Trabajos manufacturing technician en Warren, MichiganCrear alertas

Pay: $41.58/hour Schedule: 1st Shift (6:00 AM ? 2:30 PM) Aramark Facilities Management is hiring a Journeyman HVAC Technician to support the General Motors Global Technical Center, a large, non-manufacturing campus listed on the National Register of Historic Places. This role is ideal for a senior HVAC professional with strong commercial or industrial experience (preferred over residential) who can support complex mechanical systems in a high-performance facilities environment. UAW JOURNEYPERSON REQUIREMENTS: 1. Department of Labor Certificate of Completion of a Bonafide 4 year/8000 hour apprenticeship program., 2. If not, must have 8 years of verifiable experience. If the 8 years is from a UAW facility, you must have a letter from the facility on company letterhead stating the dates of service and classification/s of the work performed during the years you are submitting as your experience. This letter must then be signed by a company representative with their name and title printed and it must also be signed by the local union bargaining chair or steward at the facility with their name and title printed. If the 8 years experience is not at the UAW facility, the additional years of verifiable experience must be on company letterhead, signed by the company representative and then taken to be notarized. • Operate, maintain, troubleshoot, and repair complex HVAC systems across a large industrial campus, • Work with boilers, chillers, cooling towers, heat recovery systems, pumps, fans, VFDs, and refrigeration equipment, • Monitor and adjust HVAC and energy systems to optimize performance and efficiency, • Perform preventive, corrective, and predictive maintenance, • Troubleshoot mechanical and electrical HVAC issues using root cause analysis, • Read and interpret blueprints, schematics, and manufacturer specifications, • Install, repair, and adjust controls, thermostats, ductwork, piping, and auxiliary equipment, • Respond to system alarms and restore equipment to proper operation, • Use a computerized maintenance management system (CMMS) to document work, • Work safely at heights and in confined spaces when required, • Mentor apprentices and support other HVAC technicians as needed, • Follow all Aramark and GM Technical Center safety and operating standards At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. • Valid State of Michigan HVAC license OR recognized Journeyman Card, • Minimum of 8 years of verifiable HVAC experience in commercial or industrial environments, • Strong working knowledge of HVAC mechanical and electrical systems, • Ability to read and interpret drawings, schematics, and specifications, • High school diploma or equivalent\, • Strong troubleshooting, communication, and documentation skills, • Ability to work independently or as part of a skilled trades team This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on , and .

Job DescriptionDescription: This is a 2nd shift (3:15 p.m. - 11:45 p.m.) position. Summary The Spline/Thread Rolling Machine Job Setter (or Set-Up Technician) is responsible for preparing and adjusting automatic spline roll-forming machines to cold-form splines on shafts according to precise setup instructions and machine capabilities. This role ensures that spline shafts meet exact dimensional and quality specifications before production. Functions Job Specific Responsibilities · Place shims to position spline racks (used to form spline teeth by pressure-rolling) at the specified height, verifying with a micrometer. · Adjust vernier scales to achieve the correct distance of the upper and lower spline racks to the machine centerline. · Install spline racks in upper and lower wedges and clamp them securely. · Position the spline blank between machine centers and adjust the headstock to match the workpiece length. · Start and cycle the machine to verify operation as specified. · Inspect trial-run splines for conformance to specifications using micrometers and gauges. · Adjust the machine to correct any setup errors if splines do not meet specs. · Set up roll-forming machines using cold-form thread racks to cold-form threads on shafts (similar set up as for spline racks). · Follow operational capabilities of the machine and adhere to blueprints or rolling orders. · Collaborate with cross-functional teams to meet production goals and process improvement objectives. General Responsibilities · Adhere to company policies and procedures. · Follow all safety and MIOSHA requirements. · Maintain a clean work environment. · Participate in training and meetings. · Follow all company Quality, Environmental, Safety, and Standards of Conduct policies. · Report safety or quality concerns in a timely manner. · Understand and implement Drake Driven Core Values. Core Competencies · Time Management · Accountability · Results driven · Safety Awareness · Communication · Quality focus · Teamwork and Collaboration · Attention to detail This is a full-time, non-exempt position (40 hours per week). Overtime may be required Requirements: Eligibility Qualifications · Proven experience in a Spline Rolling Machine Job Setter role or related manufacturing/rolling machine setup work. · Basic Knowledge of Splines and Threads (Classifications, Dimensions, and Terminology). · Strong problem-solving and analytical skills. · Ability to read and interpret blueprints, rolling orders, and mill schedules. · Proficiency with hand tools, gauges, and micrometers. · Ability to work independently. · Experience in leadership or mentoring roles (preferred). · Familiarity with modern manufacturing tools, technologies, or methodologies (preferred). · Relevant certifications or advanced training in metalworking or machine setup (preferred). Physical Requirements · Ability to lift up to 50 pounds. · Ability to stand, walk, and perform repetitive tasks. · Physical stamina for production work. Work Environment · Manufacturing environment with exposure to machinery, chemicals, and temperature changes. PPE required.

Job DescriptionManufacturing & Shipping Technician-Madison Heights, Michigan Contract to Hire Day Shift Pay Rate: $25-$35 per hour (based on proven experience) Some travel will be required Position Overview Our client, an automotive manufacturer in Madison Heights, is seeking a hands-on Manufacturing & Shipping Technician. This role supports day-to-day manufacturing and shipping operations by operating shop equipment, completing mechanical and basic electrical tasks, and safely moving materials. The ideal candidate is mechanically inclined, technically capable, and comfortable working in an active manufacturing environment. We are looking for a dependable, safety-conscious professional who takes pride in quality work, solves problems with a practical approach, and contributes positively to a team environment. Key Responsibilities • Operate machinery and equipment, including a Bridgeport mill, lathe, table saw, hand saws, and drills., • Use hand tools to complete manufacturing, assembly, maintenance, and related shop tasks., • Perform mechanical work and basic troubleshooting as needed., • Support shipping operations, including preparing, handling, and moving materials., • Safely operate a hi-lo/forklift to transport materials and products., • Assist with basic 110-volt electrical work., • Follow all established safety procedures and maintain a clean, organized work area., • Qualifications, • Experience using hand tools in a manufacturing, production, or shop environment., • Working mechanical knowledge and strong technical aptitude., • Ability to operate a Bridgeport mill, lathe, table saw, hand saws, and drills., • Experience operating a hi-lo/forklift., • Experience with basic 110-volt electrical work., • Microsoft office skills required, • Ability to work safely, follow instructions, and manage multiple tasks. A successful candidate will be subject to a background check and must receive satisfactory results of the same, as a condition of joining the team. By applying for this role, you confirm that all information submitted is accurate and complete. You further acknowledge that providing false or fraudulent information during the application process is cause for denial of an offer, revocation of any existing offer, or other adverse action, up to and including termination after the start of your commencement of work. #ff-dd-ov

Job DescriptionParagon Technologies, a SunSource company, specializes in providing world-class service, repair and re-manufacturing in the areas of electronics, hydraulics, robotics, servos and mechanical components for various industries. https://www.paragontech.com/ Oversee all activities in the organization related to ordering, receiving, storing and distributing materials, equipment, merchandise, supplies and products Responsibilities • Disassemble and evaluate parts of cancelled jobs., • Operate a forklift and hand tools., • Operate an overhead crane., • Recycle excess inventory components., • Consolidate and organize rack shelves., • Scan returned surplus/jobs to rack locations., • Deliver components to Technician locations according to department procedure., • Maintain clean and orderly Inventory and Surplus area., • Follow all safety policies and procedures for department and company., • Receive incoming jobs and/or purchased parts and handle according to department procedure., • Gather all return to inventory parts daily and return to the appropriate location., • Tear hydraulic/electronic units down to component level and store parts according to department procedures., • Cross-trained in all warehouse departments: Shipping, Receiving and Inventory., • Other duties as assigned by management.General Education and Experience, • Education—High School Diploma or equivalent (GED) required., • Experience—Forklift experience, computer literate, ability to identify mechanical and electronic components a plus., • Physical Dexterity—Must be able to lift up to 75lbs. Position stands 95 to 100% of the workday. Frequently required to stoop, bend, kneel and crouchCore Competencies Attention to Detail: Thoroughness in accomplishing a task through concern for all the areas involved, no matter how small. Monitors and checks work or information and plans and organizes time and resources efficiently. Job-Focused Learning: Demonstrates eagerness to acquire necessary technical knowledge, skill and judgment to accomplish a result or to serve a customer’s needs effectively. Has desire and drive to acquire knowledge and skills necessary to perform job more effectively. Teamwork: Using appropriate interpersonal styles and methods to inspire and guide individuals (or a team) toward goal achievement: modifying behaviors to accommodate the tasks, situations, and people involved. Problem Solving/Analytical Thinking: Builds a logical approach to address problems or opportunities or manage the situation at hand by drawing on own knowledge and experience base and calling on other references and resources as necessary. Follow-Up: Establishing procedures to monitor the results of delegations, assignments, or projects; taking into consideration the skills, knowledge, and experience of the assigned individual and characteristics of the assignment or project. Drive for Results (Work Standards): Demonstrates concern for achieving or surpassing results against an internal or external standard of excellence, shows a passion for improving the delivery of services with a commitment to continuous improvement. Equal Opportunity Employer, including disability and protected veteran status. If you are an individual with a disability and require an accommodation to complete the application process, please contact recruiting@sunsrce.com to request reasonable accommodation. Only requests for accommodation in the application process will be returned from this email address. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here, aquí). Sun-Source | Privacy Policy #paragontechassc We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Summary The Cultivation Technician supports daily cultivation and harvest operations in a regulated facility. Cultivation Technicians have strong attention to detail, a reliable work ethic, and can follow SOPs exactly. Tech-savvy is a plus (data entry, tablets, tracking systems). This role requires prolonged periods of standing and may sometimes require longer hours, essential on trim/harvesting days. Essential Functions • Daily plant care: watering/feeding, transplanting, pruning/defoliation, trellising, • Maintain clean, organized work areas; follow sanitation and PPE requirements, • Support harvest/trim: harvesting, bucking, sorting, hanging/drying support, trimming assistance, • Perform room checks and report issues (pests, mold, nutrient stress, equipment problems), • Complete required logs and documentation accurately (paper and/or digital), • Follow all SOPs and compliance procedures (batch integrity, chain of custody, waste handling), • Perform other duties as assigned by Cultivation manager. Requirements • High attention to detail and consistent quality of work, • Dependable attendance and punctuality, • Ability to follow written and verbal procedures in a regulated environment, • Comfortable with repetitive, hands-on work and working at a steady pace, • Physical ability to stand for long periods; lift up to 50 lbs; frequent bending/reaching, • Must meet any applicable state/regulatory employment requirements, • Cultivation, greenhouse, agriculture, horticulture, or production/manufacturing experience is preferred but not required., • Experience with METRC is a huge bonus!

Job DescriptionBenefits: • Paid time off, • Bonus based on performance, • Company parties, • Free food & snacks, • Training & development, • Tuition assistance, • Wellness resources About the Role: Join K-TEC SYSTEMS INC as a Wire Harness and Thermocouple Technician in Ferndale, MI, where you'll play a crucial role in our innovative manufacturing processes. We are looking for a dedicated individual who thrives in a fast-paced environment and is eager to contribute to our mission of delivering high-quality solutions to our clients. Responsibilities: • Assemble and test wire harnesses and thermocouples to meet strict quality standards., • Read and interpret technical drawings and schematics for accurate assembly., • Utilize precision tools and equipment for wire cutting, stripping, and termination., • Conduct routine inspections and troubleshooting to ensure optimal performance., • Collaborate with engineering and production teams to improve processes and efficiency., • Maintain a clean and organized workspace to uphold safety standards., • Document production activities and maintain accurate records of work performed., • Adhere to all company policies and procedures regarding quality and safety.Requirements:, • High school diploma or equivalent; technical certification preferred., • Proven experience in wire harness assembly and thermocouple manufacturing., • Strong understanding of electrical components and wiring techniques., • Ability to read and interpret technical specifications and blueprints., • Excellent attention to detail and problem-solving skills., • Ability to work independently as well as part of a team., • Strong communication skills and a positive attitude., • Willingness to learn and adapt in a dynamic work environment.About Us: K-TEC SYSTEMS INC has been a leader in the manufacturing industry for over 20 years, specializing in high-quality wire harnesses and thermal solutions. Our commitment to innovation and customer satisfaction has earned us a reputation for excellence, making us a preferred partner for many businesses. Employees enjoy a collaborative atmosphere where their contributions are valued and growth opportunities are abundant.

Job Description Electro-Mechanical Assembly Technician Position Overview: We are currently seeking a skilled Electronic and Mechanical Assembly Technician to join our prosthetics manufacturing team. In this function, you will play a crucial role in ensuring the quality and reliability of our Microprocessor Controlled Hydraulic Knee and Foot prosthetics. Your primary focus will be the manufacturing of circuit board assemblies and wire harnesses. This will entail the soldering of wires to surface mount and through hole points, as well as other tasks needed to create the circuitry. This role demands precision, attention to detail, and a commitment to delivering products that meet or exceed specifications. The hours are Monday – Friday, 7:15 AM – 5:00 PM. Perhaps occasional Saturdays for about 6 hours. Key Responsibilities: • Perform soldering of electronic components onto printed circuit boards (PCBs)., • Inspect and verify the quality of work performed., • Operate soldering equipment and tools with precision and adherence to safety protocols., • Collaborate with the rest of the assembly team to maintain efficient workflow and meet production targets., • Assist in the assembly process by performing other electro-mechanical tasks within the department as needed., • Contribute to maintaining a clean and organized work area to ensure a safe and efficient working environment., • Report any material shortages, discrepancies, or issues to the supervisor. Qualifications: High school diploma or equivalent. Electronic assembly experience required. Comparable activities include Audio Equipment installation, Home Networking and PC building. Strong understanding of soldering techniques, including through-hole and surface mount, is preferred Ability to read and interpret assembly instructions and technical drawings. Detail-oriented with a keen eye for quality and precision. Effective communication skills and the ability to work collaboratively within a team. Salary Info: • Starting wage $18-$21/hr based on experience College Park Industries is an Equal Opportunity Employer You should be proficient in: • Soldering

Job Description Electrical Assembler Madison Heights, MI Company Overview: Ajax Tocco Magnethermic (ATM), a subsidiary of ParkOhio, traces its roots back to the 1800s and has a rich history of excellence in induction heating and melting solutions. The present company was formed in 1959 when the Magnethermic Corporation acquired the assets of Ajax Electrothermic Corp. combining their expertise and capabilities. Position Summary: The Coil Fabrication & Repair Technician is responsible for the complete manufacturing, repair, and refurbishment of induction coils used in industrial heating applications. This includes coil winding, brazing, casting, hosing, and full mechanical assembly. This role requires a strong mechanical aptitude, the ability to read and interpret blueprints, and the discipline to follow established processes while maintaining high quality and productivity standards. The technician will play a critical role in ensuring high-quality assemblies that meet engineering specifications, production schedules, and company standards. Job Duties: • Set up and operate coil winding equipment based on design specifications and production requirements., • Fabricate and assemble custom electrical coils using brazing, insulation, taping, varnishing, and finishing processes., • Read and interpret blueprints, bills of materials, and engineering drawings., • Assemble, test, and inspect coils and furnace-related components., • Perform grouting, de-grouting, and regrouting on coils and furnace assemblies., • Install hydraulic tubing, cylinders, hoses, and related assemblies according to specifications., • Cut, crimp, solder, and leak-test water-cooled cables and hoses., • Conduct hydraulic and water testing to verify system functionality and integrity., • Troubleshoot and resolve basic assembly and fit-up issues What you need to be successful: • High school diploma or equivalent, • 2+ years of experience in manufacturing, fabrication, or electromechanical assembly, • Ability to read and interpret blueprints, schematics, and BOMs, • Basic understanding of electrical and mechanical principles, • Ability to use hand tool, power tools, and precision measuring instruments Other duties as assigned.

Job Description Job description: Job Summary Mayco International is a fast growing, technologically driven manufacturing company. Our culture is built upon our values of integrity, pride, and family. Our people are our greatest asset, and we are looking for awesome individuals to join our growing team! Mayco International is headquartered in Sterling Heights, Michigan with more than 7,000 employees in 45 plants across the USA, China, India, Russia, South Africa, South Korea, and Australia. We provide design and advanced engineering services, tooling, manufacturing and assembly, sequencing, and logistics, as well as systems integration services. We serve OEMs and other Tier 1 suppliers in North America, Europe, Asia, Africa, and Australia. Our culture is team-based, interactive, flexible, and supports continuous learning experiences, both hands-on as well as formal. Tools such as Lean Manufacturing, Kaizen, and World Class Manufacturing are used to improve our processes which improve our performances individually and as a group. We are growth focused and believe that a positive working environment is critical to our success. Currently we are recruiting for a Machine Repair Maintenance Technician to join our team on 3rd shift. This position’s primary responsibility is to ensure that equipment is safely operating and meets its intended use optimizing equipment up-time. The purpose of the Machine Maintenance employee is to make scheduled and unscheduled repairs on all machines and related equipment used in manufacturing Responsibilities • Ensure preventative / predictive maintenance on equipment, machinery, tools and document PM through the Maintenance Manager., • Review and inspect equipment on a daily basis for safe and proper operating conditions., • Assist with major job repairs to machine, equipment or components when needed., • Submit requests to Machine Maintenance Manager for proper approval and authorization for machine replacement parts, equipment or components., • Follow all safety precautions on repairs to equipment, machinery and tools per MPI’s / OSHA requirements., • Any other job deemed necessary by the Machine Maintenance Manager., • Follows all safety, housekeeping, and company policies and procedures., • Follows all environmental procedures concerning spills, containment and disposal of hazardous materials., • Coordinates and maintains all job responsibilities in a continuous and flexible manner and performs other related duties and assignments as required. Education and Experience: • BS in Electrical Engineering, Skilled trades or Equivalent., • Some college or technical education with courses in Hydraulic circuits, blue print reading, components repairs and Electrical circuits., • Minimum 3 years Operation of an injection molding machine., • Minimum 3 years in skilled trade capacity working on Injection Molding machinery., • Knowledge in the Set-up of plastic molding machinery., • Familiar with the principles of hydraulics, electricity and pneumatics., • Ability to trouble shoot and repair circuits using schematics, blueprints and sketches., • Ability to properly use equipment and tools to check and repair machinery. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Tuition reimbursement, • Vision insurance\nCompany Description Mayco International is a technology-driven manufacturing leader headquartered in Sterling Heights, Michigan, with more than 7,000 employees across 45 plants worldwide. We proudly serve OEMs and Tier 1 suppliers by providing design, engineering, tooling, manufacturing, assembly, logistics, and systems integration services. At Mayco, our people are our greatest strength. We foster a culture built on integrity, pride, and family values, where teamwork, continuous learning, and growth are at the center of everything we do. Using Lean Manufacturing, Kaizen, and World Class Manufacturing practices, we’re focused on innovation and improvement—creating a positive environment where our employees can thrive while helping us shape the future of manufacturing. Mayco International is a technology-driven manufacturing leader headquartered in Sterling Heights, Michigan, with more than 7,000 employees across 45 plants worldwide. We proudly serve OEMs and Tier 1 suppliers by providing design, engineering, tooling, manufacturing, assembly, logistics, and systems integration services.\r\nAt Mayco, our people are our greatest strength. We foster a culture built on integrity, pride, and family values, where teamwork, continuous learning, and growth are at the center of everything we do.\r\nUsing Lean Manufacturing, Kaizen, and World Class Manufacturing practices, we’re focused on innovation and improvement—creating a positive environment where our employees can thrive while helping us shape the future of manufacturing.

Job Description The Electrical Technician is responsible for building, testing, troubleshooting, repairing, and maintaining electrical and electromechanical systems used in product development, manufacturing, and testing environments. This position works closely with engineers to assemble prototypes, develop test fixtures, install instrumentation, perform validation testing, and support new product development from concept through production. The ideal candidate is mechanically inclined, comfortable reading electrical schematics, enjoys hands-on problem solving, and has experience working with electronic assemblies, instrumentation, wiring, and test equipment. Essential Duties & Responsibilities Electrical Assembly & Fabrication • Build, wire, and assemble electrical and electromechanical systems, test fixtures, and control panels., • Assemble prototype and production hardware using hand and power tools., • Perform cable, harness, connector, and PCB assembly including soldering and rework., • Modify electrical assemblies and printed circuit boards as needed for testing and validation., • Install sensors, instrumentation, and data acquisition equipment on prototype and production systems. Testing & Validation • Set up, operate, and maintain electrical test equipment including:, • Oscilloscopes, • Digital multimeters, • Power supplies, • Data acquisition systems, • Environmental and functional test equipment, • Execute electrical, functional, and validation testing according to engineering procedures., • Troubleshoot electrical systems to identify failures and determine root cause., • Record, document, and communicate test results and observations., • Support engineering teams during product qualification and verification testing., • Military proptoype LRU and Harness assembly into Military vehicle for tests and user trials Engineering Support • Read and interpret electrical schematics, wiring diagrams, mechanical drawings, and assembly instructions., • Assist engineers with prototype development and design verification., • Build and maintain custom test fixtures and hardware-in-the-loop (HIL) systems., • Provide recommendations for improving product reliability, manufacturability, and testing efficiency., • Support Engineering Change Orders (ECOs) and product revisions. Manufacturing Support • Troubleshoot production issues related to electrical assemblies., • Assist with first article inspections and production start-up activities., • Maintain tools, fixtures, and laboratory equipment., • Support inventory control of electrical components and lab equipment., • Ensure compliance with quality standards and manufacturing procedures. Safety & Quality • Follow all company safety policies and electrical safety procedures., • Maintain an organized, clean, and safe work area., • Ensure work meets company quality standards and customer specifications., • Participate in continuous improvement initiatives.

Job DescriptionDimensional Quality Assurance Technician (CMM/Metrology) Step into a role where your precision keeps production moving and customers confident. As our Dimensional Quality Assurance Technician, you’ll spend your day verifying in-process work and final parts, ensuring everything that leaves our facility meets strict quality standards. A day in the role • Perform in-process and final inspections before shipment using gauges, a coordinate measuring machine (CMM), protractors, coating thickness meters, calipers, micrometers, and visual inspection., • Record and manage final inspection data in structured spreadsheets to maintain accurate quality records., • Partner with production supervisors to identify, troubleshoot, and mitigate quality issues on the floor., • Escalate systemic nonconformances to management and initiate or follow established containment protocols to protect the customer, maintain production flow, and reduce internal rework., • Verify and document gauge accuracy at defined intervals in accordance with quality procedures., • Carry out additional tasks as assigned by the supervisor. What you bring, • High School Diploma (or equivalent)., • At least 1 year of experience in a Quality Technician or equivalent inspection role., • Meticulous attention to detail and strong problem-solving ability., • Comfortable reading a tape measure and performing dimensional checks., • Ability to read and interpret engineering drawings/blueprints and specifications., • Proficiency with Automotive Manufacturing Systems. Tools and technology you’ll use, • Coordinate Measuring Machine (CMM), • Calipers and Micrometers, • Gauges, Protractors, Coating Thickness Meters If you’re energized by precision work and cross-functional collaboration, this role offers an opportunity to make an immediate, measurable impact on product quality and customer satisfaction.

Job Description Job Title: Technician, Processing Department: Production Master Department: Manufacturing Report to: Processing Value Stream Supervisor Effective Date: September 17, 2026 FLSA Exempt Status: Non-Exempt Company Overview: DreamFields is built on a bold mission: disrupting the industry through a lifestyle brand that blends cannabis, culture, and unforgettable moments. Driven by Jeeter, the nation's #1 pre-roll brand, we combine creative excellence with cutting-edge operations to build one of the most loved workplaces in cannabis. As we continue to scale nationally across the USA and internationally in Canada, our growing team is fueling the next chapter of DreamFields' success. Job Summary: The Processing Technician plays a crucial role in the cannabis production process, working alongside the Infusion team to manage all aspects of cannabis infusion and processing operations. This position is responsible for monitoring the quality and consistency of cannabis materials throughout various processing phases, ensuring that all products meet or exceed established quality standards. The role requires meticulous attention to detail in tracking, recording, and reporting inventory data, as well as a strong commitment to maintaining regulatory compliance with health and safety standards. The Processing Technician will also collaborate with other team members to uphold production efficiency, cleanliness, and accurate documentation. As a key part of the production team, this role directly supports the company's goals of producing high-quality, innovative products while maintaining a safe and compliant work environment. Duties/Responsibilities: • Monitor cannabis material during processing phases., • Maintain electronic and paper logs for accurate weighing, tracking, and reporting of all inventory., • Input data and manage the flow of production., • Clean production areas to prevent cross-contamination and ensure compliance with local and state health regulations., • Conduct visual inspections to ensure the product meets or exceeds quality standards., • Follow appropriate quality control measures and in-process checks., • Perform other duties as assigned. Required Skills/Abilities: • Proficiency in computer programs such as MS Office and METRC, among other systems., • Ability to perform basic mathematical calculations for proper batch formulation., • Keen attention to detail., • Excellent verbal and written communication skills., • Ability to perform under pressure and prioritize tasks effectively. Education and Experience: • Must be at least 21 years old., • 1+ years of manufacturing experience with a focus on inventory tracking, product safety, consumer safety, and maintaining high product quality., • Professional kitchen or baking experience is preferred. Physical Requirements: • Respiratory Fit Test, • Completion of a two-part evaluation for respiratory clearance:, • Part 1: A written health questionnaire to evaluate your medical history and eligibility for respirator use., • Part 2: A respiratory fit test to ensure proper fit and functionality of the equipment required for this position., • Please note that both parts of this evaluation must be successfully completed to qualify for this position. Failure to meet the requirements of either part will disqualify you from this role. However, you may still be considered for other positions within the company., • Comfortable working in industrial environments with exposure to noise, dust, heat, cold, and other manufacturing conditions., • Ability to stand, walk, bend, and perform repetitive physical tasks for extended periods., • Must be physically capable of sitting or standing for long periods or entire shifts., • Ability to lift, carry, push, and pull objects weighing up to 50 pounds unassisted. Work Schedule (Non-Exempt): This position is scheduled on a full-time basis. Specific shift times and workdays are determined by the operation and may vary by location. Business needs may require work on evenings, weekends, and holidays, as well as occasional overtime. Scheduled start and end times, assigned shifts, and workdays are subject to change based on staffing and operational requirements. Whenever feasible, advance notice of schedule changes will be provided. Allergen Info: Positions in our production facilities may lead to regular exposure to cannabis plant material, dust, and other potential allergens. Individuals with sensitivity to pollen, molds, or strong odors may experience discomfort. Appropriate personal protective equipment (PPE) is provided and required. EEOC: DreamFields is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. All candidates must be willing to submit to a background check to be considered for the position.

Job Description General Function In this hands-on Tooling supervisor role, you'll support a skilled team, oversee preventive maintenance activities, and drive quality, safety, and continuous improvement initiatives. Ideal candidates will bring Tool & Die experience, strong problem-solving skills, and a passion for manufacturing excellence. Who we are At Amsted Automotive, we’re more than just a company—we’re a community of innovators, creators, and dedicated professionals who take pride in our work and each other. As an employee-owned organization, every team member has a vested interest in our success and shares in our achievements. This unique ownership culture fosters a collaborative, supportive environment where your ideas and contributions truly matter. Come join us and be part of a dynamic team that’s transforming the industrial and automotive industries while shaping the future of mobility! Duties and Responsibilities • Maintain education matrix(s) and associated records demonstrating compliance to the IATF Management system, • Adapt and promote Lean Manufacturing principals using 5”S” and Kaizen, • Support the Company’s Goals and Objectives through continuous improvement action plan participation and completion, • Supervise and schedule the daily preventative maintenance activities in the Tool Room, • Maintain employee compliance of 5”S” requirements at assigned areas in Tool Room, • Provide Job Instruction for the following:, • Maintain required safety levels on plant floor, • Ensure that production requirements are satisfied, • Ensure that Company policies and procedures are followed and adhered to, • Problem Solving and Root Cause Analysis, • Quality requirements: Authorized to make decisions concerning quality issues in tandem with the assigned Program Manager, • Supervises the daily activities of the Toolmakers and Metal Forming Specialists Employees, • Works closely with the General Production Supervisor to optimize stamping operations, • May give direction to members of the Press Team, • Serves in the capacity of waste water handler commensurate with completion of proper environmental training, • Other duties as assigned by the Tooling Manager Work Requirements: Knowledge and Skills • Must demonstrate proficiency in Blueprint GD&T interpretation of dies, details, and part prints, • Must be able to interpret C.M.M. or Gaging information and direct personnel to perform adjustments to maintain Customer part Quality, • Usage of a computer and other productivity machinery such as control panels, • Must possess working knowledge of Excel, Word, and PowerPoint software, • Possess working knowledge of IATF16949, ISO 14001, and Q1 compliance criteria to maintain manufacturing environmental standards to protect and preserve our customers product and the environment Education • High school diploma or GED, • Some college and/or technical trade manufacturing education is preferred Experience • Journeyman status or eight years’ experience in Tool and Die build, Prototype, or Die Repair Technician What’s in it for you We create a supportive environment where employees thrive! With a range of benefits designed to enhance your health, well-being, and financial security, we’re here to support you every step of the way. Join us and experience the exceptional perks that make Amsted automotive a great place to work! Health and wellness • Medical insurance, • Dental and vision insurance, • Prescription drug benefits, • Wellness reimbursement, • Telehealth, • Onsite health screenings, • Mental health resources, • Employee assistance program that includes counseling and support services for mental health, family support, financial advice, legal guidance, and more Financial benefits • Competitive salaries, • Employee stock ownership plan, • Annual bonus opportunity, • 401k with company match, • Health savings account with company contribution, • Life and disability insurance Work-life balance • Paid time off, • Parental leave, • 14 annual company paid holidays Professional development • Training programs, • Education expense reimbursement, • Career advancement opportunities Additional benefits • Pet insurance and discount program, • Legal insurance, • Employee discounts, • Recognition and rewards, • Community involvement, • Workplace giving matching gift program

Job DescriptionPlasma Spray Technician (Direct Hire) Warren, MI | 1st Shift | Up to $22.00/hour Our client, a leading aerospace manufacturer, is seeking a Plasma Spray Technician to join their team in a direct-hire opportunity. This is an excellent opportunity for someone with plasma spray experience or a mechanically inclined individual who is eager to learn a specialized trade in the aerospace industry. Responsibilities Set up and operate plasma spray equipment to apply coatings that meet engineering and customer specifications. Mask and grit blast components to prepare surfaces for coating. Interpret work orders, engine manuals, blueprints, and technical documents to determine proper processing requirements. Adjust spray flow, speed, and other operating parameters to ensure high-quality coating application. Partner with Engineering to develop plasma spray programs, establish process parameters, and support new product development. Assist with tooling improvements and process enhancements. Ensure proper fixtures, tools, and materials are available to meet production schedules. Maintain a safe, clean, and organized work area while following quality and safety standards. Qualifications High school diploma or GED required. 3+ years of plasma spray experience preferred; aerospace experience is a plus. Experience with robotic plasma spray systems, including Sulzer Metco MultiCoat Spray Systems and ABB 2400 Series Robots, is highly desirable. Ability to read and interpret blueprints, technical drawings, and manufacturing documentation. Strong math skills and mechanical aptitude. Excellent attention to detail, communication, and problem-solving skills. Ability to multitask in a fast-paced manufacturing environment. Don't meet every qualification? If you have a strong mechanical background, a positive attitude, and a willingness to learn a new trade, we encourage you to apply. What We Offer Direct-hire opportunity 1st Shift schedule Competitive pay up to $22.00/hour Excellent benefits Stable, growing aerospace manufacturing environment Long-term career advancement opportunities If you're looking to build a career with a respected aerospace manufacturer while learning a highly specialized skill, we'd love to hear from you! Pay Details: $18.00 to $22.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Position: Process Technician Location: Fraser, MI Company: Standex Engraving Status: Full-time, non-exempt Reports to: Production Management SummaryThe Process Technician is responsible for developing, optimizing, and sustaining manufacturing processes for automotive interior components within a high-tech soft trim and injection molding facility. This role bridges production, maintenance, and quality by ensuring machines, molds, and processes operate at peak efficiency to produce high-quality parts that meet automotive standards. The Process Technician plays a critical role in process setup, troubleshooting, continuous improvement, operator training, and supporting plant startup and ramp-up activities.Required Job Duties • Set up, start, and adjust injection molding and soft trim manufacturing processes to meet production and quality requirements., • Establish, monitor, and maintain process parameters to ensure consistent part quality and cycle efficiency., • Troubleshoot process, material, and equipment issues; implement corrective actions to minimize scrap and downtime., • Perform and support mold changes, machine setups, and tooling adjustments., • Own Efficiency tracking and reporting metrics at the floor-level, • Perform routine maintenance tasks including machine lubrication, filter changes, minor repairs, and general upkeep of equipment and tooling to ensure operational readiness., • Conduct basic mechanical repairs and handyman-type tasks (e.g., replacing worn components, adjusting fixtures, tightening fittings) to support uninterrupted production., • Analyze production data (scrap rates, cycle times, downtime) to identify and implement process improvements., • Investigate and resolve quality defects by performing root cause analysis and implementing corrective and preventive actions, working closely with quality teams to disposition nonconforming parts., • Support first-article inspections, in-process quality checks, and process capability studies to maintain dimensional and cosmetic standards., • Conduct root cause analysis and implement corrective and preventive actions., • Collaborate with maintenance to resolve equipment issues and improve reliability., • Ensure processes comply with automotive quality standards (IATF 16949, ISO 9001)., • Develop and maintain process documentation, including setup sheets, work instructions, and parameter controls., • Support new product launches, including process validation and PPAP/APQP activities., • Train and mentor production operators on process control, setup procedures, quality inspection methods, and troubleshooting basics; provide hands-on coaching at the machine level to build operator capability and reduce dependency on engineering support., • Assess operator skill gaps and provide refresher training when process deviations or recurring errors are identified., • Maintain accurate records of process changes, trials, and production performance., • Follow all safety procedures and maintain a clean, organized work environment.Required Qualifications, • High school diploma or GED required., • Minimum of 3 years of experience in injection molding and/or automotive soft trim manufacturing., • Demonstrated experience in process setup, troubleshooting, and optimization in a production environment, • Ability to work required shifts, overtime, and maintain reliable attendance., • Ability to lift up to 50 lbs and work in a manufacturing environment.Required Knowledge, Skills, and Abilities, • Knowledge of plastic materials, molding processes, and soft trim manufacturing techniques (e.g., lamination, edge folding)., • Ability to set and adjust process parameters for injection molding equipment., • Strong troubleshooting skills across mechanical, hydraulic, pneumatic, and basic electrical systems., • Hands-on mechanical aptitude with the ability to perform minor equipment repairs, component replacements, and general facility/equipment upkeep., • Understanding of process control methods and data analysis (e.g., scrap, cycle time, efficiency)., • Familiarity with automotive quality systems (IATF 16949, PPAP, APQP) and quality tools such as 8D, 5-Why, and fishbone/Ishikawa diagrams., • Ability to read and interpret engineering drawings, work instructions, and technical documents., • Demonstrated ability to train and coach production operators with patience, clarity, and technical depth., • Strong attention to detail and commitment to quality and safety standards., • Ability to work independently and collaborate with cross-functional teams., • Effective verbal and written communication skills. Physical Requirements: • This position requires a moderate to high degree of standing, walking, stooping, crouching, bending or kneeling, close eye work, reaching, pulling or pushing. Good hand dexterity, hearing, and vision are considered essential. Moderate to Steady lifting of up to 50lbs. required. Requires wearing personal protective equipment. Powered by JazzHR IgaCalM4Rd

Job Description Job Title: Technician, Production Department: Production Master Department: Manufacturing Report to: Production Value Stream Supervisor Effective Date: August 21, 2026 FLSA Exempt Status: Non-Exempt ScheduleHoursWorkdaysWageSchedule Expectations4x10 – 1st Shift4:00 AM–2:30 PMMonday–Thursday$16.00/hourMandatory 8-hour Friday work through Thanksgiving; Saturday work is unlikely *Candidates must be able to meet the schedule expectations associated with their selected schedule. Schedule availability is subject to business needs. Company Overview: DreamFields is one of the top five cannabis companies in the industry through our leading #1 pre-roll brand, Jeeter. We are passionate about producing world-class marketing, high-quality, innovative products, delivering exceptional customer experiences, operating cutting-edge processes, and fostering an amazing company culture and thriving work environment. With over 1,500 employees, we are proud to be one of the most loved employers in the industry. DreamFields continues to experience exponential growth as one of the fastest-growing companies in the cannabis industry, aggressively expanding nationally into all legalized cannabis states. Job Summary: Cannabis Production Technicians are directly involved in manufacturing our products from the initial stages to final sale-ready units that will be distributed to dispensaries throughout the state and ultimately into the hands of our customers who enjoy our top-of-the-line branded products. Duties/Responsibilities: • Manipulating flower and oil., • Weighing, stuffing, and rolling products., • Labeling, stickering, and packaging finished goods., • Required to hit specific cycle times in each position., • Required to work in a high-volume manual production assembly line and achieve both individual and team performance goals. Required Skills/Abilities: • Must be at least 21 years old, as required by state law., • Ability to work well with others and independently., • Ability to learn and adapt to various strains, styles, and types of cannabis., • Ability to manage time in a fast-paced environment to meet goals without sacrificing quality., • Ability to maintain a high standard of health and hygiene as required by OSHA., • Ability to follow instructions and be receptive to feedback/coaching from the management team to maintain product quality. Education and Experience: • HS Diploma or GED required., • 1+ years of experience in a production or manufacturing position., • 1+ years of experience in manufacturing consumable goods is preferred., • Must have working knowledge of GMP (Good Manufacturing Practices). Physical Requirements: • Ability to lift, carry, push, and pull objects weighing up to 50 pounds unassisted., • Comfortable working in industrial environments with exposure to noise, dust, heat, cold, and other manufacturing conditions., • Ability to stand, walk, bend, and perform repetitive physical tasks for extended periods., • Must be physically capable of sitting or standing for long periods or entire shifts., • Must be capable of repetitive motion using hands and arms., • This position requires frequent use of both hands and fingers to perform fine motor tasks, including handling product, assembling packaging, and applying compliance labels. Applicants must be able to perform these essential job functions with or without reasonable accommodation. Work Schedule (Non-Exempt): This position is scheduled on a full-time basis. Specific shift times and workdays are determined by the operation and may vary by location. Business needs may require work on evenings, weekends, and holidays, as well as occasional overtime. Scheduled start and end times, assigned shifts, and workdays are subject to change based on staffing and operational requirements. Whenever feasible, advance notice of schedule changes will be provided. Allergen Info: Positions in our production facilities may lead to regular exposure to cannabis plant material, dust, and other potential allergens. Individuals with sensitivity to pollen, molds, or strong odors may experience discomfort. Appropriate personal protective equipment (PPE) is provided and required. EEOC: DreamFields is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. All candidates must be willing to submit to a background check to be considered for the position.

Job Description Responsibilities: • Provide problem solving, analysis, training, coaching related to safety & ergonomic improvements, • Coordinate 5PB of accidents at work; ensure corrective actions are developed and implemented effectively and in a timely manner, • Develop action plans and conducting follow-up internal and external safety audits to address all plant Safety issues and adherence to applicable policies and procedures, legal requirements; ensure corrective safety actions are developed and implemented, • Coordinate the activities of health and safety at work with the activities of other functional areas of business, • Coordinate 5S audits, ensure corrective actions are developed and implemented, • Selecting the correct personal protective equipment according to the existing risks ensuring proper and effective control/monitoring of costs, • Ensuring the involvement of all associates in the culture of zero accidents and promote incident reporting policy, • Practice safe working techniques and re-enforce safety policy, guidelines, safety rules, procedure and all legally required legislation. Providing direction and support on all safety compliance inquiries., • Advise management on all legislative changes and new legal requirements., • Safety advisor and mentor to associates and management in solving problems that impact safety in the workplace, • Collect data, maintain records and manage filing systems for Health & Safety, according internal procedures and legal requirements, • Create and review daily, weekly, monthly, and annual safety reports, as required in order to analyze critically all possible causes and severity of working accidents and diseases and define the preventive and corrective actions, • Participate actively in the definition of new equipment's/tools (phase project) in order to assure all legal safety requirements and ergonomics best practices, also participate actively in the reception and acceptance of them, • Implement, coordinate, control and assure all actions/activities required by PDSSMA (Director Plan for Health, Safety & Environment), • Develop, facilitate, schedule and coordinate safety training sessions according to legal and Client programs requirements, • Responsible to assure that the subcontractors that execute working activities in BU are aware and informed about the specific risks, health and Safety policies and procedures to be followed, • Stop any Business Unit activity which endangers the health or physical integrity of associates or third parties and immediately communicate this decision to EUN and HR&S Manager. Requirements: • Solid working knowledge of risk analysis and emergency response planning, • Ability to develop & deliver effective training according to Internal programs and plans and legal requirements, • Solid working knowledge of accident and incident investigation processes and requirements, • Knowledge of principles of ergonomics in an industrial setting, • Knowledge and understanding of safety processes, procedures, systems and legal requirements., • Solid working knowledge of OSHAS 18001, • Solid working knowledge of OSHAS 14001, • Solid working knowledge of 5S Methodology, • Knowledge and understanding of environmental processes, procedures, systems and legal requirements. Experience: • 3 yrs. of manufacturing related experience with hands on operational knowledge (preferably practical experience in automotive industry manufacturing environment), • Safety technician experience is a plus, • Experience working in an organization that has a well-implemented "Safety Culture” is a plus. Education: • Bachelor degree or College education in safety engineering, industrial engineering, management or similar, • Certified Safety training according to local legal requirements We offer attractive, competitive compensation and benefits including, medical, dental, 401k, short-term disability, AD&D, tuition reimbursement, and more. If you take pride in your work and are committed to personal and professional success, let's talk. Please visit www.zobility.com to learn more. Zobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India.

Job DescriptionOn-Board Services is hiring a Laboratory Testing Technician in Madison Heights, MI For immediate consideration please send your resume to resumes@onboardusa.com Subject Line: Position Title and State you are located About Us: On-Board Services, Incorporated is an on-site contract service provider for a local manufacturing entity providing full-time positions to our employees. We offer benefits as well as 401k. Position Details: Title: Product Stewardship Coordinator8/ Position Type: 1-Year contract with additional opportunity contingent upon performance and continued business need Job Location: Madison Heights, MI Shift: 1st Benefits: 401K, Dental insurance, Life Insurance, Medical Insurance, Vision Insurance, PTO Compensation: $25-$27/HR/HR About Us: On-Board Services, Incorporated, is an on-site contract service provider for a local manufacturing entity, providing full-time positions to our employees. We offer benefits as well as the opportunity to work with a great team! Responsibilities • Operate and maintain laboratory testing equipment according to established test methods and parameters, including performing basic equipment maintenance., • Prepare and enter samples for testing, perform evaluations, and assign ratings in accordance with established procedures., • Accurately collect, record, and enter test data while maintaining quality standards and completing required checks and verifications., • Use computer software to enter data and generate test reports., • Maintain a clean, organized, and safe laboratory work environment.Qualifications, • Associate’s or bachelor’s degree in a science or technical field preferred., • 1–2 years of laboratory experience required., • Proficiency in Microsoft Office applications, including Word, Excel, and PowerPoint., • Experience handling basic laboratory tools and equipment, including mixing equipment, laboratory glassware, calipers, and other standard lab tools., • Strong mathematical, written, and verbal communication skills., • Detail-oriented, organized, and self-motivated, with the ability to work independently and collaboratively in a team environment., • Ability to manage multiple tasks and priorities in a fast-paced environment., • Ability to stand for most of the workday in a laboratory setting., • Ability to lift parts weighing up to 20–30 pounds in and out of testing chambers. www.onboardusa.com Apply Today! On-Board was founded in 1976 by Robert L. Wilson to provide Engineering and Design services to the chemical manufacturing industry. Today, On-Board is a thriving privately held family of companies with services including: Consulting, Professional Engineering, Industrial Maintenance and Facility Management, Contracted Manufacturing and Production Services, as well as Temporary Staffing and Recruiting throughout North America. The On-Board Family of Companies conducts operations through its Corporate Headquarters located in East Windsor, NJ along with Regional Offices in New Castle, DE and Wake Forest, NC. On-Board’s Mission is to provide “Flexible Service by applying the talents of our people, work processes and technology to meet our clients’ expectations in a Safe, Responsible and Dependable manner.” On-Board Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, sex, national origin, age, disability or genetics. JD# 26-01577

Job Description Job Title: Technician, Production Department: Production Master Department: Manufacturing Report to: Production Value Stream Supervisor Effective Date: August 21, 2026 FLSA Exempt Status: Non-Exempt ScheduleHoursWorkdaysWageSchedule Expectations4x10 – 2nd Shift3:00 PM–1:30 AMMonday–Thursday$16.50/hourMandatory 8-hour Friday work through Thanksgiving; Saturday work is unlikely *Candidates must be able to meet the schedule expectations associated with their selected schedule. Schedule availability is subject to business needs. Company Overview: DreamFields is one of the top five cannabis companies in the industry through our leading #1 pre-roll brand, Jeeter. We are passionate about producing world-class marketing, high-quality, innovative products, delivering exceptional customer experiences, operating cutting-edge processes, and fostering an amazing company culture and thriving work environment. With over 1,500 employees, we are proud to be one of the most loved employers in the industry. DreamFields continues to experience exponential growth as one of the fastest-growing companies in the cannabis industry, aggressively expanding nationally into all legalized cannabis states. Job Summary: Cannabis Production Technicians are directly involved in manufacturing our products from the initial stages to final sale-ready units that will be distributed to dispensaries throughout the state and ultimately into the hands of our customers who enjoy our top-of-the-line branded products. Duties/Responsibilities: • Manipulating flower and oil., • Weighing, stuffing, and rolling products., • Labeling, stickering, and packaging finished goods., • Required to hit specific cycle times in each position., • Required to work in a high-volume manual production assembly line and achieve both individual and team performance goals. Required Skills/Abilities: • Must be at least 21 years old, as required by state law., • Ability to work well with others and independently., • Ability to learn and adapt to various strains, styles, and types of cannabis., • Ability to manage time in a fast-paced environment to meet goals without sacrificing quality., • Ability to maintain a high standard of health and hygiene as required by OSHA., • Ability to follow instructions and be receptive to feedback/coaching from the management team to maintain product quality. Education and Experience: • HS Diploma or GED required., • 1+ years of experience in a production or manufacturing position., • 1+ years of experience in manufacturing consumable goods is preferred., • Must have working knowledge of GMP (Good Manufacturing Practices). Physical Requirements: • Ability to lift, carry, push, and pull objects weighing up to 50 pounds unassisted., • Comfortable working in industrial environments with exposure to noise, dust, heat, cold, and other manufacturing conditions., • Ability to stand, walk, bend, and perform repetitive physical tasks for extended periods., • Must be physically capable of sitting or standing for long periods or entire shifts., • Must be capable of repetitive motion using hands and arms., • This position requires frequent use of both hands and fingers to perform fine motor tasks, including handling product, assembling packaging, and applying compliance labels. Applicants must be able to perform these essential job functions with or without reasonable accommodation. Work Schedule (Non-Exempt): This position is scheduled on a full-time basis. Specific shift times and workdays are determined by the operation and may vary by location. Business needs may require work on evenings, weekends, and holidays, as well as occasional overtime. Scheduled start and end times, assigned shifts, and workdays are subject to change based on staffing and operational requirements. Whenever feasible, advance notice of schedule changes will be provided. Allergen Info: Positions in our production facilities may lead to regular exposure to cannabis plant material, dust, and other potential allergens. Individuals with sensitivity to pollen, molds, or strong odors may experience discomfort. Appropriate personal protective equipment (PPE) is provided and required. EEOC: DreamFields is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. All candidates must be willing to submit to a background check to be considered for the position.

Job DescriptionDescription: Are you detail-oriented, hands-on, and interested in building your skills in manufacturing quality and continuous improvement? We’re looking for a Quality Technician who takes initiative, embraces new technology, and is willing to learn and put in the work to help improve our quality processes. In this role, you’ll support quality assurance, dimensional inspection, metrology, documentation, and continuous improvement across our manufacturing operations. You’ll work closely with the quality and production teams to investigate nonconformances, maintain quality records, ensure products meet customer specifications, and identify opportunities to improve processes. The ideal candidate is motivated, adaptable, and eager to take ownership of their work while continuing to develop their technical skills.. Requirements: What You Will Do • Support Quality Management Systems: Enter and maintain accurate records for nonconformances (NCs), return material authorizations (RMAs), and vendor returns (VRs) within quality management systems (QMS) and enterprise resource planning (ERP) software., • Perform Dimensional Inspection and Metrology: Operate and program coordinate measuring machines (CMMs) to inspect components, verify dimensions, and ensure conformance to engineering drawings and specifications., • Maintain Measurement Equipment: Perform and document gage calibration, verification, and measurement equipment checks to support accurate and reliable inspection results., • Support Customer Quality Requirements: Review orders for customer terms, specifications, and quality requirements. Assist with customer communication regarding quality concerns, corrective actions, and compliance documentation., • Maintain Quality Documentation: Create and update balloon drawings, inspection plans, inspection reports, and test documentation to support manufacturing and quality processes., • Participate in Audits and Corrective Actions: Assist with internal audits, document findings, and support corrective and preventive actions to maintain compliance with ISO 9001 and company quality standards., • Drive Continuous Improvement: Identify quality concerns, investigate potential process improvements, and contribute ideas to reduce defects, improve efficiency, and strengthen quality systems., • Support Production Quality: Work alongside Quality Inspectors to assist with daily inspection activities and cross-train in additional inspection responsibilities as needed., • Take Initiative: Learn new technologies, adapt to evolving processes, and take ownership of assigned projects and responsibilities., • Perform other duties as assigned. What You Will Accomplish You will help ensure that products consistently meet customer expectations, engineering specifications, and established quality standards. Through accurate inspections, reliable documentation, and proactive problem-solving, you’ll help reduce defects, improve manufacturing processes, and support customer satisfaction. You’ll also have the opportunity to expand your technical capabilities and contribute to the continued development of our quality management system. You Will Achieve This By • Taking initiative to identify issues, ask questions, and follow through on solutions., • Being willing to learn new inspection methods, quality systems, and manufacturing technologies., • Applying strong attention to detail when inspecting components, reviewing drawings, and maintaining records., • Working collaboratively with Quality, Engineering, Production, and other departments., • Adapting to changing priorities while maintaining accuracy, organization, and accountability., • Continuously looking for ways to improve quality, efficiency, and consistency. What You Bring to the Team • An associate degree or technical certification in Quality, Manufacturing, Engineering, Metrology, or a related field is preferred., • At least 2 years of experience in manufacturing quality, quality assurance, dimensional inspection, or a related role., • Working knowledge of coordinate measuring machines (CMMs), CMM programming, and dimensional metrology., • Familiarity with engineering drawings, geometric dimensioning and tolerancing (GD&T), inspection methods, and measurement tools., • Understanding of ISO 9001, quality management systems (QMS), nonconformance reporting, and corrective action processes., • Proficiency in Microsoft Office and the ability to learn ERP, QMS, and other quality-related software., • Strong attention to detail, organizational skills, and written and verbal communication abilities., • A proactive mindset, willingness to learn, and commitment to developing new skills., • The ability to work independently while contributing to a collaborative team environment.

Job Description Qualifications: • Minimum bachelor's degree in Food Science, Biology, Microbiology, or a related science, or equivalent experience., • HACCP certified; SQF Practitioner preferred., • Knowledge of microbiological, physical, chemical, and organoleptic testing., • Ensure Safeway policies, procedures, and workplace safety are adhered to., • Implement plant sanitation programs as directed by Quality Management., • Evaluate trends from test results, develop plans to correct deficiencies, and communicate these plans to employees and management., • Implement quality control processes/testing to meet Safeway quality standards and ensure products are within specification., • Excellent organizational skills with a high degree of initiative and flexibility., • Strong analytical and problem-solving skills., • Utilize and maintain inventory of laboratory and sanitation supplies., • Strong oral and written communication skills., • Ability to multi-task in a fast-paced environment with limited supervision., • Proficient in Windows-based PC programs., • Experience with lab test equipment and maintenance., • Knowledge of HACCP., • Must follow current Good Manufacturing Practices (GMPs), Good Sanitation Practices (GSPs), Food Safety, and Occupational Safety., • Ability to lift up to 50 lbs. Responsibilities: Key responsibilities include, but are not limited to: • Responsible for sampling, testing, plating, reading, and recording product test results., • Ensure daily records are kept and maintained., • Perform data entry, tracking, and interpretation., • Follow QC Hold Procedures for out-of-specification products., • Must possess the ability to follow Standard Operating Procedures (SOPs)., • Assist in maintaining a 5-S rating of "A "., • Be flexible with working hours., • Perform equipment calibration and troubleshooting., • Carry out other duties as assigned., • Participate in continuous improvement initiatives., • Meet with the supervisor daily to discuss any production-related issues., • Monitor all Critical Control Point (CCP) records and frequencies., • Follow up on customer complaints and correspond with production teams., • Manage product specifications., • Coordinate the HACCP team., • Maintain and implement policies and procedures, including training related to GMPs, Food Safety, and regulatory compliance., • Demonstrate exceptional attention to detail and strong organizational skills., • Adapt effectively within a continually changing and demanding environment., • Communicate effectively to maintain high levels of safety, quality, and efficiency., • Manage multiple tasks and duties related to food safety and regulatory compliance.

Job Description ???? About Quickparts Quickparts is passionate about powering the world's product continuum. We provide end-to-end manufacturing solutions including CNC machining, injection molding, and 3D printing, serving thousands of customers in the fields of mobility, aerospace, medical devices, and Defense. Our mission is to accelerate innovation by delivering precision-engineered parts that meet the highest standards of quality and reliability. ???? Job Summary Quickparts seeks a skilled Process Technician to set up and operate machines that shape plastic and other materials through injection molding. In this role, you'll work in our manufacturing facility preparing machines for production runs, ensuring quality output, and maintaining efficient operations. If you're detail-oriented with strong technical skills and experience in plastic processing, join our team to help deliver precision-engineered components. ???? Key Responsibilities 1. Technical Machine Operation • Utilize numerically controlled injection molding equipment to perform operations on various plastic resin materials, • Set up and operate job-related equipment including molding machines, lift trucks, and overhead cranes, • Establish and follow set-up sheets and loading process parameters for optimal production, • Monitor process and cycle times to maintain quality and maximize product output 1. Quality Control & Troubleshooting • Diagnose and correct problems in set-up and operations of molds, presses, and other equipment, • Identify when parts are produced improperly or when machines malfunction and alert supervision, • Operate precision measuring instruments to maintain accurate dimensional tolerances per specifications, • Maintain thorough knowledge of industry machinery, techniques, and safety regulations 1. Production Support & Documentation • Follow job specifications and design criteria, including verbal instructions for each order, • Maintain accurate production and scrap records for all processed materials, • Count, package, and label shipment boxes according to work instructions, • Use scales for counting parts and weighing boxes for shipment, • Maintain an organized and clean work area adhering to safety policies ???? Qualifications • High school diploma or equivalent required, • Minimum 2 years of related experience in injection molding set-up and processing, • Experience with plastic processing, system operation, and different plastic materials, • Proficiency with micrometers, calipers, and other measurement tools, • Ability to operate overhead cranes and hi-lo equipment, • Skill in reading prints and technical specifications, • Basic math and computer skills, • Strong analytical and problem-solving abilities, • Knowledge of injection molding process validations and quality control, • Demonstrated mechanical and electrical knowledge with hands-on technical skills ???? Celebrate Your Strengths! We believe that understanding your natural behavioral style helps ensure success for both you and Quickparts. As part of our application process, we invite you to complete a quick, six-minute assessment. This brief assessment highlights your unique strengths and how they align with our role requirements—providing valuable insights to spark great conversations about your fit, growth, and development here at Quickparts. Please begin the assessment by clicking the link below: Quickparts Assessment ???? Why Join Quickparts? • Innovate with Impact: Contribute to manufacturing solutions for Fortune 500 clients and startups alike., • Growth-Driven Culture: Access ongoing training, certifications, and career advancement in advanced manufacturing., • Customer-Centric Mission: Help create solutions that exceed expectations and redefine industry standards., • Collaborative Team: Join experts passionate about precision, efficiency, and sustainable manufacturing. ???? Apply Now! Ready to join the next wave of manufacturing innovation? Submit your resume highlighting your experience in injection molding operations. ???? SEO Keywords: Injection Molding Operator, Plastic Processing, Manufacturing Operations, Quality Control, Technical Machine Operation, Production Support ✨ Shape the Future of Manufacturing with Quickparts – Apply Today!

Job Description We are on a mission to grow Second Nature Brands to $1+B in the next 2 years through a combination of organic growth (increased distribution, e-commerce, and innovation) and through M&A. We have an opening for a Quality Assurance Technician position, who will be an important member of the supply chain team during this growth. This position will be based out of our Kar’s Nuts Products facility located at 1200 East 14 Mile in Madison Heights, Michigan. This role ensures that all products meet company and regulatory quality and safety standards. This role involves monitoring production processes, conducting inspections and tests, and supporting continuous improvement initiatives to maintain compliance with food safety regulations. In addition, assist operations by managing the movement, storage, and distribution of finished goods. This role is essential in ensuring production runs smoothly and efficiently while maintaining food safety standards. Regular working hours are Monday through Friday shift 3p - 11p weekday or weekend overtime as needed. The starting rate is $18.00/hr plus $1.00 shift premium per hour. Essential duties and responsibilities include: • Ensure that product is being made according to specifications by measuring and testing raw and finished products utilizing basic laboratory equipment., • Place non-conforming products on hold for further inspection and disposition as needed., • Check various measurements in accordance with SQF requirements and standards., • Perform visual inspections and ATP swabs on equipment post sanitation., • Perform Good Manufacturing Practice (GMP) audits and monitor adherence to GMPs while on the production floor., • Effectively communicate any issues to appropriate personnel (Packers, production, maintenance, etc.), • Complete accurate QA documentation using basic computer skills., • Follow all GMP (Good Manufacturing Practices), Q&FS (Quality & Food Safety), and OSHA Safety policies., • Maintain a clean and safe work area., • Perform additional duties as assigned. Qualifications and Education Requirements • 18 years of age or older., • High School diploma or equivalent., • Basic math skills., • Calculator and computer proficiency., • English language proficiency., • Self-directed., • Ability to work well with peers and supervisors., • Good oral and written communication skills., • Must be detail oriented, have good organizational skills, ability to follow directions and be able to work independently., • Minimum 1-year previous food safety and quality assurance experience (Preferred) Work Environment • While performing the duties of this job, you will regularly work near moving mechanical parts. The noise level in the work environment can be high and employee may be required to wear personal protective equipment. This is an indoor food manufacturing setting. ADDITIONAL NOTES: • This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned, at any time with or without notice. This is a full-time position that includes a comprehensive benefit package including paid time off, employee discount, medical, dental, disability and life insurance and a 401(k) plan with company match! We are an equal employment opportunity employer. Second Nature Brands is a leading U.S. manufacturer of premium and better-for-you snacking and treat products. Our brands include Kar's®, Second Nature® Sanders ®, Brownie Brittle®, Sahale®, and Voortman®. Check out our website at http://www.secondnaturebrandsus.com/ to see how Second Nature Brands is creating snacks and treats that make lives better, naturally.

Job Description JOB DESCRIPTION Machine Service Technician – Manufacturing Facility Company: INU PAK, LLC Location: Highland Park, Michigan Department: Maintenance & Production Position Type: Full-Time Reports To: Plant Manager / Operations Manager POSITION SUMMARY INU PAK, LLC is seeking an experienced, dependable, and highly skilled Machine Service Technician to maintain, troubleshoot, repair, install, and service industrial manufacturing equipment. The ideal candidate will have strong mechanical, electrical, pneumatic, and hydraulic troubleshooting skills, with experience working on automated production lines, industrial presses, and aluminum foil container manufacturing machinery. The Machine Service Technician will be responsible for ensuring that all production equipment operates safely, efficiently, and with minimal downtime. KEY RESPONSIBILITIES 1. Machine Maintenance & Repairs • Perform preventive and corrective maintenance on manufacturing machinery., • Diagnose and repair mechanical, electrical, hydraulic, and pneumatic equipment failures., • Troubleshoot industrial presses, automated feeders, stackers, compressors, conveyors, and production equipment., • Replace defective components, motors, sensors, bearings, belts, valves, and electrical parts., • Minimize machine downtime and ensure continuous production operations., • Conduct regular inspections to identify potential equipment failures. 1. Electrical & Mechanical Troubleshooting • Troubleshoot electrical control panels, wiring, relays, contactors, sensors, and motor controls., • Diagnose and repair PLC-controlled machinery and automated systems., • Read and interpret electrical schematics, mechanical drawings, and equipment manuals., • Troubleshoot variable frequency drives (VFDs), motors, and industrial automation components., • Repair and maintain hydraulic pumps, cylinders, valves, and pneumatic systems., • Perform machine adjustments, calibrations, and alignment. 1. Production Equipment Setup & Operation • Assist with installation, assembly, and commissioning of new production machinery., • Set up and adjust production machines for different product sizes and specifications., • Assist with mold and tooling changes on industrial press machines., • Ensure proper alignment and operation of molds, feeders, and stacking equipment., • Support machine operators in resolving production-related mechanical issues., • Optimize equipment performance, production speed, and product quality. 1. Preventive Maintenance • Develop and follow preventive maintenance schedules., • Lubricate, clean, inspect, and service machinery., • Monitor machine performance and identify early signs of equipment deterioration., • Maintain accurate maintenance records, repair reports, and equipment service logs., • Recommend replacement parts and maintain critical spare-parts inventory. 1. Safety & Compliance • Follow OSHA safety regulations and company safety procedures., • Perform lockout/tagout (LOTO) procedures before servicing equipment., • Maintain a clean and safe working environment., • Inspect machine guards, emergency stops, and safety systems., • Report unsafe operating conditions and recommend corrective actions. REQUIRED QUALIFICATIONS • Minimum 3 years of experience in industrial machine maintenance, mechanical repair, or manufacturing equipment servicing preferred., • Strong knowledge of industrial electrical, mechanical, hydraulic, and pneumatic systems., • Experience troubleshooting automated manufacturing equipment., • Ability to read electrical diagrams, technical manuals, and mechanical blueprints., • Experience working with industrial presses, compressors, motors, and production machinery., • Ability to use multimeters, diagnostic instruments, power tools, and precision measuring equipment., • Strong problem-solving skills and ability to work independently., • Ability to respond quickly to machine breakdowns and production emergencies., • Ability to communicate effectively with machine operators, supervisors, and management. PREFERRED EXPERIENCE Candidates with experience in the following areas will receive priority consideration: • Aluminum foil container manufacturing machinery., • High-speed aluminum press machines (60-ton, 80-ton, or similar)., • Automatic aluminum coil feeders and straighteners., • Pneumatic stackers and automated product handling systems., • Aluminum foil molds, dies, and tooling adjustments., • Scrap removal systems and industrial balers., • PLC programming and troubleshooting., • Industrial electrical installation and control panel maintenance., • Manufacturing production lines operating multiple shifts. PHYSICAL REQUIREMENTS • Ability to stand, walk, bend, kneel, and work around industrial machinery for extended periods., • Ability to lift up to 50 pounds independently., • Ability to work safely around moving machinery and high-voltage electrical equipment., • Ability to work in an industrial manufacturing environment., • Ability to perform maintenance during scheduled downtime and emergency breakdowns. WORK SCHEDULE • Full-time position., • Flexible schedule based on production requirements., • Occasional overtime, weekends, or emergency maintenance may be required., • Availability to support extended production hours and multiple shifts. PERFORMANCE EXPECTATIONS The Machine Service Technician will be evaluated based on: • Reduction of machine downtime and production interruptions., • Speed and accuracy of troubleshooting and repairs., • Completion of preventive maintenance schedules., • Machine reliability and operating efficiency., • Compliance with workplace safety requirements., • Proper documentation of repairs and maintenance activities., • Ability to support continuous manufacturing operations. COMPENSATION & BENEFITS Compensation: Competitive hourly wage based on experience and technical qualifications. Benefits: To be discussed during the hiring process. HOW TO APPLY Qualified applicants should submit their resume, relevant technical experience, and employment history. INU PAK, LLC 15815 Hamilton Ave Highland Park, MI 48203 EQUAL EMPLOYMENT OPPORTUNITY INU PAK, LLC is an equal opportunity employer. Employment decisions are based on qualifications, experience, and business needs without discrimination prohibited by applicable law.

Job Description Maintenance Technician Co. makes custom metal stampings Warren, MI 48089 Shift: 3pm to 11pm (Some OT available during the week and on weekends when required) Pay Range: $28.00–$30.00 per hour Job Responsibilities: • Perform custodial duties, groundskeeping, general maintenance, and minor repairs., • Assist with preventive maintenance and repairs to facility equipment., • Perform minor repairs to heat-treat equipment and install equipment as directed., • Operate standard shop tools, including hand and power tools, hoists, saws, drills, and wrenches, as well as precision measuring instruments and electrical testing devices., • Keep machinery, equipment, and surrounding areas clean and organized., • Perform building repairs and general facility maintenance., • Maintain accurate and thorough records of maintenance work performed., • Follow management direction and complete other duties as assigned., • Follow all company safety rules, procedures, and policies., • Perform general labor as assigned, including loading, unloading, and moving materials. Job Requirements: • Must have at least two years of general maintenance experience in a manufacturing facility., • Must have good communication skills, reliable attendance, and the ability to work as part of a team., • Must be able to squat, crawl, stand, and bend for extended periods., • Must be able to lift up to 50 pounds., • Must have forklift experience., • Must be at least 18 years old.\nCompany Description Job&Talent, is an international leader in professional, and manufacturing staffing. We provide temporary workers to a variety of industries needing a flexible and dynamic workforce. Why work with us? Because we promote the highest standards of integrity, quality, and mutual respect to our clients and staff. When you work with us, you are part of something and valued for your commitment and contributions to the goals of our clients. We commit to paying weekly and always put safety at the heart of everything. Are you interested in stable employment, competitive salaries, and growth opportunities? As part of the Jobandtalent family, we have reached over 10 countries, served over 2500 clients, and employed over 340,000 people. Join the world’s leading digital staffing agency today – We promise it’s worth a conversation to make a positive difference in your life! Let’s start your next job adventure together. Job&Talent, is proud to be an equal opportunity workplace and is an affirmative-action employer. We are committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Job&Talent, is an international leader in professional, and manufacturing staffing. We provide temporary workers to a variety of industries needing a flexible and dynamic workforce. Why work with us? Because we promote the highest standards of integrity, quality, and mutual respect to our clients and staff. When you work with us, you are part of something and valued for your commitment and contributions to the goals of our clients. We commit to paying weekly and always put safety at the heart of everything. Are you interested in stable employment, competitive salaries, and growth opportunities? As part of the Jobandtalent family, we have reached over 10 countries, served over 2500 clients, and employed over 340,000 people. Join the world’s leading digital staffing agency today – We promise it’s worth a conversation to make a positive difference in your life! Let’s start your next job adventure together.\r\n\r\nJob&Talent, is proud to be an equal opportunity workplace and is an affirmative-action employer. We are committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status.

Job DescriptionDescription: There are two positions for 3rd shift (11:00 p.m. - 7:30 a.m.) There is one position for 2nd shift (3:15 p.m. - 11:45 p.m.) Summary The CNC Setup Technician performs machine setups, troubleshooting machine processes, and assists machine operators with tool offsets and tool changes as necessary on assigned CNC machines. Functions Job Specific Responsibilities · Adjusts Tooling, Work Holding, and Part Stops to control stock and tool movements. · Troubleshooting of machine processing issues and working with Manufacturing Engineer Technicians or Maintenance Personnel when needed. · Monitor and ensure back up tooling and supplies are available at each machine or in inventory. · Review Machine and/or Work Center to ensure the required Tools (including PPE), Process Job Book, Plex access, and Raw Material(s) are correct and present. · Changeover of any Assigned Machine or Work Center by the proper removal and storage in the correct location of all previous Job Tooling, Process Job Book, Raw Material(s), and any other prior requirements. · Assist with the Training and Development of Machine Operators. · Work with Manufacturing and Process Engineering along with other Cross Functional Departments on Continuous Improvement Projects. · Maintain the cleanliness and organization of all cribs used for the job such as the Mill Crib, Lathe Crib, Maintenance Crib, and General Toolroom. · Operate Machines when necessary to support Production, Engineering, Maintenance, or Quality. General Responsibilities · Adhere to company policies and procedures. · Follow all safety and MIOSHA requirements. · Maintain a clean work environment. · Participate in training and meetings · Follow all company Quality, Environmental, Safety, and Standards of Conduct policies. · Report safety or quality concerns in a timely manner. · Understand and implement Drake Driven Core Values. Core Competencies · Basic math skills · Technical Experience · Time Management · Analytical Thinking · Attention to detail · Teamwork and Collaboration · Problem Solving · Safety Awareness · Results driven · Quality focus · Accountability · Initiative · Performs Well Under Pressure · Strong Communication Skills · Teamwork and Collaboration Position Type/Expected Hours of Work This is a full-time position (40 hours per week). Overtime may be required. Requirements: Eligibility Qualifications (Minimum) · High school diploma or graduation from a certified technical school preferred · Proven experience as a CNC Machinist · 2 years’ experience setting up CNC Mills and/or CNC Lathes · Ability to read blueprints · Understanding of production procedures Physical Requirements · Ability to lift up to 50 pounds · Ability to stand, walk, and perform repetitive tasks · Physical stamina for production work Work Environment · Manufacturing environment with exposure to machinery, chemicals, and temperature changes. PPE required

Job DescriptionOn-Board Services is hiring an Analytical Laboratory Technician in Madison Heights, MI For immediate consideration please send your resume to resumes@onboardusa.com Subject Line: Position Title and State you are located About Us: On-Board Services, Incorporated is an on-site contract service provider for a local manufacturing entity providing full-time positions to our employees. We offer benefits as well as 401k. Position Details: Title: Analytical Laboratory Technician Position Type: 1 year contract with additional opportunity contingent upon performance and continued business need Job Location: Madison Heights, MI Shift: 1st Benefits: 401K, Dental insurance, Life Insurance, Medical Insurance, Vision Insurance, PTO Compensation: $23-$27HR About Us: On-Board Services, Incorporated, is an on-site contract service provider for a local manufacturing entity, providing full-time positions to employees. We offer benefits as well as the opportunity to work with a great team! Responsibilities: • Operate and perform routine maintenance on analytical laboratory equipment., • Maintain and update analytical methods and procedures., • Work efficiently and effectively with Henkel project teams on major projects., • Prepare quality customer reports and support project portfolio management., • Communicate with customers through written correspondence, presentations, and other interactions., • Follow corporate standards and requirements related to safety, housekeeping, and quality., • Maintain and update digital programs, including Microsoft Office, LIMS, and statistical analysis software.Qualifications:, • Bachelor's degree in Chemistry preferred, along with prior laboratory experience., • Previous experience in an analytical laboratory highly desirable., • Proficiency in wet chemistry techniques, including titration, filtration, dilution, extraction, and gravimetric determinations., • Knowledge of and experience with GC-FID, ICP, IC, and SEM/EDS desirable., • Experience using pH meters and specific ion electrode meters., • Ability to work effectively in a fast-paced environment., • Excellent attention to detail., • Strong chemical math skills., • Strong computer skills., • Solid interpersonal and communication skills. www.onboardusa.com Apply Today! On-Board was founded in 1976 by Robert L. Wilson to provide Engineering and Design services to the chemical manufacturing industry. Today, On-Board is a thriving privately held family of companies with services including: Consulting, Professional Engineering, Industrial Maintenance and Facility Management, Contracted Manufacturing and Production Services, as well as Temporary Staffing and Recruiting throughout North America. The On-Board Family of Companies conducts operations through its Corporate Headquarters located in East Windsor, NJ along with Regional Offices in New Castle, DE and Wake Forest, NC. On-Board’s Mission is to provide “Flexible Service by applying the talents of our people, work processes and technology to meet our clients’ expectations in a Safe, Responsible and Dependable manner.” On-Board Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, religion, sex, national origin, age, disability or genetics. JD# 26-01613 INDOJ

Job DescriptionOur client, a Automotive Manufacturing company, is looking for a Mechanical Technician for their Warren, MI location. Responsibilities: • Perform all required tasks in relation to equipment setup, operation, cleaning, testing, and process checks to ensure reliable and consistent functionality., • Work consistently in controlled, “clean room” environment while wearing required protective equipment., • Utilize Job Instruction Training process to grow combined skill set of work group., • Mix chemicals (liquids, powders, gases) to a specified recipe., • Perform scheduled equipment maintenance and required cleaning., • Observe equipment functionality and troubleshoot issues when needed., • Maintain records on work performed, analyze data collected, and report results., • Recommend revisions to lab process., • Document best practices in battery cell manufacturing processes through standardized work instructions, • Use data collection to make well informed process improvements through corrective action., • Identify and eliminate operational waste through use of Lean manufacturing tools., • Execute problem solving techniques to improve efficiency, quality, and safety., • Maintain good housekeeping, safety practices, and supplies., • Coordinate and exchange findings with engineering personnel outside work group, • Properly dispose of material waste, • Actively participate in team/group Business Plan Deployment meetings, • Coordinate Test/build/and Preventive maintenance activities with stakeholders and support teams to ensure on time completion., • Vet incoming work requests to ensure equipment and hardware resources are in place to support. Requirements: • Associate degree in mechanical, chemical, electrical field or equivalent experience (is flexible to candidates without degrees if they have a good experience), • 2 years of experience, • Battery experience, a lot of lab experience is really helpful, not required, • Ability to work and function within a team, • Ability to operate with tools – knowledge of basic tools, • Comfortable being able to switch gears, comfortable working around chemicals (the use of PPE – this is very important and priority of safety) Why Should You Apply? • Health Benefits, • Referral Program, • Excellent growth and advancement opportunities

Job DescriptionDescription: This position is on 1st shift (7:00 a.m. - 3:30 p.m.) Summary Quality-focused professional with strong expertise in product quality monitoring, precision inspection, and metrology. Skilled in the use and programming of CMMs, vision systems, and advanced measurement tools to ensure compliance with customer specifications. Experience performing data analysis and other functions to assist production, prototypes, and continuous improvement initiatives. Functions Job Specific Responsibilities • Product Quality Monitoring, • First Piece and In Process inspection using standard inspection tools including CMM, calipers, micrometers, indicators, height gages, profilometers, contracer’s, vision systems., • Perform CMM programming, contracer programming, and vision system programming, • Participate in LDM, Gage R&R’s, and SPC Studies, • Proficiently use the computer to communicate to all levels of management, • Validation support of general CMM maintenance including contacting external CMM service providers for trouble shooting, • Provide support to the plant, • Validation support of measuring equipment used in production, • Document and process data and results using various methods of data input software, • Perform annual part layouts and dimensional studies to assure parts meet or exceed customer requirements, • Support in part layout and CMM programming during prototypes and production launches, • Assists in training inspectors and other personnel involved in quality inspections as needed, • Work independently with time management skill set, • Evaluate CMM data for accuracy prior to submission, • Complete all other special projects requested by the Quality Manager General Responsibilities · Adhere to company policies and procedures. · Follow all safety and MIOSHA requirements. · Maintain a clean work environment. · Participate in training and meetings · Follow all company Quality, Environmental, Safety, and Standards of Conduct policies. · Report safety or quality concerns in a timely manner. Core Competencies · Organizational Skills · Technical Capacity · Communication · Initiative · Quality focus · Accountability · Attention to detail · Results driven · Safety awareness · Time management Position Type/Expected Hours of Work This is a full-time hourly position (40 hours per week). Overtime may be required. Requirements: Eligibility Qualifications • Previous programming knowledge, • Mitutoyo CMM experience preferred, • Strong computer skills including basic office 365-Outlook, Excel, Word, PowerPoint, • Good understanding of SPC & MSA, • Able to adapt quickly to changes to priorities to support production, • Be a team leader able to communicate effectively with production and management, • Read and interpret complex blueprints, including GD&T, • Understands proper measurement/metrology techniques for GD&T features, • Maintain high standards of work ethics, organizational and leadership skills Physical Requirements (these may change depending on the job) · Ability to lift up to 50 pounds · Ability to stand, walk, and perform repetitive tasks · Physical stamina for production work Work Environment (this should always be standard, except in rare circumstances) · Manufacturing environment with exposure to machinery, chemicals, and temperature changes. PPE required Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description Amsted Automotive, Transform division in Sterling Heights is looking for Tooling Associate involved in build and die changes. If this is you, apply today. Available Shifts: Days: 7:00 AM – 3:00 PM Who We Are At Amsted Automotive, we’re more than just a company—we’re a community of innovators, creators, and dedicated professionals who take pride in our work and each other. As an employee-owned organization, every team member has a vested interest in our success and shares in our achievements. This unique ownership culture fosters a collaborative, supportive environment where your ideas and contributions truly matter. Come join us and be part of a dynamic team that’s transforming the industrial and automotive industries while shaping the future of mobility! What You Will Do • Troubleshoot, Repair, Maintain and optimize transfer and line dies in press and out as required, • Operate Tool room equipment and machinery with precision, • Supports press setup and efficiency as a team to achieve posted expectations, • Adherence to safety procedures and protocols, • Uses root cause analysis, problem solving skills to promote efficiency and quality, • Directly responsible to maintain product quality to print specifications where applicable, • Must be available to work overtime as required to meet Customer Demand, • Serves in the capacity of wastewater handler commensurate with completion of proper environmental training, • Other duties as assigned, • Adapt and promote Lean Manufacturing principals using 5”S” and Kaizen processes, • Support the Company’s Goals and Objectives through Continuous Improvement action plan participation and completion What You'll Need To Succeed • Must demonstrate proficiency of Blueprint GD&T interpretation of Dies, Details, and Part Prints, • Must be able to effectively troubleshoot and solve daily operational deficiencies, • Usage of a computer and other productivity machinery such as control panels, • Must be able to interpret C.M.M. or gaging information and adjust Tooling to maintain Customer Quality requirements, • Five years’ experience in Metal Stamping, Prototype, Tool and Die Build or Die Repair Technician, • Possess working knowledge of IATF16949, ISO 14001, and Q1 compliance criteria to maintain manufacturing environmental standards to protect and preserve our customers product and the environment, • Must be able to work in a fast-paced environment to meet production standards, • High school diploma or GED, • Some college or technical trade manufacturing education is preferred, • Work may require extended periods of sitting, standing, lifting, bending, stooping and performing repetitive motion tasks, • Excellent manual dexterity, ability to lift and carry up to 80 pounds frequently, • Work is performed in a manufacturing environment with continuous exposure to noise What's In It For You We create a supportive environment where employees thrive! With a range of benefits designed to enhance your health, well-being, and financial security, we’re here to support you every step of the way. Join us and experience the exceptional rewards that make Amsted Automotive a great place to work! Health And Wellness • Medical Insurance, • Dental and Vision Insurance, • Prescription Drug Benefits, • Wellness Reimbursement, • Telehealth, • Onsite health screenings, • Mental health resources, • Employee Assistance Program that includes counseling and support services for mental health, family support, financial advice, legal guidance, and more Financial Benefits • Competitive Salaries, • Employee Stock Ownership Plan, • Annual Bonus Opportunity, • 401k with Company Match, • Health Savings Account with Company Contribution, • Life and Disability Insurance Work-Life Balance • Paid Time Off, • Parental Leave, • 14 Annual Company Paid Holidays Development • Training Programs, • Education Expense Reimbursement, • Career Advancement Opportunities Additional Benefits • Pet Insurance and Discount Program, • Legal Insurance, • Employee Discounts, • Recognition and Rewards, • Community Involvement, • Workplace Giving Matching Gift Program

Job DescriptionCompany Description About Sika With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemical company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF11.20 billion in sales in 2025. Roles & Opportunities Sika is looking for an experienced Technician to join our team. At Sika, the Technician will: • Be responsible for laboratory testing, product development and laboratory housekeeping, • Perform laboratory testing, collect data, and record results, • Follow all safety protocols and established proceduresJob Description Specific Responsibilities: • Compound formulation and products per instruction given, • Test laboratory samples, production samples and raw materials., • Work on minor projects, testing plan, with minimum supervision., • Keep accurate records of all formulations and test results, generating reports and flagging any abnormalities, • Prepare reports or memos on assigned tasks or projects., • Maintain the laboratory equipment in good operating conditions., • Maintain assigned work areas and community work areas clean and tidy, following 5S and safety guidelines., • Order raw materials and laboratory supplies as assigned., • Store away raw materials, retains, and reference samples in designated areas., • Adherer to all safety guidelines and procedures, follow standard procedures for equipment including use of proper PPE, • Attend all company provided training programs.Qualifications, • High School Diploma or College degree in General Sciences, • Some industry experiences related to rubber, plastics or adhesive materials, • Able to follow instruction and work independently, • Good communicating and writing skill Additional Information Perks & Benefits • 401K with generous company match, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid Time Off, Paid Holidays, • Floating Holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilites of each role. Compensation is determined based on skills relevant to the position, education, and or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description CMM Technician At SLPT, quality is not simply a checkpoint. It is a competitive advantage. As a global leader in advanced automotive components and systems, we are helping redefine the future of mobility through innovation in pumps, valvetrain, transmission, and electric drive technologies. When you join SLPT, you become part of a high-performance team that values technical expertise, continuous improvement, and entrepreneurial thinking. You'll work alongside talented engineers and manufacturing professionals, leverage advanced inspection technologies, and play a direct role in ensuring the quality of products used by leading automotive manufacturers around the world. If you are passionate about precision, problem-solving, and making an impact, we invite you to build your future with us. About SLPT SLPT is a global manufacturer of advanced automotive components and systems serving customers worldwide. Our success is built on speed, responsiveness, flexibility, innovation, and an unwavering commitment to quality. From traditional powertrain technologies to next-generation hybrid and electrified vehicle solutions, SLPT develops products that help drive the future of transportation. Our world-class engineering and manufacturing facilities empower employees to contribute meaningful ideas, solve complex challenges, and create lasting value for our customers. Position Summary SLPT is seeking a detail-oriented and technically skilled CMM Technician to support our manufacturing quality operations. In this role, you will program and operate Coordinate Measuring Machines (CMMs) using PC-DMIS software, perform dimensional inspections, validate product conformance, and develop measurement programs that support customer and production requirements. You will serve as a key contributor to product quality, process improvement, and operational excellence across our manufacturing environment. What You'll Accomplish As a CMM Technician, you will: • Ensure production parts consistently meet customer and engineering specifications., • Develop and optimize PC-DMIS programs to support new products and quality initiatives., • Generate accurate inspection data and reports that drive manufacturing decisions., • Support continuous improvement efforts focused on quality, efficiency, and waste reduction., • Collaborate with production, engineering, suppliers, and customers to solve quality challenges., • Help maintain the high standards that make SLPT a trusted automotive supplier. Key Responsibilities Coordinate Measuring Machine Operations • Program and operate Coordinate Measuring Machines (CMM) using PC-DMIS software., • Perform dimensional layouts and inspections based on engineering drawings and specifications., • Load and fixture components correctly for inspection activities., • Execute approved measurement programs and verify inspection accuracy., • Prepare and maintain inspection reports, measurement records, and SPC documentation., • Record, analyze, and communicate inspection results. Quality Assurance & Compliance • Verify continued conformance of manufactured products to customer requirements., • Maintain quality records in accordance with company and customer standards., • Ensure required laboratory and environmental conditions are monitored and documented., • Notify leadership when environmental conditions fall outside established requirements., • Disposition inspected parts in accordance with established procedures. Continuous Improvement • Participate in kaizen events, waste reduction initiatives, 8D problem-solving activities, and other continuous improvement projects., • Support departmental setup activities and provide assistance across manufacturing operations as needed., • Collaborate with team members on quality, service, delivery, and cost improvement opportunities., • Participate in root cause analysis and corrective action activities. Team Collaboration • Partner with production teams, engineering, customers, and suppliers to resolve quality concerns., • Support customer visits, plant tours, and quality-related discussions., • Contribute to a positive, team-oriented culture focused on operational excellence. Required Qualifications • High School Diploma or GED., • Experience operating and programming Coordinate Measuring Machines (CMMs)., • Working knowledge of PC-DMIS 2017R1 programming., • Ability to read and interpret engineering drawings and specifications., • Basic understanding of Geometric Dimensioning & Tolerancing (GD&T)., • Ability to read and interpret quality standards, work instructions, maintenance manuals, and procedural documents., • Proficiency with Microsoft Office applications, including spreadsheets and word processing software., • Strong mathematical and analytical skills., • Ability to learn and interpret CMM layout reports and production drawings. Preferred Qualifications • Experience within automotive manufacturing environments., • Exposure to Statistical Process Control (SPC) methodologies., • Experience supporting ISO, IATF, or similar quality management systems., • Prior participation in continuous improvement or lean manufacturing initiatives. Core Competencies Successful candidates will demonstrate: • Customer Focus, • Results Orientation, • Problem Solving & Continuous Improvement, • Teamwork & Collaboration, • Adaptability & Self-Direction, • Timely Decision Making, • Attention to Detail, • Quality Mindset, • Written & Verbal Communication Skills, • Accountability & Ownership Compensation Competitive compensation offered based on experience, skills, and qualifications. Additional compensation details will be discussed during the interview process. Benefits & Perks SLPT offers a comprehensive benefits package designed to support the well-being of our employees and their families. Benefits may include: • Medical, dental, and vision coverage, • Retirement savings plans, • Paid time off and holidays, • Career development opportunities, • Employee training and advancement programs, • Employee assistance resources, • Safe and collaborative work environment Work Environment & Schedule This position is performed in both office and manufacturing environments and may include: • Exposure to manufacturing equipment, machinery, and production processes., • Regular interaction with production employees and manufacturing leadership., • Exposure to industrial noise, temperature variations, oils, lubricants, and manufacturing materials., • Occasional travel to customer, supplier, or SLPT facilities., • Flexible scheduling, overtime, weekend work, and alternative shifts as business needs require. Physical Requirements The successful candidate must be able to: • Stand and walk for extended periods throughout manufacturing facilities., • Frequently bend, stoop, kneel, crouch, climb, and reach., • Occasionally lift and carry up to 30 pounds., • Utilize measuring devices, computer systems, and manufacturing equipment interfaces., • Visually inspect products and equipment with close and distance vision, color vision, depth perception, and focus adjustment., • Safely work around manufacturing equipment and automation systems., • Wear required PPE, including safety glasses, hearing protection, gloves, and steel-toed footwear. Career Growth Opportunities At SLPT, we believe in developing talent from within. This role provides opportunities to expand your expertise in: • Advanced metrology and inspection systems, • Automotive quality systems, • Quality engineering, • Manufacturing process improvement, • Continuous improvement leadership, • Advanced manufacturing technologies Employees who demonstrate strong technical capability and leadership potential may have opportunities to grow into senior quality, engineering, or manufacturing leadership roles. Diversity, Equity & Inclusion SLW Warren LLC (SLPT) is committed to creating a workplace where all individuals are treated with dignity and respect. We value diversity and believe an inclusive workplace strengthens our organization and supports our mission. SLPT provides equal employment opportunities to all employees and applicants and prohibits discrimination and harassment of any kind. Employment decisions, including recruitment, hiring, promotion, compensation, training, and development, are based on business needs, job-related qualifications, performance, and individual merit. How to Apply Ready to help shape the future of automotive innovation? Apply today and bring your expertise in quality, precision measurement, and continuous improvement to a company that values your contributions and invests in your success. Join SLPT and help drive the future of mobility. #CMMTechnician #ManufacturingJobs #QualityAssurance #QualityControl #AutomotiveCareers #PCDMIS #GDandT #Metrology #PrecisionManufacturing #AdvancedManufacturing #NowHiring #CareerOpportunity #ContinuousImprovement #ManufacturingCareers #AutomotiveIndustry #IndustrialCareers #EngineeringSupport #QualityCareers #WeAreHiring #SLPTCareers

Job Description Job Title: Paint Technician Department: New/Repair FLSA Status: Non-Exempt Position Overview: The Paint Technician is responsible for preparing, testing, and painting hydraulic and pneumatic cylinders and related components. This position ensures all products meet quality standards and customer specifications while maintaining a safe, clean, and efficient work environment. Essential Duties: (Additional duties may be assigned as required.) • Deburr, clean, wash, and prepare cylinders and components for painting., • Apply various coatings, including primers, epoxy paints, and CARC (Chemical Agent Resistant Coating) paints, using spray-painting equipment., • Prepare surfaces for painting by removing old paint, rust, grease, dirt, and other contaminants., • Mask and protect surfaces and components that are not to be painted., • Mix paints and coatings according to manufacturer specifications and application requirements., • Inspect painted cylinders and components to ensure quality standards are met, identifying and correcting defects such as runs, sags, uneven coverage, or unpainted areas., • Perform cylinder testing as required to verify product performance and quality., • Operate tools, machinery, and equipment safely and in accordance with company policies and procedures., • Properly wear, maintain, and utilize all required personal protective equipment (PPE)., • Comply with all applicable environmental, health, and safety regulations related to paints, solvents, thinners, and other hazardous materials. Report any safety concerns or regulatory deviations to management immediately., • Maintain a clean, organized, and safe work area and assist with general shop housekeeping activities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above, and below, are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group settings. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, including whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Education/Experience: High school diploma or general education degree (GED); or equivalent combination of education and experience. Knowledge, Skills, and Other Abilities: • Mechanically incline, • Ability to read blueprints., • Ability to read tape measures. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, and talk or hear. The employee is frequently required to walk. The employee is occasionally required to stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move up to 25+ pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to wear safety glasses and hard sole/close toed shoes with a low heel when walking through the manufacturing shop and/or repair shop whether as part of performing their job or just passing through. In addition, long hair must be tied back when around hazards of flame, machinery, or equipment. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and vibration. The noise level in the work environment is usually loud. Yates Industries, Inc. is an equal employment opportunity employer and provides employment and advancement opportunities to its employees without discrimination because of race, color, religion, sex (including pregnancy and conditions related to pregnancy), sexual orientation, transgender status, weight, height, age, marital status, national origin, citizenship, disability, genetic makeup, military or veteran status, misdemeanor arrest record (not resulting in conviction) or any other protected characteristic as established by law. This policy of equal employment opportunity applies to all policies and procedures relating to recruitment and hiring, compensation, employee benefits, promotional opportunities, disciplinary decisions, termination and all other terms and conditions of employment.

Job Description Millwright / Maintenance Technician At SLPT, our maintenance professionals are the backbone of world-class manufacturing operations. Every piece of equipment, every production line, and every successful customer delivery depends on dedicated skilled trades professionals who ensure our facility operates safely, efficiently, and reliably. As a Millwright / Maintenance Technician, you'll work with advanced manufacturing equipment, automation systems, and production machinery that help drive the future of automotive technology. Your expertise will directly impact equipment uptime, production efficiency, workplace safety, and operational success. If you're a hands-on problem solver who enjoys troubleshooting, repairing equipment, and working with cutting-edge manufacturing technology, SLPT offers the opportunity to grow your career with a global leader in automotive innovation. About SLPT SLPT is a global leader in the design and manufacture of advanced automotive components and systems specializing in pumps, valvetrain, transmission, and electric drive technologies. Driven by innovation, responsiveness, and engineering excellence, we create solutions that support both traditional and electrified vehicle platforms. Our world-class manufacturing facilities empower employees to make meaningful contributions while helping shape the future of mobility. At SLPT, your skills help keep innovation moving. Position Summary SLPT is seeking a skilled Millwright / Maintenance Technician to support the installation, maintenance, troubleshooting, and repair of manufacturing equipment and facility systems. In this hands-on role, you will play a critical part in maintaining equipment reliability, minimizing downtime, supporting production operations, and ensuring a safe and efficient manufacturing environment. The ideal candidate will possess strong mechanical aptitude, troubleshooting expertise, and a commitment to safety and continuous improvement. What You'll Accomplish As a Millwright / Maintenance Technician, you will: • Maintain equipment reliability and plant productivity., • Diagnose and resolve mechanical issues that impact production., • Support installation and commissioning of new machinery., • Improve equipment performance through preventative maintenance activities., • Help reduce downtime and increase operational efficiency., • Contribute to a safe and productive workplace environment. Key Responsibilities Equipment Installation & Assembly • Install, assemble, align, and commission manufacturing equipment and machinery., • Interpret blueprints, machine specifications, and technical documentation., • Test newly installed equipment to ensure proper functionality and performance., • Assist with machinery upgrades and facility improvement projects. Preventive Maintenance • Perform routine inspections of machinery and production equipment., • Execute preventive maintenance schedules to maximize equipment uptime., • Identify wear patterns and proactively replace components before failures occur., • Lubricate, adjust, calibrate, and maintain mechanical systems. Troubleshooting & Repair • Diagnose mechanical issues affecting production equipment and facility systems., • Repair or replace defective equipment components., • Utilize root cause analysis techniques to address recurring failures., • Respond to equipment breakdowns and provide timely corrective actions., • Minimize production interruptions through effective troubleshooting. Equipment Relocation & Upgrades • Safely dismantle and relocate machinery during facility moves, expansions, or upgrades., • Support installation of new production equipment and production line changes., • Coordinate machine movement activities while maintaining safety standards., • Ensure proper alignment and setup after relocations. Safety & Compliance • Follow all company safety policies and procedures., • Maintain strict adherence to OSHA and workplace safety regulations., • Utilize lockout/tagout procedures and safe work practices., • Wear required PPE and ensure equipment is operated safely., • Identify potential hazards and recommend corrective actions. Continuous Improvement • Identify opportunities to improve equipment efficiency and reliability., • Participate in continuous improvement and cost-reduction initiatives., • Provide recommendations for process improvements and equipment upgrades., • Support maintenance best practices that improve plant performance. Team Collaboration • Work closely with Production, Engineering, Quality, and Maintenance leadership., • Support cross-functional teams during troubleshooting and improvement projects., • Communicate equipment concerns, maintenance needs, and repair status effectively., • Assist vendors, contractors, and equipment manufacturers when needed. Required Qualifications • Minimum of 3 years of maintenance technician, millwright, or industrial maintenance experience in a manufacturing environment., • Strong mechanical aptitude and working knowledge of industrial machinery., • Experience using maintenance tools, diagnostic equipment, and mechanical systems., • Ability to troubleshoot mechanical equipment and resolve technical issues., • Experience reading and interpreting machine manuals, blueprints, schematics, and specifications., • Strong attention to detail and commitment to safe work practices., • Ability to work effectively both independently and as part of a team., • Strong communication and problem-solving skills. Preferred Qualifications • Millwright certification, journeyman status, or equivalent trade training., • Experience with automated manufacturing equipment., • Forklift certification and experience operating material handling equipment., • Experience in automotive manufacturing environments., • Knowledge of hydraulics, pneumatics, conveyors, robotics, or industrial automation systems., • Welding, fabrication, or machining experience., • Preventive and predictive maintenance experience. Core Competencies Successful candidates will demonstrate: • Mechanical Troubleshooting, • Equipment Installation & Alignment, • Preventive Maintenance, • Equipment Reliability, • Safety Awareness, • Problem Solving, • Technical Aptitude, • Attention to Detail, • Blueprint & Technical Document Interpretation, • Continuous Improvement, • Adaptability, • Teamwork & Collaboration, • Communication Skills, • Accountability & Dependability Compensation Competitive compensation based on experience, technical skills, certifications, and qualifications. Additional compensation details will be discussed during the interview process. Benefits & Perks SLPT offers a comprehensive benefits package designed to support employees and their families, including: • Medical, dental, and vision insurance, • Retirement savings plans, • Paid holidays and paid time off, • Employee assistance resources, • Career development opportunities, • Technical training and advancement programs, • Stable and growing manufacturing environment Work Environment & Schedule This role operates primarily within a manufacturing environment and includes: • Exposure to machinery, automation systems, and industrial equipment., • Interaction with production operations and maintenance teams., • Exposure to manufacturing noise, lubricants, oils, and temperature variations., • Occasional overtime, weekends, and alternative schedules based on operational requirements., • Opportunities to support equipment installations and facility improvement projects. Physical Requirements The successful candidate must be able to: • Walk throughout manufacturing facilities for extended periods., • Stand for prolonged periods while performing maintenance activities., • Bend, crouch, kneel, reach, and climb ladders or equipment platforms., • Lift, push, pull, and carry equipment components and maintenance tools., • Work in confined spaces or elevated areas when necessary., • Use hand tools, power tools, measuring instruments, and maintenance equipment safely., • Visually inspect machinery and equipment components with accuracy., • Wear required Personal Protective Equipment (PPE), including safety glasses, hearing protection, gloves, and steel-toed footwear. Career Growth Opportunities At SLPT, skilled trades professionals have opportunities to build long-term careers and advance into leadership and technical specialist roles. Potential career paths include: • Senior Maintenance Technician, • Lead Millwright, • Maintenance Planner, • Maintenance Supervisor, • Reliability Technician, • Maintenance Manager, • Manufacturing Engineering Support Roles, • Operations Leadership Positions We invest in employee development and provide opportunities to expand technical expertise across advanced manufacturing technologies. Diversity, Equity & Inclusion SLW Warren LLC (SLPT) is committed to creating a workplace where all individuals are treated with dignity and respect. We value diversity and believe an inclusive workplace strengthens our organization and supports our mission. SLPT provides equal employment opportunities to all employees and applicants and prohibits discrimination and harassment of any kind. Employment decisions, including recruitment, hiring, promotion, compensation, benefits, training, and development, are based on business needs, job-related qualifications, performance, and individual merit. How to Apply Are you a skilled maintenance professional who enjoys solving mechanical challenges, improving equipment performance, and supporting world-class manufacturing operations? Apply today and join a team where your expertise helps drive operational excellence and the future of automotive innovation. Join SLPT and help keep manufacturing moving. #Millwright #MaintenanceTechnician #IndustrialMaintenance #ManufacturingJobs #SkilledTrades #MechanicalTechnician #EquipmentRepair #PlantMaintenance #ManufacturingCareers #AutomotiveManufacturing #PreventiveMaintenance #IndustrialMechanic #MaintenanceCareers #EquipmentReliability #FactoryMaintenance #TradesCareers #NowHiring #IndustrialJobs #MechanicalMaintenance #SLPTCareers

Job Description Company Overview: Coplas Inc. an affiliate of Tiercon Corp. is an automotive supplier committed to the design, manufacture and assembly of quality exterior trim and assembled systems used as original equipment in the automotive market. Headquartered in Sterling Heights Michigan, Coplas employs approximately 50 employees. Coplas is seeking knowledgeable, self-directed, experienced and hardworking individuals interested in the automotive industry as a Process Technician/Afternoon Shift Supervisor Job Summary & Reporting Structure: • Reporting to the Assistant Production Manager, the Process Technician/Supervisor is responsible for overseeing the shift daily operations and personnel of the production line to ensure that all customer schedules are met within the established safety, quality and production targets. In addition, they will resolve any concerns or problems of production personnel and ensure all employees adhere to the policies and procedures outlined in the ISO9001:2015 AND IATF 16949 Quality System, • The supervisor will be responsible to safely guide and lead both Union and Non-Union team members. The Supervisor interacts with the Team Leader to provide direction, solve problems and communicate changes., • The Supervisor also performs the role of Molding Set Up Technician. As the Set-Up Technician they will be responsible to change molds based on the schedule. This involves operating the injection molding machine, part removal robots, degating robots and the overhead cranes. Responsibilities: • Oversee the daily operations of the start-up and shut off equipment and machinery; review and organize production schedule; organize personnel, ensuring all positions are filled; tend to equipment breakdowns; and monitor production supplies; production line, ensuring customers' production schedules are met within the required quality specifications at the established production targets., • Manage production personnel, resolving concerns, reviewing performance, and maintaining morale, discipline and employee training and attendance in accordance with the Company and ISO9001:2015 AND IATF 16949 procedures., • Analyze and assess processes, process conditions, workflow, and yields; design and implement experiments, troubleshoot processes; recommend and implement solutions and improvements., • Perform all program troubleshooting and adjustments to injection mold equipment including robotics and end of arm tooling, • Assist maintenance technician/electrician with machine maintenance including mechanical, hydraulic, and pneumatic troubleshooting and repair., • Assist mold maker with injection mold tool troubleshooting, repair, and maintenance., • Promote and implement continuous improvement and a quality attitude in all production areas., • Lead the daily safety, quality and delivery meetings for the shift, • Complete production reporting with daily production numbers, counts produced per machine, scrap reporting and downtime. Shift reporting of any issuing involving production, safety issues or staffing levels, • Liaise with union representatives to promote strong employee and labour relations, • Ensure all personnel adhere to all procedures and policies, all processes are monitored, and all product is labeled, stored and handled as outlined in the QISO9001:2015 AND IATF 16949 Quality system and the Company Safety policies., • Participate in quality audits, FMEA's, PPAP's or other reviews as requested., • Other duties as assigned, • ISO9001:2015 AND IATF 16949 duties as required Qualifications: • Minimum High School Diploma, • Post-Secondary Education in a related field preferred, • Training, Supervision, Mechanically inclined, • Effective communication skills, verbal and written, • Computer skills, • First aid, forklift and crane training an asset, • Automotive experience is an asset, • Injection molding experience is an asset, • Minimum 2 years of experience as a Supervisor, • Minimum 10 years of experience in a manufacturing environment Coplas Inc. is proud to be an inclusive and equal opportunity employer. At Coplas we are committed to ensuring the workplace is free from discrimination. Coplas welcomes and encourages applications from everyone including persons with disabilities. During our hiring process, we will notify job applicants that accommodations are available upon request. If a selected job applicant requests accommodation, Coplas will consult with the individual and provide or arrange for the appropriate accommodation taking into account the applicant's disability-related needs. Please contact Coplas Human Resources at hr@tiercon.com. #INDTC Chosen candidates must undergo a drug screen and background check as a condition of employment.

Job DescriptionJob Title: Quality Lab Technician Department: Manufacturing Reports To: Plant Manager Location: Fraser, MI Status: Full-time, non-exempt Summary – Who We Seek We are seeking a detail-oriented and hands-on Quality Lab Technician to support product quality both on the manufacturing floor and within the quality laboratory for automotive interior trim components. This role is ideal for someone who enjoys a mix of production support, laboratory testing, inspection, and problem-solving in a fast-paced manufacturing environment. The Quality Lab Technician plays a key role in ensuring products meet customer and internal quality standards through routine inspections, testing, data collection, and collaboration with production and engineering teams. The ideal candidate is highly organized, quality-focused, and comfortable working directly with operators, production personnel, and quality systems to identify and resolve issues quickly. While automotive manufacturing experience is preferred, we value individuals with strong attention to detail, accountability, technical curiosity, and a proactive approach to continuous improvement. Required Job Duties • Perform daily quality inspections and testing on production parts in both the manufacturing area and quality laboratory., • Conduct visual, dimensional, and functional inspections to verify conformance to customer and engineering specifications., • Operate and utilize quality lab equipment such as calipers, gauges, peel testers, and 3D scanning equipment., • Collect, record, and maintain inspection and testing data accurately within quality documentation systems., • Inspect outgoing product to ensure only conforming material is released to customers., • Identify, label, and segregate non-conforming material and support proper containment and disposition activities., • Assist with root cause investigations and corrective actions related to customer complaints, internal defects, and production concerns., • Monitor recurring defect trends and support improvement activities on the production floor., • Support quality audits, layered process audits, and customer audit preparation activities., • Assist in maintaining quality standards and compliance with IATF 16949 and ISO 9001 requirements., • Collaborate closely with production, engineering, and leadership teams to address quality concerns and improve manufacturing processes., • Support launch activities and production ramp-ups for new or existing programs., • Maintain cleanliness, organization, and calibration awareness within the quality lab environment., • Participate in continuous improvement initiatives focused on reducing scrap, improving efficiency, and enhancing product quality., • Follow all safety procedures, work instructions, and company policies.Experience and Education, • High school diploma or equivalent required; associate degree or technical certification preferred., • 2+ years of experience in a quality, laboratory, inspection, or manufacturing environment preferred., • Automotive manufacturing experience preferred.Knowledge / Skills / Abilities, • Experience using basic inspection and measurement equipment including calipers, gauges, peel testers, and scanners., • Understanding of quality inspection methods, defect identification, and basic root cause analysis., • Familiarity with SPC, quality documentation, and inspection reporting is preferred., • Ability to read and interpret drawings, specifications, work instructions, equipment manuals, and Safety Data Sheets., • Strong attention to detail and commitment to product quality., • Strong organizational and documentation skills., • Effective communication and teamwork skills across production and leadership teams., • Ability to work independently while managing multiple priorities in a fast-paced environment., • Analytical thinking and problem-solving skills., • Familiarity with Lean Manufacturing and continuous improvement concepts is a plus., • Knowledge of injection molding, lamination, or automotive interior trim manufacturing processes is preferred., • Basic math and computer skills required., • Willingness to learn and grow within quality and manufacturing operations.Physical Requirements, • This position requires frequent standing, walking, bending, stooping, kneeling, and close visual inspection work., • Good hand dexterity, hearing, and vision are essential, including the ability to differentiate colors., • Ability to perform repetitive motions using hands, wrists, and arms., • Moderate lifting of up to 50 lbs. may be required., • Must be able to work in both a manufacturing floor environment and laboratory setting., • Required to wear appropriate personal protective equipment (PPE). Powered by JazzHR GWd8iVccU8

Job Description Below is a polished job posting version that is optimized for ADP Recruiting, Indeed, LinkedIn, and career sites. It focuses on attracting candidates while clearly communicating the role and expectations. Quality Technician Location: Warren, MI Employment Type: Full-Time Join the Team That Drives Quality Excellence SLPT is a global leader in the design and manufacture of advanced automotive components and systems, specializing in pumps, valvetrain, transmission, and electric drive technologies. With a strong focus on speed, responsiveness, flexibility, and entrepreneurial spirit, we are committed to delivering high-quality solutions that meet and exceed our customers' expectations. Our world-class engineering and manufacturing facilities empower us to develop innovative products that set new benchmarks in the automotive industry. From traditional systems to cutting-edge hybrid and electrified powertrains, SLPT is shaping the future of mobility through excellence and innovation. If you are passionate about quality, problem-solving, and continuous improvement, we invite you to join our growing team. Position Summary The Quality Technician is responsible for verifying production part assemblies, fixtures, gauges, and material characteristics against engineering drawings, specifications, and quality standards. This role plays a critical part in ensuring product conformity, supporting manufacturing operations, and driving customer satisfaction through effective quality processes. What You'll Do • Verify product assemblies, fixtures, gauges, and materials to engineering specifications., • Ensure proper material handling, tagging, containment, scrap control, and inventory management of nonconforming materials., • Facilitate accurate identification and tagging of production parts., • Organize and lead quality containment activities and sorting operations for internal and customer concerns., • Track, report, and communicate quality findings and corrective actions., • Develop, implement, and monitor Quality Alerts through PLEX., • Ensure compliance with required production inspections and process controls., • Audit red-rabbit and poke-yoke processes and report findings., • Conduct Layered Process Audits (LPAs) as required., • Perform destructive and non-destructive testing on materials and products., • Interpret engineering drawings, specifications, and schematics to verify product conformity., • Prepare reports, charts, and data analyses to identify trends and deviations from standards., • Support continuous improvement initiatives and quality system compliance.What We're Looking ForRequired Qualifications, • High School Diploma or GED required., • Associate degree or coursework in Quality, Manufacturing, Engineering, or related field preferred., • Ability to operate and set up measuring and inspection equipment., • Proficiency with Microsoft Office applications, including Excel, Word, and PowerPoint., • Ability to lift up to 30 pounds., • Ability to perform product containment, sorting, and inspection activities., • Ability to disassemble and assemble components using hand tools., • Strong interpersonal skills with the ability to work effectively with production employees, team leaders, supervisors, and managers.Preferred Experience, • Quality experience in a manufacturing environment., • Experience interpreting engineering drawings and specifications., • Familiarity with automotive quality standards and manufacturing processes., • Experience using PLEX or similar ERP/MES systems.Key Competencies, • Detail-oriented and data-driven decision-making, • Strong problem-solving and analytical skills, • Continuous improvement mindset, • Customer-focused approach, • Adaptability and flexibility, • Self-motivated and self-directed, • Effective communication skills, • Ability to work collaboratively across departments, • Results-oriented with strong organizational skillsWhy Join SLPT?, • Competitive compensation, • Comprehensive benefits package, • 401(k) with company contribution, • Paid time off and holidays, • Opportunities for advancement and professional development, • Collaborative and innovative work environment, • Exposure to leading automotive technologiesEqual Employment Opportunity SLW Warren LLC (SLPT) is committed to providing a work environment in which all individuals are treated with respect and dignity. We value diversity and believe that an inclusive workplace strengthens our organization and supports our mission. SLPT provides equal employment opportunities to all employees and applicants and prohibits discrimination and harassment of any kind. All employment decisions, including recruitment, hiring, placement, promotion, training, compensation, benefits, discipline, and termination, are based on business needs, job-related qualifications, and individual merit. Ready to help drive quality and innovation in automotive manufacturing? Apply today and become part of the SLPT team. Shift: Second Shift Hours: Monday through Friday, 3:00 PM to 11:00 PM Overtime: Weekend overtime may be required based on production demands, customer requirements, and business needs.

Job Description 1st Shift - 5:30AM-3:30PM - Monday - Thursday Plus Fridays and Weekends for possible overtime as needed There is a possibility of being transferred to 2nd shift depending on experience level and business needs. 2nd Shift - 3:15PM-1:15AM - Monday-Thursday About us: MNP is an award-winning fastener manufacturer specializing in diameters from M3 to M24. Established in 1970, it is a family-owned business with core values of Humility, Integrity, Trust, Compassion and Dedication. MNP controls the complete manufacturing process from the annealing of the raw coiled steel through heading, rolling, heat treating, plating, coating, packaging, and distributing. Employees at MNP work together in teams yet work without constant supervision. MNP seeks to promote from within and offers training and development at all levels of the organization; 75% of all leadership positions are held by employees who were promoted from within. About the role of Maintenance Technician: The Maintenance Technician's purpose is ensure machinery in the plant runs efficiently and optimally. Maintenance technicians will have experience working in a variety of systems and know how to diagnose, maintain, and repair different types of machinery within hydraulic, pneumatic, mechanical, and electrical systems. Responsibilities of a Maintenance Technician: Visually inspect and tests machinery and equipment Listens for unusual sounds from machines or equipment to detect malfunction and discuss machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine Dismantles defective machines and equipment and installs new or repaired parts Cleans and lubricates shafts, bearings, gears, and other parts of machinery Installs and repairs electrical apparatus, such as transformers and wiring, and electrical and electronic components of machinery and equipment Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment Repairs and maintains physical structure of establishment Installs, programs, or repairs automated machinery and equipment such as programmable controllers Set up and operate machine tools such as lathe, grinder, drill, and milling machine to repair or fabricate machine parts, jigs and fixtures, and tools Operates cutting torch or welding equipment to cut or join metal parts Fabricates and repairs counters, benches, partitions, and other wooden structures Operates Hilo and diagnose Hilo problems Additional skills and/or experience required for success in the role of a Maintenance Technician: Mechanically inclined Able to use hand tools such as wrenches, screw drivers, etc. Possess basic computer skills Able to commit to perfect attendance during the training schedule Able to read job instructions Able to complete required paperwork Able to stand, walk, bend, push, pull, lift, and sit as needed throughout the day Able to communicate clearly and effectively Benefits of a Maintenance Technician: Along with competitive pay, MNP offers employees BCBS medical, dental and vision insurance, company-paid life insurance, life insurance, flexible spending account, short-term and long-term disability, 401(k) and 401(k) match, discretionary profit-sharing. Aflac products are also available. Benefits listed here are optional and have a waiting period. Additional benefits include a health clinic (onsite in Utica) for employees and their families; optional employee wellness activities include managing and tracking diabetes, blood pressure, and weight control; onsite, personalized retirement counseling; employee referral bonuses and employment of friends and families; access to tickets for Jimmy John's Field; volunteer opportunities include Gleaners, Suite Dreams, Veterans Support activities, Blessings in a Backpack, food and clothing drives, and others; employee recognition includes anniversaries, birthdays, and special events; employee discounts on autos, cell phones, and others; employee social activities include Detroit Tigers opening day, Fat Tuesday, ice cream/popsicles, picnics, team meetings, team outings, one-on-one with the president, and many more. This job description is not intended to be inclusive of all assigned duties, responsibilities or aspects of the job described, and may be amended at any time at the sole discretion of the company. We are an equal opportunity employer and a second chance employer. We give consideration for employment to all qualified applicants without regard to race, color, religion, sex, national origin, age, disability, and any other related State or Federal protected classes or characteristics Additional skills and/or experience required for success in the role: Able to pass a pre-employment, post-offer physical, drug screen Able to pass a background check Job Posted by ApplicantPro

Job Description Amsted Automotive, Transform division in Sterling Heights is looking for Tool and Die Makers involved in build and die changes. If this is you, apply today. Available Shifts: Midnights: 11:00 PM – 7:00 AM (+15% shift premium) Who We Are At Amsted Automotive, we’re more than just a company—we’re a community of innovators, creators, and dedicated professionals who take pride in our work and each other. As an employee-owned organization, every team member has a vested interest in our success and shares in our achievements. This unique ownership culture fosters a collaborative, supportive environment where your ideas and contributions truly matter. Come join us and be part of a dynamic team that’s transforming the industrial and automotive industries while shaping the future of mobility! What You Will Do • Troubleshoot, Repair, Maintain and optimize transfer and line dies in press and out as required, • Operate Tool room equipment and machinery with precision, • Supports press setup and efficiency as a team to achieve posted expectations, • Adherence to safety procedures and protocols, • Uses root cause analysis, problem solving skills to promote efficiency and quality, • Directly responsible to maintain product quality to print specifications where applicable, • Must be available to work overtime as required to meet Customer Demand, • Serves in the capacity of wastewater handler commensurate with completion of proper environmental training, • Other duties as assigned, • Adapt and promote Lean Manufacturing principals using 5”S” and Kaizen processes, • Support the Company’s Goals and Objectives through Continuous Improvement action plan participation and completion What You'll Need To Succeed • Must demonstrate proficiency of Blueprint GD&T interpretation of Dies, Details, and Part Prints, • Must be able to effectively troubleshoot and solve daily operational deficiencies, • Usage of a computer and other productivity machinery such as control panels, • Must be able to interpret C.M.M. or gaging information and adjust Tooling to maintain Customer Quality requirements, • Five years’ experience in Metal Stamping, Prototype, Tool and Die Build or Die Repair Technician, • Possess working knowledge of IATF16949, ISO 14001, and Q1 compliance criteria to maintain manufacturing environmental standards to protect and preserve our customers product and the environment, • Must be able to work in a fast-paced environment to meet production standards, • High school diploma or GED, • Some college or technical trade manufacturing education is preferred, • Work may require extended periods of sitting, standing, lifting, bending, stooping and performing repetitive motion tasks, • Excellent manual dexterity, ability to lift and carry up to 80 pounds frequently, • Work is performed in a manufacturing environment with continuous exposure to noise What's In It For You We create a supportive environment where employees thrive! With a range of benefits designed to enhance your health, well-being, and financial security, we’re here to support you every step of the way. Join us and experience the exceptional rewards that make Amsted Automotive a great place to work! Health And Wellness • Medical Insurance, • Dental and Vision Insurance, • Prescription Drug Benefits, • Wellness Reimbursement, • Telehealth, • Onsite health screenings, • Mental health resources, • Employee Assistance Program that includes counseling and support services for mental health, family support, financial advice, legal guidance, and more Financial Benefits • Competitive Salaries, • Employee Stock Ownership Plan, • Annual Bonus Opportunity, • 401k with Company Match, • Health Savings Account with Company Contribution, • Life and Disability Insurance Work-Life Balance • Paid Time Off, • Parental Leave, • 14 Annual Company Paid Holidays Development • Training Programs, • Education Expense Reimbursement, • Career Advancement Opportunities Additional Benefits • Pet Insurance and Discount Program, • Legal Insurance, • Employee Discounts, • Recognition and Rewards, • Community Involvement, • Workplace Giving Matching Gift Program

Job Description QA Technician II Location: Denver, CO 80216 Payrate for role $29.00 per hour / W2 Contract Shift: 1st shift 4x10 - Sunday, Thursday, Friday, Saturday (10am - 8pm) Candidate must be open for occasional overtime if needed. As a Flex Shift Quality Assurance Lab Tech at our milk plant, you'll be responsible for ensuring the quality and safety of our products. Your duties will include conducting inspections of raw materials, monitoring production processes, and performing various tests to verify compliance with quality standards. You'll also be tasked with documenting findings, reporting any issues, and implementing corrective actions as needed. Your attention to detail and commitment to excellence will play a crucial role in improving our reputation for delivering top-quality milk products to our customers. Main responsibilities: Conduct quality checks on incoming raw materials and finished milk products. Perform regular inspections of production processes to ensure compliance with safety and quality standards. Monitor and document equipment calibration and maintenance. Collaborate with production teams to address any quality-related issues promptly. Evaluate trends from test results and communicate these trends to employees and management. Implement and maintain Good Manufacturing Practices (GMP), Standard Operating Procedures (SOPs), Food Safety and regulatory compliance. Participate in internal audits and assist with external audits as needed. Record and analyze data and prepare reports on quality metrics. Ensure that daily records are kept and maintained. Drive continuous improvement, assist in the discipline to maintain a 6-S rating of an "A ". Follow-up customer complaints and follow-up with production. Implement quality control processes/testing to meet the expectations of Safeway quality standards and ensure that the product(s) are within specification. Any other project assigned. What we are searching for: We believe the successful candidate has these qualifications and experience: Bachelor's degree preferable. High school diploma or equivalent required. Additional relevant certifications are a plus. *Minimum 1 year of QA experience. Previous experience in quality assurance or a similar role in food production is preferred; however candidates with microbology or chemical laboratory experience are acceptable. Strong mindfulness and analytical skills. Familiarity with quality control procedures and regulations preferred. Ability to work independently and in a team environment. Demonstrate ability to effectively manage multiple tasks and duties as they relate to food safety and regulatory compliance. Effective communication and documentation skills. Flexibility to work the specified shift and occasionally on weekends if required. Good analytical and critical thinking skills. Able to multi-task in fast paced environment with limited supervision. Proficient in window-based PC programs. Lab Test Equipment/Maintenance preferred. Some knowledge of HACCP/Food Safety preferred. Candidate must be able to lift up to 50 lbs.

Job Description Quality Layout Technician Gage Bilt is a proud Michigan-based company that manufactures and sells our own line of industrial riveting installation tools and accessories worldwide. As a family-run business since 1956, we have a dedicated team, including employees with more than 30 years of service. We are looking for an experienced Quality Layout Technician to perform hands-on dimensional inspection and layout work within our Quality Department. Strong dimensional layout experience is required. This is NOT a visual inspection position. Primary Responsibilities • Perform first-piece, in-process, and plate inspections according to drawings, specifications, and process requirements., • Perform dimensional layouts using precision measuring and inspection equipment., • Set up and use optical comparators, profilometers, bore gauges, and standard hand measuring equipment., • Use the Keyence IM Series Optical Measuring System and Mitutoyo Form Tracer as required., • Read and interpret blueprints, drawings, dimensions, tolerances, and process documentation., • Accurately record and document inspection results., • Identify dimensional or quality concerns and communicate findings to the appropriate personnel., • Work directly with machinists and manufacturing employees to help resolve inspection or measurement concerns., • Assist with gauge calibration activities and proper care of inspection equipment., • Support additional inspection needs based on production priorities. Qualifications & Skills • Strong dimensional inspection and layout experience., • Previous experience in a machining or manufacturing inspection environment., • Ability to read and interpret blueprints and manufacturing drawings., • Experience using precision measuring and inspection equipment., • Working knowledge of GD&T preferred., • Strong attention to detail and accuracy., • Good communication and organizational skills., • Basic computer skills, including Microsoft Excel and Word., • Ability to work independently while also working cooperatively with Manufacturing, Quality, and Management., • Positive attitude and willingness to learn new equipment and inspection methods. Education • High School Diploma or GED required. What We Offer • Company sponsored health, dental, and vision insurance for employees and family, • 401(k) with 4% company match, • PTO, • Education Assistance, • Opportunities to learn new skills and grow within the company

Job Description Die Setter – Servo & Transfer Press Systems We are seeking an experienced Die Setter / Die Setup Technician with a strong background in stamping press operations, die setup, servo press systems, and transfer press programming. The ideal candidate will have hands-on experience setting up, adjusting, troubleshooting, and operating metal stamping dies and automated press equipment. Candidates must have experience with press programming, servo-driven equipment, or transfer press systems, preferably within a metal stamping or automotive manufacturing environment. Responsibilities • Perform die setup, die changes, and die adjustments on industrial metal stamping presses and production equipment., • Set up, operate, and troubleshoot servo presses, transfer presses, and automated stamping systems., • Perform press programming, parameter adjustments, and equipment setup to support production requirements., • Set up and adjust transfer systems, transfer fingers, feed mechanisms, and automation equipment., • Perform servo system adjustments, including positioning, speed, timing, and motion settings., • Troubleshoot stamping dies, press controls, servo-driven equipment, and transfer mechanisms., • Complete die installation, removal, alignment, and changeovers to minimize production downtime., • Adjust press stroke, shut height, feed settings, and die positioning as required., • Identify and resolve die setup issues, press malfunctions, and production quality problems., • Work with maintenance, tooling, and production teams to improve equipment reliability and efficiency., • Ensure proper die alignment, press safety, and stamping quality standards., • Maintain accurate setup documentation and follow established manufacturing procedures. Qualifications • Previous experience as a Die Setter, Die Setup Technician, Press Setup Technician, or Stamping Press Technician., • Hands-on experience with metal stamping presses, progressive dies, or transfer dies., • Experience with at least one of the following: press programming, servo press systems, or transfer press systems., • Ability to perform die changes, press setups, tooling adjustments, and equipment troubleshooting., • Knowledge of servo-driven press equipment, motion control, or transfer automation., • Familiarity with press controls, machine parameters, and production setup procedures., • Understanding of stamping operations, die alignment, shut height adjustments, and press safety., • Ability to read and interpret blueprints, setup sheets, tooling specifications, and technical documentation., • Strong mechanical aptitude and troubleshooting skills., • Experience in automotive stamping, high-volume metal stamping, or industrial manufacturing preferred. Die Setter, Die Setup Technician, Press Setup Technician, Stamping Press Technician, Metal Stamping, Die Changes, Die Setup, Servo Press, Transfer Press, Press Programming, Servo Programming, Transfer Press Programming, Transfer Die, Progressive Die, Servo-Driven Equipment, Motion Control, Transfer Automation, Press Troubleshooting, Die Alignment, Shut Height Adjustment, Press Controls, Stamping Operations, Automotive Stamping

Job Description Machine Maintenance Technician / Machine Repair Chesterfield- MI Overview: Exco Extrusion Dies Inc. was established in 1997 following the foundation of Exco Technologies Limited in 1952. The Exco Extrusion Group has grown to include facilities in Canada, Texas, Colombia, Brazil, Mexico, Germany and Italy. The Exco Extrusion Group of manufacturing facilities are part of the largest producers of extrusion tooling globally. Our mission is to provide aluminum extrusion dies which will produce and assure long operating life. Our production capabilities exceed 4,500 dies a month, supporting extruders serving construction, automotive, and consumer goods markets. Job Description: The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. Responsibilities: • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform simple machinist duties and responsibilities., • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test and make adjustments., • Perform regular preventive maintenance on machines, equipment and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. Required Qualifications: • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 4+ years of manufacturing experience.

Job DescriptionTest Technician At SLPT, technicians do more than keep equipment running. They help turn engineering ideas into validated products that support the next generation of mobility. As a Test Technician, you will work where product development, electronics, automation, and manufacturing come together. You will build and commission test systems, troubleshoot complex electrical issues, support prototype electronics, and help validate electric oil pumps, motors, motor controllers, and emerging automotive technologies. This role offers the variety of a development lab with the real-world impact of manufacturing. You will work alongside test, product, and automation engineers; gain exposure to data acquisition, motor controls, SMT equipment, and automotive communications; and see your work contribute directly to reliable product launches. If you enjoy hands-on problem-solving, learning new technologies, and building systems that engineers depend on, SLPT is a place to grow your skills and make a visible impact. About SLPT Automotive SLPT Automotive is a global designer and manufacturer of advanced automotive components and systems, with expertise in pumps, valvetrain, transmission, and electric-drive technologies. Our engineering and manufacturing teams develop solutions for conventional, hybrid, and electrified powertrains. We combine technical expertise with speed, responsiveness, flexibility, and an entrepreneurial approach to deliver high-quality solutions for automotive customers worldwide. Join a growing team where practical innovation, collaboration, and hands-on problem-solving help shape the future of mobility. Position Summary SLPT Automotive is seeking a hands-on Test Technician specializing in electrical and electronic systems to support automotive product development, validation, and manufacturing. You will build, wire, commission, operate, maintain, and troubleshoot test stands, test cells, control panels, data-acquisition systems, and production equipment. This opportunity is well suited for an electrical or electronics technician who enjoys solving equipment problems, working directly with test hardware, and helping bring new products and test systems online. What You Will Accomplish • Bring new test stands and electrical systems online safely, accurately, and on schedule., • Improve test-equipment reliability and reduce downtime through structured troubleshooting and preventive maintenance., • Generate dependable test data that supports product development, validation, and launch decisions., • Support prototype electronics and low-volume SMT builds for emerging automotive products., • Partner across engineering and manufacturing to improve safety, repeatability, quality, and efficiency.Key ResponsibilitiesTest Equipment and Electrical Systems, • Build, wire, modify, and troubleshoot electrical panels, control cabinets, cable assemblies, and wiring harnesses for test stands and production equipment., • Install sensors, instrumentation, electrical components, and data-acquisition hardware., • Support new test-stand commissioning, including wiring verification, functional checks, equipment checkout, and troubleshooting., • Set up and operate data-acquisition systems, DC power supplies, variable-frequency drives, and electrical instrumentation., • Use digital multimeters, oscilloscopes, power analyzers, and related diagnostic equipment to identify and resolve electrical issues., • Perform preventive maintenance, calibration support, and repairs on electrical and electronic test equipment., • Set up, operate, and maintain noise, vibration, and harshness (NVH) test-cell equipment., • Support root-cause analysis of test failures, equipment downtime, and inconsistent results.Product Testing and Validation, • Execute established test procedures for electric oil pumps, electric motors, and motor controllers., • Support functional, performance, endurance, and durability testing., • Monitor tests, evaluate equipment performance, and escalate abnormal conditions., • Record test results, equipment conditions, wiring changes, and corrective actions accurately., • Help maintain reliable operation of existing test stands and production fixtures.Electronics and Prototype Support, • Assemble, rework, inspect, and bring up printed circuit board assemblies and electronics prototypes., • Operate a low-volume, in-house surface-mount technology (SMT) production line., • Support pick-and-place programming, stencil printing, reflow profiling, and first-article inspection., • Assist engineering teams with prototype builds and new-product development activities.Technical Documentation and Collaboration, • Read, interpret, draft, and revise electrical schematics, wiring diagrams, and piping and instrumentation diagrams (P&IDs)., • Maintain clear documentation of equipment problems, test configurations, wiring updates, and repairs., • Partner with test, automation, product, and manufacturing teams to resolve equipment issues., • Follow established safety procedures when working with high-voltage and high-current automotive power-electronics systems.Minimum Qualifications, • Associate degree or technical certification in electrical technology, electronics technology, mechatronics, industrial automation, or a related discipline; or equivalent relevant hands-on experience., • Experience reading electrical schematics, wiring diagrams, or control-panel drawings., • Hands-on experience wiring, maintaining, or troubleshooting electrical panels, equipment, test systems, or industrial machinery., • Working knowledge of digital multimeters, oscilloscopes, power supplies, and other common electrical test equipment., • Foundational understanding of AC and DC power, basic motor controls, and low-voltage electrical systems., • Demonstrated mechanical and electrical troubleshooting skills., • Ability to document work accurately and follow defined test and safety procedures., • Ability to work effectively in a fast-paced engineering, laboratory, or manufacturing environment. Equivalent experience matters. Relevant technical training, military experience, apprenticeships, and directly related work experience will be considered. Preferred Qualifications You do not need to meet every preferred qualification to apply. Experience in one or more of the following areas is valuable: • LabVIEW, NI-DAQmx, National Instruments hardware, or comparable data-acquisition platforms., • Variable-frequency drives, brushless DC motors, permanent-magnet synchronous motors, or automotive motor controllers., • Controller Area Network (CAN) and Local Interconnect Network (LIN) communication and diagnostics., • Automotive electric oil pumps or other fluid-management components., • Cognex machine-vision systems, RFID, barcode, or manufacturing traceability equipment., • SMT equipment, including pick-and-place machines, stencil printers, and reflow ovens., • Printed circuit board assembly, soldering, component rework, inspection, or prototype bring-up., • NVH testing or operation of vibration, acoustic, or rotating-equipment test systems., • Industrial automation, programmable controls, sensors, and production fixtures., • Basic scripting or programming using Python, LabVIEW, or a similar tool., • Current forklift-operator certification.Benefits, Development, and Career Growth SLPT offers a comprehensive benefits package designed to support employees and their families. Specific plan eligibility and coverage details will be shared during the hiring process. • Medical, dental, and vision insurance., • Retirement savings plans., • Paid holidays and paid time off., • Professional development and technical training opportunities., • Exposure to global engineering programs, customers, and emerging automotive technologies., • A collaborative environment with opportunities to broaden skills in testing, automation, electronics, and product development., • Potential career paths in senior technician, test engineering, automation, manufacturing engineering, and technical leadership roles.Physical Requirements, • Frequently walk through manufacturing, laboratory, and production areas and stand for extended periods while operating, inspecting, or troubleshooting equipment., • Bend, stoop, kneel, crouch, reach, and climb ladders or platforms when necessary to access equipment., • Occasionally lift, carry, push, or pull items weighing up to 35 pounds., • Use hands and fingers to operate computers, measuring devices, hand tools, test equipment, and manufacturing interfaces., • Visually inspect products, equipment, tooling, wiring, and manufacturing processes., • Work safely around moving machinery, automation systems, forklifts, electrical panels, and industrial equipment., • Wear required personal protective equipment, including safety glasses, hearing protection, steel-toed footwear, gloves, and other designated equipment. SLPT will manage requests for reasonable accommodation through its established process, consistent with applicable requirements. Work Environment and Schedule • Work is performed in engineering laboratory, manufacturing, production, and office environments., • The position involves regular interaction with test stands, electrical panels, automation systems, production equipment, and plant-floor personnel., • The work environment may include machinery, elevated noise levels, temperature fluctuations, oils, lubricants, and other industrial materials., • Occasional travel to customer locations, supplier sites, or other SLPT facilities may be required., • Business needs may occasionally require overtime, weekend work, flexible hours, or alternative shifts. Specific schedule expectations will be discussed during the hiring process.How to Apply Ready to build, troubleshoot, and improve the systems behind next-generation automotive products? Apply today and join SLPT Automotive, where your technical skills and ideas help drive the future of mobility. Equal Employment Opportunity SLW Warren LLC, operating as SLPT Automotive, is committed to providing a work environment in which all individuals are treated with respect and dignity. We value diversity and believe an inclusive workplace strengthens our organization and supports our mission. SLW Warren provides equal employment opportunities to employees and applicants and prohibits discrimination and harassment. Employment decisions, including recruitment, hiring, placement, promotion, training, compensation, benefits, discipline, and termination, are based on business needs, job-related qualifications, and individual merit. #TestTechnician #ElectricalTechnician #ElectronicsTechnician #EngineeringTechnician #AutomotiveJobs #AutomotiveCareers #ElectricalTesting #ProductValidation #TestEngineering #DataAcquisition #LabVIEW #NIDAQ #MotorControls #ElectricMotors #PowerElectronics #SMT #PCBAssembly #IndustrialAutomation #CANBus #ElectricVehicles #MobilityTechnology #ManufacturingJobs #SkilledTrades #NowHiring #SLPTCareers

Job Description Robotics Engineer/Technician Location: Sterling Heights, MI Company: Indicon LLC Position Type: Full-Time Travel: Up to 50% (United States, Canada, and Mexico) About Indicon LLC Indicon LLC is a leading provider of industrial automation, robotics, machine vision, and manufacturing solutions for customers across multiple industries. While traditionally supporting automotive manufacturing, Indicon continues to expand into new markets and technologies, creating exciting opportunities for engineers who enjoy solving complex technical challenges and working directly with customers. We are seeking a motivated and hands-on Robotics Engineer/Robotics Technician who is eager to learn, enjoys technology, and thrives in a fast-paced environment. This role is ideal for someone who likes building, troubleshooting, and understanding how things work, whether that's robots, computers, machinery, or other technical systems. Position Summary As a Robotics Engineer, you will support a variety of robotics and automation projects ranging from small system modifications to large-scale installations valued from $5,000 to over $1 million. Project durations can range from a single day to over a year, providing exposure to diverse technologies, industries, and customer environments. This role requires a technically capable individual who can work independently after initial training, communicate effectively with customers, and adapt to different project needs. Successful candidates are naturally curious, proactive, and willing to travel to support customer projects throughout North America. Key Responsibilities • Program, troubleshoot, and support industrial robotic systems and automated manufacturing equipment., • Assist with machine vision integration, robotic applications, and automation solutions., • Support installation, commissioning, testing, and startup activities at customer facilities., • Work directly with customers to diagnose issues, provide technical support, and deliver solutions., • Collaborate with engineering and project teams across robotics, programming, paint, and flexible manufacturing environments., • Travel to customer sites throughout the United States, Canada, and Mexico as project needs require., • Continuously learn new technologies, systems, and industry applications., • Participate in project planning, documentation, system validation, and problem resolution activities., • Represent Indicon professionally while building strong customer relationships. Required Qualifications Top Must-Haves • 1-2+ years of experience in robotics, automation, controls, or a related engineering field., • Ability and willingness to travel approximately 50% of the time throughout North America., • Strong aptitude for learning new technologies and asking thoughtful questions to solve problems independently.

Job Description Technician / Technologist Location: Sterling Heights, MI Company: Indicon LLC Department: Controls Engineering / Field Services / Manufacturing Support Employment Type: Full-Time Position Summary Indicon LLC is seeking a motivated and hands-on Technician/Technologist to support the installation, commissioning, troubleshooting, and maintenance of industrial automation and control systems. This role is ideal for experienced technicians who have developed strong technical skills through practical field experience, military service, trade school, apprenticeships, or previous industrial automation work, regardless of whether they possess a four-year degree. The Technician/Technologist will work alongside engineers, project managers, electricians, and customers to deliver high-quality automation solutions for manufacturing, material handling, automotive, and industrial facilities. The successful candidate will assist with PLC-controlled equipment, control panels, conveyors, tooling systems, vision systems, and related automation technologies. Indicon specializes in controls design, system integration, material handling controls, tooling controls, vision systems, and UL-certified control panel fabrication. Essential Responsibilities • Assist with installation, startup, commissioning, and validation of automated control systems., • Troubleshoot electrical, controls, and automation-related issues on production and material handling equipment., • Perform panel checkout, I/O verification, wiring validation, and system testing., • Support PLC, HMI, VFD, barcode, scanner, and vision system integration activities., • Read and interpret electrical schematics, wiring diagrams, panel layouts, and technical documentation., • Assist engineers with equipment modifications, upgrades, and continuous improvement initiatives., • Conduct preventive maintenance and equipment inspections., • Support customer production launches and system start-ups as needed., • Identify and resolve equipment issues in a safe and timely manner., • Document troubleshooting activities, startup reports, punch-list items, and corrective actions., • Maintain compliance with customer, company, and safety requirements., • Travel to customer facilities for project support, startup, and service work as required. Required Qualifications • High school diploma or GED required., • Associate degree, technical certification, apprenticeship, military technical training, or equivalent experience preferred., • Relevant industrial experience may be considered in lieu of formal education., • Minimum 3+ years of experience in manufacturing, industrial automation, controls, maintenance, electrical systems, or related technical fields., • Ability to read electrical schematics and wiring drawings., • Experience using electrical testing equipment such as multimeters and network diagnostic tools., • Knowledge of industrial control systems and automation equipment., • Strong mechanical and electrical troubleshooting skills., • Valid driver's license and ability to travel as required. Preferred Qualifications • Experience with:, • Allen-Bradley/Rockwell Automation PLCs, • Siemens PLC systems, • HMIs and SCADA systems, • Industrial networking (Ethernet/IP, Profinet, DeviceNet), • Conveyor systems and material handling equipment, • Automotive manufacturing systems, • Vision inspection systems, • Control panel fabrication and assembly, • Previous experience supporting launch activities in manufacturing environments., • Industrial Robotics systems, including robot setup, troubleshooting, integration, and commissioning, • OSHA safety training or related certifications. Knowledge, Skills & Abilities • Strong hands-on troubleshooting and diagnostic capabilities., • Ability to work independently and within cross-functional project teams., • Excellent communication and customer-service skills., • Strong attention to detail and commitment to quality., • Ability to manage multiple tasks in fast-paced industrial environments., • Willingness to learn emerging automation technologies. Physical Requirements • Ability to stand, walk, kneel, climb ladders, and work in industrial environments., • Ability to lift up to 50 pounds., • Ability to work on manufacturing floors, in control panels, and around industrial equipment., • Ability to travel and occasionally work extended hours during project startups. Why Join Indicon? Indicon is a leading controls system integrator and UL-certified panel builder specializing in automation solutions for manufacturing and material handling industries. Team members have opportunities to work with cutting-edge automation technologies, collaborate with highly skilled engineers and technicians, and contribute to projects for some of the world's leading manufacturers.

Job Description 2nd Shift Maintenance Technician Warren, MI | Direct Hire | Up to $24/hr + 12% Shift Premium | M–F, 3:30 PM–12:00 AM The Adecco Permanent Recruitment Team is recruiting for an experienced Maintenance Technician to join a leading aerospace manufacturing operation in Warren, MI. This role is responsible for maintaining and repairing production equipment and facility systems, troubleshooting mechanical, hydraulic, and electrical issues, and helping keep manufacturing operations running safely and efficiently. Schedule & Compensation 2nd Shift: Monday–Friday, 3:30 PM–12:00 AM Up to $24/hr + 12% shift premium Overtime as needed Direct-hire opportunity $3,000 retention/sign-on bonus: $1,000 after 90 days and $2,000 at one year 80 hours of vacation/PTO, prorated for the remainder of the current year; full annual allotment begins January 1, 2027 32 floating holiday hours available from your start date Sick time Medical, dental, and vision coverage available after 30 days 401(k) match plus an additional 4% company contribution each year Potential on-call rotation with other maintenance team members Key Responsibilities Perform preventative maintenance and repairs on production machinery, facility equipment, and mechanical systems. Troubleshoot and repair hydraulic and electrical systems. Inspect equipment, identify root causes of failures, and make necessary repairs or adjustments to specifications. Read and interpret blueprints, electrical schematics, mechanical drawings, hydraulic diagrams, and equipment manuals. Work with outside vendors and contractors on equipment and facility repairs as needed. Perform maintenance involving industrial production systems, plumbing, controls, welding, fabrication, and hydraulics. Recommend equipment or process improvements to increase machine efficiency and uptime. Prioritize daily maintenance activities to keep production running safely and efficiently. Use hand and power tools, drill presses, measuring equipment, and electrical test equipment such as voltmeters. Maintain a clean and organized work area and properly store tools and materials after completing each job. Work additional hours when necessary to complete repairs and return equipment to service. Follow all required safety and environmental procedures. Qualifications 5+ years of maintenance experience in a manufacturing environment preferred; aerospace experience is a plus. Strong electrical troubleshooting and maintenance skills. Experience with industrial production equipment and mechanical systems. Knowledge of hydraulic systems, controls, plumbing, welding, and fabrication. Ability to read and interpret blueprints, schematics, drawings, and technical manuals. Basic PLC knowledge. Basic computer skills. Ability to safely operate drill presses, hand/power tools, measuring equipment, and electrical test equipment. Strong troubleshooting, analytical, and problem-solving skills. Ability to manage multiple priorities in a fast-paced, schedule-driven manufacturing environment. Strong attention to detail and ability to complete assignments accurately and on time. Strong communication skills and ability to work effectively with all levels of personnel. Education High School Diploma or GED required. Apprenticeship, Associate Degree, or technical/trade certification preferred. What We're Looking For The ideal candidate is a hands-on maintenance professional who can independently troubleshoot electrical, mechanical, hydraulic, and production equipment issues and understands the importance of minimizing downtime in a manufacturing environment. Pay Details: $22.00 to $24.00 per hour Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Dana is a global leader in the supply of highly engineered driveline, sealing, and thermal-management technologies that improve the efficiency and performance of vehicles with both conventional and alternative-energy powertrains. Serving three primary markets - passenger vehicle, commercial truck, and off-highway equipment - Dana provides the world's original-equipment manufacturers and the aftermarket with local product and service support through a network of nearly 100 engineering, manufacturing, and distribution facilities. Current Starting Base Wage = $21.00 2nd & 3rd Shifts earn an additional $0.50 cents per hour for shift premium JOB TITLE: Manufacturing Technician LOCATION: Production Warren IMMEDIATE SUPERVISOR: Area Supervisor POSITIONS SUPERVISED: N/A GENERAL SUMMARY: Set-up, operate and maintain standard and complex manufacturing processes consistent with approved engineering standards and quality parameters. To be an active participant in line/cell teams, contribute to the company's vision and goals, while safely operating production equipment. JOB RESPONSIBILITIES: • 1. Operate equipment to accepted safety and production standards., • 2. Maintain clean and safe work area utilizing 5S methodologies and in accordance with hazard assessment., • 3. Actively participate in problem solving, continuous improvement and teaming activities utilizing the following methodologies:, • Use and maintain product and process controls utilizing Dynamic Control Plan (DCP) methodology., • Participate in problem solving activities utilizing 8D and Poka-Yoke methodology., • Strive for quality improvement and cost reduction, utilizing continuous improvement methodologies., • Support in training and development of new team members., • Work in and promote teamwork., • 4. Maintain and utilize Statistical Process Control (SPC), Quality Operating System (QOS) measurables and all Dana reporting documentation., • 5. Maintain and verify all quality gaging, Poka-Yokes and mistake proof devices in accordance with Dana engineered specifications., • 6. Verify and maintain just-in-time inventory based on pull system., • 7. Ensure that equipment is serviced as required utilizing Total Productive Maintenance (TPM) methodology., • 8. Set-up all equipment in the entire cell to accepted engineering standards, utilizing quick changeover methodology., • 9. Determine what repairs are required based on MRB documents. *10. Must be able to use hand gages, (micrometers, calipers, snap gages and master gages). *11. Notify supervisor of issues or problems. *12. DOT training if required Hilo driving. *13. Perform other duties as assigned by area supervisor. KNOWLEDGE, SKILLS AND ABILITIES: • 1. High school diploma, GED or equivalent work experience., • 2. Must be willing to work in a team environment., • 3. Ability to communicate effectively in both written and verbal form, as required., • 4. Must have a positive attitude., • 5. Must be willing to assume responsibility and be accountable for their actions., • 6. Create and work in an environment of respect and integrity., • 7. Helpful to be mechanically inclined., • 8. Must have the ability to be trained in skills required per the training matrix. *9. Must be able to lift up to 50 pounds without a manipulator (lift assist). We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Unsolicited Resumes from Third-Party Recruiters Please note that as per Dana policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Dana will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Join our team of 28,000 problem solvers who are fostering a culture of innovation by leveraging the diverse perspectives of our global team. We believe in facing challenges head-on by finding opportunity and uncovering possibility, where roadblocks and barriers become targets instead of obstacles. We are One Dana with limitless opportunity. Our Values • Value Others, • Inspire Innovation, • Grow Responsibly, • Win Together