Process safety engineer jobs in Rochester, New YorkCreate job alerts

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

We are looking for a Manufacturing Process Engineer to join our Advanced Materials & Chemicals division onsite in Rochester, NY. You will support Film Finishing organization within the Industrial Films and Chemicals division at Eastman Business Park. In this role, you’ll provide mechanical and process engineering support for day-to-day operations and lead projects that enhance manufacturing efficiency, quality, and safety. Key Responsibilities: • Troubleshoot manufacturing issues and drive root cause analysis., • Lead capital projects from concept through implementation., • Design mechanical components and systems using SolidWorks and GD&T principles., • Own the process flow for assigned product lines, ensuring efficiency, quality, and continuous improvement., • Collaborate with operations, maintenance, and quality teams on process improvements., • Support documentation and quality systems to ensure compliance., • Apply Lean Six Sigma methodologies to optimize processes. Minimum Qualifications: • BS in Mechanical Engineering, Manufacturing or equivalent and 5–10 years of relevant experience OR Associate's degree and 5-10 years relevant experience., • Strong mechanical design skills and proficiency in SolidWorks., • Demonstrated ability to lead, plan, organize, and execute projects., • Excellent troubleshooting and problem-solving skills., • Proficiency in Microsoft Office (Excel, Word, Project)., • A strong work ethic, high motivation, and Self- Starter. . Preferred Qualifications: • Experience with Lean Manufacturing practices., • Knowledge of SPC, DOE, or Six Sigma process improvement methods., • Ability to use statistical methods for data analysis., • Strong communication skills and ability to thrive in a fast-paced environment. Learn more about Film Finishing:

Senior Diamond Turning Engineering Technician Industry: Ultra-Precision Manufacturing | Advanced Optical Systems Location: Rochester, NY (Onsite) Travel: 10-15% (As needed) Reports to: Engineering Manager Compensation: $90-110K annual salary + variable compensation About the Opportunity A highly respected, growth-oriented advanced manufacturing organization is seeking a Senior Diamond Turning Engineering Technician to lead and elevate its Single Point Diamond Turning (SPDT) operations. This is not a standard CNC role. This position sits at the intersection of ultra-precision machining, tooling engineering, motion control optimization, and process innovation, supporting the production of optically functional surfaces manufactured at the limits of tolerancing. This is a role for someone who thrives on solving complex manufacturing challenges and pushing the limits of what’s possible in precision machining. The organization serves demanding, high-technology markets where precision is non-negotiable and performance expectations are extreme. This is a highly visible, high-impact role within a technically sophisticated environment. Why This Role is Unique • Work on optically critical components requiring extreme form and finish precision., • Influence machining strategy, tooling design, and machine control at a systems level., • Drive measurable improvements in yield, throughput, and process capability., • Operate in a collaborative, engineering-driven culture., • Mentor and shape the next generation of ultra-precision technicians., • Be the technical authority in a high-performance SPDT environment. Key Responsibilities Ultra-Precision Machining & Process Development • Lead setup, programming, and operation of SPDT machine tools for ultra-precision optical components., • Develop and optimize machining processes to meet extreme form and surface finish requirements., • Generate and refine advanced CNC toolpaths using Mastercam and related platforms. Diamond Tool & Fixturing Engineering • Design and optimize custom diamond cutting tools (geometry, edge prep, application tuning)., • Engineer advanced fixturing/workholding systems to ensure alignment and repeatability., • Collaborate with internal teams and external vendors to improve tool performance and lifecycle. Machine Performance & Controls Optimization • Analyze machine dynamics including vibration, spindle behavior, and thermal effects., • Perform PID tuning and motion control optimization., • Troubleshoot process deviations using structured root cause analysis. Technical Leadership & Continuous Improvement • Partner with Quality, Metrology, and Production teams to ensure inspection alignment., • Drive improvements in cycle time, yield, and process capability., • Provide technical mentorship to diamond turning technicians across shifts. Maintenance & Process Governance • Ensure preventative maintenance and machine condition monitoring., • Maintain rigorous process documentation and parameter control., • Uphold precision manufacturing safety and cleanliness standards. Required Qualifications • 5+ years of diamond turning experience in ultra-precision manufacturing., • Advanced proficiency in Diffsys and Mastercam., • Proven expertise in diamond tool design and optimization., • Experience designing advanced fixturing for tight-tolerance components., • Strong knowledge of motion control systems and PID tuning., • Demonstrated ability to improve process capability and surface quality. Preferred Qualifications • Background in optical component manufacturing., • CNC machining and advanced metrology experience., • Experience with closed-loop compensation strategies or automation integration. Precision Talent Partners, LLC values diversity and is proud to be an Equal Opportunity Employer. We are committed to creating an inclusive workplace where all employees feel respected, supported, and empowered to contribute. This description reflects management’s assignment of essential functions and does not restrict the tasks that may be assigned. Employment is at-will, and this job description does not constitute a contract of employment.

What you will do The Energy Solutions Development Engineer Leader operates as a subject matter expert in a fast-paced, growth-oriented, national support team in Johnson Controls Building Solutions North America. The Solution Development Engineer role requires a self-directed, internally motivated and operates with personal integrity with a strong foundation for utility, state and federal program development, project design, estimating, and scope development for within Living Spaces that include: Public Housing, Affordable/Multifamily Housing, Privatized Military Housing, County Facilities, Jails, Nursing Homes, Courthouses, Juvenile Detention Centers, Correctional Facilities, State VA Hospital with Retirement Homes, Assisted Living or Long-Term Care, Homeless Shelters, Senior Housing, and Higher Ed Dormitories RESPONSIBILITY LEVEL: Responsible within the Living Space Vertical Market related to developing and/or oversight for all program development, program incentives and applications, energy savings, project estimating, and project scope development, overall buildability, and customer expectations. Strategizes and collaborates with the Sales and Engineering, within the area, to secure energy performance contracts are executed as presented to client, state and federal agencies. Develops and maintains Customer and Subcontractor relationships. External Relationship: The Living Spaces Energy Solutions Development Engineer II Leader is actively involved in the local contracting community, industry organizations, and networks with local subcontractors. Responsible for maintaining high customer satisfaction for projects during the execution phase. Internal Relationships: * Works collaboratively with the area team to establish and maintain national market dominance. * Assists as required to effectively plan for future resource needs and assists in allocating resource needs to meet near term commitments. * Assesses development needs and works with the Area Engineering and Installation Managers to assign Construction Managers, as needed, to provide sales support activities early in the audit process to provide input on vendor/partners selection, scope enhancements, value engineering, risk assessment etc. * Assesses Project execution needs and works with the Area engineering and Installation Manager to assist in assignment of Construction Managers, as needed, to area projects. * Assists in ensuring Fiscal Year plans are met. * Assists the Vertical Market Director in the monthly financial reporting of the Living Spaces market. How you will do it PRIMARY DUTIES: Self-performs sales support activities early in the audit process to provide input on vendor/partners selection, scope enhancements, value engineering, risk assessment etc. Understand residential multifamily market and support design related to energy efficiency and GHG reduction goals. Understands federal and state programs, project scope and customer expectations. Utilizes resource planning techniques to gain high proactivity from team members. Plans, schedules, and controls project development activities. Broad knowledge of commercial/contractual complexity/deal structure/financial acumen/disciplines of supply chain…negotiation skills…communication skills…c-level relationships Established long term customer and contractor relationships. Influences customer. Ensures that Region develops and adhere to a Project Execution Plan for each assigned project. Determines when resources will be needed from the Area Engineering and Operational Team. Determines the duration Area Construction resources will be assigned to the area. Establishes customer touch points throughout the life cycle of projects to gain feedback on customer satisfaction. Coaches’ teams on proactively addressing customer feedback. Provides leadership by demonstrating focus on exceeding customers’ expectations. Effectively communicates the status of projects to Vertical Market Director as required execution. Fosters and maintains good working relationships with subcontractors. Fosters and maintains good working relationships with JCI internal Systems, Service and Lighting partners. Ensures compliance with state, local and federal legal requirements and ensures that Energy Solutions business is conducted with the highest ethical standards. Champions and drives the BSNA Safety Program for employees and subcontractors at all levels within the area Installation organization and subcontractors. PRODUCTIVITY MEASURMENTS: The Energy Solutions Development Engineer II Leader is responsible to program funding, state and federal approvals, constructability, customer satisfaction and project execution for the Living Spaces portfolio. The following metrics define this responsibility: * Project Overall Buildability * Successful Delivery of Funding Programs * Mentoring of Regional Engineers * Maintain working relationship with State and Federal Offices What we look for Bachelor’s degree in engineering or business or equivalent work experience. Six or more years of progressively more responsible Multifamily energy engineering experience in the Engineering Industry including four or more years of direct program management experience. General understanding of HVAC, and other mechanical systems and engineering. Detailed knowledge and experience in project scope development, project risk assessment and overall project costing. High-level competence in written and verbal communication. Strong presentation skills and proficiency in speaking to large audiences. Ability to lead, manage, mentor, and inspire others. Knowledge of multiple levels with the supply chain org. Polished presentation skills, multi-faceted thinker, innovator. Strong ability to negotiate, persuade and influence. Proficient in software scheduling tools, modeling software, and applications. High level project management process competencies. Strong proficiency in MS Office (excel, word, power point), Adobe Writer, Visio, MS Project, basic windows environment, and internet business application usage. Required to have direct working knowledge of one or more of the following markets: Affordable/Multifamily Housing and Public Housing, Privatized Military Housing, County Facilities, Jails, Nursing Homes, Courthouses, Juvenile Detention Centers, Correctional Facilities, State VA Hospital with Retirement Homes, Assisted Living or Long-Term Care, Homeless Shelters, Senior Housing Higher Ed Dormitories or similar markets. Who we are Johnson Controls is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view ___. If you are an individual with a disability and you require an accommodation during the application process, please visit ___. HIRING SALARY RANGE: $85,200 - $117,200 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at

Project Manager I –Rochester, NY. – Hybrid – ID# 6702 Are you ready to make an impact in the Power industry? Join PTAG, a leading Project Management Advisory & Services firm, recognized across North America for helping world-class clients deliver major capital projects successfully. We are seeking a Project Manager I to support our growing team in Rochester, NY. In this role, you’ll play a key part in driving project excellence, collaborating with industry leaders, and ensuring high-quality outcomes across complex initiatives. About PTAG At PTAG, we help our clients plan, manage, and execute their most challenging projects with innovation, integrity, and collaboration. Our mission is to help our clients achieve successful delivery and efficient operation of their capital projects. Our vision is to support global leaders in the selection, planning, and execution of their major initiatives. Our Values Include • Safety: The safety of our employees, suppliers, and clients is always the top priority., • Collaboration: We build true partnerships with clients and service providers., • Leadership: We elevate project performance through the application of best practices., • Accountability: We take responsibility for every aspect of our engagements., • Client Satisfaction: We strive for 100% satisfaction on every project., • Integrity: We believe in open and transparent communication at all levels. Role & Responsibilities In this role, you will: • Effective leadership in a matrix organization., • Initiation, Planning, Executing, and Closing Projects — defining the project WBS, Cost Baseline and OBS structure, initiating the project, building its comprehensive work plan, controlling and managing to the risks, scope, schedule and budget, • Managing Teams — facilitating commitment and productivity, removing obstacles, and managing teams, • Implementation and Management of Quality and Environmental Process and procedures on all projects focusing on meeting SPI and CPI performance indicators less than 1.0, • Management of third-party projects including other transmission Customers and interconnecting customers, • Accountable and Responsible for:, • Cost /Budgeting and Management, • Communication Management, • Change Management, • Schedule Management, • Construction Management Oversight, • Commissioning Management Oversight, • Risk Management, • Regulatory and Stakeholder Management To succeed in this role, you bring: • 5-10 years in large scale projects Program Management for Utility business,, • Bachelor's degree is required., • Professional Engineer License and/or Project Management Professional (PMP) Certification., • Proficient in Microsoft Project, Excel, PowerPoint, and Word., • Project Management Professional or Program Management Professional, • Minimum five (5) years' experience in the functional area under which it will be contracted: Substations, T&D, Gas-Hydro, and OSG., • Exposure to industry-leading clients and partners., • Competitive compensation and comprehensive benefits package., • Flexible work environment and opportunities for advancement., • Employee Share Purchase Plan (ESPP)., • A culture that values safety, accountability, and excellence. Salary Range for Role $ 130,000 - $135,000 Compensation at PTAG varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set and level of experience. Why Join PTAG? At PTAG, you’ll be part of a dynamic, growing consulting firm that values professional development, collaboration, and innovation. Opportunity to work on major infrastructure and capital projects. • Exposure to industry-leading clients and partners., • Competitive compensation and comprehensive benefits package., • Flexible work environment and opportunities for advancement., • Employee Share Purchase Plan (ESPP)., • A culture that values safety, accountability, and excellence. PTAG is proud to be an equal opportunity employer committed to fostering a diverse and inclusive workplace. PTAG uses AI-enabled tools to support certain aspects of the recruitment process, including reviewing applications against job-related criteria. These tools are used to assist our recruiters. All hiring decisions are made by PTAG recruiters and hiring managers.

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. The Role At QuidelOrtho, we're advancing the power of diagnostics for a healthier future for all. Join our mission as our next Senior Software Engineer - (Database and Applications) to join our R&D Instrument Platforms organization and provide technical leadership in developing features and applications within our portfolio of products while having a primary focus on database schema design and implementation. This is an opportunity to shape core architecture and influence the development of safety-critical systems. Responsibilities span the full lifecycle, including requirements, design, implementation, and testing of database and middleware components. This position is onsite in Rochester, NY. Note: This position is not currently eligible for visa sponsorship. The Responsibilities • Design and implement modular middleware components for Linux-based device software systems using modern C++ (C++20/23)., • Architect and implement relational database schema and ensure data integrity across distributed systems., • Act as Software SME in design discussions with Product, • Managers and Systems Engineers to define requirements., • Define system architecture and development processes to ensure long-term maintainability and traceability within a regulated quality management system., • Conduct feasibility analysis and develop proof-of-concepts for middleware solutions., • Contribute to system-wide synchronization, logging, and monitoring infrastructure for observability., • Enforce memory-safe design practices throughout requirement gathering, architecture definition, unit testing, and code reviews., • Develop integration test frameworks for multi-process Linux environments, • Perform other work-related duties as assigned. The Individual Required: • B.S. or M.S. Degree in Computer Science, Computer Engineering or a related discipline required., • Minimum of 5 years required with bachelor's or 3 years with master's degree, preferably leading in a medical device environment or equivalent combination of education and experience., • Expertise in relational database schema design and implementation (PostgreSQL preferred)., • Performance tuning: query optimization, indexing strategies, and capacity planning, • Database migration and version control, • Backup, recovery, and disaster recovery planning, • Proficiency in Modern C++ (C++11 minimum, C++20 or newer preferred) with a strong understanding of memory management thread-safety, this is not a web or front-end development position., • Familiarity with Agile development practices and toolchains, including Git, CI/CD integration, and issue tracking platforms such as Jira, GitHub, or Azure DevOps., • Strong analytical and debugging skills with a systematic approach to solving complex technical issues. Ability to travel 5% or less, domestically. Preferred: • Embedded systems development, including Linux or RTOS., • Design and integration of modular, maintainable software interfaces using Interface Definition Languages (IDLs), versioned APIs (e.g., REST), event-driven or pub/sub architectures, and schema validation (e.g., JSON Schema, XSD) to support cross-language and backend-to-UI interoperability., • Experience or working knowledge of the Rust programming language., • Familiarity with scripting languages such as Python and Bash for automation and tooling., • Proficiency in modern cross-platform software design using contemporary build systems (e.g., CMake, etc.)., • Designing testable architectures and developing deterministic test cases using automated testing frameworks, including mocking, emulation, and simulation tools for Linux-based device software systems. The Key Working Relationships Internal Partners: • Software development partners and suppliers. The Work Environment This role is based at our beautiful waterfront campus with walking trail, fitness center, and full-service onsite cafeteria in the Rochester, NY region. The work environment characteristics are representative of a manufacturing, laboratory, or warehouse environment. Up to 60% of the time at desk, standing or sitting extended periods of time. Flexible work hours to meet project deadlines Physical Demands Must be able to work at desk, standing or sitting for extended periods of time. Other physical demands include bending, kneeling, talking, hearing, and vision. Salary Transparency The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The salary range for this position is $100,000 to $120,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time), and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. Equal Opportunity QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform the duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___. #LI-TO1

IMEG is seeking a Senior Mechanical Engineer specializing in HVAC, plumbing, and fire protection systems to join our Mechanical team in Rochester, New York. In this role, you will lead the design and delivery of large, complex building projects, providing project management, engineering analysis, and implementation oversight. You'll collaborate with multidisciplinary teams, mentor junior staff, and ensure technical excellence for clients in the vertical building industry. Advance your career by driving innovative mechanical solutions and shaping resilient, high-performance environments with a national leader in engineering. Principal Responsibilities • Lead design efforts for HVAC, plumbing, and fire protection systems, utilizing engineering software and tools to create detailed designs, specifications, and calculations per code and IMEG standards., • Perform site assessments and generate detailed analysis and technical reports., • Interact with clients to gather requirements, communicate technical information, and build strong relationships., • Provide in-process design reviews and implement IMEG quality control processes to ensure compliance with industry and client standards., • Mentor and train team members, offering technical assistance and resolving field issues with minimal senior support., • Stay current with industry trends, emerging technologies, and best practices; contribute to research and innovation within IMEG., • Prioritize safety in all engineering work, identifying and mitigating potential risks., • Collaborate with engineers, architects, and project managers to deliver integrated solutions., • Participate in project interviews and presentations. Required Qualifications and Skills • Bachelor of Science (BS) Degree in Mechanical Engineering, or equivalent, required, • Professional Engineer (PE) License required, • 10 years of experience minimum required, 12 preferred, in the building design consulting industry, • Mastery of design techniques, tools, and concepts involved in the production of technical plans and specifications, • Mastery of technical and analytical skills including proficiency of principles in thermodynamics, psychrometrics, heat transfer and fluid mechanics relating to mechanical design in HVAC, plumbing and fire protection systems, • Strong training, mentoring and leadership skills, • Ability to perform final quality control check in their area of expertise, • Ability to sell work and develop client relationships, • Excellent communication and interpersonal skills; ability to clearly communicate in both oral and written communication to individuals or groups, • Ability to work collaboratively in a team environment, • Attention to detail and problem-solving skills, • Eagerness to adapt to new challenges, • Proficient with MS Office Suite including but not limited to Word, Excel, and Outlook, • Ability to travel up to 20% with occasional overnight stays This position is not eligible for sponsorship. Why Join Us IMEG puts people first-with a strong focus on career growth, work-life balance, and meaningful impact. As a 100% employee-owned firm, we offer the resources of a national design leader with the close-knit culture of a local office. You'll collaborate across disciplines, contribute to innovative, sustainable projects, and shape the communities we serve. Join a team where your ideas are valued, your development is supported, and your work truly matters. Work with advanced mechanical design tools, contribute to high-profile projects, and help drive sustainable solutions across New York. Mechanical Team Highlights • Expertise in designing high-performance HVAC, plumbing, and fire protection systems for diverse building types., • Strong focus on sustainable and energy-efficient solutions., • Collaborative environment with opportunities for mentorship and professional growth., • Access to cutting-edge engineering tools and resources., • Proven track record of delivering complex projects on time and within budget. Locations available: Rochester, NY or Buffalo, NY State of New York Salary Range: $112,000 - $170,000 Minimums and maximums may vary based on location. Individual pay will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Other rewards may include annual bonuses and stock ownership options. In addition, IMEG Corp. provides a variety of benefits to employees, including health insurance coverage, an employee wellness program, life and disability insurance, a retirement savings plan, paid holidays, and paid time off (PTO). This information is being provided in compliance with local laws. Additional information regarding employee benefits may be found on our company website at___ Apply today to help shape the future of mechanical engineering with IMEG. IMEG, an employee-owned corporation, is committed to investing in employees' futures through professional development programs and opportunities for career advancement. We offer a comprehensive benefits package including generous PTO, flexible schedule, and assistance with tuition reimbursement. Additionally, employees are eligible to enroll in health, dental, vision, and life insurance on their first day of employment. Want to learn more about IMEG and our other amazing career opportunities? Please visit ___. IMEG is committed to providing equal employment opportunities in all employment practices, without regard torace, color, religion, sex (including sexual orientation or gender identity), gender, national origin, disability, age, genetic information(including family medical history), parental status (including pregnancy, childbirth or related medical conditions includinglactation), ethnic origin, hair type (including hairstyle or hair texture), citizenship status, marital status, military service, veteran'sstatus, political affiliation, non-merit-based factors, or any other characteristic protected by law. In accordance with antidiscrimination law, it is the purpose of this policy to put into effect these principles and mandates. IMEG prohibitsdiscrimination and harassment of any type. IMEG conforms to the spirit as well as to the letter of all applicable laws andregulations. All applicants have the right to request access, correction, and deletion of their personal information from our system. In order to make a request, please email .

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. The Role At QuidelOrtho, we're advancing the power of diagnostics for a healthier future for all. Join our mission as our next Senior Software Engineer - Linux C++ to join our R&D Instrument Platforms organization and provide technical leadership in developing features and applications within our portfolio of products. This role focuses on Linux-based device software, real-time control, inter-process communication, and deterministic scheduling implemented in modern C++ (C++20/23) with memory-safe practices. This is an opportunity to shape core architecture and influence the development of safety-critical systems. Responsibilities span the full lifecycle, including requirements, design, implementation, and testing. This position is onsite in Rochester, NY. Note: This position is not currently eligible for visa sponsorship. The Responsibilities • Design and implement modular middleware components for Linux-based device software systems using modern C++ (C++20/23)., • Act as Software SME in design discussions with Product Managers and Systems Engineers to define requirements., • Define system architecture and development processes to ensure long-term maintainability and traceability within a regulated quality management system., • Conduct feasibility analysis and develop proof-of-concepts for middleware solutions., • Contribute to system-wide synchronization, logging, and monitoring infrastructure for observability., • Enforce memory-safe design practices throughout requirement gathering, architecture definition, unit testing, and code reviews., • Develop integration test frameworks for multi-process Linux service environments, • Perform other work-related duties as assigned. The Individual Required: • Minimum of 5 years required with bachelor's or 3 years with master's degree, preferably leading in a medical device environment or equivalent combination of education and experience., • Proficiency in Modern C++ (C++11 minimum, C++20 or newer preferred) with a strong understanding of memory management thread-safety, this is not a web or front-end development position., • Familiarity with Agile development practices and toolchains, including Git, CI/CD integration, and issue tracking platforms such as Jira, GitHub, or Azure DevOps., • Experience developing and testing software for resource-constrained environments, including real-time applications and/or robotic systems., • Strong analytical and debugging skills with a systematic approach to solving complex technical issues., • Experience with automated testing frameworks such as GTest, PyTest, or similar, including test mocking, emulation, and simulation tools for Linux-based device software systems., • Ability to travel 5% or less, domestically. Preferred: • Embedded systems development, including Linux or RTOS., • Design and integration of modular, maintainable software interfaces using Interface Definition Languages (IDLs), versioned APIs (e.g., REST), event-driven or pub/sub architectures, and schema validation (e.g., JSON Schema, XSD) to support cross-language and backend-to-UI interoperability., • Experience or working knowledge of the Rust programming language., • Familiarity with scripting languages such as Python and Bash for automation and tooling., • Proficiency in modern cross-platform software design using contemporary build systems (e.g., CMake, etc.)., • Designing testable architectures and developing deterministic test cases using automated testing frameworks, including mocking, emulation, and simulation tools for Linux-based device software systems. The Key Working Relationships Internal Partners: • Software development partners and suppliers. The Work Environment This role is based at our beautiful waterfront campus with walking trail, fitness center, and full-service onsite cafeteria in the Rochester, NY region. The work environment characteristics are representative of a manufacturing, laboratory, or warehouse environment. Up to 60% of the time at desk, standing or sitting extended periods of time. Flexible work hours to meet project deadlines Physical Demands Must be able to work at desk, standing or sitting for extended periods of time. Other physical demands include bending, kneeling, talking, hearing, and vision. Salary Transparency The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The salary range for this position is $100,000 to $120,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time), and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. Equal Opportunity QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform the duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___. #LI-TO1

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. The Role At QuidelOrtho, we're advancing the power of diagnostics for a healthier future for all. Join our mission as our next Staff Systems Engineer for in vitro diagnostic instrument development who will provide technical leadership and contribution to product design for QuidelOrtho's instrument platforms. Our Staff System Engineers have extensive experience and expertise in the field of systems engineering. They possess in-depth knowledge of systems engineering principles, processes, tools, and are often involved in high-level planning, integration, and optimization of complex systems. This role requires advanced problem-solving skills, the ability to lead a smaller team on large-scale projects, and a commitment to ongoing professional development. Additional responsibilities may include management of large technical projects or processes that span outside the immediate job area. Work is performed with limited oversight. This position is onsite full-time in Rochester, NY. Note: This position is not currently eligible for visa sponsorship. The Responsibilities • Gather, analyze, and manage system requirements, ensuring alignment with regulatory standards and customer needs, • Conduct risk analysis and mitigation strategies, including Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA)., • Lead formal design reviews; provide system-level perspective and ensure compliance with design controls., • Drive instrument development by creating a plan of execution using knowledge and ability to derive unique solutions and approaches, which are cost effective and contribute to the success of the project., • Utilize modeling, simulation, and data analytics to assess system behavior and optimize design performance., • Diagnose and resolve system-level issues, ensuring timely delivery of solutions. Use system engineering tools to carry out Root Cause Investigations and determine corrective and preventative action plans., • Provide status updates as needed to senior leadership, highlighting progress, risks, and mitigation plans., • Responsible for making moderate to significant improvements of processes, systems or products to enhance performance of technical job area., • Apply Six Sigma methodologies to identify, analyze, and improve processes within the development and manufacturing of medical devices., • Develop and execute system level test plans and protocols to validate system performance, reliability growth, and safety., • Conduct statistical analysis to determine appropriate sample sizes for verification and validation activities, ensuring robust and reliable results., • Collaborate with key stakeholders and external design partners to deliver product features that improve our customer experience, product performance and safety., • Perform other work-related duties as assigned. The Individual Required: • Bachelor's Degree in System Engineering, Biomedical Engineering, or related engineering field with strong cross-discipline experience is required, master's degree preferred., • Minimum 8+ years relevant experience required with a track record of delivering products in the medical, automotive, and/or defense industries, preferably with relevant medical device design exposure., • Demonstrated experience using Six Sigma tools and techniques for process optimization and quality improvement, • Demonstrated experience in applying statistical techniques to real-world problems, particularly in the medical device industry., • Demonstrated experience in systems engineering tools and methodologies, as well as experience with software development, hardware design, reliability growth testing and systems integration., • Strong verbal and written communication skills, with the ability to convey complex technical information to diverse audiences., • Ability to work effectively in a collaborative, cross-functional team environment. Including the mentoring of more junior engineers., • Strong analytical and problem-solving skills, with a focus on delivering innovative solutions., • Must have strong customer focus to ensure that the experience delivered by the product is consistent with expectations., • Results orientation: Must be capable of making commitments, setting priorities, and delivering results in time and on budget in a highly regulated environment., • Situational Adaptability: Sees ahead clearly; can anticipate future concerns., • Develops and maintains effective cross functional relationships and is capable of quickly earning trust and respect., • Must have the ability to travel 10% both domestic and international. Preferred: • Familiarity with medical device regulations and standards (e.g., FDA, ISO 13485, etc.), • Demonstrated experience in successfully working with external development partners in delivering complex solutions., • Familiarity with Clinical Chemistry and/or Immunohematology in vitro diagnostic instruments. The Key Working Relationships Internal Partners: • Clinical chemistry and transfusion medicine personnel (current and potential customers), • Development partners The Work Environment The work environment characteristics are representative of an office setting, though occasional light lifting of files and related materials is required. 30% of time in meetings, working with team, or talking on the phone, 70% of the time at the desk on computer, doing analytical work. Intermittently time is spent in a manufacturing or laboratory environment and include potentially hazardous chemicals, as well as infectious or potentially infectious bodily fluids, tissues, and samples. Occasional travel, domestically and internationally. Flexible work hours to meet project deadlines Physical Demands No strenuous physical activity required. Occasional light lifting of materials may be needed. Substantial time will be spent in virtual or in-person meetings, engaging with customers, and working on scientific content and documentation. Salary Transparency The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The salary range for this position is $125,000 to $135,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time), and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. Equal Opportunity QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform the duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___. #LI-TO1

___ Description At American Packaging Corporation (APC), you'll find the packaging career you've been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC's longstanding success is fueled from the inside out. We're constantly seeking to improve our internal operations and were named a "Best of the Best" in the Best workplaces in the America's awards for 12 years in a row. It's how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Provide engineering duties as assigned by Plant Engineer and/or Plant Manager. Responsible for overseeing new equipment installations as well as modifications to existing equipment as assigned by Plant Engineer. Maintain PLC, HMI, and Drive programming software. Provide detail drawings of parts that need to be manufactured in our shop or by an outside machine shop. Oversee plant engineering duties in the Plant Engineer's absence. Troubleshoot and repair equipment problems that effect productivity of the manufacturing group. Be involved with process improvements providing input in production problem solving. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Providing detail drawings., • Active in troubleshooting electrical, electronic, and mechanical problems in a manufacturing environment., • Well versed in PLC and HMI programming., • Well versed in digital and analog AC/DC drive design, programming and installation., • Well versed in computer (PC) fundamentals, including communication protocols, Microsoft Operating systems and Microsoft Office software., • Manage new equipment installations and startups., • Design, install and startup equipment modifications., • Negotiate price and purchase equipment and services as needed., • Draft capital expenditure requisitions - gather information for justification of capital, obtain cost of capital items., • Fill out project item listings., • Provide managerial input to the maintenance department as well as outside contractors., • A fundamental understanding of regulations including OSHA, NFPA, NEC, EPA, and WDNR., • Responsible for working safely and being a safety leader. Directly supervises employees in the Maintenance Department in the absence of the Maintenance Manager. Carries out supervisory responsibilities as necessary in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE: A bachelor's degree, Associate's degree, or equivalent in a related field is required. An additional year of relevant full-time experience and/or training is preferred. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as Ohm's Law, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to sit and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and hear, taste or smell. This position may require manual lifting not to exceed 50 lbs - reference your department-specific JHA (job hazard analysis) for departmental lifting restrictions. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: . Salary Description $80,000 - $115,000/year

Division: New York North Project Location(s): Rochester, NY 14642 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt The salary range for this position is estimated to be 99,000.00 - 148,000.00 USD annualized. Position Description: Leads, directs and coordinates the work of subcontractors and/or Turner trade labor with regard to the Mechanical and Electrical systems included in the project. Responsible for ensuring safety, schedule delivery, quality of work performed and adherence to budget of the project. The Superintendent Mechanical-Electrical has supervisory responsibility for Assistant Superintendents, Field Engineers, Interns and trade labor in his/her area of responsibility. Reports to: Project Superintendent, Project Manager or MEP Manager Essential Duties & Responsibilities*: Specifically relating to the mechanical and/or electrical systems (e.g. HVAC, Plumbing, Electrical, Low Voltage, Fire Sprinkler): • Managing and making decisions related to the performance of work related to scheduling, delivery, logistics, quality control and trade employee staffing levels., • Managint work among assigned trades to promote a coordinated project operation. Resolving local area problems regarding procedures, precedence, design clarifications, adequate labor and equipment, schedule and all other appropriate matters., • Managing the overall site safety program as required and ensuring subcontractor compliance with Turner standards and all applicable safety codes and regulations., • Supervising and developing Assistant Superintendents, Field Engineers and/or interns, as assigned, including providing input on or completing performance appraisals., • Ensure strict adherence to ethics and compliance requirements at all times., • Creating schedules and determining sequencing of work. Developing and implementing recovery strategies to maintain project schedule and budget., • Communicating with owners and architects/engineers in connection with field issues. Investigating and resolving such issues., • Managing the billing process as it relates to work in place and overseeing the monthly estimate of work completed, payrolls, material invoices and subcontractor payment applications., • Managing the work to ensure that it is installed in compliance with and conforms to the approved contract documents., • Working with the Engineer on the coordination effort for all mechanical and electrical systems, equipment and piping layouts for all trades on a master coordination set of drawings and 3D model securing the approval of the architects and engineers., • Leading project inspections, startup, commissioning, turnover and training process, and punchlist required for acceptance and handover of all the systems., • Coordinating, directing, and monitoring the activities of subcontractors and suppliers, to insure conformance with plans, specifications, local and national codes., • Reviewing project changes in conjunction with the Project Engineer., • Keeping detailed daily records of MEPS trade contractors' work progress. This is not a remote/hybrid position and will be based in a Turner office or project location. Qualifications: Bachelor's degree or at least four years of formal engineering or architectural experience and a minimum of six years of mechanical/electrical/plumbing construction experience required, or an equivalent combination of education, training and/or experience. Knowledge of building construction, means and methods, scheduling and cost control procedures, general contract, general conditions, subcontract documents, drawings and specifications. Specific knowledge of Mechanical and Electrical Systems. Thorough knowledge of building information modeling and its use in coordination of the Mechanical and Electrical systems and other project systems. Proven written and verbal communication abilities; proficiency with computer applications, including Microsoft Office suite. Ability to read, understand and interpret contract documents, drawings, specifications, scopes of work and project schedule. Demonstrated leadership and interpersonal skills. Physical Demands: Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires useof hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 75 pounds. Work Environment: While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. *May perform other duties as assigned. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Job Description Title Quality Engineer Department Quality Reports to Director, Quality & Product Assurance SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area and departmental quality functions. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services. · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis. · Clean, inspect and evaluate assigned product(s) to specifications and requirements. · Lead and participate in internal audits. · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers. · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval. · Perform / coordinate environmental, durability, reliability and other testing as needed. · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages. · Work with Supply Chain to improve and control RPO supply base. · Issue, manage, validate and close CAPAs. · Create, manage and participate in ECOs. · Implement and manage RPO document control system. · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required. · Identifies and recommend improvement opportunities. · Engage in quality improvement assigned projects. · Other duties as assigned You have: · Associate’s degree required in Quality, Engineering, Engineering Technology, or a closely related technical discipline. · Bachelor’s degree strongly preferred, particularly in Engineering, Quality, or Applied Sciences. · Minimum of 5 years of progressive, hands‑on quality experience within manufacturing, optical, aerospace, or precision‑engineering industries. · Demonstrated track record of increasing responsibility in quality systems, process control, or product assurance. · ASQ certifications (CQE, CQA, CQT, CSSGB, etc.) are highly advantageous. · Proficiency with quality inspection equipment and inspection methodologies. · Strong computer skills, including Microsoft Office; Minitab preferred. · Ability to interpret optical and mechanical drawings, engineering standards, and technical specifications. · Working knowledge of ISO 9001, AS9100, AS9102, MIL‑STD‑810, MIL‑PRF‑13830, ISO 10110, and other relevant industry standards. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, and related quality methodologies. · Experience with environmental and performance test equipment, including thermal, salt, and humidity chambers. · Familiarity with government property control requirements. You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands and fingers to handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch, • The job may involve prolonged periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required in specific areas., • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: • · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • · Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • · Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • · Balance: 11 paid holidays, generous paid vacation and sick time, • · Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday, 7am - 3:30pm

Job Description Job Summary: The CNC Programmer is responsible for driving improvements in the performance and capabilities of our precision machining operations that include CNC Milling and Turning equipment. They will lead focused projects to optimize cycle times, improve yields, increase machine efficiencies, and introduce new products into the factory. They will also support the manufacturing operations to deliver quality products on-time to customers. Essential Duties and Responsibilities: • Process development, machine programming, and prototype development work., • Provide technical support to machinists and operators to ensure smooth production runs., • Troubleshooting of equipment issues and resolution of problems related to tooling, setup, and machine performance., • Use CAD and CAM software to create part models, toolpaths, and detailed machining instructions for CNC machines., • Consulting with Chief Manufacturing Engineer, Program Management, Quality, and Engineering regarding part quality requirements and to ensure that designs are manufacturable and meet tolerance requirements., • Consulting with customers and internal applications engineering regarding current projects and upcoming projects., • Participate in strategic improvement events focused on improving throughput, profit margins, and overall manufacturing efficiency., • Lead Quality improvement efforts for assigned work areas / programs., • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to operate machinery and tools., • The employee may be required to lift up to 50 pounds occasionally., • The work environment includes exposure to noise from machinery and a variety of physical demands, including the use of precision instruments., • Protective equipment such as safety goggles, hearing protection and other safety equipment required to perform the job effectively and in a safe manor., • Bachelor’s of Engineering Degree from a four year college or >5 years related work experience in cnc programming, • Relevant certifications (i.e. MasterCam programming) highly desired., • Hands-on experience with CNC machines, milling machines, lathes, grinders, and other precision machining equipment. Expertise with horizontal and vertical 5 axis milling as well as multi axis turning and mill turn is a must., • Experience using precision measurement instruments (e.g. micrometers, calipers, height gauges, CMM machines), • Solid knowledge of manufacturing quality control processes and standards., • Ability to work independently and in teams in a fast-paced, high-tech environment., • Excellent communication and interpersonal skills aligned with our Mission-Vision-Values., • Proficient in Microsoft Office Suite (Excel, Word, Outlook) and other relevant software for managing production and performance metrics.

Job DescriptionDescription: Position Summary The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities • Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements., • Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste., • Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges., • Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation., • Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities., • Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in Engineering preferred., • Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred., • Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker., • Knowledge of CNC manufacturing equipment and quality assurance methodologies., • Skilled in Microsoft Office Suite and experienced with ERP systems., • Strong project management, problem-solving, and multitasking capabilities., • Demonstrated commitment to maintaining health and safety standards., • Able to work both independently and collaboratively within a team environment. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job DescriptionManufacturing Engineers (Process, Controls, Continuous Improvement) Multiple U.S. Locations | Onsite & Hybrid Opportunities $90K – $160K+ (higher for senior/specialized talent) Build What Powers Industry. Engineer What Scales. Northwest Talent Solutions is actively building a national network of high-performing Manufacturing Engineers to support current and upcoming opportunities across leading organizations in: • Advanced Manufacturing, • Building Materials, • Automotive & Industrial Equipment, • Optimize manufacturing processes to improve yield, throughput, and cost efficiency, • Lead continuous improvement initiatives (Lean, Six Sigma, Kaizen), • Design, implement, and troubleshoot automated systems and production lines, • Partner with operations, maintenance, and leadership to drive plant performance, • Support capital projects, including equipment upgrades and new line installations, • Analyze production data to identify and eliminate bottlenecks and waste, • Ensure compliance with safety, quality, and regulatory standardsWe're Looking For Engineers With Experience In, • Manufacturing / Process Engineering, • Controls Engineering (PLC, HMI, SCADA), • Industrial / Production Engineering, • Continuous Improvement (Lean / Six Sigma), • Maintenance & Reliability Engineering Core Qualifications:, • Bachelor's degree in Engineering (Mechanical, Electrical, Industrial, or related), • 3–10+ years of experience in a manufacturing environment, • Experience with:, • Process optimization and production support, • Root cause analysis and problem-solving, • Lean / Six Sigma methodologies, • Strong ability to work cross-functionally in fast-paced production environments Highly Desired Skills:, • PLC programming (Allen-Bradley, Siemens, etc.), • Experience with automation, robotics, or controls systems, • Capital project leadership experience, • Six Sigma certification (Green Belt / Black Belt), • Experience in high-volume or continuous manufacturing environments Compensation:, • $90K – $160K+ base salary, • Higher for:, • Controls / automation expertise, • Multi-site or capital project leadership, • Specialized industry experience, • Midwest: Ohio, Indiana, Michigan, Wisconsin, • Southeast: Tennessee, Georgia, Alabama, South Carolina, • Texas & Gulf Coast: Houston, Dallas, Baton Rouge, • Mountain West: Colorado, Utah, • Access to multiple active and upcoming roles—not just one opportunity, • We match you based on skillset, goals, and location preference, • Deep specialization in manufacturing and technical recruiting, • Fast, transparent communication and real-time market insight Even if you're not actively looking, we welcome the opportunity to connect and keep you informed of relevant opportunities as they arise. #ManufacturingEngineer #ProcessEngineer #ControlsEngineer #IndustrialEngineering #LeanManufacturing #SixSigma #Automation #PLC #ContinuousImprovement #EngineeringJobs #NowHiring #OperationsExcellence #SmartManufacturing #NWTS

Job DescriptionCompany Description TOMRA Food is a multinational organization and a leading provider of sensor-based sorting, peeling and integrated post-harvest solution for the food industry. Transforming global food production to maximize food safety and minimize food loss by making sure Every Resource Counts™, has been our strength for over 50 years. At TOMRA, we want people to innovate, show passion in their work and be responsible. We encourage the freedom to innovate and take risks that result in breakthroughs that challenge the status quo. We value passion that focuses and commits to meeting success. We believe in a responsible and safe mindset that takes care of our customers, products, and fellow employees. Job Description The Field Service Engineer is responsible for delivering exceptional technical support, maintenance, installation, and customer training services for TOMRA's cutting-edge food sorting equipment. This role aims to ensure the seamless operation of TOMRA's solutions, maximize equipment performance and enhance customer satisfaction. Primary Job Functions • Perform field service work at customer sites which includes installation, commissioning, testing, integration, optimization, maintenance and repair, ensuring full functionality according to machine specifications., • Perform all mechanical, electrical, electronic and optical tuning and setup., • Analyze, evaluate and diagnose equipment; troubleshooting machine problems through to resolution., • Perform preventative maintenance including preseason service, postseason service and enhancing ongoing performance of machines., • React in a prompt and professional manner to customer machine issues in the field. Where an easy fix is not possible, ensure customer is well informed of the next steps and potential costs., • Address customer complaints and if necessary, escalate to appropriate stakeholders., • Maintain close relationships and work collaboratively with engineering, research & development, sales, customer solution delivery and other internal stakeholders for continuous improvement activities, to advise on any potential sales opportunities and to successfully complete projects. Contribution and collaboration is vital whether its research and development site testing, refurbishment, refitting, upgrades or new installs, all projects require teamwork., • Act as the voice of the customer in the value chain to improve products systems and services, by reporting on feedback and comments received in the field leadership, research and development, or sales., • Assist with training and development of new Field Service Engineers, as requested., • Instruct and train customers on operation of machine, utilization and required maintenance of the systems., • Manage and control tools, test equipment, technical documentation and other assigned equipment., • Embrace related assignments and responsibilities as required to contribute to the overall success of the team., • Promote a “Safety First” culture throughout the company, our customers, and our industry.Qualifications Required: • An Associate's degree in electrical, electronic, automation, mechanical, mechatronics, sustainable manufacturing, or industrial engineering is preferred or combination education and equivalent experience is accepted., • Relevant knowledge of electronics/electrical assembly and wiring., • Strong understanding / knowledge of electronics and electrical assembly and wiring., • Proven to read, analyze and interpret technical procedures and/or governmental regulations., • Assist and support customers in a professional manner, • Ability to establish and maintain effective working relationships with customers, internal and external associates and management, • Excellent communication skills and the ability to deal effectively with customers in the English language as necessary., • Competent with Microsoft Office – Word, Excel and Outlook, • Two plus years’ experience in field service and customer support., • Two plus years’ experience in PC building, repairing and diagnostic testing., • Two plus years’ experience in installing software on PC’s., • Experience with packaging and or printing machinery a plus, • Experience engaging with customers in a service delivery environment, • Experience in electronic system troubleshooting a plus., • Working knowledge of basic analog and digital circuits, electrical power circuits, PLC circuits., • Working knowledge of basic test equipment such as oscilloscopes and voltmeters., • Knowledge of computer hardware and configurations., • Ability to work in Food processing plants, farms, cold storage facilities, and outside in high/low temperatures., • Willing to travel for at least 70% of the time, domestic and internation travel based on a flexible schedule; includes weekends and/or holiday travels., • Ability to drive without restrictions in residency country. Additional Information Pay Band For U.S. applicants, in accordance with applicable disclosure requirements, the anticipated annual base pay range for the Field Service Engineer position is $25.67 to $32.46. The actual salary offer will carefully consider a wide range of factors, including your skills, qualifications, experience and location. Also, certain positions are eligible for additional forms of compensation such as bonuses. Why work for us: Be part of a mission to transform how we all obtain, use and reuse the planet’s resources to enable a world without waste. We love innovation, a collaborative environment where idea sharing and thinking outside the box is encouraged. What we offer: • Comprehensive medical, dental, and vision plans with 100% employee premium coverage, • 31 days of PTO annually (vacation, sick, and holidays), increasing with tenure, • 401(k) with 100% match on the first 4% of your contributions, • 8 weeks of fully paid parental leave for eligible employees, • Up to 4 days of paid bereavement leave to support employees during personal loss, • Employee Assistance Program supporting mental, emotional, and financial well-being, • Inclusive culture that values diversity, well-being, and teamwork TOMRA is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines.

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. About the Role: This role is responsible for managing day‑to‑day quality control activities to ensure product conformance, process capability, and compliance with customer and quality system requirements. The position oversees quality documentation, PPAPs, inspections, corrective actions, and the supervision and training of Quality Inspectors, while serving as a key liaison with suppliers and customers on quality issues. Success in this role requires strong technical quality expertise, attention to detail, and the ability to proactively drive problem resolution and continuous improvement across assigned products and processes. What You’ll Be Doing: • Responsible for adhering to and maintaining all quality system procedures and requirements related to the position., • Must adhere to all safety rules and company policies, as well as enforce the compliance and implementation of each through subordinates., • Attendance/punctuality is consistently at work and on time; ensures that the Attendance Policy is enforced consistently through subordinates., • Maintain Quality Control documentation to include:, • Inspection Plans, • Product history, • Control Plan, • Process Flow Diagrams, • Sample locations, • Blueprints, • Quality Alerts, • PPAPs, • NCMRs, • Customer claims (Local management tool and customer portal(s)), • Reviews and dispositions supplier PPAP submissions including generation of receiving inspection sampling plan as required. Approves Supplier 8Ds., • Defining and maintaining control plans and inspections plans as agreed with customer., • Administers training program including testing and gaging for hourly personnel., • Supervision and training of Quality Inspectors as required., • Develop and initiate standards and methods for inspection, testing, and evaluation., • Kick off tool repair/improvement activities as required, • Receive and coordinate the resolution of customer complaints, 8D completion on customer portal and internal problem-solving tool, based on customer timing, • Devise sampling procedures and designs and develop forms, inspection plans and instructions for recording, evaluating, and reporting quality data., • Leads management of suspect / discrepant materials, including Quality alerts, NCMR management, MRB reviews, sort/rework instructions and internal claim management., • Manage PPAPs, submission and approval on time, • Management of boundary, master and PPAP parts, • Asure capability for their assigned parts and processes, • Assure product conformance by validation of parts and approval of any process change., • Participates in audits as required, as auditee or auditor We would love to hear from you if: Education and/or Experience: Bachelor's degree (B. A.) from four-year college or university; or two to four years related experience and/or training in similar position in the Automotive sector; or equivalent combination of education and experience; GD&T knowledge, SPC knowledge, core tools Computer Skills: Proficient with Microsoft Office Suite 365; Minitab; Ability to learn new software as needed. Why You’ll Love Working for Century Mold: • We reward our employees. The salary range for this position is market competitive and is based on relevant years of experience and skills., • We care about our employee’s well-being. In addition to direct compensation, we also offer a robust array of benefits to our employees; these include medical insurance, dental, vision, life insurance, as well as other great benefits to support your well-being. We also support our employees by offering 401(k) matching. The details of your position: Your Job Title will be: Quality Engineer Belonging to the: Quality Control Department You will report directly to: Plant Quality Manager Your Employment Status: Exempt Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job Description About the Role: The Industrial Engineer position comprises of a balance of technical expertise in data/metric analysis with a strategic drive to create value through process improvements, cost reduction and product improvement. The Industrial Engineer is instrumental in achieving operational excellence through innovation, development, evaluation, and implementation of superior methods and systems. The Industrial Engineer will partner with leadership throughout the organization to understand their business needs and put them in the best position for success by delivering robust continuous improvement plans. What You’ll Be Doing: • Lead the identification, evaluation, and implementation of automation opportunities across molding, assembly, machining, material handling, and secondary operations to improve safety, throughput, and cost competitiveness, • Act as a change agent for digital transformation, promoting a data-driven culture and training teams on new automated and connected manufacturing technologies, • Serve as the plant technical owner for Industry 4.0 initiatives, including data connectivity, machine monitoring, and digital workflows that enable real-time visibility into production performance, • Partner with Operations, Maintenance, IT, and Quality to integrate equipment, sensors, and control systems with existing manufacturing execution, maintenance, and reporting platforms, • Develop and standardize digital work instructions, automated data capture, and electronic production reporting to reduce manual inputs and improve data accuracy, • Support capital investment planning by building automation business cases, including ROI analysis, payback modeling, and risk assessment, • Drive continuous improvement through the use of manufacturing data analytics, identifying trends, constraints, and opportunities for process optimization, • Support new program launches by ensuring automation readiness, scalable cell design, and alignment with future-state manufacturing strategy, • Work closely with Finance to maintain BOM system, including the creation of new BOMs and revision of current BOMs., • Develop and implement Machine Operator Training Program., • Initiate, update and maintain Machine Operator work instructions on a daily basis., • Work actively on continuous improvement projects that involve the entire organization such as Kaizen, 5S, Lean Manufacturing and Visual Recorder., • Work with Manufacturing and all other facets of the organization to improve all ergonomic conditions on presses and machinery, while anticipating/evaluating hazardous conditions by identifying them prior to accident occurrence., • Coordinate Safety initiatives and lead Company to resolution on environmental, health and safety issues., • Provide guidance for packaging engineering methods and standards on a daily basis. Work with customers to define standard packs and returnable packaging. Work with customers to define and develop alternative packaging. We would love to hear from you if: • Bachelor’s Degree (B.A./B.S.) from four-year college or university; or two to four years of related experience and/or training; or equivalent combination of education and experience. Technical Skills • Proficiency in CAD software (SolidWorks, NX or equivalent) for layout design, automation cell concepts, tooling fixtures, and process documentation, • Working knowledge of PLC-controlled equipment and industrial controls, with the ability to interface effectively with OEMs, integrators, and maintenance teams for troubleshooting and system optimization, • Experience developing or supporting automated manufacturing cells, including robotics, conveyors, vision systems, or automated assembly equipment, • Strong understanding of industrial networks and data connectivity to support machine integration and data capture, • Ability to interpret and develop electrical schematics, P&IDs, and control narratives, • Familiarity with manufacturing data systems such as MES, machine monitoring platforms, CMMS, or ERP integrations, • Experience with capital equipment specification, FAT/SAT, commissioning, and validation, • Advanced Excel skills and comfort working with manufacturing data analytics tools (Power BI, SQL, or similar preferred), • Exposure to robot programming or structured automation programming standards, • Understanding of cybersecurity considerations in connected manufacturing environments Language Skills: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers and the general public. Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Mechanical Engineer Your Role: As a Mechanical Engineer, you will support the NPI (New Product Introduction) division in the design and development of cutting-edge technology, new products, processes, and automation for OEMs and startups. This role provides expertise to solve, design, process, and manufacturing challenges using various tools of the trade, including CAD, FEA, and other hands-on activities. Reports To: Engineering Manager Essential Functions: • Using CAD and other tools, ability to generate designs and manufacturing drawings adhering to customer specifications within defined cost, quality and delivery parameters., • Provide concepts and drawings in analog and digital formats., • Provide engineering analysis to support manufacturing, design and process development, • Apply knowledge in mechanical power transmission, fluid power, mechanical components, fabrication and basic automation for design and development., • Work with and support cross-disciplinary teams to solve product design, manufacturing and process problems., • Ability to respond quickly and professionally adhering to delivery requirements., • Participate in customer meetings and travel (<5days/year) as required., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • CAD for 3D design and detailing; Solidworks, Inventor and/or CREO skills required., • Experienced in technical communication internally and externally; email, technical write-up, presentation, meetings., • MS Office: Word, Excel and PowerPoint., • Engineering Design: CAD, FEA, FMEA techniques, Analysis (stress, displacement, thermal), DFMA, tolerance analysis and GDT., • Experienced in developing and communicating project progress., • Experience with various manufacturing processes, i.e. machining (CNC, Mill, Lathe), sheet metal, welding, and materials., • Minimum education: BSME – 4 YEAR Mechanical Engineering / Engineering Technology Degree, • 3-5 years Engineering Design or problem solving with commercial or industrial equipment/processes., • 1-2 years minimum CAD design experience in SolidWorks or CREO., • Knowledge of industrial control systems and software a plus Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability Other: • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000-$85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR 34p6exsC3b

Job Description Title Coating Engineer (Thin Films) Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: The Coating Engineer position is responsible for supporting the vacuum thin film coating manufacturing of both catalog and specialty optical components and includes interacting with other engineers and manufacturing staff. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Support the manufacturing of PVD thin film coatings in all directions., • Collaborate with R&D and manufacturing to ensure successful implementation of coating designs., • Provide technical support to Operations on proper substrate handling, cleaning techniques, coating materials, coating designs, coating tools and continuous improvement of manufacturing methods., • Assist manufacturing staff in the operation and utilization of metrology instruments for thin film characterization., • Identifying and diagnosing issues on the production floor, as well as collecting and preparing supporting data, especially with regards to coating equipment and processes., • Provide management with technical tradeoffs and risks pertaining to project work as well as general engineering efforts such that management may make informed decisions., • Improves coating designs and processes for manufacturability, performance, and cost., • Leads root cause analysis / corrective action activities for coating related processes., • Trains technicians on the execution of optical coating manufacturing processes., • Monitors and drives continuous improvement of manufacturing processes., • Supports troubleshooting of existing optical coating equipment and processes. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively Physics or Materials Science. Minimum of 2 years experience in optical thin film coating design and manufacturing. • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage. Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: * While performing the duties of this job, the employee is regularly required to use hands and fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear * The job may involve prolonged periods of sitting/standing. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain). * Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. * Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) * Generally, works in a clean environment and works to maintain the environment as such. * Safety Glasses are required and may require area specific safety training. * This position works in a manufacturing environment. The noise level in the work environment is usually loud. * The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles. * May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday 7am - 3:30pm

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn, and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is currently seeking a Senior Project Engineer to join our Fuel Facility team. Location at a C&S office is preferred; however, a remote location is negotiable. Full-Time is Preferred; however, Part-Time is negotiable. The Senior Project Engineer is expected to have good relationships with clients and professionals in the fueling systems industry and will be responsible for generating project opportunities and managing fueling systems projects. In this role, the Senior Project Engineer will work with our multi-disciplinary design team to deliver projects in the aviation, automotive, and related fueling systems markets. Position Responsibilities • Develop effort budgets and schedules for prospective project pursuits., • Develop working relationships with existing and prospective clients and professionals., • Generate project opportunities., • Develop and optimize processes for improved efficiency, sustainability, and cost-effectiveness. Apply advanced problem-solving techniques and tools to enhance process design and operations., • Ensure all engineering projects comply with applicable codes, standards, and regulations. Maintain an up-to-date knowledge base of industry standards and government regulations., • Implement and oversee quality assurance protocols to maintain the quality of engineering outputs. Conduct reviews and audits of project deliverables to ensure technical accuracy and integrity., • Champion safety protocols and risk management practices throughout project lifecycles. Analyze potential risks and develop mitigation strategies to prevent accidents and operational failures., • Develop P&IDs for, but not limited to: Aviation Fueling Systems, Automotive Fueling Systems, Heating Oil Systems, and Emergency Generator Systems., • Communicate effectively with all stakeholders, including management, clients, regulatory bodies, and project teams, ensuring clear and consistent communication regarding project progress and issues., • Mentor less experienced engineers and support their professional development., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Minimum bachelor’s degree in mechanical, environmental, or industrial engineering or other similar degree., • Minimum 10 years’ experience working on flammable and combustible liquids fueling systems projects., • Professional Engineer (PE) license preferred or willing to pursue PE license., • Understanding of flammable and combustible liquids engineering principles, methodologies, and tools., • Ability to analyze complex engineering problems and develop effective solutions., • Comprehensive knowledge of relevant industry standards, safety regulations, and environmental laws., • Ability to write sequence of operation processes with P&IDs., • Excellent verbal and written communication skills, capable of effectively articulating technical information to non-technical stakeholders and writing detailed reports., • Efficient in; Bluebeam (or other PDF reader), Microsoft Word, Microsoft Excel, and Microsoft Outlook. $120,000 - $140,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionDescription: Addison Precision Manufacturing is a world-class contract manufacturer of precision-machined components. Our focus reflects a commitment to machining excellence, and we strive to deploy the latest technologies to meet the highest standards of any industry requiring precision machined components, including customers in the aerospace, aircraft, medical and precision manufacturing industries. In 2019 we built a brand new, air conditioned, state of the art, manufacturing facility. We are looking to build our team here. Addison Precision Manufacturing is looking for Process Engineer who will develop and maintain processes in a lean manufacturing setting. The Process Engineer works with both the customer and fellow departments to develop and improve the manufacturing process by studying product and manufacturing methods. Process Engineers have the ability to contribute their knowledge and ideas to improve upon current processes, resulting in reduced cycle times, improved quality of product and increased cost savings. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceRequirements: Duties & Responsibilities: • Support manufacturing in productivity and quality improvements, • Assure product and process quality by designing testing methods, establishing standards., • Develop and maintain manufacturing process flows., • Collaborate with Engineers, Contractors and Suppliers, • Optimize processing capabilities through use of continuous improvement principles, • Assist in the development (design and machine) new/existing features., • Support Root Cause Analysis and Corrective Action determination, • Bachelor's or Master's degree in Engineering preferred or equivalent experience., • Previous experience as a process engineer or similar role preferred., • Familiarity with manufacturing equipment and quality assurance techniques., • Project management skills, • Problem solving ability, • Strong GD&T knowledge, • Continuous commitment to health and safety standards., • Contribute to a team effort as well as being able to work independently.

Job Description PEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Quality Engineer Your Role: Under the direction of the Quality Director, you will assist in elevating and systematizing engineering and manufacturing processes. Daily activities will require you to proactively identify potential issues to mitigate risk, improve product quality, manage industry and regulatory compliance and assist in delivering corporate strategic initiatives. Essential Functions: • Analyzes quality performance data and metrics to identify and drive improvement opportunities. Actively promote and participate in a cross-functional teamwork environment. * Facilitate and promote the use of appropriate problem-solving techniques for effective root cause analysis and successful corrective action for customer complaints and internal nonconformances. * Understand and promote overall compliance with AS9100/ISO9001 and 13485 specifications as they relate to product conformance and contractual requirements. * Understanding of inspection methodologies used to determine compliance for machined and assembled products. * Manage, conduct, and support internal and external audits, publishing findings and recommendations. * Lead in the implementation of assurances, process controls, and corrective and preventative actions (CAPA) related systems designed to meet or exceed internal and external requirements. * Drives continuous improvement and prevention of future failures by helping facilitate the implementation of corrective action. * May be accountable for projects/ programs and developing methods and parameters, project methodology, and/ or project proposals. * Demonstrate a productive work ethic and commitment to quality that sets the standard for PEKO Standards. Associate degree in Engineering or equivalent. * 2+ years of quality control experience in a manufacturing environment * 4+ years of experience utilization of Quality Management Systems (QMS) * 4+ years of creating and/or managing Design History Files (DHF) and Device Master Records (DMR). * Knowledge of ISO 13485 and AS9100; ability to establish quality protocols and procedures that align with requirements. Preferred Qualifications: * Bachelor’s degree in engineering or equivalent * Strong communication, negotiation, team moderation skills, and ability to manage time and workload constraints. * Good understanding of QA methodologies, tools, and processes. * Knowledge in the application of quality methods and problem-solving tools (TQM, Six Sigma, 8D, 5-Why, Lean Manufacturing, or other continuous improvement methodologies). Work Authorization: US Persons PEKO Perks: * Competitive Compensation * Tuition Reimbursement (IRS Allowable pre-tax Max) * 401K, Medical, Dental, Vision * Flexible Spending & Health Savings Accounts * Life, Short and Long-Term Disability * Recognition Awards & Discretionary Benefits Our Core Values: * Compassion: We care about our talented and loyal PEKO family. * Safety: We are committed to providing a safe, clean, and positive workplace. * Integrity: We believe in transparency, honesty, and respect for all stakeholders. * Agility: We are dedicated to maintaining an agile and financially prudent organization. * Endurance: We foster the belief that PEKO people are resilient problem-solvers impacting the future. * Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: * This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice A reasonable estimate of the compensation range for this position is $60,000 - $89,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements.. Powered by JazzHR bprvXbhRjI

Job DescriptionProcess Development Engineer – SolarSummaryThe Process Development Engineer is responsible for developing, implementing, and optimizing thin-film coating processes to support stable, high-volume production of photovoltaic (solar) modules.Reporting StructureReports to: VP, ManufacturingLocationRochester, NY areaKey ResponsibilitiesProduct R&D • Design and execute experiments to develop and improve materials and manufacturing processes for enhanced product performance, • Conduct lab and pilot-scale testing; analyze results and recommend next steps, • Monitor product and process performance throughout development cycles, • Evaluate data and identify continuous improvement opportunities, • Perform material characterization using tools such as SEM, AFM, XRF, and profilometry, • Support implementation of in-line metrology tools to ensure coating quality and consistencyManufacturing Development, • Optimize processes for high-volume, stable production environments, • Develop and maintain process documentation and SOPs, • Define equipment requirements and assist with vendor selection, • Support production cost estimation and process efficiency improvements, • Ensure compliance with environmental, health, and safety regulations, • Assist with production line layout and scale-up activitiesRequired Qualifications, • Experience developing thin-film products and manufacturing processes, • Knowledge of roll-to-roll processing (unwinding/winding, splicing, coating, laminating, web handling), • Exposure to manufacturing or production environments, • Experience with at least one of the following:, • Gravure coating, • Slot die coating, • Flexographic printing, • Laser patterningPreferred Qualifications, • Experience with thin-film solar technologies (e.g., perovskite solar cells), • Ink formulation experience, • Design of Experiments (DOE), • Vacuum deposition or atomic layer deposition, • Lean manufacturing knowledge, • Project management experienceEducation & Experience, • Bachelor’s degree in Engineering, Science, or related technical field (advanced degree preferred), • Experience supporting production environments, • Experience with process or product scale-upCore Competencies, • Strong technical and analytical problem-solving skills, • Ability to collaborate across teams and with external partners, • Familiarity with process simulation tools and standard operating procedures, • Experience with CAD/AutoCAD preferred, • Understanding of health and safety regulationsPhysical Requirements, • Ability to bend, twist, push, and pull as needed, • Ability to lift up to 40 lbs #DHIR26

Job Description Insero Talent Solutions is recruiting a Senior Quality/Industrial Engineer for an electronics manufacturing company in Rochester, NY. GENERAL RESPONSIBILITIES: Responsible for documentation control and with analyzing, designing, and improving processes and systems to enhance efficiency and quality in electronics manufacturing operations. This role will also be responsible for manufacturing support and quality initiatives, including creating and maintaining product and component data within the SAP System, and change control for both production and R&D. SPECIFIC RESPONSIBILITIES • Responsible for site management of SAP master data such as the generation of part numbers, BOMs, and routings., • Collaborate with engineering, manufacturing, and supply chain personnel to implement product changes for current and next generation products. Maintain documents at various product stages ranging from the creation of part numbers to the release for manufacturing., • Lead quality assurance initiatives to ensure compliance with industry standards and regulations., • Develop and maintain documentation of processes, standard operating procedures (SOPs), engineering/manufacturing changes and training materials in accordance with ISO 9001:2015 and industry standards., • Review and coordinate with Engineering, Sales, and Safety Agencies on product manuals and labeling, • Bachelor's degree in Industrial Engineering, Quality Engineering, Manufacturing Engineering, or a related field., • Relevant certifications (e.g., Six Sigma, ASQ Certified Quality Engineer) would be beneficial., • Strong knowledge of general manufacturing, quality control, and lean principles., • Skilled in MS Word and Excel; experience with SAP preferred., • Must be detail oriented and organized in reviewing information, identifying issues, evaluating options and proposing solutions., • Effective written and verbal communication.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance:We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $80,000 - $90,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR N4jTrb8oH0

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a skilled Quality Engineer to drive quality excellence through process improvement, quality system management, and engineering solutions. This role combines technical expertise with leadership to ensure product quality, maintain compliance standards, and foster a culture of continuous improvement across the organization. This hands-on role requires significant shop floor presence, working directly with inspectors and operators to ensure quality standards are maintained in real-time. The ideal candidate must be comfortable balancing theoretical quality principles with practical, day-to-day production support. Key Responsibilities: • Maintain an active floor presence throughout production areas and work directly with quality personnel to resolve quality issues in real-time., • Guide operators through complex inspection requirements and troubleshoot quality issues on the spot., • Collaborate with customers to complete source inspections., • Support production with immediate quality decisions., • Ensure proper use of inspection equipment and validate inspection methods in real production conditions., • Assist quality leadership personnel with auditing company policies, procedures, and systems that affect product quality to assure compliance with the company’s quality system and good manufacturing processes., • Establish and implement product and process quality standards while remaining in compliance with ISO9001, AS9100 and NADCAP requirements., • Lead INCR/NCR investigations., • Complete analysis on incoming products and approve all product receipts., • Inspect and test materials, equipment, processes, and products to ensure quality specifications are met., • Develop user-friendly inspection documentation for operators, such as visual aids and inspection guidelines., • Develop First Article Inspection (FAI) documentation and procedures., • Maintain inspection documentation system and update inspection procedures., • Specify and order appropriate inspection gauges and develop gauge control and calibration requirements., • Identify customer flow down requirements., • Collaborate with operations managers on process control development., • Develop, implement, and validate corrective actions for quality issues to prevent issue recurrence. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in engineering, Manufacturing, or related technical field with 3+ years quality engineering experience OR associate’s degree in related technical field with 5+ years of progressive quality experience in manufacturing and comprehensive understanding of quality principles., • Demonstrated proficiency in GD&T and blueprint reading., • Experience with measurement equipment and gauging systems., • Practical knowledge of SPC and quality tools., • Understanding of ISO 9001, AS9001 and NADCAP quality systems., • Background in manufacturing environment – precision machining or aerospace highly preferred., • High proficiency in computer technology and systems operations., • Strong analytical and problem-solving skills couples with an attention to detail. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description Javlyn Process Systems a member of Krones Process Group North America is seeking a skilled Electrical Controls Engineer to develop, design, and implement electrical and automation systems for liquid processing facilities. The ideal candidate will have a strong background in industrial control systems, electrical schematics, and process automation specific to fluid handling systems. Javlyn Process Systems is a process engineering and control system integration company employing degreed Computer, Electrical, Chemical, and Mechanical engineers. Our focus is on providing automated process system solutions for the food, beverage, dairy, and pharmaceutical industries. We fulfill a niche within these industries by offering custom solutions and professional services to design and operate manufacturing facilities under optimal conditions. We are a subsidiary of Krones AG, an international firm with over 20,000 employees worldwide. Key Responsibilities: • Electrical Design & Documentation, • Develop detailed electrical design packages including control panel layouts, wiring, • diagrams/schematics and I/O lists., • Develop Motor Control Center designs and layouts., • Select and specify electrical components (PLC I/O, Safety Equipment, VFDs, Enclosures,, • etc.) suitable for liquid processing environments., • Ensure compliance with industry standards., • Process Integration, • Collaborate with process engineers to integrate control systems with pumps, valves and field instrumentation that measure temperatures, flows, pressures, levels, etc., • Project Execution & Support, • Participate in cost estimating., • Lead electrical checkout efforts at control panel fabrication shops., • 5 to 15 years of experience in electrical and automation design, preferably in the liquid processing industry (e.g., dairy, food, brewing, chemical, etc)., • Experience designing control systems with PLC’s, • Proficiency with AutoCAD and/or AutoCAD Electrical., • Proficiency with Microsoft Word and Excel., • Knowledge of applicable electrical codes and standards., • Degree or diploma in Electrical Engineering, Automation, or related field., • Familiarity with process instrumentation., • Combination of office-based design work and field/site visits. Travel (20-25%) throughout the U.S. is required. The amount of travel varies based on project assignments, project location, and level of responsibility.

Job Description Job Summary: We are seeking a highly skilled Senior Mechanical Engineer specializing in HVAC systems within manufacturing environments. This role is responsible for the design, optimization, and maintenance of HVAC systems that support production processes, environmental control, and regulatory compliance. The ideal candidate has strong experience in industrial ventilation, process cooling/heating, and contamination control, with a focus on reliability, efficiency, and safety in manufacturing operations. Key Responsibilities: • Lead the design and engineering of HVAC systems for manufacturing facilities, including process ventilation, dust collection, cleanrooms (if applicable), and thermal control systems., • Perform heating and cooling load calculations based on process requirements, occupancy, and equipment heat loads., • Design ductwork, piping, and equipment layouts to support production efficiency and environmental standards., • Select and size HVAC equipment such as chillers, boilers, air handling units (AHUs), exhaust systems, and filtration systems., • Ensure systems meet regulatory requirements (e.g., OSHA, EPA) and industry standards (e.g., ASHRAE)., • Support plant operations by troubleshooting system issues, improving performance, and minimizing downtime., • Collaborate with production, maintenance, EHS (Environmental Health & Safety), and facilities teams., • Lead or support capital projects, including system upgrades, retrofits, and new facility expansions., • Conduct energy assessments and implement efficiency improvements to reduce operating costs., • Oversee installation, commissioning, and validation of HVAC systems in manufacturing settings., • Develop and maintain engineering documentation, SOPs, and preventive maintenance strategies., • Mentor junior engineers and provide technical leadership across projects. Qualifications: • Bachelor’s degree in Mechanical Engineering., • 7+ years of HVAC engineering experience, with a strong focus on manufacturing or industrial environments., • In-depth knowledge of industrial HVAC systems, including process ventilation, make-up air systems, and environmental controls., • Proficiency in engineering and design tools (e.g., Solid Works, AutoCAD, Revit, HAP, TRACE or similar tools., • Familiarity with energy codes and sustainability standards (e.g., UL 60335-2-40, LEED). Skills & Competencies: • Strong analytical and problem-solving abilities in complex industrial systems., • Excellent project management and organizational skills., • Ability to work cross-functionally with operations and engineering teams., • Strong communication skills, both technical and non-technical., • Focus on safety, compliance, and continuous improvement. Work Environment: • Mix of office, production floor, and fieldwork in manufacturing facilities., • Exposure to industrial conditions such as noise, heat, dust, and mechanical equipment., • May require occasional travel between plant sites. Preferred Experience: • Experience with large-scale commercial or industrial HVAC systems, • Knowledge of building automation systems (BAS), • Experience in sustainable design and energy efficiency projects

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. About the Role: The Controls Engineer position blends strong controls engineering expertise with hands-on manufacturing engineering to improve automation, equipment reliability, and production efficiency. This role requires deep technical knowledge of PLC programming, CNC programming and setup, robotics, and industrial automation systems combined with a strategic mindset for driving continuous improvement and digital manufacturing initiatives. The Controls Engineer will play a critical role in designing, integrating, troubleshooting, and optimizing automated manufacturing systems across molding, machining, assembly, and secondary operations. This individual will partner with Operations, Maintenance, Quality, and IT teams to implement robust control systems, modernize equipment connectivity, and support the plant’s Industry 4.0 and automation roadmap. This role is ideal for someone who thrives at the intersection of controls engineering, manufacturing process development, and continuous improvement. What You’ll Be Doing: • Design, program, and maintain PLC-based control systems for automated manufacturing equipment, assembly cells, robotics, and material handling systems, • Support CNC programming, setup, and process optimization for machining operations to improve cycle times, repeatability, and product quality, • Lead automation integration projects, including robotics, vision systems, automated inspection, and secondary operations, • Troubleshoot and resolve equipment controls issues across production lines to minimize downtime and improve equipment reliability, • Develop and standardize control architectures, electrical schematics, and automation documentation, • Collaborate with maintenance and operations teams to support equipment upgrades, retrofits, and preventative maintenance strategies, • Integrate machines and automation systems with plant data systems, machine monitoring platforms, and digital manufacturing tools, • Partner with cross-functional teams to support new product launches, equipment installations, and process validation, • Implement data collection and automation technologies that improve production visibility, traceability, and decision-making, • Support the development of standard operating procedures, control logic documentation, and training materials for automated systems, • Evaluate and implement automation and robotics opportunities to improve safety, throughput, and cost competitiveness, • Work with external automation vendors, integrators, and OEMs to deliver reliable and scalable automation solutions Why This Role Matters This position is instrumental in advancing the plant’s automation capabilities and supporting the transition toward connected, data-driven manufacturing systems. By combining deep technical controls knowledge with manufacturing engineering expertise, this role will help drive improvements in safety, equipment reliability, throughput, and overall operational excellence. We would love to hear from you if: • Bachelor’s degree in Electrical Engineering, Controls Engineering, Mechanical Engineering, or Manufacturing Engineering, • 5+ years of experience in industrial automation, controls engineering, or manufacturing engineering, • Strong experience with PLC programming (Allen-Bradley, Siemens, or similar platforms), • Experience programming or supporting CNC machines (Mastercam, NX, Fanuc, Haas, or similar), • Hands-on experience with industrial robotics, motion control, and automation systems, • Knowledge of industrial networking and communication protocols (Ethernet/IP, Profinet, Modbus, OPC), • Experience with electrical schematics, control panel design, and troubleshooting electrical systems, • Familiarity with machine vision systems, sensors, and automated inspection technologies, • Experience integrating equipment with MES, SCADA, or machine monitoring systems, • Strong problem-solving ability with a hands-on approach to manufacturing challenges, • Excellent communication skills and ability to collaborate across engineering, operations, and maintenance teams Preferred Experience: • Experience in plastic injection molding, machining, or high-volume automated manufacturing Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job Description Christa Construction – Customer Satisfaction through Quality, Service, and Value!! Christa promotes an environment of professional development and creative thinking that demonstrates our commitment to hiring and retaining the best people in the industry. Our team comes first, it’s known through our multiple awards such as Greater Rochester Chamber Top 100 Companies and Rochester’s Top Workplaces. As an employer, we’re focused on your growth in the company. From leadership development programs, state-of-the-art technology and an open-door policy to learn from each other, you own your personal growth and impact in the company as well as your career. We thrive on our outstanding client service and expertise. We are trying to ensure we are bringing the right kind of individual to join our team. • Does your work ethic typically outshine the ones around you?, • Do you know that you have the skills to impress, and the drive to deliver the highest quality in every situation?, • Is your history bursting with examples of your personal and professional success?, • Are you ready to catapult your career alongside the top professionals in the business?, • Are you the next best thing to happen to Christa? Let’s chat and see! Core Values: Christa’s Core Values inform our decisions and actions at all levels. They serve as ‘guard rails’ for behavior between employees, clients, subcontractors, suppliers, and other stakeholders. Communicating Christa’s Core Values and ensuring everyone internalizes them is essential to fostering and maintaining our amazing culture. Christa cares about: • Integrity: Clients, suppliers, employees, and communities we serve know we build with integrity., • Safety: We prioritize safety every day, on every job site., • Ownership mindset: We are responsible for our actions and accountable for results. Treat every project like it is your own., • Quality: We build every project with quality, exceptional service, & innovative construction methods., • Communication: We understand clients’ expectations, then deliver with clarity and transparency to the entire project team., • Balance: We are committed to hard work, balanced with creating time for family, friends, and fun. How will working for Christa benefit you? Not only will you be a part of a wonderful team of industry-leading professionals, but Christa offers great benefits including: Health Dental and Vision, generous 401K matching, PTO, Life & LTD, Tuition Reimbursement, Career Training and Development support, Valuable experience, and more! A successful Project Manager at Christa will provide project leadership while promoting Customer Satisfaction through quality, service and value. ESSENTIAL FUNCTIONS: • Supervises and directs the overall project. Duties include planning and coordinating activities with others; circumventing/resolving problem areas; and ensuring all company/project policies, procedures, and standards are maintained., • Achieves customer satisfaction by meeting or exceeding customer expectations. Customers include owners, architects, contractors, subcontractors, vendors, and employees., • Manages, directs, organizes, coordinates, and schedules the work of staff in their respective corporate divisions, • Ensures that projects are being managed effectively and are effectively operated, • Is responsible for the profitability of assigned projects and the completion of work per schedule and utilizes corporate standard operating procedures to accomplish this goal, • Solicits, purchases, writes, and manages contracts, contractors, and vendors in the execution of work, • Responsible for developing the financial schedule of values inclusive to the overall project budget., • Prepares and distributes payment applications on a monthly basis, • Tracks all project costs and prepares monthly cost to complete reports, • Cost codes all project invoices, • Solicits, procures, and manages the labor, material, and equipment necessary to execute the work of several projects, • Actively participates in the solicitation and procurement of new and future employees, • Ensures that standard administrative operating procedures are being complied with, • Creates, updates, and monitors construction schedules using Microsoft Project and adheres to company scheduling standards and practices, • Creates and submits all project RFIs and submittals, • Prepares and distributes all project meeting minutes, • Manages and maintains all changes to projects by posting drawings, updating Project Sight and creating as-built drawings, • Manages the closeout process at the end of projects to submit to appropriate parties, • Trains, mentors, and motivates the Assistant Project Manager and/or Project Engineer assigned to their projects QUALIFICATIONS & RESPONSIBILITIES: Top candidates will have 5-10 or more years of commercial construction project management experience (preferably in wood frame multi-family projects) and should be able to lead multiple projects. They will also take ownership of the project success with special consideration to schedule and budget adherence, and have the personal attributes to manage, direct, mentor and support employees through their daily work while demonstrating Christa’s corporate philosophy of outstanding business ethics and principles. Top candidates will also have advanced skills in the use of technology including MS Office products, PROCOR, and P6/Oracle. Advances skills in comparable programs will be considered equivalent. Project Managers typically have a range of physical requirements, including: • Mobility: Ability to move around job sites, which may involve climbing stairs, ladders, or scaffolding., • Stamina: Capability to work long hours, often on-site, which can include standing for extended periods and walking significant distances., • Vision: Good eyesight for reading blueprints, plans, and safety signage, as well as inspecting work., • Hearing: Ability to hear instructions, warnings, and safety alerts in a noisy construction environment., • Manual Dexterity: While not as hands-on as other roles, project managers may need to use tools or equipment occasionally, so basic manual skills can be beneficial., • Strength: While not always required, some physical strength may be necessary for tasks like lifting or carrying equipment, especially during site visits., • Coordination: Good hand-eye coordination is useful for tasks that require writing, reviewing plans, or interacting with technology., • Safety Awareness: Understanding and adhering to safety protocols is crucial, as construction sites can pose various hazards. Compensation for qualified candidates is determined by multiple factors including but not limited to verifiable experience, education, and technical skills. The pay range for this position is: $55-$100k annually Nestled on the shores of Lake Ontario, Rochester, is a vibrant city known for its rich history, dynamic economy, and diverse cultural scene. With a legacy of innovation and a strong sense of community, Rochester is the perfect place to live, work, and explore. The city boasts a history of groundbreaking achievements in technology and industry. As the headquarters for several major companies, Rochester continues to thrive as a center for innovation, research, and development. Rochester’s diverse economy includes strong sectors in healthcare, education, manufacturing, and technology. The region offers numerous opportunities for businesses and entrepreneurs, supported by a collaborative environment and a skilled workforce. You can also experience the arts and culture of Rochester through its world-class museums, theaters, and music venues. The George Eastman Museum, Rochester Philharmonic Orchestra, and the Strong National Museum of Play are just a few highlights of what is offered. Rochester is also home to an array of parks and outdoor spaces, including the scenic Highland Park and the picturesque Genesee Riverway Trail. Enjoy outdoor activities, festivals, and seasonal events throughout the year. Finally, Rochester is renowned for its high-quality educational institutions. These institutions drive research, innovation, and a culture of learning. Company DescriptionAffordable housing and apartmentsAffordable housing and apartments

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Product Engineer to join our team! This individual will be responsible for launching a new product such as stand-alone sheet metal components and up to complex electro-mechanical assemblies from documentation control/management through shipping. Key Responsibilities: • Responsible for selecting processes and assisting with cost estimates for new products and tools., • Responsible for Floor Engineering Tech support for his or her part portfolio or customer base., • Effectively utilize Lean Principles when engineering the manufacturing processes., • Develops and documents machine processes and manual processes appropriate for the materials used to manufacture new and existing Customer products., • Aware of new and existing products based upon the total production cost during the product launch and through life of the product., • Serves as technical expert for the Proview Team (Prototype), • Serves as technical expert for the NORP (New Order Review Process) Team for launching new product into Production., • Will assist Technical Sales Engineer for specific programs., • Responsible for assisting and reviewing complex cost estimates., • Responsible for product quality and process safety. Interfaces with Quality to determine effective Quality Plans and if necessary implement NCMR root cause and corrective action closure., • Manages Continuous Improvement Projects., • May be asked to mentor other Manufacturing and Tool Design Engineers and oversee cross-functional project teams ensuring cost and price profitability to drive cost up front. Qualifications:, • 5-10 years related experience or training, • Associates degree (A.S.), • Bachelors degree (B.S.) preferred Industrial/Manufacturing or Mechanical Engineering or equivalent combination of education and experience. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Microsoft Project, Internet Explorer, Auto-CAD, strong 3D modeling (SolidWorks). * Other Requirements: Familiar with the sheet-metal industry, including fabrication and hard tooling for stamping, forming and welding of steel, stainless, aluminum as well as other metals. Familiar with DFM/DFA principals to reduce costs. Strong GD&T skill set. Familiar with assembly techniques. Tool-making or tool-engineering experience a plus. Ability to present a positive ownership attitude towards work responsibilities. Mental and visual attention with concentration on detail. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Adhere to all safety protocols and regulations to ensure a safe work environment.

Job Title: Salesforce Project Manager.Location: NY/NJ (Hybrid – 3 days/week).Seeking a Senior Project Manager to lead Salesforce B2B delivery projects, managing end-to-end execution, stakeholders, and cross-functional teams.Manage multiple Salesforce projects (scope, timeline, budget).Drive projec

Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U. Coordinates efforts of many support groups including in-house crafts, engineers, and subcontractors. Develops projec

Island Hospitality Management - - Responsibilities: Perform routine and preventative maintenance on resort facilities; Complete minor repairs to rental homes and facilities; Inspect irrigation systems, playgrounds, pool/spa, and recreational amenities; Maintain resort pool(s) and test chemical leve

Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and training the Sailors who operate those reactors in the U. Preferred Skills PMP Certification Primavera P6 Experience Familiar with Construction Work Scopes Familiar with Engi

Tradesmen International - - Responsibilities: Perform regular inspections and routine maintenance of building systems and equipment; Perform routine inspections and preventive maintenance on plumbing, electrical systems, and other facility equipment to ensure optimal performance and prevent breakdo

The FM Safety Engineer will be responsible for, but not limited to, the following duties: - Development and execution of the FM Continuous Training Program - Ownership of the FM surveillance plan - Review of Engineered Technical Work Documents prior to FM execution - Performance of various IH/Safety

Nesco Resource - - Responsibilities: Maintain and repair equipment, pumps, and motors; Assist with pipe installations; Assist with electrical installations; Perform routine maintenance; Troubleshoot equipment.

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 9 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

Spectrum - - Responsibilities: Maintain and repair wires providing Spectrum Internet services from hub sites to customer connections; Monitor and report signal leakages and repairs; Provide 24/7 coverage day and night; Work independently outside; Communicate effectively with peers, customers, and s

Howmet Aerospace - 181 McKee Road - Responsibilities: Perform routine preventative maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of the building does not deteriorate; Visually inspect and test machinery and equipment; T

Aerotek - - Responsibilities: Perform routine and preventative maintenance of compressors, manufacturing equipment, and general building systems; Troubleshoot and repair production and molding equipment; Work closely with machine operators to ensure equipment is producing the correct product qualit

Schulte Companies - - Responsibilities: Oversees the property grounds, public areas and hotel guest rooms; Conducts preventative maintenance to prevent breakdowns in hotel accommodations; Responds to maintenance orders in a timely manner; Fulfills work orders in a timely manner; Completed daily rou

Aerotek - - Responsibilities: Prepare units for new tenants.Complete drywall work, including patching, sanding, and finishing.Perform minor carpentry projects and basic electrical repairs.Evaluate and test systems including appliances, plumbing lines, electrical components, and HVAC.Assist with sno

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car