, labeling systems, printers, and other production tools. · Perform in-process inspections to verify product identity, labeling accuracy, package integrity, and documentation completeness. · Complete batch records, production documentation, and system transactions accurately and in compliance with GMP requirements. · Support label creation, printing, and packaging documentation processes. · Manage packaging supplies and materials, including receiving, storing, staging, inventory control, and disposition activities. · Conduct line clearances, equipment setup, product changeovers, cleaning, and basic equipment troubleshooting. · Maintain accurate production data within SAP and other manufacturing systems. · Maintain a clean, organized, and inspection-ready work environment utilizing 5S principles. · Identify, document, and communicate quality, safety, equipment, and process-related issues to supervisor. · Participate in investigations, corrective actions, continuous improvement initiatives, and audit support activities. · Collaborate effectively with Manufacturing, Quality, Planning, Warehouse, Engineering, and other cross-functional teams. · Adhere to all GMP, ISO, FDA, Environmental Health & Safety (EH&S), and company quality system requirements. · Perform other duties as assigned. Education and Experience: · High school diploma or equivalent required. · Ability to effectively read, write, and communicate in English. · Basic computer proficiency, including data entry and use of common software applications. · Ability to perform basic mathematical calculations with accuracy. · 0-2 years of experience in a manufacturing, packaging, laboratory, or related operational environment. · Demonstrated ability to follow written procedures, work instructions, and standard operating procedures (SOPs). · Strong attention to detail and ability to work effectively in a fast-paced, team-oriented environment Knowledge and Skills: · Strong organizational and time management skills, with the ability to effectively prioritize multiple tasks and deadlines. · Self-motivated and capable of working independently with minimal supervision while maintaining productivity and quality standards. · Effective written and verbal communication skills, with the ability to collaborate across teams and functions. · Demonstrated ability to quickly learn and apply new processes, technologies, and methodologies. · Strong attention to detail and commitment to accuracy, quality, and compliance. Physical Demands: (if applicable) · Ability to safely lift and transport materials weighing up to 30 pounds, utilizing appropriate ergonomic practices and seeking assistance when necessary. · Ability to perform repetitive manual production and packaging activities throughout the duration of the shift, including operation of manual and electronic pipettors, manual vial capping and torque verification, operation of automated torque equipment, application of product labels, assembly of final packaging configurations, and operation of bagging and packaging equipment. · Demonstrated dexterity and hand-eye coordination required to perform detailed packaging and assembly tasks with accuracy and consistency. · Ability to stand, walk, reach, and perform repetitive motions for extended periods while maintaining productivity and quality standards. Work Environment: (if applicable) The Packaging Technician works in a laboratory and production environment where reagents are filled, dispensed, labeled, and packaged into customer-facing products. Responsibilities are primarily performed at laboratory bench workstations and packaging equipment stations, requiring adherence to established quality, safety, and regulatory standards. The role involves the use of manual and electronic pipettors, labeling equipment, packaging machinery, and other production-related tools. Employees are required to wear appropriate personal protective equipment (PPE), including laboratory coats, gloves, and safety eyewear, and must comply with all Environmental Health & Safety (EH&S) requirements. The position requires the ability to perform repetitive tasks, maintain attention to detail, and work effectively in a fast-paced, team-oriented manufacturing environment while supporting production schedules and quality objectives

Job Description Responsibilities: • This position IS NOT related to shipping OR shipment packaging., • This is a manufacturing type position and involves filling of liquid antibodies into small vials in a laboratory environment and using lab instruments such as pipettes, peristaltic pumps, and analytical balances., • A science and/or manufacturing background is required., • Learn and understand: Basic Packaging process flow, Basic Inventory and supplies management process flow, Basic bottling techniques for all single vial purified and conjugate materials, Basic packaging processes including bagging and labeling, Use of pipette, scale and other packaging equipment as required, Support label creation process by learning and operating all labeling equipment., • Meet daily/weekly/monthly departmental production objectives efficiently and effectively with a high degree of quality., • Must have ability to independently organize individual schedules to meet departmental goals., • Ability to follow general instructions on routine tasks and detailed instructions on new tasks., • Support departmental packaging supplies and material management function including storing, retrieving, and staging supplies/materials as required., • Support technical manual and technical data sheet preparation and operate associated equipment to produce printed literature., • Support daily shift start up meetings., • Understand and input packaging data, as required, in the SAP system and/or other Production Planning/Manufacturing Resource database system(s)., • Follow all department guidelines and procedures., • Follow Client Biosciences Environmental, Health and Safety (EH&S) policies and procedures., • Takes responsibility for safety in immediate work area., • Participates in EH&S programs., • Notifies supervisors of all observed hazardous conditions or unsafe work practices., • May provide recommendations on maintaining the safety of the work environment., • Other duties as assigned by Supervisor. Requirements: • Liquid Dispense/PKG Equipment Pipettes, peristaltic pumps, analytical balances, etc., • Math Skills: Ability to calculate fill volume based on concentration (mg/ml); understanding of the metric system., • The Packaging Department processes material in a laboratory environment/production area with lab bench work surfaces for filling/dispensing research reagents into customer facing vials using electronic and manual pipettors., • The packaging technician gathers the materials required for their order: liquid bulk reagent (antibody or buffer), vials/bottles, caps, paperwork, labels and prepares and organizes the starting materials accurately and then presents the production order setup for line clearance., • A trained associate (Line Clearance Technician) then verifies the accuracy of the materials and paperwork then signs-off on the paperwork to allow the Packaging, • Technician to proceed with the completion of the order., • Weekly schedules are provided to the Packaging Technicians, with daily priorities indicated. The priorities can change, and Packaging Coordinators will relay any change in assignment priority to the Packaging Technicians., • Packaging Technicians receive approximately 4-7 assignments per 8-hour shift., • The orders vary in quantity from 8 eaches to 1000-2000 each build sizes., • Orders over 500 eaches are assigned more than one technician to allow completion in a timely manner and allow the technicians to rotate the tasks for ergonomic safety., • The Packaging Technician is required to wear long pants or skirt that covers the leg entirely down to the ankle, no visible skin exposed., • Closed-toe and closed-heel shoes that cover the entire foot are required and no visible ankle/leg skin is allowed., • Attire is casual with no ripped or torn clothing and must be appropriate for the workplace., • The laboratory area requires a labcoat to be worn and gloves and goggles are required when performing benchwork that poses a spill or splash risk: bottling/filling, capping, transferring, measuring, etc., • Technicians may stand or sit at the bench to perform their assignments., • Most associates choose to stand to perform the filing, capping, labeling, and packaging activities., • Packaging Technicians often stand for large kit assembly events and at times manage items up to 20-30 pounds, requesting assistance when required for ergonomic safety., • Responsible for the manual inspection, labeling, and packaging of clinical and commercial products., • Perform finished product packaging as required to satisfy all customer, internal, clinical, and other demand., • Ensure finished product is packaged in accordance with procedures and Quality specifications., • Inspect in-process packaging, components to ensure consistent quality and remove defective products and packaging material., • Maintain timely and accurate documentation of manufacturing activities related to product packaging, including but not limited to device history records and inventory counts., • Perform simple mathematical calculations required to assist in completion of batch records., • Assist with inventory counting activities as required., • Participate in safety audits as required and actively engage in daily safety discussions/observations. Perform routine cleaning of packaging station and processing equipment., • Abide by all personal protective equipment and product contamination control (i.e. gowning) requirements., • Handle hazardous waste as appropriate. Qualifications: • High school diploma/GED., • A minimum of 6 months of industry work experience required., • Strong attention to detail., • Work well in a team environment., • Good documentation practices., • Must be willing and able to work a flexible work schedule including static or rotating shifts and overtime as required., • Familiarity with computers and various software for general business functionality., • Must be able to perform basic mathematical calculations.

Job Description Job Title: Clean Room Technician I Location: San Diego, CA Duration: 5 Months Shift timing: 9 AM - 5:30 PM Duties: The Bottling Technician 1 for the BMIA group will be responsible for filling, capping, labeling, and completing batch records, and putting away Finished Good Inventory (FGI). They will also be responsible for kit assembly and product pouching. This is a highly team-oriented group which involves working closely with other core teams within the BMIA Departments (LEGENDplex and ELISA) as well as other departments such as Planning, Receiving, Inventory Control, Custom Solution Team (CST), Packaging, ClientI, and Quality Control groups Skills: Adhere to all BSL2 safety policies, correct procedures, dress code and health/safety guidelines Follow line clearance policies to avoid cross contamination, mix-ups or incorrect items bottled Perform kit assembly processes and pouching processes Perform various bottling related tasks to include dispensing antibody solutions, capping and labeling of vials, tubes or bottles. Verify materials and documents to ensure information such as concentrations, lots number etc. are correct. Ability to perform simple Math calculations. Put away finished good products in their designated temperature conditions. Use computer programs such as Microsoft Excel. Set up and prepare equipment for ongoing operations. Operate computer-controlled process support/process equipment (i.e., filling line, lyophilizer, capping, labeling machines, etc.). Correctly follow SOP instructions for completion of job tasks. Clean and maintain work area and all lab equipment and supplies, adhering to 5S guidelines Maintain accurate training records and ensure on-time completion of training documents Follow all GDP policies Other projects or responsibilities as required. Education: High school diploma/GED or some college. 6 months of experience in a laboratory and/or biotech manufacturing and/or filling/bottling/packaging working environment

Job Description DPP is seeking an Electronic Technician III for an opportunity with our client in the Aerospace and Defense Manufacturing industry. Work Location: Onsite in San Diego, CA Duration: 12 months Terms: W2 Contract Work Authorization: US Citizen Responsibilities: • Assemble, install, test, and maintain electronic systems, components, and equipment., • Diagnose and repair circuit boards, wiring, and other electronic components., • Perform operational tests at environmental stress screening, vibration, and thermal levels to ensure compliance with design specifications., • Identify and isolate malfunctions down to the component level., • Conduct defined engineering tests and collect assigned data., • Document test results, repairs, and maintenance activities accurately., • Perform diagnostics and root cause analysis using oscilloscopes, multimeters, RF generators, and spectrum analyzers., • Maintain compliance with all CAT 2 Foreign Object Elimination (FOE) and Foreign Object Damage (FOD) safety, quality, and Electrostatic Discharge (ESD) standards.Required Qualifications:, • 4 years of related experience or electronics training equivalent to 2 years of technical trade school or military technical school., • Experience troubleshooting analog and digital circuits.Preferred Qualifications:, • Familiarity with RF systems, digital/analog circuits, or embedded electronics., • Experience with Component-level troubleshooting., • Experience with VOM, DVM, and similar test apparatus., • IPC-A-610 Class III Surface Mount. Interested? Learn more: Click the apply button to learn more about this position (#26-01339).

Job Description THIS POSTION IS FOR ACTIVE-DUTY MILITARY CANDIDATES ONLY The Department of Defense SkillBridge program is an opportunity for service members to gain valuable civilian work experience during their last 180 days. SkillBridge connects service members with companies in providing real-world job experiences. Position Overview The Calibration Technician will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician may be asked to report opinions and interpretations. Responsibilities and Duties • Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications, • Maintain primary and/or intrinsic calibration standards, • Maintain secondary and/or working calibration standards, • Perform maintenance, troubleshooting and repair of precision equipment, • Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements, • Collect, compile, measure, summarize, and record data gathered during calibration., • Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc, • Identify and correct measurement errors, as applicable, • Prepare calibration reports and certificates, • Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used, • Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes, • Train subordinates in calibration concepts and procedures, • Interact with other technicians, Customer Service Representatives, Account Managers, and customers, • Other duties and responsibilities as may be assigned Qualifications • Minimum High School diploma or equivalent, • Must be able to perform general math and algebra functions, • Understanding of Basic Statistics, • Must possess good written and oral, communication skills, • Technical writing ability, • Intermediate ability to troubleshoot repair, align and optimize precision equipment, • Intermediate computer skills, • Proficient in use of MS Word and Excel, • Minimum three years of calibration experience some of which can be offset with formal metrology training, • Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540), • Must have great interpersonal and customer service skills, • Strong attention to details, • Must be a self-motivator, work as a team player, and follow written procedures Physical Demands • Must be able to lift up to 45 pounds without assistance, • Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer • Full - Time, non-exempt position, • Excellent benefits package includes; medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health, child care spending accounts and tuition reimbursement, • Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training. For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times. To all recruitment agencies: SIMCO Electronics does not accept agency resumes. Please do not forward resumes to our jobs alias, SIMCO Electronics employees or any other company location. SIMCO Electronics is not responsible for any fees related to unsolicited resumes.

Job DescriptionQA Specialist I Location: San Diego, CA Onsite Flexibility: Onsite Contract Details • Position Type: Contract, • Contract Duration: 6 months (with potential for extension/conversion), • Pay Rate: $29.15 / Hour (USD), • Shift / Schedule: 1st Shift, • Work Authorization: Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.Key Responsibilities, • Responsible for running in-process, stability/calibration, final release, and experimental devices., • Notifying appropriate personnel of results and completing all associated data and documentation., • Cross-trained on all processes, including in-process, stability, calibration, and final release., • Able to solve process-related questions/problems and minor investigations., • Review device history records., • Train new employees/Quality Control Technician I., • Operate laboratory equipment safely, as trained and directed, in accordance with established practices., • Responsible for inventory of all testing-related materials., • Demonstrates commitment to the development, implementation, and effectiveness of Alere Quality Management System per ISO, FDA, and other regulatory agencies., • Understands and is aware of the quality consequences which may occur from the improper performance of their specific job; has awareness of device defects that may occur in their area of responsibility, including product design, verification and validation, manufacturing and testing activities., • Responsible for exhibiting professional behavior with internal/external business associates that reflects positively on the company and is consistent with the company's policies and practices; build productive internal/external working relationships., • Carries out duties in compliance with established business policies., • Other duties as assigned, according to the changing needs of the business.Education Requirements, • High School / GED graduate or equivalent (required), • BS in a science-related field (preferred)Required Experience, • 2 5 years of relative work experiencePreferred Skills, • 2 5 years of laboratory experience in quality control/assurance or a manufacturing environment, preferably in vitro diagnostics, • Proficient with Microsoft Office Suite; strong knowledge of Excel, • Organized and detail-oriented, • Ability to work in a team environment, • Able to multitask and adapt to changes in task priorities, • Continually develops his/her own skill set., • Acts ethically and takes accountability for achieving outcomes., • Actively develops a network to bring best solutions to the team or customer.Benefits, • Medical, Vision, and Dental Insurance Plans, • 401k Retirement FundAbout the Client This global healthcare innovator has been advancing medical technology for more than 140 years, delivering life-changing diagnostics, medical devices, nutritional science, and pharmaceutical products to patients in more than 160 countries. The organization operates across four major business segments medical devices, nutritional products, diagnostics, and established pharmaceuticals and employs biomedical engineers, clinical scientists, regulatory affairs specialists, and commercial operations professionals across its worldwide footprint. With more than 80 percent of employees reporting it is a great place to work and a certified Great Place to Work designation well above the national average, the company has built a culture grounded in inclusion and innovation that supports cross-functional teams and international career growth. About GTT GTT is a minority-owned staffing firm and a subsidiary of Chenega Corporation, a Native American-owned company in Alaska. We highly value diverse and inclusive workplaces and support Fortune 500 organizations across banking, financial services, technology, life sciences, biotech, utilities, and retail sectors throughout the U.S. and Canada. Job Number: 26-16770 Industry: Manufacturing & Operations #gttmf

Job DescriptionElevate Your Career as a CNC Electronic Systems Technician Level 2 About Senior Operations SoCal Welcome to a company that thrives on technology and innovation. At Senior Operations SoCal, our commitment to excellence is driven by our values: Safety, Integrity, Customer Focus, Respect & Trust, Accountability, and Excellence. We pride ourselves on fostering a team-oriented atmosphere where collaboration and customer-centric solutions are at the forefront of what we do. Your Role and Responsibilities As a CNC Electronic Systems Technician Level 2, your expertise will be pivotal in ensuring that our CNC machinery continues to operate at peak efficiency. You'll engage in tasks such as diagnosing issues, performing preventative maintenance, and conducting thorough repairs and upgrades on electronic and mechanical components. • Carefully inspect and assess CNC systems to diagnose and remedy faults., • Implement routine and preventative maintenance measures to avert operational disruptions., • Collaborate in process improvement initiatives and foster lean manufacturing practices. The Expertise You Bring • Strong proficiency in reading and interpreting technical documents and schematics., • A keen eye for detail coupled with a solid mechanical aptitude., • Expert knowledge in handling programmable logic controllers and printed circuit boards. Why Choose Us? By joining Senior Aerospace Ketema, you're not just taking on a job—you're embarking on a journey of growth and development. Our competitive compensation package, including a robust salary and benefits, underscores our commitment to employee well-being and advancement. Compliance and Legal Requirements Before you dive into our workforce, please be advised of the following prerequisites related to employment. If offer of employment is made it will be contingent upon passing all the following: Drug Test, Background Check, ITAR and U.S. Export Compliance Screening. Equal Opportunity Employer: minority/female/disability/veteran Access to our facilities is restricted under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data.

Job Description Looking for an RF engineer or experienced RF technician to provide analysis and improvement of production designs and will also be required to aid in new/custom product development. Responsibilities: • Work with management and sales to create new design to expand product lines. Will be responsible for the design of new ideas and implementation., • Analyze production failures through visual analysis with a microscope, detailed electrical testing, and consultation with engineering staff, • Draft and review engineering drawings using AutoCAD and LabView, • Document product changes through the engineering change notice procedure, • Test, tune, and debug established products Requirements: • AS or BS in Electrical Engineering, Physics, RF Engineering or related field, • Strong understanding of RF principles, • Experience with LabView, • 2-3 years experience with designing and/or testing RF/Microwave subsystems, • Experience with VCOs and PLLs a plus\nCompany Description Z-Communications Inc. has been leading the wireless component industry almost four decades, especially in Voltage-Controlled Oscillator (VCO) and Phase-Locked Loop (PLL) technology. We are the largest manufacturer of VCO and PLL modules for the commercial/wireless market. To ensure excellence as the leading RF/Microwave component supplier, Z-Communications, Inc. invests in continuous research and development to develop state of the art RF/Microwave components. We hold patents in ultra low noise technology, which enable us to provide excellent performance. Z-Comm’s advanced technology and well equipped R&D facility is matched by its leading edge manufacturing facility. Equipped with a state of the art automated assembly process and testing equipment we guarantee our customers the highest quality solutions that are delivered on time and at a reasonable price. We strive to meet customer expectations and exceed them. We value your relationship and we will do everything possible to strengthen the relationship for many years to come. Z-Communications Inc. has been leading the wireless component industry almost four decades, especially in Voltage-Controlled Oscillator (VCO) and Phase-Locked Loop (PLL) technology. We are the largest manufacturer of VCO and PLL modules for the commercial/wireless market. \r\n\r\nTo ensure excellence as the leading RF/Microwave component supplier, Z-Communications, Inc. invests in continuous research and development to develop state of the art RF/Microwave components. We hold patents in ultra low noise technology, which enable us to provide excellent performance.\r\n\r\nZ-Comm’s advanced technology and well equipped R&D facility is matched by its leading edge manufacturing facility. Equipped with a state of the art automated assembly process and testing equipment we guarantee our customers the highest quality solutions that are delivered on time and at a reasonable price. We strive to meet customer expectations and exceed them. We value your relationship and we will do everything possible to strengthen the relationship for many years to come.

Job DescriptionAbout TruvianWant to join a fast-paced, innovative company that is transforming the future of blood testing? Truvian is a healthcare technology company operating at the intersection of diagnostics and consumer technology. We have developed an automated benchtop diagnostic platform that delivers laboratory-quality results in minutes across a broad range of health tests.Our proprietary, FDA-cleared technology is designed to make blood testing more accessible, convenient, and affordable by providing comprehensive results from a single small blood sample in minutes throughout a broad range of locations. We are continuing to advance our technology’s capabilities to further redefine point-of-care testing and bring high-quality healthcare closer to where patients need it most.To us, our work at Truvian is more than a job – It’s a mission. We are a culture dedicated to discovery and empowerment. We are trailblazers on the path to put health information where it belongs - in the hands of the individual. We are partners in the belief that talented people, working as a team, can make every day an adventure. Come join us as we realize our vision to make routine health testing convenient, affordable, and actionable for today’s connected consumers!Job SummaryTruvian is seeking a driven Quality Control Technician to support our Quality Control team for approximately 3–6 months. This is a temporary position. This is a hands-on, bench-based position responsible for supporting in-process testing of bulk materials, reagents, consumable kits, and finished products. The Quality Control Technician will perform testing on Truvian’s automated blood-testing platform by following established standard operating procedures. Responsibilities will include routine operation and maintenance of laboratory equipment, assembly of test components, evaluation of test results, and accurate documentation of observations and results. This individual will work closely with Quality Control team members, scientists, engineers, Manufacturing, and other cross-functional partners to support testing, product release, troubleshooting, and laboratory operations. The successful candidate will bring strong attention to detail, sound documentation practices, flexibility, and a team-oriented approach. This position will report to the Manager, Quality Control. Location and Work Arrangements Location: San Diego, CA (Onsite) This role requires regular onsite work. We welcome applications from qualified candidates; however, relocation assistance is not provided for this position. Candidates should be located within commuting distance of the office. Visa Sponsorship Candidates must be authorized to work in the United States on a full-time basis. Truvian does not currently provide visa sponsorship or support employment-based immigration petitions for this role. Work Schedule This position offers multiple shift and schedule opportunities. Available shifts may include First Shift and Swing Shift, with workweek schedules of Monday–Friday, Tuesday–Saturday, or Wednesday–Sunday or an alternative workweek schedule of four 10-hour days, Sunday through Wednesday. Final shift and schedule assignments will be based on position availability and business needs. Here’s Why You Will Love this Job: • You will have a hands-on, participant-facing role supporting clinical studies at Truvian to generate data that substantiate the performance of Truvian's breakthrough blood testing technology., • You'll work with a rock-star team of people who are passionate about the work they do and our ability to disrupt healthcare with our innovative products., • You’ll be part of a team responsible for the company’s growth and product launch., • You’ll thrive in a fast-paced, dynamic environment where you can implement fresh ideas and new processes and make things happen quickly without a bunch of red tape., • You’ll have great perks such as generous benefits (Medical/Dental/Vision/EAP/Paid Life Insurance/LTD/401K), accrued vacation, and on-site wellness perks.What You Will Do, • Perform routine Quality Control testing of bulk materials, reagents, consumable kits, and finished products., • Operate the Truvian automated blood-testing platform according to approved procedures and training., • Follow established test methods, standard operating procedures, specifications, and acceptance criteria., • Evaluate test results and promptly escalate unusual results, discrepancies, or potential quality issues., • Accurately document observations, activities, and test results in accordance with Good Documentation Practices., • Support the timely completion, review, and transmission of Quality Control test data., • Assist with investigations by gathering information, documenting findings, and preparing investigation summaries., • Perform routine operation, cleaning, and maintenance of laboratory equipment., • Verify equipment readiness and calibration status before use., • Assemble test parts, consumables, or other components as required., • Support troubleshooting activities, assay validation, and other special laboratory projects as assigned., • Collaborate cross-functionally to support product release and resolve testing or documentation issues., • Follow current Good Manufacturing Practices and Truvian’s Quality Management System, policies, procedures, and training requirements., • Help maintain a clean, organized, and safe laboratory environment., • Assist with restocking laboratory supplies and maintaining inventory., • Participate in process and operational improvement activities., • Manage multiple responsibilities and adapt to changing priorities., • Perform other duties as assigned.What You Will BringRequired Qualifications, • Bachelor’s degree in Biology, Chemistry, Biochemistry, or a related scientific discipline, or an equivalent combination of education and relevant experience., • Minimum of 3 years of Quality Control, laboratory testing, manufacturing testing, or other directly related experience., • Familiarity with laboratory or quality testing methods., • Experience following standard operating procedures, test methods, work instructions, or established laboratory protocols., • Experience documenting laboratory observations and test results accurately and completely., • Strong organizational and prioritization skills., • Strong attention to detail and the ability to carefully follow written instructions., • Ability to recognize defects, discrepancies, and unusual test results., • Strong verbal and written communication skills., • Ability to work independently while contributing effectively within a team., • Ability to manage multiple assignments and complete tasks by established deadlines., • Flexibility to respond to changing operational demands and priorities., • Ability to identify and distinguish between colors.Preferred Qualifications, • Experience in a medical device, diagnostics, biotechnology, pharmaceutical, or other regulated environment., • Experience working under current Good Manufacturing Practices., • Familiarity with Quality Management Systems and Good Documentation Practices., • Experience operating automated laboratory instruments or diagnostic platforms., • Experience with reagent, consumable, in-process, or finished-product testing., • Exposure to nonconformance investigations, troubleshooting, product release, or assay validation.The benchmark requires a scientific degree with a minimum of 3 years of experience, while also allowing equivalent experience. It emphasizes quality testing methods, Quality Management System knowledge, organization, communication, attention to detail, independence, deadline management, and defect recognition. Supervisory Role No Compensation $22.00 to $26.00 per hour The hourly range for this position represents the anticipated range for qualified candidates. Compensation decisions are based on a variety of factors, including relevant experience, skills, education, training, certifications, internal equity, market data, and business needs. The final compensation offered to a successful candidate will be determined based on these factors and the requirements of the role. Physical Demands and Abilities • Regularly use hands to handle laboratory materials, equipment, components, and testing supplies., • Frequently stand, walk, stoop, kneel, crouch, or move within the laboratory., • Occasionally sit, climb, or balance., • Lift and move up to 5 pounds repeatedly and safely., • Possess the close, distance, color, peripheral, and depth vision necessary to perform detailed laboratory work., • Maintain the ability to adjust focus when inspecting materials, components, and test results.Interested candidates are encouraged to submit a cover letter along with their resume. The cover letter is an opportunity to highlight how your experience in assay and/or panel architecture aligns with our mission, your approach to technical leadership and cross-functional collaboration, and how your expertise has driven innovation in diagnostic product development and complex assay systems. Truvian is an Equal Opportunity Employer and is committed to fostering a diverse, inclusive, and respectful workplace. Employment decisions are made based on qualifications, merit, and business needs. Truvian prohibits discrimination, harassment, and retaliation and does not discriminate on the basis of any characteristic protected by applicable federal, state, or local law, including race, color, religion, creed, sex, pregnancy (including childbirth, breastfeeding, and related medical conditions), gender, gender identity, gender expression, sexual orientation, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital status, military or veteran status, reproductive health decision-making, or any other legally protected status. This policy applies to all aspects of employment, including recruitment, hiring, placement, promotion, compensation, benefits, training, transfers, leaves of absence, disciplinary actions, termination, and all other terms and conditions of employment. Truvian is also committed to providing reasonable accommodations to qualified individuals with disabilities and to applicants and employees with sincerely held religious beliefs, practices, or observances, in accordance with applicable law. Powered by JazzHR IyskQvidX6

Job Description Mechanical Engineering Technician Industry: Construction Equipment / Mechanical Engineering / Industrial Machinery Position Overview Our client is an established specialty construction and engineering company seeking a talented and hands-on Mechanical Engineering Technician to join its team. This position offers an opportunity to work with specialized construction equipment, mechanical systems, and industrial machinery while contributing to equipment innovation, reliability, and operational performance. The ideal candidate combines strong mechanical engineering fundamentals with practical troubleshooting and equipment development experience. This individual will be responsible for designing, developing, testing, diagnosing, and improving mechanical, hydraulic, and electrical systems used in construction operations. The role involves collaboration with engineering, maintenance, and field operations teams to develop new equipment, optimize existing machinery, and resolve complex technical challenges. Key Responsibilities Mechanical Design & Equipment Development Design, develop, and improve mechanical, hydraulic, and electrical systems and components using CAD software such as SolidWorks and AutoCAD. Prepare engineering calculations, technical drawings, specifications, sketches, and fabrication documentation. Perform engineering analysis, including Finite Element Analysis (FEA), to evaluate equipment performance and reliability. Develop prototypes and conduct testing to validate new equipment designs and mechanical improvements. Evaluate pumps, motors, valves, cylinders, hydraulic systems, and electrical controls for functionality, safety, and efficiency. Collaborate with cross-functional teams to integrate mechanical, electrical, and hydraulic components into specialized equipment and machinery. Apply knowledge of mechanics of materials, hydraulics, electronics, engines, motors, PLCs, and control systems to solve technical challenges. Prepare equipment documentation, operating manuals, maintenance procedures, and assembly instructions. Assist with estimating material, labor, fabrication, installation, and testing costs. Field Operations & Technical Support Provide technical troubleshooting and hands-on support to field operations teams. Work closely with equipment operators to identify performance issues and recommend corrective actions. Assist with equipment setup, calibration, testing, and commissioning at project sites. Evaluate equipment performance and implement improvements to enhance productivity, reliability, and safety. Diagnose mechanical, electrical, and hydraulic problems in operating equipment. Travel to construction project sites as needed to support specialized machinery and equipment. Equipment Maintenance & Reliability Collaborate with maintenance personnel and equipment suppliers to support equipment repairs and improvements. Develop and recommend preventative maintenance schedules for machinery and mechanical systems. Conduct equipment inspections and performance evaluations to identify potential failures. Troubleshoot hydraulic pumps, motors, valves, cylinders, electrical controls, and related mechanical components. Recommend repairs, replacements, or design modifications to improve equipment reliability. Conduct operational testing of machinery and individual components to identify deficiencies and validate improvements. Analyze test results and develop practical solutions to recurring mechanical and equipment issues. Support equipment lifecycle improvements and maintenance efficiency. Qualifications & Requirements Bachelor's degree in Mechanical Engineering or Industrial Engineering required. Minimum 2 years of experience in mechanical engineering, mechanical equipment design, engineering technician work, or a related technical position. Working knowledge of hydraulic systems, mechanical components, electrical controls, and PLC systems. Hands-on experience troubleshooting hydraulic pumps, motors, valves, cylinders, and control systems. Ability to read and interpret electrical wiring diagrams, mechanical drawings, and technical specifications. Familiarity with SolidWorks, AutoCAD, or similar CAD software. Understanding of mechanical design principles, equipment testing, and troubleshooting methodologies. Knowledge of PLC-controlled machinery and electrical charging systems. Strong analytical, diagnostic, and problem-solving skills. Ability to work independently and collaborate with engineering, maintenance, and field operations teams. Strong organizational and communication skills. Willingness and ability to travel to project sites as needed. Compensation & Benefits Our client offers a comprehensive compensation and benefits package designed to support employees' professional development, financial security, and work-life balance. Compensation & Retirement Competitive base compensation Eligibility for annual performance-based incentive bonuses 401(k) retirement plan with a 100% employer match on the first 6% of employee contributions, plus an additional 3% Safe Harbor employer contribution Health & Insurance Medical insurance effective on the date of hire, with employer contributions covering approximately 80%–85% of premiums depending on plan selection Dental insurance effective on the date of hire, with approximately 75% of premiums covered by the employer Voluntary vision coverage Flexible Spending Accounts (FSA) for eligible healthcare and dependent-care expenses Company-paid life insurance, accidental death and dismemberment coverage, and long-term disability insurance Paid Time Off & Work-Life Balance Paid time off beginning at 16 days annually, increasing with tenure 9 paid company holidays Half-day Fridays during the summer months between July 4 and Labor Day Paid parental leave for eligible employees Employee Assistance Program (EAP) Professional Development & Additional Benefits Tuition reimbursement Gym reimbursement Employee referral incentive program Professional development and career advancement opportunities Internal mobility and long-term career growth Ideal Candidate Profile The ideal candidate is a mechanically inclined engineering professional who enjoys both equipment design and hands-on troubleshooting. They are comfortable working with hydraulic machinery, electrical controls, mechanical assemblies, and industrial equipment. Candidates with backgrounds in mechanical equipment design, industrial machinery, construction equipment engineering, hydraulic systems, manufacturing equipment, or mechanical engineering technology may be particularly well suited for this opportunity. This position is especially attractive to individuals who enjoy taking ownership of equipment performance, developing practical engineering solutions, and working directly with field personnel to improve machinery reliability and efficiency.

Job Description Job Description - CNC Set-up Technician Company Description Tecnadyne specializes in developing and manufacturing advanced underwater equipment, serving a diverse customer base, including government, military, offshore oil, subsea exploration, oceanography, academia, and recreational industries. Their innovative product line includes DC brushless thruster motors, rotary and linear actuators, subsea valve packs, and pressure compensators. With a focus on precision engineering, Tecnadyne is positioned as a leader in underwater technology solutions. The company emphasizes creating reliable and cutting-edge products for various subsea applications. Role Description This is a full-time, on-site role located in San Diego, CA for a CNC Set-up Technician. The CNC Set-up Technician will be responsible for setting up and operating CNC machinery, troubleshooting mechanical issues, performing instrument calibration, and conducting preventive maintenance. This role also requires ensuring the accuracy of machine output and maintaining equipment performance according to specifications. Collaboration with engineers and other technicians to support production goals and quality standards will also be essential. Essential Duties and Responsibilities • Set up CNC mills, lathes, and other machining equipment according to setup sheets, blueprints, and work instructions., • Install and indicate fixtures, vises, chucks, tooling, and workholding devices., • Load and verify CNC programs, tool offsets, and work offsets., • Perform first-article inspections and make machine adjustments as needed to meet specifications., • Read and interpret engineering drawings, GD&T, specifications, and process documentation., • Select, assemble, preset, and measure cutting tools., • Troubleshoot machining, tooling, and quality issues., • Optimize setup methods and cycle times to improve efficiency and throughput., • Verify material type, condition, and dimensions prior to production., • Collaborate with Quality personnel to ensure compliance with customer and company requirements., • Train and support CNC operators on setup requirements, inspection methods, and production processes., • Monitor tool life and recommend tooling or process improvements., • Maintain accurate setup documentation and production records., • Follow all company safety procedures and maintain a clean, organized work area., • Assist with preventive maintenance activities as required. Qualifications Required • High school diploma or equivalent., • Minimum 3 years of CNC setup experience in a manufacturing environment., • Experience with Haas CNC machines., • Ability to read and interpret blueprints, engineering drawings, and GD&T., • Experience setting up CNC mills and lathes., • Proficiency using precision measuring instruments, including:, • Micrometers, • Calipers, • Bore gauges, • Height gauges, • Indicators, • Strong understanding of machining practices, tooling selection, feeds and speeds., • Ability to lift up to 50 pounds and stand for extended periods. Preferred • Experience with GibbsCAM or similar CAM software., • Knowledge of aluminum, stainless steel, titanium, engineering plastics, and other production materials., • Forklift and overhead crane experience., • Lean manufacturing and continuous improvement experience. Knowledge, Skills, and Abilities • Strong mechanical aptitude and troubleshooting skills., • Excellent attention to detail and commitment to quality., • Ability to work independently and manage multiple priorities., • Strong communication and teamwork skills., • Positive attitude and willingness to support company goals. Physical Requirements • Frequent standing, walking, bending, and reaching., • Ability to lift, move, and handle tooling, fixtures, and materials., • Ability to safely operate manufacturing equipment and material handling devices., • Use of required personal protective equipment (PPE). Benefits Tecnadyne offers a competitive compensation package, including: • Medical, dental, and vision insurance, • 401(k) retirement plan with company match, • Paid vacation and holidays, • Opportunities for advancement and professional development

Job DescriptionDescription: Job Title: Machine shop lead/Setup Technician Location: Santee, CA Department: Production Reports To: Operations Director FLSA Status: Exempt About Discflo Corporation Founded in 1982, Discflo Corporation has earned a global reputation as an industry leader in non-impingement, laminar flow pump technology. Engineered for the most challenging and high-solids applications, our patented Discpac pumps are installed across wastewater facilities, chemical plants, oil refineries, food & beverage operations, and mining environments worldwide. With thousands of installations across the globe and a renewed focus on aggressive U.S. and international expansion, Discflo is undergoing a strategic transformation — one that requires smart, hungry professionals who believe in solving problems that others can't. Job purpose The Machine Shop Lead is responsible for overseeing all daily machine shop operations to ensure maximum efficiency, productivity, quality, and safety. This position serves as the primary technical resource within the machine shop, ensuring machine programs, tooling, fixtures, setups, and machining processes are accurate and optimized. The Machine Shop Lead is expected to provide hands-on leadership, support machinists and operators, improve cycle times, reduce downtime, and ensure all machines are operating at peak performance. This position requires a strong presence on the shop floor and ownership of machine shop operations. The Machine Shop Lead is expected to be the first person in the machine shop at the start of the day and the last person to leave, ensuring all production activities are properly supported and completed. Duties and responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential Duties and Responsibilities: Machine Shop Leadership Tooling and Fixture Management Continuous Improvement & Efficiency in Manufacturing Production and Quality Cross-Functional Support Supervision and growth of Shop Machinists - CNC Lathe, Mill and Manual Lathe Key Performance Indicators • Machine utilization and uptime, • Production efficiency and throughput, • Cycle time reductions, • Setup time reductions, • Quality performance and scrap reduction, • Accurate GS job completions and operation closures, • Completion and accuracy of in-process inspection documentation, • On-time production completion · 401K matched up to 4% by employer · Employee Benefit Bank $10.00/month towards your choice of supplemental coverage · Medical Insurance (HealthNet) 98% employer paid · Dental (Humana) 100% employer paid · Vision (EyeMed) 100% employer paid · Paid Term Life and AD&D policy ($50,000.00 total) · Standard paid holidays (listed in employee handbook, 6 days total) · Sick leave (40 hours per calendar year) · Vacation accrual - Requirements: Skills and Qualifications • Extensive experience operating and setting up CNC machining equipment., • Strong understanding of CNC programming, tooling, fixturing, and machining processes., • Ability to read and interpret engineering drawings, blueprints, and GD&T., • Strong troubleshooting and problem-solving skills., • Experience leading shop floor personnel and coordinating daily operations., • Knowledge of lean manufacturing and continuous improvement principles., • Excellent communication and organizational skills., • Ability to work independently and make sound technical decisions.

Job Description Senior RF Antenna Technician Location: San Diego, CA (On-site) Position Type: Full-Time Compensation: $80,000–$115,000+ DOE. Relo to beautiful sunny San Diego a possibility. About the Opportunity Our client is an established engineering and technology company developing advanced RF and wireless hardware. They are seeking an experienced Senior RF Technician to support the development, testing, and optimization of sophisticated RF systems. This position is ideal for someone who enjoys hands-on work in a laboratory environment and has extensive experience building, testing, troubleshooting, and refining RF hardware while collaborating closely with engineering teams. Responsibilities As a Senior RF Technician, you will provide technical leadership in the assembly, testing, and validation of RF hardware throughout the product development cycle. Responsibilities include: • Build, modify, tune, troubleshoot, and validate RF hardware and prototype assemblies., • Perform RF measurements using Vector Network Analyzers, spectrum analyzers, signal generators, power meters, and other laboratory equipment., • Support engineers with prototype development, design verification, and performance optimization., • Assist in evaluating RF performance and documenting test results for engineering review., • Troubleshoot hardware issues to component level and recommend corrective actions., • Support integration of RF assemblies into larger electromechanical systems., • Maintain calibration standards, test procedures, and laboratory equipment., • Coordinate laboratory activities while mentoring less experienced technicians as needed., • Work closely with engineering, manufacturing, and quality teams to support product development and production readiness. Minimum Qualifications • 10+ years of hands-on experience testing, troubleshooting, and supporting RF hardware (15+ years preferred)., • Associate degree in Electronics, Electrical Engineering Technology, or a related technical discipline, or equivalent industry experience., • Extensive experience using:, • Vector Network Analyzers (VNA), • Spectrum Analyzers, • Signal Generators, • Oscilloscopes, • Standard RF laboratory equipment, • Strong understanding of RF measurements, impedance matching, calibration techniques, and troubleshooting methodologies., • Experience supporting prototype development in a collaborative engineering environment., • Excellent communication skills and the ability to work effectively across multidisciplinary teams., • U.S. Citizenship with the ability to obtain and maintain a U.S. Security Clearance. Preferred Qualifications • Experience supporting antenna, microwave, or other RF subsystem development., • Familiarity with electromagnetic simulation tools such as HFSS, CST, ADS, or similar software., • Experience with RF PCB troubleshooting and hardware debugging., • Exposure to high-frequency communications, wireless systems, aerospace, defense, or other high-reliability electronic products., • Experience documenting test procedures and supporting engineering validation activities. Compensation & Benefits • Base Salary: $80,000–$100,000+ DOE, • Comprehensive medical, dental, vision, retirement, paid time off, and professional development benefits. Why Apply? This opportunity offers the chance to work alongside experienced RF engineers on technically challenging hardware development projects in a collaborative laboratory environment. You’ll have significant hands-on involvement throughout the development lifecycle while helping bring innovative RF technologies from concept through validation.

Job DescriptionPay: $18 hourly Duration: 6 months, possibility of extension Job Description: • Looking for a Bottling Technician II for our Form, Fill, and Finish Group. This role will be responsible for processing product formulations, dispensing antibody products, capping, labeling, kitting and completing batch records, and putting away Finished Good Inventory (FGI)., • This is a highly team oriented group which involves working closely with other core teams within the Bottling Department as well as other departments such as Planning, Receiving, Inventory Control, Custom Solution Team (CST), Packaging and Quality Control groups., • This is a great opportunity to get your foot in the door with a thriving and successful biotech company., • This is a fast-paced position offering the opportunity to collaborate as a team and start your career in the Biotech industry. Join us in Enabling Legendary Discovery. Essential Functions • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Assist in performing various bottling related tasks to include dispensing antibody solutions, capping and labeling of vials, tubes or bottles, and assembly of kits, • Formulate products per approved Standard Operating Procedures (SOPs) and work instructions including multi-component cocktail formulations, • Verify formulation worksheets to ensure that information such as concentrations, lot numbers etc. are correct, • Put away finished goods products according to their designated temperature conditions, • Use computer programs such as Microsoft Excel, • Set-up and prepare equipment for ongoing operations, • Operate computer-controlled process support/process equipment (i.e., filling line, lyophilizer, capping, labeling machine, etc.), • Follow instructions for completion of job tasks, • Adhere to correct procedures, policies and health/safety guidelines, • Clean and maintain work area and all lab equipment and supplies, • May perform data entry and production documentation completion tasks, • Other projects or responsibilities as may be required. Skills: Minimum Qualifications – Education and Experience • >6 months of relevant experience in a laboratory and/or biotech manufacturing and/or filling/bottling/packaging working environment and/or BS in related field, • >6 months Experience in pipetting or dispensing liquid products Education: Preferred Qualifications – Education and Experience • >6 months of experience with automatic filling machines, • Aseptic Technique in biosafety cabinet, • Demonstrated high levels of teamwork, quality, and productivity

Job Description Title: Bottling Technician Location: San Diego, CA Duration: 6 Months Duties: BioLegend is looking for a Bottling Technician II for our Form, Fill, and Finish Group. This role will be responsible for processing product formulations, dispensing antibody products, capping, labeling, kitting and completing batch records, and putting away Finished Good Inventory (FGI). This is a highly team oriented group which involves working closely with other core teams within the Bottling Department as well as other departments such as Planning, Receiving, Inventory Control, Custom Solution Team (CST), Packaging and Quality Control groups. This is a great opportunity to get your foot in the door with a thriving and successful biotech company. This is a fast-paced position offering the opportunity to collaborate as a team and start your career in the Biotech industry. Join us in Enabling Legendary Discovery. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Assist in performing various bottling related tasks to include dispensing antibody solutions, capping and labeling of vials, tubes or bottles, and assembly of kits, • Formulate products per approved Standard Operating Procedures (SOPs) and work instructions including multi-component cocktail formulations, • Verify formulation worksheets to ensure that information such as concentrations, lot numbers etc. are correct, • Put away finished goods products according to their designated temperature conditions, • Use computer programs such as Microsoft Excel, • Set-up and prepare equipment for ongoing operations, • Operate computer-controlled process support/process equipment (i.e., filling line, lyophilizer, capping, labeling machine, etc.), • Follow instructions for completion of job tasks, • Adhere to correct procedures, policies and health/safety guidelines, • Clean and maintain work area and all lab equipment and supplies, • May perform data entry and production documentation completion tasks, • Other projects or responsibilities as may be required. Minimum Qualifications Education and Experience • > 6 months of relevant experience in a laboratory and/or biotech manufacturing and/or filling/bottling/packaging working environment and/or BS in related field, • > 6 months Experience in pipetting or dispensing liquid products #TBL1

Job DescriptionLocation: San Diego, California Job Type: Full-Time, On-Site Schedule: Monday–Friday, approximately 9:00 AM–5:00 PM, with flexibility for an earlier shift Compensation: $20-$24/hour Viridian Staffing's (www.viridianstaffing.com) Client is looking for an Extraction Technician to support the operations of a cannabis extraction and distillation facility in the San Diego, California, area. Founded in 2013, Viridian Staffing is the premier staffing, recruiting, and HR consulting firm solely dedicated to organizations in and supporting the commercial, medical, and industrial cannabis/hemp industry. As an Extraction Technician, you will work closely with the Lab Manager to support daily extraction and production operations, with a primary focus on ethanol extraction and distillation. This is an exciting opportunity to join a growing operation where you'll gain hands-on experience working with specialized extraction equipment and have the opportunity to expand your technical skills as the facility grows. Your responsibilities will include receiving and preparing cannabis biomass for processing, operating milling equipment, preparing material for centrifuge-based ethanol extraction, and supporting filtration, solvent recovery, and distillation processes. You will be working with equipment such as centrifuges, pumps, membrane filtration systems, rotary evaporators, and other specialized processing equipment. You should have some prior experience working in cannabis extraction, laboratory processing, or a related manufacturing environment, ideally with exposure to ethanol extraction or distillation. While previous cannabis extraction experience is preferred, you don't need to be an expert in every piece of equipment. Our Client is looking for someone who understands the fundamentals of production operations, is mechanically inclined, and is excited about continuing to develop their technical skills. You must be comfortable following Standard Operating Procedures (SOPs), working with processing equipment, maintaining accurate production records, and following established safety protocols. Experience working with solvents, liquid processing systems, or laboratory equipment is highly desirable. Familiarity with California cannabis compliance requirements and inventory tracking systems is a plus, but not required. Our Client is building a collaborative, safety-focused environment where performance, continuous improvement, and a willingness to learn are valued. You'll work directly with an experienced Lab Manager who will provide hands-on training and guidance. The ideal candidate is dependable, detail-oriented, proactive, and able to work independently as their skills develop. This position requires the ability to remain active throughout the workday, including standing, walking, and performing repetitive production tasks. You should also be comfortable handling and moving production materials and equipment, with or without reasonable accommodation. If you're mechanically inclined, enjoy hands-on technical work, and are excited about helping a growing cannabis extraction operation succeed, this could be an excellent opportunity for you. Qualifications: Previous experience in cannabis extraction, laboratory processing, or a related manufacturing environment preferred. Familiarity with ethanol extraction, distillation, filtration, or solvent recovery processes highly desirable. Mechanical aptitude and ability to learn to operate specialized extraction equipment. Ability to follow SOPs, maintain accurate records, and work safely around industrial processing equipment. Strong attention to detail, dependability, and willingness to learn. Must be at least 21 years of age in accordance with California cannabis regulations. Viridian Enterprises LLC is an Equal Opportunity Employer. Viridian does not discriminate on the basis of race, color, religion, national origin, gender, sexual orientation, gender identity, gender expression, age, veteran status, physical or mental disability, Marital status, genetic information, or any other status protected under federal, state, or local law. If you need assistance or an accommodation due to a disability, you may contact us at recruiting @ viridianstaffing.com

Job DescriptionJob Title: Quality Assurance Sr Technician Job ID: 37656921 Location: San Diego, CA 92121 Duration:12 months Pay Rate: $20.00 - $25.00/hr on W2Key Responsibilities • Perform first article, receiving, in-process, and final inspections., • Inspect machined/molded components against engineering drawings, GD&T, specifications, and external standards., • Use micrometers, calipers, thread gauges, Go/No-Go gauges, optical comparator, height/depth gauges, concentricity gauges, pull/torque testers, and programmable/custom inspection equipment., • Perform dimensional, visual, functional, and attribute inspections according to validation protocols and controlled inspection plans., • Generate and maintain First Article Reports (FAIR), Non-Conformance Reports (NCR), QA history logs, inspection records, and quality documentation., • Identify out-of-specification products and support containment, segregation, rework/reprocess, disposition, and scrap control., • Maintain product-on-hold/quality-hold status and traceability., • Record inspection data accurately and maintain complete objective evidence and traceable records., • Verify inspection equipment calibration/verification status before use., • Work with Manufacturing, Materials, Engineering, and Quality teams to reduce defects and rejections., • Prepare daily quality reports and perform basic MS Office/Excel/Word/Outlook data entry and documentation.Required Qualifications, • High School Diploma/GED, • 3+ years of applicable quality inspection experience, • Strong ability to read engineering drawings and GD&T, • Hands-on experience with dimensional inspection equipment., • Experience with first article, receiving, in-process, and final inspection., • Ability to accurately document inspection results and identify nonconformances., • Understanding of calibration, measurement equipment, traceability, and product segregation.

Job Description Packaging Technician (Temp - Biotech) - Simply Biotech OVERVIEW Are you looking for a new career opportunity with an exciting biotech company?! Then we have got the right team for you! In this role, you are responsible for the duties listed below. Immediate openings for Packaging Technician (Temp - Biotech) in San Diego, CA who possess: • Experience working in a biotech, pharmaceutical, laboratory, production, inspection, or related manufacturing environment, • Experience completing paperwork and maintaining accurate records, • Strong attention to detail and ability to verify labels, quantities, lot numbers, and other product information, • Ability to follow written instructions and complete production documentation accurately, • Exposure to batch records, production logs, packaging records, or similar documentation preferred FULL DESCRIPTION: We are seeking four dependable Manufacturing Technicians to support the final stages of pharmaceutical drug product manufacturing for a growing biotech and pharmaceutical manufacturing company in San Diego, CA. This approximately 3+ month temporary assignment will focus primarily on product packaging, labeling, visual inspection, documentation, and general manufacturing support. The ideal candidate will be detail-oriented, reliable, comfortable following written procedures, and able to maintain accurate records within a regulated manufacturing environment. Direct pharmaceutical packaging or prior GMP experience is preferred, but not required. The selected candidate will be responsible for: • Supporting final-stage pharmaceutical manufacturing and packaging activities, • Performing final product assembly as assigned, • Packaging pharmaceutical products according to approved procedures and specifications, • Labeling finished pharmaceutical products, • Boxing and preparing finished products, • Completing batch records accurately and legibly, • Completing packaging records and production logs, • Completing required quality-check documentation, • Maintaining accurate and timely manufacturing records, • Following applicable cGMP documentation and data-integrity requirements, • Performing visual inspection of finished pharmaceutical products, • Inspecting products for particulate matter, • Identifying cosmetic flaws or structural damage, • Verifying product labels for accuracy, • Verifying packaging components, • Verifying lot numbers, quantities, and other required product information, • Ensuring packaging activities are completed according to approved specifications, • Operating packaging and labeling equipment according to established procedures, • Assisting with setup of packaging and labeling equipment, • Identifying and reporting equipment malfunctions or abnormalities, • Following approved Standard Operating Procedures and work instructions, • Following established quality standards and safety requirements, • Reporting discrepancies, errors, or potential quality concerns promptly, • Maintaining a clean and organized work area, • Handling manufacturing materials and waste according to applicable safety and manufacturing requirements, • Working collaboratively with Manufacturing and Quality personnel, • Supporting production schedules and project deadlines, • Performing other manufacturing, packaging, inspection, and production duties as assigned The selected candidate will also possess: • Experience within a biotech, pharmaceutical, laboratory, production, inspection, or related manufacturing environment preferred, • 1 to 2 years of relevant pharmaceutical manufacturing, packaging, production, inspection, or similar experience preferred, but not required, • Experience completing detailed paperwork and maintaining accurate records required, • Exposure to batch records, production logs, packaging records, or similar manufacturing documentation preferred, • Direct pharmaceutical packaging experience preferred, but not required, • Prior GMP experience preferred, but not required, • Associate degree in a scientific field or equivalent education preferred, • Recent science graduates with relevant laboratory, biotech, or manufacturing exposure may be considered, • Entry-level laboratory or manufacturing technicians with strong documentation skills may be considered, • Ability to read, understand, and follow written work instructions required, • Ability to communicate effectively in English and complete production documentation accurately, • Strong attention to detail required, • Strong commitment to accuracy when handling products, verifying information, and completing records, • Ability to follow established procedures consistently, • Basic math skills required, • Ability to accurately verify quantities, lot numbers, labels, and other production information, • Good organizational skills required, • Ability to perform repetitive tasks while maintaining consistent quality, • Dependable and punctual attendance required, • Ability to work independently and as part of a team, • Willingness to learn new procedures and equipment, • Ability to respond constructively to feedback and training, • Commitment to maintaining a clean, safe, and compliant manufacturing environment, • Ability to work onsite in San Diego, CA, • Ability to work Monday through Friday from 8:00 AM to 5:00 PM, • Ability to support an approximately 3+ month temporary assignment Physical Requirements: • Ability to sit and/or stand for extended periods while performing packaging, labeling, inspection, documentation, and manufacturing activities, • Must have 20/20 vision, with or without corrective lenses, • Ability to differentiate colors, • Ability to visually inspect pharmaceutical products for particulate matter, cosmetic defects, structural damage, labeling accuracy, and packaging quality, • Ability to visually verify labels, lot numbers, quantities, packaging components, and other product information, • Ability to use hands and fingers for labeling, packaging, product handling, documentation, and operation of basic packaging equipment, • Ability to bend, reach, grasp, and perform repetitive hand and arm movements throughout the workday, • Ability to move throughout manufacturing and packaging areas as needed, • Ability to handle pharmaceutical products, packaging materials, boxes, labels, and related production materials, • Ability to work around packaging, labeling, and manufacturing equipment, • Ability to wear required PPE and follow applicable manufacturing, quality, cGMP, and safety procedures, • Ability to maintain focus, accuracy, and attention to detail while performing repetitive packaging, inspection, and documentation activities Salary Range: $20 to $22/hour More information can be found at www.simplybiotech.com. \nCompany Description Simply Biotech was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2025, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, Simply Biotech is expanding to new markets and hiring additional staff in existing offices. Simply Biotech was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2025, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, Simply Biotech is expanding to new markets and hiring additional staff in existing offices.

Job Description Introduction to Fuse: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a Technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Fuse is looking for a dynamic, detail-oriented Quality Engineer to join our energetic and growing team! This is an opportunity to work closely with Quality Management providing reliable reports and process improvement recommendations to monitor and improve overall product quality. In this role, you will support the company’s full business quality management system and production team. Fuse is an innovative, design-driven environment that delivers elegant engineering solutions. Must be a nimble self-starter who is excited about technology and has the ability to think out of the box and suggest powerful new ideas. Fuse values a creative and dynamic work environment – if this sounds good to you, then we are looking forward to hearing from you! What you'll do: • Provide daily quality engineering support to production and manufacturing teams, resolving quality issues and minimizing disruption to production schedules., • Monitor production processes to ensure products meet engineering specifications, drawings, work instructions, and quality requirements., • Investigate and disposition production nonconformances, defects, and material issues, including containment and root cause analysis., • Support Material Review Board (MRB) activities and coordinate disposition of nonconforming material., • Support supplier quality issues, including supplier rejections, incoming material nonconformances, SCARs, and supplier corrective actions., • Support implementation of inspection plans, control plans, process controls, and sampling plans., • Assist with process audits, product audits, and internal QMS audits, including identification and closure of audit findings., • Ensure production quality records are accurate, complete, traceable, and maintained in accordance with QMS and AS9100/ISO requirements., • Escalate significant quality issues and provide leadership with clear communication regarding production impact, containment status, root cause, and corrective-action progress. Requirements We are looking for: • Bachelor’s Degree or High school diploma with relevant experience., • 3-5 years experience as a Quality Engineer or Technician in an assembly environment, • Solid judgment to proactively identify and solve complex problems, • Hands on experience with reading engineering drawings and interpreting technical information to include GD&T tolerancing, • Experience with collecting data for generating quality reports, • Strong attention to detail, good organizational skills, and the ability to prioritize in changing situations, • Excellent collaboration and communication skills across departments and with supervisors and managers, • Active secret clearance or ability to obtain a clearance, • US Citizen Your own unique talents! If you meet some requirements of this position but not 100% of the qualifications outlined above, tell us why you’d be a great fit for this role based on your specific characteristics that align with our values and goals Nice to have: • Understanding of electronic circuitry, • Experience with Microsoft Dynamics ERP, • ASQ Certification (Engineer or Auditor), • Experience with ISO 9001 and AS9100 Salary Range: $85,000 - $105,000 More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements - providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description Position Summary We are seeking a Manufacturing Packaging Technician to support laboratory-based production operations involving the filling, inspection, labelling, and packaging of biological reagents and research products. This role is focused on manufacturing and laboratory production not warehouse shipping or logistics. The ideal candidate will have experience working with laboratory equipment, strong attention to detail, and the ability to follow GMP documentation and quality procedures. Key Responsibilities • Perform laboratory-based filling and dispensing of liquid biological reagents into customer vials and containers., • Operate laboratory equipment including pipettes, peristaltic pumps, analytical balances, and other packaging instruments., • Prepare, organize, and stage production materials, including vials, bottles, labels, caps, buffers, and associated documentation., • Execute packaging operations such as bottling, capping, labeling, bagging, and kit assembly according to established procedures., • Verify production materials and documentation before processing in accordance with quality requirements., • Accurately record production activities and packaging data within SAP or other manufacturing systems., • Support inventory management by receiving, storing, retrieving, and staging production supplies., • Maintain accurate manufacturing records, batch documentation, inventory counts, and device history records., • Perform visual inspection of packaging components and finished products to ensure compliance with quality standards., • Assist with production scheduling priorities while meeting daily, weekly, and monthly manufacturing goals., • Follow Standard Operating Procedures (SOPs), GMP guidelines, and Good Documentation Practices (GDP)., • Maintain clean workstations and perform routine cleaning of packaging equipment and laboratory work areas., • Participate in safety meetings, audits, and Environmental Health & Safety (EH&S) initiatives., • Properly wear required PPE and follow contamination control and hazardous waste handling procedures., • Perform additional production-related duties as assigned. Required Skills & Experience • Minimum 6 months of experience in laboratory, pharmaceutical, biotechnology, medical device, or manufacturing environments., • Hands-on experience using laboratory equipment such as:, • Pipettes, • Peristaltic Pumps, • Analytical Balances, • Electronic and Manual Dispensing Equipment, • Experience with liquid filling, dispensing, bottling, labeling, or packaging operations., • Knowledge of metric measurements and basic mathematical calculations, including concentration and fill-volume calculations., • Familiarity with SAP, ERP systems, or electronic manufacturing documentation preferred., • Strong attention to detail and organizational skills., • Ability to follow written procedures and work independently with minimal supervision., • Comfortable standing for extended periods and lifting up to 30 pounds with assistance when necessary., • Experience working in GMP, ISO, FDA-regulated, or controlled laboratory/manufacturing environments is preferred. Qualifications • High School Diploma or GED required., • Minimum 6 months of relevant manufacturing or laboratory production experience., • Strong documentation and recordkeeping skills., • Basic computer proficiency (Microsoft Office and manufacturing software)., • Ability to work flexible schedules, rotating shifts, overtime, and weekends as needed., • Strong communication and teamwork skills., • Ability to perform basic mathematical calculations accurately.

Job Description Position Summary The Repair Technician III – Modular Systems plays a critical role in diagnosing, troubleshooting, testing, and repairing returned industrial, medical, avionics, and embedded computing products. Unlike traditional IT or data center repair roles, this position focuses on modular electronic assemblies, industrial control systems, and specialized customer equipment used in demanding operational environments. This role supports a best-in-class customer experience by ensuring accurate diagnosis, repair, testing, and documentation while meeting department turnaround objectives. The technician will work within a structured repair process utilizing proprietary test equipment, standardized work instructions, and quality systems to restore customer equipment to operational status. Key Responsibilities System Diagnostics & Repair • Diagnose, troubleshoot, test, and repair modular industrial, medical, avionics, and embedded computing systems., • Perform subassembly remove-and-replace repairs using documented work instructions, repair procedures, schematics, and fault trees., • Utilize proprietary automated test equipment to verify system functionality and identify failures., • Conduct visual inspections, cleaning procedures, leak testing, ground isolation testing, and final acceptance testing., • Execute system upgrades, modifications, and repair activities according to approved work instructions and Special Repair Instructions (SRI). Quality, Documentation & Continuous Improvement • Follow ISO-compliant procedures, standard operating procedures, and department quality requirements., • Maintain accurate repair records, test results, failure analysis information, and inventory transactions within company systems., • Support root cause investigations and corrective action activities when required., • Contribute to continuous improvement initiatives focused on quality, speed, throughput, and customer satisfaction. Collaboration & Technical Support • Partner with Engineering and RMA Product Support teams to resolve complex or intermittent failures., • Escalate advanced troubleshooting issues when component-level diagnostics or engineering analysis is required., • Communicate effectively with internal teams regarding repair status, technical findings, and quality concerns. Qualifications Education & Experience • Associate Degree in Electronics, Electrical Technology, Computer Technology, Avionics, or equivalent military/technical training., • Minimum 5 years of hands-on troubleshooting, testing, repair, or maintenance experience involving electronic systems, industrial equipment, avionics, embedded systems, or modular assemblies., • Familiarity with Lean Manufacturing, Lean Six Sigma, Kaizen, or continuous improvement methodologies is preferred. Technical Skills • Experience troubleshooting and repairing electronic, electromechanical, industrial, medical, avionics, or embedded systems., • Ability to interpret technical documentation, work instructions, schematics, and fault trees., • Experience utilizing electronic test equipment such as multimeters, oscilloscopes, insulation testers, and automated test systems.

Job Description Position Overview The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician B will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive general instructions on work, applying job skills and company policies and procedures to complete a variety of tasks, and working on assignments that are semi-routine in nature where ability to recognize deviation from accepted practice is required. The Calibration Technician B will perform laboratory housekeeping and may be asked to report opinions and interpretations. Responsibilities and Duties 1. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines – Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications, 2. Maintain secondary and/or working calibration standards, 3. Perform basic maintenance, troubleshooting and repair of precision equipment, 4. Collect, compile, measure, summarize, and record data gathered during calibration, 5. Identify out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc., 6. Identify and correct measurement errors, as applicable, 7. Prepare calibration reports and certificates, 8. Adapt existing calibration equipment, standards, and techniques to accomplish unique measurement tasks for which they are not principally used, 9. Train subordinates in calibration concepts and procedures, 10. Interact with other technicians, Customer Service Representatives, Account Managers, and customers, 11. Other duties and responsibilities as may be assigned Qualifications • Minimum High School diploma or equivalent, • Must be able to perform general math and algebra functions, • Must possess good written and oral, communication skills, • Basic ability to troubleshoot repair, align and optimize precision equipment, • Basic computer skills, • Proficient in use of MS Word and Excel, • Minimum one year of calibration experience some of which can be offset by formal metrology training, • Must have very good interpersonal and customer service skills, • Strong attention to details, • Must be a self motivator, work as a team player, and follow written procedures Physical Demands • Must be able to lift up to 45 pounds without assistance, • Occasional standing and bending are required Working Environment • Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites, • Travel may be required to other domestic and possibly international locations What We Offer Full-time, exempt position, sign on bonus eligible Excellent benefits package Employer paid medical, dental, vision, disability, life insurance, retirement plan, employee funded pre-tax health, childcare spending accounts and tuition reimbursement Paid time off with vacation, sick and holiday leave SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. About Us SIMCO Electronics is the leading provider of calibration and software services for test and measurement instruments used in technology organizations. To learn more about SIMCO Electronics please site our home page at: https://www.simco.com/. For the second year in a row, SIMCO has been named #1 on a list of "The Best Places to Work" in the Bay Area by the Silicon Valley Business Journal and San Francisco Business Times.

Job Description A company in San Diegos Cell Engineering team at San Diego is looking for an Engineering Technician to lead cell prototype assembly builds and ensure quality metrics. You will partner with Engineering, Quality, and Materials to lead front-end clear-to-builds (CTBs) through electrolyte filling, with close collaboration at formation. Moreover, support equipment installation and SOP development, as well as participate in cell assembly troubleshooting and failure root cause analysis. Join us and lead cell prototype assembly for the future of battery technologies. What You’ll Do • Lead a team of engineering technicians through daily cell prototype assembly builds - assign work, balance labor, coach in real time on build sequence, quality checks, 5S, and problem-solving, and hold the team to schedule, • Own shift-level safety, quality, and throughput — stop work when conditions are unsafe or out of standard and document incidents promptly, • Execute established processes and standard workflows, escalating gaps in process, parts, or equipment rather than inventing unapproved workarounds, • Support Engineering by capturing build issues, feeding back process observations, validating work instructions, and implementing engineering changes, new equipment, and updated work instructions, • Track and communicate shift KPIs (safety, first-pass yield, units vs. plan, downtime), • Support timely failure analysis and root cause identification to resolve assembly issues, • Uphold and improve quality assurance, such as incoming inspection of parts or outgoing inspection of cells, • Track inventory, such as cell components, consumables, and lab supplies, • Collaborate with engineers and cross-functional teams What You’ll Bring • Engineering degree in Science or Engineering, or equivalent experience, • 2+ years of manufacturing, operations, or production leadership, or equivalent hands-on leadership of hourly technical teams, with proven ability to assign daily work, coach on process, and hold a team accountable to safety, quality, and output, • Comfortable operating in a changing prototype cell assembly environment where product, process, and work instructions iterate frequently, • Working knowledge of standard manufacturing practices including 5S, standard work, layered audits, and basic problem-solving (5-Why / Pareto), • Ability to follow work instructions, interpret quality data, and communicate issues clearly to Engineering and peers, • Strong floor presence and bias for action, spending the shift on the line with the team, • Flexibility to work the shifts required by schedules, including nights, weekends, and off-shift coverage, • Experience in automotive, electronics, battery, or high-mix prototype manufacturing, • Self-driven, independent problem-solver capable of working with minimal guidance, • Physical requirements, such as lifting items up to 25 pounds, standing for long shifts, and dry room/PPE such as the capability to wear a respirator are required

Job Description Adecco is currently assisting a leading local electronics manufacturer in recruiting for an Electronics Test Technician in El Cajon, CA. What's in It for You? Starting pay of $23-$25 per hour Overtime opportunities available Weekly pay 9/80 work schedule for improved work-life balance Potential transition to 2nd shift Medical, dental, vision, and 401(k) benefits Referral bonus opportunities Temp-to-hire career path Key Responsibilities Perform testing and verification of electronic assemblies and components. Operate electronic test equipment to ensure products meet performance and quality standards. Accurately record and document test results. Assist with troubleshooting, diagnostics, and product verification activities. Read and interpret basic schematics, assembly drawings, and test documentation. Utilize electronic test equipment including multimeters, oscilloscopes, and power supplies. Maintain a clean, safe, and organized work environment. Collaborate with team members to meet production and quality goals. Lift and move test equipment weighing up to 50 lbs., with assistance when required. Qualifications High School Diploma or GED with 4+ years of relevant electronics, manufacturing, or testing experience; OR Associate's Degree or Technical Certificate in Electronics Technology with 0-2 years of related experience; OR Equivalent military electronics training and experience. Ability to read basic electrical schematics and technical documentation. Experience using electronic test equipment is a plus. Strong attention to detail and commitment to quality. Apply Today! Ready to take the next step in your electronics career? Click Apply Now for immediate consideration and join a growing team where your technical skills can make an impact. Pay Details: $23.00 to $25.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Mechanical Engineering Technician Industry: Construction Equipment / Mechanical Engineering / Industrial Machinery Position Overview Our client is an established specialty construction and engineering company seeking a talented and hands-on Mechanical Engineering Technician to join its team. This position offers an opportunity to work with specialized construction equipment, mechanical systems, and industrial machinery while contributing to equipment innovation, reliability, and operational performance. The ideal candidate combines strong mechanical engineering fundamentals with practical troubleshooting and equipment development experience. This individual will be responsible for designing, developing, testing, diagnosing, and improving mechanical, hydraulic, and electrical systems used in construction operations. The role involves collaboration with engineering, maintenance, and field operations teams to develop new equipment, optimize existing machinery, and resolve complex technical challenges. Key Responsibilities Mechanical Design & Equipment Development Design, develop, and improve mechanical, hydraulic, and electrical systems and components using CAD software such as SolidWorks and AutoCAD. Prepare engineering calculations, technical drawings, specifications, sketches, and fabrication documentation. Perform engineering analysis, including Finite Element Analysis (FEA), to evaluate equipment performance and reliability. Develop prototypes and conduct testing to validate new equipment designs and mechanical improvements. Evaluate pumps, motors, valves, cylinders, hydraulic systems, and electrical controls for functionality, safety, and efficiency. Collaborate with cross-functional teams to integrate mechanical, electrical, and hydraulic components into specialized equipment and machinery. Apply knowledge of mechanics of materials, hydraulics, electronics, engines, motors, PLCs, and control systems to solve technical challenges. Prepare equipment documentation, operating manuals, maintenance procedures, and assembly instructions. Assist with estimating material, labor, fabrication, installation, and testing costs. Field Operations & Technical Support Provide technical troubleshooting and hands-on support to field operations teams. Work closely with equipment operators to identify performance issues and recommend corrective actions. Assist with equipment setup, calibration, testing, and commissioning at project sites. Evaluate equipment performance and implement improvements to enhance productivity, reliability, and safety. Diagnose mechanical, electrical, and hydraulic problems in operating equipment. Travel to construction project sites as needed to support specialized machinery and equipment. Equipment Maintenance & Reliability Collaborate with maintenance personnel and equipment suppliers to support equipment repairs and improvements. Develop and recommend preventative maintenance schedules for machinery and mechanical systems. Conduct equipment inspections and performance evaluations to identify potential failures. Troubleshoot hydraulic pumps, motors, valves, cylinders, electrical controls, and related mechanical components. Recommend repairs, replacements, or design modifications to improve equipment reliability. Conduct operational testing of machinery and individual components to identify deficiencies and validate improvements. Analyze test results and develop practical solutions to recurring mechanical and equipment issues. Support equipment lifecycle improvements and maintenance efficiency. Qualifications & Requirements Bachelor's degree in Mechanical Engineering or Industrial Engineering required. Minimum 2 years of experience in mechanical engineering, mechanical equipment design, engineering technician work, or a related technical position. Working knowledge of hydraulic systems, mechanical components, electrical controls, and PLC systems. Hands-on experience troubleshooting hydraulic pumps, motors, valves, cylinders, and control systems. Ability to read and interpret electrical wiring diagrams, mechanical drawings, and technical specifications. Familiarity with SolidWorks, AutoCAD, or similar CAD software. Understanding of mechanical design principles, equipment testing, and troubleshooting methodologies. Knowledge of PLC-controlled machinery and electrical charging systems. Strong analytical, diagnostic, and problem-solving skills. Ability to work independently and collaborate with engineering, maintenance, and field operations teams. Strong organizational and communication skills. Willingness and ability to travel to project sites as needed. Compensation & Benefits Our client offers a comprehensive compensation and benefits package designed to support employees' professional development, financial security, and work-life balance. Compensation & Retirement Competitive base compensation Eligibility for annual performance-based incentive bonuses 401(k) retirement plan with a 100% employer match on the first 6% of employee contributions, plus an additional 3% Safe Harbor employer contribution Health & Insurance Medical insurance effective on the date of hire, with employer contributions covering approximately 80%85% of premiums depending on plan selection Dental insurance effective on the date of hire, with approximately 75% of premiums covered by the employer Voluntary vision coverage Flexible Spending Accounts (FSA) for eligible healthcare and dependent-care expenses Company-paid life insurance, accidental death and dismemberment coverage, and long-term disability insurance Paid Time Off & Work-Life Balance Paid time off beginning at 16 days annually, increasing with tenure 9 paid company holidays Half-day Fridays during the summer months between July 4 and Labor Day Paid parental leave for eligible employees Employee Assistance Program (EAP) Professional Development & Additional Benefits Tuition reimbursement Gym reimbursement Employee referral incentive program Professional development and career advancement opportunities Internal mobility and long-term career growth Ideal Candidate Profile The ideal candidate is a mechanically inclined engineering professional who enjoys both equipment design and hands-on troubleshooting. They are comfortable working with hydraulic machinery, electrical controls, mechanical assemblies, and industrial equipment. Candidates with backgrounds in mechanical equipment design, industrial machinery, construction equipment engineering, hydraulic systems, manufacturing equipment, or mechanical engineering technology may be particularly well suited for this opportunity. This position is especially attractive to individuals who enjoy taking ownership of equipment performance, developing practical engineering solutions, and working directly with field personnel to improve machinery reliability and efficiency. Employment Type: Full time Location: San Diego, CA

Job Description About Tempo Based in San Diego, California, Tempo develops thermochemical energy storage (TCES) systems designed for energy-intensive industries. The platform enables industrial operators to shift energy use over time by sourcing power when it is most cost-effective and enables the electrification of high-temperature industrial heat at a cost advantage to using fossil fuels. By storing electricity thermochemically, the system delivers a continuous stream of combustion-free, high-temperature air at up to 1,200°ree;C. Tempo is backed by leading climate and energy investors, including Breakthrough Energy Ventures, Khosla Ventures, and Prelude Ventures. For more information, visit www.tempoenergy.com. Job Description Tempo is seeking a highly motivated and skilled Engineering Technician with strong welding capabilities to produce engineered parts and assemble testing apparatus, instruments, sensors, prototypes, and power electronic components. The ideal candidate is a driven professional who has recently graduated from a strong technical program, has 2–4 years of hands-on experience, and is eager to bring their energy and foundational skills to a fast-paced startup environment. You will work both independently and collaboratively to bring our engineering designs to life. This role is integral to the development and refinement of high-temperature energy storage components, offering an incredible opportunity to work on complex R&D projects and grow your career at the cutting edge of thermochemical energy storage technology. Key Responsibilities • Interpret 3D CAD models, 2D drawings, and spec charts to plan and execute part manufacturing; measure, mark, and cut raw materials accordingly, • Perform TIG/MIG welding on structural assemblies and operate machine shop equipment (mills, lathes, drill presses, band saws) to create or modify parts, • Assist in assembling complex mechanical and electromechanical systems as required, • Prepare finished components for dimensional accuracy, weld integrity, and defects for inspection, • Modify and repair parts, prototypes, and test rigs to support agile R&D needs using welding, grinding, cutting, and machining techniques, • Work with high-temperature and specialty materials (refractory metals, ceramics, alloys) to meet durability and performance requirements for thermochemical applications, • Partner with engineers to interpret technical drawings, troubleshoot fabrication challenges, and recommend design improvements for manufacturability, • Inspect fabricated and welded components for structural integrity, finish, and dimensional accuracy to ensure parts meet required tolerances, • Maintain welding gear and machine tools in optimal working condition; follow all safety protocols when welding, handling high-temperature materials, and operating machinery, • Record prototype builds, assembly procedures, fabrication parameters, and component modifications, providing real-time feedback to engineering and R&D teams Qualifications Required: • Associate degree in Mechanical Engineering Technology, formal welding certification, or completion of a technical/trade school program, • 2–4 years of hands-on experience in mechanical fabrication, welding, and assembly; experience in an R&D or startup environment a plus, • Proficiency in TIG and MIG welding on various metals, • Exceptional safety acumen and commitment to safe work practices, • Familiarity with manual mills, lathes, grinders, and general metalworking tools, • Ability to read and interpret engineering drawings, blueprints, and technical specifications, • Strong willingness to learn about high-temperature and specialty materials (ceramics, alloys, refractory metals), • Exceptional attention to detail with the ability to work to tight tolerances, • Proactive learner with the ability to assist in troubleshooting basic fabrication challenges., • Clear communicator able to collaborate effectively with engineers and team members in a fast-paced R&D environment, • Genuine interest in learning and growing within an R&D or startup environment; comfortable wearing multiple hats to get the job done Preferred: • Experience in high-temperature applications, thermal systems, or energy storage, • Knowledge of materials science, particularly around fabrication and welding of heat-resistant materials, • Familiarity with safety standards and best practices in fabrication and high-temperature R&D settings Compensation Range The US base hourly salary range for this full-time position is $24.27 to $30.76 + equity + benefits. Our salary ranges are determined by role, level, and location. Within the range, individual pay is determined by additional factors, including job-related skills, experience, location, and relevant education or training. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include equity or benefits. Physical Demands • Sitting and standing: Extended periods at a desk performing computer-based design, simulation, and documentation work, balanced with time at a lab bench or in the shop during hardware build and testing, • Lifting and carrying : Lift and carry equipment, test fixtures, or hardware assemblies up to 50 lbs.; heavier items handled with mechanical assistance or team lift, • Hand dexterity: Frequent use of hands for assembly, fabrication, instrumentation hookup, and operation of test and shop equipment, • Visual acuity: Ability to read engineering drawings, inspect hardware, and identify dimensional and surface quality features during fabrication and testing, • PPE compliance: Ability to wear and work effectively in required personal protective equipment, including safety glasses, heat-resistant gloves, safety shoes, and other appropriate gear in high-temperature lab and shop environments, • Safety acumen: Demonstrated understanding of lab and shop safety protocols, including hazard recognition and risk mitigation in environments involving high-temperature equipment, energized systems, and fabrication machinery, • Travel: Occasional travel (estimated <5%) for tool or material pickup Working at Tempo Tempo is a lean organization working on exciting challenges, and the people who thrive here share a few things in common beyond their technical skills. • Clear, direct communication: You professionally say what you mean, lead with empathy, use tact, ask when you're unsure, and keep the people around you informed without being asked. At a company our size, communication gaps are expensive, and good communicators add to success and efficiency!, • Low-ego helpfulness: You're willing to jump in on work that isn't strictly yours, whether that's helping a teammate debug something, lending a hand in the shop, or flagging an issue you noticed outside your lane. No one here succeeds in a silo., • Intellectual curiosity: You're genuinely interested in how things work, not just your piece of it, but the broader system. Tempo sits at the intersection of chemistry, mechanical engineering, power electronics, and software; the more you understand about the whole, the more valuable you become., • Business awareness: You understand that your work exists in a business context. You think about cost, timeline, and tradeoffs—not just technical elegance—and you make decisions accordingly., • Comfort with ambiguity: Processes here are still being built. You can make progress without a perfect playbook, and you know when to ask for direction versus when to use your judgment and move forward., • Accountability: You own your outcomes, including the misses. When something goes sideways, the instinct here is to fix it and learn from it, not to explain why it wasn't your fault. This job description is intended to provide a general overview of the position and is not an exhaustive list of duties, responsibilities, or qualifications. Tempo reserves the right to modify, add, or remove responsibilities as business needs evolve. Employees may be asked to perform duties outside of those listed above from time to time. Tempo is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable law. We are committed to building a diverse and inclusive team and encourage candidates from all backgrounds to apply. Tempo participates in E-Verify. Employment is contingent upon successful completion of a background check including employment and education check. California Privacy Notice (CCPA) - In connection with your application, Tempo collects personal information that you voluntarily provide, such as your name, contact information, employment history, and other information relevant to your candidacy. This information is collected and used solely for the purpose of evaluating your application and administering the hiring process. Tempo does not sell applicants' personal information. For more information about your rights under the California Consumer Privacy Act (CCPA), please contact HR. Tempo does not accept unsolicited resumes or candidate profiles from external recruiters, staffing agencies, or third-party search firms. Submission of unsolicited resumes by any external agency — whether to a Tempo employee, hiring manager, or any other representative — does not constitute or imply an agreement for placement fees, and Tempo will not be responsible for any fees related to unsolicited submissions under any circumstances. Any candidate submitted without a prior, fully executed, written fee agreement between the agency and Tempo's Human Resources department will be deemed the sole property of Tempo. Tempo reserves the right to pursue and hire such candidates without obligation to the submitting agency.

Job Description Desired Bill Rate is *-57.81- Please do not submit candidates over this bill rate* Major Aerospace Company is looking for an Electronic Technician 3 to support our Avionics Development Center. As a member of the Avionics Development Center you'll get to support critical fabrication and testing efforts in both a production and development environment. This position will serve on-site at our facility in Rancho Bernardo, CA. Responsibilities Assemble, install, test, and maintain electronic systems, components, and equipment. Diagnose and repair circuit boards, wiring, and other electronic components. Perform operational tests at environmental stress screening, vibration, and thermal levels to ensure compliance with design specifications. Identify and isolate malfunctions down to the component level. Conduct defined engineering tests and collect assigned data. Document test results, repairs, and maintenance activities accurately. Perform diagnostics and root cause analysis using oscilloscopes, multimeters, RF generators, and spectrum analyzers. Maintain compliance with all NGC CAT 2 Foreign Object Elimination (FOE) and Foreign Object Damage (FOD) safety, quality, and Electrostatic Discharge (ESD) standards. Basic Qualifications for Electronic Technician 3 4 years of related experience or electronics training equivalent to 2 years of technical trade school or military technical school, Experience troubleshooting analog and digital circuits. Preferred Qualifications for Electronic Technician 3 Familiarity with RF systems, digital/analog circuits, or embedded electronics. Experience with Component-level troubleshooting Experience with VOM, DVM, and similar test apparatus. IPC-A-610 Class III Surface Mount. Shift: ['Able to read drawings / wiring diagrams, previous government experience, experience with ESD (electrostatic discharge) and FOD (foreign object damage) control. Previous experience working in a manufacturing environment.', 'Avionics Troubleshooting', 'Blueprint Reading', 'Component-Level Troubleshooting', 'Digital Multimeters', 'Electrical Schematics', 'Electrical Testing', 'Oscilloscopes', 'Test Equipment'] Start: ['• Ability to read and interpret production specifications, production diagrams, assembly drawings, and technical specifications (English) • Able to read drawings / wiring diagrams • Cable Assembly • Cable Harness Assembly • Electrical Soldering • Micro-Soldering • Solder Certified', 'Circuit Card Assemblies', '• Current certification to IPC WHMA-A-620, NASA-J-STD; or other certifications in electronics assembly and workmanship.', 'Root Cause Analysis (RCA)', 'Wire Harness Assembly']

Job Description About Us: We are a leading electronics manufacturer dedicated to innovation and excellence. Our facility utilizes state-of-the-art SMT equipment, and we are looking for a skilled technician to keep our operations running smoothly. Responsibilities: Maintain and troubleshoot high-speed SMT equipment, including pick-and-place machines ( Mydata, MyCronic, Vitronic…), reflow ovens, screen printers, and Automated Optical Inspection (AOI) systems. Perform preventive maintenance (PM) and calibration on SMT machinery according to established schedules and procedures. Diagnose and repair equipment for malfunctions, minimizing downtime and ensuring maximum line efficiency. Monitor SMT line performance, identify root causes of defects (e.g., solder bridging, tombstoning, misalignments), and implement corrective actions. Train production operators on equipment use and proper maintenance procedures. Qualifications: Minimum 3+ years of experience as an SMT Technician or Equipment Maintenance Technician in a high-volume manufacturing setting. Strong theoretical and practical knowledge of SMT process principles (stencil printing, component placement, reflow soldering). Demonstrated proficiency in troubleshooting complex electromechanical systems using schematics and diagnostic tools. Familiarity with quality standards (e.g., IPC-A-610). Excellent communication skills and the ability to work effectively as part of a technical team.

Job Description Job Title: Bottling Technician I Location: San Diego, CA Hours: Monday - Friday : 9:00 AM - 5:30 PM Pay: $19.50 per hour Summary: This role will be responsible for processing product formulations, dispensing antibody products, capping, labeling, kitting and completing batch records, and putting away Finished Good Inventory (FGI). This is a highly team oriented group which involves working closely with other core teams within the Bottling Department as well as other departments such as Planning, Receiving, Inventory Control, Custom Solution Team (CST), Packaging and Quality Control groups. Responsibilities • Assist in performing various bottling related tasks to include dispensing antibody solutions, capping and labeling of vials, tubes or bottles, and assembly of kits, • Formulate products per approved Standard Operating Procedures (SOPs) and work instructions including multi-component cocktail formulations, • Verify formulation worksheets to ensure that information such as concentrations, lot numbers etc. are correct, • Put away finished goods products according to their designated temperature conditions, • Use computer programs such as Microsoft Excel, • Set-up and prepare equipment for ongoing operations, • Operate computer-controlled process support/process equipment (i.e., filling line, lyophilizer, capping, labeling machine, etc.), • Follow instructions for completion of job tasks, • Adhere to correct procedures, policies and health/safety guidelines, • Clean and maintain work area and all lab equipment and supplies, • May perform data entry and production documentation completion tasks, • Other projects or responsibilities as may be required. Minimum Qualifications – Education and Experience • 6 months of relevant experience in a laboratory and/or biotech manufacturing and/or filling/bottling/packaging working environment and/or BS in related field, • 6 months Experience in pipetting or dispensing liquid products

Job Description Join our fast-paced and collaborative team as a Senior Engineering Technician with a Focus on Optical Fiber Processes. In this hands-on role, you will support the development, optimization, and scaling of critical fiber-handling and integration processes that directly impact product performance, reliability, and manufacturability. You will work closely with the optical fiber process development engineers. This role is ideal for someone with strong practical experience in fiber preparation and integration who enjoys working at the intersection of R&D and manufacturing. Key Responsibilities: Support the development and execution of fiber-centric processes, including: • Precision fiber cleaving, stripping, and preparation (SM, PM, specialty fibers), • Fusion splicing (including low-loss and polarization-maintaining alignment), • Fiber end capping and handling for high-poser or sensitive applications, • Fiber cleaning, preparation, and contamination control practices, • Inspection and analysis of fiber end-faces and splice quality Support photonic assembly and integration: • Fiber-to-device coupling and alignment (active and passive), • Integration of fibers into packages (TO, butterfly, micro-optic assemblies), • Optics attach (lenses, isolators, fiber arrays) Process development & improvement: • Execute DOE to improve optical performance, yield, and repeatability, • Follow process flows, work instructions, and travelers, • Troubleshoot issues related to optical loss, fiber damage, and process variability, • Support transition of processes from development into pilot and early-stage production, • Support tooling, fixturing, and automation strategies for fiber handling Requirements • This position requires access to export-controlled information. Employment is contingent upon the applicant being a U.S. person as defined by 8 U.S.C. § 1324b(a)(3). Experience: • Associate’s degree or High School Diploma and Equivalent Experience in a pertinent environment, • 3+ years with demonstrated hands-on expertise with fiber processes in a production or R&D environment, • Hands-on experience with fiber handling and processing in a lab or manufacturing environment Core Skills: • Fiber cleaving, stripping, and preparation techniques across a range of fiber types, • Fusion splicing (including PM fiber alignment and loss optimization), • Fiber end capping and high-power handling considerations, • Fiber inspection methods (microscopy, interferometry, or equivalent), • Strong understanding of contamination control and cleaning methods, • Experience with fiber alignment and optical coupling, • Ability to work effectively in lab and cleanroom environments Preferred Skills: • Experience with high-power fiber or laser systems, • Strong documentation and communication skills, • Experience with active alignment systems, • Exposure to reliability testing (thermal cycling, HTOL, damp heat), • Train junior technicians or operators, • Lead build efforts for critical prototypes or customer deliverables, • Provide feedback into design for manufacturability (DFM), • Quantifying splice loss, return loss, PER (for PM fibers), • Use of optical test equipment (OSA, power meters) Basic data analysis (Excel, JMP) Benefits The anticipated hourly pay for this role ranges from $30.00 to $45.00. As a full-time employee, you will be eligible for Monarch’s comprehensive benefits package, which includes: • Medical, Dental, and Vision insurance, • Fidelity 401(k) plan with 4% employer matching, • 20 paid time off (PTO) days per year, • 13 paid company holidays, • 9/80 work schedule (every other Friday off) Monarch Quantum is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, citizenship status, national origin, ancestry, sex, sexual orientation, age, religion, creed, physical or mental disability, medical condition, marital status, veteran status or any other characteristics protected under applicable federal, state and local laws.

Job Description Research & Development Zirconia Technician The Research & Development Zirconia Technician assists in preparing materials, operating laboratory and production equipment, and documenting results in support of research and development testing in the zirconia production facility. The position performs all work in accordance with established procedures and Company safety, quality, and confidentiality requirements. About Us Argen is a family-owned and privately held company based in San Diego, CA with a state-of-the-art manufacturing center that provides high quality dental solutions to dental labs of all sizes. Founded as a precious metals company in South Africa, Argen has evolved into a dynamic, technology-based manufacturing organization focused on three key business segments, including dental alloys, zirconia, and digital dentistry solutions. Argen continues to invest in innovative product improvement initiatives through its Quality Management System to provide our global customers with affordable, high-performance products and industry-leading excellent service. Argen’s products are FDA regulated and ISO certified. Essential Duties & Responsibilities: • Participates in product development activities for new and existing manufacturing processes., • Prepares ceramic powder blends for research and development projects in accordance with established formulations and procedures., • Operates equipment used in research and development projects (e.g., mass scales, powder blenders, hydraulic presses) in accordance with operating instructions and safety procedures. Provides assistance to other members of the ceramics research and development team on manufacturing and process development activities., • Maintains accurate, complete, and contemporaneous records of project work in accordance with good documentation practices. Adheres to all Company safety policies and procedures, including proper use of required PPE., • Prepares test specimens and performs basic measurements, such as dimensions, weight, density, and shrinkage., • Supports property testing, such as flexural strength, translucency, and shade evaluation, as directed., • Compiles results on spreadsheets or summary report for R&D/Engineering review., • Promptly reports equipment malfunctions., • Identifies and reports deviations, nonconforming results, or unexpected outcomes., • Othe duties as assigned What does it take to be successful? • Associate of Science (AS) degree in engineering technology, chemistry, materials science, physics, or a related technical field, or an equivalent combination of education, training, and relevant experience., • Minimum of three (3) years of hands-on experience in a research and development, laboratory, or technical manufacturing environment., • Working knowledge of basic math, including weights, ratios, percentages, and metric units., • Familiarity with laboratory or production equipment preferred., • Demonstrated accuracy and attention to detail in performing measurements, following procedures, and maintaining documentation., • Effective written and verbal communication skills, including the ability to clearly document work and report results., • Proficiency in Microsoft Office applications (Word, Excel, and Outlook); experience with data entry or laboratory data systems preferred., • Ability to work independently with minimal supervision, prioritize assigned tasks, and maintain professional working relationships., • Ability to collaborate effectively with cross-functional teams, including research and development, production, quality, and engineering personnel., • Understanding of manufacturing quality systems and regulatory requirements (ISO 13485, cGMP preferred). Our Awesome Benefits! Working for a growing innovative company like Argen means exciting opportunities for training and learning, career development and advancement from only the best in the dental industry. With all that hard work, Argen is committed to ensuring the welfare of its employees and provides an amazing benefit package that includes: • Health/Dental/Vision Plans, • 401k with Employer Match, • Paid Vacation, Holiday and Sick Time, • Employee Events, • Wellness Programs, • Discounts for home, travel, entertainment, relaxation that includes Mobile phone service, Technology, Airline and Hotel, Theater/Theme Park tickets, Restaurants and so much more! EOE/M/F/Vet/Disabled VEVRAA Federal Contractor

Job Description Position Summary We are seeking a detail-oriented and technically skilled Engineering Technician to support engineering operations, production processes, equipment maintenance, and continuous improvement initiatives in a fast-paced electronics manufacturing environment. The successful candidate will work closely with engineers, production teams, and quality personnel to troubleshoot technical issues, maintain equipment performance, support product testing, and ensure manufacturing processes meet established quality, safety, and productivity standards. .

Job Description We are seeking a Machinist / Valve Technician with at least 2 years of professional manual machining experience and demonstrated expertise in valve repair and testing. In this role, you will operate a wide array of manual machine tools and specialized equipment to manufacture, overhaul, and test precision valves and hydraulic components to exact tolerances and strict safety standards. Key Responsibilities • Machine Operation: Set up and operate manual lathes, vertical/horizontal mills, drill presses, key seaters, hydraulic presses, hydro test machines, and overhead cranes., • Component Fabrication & Repair: Manufacture, modify, or repair metal parts from blueprints, technical drawings, schematics, or physical samples while maintaining tight tolerances., • Valve & Hydraulic Service: Disassemble, inspect, overhaul, reassemble, and perform hydrostatic/pressure testing on various valves and hydraulic systems., • Quality & Precision Inspection: Utilize precision measuring tools (micrometers, calipers, gauges) to ensure parts meet exact job specifications., • Maintenance & Safety: Adhere to all safety protocols and PPE requirements while maintaining a clean, organized work area and performing routine maintenance on shop equipment.Qualifications & Requirements, • Experience: 2+ years of manual machining experience in a manufacturing, marine, or industrial repair setting., • Technical Expertise: Proven experience in valve troubleshooting, hydraulic component overhaul, and hydrostatic testing., • Blueprints & Tools: Ability to read schematics/blueprints and proficiency with precision measuring equipment., • Physical Requirements: Ability to lift up to 50 lbs safely and unassisted in an active shop environment., • Education: High School Diploma or GED preferred., • Certifications (Bonus): CNC or VRC certifications are a strong plus.Benefits:, • Health insurance, • Paid holidays, • Paid sick leave The benefits listed above are subject to eligibility requirements To see a list of more available jobs, please visit www.leadstaff.com/jobs/ About LEAD Staffing Lead Staffing, established in 2010, specializes in Construction, Industrial and Marine Staffing of Skilled Tradespeople throughout the United States of America. Our goal is to work with regional and national contractors that share our commitment towards safety and to provide long term rewarding work assignments for our valued employees. LEAD is proud to be an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion among our teammates is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. Lead Marine SD

Job DescriptionJob Title: Lab Technician III Duration : 6 Months Location : San Diego CA Shift: 9:30 PM – 6:00 AM (Night Shift) Job Summary Under close supervision, the Production Support Technician performs production support activities to help meet manufacturing goals while following established Good Manufacturing Practice (GMP) guidelines. This entry-level role is ideal for candidates currently pursuing a degree in Biology, Chemistry, or a related scientific field and looking to gain hands-on laboratory and manufacturing experience. Key Responsibilities • Perform production support functions in accordance with GMP guidelines., • Execute moderately complex laboratory and production procedures following established protocols., • Assist in meeting daily production goals and quality objectives., • Operate laboratory equipment and use laboratory chemicals and tools safely., • Maintain accurate records, documentation, and laboratory notes., • Follow detailed work instructions and standard operating procedures (SOPs)., • Adhere to safety policies and proper handling procedures for laboratory materials, including potentially biohazardous materials., • Support manufacturing operations while maintaining quality and compliance standards., • Collaborate effectively with team members to ensure production objectives are met.Required Qualifications, • Currently enrolled in a college or university pursuing an Associate's (AA/AS) or Bachelor's (BA/BS) degree in:, • Biology, • Chemistry, • Biochemistry, • Biotechnology, • Microbiology, • Life Sciences, • Or a related scientific discipline, • Laboratory coursework required.Preferred Qualifications, • 0–2 years of laboratory or manufacturing experience., • Hands-on experience operating laboratory equipment and performing laboratory techniques., • Knowledge of GMP-regulated manufacturing environments., • Familiarity with Quality System Regulations (QSR), ISO standards, ISO 13485, and CMDR., • Experience using Microsoft Office and manufacturing software systems.Required Skills, • Ability to follow detailed instructions and procedures., • Strong documentation and record-keeping skills., • Excellent attention to detail., • Strong verbal and written communication skills., • Ability to work independently and in a team environment., • Strong commitment to workplace safety and quality., • Basic computer proficiency, including Microsoft Office applications.Work Environment, • GMP-regulated laboratory/manufacturing environment., • Exposure to laboratory chemicals and potentially biohazardous materials while following universal precautions., • Strict adherence to safety and quality procedures is required.

Job Description About the Opportunity: Step into an engaging role as a Level II Liquid Penetrant Inspector with our client, a renowned leader in the precision aluminum casting industry. This role offers you the chance to work on high-value projects serving the aerospace, defense, and medical sectors. Anchored in quality and innovation, our client values customer satisfaction, timely delivery, and responsiveness. Join a team dedicated to excellence, and grow your expertise in a supportive, forward-thinking environment. Responsibilities Perform fluorescent and visible dye penetrant inspections on aluminum castings in accordance with approved procedures. Set up, apply, and inspect parts using water-washable and post-emulsifiable penetrant methods. Interpret and evaluate indications based on customer specifications, identifying shrinkage, porosity, cracks, and other defects. Classify, document, and manage nonconformances, escalating issues to MRB when required. Maintain process control by monitoring system performance, inspecting equipment, and ensuring compliance with applicable standards. Train and guide Level I personnel to support quality and process consistency. Collaborate with internal teams to improve product quality and reduce defects. Maintain a safe, clean, and organized work environment. Requirements Current or previous Level II PT certification, or applicable training and experience to obtain certification promptly. Hands-on experience performing fluorescent penetrant inspections on aluminum castings. Proficiency in penetrant process setup, inspection, and documentation. Ability to read and interpret engineering drawings and specifications. Ability to meet required vision standards. Approximately 5 years of relevant manufacturing experience. Basic computer skills and strong communication abilities. Benefits & Perks Competitive pay of $25–$30 per hour, with potential for higher rates for Level III candidates. Play a key role in quality assurance within the aerospace and defense industries. Opportunities for professional growth in a supportive, certified environment. Work with diverse teams and projects while expanding your technical skills and career experience. Why Apply Through Total Aviation Staffing? Total Aviation Staffing connects aviation professionals with top-tier opportunities across the industry. Whether you’re looking for roles in: Commercial Aviation – Passenger airlines, cargo operations, and aircraft leasing Business & General Aviation – Corporate jets, charter services, and private aviation MRO & Aftermarket Services – Aircraft maintenance, repair, overhaul, and parts distribution Aerospace & Defense – Military aviation, space systems, and defense programs Aviation Technology & Manufacturing – OEMs, avionics, propulsion, and emerging technologies Even if this role isn’t the perfect fit, applying with us gives you access to multiple career opportunities that may not be publicly advertised. Work with top companies in aviation and aerospace. Get priority access to multiple job openings. Receive expert career guidance from specialized aviation recruiters. Apply today to take the next step in your aviation career. #ZR \nCompany Description We’ll help take your career forward by connecting you with the top aerospace and aviation companies across the U.S. Whether you strive to be an a&p mechanic, an aircraft technician, a flight attendant, or work in aviation customer service, Total Aviation Staffing can enhance your open sky aviation careers so you can achieve your goals. Not only will we help you extend your job search and find the right role for you, but we can help build your resume, help you apply to aviation job openings, and get you closer to landing your dream full-time job. We’ll help take your career forward by connecting you with the top aerospace and aviation companies across the U.S.\r\n\r\nWhether you strive to be an a&p mechanic, an aircraft technician, a flight attendant, or work in aviation customer service, Total Aviation Staffing can enhance your open sky aviation careers so you can achieve your goals.\r\n\r\nNot only will we help you extend your job search and find the right role for you, but we can help build your resume, help you apply to aviation job openings, and get you closer to landing your dream full-time job.

Job Description Rock West Composites, Inc. has an exciting opportunity for a Test Technician. Rock West Composites, Inc. is an engineering and manufacturing company dedicated to providing innovative solutions for commercial and government customers. We provide cradle-to-grave services for primary and secondary composite structures. This position is located in our San Diego, CA HQ office and reports to the VP of Engineering. Position Summary: This role is responsible for conducting mechanical, chemical, and environmental testing to ensure materials meet customer, regulatory, and quality requirements. Working closely with Quality, Engineering, and Manufacturing teams, you'll help generate critical material data, maintain compliance programs, and support continuous improvement initiatives that directly impact product quality and manufacturing performance. What You'll Own: • Execution of material testing and qualification activities, • Generation and documentation of accurate test data and reports, • Calibration and compliance programs for testing equipment, • Testing procedures, standards, and quality documentation, • Continuous improvement of material testing methods and processes Essential Functions: Material Testing & Validation • Perform mechanical, chemical, and environmental testing of composite materials, adhesives, coatings, and related products, • Conduct testing such as lap shear, hardness, adhesion, viscosity, flammability, cure analysis, and coating thickness evaluations, • Prepare and test composite coupons and material samples to support receiving inspection, recertification, and engineering requirements, • Assist with structural and component-level testing as required Quality & Compliance • Support calibration programs for measuring and testing equipment across site operations, • Maintain compliance programs for pressure, temperature, humidity, and particulate-controlled environments, • Ensure testing activities meet customer specifications, internal procedures, and quality requirements, • Support Quality Assurance teams with inspection, verification, and documentation activities Documentation & Reporting • Generate clear and accurate test reports documenting methods, results, and conclusions, • Interpret customer engineering and process specifications, including Boeing and other aerospace requirements, • Assist in developing testing standards, procedures, and work instructions, • Maintain testing records and supporting documentation in accordance with quality requirements Continuous Improvement & Collaboration • Partner with Quality, Engineering, and Manufacturing teams to resolve material and process issues, • Support installation, validation, and maintenance of testing and data acquisition equipment, • Identify opportunities to improve testing methods, process controls, and material qualification activities, • Assist in standardizing testing processes to improve consistency, efficiency, and product quality What you Bring: Education and Experience: • Bachelor's degree in Engineering, Chemistry, Materials Science, or related field preferred, • 5+ years of experience performing mechanical, chemical, or environmental testing of composite materials, adhesives, coatings, or related products, • Experience generating technical reports and documenting test methods and results Technical Skills: • Knowledge of composite materials, adhesives, coatings, and bonding processes, • Familiarity with mechanical testing methods such as lap shear, hardness, adhesion, and flammability testing, • Experience with testing equipment, data acquisition systems, and laboratory procedures, • Ability to read and interpret engineering drawings, specifications, and customer requirements Tools and Software: • Proficiency with Microsoft Office (Excel, Word, PowerPoint), • Experience with testing and measurement equipment, • Familiarity with Boeing specifications and aerospace quality requirements is a plus Compensation & Benefits • Hourly Range: $30-$40 per hour (based on experience and skillset), • 100% Employer-Paid Medical & Dental, • Annual Bonus Program, • 401(k) with 5% Match, • Employee Stock Option Program, • 9/80 Work Schedule (every other Friday off), • 8 Paid Holidays + Generous PTO (up to 4 weeks after 5 years), • $2,500 Tuition Reimbursement Equal Opportunity Employer Rock West Composites is an Equal Opportunity Employer. It is the policy of the company to provide equal opportunity for all employees and applicants for employment without regard to race, color, religion, religious creed, ancestry, gender, pregnancy, sex, sexual orientation, transitioning status, gender identity, gender expression, national origin, age, genetic information, military and veteran status, marital status, medical condition, mental disability, physical disability, or any other basis protected by local, state, or federal law. EEO is the law. We also prohibit compensation discrimination under all applicable laws. Certain positions require meeting the U.S. Person definition in 22 CFR 120.62. ITAR Requirement To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder) as defined by 8 U.S.C. 1101(a)(20), (iii) Refugee under 8 U.S.C. 1157, or (iv) Asylee under 8 U.S.C. 1158, Must be authorized to work in the U.S. without the company’s immigration sponsorship now or in the future. Rock West Composites will not offer immigration sponsorship for this position. Rock West Composites will not seek an export authorization for this role. Rock West Composites maintains a Drug and Alcohol-Free Workplace. Depending on state law and the nature of the position, candidates who receive a conditional offer of employment may be required to complete a drug screening. Rock West Composites may also conduct drug and alcohol testing based on reasonable suspicion, post-incident, or for safety-sensitive positions as permitted by law. Accommodation Notice If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact 858-537-6260.

Job Description Job Title: R&D Catheter Engineering Technician Location: San Diego - onsite 5x/week Compensation: $90,000 - $110,000 Sponsorship: Not available at this time Position Overview The R&D Neurovascular Catheter Technician at Synchron plays a hands-on role in developing next-generation neurovascular delivery systems that enable the company’s minimally invasive brain–computer interface (BCI) technology. This role focuses on precision prototyping, micro-scale assembly, and bench testing of catheter and microcatheter systems used to navigate the cerebral vasculature for safe deployment of Synchron’s next generation implantable devices. The technician works closely with R&D engineers and clinical experts to advance device concepts from early feasibility through design refinement, contributing directly to Synchron’s mission of restoring functional independence for people with paralysis. Responsibilities: Neurovascular Prototype Fabrication Prototype builds · Build catheter prototypes and sub-assemblies under magnification, including liner prep, braid and coil reinforcement, polymer jacket reflow lamination, tipping, and marker band placement · Perform bonding operations with UV-cure adhesives and epoxies, and apply hydrophilic coatings per work instructions · Set up and run lab equipment such as reflow/heat-shrink stations, hot-air and tipping machines, UV cure systems, and coating fixtures · Design and fabricate simple fixtures, mandrels, and tooling with engineers Testing and characterization · Run bench tests including tensile/bond strength, kink resistance, torque response, flexibility, burst/leak, and coating lubricity and particulate · Run simulated-use testing in tortuous neurovascular anatomical models to evaluate trackability, pushability, and device delivery · Perform dimensional inspection using optical comparators, vision systems, micrometers, and pin gauges · Collect, organize, and do first-pass analysis of test data; summarize results for engineering review Documentation and quality · Record work accurately in lab notebooks, build travelers, and test data sheets following Good Documentation Practices · Draft and red-line work instructions, test methods, and build procedures · Support design verification builds, process characterization, and design transfer to manufacturing partners · Perform receiving inspection on incoming components and materials such as tubing, polymers, and coatings Lab operations · Maintain cleanroom and lab housekeeping, gowning, and equipment calibration/maintenance status · Track lab inventory and help order materials and components · Follow EHS, chemical handling, and cleanroom protocols Early Process Development · Provide input on developing scalable fabrication techniques that can transition into pilot manufacturing. · Identify critical process parameters and assist in building repeatable, early-stage processes. · Support feasibility work that informs later-stage process validation. Qualifications: Preferred qualifications · Experience with neurovascular, endovascular, or peripheral interventional catheters and delivery systems · Familiarity with catheter materials such as PTFE liners, Pebax, nylon, and polyimide, and with hydrophilic coatings · Experience running simulated-use testing in anatomical or tortuous-path models · Exposure to design controls, design verification, and test methods aligned with ISO 10555 · Experience with electrode leads, fine-wire interconnects, or active implantable devices · Experience with laser welding, laser cutting, or nitinol components · Basic statistics (Minitab or JMP) a plus · Physical requirements and work environment · On-site role in an R&D lab and cleanroom; full gowning required in controlled areas · Able to sit or stand at a microscope workstation for extended periods and do repetitive fine-motor tasks · Able to lift up to 25 lbs. · Corrected vision adequate for detailed work under magnification, including color discrimination · Works with adhesives, solvents, and UV/heat equipment using the required PPE · Occasional extended hours to support build or test milestones · Cleanroom experience (ISO Class 7 or 8)

Job DescriptionThe Fountain Group is currently seeking an Packaging Technician for a prominent client of ours. This position is located in San Diego, CA. Details for the position are as follows: Title: Packaging Technician Location: San Diego, CA 92115 Shift: 1st shift hours, M-F 6:00 AM - 2:30 PM Duration: 6+ Months (Possible extension/conversion based on performance and budget) Hourly Rate on W2: $19-22 Job Description: Responsible for the manual assembly of blood screening kits according to manufacturing instructions. Primary Responsibilities: -Handling of temperature-sensitive semi-finished goods for the use in blood bank kits -Performing ERP transactions -Performing daily cycle count activities -Verify materials for manufacturing work orders -Operate manual and motorized warehouse equipment -Maintain training procedures -General packaging area housekeeping -Maintain detailed and accurate device history records and log books -Perform routine set-up of packaging station Additional Responsibilities: -Follows all safety rules -Enter cold/frozen environments -Maneuver pallets and equipment -Assist in maintaining inventory accuracy -Track labor hours for process orders Knowledge, Skills and Abilities: -Zero to basic knowledge of ERP system -Basic knowledge of GMP -Ability to follow oral and written instructions -Basic computer knowledge and use of email -Basic organizational skills -Attention to detail -Repetitive standing, walking, bending, and lifting -Basic mathematic skills required By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at Privacy Policy

Job DescriptionPosition Overview We are seeking a skilled Electro-Mechanical Assembly Technician II to join a manufacturing team producing precision mechanical and electronic equipment. This hands-on role combines mechanical assembly, electronics assembly, cable and wire harness fabrication, soldering, and basic electrical testing. The ideal candidate has experience working with mechanical components and electronic assemblies, can interpret technical drawings and wiring diagrams, and takes pride in producing accurate, high-quality work. The ability to work independently, troubleshoot basic assembly issues, and follow established quality standards is essential. Key Responsibilities Mechanical Assembly • Assemble mechanical subassemblies and complete units using technical drawings, assembly procedures, and work instructions. Work with gears, gearboxes, motors, metal housings, pumps, O-rings, fasteners, and other mechanical components. Use hand tools, power tools, adhesives, and other assembly equipment according to specifications. Build standard and non-standard assemblies while maintaining accuracy and consistency. Electronics, Soldering & Cable Assembly Perform precision hand soldering of through-hole components and, when qualified, surface-mount components on printed circuit boards (PCBs). Fabricate cable assemblies and wire harnesses, including cutting, stripping, crimping, soldering, and connector installation. Assemble electrical connections and electronic components according to wiring diagrams and assembly instructions. Follow applicable soldering workmanship requirements, including IPC J-STD-001 standards. Testing, Inspection & Troubleshooting Perform in-process inspections of mechanical assemblies, solder joints, electrical connections, and completed units. Conduct basic electrical tests using multimeters, continuity testers, power supplies, and established test equipment. Record test results, identify units that do not meet specifications, and report quality concerns. Troubleshoot basic assembly and electrical issues by reviewing drawings, taking measurements, and inspecting components. Perform minor rework when appropriate and escalate more complex issues to the appropriate supervisor or engineering personnel. Quality, Documentation & Safety Read and interpret technical drawings, assembly drawings, wiring diagrams, bills of materials (BOMs), and work instructions. Follow established quality standards, ESD handling procedures, and safe work practices. Maintain a clean, organized work area and participate in 5S and continuous improvement activities. Assist with updating assembly procedures and work instructions as needed. Support training of newer technicians on basic assembly and testing procedures when qualified. Meet production schedules and work overtime as needed. Qualifications High school diploma or equivalent. Approximately 2–5 years of hands-on experience in mechanical assembly, electronics assembly, or a related manufacturing environment. Experience assembling mechanical components, subassemblies, or finished products. Hands-on experience with cable assemblies, wire harnesses, electrical connectors, or PCB soldering. Ability to read and interpret technical drawings, wiring diagrams, and assembly instructions. Familiarity with hand tools, power tools, soldering stations, crimping tools, wire strippers, and basic electrical test equipment. Ability to use multimeters and continuity testers for basic electrical testing. Strong attention to detail, manual dexterity, and commitment to quality. Ability to work independently, follow established procedures, and meet production goals. Preferred Qualifications Experience with both mechanical and electronic assembly. Familiarity with IPC-A-610 and/or IPC J-STD-001 standards. IPC J-STD-001 certification or willingness to complete applicable training. Experience with surface-mount component rework. Experience in low-volume, high-mix manufacturing or production environments. Familiarity with industrial control systems, electro-mechanical equipment, or precision assemblies. Experience with basic troubleshooting, inspection, and test documentation. What We're Looking For We are looking for a dependable, hands-on technician who enjoys building precision products and takes ownership of quality. The successful candidate will have a solid foundation in mechanical or electronics assembly, with the versatility to work across both disciplines. This position focuses on accurate assembly, testing, and troubleshooting rather than electrical engineering or circuit design. You should be proficient in: • Soldering, • PCB Assembly (Printed Circuit Board Assembly), • Mechanical Assembly Skills, • cable assemblies, • hand tools, • technical drawings, • wire harnesses