Offres safe à San Diego, CA - Page 15Create job alerts

Job DescriptionDescription: EVERY EMPLOYEE IS EXPECTED TO UPHOLD OUR CORE VALUES Here to Help Attitude | Deliver Quality | Protect Health | Value Education | Embrace Transparency IMPORTANT ROLES WITHIN THE COMPANY The WDO Repair Technician is accountable for: • Fulfilling contracted WDO repair services, • Completing work on time and within budget, • Follow directions of Supervisor or crew lead., • Read, interpret, and understand WDO crew sheet and reports., • Follow procedures for purchasing supplies and turning in receipts., • Complete work orders according to Thrasher standards using power tools and hand tools., • Maintain a clean and safe work site., • Document work with before and after photos and completed crew sheet as instructed., • Communicate with the customer to provide a positive experience with our company. Follow customer instructions to secure the premises., • When requested by supervisor, lead a simple walk-through of the project with the customer before and/or after work is complete., • Follow company process to communicate any issues with the job, materials, customer, further damage, timeline, safety, or other issues., • Assist other departments as needed., • Communicate with teammates and supervision/management to promote organization., • Escalate issues as necessary to supervisor., • Work overtime and weekends as needed. Cover for other teammates as needed., • Use the LMS (Learning Management System) and complete assigned classes The physical demands/conditions described below are representative of those that must be met/tolerated by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. • Working outdoors, • Climbing ladders, stairs, decks, etc., • Handling and applying pesticides, • Ability to lift and carry up to 50 lbs., • Crawling, • Bending, • Twisting, • Kneeling, • Squatting, • Walking & standing for extended periods of time, • Working with power & manual tools overhead, • Able to drive 15-45 minutes at a time, • Ability to use smart phone/tablet, • Working in various types of weather (Hot and Cold), • Working in confined spaces, • Must use and maintain the safety equipment including bump cap, gloves, goggles, respirators, eye washers and first aid kits, • Ability to wear a respirator for long periods of time, • Comply with all company policies, safety program guidelines, OSHA laws and regulations., • Insurable by motor vehicle insurer (clean driving record)., • Incumbents must demonstrate the ability to follow policies and procedures as established in the Company’s Employee Handbook. Incumbents will also contribute to a positive work environment by behaving and communicating in a manner such that they have a good relationship with all constituent groups, co-workers, and management., • Preferred: two (2) years of carpentry and general home repair experience, • Excellent written and oral communication skills, • Strong organizational, time-management, and problem-solving skills, • Team player, • Able to take the initiative, • Comfortable with speaking to customers, • Strong attention to detail, • Able to adjust to a schedule that is based on company needs, • Dependable and punctual, • Preferred: Bilingual English and Spanish at a conversational level

Job Description🌟 Be a Part of Something Bigger! 🌟 At Luminator Technology Group, we believe we are Better Together. We always put the Customer First, focus on achieving Results, strive to Be the Best, and foster a culture of Respect & Trust. We are on a mission to innovate and revolutionize global transportation technology. Luminator is a global leader spanning over 85 countries and nearly 1,000 employees worldwide. We’re searching for a Senior Field Service Technician to join our growing Field Operations team and play a key role in driving our vision forward. What You’ll Do: As a Senior Field Service Technician, you will be at the heart of our customer success and operational excellence, providing hands-on expertise to maintain, troubleshoot, and repair cutting-edge public transit Mobile Video System equipment. You’ll: • Conduct on-site customer service visits, preventative maintenance, and day-to-day repairs on transit system buses., • Identify and resolve equipment malfunctions while collaborating with manufacturers and field personnel., • Manage multiple assignments and respond to technical challenges with a calm, problem-solving approach., • Travel occasionally within the U.S. for retrofits, startups, and troubleshooting projects.What You’ll Bring to the Team:Qualifications:, • High school diploma or equivalent required; AS degree or equivalent military technical training preferred., • 2–4 years of technical experience; experience in a manufacturing or transit environment preferred., • Proficiency with MS Office, including Outlook, Teams, Word, and Excel., • Ability to read schematics and wiring diagrams (preferred).Skills:, • Technical Savvy: Proficiency with electrical systems, automotive wiring, voltmeters, and small tools., • Customer Focus: Strong interpersonal skills to handle demanding situations and deliver exceptional service., • Problem-Solving Skills: Ability to diagnose, resolve, and communicate complex technical issues effectively.Why You’ll Love Working at Luminator:, • Competitive compensation with career growth potential., • Generous time off: Vacation and sick time, 10 company holidays, and 2 floating holidays., • Educational Assistance Program: Robust reimbursement program for professional growth., • Health and wellness: Medical, dental, and vision coverage plus 401k matching. Luminator Technology Group intends to provide a safe and drug-free work environment for our customers and our employees. As a condition of employment Luminator Technology Group will require a negative drug screen during the pre-employment process due to working on or with federal contracts. It is the policy of Luminator to ensure equal employment opportunity without discrimination or harassment on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, marital status, citizenship, national origin, genetic information, or any other characteristic protected by law. Luminator prohibits any such discrimination or harassment. The above described responsibilities and requirements are a general guide for the role you are applying for and are not all inclusive of the job requirements. Luminator Technology Group does not accept staffing agency candidates for our postings. All positions posted are required to be in office unless otherwise posted. It is the policy of Luminator to ensure equal employment opportunity without discrimination or harassment on the basis of race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, marital status, citizenship, national origin, genetic information, or any other characteristic protected by law. Luminator prohibits any such discrimination or harassment. The above described responsibilities and requirements are a general guide for the role you are applying for and are not all inclusive of the job requirements. Luminator Technology Group does not accept staffing agency candidates for our postings. All positions posted are required to be in office unless otherwise posted. Powered by JazzHR DfVj2Mizmm

Job DescriptionDescription: Field Maintenance Technician is a role whose preliminary focus will be to learn the CGP story, learn our core values, and live it in your day-to-day. CGP’s Field Technician will deliver a high level of customer service to property management, hospitality, retail and restaurant clients at the highest professional level. Using a variety of skills and tools, completes all tasks safely, efficiently, with high quality, and within efficient timeframes to ensure reliability. Requirements: In this role, you will: Performing Maintenance Activities for Clients: • Must call client location in advance for all work orders., • Must have necessary tools when entering the job site, according to the trade and nature of the job., • Must have the necessary paperwork and specific instructions related to the client and work order (sign off sheet; check in and out instructions, etc.), • Introduce yourself with the store manager or MOD and explain the reason for the visit., • Smile, shake hands, and explain what they can expect (length of time, possible disruptions to their business, etc.), • If we leave a jobsite to buy materials, we must always leave the job area safe and secure and notify the SM or MOD., • Tech must call the office to request a PO number each time material is purchased for a job. When purchases are made after hours the work order number should be used instead., • If a job is expected to exceed the NTE approved by the office, you must call for approval to proceed before exceeding this amount., • Tech must always clean up before leaving the jobsite., • Tech must speak with the store manager of MOD before leaving the premises to explain what has been done, or what is left to do, and ask if they have any questions before you leave., • Tech must get before and after photos of all work performed or inspected., • Tech must get the SM or MOD’s signature on the related paperwork., • Tech must call the office to inform them when each job has been completed., • Establish effective working relationships with employees., • Work with Project Manager when necessary for clarification on jobs., • Maintain exceptional customer service skills., • Complete job tickets and mileage logs accurately and thoroughly on a daily basis., • Record the use of truck stock that is used on respective job tickets., • CGP employees will follow guidelines that will protect the interest and safety of all employees and the organization as well as ensure job site etiquette., • Company provided uniforms will be worn at all times., • Proper work boots are to be worn at all times., • Employees must present themselves in a professional manner:, • No foul language., • Use of cell phones only when necessary and not in the presence of clients, in stores or while driving., • Being prepared when arriving on site to begin work., • Always inform clients when the task has been completed or when leaving the job site., • Company vehicles must be parked in the proper location on the job site. Never park in front of clients’ main entry., • Work area must be clean upon departure; good housekeeping is part of the job., • Do not block aisles, traffic lanes, fire exits, stairs, etc., • Do not use tools with split, broken, or loose handles. Keep cutting tools sharp and carry all tools in the proper fashion., • Never do anything that is unsafe in order to get the job done., • Use your personal protective equipment whenever it is required., • Know the correct use of hand power tools. Use the right tool for the job., • Must be a quick learner., • Must have the ability to use basic hand tools and other equipment., • Must be able to follow verbal or written directions., • Must be a safe driver., • Must be able to pick up and deliver supplies/materials., • Must be neat, clean and organized in the shop, company vehicle and job sites., • Perform preventative maintenance work as required., • Communication skills with dispatch/office., • Understand and use the different check in/check out requirements for each individual client., • Ability to carry and use tools and equipment, • Requisite ability required to drive motor vehicle, • Ability to frequently bend, stoop, and crawl, • The physical limitation of ladders, • Ascend and descend a ladder while wearing a tool belt that weighs 10 lbs., • Get in and out of a van to retrieve various items., • Lift miscellaneous tools and products within the warehouse and van racks., • Occasionally sits and climbs ladders/stairs; performs fine motor and pinching movements; pivots with feet, and bends, twists, and laterally flexes back; reaches at overhead, shoulder, knee, and floor levels; shoulder circumduction while driving (turning steering wheel); stoops, squats, crouches, kneels, crawls, and presses foot pedals; extends, flexes, rotates, and laterally flexes neck Minimum • 1 to 3 years maintenance trade experience with a like industry such a property management, hospitality, retail or restaurant facility services., • High school degree or GED equivalent preferred, • Valid state driver’s license and a good driving record, • Successfully meet (and maintain) background check requirements Division: Maintenance and Construction Reports to: Project Manager and/or Project Administrator Position Classification: Full Time FLSA Status: Non-Exempt Average Working Hours: Up to 40 hours per week plus On-Call Service (rotating), some nights & weekends as needed. EEO Statement The equal employment opportunity policy of this employer provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, age, marital status, familial status, disability, or genetic information, in compliance with applicable federal, state and local law. This employer hires and promotes individuals solely on the basis of their qualifications for the job to be filled.

Job DescriptionJoin the Movement! San Diego Gymnastics is looking for an energetic and fun professional that is career minded to join our team! If you are enthusiastic about being a part of the movement to improve the health and lives of kids, this is the job for you! We are looking for a committed Director to teach our very popular parkour program: classes, camps, events from ages 18 months and up. Our programs teach kids how to safely move through obstacles, progress through gymnastics or parkour skills, gain balance, flexibility, agility and strength. We provide a clean, safe and fun environment for our kids to not only develop their athletic skills, but to create friendships and life skills that will last a lifetime. We also strive to provide one of the best, upbeat, fun, inclusive and rewarding work environments possible. Experience with gymnastics and/or parkour is required. In addition to this location, we have 5 other San Diego locations: La Costa (Carlsbad), Grossmont Center (La Mesa) and Otay Ranch (Chula Vista), Point Loma, Mission Valley (San Diego) $18-$30 an hour based on experience. Potential for signing bonus! Please reply here or visit our to apply! Job Types: Part -time

Job DescriptionTitle: Fuel Storage Tank TechnicianLocation: CA, AZ, NM, FL, CO, GA, TX and more (must be able to travel up to 1000 miles a week as needed)Compensation: $25-45hr (DOE)Requirements: • Ability to drive up to 1000 miles a week and conduct daily DVIR inspections, • Ability to adjust to field conditions and requirements, • Perform required monitoring certification, secondary containment, spill bucket testing, and vapor recovery resting and repairs per state requirements, • Submittal of daily work order and project associates paperwork, • Occasional out of town stay is required Experience with UST/AST monitoring and fuel system maintenance equipment is required. About: Service Technicians maintain and repair all refueling equipment for the petroleum industry, as well as commercial and municipal refueling facilities, marinas, and airports. The Technician will ensure that state and local regulatory directives regarding storage and monitoring systems are met. He or she will work closely with client personnel as a company representative, perform maintenance, and troubleshooting without direct supervision. The Service Technician will serve as the eyes and ears of our clients identifying and documenting all compliant and any observed non-compliant issues. This position will provide services in an efficient and timely manner and conduct business in a safe, ethical, and professional manner. Additionally, this position will act as Job Site Safety Officer and implement internal company safety policies at the job site. Must be able to follow instructions and complete assigned jobs timely and safely.Duties/Responsibilities * Experience with UST/AST monitoring and fuel system maintenance equipment is required. * Current or prior ICC UST Service Technician certification. * 24 or 40-hour HAZWOPER certificate or current 8-hour refresher courses. * Troubleshoot & work through problems independently. * Understand and conform to complex regulatory requirements. * Read and interpret machine diagnostic reports.

Job Description United Service Technologies, a Tech24 company, are a full-service commercial kitchen equipment repair company. We provide complete foodservice equipment maintenance and repair services for restaurants, QSRs, convenience stores, retailers, coffee shops, and concessions operations, specializing in commercial cooking, refrigeration, and HVAC equipment. We are a nationwide company, headquartered in Greenville, SC with local branches located coast to coast. The Commercial Foodservice Technician is responsible for driving a company vehicle to and from customer sites to troubleshoot, maintain and repair commercial kitchen equipment. To be a successful Commercial Foodservice Technician, you should be able to work independently and solve problems as quickly and efficiently as possible. To excel in this position, you should have strong technical skills, be a master at trouble shooting and be an expert in customer service. Responsibilities: • Troubleshoots and repairs commercial kitchen equipment., • Inspects the commercial kitchen equipment and their related components to ensure safe operation., • Communicates with customer and branch staff regarding status of repairs to ensure schedule is maintained and delays are properly communicated with customers., • Completes service tickets according to procedures., • Tracks truck stock to ensure needed parts are stocked on vehicle., • Sustains service vehicle, tools, and uniforms to Tech24 standards., • Sets a positive example for less experienced and/or new technicians by being a Company advocate., • Follows all company policies and procedures, particularly regarding safety. Qualifications: • Valid driver's license and acceptable driving record, • 3-5 years of related experience, • Superb customer service skills, • Dependable and able to work independently, • Standard computer skills, • Own industry’s standard hand tools, • Ability to travel extensively within the region, • Ability to work some nights, weekend, and holidays for on-call rotation with your department (frequency varies with department size), • Mechanically inclined with a hunger to learn new techniques and approaches, • Previous experience as a commercial technician Benefits Include: • On demand training and full trouble shooting support., • Company sponsored and manufacturer’s training, • Company uniforms, phone, vehicle, and gas card, • Medical, vision, and dental insurance and short-term disability plans, • Company paid long term disability and life insurance, • Paid time off and paid holidays, • 401(k) retirement savings plan with Company match and immediate vesting Tech24 is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other federally protected class. For more information about Tech24 and our career opportunities visit

Job DescriptionCompany Description Monro’s family of brands is one of the leading automotive service and tire dealers in the United States. We work on approximately five million vehicles a year, but with us, it is personal. Every guest is important, and every teammate is valued. That is our people-first approach. Headquartered in our hometown of Rochester, New York, where our founder, Chuck August, opened his first store in 1957, we have grown to nearly 1,300 auto repair shops and tire dealers in 32 states from coast to coast. Monro powers 16 highly respected tire and auto service brands, supporting each company’s regional strength and community connections. From big cities to small towns to rural crossroads, you will find us in neighborhoods of every shape, size, and color. Under the Monro banner, we are united TEAM, and share the same mission to bring our guests the highest quality tire and auto service in the industry. Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships, if you value honesty and integrity - we have a Destination for you at Monro. Destination Monro -Your Career is Here! About The Role: Compensation is $17-19 Per hour based on experience. This role includes additional incentives The General Service Technician is a blended role with both front and back shop responsibilities, including at least two days per week dedicated to front counter duties. This position is responsible for performing routine vehicle repairs and maintenance in accordance with company standards and manufacturer specifications while effectively communicating vehicle issues and solutions to guests. Additionally, as a key holder and manager on duty (MOD) when needed, the General Service Technician plays a vital role in providing a superior guest experience, driving sales of automotive services and tires, and ensuring a welcoming in-store atmosphere. Job Description Responsibilities: • Accurately perform basic vehicle services and repairs effectively and efficiently in accordance with Monro standards of operation., • Tire Services – perform wheel removal, balancing, patch/plug repairs, changing, mounting, installation and TPMS service and repair., • Vehicle Services – perform lubrications, oil changes, basic maintenance (e.g.: bulb, wiper blade and filter replacements, etc.), battery testing and installations., • Consistently complete Monro’s Courtesy Inspection process, on every guest vehicle, identifying, documenting, and communicating additional needed services and repairs., • Assist in inventory management to include pulling tires and parts, unloading and stocking inventory., • Assist with all general store duties, ensuring the store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Consistently perform service(s) in accordance with Monro’s safety standards including but not limited to Monro’s Wheel Torque, Oil safety and compliance procedures., • Test drive vehicles in accordance with Monro’s Road Test policy, including consistently dedicated test drive routes, while observing utilizing our all local traffic and safety laws., • Understand and adhere to company policies and procedures, Governmental standards including environmental codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules. Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc., • Under the direction of management, assists in various aspects of guest care, work order completion and register assistance, facility maintenance, and outside purchase ordering., • This position is a secondary key carrier responsible for basic and detailed opening and closing responsibilities., • Able to understand and effectively communicate all products and services Monro offers to guests., • Perform other duties as assigned and required. Qualifications, • High School Diploma or equivalent is preferred., • Automotive training including basic car maintenance and repair or the equivalent combination of education and experience., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer’s vehicles to conduct test drives. This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. General Service Technicians must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to see, and lift, carry and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping,kneeling, twisting. Additional Information Benefits * Performance based incentives * Paid vacation and holidays for Full-Time Teammates * Reimbursement for ASE Certifications * Reimbursement for State Inspection Licenses, where applicable * 401k eligibility immediately upon hire * Direct Deposit * Employee Discounts * Healthcare, Vision, and Dental for Full time teammates * Employee Access Perks * Career Advancement Opportunities Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionDescription: Who We Are: Bob Jenson Air Conditioning & Heating was founded in 1977 with a simple mission: to provide honest, high-quality HVAC service at a fair price. Built on hard work, integrity, and a dedication to customer satisfaction, the company quickly earned a reputation in San Diego for doing what they said they would do. Today, we proudly continue that legacy, serving all of San Diego County with the same values and commitment to comfort that Bob Jenson started with. Duties and Responsibilities: • Inspect, repair, modify and install HVAC equipment including refrigeration and air conditioning compressors, receivers, condensers, chillers, water cooling towers, forced air converter units, pumps, automatic and hand valves, expansion valves and capillary tubes., • Conduct regular preventive maintenance inspections of refrigeration units, isolated heating and ventilating units, including boilers, gas and electrically operated air conditioning equipment, and make necessary adjustments or repairs; service and repair evaporative coolers., • Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls, safety valves, and automatic gas valves., • Operate a variety of hand and power tools, welder torch, vacuum pump, test equipment utilized in the trade and a motor vehicle; maintain equipment in effective and safe working condition; maintain parts and tool inventory., • Repair and rebuild semi-hermetic reciprocating compressors and compressors for centrifugal refrigeration machines., • Perform skilled electrical maintenance work in the repair, installation and alteration of HVAC equipment, components, timers, motors and wiring systems as needed; connect motors to control panels., • Test and examine boiler operations, observing meter and pressure gauges; conduct boiler water quality test and treatment; adjust boiler burner combustion., • Lubricate and pack heating, ventilation, refrigeration, and air-conditioning motors, pumps, fans, and other equipment., • Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of refrigeration and air conditioning systems; flush boilers, descale tubing; rebuild pressure and temperature safety valves and water pumps., • Install, rebuild, replace or repair fans, motors, thermostats, fuses, filters, bearings, valves, controls, gaskets and other equipment as necessary., • Maintain related records concerning time, labor and materials; maintain log of, • tasks performed and write reports as required., • Perform other duties as assigned., • 1 year of experience, • EPA 608, • Completion of training course from a trade school, • Valid California driver’s license with a clean driving record, • Standard practices of the HVAC and refrigeration trade., • Theory of HVAC and refrigeration systems., • Materials, methods and tools used in the operation and repair of HVAC and, • refrigeration systems., • Applicable building codes, ordinances and regulations of State and local, • authorities pertaining to HVAC, refrigeration and boilers., • Air compressors and pneumatic controls., • Cooling tower and boiler water treatment., • Manual and electrical tools and equipment applicable to the HVAC and, • refrigeration trade., • Welding and soldering techniques., • Health and safety regulations., • Basic record-keeping techniques., • Perform skilled mechanical maintenance duties in the inspection, repair,, • installation and alteration of District heating, ventilation, air conditioning and, • refrigeration systems and related equipment and facilities., • Calibrate systems., • Perform preventive maintenance and routine servicing of equipment., • Diagnose defects, and install, repair and maintain heating, ventilating, refrigeration,, • and air-conditioning units., • Follow oral and written instructions., • Operate specialized machinery, equipment and tools utilized in the repair,, • installation and maintenance of heating, ventilation, air conditioning and, • refrigeration systems., • Communicate effectively both orally and in writing., • Understand and follow oral and written directions., • Work cooperatively with others., • Work independently with little direction., • Meet schedules and time lines., • Maintain routine records and prepare reports., • Routinely lift objects weighing up to 75 pounds., • Work is performed while standing, sitting, and/or crouching for full shift., • Requires the ability to communicate effectively using speech, vision and hearing., • Requires the use of hands for simple grasping and fine manipulations., • Requires bending, squatting, crawling, climbing, reaching., • Requires the ability to lift, carry, push or pull medium weights, up to 75 pounds., • Requires the ability to go up and down ladders, stairs, emergency exits etc., multiple times a day., • Requires activities involving being around moving machinery, exposure to marked changes in temperature and humidity, and exposure to dust, fumes and gases.

Job Description Job Title: Valet Attendant Department: Valet Parking Services Location: San Diego, CA Global Parking Systems are experts in the management of parking lots, valet services, parking management and shuttle operations at airports across the country. Global Parking Systems also partner with SP Plus Parking Corporation a leader in the parking management space. Together, we are committed to making the parking experience a first-class enjoyable one for parking consumers. Built on the foundation of excellence and integrity, we are dedicated to providing the highest level of service at all of our parking facilities. MAIN RESPONSIBILITIES Basic Function: The Valet Attendant will drive, park and retrieve customer cars in a safe and courteous manner and assist customers in and out of their vehicle. Valet Attendants play a crucial role in making sure all customers are given a professional, courteous and timely valet service. Essential Functions Responsibilities: -Inspect every vehicle before safely parking it, noting all findings. -Explain valet rates to customers. -Observe traffic laws and safe driving practices. -Report all accidents, safety hazards, unusual occurrences, and policy violations to management. -Know the area's major streets, landmarks, and freeways to ensure customers have a seamless transportation experience. -Come to work in your clean uniform every scheduled shift, on time, and ready to work. -Remain in complete uniform for the entirety of your shift. -Assist management with additional duties as assigned. MINIMUM QUALIFICATIONS Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience Required: The ability to safely drive a vehicle with a manual transmission (stick shift) is a plus. License Requirement: A valid state driver’s license, current address, and acceptable driving record. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to customers and other employees of the company. Reasoning Skills: Ability to apply common sense understanding to carry out detailed but standard written or oral instructions. Ability to exhibit sound and accurate judgment. Ability to effectively respond to customer requests for assistance, problems, or complaints. Customer Service Skills: Ability to effectively respond positively to customer problems or complaints. Mathematical Skills: Ability to add and subtract two-digit numbers and multiply and divide with 10’s and 100’s. Ability to perform these operations using units of American money. Adaptability: The ability to follow written and verbal instructions and calmly adapt to changes, delays, and unexpected events while working. Appearance: Employees will be required to maintain a neat and clean appearance and be in complete uniform at all times. Physical Demands: The physical demands described here are representative of those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions. While performing the duties of this job, the employee is frequently required to sit, stand, walk, use hands and fingers, handle or feel objects, and talk. The employee will also walk and run for extended periods of time to park and retrieve customer vehicles, including using stairs and elevators. The employee is occasionally required to climb or balance; stoop, kneel or crouch. The employee must be able to lift and/or move up to 45 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and the ability to adjust focus. Benefits Include: After 90 days, full-time employees become eligible for dental, medical, and vision insurance, paid holidays, sick time, and vacation. STARTING PAY: $17.00/PER HOUR THIS IS A NON-EXEMPT/HOURLY POSITION. CRIMINAL BACKGROUND CHECK AND PRE-EMPLOYMENT DRUG TESTING IS REQUIRED. Global Parking Systems is an equal opportunity/affirmative action employer. Qualified applicants will be considered without regard to race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionSalary: $22-35 per hour Job Title: Install Technician in San Diego The Install Technicians primary responsibilities will be to complete the install process, which consists of installing cabinetry, troubleshooting at construction sites, moderate handiwork to ensure proper installation.This position is best suited for someone who is flexible, patient, and eager to contribute to the success of Capsule by setting our customer up for success. Job location: San Diego for 1 week every 3 weeks Primary Responsibilities (Installs- Remote): • Install cabinets in San Diego on construction site, • Collaborate with project teams to understand installation requirements and timelines., • Ensure the proper alignment, positioning, and functionality of installed equipment., • Material Handling:, • Safely and efficiently handle construction materials, tools, and supplies., • Transport and position materials at the construction site using appropriate equipment., • Assist in the loading and unloading of construction materials., • Site Preparation:, • Unpacking and staging product, • Participate in site preparation activities, including measuring, grading, and leveling., • Quality Assurance:, • Conduct quality checks on installed components to ensure compliance with project specifications., • Identify and report any issues or discrepancies during the installation process., • Safety Compliance:, • Adhere to all safety protocols and regulations to maintain a safe working environment per OSHA., • Use personal protective equipment (PPE) and follow safety guidelines during installation activities., • Documentation:, • Maintain accurate records of installed components and materials., • Report daily activities and progress to project managers and supervisors., • Minimum 2 years construction, plumbing, electrical, or similar experience preferred, • Valid US Driver's License, • Proficiency in using hand tools, • Experience with hauling trailers and/or moving large equipment a plus, • Ability to lift heavy objects, • Willingness to travel at a moments notice, • Desire to deliver a top tier product to our customers, • Adaptability to last minute changes, or unexpected situations, • Eagerness to improve processes within day-to-day operations in an effort to streamline deployment and install processes, • Steal toe shoes required

Job DescriptionSalary: $70,000-$110,000 Company: Elite Rooter Employment Type: Full-time Job Description: Are you a skilled technician with a knack for diagnosing and solving drainage issues? Elite Rooter, a leader in plumbing and drain services, is seeking an experienced and reliable Drain Service Technician to join our team. If you have a passion for hands-on work and delivering exceptional service, we want to hear from you! Key Responsibilities: • Drain Cleaning: Perform drain cleaning services for residential and commercial clients using various methods and equipment., • Diagnosis and Repair: Accurately diagnose drainage issues and implement effective repair solutions., • Maintenance: Conduct routine maintenance checks on drainage systems to prevent future issues., • Emergency Response: Respond promptly to emergency service calls to resolve drainage problems., • Customer Service: Communicate clearly and professionally with customers to explain issues, solutions, and costs., • Documentation: Maintain accurate records of services performed, parts used, and customer interactions., • Safety Compliance: Follow all safety protocols and procedures to ensure a safe working environment. Qualifications: • Experience: No minimum experience needed., • Skills: Proficient with drain cleaning equipment and tools; strong problem-solving and troubleshooting abilities., • Certification: Relevant certifications (e.g., plumbing license) are a plus., • Customer Focus: Excellent customer service and communication skills., • Dependability: Strong work ethic, punctuality, and reliability., • Physical Requirements: Ability to lift heavy equipment, work in confined spaces, and perform physically demanding tasks., • Transportation: Valid drivers license with a clean driving record. Benefits: • Training and Development: Ongoing training and opportunities for career advancement., • Uniforms and Equipment: Company-provided uniforms and necessary equipment. Elite Rooter is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job DescriptionJoin the VetPowered Team: Seeking Skilled CNC Machinery Repair Field Service Technicians! Are you a fully-trained CNC Machinery Repair Technician with a passion for precision and problem-solving? VetPowered, a leader in advanced manufacturing solutions, wants you on our team! 🔧 What You'll Do: • Perform preventative maintenance on cutting-edge CNC machines., • Respond to service calls with expertise and urgency., • Fully-trained CNC Machinery Repair Technicians., • Certification is a plus but not required—we value experience and skill!, • Competitive pay and benefits., • Opportunities for professional growth and training. About VetPowered: VetPowered, LLC, named Veteran Owned Small Business of the Year in the United States is a rapidly growing San Diego based corporation specializing in manufacturing, welding, fabrication, machinery repair and customized training under private and US Government contracts. VetPowered employs a highly trained workforce that uses the latest in cutting edge CNC equipment. VetPowered is dedicated to bringing advanced manufacturing back to America. Key Job Functions: At VetPowered, the CNC Machinery Repair Technician you will play a crucial role in ensuring the optimal operation and maintenance of CNC machines. Your responsibilities will include troubleshooting, repair, and preventive maintenance to guarantee the efficiency and accuracy of CNC machining processes. This position requires a strong technical background, problem-solving skills, and the ability to work independently and collaboratively with manufacturing teams and outside organizations. Here is a detailed breakdown of your responsibilities: Essential Duties and Responsibilities: Machine Installation and Setup: • Install and set up CNC machines according to manufacturer specifications., • Conduct thorough testing and calibration to ensure accuracy and functionality.Routine Maintenance:, • Perform regular preventive maintenance on CNC machines to prevent breakdowns and optimize performance., • Diagnose and troubleshoot mechanical, electrical, and hydraulic issues with CNC machines., • Execute timely and effective repairs to minimize downtime and maintain production schedules., • Conduct inspections and tests to ensure CNC machines meet quality standards and produce accurate components., • Maintain accurate records of machine maintenance, repairs, and service history., • Document any modifications made to machine configurations or settings., • Provide training to machine operators on proper CNC machine operation and basic maintenance tasks., • Adhere to and enforce safety protocols and guidelines during all service and maintenance activities., • Collaborate with manufacturing engineers, production managers, and other stakeholders to optimize CNC machining processes., • Maintain a neat, clean, and professional appearance and uniform at all times., • Create extremely positive customer interactions by generating quotes, performing work, judiciously purchasing material, and satisfying our customers., • Be extremely punctual and always arrive at the worksite or customer location early., • Provide extremely high levels of Customer Support by always providing exceptionally professional, courteous, and cheerful service., • Technicians are responsible for being efficient on a contract, as well as reporting back to the scheduling team that they are under-scheduled to the 90% (or 7 hours) of billable time., • Assist with day-to-day operations around the shop and in the field to include but not limited to Machinery Repair & Maintenance, Machinery Cleaning, Diagnosing, Disassembly and Re-Assembly of Machinery, Equipment, Vehicles, and Tools., • Perform Facility Maintenance as required/directed., • Deliver and pickup parts, materials, supplies, water, etc. as required and/or directed., • Be familiar with the proper and safe use of basic hand and power tools., • Safely lift up to 50lbs with both hands and without the use of a forklift., • Other duties as may be assigned., • High school diploma or equivalent; additional technical certifications or education a plus., • 5+ years of industry experience working for a large OEM, or a third party service company such as DMG, Nakamura, Methods, Fanuc, DM Solutions, Ellison, Citizen, Makino, Star, Takisawa, Matsuura, Hardinge, Usach, Kellenberger, etc, • Proven experience as a CNC Machining Service Technician or in a similar role., • Strong knowledge of CNC machine operations, programming, and troubleshooting., • Proficiency in the use and employment of advanced machine tool calibration systems such as Renishaw QC-20 Ballbar and XL-80 Laser Interferometer., • Proficiency in reading and interpreting blueprints and technical drawings., • Familiarity with various CNC control systems and software., • Attention to Detail- The ability to accomplish a task while demonstrating a thorough concern for all the areas involved, no matter how small., • All In-Brings their whole self to work and giving it their all no matter how difficult the job or situation., • Accountable- Taking personal responsibility for their work, owns mistakes, communicate honestly rather than hiding the truth, does not blame others or make excuses., • Adaptable- Easily adjusts to changing circumstances. Pay: This pay does not include any opportunity for incentive compensation and is only reflective of the base pay for this position. The range of pay for this California-based position is $31.25-$40.87 hourly. The actual compensation offer will carefully consider a wide range of factors including your skills, qualifications, experience, and location. If your experience looks a little different from what we’ve listed and you think can bring value to VetPowered we would love to learn more about you and encourage you to apply. Benefits and Perks: VetPowered makes available comprehensive benefits the 1st of the month, following the date of hire. Options include Medical (50% employer contribution), dental and vision coverage (100% employer contribution), a 401k program with employer match up to $1,000 per year, 8 paid holidays, and paid time off. While the Company intends to maintain these employee benefits, it reserves the absolute right to modify, amend or terminate these benefits at any time and for any reason. Dress code: Position is provided VetPowered uniforms, and laundry service. Supervisory: None Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; sit; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is regularly required to push, move, lift or otherwise bear 10-30lbs (35-75lb W/M). Applications may include but are not limited to repetitive work using a computer keyboard, mouse and headphones while sitting and/or standing at an assigned work desk area. Work Environment: The employee works in a contract manufacturing facility in an urban industrial neighborhood. Other areas within the facility are mixed use such as administration, classrooms, welding, and machining areas. Employee may have additional environmental hazards such as: chemical, electrical, flammable, or mechanical in nature. E-Verify Compliance Statement: VetPowered, LLC participates in the E-Verify program. We ensure employment eligibility of all employees by using the E-Verify electronic verification system. Policy for Discrimination, Harassment and Retaliation Prevention: VetPowered, LLC is committed to providing a professional work environment free from discrimination and harassment, including discrimination and harassment based on a protected characteristic, and an environment free from retaliation for participating in any protected activity covered by this policy. VetPowered, LLC employees are expected to assume responsibility for maintaining a work environment that is free from discrimination, harassment, and retaliation. Employees are encouraged to promptly report conduct that they believe violates this policy so that we have an opportunity to address and resolve any concerns. Managers and supervisors are required to promptly report conduct that they believe violates this policy. We are committed to responding to alleged violations of this policy in a timely and fair manner and to taking appropriate action aimed at ending the prohibited conduct. EEO Statement: VetPowered, LLC is committed to providing equal employment opportunities to all employees, applicants, unpaid interns, and volunteers without regard to actual or perceived: race (including hair texture or protected hairstyles, e.g. braids, locks, and twists), color, religion, religious creed (including religious dress and grooming practices), national origin (including language use restrictions), ancestry, citizenship, disability (mental and physical) including HIV and AIDS, medical condition (including cancer and genetic characteristics), genetic information, marital status, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity, gender expression, age (40 years and over), sexual orientation, veteran and/or military status, family and medical leave status, domestic violence victim status, political affiliation, and any other status protected by federal, state, or local law. All openings are subject to change without notice, due to the volume of applications / resumes received, we are unable to respond to status inquiries. Please be assured that your information is being properly handled and forwarded to the appropriate hiring staff. If your skills and qualifications meet the needs of the job, you will be contacted. Powered by JazzHR BkCfxwUx77

Job DescriptionDescription: Field Maintenance Technician is a role whose preliminary focus will be to learn the CGP story, learn our core values, and live it in your day-to-day. CGP’s Field Technician will deliver a high level of customer service to property management, hospitality, retail and restaurant clients at the highest professional level. Using a variety of skills and tools, completes all tasks safely, efficiently, with high quality, and within efficient timeframes to ensure reliability. Requirements: In this role, you will: Performing Maintenance Activities for Clients: • Must call client location in advance for all work orders., • Must have necessary tools when entering the job site, according to the trade and nature of the job., • Must have the necessary paperwork and specific instructions related to the client and work order (sign off sheet; check in and out instructions, etc.), • Introduce yourself with the store manager or MOD and explain the reason for the visit., • Smile, shake hands, and explain what they can expect (length of time, possible disruptions to their business, etc.), • If we leave a jobsite to buy materials, we must always leave the job area safe and secure and notify the SM or MOD., • Tech must call the office to request a PO number each time material is purchased for a job. When purchases are made after hours the work order number should be used instead., • If a job is expected to exceed the NTE approved by the office, you must call for approval to proceed before exceeding this amount., • Tech must always clean up before leaving the jobsite., • Tech must speak with the store manager of MOD before leaving the premises to explain what has been done, or what is left to do, and ask if they have any questions before you leave., • Tech must get before and after photos of all work performed or inspected., • Tech must get the SM or MOD’s signature on the related paperwork., • Tech must call the office to inform them when each job has been completed., • Establish effective working relationships with employees., • Work with Project Manager when necessary for clarification on jobs., • Maintain exceptional customer service skills., • Complete job tickets and mileage logs accurately and thoroughly on a daily basis., • Record the use of truck stock that is used on respective job tickets., • CGP employees will follow guidelines that will protect the interest and safety of all employees and the organization as well as ensure job site etiquette., • Company provided uniforms will be worn at all times., • Proper work boots are to be worn at all times., • Employees must present themselves in a professional manner:, • No foul language., • Use of cell phones only when necessary and not in the presence of clients, in stores or while driving., • Being prepared when arriving on site to begin work., • Always inform clients when the task has been completed or when leaving the job site., • Company vehicles must be parked in the proper location on the job site. Never park in front of clients’ main entry., • Work area must be clean upon departure; good housekeeping is part of the job., • Do not block aisles, traffic lanes, fire exits, stairs, etc., • Do not use tools with split, broken, or loose handles. Keep cutting tools sharp and carry all tools in the proper fashion., • Never do anything that is unsafe in order to get the job done., • Use your personal protective equipment whenever it is required., • Know the correct use of hand power tools. Use the right tool for the job., • Must be a quick learner., • Must have the ability to use basic hand tools and other equipment., • Must be able to follow verbal or written directions., • Must be a safe driver., • Must be able to pick up and deliver supplies/materials., • Must be neat, clean and organized in the shop, company vehicle and job sites., • Perform preventative maintenance work as required., • Communication skills with dispatch/office., • Understand and use the different check in/check out requirements for each individual client., • Ability to carry and use tools and equipment, • Requisite ability required to drive motor vehicle, • Ability to frequently bend, stoop, and crawl, • The physical limitation of ladders, • Ascend and descend a ladder while wearing a tool belt that weighs 10 lbs., • Get in and out of a van to retrieve various items., • Lift miscellaneous tools and products within the warehouse and van racks., • Occasionally sits and climbs ladders/stairs; performs fine motor and pinching movements; pivots with feet, and bends, twists, and laterally flexes back; reaches at overhead, shoulder, knee, and floor levels; shoulder circumduction while driving (turning steering wheel); stoops, squats, crouches, kneels, crawls, and presses foot pedals; extends, flexes, rotates, and laterally flexes neck Minimum • 1 to 3 years maintenance trade experience with a like industry such a property management, hospitality, retail or restaurant facility services., • High school degree or GED equivalent preferred, • Valid state driver’s license and a good driving record, • Successfully meet (and maintain) background check requirements Division: Maintenance and Construction Reports to: Project Manager and/or Project Administrator Position Classification: Full Time FLSA Status: Non-Exempt Average Working Hours: Up to 40 hours per week plus On-Call Service (rotating), some nights & weekends as needed. EEO Statement The equal employment opportunity policy of this employer provides for a fair and equal employment opportunity for all associates and job applicants regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, age, marital status, familial status, disability, or genetic information, in compliance with applicable federal, state and local law. This employer hires and promotes individuals solely on the basis of their qualifications for the job to be filled.

Job DescriptionBenefits: • 401(k), • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Paid time off On the Move Get ready to get moving! This role will involve carrying and lifting boxes, decorating and packing doughnuts, sweeping or mopping, communicating with customers and fellow Krispy Kremers, filing orders and using the phone. You might lift up to 75 pounds from time to time. You'll need a driver's license too. What You Should Have You love the idea of bringing joy to others. You're experienced in sales, customer service, and managing others, you can communicate with others well, and you're friendly and approachable. What Will You Do? Guest Services Assistant Managers serve as a role model to team members and other Krispy Kremers. They set the tone and create an environment for exceptional customer service! You will know how to handle difficult situations with customers and other matters in the shop in a professional and humble way. We want all our customers to be happy with their experience in every one of our shops! You'll also ensure all our products are up to the highest standard- the Krispy Kreme standard. You'll maintain shop organization, answer the phone, and communicate with our Support Center teams when needed. Sales You'll work alongside the General Manager to achieve business plan objectives and profitability, and you'll help lead sales, which can include Hot Light times, retail sales, fundraising and suggestive selling. Production/Equipment You'll discover ways to maximize efficiency in daily doughnut-making, and you'll understand quality control procedures and coordinate production schedules to meet guest satisfaction. You'll get to know our equipment well by inspecting it and finding any issues that need fixing. Safety and Sanitation Make sure the shop is clean and safe! Shoes, floors, overall cleanliness is always a top priority. People You'll help the General Manager in recruiting, hiring, training, and all other needs, and you'll supervise shifts and demonstrate leadership. Accounting Assist the General Manager in managing income and expense budgets (Accounts Payable/Receivable) and reporting sales and other important information Requirement: All managers must be available to work any and all shifts. If you think you have what it takes and are eager to join a team of Rock Stars and Doughnut Enthusiasts, APPLY TODAY!

Job DescriptionBefore applying to this job opening, please review the Company's Applicant Privacy Policy located at: This Applicant Privacy Policy governs the Company's collection, use, and sharing of personal information you provide during the application process. Vehicle Acquisition Representative I - Kearny Mesa Hyundai Non-Exempt Job Summary: The Vehicle Acquisition Representative I supports the vehicle acquisition team by assisting in sourcing, evaluating, and processing vehicle purchases. This role involves administrative tasks, research, and coordination to ensure the efficient acquisition of quality inventory. Essential Functions: • Assist in identifying potential vehicle acquisition opportunities through online platforms, auctions, and trade-ins., • Maintain accurate records of vehicles acquired, including pricing, condition, and vendor information in the inventory management system., • Liaise with vendors, auction houses, and other dealerships to gather information about available vehicles and facilitate negotiations., • Help with the preliminary assessment of vehicle conditions and histories to assist the acquisition team in making informed decisions., • Conduct test drives to assess their mechanical performance., • Prepare and organize documents related to vehicle purchases, including purchase agreements and title transfers., • Assist in generating reports on vehicle inventory, acquisition costs, and market trends for the acquisition team., • Ensure all acquisition processes adhere to company policies and legal regulations., • Ensure all vehicle acquisitions comply with legal and regulatory requirements., • Maintain satisfactory attendance. Minimum Qualifications: • Knowledge of the automotive market and trends., • Valid driver’s license and safe driving record; required to have California driver's license within 10 days following date of hire., • Ability to lift up to 15 pounds., • Previous experience in automotive sales, administration, or a related field., • Strong organizational and multitasking abilities., • Excellent communication and interpersonal skills., • Basic knowledge of automotive terminology and market trends., • Familiarity with inventory management software and Microsoft Office Suite., • Frequently stands, walks, sits; uses hands; frequently reaches with hands and arms; frequently talks and hears., • Occasionally climbs or balances; occasionally stoops, kneels, crouches, squats or crawls; occasionally lifts up to 15 pounds., • Typical dealership or repair shop environment, including noise, dust, and varying temperatures., • May occasionally visit service bays or workshops to discuss vehicle issues with technicians., • Many odors may be present., • Noise moderate. Employee Benefits Include: • Medical, Dental, & Vision Insurance, • Employer Paid Life Insurance, • Employer Paid AD&D, • 401k (with Employer match), • Generous Vacation Package, • Inter-Company Transfers and Promotion Opportunities, • Tenure recognition and awards, • Vehicle Purchase Discount Program, • Vehicle Service Discount Program, • Golf Benefits at Maderas Golf Club (subject to qualification) If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is committed to providing reasonable accommodations to qualified individuals with disabilities to ensure equal employment opportunities and access to all programs, services, and activities. If you require accommodations to participate in the application process or to perform the essential functions of the job, please contact the HR Department to discuss your needs confidentially. We will work with you to identify appropriate accommodations based on your specific circumstances and in compliance with applicable laws. We are an Equal Opportunity Employer (M/F/D/V) and maintain a drug-free workplace. If you receive an offer of employment, it will be a conditional offer contingent on the successful completion of a pre-employment drug screen and background check. Sunroad is an Equal Employment opportunity and Affirmative Action Employer. We are committed to providing equal opportunity in all of our employment practices, including selection, race (including traits historically associated with race such as hair texture and protective hairstyles such as braids, locks, and twists); religion; religious creed; religious dress/grooming; color; age (40 and over); sex; sexual orientation; gender; gender identity (meaning a person’s identification as male, female, a gender different from the person’s sex at birth, or transgender); gender expression (including a person’s gender-related appearance or behavior, whether or not stereotypically associated with the person’s sex at birth); national origin; ancestry; citizenship status; uniform service member status; military or veteran status; marital status; pregnancy; childbirth; medical conditions related to pregnancy, childbirth, or breast feeding; medical condition (including cancer related or HIV/AIDS related); handicap; physical disability; mental disability; genetic characteristics; genetic information; or any other protected status in accordance with the requirements of all federal, state and local laws. Our Equal Employment Opportunity Policy applies equally to interns and volunteers. Company DescriptionFounded in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities: in 1977, Sunroad Enterprises is a diversified holding company based in San Diego. Sunroad consists of three distinct divisions: Automotive, Real Estate and Maderas Golf. With successful ventures across multiple countries, we bring a strategic focus to seeing developments come to life. Sunroad Enterprises is one of the largest minority-owned businesses in San Diego and has earned numerous quality commendations from local, regional, and national organizations. Please visit our website to learn more about our endeavors and career opportunities:

Directs and provides in collaboration with direct and ancillary patient care staff all aspects of the daily provision of safe and effective delivery of hemodialysis therapy to assigned patients. Entry level for RNs with less than 1 year of Nephrology Nursing experience in the last two years as a RN.

Job Description Job Summary The Housekeeper is responsible for cleaning and maintaining various public areas inside of the hotel, delivering amenities and requested items to guests, facilitating the cleaning of the guest rooms and various other laundry and housekeeping projects Responsibilities • Approaches all encounters with guest and employees in a friendly, service-oriented manner., • Complies with company, hotel, and brand standards which encourage a safe and efficient hotel operation., • Thoroughly cleans and maintains guest rooms according to standardsIncluding vacuuming carpet; changing linens; polishing mirrors; cleaning sink, toilet, tub, shower walls, shower curtain and floors., • Completes all stocking and organizational duties, including but not limited to, stocking guest supplies, cleaning supplies, and linen for housekeeping cart set-upQualifications, • 1-2 housekeeping or janitorial experience preferred., • Ability to stand and walk for 8 hours in a day. Ability to lift push pull up to 50lbs, • Excellent benefits include: Medical, dental, life, PTO, and 401k with company match for full-time associates, • We offer an excellent travel discount program., • Opportunity to grow, we promote from withinExcel Hotel Group is a fully integrated property ownership, management, and development company enjoying exciting growth. We believe that our family-driven culture is the backbone of our company.

Job description: Location: San Diego, CA Job Summary: The Sr. Security Manager oversees the regional security program at multiple administrative locations within the San Diego Offices and Security Contract Operations department. This position owns the responsibility for the creation and maintenance of a safe and secure environment within their assigned portfolio. This includes effective management of the departmental budget, proactive problem-solving skills, efficient scheduling of security officers and supervisors, identification assessment and mitigation of risk, and developing/executing strategies to ensure regulatory requirements are adhered to and departmental goals are met. Responsibilities/Duties Administrative Tasks: • Create a range of documents, spreadsheets, and presentations utilizing the Microsoft Office suite., • Track and respond to the support needs of field operations teams through email, phone calls, texts, and Microsoft Teams., • Partner with other departments to ensure timely completion of deadlines., • Track the progress of team members involved in projects., • Conduct research, procure, and distribute necessary items for the Security Contract Operations Department., • Arrange accommodations, supplies, meeting spaces, and food as required., • Collaborate with the Finance Operations department to coordinate large or high-cost purchases. Required Qualifications: • State regulated Guard Card, • Associates degree, or equivalent experience, • 4 years in healthcare security management, • Excellent organizational and time management skills, • Strong attention to detail and ability to maintain a high level of accuracy, • Excellent communication and interpersonal skills, • Proficiency in Microsoft Office products with an emphasis on Excel Preferred Qualifications: • Bachelor's degree in healthcare security and/or Business Administration, • 6 years in healthcare security management, • Knowledge of Healthcare Security, • Ability to develop and implement process improvements, • Strong problem-solving and decision-making skills, • Strong ability to work with little direct supervision Job Type: Full-time

Job Description Live Más with a career at Taco Bell! • Pay Rate: $20.00 per hour - $21.00 per hour We’re looking for people who love serving customers, have experience in the restaurant industry, and want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun, and friendly service to our customers, Taco Bell is the perfect place to learn, grow, and succeed! We offer the following: • A commitment to promote from within, • Training programs, • A reward and recognition culture, • Competitive pay, • Flexible schedules – day, night, evening, and late-night shifts, • Career advancement and professional development opportunities Team Member Responsibilities: • Interacting with customers: receiving orders, processing sales and payments, and resolving customer issues, • Preparing food products, • Maintaining product quality, • Monitoring all service equipment, • Maintaining uncompromising standards for a clean and safe work environment (per Labor Board, OSHA regulations, and company standards), • Unloading, stocking, and maintaining required inventory levels, • Champions recognition and motivation efforts Requirements: The ideal candidates must want to have fun serving great food to our customers! • Must be at least 16 years of age, • Accessibility to reliable and dependable transportation, • Excellent communication and organizational skills, • Physical dexterity required (ability to move up to 45 lbs. from one area to another), • Strong attendance and punctuality is a must, • Ability to operate a cash register and make change for other cashiers, • Basic math skills, • Completion of training certification, • Enthusiasm and willingness to learn, • Team player mentality, • Commitment to customer satisfaction, • Strong work ethic

We are seeking an experienced and proactive Safety Manager to oversee and enhance our organization’s safety programs and ensure compliance with all applicable regulations. This role will focus on developing, implementing, and managing health and safety programs in compliance with federal (OSHA) and state (Cal/OSHA) regulations. This role ensures that workplace environments, practices, and policies minimize risk to employees, contractors, and visitors. The Safety Manager will regularly inspect operations across various sites within the state, providing training and guidance to ensure compliance and the cultivation of a strong safety culture. Compensation Range: $70,000 - $80,000 annually About Us: One of the reasons why we are the nation’s leading parking management expert is because we recognize that “people” are what makes our company successful. It is this recognition that serves as the foundation and building block for our continued growth and success. Having been in business for over 74+ years, we understand what it means to earn “Every Thank You,” which is treating our clients, partners, guests, and team members with utmost respect and courtesy. As one of the largest privately held management companies, we have the experience, passion, and the know-how to withstand the test of time and to disrupt the new marketplace with exploding new technologies. Culture: We have a strong, distinctive culture – a culture that is heavily influenced by a shared vision, style, and values. Our company values are the glue that binds our business, clients, and team members. There are some common traits that contribute to our unique culture. Clear values, caring, loyalty, humility, and a deep commitment to community are just a few of them. These characteristics often steer our decision-making and define the way we treat our customers, clients, suppliers, and team members. We guard these values and attributes fiercely. About the Position: • Ensure full compliance with Occupational Safety and Health Administration (OSHA) and California Occupational Safety and Health Administration (Cal/OSHA) regulations., • Monitor and interpret changes to federal and state safety laws and regulations, updating company policies and procedures accordingly., • Develop, implement, and maintain comprehensive health and safety programs, including Injury and Illness Prevention Programs (IIPP), Hazard Communication, and Emergency Action Plans., • Conduct and document Job Hazard Analyses (JHAs) and Risk Assessments., • Conduct routine safety inspections and audits at various job sites across California to identify hazards and ensure compliance with safety protocols., • Recommend corrective actions and verify resolution of safety violations or deficiencies., • Develop and conduct safety training sessions, including OSHA 10/30-hour certification courses, toolbox talks, and site-specific safety orientations., • Work with the Learning & Development department to ensure that all training records and certifications are current and properly documented., • Lead investigations of accidents, incidents, and near-misses to determine root causes and implement corrective actions., • Prepare and maintain OSHA and Cal/OSHA-required documentation and reports, including the OSHA 300 log., • Promote a culture of safety by engaging employees at all levels, encouraging proactive identification of hazards, and reinforcing safe work practices., • Collaborate with department heads and field supervisors to reinforce safety accountability and awareness., • Travel throughout the state of California to perform on-site inspections, attend meetings, and oversee safety operations at multiple facilities or project sites. Your Qualifications • Bachelor’s degree in Occupational Health and Safety, Environmental Science, Industrial Engineering, or a related field (preferred). Equivalent experience in lieu of degree will be considered., • Proven experience as a Safety Manager or in a similar role., • Demonstrated knowledge of OSHA and Cal/OSHA standards and compliance procedures., • Strong analytical and problem-solving skills., • Proficiency in safety management software and reporting tools., • Certified Safety Professional (CSP) or OSHA 30-Hour or Trainer Authorization preferred, • Familiarity with risk management and emergency preparedness strategies., • Excellent verbal and written communication., • Proficient in Microsoft Office Suite and safety management software., • Ability to work independently and travel frequently within the state. What We Can Offer You for All Your Hard Work: • $70,000 - $80,000 annually, • Medical, dental, vision, life insurance coverage, • Flexible Spending Accounts, • 401k, • Vacation/Sick, • Holiday, • Discount programs Ace Parking is committed to the full inclusion of all qualified individuals. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment, Ace Parking will ensure that persons with disabilities are provided reasonable accommodation. If reasonable accommodation is needed, please email: describing the accommodation. EEO/AA Employer – Women, Minorities, Veterans, and Individuals with Disabilities are encouraged to apply.

Overview: As a Store Manager at WSS, your Neighborhood Shoe Store, you will be responsible for creating an engaging and motivating environment by leveraging technology to enhance the customer experience and streamline operations. You will be the expert in product knowledge, guiding your team to deliver exceptional service. By promoting a culture of one-touch resolution, you'll empower your team to address customer needs quickly and effectively, ensuring a seamless and efficient shopping experience. Your leadership will foster a positive store culture, drive performance, and ensure both customers and team members feel valued. Responsibilities: -Collaborate with management to drive conversion by analyzing sales data, identifying opportunities to engage customers, and ensuring the team delivers exceptional service. -Coach team members on effective selling techniques, encourage add-on sales, and ensure the store is visually appealing and well-stocked to maximize customer engagement. -Monitor and track key performance indicators (KPIs) such as sales (UPTs), conversion rates, and customer satisfaction. -Rally the Team and Strategize on adjustment necessary to meet target Goals. -Regularly review KPIs with teams ensuring they understand the importance of KPIs and how their individual performance impacts the store’s overall success. -Focus on recruiting top talent, providing comprehensive training, and offering ongoing development opportunities to build a high-performing team in a collaborative environment. -Manage work schedules, enforce company policies, and coach team members to deliver exceptional customer service. -Oversee inventory, cash handling, and operational procedures, maintaining a safe and clean work environment. -Ensure store performance aligns with business objectives, maintaining budgets and meeting shrink targets. -Review and ensure compliance with planograms, making adjustments as needed to optimize product placement, maximize sales, and maintain Visual Merchandising & Store Standards. -The role requires the ability to bend, twist, stoop, kneel, lift up to 50 lbs., and stand or walk for 8 hours daily. -Employees must climb ladders, maneuver boxes, and communicate effectively in person and on the phone while performing essential tasks. Benefits: -Paid Time Off, Paid Parental Leave -Life, Medical, Dental, and Vision Coverage – Individual and Family Plans -Self-Development & Recognition Programs -Advancement Opportunities -401k Retirement Plan and HSA Contributions -Stock Purchase Options -30%-50% Employee Discount - Friend & Family Events -Community Engagement Opportunities Required Experience: -High school diploma with 3+ years of retail management experience preferred. -Must have strong communication, leadership, and organizational skills. -Proficient in Microsoft Office, Point of Sale, and Time Keeping systems, with the ability to understand financial reports and analyze problems. -Proven track record in customer service and team development is essential. -Must be self-starters, capable of identifying strategic opportunities to increase KPIs and coach their team effectively. -Flexibility in working hours, including weekends and holidays & occasional overnights . -Ability to work within a 25-mile radius. Please note: This position is located in Escondido, CA About WSS WSS is the premier footwear retailer in the U.S. doing business in neighborhood-based stores. Consumers trust WSS for the best brands, greatest values, and largest selection of athletic, dress, fashion, and casual footwear for the entire family. Our large store format enables us to showcase thousands of styles from top brands like Nike, Jordan, Vans, Converse, Adidas, Puma, Skechers, etc. In addition, WSS carries high quality private brands augmenting the breadth of selection to deliver amazing value to our customers. Founded in Southern California in 1984 by entrepreneur Eric Alon, all WSS stores feature a unique retail format that displays every style and size. This allows customers to browse on their terms, in a hassle-free environment, engaging the friendly and knowledgeable sales staff when they choose. The success of this business model has allowed WSS to continue its rapid expansion into new markets. WSS currently operates stores throughout California, Nevada, Arizona, Texas and Florida. In October 2021 WSS was acquired by Foot Locker, Inc. WSS is now proudly one of Foot Locker’s banners under the WSS name. WSS is an Equal Opportunity Employer, committed to a diverse and inclusive work environment.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Employee discounts, • Free uniforms, • Health insurance You: are really interested in gadgets, but they have to look good figure out how to fix it instead of who's to blame paid for your own stuff as a teenager you love a good challenge We: work to deliver solutions that are simple to use are only as good as our last project believe systems, discipline and repetition set us free tell it how it is - PC is a personal computer work hard to create raving fans We believe in technology complementing your dcor and the way you live at home and at work. We believe in thinking differently. We do this by making our audio visual, network and automation solutions beautifully designed, simple to use and user friendly. We need a passionate problem solver who gets it right the first time, every time, to help us deliver our projects. We are not after a rookie here so prepare to wow us with what you have done. You can clearly demonstrate your prior professional growth & development milestones and you have a clear vision for your future development goals. We can provide a stimulating environment, ever changing projects, support and assistance in helping you to achieve your professional development goals, and all the usual tools of the trade. We are a growing & thriving, well-established design and build technology company with 30 employees serving the luxury residential construction market in the greater San Diego area. We provide state of the-art solutions from smart electrical, lighting design, mechanized shades, and audio/video solutions. What will you be doing day to day? • Proficiency in installing complex systems, installing projection & audio systems, networking, security and surveillance systems, and some light control system programming experience preferred., • Experience with construction and design/build industry., • Capability to work in an active, fast-paced environment, which requires a high-energy, self-motivated individual with the ability to quickly grasp new concepts, technologies, and installation methods., • Attention to detail, job-site cleanliness, and safety., • A clean criminal background and driving record will be confirmed., • CEDIA Level I or II Installer certification is preferred., • Travel 10 - 15% of the time., • Installation of structured cabling to include pulling, terminating, and testing Cat 6, RG6, HDMI, RCA, Speaker cables 8 Ohm and 70Volt, • Installation of all AV equipment including audio and video equipment, distributed audio, control systems (Contro4 & Savant), • Installation of Security Systems, • Installation of Surveillance Cameras, NVR's, • Wall mounting of TV's, • Assisting in making sure project deliverables and milestones are met including close out documentation and punch list items, • Communicate with project managers on personnel performance issues, • Follow all safety guidelines and client requirementsQualifications, • 2 years or more of verifiable experience as a full-time residential Audio-Visual Technician., • Experience working on construction sites and with hand tools, • Knowledge of Residential AV equipment, • Some ablity to troubleshoot Networks and AV equipment, • Ability to think and work independently, • Wiring and termination skills as well as proper installation techniques of all AV equipment, • Excellent written and oral communication skills, • Strong interpersonal and customer service skills, • Experience in reading/understanding architecture, electrical, structural & AV systems drawings, • A teachable disposition and a willing attitude toward continuing education, • Flexibility to work outside the job description when the need arises, • Experience working in a team-oriented, collaborative environment, • Analytical and problem-solving/troubleshooting skills, • Deductive reasoning skills, • PC and Network knowledge, • Computer proficiency including Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Internet Explorer), • Self-starter with keen attention to detail, • Ability to effectively prioritize and execute tasks in a high-pressure environment, • Possible out-of-town projects requiring hotel/multiple overnight trips (Travel 10 - 15% of the time)., • Must have a valid drivers license and safe driving record, • Must be able to pass a background check and pre-employment screeningsPhysical Demands, • Sitting, standing, stooping, and bending for long or extended periods of time., • Dexterity of hands and fingers to operate a computer keyboard, mouse, and power tools and to handle other office equipment., • Ability to lift and transport moderately heavy equipment (up to 50 pounds)., • Ability to climb a ladder, scaffolding, or be transported by lifts., • Ability to drive/operate a vehicle., • Although most work is performed inside, occasional outside activities daily/weekly/monthly may occur for short periods of time in a seasonal temperature-fluctuating environment., • All requirements may be modified to reasonably accommodate individuals with disabilities.Experience level:, • 2 years plusWeekly day range:, • Monday to Friday 7am 3:30pm (8 hours per day)Relocation Assistance: What companies do you admire and why? What will your old boss say about you? Apple or Android?

Job Description As a Behavioral Healthcare Specialist you will provide direct patient care to geriatric, adult, adolescent, or child patients with psychiatric disorders; to ensure the safety and well-being of these patients; to support the maintenance of therapeutic milieu. *Pay Range: $21/hr. to $30/hr. Available Shifts: Full Time, Part Time, and Per Diem : PM Shift (3:00 P.M. to 11:30 P.M.) and NOC Shift: (11:00 P.M. to 7:30 A.M.) Responsibilities: • Participate in input and follow through with regard to treatment planning, • Observe and identify patient’s problems, needs and strengths, and suggest treatment plan modifications, • Provide input on and implement patient discharge plans, • Accompany and transport patients as assigned, • Facilitate patient community meetings, • Maintain patient unit and related documentation, • Admit new patients to the unit, program and milieu, • Maintain a safe, orderly, and therapeutic environment for patients, • Assists patients with daily living activities consistent with treatment plans, • Carry out administrative and clerical assignments to support patient care, and organizational operations Requirements • High School Diploma, • 1 year Behavioral Healthcare experience HIGHLY preferred Full Time • 401K Retirement Plan, • Health Insurance, • Vision Insurance, • Dental Insurance, • Pet Insurance, • Healthcare Spending Account & Dependent Care Spending Account, • Life Insurance (Supplemental Life, Term, and Universal plans are also available.), • PTO Plan, • Holiday Premium Pay, • PTO Cash Out option, • Sick Pay, • Short and Long-Term Disability (with additional buy-in opportunities), • Tuition Reimbursement, • Employee Assistance Program, • ID Theft Protection, • Employee Appreciation Events, • 401K Retirement Plan, • Vision Insurance, • Dental Insurance, • Pet Insurance, • Healthcare Spending Account & Dependent Care Spending Account, • Life Insurance (Supplemental Life, Term, and Universal plans are also available.), • PTO Plan, • Holiday Premium Pay, • PTO Cash Out option, • Sick Pay, • Short and Long-Term Disability (with additional buy-in opportunities), • Tuition Reimbursement, • Employee Assistance Program, • ID Theft Protection, • Employee Appreciation Events, • 401K Retirement Plan, • Sick Pay

Job Description We are looking for a Certified Technicians to join our team. If you are tired of where you work and want to work in a clean and safe environment, come and see what we have to offer. We are looking for certified technicians to join our team. We provide an excellent working environment and temperature-controlled shop. At Perry Ford of National City, we strive to make every customer a customer for life. Happy employees make happy customers, and we reward individuals who are ready to work hard and stay motivated. Every employee at Perry Ford of National City is absolutely critical to its success. Our promise is to keep delivering the same award winning service and value that our community has come to expect from our dealership. WHAT WE OFFER • Medical and Dental, • Competitive wages, • Paid time off and vacation Perform work specified on the repair order with efficiency and in accordance with dealership * Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment * Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc. * Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs * Executing repairs under warranty to manufacturer specifications Qualifications * 2+ years of Service Technician experience required * Certified General Motors Technician * ASE Certification required * B level qualifications, including Diagnostic, Electrical and Engine Repair * Must hold a high school diploma or equivalent * Excellent customer service skills * Basic Computer skills * Positive, friendly attitude, along with a customer service mentality * Enjoy working in a fast paced environment * Team player * Must have a valid driver’s license * Ability to learn new technology, repair and service procedures and specifications Able to operate electronic diagnostic equipment

Job Description Live Más with a career at Taco Bell! • Pay Rate: $20.00 per hour - $21.00 per hour We’re looking for people who love serving customers, have experience in the restaurant industry, and want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun, and friendly service to our customers, Taco Bell is the perfect place to learn, grow, and succeed! We offer the following: • A commitment to promote from within, • Training programs, • A reward and recognition culture, • Competitive pay, • Flexible schedules – day, night, evening, and late-night shifts, • Career advancement and professional development opportunities Team Member Responsibilities: • Interacting with customers: receiving orders, processing sales and payments, and resolving customer issues, • Preparing food products, • Maintaining product quality, • Monitoring all service equipment, • Maintaining uncompromising standards for a clean and safe work environment (per Labor Board, OSHA regulations, and company standards), • Unloading, stocking, and maintaining required inventory levels, • Champions recognition and motivation efforts Requirements: The ideal candidates must want to have fun serving great food to our customers! • Must be at least 16 years of age, • Accessibility to reliable and dependable transportation, • Excellent communication and organizational skills, • Physical dexterity required (ability to move up to 45 lbs. from one area to another), • Strong attendance and punctuality is a must, • Ability to operate a cash register and make change for other cashiers, • Basic math skills, • Completion of training certification, • Enthusiasm and willingness to learn, • Team player mentality, • Commitment to customer satisfaction, • Strong work ethic

Job Description Job Summary The Housekeeper is responsible for cleaning and maintaining various public areas inside of the hotel, delivering amenities and requested items to guests, facilitating the cleaning of the guest rooms and various other laundry and housekeeping projects Responsibilities • Approaches all encounters with guest and employees in a friendly, service-oriented manner., • Complies with company, hotel, and brand standards which encourage a safe and efficient hotel operation., • Thoroughly cleans and maintains guest rooms according to standardsIncluding vacuuming carpet; changing linens; polishing mirrors; cleaning sink, toilet, tub, shower walls, shower curtain and floors., • Completes all stocking and organizational duties, including but not limited to, stocking guest supplies, cleaning supplies, and linen for housekeeping cart set-upQualifications, • 1-2 housekeeping or janitorial experience preferred., • Ability to stand and walk for 8 hours in a day. Ability to lift push pull up to 50lbs, • Excellent benefits include: Medical, dental, life, PTO, and 401k with company match for full-time associates, • We offer an excellent travel discount program., • Opportunity to grow, we promote from withinExcel Hotel Group is a fully integrated property ownership, management, and development company enjoying exciting growth. We believe that our family-driven culture is the backbone of our company.

Job Description Job Summary The Housekeeper is responsible for cleaning and maintaining various public areas inside of the hotel, delivering amenities and requested items to guests, facilitating the cleaning of the guest rooms and various other laundry and housekeeping projects Responsibilities • Approaches all encounters with guest and employees in a friendly, service-oriented manner., • Complies with company, hotel, and brand standards which encourage a safe and efficient hotel operation., • Thoroughly cleans and maintains guest rooms according to standardsIncluding vacuuming carpet; changing linens; polishing mirrors; cleaning sink, toilet, tub, shower walls, shower curtain and floors., • Completes all stocking and organizational duties, including but not limited to, stocking guest supplies, cleaning supplies, and linen for housekeeping cart set-upQualifications, • 1-2 housekeeping or janitorial experience preferred., • Ability to stand and walk for 8 hours in a day. Ability to lift push pull up to 50lbs, • Excellent benefits include: Medical, dental, life, PTO, and 401k with company match for full-time associates, • We offer an excellent travel discount program., • Opportunity to grow, we promote from withinExcel Hotel Group is a fully integrated property ownership, management, and development company enjoying exciting growth. We believe that our family-driven culture is the backbone of our company.

Ceramic Pro San Diego is seeking an experienced and driven General Manager to lead our elite team and oversee operations at our flagship 7,000 sq. ft. facility in Miramar—the cornerstone location of the global Ceramic Pro brand. This state-of-the-art studio services 125+ high-line vehicles per month, including Ferrari, Rolls-Royce, Porsche, and McLaren. The right candidate brings a strong blend of operational leadership, marketing savvy, sales expertise, and relationship management—all within a polished, luxury-focused environment where attention to detail and customer experience are everything. This is not your typical automotive shoo, this is where luxury lives. Use the link below and check out our Flagship Location! Qualifications • 3–5+ years experience in an operational leadership role, preferably in automotive, detailing, or service, • Strong leadership, delegation, and people management skills, • Familiarity with PPF, ceramic coatings, and window tinting (preferred), • QuickBooks and inventory software experience, • Excellent communication and customer service instincts, • Strong organizational, multitasking, and problem-solving ability, • Bachelor’s degree in Business, Management, or related field (preferred but not required) Key Responsibilities Operations • Oversee daily operations of a high-volume shop with 12+ staff, • Maintain and implement SOPs to ensure top-tier service and efficiency, • Hire, train, and mentor a high-performing team across multiple service lines (PPF, tint, ceramic coatings), • Conduct regular performance evaluations and team development sessions, • Ensure every customer interaction reflects the highest level of service, • Resolve customer issues with professionalism and urgency, • Collaborate with the executive and marketing teams to develop campaigns that drive revenue, • Monitor market trends and competitor activity, • Manage the shop’s budget, revenue targets, and monthly reporting, • Use QuickBooks and internal dashboards to monitor KPIs, • Ensure consistent, elite-level outcomes across PPF, tint, and coating installs, • Maintain a safe and compliant work environment, • Conduct regular training on safety and equipment use Compensation & Benefits • Competitive base salary (commensurate with experience), • Bonus opportunities based on performance, • Health insurance, • Paid time off & holidays, • Retirement plan, • Employee discounts on services and products

Job DescriptionSalary: $25-$30 Hourly Medical Assistant / Patient Navigator Revive Pathway is a Tribally owned clinic that treats a diverse population of patients, including Native and Non-Native people. We have the opportunity to provide whole person care, while managing patient substance use disorders, primary care, infectious disease, and mental health needs. We are building a team of dedicated and compassionate individuals. Revive Pathway brings an innovative model of highly individualized, compassionate care to patients with opioid use disorder. From the moment someone walks through the door of our state-of-the-art outpatient facility, they will encounter our thoughtfulness and intention for a humanizing and respectful experience with us. The comforting and safe setting of our nature-inspired facility and the friendly, professional attitude of our staff help to define our journey with each patientand with each otherfrom day one. Each employee at Revive Pathway creates their own ripple effect in the larger circles of the families and communities that we touch. Are you ready to make a difference with us? We are currently seeking a Medical Assistant / Patient Navigator to support our clinic in El Cajon, CA. This position, reporting to the Clinic Director, is an excellent opportunity for someone excited to make an immediate and lasting impact in a growing company. Position Overview: The Medical Assistant/Patient Navigator will be a source of kindness and empathy for patients who are trying to find their way to a better life. Revive Pathway treats patients with respect and honors their efforts to improve their health. The Patient Navigators role is to be positive, full of hope and to be present with our patients in their struggles as well assist them with connecting with resources including food, housing/ shelter, transportation and referrals to other compassionate providers. The ideal candidate will be a team player who is ready to jump into new challenges and opportunities, loves learning new things, and is interested in cross-training opportunities. We are looking for a Medical Assistant/Patient Navigator who understands how critical opioid treatment is and who wants to help to by being part of a whole-person treatment team where every employee makes a difference in our patients lives every day. Are you ready to make a difference one person at a time? Primary Duties: • Be available to patients daily to assist with critical resources and referrals., • Develop and work with agencies and service providers to facilitate coordination and information sharing; provide support services as applicable., • Provide transportation support, housing referrals and PCP and specialty care coordination., • Perform patient registration and admission functions, including entering referral data, income verification and insurance data, and ensure data remains up to date over time., • Establish and maintain positive working relationships with current and potential referral sources., • Maintain comprehensive working knowledge of community resources and assist patients in accessing community resources., • Develop, create, and maintain a resource file of available social service agencies and assistance providers in the target area for use in referring customers for needed services., • Be the face of the clinic to all patients and visitors, acting as a receptionist., • Answer calls politely and professionally. Refer calls to appropriate staff or take messages. Set or clear call forwarding when necessary. Check for messages with "on call" person or answering machine each morning., • Perform clerical, receptionist, and communication functions for the clinic as required., • Schedule new and returning patients with appropriate staff for medical and clinical counseling appointments. Record patient attendance, "no shows," and cancellations., • Participate in staff meetings and work with other administrative staff as required., • Maintain professional and congenial attitude toward coworkers, patients, agencies, and members in the community., • Use appropriate technology tools to accomplish job functions; understand and utilize available technology as customer service, communications, and data-gathering tools., • Assist patients to enroll in Medi-Cal., • Emergency Room liaison., • Work with jail and probation officials., • Participate in health fairs, community events, and other events where the target population gathers., • Collect body fluid samples for patients being admitted to treatment., • Administer TB, pregnancy, and breath alcohol tests to appropriate patients., • Label urine test bottles and prepare specimens for mailing or courier pick-up. Re-order supplies when shipment is depleted., • Ability to float to the MA or Front office position. Minimum Requirements: • Possess a Medical Assistant Certificate and a High School diploma or equivalent to diploma (college degree preferred)., • History of performing in a professional capacity., • Willing to follow Revive Pathway personnel policies., • Able to work the hours and days required by position, including daily 5:30 am start times., • Be willing to learn and able to deliver evidence-based practices in the treatment of substance use disorders., • Ability to provide health and TB clearance., • Must pass background check and urine drug screen. Skills & Abilities: • Passion for working with people, even on tough days., • Ability to treat everyone like they are the only person in the room., • Good listener, • Welcoming of differences and diversity., • Ability to work independently and to thrive as part of a team., • Ability to take direction and receive constructive feedback., • Power to stay calm, focused, and kind in stressful situations., • Organized and detail oriented., • Reliable, • Flexibility, versatility, and willingness to jump into new situations and challenges., • Humility, • Willingness to share your opinion., • Courage to stand up for your beliefs., • Ability to help create a safe environment for patients and staff. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this classification. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this classification, the employee is frequently required to stand, walk, sit, stoop, kneel, bend, use hands to keyboard or type, handle materials used in performing the essential functions of the classification, and reach with hands and arms. The employee will be asked to perform repetitive behaviors (e.g., typing and data entry). The employee must occasionally lift and/or move up to 25 pounds (think boxes of paper). Specific vision abilities required by this classification include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Sufficient clarity of speech and hearing abilities required by this classification includes those which permit the employee to discern verbal instructions and communicate effectively in person, by telephone. While performing the duties of this classification, the employee works in an office setting where the noise level in the work environment is usually moderate. The employee must also analyze and evaluate situations and adopt effective courses of action. Why Work for Us? At Revive Pathway, we share a journeywith patients, our coworkers, and the many communities of which we are a part. Our work is to build connection with individuals and families and to save lives in the process. The word revive is defined as restoration, regaining life, renewal, and flourishing again. These concepts are central to our identity and our vision. The actions and intentions of our team are rooted in Compassion, Growth, and Respect as we meet patients on their Pathway. We support our team through a competitive salary and benefits package and opportunities for continuing education and professional advancement. Revive Pathway staff will also be cross trained to meet the needs of patients and to make each day a success. On-the-job training will empower team members, as we believe the excellence of the clinic and the professional development of our staff complement one another. Please visit for more information.

Job DescriptionSalary: O&M Service Technician - Commercial Supervisor:Director of O&M Classification:Full-time, hourly The O&M (Operations & Maintenance) Service Technician - Commercial, is responsible for ensuring operational excellence within the maintenance and commissioning (Cx) aspects of the solar industry through a focus on troubleshooting, diagnosing, and maintaining a variety of PV and Solar Thermal systems. You must already reside in San Diego County or Riverside County. PRIMARY RESPONSIBILITIES & DUTIES * Troubleshoot PV and Solar Thermal system communication and performance issues. Locate / isolate faults and implement code compliant fixes in the field in a safe / efficient manner. * Document results and provide a technical report and concise descriptions of any quality issues, including those which have noted deficiencies requiring corrective action. * Inspect properties and materials for compliance with plans, specifications, and manufacturers requirements. * Perform training education program by rolling out our training program to different customer groups, such as PV asset owner, EPC teams, and/or installers. * Demonstrate understanding of and ability to follow operating, switching, maintenance, safety, and environmental procedures. * Working knowledge of industrial or power facility operation and maintenance. * Knowledge of local and national electrical and/or plumbing codes. * Provide feedback to sales/design/installteamsfor best practice improvement. * Coordinate warranty RMA process. * Commission PV systems to include testing such as IR scans, IV curve trace, torque checks, and visual inspections. * Conduct corrective maintenance solar panel replacement, inverter replacement, and communication problems. * In-depth experience testing and troubleshootingstandard building voltage up to the Utility meter level or interconnection point, including transformers (potential & current), breakers, relays, contactors, motors, and inverters. TEAM BUILDING & CULTURE * Embody and promote the Cal Solar core values and demonstrate those values in interactions with internal and external stakeholders. * Foster open communication, team building, and sharing of best practices amongst all employees, to help create a continuous learning environment that drives team knowledge & preparedness. * Encourage employees to take an active role and be accountable for their career growth. • Continually evaluate Cx and O&M processes, finding new means and methods (out-of-the-box thinking) & share best practices to help increase safety, profitability, quality, efficiency, etc. that can be captured within Standard Operating Procedures (SOPs). Support the Field Training Manager by rigorously promoting high-quality standards that are consistently utilized by all, while also proactively working to help refine/improve these standards. * Support efforts to recruit and hire field employees that fit our core values and safety/quality culture. * Champion Equal Employment Opportunity (EEO) and Affirmative Action Programs. TECHNICIAN LEVELS: TECH LEVEL 4:Requires a technician with an expert level understanding, experience, and proficiency with PV and Solar Thermal systems. * Ability to meet and exceed all requirements of Tech Level 3. * Highly Proficient in 2 or more Manufacturers (i.e. SolarEdge, Enphase, SMA, Yotta, CPS, etc.). * Ability to commission and troubleshoot multiple Solar Thermal & PV systems. * Master of AC/DC as it relates to troubleshooting. * OSHA 30 Certification, NFPA70 (Arc Flash). * Advanced experience in reading and understanding plans, manuals and documents. * Strong knowledge of Building, Electrical, and Plumbing Code as it relates to PV and Thermal systems. * Proficient in Google Applications Suite (Docs, Sheets, Gmail, etc.) and PDF/Bluebeam, Miter, and Raken Pro. * Capable of working in an office setting, communicating with manufacturers, clients and internal Cal Solar staff. * Inspect properties and materials for compliance with plans, specifications, & manufacturers and/or AHJ requirements. * Troubleshoot and diagnose any system with site specific visits or via the multiple monitoring platforms currently utilized, and train field or office staff on these platforms. TECH LEVEL 5:Requires a technician with an expert level understanding, experience, and highly proficiency with PV and Solar Thermal systems. * Ability to meet and exceed all requirements of Tech Level 4. * Expert knowledge in 3 or more Manufacturers (i.e. SolarEdge, Enphase, SMA, Yotta, CPS, Fronius, etc.). * Ability to manage multiple Service projects simultaneously while completing day to day tasks. * Master of AC/DC in all aspects. * OSHA 30 Certification, NFPA70 (Arc Flash), and possibly NABCEP or JW. * Superior experience in reading and understanding plans, manuals, & documents. Ability to quickly recognize differences or deviations of an installed system compared to the contract documents. * Expert in Building, Electrical, and Plumbing Code as it relates to PV and Thermal systems. * Strong knowledge / expertise in Google Applications Suite (Docs, Sheets, Gmail, etc.) and PDF/Bluebeam, Miter, and Raken Pro. * Adept at working in an office setting, communicating with manufacturers, clients and internal Cal Solar staff. Key Qualifications & Required Skills/Abilities • Four-year college degree and/or equivalent work experience (preferred)., • OSHA-30 certification (preferred) and a strong safety background with experience in Lockout Tag Out & Job Hazard Analysis., • Field experience in construction, Cx, operations, and maintenance of commercial, industrial, & utility solar construction projects. Experienced in Quality Assurance and Quality Control (QA/QC) throughout PV project life cycle. * Extensive technical knowledge of at least 3 different inverter manufacturers. • Strong understanding of the NEC (wire sizing, equipment ratings, installation requirements, theory, etc.), NFPA 70E electrical safety guidelines, and plumbing code, with ability to reference these codes as required. Working knowledge of Uniform Building Code (UBC) and building materials/techniques. * Strong understanding of grid-tied PV, solar domestic hot water, piping systems, pumped fluid circuits, and closed-loop heating systems. * Ability to read, understand, problem-solve, implement site-redesign, and mark-up (redline) electrical, plumbing, and structural plans. * Experience working directly with city/county permitting offices and inspectors. • Excellent verbal and written communication skills, with ability to write technical reports & communicate effectively with internal and external stakeholders., • Strong interpersonal and customer service skills/mindset., • Excellent organizational & attention to detail/process, superb analytical/problem-solving and decision-making skills., • Possess a positive attitude, ability to work independently, show initiative, and operate with a sense of urgency., • Excellent time management skills - ability to meet deadlines, prioritize tasks, delegate, and supportmultiple projects in various stages of construction., • Strong supervisory and leadership skills with the ability to effectively train, motivate, and hold others accountable. Punctual and able to attend regular team meetings and arrive at the job site on time. • Experience withGoogle Applications Suite (Docs, Sheets, Gmail, etc.), PDF/Bluebeam, Miter, and Raken. Ability to use fieldwork software technology tools and navigate numerous computer applications and technology independently. • Must pass a motor vehicle record check. Valid California Drivers License is required. Ability to work inside tight spaces, as well as outside, on various roof surfaces, and in varied weather conditions. * Ability to safely lift and carry 50+ pounds to chest height. • Bilingual (English-Spanish) preferred., • Ability to work extended hours required for optimal/efficient execution daily., • Able to travel at least 50% of the time within the state of CA. About Cal Solar, Inc.: Passionate About Renewable Energy? Then were looking for you! For more than 10 years, California Solar Integrators, Inc. (Cal Solar Inc) has developed multi-family and commercial solar projects throughout California. Our systems reliably deliver low-cost solar energy to businesses and multi-family housing communities. We are revitalizing the solar industry with the help of Utility Incentive Programs as well as supporting the state and federal legislative push towards renewable energy. Our experienced sales and estimating teams, engineers and installers, combined with our post-installation system support, provide complete turn-key solutions for new construction and retrofit properties. Service streams include Solar Photovoltaic, Solar Hot Water, EV Chargers, and Energy Storage. We are always seeking talented individuals! Join a focused and motivated team. Cal Solar, Inc. is an equal opportunity employer (EEO) committed to a culture based on respect and performance. Cal Solar, Inc. is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation. The starting hourly base pay for this role is between USD $50.00 to $60.00/hr. The actual base is dependent upon many factors, such as: location, training, transferable skills, work experience, business needs and market demands. The base pay range is subject to change and may be modified in the future. Benefits: Competitive salaries, Health/vision/dental insurance, 401(k) plan with 6% match, Paid holidays, and Flexible PTO. remote work

Starting Hourly Rate / Salario por Hora Inicial: $19.00 USD per hour ALL ABOUT TARGET As a Fortune 50 company with more than 400,000 team members worldwide, Target is an iconic brand and one of America's leading retailers. Working at Target means the opportunity to help all families discover the joy of everyday life. Caring for our communities is woven into who we are, and we invest in the places we collectively live, work and play. We prioritize relationships, fuel and develop talent by creating growth opportunities, and succeed as one Target team. At our core, our purpose is ingrained in who we are, what we value, and how we work. It's how we care, grow, and win together. ALL ABOUT GENERAL MERCHANDISE Experts of operations, process and efficiency who enable a consistent experience for our guests by ensuring product is set, in-stock, accurately priced and signed on the sales floor. The General Merchandise and Food Sales team leads inbound, outbound, replenishment, inventory accuracy, presentation, pricing and promotional signing processes for all General Merchandise (GM) areas of the store. This team leads Food & Beverage and Food Service, providing a fresh and food safe experience. Experts enable efficient delivery to our guests by owning pick, pack and ship fulfillment work. At Target, we believe in our team members having meaningful experiences that help them build and develop skills for a career. The role of a General Merchandise Expert can provide you with the: • Knowledge of guest service fundamentals and experience supporting a guest first culture across the store, • Experience in retail business fundamentals including: department sales trends, inventory management, and process efficiency and improvement, • Experience executing daily/weekly workload to support business priorities and deliver on sales goals As a General Merchandise Expert, no two days are ever the same, but a typical day will most likely include the following responsibilities: • Create a welcoming experience by authentically greeting all guests, • Observe to quickly understand whether a guest needs assistance or wants to interact. Follow body language and verbal clues to tailor your approach, • Engage with guests in a genuine way, which include asking questions to better understand their specific needs, • Be knowledgeable about the tools, products, and services available in the total store, and specific to your area, to solve issues for the guest and improve their experience, • Thank the guest in a genuine way and let them know we’re happy they chose to shop at Target, • Be knowledgeable of GM areas to ensure sales floor is zoned, in stock and accurately signed and priced for guests, • Acknowledge guests as you complete workload with minimal guest disruption; partner with leadership to prioritize daily workload based on business and guest needs, • Ensure regular and promotional signing is set accurately for GM categories and be knowledgeable of products in the ad, • Execute inbound, replenishment, backroom and signing processes for GM areas, • Execute processes including pricing, presentation sets, and inventory accuracy as directed by your leader for all areas, • Understand how operational procedures, like planogram (POG) ties, product capacities and salesfloor quantities impact shortage, profitability, in store replenishment and inventory accuracy, • Operate power equipment only if certified, • Follow processes accurately with attention to detail, monitor own progress, • Demonstrate a culture of ethical conduct, safety and compliance, • Work in a safe manner at all times to benefit yourself and others; identify and correct hazards; comply with all safety policies and best practices, • Support guest services such as back-up cashier, and digital fulfillment processes and maintain compliance culture while executing those duties, such as federal, state, and local adult beverage laws, • All other duties based on business needs WHAT WE ARE LOOKING FOR We might be a great match if: • Working in a fun and energetic environment makes you excited…. We work efficiently and as a team to deliver for our guests, • Providing service to our guests that makes them say I LOVE TARGET! excites you…. That’s why we love working at Target, • Stocking, Setting and Selling Target products sounds like your thing… That’s the core of what we do, • You aren’t looking for Monday thru Friday job where you are at a computer all day… We are busy all day (especially on the weekends), making it easy for the guest to feel welcomed, inspired and rewarded The good news is that we have some amazing training that will help teach you everything you need to know to be a General Merchandise Expert. But, there are a few skills you should have from the get-go: • Welcoming and helpful attitude toward guests and other team members, • Ability to communicate on multiple frequency devices and operate handheld scanners, and other technology equipment as directed, • Work both independently and with a team, • Resolve guest questions quickly on the spot, • Attention to detail and follow a multi-step processes, • Capability to remain focused and composed in a fast-paced environment and accomplish multiple tasks within established timeframes We are an awesome place to work and care about our teams, so we want to make sure we are clear on a few more basics that we expect: • Accurately handle cash register operations as needed, • Climb up and down ladders, • Scan, handle and move merchandise efficiently and safely, including frequently lifting or moving merchandise up to 44 pounds, • Flexible work schedule (e.g., nights, weekends and holidays) reliable and prompt attendance necessary, • Capable of working in and exposure to varying temperatures, humidity, and other elements while performing certain job duties including but not limited to Drive-Up, carryout, etc., • Ability to remain mobile for the duration of a scheduled shift (shift length may vary) Find competitive benefits from financial and education to well-being and beyond at . Target will consider for employment qualified applicants with criminal histories in a manner consistent with the San Francisco and City of Los Angeles Fair Chance Ordinances. Americans with Disabilities Act (ADA) Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or reach out to Guest Services at 1-800-440-0680 for additional information. Applications for this role are accepted on an ongoing basis and there is no application deadline. Las solicitudes para este puesto se aceptan de forma continua y no hay fecha límite de solicitud.

Job Description Our Smart Security Pro’s mission is to show our residential customers that they are truly valued as we have a strong emphasis on providing an unparalleled 5-Star experience unmatched in the Smart Security industry. As an SSP, you'll play a pivotal role in what matters most to our customers: enhancing the safety and security of their families and homes. We know what it takes to be successful here at SafeStreets. If you have a passion for making a difference in people’s lives, a strong sales background, and a winning mindset, we will assist you in creating a seamless transition into a new career. The process is simple. There is no cold calling or D2D sales involved. We get your foot in the door by connecting customers to you who are already interested in ADT home security. In-home appointments are scheduled and provided for you by our Inside Sales team. By helping customers review their security options on-site and move forward with a custom home security package designed by you, you will have the opportunity to earn uncapped sales commissions based on how the homeowner decides to protect their home. The best part is you control the process from start to finish, leaving the customer better protected than after you arrived. Looking to change industries? Feel confident in knowing that we have Pro’s with backgrounds in every type of industry that have made a seamless and successful transition to the role of an SSP. With a paid training program provided, we have all the tools to teach you what you need to know. What do you need to be qualified for this position? Nothing more than a passion for customer service, a strong sales background, and a desire to help keep others safe and secure. We provide the tools/equipment, paid training, and post-training support you will need. We even hand deliver the customers to you – no need to go searching for your own leads! SafeStreets is always evolving! SafeStreets set out to make some big changes to kick off 2025 with how our Smart Security Pros are paid and we now have the best compensation plan in the industry! Here's what our SSP's look forward to: • Highest sales commission opportunities in the industry with our technicians earning on average 25% commission - UNCAPPED!, • More than 30% of our field earned over $100k+ in 2024, • Increased Mileage pay with pay kicking in nearly 3x earlier than previously, • Paid for every installation action taken on site, • Same-day and Holiday bonuses, • More upgrade commission options, • Doubled Referral pay opportunity What we Offer: Competitive base salary with generous and uncapped commission structure Company-provided equipment and select tools Remote and independent work environment Ongoing training and professional development opportunities Opportunities for career advancement within a rapidly growing organization Scheduling flexibility Medical/Dental/Vision/Life Insurance/401K The Responsibilities: Helping homeowners create customized Smart Security solutions for their personal needs 5-star Customer interaction – every day is a new opportunity; you’ll be the first face-to-face contact our customers have with SafeStreets! Customized installation, troubleshooting, and demonstration of ADT-monitored security systems Qualifications: Entrepreneurial and career oriented mindset Excellent communication, negotiation, and interpersonal skills Reliable vehicle and valid driver's license Proof of vehicle insurance (100/300/100 minimum) Smartphone/tablet SafeStreets values the safety of our employees and customers. That is why we are committed to providing personal protective equipment (PPE) or stipends to our technicians to further ensure their safety. This job entails meeting certain physical requirements, including the ability to work above head level, carry loads of 30-50 pounds (such as equipment boxes and ladders), operate power tools, and navigate confined spaces like attics and crawl spaces. Safe Streets is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or terminate, will be based on merit, competence, performance, and business needs. Safe Streets does not discriminate on the basis of race, color, religion, sex (including pregnancy and gender identity), marital status, age, national origin, sexual orientation, disability, genetic information, military service, or any other status protected under federal, state, or local law. Applicants have rights under Federal Employment Laws. FMLA - EEO- EPPA -

Job Description Job Responsibilities: • Follow SOPs & work instructions, • Operate & maintain equipment as needed, • Perform visual inspections & QC, • Escalate any issues to management, • Identify & dispose defective materials, • Support entire manufacturing process, • Ensure proper documentation, • Maintain safe & clean work environment, • Cross-train in different areas of manufacturing, • Other duties as needed Job Requirements: • High school diploma or GED, • 1+ years of GMP manufacturing environment experience, • Ability to follow work instructions & SOPs, • Team player, • Ability to follow instructions, • Strong attention to detailCompany DescriptionWith over two decades of internal recruitment support, RedBrick Staffing has been able to fine-tune a tried and true strategy of locating talent through a personalized recruitment process. With a background in finding highly qualified candidates ranging from startup to fortune 500 companies, we tailor our search to your individual requirements. A minority & veteran-owned & operated staffing firm.

Job Description Job Summary The Laundry Attendant is responsible for cleaning, drying, folding, and storing bed linens, bathroom linens and Food & Beverage linens in accordance with Hotel standards using laundry machinery. Responsibilities • Approaches all encounters with guests and employees in a friendly, service-oriented manner., • Complies with company, hotel, and brand standards which encourage a safe and efficient hotel operation., • Sorts soiled linens wearing gloves., • Loads washers with soiled linens., • Unloads washers with clean, wet linen., • Loads dryers with clean, wet linen., • Adjusts washer & dryers for proper settings., • Folds and stores clean dry towels, washcloths, sheets, pillowcases, napkins, tablecloths., • Refills/replenishes laundry chemicals.Qualifications, • 1-2 years related work experience, • Ability to stand and walk for 8 hours in a day. Ability to lift push pull up to 50lbs,, • Must be able to follow verbal directions, and complete assigned tasks on schedule.Benefits/Perks, • Excellent benefits include: Medical, dental, life, PTO, and 401k with company match for full-time associates, • We offer an excellent travel discount program., • Opportunity to grow, we promote from withinExcel Hotel Group is a fully integrated property ownership, management, and development company enjoying exciting growth. We believe that our family-driven culture is the backbone of our company.

Job Description Job Summary The Housekeeper is responsible for cleaning and maintaining various public areas inside of the hotel, delivering amenities and requested items to guests, facilitating the cleaning of the guest rooms and various other laundry and housekeeping projects Responsibilities • Approaches all encounters with guest and employees in a friendly, service-oriented manner., • Complies with company, hotel, and brand standards which encourage a safe and efficient hotel operation., • Thoroughly cleans and maintains guest rooms according to standardsIncluding vacuuming carpet; changing linens; polishing mirrors; cleaning sink, toilet, tub, shower walls, shower curtain and floors., • Completes all stocking and organizational duties, including but not limited to, stocking guest supplies, cleaning supplies, and linen for housekeeping cart set-upQualifications, • 1-2 housekeeping or janitorial experience preferred., • Ability to stand and walk for 8 hours in a day. Ability to lift push pull up to 50lbs, • Excellent benefits include: Medical, dental, life, PTO, and 401k with company match for full-time associates, • We offer an excellent travel discount program., • Opportunity to grow, we promote from withinExcel Hotel Group is a fully integrated property ownership, management, and development company enjoying exciting growth. We believe that our family-driven culture is the backbone of our company.

Company Description JB Pacific is a general contractor based in San Diego, CA, specializing in life science, healthcare, and commercial construction projects along the west coast. We are dedicated to delivering high-quality projects that exceed client expectations and positively impact the community. Role Description This is a full-time on-site role for a General Superintendent at JB Pacific in San Diego, CA. The General Superintendent will be responsible for overseeing day-to-day operations, managing subcontractors, manpower, provide support to all project teams ensuring project timelines are met, while maintaining a safe work environment. The General Superintendent reports to VP of Operations and President. They shall take ownership of field staff and support safety oversight and quality control. Responsibilities • Project team development, • Constructability reviews, • Develop construction schedules in Preconstruction, • Review schedules during construction with project teams, • Procurement planning guidance, • Pre-Task planning guidance, • Quality assurance and development, • Daily reporting oversight, • Risk Management, • Site Safety Plan development and implementation, • Site inspections and material verification, • Site logistics development, • As-Built documentation, • Implement and oversee company training and mentoring for field personnel including superintendents, foreman, laborers and safety coordinators. Qualifications • Construction Management, Project Management, and Site Supervision, • Knowledge of building codes, regulations, and safety protocols, • Experience in managing subcontractors and construction teams, • 20 or more years of professional experience in this field, • Strong communication and leadership skills, • Problem-solving and decision-making abilities, • Ability to work in a fast-paced environment and meet deadlines, • OSHA certification and relevant construction certifications are a plus Candidate shall possess strong construction knowledge and have a background in both ground up and tenant improvement projects. Candidate shall have prior experience leading successful project teams and coordinating with self-performing staff. The ideal candidate is self-motivated, has good written and oral communication skills, and strong work ethic. Candidate shall have prior experience managing projects in the $50M - $150M project size. Our General Superintendent is an additional team resource and front-line communicator with our clients to ensure successful project delivery. At JB Pacific we are committed to the development and success of our employees. We offer a competitive compensation and benefit package for this position. We strive to provide a collaborative environment with a steadfast dedication to being great builders. We are planners, collaborators, builders, fathers, mothers, outdoorsman, surfers, skiers, stewards of our environment, soccer coaches, snowboarders, bookworms, coffee drinkers, we work hard, we play hard, and we are leaders. We are JB Pacific! Join our team and grow with us!

Water Works is seeking a Plant Leader for our San Diego office. The Plant Leader is responsible for the SQIDCP (Supply, Quality, Delivery, Inventory, Cost & People) performance on the execution of the projects for the plant. Key Accountabilities / Responsibilities Health, Safety & Environment • Enforce safety protocols to maintain a safe work environment., • Ensure compliance with site regulations and Group standards., • Promote sustainable manufacturing (e.g., waste reduction, energy efficiency)., • Implement and maintain quality control standards to meet customer and industry expectations., • Ensure compliance with quality certifications (e.g., ISO 9001)., • Optimize efficiency and quality through lean principles and best practices., • Champion continuous improvement (e.g., Kaizen) and innovation., • Resource Management: Optimize labor, materials, and equipment to meet production and cost targets., • Production Planning: Align schedules with customer demand and inventory targets., • Oversee daily plant operations to meet financial and operational goals., • Lead investment proposals and deploy strategic initiatives (e.g., Clean Water, Operations Roadmap)., • Conduct daily action meetings and manage key plant functions (maintenance, quality, logistics, etc.)., • Ensure TPM principles, standardization, flexibility, and adaptability across operations., • Lead and develop teams through performance management and regular feedback., • Foster trust, collaboration, and a culture aligned with company values., • Support training, succession planning, and talent development., • Implement corporate policies on HR, sustainability, and innovation., • Communicate company strategy and drive relevant initiatives. Required Minimum Qualifications • Engineer's degree or equivalent, • Strong knowledge of continuous improvement tools and methodologies, as well as flow and planning management, • In-depth understanding of best practices and production standards within operations, • Good knowledge of implementing manufacturing concepts into end-to-end supply chains, • Excellent knowledge of SQDCIP standards (Safety, Quality, Cost, Customer Satisfaction, etc.), • Experience in implementing strategies and strategic initiatives in a complex industry, including working in large international industrial environments., • 5-10 years of experience in Plant or Autonomous Production Unit management in an industrial and international environment, • Experience leading and/or creating processes preferably within leadership of cross functional groups and disciplines., • Experience leading diverse teams and processes., • Strong knowledge of best practices and relevant systems within Operations., • Have been exposed in roles or projects outside Operations., • focus knowledge of best practices and relevant systems within Operations., • Focus on Continues Elimination of the “7 wastes.”, • Knowledge of P&L and Balance sheet., • Knowledge of SIOP and Physical flows., • Knowledge of safety risk assessment., • Knows how to define and implement action plans for all industrial operations integrating compliance with all industrial regulations in a new environment., • Proficiency in professional-level English is essential.

PURPOSE AND SCOPE:Supports FMCNA's mission, vision, core values and customer service philosophy. Adheres to the FMCNA Compliance Program, including following all regulatory and FMS policy requirements. Functions as the hemodialysis team leader in the provision of chronic hemodialysis care and treatment. Provides day to day direction and supervision to assigned direct patient care staff. Communicates with the physician and other members of the healthcare team to interpret, adjust, and complete patient care plans. Provides safe, effective delivery of patient care in compliance with standards outlined in the facility procedure manual, as well as regulations set forth by the company, state, and federal agencies. DUTIES / ACTIVITIES CUSTOMER SERVICE: • Responsible for driving the FMS culture through values and customer service standards., • Accountable for outstanding customer service to all external and internal customers., • Develops and maintains effective relationships through effective and timely communication. General and Staff Related: • Provide day to day guidance, support and direction to direct patient care staff, providing informal feedback on an ongoing basis and formal feedback input for the annual performance evaluation. Participate in the department staffing and the appropriate hiring, firing and disciplinary actions. Recommend disciplinary action to Clinical Manager and initiate as appropriate., • Ensure compliance with all company and facility approved procedures and policies as well as regulations set forth by state and federal agencies in clinics with more than 100 patients., • Approve or disapprove time or personnel schedule changes in the absence on the Clinical Manager ensuring compliance with applicable regulations, policies and procedures for documenting time of work hours for staff members on assigned shift., • Participate in patient care plan meetings., • Maintain knowledge in the current practices related to the principles and techniques of dialysis by participating in all scheduled in-services., • Train and orient staff as necessary., • Routinely observe and guide direct patient care staff for appropriate technique and adherence to facility policies and procedures., • Promote and assist with compliance to OSHA programs in order to maintain a safe and clean working environment., • Maintain overall shift operation in a safe, efficient, and effective matter., • With Clinical Manager conduct staff meetings at least monthly or as needed to keep patient care staff informed of changes in patient care needs or operations to improve delivery of care., • Meet routinely with the Clinical Manager to discuss personnel and patient care status, issues, and information., • Supervise all documentation of patient information., • Assess daily patient care needs and develop and distribute patient care assignments appropriately., • Assume primary responsibility in an emergency situation., • Asses patient needs, respond to dialysis treatments, and communicate concerns to rounding physician. Implement changes in patient care/treatment as directed., • Monitor and supervise all patient care activity during dialysis and assist as necessary., • Collaborate with direct patient care team in making decisions to benefit patient care., • Continuously monitor patient's condition with regards to problems and potential complications associated with dialysis., • Administer medications to patients per physician's orders., • Act as the subject matter expert and as a resource for staff members., • Supervise and participate in completion of short and long term care plans., • Admit new patients according to facility procedure., • Supervise the safe and effective use of all equipment involved in direct patient care., • Operate all dialysis related and emergency equipment safely and efficiently when needed., • Perform required testing and verification and initial the checklist for start-up and shut-down procedures as outlined in the Technical Services Manual., • Assist with special projects or other duties as assigned by the Clinical Manager, • Assist with the interviewing of potential direct patient care staff as requested., • Promote efficient use of medical supplies., • Attend and participate in monthly Quality Assurance meetings., • Graduate of an accredited school of Nursing (R.N.), • Minimum of 9 months of nursing experience, plus 3 months of specialized experience providing clinical nursing care to dialysis patients, in either a chronic or acute setting., • Medical/surgical nursing preferred., • Supervisory or management experience preferred., • Certified in CPR or successfully complete course in CPR certification., • Good communication skills - verbal and written. The rate of pay for this position will depend on the successful candidate’s work location and qualifications, including relevant education, work experience, skills, and competencies. Hourly Rate: $23.00 - $67.00 Benefit Overview: This position offers a comprehensive benefits package including medical, dental, and vision insurance, a 401(k) with company match, paid time off, parental leave. EO/AA Employer: Minorities/Females/Veterans/Disability/Sexual Orientation/Gender Identity Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Experienced Insurance Coverage Attorney in CA - REMOTE Ready to be on the front lines of some of the most important issues in the insurance industry today? Our Insurance Coverage team has openings for talented Insurance Coverage Attorneys in our LA and San Francisco offices. Open to REMOTE as well. The hired candidates will work with insurers concerning insurance coverage, litigation, and alternative dispute resolution. This is a team environment with incredible opportunity and experience to be had! Must be admitted to practice in California. Our salaries are market-rate and we offer top-notch benefits. Remote or hybrid work options will be considered for the right candidate. Role Overview: We seek a skilled Insurance Coverage Attorney with 3+ years of experience to manage complex litigation matters, provide strategic counsel on insurance disputes, and represent clients in various legal proceedings. Qualifications: • Juris Doctor (J.D.) from an accredited law school., • Active membership in the California State Bar., • Proven track record in Insurance Coverage, with 3+ years of experience., • Strong analytical skills and attention to detail. Salary and Other Compensation: The annual salary for this position is between $150,000 – $250,000 annually. Factors which may affect pay within this range include geography/market, skills, education, experience, and other qualifications of the successful candidate. Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: • Medical insurance, • Dental insurance, • Vision insurance, • Paid time off (details TBD), • Paid sick and safe time (details TBD), • Paid vacation time (details TBD), • Paid parental leave (details TBD), • Paid holidays annually (details TBD) Apply now with your resume, cover letter, and writing samples!

Endeavor Agency () is a commercial real estate talent agency providing high touch recruitment services throughout California and major western US cities. Endeavor has engaged with a dynamic, privately held real estate development and operating company seeking a Senior Construction Superintendent to join their San Diego, CA based team. The primary responsibilities include working directly with the Construction Manager and the VP of Construction to derive and define scopes of work, track the project budget, and maintain the project timeline. Responsibilities: • On-site, the Superintendent coordinates all subcontractors and oversees the day-to-day activities of construction, including scheduling, inspections, quality control, safety, monitoring of construction budgets, and accountability for all related expenditures., • Work closely with Project Management to obtain all necessary approvals, including utilities, permits, plan checks, and Certificates of Occupancy., • Direct subcontractors and subordinates., • Provide periodic written reporting and scheduling updates., • Evaluate situations and render decisions on certain issues without immediate supervision., • Understand and implement OSHA safety requirements site-wide., • Knowledgeable of SWPPP requirements, site-wide, and mitigate any impact to the outlying community., • Maintain a safe and compliant work site daily., • Relate favorably with others beyond giving and receiving instructions; perform work activities requiring negotiating, instructing, supervising, persuading or speaking with others and responding appropriately. Qualifications: • Relevant experience with complex multifamily development projects., • Experience working with city and other inspectors on construction projects., • Be proficient in Microsoft Word, Excel, Outlook and Project software., • Excellent written and verbal communication., • Demonstrate a professional demeanor., • Higher education or technical training a plus.

Job Description Field Service Technician can live ANYWHERE in the country!!!! SUMMARY: This position is responsible for maintaining effective customer support by providing service to all Company machinery at a customer's location under limited supervision at INDEX Corporation. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Diagnoses and troubleshoots machinery malfunctions at customer site, • Execute Installs, repairs, inspections, sets ups and tests on two machine product lines targeted by Regional Service Manager, with minimal guidance of senior and lead service technician., • Dismantles defective components, equipment or parts and installs, adjusts and tests new or repaired parts to Index standards., • High proficiency on multiple product lines with minimal guidance and supervision, • Cleans and lubricates shafts, bearings gears and other parts of machinery., • Installs, creates machine archives, repairs electrical and electronic components of machinery and equipment such as transformers and wiring., • Installs and repairs hydraulic, coolant or pneumatic systems that are associated with the machine., • Returns all remaining parts with the correct paper work and correct packaging to the Company's office., • Submits all service paper work and expenses weekly, and on time. Updates IUS team with daily updates., • Maintains a neatly organized, clean and safe work area., • Adheres to all customer and Index specified safety requirements, • Maintains the highest level of professionalism and integrity while working on the customer site or in the office. SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty and responsibility according to the requirements of INDEX Corporation. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPETENCIES: Company-related Competencies – To perform this job successfully, all employees of INDEX Corporation must demonstrate the following competencies: Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Teamwork - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments. Job-related Competencies – To perform this job successfully, incumbents in this job should demonstrate the following competencies: Analytical – Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures. Project Management – Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Adaptability – Adapts to changes in the work environment; Manages competing demands; changes approach or method to best fit the situation; Able to deal with frequent change, delays or unexpected events. EDUCATION and/or EXPERIENCE: Associate's degree (A.A.) or equivalent from a two-year college or technical school in electronics, hydraulics, or other mechanical-related field; and two year's related experience and/or training; or equivalent combination of education and experience is required. Previous experience in a manufacturing environment where field service skills were essential to the overall operations of the organization is required. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of an organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all unites of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS: A valid driver's license is required for this position. OTHER SKILLS AND ABILITIES: Computer software skills required include: Microsoft Outlook, Word, Excel, PowerPoint and Adobe. Ability to operate a printer, copy machine, scanner and other office equipment is desired. Employee must have the ability to adapt and conform to shifting priorities and demands and execute accordingly. In addition, this position requires an understanding of mechanical, electrical and hydraulic principles and practices, while paying close attention to detail is essential. OTHER QUALIFICATIONS: A strong knowledge of the Company's products and services is required. This position requires both domestic and international travel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties and responsibilities. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently will stand; and walk. The employee occasionally will climb or balance; stoop, kneel, crouch or crawl; taste or smell; and lift and/or move up to 50 pounds without an assistive device. Specific vision abilities required by this job include close vision (clear vision at 20 inches or less), distance vision (clear vision at 20 feet or more), color vision (ability to identify and distinguish colors), peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point), depth perception (three-dimensional vision, ability to judge distances and spatial relationships), and the ability to adjust focus (ability to adjust the eye to bring an object into sharp focus). WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The normal office hours at INDEX Corporation are 8:00 a.m. to 5:00 p.m., Monday through Friday. However, employees in this position may be required to work additional hours to meet the demands of the job. While performing the duties of this job, the employee is frequently exposed to outdoor weather conditions and is occasionally exposed to working near moving mechanical parts, working in high precarious places, fumes or airborne particles, toxic or caustic chemicals, vibration, and the risk of electrical shock. The noise level in the work environment is usually loud. #ZR

Job Description Join the BoujieMana team, whose parent company TCWGlobal has been recognized as the Best Place to Work in San Diego for an impressive ten consecutive years! We are actively seeking dedicated individuals to join our dynamic team and contribute to the extraordinary dining experiences we offer. Why work for us? • Competitive Compensation:Enjoy a salary reflective of your expertise in the culinary arts., • Full Onsite Gym Access:Take care of your well-being with complimentary access to our state-of-the-art onsite gym., • Comprehensive Benefits Package:*, • Medical:Quality healthcare coverage to keep you and your family in good health., • Dental:Maintain a bright smile with dental coverage for preventive and restorative care., • Vision:Ensure clear vision with coverage for eye exams and eyewear., • Paid Time Off (PTO) & Holidays:Recharge and celebrate with paid time off and holiday benefits for full-time employees.* *Certain benefits apply only to full-time staff If you're passionate about culinary excellence, thrive in a dynamic environment, and are eager to contribute to a higher-end dining experience, BoujieMana wants to meet you. Apply now and become a valued member of our team! CATEGORY: Full-Time STATUS: Non-Exempt, Hourly REPORTS TO: Executive Chef LOCATION: San Diego, CA START DATE: ASAP COMPENSATION: $20-$24 per hour Follow us at more information and additional opportunities. We are looking for an experienced, professional Line Cookto join BoujieMana. You willprepare high-quality meals that meet the chefs expectations. You will be responsible for maintaining food preparation areas, stocking food products, ensuring proper storage and cooking of food, and maintaining sanitation standards. The ideal candidate will possess excellent communication and multi-tasking skills. The line cook will play an essential role in contributing to our customer satisfaction and restaurant growth. Key Responsibilities: • Promote, work, and act in a manner consistent with the mission of BoujieMana, • Inspect, clean, and maintain food preparation areas, such as equipment and work surfaces, or serving areas to ensure safe and sanitary food-handling practices, • Ensure food is stored and cooked at the correct temperature by regulating temperature of ovens, broilers, grills, fryers, roasters, and other kitchen equipment, • Guarantee freshness of food and ingredients by checking for quality, keeping track of old and new items, and rotating stock, • Know and comply with the restaurants standard portion sizes, cooking methods, quality standards, kitchen rules, policies and procedures, • Responsible for the quality of products served, • Stocks and maintains sufficient levels of food products at line stations to support a smooth service period, • Handles, stores, and rotates all food products and supplies according to restaurant policies and procedures Qualifications & Skills: • Minimum two years experience working in a professional restaurantas a line cook, • Valid Food Handlers Card, • Proficient in reading English, • Excellent understanding of various cooking methods, ingredients, equipment and procedures, • Accuracy and speed in executing assigned tasks, • In-depth knowledge of restaurant best practices and cooking methods., • Excellent communication and organizational skills, • Aptitude for multi-tasking, • Must be able to work cooperatively and efficiently in a team, • Availability to work nights, weekends, and holidays Please note: Employment is contingent upon the successful completion of a background check, which includes a drug screening. Candidates must also be authorized to work in the United States and will be verified through E-Verify. TCWGlobal is an equal opportunity employer. We do not discriminate based on age, ethnicity, gender, nationality, religious belief or sexual orientation. #LI-CB1

Job Description A-Team Solutions is seeking PRN Registered Respiratory Therapist for a contract position we have available at the VA San Diego HealthCare System. Contract is 1 year with up to 4 additional years, shifts are 10 hours, and overtime possible. Shift need is mainly nights and weekends, but all shifts could be possible. DUTIES AND RESPONSIBILITIES Respiratory Therapists (RTP or Contract RTP) assigned to Pulmonary. A Pulmonary Respiratory Therapist is a specialized healthcare practitioner who has graduated from a college or a university and passed a national board certifying examination. Respiratory therapists educate and treat people who are suffering from heart and lung problems. They often collaborate with specialists in Pulmonary, Emergency Department (ED), and Intensive Care Unit (ICU) in various aspects of clinical care of patients. Respiratory Therapists are specialists in airway management and mechanical ventilation. They may be responsible for initiating and managing life support devices for people in ICU and ED, as well as administering and monitoring patient response to inhaled drugs and medical gases. The contract RTP shall be proficient in the following tasks: 10. The RTP shall complete Bronchoscopy set-up, assistance, and pre-cleaning., 11. The RTP shall obtain sputum specimens for lab analysis., 12. The RTP shall perform Arterial puncture and blood gas analysis., 14. The RTP shall provide patient and/or family education as indicated. Requirements: Minimum Education: Completion of an accredited Respiratory Therapy (RT) Program Minimum Experience: 1 year experience, including critical care (if working in Pulmonary) Required Certification: Registered Respiratory Therapist (RRT) Credential issued by the National Board of Respiratory Care (NBRC) State Licensure: Respiratory Care Board of California BLS and ACLS (American Heart Association) A-Team Solutions is an Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. To learn more about A-Team Solutions, please visit us at or like us on Facebook! Lara 606-356-3960

Job Description How would you like to take the knowledge you already have, and use it in a new and exciting career in the aviation industry? Hallmark Aviation has earned a reputation for providing best-in-class service for some of the world's leading airlines. We focus heavily on employee happiness and employee engagement. Our team of highly skilled and engaging agents is what drives our company to be the emerging leader in above-the-wing ground handling services. We invite you to apply and be a part of our exclusive team to provide the ultimate service..... peace of mind Hallmark Aviation Services seeks to build a diverse team of highly motivated individuals to provide outstanding service to International Airlines at San Diego International Airport (SAN). We cater to a distinctive clientele. We offer full-time and part-time positions. • Excellent advancement opportunities, • Paid Training, • Dynamic Workplace, • Voluntary dental, vision, and a matching 401k plan You will also learn to perform the following functions throughout the course of your employment : • Learn the behind-the-scene workings of an international airport., • You will rotate through the check-in counter, lobby area, departure gate, customs, arrivals and other areas within the airport., • Experience how to effectively navigate through various challenges and flight activities to ensure on-time performance., • Enjoy the opportunity to professionally interact with high-profile passengers., • Eager to learn new skills, • Organized and logical thinker, • Make quick and rational decisions, • Problem Solving, • Ability to adapt quickly to unforeseen situations, • Effective communication skills and good listening skills, • Able to multi-task and carry out duties in a dynamic environment, • At least 18 years of age, high school graduate or G.E.D equivalent., • Eligible to work in the United States, • English proficient, other languages are a plus. Paid training with our highly knowledgeable and top performing training department. Equal Opportunity Employment Hallmark Aviation is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information. Job Location SAN Airport, California, United States Position Type Part-Time Salary $19/hr with Experience, $18/hr without Required Training Selected candidates will be required to attend 2 weeks of paid training Shift Various shift available. Weekends and Holidays required Schedule [i.e. M/T/W/F/Sun or TBA] TBD Language English Required. Salary/Benefits $18.00 / Hourly, $19 with Airline Experience. Voluntary Dental and Vision, 401K Company DescriptionLeading above the wing ground handling company with over 32 years in the BusinessLeading above the wing ground handling company with over 32 years in the Business

Job DescriptionBenefits: • Company parties, • Competitive salary Help our team provide compassionate care to the patients in our community offering the best care programs available in Orange, Los Angeles, Riverside and San Bernardino Counties. Become part of a team that strives to be a leader in providing professional and comprehensive care to critically, chronically and terminally ill patients in our community. Requirements of Hospice: • Current LVN license in State of CA, • One year of experience preferred, • Experience in hospice preferred Hospice LVN Duties Include: • Service a range of patients and family during transition of life, • Ensure quality and safe delivery of Hospice services, • Implements current nursing practices and provide direct hands-on care within scope of practice, • Obtains orders as needed to promote comfort and quality of life

Job Description Stone Fabricator Location: San Diego, CA Compensation: $25$35/hour depending on experience Job description: Were currently seeking a skilled Stone Fabricator with 23 years of experience working with granite, quartz, and marble. This role requires precision craftsmanship, attention to detail, and the ability to produce high-quality finished pieces that meet exact specifications. Candidates with the ability to provide their own tools will qualify for the top end of the pay range. RESPONSIBILITIES: • Fabricate granite, quartz, and marble surfaces to exact specifications., • Operate fabrication equipment including saws, polishers, routers, and CNC machines (if applicable)., • Read and interpret templates, drawings, and specifications accurately., • Perform edge profiling, polishing, cutouts, and surface finishing., • 23 years of professional stone fabrication experience with granite, quartz, and marble., • Proficiency with fabrication tools and equipment. Bronwick partners with construction and building-services companies to hire skilled tradespeople, field leaders, and operations talent. We combine industry expertise with a hands-on recruiting approach to match great people with reputable contractors for long-term success. We believe in connecting craftsmen and craftswomen to projects where their work truly stands out. #IND6

Eli Lilly and Company seeks a Principal Scientist – Automation (R3-R4) to lead the transformation of scientific workflows from manual processes to fully automated systems. Conduct basic engineering research, design, and support across the automated sample management, biology, and chemistry platforms supporting Discovery Chemistry. Integrate advanced automation technologies including machine learning, 3D printing, computer vision, and robotic manipulators. Translate scientific concepts into actionable engineering specifications. Develop and implement automation solutions and enhance laboratory performance. Train operators on the use and maintenance of robotics to ensure safe operation and rapid troubleshooting. #LI-DNI Position requires a Bachelor’s degree in Bioengineering, Chemical Engineering, Computer Science, Robotics or a related field and 2 years of academic or employment experience with applying innovative robotic solutions to drive efficiency and effectiveness in early-stage drug-discovery labs. Academic or employment experience must include a minimum of: 2 years of experience with operation, maintenance, troubleshooting, and scripting for robotics; 2 years of experience with scheduling and training fully integrated robotic systems; 2 years of experience implementing effective and reliable automation systems; and 2 years of experience with C#, Java, Python, and VB.NET. 10% domestic and international travel required. #LI-DNI Job Location: San Diego, CA. Rate of Pay: $105,000.00 - $175,000.00 per year. To apply, please visit and enter job requisition number R-91525 when prompted. Alternatively, please send your resume, cover letter, and a copy of the ad to: Matthew Tenaglio, Lilly Corporate Center, Indianapolis, IN 46285.

Position Description Job Summary: The GPR Analyst is responsible for performing nondestructive testing services using Ground Penetrating Radar (GPR) and other scanning technologies to identify embedded objects in concrete or subsurface materials. This position plays a critical role in providing accurate and timely scanning results to support safe construction and cutting operations. The GPR Analyst ensures all field work is performed in accordance with safety standards, client expectations, and company protocols. Duties and Responsibilities: • Operate GPR equipment to perform scanning services on commercial, industrial, and infrastructure job sites. • Analyze scan data in real-time to locate rebar, conduits, post-tension cables, and voids in concrete or underground. • Locating underground utilities. • Travel for training and service support. • Accurately mark scanned areas in accordance with Penhall’s Standard Marking Protocol. • Complete thorough field documentation, including field reports, sketches, and photos. • Obtain required client signatures and ensure all service tickets are completed accurately and in a timely manner. • Communicate clearly with customers to explain results, safety considerations, and next steps. • Perform pre- and post-job inspections of equipment, and report any malfunctions. • Maintain a safe and clean work environment at all times. • Attend all required branch safety meetings and training sessions. • Check in daily with dispatch or supervisor to receive and confirm job assignments. • Transport and properly secure all tools and equipment necessary for daily field operations. • Assist in training new analysts when needed. • Other duties as assigned by your manager. Position Requirements Required Skills and Abilities: • Ability to interpret GPR scan results accurately in the field • Strong problem-solving skills and situational awareness • Excellent customer service and communication skills • Detail-oriented with the ability to maintain accurate field records • Comfortable using handheld tools, ladders, and navigating active job sites • Capable of working independently and in small teams • Familiarity with smartphone apps and digital documentation • Knowledge of safety practices in construction or industrial environments Essential Core Competencies: • Technical Accuracy: Delivers precise readings and interpretations of subsurface materials • Customer Focus: Demonstrates professionalism and courtesy when interacting with clients • Accountability: Follows standard procedures and completes assignments reliably • Safety Conscious: Follows all safety procedures and proactively identifies risks • Adaptability: Adjusts to different job environments and client needs quickly • Time Management: Arrives on time and completes jobs efficiently • Teamwork: Supports peers and contributes to a collaborative work culture • Communication: Clearly shares job information with team members and clients Education and Experience: • High school diploma or equivalent required • Technical training in GPR, NDT, or construction scanning preferred • Prior experience with GPR, X-ray, utility locating or concrete scanning services a plus • OSHA 10-hour or 30-hour certification preferred (can be obtained upon hire) Physical and Additional Requirements: • Ability to lift and carry up to 50 pounds • Frequent standing, walking, bending, and kneeling on job sites • Comfortable working in construction zones, both indoors and outdoors • Ability to drive to various job locations with equipment as needed Position Instructions Penhall Company has been shaping the future of concrete services for over 65 years. As the nation’s leader in concrete cutting, coring, scanning, and demolition, and ranked 3rd in Demolition by ENR's 2023 Top Specialty Contractors, we deliver more than just expertise—we deliver results. With safety at the core of our operations and state-of-the-art technology in our hands, we ensure every project is executed with precision, efficiency, and care. Equal Opportunity Information Legal Disclaimer: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Penhall Company is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, compensation inquiries, discussions or disclosures, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. (41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a)) This job description is intended to describe the general nature and level of work being performed by employees in this position. It is not intended to be an exhaustive list of all duties, responsibilities, or qualifications required. Penhall Company reserves the right to modify, add, or remove duties and to assign other responsibilities as necessary.