Trabajos part time engineering en Fort Worth, Texas - Page 2Crear alertas

Job DescriptionDescription: Position Summary: Responsible for executing purchase orders for all serial production parts in accordance with MRP requirements, lead times, and master production schedule. Responsible for managing supplier delivery dates and adjusting for changes in the master production schedule or mitigation/expediting due to supplier delays or part nonconformity. Responsible for inventory management to assure part availability while maintaining minimal inventory levels. Essential Duties and Responsibilities include the following, other duties may be assigned: Procurement • Place POs for all parts assigned per MRP to support the master production schedule, • Verify all terms and conditions of the PO with supplier, • Manage system notifications and evaluate current delivery dates to determine if orders need to be expedited to support production schedules or delayed to prevent untimely inventory, • Manage open orders to ensure all needed parts are on order and communicate with suppliers on a regular basis to confirm their delivery schedule, • Maintain current pricing and lead times in the system of record, • Mitigate any delays that will impact production schedules by working with Sr. Buyers, Production Scheduling, Planning and Logistics, • Manage all inbound transportation from suppliers within area of responsibility, • Coordinate schedules with Logistics (receiving) and Quality (receiving inspections) for any deliveries that are outside of normal schedule, priority, or large volume and confirm adequate personnel will be available for processing, • Track each production order and monitor the parts in area of responsibility, • Identify any shortage and monitor, report, and expedite as required to avoid delays in production or adjustment of build schedules, • Manage inventory levels of parts in area of responsibility to ensure no additional, excess, or obsolete inventory is on hand and drive to just in time to eliminate inventory for production parts, • Monitor design changes to identify:, • Inventory that needs to be used up prior to effectivity and ensure it is used accordingly, • Inventory that can be reworked to next higher index and manage the process of getting disposition, planning, and PO for rework, • Obsolete inventory that cannot be used or reworked and must be scrapped, • Monitor all Quality Nonconformance notifications (Q notes) in area of responsibility, • Ensure parts are available to complete build, • Follow all office safety policies, • Ensure compliance with all RECARO policies, procedures, and work instructions, • Ensure compliance with any regulatory or governing body to include, but not limited to, AS9100, EN9100, ISO9001, ISO14001, FAA, EASA, Airbus, or Boeing Requirements: Education: • Associate’s degree in a related field plus 2 years of experience in procurement or a related field;, • Professional attitude, positive outlook, and excellent communication skills, • Frequent interactions with all levels of the organization including executive management; in addition there’s a considerable amount of interfacing with suppliers and customers, • Able to manage through influence, specifically with Engineering and Quality groups, • Capable of working in dynamic situations and take on tasks outside standard work scope., • Ability to effectively lead a small group, • Microsoft Word, Excel, PowerPoint, and Outlook required, • Familiarity with MRP systems/SAP experience preferred, • Familiarity with Teamcenter preferred

Job Description We’re Hiring: Engineering Director – Civil Land Development We are growing, and we’re looking for an Engineering Director to lead our team in Fort Worth, TX. As part of our leadership team, you’ll guide projects in land development, residential subdivisions, commercial sites, industrial warehouses, and more. What we’re looking for: 10+ years of civil engineering & land development experience Licensed Professional Engineer in Texas (PE) Proven leadership in managing teams and client relationships Entrepreneurial spirit with a drive for growth and innovation Expertise in Civil 3D, AutoCAD, and full plan set preparation Location: Fort Worth, TX (fully in-office) Employment: Full-time Ready to bring your vision, leadership, and expertise to a growing civil engineering firm? Apply today and help us build the future of Texas communities, and beyond. Please send resume to: #EngineeringJobs #EngineeringDirector #CivilEngineering #LandDevelopment #ProfessionalEngineer #TexasJobs #FortWorth #Leadership #CivilDesign #Hiring #westwood #bairdhamptonbrown #papedawson #tnp #wgi #aecom #garver #dannbury

Job Description ARDEX Americas () is a global leader in the manufacturing, development, and distribution of high-performance, sustainable building solutions. We're known for exceptional products, trusted expertise, and a strong presence in the tiling, flooring, and building sectors. Our team combines deep experience with fresh talent in a culture that values stability, growth, and innovation. This is your opportunity to join a respected industry leader—where your energy, insight, and drive are truly valued. We are immediately hiring a practical, mechanically inclined MANUFACTURING ENGINEER to support our Mansfield, Texas manufacturing facility. Working directly with production equipment, you'll be on the plant floor daily, troubleshooting issues, supporting maintenance, and ensuring machinery runs safely and efficiently, together with optimizing manufacturing processes, and leading plant-level engineering initiatives. Graduates who have completed relevant internships are also invited to apply. Key Responsibilities: • Provide technical support for daily plant operations, equipment reliability, and production processes., • Develop a comprehensive understanding of the manufacturing process—from raw material receipt through packaging of finished goods., • Lead and execute small-to mid-size capital and process improvement projects., • Support larger-scale engineering projects under the direction of the Plant Manager and/or Senior Corporate Engineering Manager., • Manage the plant's computerized maintenance management system and support its effective use., • Assist with environmental compliance, regulatory reporting, and sustainability initiatives., • Monitor plant waste streams and contribute to continuous improvement efforts aimed at waste reduction and operational efficiency., • Experience in a hands-on engineering or technical role within a manufacturing environment., • Strong mechanical and electrical aptitude; experience working with industrial equipment., • Proven troubleshooting and root-cause analysis skills., • Project management experience with the ability to manage multiple priorities., • Familiarity with Lean manufacturing principles, 5S, and continuous improvement methodologies., • Proficient in Microsoft Office applications (Word, Excel, Outlook)., • Strong communication skills, sound judgment, and a collaborative working style., • Exemplify our values daily: Fuel Passion, Drive Innovation, Embrace Responsibility, Embody Integrity, Build Belonging, • Ability to lift up to 55 pounds occasionally., • Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa currently. Education • Bachelor's degree in Engineering or a related technical discipline is preferred. Equivalent hands-on experience will also be considered Benefits: • Generous Paid Time Off (PTO) and 11 Paid Holidays, • Paid Parental Leave to support growing families, • 401(k) with Company Match to help you save for retirement, • Medical, Dental, and Vision Insurance (effective the 1st of the month after hire), • Company-paid Disability, Life, and AD&D Insurance and Travel Assistance, • Wellness Programs, including Telehealth and an Employee Assistance Program (EAP), • Tuition Assistance for Associate’s and Bachelor’s degrees, • Discounted Gym Memberships to support your fitness goals

Job DescriptionSalary: 120,000 POSITION SUMMARY The Branch Manager oversees all aspects of branch operations, including sales, service, staffing, customer satisfaction, and financial performance. This role is responsible for driving revenue growth, operational excellence, and ensuring the branch meets or exceeds profitability goals. The Branch Manager leads and develops teams to deliver superior industrial sales and service solutions to customers within the assigned region. ABOUT THE COMPANY 3C Industrial is a leading provider of industrial compressed air solutions across Texas. We specialize in delivering high-quality air compressors, air treatment products, and customized services that enhance operational efficiency for our clients. Our commitment to excellence is reflected in our distinguished customer service and reliable equipment offerings. With a team of dedicated professionals, we strive to create an efficient, dependable, and innovative future for our customers. KEY RESPONSIBILITIES Lead and manage branch personnel, including sales, service, operations, and administrative staff Recruit, train, and develop employees to build high-performing teams Set clear performance goals and conduct regular performance reviews Drive branch sales growth through direct involvement in key accounts and supporting sales representatives Develop and execute local sales strategies aligned with company objectives Build and maintain strong relationships with customers, suppliers, and partners Ensure efficient daily operations across sales, service, inventory, and administration Oversee branch financial performance, including budgeting, expense control, and profitability Monitor customer feedback and implement improvements to ensure positive customer experience Prepare regular reports on sales, service, operational performance, and financial results QUALIFICATIONS Bachelor's degree in Business, Engineering, or related field -Required Minimum 5 years of management experience in industrial sales and service or related industries- Required Strong leadership, communication, and organizational skills Proven ability to manage budgets, sales targets, and operational KPIs Knowledge of the Texas industrial market and customer base COMPENSATION PACKAGE Base Salary: $120,000 annually, depending on experience and branch size Annual Bonus Opportunity: Up to 20% of base salary tied to achievement of the branch sales and profit targets, customer satisfaction and retention goals, and operational efficiency metrics. Incentivized Key Performance Indicators (KPIs): Monthly Branch Sales: $ 400,000 Gross Profit Margin (%)- 45% Google Review- 8 - 5 Star Internal Feedback Score- 80% On-Time Service Delivery- Deal Stage Accuracy (%)- 95% Example: Monthly KPI Potential- $2,000 (20% Annual Salary / 12) 5 KPIs Achieved = Full Bonus. 4 KPIs Achieved = 80% or $1,600. Etc Benefits: Health, dental, life, and vision insurance, IRA retirement plan with company match, company vehicle or vehicle allowance, paid time off and holidays, and professional development and training programs PHYSICAL REQUIREMENTS Regularly required to stand, walk, and sit for extended periods, especially during meetings, presentations, and while operating a vehicle. Occasionally required to climb, balance, stoop, kneel, or crouch during site visits or equipment inspections. Ability to lift and carry items up to 25 pounds, such as promotional materials, product samples, or equipment COMMITMENT TO DIVERSITY As an equal opportunity employer committed to meeting the needs of a multigenerational and multicultural workforce, 3C Industrial recognizes that a diverse staff, reflective of our Community is an integral and welcome part of a successful and ethical business. We hire local talent at all levels regardless of race, color, religion, age, national origin, gender, gender identity, sexual orientation, or disability, and actively foster inclusion in all forms, both within our company and across interactions with clients, candidates, and partners.

Job Description The Production Engineer II is responsible for managing and optimizing both operated and non-operated gas wells. This role collaborates with multidisciplinary teams to enhance production efficiency, reduce operational risks, and maximize resource recovery. This role works to achieve operational targets under general supervision. Requires the ability to influence others by explaining facts, policies and practices. Problems faced may be difficult but generally not complex. Demonstrates integrity, accountability and transparency; upholds BKV standards, values and culture. RESPONSIBILITIES • Optimize artificial lift including plunger lift and rod pump wells., • Identify, plan, prioritize, execute, and perform lookbacks on projects., • Track and manage lease operating expenses., • Collaborate and communicate with asset team and JV partners., • Build analytical models., • Utilize production data to generate reports on production performance, trends, and issues. Present findings to cross functional teams., • Ensure compliance with safety regulations, environmental standards, and operational best practices., • Provide guidance and assistance to junior engineers, sharing expertise and contributing to their professional growth., • Stay up to date on existing and emerging technology., • Understanding of natural gas industry standards, market trends, emerging issues, and regulatory requirements., • Strong fundamental knowledge of production engineering and operations., • Working knowledge of geology and petrophysics., • Proficient in Microsoft Office and job-related applications. Uses insights from digital tools to improve performance., • Ability to thrive in a dynamic fast-paced environment., • Ability to work independently and as part of a team., • Advanced interpersonal, collaboration and communication skills., • Demonstrated attention to detail, organization and prioritization skills., • Demonstrated cognitive and problem-solving skills., • Bachelor’s degree in petroleum, chemical or mechanical engineering is required., • Position is located in the Barnett Field / Fort Worth Basin and is based out of the Fort Worth, Texas office., • Indoor working environment that requires the ability to perform repetitive motions and operate standard office equipment., • May occasionally be exposed to distracting noise level while sharing office space with others., • Hybrid of indoor & outdoor working environments, depending on assignment., • Requires ability to perform repetitive motions, operate standard office equipment, potentially stand for long periods of time, and engage in frequent pending, stopping, pushing, and lifting items more than 20lbs., • Some travel up to 20% may be required.

Job Description Join a specialized and highly regarded environmental team dedicated to helping our clients with challenging air quality projects! We are seeking an experienced Environmental Specialist with a strong background in air emissions testing, reporting, and permitting to join our remote team. The ideal candidate will have a minimum of 5 years of relevant experience, demonstrating expertise in air quality regulations, testing protocols, and environmental compliance. Key Responsibilities: • Oversee air emissions testing and sampling at various industrial sites., • Prepare and submit technically advanced air emission reports in compliance with Federal, state, and local regulations., • Develop and help manage air permits and ensure ongoing compliance., • Maintain up-to-date knowledge of state and Federal air quality regulations and industry best practices., • Assist in preparation of documents for other regulatory applications, such as hazardous waste applications, • Provide training and guidance on regulatory standards to operators at client facilities., • Support the design, permitting, and management of thermal treatment systems and other waste management or air pollution sources. Travel Requirements: This position requires travel to client sites up to 25% of the time. Travel may occur as back-to-back weeks or on an irregular schedule, depending on client needs. Applicants should be within general proximity of a major airport to facilitate travel. Vetting Requirements: Candidates must be willing to undergo a Federal background check and complete a pre‐employment and periodic random drug screens for all substances required under the Federal Drug-Free Workplace Program (DFWP). Applicants must be a U.S. citizen. Qualifications: • Bachelor’s degree in Environmental Science, Engineering or a related field., • Minimum of 5 years of experience in air emissions testing, reporting, and permitting. Consulting experience preferred but not required., • Knowledge of federal and state environmental regulations., • Experience executing, reviewing, and/or overseeing stack testing and laboratory analyses., • Strong analytical and problem-solving skills., • Must be extremely proficient at MS Excel, and capable of conducting basic editing and manipulation of documents in MS Word., • Strong technical and communication skills., • Ability to work independently and as part of a team.

Job Description Who We Are: Quest Global delivers world-class end-to-end engineering solutions by leveraging our deep industry knowledge and digital expertise. By bringing together technologies and industries, alongside the contributions of diverse individuals and their areas of expertise, we are able to solve problems better, faster. This multi-dimensional approach enables us to solve the most critical and large-scale challenges across the aerospace & defense, automotive, energy, hi-tech, healthcare, medical devices, rail and semiconductor industries. We are looking for humble geniuses, who believe that engineering has the potential to make the impossible possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognize that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then we’re eager to hear from you. The achievers and courageous challenge-crushers we seek, have the following characteristics and skills: What You Will Do: • Monitors queue and activates resources and corrective actions to address accordingly: Purchase Requisitions (PR), Change Orders (CO), catalog transactions, and vendor management queues against KPIs and SLAs., • Lead process and strategy improvements related to strategic sourcing, purchase-to-pay (P2P) services, procurement, contracts and category management., • Serve as a resource and key team member on client projects and help ensure timely delivery of results., • Has exposure to most critical suppliers, problem resolution, identifying root causes, supporting root cause analysis/corrective actions., • Bachelor’s degree in supply chain, business or other technical fields preferred., • 3-6 years of experience within supply chain management, commodity management, procurement, or a senior logistics role., • Proficient in Microsoft Office., • Experience with ERP Systems (preferably SAP). Compensation decisions are made based on factors including experience, skills, education, and other job-related factors, in accordance with our internal pay structure. We also offer a comprehensive benefits package, including health insurance, paid time off, and retirement plan. Work Requirements: This role is considered an on-site position located in Haltom City, TX. • You must be able to commute to and from the location with your own transportation arrangements to meet the required working hours. Citizenship requirement: Due to the nature of the work, U.S. citizenship is required. Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance, • Short/Long Term DisabilityCompany DescriptionWe are Quest Global. We’re in the business of engineering, but what we’re really building is a brighter future. It’s not just what we do, but why we do it that makes us different. We believe engineering has the unique opportunity to solve the problems of today that stand in the way of tomorrow. For 28 years, we have strived to be the most trusted partner for the world’s hardest engineering problems. As a global organization headquartered in Singapore, we live and work in 17 countries, with 56 global delivery centers, driven by 18,000+ extraordinary employees who make the impossible possible every day. Quest Global brings deep industry knowledge and digital expertise to deliver E2E global product engineering services. We bring together technologies and industries alongside the contributions of diverse individuals and their areas of expertise to solve problems better, faster. This multi-dimensional approach enables us to solve the most important and large-scale challenges across the Aerospace & Defense, AutoWe are Quest Global. We’re in the business of engineering, but what we’re really building is a brighter future. It’s not just what we do, but why we do it that makes us different. We believe engineering has the unique opportunity to solve the problems of today that stand in the way of tomorrow. For 28 years, we have strived to be the most trusted partner for the world’s hardest engineering problems. As a global organization headquartered in Singapore, we live and work in 17 countries, with 56 global delivery centers, driven by 18,000+ extraordinary employees who make the impossible possible every day. \r\n\r\nQuest Global brings deep industry knowledge and digital expertise to deliver E2E global product engineering services. We bring together technologies and industries alongside the contributions of diverse individuals and their areas of expertise to solve problems better, faster. This multi-dimensional approach enables us to solve the most important and large-scale challenges across the Aerospace & Defense, Auto

Job Description Fabrication Supervisor Job Summary: This position is responsible for the performance and oversight of high quality, safe, reliable, timely and cost-effective operation of the company’s fabrication department, consisting of the Machine Shop, Sheet Metal Shop, and Paint Shop in support of the company’s production schedule. Job Responsibilities: • Supervise day-to-day operations of the fabrication department., • Assign work orders to machinists, sheet metal workers, and painter and obtain fixtures, special tools, and materials required to complete the fabrication processes and track work order progress., • Coordinate with other department supervisors such as Production Assembly and Inventory Control to ensure parts are available when needed., • Track and analyze work order hours to detect and correct manufacturing deficiencies., • Track and present repair department performance metrics to senior management, as required., • Analyze engineering drawings, sketches, and design data of a part to determine dimension and configuration of cuts, select cutting tools, and establish machining speeds and feed rates., • Write CNC programs to manufacture parts as required by production work orders and approved Request to Production, focusing on minimizing manufacturing costs and optimizing quality., • Upload programs into production CNC machinery, load tooling, and perform set up operations as required by the program., • Operate CNC machines to manufacture parts as required by production work orders and approved Requests to Production., • Store and back up CNC programs in a centralized location., • Maintain a current revision log of CNC programs., • Coordinate with the maintenance department to schedule Preventative and Periodic Maintenance on CNC machines., • Analyze work orders and other applicable documents to determine materials needed, sequence of operations, and equipment required, and assign work to appropriate Machinists., • Train other Machinists in equipment operation and other tasks associated with machining parts., • Working from blueprints and standardized work instructions, perform machine operations on manual Machine Shop equipment such as lathes, milling machines, and grinders, to manufacture parts as required by production work orders and approved Requests to Production., • Devise, construct and maintain fixtures, tools, dies, gauges and equipment to facilitate manufacturing., • Provide technical assistance to the Engineering Department in relation to machining operations and departmental capabilities., • Provide estimates on machining time as required from management., • Education: High school graduate, 3 years technical school preferred; 1 year general machining, 1-year general metallurgic manufacturing, • Experience: Minimum 3 years of CNC programming and operation (GIBBS CAM preferred) and 3 years in general Machine Shop work., • Skills: Must possess strong work ethic and organizational skills. Ability to effectively prioritize and manage competing demands. Ability to provide leadership, supervise and adapt in a dynamic work environment. Intermediate knowledge of shop mathematics. Intermediate knowledge in general and aerospace machining best practice techniques and the ability to read blueprints and data sheets., • Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand, reach, grasp, lift and is subject to frequent repetitive motion and vibration. The employee is frequently required to use hands to finger, handle and feel. The employee is occasionally required to sit, walk and hear. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision and depth perception. The visual acuity to perform an activity such as: machine set up and usage; visual inspection of parts using precision measuring devices to verify the accuracy of the work performed., • Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The employee is frequently in an environmentally controlled shop environment. The employee is frequently subject to hazards. Includes working in very close proximity to moving mechanical parts. The noise level is quiet to moderate. We offer an excellent benefits package, including life insurance, comprehensive medical and dental plan, profit sharing and retirement plan, paid holidays, vacation and PTO. Salary will be commensurate with experience, education and ability. EEO/AA/F/M/Vet/Disabled

Job Description At Gatekeeper Systems, we’re revolutionizing retail loss prevention and customer safety through a powerful combination of physical deterrents and cutting-edge technology—including AI, computer vision, and facial recognition. As a global leader with over 25 years of industry excellence and a growing, diverse team of 500 employees across offices in North America, Europe, Australia, and Asia, we’re driven by innovation, integrity, and impact. Join us and be part of a mission-focused team that’s making a real difference in the future of retail, providing innovative solutions and services that redefine industry standards. POSITION SUMMARY: The Quality Control Technician is responsible for ensuring that all products meet established quality and safety standards before reaching customers. This role performs inspections, measurements, and documentation of product quality, supports root cause analysis and corrective actions, and collaborates with cross-functional teams to resolve issues. In addition, the Quality Control Technician assists in the Return Material Authorization (RMA) process for SmartWheel and other Gatekeeper products by evaluating returned units, performing quality assessments, and documenting findings to support corrective actions. This position plays a critical role in maintaining Gatekeeper Systems’ reputation for delivering reliable, high-quality solutions by applying technical skills, attention to detail, and adherence to quality procedures in a fast-paced manufacturing environment. WHAT WE OFFER… Join the team at Gatekeeper Systems and watch your career grow! We offer competitive compensation and benefits packages that include: • Attractive Total Compensation Package, including annual bonus, • Comprehensive healthcare benefits including medical, dental, and vision coverage; Life/ADD/LTD insurance; FSA/HSA options., • 401(k) Plan with Employer Match, • Generous Paid Time Off (PTO) policy, • Observance of 11 paid company holidays, • Various Employee Engagement Events, • Exciting Growth Opportunities, • Make a visual product inspection and record results to a spreadsheet, • Use a product-specific meter to take quality measurements and record the results, • Read, interpret, and follow technical engineering drawings, specifications, bills of materials, and other written instructions or procedures to perform final product configuration, • Upload data to the material management system for the account manager, • Assist with problem-solving – root cause analysis – corrective actions, • Maintain accurate documentation of quality inspection results, • Perform quality work checks to assure the product meets quality standards, • Assist and/or substitute in quality control station as needed, • Maintain inventory of products in the configuration area, • Perform all work in accordance with quality standards and established safety procedures, • Small assembly tasks using common tools, • Communicates effectively with others and can function and get along in a team environment The requirements listed below are representative of the knowledge, skill and/or ability required. • Intermediate computer navigation and utilization skills, • Must be able to use a digital multi-meter, • Basic reading skills. Must be able to follow directions, • Ability to use reasoning to solve a problem and to think in such a way as to produce a new concept or idea, • Great attention to detail and self-motivation skills, • Technical problem-solving skills, • Specific technical or vocational training or certification may be required; may be required to pass ruler test, • Ability to add, subtract, multiply and divide into all units of measure, using whole numbers, common fractions, and decimals., • High School Diploma or GED The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Repetitive motions and routine use of standard office equipment such as computers, telephones, copiers/scanners and filing cabinets., • Ability to see, speak, walk, hear, stand, use of hand/fingers to handle or feel; climb stairs, stoop, carry/lifting up to 5O lbs., • Ability to sit at a desk., • Specific vision abilities required include close vision, color vision, peripheral visions, depth perception and the ability to adjust focus. This Job Description is a general overview of the requirements for the position. It is not designed to contain, nor should it be interpreted as being all inclusive of every task which may be assigned or required. It is subject to change, in alignment with company/department needs and priorities. Gatekeeper Systems, Inc., is an equal opportunity employer. We are committed to developing a diverse workforce and cultivating an inclusive environment. We value diversity and believe that we are strengthened by the differences in our experiences, thinking, culture, and background. We strongly encourage applications from candidates who demonstrate that they can contribute to this goal. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status or any protected basis.

Job Description Job Description: Are you a reliable, enthusiastic, detail-oriented individual who can handle multiple projects at once? If so, we invite you to apply to join the Project Coordinator team at Oslin Nation! The right individual is self-motivated, learns quickly, and has a great attitude and demonstrates an eagerness to learn and grow. Successful candidates are mechanically inclined, well-organized, work well in a team setting, and perform efficiently with minimal supervision. Excellent communication and follow-up will be required attributes. This position is primarily responsible for supporting the sales staff and helping walk projects through to completion. This will include ongoing communication with sales reps, order entry and manipulation in the ERP system—primarily dealing with Sales and Purchase Orders. High levels of attention to detail are required as orders are complex and require high accuracy. This position reports to the sales manager and is an integral part of the sales team. Job Details: • Support contractor sales person by managing document flow, • Manage product delivery schedules, costs, and executed change orders, • Prepare submittals for customer and engineering approval, • Ensure all required material is ordered and delivered on time to the work site, • Follow up on project quotations, • Maintain required project documentation, • Coordinate with sales, engineering, and customer service staff as necessary, • Maintain high standards of workmanship that accurately reflect the original plans and specifications, • Monitor and track progress and changes, • Strong computer skills, including Microsoft Office Suite products and some ERP experience, • Excellent written and verbal communication skills - articulate and diplomatic manner, • Flexibility to work extended hours to complete projects and meet deadlines as needed, • Experience in the construction or related field helpful, • Detail Oriented, punctual and reliable Benefits: • Paid PTO Time—starts accruing immediately at hire, • 401k with generous company match (up to 5%), • 9 Paid Holidays, • Company-paid Life Insurance ($50,000 policy) In an effort to maintain a drug-free environment, offers will be contingent upon successfully passing a drug and/or background check. Oslin Nation is an equal opportunity employer. All employment decisions will be made without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other legally protected classification. Company DescriptionOslin Nation Co. actively pursues candidates who embody our "iCare" values: Integrity, Competence, Accountability, Respect, and Excellence. Individuals with these qualities succeed at Oslin Nation because they consistently provide value to our customers and ensure sustainable business growth. If this describes you, we invite you to join our team! We are a leading Manufacturer's Representative sales agency that sells commercial mechanical (hydronic) and plumbing products to contractors, wholesalers, institutional, industrial, and end users throughout the state of Texas and beyond. With offices in Arlington, Houston, San Antonio, and Austin, we provide market leading service throughout the region. In an effort to maintain a drug-free environment, offers will be contingent upon successfully passing a drug and/or background check. Oslin Nation is an equal opportunity employer. All employment decisions will be made without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other legally protected classification.Oslin Nation Co. actively pursues candidates who embody our "iCare" values: Integrity, Competence, Accountability, Respect, and Excellence. Individuals with these qualities succeed at Oslin Nation because they consistently provide value to our customers and ensure sustainable business growth. If this describes you, we invite you to join our team!\r\n\r\nWe are a leading Manufacturer's Representative sales agency that sells commercial mechanical (hydronic) and plumbing products to contractors, wholesalers, institutional, industrial, and end users throughout the state of Texas and beyond. With offices in Arlington, Houston, San Antonio, and Austin, we provide market leading service throughout the region.\r\n\r\nIn an effort to maintain a drug-free environment, offers will be contingent upon successfully passing a drug and/or background check. Oslin Nation is an equal opportunity employer. All employment decisions will be made without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other legally protected classification.

Weaver Consultants Group is looking for upcoming or recent Civil and/or Environmental Engineering graduates to join our flourishing Fort Worth, Texas office! Weaver Consultants Group prides itself on our people - a talented group of engineers, scientists, geologists, surveyors and administrative staff who are as dedicated to client service as they are to their professional or technical discipline. As an engineer with Weaver Consultants Group, you will be an integral part of a multidisciplined team with opportunities to substantively contribute to a broad variety of projects. We are seeking independent and highly self-motivated engineers to join our team! Core Responsibilities • Develop detailed computer models and/or grading plans using AutoCAD Civil 3D. This includes the ability to create, modify, and manipulate surfaces, create and modify 3D lines, feature lines, and COGO points, and develop cross sections and profiles., • Support multiple project managers in a wide variety of projects, including:, • Development of engineering construction plans and bid documents for grading, drainage systems, stormwater management systems, erosion and sediment control plans, cell construction, final cover construction, infrastructure construction, liner and leachate collection systems, landfill gas collection systems, and utility installation projects., • Demonstrate a positive work ethic, drive, and independence by contributing around 45 hours per week on average to meet project deadline and budget expectations., • Prepare permit applications, permit modifications, technical reports, and CQA reports for federal, state, and local agencies., • Analyze technical data and preparing technical reports., • Site development planning and airspace management., • Cost estimating for construction and life of site planning. Job Requirements • Bachelors or Masters in Civil and/or Environmental Engineering (ABET Accredited)., • EIT certification or have the ability to obtain certification within six months of employment., • Exposure to AutoCAD, Civil 3D, Excel, Word, • Ability to analyze and create detailed 3D CAD models., • Excellent verbal and written communication., • Positive attitude and an impressive work ethic., • Passion and demonstrative drive to achieve goals., • Clear sense of urgency and self-initiative to meet deadlines., • Ability to apply technical skills to meet project demands and solve problems for our clients., • Attention to details and ability to contribute to a positive work environment., • Ability to balance workloads and schedules for multiple projects concurrently., • Develop detailed designs in civil and environmental-related engineering fields., • Work well as an independent but accountable team member., • Ability to excel and adapt in a fast-paced, client service-driven environment. Benefits • Consistent, Annual Bonus Program, • Paid Time Off (PTO)/Holidays, • 401(k) Program and Company Match, • Continuing Education Expenses Reimbursement, • Health, Dental, Vision, and Life Insurance, • Mentorship Program, • Growth Opportunities in Technical, Leadership, and Management fields, • Engaged and Supportive Office Culture If you are a motivated and committed individual, please apply to join our growing team! EOE/AA/M/F/Vet/Disability

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Injection Molding Process Technician - 1st/2nd/3rd Shift for our client in the Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Permanent position, and the client is looking for someone to start immediately. Duration: Full-time Location: Worth, TX Salary: $60,000-$65,000/Annually Role: Injection Molding Process Technician - 1st/2nd/3rd Shift Primary Skills: Engineering Role Description: The Injection Molding Process Technician must have 2+ years of experience. As an Injection Molding Process Technician, you will perform manufacturing support activities for a specific product or group of products. Responsibilities: • Follow procedures and protocols for addressing press alarms, production priorities, and test runs., • Complete production test runs including summarizing the results, completing the workstream in our MRP system, and communicating with all stakeholders., • Ability to transfer processes from one machine to another, also validating the process on the new machine; requires the creation of a new setup sheet and appropriate storage and filing of those documents., • Collaborate with process, tooling, quality, maintenance, and production to identify and solve problems., • Document all process changes on the “process change log worksheet”., • Follow standardized communication processes and expectations. Requires verbal, written, and formal communications to peers, operations, and vendors., • Work from a predetermined priority schedule subject to change to start or stop a molding machine including a complete shutdown to prepare the press for mold changes., • Provide support to molding and the quality team on all corrective actions., • Support the molding floor to ensure molds are running at an established process within the defined parameters., • Keeping a clean work environment including the molding floor., • Setup and improvement of part containment at the molding machine., • Work collaboratively with the molding department to implement and maintain a clean/safe molding floor., • Camera setup and installation as requested by Operations and Engineering., • Setup and tuning of Sprue Pickers and Robots. Yushin Sprue Pickers and Robots., • All other duties as assigned. Requirements: What we'd like you to have: • 2+ years of experience as a Process Technician in an injection molding environment. This position requires continued education; specifically, the American Injection Molding Institute (AIM) molding I and II. Company to pay for course work and travel. Education: High School/Bachelor’s degree in Computer Science, Electrical/Electronic Engineering, Information Technology or another related field or Equivalent Experience: Minimum 2+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Devyanshu Pawar Recruiter Phone: 412-490-7931 Benefits: This is a direct hire position, and the hired applicant will receive our client’s benefits package. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description About the Role Snelling Staffing is recruiting an experienced Electrical Preconstruction Manager on behalf of our client in Dallas/Fort Worth, TX. This individual will lead preconstruction efforts, foster strong client relationships, and deliver accurate cost estimates for large-scale commercial and healthcare projects. Key Responsibilities * Support the Business Development Team with proposals, interviews, and presentations * Prepare cost estimates during design development and preconstruction phases * Build and maintain relationships with General Contractors, Architects, and Engineering Firms * Participate in value engineering, scheduling, and constructability reviews * Identify new project opportunities and assist with business development initiatives * Monitor cost trends, evaluate subcontractor proposals, and provide input on staffing and scheduling Qualifications * Bachelor’s degree in Construction Management, Engineering, or related field (preferred) * 6+ years of experience in electrical estimating with an electrical contractor * Proven success estimating large commercial and healthcare projects ($5M–$10M+ budgets) * Experience with Accubid and/or Conest required; knowledge of AutoCAD/Revit preferred * Strong and stable employment history Company DescriptionAt Snelling Staffing of Milwaukee, we connect exceptional talent with outstanding employers across a variety of industries. Our team takes pride in building strong relationships with both clients and candidates to ensure successful long-term placements. We are looking for a part-time Staffing Specialist to join our high-energy, results-driven team. Our team is committed to supporting job seekers with fast onboarding, weekly pay, and long-term growth opportunities. We take care of the paperwork so you can focus on what matters most: your success on the job. Whether you're looking for a flexible schedule or your next big career move, Snelling is here to help.At Snelling Staffing of Milwaukee, we connect exceptional talent with outstanding employers across a variety of industries. Our team takes pride in building strong relationships with both clients and candidates to ensure successful long-term placements. We are looking for a part-time Staffing Specialist to join our high-energy, results-driven team.\r\n\r\nOur team is committed to supporting job seekers with fast onboarding, weekly pay, and long-term growth opportunities. We take care of the paperwork so you can focus on what matters most: your success on the job. Whether you're looking for a flexible schedule or your next big career move, Snelling is here to help.

Job DescriptionDuties • Plans and conducts work that involves using judgment to independently evaluate, select, adapt and modify standard techniques, procedures and criteria., • Independently performs most assignments with the instructions of the general results expected., • Complete understanding of Plan Production/Project Work Flow., • Plans, schedules, conducts and/or coordinates detailed phases of the professional work in a part of a major project or in a total project of moderate scope., • Acute awareness of schedules, deadlines and manhours required to complete projects and tasks., • Responsible for training interns and EIT’s., • Expected to delegate tasks and review the work of othersSkills & Qualifications, • Applicant must have a Bachelor of Science degree in Civil Engineering from an ABET accredited college or university., • 4+ years’ experience as a Licensed Professional Engineer in the State of Texas., • Effectively communicate with supervisors, peers, subordinates, clients, other consultants, municipalities, etc., • Self-motivated and deadline-sensitive with a can-do attitude. Strong time-management skills., • Proficient with AutoCAD Civil3D., • Advanced knowledge of Microsoft Office Suite., • Technical (design) knowledge., • Understanding of project schedules and budgets., • Responsible charge of signing and sealing projects

Job Description As a Civil Project Manager at Gessner Engineering, you will perform and oversee engineering design and manage clients and a team of engineers on a variety of projects. Duties & Responsibilities • Coordinating project needs internally and externally, • Time and Budget/ Resource Management, • Perform/oversee and guide team in the design and analysis for a variety of projects including residential, commercial, higher education, and public infrastructure., • Prepare/ oversee production of construction documents, specifications, cost estimates, and other engineering documents and reports., • Perform site visits to collect forensics and as-built data and conduct construction administration duties., • Collaborate in a team setting with department members and other design disciplines such as geotechnical, structural, construction materials testing and external sub-consultants and clients, as necessary, for project coordination., • Holds a team of EITs and PEs accountable for quality and timeliness of deliverables, • Assigns projects to Design Leads or Project Engineers, • Reviews timesheets and expenses of direct reports, • Develops leadership of direct reports, • Performs QA/QC of designs and documents congruent with experience, • Reviews and seals projects congruent with their experience level, • Generates proposals, • Generates invoicing, • Education/Licensure, • Bachelor of Science or Master's degree in Civil Engineering, • Preferred - Professional Engineer (PE) Licensed in Texas, • Experience, • 5-10 years of engineering experience with experience as a project manager, • Experience in all aspects of Civil engineering, including: knowledge of site development, land development, municipal infrastructure, erosion control, storm sewer, sanitary sewer, domestic water and grading designs, • Skills, • Be solutions minded. Always find a way to be part of the solution, • Be collaborative. Must have a positive attitude, work well with co-workers and clients, • Take initiative. Seek out every opportunity to do and to learn Disclaimer: Recruitment Fraud – Any communication regarding job opportunities from our organization will be initiated through official channels only, including our company email domain, @gessnereng.com, and verified HRIS domain @adp.com. We advise candidates to exercise caution and refrain from sharing personal or sensitive information with any party claiming to represent our company outside of these channels. We do not at any early stage of recruitment process solicit personal information (e.g., passport and bank account info), financial details, or any form of payment (e.g., application fee). If you receive suspicious communications, encounter job postings that appear fraudulent, or want to confirm any employment postings, please call 979-680-8840.

Job Description Paragon is seeking a technically proficient and detail-oriented Inside Sales Engineer to join our team. In this role, you will review and respond to client Requests for Quote (RFQs), develop accurate and timely proposals, and ensure alignment with all technical and quality requirements. You’ll work closely with Engineering, Quality, and Production teams, as well as clients and vendors, to ensure each proposal is tailored, compliant, and competitive. This position offers the opportunity to work on diverse, highly regulated scopes within the nuclear industry, requiring strong technical judgment, clear communication, and the ability to manage multiple priorities in a fast-paced environment. Responsibilities: • Analyze client RFQs to determine technical, quality, and commercial requirements., • Research product data, past performance, and other inputs to develop effective solutions that meet client needs., • Work with vendors to obtain pricing and lead time information for materials and services, ensuring all applicable requirements are flowed down., • Coordinate with internal departments to validate feasibility, scope, and execution strategy., • Develop budgets and schedules for proposed scopes of work., • Prepare and submit high-quality proposals in accordance with internal processes and client deadlines., • Maintain organized records of quote data and communications., • Review all quote documentation for clarity and accuracy prior to submittal., • Communicate directly with clients to clarify scope, align on expectations, and provide timely updates., • Support Outside Sales in proposal strategy and client interface., • Develop pricing for scope changes that arise during project execution., • Bachelor’s degree in Engineering or a related technical field., • 3–5 years of experience in technical sales, application engineering, or other engineering roles., • Strong written communication skills, with the ability to produce clean, professional, and technically sound proposal documentation., • Ability to interpret and respond to technical specifications, flow down those requirements to vendors, and track responses effectively., • Strong attention to detail and organizational skills., • Ability to manage competing priorities and work independently., • Experience in the nuclear industry., • Familiarity with nuclear industry regulations and quality standards (10 CFR 50 Appendix B, 10 CFR Part 21, ASME NQA-1, ASME Section III, etc.), • Familiarity with Commercial Grade Dedication and Qualification for nuclear applications., • Knowledge of export compliance procedures and awareness of data security requirements for government clients., • Experience working with DOD, DOE, or government clients., • Experience working with international clients. At Paragon, our mission is to lower the carbon footprint through innovative nuclear programs that are safe, sustainable, and economical. We support critical energy and national security applications through excellence in engineering, responsiveness, and integrity. Our team operates with a shared set of values, we stay persistent in solving challenges, collaborate with purpose, and approach every project with technical passion and professionalism. Ready to become a Paragonian? If you're looking for a technically challenging role with purpose, professional growth, and the opportunity to support national security and energy reliability, we’d love to hear from you. Paragon is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status.

Org Marketing Statement At Parker Aerospace, we develop technologies and innovative solutions that enable reliable, efficient and increasingly sustainable flight for the lifecycle of the aircraft, including aftermarket support. Our passionate people with deep engineering expertise, together with our breadth of differentiated technologies, ensure that we make the extraordinary happen and continue to shape the future of aviation in partnership with our customers. As a member of our team, you are instrumental in fulfilling our mission: 'Enabling Engineering Breakthroughs that Lead to a Better Tomorrow.' Pursuing a career at Parker presents unlimited opportunities for both professional and personal development. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges. At Parker, our team members belong, matter and make a difference. Job Posting Position Summary: With minimum guidance in a team environment, performs dimensional or mechanical inspection on a diversified line of Aerospace components. Inspect sub-assemblies, and assemblies along with performing the complex first article inspection to verify conformance to blueprints and engineering specifications. Responsible for ensuring compliance to customer and Company quality system specifications and requirements. Primary Responsibilities/Essential Functions: \n • Performs quality review of documents including, purchase orders, routers, certifications, specifications, blueprints, and other related documents.\n, • Conducts final dimensional or mechanical inspection of parts, components, sub- assemblies, and assemblies, for conformance to blueprints and engineering specifications.\n, • Determines if products and/or components will be accepted or rejected based on customer specifications.\n, • Uses a variety of precision measuring instruments such as micrometers, vernier calipers, comparators, and gauging equipment to verify conformance to requirements.\n, • Assists certified operator with devising dimensional gauging set-ups and performs part layout inspection (stanchion set-up and fixtures). \n, • Reviews, processes and completes any required quality documentation (i.e. certification, packing slips, etc.) prior to releasing product from DSQR.\n\n 8. Performs and processes the more complex first article inspection on components, sub-assemblies and assemblies to AS 9102 requirements per the customer requirements. • Reviews first article packages on file for completion and assures current revisions are on file.\n • Reviews new or revised customer specifications for updates to maintain current on customer requirements.\n, • Advises manufacturing personnel of possible non-conformities.\n, • Verifies proper labels, identification and packaging of parts at shipping, if required by customer.\n, • Complete any documentation at shipping, if required by customer.\n, • When customer certified as such, acts as customer's agent on all product quality and quality systems issues.\n\n Secondary Responsibilities/Non-Essential Functions: \n • Maintains appropriate knowledge and ability levels to efficiently perform all assigned work and utilizes this knowledge base to become proficient on new/unfamiliar assignments\n, • Observes all company policies and procedures, including safety rules, and maintains a clean and foreign object damage (FOD) free work area. Maintains a satisfactory high level of performance and high ethical/quality standards in all assigned work and related documents\n, • Actively participates in lean/continuous initiatives by identifying and providing suggestions on areas for improvement. Applies lean concepts and tools in work areas.\n, • May be required to train other inspectors and certified operators. Provides assistance or guidance to others related to customer specifications. \n, • May be required to process audit of test and assembly processes and interface with various customer and government representatives.\n\n Note: This job description is not intended to be all-inclusive. Employee may perform other related duties as required to meet the ongoing needs of the organization Qualifications (relevant experience, education and training): \n • Requires high school diploma or equivalent and 6 years related quality inspection experience.\n, • Must have experience using precision instrument measuring devices such as calipers, micrometers, feeler gauges, etc. \n, • Must be able to pass required vision exam and color vision test.\n, • Able to implement and effectively apply lean/continuous improvement initiatives.\n, • Able to effectively demonstrate team member competencies and participate in goal setting, performance feedback, and self-development activities.\n, • Must be able to work within precise limits or standards of accuracy.\n, • Has knowledge of commonly used concepts, practices, and procedures within the field.\n, • Able to interpret reports and use job specific software applications. Able to use employee self-service systems to access on-line information and use specialized automated systems (i.e. Microsoft, TORS, CICS, email)\n, • The person in this position frequently communicates with co-workers, supervisors, managers and customers about work product and processes and must be able to exchange accurate information in these situations. Must be able to read and understand written instructions and procedures. Demonstrates effective interpersonal communication skills as well as the ability to work in a team environment.\n, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Possess working knowledge of shop mathematics.\n, • Knowledge of applicable military standards or specifications required.\n, • Proficient in reading and interpreting engineering blueprints, customer's specifications and internal drawings and procedures.\n\n Typical Mental and Physical Demands: While performing the duties of this job, the team member is frequently required to move about inside the plant to access tools, parts and materials. The team member must be able to remain in a stationary position about half the time. The team member is required to use test equipment to inspect parts. Must be able to detect and identify parts and tools and inspect work for defects and accuracy. Also expected of the team member is regular attendance, the ability to work cooperatively and professionally with others. May be required to move parts or equipment weighing up to 50 pounds for a distance of 30 feet. We offer a comprehensive and competitive total compensation package. Come join the Parker Aerospace Team! We are proud to offer competitive benefits designed with health, wealth and well-being in mind. Our competitive package includes: Benefit & Retirement Plans Parker offers competitive benefit programs, including: \n • Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. \n, • Supplemental benefit programs including identity protection, legal protection, and pet wellness are available at competitive rates.\n, • 401(k) Plan with company matching contributions at 100% of the first 5% of pay\n, • Company provided defined-contribution retirement plan with annual contribution equal to 3% of pay\n, • Career development and tuition reimbursement\n, • Other benefits including paid parental leave, short and long-term disability programs, adoption assistance, a Care.com membership and financial planning assistance are provided at no cost to you.\n ***Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. U.S. Citizenship is required for most positions. ***Minority/Female/Disability/Veteran/VEVRAA Federal Contractor If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to and (06/20/2006) (C/O July 2015). ***This position is subject to meeting U.S. export compliance and/or U.S Government contracting citizenship eligibility requirements.

Job ID: 703518BR Date posted: Sep. 03, 2025 Description: You will be the L.O. Quality Assurance Analyst, Stf for the Quality Engineering Team which is responsible for ensuring compliance with company and regulatory standards. What You Will Be Doing As the L.O. Quality Assurance Analyst, Stf, you will be responsible for supporting the Quality Engineering Team through the development and maintenance of quality control measures and analysis of quality-related data. Your responsibilities will include: \n • Developing and maintaining CART, CAB, and Senior CAB charts.\n, • Coordinating cross-functionally with senior leadership in running Corrective Action meetings.\n, • Ensuring conformance to company and regulatory standards.\n, • Initiating, reviewing, analyzing, and reporting on quality-related data/metrics.\n We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options. Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus - if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. Who You Are The ideal candidate for this role is a collaborative and detail-oriented individual with experience in quality assurance and analysis. You should have excellent communication skills and the ability to work effectively with senior leadership and cross-functional teams. This role stands out as an opportunity to make a significant impact on the company's quality standards and processes, and we are looking for a candidate who is passionate about driving continuous improvement. Further Information About This Opportunity MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access. The selected candidate must possess an active Secret clearance to start. Basic Qualifications: • Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, • Proficient with MS Office (Word, Excel, PowerPoint), • Ability to obtain Secret clearance, • Quality Process and Continuous Improvement knowledge, • Experience with data visualization tool(s) (i.e., Tableau, Business Objects, PowerBI, etc.), • Demonstrated data analytics experience, • 2+ years of aviation quality experience, • Experience in project management and use of project management tools, • Effective communication skills, • Excellent organizational skills, • Experience interfacing with Government Customer Representatives, • Ability to adapt business processes into automated tools and perform specialized data investigations to support Root-Cause Corrective-Action (RCCA) efforts, • Experience briefing senior leaders With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: AERONAUTICS COMPANY Relocation Available: Possible Career Area: QA/Test and Inspection Type: Full-Time Shift: First

Job DescriptionDescription: Job Title: Lead Field Service Technician-Critical Facilities Company Overview: Sentinel Power Services (SPS), a TechPro Power Group company, based in Tulsa, OK, has been delivering industry-leading service solutions for over 25 years that empower its customers to safely start up and optimize the performance of their facilities’ electrical and power systems. SPS provides electrical testing, engineering, and start-up and commissioning services to the Data Center Infrastructure, Power Generation, Oil & Gas/ Petrochemical, Heavy Process, and other Industrial end markets. We are a dynamic and rapidly growing company in search of a highly skilled Lead/ Senior Field Service Technician to join our team to support a wide range of Data Center projects throughout the United States. Key Responsibilities: • Performing the necessary Acceptance Testing for electrical equipment within Data center Facilities., • Safely use hand and power tools, metering & testing equipment, and precision instruments., • Collaborate with internal team members & customers/ end-users to complete projects within defined timelines., • Follow safety protocols and adhere to all relevant regulations and guidelines., • Expertise in switchgear maintenance, troubleshooting, and breaker installation., • Strong electrical aptitude, understanding of power systems and problem-solving skills., • Thorough understanding of LDL, L2, L3 inspections and testing procedures., • Proficiency in secondary injection testing of breakers and PT/CT wiring installations., • Familiarity with bus installations, meter configurations, and control wiring., • Ability to read and interpret electrical drawings and schematics., • Hands-on experience with testing and maintenance tools (multimeters, megohmmeters, etc)., • Strong communication skills for interacting with customers and providing technical support., • Ability to troubleshoot complex electrical issues and provide timely resolutions., • Ability to work independently and as part of a team., • Experience with daily reporting and documentation of work performed., • Willingness to travel to various project sites within the U.S., • Minimum 3-5+ years of experience in switchgear installation, testing, and maintenance, preferably in industrial, utility, and/ or data center environments. Project(s): Multiple Data Center Sites Location(s): Virginia & Ohio Schedule: Full-time Monday – Friday Pay-rate: Based Upon level of Expertise. Overtime: Yes, potential for overtime varies Per Diem Included: Yes Start Date: Immediate (February 2025) BENEFITS: • PTO + Paid Holidays, • 401(k), • Dental insurance, • Health insurance This job involves both indoor and outdoor work. While performing the duties of this job, the employee is regularly required to: • Lift, carry and/or move up to 75 pounds repeatedly., • Climb ladders, staircases, step stools, stand, walk, sit, and operate vehicles for extended periods., • Work outdoors in varying weather conditions including intense heat/cold, muddy, and wet environments., • Perform precision tasks with instruments and fittings. TechPro Power Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. We celebrate diversity and are committed to creating an inclusive environment for all employees. This job description outlines the primary responsibilities and qualifications for the position, highlighting the collaborative and essential skills necessary for success. While we aim to provide an accurate depiction of the role, actual duties may vary based on organizational needs and evolving business requirements. These statements describe the general nature and level of work performed and are not an exhaustive list of all responsibilities, duties, and skills required.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: This actively engaged individual, as part of the quality department, will be responsible for the assignment and delegation of daily job duties and responsibilities of the quality support team. Control escalation to ensure that the needs of production/operations are not delayed. This position is responsible for delegation of job duties and assignments of the quality staff. This is considered a working role. This position reports to the Quality & Production Engineering Manager. This role is onsite and is based in Fort Worth, TX. Primary Job Duties and Responsibilities \n • Schedule and delegate job duties and assignments to team members to ensure all facets of operations has sufficient coverage.\n, • Support production and operations staff to ensure all quality related issues are assessed and use escalated as needed.\n, • Performs visual, dimensional and functional inspections of assemblies and components.\n, • Verifies dimensions against ASME production drawings and specification.\n, • Observes air and hydrostatic test.\n, • Compares test reports to specifications.\n, • Prepares and files associated inspection records.\n, • Assists in investigation of process related quality issues.\n, • Initiates non-conforming material reports and hold tags.\n, • Organizes work area for efficient workflow.\n, • Attends safety, departmental and company meetings.\n, • Performs other duties as required\n, • Assume responsibility for other projects and duties as assigned by the direct manager for the department.\n, • Exercise diligence in regard to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n, • Travel Requirements: up to 15%\n\n Required Qualifications \n • High School education or equivalent with technical training preferred.\n, • Five years' experience in a manufacturing environment i.e.: welding, metal fabrication, or assembly.\n, • One year of team leader experience\n, • Understanding of and adherence to applicable laws, codes, policies, regulations, and safety practices and procedures, as applicable.\n, • Must successfully establish employment eligibility and satisfactorily complete background checks, and required pre-employment testing as a condition of employment.\n\n Preferred Qualifications \n • ASME fabrication & inspection experience\n, • ASQ Certification\n, • APICS Certification\n, • Six Sigma Green Belt Certification\n, • Microsoft Office Certification\n\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth TX location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 30 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, and safety glasses.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. #LI Onsite Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Requisition Number: 66085 The company built on breakthroughs. Join us. Corning is one of the world's leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what's possible. How do we do this? With our people. They break through limitations and expectations - not once in a career, but every day. They help move our company, and the world, forward. At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more. Come break through with us. Our Optical Communications segment has recently evolved from being a manufacturer of optical fiber and cable, hardware and equipment to being a comprehensive provider of industry-leading optical solutions across the broader communications industry.This segment is classified into two main product groupings - carrier network and enterprise network. The carrier network product group consists primarily of products and solutions for optical-based communications infrastructure for services such as video, data and voice communications. The enterprise network product group consists primarily of optical-based communication networks sold to businesses, governments and individuals for their own use. Role Purpose "Rebuild tooling capability in Keller to support testing, tuning, and final production readiness of injection molds." Key Responsibilities • Repair injection molds by building new and repairing tool components., • Support tool shop operations through close tolerance CNC Mill machining operations., • Use of Mastercam to program CNC Milling Machines, • Perform Preventative Maintenance on injection molds., • Diagnose tooling issues and suggest solutions to Tool Shop Leader or Supervisor, • Reduce set up time and machining time through process improvements., • Inspection of tight tolerance mold steel components, • Improve efficiency, reduce costs, 5S, visual factory and support departmental objectives., • Independently program, setup, operate and troubleshoot CNC Milling Machines, • Diagnose tool issues and implement solutions., • Perform benchwork such as checking clearances, fits and shutoff surfaces on mold components., • Maintains a safe work environment by adhering to safety procedures and regulations., • Plan machining activities by reviewing work orders, drawing specifications, and materials., • Documents and communicates actions, issues, and continuing needs.\n\n Experiences/Education - Required • Minimum High School/General Education Diploma or equivalent work experience, • 5+ years of experience with Mastercam (Version X9 and up), • 5+ years in tool shop experience (CNC Mills, Surface Grinding, Bench Work), • 3+ years knowledge of injection mold tooling through mold building, repair, and design, • Experience with Microsoft office software (word, excel), • Mechanical Aptitude, strong attention to detail, • Understanding of common tool shop metals, cutters, hardness, • Good communication and multitasking skills with ability to work independently, • Hours of work/work schedule/flextime: Mon - Fri 8am-4pm (OT required as needed), some flex time allowed.\n\n Experiences/Education - Desired • 2 year associate degree in Tooling Technology or Equivalent, • Advanced trades mathematics., • SolidWorks or Creo experience / training, • Generate tool component drawings via. reverse engineering, • Knowledge of tool and component handling platforms such as Erowa or 3R, • Experience understanding and troubleshooting common defects of injection molds. The range for this position is $65,654.00 - $90,275.00 assuming full time status. Starting pay for the successful applicant is dependent on a variety of job-related factors, including but not limited to geographic location, market demands, experience, training, and education. The benefits available for this position are dependent on hours worked and may include medical, dental, vision, 401(k) plan, pension plan, life insurance coverage, disability benefits, and PTO. A job that shapes a life. Corning offers you the total package. Your well-being is our priority. Our compensation and benefits package supports your health and wellness, financial, and career from day one • As part of our commitment to your financial well-being, we provide a 100% company-paid pension benefit that grows throughout your career. We also offer a 401(k) savings plan with company matching contributions., • Our health and well-being benefits include medical, dental, vision, paid parental leave, family building support, fitness, company-paid life insurance, disability, and disease management programs., • Company-wide bonuses and long-term incentives, align with key business results and ensure you are rewarded when the company performs well - when Corning wins, we all win., • Getting paid for our work is important but feeling appreciated and recognized for those contributions motivates us much more. That's why Corning offers a peer-to-peer recognition program to celebrate success by recognizing colleagues who demonstrate above-and-beyond behaviors. \n\n We prohibit discrimination on the basis of race, color, gender, age, religion, national origin, sexual orientation, gender identity or expression, disability, veteran status or any other legally protected status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. To request an accommodation, please contact us at [email protected].

Job ID: 703483BR Date posted: Sep. 03, 2025 Description:What You Will Be Doing We are seeking a Manufacturing Engineering Capability Developer to join our Production Engineering (PE) Central Services team. The successful candidate will play a critical role in developing and deploying capabilities within our Product Lifecycle Management (PLM) systems, with a focus on PE responsibilities. This role is essential to supporting the company's Digital Transformation and 1LMX initiative, and will ensure that our PLM systems align with current and future program needs. Key responsibilities include: -Develop PE capabilities in the 3DX and Teamcenter PLM systems, aligning software functionality with current and future program needs. • Create job guides, training materials, and document processes specific to PE within the 3DX and Teamcenter ecosystem. -Test developed capabilities in the PLMS and across the Integrated Operational Framework (IOF) into the Manufacturing Execution System (MES) and Enterprise Resource Planning (ERP) systems. -Collaborate with cross-functional teams to ensure seamless integration of PLM capabilities with other business systems. What's In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. Further Information About This Opportunity Fort Worth, TX This position is in Fort Worth, TX Discover Fort Worth. Basic Qualifications: -Proficiency in 3DX and Teamcenter PLM systems, or similar PLM platforms. -Ability to obtain and maintain Secret clearance per business requirements. Interim clearance required to start. Desired Skills: -Experience in Production Engineering environment -Excellent analytical, problem-solving, and communication skills. -Ability to work effectively in a team environment and build strong relationships with stakeholders. -Experience with Digital Transformation and 1LMX initiatives. -Knowledge of MES and ERP systems and their integration with PLM systems. -Experience working in a dynamic environment with multiple priorities and deadlines. -Secret Clearance. Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 4x10 hour day, 3 days off per week Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: AERONAUTICS COMPANY Relocation Available: Possible Career Area: Manufacturing Type: Full-Time Shift: First

Job Description Job Summary Company NextGen Security, LLC Location Dallas, TX Industries Security and Surveillance Job Type Full Time Employee Years of Experience 5+ years of service experience in security industry or technical background. Career Level Experienced (Non-Manager) Exemption Non-exempt Senior Service Technician About the Job What we’re looking for: We are seeking an experienced electronic security service technician to join our fast growing and dynamic team. What you’ll be doing: This position will have multiple roles ranging from: project oversight in the field, system programming, project activation and commissioning, installation of field devices, and most importantly, servicing of high-end integrated security devices. Some travel may be required, along with after hours service calls. What you bring to the table:  Minimum of 5 years of experience with installing and maintaining: • Enterprise-level access control systems., • Intrusion detection systems (IDS), both fiber and copper based.  Superior problem solving and communication skills.  Work independently with minimal supervision.  Familiarization with local electronic security codes and industry standards. Understanding and ability to work safely in a chemical plant environment. Ability to safely operate a company vehicle. Preferred but Not Required  Access Control System Vendor Certifications in Software House, Genetec, ProWatch and/or Lenel.  Video Management System Vendor Certifications in Genetec, OnSSI, MaxPro, and/or Milestone.  Intrusion Detection System Vendor Certifications in Senstar/Optellios, and/or FFT.  Networking and IT knowledge.  TWIC Cardholder.  Experience in computer operating systems, network design and implementation. What we bring to the table:  Compensation based upon background and experience.  Company vehicle.  Full benefits package.  Vacation.  Cell phone Allowance. We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: Welder B - GMAW/GTAW Responsible for building components used in the manufacturing process. Performs complex tasks related to welding fabrication. Fit up, tack weld and final weld out of ASME pressure tanks. This position is responsible for ensuring that all welding is completed with the qualified Weld Procedure Specification (WPS). To ensure that product is built to required code specifications and approved Engineering drawing. This position reports to the Lead man of the designated area. This role is based at our Fort Worth, Texas location and may be placed on our 1st or 2nd shift. This position will be on the manufacturing floor and will be responsible for utilizing the Kiosks located throughout the shop. Primary Job Duties and Responsibilities \n • Pulls parts listed on the bill of material (BOM) and checks against blueprints and work orders.\n, • Follows rules that are required by ASME Section 1, Section IV, HLW, and Section VIII Division 1.\n, • Builds parts according to working instructions and engineered production drawings.\n, • Performs duplex stainless steel and carbon steel welding.\n, • Checks all tools and performs preventive maintenance.\n, • Changes out consumables and assists with the maintenance of tools.\n, • Check overhead cranes to ensure they are functioning properly. Complete daily crane safety logs.\n, • Utilizes crane and/or forklift for material handling.\n, • Assists with the inspection of parts and inventory reviews.\n, • Attend regular safety meetings and training.\n, • Gathers, cleans, and inspects safety gear.\n, • Organizes and cleans work area daily.\n, • Provides guidance and answers questions for colleagues with less experience.\n, • Assume responsibility for other projects and duties as assigned by Supervisors and/or managers and other applicable Company management teams.\n, • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n, • Travel Requirements: Less than 5% of travel. Examples of travel: Inner company training, Offsite training, offsite repairs.\n\n Required Qualifications \n • High School or equivalent.\n, • 3-year experience in welding fabrication. ASME experience a plus.\n, • Requires a current forklift license (Training and Certification issued by Watts)\n, • Ability to use and understand dimensional tools including tape measure, calipers, and weld gauges.\n, • Aptitude to read blueprints and welding symbols.\n, • Ability to follow instructions.\n, • Good communication skills.\n, • Ability to pass a 2G GMAW Welding Test\n, • Ability to pass a 2G GTAW Welding Test\n, • Initiative to self-train and advance to Welder A. 6G pipe test required for advancement.\n\n Preferred Qualifications \n • 3-5 years ASME pressure vessel fabrication experience\n, • Combination welder (GMAW, GTAW)\n, • Experience with Duplex Stainless Steel and/ or welding Exotic materials.\n, • Fanuc robot programming and operation.\n, • Lincoln Electric welder machine experience. Setting, adjusting and programming. \n\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth, Texas location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 40 pounds.\n, • Ability to push and pull up to 150 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, safety glasses, welding hood including a forced air induction welding hood.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. This position is on site at Watts Fort Worth, Texas location #LI (Onsite) Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: Welder A - GMAW/GTAW Responsible for welding materials to build vessels or components as specified by blueprints and work orders. Layout and use arc cutting equipment and fit up parts per engineered production drawing. Fabricate pressure vessels and other parts using GMAW and GTAW processes. This position is responsible for ensuring that all welding is completed with the qualified Weld Procedure Specification (WPS). To ensure that product is built to required code specifications and approved Engineering drawing. This position reports to the Lead man of the designated area. This role is based at our Fort Worth, Texas location and may be placed on our 1st or 2nd shift. This position will be on the manufacturing floor and will be responsible for utilizing the Kiosks located throughout the shop. Primary Job Duties and Responsibilities \n • Welds on tanks, heat exchangers and subassemblies using GMAW or GTAW processes.\n, • Follows requirements provided by ASME Section 1, Section IV, HLW, and Section VIII Division 1.\n, • Builds parts according to working instructions and engineered production drawings.\n, • Performs duplex stainless steel and carbon steel welding.\n, • Reviews the work order, bill of material (BOM), and blueprints to understand the job details.\n, • Gathers parts and chooses appropriate tools and equipment to set up work area.\n, • Performs grinding, fitting-up, fixturing parts, sanding and welding per design drawing.\n, • Moves products through the area with equipment such as a forklift and/or overhead crane.\n, • Changes out consumables and handles upkeep on tools such as sharpening tungsten etc.\n, • Keeping time and inventory in Epicor.\n, • Cleans up area and equipment daily.\n, • Attends safety training and department meetings.\n, • Provides guidance and training for co-workers with less experience.\n, • Assume responsibility for other projects and duties as assigned by Supervisors and/or managers and other applicable Company management teams.\n\n\n, • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n, • Travel Requirements: Less than 10% of travel. Examples of travel: Inner company training, Offsite training, offsite repairs.\n\n Required Qualifications \n • Required to follow and abide by company safety policies.\n, • High School or equivalent.\n, • 3-5 years of experience in welding fabrication on ASME pressure vessel.\n, • Ability to use and read measuring tools such as tape measure, calipers and weld gauges.\n, • GMAW and GTAW certification in 2G and 6G positions.\n, • Aptitude to read blueprints and welding symbols.\n, • Strong oral and written communications skills.\n, • Good interpersonal skills.\n, • Proficient personal computer and Microsoft Office skills.\n, • Ability to follow instruction provided by Leadman and Supervisor.\n\n Preferred Qualifications • 5 years of ASME pressure vessel fabrication experience\n\n, • Combination welder (GMAW, GTAW)\n, • Ability to weld small diameter pipe in all positions.\n, • Experience with Duplex Stainless Steel and/ or welding Exotic materials.\n, • Fanuc robot programming and operation.\n, • Lincoln Electric welder machine experience. Setting, adjusting and programming. \n, • knowledge and skills to determine and/or apply established procedures/techniques and ensure safety standards are met. On occasion you may need to design and build fixtures to meet product needs.\n, • Ability to think outside the box to provide new processes and procedures to increase efficiency across the work cells.\n\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth, Texas location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 40 pounds.\n, • Ability to push and pull up to 150 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, safety glasses, welding hood including a forced air induction welding hood.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. This position is on site at Watts Fort Worth, Texas location #LI (Onsite) Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Job ID: 703373BR Date posted: Aug. 28, 2025 Description: At Lockheed Martin Skunk Works®, we don't follow innovation-we lead it. With operations in Palmdale, CA, Fort Worth, TX, and Marietta, GA, our legacy is rooted in creating the most advanced aircraft in the world. We're looking for forward-thinking talent to join our newly formed Production Engineering Program Assist Team: a hands-on group supporting the seamless transition of breakthrough concepts into real-world, production-ready aircraft. What You Will Be Doing: As a senior level authority with 20 years of experience In fabrication and assembly producibility analysis in Metallic Structures & Composites,-you will serve as a trusted subject matter expert, applying your knowledge of composite and metallics fabrication and structural full size determinant assembly (FSDA) producibility, and advanced manufacturing techniques to support our most cutting-edge programs. You will: • Collaborate across design and production teams to optimize aircraft structures for FSDA and design for cost manufacturability at our advanced development sites., • Lead design-for-manufacturability (DFM) and concurrent engineering efforts to ensure new designs are scalable and ready for fast-paced production environments., • Guide engineering decisions with deep insight into modern materials, tooling approaches, and emerging manufacturing methods-especially in FSDA composites and metallic structures fabrication and assembly., • Influence design and manufacturing direction by translating complex technical concepts into compelling long term production rate narratives for senior leadership., • Drive technology adoption across our Skunk Works campuses, from digital twin integration to additive manufacturing workflows., • Serve as a bridge between engineering, manufacturing, and program teams across our locations ensuring alignment, knowledge sharing, and execution excellence., • Security Clearance : Final Secret Clearance investigation within the last 5 years will be required. What's In It For You: We offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus - if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. Who You Are: You're a systems thinker, innovator, and doer-someone who's as comfortable guiding digital transformation initiatives as they are reviewing a CAD model or supporting the production floor. Whether based in California, Texas, or Georgia, you bring sharp technical skills, strong communication, and a passion for transforming aerospace design into production reality. Further Information About This Opportunity: • This position can be located in Palmdale, CA à Discover Palmdale., • This position can be located in Marietta, GA à Discover Marietta., • Full Size Determinate Assembly: Experience with design and assembly processes to support minimal drilling, shimming and tooling on assembly in metallics and composites. Understand and practice efforts to minimize variation through the use of Variation Management tool suites., • Design for Manufacturability (DFM) and Design for Cost: In-depth knowledge of design principles and in depth experience with digital tool suites that ensure producibility, including tooling design, assembly design & simulation, tolerance analysis, geometric dimensioning, and tolerancing (GD&T)., • Manufacturing Processes: Familiarity with various manufacturing processes, such as composite and metallic machining, additive, bonding, forging, and 3D printing., • Digital Twin and Simulation: Experience with digital twin technologies; experience with simulation tools to drive optimization and virtual manufacturing solutions., • Computer-Aided Design (CAD): Expertise in CAD software, such as CATIA V5, V6 or NX, to analyze and optimize designs., • Relevant professional certifications, such as PMP, Six Sigma, or Lean Manufacturing., • Knowledge of current Product Lifecycle Manager (PLM) methods in 3DX and / or Teamcenter Accelerator, advances, and enablement of integrated workflows., • Knowledge of cost estimation principles and practices to estimate manufacturing costs and optimize design for cost., • Familiarity with supply chain management principles and practices to ensure effective supplier selection and management., • Understanding of risk management principles and practices to identify and mitigate risks associated with design and manufacturing., • Familiarity with Industry 4.0 principles and technologies, such as IoT, artificial intelligence, and machine learning., • Understanding of digital twin principles and applications to optimize design, manufacturing, and maintenance., • Knowledge of cutting edge manufacturing processes and technologies such as 3D printing and additive manufacturing; advanced materials and composite structures; and reusability and refurbishment of vehicles., • Familiarity with manufacturing processes and technologies such as advanced robotics and automation systems; AI-powered quality control and inspection systems; and lightweight materials and structures (e.g., carbon fiber, aluminum)., • Experience with manufacturing processes and technologies specific to the aerospace and defense industry such as high-performance materials and coatings; advanced propulsion systems and power generation; and secure and reliable communication systems., • Effective collaboration and communication skills to work with cross-functional teams, including design, manufacturing, and suppliers., • Strong problem-solving and adaptability skills to address complex technical challenges and evolving project requirements., • Leadership and mentoring skills to guide and develop junior engineers and influence design and manufacturing decisions. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: AERONAUTICS COMPANY Relocation Available: Possible Career Area: Manufacturing Type: Full-Time Shift: First

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Scope of Position: Welder B - GMAW/GTAW Responsible for building components used in the manufacturing process. Performs complex tasks related to welding fabrication. Fit up, tack weld and final weld out of ASME pressure tanks. This position is responsible for ensuring that all welding is completed with the qualified Weld Procedure Specification (WPS). To ensure that product is built to required code specifications and approved Engineering drawing. This position reports to the Lead man of the designated area. This role is based at our Fort Worth, Texas location. This position will be on the manufacturing floor and will be responsible for utilizing the Kiosks located throughout the shop. Primary Job Duties and Responsibilities \n • Pulls parts listed on the bill of material (BOM) and checks against blueprints and work orders.\n, • Follows rules that are required by ASME Section 1, Section IV, HLW, and Section VIII Division 1.\n, • Builds parts according to working instructions and engineered production drawings.\n, • Performs duplex stainless steel and carbon steel welding.\n, • Checks all tools and performs preventive maintenance.\n, • Changes out consumables and assists with the maintenance of tools.\n, • Check overhead cranes to ensure they are functioning properly. Complete daily crane safety logs.\n, • Utilizes crane and/or forklift for material handling.\n, • Assists with the inspection of parts and inventory reviews.\n, • Attend regular safety meetings and training.\n, • Gathers, cleans, and inspects safety gear.\n, • Organizes and cleans work area daily.\n, • Provides guidance and answers questions for colleagues with less experience.\n, • Assume responsibility for other projects and duties as assigned by Supervisors and/or managers and other applicable Company management teams.\n, • Responsibility directly tied to Watts Value (Integrity, Accountability, Continuous Improvement, Transparency)\n, • Travel Requirements: Less than 5% of travel. Examples of travel: Inner company training, Offsite training, offsite repairs.\n\n Required Qualifications \n • High School or equivalent.\n, • 3-year experience in welding fabrication. ASME experience a plus.\n, • Requires a current forklift license (Training and Certification issued by Watts)\n, • Ability to use and understand dimensional tools including tape measure, calipers, and weld gauges.\n, • Aptitude to read blueprints and welding symbols.\n, • Ability to follow instructions.\n, • Good communication skills.\n, • Ability to pass a 2G GMAW Welding Test\n, • Ability to pass a 2G GTAW Welding Test\n, • Initiative to self-train and advance to Welder A. 6G pipe test required for advancement.\n\n Preferred Qualifications \n • 3-5 years ASME pressure vessel fabrication experience\n, • Combination welder (GMAW, GTAW)\n, • Experience with Duplex Stainless Steel and/ or welding Exotic materials.\n, • Fanuc robot programming and operation.\n, • Lincoln Electric welder machine experience. Setting, adjusting and programming. \n\n General Applicable Company Competencies \n • Commitment to Watts' values of integrity, accountability, continuous improvement and innovation, and transparency.\n, • Punctuality and dependability.\n, • Ability to be flexible and adapt to changing work priorities and stressful conditions.\n, • Adherence to all personnel policies, procedures, and standards of process as implemented by Watts.\n, • Maintain productive and collaborative relationships with other Watts employees.\n, • Adherence to Watts' seven cultural beliefs: Growth Mindset, Customer-Focused Innovation, Constant Communication, Clear Goals, Collaborate Globally, Be Inclusive, and Take Action.\n\n Working Conditions: While performing the job duties, you will be working on-site in a manufacturing facility. You will be required to work at the Company's Fort Worth, Texas location. Your scheduled work hours will be communicated to you by your manager. Physical Requirements: Specific physical abilities required for this position include, but are not limited to: \n • Ability to stand for long periods of time.\n, • Ability to lift and carry up to 40 pounds.\n, • Ability to push and pull up to 150 pounds.\n, • Ability to physically move around manufacturing floor.\n, • Ability to read documents and communicate clearly with management and coworkers.\n, • Ability to wear personal protective equipment, which may include, but is not limited to, safety shoes, hearing protection, safety glasses, welding hood including a forced air induction welding hood.\n\n Nothing in this job description restricts Watts' right to assign or reassign duties, responsibilities, and working hours/conditions to this position at any time. This position is "at will," which means that either the employee or Watts may terminate the employment relationship at any time, with or without notice, and for any lawful reason. This position is on site at Watts Fort Worth, Texas location #LI (Onsite) Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

We're Watts. Together, we're reimagining the future of water. We feel proud every day about what we do. We're all part of the same crucial mission, no matter what function we support -- it's to provide safe, clean water for the world, and to protect our planet's most valuable resource. What we do: For 150 years, Watts has built best-in-class products that are trusted by customers in residential and commercial settings across the world. We are at the forefront of innovation, working with cutting-edge technology to provide smart and connected, sustainable water solutions for the future. Watts is a leading brand with a quality reputation - and we have a dynamic future ahead. Under the guidance of the Welder A, Sheet Metal B will manage the set up and operations of several sheet metal machines to fabricate components to specifications. You Will: \n • Locate the correct gauge of sheet metal for the job.\n, • Set up the machine according to job requirements.\n, • Lay outlines, reference points and dimensions on materials.\n, • Follow blueprints, rough sketches or engineering drawings to shape metal.\n, • Shape work piece to a specific configuration.\n, • Join sheet metal subassemblies together to make finished product.\n, • Inspect part with measuring device to assure it is within tolerances to the blueprint.\n, • Set part on table for final inspection.\n, • Keep track of and report safety issues.\n, • Drive a forklift, work around equipment and machinery, and operate foot controls.\n\n You Have: \n • High School degree or equivalent.\n, • 3+ years of sheet metal fabrication experience.\n, • Knowledge of the standard methods and practices of the sheet metal trade.\n, • Read blueprints.\n, • Must be able to read a tape measure and do basic math.\n, • Must have good manual dexterity and hand-eye coordination to make precise bends and cuts in metal.\n\n Physical Requirements: While performing the duties of this job, the employee is frequently required to walk, talk, and/or hear. The employee is occasionally required to stand, sit, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include: close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: Work in both office and manufacturing environment. May occasionally be required to perform job duties outside the typical office setting. Watts in it for you: Please note that the following benefits apply only to permanent roles and do not apply to internship roles. \n • Competitive compensation based on your skills, qualifications and experience\n, • Comprehensive medical and dental coverage, retirement benefits\n, • Family building benefits, including paid maternity/paternity leave\n, • 10 paid holidays and Paid Time Off\n, • Continued professional development opportunities and educational reimbursement\n, • Additional perks such as fitness reimbursements and employee discount programs\n How we work: At Watts, our culture is team-oriented and supportive. Employees here genuinely care about the quality of their work, and about each other. Our people are the heart of who we are and contribute to our longevity and continued success. And this is a place where you can have a big career. No matter your role, there are opportunities for learning and development, and your daily contributions make a meaningful impact on the lives of people who use our products and on the future of water. Watts is committed to equal employment opportunity. We follow a policy of administering all employment decisions and personnel actions without regard to race, color, religion, creed, sex, pregnancy, national origin, sexual orientation, age, physical or mental disability, genetic disposition or carrier status, marital status, military or veteran status, minorities, or any other category protected under applicable federal, state, or local law. Consistent with the obligations of state and federal law, Watts will make reasonable accommodations for qualified individuals with disabilities. Any employee who needs a reasonable accommodation should contact Human Resources.

Job Description The Senior CAD Technician is part of a civil engineering design team involved in a variety public infrastructure and transportation improvement projects (i.e., streets, drainage, water, sanitary sewer, etc.). The position is a lead technical support role in our Fort Worth Headquarters. Responsibilities • Using established CAD standards to prepare electronic drawings from minimum marked-up plans and/or verbal instruction by engineers/designers, • Oversight of CAD systems management, refinement and evolution of standards, • Organizing and scheduling your own work, and at times, the work of other team members to accomplish project goals within established budgets and schedules, • Coordination with engineers and other design team members Education/Certification • High School graduate or GED required, • Post-high school technical coursework, certification or degree in computer drafting/design or related field preferred Professional • Responsive and results-oriented in service to clients, • 8-10 years of civil CAD experience and understanding of a variety of projects including residential subdivisions, public infrastructure improvements (i.e., streets, drainage, water, sanitary sewer, etc.), site development projects involving parks, schools, churches, hospitals, and retail/commercial centers, • Proficient in the latest version of AutoCAD Civil 3D, as well as Microsoft Word and Excel, • Demonstrated ability to develop solid working relationships with other team members, • Ability to quickly adapt to and adopt new CAD standards and procedures, • Commitment to quality in the design and presentation of drawings Benefits • A competitive hourly wage, dependent on skills, qualifications, and experience, • Overtime pay for additional hours worked in excess of 40 hours, • Generous performance-based bonus opportunities, • Medical, dental, and vision insurance, all beginning on the first day of employment, • Life and disability insurance, • A 401(k) plan with a partial company match, • A Health Savings Account, • Paid time off, • In-office gym, • An extensive learning and development program, • Tuition reimbursement, • Financial Advising

Job Description NextGen Security LLC Job Summary Company NextGen Security, LLC Location Dallas, TX Industries Security and Surveillance Job Type Full-Time Employee Career Level Entry Level to Experienced (Non-Manager) Exemption Status Non-exempt Warehouse Coordinator What we’re looking for: We are in search of a self-motivated individual to join our fast-growing and dynamic team. What you’ll be doing: The responsibilities of this position will vary, but primarily focus on warehouse and inventory management for our Dallas office. We are looking for someone who is extremely professional and courteous as this individual will be dealing with customers, vendors, and fellow employees. This position is one we hold in high regard to provide the level of service excellence our customers expect and deserve. Specific duties to include: • Receive all delivered equipment daily in accounting software., • Work effectively with Project Managers to stage receipts for jobs., • Organize and maintain a clean, efficient, and presentable warehouse., • Coordinate all outbound courier shipments and job site deliveries., • Manage equipment returns (credit) and repairs., • Oversee warehouse inventory and distribute stock for projects as needed. What you bring to the table: • Associate’s degree or equivalent degree or experience., • Ability to operate a company vehicle., • Ability to lift 25 pounds or more., • Ability to climb ladders., • Customer Service experience (preferred)., • Experience with Microsoft Word, Excel, and Outlook., • Experience with various shipping software platforms, UPS WorldShip, and FedEx (preferred)., • Understanding of freight scheduling., • International shipping knowledge and documentation (preferred). Additional Skills • Must be able to communicate effectively and professionally in both written and verbal manner to customers, vendors and to those within the company., • Must possess a positive attitude and be willing to interact with customers, co-workers, and other personnel at all times., • Commitment to integrity and Company Standards and Procedures., • Attention to detail and accuracy is a must and ability to handle confidential information. We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job Description Senior Construction Project Manager Job description Position Overview: The Senior Project Manager plans, directs, and coordinates activities of designated projects to ensure that goals or objectives of project are accomplished within prescribed time frames. This position will ensure that multiple projects will be completed simultaneously in various locations by multiple teams of Project Managers, Superintendents, and Project Engineers. Responsibilities: • Plan for large-scale, multi-step projects., • Select through a bidding process; subcontractors and materials in alignment with the owners, • Communicate efficiently with subcontractors, owners, and team members actions that need to be taken, expectations, and follow-up, • Must know construction methodologies, read blueprints and understand other technical aspects of construction., • Time-Management: Deadlines are crucial in construction. Making sure that everything is on time and moving smoothly is a critical part of the job., • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Establishes work plan and schedule and coordinates completion of the project through the subcontractors, and project superintendent, • Responsible for maintaining project budget, • Approves all project billings, manages change orders with client and subcontractors and approves all project costs, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with estimating and accounting personnel to provide technical advice and to resolve problems, • B.S or B.A in Construction Science, Engineering, Architecture, or related field, • Minimum five years of experience in building commercial construction as a Project Manager, • Experience in completing project in joint venture work preferred, • Experience/ability to direct/manage projects exceeding $15M, • Strong computer skills including, but not limited to, word processing, spreadsheets, estimating, and project management program Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off daily temperature checks, optional masks are available Ability to commute/relocate: • Bachelor's (Required) Company DescriptionWe are a boutique style professional company in commercial construction, program management, commercial real estate and technology. We specialize in large-scale projects with a small-scale team. Located in Arlington, Tx, we value independent, innovative personalities who are wanting the responsibility of running their own project. We are an African American owned business, which values individuals of all backgrounds, who believe that discrimination is not a hurtle but a reason to perform at a top level to competitive level. If you also believe in these values and enjoy construction, please apply.We are a boutique style professional company in commercial construction, program management, commercial real estate and technology. We specialize in large-scale projects with a small-scale team. Located in Arlington, Tx, we value independent, innovative personalities who are wanting the responsibility of running their own project. We are an African American owned business, which values individuals of all backgrounds, who believe that discrimination is not a hurtle but a reason to perform at a top level to competitive level. If you also believe in these values and enjoy construction, please apply.

Job Description Chaparral is seeking an experienced Senior Firestop Project Manager to lead project sales, operations, and client relations for various types of projects in our North Texas Region. The ideal candidate will possess a strong background in Firestop Materials, Building Code requirements, Operations management, combined with excellent project management skills. Duties • Develop comprehensive project plans, timelines, and budgets for Firestop projects., • Utilize the Chaparral internal estimating system to accurately estimate project costs, including labor, materials, and time requirements. Allocate resources effectively, managing staffing, materials, and equipment needs., • Coordinate with cross-functional teams to meet project objectives and deadlines., • Supervise, mentor, and support project managers, site supervisors, and installation crews., • Conduct regular team meetings and performance evaluations to maintain high standards of productivity., • Track and report field productivity to corporate leadership. Foster a culture of safety, quality, and continuous improvement., • Build and maintain strong client relationships to ensure satisfaction and repeat business., • Liaise with subcontractors, suppliers, and vendors to coordinate project requirements., • Ensure all Firestop work is completed according to industry standards, Building Code requirements, project specifications, and regulations., • Conduct site visits and inspections to monitor progress, quality, and safety., • Ensure compliance with local building codes, OSHA, and company safety policies., • Manage project budgets, reviewing costs, tracking expenses, and ensuring profitability., • Identify cost-saving opportunities without compromising on quality or safety., • Prepare and present monthly bills and financial reports, • Anticipate potential project risks and develop proactive mitigation strategies., • Bachelor’s degree in construction management, Engineering, Business, or a related field preferred but not required., • 7+ years of project management experience, ideally in Firestop or construction., • Proficiency in project management software (e.g., Bluebeam, Procore, Microsoft Office), • Strong understanding of Firestop materials, installation techniques, and safety standards., • Excellent leadership, communication, and problem-solving skills., • Ability to travel to job sites and manage multiple projects concurrently., • Knowledge of estimating software and tools for construction. We are an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. For more information, view the EEO - Know Your Rights and Pay Transparency Statement. Company DescriptionChaparral is a company built on a foundation of collaboration, innovation, and a commitment to excellence. Our leadership team exemplifies outstanding skills by fostering open communication, attentiveness, and a genuine investment in the success of every team member. At Chaparral, you’ll find a supportive environment where your contributions are valued, and opportunities for growth are always encouraged.Chaparral is a company built on a foundation of collaboration, innovation, and a commitment to excellence. Our leadership team exemplifies outstanding skills by fostering open communication, attentiveness, and a genuine investment in the success of every team member. At Chaparral, you’ll find a supportive environment where your contributions are valued, and opportunities for growth are always encouraged.

Job DescriptionJoin our world-class team in Fort Worth, TX Step onto our production floor and take ownership of precision sheet metal work using advanced CNC equipment. You'll set up and run Trumpf punch presses and press brakes, program parts, verify quality, and support finishing operations that keep our products moving. Schedule & Pay • Shift Hours: 2nd Shift; 3:00 PM – 11:30 PM, • Hourly Rate: $18.00 – $25.00 with a shift differentialA day in this role, • Kick off your shift with blueprint review and part program setup., • Operate and adjust CNC punch and press brake to hit spec—every time., • Run quality checks, measure critical features, and document results., • Support finishing: drilling, tapping, deburring for clean, ready-to-ship parts., • Perform preventive maintenance and light equipment repairs to minimize downtime., • Coordinate counts and material flow with Purchasing and Shipping., • Wrap up by organizing your cell, staging next jobs, and completing any assigned tasks from Supervision.Core responsibilities, • Set up and operate fabrication machinery for flawless production processes, • Program parts, read blueprints, and perform in-process quality checks, • Assist in finishing operations: drilling, tapping, deburring, • Conduct preventive maintenance and light repairs on processing equipment, • Organize, identify, and verify material counts with Purchasing and Shipping, • Maintain a clean, orderly work area; support additional duties as assignedWhat you bringBasic qualifications, • Ability to speak, read, write, and comprehend the English language, • Capability to reach, grasp, lift 75 lbs, and push/pull/slide heavy material, • Strong hand–arm coordination for precise part handling, • Flexibility to stoop, bend, and squat, • Mechanical aptitude, computer competency, and willingness to operate industrial machinery, • Legally authorized to work in the United States on a continual and permanent basis without company sponsorshipPreferred qualifications, • High school diploma or equivalent experience, • Ability to interpret engineering drawings and schematics, • Prior experience as a foreman or warehouse trainerTechnical proficiency, • CNC Machine Installation, • Troubleshooting CNC Machines, • Shop Math Skills, • Blueprint ReadingEquipment you’ll handle, • Punch Press (Trumpf), • Press Brake (Trumpf)

Job DescriptionPSC Biotech provides the life sciences with essential services to ensure that health care products are developed, manufactured, and distributed to the highest standards, in compliance with all applicable regulatory requirements. Our goal is to skyrocket our clients’ success, and you can be a part of our team’s achievements. Employing a global team of skilled professionals and experts that span across strategically located offices in North America, Europe, Asia and the Middle East, we are proud of the roles we have fulfilled to help our clients achieve success. The Experience With operations spanning the globe and featuring a multi-cultural team, PSC Biotech® is passionate about bringing the best and brightest together in an effort to form something truly special. When you make the decision to join our team, you will be offered the ability to feel inspired in your career, explore your professional passions, and work alongside a group of people who will value and nurture your talents. We are firm believers in coaching and developing the next generation of industry leaders and influencers. As such, you will not only be offered compensation and benefits structure that rewards you, but also be provided with the tools that will help you grow and learn. At PSC Biotech®, it’s about more than just a job—it’s about your career and your future. Your Role Senior CQV Engineers are responsible for leading commissioning, qualification, and validation projects for pharmaceutical facilities, utilities, equipment, and systems. Our Senior CQV Engineers play a critical role in overseeing project planning, CQV execution, and ensuring the operational readiness of capital projects in order to support our clients’ success. • Drive project success by assessing priorities and project plans, schedule, and budget, and ensure timely and effective resolution of potential risks and issues., • Develop and execute commissioning, qualification, and validation protocols for required equipment and systems., • Prepare and maintain comprehensive documentation, including validation protocols, plans, reports, and standard operating procedures., • Identify and assess risks associated with CQV activities and develop mitigation strategies., • Troubleshoot and resolve issues related to equipment and process performance., • Collaborative with cross-functional teams to ensure alignment of CQV activities and project timelines., • Serve as liaison between vendors and contractors, coordinating required hand-offs., • Ensure compliance with regulatory requirements (FDA, EMA, etc.) and industry standards (GMP, GAMP, etc.)., • Provide ongoing support and technical expertise through validation execution and qualification activities., • Additional responsibilities as required. Requirements • Bachelor’s degree in engineering or a related field., • 7+ years of commissioning, qualification, and validation engineering experience in the pharmaceutical and/or biotech industries., • Proven success in leading CQV projects and experience with project management methods and tools., • Experienced coordinating schedules, timelines, resources, and budgets., • Advanced knowledge of regulatory requirements and industry standards., • Experience with validation lifecycle management and risk-based approaches., • Expertise in full CQV project lifecycle execution from planning, initiation, execution, and closeout., • Excellent analytical and technical problem-solving skills. Ability to analyze project risks effectively and implement resolutions., • Strong technical writing skills and understanding of full lifecycle documentation (protocols, reports, procedures, risk assessments, specifications and requirements, etc.), • Effective communication and interpersonal skills. Ability to manage stakeholder communication and cross-functional team collaboration., • Proactive with strong organization and time management skills., • Excellent attention to detail with commitment to quality and compliance. #LI-JD1

Job Description Legacy Talent Search is currently seeking candidates for a Entry-Level Electronics Production role in Fort Worth. Our client is a well-established leader in the electronics manufacturing industry, known for cutting-edge innovation and a commitment to delivering high-quality electronic components and systems. With a strong culture of continuous improvement, they maintain excellence at every stage of the manufacturing process. Key Responsibilities: · Assemble, inspect, and test electronic components and circuit boards following standard operating procedures. · Operate and monitor production equipment such as soldering stations, pick-and-place machines, and reflow ovens. · Perform basic troubleshooting and quality checks to ensure products meet exacting specifications. · Follow detailed assembly instructions, wiring diagrams, and blueprints. · Maintain clean and organized workstations in accordance with 5S and ESD (Electrostatic Discharge) protocols. · Accurately document production data, including part numbers, lot tracking, and test results. · Collaborate with production and engineering teams to meet daily output goals and resolve assembly issues. · Assist in packaging and preparing finished electronics for shipment. · Promptly report equipment malfunctions, quality issues, or safety concerns to supervisors. Qualifications: · High school diploma or equivalent; technical coursework or interest in electronics a plus. · No prior electronics experience required—entry-level training provided! · Ability to perform fine motor tasks with precision and handle small components. · Comfortable working with tools such as soldering irons, tweezers, and magnification equipment. · Strong attention to detail, accuracy, and a commitment to quality. · Team-oriented with good communication and problem-solving skills. · Ability to lift up to 30+ lbs and sit or stand for extended periods. · Willingness to work swing shift hours and overtime as needed. What We Offer: · Competitive hourly wage. · Comprehensive benefits package including health insurance, dental, and paid time off. · Ongoing training and development in electronics manufacturing. · Career growth opportunities in a stable and innovative industry. · Supportive and inclusive workplace culture that values your contribution. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community—how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

Job Description Operations Manager Job Summary The Site Manager is responsible to provide leadership and strategic direction for the implementation of projects and systems related to SQT function, quality containment, part clearing, non-conforming/OGM material, MIS administration, Yard Audits, and special activities including serving as a customer liaison. This is in an automotive factory/warehouse environment. · Serve as Customer liaison. · Interface with various customer groups like Quality, Logistics, Material planning etc. to support containment related activities. · Develop/Facilitate Scrap Management Process. · Develop/Facilitate Containment processes in all areas of operations at local and off-site locations. · Develop/Facilitate Pre-Series and Electronic parts clearing processes. · Develop and maintain standard processes, procedures work instructions. · Conduct training of personnel to Standardized Processes. · Develop and maintain the Document Control system. · Maintain the Corrective/Preventive Action Record system. · Support continuous improvement projects. Must be willing to travel to support new launches. · Body of Knowledge Site Managers must have knowledge and understanding of Quality Engineering principals, containment practices and have ability to implement, execute, and supervise team performance. Must have good problem-solving knowledge and ability and can effectively communicate both written and orally. Must possess working knowledge of continuous improvement, corrective/preventive action, and root cause analysis. Must be able to set up and perform process measurements using KPI/Metrics. You must be able to perform training. They should demonstrate strong management skills. It is also required that he/she have as solid understanding of Microsoft Office and Email. It is preferred that the Operations Manager have PPAP, FMEA, PSO and SPC experience. Follow and implement 5S policies. · Technical Requirements The Site Manager is required to read and understand technical and non-technical documents as they relate to quality functions within the business. This includes the ability to interface with both technical and non-technical personnel. · Experience Minimum of 5 years’ experience in Automotive. Microsoft Office, Quality Processes, Human Relations, Customer Service, Self-starter, Pro-active, Negotiation & Problem Solving, Root Cause Analysis Job Type: Full-time

Job Description Originally established to help dealers meet the growing needs of their niche consumers, Integral dx has become adept at providing OEM products tailored to the specific needs of its clients. Today Integral dx offers a family of products designed and built to meet the needs and challenges out in the field. Learn more about us at integraldx.com and apply today! SALARY: Base salary plus commission BENEFITS: Medical, Dental, & Vision Insurance; HSA/FSA options, Accident & Critical Illness Insurance; Short- and Long-Term Disability; 401(k) with Employer Match; Term Life Insurance; Employee Assistance Program; Employee-of-the-Month and Year; RITALKA University As the MidSouth Construction Equipment Sales Specialist, your primary responsibility will be to drive business results within your defined geographical region, including, but not limited to, marketing, sales, and service coordination. Activities within the region will be a combination of direct sales and service, dealer sales and service, and distributor sales and service. This position requires regular travel within the region and involves making strategic face-to-face sales calls to enhance Integral dx's overall sales opportunities. With the help of leadership, this position would assist in building senior level relationships with key customers in the region and would identify and enhance sales opportunities. What does a Construction Equipment Sales Specialist do at Integral dx? • Research current market to develop and maintain accurate regional contact database. Use research and build relationships to understand customer applications to help determine where sales opportunities reside and convert opportunities into new business, • Contact and meet regularly with current and prospective customers to develop and embrace the relationship, • Plan, execute, and follow up on product demonstrations, • Understand and review product drawings, 3D models, and bills of material of all configurations for use in presenting products, their options, and proposals to prospective customers. Answer technical and applications questions on products with ability to liaise with engineering and/or manufacturing departments for complex questions while keeping customers engaged, • Prepare, review, and present product sales proposals for each opportunity that meets the customer's needs. Utilize effective communication with customers, both internally and externally, related to quotes, competitive information, trade shows, threats, opportunities, and follow-up. Work with engineering and manufacturing departments to get accurate data and specifications on proposals and to pass on pertinent information after project is won. All proposals must be approved by Integral dx Quote Committee, • Gain a working knowledge of MRP to assist in managing, prospecting, and closing sales opportunities, • Conduct new product delivery training and/or commissioning and promote aftermarket offerings including service part sales, • Coordinate any warranty and/or service work within the region; Light service work may be performed by the Territory Manager, • Participate in developing marketing strategies for territory and take ownership of carrying out finalized strategy, • Participate in regional associations, regional and national trade shows, and lead the follow up effort; Prepare and/or assist in the preparation of exhibitor lists for trade shows, • Participate in business planning and/or budget planning, • Participate in training of new Territory Managers as needed, • Achieve and maintain proficiency in manufacturing and engineering terminology, • Bachelor's degree, • 5+ years sales experience in mobile equipment, preferably with concrete mixer trucks, • Willing and able to travel up to 75% of the time; must have a valid passport, a good driving record, be eligible to rent a vehicle, and meet entry requirements to travel to Canada and other countries, • Able to read and interpret documents and write routine reports and correspondence, • Speaks effectively before groups of customers and Integral dx employees, • Experienced in Microsoft Office - Outlook, Excel, Word, PowerPoint, Microsoft Project, etc., • Uses advanced technology, including smart devices, • Has knowledge of machinery, equipment, material, bill of materials, etc., • Utilizes strong active listening skills The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Integral dx Overview When it comes to recruiting, many companies focus on an applicant's faults - what doesn't fit, what experience they don't have, etc. Our philosophy is different in that we are actively looking for a reason to hire someone. Integral dx is an OEM equipment and attachments producer that includes machinery in construction, agriculture, and mining industries. As part of our commitment to our customers, we also provide after-market parts and service support for our products. At Integral dx, we take the needs of customers and quality of our products very seriously. We pride ourselves on finding solutions that work efficiently and effectively. Learn more about us at integraldx.com. Why You Should Apply Here Integral dx is a family-owned company focused on creating jobs in rural communities in the upper Midwest; purposefully deciding to create jobs away from the chaos of larger metro areas. Our company values help to foster strong relationships with not only our employees and customers, but also our communities. We take pride in finding careers that fit the person rather than a person to fit a job which allows us all to do extraordinary things with ordinary people. We are an equal opportunity employer and consider all qualified applicants equally without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Job Description JOB SUMMARY The Manager CCUS Operations is responsible for overseeing the day-to-day maintenance, operations, and performance optimization of carbon capture, utilization, and storage systems. This role ensures the safe, efficient, and compliant operation of CCUS assets, while supporting long-term sustainability and decarbonization strategies. The manager works cross-functionally with engineering, EH&S, regulatory, and commercial teams to drive operational excellence and regulatory compliance. RESPONSIBILITIES • Oversee commissioning, start-up, and steady-state operations of CCUS systems.Monitor system performance metrics, identify improvement opportunities, and implement best practices., • Manage and develop a team of CCUS operators, technicians, and support personnel., • Ensure proper training, certifications, and readiness of field personnel., • Foster a culture of safety, integrity, and continuous improvement., • Ensure operations comply with federal, state, and local regulations, including EPA Class VI injection well permits as well as adhering to all lease agreements and operating agreements., • Conduct regular safety audits, incident investigations, and implement corrective actions., • Promote environmental stewardship in daily operations., • Coordinate with regulatory teams to maintain required operational records, reporting, and inspections., • Support MRV (Monitoring, Reporting, and Verification) protocols as required by federal tax credits (e.g., 45Q)., • Develop and oversee preventive and predictive maintenance programs for CCUS assets., • Work with engineering teams to assess equipment performance and reliability., • Manage contracts and vendors supporting maintenance activities., • Develop and manage operating budgets and volume forecast for CCUS facilities., • Track cost and identify opportunities to improve operational efficiency and cost-effectiveness., • Point of contract for dCarbon Ventures and Copenhagen Infrastructure Partners. Responsible for providing all required reporting documents., • Partner with engineering, project development, EH&S, regulatory, and commercial teams to support ongoing and future CCUS projects., • Provide operations input during project design, risk assessment, and technology selection phases., • Provide input to operating agreements., • Proficient in Microsoft Office and job-related applications. Uses insights from digital tools to improve performance., • Strong analytical skills and attention to detail., • Excellent interpersonal and communication skills., • Ability to lead change and drive continuous improvement., • Proficiency in industry-specific accounting systems., • Ability to thrive in a dynamic fast-paced environment., • Ability to work independently and as part of a team., • Advanced interpersonal, collaboration and communication skills., • Advanced attention to detail, organization, and prioritization., • Advanced cognitive, decision-making and problem-solving skills., • Bachelor’s degree in Engineering (Mechanical, Chemical, Petroleum, or related field) or equivalent experience; advanced degree preferred., • 7+ years of operations experience in oil & gas, petrochemical, or industrial facilities; 3+ years in CCUS or emissions management preferred., • Experience managing Class VI injection wells and familiarity with EPA regulations., • Requires ability to perform repetitive motions, operate standard office equipment, potentially stand for long periods of time and engage in frequent bending, stooping, pushing, pulling, and lifting items in excess of 20lbs., • May be exposed to hazardous environments that would require PPE (personal protective equipment) to be worn.

Job Description NextGen Security LLC Job Summary Company NextGen Security, LLC Location Dallas, TX Industries Security and Surveillance Job Type Full Time Employee Years of Experience 7+ years within the security industry 2+ years of personnel management Career Level Experienced – Manager Exemption Status Exempt Operations Manager, Dallas What we’re looking for: We are seeking an experienced electronic security Operations Manager, Dallas, to join our fast-growing and dynamic team. This position will work directly with our Operations team, overseeing project managers, assistant project managers, program managers, programmers, and technicians. What you’ll be doing: This position will have multiple roles ranging from: management of both project managers and technicians, attending project meetings & job walks, onsite technician support, project quality control, assisting in forecasting & billing processes, conducting WIP reviews regularly to ensure maximum billings and revenue, reconciling month end numbers, attending onsite meetings, and most importantly, representing NextGen Security as a valuable point of contact for our valued customers. Travel may be required for this position. • Manage project managers and technicians, including conducting performance reviews and handling day-to-day needs, • Onsite support for technicians, project managers, and customers as needed, • Quality control for projects, • Attend large customer kick-off meetings and project calls to assist project managers, • Forecasting of projects with the project management team to ensure timely billings, • Subcontractor evaluation and oversight as needed, • Assist in recruiting and interview process for new hires, • Actively manage the mentoring program for entry level technicians, • Management and oversight of AIA Applications (Contract Review, Application Creation, Waiver Creation and Submission / Document Management), • Developing new procedures/processes or revising existing ones to improve efficiency and streamline activities What you bring to the table:  Bachelor’s degree in business or related field (preferred but not required).  7+ years of experience within the security industry.  2+ years of experience with personnel management.  Access Control System Vendor Certifications in Software House, Genetec, ProWatch and/or Lenel.  Video Management System Vendor Certifications in Genetec, Avigilon, and/or Milestone.  Strong organizational skills.  Ability to manage others and drive their performance metrics.  Superior problem solving and communication skills.  Ability to process and apply new skills/concepts quickly.  Work independently with minimal supervision.  Strong attention to detail.  Experience with Microsoft Office, Teams & Windows Operating Systems.  Experience with Microsoft Project, Procore, and other project management & design products (preferred but not required) What we bring to the table: • An awesome, collaborative culture, • Compensation based upon background and experience., • Full benefits package, • Vacation, • Vehicle allowance, • Cellphone allowance We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.

Job Description Job Summary Company NextGen Security, LLC Location Dallas, TX Industries Security Integration Job Type Full Time Employee Years of Experience 3-5 years of industry experience Career Level Senior Sales Person Exemption Exempt Senior Account Manager About the Job What we’re looking for: We are seeking an experienced sales person in the security industry to join our fast-growing and dynamic team. What you’ll be doing: This position will have multiple roles ranging from: developing new business, managing new and existing client needs, presenting solutions, technical knowledge for a broad range of products, working with operations and engineering on a regular basis to develop proposals and management of client security initiatives. Some travel may be required. • Management of customer accounts., • Regular communication with customers., • Assist in the management of projects with the Operations team., • Work independently without supervision., • Follow-up with customers and their requests., • Development of Account Manager and assist them as needed., • Project estimating., • Business Development., • Networking with vendors, suppliers and industry contacts., • Creation of quotes and scopes of work. What you bring to the table: • Excellent written and verbal communication skills., • A positive, collaborative attitude with a willingness to interact with customers, co-workers and other personnel., • Ability to manage multiple projects simultaneously with razor-sharp focus on the details., • A commitment to integrity and our Company Standards and Procedures., • BA/BS degree or equivalent. What we bring to the table: • An awesome, collaborative culture., • Compensation based upon background and experience., • Full benefits package., • Vacation., • Cellphone Allowance. We are an equal opportunity employer and drug- free workplace. Pre-employment drug screens and background checks will be conducted. Employees are subject to appropriate routine drug screens, based on job classification. Application Process Please submit your resume, references and your requested salary range when applying for this position to . More About Us NextGen Security is an electronic security systems integrator that offers commercial and industrial companies best in class industry knowledge, engineering design, implementation, management and on-going maintenance services. Our company accomplishes this by hiring only the most experienced and best-qualified talent the security industry has to offer. Management team and staff members have 10-25 years of commercial and industrial security industry expertise with single site, multi-facility, plant-wide, campus-wide, regional, national and international security projects. If that wasn’t convincing enough, check out what our employees say about working at NextGen: Notice To Employment / Recruitment Agents Employment / Recruitment agents may only submit candidates for vacancies only if they have written authorization to do so from NextGen Security’s HR department. Any agency candidate submission may only be submitted to positions opened to the agency through openings available via NextGen Security’s website. NextGen Security will only pay a fee for candidates submitted or presented where there is a contract communication in place between the Employment / Recruitment agents and NextGen Security, and only if the candidate is submitted via approval from NextGen Security’s HR department. Candidates submitted or presented by Employment / Recruitment Agents without a full approval from NextGen Security’s HR department shall not be deemed to form part of any Engagement for which the Agency may claim remuneration.