Software engineer jobs in Scottsdale, ArizonaCreate job alerts

Central Plant Operator and Central Plant Operator Senior Arizona State University Campus: Tempe JR115010 End Date: April 9, 2026 Apply before 11:59 PM Arizona time the day before the posted End Date. Minimum Qualifications: Associate's degree and one (1) year of experience appropriate to the area of assignment/field; OR, Any equivalent combination of experience and/or training from which comparable knowledge, skills and abilities have been achieved. Job Profile Summary: Provides routine facilities operations support for a department based on established policies and procedures. Job Description: Facilities Management, Central Plant, seeks Central Plant Operators and Central Plant Operator Seniors to assist in the monitoring, operating, repairing and performing preventative maintenance on boilers and/or chillers and related equipment. Central Plant is a 24/7 operating facility. Positions available at Central Plant on the ASU Tempe & West Valley campuses, however may require working from other campuses depending on operational need. Essential Duties: Central Plant Operator Monitor various gauges, gas and draft meters, pressure and temperature indicators to verify operating conditions of automatically fired boilers, chillers, compressors, motors, turbines and/or other related equipment. Prepare logs, charts and reports of operating conditions. Clean, paint, lubricate, service and perform minor maintenance adjustments necessary to ensure safe and economical operation of all central plant equipment and submit reports to ensure efficient utilization of equipment and adherence to the preventive maintenance program. Make chemical analysis of water samples and adjusts amounts of chemicals being used to protect equipment properly. Operate data center and computer to question or verify specified operating conditions at various university facilities as required; initiate corrective action in trouble or emergency situations by notifying proper department or dispatching appropriate personnel to site. Perform maintenance in disassembly, assembly, repair and cleaning of boilers, chillers or other related plant equipment as required. Apply safety standards at all times and maintain good housekeeping practices to provide safe working conditions. Report problems affecting plant safety to appropriate personnel. Use ability to clearly communicate to perform essential functions. Central Plant Operator Senior Monitor, operate, repair and perform preventative maintenance on boiler, chillers, plant equipment and associated equipment. Utilize computer interface to operate the Distributed Control System (DCS)/PLC. Collect water samples and perform test on plant loops. Read plant gauges and maintain logs. Utilize hand and power tools, wrenches, ratchets and sockets, shovel, squeegee, broom, vacuum, pallet jack, manual hoist, cleaning/paint tools, voltage/refrigerant/calibration meters, gantry, tap, dies, drills, grinders, pressure washer, tube cleaning machine, saws, mechanical hoist and impact wrench. Evaluate systems for effective energy usage and conservation; make, adjust, repair, replace as needed. Use software and hardware in computers and microprocessors for system troubleshooting, adjustment, and repair. Modify existing systems and programs, troubleshooting, and maintenance for the objective of creating an optimum system of operation. Perform database uploads and downloads to provide DDC controllers with current programs. Operate and monitor control system equipment. Detect source and nature of system problems. Make adjustments to change operating parameters of the system due to emergencies, malfunctions, and change requirements or to optimize operations. Perform emergency corrections to neutralize alarm conditions and restore proper operation. Verify correct system and control sequence operations. May perform scheduled and unscheduled remote start and stop of equipment. Review, modify, and implement programming changes to plant control system to ensure efficient and effective system operations and conformance with standards and guidelines. Monitor and adjust control loops for optimum performance. Calibrate, repair, and replace plant control system sensing devices to specifications. Study plans, drawings, specifications, and work order requirements. Troubleshoot power supplies, controllers, transducers, transmitters, flow meters, sensors, actuators, and take corrective actions. Use ability to clearly communicate to perform essential functions. DAYS AND SCHEDULE: Multiple shifts available at Tempe and West Valley campuses. WAGE RANGE Central Plant Operator: $28.00 - $31.00 per hour based on experience and education. ASU offers a comprehensive benefits package with the State of Arizona. Central Plant Operator Senior: $31.01 - $34.00 per hour based on experience and education. ASU offers a comprehensive benefits package with the State of Arizona. Desired Qualifications: Central Plant Operator Three years experience in the operation of boiler and/or chiller equipment and related systems; OR, Any equivalent combination of experience and/or education from which comparable knowledge, skills and abilities have been achieved. Some positions in this classification may require Chloroflourocarbons Certification upon employment. Some positions in this classification may require a current Arizona driver's license upon employment. Experience in: using hand tools of the trade. monitoring, operating and maintaining boilers and/or chillers. operating and maintaining large (>1000 ton) centrifugal chillers. using a DCS workstations or equivalent. using Microsoft Word and Excel for trend analysis and analytical reports. Demonstrated knowledge of: boiler and/or chiller equipment, operation and maintenance. the refrigeration cycle and how it applies to large (> 1000 ton) centrifugal chillers in pump performance characteristics (temperature, flow and pressure). operating and maintaining high volume steam boilers and steam plant components of integrated heating and cooling plant normal and emergency operations, utilizing a thermal energy storage system, and applying sustainability practices as appropriate to large campus distribution system. Evidence of: effective communication skills EPA /CFC certification Central Plant Operator Senior Six years experience in the operation of boiler and/or chiller equipment and related systems which includes two years experience in the maintenance and repair of boilers and/or chiller equipment and related systems; OR, Completion of a four year federally approved technical training stationary engineer program AND two years of experience in the maintenance and repair of boilers and/or chiller equipment and related systems; OR, Any equivalent combination of experience and/or education from which comparable knowledge, skills and abilities have been achieved. Some positions in this classification may require Chloroflourocarbons Certification upon employment. Employee may be required to possess a valid US Driver’s license of the appropriate class and required endorsements throughout employment. Experience: in operating and maintaining large (>1000 ton) centrifugal chillers with a primary-secondary and/or primary-variable campus distribution system and control parameters (temperature, flow and pressure) with a Siemens DCS SIMATIC S7 Advanced Controllers and DESIGO workstations or equivalent using MS Word and Excel for trend analysis and analytical reports Demonstrated knowledge of: operating and maintaining high volume steam boilers and steam plant components integrated heating and cooling plant normal and emergency operations, energy efficiency techniques, which include utilizing a thermal energy storage system, and applying sustainability practices as appropriate to large campus distribution system the refrigeration cycle and how it applies to large (> 1000 ton) centrifugal chillers Evidence of: EPA 608 Universal certification Working Environment: Work in noisy environment, varying temperatures and confined spaces. Wear personal protective equipment (e.g. safety glasses, face shield, gloves, hearing protection). Bend, lift and carry objects above the shoulder up to 75 pounds (e.g. valves, actuators, small pumps, pipes, ladders, manhole covers, cooling tower fill panels, resin medial cylinders, electrical starters, electrical motors, etc.). Work off ladders to open/close valves, change lamps, repair boilers and chillers, and test safety alarms. May be exposed to hazardous and dangerous materials, tools, and equipment which will require safety precautions and/or specific process to be followed, and may include the use of Personal Protection Equipment (PPE) (e.g. safety glasses, hearing protection, negative pressure and positive pressure respirator). Use of PPE may require medical clearance prior to use. Drive a University vehicle. Department Statement: What’s in it for you? Looking for an employer that offers you solid growth opportunities, as well as an inclusive culture and work/life balance? ASU offers the following: Flexible work schedules 22 days of accrued vacation leave, 12 days of accrued sick leave and 10 paid holidays annually for all staff. Tuition Reduction Program for staff members, their spouses, and dependents, available on day one. For more information visit 12 weeks of paid parental leave following the birth or adoption of a child Affordable benefits package including dental, vision, and life insurance benefits. More information available at Retirement program designed to promote long-term savings and provide income upon retirement which includes Arizona State Retirement System (ASRS) Paid time for volunteer and professional development Wellness program for preventative health education and screenings Disability and leave program for income protection Free and confidential Employee Assistance services, helping to manage personal difficulties or life challenges ASU Discounts to sports/events along with discounts with ASU partnerships ASU Facilities Development and Management (FDM) maintains and services all university-owned property, and develops and constructs innovative and sustainable facilities. FDM’s vision is to contribute to and guarantee the success of the university’s mission by creating and caring for the ASU campus and environment. We provide quality customer service, effectively steward our resources, and meet the needs of the university through creative and collaborative efforts. Facilities Development and Management at ASU employment requires current eligibility to legally work in the United States. Facilities Development and Management will not be a sponsor for this position. Positions available at Central Plant on the ASU Tempe & West Valley campuses, however may require working from other campuses depending on operational need. Must possess EPA/CFC certification, or be able to obtain within six months of employment. Must pass pre-employment physical examination post offer of employment to include audiogram, asbestos worker clearance, respiratory clearance questionnaire and respiratory fit test. Must possess a valid Arizona driver's license (minimum of Class D) upon employment and maintain throughout employment. Post-offer of employment, selected candidate must possess an acceptable driving record which is 5 or fewer points in the most recent 39 month period from date of hire. This position requires working a rotating on-call/stand-by schedule and may be called in for emergency response including nights, weekends, and holidays. Driving Requirement: This position may require driving. Employee must possess a valid US Driver’s license of the appropriate class and required endorsements throughout employment. Location: Instructions to Apply: Current Employees and Students should apply directly within Workday using the Jobs Hub. Use this link and log in using SSO: To be considered, your application must include all of the following attachments: Cover letter Resume/CV Note: Multiple documents can be submitted into the attachment box. Alternatively, merge all documents into one PDF for submission. Please include all employment information in month/year format (e.g., 6/88 to 8/94), job title, job duties and name of employer for each position. Resume should clearly illustrate how prior knowledge and experience meets the Minimum and Desired qualifications of this position. NOTE: GA and Intern positions are counted as .5 for job experience (ie. 1 year equals 6 months experience equivalency). Only electronic applications are accepted for this position. ASU Statement: Arizona State University is a new model for American higher education, an unprecedented combination of academic excellence, entrepreneurial energy and broad access. This New American University is a single, unified institution comprising four differentiated campuses positively impacting the economic, social, cultural and environmental health of the communities it serves. Its research is inspired by real world application blurring the boundaries that traditionally separate academic disciplines. ASU serves more than 100,000 students in metropolitan Phoenix, Arizona, the nation's fifth largest city. ASU champions inclusive excellence, and welcomes students from all fifty states and more than one hundred nations across the globe. ASU is a tobacco-free university. For details visit All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other basis protected by law. Notice of Availability of the ASU Annual Security and Fire Safety Report: In compliance with federal law, ASU prepares an annual report on campus security and fire safety programs and resources. ASU’s Annual Security and Fire Safety Report is available online at . You may request a hard copy of the report by contacting the ASU Police Department at 480-965-3456. Relocation Assistance – For information about schools, housing child resources, neighborhoods, hospitals, community events, and taxes, visit . Employment Verification Statement: ASU conducts pre-employment screening which may include verification of work history, academic credentials, licenses, and certifications. Background Check Statement: ASU conducts pre-employment screening for all positions which includes a criminal background check, verification of work history, academic credentials, licenses, and certifications. Employment is contingent upon successful passing of the background check. Fingerprint Check Statement: A fingerprint check is not required for this position. About Arizona State University Recognized by U.S. News & World Report as the country’s most innovative school, Arizona State University is where students and faculty work with NASA to develop, advance and lead innovations in space exploration. To view full description or to apply please click this link:

Job Title: Software Developer Location: Tempe, AZ Job Type: Full Time Compensation: $110,000 - $140,000 (dependent on experience) Benefits: The position is eligible for medical, dental, vision, and life insurance coverage, & PTO Summary This role focuses on developing and supporting internal business applications and data workflows within a Microsoft technology stack. The developer partners with internal stakeholders to understand operational needs and deliver stable, maintainable solutions using SQL Server, .NET technologies, and related tools. Core Qualifications Technical Skills • Strong working knowledge of Microsoft SQL Server and its ecosystem., • Advanced proficiency in T-SQL, including writing complex queries, developing stored procedures, building views, and supporting reporting requirements., • Experience utilizing SQL Server Management Studio and SQL Profiler to analyze performance and troubleshoot database activity., • Ability to configure, schedule, and maintain SQL Server Agent jobs., • Experience developing reports using SQL Server Reporting Services (SSRS)., • Proficiency with PowerShell (v5 and v7) for scripting, automation, and operational tasks such as data manipulation, routine processes, and deployments., • Comfortable partnering with non-technical departments such as Sales, Marketing, and Purchasing to gather requirements and translate them into technical solutions., • Strong written and verbal communication skills, including the ability to document processes, scripts, and system updates. Technical • Exposure to maintaining or enhancing Crystal Reports., • Familiarity with RESTful APIs, including testing and troubleshooting endpoints using tools such as Postman., • Development experience using C# and ASP.NET (MVC or Razor Pages)., • Experience contributing within small, collaborative development teams., • Self-motivated and comfortable working independently while proactively seeking guidance when needed.

About the Role: We’re looking for a Software Engineer to build and maintain internal line-of-business applications and data integrations. You’ll work closely with business departments to translate requirements into reliable, maintainable solutions. This role focuses on Microsoft SQL Server, .NET, PowerShell, and ERP data interactions, with opportunities to automate processes and support emerging AI initiatives. What You’ll Do: • Develop and maintain applications and data integrations using C#/.NET and SQL Server, • Create and optimize T-SQL queries, views, stored procedures, and reports (SSRS), • Automate tasks with PowerShell scripts and manage SQL Server Agent jobs, • Import/export data between SQL Server and business tools like Excel, • Collaborate directly with non-technical teams (Finance, Purchasing, Marketing, Sales) to deliver solutions, • Support ERP interactions, APIs, and data workflows across departments What We’re Looking For: • 4+ years of professional software development experience in a Microsoft-centric environment, • Strong experience with SQL Server, T-SQL, SSRS, and PowerShell scripting, • Comfortable working directly with business teams and taking ownership of tasks from requirements to implementation, • Experience with REST APIs, C#, ASP.NET (MVC/Razor), or Blazor/Telerik is a plus Team & Environment: • Fully on-site in Tempe, AZ, • Opportunity to be creative in automation and data solutions, with potential AI initiatives in the future

Join a collaborative and forward-thinking IT team where you will play a key role in advancing modern DevOps practices and accelerating software delivery. As a DevOps Engineer, you will lead the design, implementation, and optimization of Azure DevOps pipelines, CI/CD automation, and cloud infrastructure that power reliable and scalable application delivery. In this role, you will partner closely with development, infrastructure, and security teams to build robust continuous integration and continuous delivery pipelines, automate infrastructure and deployment workflows, and improve system reliability. You will also lead technical initiatives, mentor junior engineers, and drive continuous improvement in DevOps maturity, automation, and release management processes. Key Responsibilities Azure DevOps & CI/CD Pipeline Engineering • Design, implement, and maintain enterprise-scale CI/CD pipelines using Azure DevOps to support automated build, test, and deployment workflows., • Manage and optimize Azure DevOps services including Repos, Pipelines, Artifacts, Boards, and Test Plans., • Develop and maintain YAML-based pipeline templates and reusable pipeline components to standardize deployment processes across teams., • Implement automated build validation, security scanning, testing, and release gates within CI/CD pipelines., • Define and maintain branching strategies, pull request policies, and code quality controls within Azure DevOps repositories., • Implement and manage Azure cloud services supporting application hosting, monitoring, automation services, data integration, serverless workloads, secret management, container orchestration, database services, and traffic management., • Automate provisioning and lifecycle management of cloud infrastructure using Infrastructure-as-Code (IaC) tools and scripting., • Develop automation scripts and tooling to improve build, release, deployment, and operational processes., • Monitor and maintain CI/CD pipelines, build agents, and deployment tooling to ensure reliable release processes., • Provide advanced troubleshooting and support for infrastructure, deployment, and application-related issues., • Diagnose and resolve pipeline failures, deployment issues, and production incidents efficiently., • Support auditing, traceability, and reporting processes related to software releases and infrastructure changes., • Participate in on-call rotations as required. DevOps Strategy & Continuous Improvement • Contribute to the organization’s DevOps strategy, CI/CD maturity roadmap, and platform engineering initiatives., • Research and recommend emerging DevOps tools, automation practices, and cloud technologies., • Create and maintain technical documentation for pipelines, automation frameworks, and cloud infrastructure., • Ensure CI/CD pipelines and deployment practices align with security standards, compliance requirements, and DevOps best practices., • Stay current with evolving DevOps technologies through professional development and industry research. Requirements • 5+ years of experience in DevOps, Platform Engineering, or Infrastructure Automation roles, • Strong experience designing and managing CI/CD pipelines using Azure DevOps, • Hands-on experience with Azure DevOps services (Repos, Pipelines, Artifacts, Boards), • Experience building YAML-based pipelines and automated deployment workflows, • Strong scripting and automation skills (PowerShell, Bash, Python, or similar), • Experience implementing Infrastructure-as-Code and automated cloud provisioning, • 3+ years working with cloud platforms, preferably Microsoft Azure, • Experience supporting server environments, database systems, web services, and automated operational tasks, • Strong understanding of Git workflows, branching strategies, and code review practices, • Bachelor’s degree in Computer Science, Information Technology, Software Engineering, or related field (or equivalent experience), • Microsoft Azure or DevOps certifications preferred, • Minimal travel may be required

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do You will join the Content Delivery Platform team, working to deliver excellent in-flight connectivity services for our airline customers and passengers by optimizing video streaming experiences. The CDP team designs, implements, tests, and operates systems critical to customer experiences with a focus on embedded Linux applications. You will with a dedicated team to develop new, creative solutions for applications that play a direct role in improving customer experience. Operating under a DevOps model, the team is responsible for supporting existing software and platforms used by commercial airline passengers every day. As a senior engineer, your responsibilities will be to provide your domain expertise to guide team decisions, make strong technical contributions, and mentor junior staff. This role is for an experienced software engineer who can work with the team to identify and define novel problems then implement a solution autonomously. The day-to-day The team maintains embedded software deployed across several areas of Viasat's network as well as the monitoring and testing infrastructure to operate it. You will • Serve as a Domain Expert, • Design and implement software written in C, with a focus on measurable performance and scalability in a resource-constrained environment, • Provide clear direction on technical decisions that prioritize excellent customer experiences and bandwidth usage optimizations, • Maintain a robust test infrastructure and deployment pipeline that focuses on finding issues early, • Respond to production issues through an on-call rotation, implementing break fixes and designing long term solutions to issues, • Ensure team is using modern development practices, helping incorporate new methodology and tooling when appropriate, • Find opportunities to improve product reliability and security, • Lead or participate in technical design reviews, • 6+ years of professional software engineering experience, • Experience with software development in C/C++, • Experience with Linux and Networking concepts, • Experience writing and presenting technical designs, • Experience or eagerness to learn Agile Scrum methodologies and DevOps practices, • Detailed problem-solving approach, coupled with a strong sense of ownership and drive, • Experience with software development in Python, • Experience with container technologies (Docker, Kubernetes), • Experience with GitHub Actions, • Experience with Nginx configuration and module development, • Experience with software configuration tools such as Ansible, • Experience with Cloud services (AWS, GCP, etc.), • Expertise in designing, analyzing, and improving large-scale distributed systems, • Ability to work on distributed remote agile teams with a high degree of self-motivation and independence $161,000.00 - $255,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $200,500.00- $300,500.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

Engineering Role with Industry Leader / $100,000 - $130,000 per year based on Experience / Room for Growth and Great Benefits This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $100,000 - $130,000 per year A bit about us: The Engineer is responsible for designing, developing, testing, and improving systems, products, and processes to meet performance, quality, and safety requirements. This role involves applying engineering principles to solve technical challenges, support production activities, and drive continuous improvement across operations. Why join us? $100,000 - $130,000 per year depending on Experience Room for Growth Excellent Benefits Job Details Key Responsibilities Design, develop, and modify components, equipment, and systems based on project requirements. Create and interpret technical drawings, models, and specifications. Conduct testing, data analysis, and validation to ensure products meet quality and performance standards. Troubleshoot mechanical, electrical, or process issues and implement effective corrective actions. Collaborate with cross-functional teams including production, quality, and maintenance. Manage project timelines, documentation, and technical reports. Support continuous improvement initiatives to enhance efficiency, reliability, and safety. Ensure compliance with industry standards, engineering codes, and company procedures. Qualifications Degree in Engineering (Mechanical, Electrical, Industrial, or related field). Strong analytical and problem-solving skills. Proficient with engineering software, tools, and measurement systems. Ability to read and create technical drawings, schematics, and CAD models. Excellent communication and project management skills Must Have - PC-DMIS Software, CMM Manager Software, or Geomagic Design X Software Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Spec, Manufacturing Engineer Job Code: 35353 Job Location: Tempe, AZ Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: Develops, implements and analyzes manufacturing engineering plans and projects and communicates them to internal and external customers. Defines, develops and transfers manufacturing and engineering tools, strategies and systems. Develops manufacturing strategies for specific products and processes. Actively participates with engineering project teams in order to coordinate the release of new products. Estimates and tracks manufacturing costs, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines. Maintains records and reporting systems for coordination of manufacturing operations. The candidate will perform a variety of engineering work in the development, improvement, and optimization of multiple processes and techniques, including vacuum deposition of inorganic and metallic films, glass processing, chemical etching and handling, robotic material handling, materials analysis, and characterization. The work will include improving and optimizing current processes, implementing new tooling, improving existing tooling, and creating robust technical documentation on existing processes and tooling. Essential Functions: \n • Implementing manufacturing standard work and best practices to improve operational metrics. \n, • Work with existing and legacy equipment \n, • Control and improve existing processes \n, • Perform failure analysis and risk mitigation \n, • Complete technical writing and training related tasks \n, • Coordinate with maintenance group for equipment upkeep and training \n, • Ability to obtain a US security clearance \n\n Qualifications: • Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. \n Preferred Additional Skills: \n • Strong problem-solving and data analysis skills \n, • Electrical, Materials, or Chemical Engineering background preferred \n, • Hands-on experience with deposition tooling\n, • Experience with legacy tooling, code, and equipment\n, • Robust project management and technical writing skills \n, • Ability to communicate project status and risks to leadership team \n, • Experience in different surface engineering for metals, glasses, and intermetallic materials \n, • Experience with heat treatment of different metal alloys and glasses \n, • Expertise in making data driven decisions to improve and develop processes \n, • Experience using DFM, Six-Sigma and/or Lean Manufacturing Principles \n, • Experience using DMAIC process and associated tools \n, • Experience with using statistical software (e.g. Minitab) \n, • Experience using SQL \n\n #LI-CB1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Job Title: Comm and Telecomm Engineering Professional Intermediate Duration: 12 months Location: Tempe, AZ 85282 Worksite: Onsite | 8:00 AM - 05:00 PM Responsibilities: We're looking for a Telecommunications Systems Engineer who is excited about working on projects that enable the heart of our clients' business. This position will provide opportunities to lead portions of very large and complex projects as a telecom scope owner working in conjunction with other telecom design professionals and supporting design staff while collectively producing challenging design packages. This is done in coordination with architects and other discipline engineers / design leads all under one design team. You will interface directly with our client counterparts to design these facilities to meet their needs. Our teams leverage AutoCAD and Revit MEP design software to create fully coordinated 3D models across all disciplines (C,S,A,M,E,P,T,I,L). Through a mixture of full 3D BIM delivery, construction specifications and 2D sheets, you will help lead the design of everything from Outside Plant (OSP) to inter / intra-building backbone distribution systems, communication room layouts, rack elevations, wired & wireless device plans and cable schedules. All facets of the designs and calculations will be completed in accordance with the NEC, applicable TIA and other industry standards as well as Client and/or the client specifications as applicable. Qualifications: Here's what you'll need: • Two-year technical degree or four-year non-technical degree, • At least 4 years of relevant experience in telecommunications design and construction industry, • Knowledge & application of telecommunications industry association (TIA) standards, • Knowledge & application of BICSI (Building Industry Consulting Services International) design practices, • Knowledge & application of NFPA 70 (NEC) and electrical design requirements, • Experience leading a telecommunications design team, • Knowledge of design and construction specifications, • Experience estimating and scheduling small to medium size projects Ideally, you'll also have:, • Associate degree, • At least 3 years of telecommunications design experience in semiconductor or data centers, • Project management experience, • Working knowledge of 3D BIM software (Revit), • Knowledge and design experience with paging, intercom, and audio-visual systems, • Knowledge of control systems and network topology, • One or more of the following certifications: RCDD (Registered Communications, • Distribution Designer), DCDC (Data Center Design Consultant), OSP (Outside Plant), or RTPM (Registered Telecommunications Project Manager)

Job Description Overview Circet USA is the leading provider of Network Services in North America, and we're looking for talented professionals to join our team. We specialize in engineering and construction services delivering comprehensive solutions across Inside Plant, Outside Plant, and Wireless networks to meet the evolving infrastructure needs of our customers. With nearly 50 years of industry experience, we work with major telecom service providers, MSOs, cloud service providers, and utilities. At Circet USA, you'll have the opportunity to make an impact by helping to create customized solutions that address our clients' unique challenges. If you’re passionate about innovation and thrive in a dynamic environment, we’d love to hear from you. Circet USA’s benefits package includes the following: • Medical, Dental, and Vision insurance, • Digital Health & Wellness Support, • Critical Illness, Accident, & Hospital Insurance, • Short-term & Long-term disability, • Group term & Voluntary life insurance, • Flexible Spending and Health Savings Accounts, • Paid Time Off & 401K, • Company Discount Website Responsibilities Summary: A Principal RF Engineer is a senior-level engineering professional who designs and develops radio frequency (RF) systems and components. They are responsible for overseeing the development of complex RF systems and ensuring their performance meets project requirements. ESSENTIAL DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned: • RF System Design: responsible for designing and developing RF systems for a variety of applications, including wireless communications, radar, and satellite communications., • Technical Leadership: Will provide technical leadership and guidance to other RF engineers, ensuring that designs meet performance requirements and are delivered on time and within, • System Integration: Will work closely with other engineers to integrate RF systems with other components, including hardware and software., • Test and Evaluation: Will oversee the testing and evaluation of RF systems, ensuring that they meet performance requirements and are reliable and efficient., • Troubleshooting: Will be responsible for troubleshooting and resolving complex RF design and testing issues and providing technical support to other engineers and technicians., • Documentation: Will be responsible for creating and maintaining technical documentation, including design specifications, test plans, and reports., • Innovation: expected to stay up to date with the latest developments in RF technology, and to incorporate new and innovative ideas into, • Customer Interaction: Work closely with customers to understand their requirements and to provide technical expertise and support throughout the development process. SAFETY DUTIES & RESPONSIBILITIES • Adhere to, promote, and accept personal responsibility for compliance to:, • Federal and Local Occupational Safety and Health Regulations, • Industry Consensus Standards, • Circet USA Injury and Illness Prevention Program Manual, • Participate in job site safety/hazard analysis Qualifications EDUCATION, EXPERIENCE, and/or QUALIFICATIONS • Education: A Bachelor's or Master's degree in Electrical Engineering or related field is required., • Experience: At least 10-15 years of experience in RF design, analysis, and testing is required., • Technical Skills: strong technical background in RF design, analysis, and testing is requiredas well as proficiency in using software tools such as MATLAB, ADS, and HFSS. Experience with network analyzers, spectrum analyzers, and other RF test equipment is also important., • Leadership Skills: strong leadership skills and experience leading teams of engineers and technicians., • Project Management Skills: experience in project management, including defining project scope, developing schedules, and ensuring that project deliverables are met on time and within budget., • Communication Skills: excellent communication skillsto work with cross-functional teams, including hardware, software, and system engineers. Require ability to clearly articulate technical information to both technical and non-technical stakeholders., • Problem-Solving Skills: strong problem-solving skills, as the position is responsible for troubleshooting and resolving complex RF design and testing issues., • Attention to Detail: strong attention to detail, as even small design or testing errors can have significant consequences in RF systems., • Innovation: have a passion for innovation and keeping up with the latest developments in RF technology., • Professional Certifications: Certifications such as Certified Wireless Network Professional (CWNP) or National Instruments Certified LabVIEW Developer (CLD) can be a plus, although not always required. Additionally, a RF Principal may be required to have security clearances for certain government or defense-related projects. POSITION QUALIFICATIONS/ REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to read, analyze and interpret common scientific and technical journals, financial reports and legal documents; ability to respond to common inquiries or complaints from customers, regulatory agencies or members of the business community; ability to effectively present information and respond to questions from Executive Management, public groups clients and/or customers. Able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists; ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Circet USA is an Equal Opportunity Employer - Veteran/Disabled. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law. Pay Range in the United States: $120K - $191K based upon geography, skills, and experience. May also be eligible for performance incentive opportunity based on company and individual goals and performance.

Key Responsibilities - Craft realistic developer prompts across multiple categories (code review, debugging, error diagnosis, configuration, and more) - Source and adapt content from real PRs to create authentic scenarios - Write clear, technically accurate model responses that demonstrate strong re

About Mercor’s talent network This is an open application for future contract opportunities that match your background and interests.Once you complete your profile and pass our AI interview, you'll be eligible for relevant projects as they become available.We match experts to opportunities on

Job DescriptionSalary: The Design Engineer III is responsible for designing fire protection systems, conducting all steps to ensure quality and compliance, and coordinating with cross-functional teams and customers. Role and Responsibilities • Design moderately complex fire sprinkler systems, • Produce hydraulic calculations and system sizing for projects, • Collaborate with cross-functional teams such as sales, purchasing, fabrication, installation, and service to ensure water-based fire sprinkler system designs meet customer needs, quality, safety standards, and project timelines, • Coordinate with engineers, contractors, and AJHs independently, • Ensure design adheres to state and local standards for the design of water-based fire sprinkler systems, • Use CAD in the design of fire protection systems, • Conduct construction site review/survey on buildings if needed., • Submit plans to General Contractors/owners and follow specifications., • Finalize fabrication techniques with the appropriate stakeholders, • Complete final shop drawings showing all pertinent information, • Generate materials lists for completed designs, • Compile the foremans pack, including all necessary forms and paperwork., • Process all necessary close-out documents, • NICET III certification and/or 5+ years of current fire sprinkler design experience, • Comprehensive knowledge of NFPA standards 13, 13R, 13D, 14, 20, 22, and 25, • Ability to interpret and apply complex code requirements, • Working knowledge of one or more of the following CAD software platforms: AutoCAD, Autodesk Revit, Autodesk BIM 360, Autodesk Inventor, SolidWorks, Hydra CAD, AutoSPRINK, SprinkCAD, or SprinkFIT, • Ability to complete BIM coordination, • Apply mathematical concepts, such as geometry, fractions, and measuring, • Ability to read and interpret documents, such as blueprints, codes, standards, specifications, safety rules, and operating and maintenance instructions, • Analytical and critical thinking skills, • Ability to communicate effectively in person and electronically, • Time management and organizational skills, • Proficient with Microsoft Office Suite Physical Demands While performing the duties of this position, the employee is frequently required to sit, stand, communicate, reach, and manipulate objects, tools, or controls. This position requires mobility, with minimal physical exertion. Working Conditions Usual office working conditions. The noise level is typical of most office environments. Can be exposed to sound and noise levels that are distracting when on a jobsite. We believe it is our responsibility to ensure that each of us works safely and productively, goes home healthy, and considers the environment in our actions, each and every day. Management is committed to providing a safe and healthy work setting and protecting the environment as a key tenet of our culture and a primary mission. All employees are required to adhere to ISO and OSHA policies established by the company and shall have high values for safety awareness and be mindful of environmental impacts associated with each job task. The above declarations are not intended to be an all-inclusive list of the duties and responsibilities of the job described or of the skills and abilities required to perform the job. Rather, they are intended only to describe the general requirements of the job.

Job DescriptionAre you a friendly problem solver who can deliver a five-star experience to our guests? Then you might be perfect for the maintenance engineer role at our hotel. You will be responsible for supervising the property's complete maintenance and routine processes to make it fully functional, enjoyable, and safe. Our ideal candidate is committed to helping our guests actively and consistently. If this describes you, and you're ready for an exciting career in hospitality, apply now!Compensation: $18.50 - $19 hourly Responsibilities: • Keep an open line of communication with other team members and staff, • Adhere to all engineering safety norms and procedures, • Work in collaboration with other technicians who will assist you with a variety of maintenance tasks, • Respond to emergencies that occur outside of regular working hours, • Tend to all of the hotel's equipment and conduct preventive maintenance routinesQualifications:, • This position requires occasional lifting up to 50 lbs., • Valid driver’s license and good driving record required, • Applicants must have 2-4 years of experience in maintenance, • Excellent organizational, interpersonal, and communication skills are necessary, • Ability to use web-based software, including facilities maintenance software preferredAbout Company Our signature "Count on Me" service culture encourages each team member to be responsive and respectful, and deliver great experiences to our guests, partners, and communities. OUR CORE VALUES • Integrity: We hold ourselves to the highest standards. We’re responsible, truthful, and transparent. We do the right thing., • Accountability: We honor our commitments and deliver results. Under any circumstance, we stand up and say: “Count on Me.”, • Inclusive: We respect differences in people, cultures, ideas, and experiences. We foster partnership. We welcome all., • Caring: We never underestimate the power of compassion. We generously give our time, attention, and action., • Fun: Fun is an energizing force. When we have fun doing what we love, our guests love their experiences with us.

Job Description Hazen and Sawyer is seeking a Wastewater Project Engineer for our Arizona offices located in Tempe, Tucson, and Goodyear. As part of our design and process teams, you will be involved with a wide range of wastewater infrastructure projects. This will encompass all phases of design, including conceptual/feasibility evaluations, project management, preparation of design reports, permitting, development of construction drawings and specifications, and support of construction services. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management, • We foster a work environment low on bureaucracy and high in creativity, • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed, • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK, • Support the development of technical treatment strategies, selection of treatment processes, developing process design criteria, and delivering projects, • Support coordination and collaboration with clients, • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Support planning, design, permitting, and construction of wastewater-related projects., • Experience working with interdisciplinary teams to effectively meet the client’s needs, • Candidate shall also be able to support preparation of proposals and presentations, • Bachelor's degree in civil/environmental engineering, • PE license, • 5-12 years of experience in the field of wastewater-related infrastructure, including project engineering/management (planning, design, and construction), • Experience in successfully delivering supporting projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionDescription: Methods Machine Tools, Inc. supplies high-quality, high-precision machine tools and automation solutions, and designs integrated custom machining processes and systems. Headquartered in Sudbury, Mass., and in operation since 1958, Methods provides an end-to-end portfolio of best-in-class products, engineering, service, parts, training, and integration. Methods has more than 300 employees, seven technology centers, one high precision machining center, and has installed in excess of 45,000 machines throughout North America. The following position is available at our office in Tempe, AZ: Applications Engineer Position Overview: This position is responsible for supporting the application, setup, programming, and operation of CNC machines. The ideal candidate will have expertise in CNC programming, machining processes, and the ability to support customers with technical issues. Position requires occasional overnight travel. Key Responsibilities: • Technical Support: Provide technical application support to customers, both remotely and on-site, ensuring CNC machines are running efficiently., • Machine Setup & Operation: Assist in the initial setup and configuration of CNC machines, ensuring optimal machine performance., • Programming & Troubleshooting: Develop, modify, and optimize CNC programs. Troubleshoot and resolve any issues related to machine operations, including software and hardware challenges., • Customer Training: Train customers on CNC machine operations, programming techniques, and machine maintenance to maximize productivity and ensure safety., • Documentation: Create and maintain detailed documentation for programming, procedures, and troubleshooting steps., • Product Testing: Conduct tests and demonstrations of new CNC systems, providing feedback to engineering and product development teams., • Collaboration: Work closely with sales teams to tailor CNC solutions to customer needs., • Education: Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related field. Relevant certifications and training in CNC technologies are a plus., • Experience: Minimum of 10 years of hands-on experience with CNC machine operation, programming, and applications in manufacturing or production environments., • Skills:, • Proficiency with CNC programming languages (e.g., G-code, M-code, Fanuc), • Strong knowledge of CNC machine types (e.g., mills, lathes, multi-axis machines)., • Understanding of machining processes, cutting tools, and materials., • Experience in troubleshooting and resolving technical issues with CNC equipment., • Excellent problem-solving and analytical skills. Strong communication skills for customer support and internal collaboration., • Ability to train and mentor staff or customers effectively., • Experience with CAD/CAM software, • Familiarity with automation and robotics in CNC manufacturing environments., • This position may require travel to customer sites for installations, training, and support. · Medical, Dental, Vision, Paid time off, Education Assistance, 401(k) Plan, and great opportunity for career growth. Methods Machine is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Requirements:

Job Description #LI-MN1 Build More Than Just Buildings—Build Your Career. At FCL, we build more than buildings—we build communities, careers, relationships and trust. As a Project Engineer, you’ll be an essential part of our team, helping ensure projects run smoothly, safely, and successfully from start to finish. If you’re someone who thrives in a fast-paced environment, loves solving problems, and wants to grow in the construction industry, this is your opportunity. Why Join FCL Builders? • Make an Impact: You’ll play a key role in projects that transform communities and serve industries nationwide., • Become an Employee Owner: Partner and collaborate with experienced professionals who are invested in your success., • Grow With Us: Our Project Engineers are on a clear path to become Assistant Project Managers, Project Managers, and beyond., • Supportive Culture: We believe in mentorship, open communication, and having each other’s backs., • Great People, Great Workplace: Thanks to our people, FCL is proud to have earned Great Place to Work Certification for the second year in a row. Our company culture is our top priority! What You’ll Do: Project & Construction Management • Assist in bid solicitation and subcontractor prequalification, • Help prepare permits and documentation, • Coordinate pre-construction meetings with superintendents and subs, • Support jobsite setup—field offices, dumpsters, temporary utilities, etc., • Assist with subcontractor scope development and contract tracking in CMiC, • Manage and track submittals, RFIs, and shop drawings, • Keep logs organized and up to date—procurement, submittals, RFIs, safety, etc., • Ensure documentation and drawings get to the field on time, • Track material lead times and deliveries to keep the schedule moving, • Attend and document meetings; help with project closeout and warranty packages, • Ensure quality standards are upheld, • Participate in regular site walks and safety awareness, • Maintain clean project records and documentation, • Foster strong working relationships with clients, subcontractors, and project teams, • Communicate effectively and solve problems collaboratively, • Help review and process subcontractor and owner change orders, • Ensure timely and accurate documentation and approvals What We’re Looking For: • Bachelor’s degree in Construction Management, Engineering, or related field (or equivalent experience), • Strong organizational skills and attention to detail, • Familiarity with construction documents and processes, • Experience with project management software (CMiC a plus), • Strong communication skills—written and verbal, • A team player with a proactive mindset What We Offer: • Competitive salary, bonus structure, • Employee Stock Ownership Plan (ESOP), • Career development and mentorship programs, • Comprehensive and competitive benefits (health, dental, vision and so much more!), • Paid time off and holidays, • An inclusive, collaborative culture where your voice matters Ready to build your future with FCL? Apply today and let’s grow together. FCL Builders is an equal opportunity employer that is committed to inclusion and diversity. All qualified applicants will be considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected status. FCL Builders participates in E-Verify, click here to view the Right to Work Poster.

Job Description Hazen and Sawyer is seeking a Water Treatment Project Engineer for our Arizona offices located in Tempe, Tucson, and Goodyear. This role will support project engineering and management, and the development of water and potable reuse projects throughout Arizona, the Southwest and across the country. You will be a part of the Hazen Water and Reuse practice groups engaging, collaborating, and supporting water and reuse projects, and opportunities across the country as needed Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Your role will include, project engineering/management, design, planning, operational support with a focus on water treatment / reuse and drinking water projects, • Supporting proposal development., • Mentor junior drinking water staff., • Coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Supporting projects to meet client expectations, budgets, and quality requirements., • Following internal Hazen processes to ensure quality delivery of engineering projects for clients., • Technical responsibility for interpreting, organizing, executing, and coordinating assignments on small to medium projects., • Bachelor's degree in civil/environmental engineering, • PE license, • 5-12 years of experience in municipal water treatment, water quality, water treatment technology, or manufacturing, • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200 personnel specializing in water and wastewater engineering and construction management. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced Civil Project Engineer (Grading/Drainage/Pipeline Design) to join our team. This position requires 40 hours per week in our Tempe office (This job is not remote nor hybrid). Looking to move to the Greater Phoenix area? Relocation assistance available! Essential Duties and Responsibilities • Create Grading and Paving designs utilizing Civil 3D feature lines and corridors to create highly accurate finish ground surfaces., • Create Sewer and Water pipeline designs utilizing gravity and pressure pipe networks within Civil 3D., • Create/label exaggerated paving, sewer, storm drain and water profiles in Civil 3D, • Understand advanced survey principles, able to import survey field points into Civil 3D, capable of generating easement/property boundary linework from legal descriptions, create/edit existing ground surfaces in Civil 3D, prepare legal description/graphic based on CAD linework and convert grid coordinates to ground coordinates based on scale factors., • Process LIDAR point cloud data in Recap and utilize to create existing ground surfaces in Civil 3D, • Ability to take technical direction from Project Managers or Principals and complete design tasks and elements., • Must possess a Bachelor of Science in Civil Engineering., • Requires a minimum of four (4) to eight (8) years of Grading and Drainage/Utility Pipeline design experience including construction-related engineering services., • A current Arizona Professional Engineer (P.E.) license preferred - EIT with ability to obtain PE license within 12 months required., • Experience working in Grading and Drainage and Utility Pipeline fields. Relevant experience shall include site vertical grading design, drainage/sewer/water report preparation and specification writing., • Construction-related engineering services experience with the ability to review Shop Drawings, Specification, RFIs, issuing Engineers Directives etc., • Computer experience with Microsoft Word, Excel, Outlook, • Proficiency with Civil 3D, DDMSW (Rational Method and HEC-1 Models), CulvertMaster, FlowMaster software., • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job Description Job Title: Senior Network Engineer Location: Tempe, AZ (in-office with travel up to 30% of the time) Salary: $110,000 - 140,000 As a Senior Network Engineer, you will be responsible for the technical support and maintenance of all ASRC and subsidiary enterprise network infrastructure and related systems. Your role: • Design, deploy and manage all company switching, routing, firewall, VPN, wireless, cable plants, and network management systems across a wide range of complex architectures, platforms and mediums., • Lead engineer on assigned network upgrade projects., • Mentor and train junior network engineering staff to ensure they have the tools to be successful., • Effective communication skills and customer service with the ability to communicate IT issues to Sr IT Leadership., • Define and follow standards and best practices for network design, testing, and implementation methodology., • Document the environment as needed., • Manage cloud networking components, native and vendor appliances, to ensure connectivity between systems., • Provide day to day support to ASRC IT customers by ensuring IT service tickets assigned are being addressed and resolved within established SLA parameters., • Installs, configures, manages and troubleshoots various network, infrastructure, hardware and software components., • Respond to service/work requests that fall into the Network Administration queue in a timely fashion., • Support various business units across the company., • Manage critical escalations to 3rd Parties and vendor support when required., • Works directly with Telco/ISP to troubleshoot existing or onboard new services., • Balance the ability to provide day-to-day support and quickly respond to new issues, while still ensuring that project efforts are delivered on time with high quality, • Effectively use monitoring/administrative tools to maintain network uptime and efficiency., • Configure and deploy routers and switches What you’ve got: • Bachelor’s degree in information systems, computer science, engineering, or a related field, with 8–10 years of progressively responsible IT experience. Equivalent education and experience may substitute., • Strong background with Cisco hardware and IOS configuration/troubleshooting; CCNA/CCNP/CCDP certifications preferred., • Experience with Cisco Meraki hardware and configuration preferred., • Expertise with VLAN, VPN, BGP, EIGRP, OSPF, and QoS., • Hands-on experience with Cisco routers, Nexus and Catalyst switches, ASA firewalls, and 802.11 wireless systems., • Proficiency with Palo Alto firewalls and Panorama centralized management., • Deep knowledge of spanning tree, ARP, CDP, EIGRP, BGP, VTP, EtherChannel, STP, 802.1Q trunking, HSRP, multicast, IPsec, RADIUS/TACACS+, SNMP, and related protocols., • Preferred experience with Cisco Data Center technologies including Nexus, virtualization, and FCoE., • Familiarity with standards-based network monitoring and management tools., • Strong written and verbal communication skills, with the ability to create documentation and present to groups effectively., • Data Center routing and switching experience, • Network security experience, • An ability to think critically about systems and to make adjustments consistently as needed. To find more great tech-centric jobs, please visit .

Job Description Summary Our client is a leading and established IT Solutions Firm in the Scottsdale, AZ area that is seeking a professional senior system engineer (IT Engineer) to join their team. This position will consult, design, and implement IT advanced solutions. This position will also troubleshoot complex problems and mentor junior team members while being on a specific track towards CIO level consultancy. As an IT organization, they work on the latest technology from the top IT solution manufacturers and bring those technologies to solve their clients’ challenges and help them find strategic direction. If you are seeking to advance your career in a big way, then this just might be the opportunity that you've been seeking. Duties & Responsibilities • Implementing, Monitoring, and Troubleshooting Microsoft Cloud with various customers, • Various System Administration duties, • Project Management, • System Design, • Working with technology vendors, • Consulting and deployment of server and network solutions., • Client Strategical Plan Development, • Advanced diagnostic and remediation of server and network solutions., • Write clear and concise documentation and instructions., • Ability to manage and prioritize multiple tasks in fast paced environment., • Participate in on-call rotation., • Extensive knowledge of Active Directory and Windows Server Technologies (Windows Server, Exchange, RDS, SQL, IIS ...), • Experience with cloud technologies (Azure, O365, AWS, Google, G-Suite ...), • Confident with diagnostic, repair and installation of server and network systems., • In-depth working knowledge of virtualization including VMWare, Nutanix, SANS and clustering., • Knowledge of networking technologies including TCP/IP, VLANS, routing, switches, firewalls, DNS, VPN, and VoIP. (Cisco, Fortinet, Sonicwall), • Knowledge of RMM technologies, commonly used in MSP environments, such as NinjaONE, Kaseya, or Connectwise, • Experience working with PSA Ticketing Software Solutions, such as Autotask or Connectwise., • Working knowledge of security policies and NIST controls., • Mastery and certified in one or more of the following:, • Microsoft Servers, Fortinet, Cisco, VMWare, Nutanix, Windows Server, Storage Networking, • Education: Bachelor’s degree required, • Experience: 5+ Years systems design, administration, installation, and troubleshooting, • Preferred Certifications:, • MCSA Server or MCSE, • Cisco, • Fortinet, • VMWare, • Nutanix

Job Description Location and Travel This is a remote position; however, preference will be given to candidates located in Austin, TX, Phoenix, AZ, Atlanta, GA, Reno, NV, Grand Rapids, MI, or Las Vegas, NV. This position may require periodic travel to the locations listed above for site visits, project meetings, and team collaboration. Company Description Meade is a full-service design firm specializing in innovative and cost-effective engineering solutions for data centers, cloud providers, and other large-scale construction projects. Our team of expert engineers, designers, and consultants is dedicated to delivering high-quality, reliable, and sustainable solutions that drive the industry forward. At Meade, we foster a collaborative and dynamic work environment where technical excellence, innovation, and professional growth are core values. If you're looking to lead cutting-edge design initiatives and help shape the future of mission-critical infrastructure, we want to hear from you Position Summary: The Principal Mechanical Engineer will serve as a technical leader and Engineer of Record (EOR) for mechanical systems on complex data center projects. This individual will be responsible for leading design efforts, overseeing project delivery, and mentoring junior engineers. The role requires deep technical knowledge of mission-critical HVAC, cooling, and mechanical infrastructure systems, as well as a proven ability to lead multidisciplinary teams through design, coordination, and construction phases. Key Responsibilities • Serve as Engineer of Record (EOR) for mechanical design on data center projects., • Lead the design and engineering of HVAC, chilled water, and other mission-critical cooling systems., • Develop, review, and approve technical drawings, specifications, and submittals., • Coordinate with internal design teams and external stakeholders including clients, architects, and contractors., • Oversee mechanical design from concept through construction, ensuring quality, accuracy, and compliance with codes and standards., • Conduct system analyses, equipment selections, and energy efficiency evaluations., • Provide technical guidance and mentorship to junior and mid-level engineers., • Manage project budgets, schedules, and deliverables to ensure on-time, high-quality outcomes., • Review and seal design documents as required under state licensure., • 8+ years of experience in mechanical engineering design, with at least 5 years focused on data centers or mission-critical facilities., • Master's Degree in Mechanical Engineering., • Professional Engineer (PE) license required and in good standing., • Demonstrated experience acting as Engineer of Record (EOR) for mechanical systems., • Strong leadership skills with proven experience managing and mentoring engineering teams., • In-depth knowledge of ASHRAE standards, building codes, and energy modeling principles., • Proficiency in Revit, AutoCAD, and mechanical design software (e.g., Carrier HAP, Trace 700)., • Excellent communication and client-facing skills., • Experience with hyperscale or colocation data center projects., • Knowledge of sustainability and energy efficiency practices. All full-time employees receive a comprehensive benefit package that includes, but is not limited to, medical, dental, and vision insurance with 100% of medical premiums covered by the employer, short and long-term disability insurance, life insurance, a 401k plan, vacation time, paid holidays off, and yearly performance-based bonus eligibility. Meade is an Equal Employment Opportunity employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status.

Job DescriptionBenefits: • 401(k), • Health insurance, • Training & development As an Applications and Service Engineer, you will be an integral part of the customers' success with Vicivision America. Job duties and responsibilities include but not limited to: Assisting end users and Vicivision representatives as the technical expert of our product lines. In-house testing of customer applications in our Scottsdale showroom. Assist Vicivision sales staff with technical topics during product application demonstrations and trade shows. Installation and calibration of Vicivision systems domestically and internationally. Training customers on the proper use of Vicivision hardware and software. After-sales support and troubleshooting of Vicivision hardware and software. Creating technical documents and procedures for internal and external use. Participate in setup, teardown, and staffing of Vicivision trade show booths. Required qualifications: MUST BE A US CITIZEN & RESIDENT. Associate degree in a technical field required. Bachelor's degree in a technical field preferred. Previous experience with GD&T, metrology, CNC turning, CMM's, and industrial manufacturing preferred. Willing and able to travel 50% to 60% of the time domestically and internationally. Willing and able to work onsite in customers manufacturing facilities, while wearing all required Personal Protective Equipment and observing all safety rules. Adhere to all US export control laws, such as ITAR, while working with sensitive documents and parts. Strong interpersonal skills. High level of technical communication skills. Familiarity with CAD. Adaptive to changing deadlines and travel schedules on short notice. Strong analytical and critical thinking skills. Must pass a background check and drug test. Must have valid US drivers license and reliable transportation. What we Offer: Competitive pay Profit Sharing 401k Health insurance Dental insurance Medical insurance Paid time off Personal development

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200+ personnel specializing in water and wastewater engineering and construction management services. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced Electrical Design Engineer to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote.) Essential Duties and Responsibilities· Proficient in the design of low voltage power distribution systems and lighting systems, including single-line diagrams, panel schedules, power plans, lighting plans, control schematics, block diagrams, and installation details.· Proficient in completing engineering calculations, including load summaries, breaker sizes, conduit and wire sizing, voltage drop, and fault current.· Proficient with Microsoft Office suite and AutoCAD software.· Good understanding of the NFPA 70E National Electrical Code.· Strong ability to work independently and efficiently on small to medium electrical and control system design projects.· Ability to read and understand P&IDs and control descriptions.Experience in construction administration, field inspection, start-up and commissioning. Requirements· Associate's degree in electrical engineering technology required. This requirement may also be fulfilled with 5 years minimum electrical and control design experience.· Working knowledge of National Electrical Code· Minimum of five (5) years electrical and industrial controls engineering experience in Water/Wastewater industry is preferred.· Minimum of five (5) years of experience producing EI&C Contract Drawing packages in AutoCAD. BenefitsThe comprehensive benefits plan offered by Wilson Engineers exceeds industry standards, and is aimed at meeting each employee's personal and professional expectations. Benefits include personal time off, paid holidays, medical, dental and vision coverage; plus a flexible spending plan and short and long-term disability. Wilson Engineers also helps in securing your financial future by offering 401k plans with employer matching.Benefits plan offered to our full-time employees: • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job Description Our client in the renovation industry is seeking an experienced Project Engineer to join their team in Scottsdale. As a Project Engineer, you will support the Project Management team to ensure successful project completion while maintaining rigorous standards of document control. You will play a vital role in coordinating communication, tracking key project milestones, and maintaining records. Responsibilities • Assist Project Managers throughout the construction process., • Prepare and manage pre-construction documentation for tenant and subcontractor meetings., • Track and maintain logs for RFIs, Submittals, and Change Orders., • Record and distribute OAC meeting minutes and other project documentation., • Upload and organize project files in OneDrive., • Collaborate on owner updates, project closeouts, and energy rebate submissions., • Assemble monthly draw packets and other administrative tasks as assigned. Qualifications • Proficiency in managing CORs, SCOs, POs, RFIs, and Submittals., • Strong analytical skills and blueprint reading expertise., • Excellent communication and interpersonal abilities to engage with team members, subcontractors, and stakeholders., • Tech-savvy, with experience in Excel, MS Project, and construction project management software., • Ability to travel as needed and hold a valid driver’s license in good standing. Details • These are full time, hourly (40 hrs/wk), direct hire positions, • Salary range: $70k-$85k, • Plus Bonus, • Plus full benefits

Job Description We are looking for a Technically Engineer minded individual to learn how to help run an optical surfacing dept. Full training for the right candidate. Training would start 10AM-7PM for a month+, second shift would start at 3pm-11pm To be successful in this role, you should be a confident decision-maker, trouble shooter, problem solver and independent. We need to strive for quality and production. • Learn optical manufacturing, • Prepare lenses for optical production, • Run & manage surfacing generators, • Run & manage lens polishers, laser engravers, • Identify lens materials, base curves, sizes, • Understand progressive designs, markings, SV, flat tops, • Calibrate equipment, • Clean & Prep equipment for next production day, • Machine/Generator Satisloh, OptoTech, Schneider, • Mathematics, software, calculations,, • Understanding nematic pressure which runs all the robotics on our equipment., • Hard Coaters, AntiFog, • MEI edger's, National Optronics, • Lensometer Manual and Auto, • Lens knowledge Power, Cyl, Axis, Seg. Heights, PD's, Prism, slab offs, etc., • Optical experience a plus but not necessary

Job Description The Project Engineer assists and supports the Project Manager on assigned projects. The position works under direct supervision, performs routine daily activities, gathers, and distributes information. The Project Engineer must be a flexible and adaptable team player, as well as have strong communication and client service skills. Project Engineer Major Duties & Responsibilities: • Coordinates with project architects, designers, owners, and field personnel., • Responsible for preparing, reviewing, distributing, and tracking Request for Information (RFI) and Submittal packages., • Assist in preparations of bid packages and procurement, • May be responsible for bid analysis, constructability reviews, and permit processing., • Inspects all work to assure compliance with plans and specifications., • Offers technical information to project supervisor to ensure work complies with applicable codes, drawings, and specifications., • General understanding of project budget; may assist with buyouts, • Monitor and track project quality control metrics and activities on a regular basis, provide timely and accurate quality reports, and raise issues to PM or Superintendent as appropriate., • Change Order management, including soliciting, receiving, reviewing, and preparing action and change orders, • Maintain accurate contract documents, • Generation of project punch list and closeout documentation., • Update construction schedule based on project team input, Trade Contractor progress and materials delivery, • Track and inspect material deliveries, • Assist in preparation of monthly owner project status reports, as required, • Attend project meetings, as directed by Project Manager and record meeting minutes, • Demonstrate commitment to an Injury-free environment through own actions and mentoring others, • Assist Senior Project Manager, • Other duties assigned Project Engineer Qualifications: • Degree in Engineering or Construction Management., • Demonstrated expertise (either through internships or work experience) in commercial projects (i.e. tenant improvements, multi-family and multi-use, corporate and institutional structures), • Excellent communications skills required for interaction with vendors, designers, consultants, and clients., • MS Office (Word, Excel, Project) AutoCAD, Revit, Blue Beam, • Minimum of 5 years of experience in construction project management, • Strong knowledge of construction materials, methods, and regulations, • Excellent communication and leadership skills, • Ability to manage multiple projects simultaneously, • Proficiency in project management software and tools, • Professional Engineer (PE) license preferred, • Experience in managing large-scale construction projects, • Ability to read and interpret blueprints and construction plans, • Knowledge of budgeting and financial management, • Experience in managing and supervising construction teams, • Strong problem-solving and decision-making skills, • Time management skills and organizational skills, • Ability to maintain discretion and confidentiality at all times Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit ergonomically correctly; use hands to finger, handle or feel, ability to talk and/or hear. The employee is required to stand; walk; reach with hands and arms; climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 30 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to focus. Repetitive motion with word processing and data entry. Heavy phone use. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outdoor weather conditions. The employee is occasionally exposed to work near moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate Company DescriptionImperial Contracting is a 25 year Phoenix-based general contractor providing professional construction repair and renovation services for the multi-family housing industry in the western United States. It completes over 100 projects per year and is planning to double its revenue this year. It takes pride in a professional and personal commitment to the successful completion of every project. Imperial understands the unique features associated with the renovation of multi-family housing and is fully aware that its success is rooted in the customer trust generated by our performance on all projects. The future of the company depends on a firm commitment to that performance and on the professionalism of its employees.Imperial Contracting is a 25 year Phoenix-based general contractor providing professional construction repair and renovation services for the multi-family housing industry in the western United States. It completes over 100 projects per year and is planning to double its revenue this year.\r\nIt takes pride in a professional and personal commitment to the successful completion of every project. Imperial understands the unique features associated with the renovation of multi-family housing and is fully aware that its success is rooted in the customer trust generated by our performance on all projects. The future of the company depends on a firm commitment to that performance and on the professionalism of its employees.

Job Description Methods Machine Tools, Inc. supplies high-quality, high-precision machine tools and automation solutions, and designs integrated custom machining processes and systems. Headquartered in Sudbury, Mass., and in operation since 1958, Methods provides an end-to-end portfolio of best-in-class products, engineering, service, parts, training, and integration. Methods has more than 300 employees, seven technology centers, one high precision machining center, and has installed in excess of 45,000 machines throughout North America. We currently have the following career opportunity based in Arizona with frequent travel to the following states: CO, UT, NV, NM, ID, WY and MT. Job Summary: We are looking for an experienced Service Engineer to perform the installation, maintenance, troubleshooting, and repair of CNC machines at customer sites. This advanced role requires in-depth technical expertise in CNC machinery, the ability to diagnose complex issues. The position involves frequent travel and direct interaction with customers to ensure optimal machine performance and customer satisfaction. Duties/Responsibilities: • Troubleshooting & Repairs: Diagnose and resolve complex mechanical, electrical, pneumatic, hydraulic, and software-related CNC machine issues., • Installation & Commissioning: Installation and setup of CNC machines, ensuring proper calibration, alignment, and integration with production systems., • Preventative Maintenance: Develop and implement preventive maintenance programs to enhance machine reliability and longevity., • Documentation & Reporting: Maintain detailed service logs, diagnostic reports, and repair documentation. Provide feedback to engineering and product development teams., • Emergency & On-Site Support: Provide rapid response to urgent service calls and critical failures, ensuring minimal downtime for customers., • Knowledge of CNC machine operations, strong ability to read electrical schematics, mechanical systems, and control systems., • Knowledge of automatic tool changers and pallet systems, • Understanding of servo motors, drives, PLCs, and automation systems., • Ballscrew & axis support bearing replacement & alignment, • Excellent verbal and written communication skills to interact with customers, document service activities., • Applicant should have a minimum of 5 years of experience in CNC field service and knowledge of Fanuc controls. CNC programming experience is a plus., • 8-10 years of experience in CNC machine service, repair, and troubleshooting, with expertise in complex diagnostics., • Strong electrical background., • Understanding of prints / schematics and electrical drawings., • Ability to lift up to 50 lbs., • Perform physical tasks such as bending, twisting, and crawling., • Climb step ladders up to 8 feet., • Drive daily to customer locations, with dependable transportation and a clean driving record required. #ZR

Job Description Hazen and Sawyer is seeking a Senior Wastewater Project Engineer/Manager for our Arizona offices located in Tempe, Tucson, and Goodyear. As part of our design and process teams, you will be involved with a wide range of wastewater infrastructure projects. This will encompass all phases of design, including conceptual/feasibility evaluations, project management, preparation of design reports, permitting, development of construction drawings and specifications, and support of construction services. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Developing technical treatment strategies, selecting treatment processes, developing process design criteria, and delivering projects., • Direct coordination and collaboration with clients., • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Evaluate progress of the project staff and results obtained and recommend changes to achieve overall project objective, • Planning, design, permitting, and construction of wastewater-related projects., • Experience managing interdisciplinary teams to effectively meet the client’s needs, • Task responsibilities will include project management, preparation of assessment and design reports, performing design calculations, equipment sizing/selection, preparation of construction documents, and support needs for construction management/commissioning., • Fieldwork and site visits from planning through construction may be required with occasional travel., • Candidate shall also be able to lead business development activities including preparation of proposals and presentations., • The position will lead to an increasing level of client development and management commensurate with experience, supported by our local office and firm-wide technical resources, • Bachelor's degree in civil/environmental engineering, • PE license, • 12+ years of experience in the field of wastewater-related infrastructure, including project management (planning, design, and construction), • Experience in successfully delivering projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Advanced degree (Master’s or Doctorate) in Civil/Environmental Engineering, • Experience managing projects with fees of $2M or more, • Experience negotiating multiple contracts with clients, • Experience recruiting staff, • Engagement in professional society leadership roles, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Hi, we're Oscar. We're hiring a Senior Software Engineer, Cloud Infrastructure / SRE to join our Engineering team. Oscar is the first health insurance company built around a full stack technology platform and a relentless focus on serving our members. We started Oscar in 2012 to create the kind of health insurance company we would want for ourselves—one that behaves like a doctor in the family. About the role: Our Core Technology teams build and maintain the foundational platform upon which all Oscar engineering is built. We are responsible for architecting a world-class, resilient ecosystem using a modern stack centered on AWS/GCP, Terraform, and Kubernetes with developer focused tooling and CI/CD. Our mission is to provide an automated, self-service infrastructure that empowers our engineering organization to move fast without sacrificing security or stability. You will report into a Staff/Senior Staff Engineer. Work Location: This position is based in our Tempe office, requiring a hybrid work schedule with 3 days of in-office work per week. Thursdays are a required in-office day for team meetings and events, while your other two office days are flexible to suit your schedule. #LI-Hybrid Pay Transparency: The base pay for this role is: $180,504 - $236,911 per year. You are also eligible for employee benefits, participation in Oscar's unlimited vacation program, company equity grants, and annual performance bonuses. Responsibilities: • Become the expert on your team's business and technical domains such as DevOps, site reliability, and cloud best practices, • Lead the planning, execution and release of complex technical projects across multiple teams outside of Core Technology, • Work with partners, product managers, and designers to solve challenging problems, • Lead and mentor engineers on the team to improve technology and apply best practices, • Independently responsible for large or complex technology capabilities (set of components or services) within their team's domain or spanning multiple domains, • Facilitates, encourages, and enhances cross-team execution and collaboration; knows when cross-team projects are at risk and actively mitigates risk to deliver on time, • Prolific contributor to the objectives of their functional group, as well as organization-wide projects, • Drives prioritization of technical roadmap and influences prioritization of product roadmap and process enhancements within their team, • Actively identifies and reduces failure domains, designs and builds resilient systems, and strives to reduce adverse effects of an outage., • Builds software to minimize effort and business impact during maintenance and failures, • Guides the development of Service-Level Objectives (SLOs) for systems they are responsible for, • Own medium to large features or infrastructure projects from technical design through completion, • Compliance with all applicable laws and regulations, • 6+ years of professional software engineering experience, working with a variety of technologies, and have increasingly impactful accomplishments, • Experience as a major contributor cross-pod or cross-company deliverables, • Experience leading technical contributions, improving the quality of what your teams create, and are excited to build fault-tolerant, and scalable software systems., • Demonstrates expertise of the practical application of CS concepts within their team., • Sets and enforces the standard for writing stable, correct, and maintainable code, • Cloud Proficiency: Deep expertise in managing production environments within AWS or GCP at scale., • Infrastructure as Code: Advanced experience with Terraform or similar IaC tools to manage complex, multi-account structures., • Orchestration & Delivery: Proven track record with Kubernetes and workflows using ArgoCD., • SRE Discipline: Strong background in Site Reliability Engineering, including Service Level Objectives (SLOs), error budgets, and incident management., • CI/CD & Automation: Experience building robust deployment pipelines via GitHub Actions., • Observability: Proficiency with monitoring using tools like Prometheus, Grafana, or similar., • Security & Networking: Knowledge of cloud-native security (IAM, VPC peering) and service mesh technologies like Istio., • Programming: Understanding of at least one coding language that you are able to use to develop scripts and software At Oscar, being an Equal Opportunity Employer means more than upholding discrimination-free hiring practices. It means that we cultivate an environment where people can be their most authentic selves and find both belonging and support. We're on a mission to change health care -- an experience made whole by our unique backgrounds and perspectives. Pay Transparency: Final offer amounts, within the base pay set forth above, are determined by factors including your relevant skills, education, and experience. Full-time employees are eligible for benefits including: medical, dental, and vision benefits, 11 paid holidays, paid sick time, paid parental leave, 401(k) plan participation, life and disability insurance, and paid wellness time and reimbursements. Artificial Intelligence (AI): Our AI Guidelines outline the acceptable use of artificial intelligence for candidates and detail how we use AI to support our recruiting efforts. Reasonable Accommodation: Oscar applicants are considered solely based on their qualifications, without regard to applicant's disability or need for accommodation. Any Oscar applicant who requires reasonable accommodations during the application process should contact the Oscar Benefits Team () to make the need for an accommodation known. California Residents: For information about our collection, use, and disclosure of applicants' personal information as well as applicants' rights over their personal information, please see our Privacy Policy.

Job DescriptionOverview We are seeking a talented and innovative Design Engineer III to join our dynamic team in Mesa, AZ. In this role, you will leverage your engineering expertise to lead, design and complex electrical systems that interface with military platforms including aircraft. If you're passionate about engineering and eager to work in a collaborative environment, we want to hear from you! Responsibilities • Design, develop, and test electrical systems consisting of CCAs, printed circuit boards and/or firmware., • Architect, design, develop, debug, deploy, and maintain electrical and electronic hardware for new and existing ICE products., • Determine and document hardware and data input/output and system requirements., • Design, develop, test, modify, install, and update embedded software and firmware., • Evaluate system and software designs, equipment, and techniques and make recommendations for design improvements., • Participate in design reviews and provide constructive feedback to peers., • Stay updated on industry trends and advancements to incorporate innovative solutions into designs., • Support the documentation process, including specifications, test plans, and reports., • Occasional travel may be required. Qualifications, • Bachelor's degree in Engineering strongly preferred., • 6+ years experience in electrical/computer engineering; or, • Associates degree and 9+ years electronic design experience may substitute Bachelor's degree., • Knowledge of digital communication hardware and protocols (UART, SPI, I2C, IrDA, USB, WiFi, RFID, TCP/IP, RS-485, MIL-STD-1553, etc.) required., • Extensive experience with Altium Designer required., • Strong background in CCA hardware and PWB development required., • Must be able to work independently and in multi-disciplinary teams and to organize and prioritize tasks and activities., • Encryption hardware experience a plus., • Ability to obtain Security Clearance is required.

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200+ personnel specializing in water and wastewater engineering and construction management services. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced {Job Title} to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote.) Essential Duties and Responsibilities • Proficient in the design of low and medium voltage power distribution systems including single-line diagrams, panel schedules, power plans, lighting plans, control schematics, conduit block diagrams, and installation details, • Proficient in completing electrical engineering calculations, including circuit load summaries, circuit breaker sizing, conduit and wire sizing, voltage drop, and fault current, • Proficient with Microsoft Office suite and working knowledge of AutoCAD software, • Thorough understanding of the NFPA 70 National Electrical Code and NFPA 70E, • Strong ability to work independently and efficiently on small to medium electrical and control system design projects, and in a team environment with other engineers and designers, • Ability to read and understand P&IDs and control descriptions a plus, • Experience in construction shop drawing review, request for information (RFI), field inspection, start-up and commissioning, • Experience leading, reviewing and interpreting power system studies, arc flash studies, • Experience modeling electrical power distribution systems with SKM software a plus, • Thorough knowledge of NFPA 101 and NFPA 820, • Excellent written and verbal communication skills, • Minimum of three (3) years electrical and industrial controls engineering experience in Water/Wastewater industry, • Minimum of three (3) years of experience producing Electrical, Instrumentation, and Controls (EI&C) Contract Drawing packages in AutoCAD Requirements • Undergraduate degree in electrical engineering from accredited university or college required, • A Professional Engineer (P.E.) license is required – preferably in Arizona BenefitsThe comprehensive benefits plan offered by Wilson Engineers exceeds industry standards, and is aimed at meeting each employee's personal and professional expectations. Benefits include personal time off, paid holidays, medical, dental and vision coverage; plus a flexible spending plan and short and long-term disability. Wilson Engineers also helps in securing your financial future by offering 401k plans with employer matching.Benefits plan offered to our full-time employees: • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job Description Qualifications: Here's what you'll need: • Two-year technical degree or four-year non-technical degree, • At least 5 years of relevant experience in telecommunications design and construction industry, • Knowledge & application of telecommunications industry association (TIA) standards, • Knowledge & application of BICSI (Building Industry Consulting Services International) design practices, • Knowledge & application of NFPA 70 (NEC) and electrical design requirements, • Experience leading a telecommunications design team, • Experience editing design and construction specifications, • Experience with start-up and commissioning of telecommunications systems, • Experience estimating and scheduling design efforts for large multi-building projects with multiple phases and design packages, • Strong structured cabling design background, • Proficiency with Bluebeam, • Strong communication skills, • Bachelor's degree, • Professional Engineer (PE) license, • BICSI (Building Industry Consulting Services International) RCDD (Registered Communications Distribution Designer) credential, • Project management experience, • Working knowledge of Revit and Navisworks design software platforms, • At least 4 years of telecommunications design experience in semiconductor industry, • Knowledge and design experience with emergency responder radio and distributed antenna (DAS) systems, • BICSI OSP (Outside Plant) We are looking for a Telecommunications Systems Engineer who is excited about working on projects that enable the heart of our clients' business. This position will provide opportunities to lead portions of very large and complex projects as a telecom scope owner working in conjunction with other telecom design professionals and supporting design staff while collectively producing challenging design packages. This is done in coordination with architects and other discipline engineers / design leads all on one design team. You will interface directly with our client counterparts to design these facilities to meet their needs. Our teams leverage AutoCAD, SmartPlant, and Revit MEP design software to create fully coordinated 3D models across all disciplines (C, S, A, M, E, P, T, I, L). Through a mixture of full 3D BIM delivery, construction specifications, and 2D sheets, you will help lead the design of everything from Outside Plant (OSP) to inter/intra-building backbone distribution systems, communication room layouts, rack elevations, wired & wireless device plans, and cable schedules. All facets of the designs and calculations will be completed in accordance with the NEC, applicable TIA and other industry standards as well as Client specifications as applicable.

Job Description Qualifications: Post Job As: Life Safety Systems Engineer Job Qualifications Bachelors Degree in Engineering with the ability to attain PE licensure At least 4 years of AutoCAD design experience Knowledge of IFC, IBC, NFPA101 Life Safety Code and NFPA 72 Fire Alarm and Signaling Code Knowledge and application of NFPA 70 (NEC) and electrical design requirements Knowledge and application of NFPA 400 Hazardous Materials Code Knowledge of Fire Alarm Systems and manufacturers equipment, including VESDA systems Design experience with Fire Alarm, VESDA systems, security CCTV, HPM and Leak Detection Knowledge of design and construction specifications Experience estimating and scheduling mid-to-large-scale projects Ideally, youll also have: Professional Engineering (PE) license Experience leading projects and managing resources Experience mentoring junior staff Design Management experience Design experience in semiconductor or data centers Working knowledge of 3D BIM software (Revit) Responsibilities: Post Job As: Life Safety Systems Engineer Job Description Were looking for a Fire Protection / Life Safety Systems (LSS) Engineer who is excited about working on projects that enable the heart of our clients business. The ideal candidate will be located in AZ, OR, TX or PA, however, qualified candidates located elsewhere in the U.S will also be considered. As a LSS Engineer working with our teams, youll use your skills and experience to help our clients, by providing code- compliant asset protection and fire life safety mitigation solutions. You will be expected to both provide guidance to co- workers and receive solutions from variance senior design professionals so that you can take ownership of various projects as the engineer of record. These fire solutions entail fire sprinklers, gaseous agents, fire detection, toxic gas detection, smoke modeling, and explosion prevention. You will interface directly with client counterparts in the designing of their facilities and state and local code officials. Utilizing AutoCAD and Revit MEP, our teams create 3D models in coordination with architects and engineers. From those 3D BIM models youll design fire sprinkler systems, fire alarm systems, smoke and leak detection, security and intrusion detection systems, and more. Using the various applicable Life Safety & Fire codes as well as industry standards you will provide calculations; equipment size and quantities; equipment and construction specifications; network diagrams and various construction deliverables in both 2D and 3D platforms for a constructible design.

Job Description Summary Our client is a leading and established IT Solutions Firm in the Scottsdale, AZ area that is seeking a professional senior system engineer (IT Engineer) to join their team. This position will consult, design, and implement IT advanced solutions. This position will also troubleshoot complex problems and mentor junior team members while being on a specific track towards CIO level consultancy. As an IT organization, they work on the latest technology from the top IT solution manufacturers and bring those technologies to solve their clients challenges and help them find strategic direction. If you are seeking to advance your career in a big way, then this just might be the opportunity that you've been seeking. Duties & Responsibilities • Implementing, Monitoring, and Troubleshooting Microsoft Cloud with various customers, • Various System Administration duties, • Project Management, • System Design, • Working with technology vendors, • Consulting and deployment of server and network solutions., • Client Strategical Plan Development, • Advanced diagnostic and remediation of server and network solutions., • Write clear and concise documentation and instructions., • Ability to manage and prioritize multiple tasks in fast paced environment., • Participate in on-call rotation., • Extensive knowledge of Active Directory and Windows Server Technologies (Windows Server, Exchange, RDS, SQL, IIS ...), • Experience with cloud technologies (Azure, O365, AWS, Google, G-Suite ...), • Confident with diagnostic, repair and installation of server and network systems., • In-depth working knowledge of virtualization including VMWare, Nutanix, SANS and clustering., • Knowledge of networking technologies including TCP/IP, VLANS, routing, switches, firewalls, DNS, VPN, and VoIP. (Cisco, Fortinet, Sonicwall), • Knowledge of RMM technologies, commonly used in MSP environments, such as NinjaONE, Kaseya, or Connectwise, • Experience working with PSA Ticketing Software Solutions, such as Autotask or Connectwise., • Working knowledge of security policies and NIST controls., • Mastery and certified in one or more of the following:, • Microsoft Servers, Fortinet, Cisco, VMWare, Nutanix, Windows Server, Storage Networking, • Education: Bachelors degree required, • Experience: 5+ Years systems design, administration, installation, and troubleshooting, • Preferred Certifications:, • MCSA Server or MCSE, • Cisco, • Fortinet, • VMWare, • NutanixEmployment Type: Full time Location: Scottsdale, AZ

Job Description Company Description: Meade is a leading engineering firm that specializes in providing innovative and cost-effective solutions for data center builders, cloud providers, and developers of large construction projects. With years of experience, our team of expert engineers, designers, and consultants is dedicated to delivering high-quality, reliable, and sustainable solutions that meet your specific needs. At Meade, we take pride in our commitment to excellence, efficiency, and superior service. We strive to build long-lasting relationships by understanding your unique requirements and delivering customized solutions that exceed your expectations. Our website: Job Description: Meade is seeking a skilled and experienced Fire Protection Engineer III to join our design team. The Fire Protection Engineer III will be responsible for the design, development, and implementation of comprehensive fire protection systems for data centers. This role requires a highly experienced engineer with a deep understanding of fire protection engineering principles, code requirements, and industry best practices. The ideal candidate will have a proven track record in designing fire protection systems and a Professional Engineering (PE) license. This role can be based in Austin, TX, Phoenix, AZ, Atlanta, GA, Reno, NV, Grand Rapids, MI, or Las Vegas, NV. This position may require travel to all of the above listed locations. Job Duties: • Lead the design and engineering of fire protection systems, including fire detection, suppression, and alarm systems, tailored to the unique needs of data centers., • Develop detailed engineering plans, specifications, and cost estimates for fire protection systems., • Ensure designs comply with all relevant codes, standards, and regulations, including NFPA, ICC, and local building codes., • Manage and oversee fire protection engineering projects from concept through completion, ensuring timely delivery and adherence to budget., • Coordinate with other engineering disciplines, architects, and construction teams to integrate fire protection systems seamlessly into overall data center designs., • Conduct site visits and inspections to ensure proper installation and operation of fire protection systems., • Provide technical guidance and mentorship to junior engineers and other team members., • Stay current with advancements in fire protection technology and industry trends., • Conduct risk assessments and fire safety evaluations for data center facilities., • Prepare and review technical reports, design documentation, and regulatory submissions., • 4+ years of professional design experience in fire protection system design., • Bachelor's degree in Mechanical Engineering or a related field., • Valid Professional Engineer (PE) license preferred (will consider Engineer in Training certification)., • Strong knowledge of fire protection codes, standards, and regulations (e.g., NFPA, ICC)., • Ability to work independently and manage priorities effectively., • Proven project management experience, with the ability to lead projects and teams effectively., • Excellent communication and interpersonal skills, with the ability to work collaboratively with cross-functional teams., • Proficiency in fire protection engineering software and tools., • Self-motivated, comfortable with ambiguity and motivated to work as a team and lead others., • Top-notch organization, attention to detail combined with excellent written and oral communication skills. All full-time employees receive a comprehensive benefit package that includes, but is not limited to, medical, dental, and vision insurance with 100% of medical premiums covered by the employer, short and long-term disability insurance, life insurance, a profit-sharing plan, vacation time, paid holidays off, and a target yearly performance-based bonus of 10% of your annual base salary. Meade is an Equal Employment Opportunity employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status

Job Description Primarily responsible for analyzing blueprints, specifications, proposals, and other documentation to prepare quotes of products (Grilles, Registers & Diffusers, GRD’s, Fans) and all other equipment for projects. $58,500 - 75,000 annually, DOE. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Reading and understanding of Mechanical blueprints and specifications for takeoffs, • Preparing job proposals, • Project Management and coordination of room schedules with customers, • Knowledgeable of all aspects of mechanical systems with ability to select proper system components as established by project engineer, • Communicate with vendors regarding product and shipping schedules, • Provide high quality product submittals for customer review, • Ability to handle multiple tasks and projects effectively EDUCATION and/or EXPERIENCE: • Ideal candidate has experience in HVAC equipment design, ductwork design and an understanding of all HVAC related products., • Previous estimating experience preferred but not necessary., • High School diploma or GED required., • Bachelor’s degree in Mechanical Engineering or similar field preferred., • Effective communication with internal and external customers., • Ability to read and understand specifications and blueprints., • Strong math aptitude and analytical skills., • Strong working knowledge of PC environment and MS Office programs including Outlook, Word and Excel., • Must be customer oriented and motivated with excellent oral and written communication skills., • Strong organizational skills and an ability to prioritize and manage multiple tasks under time constraints and strict deadlines. MATHEMATICAL SKILLS: Ability to verify and calculate figures such as cost/sale and/or margins. Ability to perform basic mathematical calculations required to accurately complete assigned tasks. COMPUTER SKILLS: To perform this job successfully, an individual should have intermediate level knowledge of Word Processing software and Spreadsheet software. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, or schedule form. Ability to use sound judgment and problem-solving skills to analyze customer problems and to recommend the proper course of action. Ability to organize and prioritize job projects and requirements. ATTENDANCE DEMANDS: The attendance demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Attendance is required Monday through Friday 8:00 A.M. to 5:00 P.M. or within normal business hours as established by the supervisor. The employee may be required to travel to different locations. Employee may be required to work overtime. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands, handle, or feel; and required to speak, read, and hear English. The employee frequently is required to reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include ability to adjust focus. Employee is required to travel to customer locations. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The noise level in the work environment is usually moderate., • This position may occasionally be exposed to extreme weather conditions in a warehouse environment at company branches, vendor locations, or customer sites. Hercules Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regards to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, status as a qualified individual with disability, or other legally protected status. Comprehensive benefits are an important component of an employee's compensation package. Hercules recognizes the contribution of every team member and therefore is pleased to offer a competitive and cost-effective benefits package to support your needs and long-term goals. Hercules Industries offers the following insurance: medical, dental, vision, Short Term Disability, Long Term Disability, and Employee Life Insurance (Basic Life/AD&D and Voluntary Life AD&D). We pay Holiday, vacation, and sick time; as well as a Flexible Spending Plan, Wellness Program, and Employee Assistance Program (EAP). We offer a 401(k) Savings Plan and an Employee Stock Ownership Plan (ESOP). Effective October 1, 2019, Hercules became an employee-owned company. An ESOP is a qualified retirement plan. Hercules encourages and supports participation in service activities that contribute to our community. Employees are permitted to take three paid hours of work time per month to participate in an approved community service activity. The company offers a quarterly Hercules Employee-Owner Partners in Profit Bonus based on eligibility. #ZR

Job Description Project Engineer Job Description We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing of technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project. You should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills. Project Engineer Responsibilities: • Preparing, scheduling, coordinating, and monitoring assigned engineering projects. methods and maintain the project's profitability. • Reviewing the engineering tasks and initiating the necessary corrective actions., • Developing specifications for the project's needed equipment., • Creating frameworks to measure the project's metrics and data collection., • Establishing field test methods and methods for monitoring the quality of those tests. Project Engineer Requirements: • A bachelor's degree in Construction Management or a related field., • 2 or more years of field and project planning experience., • Excellent computer literacy and knowledge of design and visualization software., • The ability to work with multiple discipline projects., • Excellent organizational, time management, leadership, and decision-making skills., • Strong written and verbal communication skills., • Knowledge of applicable codes, policies, standards, and best practices.

Job DescriptionBridgers & Paxton engineers spectacular, award-winning spaces. We’ve engineered everything from state-of-the-art film production studios to cleanrooms for advanced manufacturing. We believe in engineering environments that bring a building to life. We are not your average engineering firm. We strive to utilize systems that are cost-effective, sustainable and easily managed after construction. We truly enjoy the process of working together to find the best approach for each project. We have an exciting opportunity for an experienced Electrical Engineer to join our team in our Phoenix office. The qualified applicant will be able to demonstrate an established career in Electrical Engineering related to projects such as laboratories, hospitals, manufacturing, educational, and commercial facilities. In this position, the ideal candidate performs conceptual design through construction administration and post-occupancy, coordinating with multiple disciplines and as electrical engineer, ensuring projects are delivered within budget and on schedule. Other responsibilities of this position include: • Staying current on codes and technologies appropriate to the electrical disciplines, • Ensuring conformance with standards, established design practices, applicable codes, and technical adequacy of design and construction, • Organizing and conducting site visits for data collection and evaluation of electrical systems, equipment, components and materials for projects with and without well-defined scopes, • Developing and designing within a BIM design environment, • Completing assigned engineering and design tasks in accordance with client specified criteria and applicable codes and standards, • Reviewing junior team member’s work for quality and recognition of training opportunities, • Leading junior engineers in engineering design development and professional growth, • Collaborating with the internal and external project team to execute the project from concept to completion.Bridgers & Paxton is one of the top 100 Mechanical, Electrical, Plumbing and Technology Consulting Engineering firms in the nation with a reputation for superb design services. Our clientele includes federal, state, and city agencies, colleges and universities, manufacturing and healthcare. We employ over 130 people, of which 55 are graduate engineers with 12 of those registered Engineer Interns and 37 registered Professional Engineers. This high ratio of engineers allows B&P to take on some of the most technically challenging projects and provides opportunity to have a successful and fulfilling career. With us, you can experience a wide variety of project types from Department of Energy laboratories to hospitals, manufacturing, educational, and commercial facilities. We expect our experienced engineers to be able to lead and deliver projects, taking a leadership role in mentoring and developing staff. We look for the following ideal qualifications: • Four-year college degree from an accredited engineering program, • At least five years of electrical engineering experience within a consulting or design-build firm, • Professional Licensed Electrical Engineer preferred, • Experience with AutoCAD, Revit, SKM PTW and/or other design related software, • Experience in the following markets: Federal, state and Local Government, Healthcare and Labs, Corporate Commercial, and Educational facilitiesWe offer competitive salaries, excellent benefits package, we pay 100% of employee health coverage and partial coverage for families, full vested retirement plan with company match, vision, dental, and cafeteria plan. Our offices are located in three of the most beautiful and exciting cities in the West -- Albuquerque, NM, Mesa, AZ and Colorado Springs, CO. To be considered for this role, please apply via the link and attach your resume and cover letter. B&P is an Equal Opportunity Employer Powered by JazzHR KXOkvZMZTm

Job Description The Industrial Engineering Intern provides support and technical expertise to the Engineering and Operations Team for efficient production, ergonomics, health and safety. The Industrial Engineer Intern continually improves processes, tools and layouts to ensure efficient production The primary focus of this internship will focus on the re-layout and organization of the production facility. Essential Duties and Responsibilities: Engineering • Initiates, champions, leads and implements process improvement projects, • Prepares layouts of plant facilities to optimize utilization and product flow., • Implements lean principles and methods in production, including 5S., • Recommends workspace layout changes and improvements to maximize efficient production., • Organizes/prioritizes resources and leads cross-functional teams to execute equipment, facility development and production line improvement projects, • Communicates project scopes, progress and closeouts to key stakeholders to create awareness and generate support, • Collaborates with engineering and operations to support potential improvement opportunities focused on improving product quality, efficient production and safe work environment, • Currently enrolled in a Bachelor's degree program with a focus on Industrial Engineering, • Proficiency w/ tools such as 5S and Value Stream Mapping, • Strong mechanical aptitude and problem solving skills, • Experience with Lean Manufacturing and/or Six Sigma, strongly preferred, • Excellent MS Office skills, particularly Excel., • AutoCAD or similar CAD software experience, • Strong project management skills, • Excellent written and verbal communication skills

Job DescriptionCompany Description As a Staff Test Engineer, you will exhibit a wide range of experience, using in depth professional knowledge, acumen and concepts to develop and resolve complex issues and procedures. You will provide solutions to issues in creative and effective ways and direct the application of existing principles and guide developments of new policies and ideas. An understanding of the interaction of different disciplines will be fundamental to this position. This position will understand and work on complex issues where analysis of data requires an in-depth evaluation of varying factors. You will determine methods and procedures for new assignments, and exercise judgement in selecting techniques and criteria for the obtaining of results. Work is completed in this role with the expectation of meeting departmental objectives. You will network with key contacts outside of your own area of expertise and adapt accordingly to deliver messages that relate to the wider business. You will frequently be called on to advise others on complex matters and may be accountable for the timely delivery of tactical business objectives. Job Description · Bachelor’s degree or greater in Electrical/Computer engineering or Computer science. · 6+ years of experience working with Automated Test Systems (ATE); Microflex & Advantest 93K preferred. ETS364/800 a plus. · 6+ years of hands-on experience in ATE test development for analog, digital and mixed signal. · Experience in programming such as C++, basic, Perl, python, etc. · Experience in testing and collecting data on IC chips or circuits using standard tools such as Oscilloscopes, Multimeters, Spectrum Analyzers, etc. · Proficient with ATE analog digital instruments, PCB layout parasitic reduction, and strong debug/troubleshooting experience · Hands-on experience in debugging analog products with serial bus interfaces · Experience with test hardware and test program development · Travel 0-10% Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose ‘To Make Our Lives Easier.’ As the industry’s leading expert in embedded processing with unmatched quality and system-level know-how, we have evolved to provide scalable and comprehensive semiconductor solutions for automotive, industrial, infrastructure, and IoT industries based on the broadest product portfolio, including High Performance Computing, Embedded Processing, Analog & Connectivity, and Power. With a diverse team of over 22,000 professionals in more than 30 countries, we continue to expand our boundaries to offer enhanced user experiences through digitalization and usher into a new era of innovation. We design and develop sustainable, power-efficient solutions today that help people and communities thrive tomorrow, ‘To Make Our Lives Easier.’ At Renesas, you can: • Launch and advance your career in technical and business roles across four Product Groups and various corporate functions. You will have the opportunities to explore our hardware and software capabilities and try new things., • Make a real impact by developing innovative products and solutions to meet our global customers' evolving needs and help make people’s lives easier, safe and secure. Join Renesas. Shape Your Future with Us. Renesas Electronics is an equal opportunity and affirmative action employer, committed to celebrating diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by federal, state or local law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas. We have adopted a hybrid model that gives employees the ability to work remotely two days a week while ensuring that we come together as a team in the office the rest of the time. The designated in-office days are Tuesday through Thursday for innovation, collaboration and continuous learning.

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 210 personnel specializing in water and wastewater engineering and construction management services. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking a Structural Design Engineer to design Water/Wastewater Structures to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote nor hybrid.) Key Responsibilities • Perform detailed structural design, analysis, engineering calculations, and assist in the development of construction drawings and specifications for Water/Wastewater projects, • Conduct structural investigations and assist in the preparation of reports and cost estimates, • Perform routine engineering assignments requiring application of standard techniques and procedures, • Complete projects with clear, specified objectives and limited variables, • Work independently on small projects or assist senior engineers on larger projects, • Bachelors or Masters degree in Civil or Architectural Engineering with Structural emphasis, • EIT certification or ability to obtain, • Microsoft Office, Mathcad, TEDDS or similar analytical software experience, • SAP2000, STAAD or similar Finite Element software analysis experience, • AutoCAD, Revit or similar detailing and drawing production experience, • Ability to work in a team environment with the work involving studies, detailed design and engineering services during construction for a wide variety of projects, • Possess analytical and organizational skills to support multiple projects at a time, • Ability to learn, listen, adapt, and take ownership of work, • Attention to detail, self-directed learning, and meeting deadlines, • Strong verbal and written communication skills and the ability to coordinate work with other disciplines and production staff, • Willingness to try new things and be forward thinking, with a creative and innovative approach to engineeringPreferred Qualifications, • Master's degree in Civil or Architectural Engineering with Structural emphasis, • Previous structural design experience (internship or full-time work), • PE certification with structural engineering design experience, • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job Description Senior Software Engineer (AI / Linux Systems) About the Role We’re looking for a Senior Software Engineer to help build and scale next-generation systems powering AI applications, real-time video processing, and high-performance Linux environments. This is a hands-on engineering role focused on systems-level development, where you’ll work across software, infrastructure, and networking to support advanced computing platforms. You’ll play a key role in developing reliable, scalable solutions used in AI-driven analytics, video streaming, and data-intensive applications. If you enjoy solving complex technical challenges and working close to the system level, this role offers strong impact and ownership. What You’ll Do AI & Platform Development • Build and integrate software systems supporting AI/ML workloads and real-time analytics, • Deploy and optimize machine learning models in production environments, • Develop and maintain Linux-based services, tools, and infrastructure, • Build automation for deployment, monitoring, and system configuration, • Design and optimize real-time video streaming pipelines, • Work with protocols such as RTSP, RTP, and UDP, • Integrate software across compute platforms, networking systems, and hardware, • Troubleshoot complex system-level issues across distributed environments, • Collaborate cross-functionally to ensure system performance and stability ✅ What We’re Looking For Core Skills • 4–10+ years of software engineering experience, • Strong programming skills in C++ or Python, • Experience building and deploying applications in Linux environments Systems Experience • Background working with one or more of the following:, • AI / machine learning systems, • Video streaming or media processing, • High-throughput data pipelines, • Networking or distributed systems ⭐ Nice to Have (Not Required) • Computer vision or object detection experience, • GPU computing or AI acceleration, • Embedded Linux or edge computing, • Real-time systems or robotics, • Distributed systems or high-performance computing Why This Role • Work on cutting-edge AI and real-time systems, • High-impact role with ownership across the stack, • Solve complex, large-scale engineering challenges, • Collaborate with a strong, technically driven team Ideal Candidate You’re a systems-minded engineer who enjoys working across software, infrastructure, and hardware. You’re comfortable in Linux environments, enjoy performance tuning, and like tackling complex integration challenges. Company DescriptionPutting people at the forefront is our priority at Technical Talent Group. Our recruiters are trained to prioritize understanding what candidates are looking for in a new role. Our initial conversation with candidates revolves around their needs, not a job description. The most common mistake made by recruiters is assuming they know a candidate’s preferences solely based on their resume. At Technical Talent Group, we invest time in getting to know you before matching you or your company with the perfect match.Putting people at the forefront is our priority at Technical Talent Group. Our recruiters are trained to prioritize understanding what candidates are looking for in a new role. Our initial conversation with candidates revolves around their needs, not a job description. The most common mistake made by recruiters is assuming they know a candidate’s preferences solely based on their resume. At Technical Talent Group, we invest time in getting to know you before matching you or your company with the perfect match.

Job Description Position: Steel Detailer / Draftsman Job Responsibilities * Produce structural steel and miscellaneous metal shop drawings, erection drawings, and details from contract documents and engineer-of-record drawings. * Develop accurate piece and assembly drawings for fabrication, including member sizes, connection details, weld symbols, bolt callouts, and material notes. * Create and maintain Bills of Material (BOM), bolt summaries, and fab/erection packages aligned with STLHD FAB shop standards. * Coordinate with the fabrication lead/foreman and project team to ensure drawings support production sequencing and delivery schedules. * Review drawings for constructability, clashes, missing information, and scope gaps, then proactively generate RFIs when needed. * Incorporate revisions and manage drawing version control to ensure the shop always builds from the latest approved set. * Support field teams with clarification sketches, as-builts, and updated details when site conditions require adjustments. * Collaborate with engineers, GCs, and other trades to resolve connection questions and maintain schedule momentum. * Maintain organized digital files and drawing logs, supporting consistent documentation and turnover. Required Qualifications * 3+ years experience in steel detailing/drafting for structural steel and/or miscellaneous metals. * Strong understanding of steel fabrication and erection practices, including connections, bolt grades, weld types, and tolerances. * Ability to read and interpret structural drawings, architectural plans, specifications, and RFI responses. * Proficient in detailing/drafting software (examples include Tekla, SDS2, AutoCAD, Advance Steel, or similar). * High attention to detail, strong organizational skills, and the ability to manage multiple drawing packages at once. * Strong communication skills, able to work independently while supporting team production goals. * Willingness to work overtime when needed to keep projects on schedule. Preferred Qualifications * Experience detailing both structural steel and misc metals (stairs, ladders, rails, embeds, frames, mezzanines, support steel). * Familiarity with AWS weld symbols and common AISC detailing standards. * Experience coordinating with shop production teams and supporting field fixes. * Basic understanding of CNC data, DXFs, or export workflows (a plus, not required). What Success Looks Like * Drawings are clear, buildable, and aligned with shop standards. * Minimal rework, fewer surprises in the field, and smooth flow from detailing to fabrication to erection. * Proactive communication when information is missing, unclear, or risky. Company DescriptionSTLHD Fab is a family driven start-up steel fabrication shop. We fabricate anything from fences to larger structural steel.STLHD Fab is a family driven start-up steel fabrication shop. We fabricate anything from fences to larger structural steel.

Job DescriptionSalary: Senior Project Engineer (PE-2) Drainage Engineering Location: Mesa, AZ Employment Type: Full-Time Position Overview At EPS Group, we dont just work on drainage projects; we solve complex challenges that protect communities, improve infrastructure, and create lasting impact. Our drainage team is a collaborative, forward-thinking group that values trust, ownership, and innovation. We work hard, support each other, and deliver high-quality solutions for our clients, while making time to recharge and enjoy the work we do. We are seeking a highly skilled Senior Technical Engineer to lead our Drainage and Flood Control efforts. In this role, you will serve as a technical subject matter expert, driving the design and analysis of complex stormwater management systems, flood mitigation infrastructure, and open-channel hydraulics. You will bridge the gap between high-level engineering analysis and practical design solutions, ensuring our projects not only meet regulatory standards but also protect communities and infrastructure from flood risks. This is an ideal position for a technical leader who thrives on solving difficult hydraulic problems and mentoring junior staff. Core Responsibilities Perform complex hydrologic and hydraulic analyses, including 1D and 2D stormwater modeling using software such as HEC-HMS, HEC-RAS (1D/2D), FLO-2D, or similar. Conduct floodplain mapping, delineation, and regulatory compliance reviews. Prepare and review technical drainage reports, CLOMR/LOMR submittals, and FEMA flood map revisions. Utilize ArcGIS/QGIS for data analysis, mapping, and modeling support. Design stormwater and drainage facility designs, such as channels, culverts detention basins, storm drain systems, and erosion protection. Prepare and review technical drainage reports, CLOMR/LOMR submittals, and FEMA flood map revisions. Oversee the technical quality of drainage deliverables, ensuring compliance with local municipal standards, state DOT requirements, and federal (FEMA/USACE) regulations. Coordinate directly with clients, regulatory agencies, and sub-consultants to resolve permitting issues and technical challenges. Conduct rigorous QA/QC reviews of calculations, models, and design drawings prepared by junior staff. Coordinate with project managers to support deliverables on schedule and within budget. Serve as a technical mentor to Engineer-in-Training (EIT) staff and junior engineers, providing guidance on modeling techniques and design best practices. Assist Project Manager in scope development, fee estimation, and proposal writing for drainage-focused pursuits. Qualifications Bachelors degree in civil engineering or related field. Masters degree in Hydraulics, Hydrology, or Water Resources and/or Certified Floodplain Manager designation preferred. Current Professional Engineer license in Arizona. 6+ years of progressive experience in drainage engineering, stormwater management, and flood control. Advanced proficiency in H&H modeling software such as HEC-HMS, HEC-RAS (1D/2D), FLO-2D, or similar. Strong working knowledge of ArcGIS/QGIS for watershed delineation and spatial analysis. Deep understanding of FEMA NFIP regulations, CLOMR/LOMR processes, and local stormwater design manuals. Ability to explain complex hydraulic concepts to non-technical stakeholders and clients clearly. Strong eye for grading constraints and constructability issues within drainage designs. Physical Requirements Required to stand, walk, and sit. The position may require a visit to project sites occasionally. The position requires a normal range of hearing. The employee must be able to lift 40 lbs. occasionally. Requires prolonged sitting with 15% of the time spent bending and reaching. Must have manual dexterity sufficient to operate a computer keyboard and calculator. Noise levels are consistent with a standard office environment. Perks & Benefits Health, life, 401(k), dental and vision insurance Short-term, long-term disability insurance and leave Paid holidays Paid Time Off Bereavement leave Quarterly bonus program and straight time overtime Hybrid work options and flexible schedule opportunities. EPS Group is not currently considering applicants that will require visa sponsorship to obtain employment authorization. EPS Group is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We offer a competitive salary and bonus program, a wide range of benefits including 401(k) with employer match, advancement potential, and the opportunity to become an integral part of a highly respected firm.

Job DescriptionJob Title: Controls Systems EngineerJob Description Join our team as a Controls Systems Engineer where you will work onsite at data centers, semiconductor facilities, life sciences environments, and various industry buildings. You will have the opportunity to grow your career while traveling and receiving per diem benefits. Responsibilities • Develop and implement PLC programming for automation projects., • Design and troubleshoot control systems to ensure optimal performance., • Collaborate with cross-functional teams to integrate HMI systems., • Conduct thorough testing and validation of automation systems., • Provide technical support and troubleshooting for existing systems.Essential Skills, • Proficiency in PLC programming and automation systems., • Strong understanding of control systems and HMI integration., • Exceptional troubleshooting and problem-solving skills.Additional Skills & Qualifications, • Hands-on experience with PPE gear. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tempe,AZ. Application Deadline This position is anticipated to close on Apr 6, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionDescriptionWilson Engineers is an Arizona-based firm with a staff of more than 200+ personnel specializing in water and wastewater engineering and construction management services. We are dedicated to delivering ethical, reliable, high quality services to our clients based on innovation, while sustaining a challenging and rewarding work environment for our greatest assets, our employees. We are seeking an experienced Water/Wastewater-Project Engineer to join our team. This position requires 40 hours per week in our Tempe office. (This job is not remote.) Essential Duties and Responsibilities • Experience working in Water and Wastewater field. Relevant experience shall include design of treatment facilities, collection systems, booster and pump stations, water, reclaimed water, and wastewater master plans., • Experience with construction-related engineering services with the ability to review Shop Drawings, RFIs, issuing Engineers Directives etc., • Computer experience with Microsoft Word, Excel, and Outlook software capabilities. Requirements • Civil Engineering Degree (Professional Engineer (PE) license preferred)., • Minimum of two (2) to eight (8) years of relevant experience in Water/Wastewater related design and experience with construction-related engineering services., • Ability to work in a team environment with the work involving studies, detailed design and engineering services during construction., • Ability to take technical direction from Project Managers or Principals and complete design tasks and elements. Ability to coordinate with multi-disciplinary engineering teams. #LI-DH1 BenefitsThe comprehensive benefits plan offered by Wilson Engineers exceeds industry standards, and is aimed at meeting each employee's personal and professional expectations. Benefits include personal time off, paid holidays, medical, dental and vision coverage; plus a flexible spending plan and short and long-term disability. Wilson Engineers also helps in securing your financial future by offering 401k plans with employer matching.Benefits plan offered to our full-time employees: • Medical Plan, • Vision Plan, • Dental Plan, • Group Life Insurance, • Short Term Disability, • Long Term Disability, • Voluntary Term Life Insurance, • Liberty Mutual Insurance, • Personal Time Off (PTO), • Paid Holidays, • 401(K) Retirement Plan, • Section 125 Flexible Benefits Plan, • Tuition Reimbursement, • Employee Referral Bonus

Job DescriptionInfomatics is hiring a Senior Data Engineer on a direct hire/FTE basis to lead design, development and implementation efforts on our client’s Enterprise Analytics platform which includes an MPP Enterprise Data Warehouse, cloud-based Data Lake and other Big Data technologies. Essential Duties and Responsibilities: • Guides the the strategic capabilities and architecture design related to Data Warehousing, Big Data and Data analytics in close collaboration with Technical Leadership., • Architects and develops code for large-scale ETL pipelines with data processing frameworks supporting distributed data warehouse and distributed analytic systems running in the cloud., • Leads side-by-side design sessions with our business experts and engineers to understand our product and business to design, socialize, and implement proper conceptual, logical and physical data models., • Spearheads efforts with multiple, disparate, data providers, as well as downstream consumers, to engineer efficient, tracable, and fault tolerant, batch and streaming, data pipelines to that support complex analytical analysis and enterprise-wide Business Intelligence applications, • In collaoration with our Data Science team, lead efforts to develop and implement production grade code/pipelines, in laguages including Python, leveraging advanced statistical routines, Machine Learning and other AI technologies., • Responsible for oversight and improvements on approaches to monitor and support data quality automation efforts. Working along side QA Engineering, implement quality check routines as part of data processing frameworks and validates flow of information., • Drives engineering efforts for Data Warehouse and Big Data infrastructure needs, including but not limited to, automation of system builds, security requirements, performance requirements and logging/monitoring in collaboration with DevOps engineers, • Resolves escalated issues related to complex data anomolies and performance. In addition, implements adjustments, conducts after action reviews to determine root cause/corrective measures, and ensures knowledge transfer to operations support team., • Provides mentorship and guidance to help guide and grow the technical depth of junior Data Engineers and across the BI & Analytics team., • Ensures documentation is complete and up to date with regard to standards, best practices and technical specifications., • Leads design and code review sessions and provides feedback and mentorship to peers., • Educates the BI & Analytics team on the latest industry technologies, trends and strategies; Provides thought leadership around approaches, patterns and best practices in the Data Engineering domain., • Assists employees, vendors or other customers by answering questions related to Data Warehousing and Big Data processes, procedures and services, • Collaborate with data team, product owners, Scrum-master to refine and estimate stories/epics to deliver on commitments on time and with high quality while providing exceptional customer service, • Provides Tier 3 support and create run books to mentor Tier 1 and Tier 2 support staff, • Other duties as assigned Background & Experience Required:, • This position requires a minimum of 10 years of progressive database development and integration experience., • Demonstrated experience in designing and implementing large-scale logical and physical data model with expert knowledge of Kimball methodologies., • Demonstrated advanced/expert level experience in multiple relational (RDMS) and non-relational (NoSQL) data platforms is required., • Demonstrated advanced experience in SQL tuning, indexing, distribution, partitioning, data access patterns and scaling strategies is required., • Demonstrated advanced scripting knowledge with Jupyter/Python or R is required., • Demonstrated expert experience with data integrations and data processing for business intelligence and analytics workloads is required., • Experience in software versioning tools including git, SVN or related., • Advanced experience with AWS S3 or other distributed object stores, MPP Data Warehousing, (e.g. AWS Redshift), Elastic MapReduce is needed., • Experience implementing statistical models, ML and other AI technologies into production data is required., • Experience developing container, • Demonstrated experience implamenting Big Data pipelines including Spark, Hive, Sqoop or related technologies., • Experience implementing streaming data pipelines to support realtime and near realtime decision making., • Understanding of Software Development Life Cycle (SDLC) methodologies such as Agile and Waterfall is needed., • Proven track record of designing data platforms leveraging large complex data sets. Educational Requirements:This position requires a Bachelors Degree in Computer Science, Computer Information Systems or related or equivalent experience.Data or cloud related certifications are a plus.

Job Description Position: Project Coordinator Reports To: Project Manager Department: Project Management FLSA Status: Exempt Position Value Proposition: The Project Coordinator assists in managing the flow of technical information between the Graywolf Project Management team, customers, and subcontractors and vendors, while developing critical relationships with internal and external clients, through verbal and written communication. Core Responsibilities: • Reviews design drawings and 3D BIM Models for accuracy and completeness, and coordinates resolution of discrepancies and/or missing information with customers, design team, other trades, detailing, shop, & field as may be necessary., • Coordinates project sequencing and basic detailing job setup including advance bills and shop and erection drawings., • Provides instructions and guidance to steel detailers in preparing models and shop drawings per project requirements and standards., • Monitors project schedules regarding submittals, approvals, and shop fabrication releases. Identify and communicate possible delays or problems to project management team., • Organize detailing RFI process through formal RFI to customer and informal RFI’s with the engineer, architect, and general contractor. Facilitates and fulfills other documentation efforts and duties and as may be required., • Distribute and route drawings. Work closely with Document Control to avoid delays and maintain logs., • Act as a liaison between shop, field, detailers and subcontractors to resolve fabrication and erection difficulties., • Communicate with Graywolf project team., • Provides assistance to the Project Management Team in achieving successful project results., • This position requires travel to design and coordination meetings, fabrication facilities and job sites., • Coordinates the detailing efforts of various common subcontractors., • Serve as a direct link between Detailers, Project Managers, and other production departments, and customer, other contractors, and Design Team as may be required., • Work closely with V.P. Project Management to assist with selection and training of incoming and current Project Coordinators and/or Project Coordinator Trainee’s ADDITIONAL DUTIES & RESPONSIBILITIES: (This job description is not an exclusive or exhaustive list of all job responsibilities and functions that an employee in this position may be asked to perform. Above statements describe the general nature and level of work being performed, .Duties and responsibilities can be changed, expanded, reduced or delegated by management to meet the business needs of the company) Required qualifications: Core Competencies: • Approachability - Is easy to approach and talk to; spends the extra effort to put others at ease; can be warm, pleasant, and gracious; is sensitive to and patient with the interpersonal anxieties of others; builds rapport well; is a good listener; is an early knower, getting informal and incomplete information in time to do something about it., • Conflict Management - Steps up to conflicts, seeing them as opportunities; reads situations quickly; good at focused listening; can hammer out tough agreements and settle disputes equitably; can find common ground and get cooperation with minimum noise., • Customer Focus - Is dedicated to meeting the expectations and requirements of internal and external customers; gets first-hand customer information and uses it for improvements in products and services; acts with customers in mind; establishes and maintains effective relationships with customers and gains their trust and respect., • Drive for Results - Can be counted on to exceed goals successfully; is constantly and consistently one of the top performers; very bottom-line oriented; steadfastly pushes self and others for results., • Functional Technical Skills - Has the functional and technical knowledge and skills to do the job at a high level of accomplishment., • Interpersonal Savvy - Relates well to all kinds of people—up, down, and sideways, inside and outside the organization; builds appropriate rapport; builds constructive and effective relationships; uses diplomacy and tact; can defuse even high-tension situations comfortably., • Planning - Accurately scopes out length and difficulty of tasks and projects; sets objectives and goals; breaks down work into the process steps; develops schedules and task/people assignments; anticipates and adjusts for problems and roadblocks; measures performance against goals; evaluates results., • Time Management - Uses his/her time effectively and efficiently; values time; concentrates his/her efforts on the more important priorities; gets more done in less time than others; can attend to a broader range of activities., • Written Communications - Is able to write clearly and succinctly in a variety of communication settings and styles; can get messages across that have the desired effect. Education/Training High School Diploma or GED required. Associates degree or training from an approved and accredited technical school in engineering or detailing/drafting may substitute for two (2) years of the required experience. A Bachelor’s Degree from an accredited college or university in Construction Management, Structural/Civil Engineering, or Business may substitute for 3 years of the required experience. Work Experience Experience in the coordination of structural steel projects is preferred. Associates degree or training from an approved and accredited technical school in engineering or detailing/drafting may substitute for two (2) years of the required experience. A Bachelor’s Degree from an accredited college or university in Construction Management, Structural/Civil Engineering, or Business may substitute for 3 years of the required experience. Specialized Knowledge Ability to read and interpret shop and design drawings. General understanding and knowledge of basic drafting skills, 3D modeling software/Tekla practices, fabrication and erection standards, standard technical terminology, common structural steel practices, and drafting room procedures. Software, Technology and Equipment used Personal Computer; phone; Computer Software includes: MS Windows 7, MS Office Word, Excel, and Outlook; Contract Manager, Primavera Scheduling, AutoCAD, Fabtrol and Tekla system. • #LI-AC1