Trabajos process safety engineer en Jacksonville, FloridaCrear alertas

Overview: MasTec Civil is hiring a seasoned Construction Project Manager near Jacksonville, FL! The Project Manager bears the full responsibility to oversee that the construction is performed according to specification, in the most efficient manner according to schedule and under budget. For this to happen the Project Manager is expected, among other things, to follow all project related procedures and of most importance, company policy. To accomplish these expectations the following procedures and guidelines have been established to facilitate the process. COMPANY OVERVIEW: Founded in 1987, MasTec Civil, LLC (formerly known as Condotte America) is a heavy highway contractor specializing in the construction of complex transportation projects that include roadway, bridges, interchanges, mass transit, and tolling facilities. In short, we build the roads and bridges that connect our families, our communities, and our nation. In doing so, client satisfaction is of primary importance to us and our record reflects our emphasis on understanding our client needs in order to exceed their expectations. MasTec’s Clean Energy and Infrastructure Group (CE&I) is a $4 billion annual revenue business unit that provides construction services for industrial facilities; building products manufacturers, power generation facilities, manufacturing plants; solar, wind, and thermal energy plants; buildings, and infrastructure. Responsibilities: • Planning and Scheduling: Make a thorough study of the project to be performed. Discuss your plans, schedules, and details. Problems etc. with your Division Personnel and your Management team. Asses your needs fully including personnel, equipment, materials, etc. and the time frame feasible for performance. Determine your best course of action and continue planning throughout the project for possible improvements. As part of the planning phase the following items are the responsibility of the Project Manager: Field Office Site Plan, Trailers, Permits and Fees, Establishing Utilities, Employee Parking, Temp. Roads, Lay Down Areas, Tool Cribs, Insurance & Bonds, Safety & First Aid., • Project Coordination: The Project Manager is the Company’s top representative at the project. Thus, the Project Manager shall attend all progress meetings with the Owner/Engineer and ensure that all required documents are submitted to the Owner in a timely manner. The Project Manager should conduct internal scheduling meetings with the Superintendents, Foremen and Subcontractors on a regular basis in order to properly coordinate work areas, labor, equipment, material and survey needs. In addition, it is expected that Pre-Activity Meetings be conducted prior to significant items of work (ie. Asphalt, concrete deck placements, girder/beam erection, traffic shifts, etc.) to discuss the responsibilities, means & methods (equipment, labor, etc.), MOT requirements, safety aspect, quality control requirements, etc., • Personnel Selection: The Main Office and HR Department will assist you in selecting key members of your management team. Personnel selection for all other project level employees will be your responsibility. The Project Manager should coordinate the projects staffing needs with the Human Resources Department. As the head of the field office, the Project Manager is responsible to ensure that that the company policies are enforced., • The Project Manager is responsible for the supervision of the Project Engineer and other engineer staff. The Project Manager should coordinate with the Project Engineer the hiring of outside Specialty Engineers for items of work that require highly technical analysis. As part of the management of the engineering staff, the Project Manager should serve as a mentor to young engineers assigned to the project., • Contract Documents: Familiarize yourself with your contract, specifications, plans, addendums, revisions, special provisions, permits, utility relocation schedules, etc. Know what is required for each item of work and how you get paid for the same. Be aware of any situation that entitles you to extra pay or warrants documentation for the initiation of a possible claim., • Project Manager must review and approve all invoices, subcontractor payments and timesheets prior to processing at the Main Office. Study each cost report in detail and note all variances in costs from estimates., • Cost Control: The Project Manager is responsible for the project’s budget and discuss with the Estimator all variances noted. The Project Manager shall understand the pay item estimate work sheets and communicate the information to the supervisors. Evaluate the cost effectiveness of the procedures in place and replace all those that are deemed ineffective. Take all necessary measures to avoid unplanned occurrences that mighty increase cost, such as accidents and injuries, equipment abuse, etc. Ensure that change orders and/or claims are properly documented, prepared and submitted to the Owner in a timely manner. Review and approve all budget changes and cost transfers. The Project Manager shall provide a monthly Project Status Report to accompany the monthly cost report. The Project Manager shall ensure that the monthly cost reports are reflective of the actual field performance. Cost reports shall have accurate quantities and projections., • Subcontractor/ Vendor Management: The Project Manager is responsible for the negotiations of subcontractors and vendors. Ensure that all subcontractors and vendors are paid in a timely manner in accordance with subcontract requirements and internal company procedures. Manage the subcontractor and vendor claims, change orders and disputes., • Documentation: Proper documentation is essential for the benefit of the Project and the Company. Ensure that all project team members (Superintendents, Engineers, Subcontractors) are submitting their required documentations (ie. Daily reports, accident reports, T&M Sheets, etc.). The Project Manager shall keep a detailed daily Diary of the project. Ensure that project photos and meeting minutes are being taken and filed accordingly. The Project Manager shall notify the client should a project record (ie meeting minutes) are inaccurate and/or incomplete., • Public Relations: The Project Manager is our top official on any project and therefore handles most negotiations, at least in the preliminary stages. Your integrity and performance of these duties reflect on our entire company, therefore, you are expected to conduct yourself in an honest, congenial, businesslike manner whereby your actions would be respected by your peers and the general business community., • Bachelor’s degree in Civil Engineering or Construction Management, • Minimum 10 years’ experience in the heavy construction industry. Must have bridge, roadwork, and DOT experience., • PMP Certification preferred Knowledge/Skills/Abilities • A demonstrated understanding of construction means, and methods associated with the heavy construction industry, • Strong team leadership project management skills., • Experience in leading multi-disciplined teams., • Ability to direct the work of subcontractors in order to achieve project goals., • Computer knowledge musts: Microsoft Excel, Microsoft Word, and Microsoft Outlook, Project scheduling - P-3 at minimum., • Ability to maintain onsite project documentation., • Ability to schedule and coordinate all site work., • Must be well organized and detail oriented., • Ability to multitask and manage multiple sites., • Ability to read and understand drawings and specifications., • Excellent verbal and written communication skills., • Ability to interact with people on all levels ensuring that all external and internal communication is carried out to a high standard., • Highly motivated, driven and results oriented, with the ability to thrive in a fast-paced work environment. What's in it for you: Financial Wellbeing • Compensation $110K-$140K / year, commensurate with experience, • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-DB1 #LI-ONSITE Appcast (For Export): #appred

Job DescriptionMaintenance Leader (Maintenance Supervisor) to oversee daily equipment reliability and performance for a high-speed production line. This role is perfect for someone with strong maintenance team leadership experience in a food or beverage manufacturing environment who thrives in fast-paced, hands-on operations. DUTIES / RESPONSIBILITIES • Lead, schedule, and coordinate daily maintenance activities across a dedicated production line, • Supervise maintenance techs, review work orders, and ensure timely issue resolution, • Drive preventive and autonomous maintenance strategies (PM, AM, CIL, CL, BDE), • Collaborate with Production Line Leader and Process Engineer as part of a line leadership team, • Analyze downtime trends and recommend improvements based on data and KPIs, • Ensure all safety and compliance standards are met QUALIFICATIONS / REQUIREMENTS • Experience supervising maintenance teams in beverage, food, or CPG manufacturing, • Solid understanding of mechanical, electrical, and preventative maintenance systems, • Proven ability to lead in high-speed, continuous operations, • Familiar with CMMS, root cause analysis, and equipment documentation, • Strong communication, planning, and cross-functional leadership skills E04JI800n8pv408ff4a

Job DescriptionQuality Engineer Position Type: Full-time, Exempt, Salary Reports to: Quality Assurance Manager Supervisory Responsibilities: None Location: Jacksonville, FL (Manufacturing Facility) Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in the preparation for the energy needs of tomorrow. In business for 25 years, we’ve delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners’ unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today’s energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Job Summary As a member of the Stellar Energy Quality Team, the Quality Engineer is responsible for providing quality support during design, procurement, manufacturing, and test activities on Stellar Energy projects. The major objective of the position is to assist in the management of day-to-day quality activities to assure the Stellar Energy fabricated modules meet project delivery goals. The Quality Engineer will also assist in the maintenance of the Stellar Energy Quality Management System (QMS) to ensure overall ISO compliance. Essential Functions • Establish manufacturing inspection program with appropriate procedures and forms or review and comment on contractors proposed procedure., • Perform inspections on activities and material. Coordinate inspections by other parties. Provide third party review of destructive/non-destructive test results and data., • Assist in the supplier evaluation and selection process., • Witness or provide for the witnessing of testing of systems and equipment including tolerance checks or other inspections as specified in the quality control inspection procedures., • Review quality specifications for project and proposal., • Coordinate internal auditing activities., • Maintain good interface with other disciplines., • Prepares for ISO 9001 and other audits. Competencies • Good written and verbal communication skills, • Organizational skills, • Problem solving/analysis. Work Environment Most work is performed in an office environment with frequent work in a manufacturing / assembly environment. Fabrication Shop observation and support may be necessary which will require the use of personal protective equipment such as safety glasses and mandatory head protection. Some of the work will require exposure to loud noises or fumes in the facility. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. May lift and carry measuring instruments, tools, and test equipment; ascend and descend ladders and platforms; work in a variety of positions such as stooping, kneeling or squatting. The employee may occasionally be required to sit, climb or balance; and stoop, kneel, crouch or crawl. The employee must lift and/or move up to 25 pounds and occasionally lift and/or move up to 75 pounds. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5 p.m. Travel Anticipated travel for this position is less than 25%. Some occasional local day travel or overnight travel may be necessary. Required Education and Experience • Bachelor of Science degree in Engineering or technical field from an accredited University., • Minimum of 5 years of experience in industrial QA/QC or similar projects working experience., • Certified ISO 9001 internal auditor, familiar with ISO 9001:2015 systems., • Familiarly with process control, Lean, SPC tools, Six Sigma, etc. Preferred Education and Experience • QMS Auditor trained., • Familiar with selection and technical requirement of general mechanical equipment including pumps, chillers, cooling towers, heat exchangers, etc. Additional Eligibility Qualifications None required for this position. Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description The Senior Mechanical Engineer will be responsible for the design of mechanical systems as part of a team that designs buildings and support systems for food processing plants and warehouses. The candidate will be responsible for the design and specification of utilities, HVAC, and plumbing systems. Any fire protection design experience will be a plus. You will work on projects from concept to issuing of construction drawings through construction administration efforts such as the review of equipment submittals and technical support. This position involves advanced technical knowledge, project management skills, and leadership abilities to guide junior engineers and designers collaborating with cross-functional teams. Duties/Responsibilities: • Design Utilities systems that supply fluids and gases to the building and process users via pressure piping systems. Systems commonly designed include steam generation and distribution, hot water heating and distribution, compressed air, chilled water, chilled glycol, cooling tower water, cold water distribution, water pressure booster packages, low/high pressure water pumping, natural gas, and nitrogen., • Size Utilities equipment and piping distribution systems by totalizing the loads from data available from owner/process provided equipment needs, hot/cold water requirements for restroom fixtures, analysis of metering data, HVAC and refrigeration equipment needs, and using engineering judgement for diversity or appropriate safety factors., • Produce Utilities pipe material and insulation schedules and work with vendors as required to select equipment and produce equipment schedules for the drawings., • Utilities design is to include controls sequence of operations write ups and/or controls expectations on the utilities equipment schedules., • Design Plumbing gravity drainage systems such as sanitary, storm, and process waste. This will include venting, isometric riser diagrams, pipe and fixture schedules., • Design HVAC systems that commonly use rooftop equipment, split systems, 100% outside make up air, exhaust systems, and heat pumps. The use of DX refrigerants, chilled/glycol, natural gas, and steam are commonly used for the units., • Size the HVAC equipment by totalizing the loads from data available from the owner/process provided equipment needs, and calculating the cooling and heating loads using internal load spreadsheets and load estimating software such as Trane Trace or IESVE. Size any associated ductwork by doing velocity and pressure drop calculations., • Produce HVAC ductwork material and insulation schedules and work with vendors as required to select equipment and produce equipment schedules for the drawings., • HVAC design is to include controls sequencing of operations, pressurization and hygienic zoning., • Produce drawings using Revit 3D modeling software (occasionally AutoCAD) or oversee Designers/Engineers assigned to the project team to produce the drawings., • Collaborate with cross-functional teams, including architects, civil engineers, electrical engineers, structural engineers, process engineers, design project managers, construction Project managers, owners, etc., • Conduct building assessments and feasibility studies to evaluate design options for clients. This may include equipment pricing from vendors, but installation pricing would be performed by others at Stellar., • Adhere to project timelines and budgets., • The candidate will be responsible for conceptual development, detailed design, calculations, construction level documents, oversight of Revit production resources, responding to RFIs, shop drawing and submittal review, site inspection visits, and record drawings. The role at times may require independent work or the need to manage team members assigned to their projects, while ensuring project requirements, schedule, and overall document quality are met. Inter-discipline coordination, BIM clash detection, and site inspections will be required. The candidate must be a team player and committed to the quality of work generated., • Fire Protection design experience will be considered a plus. Skills of interest include the ability to analyze flow tests, hydraulically size sprinkler piping such as site service feeds, loops, mains, and sprinkler distribution using software (Stellar uses Hydracalc) and then provide sizing/selections of sprinklers, fire pump boosters, and tanks., • Other duties as assignedRequired Skills/Abilities:, • In depth knowledge of mechanical engineering principles, applicable codes and standards such as ASME, ASHRAE, International Mechanical Code, International Plumbing Code, International Fuel and Gas Code, International Energy Code, etc., • Excellent verbal and written communication skills to convey complex technical information clearly and concisely., • Strong interpersonal skills to work effectively with team members, clients, and stakeholders., • Ability to work independently and as part of a team., • Ability to prioritize tasks, manage time efficiently, and meet milestones., • Ability to analyze and interpret technical data and drawings., • Excellent problem-solving and critical-thinking skills., • Proficiency in using mechanical engineering software and tools and Microsoft products such as Excel, Word, Teams, and Outlook., • Attention to detail and a commitment to producing high-quality work., • Strong leadership and mentorship capabilities, with the ability to inspire and guide junior engineers and designers., • Highly organized, with the ability to manage multiple projects and priorities simultaneously.Education/Experience:, • Bachelor's degree in Mechanical Engineering is required: Current P.E. license is preferred., • Minimum of 10 years of experience in mechanical engineering design is required: industrial facilities or food and beverage experience is preferred., • Basic capabilities in AutoCAD and Revit such as pan/zoom are required; modeling proficiency is preferred. Travel Requirements: • Flexibility to travel on short notice for urgent business needs, to attend meetings, trainings, and events., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures. Physical Requirements:, • Ability to sit, stand, and walk for long periods of time., • Ability to use a computer, phone, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use, • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials., • Ability to climb stairs and/or ladders. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Stellar is seeking a Refrigeration Engineer to design refrigeration systems using the Design-Build delivery method and to be responsible for all aspects of assigned design projects. This role requires making technical decisions and directing the refrigeration scope of work for each project. Under the supervision of the Director of Engineering, the Refrigeration Engineer will work within the Industrial Refrigeration division on Food & Beverage projects across the United States. Responsibilities • Designing, developing, maintaining, and optimizing refrigeration systems and equipment, including selecting the most appropriate and economical refrigeration system for each project, • Developing initial outline scopes of work, block flow diagrams, PFDs, P&IDs, preliminary equipment selections, and technical reports, etc., • Preparing project specifications, • Managing project-level design technical decisions, • Conducting site visits to inspect installation quality and completion status, • Delegating and/or reviewing equipment schedules, control group designs, final line sizing, and mass & energy balances, • Overseeing completion of engineering tasks, accuracy of drawing packages/Revit models, and adhering to assigned work schedules, • Supervising production work performed by Refrigeration Designers, • Reviewing all technical aspects of refrigeration submittals, • Coordinating with other disciplines – especially HVAC, • Creating, editing, reviewing, and issuing drawings or redline markups, • Conducting Process Safety Management and Process Hazard Analysis studies, • Ensuring compliance with code changes and Stellar engineering standards, • Participating in industry organizations such as IIAR and ARF, • Providing presentations internally and externally, • Ability to manage multiple, complex projectsQualifications, • Over 10 years of industrial refrigeration engineering experience, • Experience designing with NH3, Glycol, Freon, CO2, • BS degree in Mechanical Engineering or related field, • PE licensure is highly valued, • Strong written and verbal communication skills, • Ability to contribute effectively as part of a collaborative, multidisciplinary tea About Stellar: Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job DescriptionJob Title: Quality Control ManagerJob Description The Quality Control Manager plays a crucial role in maintaining the highest quality standards in construction projects. You will work closely with project managers to provide updates on quality control and address any issues that might affect project progress. This position requires coordinating with testing agencies, overseeing subcontractor submittals, and managing material orders and equipment. You will be responsible for conducting safety meetings and inspecting site practices to ensure safety and quality. Responsibilities • Communicate regularly with the project manager to provide quality control updates and advise on issues that may affect progress., • Coordinate, provide oversight, and review outside testing agencies for proper techniques and contract compliance., • Oversee subcontractor submittals and maintain the submittal register., • Order and receive necessary materials and equipment., • Administer weekly safety meetings and identify relevant safety elements related to quality control., • Monitor daily quality and safety practices to minimize corrections and punch-list items., • Exercise the authority to stop work if unsafe practices are observed., • Provide direction to the project engineer and prioritize critical path items to maintain project schedule., • Monitor subcontractor and supplier performance regarding timeliness, efficiency, and quality., • Review deliveries for timeliness and accuracy, ensuring consistency with approved submittals., • Complete daily reports on inventory, work items, weather conditions, quality and safety issues, and site visitors., • Provide weekly updates on 'as-built' conditions and maintain safety logs., • Create and coordinate the completion of punch-list items prior to 'Substantial Completion' certification., • Represent the company during testing of alarm systems, mechanical systems, and equipment., • Ensure all close-out documents are complete and submitted in coordination with project management.Essential Skills, • 10+ years of proven experience in Quality Control Management., • Current USACE/NAVFAC Construction Quality Management for Contractors certification., • Demonstrated job knowledge and timely decision-making using sound judgment., • Problem identification, information analysis, and recommendation skills., • Ability to meet established goals while ensuring quality through accuracy and thoroughness., • Capacity to take independent actions and calculated risks., • Proficiency in Microsoft Office suite and project management software.Additional Skills & Qualifications, • Bachelor's degree in Construction Management or similar field preferred., • Experience with Federal construction projects required., • Flexible, well-organized, and detail-oriented with efficient time management skills., • Works well in group problem-solving situations. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Stellar is seeking a Process Project Engineer to be responsible for supporting and managing a diverse engineering and design project team, and to serve both an internal and external customer base from a project’s inception to its completion. You will research, define, test, and implements processes and develop P&ID’s, Process Flow Diagrams, Utility drawings, project specifications, and equipment layouts for food-processing facilities. You'll be responsible for properly sizing, specifying, and integrating process equipment, as well as coordinating structural, mechanical, electrical and control systems, as required. Knowledge of food-processing, packaging, material handling, and other process equipment/systems in compliance with state, federal and/or International codes & standards is required. Knowledge of RTE, bakery, coffee, protein, or dairy/beverage processes preferred. • Design – responsible for the Process-related engineering aspects of a project. Works with Project Managers, Engineers, and Designers to develop Process Flow Diagrams, P&ID’s, and equipment layouts (General Arrangements) to efficiently meet customer specifications; ensures designs and layouts conform to specifications, code requirements, and food-safety requirements, • Provides direction to engineers, designers and CAD operators for the creation of engineering drawings, • Develops design specifications for external suppliers including OEM’s and Sub-Contractors, • Provides attentiveness to detail, follow-up procedures, and documentation of action; proficient in time-management and personal organization, • Generates and manages various forms of communication, including RFI’s and submittals, throughout the life-cycle of a project, • Communicates directly with equipment vendors to obtain all necessary designs, drawings, and utility information. Utilizes collected data to design equipment Utility drawings, • Prepares contract documents, calculations, observation reports, and estimates, • Procurement – aids in the bidding of equipment and services by generating the appropriate bid documents, managing the bidding schedule, and conducting a bid analysis, • Budget Control – assists by estimating layout costs (design and material) for specified process; seeks alternative methods that reduce cost of design; reviews activities to ensure design stays within projected costs, • Client Interface – effectively responds to the needs and requests of clients, as required, • Project Administration – utilizes company software/tools to ensure all necessary documents are in-place and processed; reviews and approves Engineering Change Notices; develops and implements design project schedules; schedules meetings as necessary with suppliers, owners, design teams, and permitting agencies; plans work schedules and timelines for support staff, • External Relationships – coordinates with outside engineering and architectural resources on all aspects of design; communicates with permitting and regulatory agencies, as necessary, • Provides onsite and/or offsite direction and support to Field Engineers and Superintendents throughout the equipment installation, startup, and commissioning phases of a project, • Assists in updating all record data and drawings for final project completion and turnover Qualifications • BS Degree in Engineering (Mechanical or Chemical preferred), • Minimum of 4 years of professional experience (Food and Beverage preferred), • Familiarity with Food Safety Designs and Guidelines, • Technical Writing Skills, • Skilled in relevant software; Procore, MS Office Suite, BlueBeam, Adobe, MS Project or Primavera P6, Power BI, AutoCAD and BIM / ACC, • Travel required to customer locations, OEM locations, and construction site locations About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description The Senior Process Engineer is responsible for leading the design and implementation of solutions that meet the needs of our food and beverage manufacturing operations. This role requires an understanding of food processing technologies, the design and delivery of production systems for food and beverage manufacturing facilities, with an emphasis on raw material storage, processing, thermal processing, mixing & blending, filling, and food safety compliance, as well as a commitment to sustainability and cost-effectiveness. The Process Engineer will work closely with cross-functional teams, including product development, marketing, engineering, architects, manufacturing, project management, and field staff to ensure that all process solutions are fully developed for a successful operation. Duties/Responsibilities: • Design processes to achieve project goals, • Define processing steps required to make food or beverage products, handle waste or byproducts, and cleaning systems., • Calculate equipment rates, create optimal food plant layouts, and prepare block and/or process flow diagrams to ensure all flows are understood and included in the design., • Engineer process equipment & systems, • Perform process calculations, size and select equipment & components; ensure designs comply with relevant codes, standards, & sanitary practices., • Develop P&ID’s, equipment specifications, installation specifications, equipment lists, controls narratives for coordination, and coordinate 3D modeling with design., • Coordinate with 3rd parties for equipment engineered by others, with internal or external project team members for integration of the process into plant infrastructure., • Support procurement of equipment & installation packages, • Assist in identifying suppliers & subcontractors, perform technical writing aspects in bid packages for scope definition, compile technical engineering documents for bid packages., • Participate in bid-scope reviews, assist in analyzing proposals, lead design reviews of drawings & models, attend coordination meetings, review submittals, participate in factory acceptance testing., • Support installation of process equipment, • Review installation submittals and participate in subcontractor coordination meetings., • Travel to site for technical assistance, coordinate directly with Stellar field staff and subcontractors, identify and resolve issues that arise, review installations for correctness, and revise drawings for as-built conditions., • Startup & commissioning of process equipment, • Assist in preparing comprehensive documentation of commissioning processes, test results, and system performance., • Assist in process system testing and commissioning activities, including functional testing, performance testing, and safety testing., • Coordinate with clients and stakeholders for system handover, providing necessary documentation and training for operational staff., • Maintain current knowledge of food manufacturing trends, regulatory requirements, and food industry-specific considerations., • Other duties as assigned.Required Skills/Abilities:, • Strong leadership and team collaboration skills., • Thorough understanding of the food industry, process systems, & plant operations., • Familiarity of startup and commissioning processes and procedures for process systems., • Excellent analytical, problem-solving and troubleshooting abilities, capable of identifying and resolving issues., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Knowledge and understanding of industry regulations, and standards including safety as relates to food or beverage manufacturing systems., • Flexibility to work in different environments and adapt to changing project requirements.Education/Experience:, • Bachelor of Science Engineering degree in Chemical, Manufacturing, Mechanical, or a related field., • Advanced degrees or certifications in continuous improvement methodologies are advantageous., • Minimum of 1-7 years of experience in food or beverage manufacturing systems. Relevant professional certifications are a plus., • Experience in calibration, startup and commissioning of food or beverage process systems is preferred., • Knowledge of Ingredients and their reactions to heating, cooling, mixing, blending, pumping., • Knowledge of Process Controls that support recipe management and product repeatability., • Knowledge of 3A, USDA, or FDA sanitation requirements and regulatory entities., • Skilled in relevant software; Microsoft Office Software, AutoCAD, Inventor, Revit, Procore, Bluebeam, Adobe, Power BI, and ACC is preferred., • Experience with process design and engineering in a design-build or EPC setting., • Exposure to sustainability-focused initiatives such as water reuse, energy recovery, or nutrient capture is a plus.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 20%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar: Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Location: US-FL-Jacksonville *Posted salaries may not be accurate. Sponsorship is not offered. Overview: The ESS Services Engineer reports to the Service Lead and is tasked with supporting the Operations and Maintenance (O&M) of installed ESS projects. During project execution, the ESS Services Engineer is responsible for ensuring the project is readying for transition to Long Term Service Agreement (LTSA). The ESS Services Engineer supports closing out the list of engineering actions and punch list items after delivery of the project. The ESS Services Engineer also provides support to technicians, Service Managers, and Authorized Agents (AA) throughout the LTSA period and O&M phase. The ESS Services Engineer is expected to have experience in optimization of DC and AC coupled Battery Energy Storage System (ESS), System integration, and ESS controller design. Responsibilities: • Validates project documentation with project engineering team. Reviews and familiar with design specifications, block diagrams, system interfaces, and other applicable documentation during the course of his/her duties to facilitate the highest level of support can be provided to the customer and the services team., • Provides expertise and technical interface with customer/subcontractor for supporting troubleshooting, diagnosis, and root cause analysis of all issues that arise during operations, • Understands the interfaces of the BESS, PCS, PPC/SCADA, and PMS. Interprets single line diagrams, schematics, and validates switching procedures, • Familiar with project specific requirements and customer specifications. Reviews and validates specifications, design, qualification and certification of BESS integration (Battery + PCS/MVPS + PMS) projects after transition to O&M and to include augmentation if necessary. Understands system level development of power systems, power conversion systems, and plant management/SCADA systems. Familiar with industry standards for integrating battery systems with power conversion and controls systems., • Defines and implements action plans and creates work instructions for technicians, customers, and Authorized Agents including subcontractors to perform work onsite., • Provides support to the bid and proposal teams for technical questions that arise during the bid phase. Provide feedback concerning projects in operations to the bids and proposals team to help improve the bidding process., • Applies technical policies, best engineering practices, and lessons learned and shares them within the engineering, services, and product teams. Submits JIRA tickets for analysis and product improvement, • Coordinates annual performance tests and generates test reports to provide to the customer., • Provides engineering support emphasizing safety and customer satisfaction. Develops technical service bulletins and leads RCA., • Bachelor's Degree in engineering area of study, • Minimum 8 years professional experience with Systems and/or Electrical Engineering, • Knowledge in power systems, battery systems and controls, • Business understanding in electricity, power generation, energy, • Travel required an estimated 50%

Job DescriptionPosition Summary The Manufacturing Engineer will be responsible for developing, implementing, and optimizing manufacturing processes for aerospace components and assemblies. This role ensures compliance with industry standards, customer requirements, and internal quality systems while driving efficiency, cost reduction, and continuous improvement initiatives. Key Responsibilities • Process Development & Optimization, • Design and implement manufacturing processes for aerospace parts and assemblies., • Develop detailed work instructions, tooling requirements, and process flow documentation., • Optimize production methods to improve efficiency, reduce waste, and maintain quality., • Quality & Compliance, • Ensure adherence to AS9100, FAA, and other applicable aerospace standards., • Collaborate with Quality Assurance to resolve non-conformances and implement corrective actions., • Maintain compliance with safety and environmental regulations., • Continuous Improvement, • Lead Lean Manufacturing and Six Sigma initiatives to enhance productivity., • Identify opportunities for automation and advanced manufacturing technologies., • Support cost-reduction projects without compromising quality or safety., • Technical Support, • Provide engineering support to production teams for troubleshooting and process improvements., • Assist in root cause analysis for manufacturing issues and implement permanent solutions., • Support new product introduction (NPI) and transition from design to production., • Documentation & Reporting, • Prepare and maintain process documentation, including PFMEA, control plans, and work instructions., • Generate reports on process performance, efficiency metrics, and improvement projects.Qualifications, • Education: Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, Aerospace Engineering, or related field., • Experience: 1+ years in manufacturing engineering, preferably in aerospace or defense industries.Preferred Qualifications, • Experience with ERP/MRP systems (SAP, Oracle)., • Familiarity with additive manufacturing and advanced aerospace materials. This is a Contract to Hire position based out of Jacksonville, FL. Pay and Benefits The pay range for this position is $70000.00 - $100000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Dec 24, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Department: EHS Job Title: EHS Engineer JOB PURPOSE The EHS Engineer’s purpose is to manage and lead the EHS functions for Jinko Solar U.S. Industries. The EHS Engineer will be responsible for the development and implementation of EHS compliance programs designed to ensure that compliance related responsibilities are met on a timely basis. JOB DUTIES & RESPONSIBILITIES • Develop and continuously improve all methods, processes, training, and all specific Programs and Procedures associated with EH&S compliance., • Ensure compliance with all applicable rules and regulations for all federal and local regulations, including but not limited to EPA, NFPA, OSHA, ANSI, ISO 14001:2015, and ISO 45001:2018., • Develop, measure, identify, track, analyze, and report EH&S statistics and trends., • Implement corrective actions, working with personnel to address any identified concerns., • Ensure that effective EH&S programs are implemented to address compliance as well as methods for improvement. Assign EH&S personnel to project teams., • Direct responsibility for the Waste Management Program includes obtaining required permits, preparing reports, maintaining records, and preparing budgets., • Ensures procedures are in place for sampling, waste characterization, labeling, preparation of hazardous waste for shipment, signing of hazardous waste manifests., • Ensures compliance with all local and federal rules and regulations, documents inspections, and improvement methods are in place., • Prepare, facilitate, and arrange appropriate resources to ensure that all EH&S training needs are addressed and that training requirements are fulfilled and documented., • Direct responsibility of the on-site security staff handled by third-party contractors., • Coordinate with plan security guards, visitors related to EH&S programs., • Be an effective communicator with all Jinko Solar, USA team members., • Implements the goals and performance objectives set by the Manager for the Environmental, Safety, and Health department; and ensures quality control measures are integrated into all aspects of the manufacturing process. Training – Manages health and safety training delivery across Jinko Solar, USA production facility. Tracks changes in legislation and develops training programs under the new legislation. Maintains effective communications with colleagues both in/outside the department. Managing Staff – Sets Safety performance goals with staff members and ensures that goals are directly linked to Safety Department goals for the year. Provides feedback to staff throughout the year promptly. Addresses performance issues within the team and creates a climate of recognition and appreciation for work performed well. Planning, Budgeting, and Work Improvements – Develops budget forecasts and plans for the upcoming year with the operations manager. Anticipates future costs and expenditures for work-unit. Manages and stays within current budget levels. Communicates staffing level needs to Director. Communications – Engages staff within the team to find ways to find work improvements and reduce costs. Establishes a Safety Committee of representatives from all levels of the organization to monitor, set policy, and ensure a Safe and Healthy work environment is maintained for the Jinko Solar worksite. All other duties assigned by the Operations Manager and Jinko Solar Corporate, Ltd. Safety. KEY REQUIREMENTS & COMPETENCIES • Excellent communication., • Ability to Set Safety Guidelines, Policies & Procedure Improvements., • Planning and organization., • Dependability., • Training and coaching., • Problem solving., • Data collection and analysis., • Adaptability., • Microsoft Office – Excel, Word, PPT., • A bachelor's degree in Industrial Engineering or equivalent., • Certification in Safety, O.S.H.A. compliance – A.S.P., C.S.P., C.S.H.O. certifications preferred, • At least five years of experience in manufacturing operations, with manufacturing, in a "clean" environment preferred., • Familiar with all machinery utilized in the manufacturing process and physical safeguards used in their function., • Two years of supervisory experience., • Demonstrated excellent people skills., • Excellent organizational skills, • The ability to work with a diverse team without playing favorites or politics., • Excellent Communicator., • "Leadership mentality" to be able to get work done through "others," by "example," not by the directive., • "Hands-on" team builder with a passion for people and excellence. PLACE OF JOB IN THE ORGANISATION STRUCTURE: Reporting to General Manager.

Job Description Location: Candidates in the Columbus, Ohio and Jacksonville, Florida area are preferred; remote employment is also possible for candidates in Indiana, Michigan, North Carolina, Texas, and Alabama. Compensation Range: $110,000 – $120,000, commensurate with experience and qualifications Are you a passionate developer who thrives in Agile environments and loves working with modern tech stacks? Join our team as a Software Engineer IV and help us build scalable, cloud-native applications that make a real impact. What You’ll Do As a key contributor, you’ll: • Work closely with the Program Manager, Business Analyst, and the Agile team to collaborate on proof of concepts, industrialization of the concepts and the delivery of the concepts in a digital framework for quick release cycle to achieve targeted Minimal Viable Product (MVP)., • Using modern technologies including web frameworks, SQL Server, Azure, iPaaS and DevOps tools, design, and develop enterprise applications. Design and develop business applications and system solutions including test plans, unit testing, safety and soundness testing, regression testing and system integration testing following enterprise architecture, design, and coding standards., • Fully support and participate in all stages of the Agile methodology including daily standup, story planning, backlog grooming, deliverables, and demonstrations. Provide honest and critical feedback during all stages of the process to ensure better development practices and successful solution implementations., • Provide recommendations to the team for environmental/architectural changes that will increase the stability or improve the performance of Corporate One’s systems and applications., • Fully document necessary aspects of the applications and processes for easy maintenance, transition, and governance needs., • Work closely within and outside of the team for ideation, vendor evaluation and research work; keeps abreast of new technologies and trends to support innovation., • Support the company’s in-house developed applications. Restore functionality to applications that have failed and documents resolutions. What We’re Looking For: • 3 years of related experience with enterprise application development and all phases of software development lifecycle., • 4 years of experience with application software solution design and implementation., • Strong practical knowledge of Agile/Scrum methodology and full participation in Agile ceremonies. Qualifications: • Bachelor’s degree in Computer Science, Engineering, or related field (or equivalent experience)., • Hands on experience with Microsoft.Net, C#, ASP.NET, React.js, SQL Server, Azure, Web Services, REST or RESTful services., • Experience with iPaaS/Enterprise Service Bus Integration Architecture, CSS, HTML, JQuery, JavaScript, is preferred. Experience with Flowgear is a plus. About Corporate One: We are a leading wholesale financial services provider to more than 700 credit unions nationwide. For over 70 years, we’ve delivered innovative investment, funding, and payment solutions to help credit unions and their communities thrive. Alongside our CUSOs – Lucro Commercial Solutions and Accolade Investment Advisory – we’re committed to empowering our members’ success. Why Join Us? • Organizational Strengths: One of the nation’s largest and most progressive corporate credit unions with more than $6.0 billion in assets and an average staff tenure of 10+ years, • Competitive Compensation & Benefits: Generous 401(k) matching, quality health and ancillary benefits, • Work-Life Balance: 4 weeks of PTO starting year one, 11 paid holidays, and paid parental leave, • Learning and Development: Access to online training, mentoring, and business coaching, • Fun Perks: Tuition reimbursement, pet insurance, and year-round events Ready to take the next step? Apply now or share with someone who’d be a great fit! Corporate One Federal Credit Union is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, disability, age, or veteran status.

Job Description Job Summary As an Electronics Engineer, you will play a crucial role in designing, developing, and testing electronic systems and components for aerospace applications. You will collaborate with cross-functional teams to ensure high-quality, reliable, and innovative solutions that meet industry standards. Key Responsibilities • Design and develop electronic circuits, systems, and components for aerospace applications., • Conduct testing, troubleshooting, and validation of electronic systems., • Work closely with mechanical, software, and manufacturing engineers to integrate electronic solutions., • Ensure compliance with industry regulations and safety standards., • Utilize simulation tools and CAD software for circuit design and analysis., • Support new product development and continuous improvement initiatives., • Provide technical expertise in resolving design and production challenges., • Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field., • 2+ years of experience in electronics design and development (aerospace experience preferred)., • Proficiency in PCB design, embedded systems, and circuit simulation tools., • Strong understanding of analog and digital electronics., • Experience with microcontrollers, and signal processing., • Knowledge of FAA and aerospace industry standards., • Excellent problem-solving and analytical skills. Job Type & Location This is a Contract to Hire position based out of Jacksonville, FL. Pay and Benefits The pay range for this position is $70000.00 - $100000.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Dec 31, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description *Posted salaries may not be accurate. Sponsorship is not offered. Overview: As a Process Engineer, you will be responsible for developing and implementing process strategies, managing process resources, optimizing current processes, and maintaining process documents. Ultimately, your job is to maintain the efficiency of production in order to reduce costs. As a process engineer you should have experience in process design, excellent technical skills, and high-level analytical skills. You will be able to analyze a process system and implement simple yet effective changes to boost production. Responsibilities: • Meet with production managers to assess existing processes., • Draft process ideas to reduce costs and improve production rates., • Perform risk assessments and optimization tests., • Design and test process upgrades and new process systems., • Ensure processes comply with safety and quality standards., • Perform process simulations and troubleshoot issues., • Develop routine and best practices to ensure product quality., • Develop standardized operating instructions for the upgrades process., • Bachelor's degree in engineering., • Proven work experience as a process engineer., • Experience with process simulations and standard operating procedures., • High-level knowledge of process engineering software systems., • Experience working with CAD and AutoCAD., • Advanced technical skills., • Analytical thinker., • Familiarity with state health and safety regulations.

Job Description The Process Controls Engineer is responsible for leading the design, implementing, and optimizing control systems to ensure the efficient and safe operation of our diverse food and beverage manufacturing operations. This role requires a deep understanding of system architecture design, network design, instrumentation specification and selection, control panel design, PLC & HMI application development, acceptance testing, system commissioning and start-up for production systems, with an emphasis on raw material storage, processing, packaging, finished goods storage and handling, and food safety compliance, as well as a commitment to sustainability and cost-effectiveness. You will collaborate closely with cross-functional teams to develop innovative solutions and enhance automation performance. This role requires a deep understanding of instrumentation and control strategies, sizing and specifying controls systems, coordinating electrical, mechanical, packaging and process systems with a focus on maintaining high standards of quality and regulatory compliance. Duties/Responsibilities: • Design, implement, and optimize control systems for industrial processes., • Collaborate with cross-functional teams to develop innovative process solutions., • Develop controls design for P&ID’s, equipment specifications, installation specifications, instrumentation lists, controls narratives for coordination, controls schematics, and control panel design., • Coordinate with 3rd parties for equipment engineered by others, with internal or external project team members for integration of the controls design., • Assist in identifying suppliers & subcontractors, perform technical writing aspects in bid packages for scope definition, compile technical engineering documents for bid packages., • Participate in bid-scope reviews, assist in analyzing proposals, lead design reviews of drawings & models, attend coordination meetings, review submittals, participate in factory acceptance testing., • Travel to site for technical assistance, coordinate directly with Stellar field staff and subcontractors, identify and resolve issues that arise, review installations for correctness, and revise drawings for as-built conditions., • Assist in preparing comprehensive documentation of commissioning processes, test results, and system performance., • Provide I/O checkout support, startup activities, process system testing and commissioning activities, including functional testing, performance testing, and safety testing., • Coordinate with clients and stakeholders for system handover, providing necessary documentation and training for operational staff., • Troubleshoot and resolve control system issues promptly to minimize downtime., • Maintain high standards of quality and regulatory compliance in all control system implementations., • Provide technical support and training to team members on control systems and instrumentation., • Stay updated with the latest advancements in control strategies and apply them to enhance process performance., • Ensure all projects comply with industry safety regulations and standards., • Maintain current knowledge of food manufacturing trends, regulatory requirements, and food industry-specific considerations as they relate to controls and automation., • Other duties as assigned.Required Skills/Abilities:, • Proficiency in control system design, software and instrumentation., • Strong leadership and team collaboration skills., • Thorough understanding of the food industry, process systems, & plant operations., • Familiarity of startup and commissioning processes and procedures for process systems., • Excellent analytical, problem-solving and troubleshooting abilities, capable of identifying and resolving issues., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills with ability to develop and maintain controls documentation., • Ability to work under pressure and meet tight deadlines., • Knowledge and understanding of government and industry regulations, and standards including safety as relates to food or beverage manufacturing systems., • Flexibility to work in different environments and adapt to changing project requirements including new technologies and advancements.Education/Experience:, • Bachelor’s of Science Engineering degree in Electrical, Automation, Computer Science or a related field., • Minimum of 1-7 years of experience in process controls engineer or a similar role. Relevant professional certifications and food or beverage manufacturing systems are a plus., • Strong understanding of control system architecture and instrumentation., • Experience with controls design and engineering in a design-build or EPC setting., • Experience with PLCs, HMIs, SCADA systems, and other automation tools., • Familiarity with software development life cycle and programming languages such as ladder logic, C++, or Python., • Proven track record of successfully managing control system projects from concept to completion., • Experience in calibration, startup and commissioning of food or beverage process systems is preferred., • Knowledge of cybersecurity protocols related to control systems., • Knowledge of Process Controls that support recipe management and product repeatability., • Knowledge of 3A, USDA, or FDA sanitation requirements and regulatory entities., • Exposer and / or skilled in relevant software; Microsoft Office Software, AutoCAD, Procore, Bluebeam, Adobe, Power BI, and BIM / ACC is preferred.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 20%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar: Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job DescriptionHermeus is a high-speed aircraft manufacturer focused on the rapid design, build, and test of high-Mach and hypersonic aircraft for the national interest. Working directly with the Department of Defense, Hermeus delivers capabilities that will ensure that our nation, and our allies, maintain an asymmetric advantage over any and all potential adversaries. At Hermeus, we are constantly iterating and integrating. We test early and often to minimize technical and program risk. We build the test infrastructurethat supports our full range of test programs spanning development, operational and certification testing. Hermeus is seeking a Senior Propulsion Test Engineer to support the development, integration, and operation of propulsion test systems at our Florida facility. This is a hands-on, high-impact role focused on building test capabilities and executing test campaigns for next-generation hypersonic propulsion systems. You will work closely with engineers and technicians across multiple disciplines to design test hardware, operate complex test facilities, and ensure safe, reliable, and repeatable performance. This role is ideal for an engineer who enjoys building, troubleshooting, and operating large-scale test systems and wants to be directly involved in advancing high-Mach technology. Responsibilities: • Design, develop, and maintain propulsion test stands and associated infrastructure, including mechanical systems, fluid systems, and instrumentation., • Execute propulsion and subsystem test operations, including planning, integration, checkouts, and post-test analysis., • Support the maintenance of existing test equipment, data acquisition systems, and control hardware., • Generate and review detailed test plans, procedures, and safety documentation., • Collaborate with propulsion, GNC, software, and vehicle systems engineers to support test article integration and operation., • Analyze test data to validate performance, identify anomalies, and recommend design or procedural improvements., • Participate in system readiness reviews, safety walkdowns, and test preparation activities., • Work with technicians to install hardware, route fluid lines, connect instrumentation, and configure control systems., • Support root-cause investigations and corrective actions when test failures or anomalies occur., • Drive continuous improvements in test operations, safety, and reliability processes. Minimum Requirements:, • Bachelor’s degree in Mechanical, Aerospace, or a related Engineering discipline., • 7+ years of experience in propulsion test, mechanical systems, or fluid systems design and operation., • Hands-on experience working with high-pressure, cryogenic, or high-temperature fluid systems., • Proficiency in reading and creating P&IDs and mechanical drawings, • Experience with data acquisition and control systems., • Strong understanding of system safety practices and operational discipline in hazardous test environments., • Excellent analytical, troubleshooting, and problem-solving skills., • Effective communicator who can work independently within a fast-paced, cross-functional team., • Valid driver’s license and ability to work extended hours or weekends as required by test schedules., • U.S. citizenship and ability to obtain and maintain a security clearance. Preferred Skills and Experience, • Master’s degree in Aerospace, Mechanical, or related field., • Experience with air-breathing or rocket propulsion systems (turbomachinery, ramjet, scramjet, or hybrid systems)., • Familiarity with ASME B31.3, ASME BPVC Section VIII, and pressure vessel/facility standards., • Experience with command and control systems, PLCs, and test automation., • Background in instrumentation calibration, dynamic data collection, and signal processing., • Experience with facility commissioning or large-scale test system buildouts., • Hazardous operations or pyrotechnic system experience. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description EnSafe is accepting applications for an Environmental Remediation Associate Engineer position located in either Jacksonville, Tampa, or Pensacola, FL. Candidates must be willing to work at one of the Florida offices listed. Relocation assistance is available to meet this expectation. EnSafe is an employee-owned global environmental consulting and engineering firm. We strive to provide innovative, creative solutions for our clients. EnSafe specializes in custom solutions in Environmental Management and Planning, Civil Design Engineering, Environmental Restoration, Natural & Water Resources, Health & Safety, and Technology. What We Are Looking For: An experienced Environmental Remediation Associate Engineer ready to support a design team using innovative remedial technologies to address various contaminants in soil, groundwater, industrial wastewater, stormwater, and air. The right candidate will enrich our team of engineers and scientists in providing field and office support and solutions to address contaminants such as PFAS, 1,4-dioxane, chlorinated solvents, petroleum, and heavy metals for sites regulated under state, CERCLA, and RCRA laws. Joining our team means immersing yourself in an environment that nurtures creativity, encourages collaboration at all levels, fosters a supportive culture, and facilitates professional development. What You Will Be Doing: • Supporting remedial and process engineering projects and teams to fill data gaps, design, construct, operate, and optimize systems., • Planning and performing assessments, pilot tests, construction oversight, and remedy O&M., • Evaluating data from aquifer tests, pilot studies, bench testing, sampling events, and modeling to develop remedial strategies., • Preparing design basis, technology feasibility analyses and selection, and design plans, specifications, and reports., • Communicating with regulatory personnel and permitting agencies to ensure compliance with project requirements and applicable regulations., • Bachelor’s degree from an ABET-accredited college in Civil, Chemical, Mechanical, or Environmental Engineering., • 4-8 years of relevant experience required., • P.E. preferred, EIT required., • Strong knowledge of FDEP, CERCLA, RCRA, and other environmental regulations, legislation, and SOPs., • Hands-on experience with remediation technologies and O&M for soil, groundwater, stormwater, industrial wastewater, and air for a wide range of contaminants., • Experience with remedial system instrumentation and controls, and remote telemetry a plus., • Strong consulting, problem-solving, and leadership skills., • A valid driver’s license., • Ability to travel overnight. Why Join EnSafe? About EnSafe EnSafe began as a two-person firm in 1980, navigating complex regulatory compliance issues on behalf of our clients. We nurture our people with opportunities for growth and development. We build enduring, trustworthy relationships with each of our clients, focusing on high ethical and safety standards. We create this reputation by attracting and retaining high-quality individuals for the long term. At EnSafe, we are committed to cultivating a diverse and inclusive workplace. If you’re excited about this role but your experience doesn’t align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles at our company. EnSafe is committed to being an EEO employer and all qualified candidates will receive consideration without regard to race, color, religion, national origin, citizenship, age (except for bona fide occupational qualifications), sex, disability, sexual orientation, gender identity, marital status, military or veteran status, any other status protected by federal, state, or local law, or association with a person on the basis on one or more of the foregoing. Check us out on the web at #LI-MJ1 #LI-Onsite

Job DescriptionAn experienced Design/Design-Build Project Manager will add critical bench strength at GMHILL to meet our growing backlog. Founded in 2004, G.M. Hill Engineering, Inc. (GMHILL) is a fast-growing woman-owned small business (WOSB) headquartered in Jacksonville, FL, and has offices in Alexandria, VA, Virginia Beach, VA, Tallahassee, FL, Panama City, FL, Beaufort, SC, Houston, TX and Thomasville, GA. GMHILL has nearly 20 years of experience providing clients with a wide range of engineering, architecture, and construction services. GMHILL’s team of professionals bring the experience and proven past performance to provide full-service building solutions that few WOSB firms can match. We have recent Prime experience in facility assessments and building inspections; developing and reviewing D/B RFP’s; planning; architecture; engineering; construction management; general construction; design-build for federal defense and civilian agencies; state and local governments. GMHILL’s varied A/E, construction management, and design-build experience and lessons learned, provides comprehensive designs, and delivers more complete solutions that result in lower risk and better value as proven by our CPARS, safety ratings, and repeat business. Current project loads throughout the GMHILL area of operations demands the expansion of field staff at all levels. We are seeking candidates with at least 10 years of experience as a Design/Design-Build Project Manager with experience delivering on D/B SATOC/MATOC/MACCs for federal Defense and Civilian Departments. Position Summary A GMHILL Design/Design-Build Project Manager leads and motivates a multi-discipline team of architects, engineers, and constructors whose goal is to serve our clients and develop workable solutions to meet our client's needs. Responsibilities include planning, organizing, coordinating, monitoring, and administering the work to successfully complete the project in budget, on time, and in accordance with the company’s quality and safety standards. You will be expected to develop strong client relationships to facilitate successful, timely, profitable projects and repeat business. Design/Design-Build Project Managers are assigned several projects at a time, the number are determined by the size and scope of the project. Given your experience, you may participate in the selection, pursuit, schedule, and budget development for construction projects across a wide variety of vertical markets and performance contracting entities. Project types include design, design/build, design/bid/build, general construction, CM, CMaR and self-performing general trades work. From capture to closeout, all GMHILL Project Managers contribute to the successful placement of projects throughout the CONUS and beyond. This position will report to the Director of Design.Key Tasks Following is a general list of tasks falling into the areas of responsibility of the Design/Design-Build Project Manager. It attempts to present a comprehensive, but not complete, listing of assignments that may be undertaken. • Communicate with client to obtain expectations, create service deliverables, and obtain client feedback throughout the course of the project., • Interpret and explain plan intent, contract terms, and requirements to administrative and project staff, workers, and subcontractors., • Determine project staffing requirements for design team, Superintendent, QAQC, and SSHO on Design-Build projects assigned. Coordinate GMHILL trade labor with home office to schedule and dispatch workers to construction sites., • Solicit and review subcontractor scopes of work, prepare contracts and negotiate revisions, changes, and additions to contractual agreements with architects, consultants, clients, suppliers, and subcontractors., • Assist Senior Cost Estimator in the bid process through the solicitation of trade contractors, development of general conditions estimates, self-performing trade takeoffs and schedule refinement., • Schedule the project in logical steps and budget time required, managing the project within the prescribed period of performance., • Demonstrate capability and experience in managing and performing projects in a fast-paced environment as POC from design through closeout of the project., • Prioritize, plan, organize, assign, direct, and oversee work on multiple concurrent projects integrating activities concerned with the design, construction and maintenance of structures, facilities, and systems., • Inspect and review projects to monitor compliance with plan & spec, building and safety codes, and other regulations., • Prepare weekly SITREPs to report safety, schedule, quality, progress, and client issues to the executive team., • Communicate with on-going presentations and project meetings outlining project updates, changes, and status of milestones to client, staff, and team., • Prepare budgets, proposals, contracts, and provide support during the negotiation of contract fees., • Obtain all necessary licenses, permits and agency approvals to start the work., • Evaluate job specifications and work with Superintendent to develop appropriate construction means and methods and determine cost-effectiveness of plans, • Receive and review job cost reports and develop EAC reports and monthly invoices for approval, submission., • Develop and implement project quality control programs., • Plan, strategize and initiate action with supervisory personnel, owners, contractors, and design professionals to overcome delays, bad weather, or emergencies and quickly resolve issues that adversely affect the project’s progress., • Investigate damage, accidents, or delays at construction sites, to ensure proper procedures are being carried out., • Support field personnel and advocate site safety., • Support senior staff across all divisions and geographies as needed to ensure the success of the company., • Other duties as assigned and required of the Project Manager to successfully deliver the project., • Participate in the opportunity selection and pursuit process, assisting the marketing team with technical writing, schedule development, project planning required in technical pursuits and client interviews., • May participate in proposals, presentations, and business development activities., • Other duties as assigned Knowledge, Skills, and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Extensive knowledge of practical application of architecture and engineering science and technology as it applies to the design of buildings including architectural, civil, structural, mechanical, electrical, fire protection, building sciences, sustainability, and plumbing systems., • Knowledge of design techniques and tools involved in the production of technical plans, drawings, and computer models., • Knowledge of the rules and regulations that govern a particular market segment such as Federal Civilian, Military, State/Municipal, and/or PK-12/Higher Education work., • Knowledge of business and management principles involved in strategic planning, resource allocation, leadership technique, production methods, and coordination of people and resources., • Knowledge of project management tools including pert charts, and gantt charts., • Self-starter, highly motivated, enthusiastic, able to provide design and construction rigor while operating within contractual scope, budget, and schedule requirements for project deliverables on multiple concurrent projects, • Customer Service – able to personally provide high level of interactive service to targeted customer base/market, building relationships, and acting as internal company advocate, • Team Orientation & Interpersonal – highly motivated, passionate, and creative team-player with ability to develop and maintain collaborative relationships with all levels within and external to the organization, • Communication – able to effectively and persuasively express self verbally and in writing, using correct language and grammar in a professional, diplomatic, and tactful manner, • Organization & Time Management – able to work independently with minimal supervision, planning, scheduling, and organizing professional schedule to complete actions within established deadlines, handling multiple priorities with strong attention to detail, • Leadership capability, interpersonal skills, and keen discernment with ability to train, develop, coach, and mentor others, • Commitment to quality, safety, and teamwork at all levels within the organization., • Keen desire to excel within and for the benefit of the company., • Must be able to read and interpret complex project blueprints/plans and specifications; to include site/civil, structural, architectural, mechanical, and electrical drawings., • Must be able to pass background check, drug screen and federal security clearance processes. Supervisory responsibilities: • This position may have supervisory responsibilities. If supervisory responsibilities exist, the individual must mentor subordinate staff, develop performance reviews, and establish goals. Education, Training, Certificates, Licenses, and Registration Requirements: • Bachelor of Science degree in Engineering, Architecture, or Construction Management, • Master’s degree preferred, • Minimum 10 years of experience in increasingly responsible positions. Minimum of 7 years demonstrated experience in Design/Design-Build Project Manager and demonstrated record of project success on work valued from $1M to $15M+, • Federal project and task order experience (Defense and/or Civilian Agency), preferred, • Professional Engineer license (PE) or Registered Architect (RA) required. PMP and LEED AP BD+C, certification a plus, • Proficient with industry standard software such as ProCore, MSOffice, Excel, Word, MS Project & Outlook. Timberline experience is highly desired., • A valid driver’s license is required., • OSHA 10, OSHA 30 certifications and ARC First Responder Course completion desired, • USACE Certified Quality Manager certification desired, • The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job: • The ability to regularly sit, stand, walk, talk and hear, • The ability to frequently use hands to finger, handle or feel, • The ability to occasionally climb, balance, stoop, kneel, squat, or reach, • The ability to frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • The ability to walk terrain and surfaces that may be far, uneven, or temporary • Ability and willingness to travel throughout the operational regions, • Strong commitment to safety and exceptional safety record Other: U.S. Citizenship and ability to obtain basic security clearance required. Must be able to read, write and speak English fluently. Disclaimer: This is not to be an exclusive list of all responsibilities, duties, and skills required of the person in this job. G.M. Hill Engineering, Inc. (GMHILL) is an Equal Opportunity Employer. GMHILL considers all applicants for employment without regard to race, color, sex, national origin, religion, age, physical or mental disability, family responsibility, marital status, sexual orientation, political affiliation, veteran's status or any other legal protected status. The candidate selected must pass a thorough background check (including e-verify) and comply with GMHILL’s Drug and Alcohol policy adhering to pre-employment, random, post-accident and for cause testing. Powered by JazzHR Vin89URHuG

Job Description Job Title: Facility Engineer Department: Facilities Management Overview: The Facility Engineer is responsible for supporting the design, maintenance, and improvement of building infrastructure, including HVAC systems, control systems, and facility operations. This role involves providing technical assistance in planning and managing building projects, ensuring compliance with safety regulations, and optimizing facility operations. The Facility Engineer will report to the Assistant Facilities Manager and collaborate with cross-functional teams to maintain and enhance facility performance. Job Duties & Responsibilities: • Report to the Assistant Facilities Manager and assist in duties of senior engineers and project managers as required., • Provide expertise on building HVAC system design, control systems, operations, and maintenance., • Offer technical assistance in developing, planning, and managing building design and construction projects., • Prepare facility project plans, preliminary designs, and cost estimates under guidance., • Assist in reviewing drawings, specifications, and procedures for accuracy and compliance., • Conduct construction inspections to ensure conformance to requirements., • Support project documentation, including scope-of-work, purchase requisitions, and cost tracking., • Assist in project scheduling, budget tracking, and process improvements., • Manage smaller-scale construction projects, office layouts, and furniture/equipment relocations., • Oversee and supervise junior team members as needed., • Ensure compliance with all safety regulations and workplace best practices. Education & Experience: • Bachelor's degree in Engineering or a related field., • Proficiency in Microsoft Outlook, Word, Excel, PowerPoint, and Microsoft Project., • Experience with AutoCAD or SolidWorks is a plus., • Excellent organizational and time management skills., • Strong verbal, written, and presentation communication skills., • Ability to collaborate with cross-functional teams and manage projects effectively., • Work involves a combination of indoor and outdoor activities in varying conditions (hot, cold, wet, humid)., • Tasks may require standing, walking, climbing ladders/stairs, balancing, bending, kneeling, and lifting up to 50 pounds., • Operation of material handling equipment (forklift, hoist, cranes, etc.) may be required., • Use of personal protective equipment (PPE), including safety glasses, steel-toed shoes, gloves, and hard hats, is necessary., • Travel between company locations may be required., • Ability to work in both office and manufacturing environments., • Reports to the Assistant Facilities Manager., • Works closely with senior engineers, project managers, and cross-functional teams., • May oversee or guide junior employees within the Facilities Management department.

Job Description The Packaging Engineer is responsible for the development and implementation of advanced packaging solutions that meet the needs of our client’s diverse product lines. This role requires a deep understanding of packaging materials, processes, equipment, and technologies, as well as a commitment to sustainability and cost-effectiveness. The Packaging Engineer will work closely with cross-functional teams, including product development, marketing, and manufacturing, to ensure that all packaging solutions are innovative, functional, and aligned with the company's strategic goals. Duties/Responsibilities: • Create complex calculations to determine size and quantity of packaging equipment required based on project production goals., • Develop process flow diagrams, P&ID’s, and equipment layouts to meet customer specifications, throughput rates and sales goals; ensure designs and layouts conform to specifications, code requirements, and food safety requirements., • Responsible for creating or obtaining Packaging Specifications; Materials, Rates, Sizes, OEE, Compliance., • Develop specifications for packaging equipment and installation., • Assist in estimating equipment costs (design and material) for specified process, seek alternative methods that may reduce cost, review activities to ensure design stays within budget., • Coordinates with 3rd party engineering, architectural, OEM, and client resources., • Troubleshoot new and existing packaging line issues involving equipment, controls, designs, materials and processes and provide creative, timely, and cost-effective solutions., • Provide on-site project support to assist in accurate packaging equipment installation, startup and commissioning., • Commit to sustainability and cost-effectiveness in all packaging solutions., • Collaborate with cross-functional teams, internal and external, including project management, engineering, design, product development, marketing, and manufacturing., • Ensure all packaging solutions are innovative, functional, and aligned with company strategic goals, • Other duties as assignedRequired Skills/Abilities:, • Knowledge of packaging materials, processes, and technologies., • Proficiency in CAD software and/or other design tools, 3D software a plus., • Strong problem-solving and analytical skills., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Familiarity with industry regulations and standards., • Flexibility to work in different environments and adapt to changing project requirements.Education/Experience:, • Bachelor’s degree in Packaging Engineering, Mechanical Engineering, or a related field., • Experience with capital projects, either cost reduction initiatives or new line installation., • Minimum of 2-5 years of experience in packaging engineering or a related field., • Experience in AutoCAD 2D or a 3D design software is preferred., • Familiarity with industry regulations and standards.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 25%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job DescriptionJob Description Summary: The Integrated Solutions organization within Digital Electronics is responsible for ensuring Wabtec products and external systems work together as a solution that reliably achieves customer objectives. This is accomplished by working across business units within Digital Electronics to understand and document the solution requirements, establish, and document interface points, flow down requirements, and validate the final solution. The Solutions Systems Engineer for DE’s Integrated Solutions team will be responsible for the solution stewardship from concept development to solution level requirements and their flow down, Solution platform and architecture. Will lead in developing the technology road maps at the solution level, lead in development of robust engineered solutions for the railroad industry with highly cohesive and loosely coupled internal and external constituent systems meeting the customer requirements with a strong FPY. Duties and Responsibilities: The Solutions Systems Engineer will collaborate and work closely with the individual product’s systems engineering team members and be responsible for • Reviewing Customer requirements or request for information (RFI) or requests for proposal (RFP) to elicit the solution level requirements, • Developing the solution concept and architecture that aligns with the customer request, working with the constituent product teams, • Being a consultant through the individual constituent product’s concept development and reviews, estimation process and schedule/plan development, • Technical responses to RFP/RFIs through the pre-contract phase, • Creating Solution level requirements agnostic to the project, their flow down and traceability through the constituent products and their subsystems, • Solution architecture and design agnostic to the project, • Interface development and/or management for the various interfaces between the internal constituent products as well as the external products/systems., • Being a consultant through the individual constituent product’s detail design and development process, • Patterning with the integration test engineers to drive the Solution Integration Test plan and procedures, • Solution Architecture and Design Change management through the business change management processes., • Partnering with the individual constituent product teams in field testing and field monitoring of the solutions at the customer, • Providing technical leadership for all technology issue resolution that might arise across functional teams in assigned work streams, • Lead the efforts in generating the customer requirement compliance matrices, • Remain current in the state of art within own technical specialty for new products introduction activity, performance improvements, cost reductions and problem resolutions, • Identify technical risks of design and implementation of new solutions and applications, and help define mitigation for the risks, • Act as a technical mentor and coach to the other engineers across the DE organization to help build a strong pipeline of talent, • Closely work with the senior management on organizational initiatives around culture and speed, embrace the initiatives to become the change agent and act as a role model for the other engineers, • Evaluate and protect the intellectual property Minimum Qualifications: • Bachelor’s Degree in Engineering, Mathematics or Computer Science from an accredited college or university (Master’s Degree strongly preferred), • Minimum of 7 years of experience in a Systems Engineering role., • Strong analytical and problem-solving skills., • Proven ability to work in a cross-functional, global environment., • Willingness and ability to travel domestically and internationally. Knowledge, Skills and Abilities: • Broad railroad experience pertaining to locomotive technologies, operations and operating practices of the railroads, and broad skill areas related to hardware, software, mechanical design as well as communications and infrastructure, • Deep technical understanding of the Digital Electronics Product Portfolio, • Systems design, operations, and integration experience, • Locomotive Systems Design Experience., • Railroad Industry Experience., • Experience working with Requirements Management Tools such as ELM, Doors, Doors Next Gen etc., • Self-starter with the ability to lead with minimum supervision., • Strong oral and written communication skills., • Strong interpersonal and leadership skills.Additional Information Our job titles may span more than one career level. The salary rate for this role is currently $89100-126900 The actual salary offered to a candidate may be influenced by a variety of factors, such as: training, transferable skills, work experience, education, business needs, market demands and work location. The base pay range is subject to change and may be modified in the future. More information on offered benefits, which include health, welfare, and retirement, are available at mywabtecbenefits.com. Other benefit offerings for this role may include annual bonus, if eligible. What could you accomplish in a place that puts People First? At Wabtec, it’s not just about a job - it’s about the impact you make. When our people come together, we’re Expanding the Possible by continuously improving what we do and how we do it - for our clients and each other. If you’re ready to revolutionize how the world moves for future generations, Wabtec is the place for you. Who are we? Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services for the freight and transit rail sectors. Drawing on more than 150 years of experience, we are leading the way in safety, efficiency, reliability, innovation, and productivity. Whether it’s freight, transit, ports, logistics, mining, industrial, or marine, our expertise, technologies, and people together – are accelerating the future of transportation. With roots that date back to George Westinghouse, Thomas Edison, and Louis Faiveley, Wabtec has always built technologies and implemented solutions for a variety of sectors that are critical to meeting the needs of customers and governments alike. Our global team of about 30,000 employees worldwide delivers performance that moves the world forward. We’re lifelong learners, obsessed with better. Learn more at . Culture powers us and the possibilities. We believe the best ideas come from a mix of experiences and backgrounds. At Wabtec, we strive every day to create a place where everyone belongs. We’re building a culture where leadership, inclusion and your unique perspective fuel progress. We’re proud to be an Equal Opportunity Employer. We welcome talent of all backgrounds, experiences, and identities, including race, gender, age, disability, veteran status and more. Need accommodation? Just let us know - we’ve got you.

Job DescriptionField Quality Engineer Position Type: Full-time, Exempt, Salary Reports to: Field Quality Manager Supervisory Responsibilities: None Location: Jacksonville, FL/Field Company Summary Stellar Energy provides state-of-the-art solutions customers build in for optimized energy performance now; and in preparation for the energy needs of tomorrow. In business for 25 years, we’ve delivered added energy efficiency and capacity to customers in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Hyperscale deployment at the best possible speed to first megawatt. All delivered with the lower emissions required to support our partners’ unique sustainability objectives. Stellar Energy specializes in a wide range of engineering and manufacturing solutions within the energy sector including turbine inlet air chilling, central utility plants, district cooling, combined heat & power systems, thermal energy storage, inlet air heating, data center chilling, and inlet air chilling for LNG facilities. Additionally, our expertise extends to start-up & commissioning, system health analysis, services, and training. Our in-house team of skilled engineers and dedicated tradespeople are the reason we are the global leader in customized solutions. Stellar Energy strives to add value to today’s energy infrastructure, achieving secure, affordable, and sustainable energy that will help to create a responsible energy economy. Job Summary The Field Quality Engineer is responsible for providing quality support during design, procurement, manufacturing, and test activities on Stellar Energy projects. The major objective of the position is to assist in the management of day-to-day quality activities to ensure the Stellar Energy fabricated modules meet client quality requirements. Essential Functions • Establish field services inspection program with appropriate procedures and forms or review and comment on contractors proposed procedure., • Support key client’s data extraction from ACC software to drive focused impactful interventions at sites and also by XFN team members in the supplying factories and offices., • Perform inspections on activities and material. Coordinate inspections by other parties. Provide third party review of destructive/non-destructive test results and data., • Assist in the supplier evaluation and selection for field process., • Witness or provide for the witnessing testing of systems and equipment including tolerance checks or other inspections as specified in the quality control inspection procedures., • Review quality specifications for project and proposal., • Verify site contractor performing all fabrication, assembly, welding to approved client requirements, and applicable code and acceptance criteria., • Initiates nonconformance reports. Shall ensure all nonconforming material is quarantined or segregated and either reworked, repaired, accepted “as is,” or scrapped based on Nonconformance Report dispositions., • Project a positive and professional image of SEA to the client through structured communications and messaging during meetings/comm’s., • Prepares for ISO 9001 and other audits., • Coordinate internal auditing activities., • Perform Root Cause Corrective Action (RCCA) with team members. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Good written and verbal communication skills, • Organizational skills, • Problem solving/analysis., • Teamwork Orientation. Work Environment This position operates mainly in a construction site and operating industrial plant environment. The employee must always comply with safety policies, practices, and procedures. Work is primarily done in the field which could be in a construction area requiring the use of earplugs, hardhat, steel-toe boots, and safety glasses. The work environment could be outdoors, hot, or cold, noisy, and/or dirty. Physical Demands This role requires the employee to be able to work effectively in a construction environment for system testing, including climbing ladders and moving around on platforms to maneuver in and around equipment. The technician must also occasionally lift and/or move up to 50 pounds. The employee must be able to see and read printed materials, speak, and comprehend verbal communication, operate a computer, travel including flying as well as drive long distances, work in confined spaces, stand for prolonged periods of time and walk on uneven surfaces. Position Type/Expected Hours of Work This is a full-time position that may require working over 40 hours in the workweek. This may include evenings, overnight, weekdays, weekends, or holidays. Travel Anticipated travel for this position is more than 75%. Required Education and Experience • Minimum of 5 years of experience in industrial QA/QC or similar projects working experience., • Experience with use of DMAIC, 8D, PDCA, MiniTab, A3’s and RCA Sampling plans, and statistical analysis., • Familiar with ISO 9001:2015 systems., • Familiarly with process control, Lean, SPC tools, Six Sigma, etc., • Basic computer skills (i.e., email, Microsoft Word, Excel, Outlook). Preferred Education and Experience • Bachelor of Science degree in Engineering or technical field from an accredited University, • QMS Auditor trained., • Manufacturing / construction experience with general mechanical equipment including pumps, chillers, heat exchangers, etc. Work Authorization Must be authorized to work in USA. Must be able to obtain a Passport. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description The Process Engineer is responsible for leading the design and implementation of solutions that meet the needs of our diverse food and beverage manufacturing operations. This role requires a deep understanding of food processing technologies, the design and delivery of production systems for food and beverage manufacturing facilities, with an emphasis on raw material storage, processing, thermal processing, mixing & blending, filling, and food safety compliance, as well as a commitment to sustainability and cost-effectiveness. The Process Engineer will work closely with cross-functional teams, including product development, marketing, engineering, architects, manufacturing, project management, and field staff to ensure that all process solutions are innovative, functional, and fully developed to include all requirements for successful operation. Duties/Responsibilities: • Design processes to achieve project goals, • Define processing steps required to make food or beverage products, handle waste or byproducts, and cleaning systems., • Calculate equipment rates, create optimal food plant layouts, and prepare block and/or process flow diagrams to ensure all flows are understood and included in the design., • Engineer process equipment & systems, • Perform process calculations, size and select equipment & components; ensure designs comply with relevant codes, standards, & sanitary practices., • Develop P&ID’s, equipment specifications, installation specifications, equipment lists, controls narratives for coordination, and coordinate 3D modeling with design., • Coordinate with 3rd parties for equipment engineered by others, with internal or external project team members for integration of the process into plant infrastructure., • Support procurement of equipment & installation packages, • Assist in identifying suppliers & subcontractors, perform technical writing aspects in bid packages for scope definition, compile technical engineering documents for bid packages., • Participate in bid-scope reviews, assist in analyzing proposals, lead design reviews of drawings & models, attend coordination meetings, review submittals, participate in factory acceptance testing., • Support installation of process equipment, • Review installation submittals and participate in subcontractor coordination meetings., • Travel to site for technical assistance, coordinate directly with Stellar field staff and subcontractors, identify and resolve issues that arise, review installations for correctness, and revise drawings for as-built conditions., • Startup & commissioning of process equipment, • Assist in preparing comprehensive documentation of commissioning processes, test results, and system performance., • Assist in process system testing and commissioning activities, including functional testing, performance testing, and safety testing., • Coordinate with clients and stakeholders for system handover, providing necessary documentation and training for operational staff., • Maintain current knowledge of food manufacturing trends, regulatory requirements, and food industry-specific considerations., • Other duties as assigned.Required Skills/Abilities:, • Strong leadership and team collaboration skills., • Thorough understanding of the food industry, process systems, & plant operations., • Familiarity of startup and commissioning processes and procedures for process systems., • Excellent analytical, problem-solving and troubleshooting abilities, capable of identifying and resolving issues., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Knowledge and understanding of industry regulations, and standards including safety as relates to food or beverage manufacturing systems., • Flexibility to work in different environments and adapt to changing project requirements.Education/Experience:, • Bachelor of Science Engineering degree in Chemical, Manufacturing, Mechanical, or a related field., • Advanced degrees or certifications in continuous improvement methodologies are advantageous., • Minimum of 1-7 years of experience in food or beverage manufacturing systems. Relevant professional certifications are a plus., • Experience in calibration, startup and commissioning of food or beverage process systems is preferred., • Knowledge of Ingredients and their reactions to heating, cooling, mixing, blending, pumping., • Knowledge of Process Controls that support recipe management and product repeatability., • Knowledge of 3A, USDA, or FDA sanitation requirements and regulatory entities., • Skilled in relevant software; Microsoft Office Software, AutoCAD, Inventor, Revit, Procore, Bluebeam, Adobe, Power BI, and ACC is preferred., • Experience with process design and engineering in a design-build or EPC setting., • Exposure to sustainability-focused initiatives such as water reuse, energy recovery, or nutrient capture is a plus.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 20%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Automation and Controls Engineer Position Type: Full-time, Exempt, Salary Reports to: Director of Automation and Controls Supervisory Responsibility: None Location: Jacksonville, FL – Headquarters Company Summary Stellar Energy provides custom power augmentation and energy plant solutions for power generation and utilities, liquefied natural gas (LNG), data center, biopharma and other markets. Stellar Energy’s innovative solutions include turbine inlet air chilling, inlet air conditioning (heating and cooling), evaporative cooling, direct contact air chilling, thermal energy storage, district cooling and central utility plants. The company’s experience spans more than 20 years and stretches across the globe, with offices in the United States, Asia and the Middle East and North Africa (MENA) region. Summary Objective As a member of the technical staff, the Automation and Controls Engineer is responsible for the design and implementation of control systems for automated TIAC (Turbine Inlet Air Cooling) Plants, CHP, Mission Critical and District Cooling Plants. This includes specification reviews; development of design documents to meet specification requirements, component selection to meet process and client requirements; PLC or other intelligent control device configuration; design reviews; coordination with other engineering disciplines, client and fabrication personnel for complete system production, installation, and successful commissioning. Essential Functions • Manage and direct controls designer technical workload., • Meet with client and internal project teams to define applications and produce functional specification documents., • Select system controls components and generate bills of material for equipment procurement., • Configure custom PLC programs for real-time control of automated equipment and collection of diagnostic and production data., • Develop application programs to control automated equipment based upon specific electrical and mechanical system design as well as operational requirements., • Create application programs for Human Machine Interface application., • Configure network interfaces for devices such as network I/O, variable speed drives, chillers and MCCs., • Conduct in-house preliminary testing and onsite acceptance testing of the system at the customer’s facility., • Interact with other engineering disciplines, control panel fabricator, control system installer, and site commissioning personnel., • Provide technical support to sales and marketing for bids and proposals, such as specification review, device layout, schematic and control panel design, communication architecture, and system costing data., • Provide customer training and support. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Technical Capacity., • Problem Solving/Analysis., • Good written and verbal communication skills. Supervisory Responsibility This position does not have supervisory responsibilities. Work Location This position will work out of our Main Office in Jacksonville, FL. Work Environment Majority of work is performed in an office environment. Regular trips to the Fabrication Shop and job sites for startup, commissioning, and support may be necessary. Generally, these trips will require the use of personal protective equipment such as safety glasses, steel-toed boots, and head protection. Physical Demands While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5 p.m. Occasional nights or weekend work may be necessary to meet a project deadline. Travel Anticipated 30% travel for this position. Both local day travel and extended duration periods for sitework may be required. Required Education and Experience. • Bachelor of Science degree in Electrical Engineering, Electronics Engineering Technology, or relevant disciplines from an accredited University., • Over 2 years of experience in the HVAC, refrigeration, or chiller systems controls industry., • Experience with the following:, • Control Systems Engineering/Electrical Engineering., • PLC Programming Logic (Allen-Bradley and/or Siemens)., • Communication Networking., • National Electric Code., • 3-Phase power and electrical circuits. Preferred Education and Experience • Process Engineering experience., • Knowledge of CAD software (AutoCAD preferred)., • Certifications for Rockwell products and other relevant applications., • Membership, accreditation in IEEE, ISA, or other relevant group or awards in relevant industry groups. Additional Eligibility Qualifications None required for this position. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job DescriptionDescription: The Engineering Manager oversees the engineering team responsible for designing, developing, and supporting industrial refrigeration systems and projects. This role leads technical project execution, ensures compliance with industry standards and regulations, and drives innovation and process improvement. The Engineering Manager collaborates closely with project management, sales, service, and field teams to deliver high-quality solutions to customers. ESSENTIAL DUTIES & RESPONSIBILITIES: (Additional duties may be assigned). • Lead and manage a team of engineers (mechanical, electrical, controls) in the design and development of industrial refrigeration systems., • Oversee preparation of engineering documents, including P&IDs, equipment specifications, layout drawings, and bills of materials., • Ensure projects meet technical specifications, budget, timeline, and safety requirements., • Provide technical guidance and mentorship to engineering staff., • Support project estimation and proposals by reviewing client requirements and contributing to system design concepts and cost estimates., • Coordinate with other departments (Project Management, Procurement, Service) to ensure seamless project execution., • Maintain knowledge of industry standards, codes (e.g., IIAR, ASHRAE, OSHA), and emerging technologies., • Manage workload allocation, team development, and performance evaluations., • Drive process improvements, standardization, and quality control within engineering operations., • Support troubleshooting and resolution of complex technical issues in the field as needed., • Professional Engineer (PE) license or ability to obtain one., • Extensive knowledge of industrial refrigeration systems, especially ammonia and CO2 technologies., • Proficiency in AutoCAD and Revit to be able to manage team., • Strong understanding of industry codes and standards (IIAR, ASHRAE, OSHA, ASME)., • Excellent leadership and team management capabilities., • Proven ability to manage multiple projects and meet tight deadlines., • Effective problem-solving and analytical skills for troubleshooting complex systems., • Strong written and verbal communication skills for technical and non-technical audiences., • Familiarity with project management software (e.g., MS Project)., • Experience collaborating across departments such as sales, project management, and field service., • Supervise and direct the daily activities of the engineering team., • Assign tasks and projects based on team strengths, workloads, and project priorities., • Review and approve engineering work, ensuring quality and compliance with standards., • Mentor and train engineers to develop technical skills and professional growth., • Conduct performance evaluations, provide feedback, and manage performance issues., • Foster a collaborative, respectful, and safe work environment., • Manage staffing levels and participate in hiring, onboarding, and training processes., • Coordinate resources to meet project schedules and deadlines., • Promote adherence to company policies, procedures, and safety regulations., • Serve as the primary point of escalation for technical or project-related issues within the engineering team.Requirements:, • Bachelor’s degree in Mechanical Engineering, Chemical Engineering, or related field (Master’s degree a plus)., • Professional Engineer (PE) license preferred., • 7+ years of engineering experience in industrial refrigeration, HVAC, or related industries., • 3+ years in a leadership or supervisory role., • In-depth knowledge of ammonia and/or CO2 refrigeration systems design and safety standards., • Strong understanding of industrial refrigeration components: compressors, condensers, evaporators, pumps, valves, and control systems., • Proficiency with AutoCAD and Revit., • Excellent organizational, problem-solving, and communication skills., • Ability to manage multiple projects simultaneously in a fast-paced environment., • Willingness to travel occasionally to job sites or client facilities. EQUIPMENT & PHYSICAL REQUIREMENTS • Use standard office equipment (computer, phone, printer, etc.) for daily tasks and communication., • Operate and review engineering software (e.g., AutoCAD, Revit, SolidWorks) for design and documentation., • Occasionally perform site visits, requiring the ability to navigate industrial environments safely., • Wear appropriate personal protective equipment (PPE) when visiting job sites, such as hard hats, safety glasses, steel-toe boots, and hearing protection., • Physically inspect equipment installations, requiring bending, climbing ladders, walking through mechanical rooms, and accessing tight spaces., • Safely handle and review specifications for refrigeration system components, including compressors, valves, piping, and control devices., • Maintain awareness of safety procedures around ammonia, CO2, and other industrial refrigerants., • Occasionally lift materials or equipment weighing up to [e.g., 25-50 pounds] during site inspections or reviews., • Proficiency with engineering design software (e.g., AutoCAD, Revit, SolidWorks) for creating and reviewing technical drawings., • Competence in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) for documentation, reporting, and communication., • Ability to use project management software (e.g., MS Project) to track schedules and resources., • Experience with document management systems for organizing engineering files and records., • Comfortable working with ERP or business management systems for project tracking and budgeting., • Skilled in using PDF markup tools (e.g., Bluebeam) for reviewing plans and specifications., • Basic understanding of controls or PLC software tools (a plus but not always required)., • Ability to quickly learn new software or digital tools relevant to engineering and project management., • Strong keyboarding and data-entry skills for efficiency and accuracy.

Job Description ELECTRICAL CONTROLS PROCESS ENGINEER - Mount Airy, NC, or Jacksonville, FL We are seeking a dynamic and motivated Electrical/Controls Process Engineer to join our home office engineering group and manage and lead the electrical/controls processes for the company’s manufacturing facilities. This includes various processes from power distribution to electronic controls on machinery and components. If you are an experienced and technically skilled Electrical/Controls Process Engineer that has proven your ability to perform well in a heavy, discrete manufacturing environment, Insteel has an opportunity for you. This position is not eligible for visa sponsorship and requires being located in the US and eligibility to work in the US. Position Snapshot You will be responsible for designing, developing, installing, and maintaining equipment which is used to power, monitor, and control industrial systems, machinery, and processes. You will further be responsible for all equipment specification, layout design, quality, efficiency, and providing instruction and technical support to the manufacturing plants. The position will report to the Director of Manufacturing located in Mt. Airy, NC, but will be based out of either Mount Airy, North Carolina or Jacksonville, Florida. Relocation assistance may be available to the “stellar” candidate that meets all criteria. The position requires travel to all Insteel Wire Products facilities located in Arizona, Texas, Tennessee, Missouri, Kentucky, Florida, North Carolina, and Pennsylvania. The position requires extensive travel (up to 75%). To perform well in this role, you will need to: • Provide technical support to facility Maintenance Departments on all electrical/electronic matters, • Direct, test and diagnose malfunctioning apparatus such as Programmable Logic Control Programs, drives, and motors, • Write and/or modify PLC programs, • Create and maintain electrical drawings and schematics, • Perform regular arc flash studies of each facility and assure that each facility has the proper documentation and labeling to maintain compliance arc flash safety requirement and with federal, state, and local regulations, • Perform regular analysis of electrical components to improve system reliability and reduce risks associated with improperly connected or overloaded circuits and devices, • Provide support for special controls, measuring devices, test equipment, and special projects including, but not limited to, component selection, controls recommendations, vendor recommendations, and installation, • Oversee project workflow and supports internal and external resources to ensure timely delivery of projects while meeting performance and budget targets, • Consult with equipment suppliers to determine appropriate equipment specifications and maintenance protocols, • Conduct research and development investigations to develop and test new equipment, processes, and procedures, • This role requires extensive professional, technical, or administrative training., • Bachelor’s degree or higher in Electrical or Electronic Engineering from an ABET accredited institution, • Broad knowledge of a technical field applicable to Electronics Technology, Electrical/Electronic Engineering or Industrial Electronics including a working knowledge of Computer Aided Design (CAD), AC and DC drives, and PLC Control Logic, • Computer skills including Microsoft Windows, Microsoft Office, and AutoCAD., • Minimum of 3 years’ work-related experience in an industrial manufacturing environment. A strong background in troubleshooting foreign (Italian/German) production machinery and schematics is preferred., • Organizational experience with CMMS (Computerized Maintenance Management Software) preferred., • Should have significant experience in the following: manufacturing Electrical Engineering or Process Controls role, knowledge of Lean Manufacturing Practices, and the ability to lead and oversee the electrical and process controls functions of a multi-facility environment., • Competitive base pay with bonus eligibility based on company performance, • Opportunity for professional growth, • Paid time off including holidays and vacation, • Excellent benefits to include medical, dental, vision, company paid life/short-term disability/long-term disability insurance, flexible spending accounts (FSA), health savings account (HSA), 401(k) with match, company paid tele-health, stock purchase plan, tuition reimbursement assistance, and Employee Assistance Plan (EAP). For your hard work, you receive: • Competitive base pay with bonus eligibility based on company performance, • Opportunity for professional growth, • Paid time off including holidays and vacation INSTEEL is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law. If you are qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request accommodation, contact a Human Resources Representative. Applicants must be authorized to work for ANY employer in the U.S. We are unable to consider applicants residing in locations outside the US requiring Visa sponsorship at this time. About the Company: Insteel Industries is the nation’s largest manufacturer of steel wire reinforcing products for concrete construction, including prestressed concrete strand and welded wire reinforcement such as engineered structural mesh and concrete pipe reinforcement. Founded in 1953 and headquartered in Mount Airy, NC, Insteel operates 11 manufacturing plants across the U.S. and has a dedicated engineering services division. As a publicly traded company, our goal is to be the supplier of choice by delivering superior value to our customers. Learn more at insteel.com/careers. Fraud Prevention Notice: Please note that Insteel Industries will never ask applicants to purchase equipment, send money, or provide payment information at any point in the hiring process. We may request certain personal information only after an official offer has been extended and the background check and drug screen have been successfully completed. If you receive a request for sensitive information or payment before these steps, it is not from our company. To protect yourself, please report any suspicious activity to our HR team by calling us at (336) 786-2141. Powered by JazzHR DMJNKXBw3w

Job Description Department: Process Job Title: Process Engineer Supervisor (Bilingual Preferred) JOB PURPOSE The Process Engineer Supervisor will lead a team of process engineers responsible for designing, optimizing, and maintaining manufacturing processes to ensure the efficient production of high-quality solar panels. You will play a crucial role in driving continuous improvement, implementing best practices, and ensuring compliance with safety, quality, and sustainability standards. Your leadership and technical expertise will be instrumental in supporting the company's growth and innovation within the solar energy industry. JOB DUTIES & RESPONSIBILITIES • Lead, mentor, and develop a team of process engineers. Provide guidance, set clear performance expectations, and foster a culture of collaboration and innovation., • Oversee the design, development, and optimization of solar panel manufacturing processes. Collaborate with cross-functional teams to ensure efficient and reliable production methods that meet quality and cost targets., • Drive continuous improvement initiatives within the manufacturing process. Identify areas for enhancement, implement innovative solutions, and monitor the impact on production efficiency, product quality, and resource utilization., • Ensure that manufacturing processes adhere to the highest quality standards. Develop and implement quality control measures, monitor process performance, and work with quality assurance teams to address any deviations., • Prioritize the safety of all team members and ensure that manufacturing processes comply with safety regulations. Promote sustainable practices and work to minimize the environmental impact of manufacturing operations., • Lead root cause analysis for process-related issues, develop corrective and preventive actions, and implement solutions to prevent reoccurrence., • Create and maintain comprehensive documentation of manufacturing processes, including standard operating procedures, work instructions, and process flow diagrams., • Work closely with research and development, production, quality assurance, and other departments to support the introduction of new products, resolve technical challenges, and ensure successful scale-up of manufacturing processes., • Stay up-to-date with the latest advancements in solar panel manufacturing technologies, industry trends, and emerging best practices. Apply this knowledge to drive innovation and maintain a competitive edge., • Coordinate process improvement projects, establish project goals, allocate resources, monitor progress, and ensure projects are delivered on time and within budget. REQUIREMENTS & QUALIFICATIONS • Bilingual (Mandarin, English) preferred., • Bachelor's degree in engineering or a related field; master’s degree is a plus., • 3–5 years of process engineering experience in solar panel manufacturing or a related industry, plus 5–10 years of supervisory experience, • Previous experience in a supervisory or leadership role., • In-depth knowledge of manufacturing processes, especially related to solar panel assembly and testing., • Strong problem-solving and analytical skills., • Familiarity with quality management systems and continuous improvement methodologies (e.g., Six Sigma, Lean)., • Excellent communication and interpersonal skills., • Understanding of safety regulations and sustainability practices in manufacturing., • Proficiency in project management. PLACE OF JOB IN THE ORGANIZATIONAL STRUCTURE Operations Manager / Director

Job Description Do you enjoy collaborating with diverse project teams in a fast-paced environment? Are you interested in joining an organization focused on making a positive impact? If so, we would like to discuss opportunities for growth with you. EnSafe is accepting applications for an Environmental Remediation Project Engineer to join our team in one of our offices located in Tampa, Jacksonville, or Pensacola, FL. The candidate must be willing to work at one of EnSafe Florida’s Offices. Relocation assistance is available to meet this expectation, along with a signing bonus. We are seeking an Environmental Remediation Project Engineer who is ready to support and manage a variety of projects using innovative remedial technologies to address various contaminants in soil, groundwater, industrial wastewater, stormwater, and air. The right candidate will enrich our team of engineers and scientists in providing solutions to address contaminants such as PFAS, 1,4-dioxane, chlorinated solvents, and heavy metals for sites regulated under state, CERCLA, and RCRA laws. Joining our team means immersing yourself in an atmosphere that nurtures creativity, encourages collaboration across all levels, embraces a supportive culture, and facilitates professional development. In this position, you will: • Lead and support remedial and process engineering projects and teams to fill data gaps, design, construct, operate, and optimize systems., • Plan and perform assessments, pilot tests, construction oversight, and remedy O&M., • Evaluate data from aquifer tests, pilot studies, bench testing, sampling events, and modeling to develop remedial strategies., • Prepare, review, and mentor others in the development of design basis, technology feasibility analyses and selection, and design plans, specifications, and reports., • Communicate with regulatory personnel and permitting agencies to ensure compliance with project requirements and applicable regulations., • Provide project and client management from small dry cleaners/gas stations to complex industrial facilities to major federal facilities., • Prepare proposals, cost estimates, and long-term projections for remediation projects., • Bachelor’s degree from an ABET-accredited college in Civil, Chemical, Mechanical, or Environmental Engineering., • 7-15 years of relevant experience required., • P.E. required., • Strong knowledge of FDEP, CERCLA, RCRA, and other environmental regulations, legislation, and SOPs., • Hands-on experience with remediation technologies and O&M for soil, groundwater, stormwater, industrial wastewater, and air for a wide range of contaminants., • Experience with remedial system instrumentation and controls, as well as remote telemetry, is a plus., • Strong consulting, problem-solving, and leadership skills., • A valid driver’s license. EnSafe began as a two-person firm in 1980, navigating complex regulatory compliance issues on behalf of our clients. We nurture our people with opportunities for growth and development. We build enduring, trustworthy relationships with each of our clients, focusing on high ethical and safety standards. We establish this reputation by attracting and retaining high-quality individuals for the long term. At EnSafe, we are committed to cultivating a diverse and authentic workplace. If you’re enthusiastic about this role but your experience doesn’t precisely align with every qualification in the job description, we encourage you to apply nonetheless. You may be just the right candidate for this or other roles at our company. EnSafe is committed to being an EEO employer and all qualified candidates will receive consideration without regard to race, color, religion, national origin, citizenship, age (except for bona fide occupational qualifications), sex, disability, sexual orientation, gender identity, marital status, military or veteran status, any other status protected by federal, state, or local law, or association with a person on the basis on one or more of the foregoing. Check us out on the web at

Job Description Project Engineer Location: Atlanta, Georgia Employment Type: Full Time, Salaried Exempt Experience Level: Entry to Mid-Level, zero to three years Relocation to Atlanta required before starting A growing Atlanta based construction firm is seeking a motivated Project Engineer who wants to build a long-term career in commercial construction. This role is ideal for someone who wants hands on learning, exposure to both field and office operations, and a clear path toward becoming an Assistant Project Manager and eventually a Project Manager. Project Engineer is the operational support hub for the project team. You will manage documentation, coordinate with the design team, support procurement, assist with financial tasks, and maintain regular job site engagement. This is a learning centered role with direct mentorship from experienced Project Managers and Superintendents. Key Responsibilities Document Control and Information Management • Manage submittals, review shop drawings for compliance, and coordinate approvals with the design team, • Draft and process RFIs and track responses to support field operations, • Prepare agendas and detailed meeting minutes for OAC and internal meetings Project Management and Procurement Support • Assist with subcontractor buyout, scope review, material procurement, • Track lead times and delivery schedules to maintain project flow, • Support monthly pay applications, invoice coding, change order pricing, and other financial tasks, • Lead the project closeout process by collecting warranties, manuals, and as built documents Field Support and Quality Control • Walk the job site regularly with the Superintendent to understand sequencing and verify progress, • Document safety observations and support quality control checks, • Manage the punch list process and coordinate subcontractors to complete final items, • Maintain organized photo documentation using Procore or similar software Qualifications • Bachelor’s degree in Construction Management, Civil Engineering, Architecture, or related field, • Zero to three years of commercial construction experience such as internships, co-ops, or entry level roles, • Proficiency with Microsoft Excel, Microsoft Project, and Bluebeam Revu, • Familiarity with Procore or similar construction management software is a plus, • Strong written communication skills and attention to detail, • Eagerness to learn, willingness to ask questions, and a proactive mindset Work Environment and Physical Requirements • Hybrid work setting that includes office work and active job site presence, • Ability to walk job sites, climb temporary stairs, and wear PPE, • Ability to occasionally lift up to twenty pounds Compensation and Benefits Competitive salary, performance bonuses, medical, dental, vision, 401K, and a clear professional growth pathway. You will receive hands on mentorship and opportunities to advance quickly within the organization.

Job DescriptionRole Description Saunders Staffing Agency is seeking a highly skilled and dedicated Professional Engineer for a full-time, on-site role in Jacksonville, FL. The successful candidate will be responsible for overseeing and managing complex engineering projects from inception to completion. This role requires a blend of technical expertise, site management, and stakeholder coordination to ensure project success and regulatory adherence. Key Responsibilities • Project Management: Oversee and manage engineering projects, ensuring they remain on schedule and within budget., • Site Inspections: Conduct regular site inspections to monitor progress and verify that work aligns with approved designs., • Design & Planning: Prepare detailed engineering designs and plans in accordance with client needs and industry standards., • Compliance: Ensure all project activities comply with local, state, and federal safety and regulatory standards., • Stakeholder Coordination: Act as a primary point of contact for project stakeholders, including clients, contractors, and internal teams., • Technical Problem-Solving: Identify technical issues and implement effective solutions to maintain project momentum., • Process Improvement: Provide expert recommendations to improve project efficiency and overall effectiveness.Qualifications, • Education: Bachelor's degree in Civil Engineering or a closely related field., • Licensure: Valid Professional Engineer (PE) license is required., • Technical Skills: Proven proficiency in Civil Engineering and Construction Management., • Design Expertise: Strong skills in preparing detailed designs and plans., • Regulatory Knowledge: Deep understanding of safety and regulatory standards within the engineering and construction sectors., • Communication: Excellent coordination and interpersonal communication skills for working with diverse stakeholders., • Organization: Ability to manage multiple high-priority projects simultaneously and meet strict deadlines., • Experience: Previous experience in the construction or engineering industry is highly preferred.

Job Description Are you interested in working with KMS Solutions, but don't see a current position that fits? Please submit your resume and application here! KMS Solutions is currently collecting resumes for current and future openings. Should your experience align with KMS’s needs, someone from our hiring team will reach out. We look forward to learning more about your background, experience, and career aspirations. Thank you for your interest in a career opportunity with KMS Solutions! Our Philosophy - Building Trusted Relationships KMS Solutions, LLC is a technical management / solutions company that specializes in engineering, analysis, and cyber security. Founded in 2005, KMS is a certified small business with nearly two decades of experience supporting the Department of Defense as well as many other departments and programs critical to our Nations security and well-being. KMS is a two-time winner of the USA Today Top Workplaces recognizing quality workplace cultures across the United States who put their employees first. Additionally, we received the Providence Journal Rhode Island Top Workplaces award and Culture Excellence Awards for Compensation & Benefits, Innovation, Leadership, Purpose & Values and Work-Life Flexibility. Our clients include the US Intelligence Community, Department of Defense, the Joint Staff, Navy, Army, and the Department of State. We have worked closely with DIA, CENTCOM, US Army National Ground Intelligence Center and the National Media Exploitation Center. Our strength is in collectively providing integrated services. We are dedicated to moving our Nation’s agenda forward. It’s the key ingredient that makes us who we are – like our passion for excellence, our innovation throughout our organization and our long-standing customer relationships. You will see this simple philosophy at work in everything we do. It defines who we are, challenges us, forces our minds to be open, and to be a world-class company. Core Values Our Core Values are the guiding principles and our fundamental beliefs that dictate our behavior consistently, not time to time, situation to situation, or person to person, but rather they are the underpinning of our company culture. These values are represented in everything we do: Respect, Authentic Communications, Integrity, Lasting Relationships, and Sustained Excellence (R.A.I.L.S.) Respect - Our interaction with colleagues, peers, customers and others is marked by respect and honor. Authentic Communication - We share ideas, thoughts and concerns with our clients and partners in the most authentic manner. Integrity - We do what we say, say what we do, always practice high ethical standards and honor commitments. Lasting Relationships - We are focused on forging strong, long-term relationships with clients and associates. Sustained Excellence - We consistently deliver genuine value to those whom we serve, provide superior customer value, and work to continuously improve our performance. While delivering genuine value to our customers, we are committed in developing our people, building our brand, and supporting the communities we live and work in. R.A.I.L.S. is an unwavering guide and our core values give us a framework for leadership and daily decisions and help us enjoy our time at work. What we hire (list of recent hires): • Veteran & Transitioning Navy - Military, • Program Manager - Project Manager, • Cybersecurity Engineer, • Cyber Security Specialist, • NQV – Navy Qualified Validator, • Mechanical Engineer, • Electrical Engineer, • Electronics Engineer, • Systems Engineer, • Software Engineer, • Product Integration Engineer, • Reliability Engineer, • System Safety Engineer, • Computer Engineer, • Action Officer, • Auditor, • Technical SME - Subject Matter Expert, • Program Analyst, • Acquisition Analyst - Acquisitions Analyst, • BFM – Business Financial Management, • Navy Financial Analyst, • Logistician & Logistics Analyst, • Management Analyst, • Naval Analyst, • Business Process Analyst, • Configuration Management Specialist, • Integrated Project Team Development (IPTD) Facilitator, • Coach / Trainer, • Technical Writer, • Engineering Technician, • Electronics Technician, • Program Administrator, • Database and SharePoint Analyst, • Tradesmen - Skilled Trades, • Crane Operator / Rigger, • Fabricator, • Contract Specialist - Contractor, • Technical Consulting - Consultant, • Executive Assistant Benefits and Additional Compensation: KMS offers a competitive benefits packaging including medical, dental and vision insurances, flexible spending account, PTO, paid holidays, military leave, bereavement leave, 401k / retirement savings plan, professional development and tuition reimbursement, basic and voluntary life insurance / AD&D, short-term and long-term disability, voluntary AFLAC supplemental insurance products and employee assistance plan (EAP) program. Additionally, KMS offers employee referral bonuses and a discretionary annual bonus. AAP/EEO Statement: KMS Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. KMS Solutions is a drug free workplace.