Sustainable technology jobs in Rochester, New YorkCreate job alerts

Job DescriptionAbout TravertineTravertine is a Climate Tech start-up based in Boulder, CO, that is rapidly scaling a technology for low-waste, carbon-negative production of critical elements, focusing on phosphoric acid production for our go-to-market application. Our electrochemical process converts phosphate rock into phosphoric acid for EV batteries and fertilizers, while simultaneously converting carbon dioxide captured from the air into a mineral addition to cement. Travertine was spun out of UC Berkeley in 2022 to scale this process to gigatons of permanent CDR while massively reducing industrial waste. Since its founding, Travertine has raised over $25M in capital, including over $5M in US Federal and State government grants. As one of the first companies to receive pre-purchases of CDR from the new Stripe-led $1B Frontier fund, and as founding members of the Carbon Removal Alliance, we are committed to industrial decarbonization at scale. We were named C&EN 10 startups to watch in 2022, a Bloomberg NEF Pioneer in 2023, and RMI Third Derivative 1st Gigaton Captured program participants in 2024. Today we are focused on scaling up commercial deployments of our technology, starting with a Demonstration Plant that is being installed in Ontario, NY. We believe in developing practical approaches to solving the climate crisis. The RoleTravertine is seeking a highly motivated and safety-conscious Operator to be part of the team operating our first-of-a-kind Demonstration Plant. This role involves close collaboration with other operators, engineers, and the R&D team to maintain steady operation while acquiring the critical data needed to verify carbon dioxide removal and inform the commercial design. Tasks will include equipment operation and maintenance, solution preparation, sample collection, sample analysis, waste neutralization and disposal, and other tasks as needed. Ability to troubleshoot process equipment and process issues is critical for this role. If you want to be part of a high-performing team starting up and operating a first-of-a-kind sustainable chemical process, this is the role for you. Key Responsibilities • Operate a wide range of chemical processing equipment, including but not limited to reactors, pumps, heat exchangers, and filtration systems., • Follow standard operating procedures (SOPs), batch records, and safety protocols to conduct chemical processes., • Monitor process variables and make adjustments to ensure safe and optimal operation., • Collect samples, perform chemical analyses, record accurate and detailed operational data and observations during runs., • Perform routine equipment maintenance, cleaning, and calibrations., • Collaborate with engineers, chemists, and other technical staff to execute test plans and experiments., • Assist in the setup and teardown of process equipment and systems for various campaigns., • Troubleshoot equipment and process issues and report findings to engineering staff., • Maintain a clean, organized, and safe working environment in compliance with company policies and regulatory standards., • Participate in safety audits, process hazard analyses, and continuous improvement initiatives.Qualifications, • Associate's degree in Process Technology, Chemical Technology, Industrial Technology, Chemistry, Materials Science, or related field, • 0-2 years’ experience as a technician building, maintaining, and operating chemical equipment, • Experience with wet chemistry laboratory work and sample analysis, • Strong mechanical aptitude and familiarity with chemical processing equipment., • Basic understanding of process control systems and instrumentation., • Ability to interpret technical documents such as P&IDs, batch sheets, and MSDSs., • Excellent attention to detail and strong organizational skills., • Ability to work independently and as part of a multidisciplinary team., • Flexibility to work shifts, nights, weekends, or extended hours as needed. Note the plant will operate 24/7.Benefits, • Competitive pay, • Health, Dental, Vision, Life Insurance, • 401k with 100% match up to 3% of salary, • Flexible time off policy We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Description: The Part Time Lead Sorter will be responsible for assisting in the receiving of freight, breakdown of pallets, scanning, and sortation of boxes by driver routes, loading of vehicles, and helping to direct traffic in the facility. They’ll report to the Delivery Station Supervisor and be responsible for completing all sort activities safely within the shift. Shift: Monday to Wednesday - 2:00am to 7:00am Responsibilities You will... • Work within a team of associates to safely receive and sort all volume for the shift, • Ensures that incoming volume is directed to the correct destination on time, • Communicate delays or any issues to the Sort Supervisor, • Attend pre-sort meetings, working towards daily goals and safe operations, • Contribute to results on safety, productivity, cost, quality, and on-time delivery, • Use our internal technology and systems to conduct operations, • Assist in the warehouse areas as needed, • Enforce and follow all safety, GMP, and SQF policies/procedures., • Ability to meet productivity targets, • Have good attendance and punctuality You are... • Comfortable using computers and scanning devices, • Team and safety focused, • Able to work in a fast-paced environment., • Are able to use hands to move packages and operate electronic devices, • Ability to regularly lift/move up to 50 lbs and participate in a highly physical job through standing, walking, crouching, pulling, and pushing, • Are able to stand, walk, stoop, reach, and lift for a minimum of 10 to 12 hours with or without reasonable accommodation, • Comfortable operating a manual and electric pallet jack (training will be provided) You have... • High school diploma or equivalent (preferred), • Ability to read and write English, follow verbal instructions, and use simple math, • Must be at least 18 years old, • Ability to use scanning devices and other basic computer skills preferred, • Specific vision abilities required by this job include close vision and peripheral vision. This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors. New York Pay Range$18.75—$18.75 USDAbout HelloFresh We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers’ homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work! At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company’s commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at: • Europe: EUaccommodations@hellofresh.com, • APAC: APACaccommodations@hellofresh.com, • United States: USCandidateAccommodations@hellofresh.com, • Canada: CAaccommodations@hellofresh.com

Job Description Framing Technology designs and manufactures custom aluminum extrusion solutions, including machine frames, guarding systems, enclosures, and workstations for industrial and automation applications. We serve a wide range of customers, including OEMs, integrators, and manufacturers, delivering solutions that prioritize speed, flexibility, and reliability. We are currently looking to add an Outside Sales Representative to our growing team. This person will be responsible for driving new business development and expanding the company’s customer base across the northeast region. This role is strictly focused on outbound prospecting and new customer acquisition, requiring consistent activity to identify, engage, and convert new opportunities. The position plays a key role in building a sustainable pipeline and contributing to the company’s long-term revenue growth. This position requires a highly self-motivated, results-driven individual who can operate independently while managing a high level of sales activity. The ideal candidate will be able to develop a qualified pipeline, effectively communicate technical solutions, and convert opportunities into long-term customer relationships. This is a true “hunter” role, not an account management or order-taking position. Commission-based salary is uncapped and based solely on performance. Responsibilities Generate new business through consistent outbound prospecting efforts (calls, emails, networking, and in-person visits) Identify, qualify, and develop new customer relationships within target markets Build and maintain a strong, active pipeline of qualified opportunities Schedule and conduct meetings with prospective customers to present company capabilities and solutions Convert new opportunities into profitable, long-term customers Collaborate with the Sales Manager to prioritize high-value opportunities and align on strategy Maintain accurate and up-to-date activity, pipeline, and customer data within CRM (Odoo) Follow up consistently on all opportunities, quotes, and customer interactions Monitor industry trends and identify new markets, verticals, and opportunities Align sales efforts with company capabilities, production capacity, and strategic priorities Meet or exceed established sales and performance targets Sales-Related Key Competencies Strong prospecting and new business development skills Highly self-motivated and disciplined with a results-driven mindset Ability to build and manage a sales pipeline from initial contact through close Excellent communication, presentation, and relationship-building skills Ability to work independently while contributing to team goals Resilient and comfortable in a high-activity sales environment Strategic thinking with a focus on high-return opportunities Solid negotiating and closing skills Strong time management and organizational skills Qualifications Bachelor’s degree in business, marketing, engineering, or related field preferred 5+ years of outside or field sales experience (manufacturing or aluminum extrusion industry preferred) Ability to learn and communicate technical product offerings effectively Proven track record of meeting or exceeding sales targets Proficiency with CRM systems and standard business tools Willingness and ability to travel within the assigned territory Valid driver’s license and reliable transportation Performance Expectations & Metrics This role is designed for a high-performing sales professional focused on building a scalable book of business through consistent outbound prospecting and new customer acquisition. Success is measured through a combination of activity, pipeline development, and revenue generation. The Outside Sales Representative is expected to demonstrate strong discipline in prospecting, effective opportunity conversion, and consistent progress toward defined revenue milestones. Performance will be evaluated based on the following expectations and benchmarks: Pipeline Development: Establish a healthy, qualified pipeline within the first 90 days Revenue Milestones: Month 6: Achieve approximately $250K–$300K in closed revenue Month 9: Achieve $500K+ in closed revenue Month 12: Target $1M+ in total sales Year 1 Performance Benchmarks: $1M+: Strong performance $750K–$1M: Acceptable with continued development Below $750K: May require performance review Long-Term Growth: Build and sustain a $2M+ territory through ongoing customer acquisition and account development Activity & Execution: Maintain consistent outbound activity, effective follow-up, and accurate CRM usage Pipeline Quality: Maintain a strong pipeline with a focus on high-value, qualified opportunities Customer Development: Successfully convert new prospects into long-term, profitable customers Compensation & Performance Structure This role is designed for high-performing sales professionals seeking a performance-driven compensation model. • Base salary plus uncapped commission, • Tiered commission structure rewarding new revenue growth, • Significant earning potential, with top performers exceeding $200K+ annually, • Compensation heavily weighted toward new customer acquisition Success in this role is driven by consistent outbound activity, pipeline development, and the ability to close new business. Benefits • High-deductible medical insurance covered by the company. Additional plans available for purchase with company contributions., • Dental insurance covered by the company., • Vision insurance available for a low weekly deduction., • 4% 401K match, • No-cost short-term disability (in addition to state STD) and life insurance. Additional life insurance above company plan offered at a low cost., • 40 hours of sick time available to start (pro-rated depending on start date)., • 80 hours of vacation; accrual basis and available to use after 90-day introductory period. #hc233827

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Client Collaboration: Build and maintain strong relationships with clients. Understand their goals and expectations to deliver solutions that exceed requirements and build long-term trust. Skills, Education & Experience • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls., • Strong communication and interpersonal skills, with the ability to lead teams and collaborate effectively with clients and stakeholders Compensation and Benefits: • Estimated Salary Range: $95,472 - $130,640/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionSalary: $55,000-$101,000 Per Year About the Role This team member will play a critical role within our MEP team, leading electrical system designs, performing power distribution analysis, selecting equipment, and managing the preparation of engineering documents. The role involves collaborating with senior engineers, mentoring junior staff, and ensuring compliance with industry standards, energy codes, and best practices for power, lighting, lighting control, and fire alarm systems. Key Responsibilities • Design of electrical systems for commercial, institutional, and industrial buildings., • Perform load calculations, short-circuit analysis, and voltage drop calculations for system design., • Select and specify electrical distribution equipment, lighting systems, and controls., • Coordinate fire alarm system specifications and layouts with manufacturers and systems integrators., • Utilize AutoCAD and Revit to develop and refine electrical design layouts and construction drawings., • Research and ensure compliance with building codes, NFPA, NEC, and energy efficiency standards., • Manage projects independently or alongside senior engineers, ensuring deadlines and budgets are met., • Assist in client communications, site visits, and coordination with multidisciplinary teams., • Prepare technical reports, engineering specifications, and cost estimates. This position is open to the following office locations; please indicate which office you would prefer when filling out an application: • Binghamton, NY, • Horseheads, NY, • Rochester, NY, • Towanda, PA, • Williamsport, PA Qualifications • 5-9 years of experience in electrical engineering, power distribution, or a related field., • Bachelors degree in architectural engineering, electrical engineering technology, or electrical engineering preferred. (Associates in related field considered with experience)., • Experience with CAD/Drafting software such as AutoCAD or Revit., • Exposure to software such as ETAP or AGI32 would be beneficial but not required., • Strong verbal and written communication skills with the ability to collaborate across teams., • Knowledge of power distribution, lighting, and low voltage building systems., • Holds an Engineer-in-Training (EIT) certification or is working toward a Professional Engineer (PE) license. Benefits • Holidays, • PTO, • Health Insurance, • FSA/ HSA, • Life Insurance, • 401(K) plan, • Continuing Education Support About HUNT HUNT is a full-service A/E Firm with offices located in Albany, NY, Binghamton, NY, Horseheads, NY, Rochester, NY, Towanda, PA, and Williamsport, PA. As a firm, our vision is to build vibrant communities by empowering creativity and partnership. We have accomplished this to date by being an entrusted partner to our clients/communities, providing full-service design that is innovative, practical and community focused. In addition, we offer a family friendly, flexible workplace that aims to encourage long, successful, sustainable careers through a variety of life stages. We are excited to welcome you to apply to this strong culture and hope that your values align with those of the firm, which will further enhance our culture even as we look toward targeted growth opportunities. HUNT is an Equal Opportunity Employer (EOE). Salary commensurate with experience and qualifications.

Job Description Who are Re:Build Optimation and Re:Build Manufacturing? Re:Build Optimation is an industrial engineering design and fabrication firm in Rochester, New York. We work with customers in many industries to design and deliver unique automated industrial machines and skids to meet their requirements. As a part of the Re:Build Manufacturing company we are rebuilding America's manufacturing base and creating meaningful, sustainable jobs in areas that have been deindustrialized over the past 20-30 years. Our strategy is to employ technology, systems, deep financial resources, and best management practices to compete and win as manufacturers in the global market. Re:Build Manufacturing is a family of industrial businesses combining cutting-edge, enabling technologies, operational superiority, and strategic M&A to build America’s next generation industrial company. Re:Build leverages a deep expertise in operations management and technology to supercharge performance of its subsidiaries by implementing core technologies across industrial platforms in diversified growth markets. We seek to revitalize the U.S. manufacturing base over the coming decades, creating substantial opportunities for our employees and the communities where we operate. If you like a fast-paced environment where individuals can stretch and be challenged with a diverse set of projects, we offer a great deal of variety and empower our staff to take on as much responsibility as they can handle, offering a helping hand and experienced-based coaching and the support of a highly competent team. Our goal is to enable our employees to achieve their fullest potential, and through our association with Re:Build, provide avenues for personal and professional growth. Re:Build Manufacturing and Re:Build Optimation are investing deeply in revitalizing American manufacturing — and we’re looking for dedicated Welders (L1–L5) who want to grow their skills, contribute to meaningful projects, and work alongside some of the best tradespeople in the industry. As part of our fabrication and welding team, you’ll help build custom machinery, industrial equipment, structural assemblies, process skids, and high-precision components that support customers across energy, chemical, food, glass, aerospace, clean tech, and more. If you enjoy hands-on craftsmanship, continuous learning, and being part of a mission-driven company, this role is for you. Who we are looking for You will thrive at Re:Build Optimation if you: Take pride in your welding craft and enjoy producing clean, structurally sound welds. Appreciate working in a safe, organized, and team-oriented fabrication environment. Are eager to learn advanced welding, fabrication, and metalworking techniques. Enjoy working on a wide variety of custom projects — every day looks different. Want a long-term career with clear skill-based progression from L1 through L5. Value being part of a company that invests in your growth, your community, and your future. Embrace responsibility, collaboration, and craftsmanship. What You Get to Do (L1–L5 responsibilities increase with skill and experience) Perform basic MIG and stick welds in flat and horizontal positions under supervision. Assist with setting up and operating welding machines, fixtures, and fabrication tools. Support layout, fit-up, and tack welding using basic shop drawings and weld symbols. Help prep and align pipe, tube, and structural materials; observe stainless steel processes. Participate in visual weld inspections and learn to identify common weld defects. Maintain a clean, safe work environment in accordance with OSHA, 5S, and company safety procedures. Collaborate with fabricators, machinists, engineers, and project teams on diverse work. Progress to more advanced welding (vertical, overhead, TIG, stainless, pressure, etc.) as you move up levels. What You Will Bring to the Team • High school diploma or equivalent experience required., • Completion of a recognized welding program or apprenticeship., • Basic knowledge of welding tools, procedures, and safety practices., • Proven skill in welding in flat and horizontal positions., • Capability to comprehend and adhere to basic shop schematics., • Eagerness to learn and grow in advanced welding and fabrication techniques. Compensation Range: Hourly rate for this position is expected to be between $27.00 to $55.00 based on education and years of experience. This role is eligible to participate in our annual bonus plan and long term incentive plan. The BIG payoff We are a company who is going to make a difference in the industries and the communities in which we choose to operate. Every employee of Re:Build will share ownership in the company and will share in the financial rewards of the success we achieve together, at all levels of the company! We want to work with people that reflect the communities in which we operate Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure and life experiences. Or for any other reason. Re:Build is committed to providing reasonable accommodation for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at accommodations.ta@ReBuildmanufacturing.com or you may call us at 617.909.6275.

Job Description Technician I, Garage Days Alignments Starting Pay:$33.17 per hour Top Rate Within 3 Years:$41.48 per hour AVAILABLE SHIFT:7:00 am 3:30 pm Monday, Thursday - Sunday 7:00 am 3:30 pm DAYS OFF: Tuesday and Wednesday Union Representation:ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • RTS Pension Plan A monthly lifetime income that grows as you continue working at RTS. Your benefit is based on your years of credited service and the pension multiplier, and is not affected by investment gains or losses. • Excellent pay and union security advance to $41.48/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Training provided stay current with the latest technology, • Tool Allowance provided, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Career growth opportunities to move up and build a long-term career What You'll Do • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor, • Must be able to perform proper front wheel alignments in order to maximize tire mileage on Articulated Buses, 40 Foot Buses and Non-Revenue Vehicles as required, • Must be able to perform proper front-wheel alignments to maximize tire life on articulated buses, 40-foot buses, and non-revenue vehicles, • May be assigned articulated bus repairs and overhauls, ramp and battery PM inspections and repairs, as well as other garage work, road calls, and towing as needed, • Other duties as assigned What We're Looking For Education/Experience • Two (2) years in an accredited diesel mechanics program or comparable technical coursework OR • Equivalent, verifiable work experience (two years may substitute for one year of education), • Excellent Customer Service skills, including but not limited to the ability to clearly and effectively communicate with customers, are a must. Other Requirements • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical, • English proficiency required for safety, communication, and use of manuals/instructions PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Company Overview At Veo, our mission is to end car dependency by making clean transportation accessible to all. A leading shared micromobility provider in North America, Veo provides millions of bike and scooter rides annually in over 60 cities and universities from Los Angeles to New York City. Veo offers the most diverse and accessible vehicle fleet in the country built to expand who can ride and what trips are possible. We design and manufacture our vehicles, hardware, and software systems in-house and operate our local markets directly to ensure safe and reliable service. As the first profitable micromobility company in North America, Veo is built for long-term growth and partnership with cities. Veo has been recognized as one of Fast Company's Most Innovative Companies and a Top GreenTech Company by TIME. As we continue to scale, we are looking for exceptionally talented individuals who are excited to help shape the next era of micromobility. Location preferred: This role is open to candidates currently residing in or within close proximity to the following locations: Los Angeles, CA; New York, NY; Columbus, OH; Rochester, NY; San Antonio, TX; Salt Lake City, UT; Cleveland, OH; and Syracuse, NY. Role Overview: As Veo's Policy and Partnerships Manager you will work closely with the Director of Government Partnerships and team of Policy and Partnerships Managers (PPMs) to develop, launch, and manage new micromobility markets and partnerships. You will work cross-functionally with the Engineering and Operations departments, among others, to ensure that Veo's teams are aligned to continue our rapid growth and promote sustainable local operations. Responsibilities and Duties: • Establish and manage long-term and constructive relationships with clients, including city staff, elected officials, community based organizations, businesses, and advocacy groups., • Liaise with city, university, and community partners to establish program rules and requirements that benefit Veo's local operations approach and result in operational and financial sustainability., • Identify and cultivate new market leads and help Veo expand its service and products to new cities., • Advise Veo's Operations team to ensure compliance with local rules and regulations., • Contribute strategy framework and local knowledge to Market Entry team to retain, renew, and grow markets., • Provide guidance and insight on legal and compliance matters related to policy initiatives and partnerships., • Travel, as needed, to meet with stakeholders, attend relevant events, and advance the company's mission in the micromobility space. Qualifications and Skills: • 3-5 years of experience working on public-private partnerships, or similar background in urban/transportation planning, politics, urban development, or relevant areas of law and policy, • Candidates with a Juris Doctor (JD) are especially encouraged to apply., • Demonstrated experience developing and fostering community partnerships, • Outstanding ability to manage interplay between internal stakeholders; ability to quickly balance competing interests and focus on solutions, • Experience interacting with various City agencies and bureaucracy, and navigating the nexus of local government and community stakeholders strongly preferred, • Entrepreneurial and scrappy spirit, • Proven ability to effectively lead cross-functional efforts to manage complex partnerships and projects effectively and responsibly, • SQL and data analysis skills and experience a huge bonus, • Ability to thrive in a fast-paced, demanding (and sometimes unstructured) environment, • Natural people connector and responsible relationship builder, • Strong proposal writing, communication, and interpersonal skills – A good storyteller capable of effective communication to varied and diverse audiences, • Ability to prioritize and maintain attention to detail across varied projects and partnerships, • Independent self-starter with effective people collaboration skills, • Love traveling and welcome short-notice arrangements Benefits: • Medical, dental, vision coverage, • 401(k), • Unlimited PTO, • Opportunity to work in a fast-paced, early-stage technology company, • Unlimited Veo ride credits, • A commitment to professional development and mentorship The base salary range for this full-time position is $90,000 - $125,000 + Annual Performance Bonus + Full Range of Benefits. Veo is a total compensation company, and pay is determined by geographic cost of labor and additional factors, including job-related skills, experience, and relevant education or training - so not all candidates will be eligible for the upper end of the salary range. Our total compensation package for this role, including bonus potential, ranges from $90,000 to $138,000 per year. Note: Veo benefit, bonus and stock programs may be subject to eligibility requirements and other terms of the applicable plan or program. The listed range is a good faith estimate, and exact compensation and total package may vary depending on market conditions and performance.

Job Description About RED-Rochester RED-Rochester LLC, is the primary utility provider and district energy supplier for the 1,200-acre Eastman Business Park, one of the world’s most comprehensive industrial campuses located in Rochester, NY. RED-Rochester owns and operates a highly reliable and efficient utility infrastructure that delivers a full suite of services—utilizing high pressure industrial boilers and a gas turbine-supporting electricity, steam, chilled water, and other critical utilities across the park. These services are distributed through a dedicated microgrid and industrial systems designed to meet the demands of diverse industrial and commercial tenants. RED-Rochester Mission Statement Through our unwavering commitment to safety, reliability, environmental stewardship, and community, we strive to be a trusted utilities provider that drives sustainable development, powers progress and leads the way towards a greener and brighter future Position Summary Working with a wide variety of pneumatic, electronic, or digital instrumentation and control systems, responsible to install, maintain and repair the measuring and control instruments and control systems used in our utility plants and distribution systems. Essential Duties and Responsibilities • Installs, repairs, maintains, and adjusts process instruments, used to control, and measure variables, such as pressure, flow, temperature, and analytical properties, using precision instruments and hand tools., • Troubleshoots, repairs, and maintains park-wide distribution flow metering., • Repairs and maintains pneumatic and electronic final control elements, such as control valves and damper drives., • May occasionally work in motor starters and other electrical enclosures to debug and repair control system issues., • Inspects and calibrates instruments and test equipment periodically and adjusts calibration to ensure functioning within specified or established standards., • Repairs and maintains I/O, power systems, and control systems hardware., • Maintains and edits control logic, control system programming and operating graphics for both programmable logic controllers and distributed control systems. Education and/or Experience: Two-year associate degree in engineering technology or a related field, vocational school certification, or an equivalent combination of education and experience. Minimum five years’ experience in control systems, flow metering, or other instrumentation in an industrial setting. Qualifications Must have valid drivers’ license Competencies • Good communication skills, • Strong mechanical and electrical aptitude., • Ability to follow procedures, work instructions and safety/environmental rules and regulations., • Ability to problem solve with demonstrated trouble shooting skills., • Ability to recognize opportunities for process improvements and assist in implementation., • Ability to work independently., • Ability to consult manuals, read and interpret circuit diagrams, electrical schematics, and other drawings., • Knowledge of industrial utility equipment and systems including boilers, turbines, generators, chillers, cooling towers, and air compressors., • Knowledge of Emerson Ovation control system or other distributed control systems is a plus. Work Environment Location: Eastman Business Park, Rochester, NY Travel: Limited to travel within the park grounds, as required. Compensation As required by multiple state pay transparency laws, RED-Rochester provides a reasonable range of compensation for each job posting. Actual compensation is influenced by an array of factors including, but not limited to, skill set, level of experience, and specific office location. The range of starting pay for this role is $26.00 to $37.00 per hour. This position is also eligible to participate in the Company’s annual bonus program. Benefits In addition to our competitive compensation practices, we offer a strong benefits package that includes: • A generous time off program, • Upon hire, up to 156 hours of accrued vacation time, • Personal time of 3 days annually, • 10 company-paid holidays, • Annual bonus program (dependent on position), • Medical Insurance, Dental Insurance, and Vision Insurance plans, • Company paid Life Insurance/Short Term Disability/Long Term Disability, • Flexible Spending Account (FSA) and Health Spending Account (HSA) options, • 401(k) with immediate vesting and a competitive company match, • Educational assistance program RED-Rochester is committed to diversity in its workforce including Equal Opportunity Employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, and/or veteran status.

Job Description Job Summary Arnold Magnetic Technologies is seeking a strategic and results‑driven Inside Sales Manager to lead and elevate its inside sales organization. This role is responsible for driving revenue growth, managing key customer relationships, optimizing sales processes, and developing a high‑performing team that supports the company’s industrial, aerospace, defense, medical, and commercial business segments. The Inside Sales Manager serves as a critical bridge between customers, field sales, engineering, operations, and executive leadership. This role requires a strong commercial mindset, technical aptitude, and leadership experience within advanced manufacturing, engineered materials, or industrial solutions environments. Key Responsibilities Leadership & Team Management • Lead, mentor, and develop the inside sales team to achieve revenue, margin, and customer satisfaction goals., • Establish performance metrics, accountability standards, and continuous improvement initiatives., • Foster a collaborative, customer-focused culture aligned with company values and strategic priorities., • Recruit, onboard, and retain top inside sales talent. Sales Strategy & Execution • Develop and execute inside sales strategies that support business growth across target markets., • Drive pipeline development, opportunity conversion, and account penetration initiatives., • Partner with field sales and business development teams to ensure seamless account coverage., • Identify cross‑selling and upselling opportunities across product lines and divisions. Customer Relationship Management • Build and maintain strong relationships with strategic customers and channel partners., • Oversee quoting, proposal development, pricing strategy, and contract negotiations., • Ensure timely resolution of customer issues, including escalation management., • Support key account planning and long-term customer retention strategies. Operational Excellence • Streamline sales processes to improve responsiveness, efficiency, and forecasting accuracy., • Leverage CRM systems and analytics to monitor performance and inform decision‑making., • Collaborate with operations, supply chain, and engineering teams to align customer expectations with delivery capabilities., • Drive improvements related to order management, demand planning, and customer communications. Business Intelligence & Reporting • Analyze market trends, customer needs, and competitive activity to guide strategic decisions., • Prepare regular sales reports, forecasts, and executive‑level presentations., • Contribute to annual budgeting, sales planning, and enterprise growth strategy development. Qualifications • Bachelor’s degree in Business, Engineering, Marketing, or a related field (Master’s degree or advanced technical degree preferred)., • 8–12+ years of progressive sales experience, including leadership roles in inside sales, account management, or commercial operations., • Experience in manufacturing, industrial products, engineered materials, or technical B2B environments, with the ability to support detailed contract review processes., • Background supporting aerospace, defense, medical, automotive, and/or industrial markets., • Demonstrated success leading teams, driving revenue and margin growth, and improving sales effectiveness., • Strong business acumen with advanced analytical, forecasting, and problem‑solving skills., • Excellent communication, negotiation, and relationship‑building capabilities., • Proficiency with CRM platforms, quoting tools, sales technology, and performance analytics., • Working knowledge of contract structures, complex pricing models, long‑term supply agreements, and commercial terms., • Familiarity with engineered materials, magnetics, or custom manufacturing solutions (an asset to the role)., • Ability to travel domestically approximately 30–50% of the time. Skills & Competencies • Leadership & Talent Development – Provides clear direction, aligns team goals with commercial strategy, and drives sustainable revenue and margin growth while coaching, motivating, and developing team members to strengthen capability, engagement, and overall performance., • Commercial Excellence – Enhances sales effectiveness through disciplined pricing, value‑based selling, and strong pipeline management., • Customer‑Centric Thinking – Anticipates customer needs and ensures decisions, priorities, and processes elevate the customer experience., • Technical Acumen – Understands engineered materials, product specifications, and manufacturing capabilities to support accurate quoting and solution positioning., • Cross‑Functional Collaboration – Builds strong partnerships with field sales, engineering, operations, and supply chain to ensure seamless customer support and execution., • CRM & Data‑Driven Sales Enablement – Leverages CRM systems, analytics dashboards, forecasting tools, and quoting software to enhance visibility, guide strategic decisions, prioritize opportunities, and improve sales performance., • Process Optimization – Improves quote‑to‑order workflows, reporting mechanisms, and sales processes for efficiency, accuracy, and scalability., • Communication & Negotiation Skills – Communicates clearly across levels and negotiates pricing, terms, and complex requirements with confidence., • Problem‑Solving & Escalation Management – Quickly diagnoses issues and leads cross‑functional solutions that balance customer impact and operational realities. Why Join Arnold? Arnold Magnetic Technologies is a global leader in high‑performance magnetic materials and precision magnetic assemblies. Our products are mission‑critical to applications across aerospace, defense, energy, medical, and automotive markets. You’ll be joining a team enabling innovation in electric propulsion, defense electronics, and advanced systems through cutting‑edge magnetic technology. Arnold Magnetic Technologies is an Equal Opportunity / Affirmative Action Employer. Minority/Female/Disability/Veteran #ROC

Job Description Bus Technician / Mechanic I - (3rd Shift) Starting Pay: $33.17per hour Top Rate Within 3 Years: $41.48per hour AVAILABLE SHIFT:Sunday-Thursday, 11:00 pm-7:30 am (Friday and Saturday off) Union Representation: ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • RTS Pension Plan A monthly lifetime income that grows as you continue working at RTS. Your benefit is based on your years of credited service and the pension multiplier, and is not affected by investment gains or losses. • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Training provided stay current with the latest technology, • Tool Allowance provided, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Career growth opportunities to move up and build a long-term career What You'll Do • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor, • Other duties as assigned What We're Looking For Education/Experience • Two (2) years in an accredited diesel mechanics program or comparable technical coursework OR • Equivalent, verifiable work experience (two years may substitute for one year of education) Other Requirements • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical, • English proficiency required for safety, communication, and use of manuals/instructions PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION: Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Shape complex piping systems that power modern manufacturing Location: Rochester, NY At Re:Build Optimation, you’ll join a team that designs and fabricates automated equipment and process skids for customers across diverse industries. As part of the Re:Build Manufacturing family, we are revitalizing American manufacturing with advanced technology, disciplined operations, and a long-term investment mindset—creating meaningful, sustainable careers in communities like Rochester. A day in this role You’ll arrive to a shop that hums with precision. Drawings in hand, you’ll lay out and cut pipe using the right method for the job—hand tools, pipe cutters, cutting torches, or a pipe cutting machine. After prepping ends, you’ll assemble tubing and fittings, and join pipe by threading, soldering, brazing, or cementing non‑metallic connections to spec. You’ll inspect systems and supporting machinery for issues, operate material handling equipment to position pipe and heavy components, and keep work flowing safely and efficiently. What you’ll tackle • Cut, prep, and fit pipe with both handheld and powered tools, • Assemble tubes, fittings, and non‑metallic attachments; complete joints via threading, soldering, brazing, or cemented connections, • Inspect piping and related machinery to spot malfunctions early, • Operate lifts and other material movement equipment to handle pipe, supports, and heavy machinery, • Collaborate with engineers, designers, programmers, planners, project managers, and customers to deliver top‑quality results, • Champion safety—follow NFPA 70E procedures; participate in toolbox talks, safety audits, and continuous improvements, • Act promptly to correct and/or report unsafe conditions, acts, or incidents, • Model craftsmanship; mentor less‑experienced teammates and pitch in across tasks as needed What you bring, • Hands‑on pipefitting experience with strong blueprint reading, familiarity with plumbing codes, and solid trade math, • Meticulous attention to detail and accuracy under time and quality pressure, • Clear communication and a collaborative approach with clients, engineers, and partners, • Physical ability to climb and work at heights, enter confined spaces, and lift/move heavy items, • Comfort working in hot/cold conditions and all weather, • Ability to read and write in English; basic computer and communication skills, • Regular full‑time availability on a 40‑hour day schedule, with flexibility for overtime and occasional travel Growth, rewards, and impact Expect variety, autonomy, and support from seasoned teammates. We’ll coach you to take on more responsibility as you’re ready, and you’ll build a portfolio of unique, custom projects. Compensation: $27.00–$55.00 per hour, depending on education and years of experience. This role is eligible for our annual bonus plan and long‑term incentive plan. Every employee shares in the company’s success—ownership participation is part of how we win together and invest in our people and communities. Who we are Re:Build Optimation is an industrial engineering design and fabrication firm in Rochester, NY, delivering automated machines and skids tailored to customer needs. As part of Re:Build Manufacturing—a network of industrial businesses applying cutting‑edge technologies and disciplined operations—we’re rebuilding the U.S. manufacturing base for the long term. We want to work with people that reflect the communities in which we operate Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure and life experiences. Or for any other reason. Re:Build is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at accommodations.ta@ReBuildmanufacturing.com or you may call us at 617.909.6275.

Job Description Bus Technician / Mechanic I (3rd Shift - Thursday & Friday Off) Starting Pay: $33.17per hour Top Rate Within 3 Years: $41.48per hour Schedule: Monday, Tuesday, Wednesday, 11:00 pm-7:30 am, Saturday &Sunday, 5:00 pm-2:00 am (Thursday and Friday off) Union Representation: ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • RTS Pension Plan A monthly lifetime income that grows as you continue working at RTS. Your benefit is based on your years of credited service and the pension multiplier, and is not affected by investment gains or losses. • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Training provided stay current with the latest technology, • Tool Allowance provided, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Career growth opportunities to move up and build a long-term career What You'll Do • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor, • Other duties as assigned What We're Looking For Education/Experience • Two (2) years in an accredited diesel mechanics program or comparable technical coursework OR • Equivalent, verifiable work experience (two years may substitute for one year of education), • Excellent Customer Service skills, including but not limited to the ability to clearly and effectively communicate with customers, are a must. Other Requirements • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical, • English proficiency required for safety, communication, and use of manuals/instructions PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Bus Technician / Mechanic I - (Evenings & Weekends) Starting Pay:$ 33.17 per hour Top Rate Within 3 Years:$41.48 per hour AVAILABLE SHIFT:Sunday, Monday, Thursday 3:00 pm 11:30 pm. Friday and Saturday 5:00 pm 2:00 am. With Tuesday and Wednesday OFF Union Representation:ATU Local 282 At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Why Work With Us • RTS Pension Plan A monthly lifetime income that grows as you continue working at RTS. Your benefit is based on your years of credited service and the pension multiplier, and is not affected by investment gains or losses. • Excellent pay and union security advance to $40.27/hour within 3 years, • Stable, consistent work no flat rate; steady weekly pay, • Training provided stay current with the latest technology, • Tool Allowance provided, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more, • Career growth opportunities to move up and build a long-term career What You'll Do • Maintain, repair, and overhaul RTS buses and fleet vehicles, • Perform inspections, diagnostics, and preventive maintenance, • Replace and adjust parts; complete necessary test drives, • Operate diagnostic equipment (e.g., Cummins InSite, Allison), • Perform welding, brazing, cutting torch work, and operate tow truck as needed, • Report safety concerns and equipment issues to supervisor, • Other duties as assigned What We're Looking For Education/Experience • Two (2) years in an accredited diesel mechanics program or comparable technical coursework OR • Equivalent, verifiable work experience (two years may substitute for one year of education) Other Requirements • Must have own tools, • Must obtain NYS CDL Class B permit with passenger & air brake endorsements prior to start; CDL-B license required within 90 days, • Must obtain CDL Class A permit & towing endorsement (may be after hire); CDL-A required within 90 days of permit, • Must pass post-offer physical, • English proficiency required for safety, communication, and use of manuals/instructions PHYSICAL DEMANDS & WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee frequently works in outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration. The employee works near moving mechanical parts. The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. ADDITIONAL INFORMATION Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Research Engineer Founded in 2017 and headquartered in Rochester, NY, REMADE℠ is a 170+ member public-private partnership funded in part by the U.S. Department of Energy’s Office of Advanced Materials and Manufacturing Technologies (AMMTO) with an initial investment of $140 million. REMADE is the only national institute focused entirely on developing innovative technologies to accelerate the U.S.’s transition to a Circular Economy. In partnership with industry, academia, trade organizations, and national laboratories, REMADE enables early-stage applied research and development that will create jobs, dramatically reduce embodied energy and greenhouse gas emissions, and increase the supply and use of recycled materials. For more information about REMADE (Reducing EMbodied Energy And Decreasing Emissions), visit www.remadeinstitute.org. Position Summary The primary responsibility of this position is to support the development and administration of state grant programs that support the creation of technologies to expand the waste tire market and fund demonstration projects aimed at increasing the use of waste tires. This role is vital for driving innovation and fostering sustainable solutions for waste tire management throughout New York State and beyond. The successful candidate will play a major role in managing these grant programs, collaborate with stakeholders, and guide the development of both technology initiatives and demonstration projects focused on expanding the use of waste tires. In addition to managing the tire recycling program, the research engineer will support the broader mission of the Institute by fostering relationships with stakeholders in industry, academia, and government, conducting research on market trends, opportunities, and barriers to new technologies, assisting in the preparation of proposals for securing government or private funding, and contributing to other Institute initiatives as needed. This job is based in the Rochester, NY office. Salary Range: $75k to $90k Primary Responsibilities • Support the development and oversight of a state-funded grant program for waste tire management and the expansion of recycling markets. This includes designing and administering the grant application process, establishing criteria and evaluating proposals, and overseeing the selection and contracting of recipients., • Establish clear objectives, timelines, and milestones for grant recipients. Monitor progress and ensure that projects remain within scope, budget, and timeframe. Conduct site visits and inspections as necessary to evaluate project outcomes and compliance., • Provide technical expertise and guidance to applicants and stakeholders, ensuring that the proposed technologies or solutions meet industry needs and demonstrate feasibility, scalability, and sustainability., • Submit all necessary reporting to state and regulatory bodies. Ensure all activities comply with state laws, regulations, and grant guidelines., • Build strong relationships and promote engagement with stakeholders from industry, academia, and government agencies., • Promote knowledge sharing and best practices in the rubber and tire recycling industry., • Conduct online research to identify market trends, evaluate market opportunities and identify technical, economic, environmental and institutional barriers to the implementation and deployment of new technologies relevant to building a circular economy, • Assist in the preparation of proposals to obtain government and/or private funding of new projects or initiatives, • Assist in other Institute deliverables as needed Required Skills and Experience • Experience in one of the following areas:, • Markets for recycled products, preferably rubber, • Technologies for tire recycling, • Rubber compound formulations and manufacturing processes, • Regulations governing waste tire disposal, • Familiarity with New York State businesses involved in tire disposal, recycling, and related activities, • Experience working with federal and/or state agencies, with a preference for candidates who have managed government-funded grant programs, • Project management experience with technical projects in a research environment preferred, • Capable of conducting technology assessments for new and emerging technologies using tools such as technoeconomic analysis, net energy analysis, Lifecyle analysis, and market opportunity analysis., • Benchmarking of new or emerging technology relative to the state-of-the-art, • Ability to systematically analyze complex, technology centric problems, identify technical, economic, market, and institutional barriers to the adoption of emerging technologies, and develop and implement effective solutions., • Strong verbal and written communication skills, and ability to convey complex information in a way that others can readily understand, • Strong attention to detail, ability to multi-task and work effectively in a fast-paced environment, • Grant/proposal writing experience a plus, • The applicant should have a total of 5+ years of related experience. Educational Experience • Bachelor’s Degree required in engineering or other technical related fieldThe REMADE Institute does not discriminate in the screening or submission of candidates on the basis of race, color, religion, sex, age, national origin, marital status, disability, or other protected status. All applicants must be U.S. citizens or lawful permanent residents Powered by JazzHR pIoDypAmPf

Job Description:\n\nGet to Know Rivia Mind At Rivia Mind, we believe great mental health care begins with a human connection. Where We Are: We are a psychiatrist-owned mental health practice rooted in New York City, serving individuals across New York, New Jersey, Connecticut, Florida, and Massachusetts through both virtual and hybrid appointments. How We Support: With a Whole-Person Lens, we provide compassionate, science-based care that honors the full complexity of a person's biology, psychology, and life circumstances. We go beyond symptom management with an interdisciplinary care model grounded in collaboration, personalization, and delivered with warmth, respect, and clinical integrity. We bring a high-touch, human-centered approach to every aspect of care, from clinical treatment to operational coordination. Click Here to learn more about our services. Thrive Together: 🌟 Our shared North Star unites us to provide the best patient experience. At Rivia Mind, we cultivate a collegial culture rooted in:A foundation of shared values and reciprocal supportA mindset of curiosity, learning, and growthA spirit of warmth, openness, and authentic connection Together, we turn challenges into opportunities, and every team member helps shape the future of care at Rivia Mind. Job Summary Rivia Mind is expanding our distinguished Psychiatry team (8+) and is seeking a Board-Eligible or Board-Certified Psychiatrist who values clinical excellence and comprehensive patient care. As a physician-founded practice, we understand the importance of creating an environment where psychiatrists can practice meaningfully, supported by a robust operational infrastructure. Joining our practice as a Staff Psychiatrist offers the opportunity to work in a collaborative, growth-oriented community with the potential to advance into Supervisory and Leadership roles. You'll work within our multi-disciplinary team of 160+ mental health professionals while maintaining the decision-making authority essential to psychiatric practice.Balance of clinical autonomy and collaborative supportImplement both evidence-based psychopharmacology and psychotherapeutic approaches, tailored to each patientMinimized administrative burden, maximized quality patient interaction time, and enhanced professional growthGrow into supervisory or leadership roles, contribute to clinical training initiatives, and participate in quality improvement projects Join a forward-thinking practice where psychiatrists are empowered to deliver care that truly reflects the complex interplay of biological, psychological, and social factors that shape mental health outcomes. Work Location: Remote Application Window: Until August, 2026 Anticipated Start Date: Fall 2026, or Winter 2027 # of Openings: 2 If you would like a hybrid position, please advise. We have an office located near Bryant Park in New York City, NY. Job Responsibilities & Qualifications Patient Care (70%)Provide evidence-based psychotherapy and medication managementDevelop personalized treatment plans for diverse patients (50/week)Deliver care via a telehealth platform Clinical Collaboration & Development (30%)Offer guidance to peers and supervisorsParticipate in interdisciplinary team meetingsExemplify Rivia Mind's values and collaborative approach How we support you:Collaborative multi-disciplinary team of Psychotherapists, Psychiatry Nurse Practitioners, and PsychiatristsAccessible support from your MD Supervisor, Colleagues & Operational Support staffDevelopmental growth and learning opportunities across personal, professional & intellectual enrichmentTeam access to diverse resources - internal materials and recordings, UpToDate, Relias, and more! ResponsibilitiesProvide excellent quality clinical care on a frequent, recurring basis that exemplifies Rivia Mind's culture, values, and guiding principlesProvide services to a diverse demographic of patients with an average caseload of 50 patients per week / around 8-12 per day (Caseload numbers may vary based on clinical judgment, patient needs, etc.).Maintain a consistent weekly patient care schedule in alignment with Rivia Mind's standard productivity expectations. Follow Care Model practices that emphasize continuity of care, high-frequency follow-up appointments, and effective calendar management.Conduct comprehensive intake evaluations and develop curated patient-centered treatment plans.Curate comprehensive patient-centered treatment plans and provide resources as needed.Provide appropriate Psychotherapy practices that leverage various modalities (CBT, DBT, motivational interviewing, etc.) with proper Psychopharmacology prescribing practices.Appropriately prescribe medication prescriptions & refills, considering the best judgment of the patient's well-being.Provides clinical support & counseling to diverse patient populations in a tele-health environment.Provide clinical guidance and valued input to patients and peers.Comply with clinical standards and adhere to timely and thorough session note documentation. (i.e. Notes submitted by EOW)Participate in and support routine and ad-hoc clinical-wide meetings and internal trainings to foster an engaging and continuous learning team environment.Be an ambassador of Rivia Minds culture by exemplifying our values and working with our mission at the forefront.Promote a friendly work culture that encourages a fun, collaborative, and co-learning environment that benefits individuals' well-being, self-improvement, and potential.Provide support to Psychiatric Supervisors as needed for coverage and other administrative tasks.Perform other related role and team function duties as assigned by department and group leaders. Qualifications, Skills & Attributes Required Education Level: Doctorate Education Details:Earned a Doctor of Medicine degree from an accredited schoolCompleted a Psychiatry residency program, completing diverse rotations including Primary Care within the training programAdditional residencies appreciated are: Neurology, Internal Medicine, and Obstetrics-Gynecology Licensure/Certification RequirementsActive and in good standing license for at least one of these states:New York, New Jersey, Connecticut, Florida, or Massachusetts as a Medical DoctorAn active and unrestricted license to practice medicine and a DEA number for at least one of the states listed aboveBoard-Eligible or Board-certified in Psychiatry Additional Qualifications, Skills & AttributesIdeally, 1 (one) or more years of post-residency clinical work experience in Psychiatry, but we will consider recent graduatesInterest in growing into a Supervisory/Leadership role within our practiceProven experience and desire to support Psychotherapy treatmentPsychotherapy Modality experience (CBT, DBT, etc.)Psychodynamic Modality experience preferredExperience working with Patients in an Outpatient settingTelehealth/telemedicine experiencePrescribes MedicationsConfidently and efficiently document concurrently within patient sessionsExcellent clinical knowledge and communication skillsPatient EducationDiagnosis and Treatment PlanningProficient with utilizing diverse technology platforms and systems (Google Suite, company-wide platforms/software, and EHR platforms when applicable)Intermediate computer skills and technical aptitude required Benefits Benefits That Support You, Personally and Professionally At Rivia Mind, we know that providing exceptional care starts with caring for our team. That's why we offer a comprehensive, thoughtfully designed benefits package that supports your health, financial wellness, growth, and overall well-being—so you can thrive in work and life. Learn more here. 3 weeks of front-loaded PTO + 9 paid holidaysAnnual office closure (Dec 25–Jan 1)Annual Impact Days for volunteering or professional development401(k) with immediate employer match Referral bonus potentialAnnual Continuing Education (CE) Stipend + Flexible Benefit ReimbursementMedical, dental, and vision insurance — with EAP and additional wellness programsVoluntary benefits, HSA, DCA, FSA (based on plan), transit & parking optionsBereavement leave (including pet bereavement) We're a community of clinicians and care-minded professionals who believe in sustainable practice, personal growth, and compassionate support. Come thrive with us. Compensation & Employment Details Pay Range: $220,000 to $260,000 base salary Pay Type: Salary Bonus Terms: Our compensation package includes a base salary based on compensable factors. Additionally, clinicians are eligible for quarterly bonuses of up to $2,000 (up to $8,000 annually), awarded based on defined metrics related to clinical excellence and care model performance. Department: Psychiatry Supervisor: Medical Director Supervisees: None Employment Status: Full Time (40 hours a week) Minimum Hours: 40 Exemption Status: Exempt W-2 Work Schedule We collaborate with each provider to determine a mutually beneficial and sustainable schedule. Our focus is to develop a supportive schedule that meets both the needs of our patients and the providers' preferences. Your schedule will be determined with you before starting the role. Our operating hours are M-F: 8 am to 8 pm and Saturday: 9 am to 5 pm, but we do allow a schedule to have a start as early as 7 am, and end as late as 9 pm M-F.In-office day is based on availability if hybrid work is preferredInclude at least four(4)+ hours within your schedule, which should be after 5 pm on a weekday or have hours on the weekend. On-call is not required, but checking and responding to emails on unscheduled days is required unless on PTO.Having a consistent weekly schedule is necessary, but start and end times per day can be different each day of the week, as a set recurring schedule. We appreciate the dedication and care our providers bring to their work and the patients they serve. Occasional flexibility may be needed to accommodate patient needs or support the growth of your caseload, such as scheduling initial consultations, managing urgent concerns, coordinating care with the broader team, and completing other responsibilities. Please feel free to discuss this with the recruiter during your first interview to understand the flexibility and requirements further. Compensation Determination: The pay range listed reflects the minimum and maximum base salary for this role, determined through an internal compensation assessment that considers similar labor markets to our practice across the United States. Actual compensation is influenced by compensable factors such as location, role responsibilities, required skills, relevant experience, qualifications, role level, and applicable credentials. It is uncommon for an individual to be hired at or near the top of the posted range. In addition to base salary, total compensation may include bonuses, commissions, or other incentives depending on the role. Location Eligibility: At this time, we are only able to consider applicants whose primary residence is in one of the following states within the United States of America: Connecticut, Florida, Massachusetts, New Jersey, New York, North Carolina, Pennsylvania, South Carolina, Texas. Because this is not a solely on-site role, your primary residence must remain in one of these approved states. Please note that residing outside of these states—even temporarily—may result in employment eligibility issues, tax implications, or other regulatory concerns. If your location changes or you're based elsewhere, we encourage you to stay connected for future openings. Equal Opportunity Employer: Rivia Mind is an Equal Employment Opportunity Employer. It is the policy of Rivia Mind to provide equal employment opportunities without regard to race, color, ancestry, religion, sex, gender identity or expression, pregnancy, age, ethnic or national origin, immigration or citizenship status, hair, weight, height, disability, marital status, veteran status, sexual orientation, genetic information/GINA, political affiliation or activity, or any other protected characteristic under applicable law. It is also the policy of Rivia Mind that qualified individuals with disabilities receive equal opportunity regarding job application procedures, hiring, and all aspects of the employment process. Rivia Mind is committed to the full inclusion of all qualified individuals. Consistent with the Americans with Disabilities Act (ADA) and applicable state and local laws, it is the policy of Rivia Mind to provide reasonable accommodations when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed to participate in the job application or interview process, pre-employment testing, to otherwise participate in the selection process, to perform the essential job functions, and/or to receive other benefits and privileges of employment, please contact us directly. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Rivia Mind participates in E-Verify to confirm the identity and employment eligibility of newly hired employees. Right to Work Poster, and E-Verify Poster Applicants must be authorized to work in the United States. We are unable to sponsor work visas at this time. This is in accordance with applicable federal, state, and local laws, including Title VII of the Civil Rights Act, the Americans with Disabilities Act, the Age Discrimination in Employment Act, and the Genetic Information Nondiscrimination Act. If you need assistance or accommodation due to a disability during the application process, please contact our Talent Acquisition team at talentacquisition@riviamind.com.

Job DescriptionCompany Description In a world of vibrant color, INX stands out by blending art, science, and sustainability into every drop of ink we make. We’re globally recognized for our innovation, and we’re A Great Place to Work-Certified™ company! INX International is the third largest producer of inks in North America with full-service subsidiaries in Europe and South America. We offer a complete line of ink and coating solutions technology for commercial, packaging and digital applications. We expertly blend pioneering technology with a deep commitment to the environment. Dedicated to coloring a safe and sustainable future one print at a time, you can see our color chemistry on beverage cans, food and household packaging, clothing, banners, billboards and more. Investing in and protecting our employees is the key to our success. Our average employee has been with us 12 years, and we recognize the significant experience and the continuous dedication of our team members. We’re actively seeking new talent with new ideas as we continue to provide sustainable products, service and innovation to the printing and packaging markets. Join us in coloring a safe and sustainable future! Job Description This role offers a starting range of $24 to $30 per hour. Actual compensation will be based on qualifications such as experience, education, certifications, and skills, as well as geographic considerations. We are seeking an Inplant Ink Tech for our customer's site. The Inplant Ink Tech will be a liaison between INX and the customer. You will be responsible for: • Weighing up batches of ink, • Mixing batches of ink, • Coordinating inventory levels for press needs, • Receiving and rotating stock, • Performing color matching, • Performing inplant maintenanceQualifications To perform your job as expected, you will be required to: • Have a high school diploma or GED equivalent, • Have excellent verbal, written, reading comprehension and math skills, • Demonstrate proficiency with Microsoft Suite (MS Office) programs and other computer skills, • Demonstrate good organizational skills, • Be able to match colors effectively and pass a color vision test, • Have the ability to frequently lift up to 50 lbs In addition to these qualifications, we will consider it a plus if you: • Are able to cover other shifts if needed, • Are clean, professional and self-motivated, • Have flexibility with scheduling, • Have previous experience in the ink industry Additional Information We offer a competitive salary with excellent benefits including medical, dental, vision, life insurance, disability, pet insurance, HSA and FSA, 401(k), and more. Through our programs, which now include Paid Volunteer Time Off and Paid Parental Leave, we support the needs of our employees, their dependents, and their communities by providing a benefit package that is easy to understand, easy to access, and affordable for all our employees. Don’t just choose a job; choose a career that emphasizes employee growth in a safe, environmentally conscious culture. Embark on your Colorful Career with us! We require post-offer, pre-employment drug screens, physicals, and background checks. Equal Opportunity Employer: disability/veteran.

Job Description Company Summary Constellation Brands is a leading international producer and marketer of beer, wine, and spirits with operations in the U.S., Mexico, New Zealand, and Italy. Our mission is to build brands that people love because we believe elevating human connections is Worth Reaching For. It’s worth our dedication, hard work, and calculated risks to anticipate market trends and deliver for our consumers, shareholders, employees, and industry. This dedication is what has driven us to become one of the fastest-growing, large CPG companies in the U.S. at retail, and it drives our pursuit to deliver what’s next. Every day, people reach for brands from our high-end, imported beer portfolio anchored by the iconic Corona Extra and Modelo Especial, a flavorful lineup of Modelo Cheladas, and favorites like Pacifico and Victoria; our exceptional wine brands including The Prisoner Wine Company, Robert Mondavi Winery, Kim Crawford, Schrader Cellars, and Lingua Franca; and our craft spirits brands such as Casa Noble Tequila and High West Whiskey. As an agriculture-based company, we strive to operate in a way that is sustainable and responsible. Our ESG strategy is embedded into our business, and we focus on serving as good stewards of the environment, investing in our communities, and promoting responsible beverage alcohol consumption. We believe these aspirations in support of our longer-term business strategy allow us to contribute to a future that is truly Worth Reaching For. Position Summary The Senior Specialist, Learning Operations, plays a critical role in executing and optimizing the organization’s learning infrastructure, systems, and processes. This role is responsible for delivering seamless, high-quality learning operations that enable scalable, efficient, and data-driven talent development across the enterprise. Reporting to the Sr. Director, Talent Development & Management, this experienced individual contributor serves as a subject matter expert in learning operations, partnering with internal stakeholders to support program delivery, enhance learner experiences, and continuously improve systems, tools, and workflows. We are looking for a proactive person who is excited about making adult learning interesting and effective, drawn to making sense of data and technology for learners, and a strong, proactive team player. Responsibilities Learning Operations Execution Manage the day-to-day operations of enterprise learning programs, ensuring accurate, timely, and high-quality delivery Execute logistics for instructor-led, virtual, and digital learning experiences, including scheduling, enrollment, communications, and materials coordination Serve as a key operational partner to learning program managers and instructional designers Learning Systems & Technology Administer and optimize CBI’s Workday learning management system (LMS) and related learning technologies Configure courses, curricula, learning paths, and reporting structures within the system Troubleshoot system issues and partner with IT and vendors on enhancements, integrations, and upgrades Ensure data accuracy, compliance, and a strong end-user experience\ Vendor & Program Coordination Coordinate with external vendors, facilitators, and content providers to support program delivery Manage vendor logistics, including scheduling, materials, and communications Support contract tracking and vendor performance monitoring Data, Reporting & Insights Generate and analyze learning data and operational metrics (e.g., completions, participation, utilization) Produce regular and ad-hoc reports for stakeholders Identify trends and recommend improvements to enhance engagement and effectiveness Project Management & Process Improvement Identify inefficiencies and implement improvements to streamline learning operations Leverage automation and system capabilities to enhance scalability and consistency Contribute to the development and documentation of standard operating procedures and best practices Coordinate learning ops projects from planning through execution and completion Develop and maintain project plans, timelines, and deliverables for learning initiatives and system updates Track progress, identify risks, and proactively resolve operational issues to ensure on-time, high-quality delivery Stakeholder Support & Collaboration Partner with HR, Talent Development, and business stakeholders to support learning initiatives Provide guidance and support to learners, managers, and facilitators on learning systems and processes Act as a point of contact for operational questions and issue resolution Education and Experience Requirements Bachelor’s degree in Human Resources, Business Administration, Education, or a related field 3-5+ years of experience in learning operations, talent development, HR operations, or program coordination Proven experience administering enterprise LMS platforms (e.g., Cornerstone, Workday Learning, SuccessFactors) Strong project coordination and organizational skills with attention to detail Education and Experience Preferences Experience in a mid-to-large organization (5,000+ employees) Familiarity with learning experience platforms (LXP), content providers, and virtual learning tools Experience with reporting and data visualization tools (e.g., Power BI, Tableau) Key Skills and Competencies Strong operational execution and attention to detail Systems and technical proficiency (LMS and learning tools) Data analysis and reporting capability Problem-solving and process improvement mindset Effective communication and customer service orientation Ability to manage multiple priorities in a fast-paced environment Collaboration and stakeholder partnership ADA Physical/Mental/Workplace Requirements Occasional lifting up to 25 lbs. Sitting, working at desk/personal computer for extended periods of time Primary work environment is a professional corporate office Potential to travel 20% of the time Location Rochester, New York Additional Locations Chicago, Illinois Job Type Full time Job Area Human Resources The salary range for this role is: $82,400.00 - $123,600.00 This is the lowest to highest salary we in good faith believe we would pay for this role at the time of this posting. Our compensation is based on cost of labor. For remote locations or positions open to multiple locations, the pay range may reflect several US geographic markets, including the lowest geographic market minimum to the highest geographic market maximum. We may ultimately pay more or less than the posted range, and the range may be modified in the future. An employee’s pay position within the salary range will be based on several factors including, but not limited to, the prevailing minimum wage for the location, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, sales or revenue-based metrics, any collective bargaining agreements, and business or organizational needs. At Constellation Brands, it is not typical for an individual to be hired at the high end of the range for their role, and compensation decisions are dependent upon the facts and circumstances of each position and candidate. We offer comprehensive package of benefits including paid time off, medical/dental/vision insurance, 401(k), and any other benefits to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, or any other form of compensation that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law. Equal Opportunity Constellation Brands is committed to a continuing program of equal employment opportunity. All persons have equal employment opportunities with Constellation Brands, regardless of their sex, race, color, age, religion, creed, sexual orientation, national origin or citizenship, ancestry, physical or mental disability, medical condition (cancer or genetic characteristics), marital status, gender (including gender identity or gender expression), familial status, military or veteran status, genetic information, pregnancy, childbirth, breastfeeding, or related conditions (or any other group or category within the framework of the applicable discrimination laws and regulations).

Job DescriptionCLIENT HIGHLIGHTOur client is a a Fortune 500 global leader in energy technology focused on accelerating the transition to more reliable, affordable, and sustainable power. From advanced gas and wind turbines to the electrical grids that connect them, you will be at the forefront of innovation, helping power the world while reducing carbon emissions.This is an exciting opportunity to join a highly respected organization where your work will directly contribute to critical energy infrastructure and cutting-edge manufacturing operations. LOCATION Rochester, New York (Onsite) COMPENSATION $26-32.00 per hourSCHEDULE Monday – Friday, 40 hours per week A Shift: 7:30 AM – 4:00 PMCONTRACT TERM 6-month contract High likelihood of extension and potential for long-term opportunity!INTERVIEW PROCESS 2-step interview process: • 1st Round: Virtual (Teams or FaceTime), 15–20 minutes with Hiring Manager, • 2nd Round: Onsite interview with Hiring Manager and Warehouse SupervisorPOSITION OVERVIEW The Assembler will construct components and finished products according to blueprints, technical drawings, and work instructions. This role ensures all products meet quality and safety standards throughout the production process.This position is ideal for someone with strong attention to detail, manual dexterity, and the ability to work efficiently in a production-driven manufacturing environment.RESPONSIBILITIES • Prepare workspace by gathering required materials, tools, and test software, • Perform manual assembly of narrow-band radio products following work instructions, • Assemble components with precision, handling small parts and intricate wiring, • Review and follow Bill of Materials (BOM) and engineering drawings, • Inspect assembled products to ensure quality and accuracy, • Track and report defects, malfunctions, or quality issues, • Utilize SAP (ERP) system for job-related transactions, • Perform barcode scanning and maintain production tracking, • Operate test fixtures, run software, and troubleshoot failures, • Support manufacturing cells as needed, • Maintain a clean, organized, and safe work environment, • Communicate effectively with supervisors, engineers, and team membersREQUIRED QUALIFICATIONS, • High school diploma or equivalent, • Ability to read and interpret technical diagrams, manuals, and work instructions, • Strong attention to detail and hand-eye coordination, • Ability to use hand tools and basic computer systems, • Ability to work independently and as part of a teamPREFERRED QUALIFICATIONS, • Prior experience in electronics or manufacturing assembly, • Experience with hand tools and small power tools, • Familiarity with SAP or similar ERP systems, • Basic PC skills (Microsoft Office, Outlook, Teams, Excel, Word), • Ability to identify process improvements and maintain quality standardsPHYSICAL & WORK ENVIRONMENT, • Ability to visually inspect small components at close range, • Ability to lift or move objects up to 35 lbs, • Repetitive motion requiring high manual dexterity, • Ability to operate hand tools and computers, • Ability to remain stationary for extended periods (up to 50% of shift), • Ability to move within manufacturing areas as needed, • Exposure to manufacturing conditions including noise, heat, and machinery, • May work near chemicals, solder, or fumes (PPE and ventilation provided), • Required to wear safety gear (safety glasses, safety shoes, ESD smock), • Work performed in a production-paced environment with deadlines

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need while being able to focus on individual growth and improvement. We foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, team spirit and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking a Senior Architectural Designer with strong design, technical, and creative skills to provide architectural design with a focus on industrial and aviation facilities. The ideal candidate will have 4+ years of design experience and a professional degree in architecture from an accredited program. In this role, you will work under the direction of a project architect and/or project manager and will often coordinate technical design aspects with a multi-disciplinary team of designers and engineers as well as prepare presentation and design drawings and details. Key responsibilities include: Design & Technical Execution • Develop and coordinate architectural design solutions from concept through construction., • Apply advanced design knowledge to develop creative, functional, and sustainable solutions with the client’s goals and budget in mind. Practice Management • Collaborate with a team of design professionals to win and successfully execute projects., • Demonstrate strong ethics, teamwork, and client relationship management. Project Management • Deliver projects that meet contractual obligations, schedule, and financial goals., • Ensure project quality and client satisfaction throughout all phases. Programming & Analysis (Pre-Design) • Conduct on-site field work within active industrial and aviation facilities., • Utilize Autodesk Revit and 3-D point cloud scanning technology to develop accurate BIM models., • Research and understand the impacts of building codes, accessibility requirements, client-driven standards such as FM Global compliance., • Develop recommendations on project feasibility under the guidance of a licensed Architect. Project Planning & Design (Schematic Design) • Lay out building designs, review codes and regulations, and coordinate plans with consultants and engineers, working closely with a project architect., • Communicate design concepts clearly to clients and stakeholders. Project Development & Documentation • Prepare and coordinate detailed construction documents, including plans, details, schedules, and specifications, for permitting and bidding., • Coordinate with, and provide architectural support for, mechanical process, plumbing, HVAC, electrical, and structural engineering work. Construction Administration & Evaluation • Participate in on-site construction administration, including meetings with clients, contractors, and building officials., • Support punch lists, RFIs, and project closeout activities under the supervision of an Architect. Skills/Education/Experience • 4+ years of substantial experience developing architectural details and providing planning and design support during design development., • Experience gained through full-time employment under the supervision of a licensed Architect., • Professional degree in Architecture from an accredited program (Bachelor of Architecture, or Master of Architecture). Estimated Compensation Range and Benefits $80,000 - $95,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Company Information: Regional Transit Service (RTS) is a regional transit authority established by New York State with more than 1,000 employees who proudly serve customers and business partners in Monroe, Genesee, Livingston, Ontario, Orleans, Seneca, Wayne, and Wyoming counties. Recognized as one of the best-run transit systems in the nation, RTS partners with the community it serves to provide vital, safe, and sustainable transportation services to nearly 8 million people each year. We carry out our mission by connecting our customers to jobs, school, healthcare, shopping, and recreational activities every day. OVERVIEW: The Master Electrician is primarily responsible for the maintenance and installation of facilities electrical distribution systems and associated electrical equipment. The candidate will be responsible for repairs and improvements to electrical service and devices at RTS facilities in accordance with all appropriate codes and regulations. Secondary responsibilities include performing major and routine repairs typically encountered in maintaining building and shop equipment at a mass-transit facility. The candidate must also demonstrate a level of competency in the general building trades, including carpentry, plumbing, masonry, concrete finishing, and miscellaneous remodeling. The successful candidate will be assigned to complete all tasks within the scope of RGRTA/RTS Buildings and Grounds mechanical work. COMPENSATION: $41.48per hour Tentative Work Hours: Monday Friday, 6:00 AM 2:30 PM Why you should join the RTS Team! • Consistent weekly pay, • Career Longevity and opportunities for growth, • Work/life balance."Work to live, not live to work.", • Job security. Public Transportation is a long-term solution to climate change policy., • Cutting-edge internal technical training department. We support you., • Vehicles contain the latest technology. We provide the tools and equipment to help you succeed., • Collaborative and positive work environment with a culture that promotes your success. We focus on making you the best version of yourself! Other great benefits include: • Excellent HealthBenefits Medical, Dental, Vision, • Top compensation and pension plan, • Work boot & tool allowance, • On-site 24/7Fitness and Wellness Center, • Deferred Compensation, • Employee Assistance Program (Counseling, Health Advocacy, Financial & Legal Consultation, Health Coaching, Virtual Concierge, Discounts), • Well-Being Program, • Culture & Inclusion Council Click here to view current medical plan rates! ESSENTIAL FUNCTIONS: • Connect wires to circuit breakers, transformers, or othercomponents., • Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance withcodes., • Advise management on whether continued operation of equipment could behazardous., • Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety ofsystem., • Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and localcodes., • Prepare sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safetycodes., • Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and testlamps., • Install ground leads and connect power cables to equipment, such asmotors., • Repair or replace wiring, equipment, and fixtures, using hand tools and powertools., • Work from ladders, scaffolds, powered lifts, and roofs to install, maintain or repair electrical wiring, equipment, andfixtures., • Place conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits betweenboxes., • Fasten small metal or plastic boxes to walls to house electrical switches oroutlets., • Perform physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavyobjects. REQUIREMENTS: • Must have a full set of tools to perform all jobsassigned., • Must be able to lift at least 75 lbs., • A valid NYS driver's license and clean driving record required., • Must obtain a New York State CDL Class Bpermitwith passenger and air brake endorsement prior to start date., • Current license as a Master Electrician (Three-phase) issued by the City of Rochester Electrical Examining Board EDUCATION & EXPERIENCE: • High School Diploma or Equivalent (GED), • Candidate must have met all requirements as listed above. KNOWLEDGE, SKILLS, & ABILITIES: • The ability to assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools, • The ability to diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem, • Proficient computer skills, including basic Microsoft Office, Trapeze EAM, Adobe Acrobat Reader, • Excellent verbal and communication skills, • Strong time management skills PHYSICAL DEMANDS AND WORK ENVIRONMENT: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear.The employee frequently is required to stand, walk, use hands to finger, handle, or feel and reach with hands and arms.The employee is occasionally required to sit, climb, or balance and stoop, kneel, crouch or crawl.The employee must frequently lift and/or move up to 20 pounds and occasionally lift and/or move up to 75 pounds.Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.While performing the duties of this job, the employee frequently works in outside weather conditions.The employee is occasionally exposed to wet and/or humid conditions, fumes, or airborne particles, toxic or caustic chemicals and vibration.The employee works near moving mechanical parts.The employee is occasionally exposed to risks. The noise level in the work environment is usually moderate to loud. Additional Information: Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result. RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Job Description Position Overview: This is a safety-sensitive, first-line supervisory position responsible for performing a variety of functions relative to the safe and efficient maintenance and repair of all RTS revenue and non-revenue vehicle maintenance, and several RTS buildings and facilities. Work is performed under the general supervision of the Manager of Fleet Maintenance. This position is expected to open and close the Service Building operations and oversee Service Building employees on weekends, in addition to the Garage. At Regional Transit Service (RTS), we keep our community moving. With more than 1,000 employees across 8 counties, we provide safe, reliable, and sustainable transportation for nearly 8 million riders every year. Join our team and be part of one of the nation's best-run transit systems. Starting Pay:$31.20 - $44.56 per hour based on skills and experience Available Shift: Friday, Saturday, Sunday, Monday 8:00 pm- 6:30 am Union Representation:Teamsters Local 118 Why Work With Us • RTS Pension Plan A monthly lifetime income that grows as you continue working at RTS. Your benefit is based on your years of credited service and the pension multiplier and is not affected by investment gains or losses. • Excellent pay and union security, • Training provided stay current with the latest technology, • Strong benefits package medical, dental, vision, tool and boot allowance, fitness center, and more Benefits Include: • Staying Healthy: Medical, Dental (currently free) and Vision (currently free), Flexible Spending Account (FSA), • Feeling Secure: Disability Insurance, Pension Plan, NY State Deferred Compensation Plan, Life & Accidental Death & Dismemberment (AD&D) Insurance, Accident Insurance, Group Specified Disease Insurance and Hospital Insurance, • Work-Life Balance: Paid Time Off (Vacation, Sick, Personal), Employee Assistance Program, Paid Holidays, On-site Fitness Center open 24/7, Employee Wellness Program, Culture & Inclusion Council, BJ's Wholesale Club Discount, and more! Click here to view current medical plan rates! Knowledge, Skills, and Abilities: • Knowledge of established fleet mechanical maintenance and preventative maintenance practices and protocols., • Working knowledge of the bus propulsion, suspension, electrical, pneumatic operations and repairs, scheduling, and reporting., • Ability to read, understand, and communicate bus build prints and schematics., • Ability to work with computers and Microsoft Office software, Word, Excel, and Access., • Ability to communicate clearly and concisely orally and in writing., • Ability to establish effective working relationships with co-workers and subordinate staff., • Good judgment., • Ability to make sound, well-reasoned decisions based on quantitative and qualitative findings., • Dependability, tact, diplomacy., • Physical ability commensurate with the demands of the position. Position Requirements: • Must obtain a NY State Commercial Driver's License, Class B, and any applicable endorsements within 6-months from the hire date (Required to obtain Class B permit prior to start date. Paid training provided to obtain Class B License)., • English proficiency required for safety-sensitive communication, manuals, and job instructions, • Excellent Customer Service skills, including but not limited to the ability to clearly and effectively communicate with customers, are a must. Consideration Will Be Given To The Following Factors: • Education attained beyond high school., • ASE Certification., • Mechanical and Technical Repair Background/Experience., • Relevant Previous Work Experience., • Relevant Supervisory Experience (may include responsibility for performance review and disciplinary actions). ADDITIONAL INFORMATION: Rochester Genesee Regional Transportation Authority (RGRTA) has a zero-tolerance drug and alcohol policy for all employees in accordance with state and federal law. All internal and external applicants will be required to undergo drug testing before employment and will be subject to further drug and/or alcohol testing throughout their employment in accordance with the Department of Transportation (DOT) and the Federal Transit Administration (FTA) regulatory requirements. Rochester Genesee Regional Transportation Authority (RGRTA) is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship and/or immigration status, sex, sexual orientation, gender identity, pregnancy, age, veteran status, disability, genetic information, or any other protected characteristic under applicable federal or state law. RGRTAwill make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. Pursuant to Federal Transit Administration regulations, all applicants for employment in safety-sensitive positions must be given a pre-employment drug test. An applicant may not be assigned safety-sensitive functions unless the individual has a verified negative test result.RTS is required by law to test for various substances, including cocaine, amphetamines, opioids, PCP and marijuana metabolites. Please be advised that marijuana stays in the system for an extended period of time, sometimes more than 30 days, and can cause a positive test result long after use.

Are you looking for a company with unlimited compensation opportunity, weekly pay, and advancement to management roles? Leaf Home Water Solutions, a division of Leaf Home is looking to grow our team of Outside Sales Representatives TODAY! Why Work with Leaf Home Water Solutions? Working with Leaf Home Water Solutions is more than just another job - it is an opportunity to earn a sizable and consistent income, the freedom to grow your career on your terms, and a chance to put down roots in your community. We will supply you with pre-qualified leads and the necessary tools for success so you can set out and start earning!! While you’re helping homeowners by providing clean, healthy and sustainable water for their families and increasing the performance of their plumbing and water-oriented appliances, you’ll be backed by the support of Leaf Home and LeafFilter, the largest gutter protection company in North America. Demonstrate a product that sells itself with pre-set appointments that are provided to you! Our highly successful, multi-channel lead generation platform provides high-converting, and quality pre-set sales appointments. As a 3508 Direct Sales Representative, you can generate your own sales appointment. Best of all most sales close in an hour or less. What’s in it for me? • Prequalified scheduled leads – We provide all the quality leads you to want; you close the sale, • Short sales cycle – Appointments take one hour including paperwork with the install as soon as the same day, • Superior product – Our products are factory direct…there is no comparison!, • Financial Freedom – Earn an average of $75-100k+ in the first year…Our top rep earned $250k in 2024!!, • Weekly Pay – We pay weekly through direct deposit, so no more waiting weeks or months to be paid, • Advancement – Endless opportunity for growth and advancement (95% of our Sales Operations Managers start as Sales Reps Essential Duties and Responsibilities: • Meet with prospective customers using established sales methodology to educate, consult, inform, and sell!, • Responsible for using established sales methodology to sell customers the proper product that fits their needs, • Develop a rapport and conversation with the customer to facilitate one visit close, • Leverage industry-leading product samples, support, and technology to assist you in closing the sale, • Commitment to an outstanding customer service experience from beginning to end Minimum Skills and Competencies: • Excellent communication and organizational skills, • Energetic and engaging interpersonal skills with the drive to succeed, • Ability to overcome objections in the sales process, • Travel within the assigned territory based on provided and self-generated leads, • Ability to operate successfully as an independent 3508 direct sales representative Are we your company? Life is full of uncertainties, but whether you provide clean, safe, and sustainable drinking water to your family shouldn’t be one of them. Leaf Home Water Solutions installs solutions that provide the best water for families and their homes. As such, we strive to assemble a team of caring and compassionate individuals that share our mission of empowering homeowners. From our corporate team to our local teams, we have crafted a team of the very finest… and we hope you’ll be joining that team!

Join our team, where your expertise will drive cutting-edge solutions, address complex technical challenges, and uphold the highest standards of precision and safety. We are seeking a Precision Assembler to join our Operations team in Rochester, NY. Bring your passion and commitment to Navitar, where we are curious, collaborative, persistent, and confident, where safety and quality guide every step of our journey. Grow with us as we solve complex challenges, inspire confidence, and drive excellence in manufacturing. KEY RESPONSIBILITIES: • Perform functional and optical testing of interferometers using precision metrology tools., • Follow detailed manufacturing procedures, work instructions, and quality standards., • Maintain cleanroom protocols and ensure contamination control during all assembly processes., • Collaborate with engineering to support process development, validation, and continuous improvement., • Document work performed with extreme attention to detail., • Maintain traceability of components and assemblies., • Support root cause analysis and corrective actions for production issues., • Maintain required training certifications and adhere to safety and quality. REQUIRED SKILLS AND COMPETENCIES: • High School Diploma or GED, • 3-5 years of hands-on production manufacturing/operations, • Solid mathematical aptitude, • Ability to read and interpret technical documentation, including Bill of Material (BOM), schematics and optical layouts, • Excellent manual dexterity and attention to detail to handle delicate optical components, • Collaborative team player with a focus on problem-solving, • Ability to work independently and to be flexible/adaptable with shifting priorities, • Organized, conscientious and focused, • Basic computer skills for data entry, documentation, and communication, • Capable to lift up to 20 lbs. and standing for extended periods of time, • Driven to achieve with a commitment to quality with a safety-first mindset PREFERRED SKILLS AND EXPERIENCE: • Experience in manufacturing precision optical or laser-based instruments, • Experience working in a Clean Room environment (ISO Class 7 or better preferred), • Knowledge of interferometry principles, optical testing, and troubleshooting Are you ready to expand the boundaries of possibility, simplify the complex, and embody the values that define our success? We welcome your unique perspective and invite you to join us! We offer competitive compensation, benefits, retirement (401k) and paid time off programs. Compensation and position level will be set based on experience. *Due to the nature of Navitar programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. Compensation Employee Type: Hourly Currency: USD Salary Minimum: 40,000 Salary Maximum: 65,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit https://www.ametek.com/careers for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Rochester

Our client, a leader in scientific manufacturing, is seeking an Automation Technician to join their team. As an Automation Technician, you will be part of the Manufacturing Support Department supporting production and maintenance teams. The ideal candidate will demonstrate strong troubleshooting skills, attention to detail, and a proactive approach to problem-solving, which will align successfully in the organization. Job Title: Automation Technician Location: Rochester, NY Pay Range: $24 - $28hr Shift: 10:30 PM - 7:00 AM What's the Job? • Perform immediate and preventative maintenance on manufacturing equipment to ensure continuous production., • Identify, document, and implement opportunities for process improvements and operational efficiencies., • Collaborate with maintenance and engineering teams to troubleshoot and resolve equipment issues promptly., • Work with advanced manufacturing systems including robotics, vision systems, ultrasonic welding, and printing technologies., • Maintain a safe work environment by adhering to all safety standards and procedures. What's Needed? • High school diploma or equivalent required; technical certification in Engineering Technology, Electronics, or related field preferred., • At least 2 years of experience in manufacturing engineering, maintenance, or a related role., • Experience with PLC systems, SCADA, and automated manufacturing equipment is preferred., • Strong troubleshooting skills across mechanical, electrical, and automated systems., • Ability to read technical drawings, P&IDs, and equipment documentation. What's in it for me? • Opportunity to work with advanced manufacturing technologies in a dynamic environment., • Engage in continuous improvement initiatives that make a tangible impact on operations., • Collaborate with a dedicated team committed to safety and quality., • Gain valuable experience in a scientific manufacturing setting., • Work in a supportive environment that values diversity and innovation. If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells. ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2023 ManpowerGroup was named one of the World's Most Ethical Companies for the 14th year - all confirming our position as the brand of choice for in-demand talent.

Our client is seeking an administrative professional to join their team to support coverage for two weeks. As an Administrative, you will be part of supporting daily operational tasks and administrative functions. The ideal candidate will demonstrate strong organizational skills, attention to detail, and excellent communication abilities, which will align successfully in the organization. Job Title: Administrative Location: Rochester, NY Pay Range: $17.50 Shift: Monday - Friday 8am-5pm What's the Job? • Perform routine medical laboratory tests for diagnosis, treatment, and prevention of disease., • Work under the supervision of a medical technologist to ensure accurate test processing., • Provide high-level administrative support by conducting research and preparing statistical reports., • Prepare correspondence and greet visitors in a professional manner., • Arrange conference calls and schedule meetings to facilitate smooth operations. What's Needed? • No prior experience required; entry-level candidates are encouraged to apply., • Strong organizational and multitasking skills., • Excellent communication and interpersonal abilities., • Ability to work effectively in a team environment., • Basic proficiency with office software and administrative tools. What's in it for me? • Opportunity to gain experience in a healthcare environment., • Supportive team and professional development opportunities., • Competitive hourly pay rate., • Two-week employment with potential for additional coverage., • Work schedule Monday through Friday, 8am to 5pm. Upon completion of waiting period associates are eligible for: • Medical and Prescription Drug Plans, • Dental Plan, • Supplemental Life Insurance, • Short Term Disability Insurance, • 401(k) If this is a role that interests you and you'd like to learn more, click apply now and a recruiter will be in touch with you to discuss this great opportunity. We look forward to speaking with you! About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells. Manpower® is a global leader in contingent staffing and permanent resourcing, providing companies with strategic and operational flexibility and creating talent at scale. Our specialized recruiting teams assess and guide talent into meaningful, sustainable employment, while our PowerSuite technology enables deeper insight and smarter matching, helping candidates find opportunities that align with their strengths, experience, and career goals. In this constantly shifting world, our flexible workforce solutions provide companies with the business agility needed to succeed. Manpower is part of the ManpowerGroup® (NYSE: MAN) family of brands, which also includes Experis, Talent Solutions and Jefferson Wells. For more information about Manpower, follow us on LinkedIn, Facebook, X and Instagram.

Job Description At Ormazabal we work to transform the electricity grid into an infrastructure of the future: more reliable, resilient and sustainable: we are experts in customised, high-tech electrical solutions. We design and manufacture solutions aimed at digitalizing the electrical grid to integrate more renewable energy generation, enable more sustainable mobility and guarantee the power supply to buildings and infrastructures with critical energy needs At Ormazabal we develop the technology needed to make this world a more electric place. That is why we are passionate about what we do. Because we know that we contribute to the construction of a more efficient and sustainable energy model. A better future for generations to come. With us you will find a space to design your future and transform everyone's future. JOB DESCRIPTION We are looking for a After Sales Service Technician in Rochester, NY. ROLE DESCRIPTION: • Coordination of on-site assemblies., • Commissioning of primary and secondary cubicles. Configuration and tests (FAT and SAT) of protection and control equipment. Configuration of communication’s equipment., • On site Customer training., • Maintenance of cubicles and protection and control systems. Non-conformities resolution., • Customer Support Service, remote and on field. FUNCTIONS: • Direct contact between clients and factories/OSU for the resolution of customer’s non- conformities., • Answers and gives technical assistance to market/clients for non-conformities of ORMAZABAL’s products, solving them on site and contribute the conclusions of repair works (with the objective of coordinating or developing the most efficient corrective), • Provide product training to all customers’ staff REQUIREMENTS: • Background degree: Electro-mechanical knowledge, • 2-3 years experience, • Vocational Training/High Level Technical Degree, • Social skills, flexible, leader, team work, commited, • Ability to handle and solve unexpected situations, • Able to travel BENEFITS: • Medical, • Dental, • Vision, • 401k, • HSA You will join an innovative company that leads the industry where you can develop your professional career.