Trabajos nail technicians en Georgia

By clicking the “Apply” button, I understand that my employment application process with Takeda will commence and that the information I provide in my application will be processed in line with Takeda’s ___ and ___. I further attest that all information I submit in my employment application is true to the best of my knowledge. The Utilities Technician is responsible for the operation, maintenance, and troubleshooting of plant equipment that supports utilities including but not limited to high-pressure steam boilers; chillers; heating/cooling air handling units; process wastewater treatment systems; water purification system (water softening and carbon bed filtration, reverse osmosis, continuous deionization equipment, sanitary pumps, multi-effect distillation equipment); tank mixers; air compressors and dryers; and chilled water distribution systems under minimum supervision of the utilities supervisor in rotation shift environment. Performs corrective maintenance and routine preventative maintenance on plant utilities equipment following Standard Operating Procedures (SOPs) as necessary. Completing work orders, logs and forms following cGMP documentation practices and Quality Standards in a Pharmaceutical Manufacturing facility is mandatory. This senior position is responsible for performing daily checks and maintenance on facility equipment and systems while adhering to cGMP standards and corporate safety policies. • Perform preventive, corrective and predictive maintenance of all associated equipment., • Operate and maintain various equipment through routine inspection and review., • All work must be completed in accordance with cGMPs, SOPs, job plans, and company policies., • Read, understand, and follow related SOPs and job/work plans., • Ensure that forms and work order documentation are completed with accurate information., • Responds to calls and conduct repairs throughout the facility. May be assigned to escort a contractor performing work on the premises., • Provide support for the start-up of new equipment to ensure it meets all mechanical design specifications., • Develop a proficiency in three or more advanced maintenance technologies and understand how to apply technology to improve equipment reliability, e.g., alignment, balancing, thermography, oil analysis, ultrasound, or vibration monitoring., • Must follow safety rules and ensure compliance with GA state and federal EPA regulations and laws., • Collect and Analyze daily WWTP as per procedure, • Perform chemical / parameter adjustment in WWTP as need it to maintain the system in compliance, • Perform Disposal of Hazardous Waste, • Respond to urgent and emergency work orders for the utilities department as needed., • Responsible for closing assigned work orders in the CMMS (JDE, Maximo, SAP)., • Attend required Instructor Lead Training and planned team meetings, • Demonstrate continuous progress with respect to increasing job knowledge and proficiency in technical understanding/problem-solving., • Order and Maintain chemical inventory, • Keeps designated area 5S'd. (Safety, Sort, Shine, Standardize, Sustain), • Ability to teach basic activities and work execution to other technicians., • Maintain a positive, professional, and customer-oriented attitude. Communicate any concerns related to safe work practices, hostile work environment, sexual harassment or any other type of employee misconduct directly to their supervisor, or management., • This position will receive general instruction on routine work with detailed instruction on new assignments. Often will be assigned to work with a less experienced, utilities or maintenance technician., • Primarily interacts with Plant Engineering Department personnel. Moderate interaction with other departments., • May perform other duties as assigned., • Provide a limited level of troubleshooting, diagnostic, and repair of building systems, equipment, and equipment components., • Manufacturing equipment vessels, mixers, valves, and pumps., • Operate general laboratory equipment to assess the analytical status of the utilities process., • Typically requires a high school diploma or GED plus 8+ years of related industrial related experience. Pharmaceutical, utilities, and/or WWTP experience preferred., • Two-year certificate in a technical field such as HVAC, building trades or building utilities program, or equivalent military experience is preferred., • 5-6 years of experience in the maintenance trades is preferred, • Ability to read and understand technical manuals and wiring schematics, • Must have good customer service skills and promote a teamwork environment, • Must have GA Industrial Wastewater Operator license or higher (or ability to get it within 90 days of employment), • Ability to effectively communicate ideas through verbal and written form., • Ability to read and understand procedures, schematics, and job blueprints., • Familiar with CMMS, SAP, JDE, and or Maximo, • Must be able to understand cGMPs and other regulatory guidelines applicable to the medical/pharmaceutical industry., • Excellent technical troubleshooting/problem solving skills are a must. Must be knowledgeable with respect to the operation and maintenance of various utility systems including DAF, Centrifuge, Aeration Basins, Blowers, Pumps and others., • Familiarity with Microsoft Office Applications, SCADA, process control software, and other computer base applications At Takeda, our patients rely on us to deliver quality products. As a result, we must follow strict rules in our manufacturing facilities to ensure we are not endangering the quality of the product. In this role, you may: • Work in a controlled environment requiring special gowning and wear protective clothing over the head, face, hands, feet and body. This may include additional hearing protection for loud areas., • Need to remove all make-up, jewelry, contact lenses, nail polish and/or artificial fingernails while in the manufacturing environment., • Work in a cold, wet environment., • Work multiple shifts, including weekends, or be asked to work supplemental hours, as necessary., • May be exposed to sunlight and heat., • May be exposed to dust, gases, and fumes., • May be required to stand and walk frequently while evaluating utilities equipment., • May be around moving equipment and machinery., • May climb up and into large tanks for inspection., • May work in a loud area that requires hearing protection and other protective equipment to be worn., • May be required to work or be assigned to a different shift as needed., • Must be able to work 12-hour shifts and rotate(2/2/3) with assigned shifts., • Overtime may be required at times., • Requires performing activities within the plant utilities equipment, mechanical work, and computer-based activities., • May be required to lift up to 50 pounds when managing chemicals., • No travel is expected with this position. At Takeda, we are transforming patient care through the development of novel specialty pharmaceuticals and best in class patient support programs. Takeda is a patient-focused company that will inspire and empower you to grow through life-changing work. Certified as a Global Top Employer, Takeda offers stimulating careers, encourages innovation, and strives for excellence in everything we do. We foster an inclusive, collaborative workplace, in which our teams are united by an unwavering commitment to deliver Better Health and a Brighter Future to people around the world. #GMSGQ #ZR1 #LI-MA1 Takeda Compensation and Benefits Summary We understand compensation is an important factor as you consider the next step in your career. We are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. For Location: USA - GA - Social Circle - Hwy 278 U.S. Hourly Wage Range: $32.64 - $51.30 The estimated hourly wage range reflects an anticipated range for this position. The actual hourly wage offered may depend on a variety of factors, including the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. The actual hourly wage offered will be in accordance with state or local minimum wage requirements for the job location. U.S. based employees may be eligible for short-term incentives. U.S. based employees may be eligible to participate in medical, dental, vision insurance, a 401(k) plan and company match, short-term and long-term disability coverage, basic life insurance, a tuition reimbursement program, paid volunteer time off, company holidays, and well-being benefits, among others. U.S. based employees are also eligible to receive, per calendar year, up to 80 hours of sick time, and new hires are eligible to accrue up to 120 hours of paid vacation. EEO Statement Takeda is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, status as a Vietnam era veteran, special disabled veteran, or other protected veteran in accordance with applicable federal, state and local laws, and any other characteristic protected by law. USA - GA - Social Circle - Hwy 278 Employee Regular Full time Job Exempt No

By clicking the “Apply” button, I understand that my employment application process with Takeda will commence and that the information I provide in my application will be processed in line with Takeda’s ___ and ___. I further attest that all information I submit in my employment application is true to the best of my knowledge. The Utilities Technician - electrician is responsible for the operation, maintenance, and troubleshooting of plant equipment that supports utilities including but not limited to high-pressure steam boilers; chillers; heating/cooling air handling units; process wastewater treatment systems; water purification system (water softening and carbon bed filtration, reverse osmosis, continuous deionization equipment, sanitary pumps, multi-effect distillation equipment); tank mixers; air compressors and dryers; and chilled water distribution systems under minimum supervision of the utilities supervisor in rotation shift environment. Performs corrective maintenance and routine preventative maintenance on plant utilities equipment following Standard Operating Procedures (SOPs) as necessary. Completing work orders, logs and forms following cGMP documentation practices and Quality Standards in a Pharmaceutical Manufacturing facility is mandatory. This senior position is responsible for performing daily checks and maintenance on facility equipment and systems while adhering to cGMP standards and corporate safety policies. • Perform preventive, corrective and predictive maintenance of all associated equipment., • Operate and maintain various equipment through routine inspection and review., • All work must be completed in accordance with cGMPs, SOPs, job plans, and company policies., • Read, understand, and follow related SOPs and job/work plans., • Ensure that forms and work order documentation are completed with accurate information., • Responds to calls and conduct repairs throughout the facility. May be assigned to escort a contractor performing work on the premises., • Provide support for the start-up of new equipment to ensure it meets all electrical design specifications., • Repair, replace and install sensors, actuators, transformers, controllers, circuit breakers, motors, heating units, electric eyes, conduit systems, switches, defective writing, etc., • Troubleshoot, repair, and replace PLCs, Servo and Frequency Drives, and related electronic hardware, • Disassembles, inspects, reassembles, troubleshoots, repairs, and replaces malfunctioning parts or equipment (motors, switches, sensors, input /output boards, controllers servos, gears, sprockets chains, knives, etc. using test equipment, • Must follow safety rules and ensure compliance with GA state and federal EPA regulations and laws., • Perform Disposal of Hazardous Waste, • Respond to urgent and emergency work orders for the utilities department as needed., • Responsible for closing assigned work orders in the CMMS (JDE, Maximo, SAP)., • Attend required Instructor Lead Training and planned team meetings, • Demonstrate continuous progress with respect to increasing job knowledge and proficiency in technical understanding/problem-solving., • Keeps designated area 5S'd. (Safety, Sort, Shine, Standardize, Sustain), • Ability to teach basic activities and work execution to other technicians., • This position will receive general instruction on routine work with detailed instruction on new assignments. Often will be assigned to work with a less experienced, utilities or maintenance technician., • Primarily interacts with Plant Engineering Department personnel. Moderate interaction with other departments., • May perform other duties as assigned., • Typically requires a high school diploma or GED plus 8+ years of related industrial related experience. Pharmaceutical, utilities, and/or WWTP experience preferred., • Two-year certificate in a technical field such as Electrician, • Proficiency in electrical circuits, schematics, servo motors, and familiarity with 460/220 3 PH wiring. HVAC, building trades or building utilities program, or equivalent military experience is preferred., • 5-6 years of experience in the maintenance trades is preferred, • Ability to read and understand technical manuals and wiring schematics, • Must have good customer service skills and promote a teamwork environment, • Ability to effectively communicate ideas through verbal and written form., • Intermediate computer skills., • Ability to interact constructively with peers and other teams., • Ability to seek outside resources as needed., • Ability to read and understand procedures, schematics, and job blueprints., • Provide a limited level of troubleshooting, diagnostic, and repair of building systems, equipment, and equipment components., • Manufacturing equipment vessels, mixers, valves, and pumps., • Operate general laboratory equipment to assess the analytical status of the utilities process., • Familiar with CMMS, SAP, JDE, and or Maximo, • Must be able to understand cGMPs and other regulatory guidelines applicable to the medical/pharmaceutical industry., • Familiarity with Microsoft Office Applications, SCADA, process control software, and other computer base applications At Takeda, our patients rely on us to deliver quality products. As a result, we must follow strict rules in our manufacturing facilities to ensure we are not endangering the quality of the product. In this role, you may: • Work in a controlled environment requiring special gowning and wear protective clothing over the head, face, hands, feet and body. This may include additional hearing protection for loud areas., • Need to remove all make-up, jewelry, contact lenses, nail polish and/or artificial fingernails while in the manufacturing environment., • Work in a cold, wet environment., • Work multiple shifts, including weekends, or be asked to work supplemental hours, as necessary., • Work around chemicals such as alcohol, acids, buffers and Celite that may require respiratory protection., • May be exposed to sunlight and heat., • May be exposed to dust, gases, and fumes., • May be required to stand and walk frequently while evaluating utilities equipment., • May be around moving equipment and machinery., • May climb up and into large tanks for inspection., • May work in a loud area that requires hearing protection and other protective equipment to be worn., • May be required to work or be assigned to a different shift as needed., • Must be able to work 12-hour shifts and rotate(2/2/3) with assigned shifts., • Overtime may be required at times., • Requires performing activities within the plant utilities equipment, mechanical work, and computer-based activities., • May be required to lift up to 50 pounds when managing chemicals., • No travel is expected with this position. At Takeda, we are transforming patient care through the development of novel specialty pharmaceuticals and best in class patient support programs. Takeda is a patient-focused company that will inspire and empower you to grow through life-changing work. Certified as a Global Top Employer, Takeda offers stimulating careers, encourages innovation, and strives for excellence in everything we do. We foster an inclusive, collaborative workplace, in which our teams are united by an unwavering commitment to deliver Better Health and a Brighter Future to people around the world. #GMSGQ #ZR1 #LI-MA1 Takeda Compensation and Benefits Summary We understand compensation is an important factor as you consider the next step in your career. We are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. For Location: USA - GA - Social Circle - Hwy 278 U.S. Hourly Wage Range: $32.64 - $51.30 The estimated hourly wage range reflects an anticipated range for this position. The actual hourly wage offered may depend on a variety of factors, including the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. The actual hourly wage offered will be in accordance with state or local minimum wage requirements for the job location. U.S. based employees may be eligible for short-term incentives. U.S. based employees may be eligible to participate in medical, dental, vision insurance, a 401(k) plan and company match, short-term and long-term disability coverage, basic life insurance, a tuition reimbursement program, paid volunteer time off, company holidays, and well-being benefits, among others. U.S. based employees are also eligible to receive, per calendar year, up to 80 hours of sick time, and new hires are eligible to accrue up to 120 hours of paid vacation. EEO Statement Takeda is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, status as a Vietnam era veteran, special disabled veteran, or other protected veteran in accordance with applicable federal, state and local laws, and any other characteristic protected by law. USA - GA - Social Circle - Hwy 278 Employee Regular Full time Job Exempt No

By clicking the “Apply” button, I understand that my employment application process with Takeda will commence and that the information I provide in my application will be processed in line with Takeda’s Privacy Notice and Terms of Use. I further attest that all information I submit in my employment application is true to the best of my knowledge. Job Description About the role: The Utilities Technician - electrician is responsible for the operation, maintenance, and troubleshooting of plant equipment that supports utilities including but not limited to high-pressure steam boilers; chillers; heating/cooling air handling units; process wastewater treatment systems; water purification system (water softening and carbon bed filtration, reverse osmosis, continuous deionization equipment, sanitary pumps, multi-effect distillation equipment); tank mixers; air compressors and dryers; and chilled water distribution systems under minimum supervision of the utilities supervisor in rotation shift environment. Performs corrective maintenance and routine preventative maintenance on plant utilities equipment following Standard Operating Procedures (SOPs) as necessary. Completing work orders, logs and forms following cGMP documentation practices and Quality Standards in a Pharmaceutical Manufacturing facility is mandatory. This senior position is responsible for performing daily checks and maintenance on facility equipment and systems while adhering to cGMP standards and corporate safety policies. How you will contribute: - Perform preventive, corrective and predictive maintenance of all associated equipment. - Operate and maintain various equipment through routine inspection and review. - All work must be completed in accordance with cGMPs, SOPs, job plans, and company policies. - Read, understand, and follow related SOPs and job/work plans. - Ensure that forms and work order documentation are completed with accurate information. - Responds to calls and conduct repairs throughout the facility. May be assigned to escort a contractor performing work on the premises. - Provide support for the start-up of new equipment to ensure it meets all electrical design specifications. - Repair, replace and install sensors, actuators, transformers, controllers, circuit breakers, motors, heating units, electric eyes, conduit systems, switches, defective writing, etc. - Troubleshoot, repair, and replace PLCs, Servo and Frequency Drives, and related electronic hardware - Disassembles, inspects, reassembles, troubleshoots, repairs, and replaces malfunctioning parts or equipment (motors, switches, sensors, input /output boards, controllers servos, gears, sprockets chains, knives, etc. using test equipment - Must follow safety rules and ensure compliance with GA state and federal EPA regulations and laws. - Perform Disposal of Hazardous Waste - Respond to urgent and emergency work orders for the utilities department as needed. - Responsible for closing assigned work orders in the CMMS (JDE, Maximo, SAP). - Attend required Instructor Lead Training and planned team meetings - Demonstrate continuous progress with respect to increasing job knowledge and proficiency in technical understanding/problem-solving. - Keeps designated area 5S'd. (Safety, Sort, Shine, Standardize, Sustain) - Ability to teach basic activities and work execution to other technicians. - This position will receive general instruction on routine work with detailed instruction on new assignments. Often will be assigned to work with a less experienced, utilities or maintenance technician. - Primarily interacts with Plant Engineering Department personnel. Moderate interaction with other departments. - May perform other duties as assigned. What you bring to Takeda: - Typically requires a high school diploma or GED plus 8+ years of related industrial related experience. Pharmaceutical, utilities, and/or WWTP experience preferred. - Two-year certificate in a technical field such as Electrician - Proficiency in electrical circuits, schematics, servo motors, and familiarity with 460/220 3 PH wiring. HVAC, building trades or building utilities program, or equivalent military experience is preferred. - 5-6 years of experience in the maintenance trades is preferred - Ability to read and understand technical manuals and wiring schematics - Must have good customer service skills and promote a teamwork environment - Ability to effectively communicate ideas through verbal and written form. - Intermediate computer skills. - Ability to interact constructively with peers and other teams. - Ability to seek outside resources as needed. - Ability to read and understand procedures, schematics, and job blueprints. - Provide a limited level of troubleshooting, diagnostic, and repair of building systems, equipment, and equipment components. - Manufacturing equipment vessels, mixers, valves, and pumps. - Operate general laboratory equipment to assess the analytical status of the utilities process. - Familiar with CMMS, SAP, JDE, and or Maximo - Must be able to understand cGMPs and other regulatory guidelines applicable to the medical/pharmaceutical industry. - Familiarity with Microsoft Office Applications, SCADA, process control software, and other computer base applications Important Considerations: At Takeda, our patients rely on us to deliver quality products. As a result, we must follow strict rules in our manufacturing facilities to ensure we are not endangering the quality of the product. In this role, you may: - Work in a controlled environment requiring special gowning and wear protective clothing over the head, face, hands, feet and body. This may include additional hearing protection for loud areas. - Need to remove all make-up, jewelry, contact lenses, nail polish and/or artificial fingernails while in the manufacturing environment. - Work in a cold, wet environment. - Work multiple shifts, including weekends, or be asked to work supplemental hours, as necessary. - Work around chemicals such as alcohol, acids, buffers and Celite that may require respiratory protection. - May be exposed to sunlight and heat. - May be exposed to dust, gases, and fumes. - May be required to stand and walk frequently while evaluating utilities equipment. - May be around moving equipment and machinery. - May climb up and into large tanks for inspection. - May work in a loud area that requires hearing protection and other protective equipment to be worn. - May be required to work or be assigned to a different shift as needed. - Must be able to work 12-hour shifts and rotate(2/2/3) with assigned shifts. - Overtime may be required at times. - Requires performing activities within the plant utilities equipment, mechanical work, and computer-based activities. - May be required to lift up to 50 pounds when managing chemicals. - No travel is expected with this position. More about us: At Takeda, we are transforming patient care through the development of novel specialty pharmaceuticals and best in class patient support programs. Takeda is a patient-focused company that will inspire and empower you to grow through life-changing work. Certified as a Global Top Employer, Takeda offers stimulating careers, encourages innovation, and strives for excellence in everything we do. We foster an inclusive, collaborative workplace, in which our teams are united by an unwavering commitment to deliver Better Health and a Brighter Future to people around the world. #GMSGQ #ZR1 #LI-MA1 Takeda Compensation and Benefits Summary We understand compensation is an important factor as you consider the next step in your career. We are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. For Location: USA - GA - Social Circle - Hwy 278 U.S. Hourly Wage Range: $32.64 - $51.30 The estimated hourly wage range reflects an anticipated range for this position. The actual hourly wage offered may depend on a variety of factors, including the qualifications of the individual applicant for the position, years of relevant experience, specific and unique skills, level of education attained, certifications or other professional licenses held, and the location in which the applicant lives and/or from which they will be performing the job. The actual hourly wage offered will be in accordance with state or local minimum wage requirements for the job location. U.S. based employees may be eligible for short-term incentives. U.S. based employees may be eligible to participate in medical, dental, vision insurance, a 401(k) plan and company match, short-term and long-term disability coverage, basic life insurance, a tuition reimbursement program, paid volunteer time off, company holidays, and well-being benefits, among others. U.S. based employees are also eligible to receive, per calendar year, up to 80 hours of sick time, and new hires are eligible to accrue up to 120 hours of paid vacation. EEO Statement Takeda is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, status as a Vietnam era veteran, special disabled veteran, or other protected veteran in accordance with applicable federal, state and local laws, and any other characteristic protected by law. Locations USA - GA - Social Circle - Hwy 278 Worker Type Employee Worker Sub-Type Regular Time Type Full time Job Exempt No

Job Description ✨ Join the Team at D’yVonne’s Nails and Beauty Bar ✨ Now Interviewing for: Salon Assistant We’re looking for a dependable, energetic, and service-oriented individual to support our growing salon. If you’re passionate about beauty, enjoy working in a team, and thrive in a fast-paced environment, we’d love to hear from you. Ideal Candidate Qualities: • Reliable and punctual, • Excellent customer service skills, • Team player with a positive attitude, • Strong organizational and communication abilities Key Responsibilities: • Assist nail technicians with daily tasks, • Maintain overall salon cleanliness and hygiene standards, • Schedule client appointments and manage bookings, • Handle front desk operations and phone inquiries, • Perform light administrative duties and ad hoc tasks, • Prepare and balance weekly payroll, • Create and manage weekly staff work schedules, • Ensure pedicure area is clean and well-stocked ✨ Comprehensive training will be provided upon hire. To Apply: Call us at 404.615.0775 Email your resume to Follow us on Instagram: @dyvonnesnailsandbeautybar Would you like help turning this into a printable flyer or a social media post with visual flair?

Job Description At Beaver Mazda, we’re not just about fixing or selling cars—we’re about building relationships and providing world-class service. That’s why we’re the #1 dealer in customer retention and why we invest in our team’s success. We need Automotive Technicians who are passionate about their craft, eager to grow, and ready to work in an environment that values and supports them. If you're ready to take your career to the next level, we want you on our team! What We Offer • Competitive Pay & Incentives – Earn top-tier compensation, • $500 Vehicle Credit – Receive $500 toward a vehicle when you achieve Master Technician status, • Special Family Days Off – Enjoy a paid day off for your child’s or spouse’s birthday—because family comes first, • Fully equipped onsite gym with access to a personal trainer., • Onsite hair salon & nail salon for convenience and self-care., • Onsite restaurant offering delicious meal options., • 401(k) Retirement Plan, Health, Vision, and Life Insurance, Health Savings Account, Paid Time Off, • Annual Team Celebration – Join us for a huge Christmas Party to recognize our success and camaraderie What You’ll Do • Perform vehicle maintenance, diagnostics, and repairs efficiently and accurately., • Ensure all work meets or exceeds manufacturer quality standards., • Collaborate with the service team to provide outstanding customer experience., • Stay up to date with the latest automotive technologies and repair techniques. What We’re Looking For • Experience as an Automotive Technician., • Strong diagnostic skills and a passion for the automotive industry., • Commitment to quality and customer satisfaction., • Ability to work effectively as part of a team., • A drive to grow and advance within the company. Additional Details • Job Type: Full-time, • Location: In-person in Cumming, GA (must be able to commute or relocate before starting). My Promise At Beaver Mazda, we believe in creating a workplace where we celebrate each other’s success, it’s cool to care, we take pride in our work, and we push each other to be the best at what we do. If you're looking for a place where your effort is valued, your growth is encouraged, and you’re surrounded by a team that genuinely cares, we’d love to have you on board. We believe that our success begins with yours. Success means something completely different depending on the individual. It is my promise to you that we are fully dedicated helping you realize success as you define it. Welcome to Beaver Mazda.

Job Description At Beaver Mazda, we’re building something special—a dealership where passion, energy, and commitment drive everything we do. Our team is small but mighty, and every member plays a critical role in our success. This is a place for go-getters who bring intensity, accountability, and a drive to see things through. We need a Service Advisor who thrives in a fast-paced, high-energy environment, is eager to learn, and is ready to help build a dealership from the ground up. If you love Mazda’s performance-driven lineup, enjoy helping people, and have the grit and determination to make things happen, we want you on our team. What We Offer • Competitive Pay & Longevity Bonuses – Earn between $70,000 - $200,000 annually, plus Christmas bonuses as a token of our appreciation., • Special Family Days Off – Celebrate life’s most important moments with paid time off for your spouse’s and children’s birthdays.., • Fully equipped onsite gym to stay active and healthy., • Onsite hair salon & nail salon for convenience and self-care., • Onsite restaurant offering delicious meals so you can fuel your day without leaving work., • 401(k) Retirement Plan, Health, Vision, and Life Insurance, Health Savings Account, Paid Time Off What You’ll Do • Be the primary point of contact between customers and the service department., • Greet customers, understand their vehicle service needs, and offer recommendations., • Schedule service appointments and maintain accurate customer records., • Provide clear explanations of repairs and ensure customer satisfaction., • Coordinate with technicians and service teams to ensure an efficient workflow. What We’re Looking For • Previous experience in an automotive service advisor or customer service role is preferred but not required., • Strong communication and interpersonal skills., • Excellent organizational skills and attention to detail., • A positive attitude, strong work ethic, and team-oriented mindset., • Valid driver’s license (required)., • Spanish-speaking ability is a plus. Additional Details • Job Type: Full-time, • Shift: 10-hour shifts, including weekends (rotating schedule)., • Location: In-person in Cumming, GA (must be able to commute or relocate before starting). My Promise At Beaver Mazda, we believe in creating a workplace where we celebrate each other’s success, it’s cool to care, we take pride in our work, and we push each other to be the best at what we do. If you're looking for a place where your effort is valued, your growth is encouraged, and you’re surrounded by a team that genuinely cares, we’d love to have you on board. We believe that our success begins with yours. Success means something completely different depending on the individual. It is my promise to you that we are fully dedicated helping you realize success as you define it. Welcome to Beaver Mazda.

Job Description At Beaver Mazda, we’re building something special—a dealership where passion, energy, and commitment drive everything we do. Our team is small but mighty, and every member plays a critical role in our success. This is a place for go-getters who bring intensity, accountability, and a drive to see things through. We’re looking for a Service Advisor who thrives in a fast-paced, high-energy environment, is eager to learn, and is ready to help build a dealership from the ground up. If you love Mazda’s performance-driven lineup, enjoy helping people, and have the grit and determination to make things happen, we want you on our team. What We Offer • Competitive Pay & Longevity Bonuses – Earn between $70,000 - $200,000 annually, plus Christmas bonuses as a token of our appreciation., • Special Family Days Off – Celebrate life’s most important moments with paid time off for your spouse’s and children’s birthdays., • Double Toyota Factory Incentives – We double Toyota’s factory incentives to help our team maximize their earnings., • Fully equipped onsite gym to stay active and healthy., • Onsite hair salon & nail salon for convenience and self-care., • Onsite restaurant offering delicious meals so you can fuel your day without leaving work., • Be the primary point of contact between customers and the service department., • Greet customers, understand their vehicle service needs, and offer recommendations., • Schedule service appointments and maintain accurate customer records., • Provide clear explanations of repairs and ensure customer satisfaction., • Previous experience in an automotive service advisor or customer service role is preferred but not required., • Strong communication and interpersonal skills., • Excellent organizational skills and attention to detail., • A positive attitude, strong work ethic, and team-oriented mindset., • Valid driver’s license (required)., • Job Type: Full-time, • Shift: 10-hour shifts, including weekends (rotating schedule). We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description At Beaver Mazda, we’re not just about fixing or selling cars—we’re about building relationships and providing world-class service. That’s why we’re the #1 dealer in customer retention and why we invest in our team’s success. We need Automotive Technicians who are passionate about their craft, eager to grow, and ready to work in an environment that values and supports them. If you're ready to take your career to the next level, we want you on our team! What We Offer • Competitive Pay & Incentives – Earn top-tier compensation, • $500 Vehicle Credit – Receive $500 toward a vehicle when you achieve Master Technician status, • Special Family Days Off – Enjoy a paid day off for your child’s or spouse’s birthday—because family comes first, • Fully equipped onsite gym with access to a personal trainer., • Onsite hair salon & nail salon for convenience and self-care., • Onsite restaurant offering delicious meal options., • 401(k) Retirement Plan, Health, Vision, and Life Insurance, Health Savings Account, Paid Time Off, • Annual Team Celebration – Join us for a huge Christmas Party to recognize our success and camaraderie What You’ll Do • Perform vehicle maintenance, diagnostics, and repairs efficiently and accurately., • Ensure all work meets or exceeds manufacturer quality standards., • Collaborate with the service team to provide outstanding customer experience., • Stay up to date with the latest automotive technologies and repair techniques. What We’re Looking For • Experience as an Automotive Pre-Owned Technician., • Strong diagnostic skills and a passion for the automotive industry., • Commitment to quality and customer satisfaction., • Ability to work effectively as part of a team., • A drive to grow and advance within the company. Additional Details • Job Type: Full-time, • Location: In-person in Cumming, GA (must be able to commute or relocate before starting). My Promise At Beaver Mazda, we believe in creating a workplace where we celebrate each other’s success, it’s cool to care, we take pride in our work, and we push each other to be the best at what we do. If you're looking for a place where your effort is valued, your growth is encouraged, and you’re surrounded by a team that genuinely cares, we’d love to have you on board. We believe that our success begins with yours. Success means something completely different depending on the individual. It is my promise to you that we are fully dedicated helping you realize success as you define it. Welcome to Beaver Mazda.

Job Description About Belle Belle is a fast growing engagement company that is revolutionizing home healthcare – and it all begins with the feet. With 25M+ U.S. seniors no longer able to see or reach their feet, a lack of self care and mobility challenges cost the health insurance plans $38B+ in preventable medical spending every year. Belle trains and manages a network of nail technicians or “Belle Technicians” who provide in-home foot care (aka medical pedicures). Belle uses cutting edge data science to identify those most in need on behalf of health plans and deploys its services accordingly. While in the home, Belle Technicians complete assessments and screenings, often being the first to identify emerging issues below and above the knee. As these issues arise, a team of remote nurses coordinate care with other healthcare providers - preventing serious and costly episodes. Our mission: Bring Joy to Healthcare. Join us if our cause inspires you! About this Role This is a full-time position and hours of work and days vary Monday through Friday 9:00 am to 5:00 pm. Occasional evening and weekend work may be required, as needed. This position involves extensive daily travel throughout your local region. Responsibilities: • Specialize in senior therapeutic foot case, prioritizing lower extremity health and safety., • Adhere to Belle protocols to guarantee a hygienic service, minimizing the risk of infection., • Conduct thorough foot assessments using Belle’s mobile application during each service to escalate clinical concerns and observations, • Cultivate a positive rapport with members, fostering trust to effectively convey foot care education and promote enduring foot health., • Keep accurate member records, ensuring HIPAA compliance and effective communication with Belle’s administrative team., • Ensure punctuality for all appointments through consistent good attendance and proper automobile maintenance., • Updates job knowledge by participating in Belle-provided continuing educational opportunities, • Promotes and assist with the booking of future appointments for members prior to ending the appointment, • Must be 18 years of age or older, • Valid National-Interstate Council of State Boards of Cosmetology’s and/or state required Nail Technician Licensure (based on role location), • May not be debarred or excluded from participation in Medicare, Medicaid, FEHBP or any other federal or state government programs, • Valid Driver’s License and adequate car insurance is required, • Able to maintain reliable transportation, • Basic mobile device skills, • Completing and passing required credential checks (based on state location) including, but not limited to, a background check and drug test., • Frequently required to stand, walk, sit, use hands, handle documents and phone/tablet, and reach with hands and arms for extended periods of time Benefits • Competitive salary based on experience, • Health, dental and vision benefits, • 401k (non-matching), • PTO and Sick Time, • Flexible work environment, • Foot care services for yourself, • Opportunity for significant career growth and expansion of responsibilities, • Ability to reshape an industry and protect lives Belle is an Equal Employment Opportunity employer that proudly pursues and hires a diverse workforce. Belle does not make hiring or employment decisions on the basis of race, color, religion or religious belief, ethnic or national origin, nationality, sex, gender, gender-identity, sexual orientation, disability, age, military or veteran status, or any other basis protected by applicable local, state, or federal laws or prohibited by Company policy. Belle also strives for a healthy and safe workplace and strictly prohibits harassment of any kind. Belle participates in E-Verify, and post-offer background checks and drug screenings. Belle will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, Belle is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before Belle can take any adverse actions, including terminating your employment. Belle can only use E-Verify once you have accepted a job offer and completed the Form I-9. Belle is an Equal Employment Opportunity employer that proudly pursues and hires a diverse workforce. Belle does not make hiring or employment decisions on the basis of race, color, religion or religious belief, ethnic or national origin, nationality, sex, gender, gender-identity, sexual orientation, disability, age, military or veteran status, or any other basis protected by applicable local, state, or federal laws or prohibited by Company policy. Belle also strives for a healthy and safe workplace and strictly prohibits harassment of any kind. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9. Powered by JazzHR IdgIn04XP3

Job Description Join Crown & Co. Salon A One-of-a-Kind Career Opportunity Are you a licensed stylist, barber, or nail technician ready to grow your career in a place that truly supports you? At Crown & Co. Salon, you’ll discover an environment designed for your success, personally and professionally. An Environment You’ll Love Crown & Co. isn’t just a salon; it’s an experience. Located inside one of the nicest automotive dealerships in the country, our space is built to inspire. Here, you’ll enjoy: • A positive, energetic, and supportive culture where team members are encouraged to grow and thrive, • A fun and motivating atmosphere that makes every day rewarding, • Owners who genuinely care about your development, offering the chance to refine your skills and elevate your craft, • The satisfaction of knowing you’ll leave each day feeling fulfilled by the work you do and the clients you serve Clients, Clients, Clients! Building a clientele has never been easier: • The dealership welcomes over 5,000 customers every month plus more than 300 employees on-site., • A steady flow of potential clients right at your fingertips, • Instead of struggling to find business, you’ll have the chance to grow your book of loyal clients quickly and confidently Why Choose Crown & Co.? • Brand-new, state-of-the-art salon with the latest tools and products, • On-site perks like a full-service restaurant and an employee fitness center with a personal trainer, • A commitment to world-class service and high-quality care for every client If you’re passionate about your craft, love connecting with people, and want to thrive in a fun, rewarding, and opportunity-rich environment, Crown & Co. is the perfect place to build your future. Apply or ask questions: Call or message us today!

Job Description At Beaver Toyota, we’re not just about selling cars—we’re about building relationships and providing world-class service. That’s why we’re the #1 dealer in customer retention and why we invest in our team’s success. We’re looking for Automotive Technicians who are passionate about their craft, eager to grow, and ready to work in an environment that values and supports them. If you're ready to take your career to the next level, we want you on our team! What We Offer • Competitive Pay & Incentives – Earn top-tier compensation, • $500 Vehicle Credit – Receive $500 toward a vehicle when you achieve Master Technician status, • Special Family Days Off – Enjoy a paid day off for your child’s or spouse’s birthday—because family comes first, • Fully equipped onsite gym with access to a personal trainer., • Onsite hair salon & nail salon for convenience and self-care., • Onsite restaurant offering delicious meal options., • 401(k) Retirement Plan, Health, Vision, and Life Insurance, Health Savings Account, Paid Time Off, • Perform vehicle maintenance, diagnostics, and repairs efficiently and accurately., • Ensure all work meets or exceeds manufacturer quality standards., • Collaborate with the service team to provide outstanding customer experience., • Experience as an Automotive Technician., • Strong diagnostic skills and a passion for the automotive industry., • Commitment to quality and customer satisfaction., • Ability to work effectively as part of a team., • A drive to grow and advance within the company., • Job Type: Full-time

Job DescriptionBenefits: • Employee discounts, • Competitive salary, • Bonus based on performance, • Flexible schedule Frenchies is your answer. We Offer Hourly pay for your entire shift, not just when performing services Keep 100% of your tips Employee referral bonus Paid training on manicures, pedicures, Gel Extensions, and more! Continuing education: Being part of the Frenchies system has its perks. Frenchies continuously provides deeper education so that you can continue growing personally and professionally! Employee discounts on services and retail products Company Culture Everything we do, from our music to our pay structure, creates a fun and supportive environment with a modern vibe where our employees create nail masterpieces. Work/life balance Company team-building events High-quality tools and products are provided to every nail technician Fun yet professional work environment Responsibilities Greets customers with a smile and friendly conversation while assisting them Provides exceptional manicures and pedicures Helps maintain our professional-grade cleaning standards Brings good vibes to studio staff and clientele Qualifications Must be a licensed Nail Technician or Cosmetologist Frenchies Modern Nail Care: Frenchies doesnt look, smell, or feel like a typical nail salon. Our studios are light, open, and airy (speaking of air, ours is especially freshno acrylics = no harsh chemical smells). Were super clean, inviting, and fun in that I-love-hanging-out-with-these people kind of way. Core Values Healthy: Provide a Healthy environment that contributes to the well-being and self-improvement of all. Smart: Commit to smart business practices that embrace growth, change, and evolution. Accountable: Deliver our very best in all we do and hold ourselves accountable for results. Fun: Promote a positive, ego free, and fun culture where teamwork and transparency thrive. At Frenchies, you'll love your work, and we'll love you right back.