Science jobs in Minnesota

Job DescriptionDescription: True North, LLC is looking for a motivated and skilled Associate Chemist to join our growing organization! Come and work for an organization that is a key partner in the OCM industry. The Associate Chemist will perform routine and non-routine analytical testing on botanicals, extracts, food, beverages, medical devices and other materials as deemed appropriate by management using validated methods (e.g., ICPMS, GC-LC, LC-MS/MS). Ensures data integrity and on-time, audit-ready results per ISO/IEC 17025 and Minnesota OCM/CTA requirements. Supports method verification/validation, instrument qualification, and continuous process improvement. Requirements: Key Duties: • Generate accurate, reliable analytical results that meet predefined method acceptance criteria and turnaround targets., • Maintain compliance with ISO 17025, ALCOA+ data integrity, and MN OCM/CTA reporting and record-retention rules., • Keep instruments in a verified, calibrated, and fit-for-use state; promptly flag/resolve issues., • Maintain chain-of-custody, sample integrity, and confidentiality throughout the testing lifecycle., • Contribute to method verification/validation, proficiency testing/ILC participation, and continuous improvement., • Perform testing (e.g. residual solvents, pesticides, heavy metals, micro, mycotoxins, moisture/water activity) following approved methods and safety procedures., • Operate, maintain, and troubleshoot analytical instruments; execute IQC/OC checks, system suitability, blanks, spikes, duplicates, and control charts; document any nonconforming work., • Process and review data in LIMS/e-records with full audit trail; apply calculations, units, rounding, and significant figures per SOP., • Calculate/confirm measurement results against acceptance criteria; initiate clarifications or retests when required., • Draft clear, complete technical records and contribute to reports/COAs; submit for technical and QA review per QMS., • Participate in method verification/validation/transfer tasks (accuracy, precision, linearity, recovery, LOD/LOQ, robustness); compile raw data and summary reports., • Perform daily/weekly instrument checks, preventative maintenance, calibrations, and verify traceability of reference standards/CRMs., • Escalate equipment/data issues; open deviations, support root-cause analysis and CAPA implementation., • Maintain good laboratory housekeeping, EHS compliance, chemical hygiene, and proper waste management., • Complete training and competence sign-offs before performing regulated tasks; keep training current. Job requirements: Education / Certification: • BS in Chemistry, Biochemistry, Chemical Engineering, or a related field (MS preferred for senior levels); in lieu of a degree, an equivalent combination of education and relevant experience will be considered., • 3+ years hands-on analytical lab experience (pharma, medical devices, food, or environmental preferred)., • Familiarity with ISO/IEC 17025, data integrity (ALCOA+), and LIMS/e-records. Technical Experience/Knowledge: • Operation of ICP-MS, LC-MS/MS, GC-MS, (mix depends on lab scope)., • Solid wet-chemistry and sample-prep skills (extractions, dilutions, filtration, digestion)., • Understanding of method performance characteristics (LOD/LOQ, MU basics, accuracy/precision)., • Proficient with Excel and basic statistics; able to interpret control charts and spike recoveries, • High attention to detail, documentation rigor, and time management., • Clear written/verbal communication; collaborative with QA, PMs, and Study Directors. Physical Requirements / Working Conditions: • Work in laboratory environment with required PPE; stand/walk for extended periods; occasional lifting up to 25 lbs., • Handle solvents/chemicals per SDS; follow chemical hygiene and waste procedures., • Standard work hours with occasional flexibility to meet TAT or instrument availability True North, LLC offers world class benefits, PTO, and retirement matching as well as a welcoming culture and team to be a part of. Salary range: Competitive within MN OCM Twin Cities market

Job DescriptionDescription: A Senior Research and Development Chemist is an experienced researcher/formulator who combines technical knowledge and innovation when formulating a variety of personal care products, cosmetics and OTC (lip balms and sunscreens) from concept to finished product based on customers’ requests. Shows the ability to look at different brands’ gaps and develop products based on those gaps or customer specification. The Senior R&D Chemist II demonstrates strong leadership and communication skills that are utilized within the organization and with external customers. Requirements: Responsibilities • Responsible for initiating project concepts, developing objectives, planning and assigning priorities, and completing multiple projects under minimal supervision., • Independently investigate/resolve research problems/scale up issues., • Ability to communicate with customers on technical aspects as well as regulatory and performance., • Utilize and follow relevant legal requirements, regulations and product development standards., • Determine and perform appropriate cost reductions (raw materials)., • Scale-up of approved formulations, to include identification of critical process variables., • Ability to troubleshoot production issues and address batch variations., • Set product specifications and write compounding procedures., • Supervise and coordinate pilot batches., • Provide paperwork for new formula and new raw materials to operations., • Provide specifications and other information to QC to receive and test new ingredients and finished goods., • Test stabilities and monitor testing statuses., • Research product formulations and properties and interactions of raw materials., • Vendor research for raw materials., • Compose and check ingredient lists, QQs and artwork, • Interpret results of laboratory findings and assess risks involved in new products and communicate findings to sales and upper management., • Remain up to date and current on trends in the retail market and trends on formulations materials, ingredients, etc., • Training and supervising lab staff (permanent and temporary)., • Notebook documentation, • Other duties as assigned. Required Skills/Abilities • Working knowledge of laboratory equipment set-up and operation, common laboratory techniques and safe chemical handling, • Advanced formulation skills and technical knowledge, • Thorough understanding of FDA regulations and cGMP’s, • Excellent written, verbal and interpersonal communication skills, • High level of initiative, innovation, critical thinking and problem-solving skills, • Ability to work cross-functionally & at all levels within the organization including senior leadership, • Ability to prioritize multiple responsibilities and manage deadlines accordingly., • Communicate effectively and professionally with clients and vendors, • Exceptional attention to detail and high level of accuracy & organization, • Ability to work as part of a team and excel independently in fast-paced environment, • Ability to adapt quickly to changing policies and procedures, • Demonstrated leadership skills, • Proficient with Microsoft Office Required Education and Experience • BS in Chemistry, Cosmetic Science, Physical Chemistry, Chemical Engineering or related sciences with 8+ years of formulating personal care products, • -OR- advanced degree in cosmetic chemistry and more than 6 years’ experience. Preferred Education and Experience • Master’s Degree in Chemistry, Cosmetic Science, Chemical Engineering or related field, • 10+ years of experience in formulation of personal care products EEO Statement • Bell International Laboratories provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws., • This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description position summary Merjent, Inc. (Merjent) is seeking an Environmental Scientist or Geologist to join our Contamination and Due Diligence Team. This role will support energy infrastructure, transportation, and redevelopment projects through the completion of Phase I Environmental Site Assessments (ESAs) and Phase II Environmental Investigations. The position requires strong technical knowledge of environmental regulatory criteria related to soil, groundwater, and soil vapor. The ideal candidate will be located in the Twin Cities, Minnesota area, though a hybrid work arrangement may be considered. This is a full time, benefits eligible position. This is primarily a field-based role, and candidates should expect to spend approximately 50 to 70 percent of their time in the field. The anticipated annual salary range for this position is $79,400 to $119,500, depending on qualifications and experience. why Merjent? Merjent is a medium-sized consulting and engineering company dedicated to creating an environment where both people and projects succeed. Merjent has staff located across the United States who may choose a remote, in-office, or hybrid work arrangement. All full-time employees begin their tenure at Merjent with 4 weeks of paid vacation regardless of seniority. In addition, employees receive 10 paid holidays and generous benefits and compensation packages. Merjent supports annual career-related training for employees to become or continue as leaders in their field of expertise. Merjent facilitates organic growth within the company and encourages employees to bring their ideas forward to grow existing and create new service lines within and beyond the currently served sectors of energy, mining, transportation, manufacturing and construction, land development industries, and government. Merjent also invests in its company culture by supporting travel for remote employees to attend in-person team meetings and all-staff events. The Merjent difference is real – it's based on a commitment to our values, which guides us in how we work with clients and each other. Our commitment to quality and professional integrity encompasses everything we do. We are proud of our reputation for delivering quality work and building long-term, trusting relationships with our clients and with regulatory agencies. responsibilities • Conduct environmental field tasks and environmental reporting tasks., • Manage and/or support Phase I Environmental Site Assessments (ESAs) and Phase II ESAs for transportation, redevelopment, and energy infrastructure projects., • Author or assist with technical reports, including Phase I ESAs, Phase II Drilling Investigation reports, Response Action Plans (RAPs), Construction Contingency Plans (CCPs), and construction monitoring reports., • Manage/conduct construction monitoring for transportation, redevelopment, and utility projects; including field screening, field reports, soil and groundwater sampling, impacted media management and documentation, and use of various field equipment (photoionization detector (PID), 4-gas meter, etc.)., • Support desktop contamination research for energy infrastructure projects, including the development of Construction Contingency Plans/Health and Safety Plans., • Work as part of a team to complete and review projects within scope, budget, and schedule. qualifications and experience • B.S. in Geology, Environmental Science, Earth Science, Environmental Chemistry, or closely related field., • 3+ years of professional environmental experience., • Applicable due diligence experience in Minnesota., • OSHA 40-hour HAZWOPER certification required., • ASTM E1527 Phase I Environmental Site Assessment Practices for Commercial Real Estate certification required., • Experience in environmental report generation and implementation of RAPs, CCPs, Phase I ESAs, and or Phase II ESAs., • Skilled in the operation and maintenance of field equipment, including PIDs and 4-gas meters., • Environmental construction monitoring, including collection of GPS data points, soil and groundwater sampling, soil classification, field screening, and creation of daily field reports., • Adept at reading and interpreting geological maps and databases., • Initiative-taker with excellent organizational/task management skills., • Highly adaptable with a strong ability to work well under pressure and timeframe constraints., • Comfortable working independently with minimal supervision, and in the context of a larger team with other project managers., • Ability to analyze, organize, and interpret data from multiple sources and translate that information into easily understandable written deliverables., • Must be willing to conduct field work as needed (50-70%), depending on project and/or program needs., • Excellent oral communication and technical writing skills. E-Verify Merjent, Inc. participates with the United States Customs and Immigration Services (USCIS) E-Verify program. We will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Candidates interested in applying should submit a completed Application for Employment (cover letter and resume) to merjent.applicantpro.com. Merjent, Inc. is an Equal Employment Opportunity/Affirmative Action Employer committed to diversity and inclusion. We are pleased to consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other legally protected factors. Disability-related accommodations during the application process are available upon request. Merjent is not accepting unsolicited assistance from search firms for this employment opportunity. Job Posted by ApplicantPro

Job Description Chemist Location: Vadnais Heights, MN Onsite What is IP Corporation: IP Corporation is a privately held, family-owned chemical manufacturing organization with more than 70 years of stability, innovation, and growth. Headquartered in Minnesota, IP Corporation supports a portfolio of operating companies that manufacture and distribute resins, gel coats, composite materials, and specialty polymer solutions used across a wide range of industrial applications. Our operating companies—Interplastic Corporation, North American Composites, HK Research, and Molding Products—work together to deliver technical expertise, high-quality products, and long-term partnerships to customers around the world. We are known for our customer-first mindset, strong technical capabilities, and a collaborative culture built on trust and continuous improvement. What is a Chemist: The Chemist is responsible for supporting product development, formulation, and testing activities within a laboratory and manufacturing environment. This role works closely with cross-functional teams including R&D, Quality, and Production to develop new products, improve existing formulations, and troubleshoot technical issues. The Chemist plays a key role in ensuring product quality, consistency, and performance while contributing to continuous improvement initiatives. What you can expect to do in a Chemist: • Conduct laboratory experiments to support product development and formulation improvements, • Perform testing and analysis of raw materials, in-process samples, and finished products, • Document and interpret experimental data, providing clear and actionable insights, • Assist in scaling formulations from lab to pilot and full production, • Troubleshoot product and process issues in both lab and plant environments, • Collaborate with Production and Quality teams to ensure product consistency and performance, • Maintain accurate records of formulations, test methods, and results, • Follow all safety, environmental, and regulatory guidelines, • Support continuous improvement efforts related to product quality and process efficiency, • Stay current on new materials, technologies, and industry trends What we are looking for in a Chemist: • Bachelor’s degree in Chemistry, Chemical Engineering, or a related field required, • 2–5+ years of experience in a laboratory, R&D, or manufacturing environment preferred, • Experience with resins, gel coats, polymers, or composite materials preferred, • Strong understanding of basic chemical principles and laboratory techniques, • Strong understanding of lab safety, • Ability to analyze data and draw meaningful conclusions, • Strong attention to detail and organizational skills, • Effective communication and teamwork abilities, • Ability to manage multiple tasks and priorities in a fast-paced environment, • Commitment to safety, quality, and continuous improvement Why IP Corporation? • Positive, challenging and supportive work environment, • Competitive benefits, including dental, vision, generous PTO, 401(k) with company match and more, • Freedom to innovate and make a difference in a vibrant, values-driven company that cares about its people IP Corporation are Equal Opportunity Employers. We encourage diversity in the workplace and are committed to creating an inclusive environment for all employees. #LI-IPCORP

Job Description What is IP Corporation: At IP Corporation, we empower you to make a difference, learn new skills, and achieve your goals. We’re committed to providing rewarding career opportunities, and we’re always looking for talented individuals to join our team. IP Corporation has been a supplier to the composites industry for over four decades. With our four subsidiaries (Interplastic, North American Composites, Molding Products and HK Research), we are uniquely positioned to meet the needs of our diverse customers. More than ever, our commitment to becoming the finest supplier and distributor of resins, gel coats and composite materials in our industry still stands. What you'll do at IP Corporation as a Sr. Chemist: This position is responsible for developing unsaturated polyester and vinyl ester resins for use in fiber reinforced plastics. This position also plays a key role in the development and improvement of polyester and vinyl ester processing and has responsibility for projects that lead to product qualification by the customer and implementation of technology transfer to manufacturing. What you’ll bring to IP Corporation: • BS/BA Degree in chemistry, polymer, or material science., • 5 + years of industrial R&D experience within a manufacturing setting., • Knowledge and practical experience in project management, experimental design, and other problem-solving methodologies., • Ability to travel 10%, • Must be able to lift 50 pounds and must be able to pass a Respirator Test. Ideal Candidate will have: • Experience with polymer synthesis, characterization of polymers and composites, and knowledge of surface science., • Experience in polymer characterization by physical and chemical methods., • Knowledge of unsaturated polyesters and vinyl esters or other similar thermoset resins and coatings., • Knowledge of fillers and additives used in the formulation of composite materials., • Demonstrated an interest and capability to direct the work of others to achieve successful project outcomes. What you'll do • Perform all required activities in a manner deemed to be safe and with minimal risk to self and co-workers., • Participate in laboratory work activities involving polymer development, quality control, materials evaluation, and matching of competitive products., • Respond properly and quickly to inquiries, either directly to the customer, to sales, or to the supervisor, regarding technical problems or matters., • Make appropriate recommendations to the Director of Research and Development or other appropriate personnel., • Maintain laboratory facilities neat and orderly to maximize employee efficiency and productivity., • Accurate and timely record-keeping, with recommendations for further laboratory efforts. Join our team and make a lasting impact on our business by empowering our teams through technology. If you’re ready to bring your expertise to a collaborative and energized environment, we’d love to hear from you! Competitive Benefit package that includes competitive salary, Medical Benefit Plan Options, Dental Plan, Vision Plan, Flexible Benefit Plan, Short Term and Long Term Disability Plans, 401K Plan that includes matching as well as profit sharing, #LI-IPCORP

Job Description Foth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 750 members across 33 locations are dedicated to solving our clients’ toughest science and engineering challenges. Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart and caring team, Foth may be the place for you. Join our team and experience the Foth difference that contributes to our impressive 92+% member retention rate! Learn more at foth.com/careers. Foth is currently seeking a team-focused, innovative, and results-oriented Geologist / Environmental Scientist who is looking for new learning experiences, opportunities for career growth, and a desire to contribute to our clients’ success. This position will be located in one of our Green Bay, WI; Madison, WI; Minneapolis, MN; Duluth, MN; Springfield, IL; Des Moines, IA or Cedar Rapids, IA locations with a hybrid option. This role does require the ability to travel to project and team locations on an occasional, as-needed basis. Primary Responsibilities: • Provide environmental review and data analysis for multiple environmental, regulatory, and permitting projects throughout the Midwest, • Coordinate, plan, and execute environmental and technical fieldwork, including independent field assignments, documentation, and reporting, • Provide project review, analysis, and summary of regulations and procedures governing environmental review, permitting, and data analysis, • Interact with project stakeholders and key regulatory agency personnel to assist project proponents in navigating environmental review and permitting, • Draft and contribute to environmental review and technical documents—such as Environmental Impact Statements, Environmental Assessments, Biological Assessments, field observation reports, and technical memoranda—including data research, analysis, and synthesis aligned with stakeholder goals and regulatory standards, • Coordinate project tasks and field activities using strong organizational skills, ensuring effective collaboration among project team members, • Present technical concepts, analyses, and findings clearly and concisely to internal teams, clients, and stakeholdersRequired Qualifications:, • Bachelor's degree in Environmental Science, Geology, Hydrogeology, or related field, • Experience with field sampling methods and related data management and reporting, • Experience working with environmental data sources, metrics and standards, • Experience managing multiple project tasks simultaneouslyPreferred Qualifications:, • 2+ years of experience in a similar environmental scientist role, • Demonstrable experience in preparation of environmental permitting or environmental review documents in the upper Midwest, • Experience with Federal environmental review processes including NEPA and state environmental review processes such as MEPA, • Experience with preparing federal and state permit applications for natural resource projects, • Private-sector or government experience, especially in the environmental review or permitting fields, • Basic GIS experienceThe base compensation listed for this job posting reflects a general range for the posted position. Base compensation will vary based on factors such as: years of experience, location, level of responsibility and licenses/certifications. In addition to base compensation, Foth members may be eligible to receive bonuses through our Earned Performance Incentive program. All employees are eligible for On-the-Spot bonuses. Exempt members are also eligible for either quarterly and/or annual bonuses. Eligible full-time and part-time members will be offered medical, dental, vision insurance, employee assistance program, disability, retirement, holiday pay, paid time off, and several other voluntary benefits. Please reach out to the recruiting team to discuss any specific benefits or compensation questions. Note: In some situations, we may consider an alternative position based on your skill set and experience. This may result in a different compensation range.All Foth Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, or any other characteristic protected by law. Qualified women, minorities, persons with disabilities, and veterans are encouraged to apply. All locations are tobacco-free. Subject to applicable state law, all applicants who have received a written offer of employment and a copy of Foth’s Drug and Alcohol-Free Workplace Program Policy, will be required to undergo testing for commonly abused controlled substances. Applicants must complete the required drug testing within two business days of offer acceptance. Foth will pay for all drug testing, which will be conducted by a licensed independent medical laboratory that follows testing requirements in accordance with applicable state law. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Notice to Third Party Recruiters/Agencies: Foth does not accept unsolicited resumes from third party recruiting firms. Absent a signed recruiting agreement coordinated through Foth, Foth reserves the right to pursue and hire candidates without financial obligation to third party recruiters or agencies. Artificial Intelligence: Foth uses artificial intelligence and other technology-assisted tools in connection with parts of our recruiting and hiring process, including to assist with reviewing application materials, identifying potentially qualified candidates, sourcing candidates, and supporting interview preparation. These tools are used to support, but do not replace, human decision-making, and all employment decisions are made by qualified human reviewers. Where required by law, we will provide additional information regarding the use of these tools, and applicants may contact us with questions or request reasonable accommodation regarding their use. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Senior Chemist, Research & Processing / Senior Formulation Chemist Join my client's R&D team as the technical bridge between formulation, process engineering, and manufacturing. This is a high-impact role where your expertise in scale-up and innovation will shape the future of personal care products, from bench concept to production reality. You'll be the go-to expert solving the challenges that others can't crack. Why You Should Apply • Own the technical transfer of formulas from bench to full-scale production, • Drive meaningful innovation through focused research on novel processing methods and mineral actives, • Serve as the subject matter expert on ingredient behavior, dispersion, and scale-up, • Collaborate cross-functionally with QA, Regulatory, Marketing, and Operations leadership What You'll Be Doing • Leading tech transfers and scale-up trials for customer and internal formulas, • Troubleshooting emulsification, stability, and mixing challenges alongside compounding teams, • Researching dispersants, emulsifiers, and raw material innovations, • Partnering with suppliers to stay ahead of emerging ingredient technologies, • Developing internal best-practice guidelines for broader R&D adoption About You • Be able to do the job as described., • Deep expertise in emulsion chemistry and pigment dispersion, • Hands-on knowledge of zinc oxide, titanium dioxide, and mineral UV filters, • Experience formulating SPF and OTC products under global regulatory frameworks, • Degree in Cosmetic Science, Chemistry, or Chemical Engineering How To Apply We'd love to see your resume, but we don't need it to have a conversation. Send us an email to me sappel @ jacobsmgt.com and tell me why you're interested. Or, if you do have a resume ready, apply here.

Job Description As a ProMed employee, you will contribute to the manufacture of products that have a significant impact on people’s lives. Through honesty, integrity, and collaboration, we strive to be the very best as we hire the very best. ProMed was founded in 1989 addressing an industry need for cleanroom manufacturing of silicone components, specifically those having a medical application. We treat every component and finished device as though it will be used by a beloved family member or friend. We are dedicated to our customers and to our employees while helping to improve the health and well-being of people around the world. Working as one to help many. POSITION SUMMARY The Chemist I performs a wide variety of analytical tasks for formulation development and product release. Under supervision, these tasks include testing of incoming materials, commercial products, research and development pharmaceutical dosage forms, and medical device combination products to support formulation and product release activities. This position operates under minimal guidance from management or senior staff. The Chemist ensures ProMed’s brand, philosophy, systems, policies, and procedures are properly implemented and observed. ESSENTIAL DUTIES & RESPONSIBILITIES Position duties and responsibilities include, but are not limited to the following: • Conducts routine and non-routine analyses of experimental and commercial products., • Under supervision, conducts experiments following established test methods, test plans, or protocols., • Records experiments in a laboratory notebook., • Reports experimental data to internal and external customers., • Participates in project team meetings with internal and external customers., • Complies to the ProMed Quality Management System, as well as customer and regulatory requirements., • Participates in project planning., • Participates in root cause investigations., • Performs peer review of analytical data., • The employee is expected to develop acceptable work habits, skills, knowledge, and contributions consistent with the Associate Analytical Scientist position level., • This job also requires performing other duties as assigned.QUALIFICATION, EDUCATION & EXPERIENCE To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required: • Bachelor’s Degree in chemistry or related field, plus 0 to 3 years’ experience in analytical chemistry or related field. Preferred:, • Familiarity with HPLC and other common laboratory instrumentation, • Knowledge of current Good Manufacturing Practices and other regulatory requirements, • Demonstrated interest in analytical chemistry, pharmaceuticals, and medical devices, • Experience with MS Office, • Problem-solving and critical thinking skills, • Strong interpersonal, written, and verbal communication skills, • Clearly conveys ideas and receives information effectively, • Self-starter with a proven ability to successfully work with minimal supervision, • Professional, courteous, and friendly personality, • Working knowledge of English (verbal and written) WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the principal roles and responsibilities of this job. • Exposure to heated/air conditioned, ventilated facilities with florescent lighting;, • Exposure to building where a variety of chemical substances are used for cleaning, and/or operation of equipment;, • The noise level in the work environment is usually minor;, • Duties are performed indoors;, • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL, SENSORY, COGNITIVE & NEUROLOGICAL DEMANDS While performing the duties of this job: • The employee may be required to stoop, bend, squat, kneel, reach, stand, walk, lift, pull, push, grasp, talk, hear, see and use repetitive motions;, • Specific vision abilities required include close vision such as to read handwritten or typed material and the ability to adjust focus;, • The position requires the individual to meet multiple demands from several people and interact with internal and external people;, • Employee moves about the building and be able to maneuver in tight spaces between desks, etc.;, • Employee may have duties involving walking on even or uneven surfaces;, • Employee occasionally to frequently use a whiteboard, which can require grasping whiteboard pens, reaching at, below, or above shoulder height and may require trunk or neck rotation to look back;, • Employee may use computers, overhead projectors, TV, and other work-related equipment, which may require an approximately 25+ pound force to push or pull equipment;, • It is necessary to grasp and manipulate pens, markers, scissors, staplers, etc. occasionally to frequently., • Employee must see and hear on a continuous basis as well as speak frequently;, • Position varies from standing, sitting, walking, etc. On some occasions it may be necessary to move quickly, run, etc. over smooth or uneven surfaces. ProMed offers a generous benefits package including: • 401k with company match, • Profit Sharing program, • Medical Insurance, • Health Savings Account/Flexible Spending Account, • Dental Insurance, • Vision Insurance, • Life Insurance, • Paid FMLA, and Long-Term Disability Insurance, • Hospital Indemnity, Critical Illness, Accident, and Identity Theft Protection, • Pet Insurance ProMed does not discriminate in employment opportunities or practices on the basis of race, color, creed, religion, national origin, ancestry, age, sex, marital status, order of protection, disability, military status, sexual orientation, gender identity, pregnancy, public assistance, family status, unfavorable discharge from military service, genetic information or other segmenting factor protected by law, or local human rights commission activity.

Job Description Foth is a 100% member-owned science and engineering consulting firm headquartered in Wisconsin, with over 85 years of success. Our 750 members across 33 locations are dedicated to solving our clients’ toughest science and engineering challenges. Consistently ranked by Engineering News Record in the top 150 firms, we offer a values-based, collaborative, and flexible work environment with professional growth opportunities. If you thrive working alongside a smart and caring team, Foth may be the place for you. Join our team and experience the Foth difference that contributes to our impressive 92+% member retention rate! Learn more at foth.com/careers. Foth is currently seeking a team-focused, innovative, and results-oriented Lead Hydrogeologist who is looking for new learning experiences, opportunities for career growth, and a desire to contribute to our clients’ success. This position will be working out of our Green Bay, WI; Minneapolis, MN; Duluth, MN; or Madison, WI locations with the opportunity for a hybrid schedule. Primary Responsibilities: • Lead the technical execution of hydrogeological aspects of projects, • Work with project managers to estimate project costs and consult on technical approach, • Develop technical approaches for regional hydrologic characterization of groundwater systems in environments comprised of unconsolidated deposits and fractured crystalline rock, • Provide project and technical leadership on complex, multi-disciplined projects, to include managing a portion of a project’s budget, scope, schedule, regulatory and contractual commitments, • Develop and implement technical approaches for numerical analysis of groundwater and surface water systems in support of permitting, industrial development and site remediation, • Teach, mentor and develop other members, as well as serve as a resource in the area of hydrogeologyRequired Qualifications:, • Bachelor’s degree in Hydrogeology, Engineering, or a closely related field, • Minimum 10 years of experience conducting hydrogeological investigations, including at least 5 years of hands-on field experience, • Demonstrated experience coordinating and executing field characterization programs, including aquifer testing, hydrophysical profiling, groundwater modeling, and numerical analysis, • Proven ability to provide project leadership on complex, multi-disciplinary projects, including management of budgets, schedules, regulatory and contractual commitments, and delivery of technical consultation, • Experience integrating hydrogeologic investigations and numerical analyses with feasibility studies and alternatives analyses, • Previous experience providing expert witness testimony at environmental hearings Preferred Qualifications:, • Master’s Degree in Hydrogeology or Engineering, or a closely related field, • Experience working in deep bedrock environments, • Previous experience working with a technical consulting firmThe base compensation listed for this job posting reflects a general range for the posted position. Base compensation will vary based on factors such as: years of experience, location, level of responsibility and licenses/certifications. In addition to base compensation, Foth members may be eligible to receive bonuses through our Earned Performance Incentive program. All employees are eligible for On-the-Spot bonuses. Exempt members are also eligible for either quarterly and/or annual bonuses. Eligible full-time and part-time members will be offered medical, dental, vision insurance, employee assistance program, disability, retirement, holiday pay, paid time off, and several other voluntary benefits. Please reach out to the recruiting team to discuss any specific benefits or compensation questions. Note: In some situations, we may consider an alternative position based on your skill set and experience. This may result in a different compensation range. All Foth Companies are equal opportunity employers, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, or any other characteristic protected by law. Qualified women, minorities, persons with disabilities, and veterans are encouraged to apply. All locations are tobacco-free. Subject to applicable state law, all applicants who have received a written offer of employment and a copy of Foth’s Drug and Alcohol-Free Workplace Program Policy, will be required to undergo testing for commonly abused controlled substances. Applicants must complete the required drug testing within two business days of offer acceptance. Foth will pay for all drug testing, which will be conducted by a licensed independent medical laboratory that follows testing requirements in accordance with applicable state law. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Notice to Third Party Recruiters/Agencies: Foth does not accept unsolicited resumes from third party recruiting firms. Absent a signed recruiting agreement coordinated through Foth, Foth reserves the right to pursue and hire candidates without financial obligation to third party recruiters or agencies. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The Science Team at Russell Tobin & Associates is currently supporting a client in the Material Science industry and is having the Quality Control Technician in Cottage Grove, MN Key Responsibilities: • Perform and report analytical testing results for quality control purposes on manufactured products and raw materials., • Conduct testing on incoming raw materials, in-process samples, and finished products., • Calibrate and maintain analytical instrumentation to ensure reliable performance., • Support the evaluation and implementation of new analytical methods developed by R&D teams., • Conduct measurement system analyses and other quality assurance activities., • Independently prioritize incoming samples and laboratory workload to meet operational requirements., • Collaborate with manufacturing engineers, chemists, and laboratory personnel to communicate testing status, results, and any challenges encountered., • Perform basic troubleshooting of laboratory equipment and instrumentation and escalate issues when appropriate. Required Qualifications • High school diploma or GED required., • Experience using laboratory data management, reporting, or analysis systems., • Experience with: Titrations, Gas Chromatography (GC), Liquid Chromatography (LC/HPLC), • Associated sample preparation techniques, • Proficiency with Microsoft 365 applications, including Excel, Word, Outlook, and Teams. Additional Details: Pay range: $18 - $21/hour on W2 as per your experience Contract Length: 3 Months with the possibility of extension Must be authorized to work in the United States. Pride Health offers eligible employees’ comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. APPLY NOW!

By living according to a common set of values, we create a culture that unifies, embraces the uniqueness we all bring to the company, and positions Integer for long-term success. At Integer, our values are embedded in everything we do. Customer We focus on our customers' success Innovation We create better solutions Collaboration We create success together Inclusion We always interact with others respectfully Candor We are open and honest with one another Integrity We do the right things and do things right Conducts coating chemistry work related to the manufacture, scale-up, control, and continuous improvement of hydrophilic coatings for catheters and guidewires. Ensures consistent execution of validated coating processes to meet safety, quality, and delivery targets in a production environment. Investigates and resolves polymer- and coating-related technical issues that affect product performance and yield while partnering closely with Operations, Quality, and Engineering teams to support commercial production Research & Development - Production Support \n • Execute established coating formulations and processes in adherence to validated parameters and specifications\n, • Provide hands-on support for coating, mixing, curing, and surface preparation processes\n, • Perform routine analytical and in-process testing to ensure materials and finished goods meet specifications\n, • Monitor product performance through data trending and process verification\n, • Investigate deviations, nonconformances, and yield issues using root cause analysis tools\n\n Design for Manufacturability & Tech Transfer \n • Partner with Operations, Engineering, and Quality to ensure processes are scalable, safe, and capable\n, • Optimize polymer chemistry operations (mixing, dispersion, curing, coating, drying, cleaning) for throughput, yield, and robustness\n, • Author and maintain SOPs, specifications, batch records, BOMs, routers, and work instructions\n, • Support validation activities including IQ/OQ/PQ and MSA/GR&R to sustain validated production processes\n\n Coating Production & Supplier Support \n • Execute complex batch records and troubleshoot real-time production issues (e.g., low yield, OOS/OOT results)\n, • Define raw material specifications and collaborate with Supplier Quality on material consistency and change control\n, • Evaluate and disposition nonconforming materials and implement CAPA and risk mitigations\n\n Quality, Compliance & Safety \n • Ensure adherence to QMS and regulatory standards (FDA 21 CFR Part 820, ISO 13485)\n, • Apply GLP/GMP, ALCOA+ data integrity, and safe chemical handling practices\n, • Support complaint investigations, failure analysis, and trend reduction activities\n\n Innovation & Continuous Improvement \n • Drive process improvements focused on yield, cost, cycle time, and capability (Cp/Cpk)\n, • Participate in cross-functional initiatives to enhance manufacturability and efficiency\n\n Manufacturing Excellence & Market-Focused Innovation Support and contribute to Integer Production System initiatives: \n • Strategy alignment through Hoshin planning and SIOP\n, • Sustained change via production performance monitoring\n, • Standardization through manufacturing work instructions and training\n, • Engagement in safety and problem-solving systems\n, • Optimization of systems, process flow, and equipment reliability\n\n Education & Experience: \n • \nMinimum Education: Bachelor's degree in Chemistry, Polymer Science, Materials Science, or related field\n, • \nMinimum Experience: 0-3 years of experience in a manufacturing, process chemistry, or coatings environment\n\n Knowledge & Skills: Technical Expertise \n • Chemical process execution (mixing, coating, curing, cleaning, scale-up)\n, • Analytical techniques: HPLC/UPLC, FTIR, UV-Vis, rheology, friction testing\n, • Process monitoring and control systems (SPC, MES, batch execution)\n, • Validation methodologies (IQ/OQ/PQ), MSA/Gage R&R\n, • Quality & regulatory standards (ISO 13485, FDA, CAPA)\n\n Special Skills \n • Strong troubleshooting ability in real-time production environments\n, • Ability to work on the manufacturing floor with cross-functional teams\n, • Data analysis and problem-solving skills\n\n Specialized Knowledge \n • Polymer chemistry and hydrophilic coating systems\n, • Manufacturing scale-up and process robustness principles\n, • Continuous improvement methodologies (Lean, Six Sigma preferred)\n\n Coatings Chemist I Salary: $61,875- $90,750 Our total rewards program is designed to attract, retain, and motivate associates to contribute to Integer's success. Our compensation program includes base salary and a cash-based incentive program supporting our pay-for-performance philosophy. We provide a comprehensive benefits package with immediate eligibility including medical, dental, vision, disability, life insurance, and adoption benefits. Parental leave is available after one year. Optional employee-paid programs include supplemental life insurance, critical illness, hospital indemnity and accident insurance. Employees are immediately eligible to participate in the 401(k) plan with company matching contributions. We provide 80 hours (10 days) of company designated holidays per year plus an annual allotment of paid time off. U.S. Applicants: Equal Opportunity Employer. In addition, veterans and individuals with disabilities are encouraged to apply.

The Chemist II within the Military and Transportation team of General Industrial Division that is responsible for a variety of exciting activities related to developing new technologies and new platforms in our high performance coatings. Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's staff, employees, and business relationships. • Working closely with a mentor chemist developing, reformulating, maintaining and enhancing products through planning, executing and analysis of experiments with clear and accurate results., • Display a basic working knowledge of the use of chemicals, raw materials, substrate preparation and use instruments commonly found in a lab environment, • Responsible for inputting data, data analysis and technical documentation daily into lab books or a database., • Functioning under substantial supervision, but may lead individual or group projects. Product development and/or enhanced with consistent in performance and quality., • Utilizing advanced technologies to develop products that demonstrate improvements and difference that consumer can perceive and will desire., • Performing basic paint making processes, meets manufactures specifications, • Performing basic coating formulations, applications and physical/performance testing methods, • Providing timely and accurate conclusions based upon data to help resolve field complaints, raw material issues, manufacturing problems, and support existing and new product development, • Experience with solvent-borne and water-borne acrylic, alkyd, epoxy and urethane chemistries, • Excellent organizational and communication skills, • Application and troubleshooting of general industrial coatings BASIC QUALIFICATIONS • Must meet ITAR U.S. Person requirements - Sherwin-Williams maintains International Traffic in Arms Regulations (ITAR) compliant operations in United States based facilities. This position is subject to ITAR which requires U.S. Person status. ITAR defines U.S. Person as U.S. Citizens, lawful permanent residents, or foreign nationals granted refugee or asylee status., • Bachelor's degree in a Science, Technology, Engineering or Math field., • Must be at least 18 years of age., • Must have at least 3 years of experience with reactive chemistry- specifically urethane and epoxy coatings. PREFERRED QUALIFICATIONS • Experience working with DOE, Minitab, Product Vision, Microsoft Office Travel Requirements: Up to 20% Domestic and International This position is not eligible for sponsorship for work authorization now or in the future, including conversion to H-1B visa.

The Sr. Chemist position on our Transportation and Military Platform within the General Industrial division is responsible for a variety of exciting activities related to developing new technologies and new platforms in our high performance coatings. Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's staff, employees, and business relationships. • Working closely with a mentor chemist developing, reformulating, maintaining and enhancing products through planning, executing and analysis of experiments with clear and accurate results., • Display a working knowledge of the use of chemicals, raw materials, substrate preparation and use instruments commonly found in a lab environment, • Responsible for inputting data, data analysis and technical documentation daily into lab books or a database., • Will lead individual and group projects. Product development and/or enhanced with consistent in performance and quality., • Utilizing advanced technologies to develop products that demonstrate improvements and difference that consumer can perceive and will desire., • Performing paint making processes, meets manufactures specifications, • Performing coating formulations, applications and physical/performance testing methods, • Providing timely and accurate conclusions based upon data to help resolve field complaints, raw material issues, manufacturing problems, and support existing and new product development, • Experience with solvent-borne and water-borne acrylic, alkyd, epoxy and urethane chemistries, • Excellent organizational and communication skills, • Application and troubleshooting of general industrial coatings BASIC QUALIFICATIONS • Must meet ITAR U.S. Person requirements - Sherwin-Williams maintains International Traffic in Arms Regulations (ITAR) compliant operations in United States based facilities. This position is subject to ITAR which requires U.S. Person status. ITAR defines U.S. Person as U.S. Citizens, lawful permanent residents, or foreign nationals granted refugee or asylee status., • Bachelor's degree in a Science, Technology, Engineering or Math field., • Must be at least 18 years of age., • Must have at least 5 years of formulation experience industrial coatings. PREFERRED QUALIFICATIONS • Experience working with DOE, Minitab, Product Vision, Microsoft Office Travel Requirements: Up to 30% Domestic and International This position is not eligible for sponsorship for work authorization now or in the future, including conversion to H-1B visa.

The Development and Quality Chemist is an experienced researcher/formulator of household/automotive chemicals. Shows the ability to look at different brands' gaps and develop products based on those gaps or through customer driven sales data. Responsible for overall lab operations and developing testing methodologies associated with proper chemistry or chemical composition in each finished good. This includes product quality to workmanship standards and specification, the performance of day-to-day monitoring, testing and initial start-up authorization; all by utilizing instrumental analysis to ensure reliability and conformance to specifications. DUTIES & RESPONSIBILITIES: • Quality/Lab:, • Perform chemical tests, document results, and review data for raw materials, parts, or finished goods to measure product performance under a variety of conditions., • Write and implement control tools such as check list for production line, warehouse conditions, regulatory requirements, subcontractor requirements, 3rd party audits, raw material deliveries, and maintain quality control manual., • Performs routine inspection, testing and calibration procedures to determine conformance of instruments used to test raw materials, formula BOM, packaging and finished goods to their specifications and maintains historical records., • Set-up and operate test equipment as required, to accurately test and measure received, in process, and final product goods., • Prepare record of inspection documentation and test reports as required., • Develops & Shares key KPI results with management team., • Training, mentoring and supervising lab staff (permanent and temporary), • Routes nonconforming parts, subassemblies, and assemblies to proper authority for disposition and corrective action., • Responsible for the Hazardous Waste Management program. Follow all MPCA rules and regulations., • Reviews and investigates all customer concerns, complaints and returns to ensure all corrective actions are implemented or disposition of product is addressed in a timely fashion., • Provide technical support to customer service/support as well as production., • Maintain proper chemical safety procedures on site, including SDS's, protective safety equipment (showers, eyewash, etc.) and maintain knowledge of relevant regulatory requirements., • Prepare and archive reports when deviation from policy is necessary. Also has the ability to conduct root cause analysis, suggest corrective and preventative actions., • Author and train both production and quality employees on SOPs., • Development/ABW Chemist:, • Responsible for initiating project concepts, developing objectives, planning and assigning priorities, and completing multiple projects under minimal supervision., • Independently investigate/resolve research problems/scale up issues., • Communicate with customers on technical aspects as well as regulatory and performance., • Utilize and follow relevant legal requirements, regulations and product development standards., • Scale-up of approved formulations, to include identification of critical process variables., • Troubleshoot production issues and address batch variations., • Set product specifications and write compounding procedures., • Supervise and coordinate first time batches., • Provide specifications and other information to QC to receive and test new ingredients and finished goods., • Test stabilities and monitor testing statuses., • Provide paperwork for new formulas and new raw materials to operations., • Research product formulations and properties and interactions of raw materials., • Qualify new and alternative sources of raw materials., • Interpret results of laboratory findings and assess risks involved in new products and communicate findings to sales and upper management., • Periodically confirm and investigate product formulation alterations to meet a shifting raw material market., • Remain up to date and current on trends in the retail market and trends on formulations materials, ingredients, etc. Required Skills/Abilities • Advanced formulation skills and technical knowledge, • Thorough understanding of federal and state regulations, • Drives creative research and strategic recommendations for product development, • Proven ability to manage multiple projects, in a fast-paced environment under short deadlines, tolerance for business ambiguity; the ability to thrive under quickly changing situations; adaptable, with ability to meet short turnaround times., • Methodological mindset to test new ideas and work towards valid results., • Proven ability to manage external suppliers and ensure top value and performance for the organization, • Self-motivated and able to operate independently, as well as work effectively with others, • Excellent written, verbal and interpersonal communication skills, • High level of initiative, innovation, critical thinking and problem-solving skills, • Ability to work cross-functionally & at all levels within the organization including senior leadership, • Exceptional attention to detail and high level of accuracy & organization, • Ability to work as part of a team and excel independently in fast-paced environment, • Ability to adapt quickly to changing policies and procedures, • Demonstrated leadership skills, • Proficient with Microsoft Office EDUCATION AND EXPERIENCE REQUIREMENTS: • BS in Chemistry, Physical Chemistry, Chemical Engineering or related sciences with 4+ years of formulating household/automotive chemical products. WORK ENVIRONMENT: This role is situated in a dynamic plant environment. In the course of performing job responsibilities, the employee actively engages in standing, walking, stooping, kneeling, crouching, and crawling. Additionally, there is a regular need for sitting, climbing, or maintaining balance. Occasional lifting or movement of items weighing up to 50 pounds is also part of the job requirements. We are an EEOC/AA Employer. An industry leader, FMP offers well-balanced compensation and benefits programs, which may include medical, dental, vision, life, 401K, profit sharing, paid holidays/vacation/sick time, STD/LTD, + much more. Salary is based on experience and job performance. EducationBachelors of Chemistry (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

By living according to a common set of values, we create a culture that unifies, embraces the uniqueness we all bring to the company, and positions Integer for long-term success. At Integer, our values are embedded in everything we do. Customer We focus on our customers' success Innovation We create better solutions Collaboration We create success together Inclusion We always interact with others respectfully Candor We are open and honest with one another Integrity We do the right things and do things right Conducts coating chemistry work related to the manufacture, scale-up, control, and continuous improvement of hydrophilic coatings for catheters and guidewires. Ensures consistent execution of validated coating processes to meet safety, quality, and delivery targets in a production environment. Investigates and resolves polymer- and coating-related technical issues that affect product performance and yield while partnering closely with Operations, Quality, and Engineering teams to support commercial production Research & Development - Production Support • Execute established coating formulations and processes in adherence to validated parameters and specifications, • Provide hands-on support for coating, mixing, curing, and surface preparation processes, • Perform routine analytical and in-process testing to ensure materials and finished goods meet specifications, • Monitor product performance through data trending and process verification, • Investigate deviations, nonconformances, and yield issues using root cause analysis tools Design for Manufacturability & Tech Transfer • Partner with Operations, Engineering, and Quality to ensure processes are scalable, safe, and capable, • Optimize polymer chemistry operations (mixing, dispersion, curing, coating, drying, cleaning) for throughput, yield, and robustness, • Author and maintain SOPs, specifications, batch records, BOMs, routers, and work instructions, • Support validation activities including IQ/OQ/PQ and MSA/GR&R to sustain validated production processes Coating Production & Supplier Support • Execute complex batch records and troubleshoot real-time production issues (e.g., low yield, OOS/OOT results), • Define raw material specifications and collaborate with Supplier Quality on material consistency and change control, • Evaluate and disposition nonconforming materials and implement CAPA and risk mitigations Quality, Compliance & Safety • Ensure adherence to QMS and regulatory standards (FDA 21 CFR Part 820, ISO 13485), • Apply GLP/GMP, ALCOA+ data integrity, and safe chemical handling practices, • Support complaint investigations, failure analysis, and trend reduction activities Innovation & Continuous Improvement • Drive process improvements focused on yield, cost, cycle time, and capability (Cp/Cpk), • Participate in cross-functional initiatives to enhance manufacturability and efficiency Manufacturing Excellence & Market-Focused Innovation Support and contribute to Integer Production System initiatives: • Strategy alignment through Hoshin planning and SIOP, • Sustained change via production performance monitoring, • Standardization through manufacturing work instructions and training, • Engagement in safety and problem-solving systems, • Optimization of systems, process flow, and equipment reliability Education & Experience: • Minimum Education: Bachelor's degree in Chemistry, Polymer Science, Materials Science, or related field, • Minimum Experience: 0-3 years of experience in a manufacturing, process chemistry, or coatings environment Knowledge & Skills: Technical Expertise • Chemical process execution (mixing, coating, curing, cleaning, scale-up), • Analytical techniques: HPLC/UPLC, FTIR, UV-Vis, rheology, friction testing, • Process monitoring and control systems (SPC, MES, batch execution), • Validation methodologies (IQ/OQ/PQ), MSA/Gage R&R, • Quality & regulatory standards (ISO 13485, FDA, CAPA) Special Skills • Strong troubleshooting ability in real-time production environments, • Ability to work on the manufacturing floor with cross-functional teams, • Data analysis and problem-solving skills Specialized Knowledge • Polymer chemistry and hydrophilic coating systems, • Manufacturing scale-up and process robustness principles, • Continuous improvement methodologies (Lean, Six Sigma preferred) Coatings Chemist I Salary: $61,875- $90,750 Our total rewards program is designed to attract, retain, and motivate associates to contribute to Integer's success. Our compensation program includes base salary and a cash-based incentive program supporting our pay-for-performance philosophy. We provide a comprehensive benefits package with immediate eligibility including medical, dental, vision, disability, life insurance, and adoption benefits. Parental leave is available after one year. Optional employee-paid programs include supplemental life insurance, critical illness, hospital indemnity and accident insurance. Employees are immediately eligible to participate in the 401(k) plan with company matching contributions. We provide 80 hours (10 days) of company designated holidays per year plus an annual allotment of paid time off. U.S. Applicants: Equal Opportunity Employer. In addition, veterans and individuals with disabilities are encouraged to apply.

Are you passionate about making a difference in the world? Look no further! The Borgen Project is an international organization that works at the political level to improve living conditions for people impacted by war, famine and poverty.With 20 years of experience in the advocacy space, The Borgen

Braun Intertec is seeking an Experienced Building Science Technician to join our Bloomington, MN location.

North American Science Associates, Inc.

A leading pharmaceutical company in Rochester, MN is seeking a Chemist II to perform quality control laboratory analyses on raw and finished products.Responsibilities include conducting testing, participating in investigations, and maintaining compliance with safety regulations.The ideal candidate h