Technical specialist jobs in Brownsville, TexasCreate job alerts

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE The Maintenance Technician, Mechanical, conducts daily mechanical maintenance execution activities, ensuring safe, quality work practices are maintained while maximizing availability of equipment across the facility. The Senior Technician is part of the Mechanical extended leadership team and will have to provide coverage and support to the Supervisor during times of absence or high volume. This position is located in Brownsville, TX. Check out our RGV Spotlight Video to learn more about Brownsville and the Rio Grande Valley!Key Responsibilities • Demonstrate proactive safety attitude at all times., • Always uses safe work practices and follows NextDecade lifesaving rules and permitting processes., • Maintains a high focus on safety and wellbeing of execution team, leads by example to set and maintain a positive safety culture of compliance, and continuous improvement for Apprentices and Contractors, • Engages and communicates effectively with other departments such as Engineering, Operations, Safety, Procurement, Training, Planning, Specialist Vendors and Contractors upholding the One-Team approach, • Initial support and continued review of preventative & corrective Maintenance Plans., • Participate in the reviewing of maintenance documentation, such as WI’s, JSA’s and SWMMs, Permitting, red lining of documents., • Participate in the mechanical maintenance execution activities of all breakdowns, corrective, and preventative maintenance in the facility., • Provide support to turnarounds as required., • Responsible to safely complete all assigned activities to a high standard., • Perform Permit Holder requirements for the execution of work at RGLNG., • Maintain personal training and competency compliance., • Actively participate and actively all the required maintenance meetings, including HSSE meetings, prestart, tailgates, etc. Minimum Requirements, • High school diploma or GED., • Experienced in the execution of mechanical maintenance activities., • Competent at interpreting Engineering Drawings and Documentation., • Exceptional working knowledge of CMMS systems (SAP or Similar), • Experience developing and reviewing critical Maintenance procedures., • Exceptional working knowledge of an MOC process., • Experience in frontline leadership during Turnarounds., • Relevant LNG Mechanical Pipefitter maintenance experience including Fabrication and/or repair of piping, etc. using various welding processes as required (SMAW, GTAW, GMAW) Blinding of pipes, vessels, tanks, exchangers, etc. to prepare equipment for operations and maintenance., • Mechanical LNG experience including Turbo machinery, compressors, loading arms, PSV’s, pumps, motors, vessels, valves, actuators, fin fans and flange management a must., • Computer literate in word processing, spreadsheet, and database applications., • Excellent analytical and problem-solving skills., • Must have a “hands-on” method of working., • Participate as a member of the Emergency Response Team (ERT) to support on-site emergencies., • Ability to get Transportation Worker Identification Credentials (TWIC).Preferred Requirements, • Technical degree in Industrial Mechanical or similar and NCCER (Millwright/Pipefitter/Boilermaker)., • 5+ years Hydrocarbon/Petrochemical experience in a Mechanical Maintenance Technician role.Work Environment & Physical Demands with or without reasonable accommodations, • Operates in a complex construction environment., • Work is conducted both in a controlled indoor environment using computer systems such as DCS, and outdoors in the field, often under challenging weather conditions for extended periods., • Must be able to wear all mandatory/necessary PPE equipment to perform job functions., • Ability to move throughout all areas of the facility, including being physically capable of traveling to a designated muster point during emergency situations., • Must be able to clearly communicate, in the English language, with others via radio, phone, and verbal methods., • Exposure to indoor and outdoor weather conditions., • Not necessarily protected from weather and temperature changes. Exposure to hot, cold, wet, humid, or windy weather conditions., • Exposure to moving mechanical parts. Physical Requirements: Must be able to lift up to 40 pounds unassisted and push/pull with up to 50 pounds of force., • Required to grip objects with up to 50 pounds of force., • Frequent standing, walking, and balancing, including climbing stairs and ladders., • Regular reaching, bending, stooping, handling, and spinal twisting.

Job DescriptionJob Title: Controls SpecialistJob Description As a Controls Specialist, you will own and execute industrial automation projects, collaborating with engineers, specialists, and technicians from different groups. You will develop and upgrade data acquisition and control systems, provide technical support, and guide controls technicians and other non-controls engineering groups. Your role will involve leading technicians or contractors, commissioning new hardware, and actively performing continuous improvements for team processes and quality. Responsibilities • Develop and upgrade data acquisition and control systems., • Provide technical support and guidance for controls technicians., • Lead and manage technicians and contractors efficiently., • Commission new hardware and perform continuous improvements for team processes., • Prioritize daily tasks, including risk mitigation on current and upcoming projects., • Draft and redline drawings in Electrical and Fluids Schematics., • Act as a liaison between Tooling Engineering and Automation & Controls during the design and build stages., • Program PLCs and HMIs according to engineering design., • Analyze data to assess the function of electrical systems., • Assist in the design and analysis of experiments to evaluate test articles.Essential Skills, • PLC programming, automation, and electrical processes., • Experience in robotics, troubleshooting, and quality assurance., • Proficiency in risk analysis, programming, and AutoCAD., • Quality control and design capabilities.Additional Skills & Qualifications, • Occupational trade school qualification in an instrumentation or electrical-based field., • Knowledge of NFPA 70, NFPA 70E, NFPA 79, and UL508A codes., • Strong communication skills and a passion for advancing the commercial space industry., • Ability to rapidly adapt roles and manage multiple priorities., • Experience with high-reliability processes and documentation practices., • Experience in programming PLC and HMI, as well as data acquisition and control hardware., • Understanding of engineering principles behind electronic equipment and instrumentation., • Experience designing and installing control systems in hazardous areas., • General schematic capture and PCB design experience., • Experience with industrial bus protocols and connectorization standards., • Hands-on experience with analog electronic systems, process integration, and mechatronic systems., • Exposure to programming languages such as C/C++, Python, and JavaScript. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Brownsville,TX. Application Deadline This position is anticipated to close on Jan 24, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE The Maintenance Technician, Mechanical is responsible for conducting the safe execution of mechanical maintenance activities, including breakdowns, corrective and preventative maintenance, at the RGLNG facility. This position is located in Brownsville, TX. Check out our RGV Spotlight Video to learn more about Brownsville and the Rio Grande Valley!KEY RESPONSIBILITIES • Demonstrate proactive safety leadership to the entire Maintenance team., • Responsible for the safety and wellbeing of execution team, leads by example to set and maintain a positive safety culture of compliance and continuous improvement., • Maintain a positive HSSE reporting culture ensuring that all occurrences provide a learning and improvement opportunity., • Be an active and engaged team member ensuring a One-Team approach., • Proactively engages and supports all RGLNG personnel including Production, Engineering, Instrument & Controls, Electrical, Plant Services, Specialist Vendors and Contractors upholding the One-Team approach, • Safely execute all mechanical maintenance activities at the RGLNG facility including breakdowns, corrective and preventative maintenance., • Perform Permit Holder requirements for the execution of work at RGLNG., • Complete all required maintenance reporting, including updating the CMMS system as following company work processes., • Ensure personal training and competency is up to date., • Provide support during the Major Maintenance Turnaround events as required., • Participate as a member of the Emergency Response Team (ERT) to support on-site emergencies.REQUIREMENTS, • Technical degree in Industrial Mechanical or similar or NCCER (Millwright/Pipefitter/Boilermaker)., • 5+ years of mechanical experience required., • 5+ years Industrial Facility experience in Maintenance role preferred., • Physical Requirements: Must be able to lift up to 40 pounds unassisted and push/pull with up to 50 pounds of force., • Required to grip objects with up to 50 pounds of force., • Frequent standing, walking, and balancing, including climbing stairs and ladders., • Regular reaching, bending, stooping, handling, and spinal twisting., • Use of hands, arms, and legs to lift, push, and pull machinery and mechanical components.PREFERRED, • Experienced in the execution of mechanical maintenance activities., • Competent at interpreting Engineering Drawings and Documentation., • Exceptional working knowledge of CMMS systems (SAP or Similar), • Experience developing and reviewing critical Maintenance procedures., • Exceptional working knowledge of an MOC process., • Experience in frontline leadership during Turnarounds., • Relevant LNG Mechanical Pipefitter maintenance experience including Fabrication and/or repair of piping, etc. using various welding processes as required (SMAW, GTAW, GMAW) / Blinding of pipes, vessels, tanks, exchangers, etc. to prepare equipment for operations and maintenance.

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE Maintenance Senior Technician, Electrical, provides guidance, mentoring and oversight of Electrical maintenance execution activities including personnel, with the aim of ensuring safe, quality work practices while maximizing availability of equipment across the facility. The Senior Technician is part of the electrical extended leadership team and will have to provide coverage and support to the Supervisor during times of absence or high volume. KEY RESPONSIBILITIES • Demonstrate proactive safety principles to the Maintenance team., • Guidance of safety and wellbeing of execution team members, leads by example to set and maintain a positive safety culture of compliance and continuous improvement., • Mentor and assist Maintenance team members in technical aspects of the role., • Provide communication and assistance to all maintenance disciplines as required, not just the Electrical team, including Instrumentation, Mechanical, Plant Services, Specialist Vendors and Contractors upholding the One-Team approach, • Stakeholder in the execution KPIs, and provide ongoing support of the Integrated Activity Planning & Scheduling process for RGLNG ., • Assist the Supervisor to lead the allocation of work and execution for all activities including SCE, Statutory, and Federal Regulations and manage associated compliance processes including deferals, backlog etc., • Assist the Supervisor in managing Electrical maintenance execution activities of all breakdown, corrective and preventative maintenance in the facility, • Lead Electrical teams in the execution of the Major Maintenance of plant and unit shutdowns, • Responsible in assisting supervisor to safely complete all planned activities on the locked schedule, maximizing tooltime and minimizing cost & deferrals., • Stakeholder in the review of materials and parts optimization, • Demonstrate continuous improvement, value adding programmes and cost saving intiatives, • Provide coverage for the Maintenance Supervisor as required., • Participate in and sometimes run maintenance execution meetings, including HSSE meetings, pre-starts, work allocation tasks, toolboxes etc., • Complete safety audits and quality workmanship inspections. Minimum Requirements:, • High school diploma or GED., • 10+ years Hydrocarbon/Petrochemical facility experience in an Electrical maintenance execution role., • Current Licenced Electrician Qualification in Texas or the ability to obtian as per TDLR, • Current Low Voltage Rescue and Resusitation certificate., • Competent at interpreting engineering drawings and documentation i.e. P&ID, ISO, GA, Logic, Control Narratives, Cause & Effect, Loop & Wiring, etc., • Must have experience with the testing and inspection of Safety Critical Elements (SCE), Statutory and Federal Regulatory compliance., • Experience and working knowledge of CMMS systems (SAP or similar)., • Ability to lead red-lining critical Maintenance procedures., • Knowledge of an Management of Change (MOC) process., • Experience with leadingmaintenance groups activities during Turnarounds., • Experience with Electrical Equipment in Classified Areas (EEHA) inspections and repairs., • Strong experience with Electrical fault finding and diagnosis, Lighting maintenance, Electric disconnection/reconnections related to equipment access, Motor Control Centre (MCC) routine maintenance., • Experience in High & Medium Voltage switchgear/transformer/motor maintenance., • Strong Experience with UPS / Backup power supply Maintenance and Isolations., • Experience with LV System and equipment maintenance, • Experience with Leading Electrical Lock Out Tag Out (LOTO) equipment isolation work including LOTO in motor control centers (MCC), motors, pumps, and compressors, and in accordance with Owner PTW System., • Must be experienced in Permit to Work systems and processes., • Must be experienced in writing/reviewing Work Instructions, • Computer literate in word processing, spreadsheet, and database applications., • Excellent analytical and problem solving skills., • Must have a “hands-on” method of working., • Ability to get TransportationWorker Identification Credentials (TWIC)., • Participate as a member of the Emergency Response Team (ERT) to support on-site emergencies. Preferred Qualifications:, • Technical degree in Electrical Engineering or similar and NCCER preferred., • Qualifications or certificate for Electrical Equipment in Classified Areas, inspections and repairs., • Qualifications for Medium or High voltage switching and vendor specific equipment. Work Environment & Physical Demands (with or without reasonable accommodations), • Operates in a complex construction environment., • Work is conducted both in a controlled indoor environment using computer systems such as DCS, and outdoors in the field, often under challenging weather conditions for extended periods., • Must be able to wear all mandatory/necessary PPE equipment to perform job functions., • Ability to move throughout all areas of the facility, including being physically capable of traveling to a designated muster point during emergency situations., • Must be able to clearly communicate, in the English language, with others via radio, phone, and verbal methods., • Exposure to indoor and outdoor weather conditions., • Not necessarily protected from weather and temperature changes. Exposure to hot, cold, wet, humid, or windy weather conditions., • Exposure to moving mechanical parts. Physical Requirements: Must be able to lift up to 40 pounds unassisted and push/pull with up to 50 pounds of force., • Required to grip objects with up to 50 pounds of force., • Frequent standing, walking, and balancing, including climbing stairs and ladders., • Regular reaching, bending, stooping, handling, and spinal twisting.

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE Maintenance Senior Technician, Instrumentation, provides guidance, mentoring and oversight of instrumentation maintenance execution activities including personnel, with the objective of ensuring safe, quality work practices while maximizing availability of equipment across the facility. The Senior Technician is part of the electrical extended leadership team and will have to provide coverage and support to the Supervisor during times of absence or high volume.KEY RESPONSIBILITIES • Demonstrate proactive safety principles to the Maintenance team., • Guidance of safety and wellbeing of execution team members leads by example to set and maintain a positive safety culture of compliance and continuous improvement., • Mentor and assist Maintenance team members in technical aspects of the role., • Provide communication and assistance to all maintenance disciplines as required, not just the Instrumentation team, including Electrical, Mechanical, Plant Services, Specialist Vendors and Contractors upholding the One-Team approach, • Stakeholder in the execution KPIs and provide ongoing support of the Integrated Activity Planning & Scheduling process for RGLNG., • Assist the Supervisor to lead the execution activities for all SCE, Statutory, and Federal Regulations and manage associated compliance processes including deferrals, backlog etc., • Assist the Supervisor in managing instrumentation maintenance execution activities of all breakdowns, corrective and preventative maintenance in the facility, • Lead Instrumentation teams in the execution of the Major Maintenance of plant and unit shutdowns, • Responsible in assisting Supervisor to safely complete all planned activities on the locked schedule, maximizing tool time and minimizing cost & deferrals., • Stakeholder in the review of materials and parts optimization, • Demonstrate continuous improvement, value adding programmes and cost saving initiatives, • Provide coverage for the Maintenance Supervisor as required., • Participate in maintenance execution meetings, including HSSE meetings, pre-starts, work allocation tasks, toolboxes etc., • Complete safety audits and quality workmanship inspections.Minimum Requirements:, • High school diploma or GED., • 10+ years Hydrocarbon/Petrochemical facility experience in an Instrument maintenance execution role., • Current Instrument Qualification in Texas, • Competent at interpreting engineering drawings and documentation i.e. P&ID, ISO, GA, Logic, Control Narratives, Cause & Effect, Loop & Wiring, etc., • Subject Matter Expert (SME) for all Instrumentation Maintenance activities., • Competent at interpreting Engineering Drawings and Documentation i.e. P&ID, ISO, GA, Logic, Control Narratives, Cause & Effect, Loop & Wiring, etc, • Must have experience with critical function testing and inspection of Safety Critical Elements (SCE) to meet Statutory and Federal Regulatory compliance., • Experience and working knowledge of CMMS systems (SAP or Similar), • Ability to lead red-lining and reviewing critical Maintenance procedures., • Knowledge of a Management of Change (MOC) process., • Experience in leading maintenance teams during Turnarounds., • Relevant LNG control system experience including Integrated Control & Safety Systems (DCS / SIS), PLC’s, etc, • Relevant LNG instrumentation maintenance experience including Flow Computers, analyzers, gas turbines, fire & gas detection systems, control valves, anti surge control, and field instrumentation is a must., • Knowledge of communication network protocols such as Ethernet/IP, Modbus RTU or TCP, OPC, HART, etc, • Computer literate in word processing, spreadsheet, and database applications., • Excellent analytical and problem solving skills., • Must have a “hands-on” method of working., • Ability to get Transportation Worker Identification Credentials (TWIC)., • Participate as a member of the Emergency Response Team (ERT) to support on-site emergenciesPreferred Qualifications:, • Technical degree in Instrumentation or similar and NCCER preferred., • Hold NFPA 70E qualificationsWork Environment & Physical Demands (with or without reasonable accommodations):, • Operates in a complex construction environment., • Work is conducted both in a controlled indoor environment using computer systems such as DCS, and outdoors in the field, often under challenging weather conditions for extended periods., • Must be able to wear all mandatory/necessary PPE equipment to perform job functions., • Ability to move throughout all areas of the facility, including being physically capable of traveling to a designated muster point during emergency situations., • Must be able to clearly communicate, in the English language, with others via radio, phone, and verbal methods., • Exposure to indoor and outdoor weather conditions., • Not necessarily protected from weather and temperature changes. Exposure to hot, cold, wet, humid, or windy weather conditions., • Exposure to moving mechanical parts. Physical Requirements: Must be able to lift upto 40 pounds unassisted and push/pull with up to 50 pounds of force., • Required to grip objects with up to 50 pounds of force., • Frequent standing, walking, and balancing, including climbing stairs and ladders., • Regular reaching, bending, stooping, handling, and spinal twisting.

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE Lead, Maintenance Services provides leadership and operational oversight for maintenance support activities across facilities. This role ensures that all maintenance work is performed safely, efficiently, and fosters a culture of continuous improvement in facilities maintenance. KEY RESPONSIBILITIES • Demonstrate proactive safety leadership to the Maintenance Support Services team., • Responsible for the safety and wellbeing of the Maintenance Services execution team, leads by example to set and maintain a positive safety culture of compliance and continuous improvement., • Ensure competent labor availability to cover critical facilities maintenance activities., • Provide oversight and leadership to all maintenance disciplines as required, not just the Services team, including Instrument & Controls, Electrical, Mechanical, Specialist Vendors and Contractors upholding the One-Team approach, • Stakeholder in the development, implementation, and ongoing support of the Integrated Activity Planning & Scheduling process for RGLNG, • Provide input and continued review of Preventative & Corrective Maintenance Plans aligned to the equipment selected for this facility., • Lead the execution activities for all SCE, Statutory, and Federal Regulations and manage associated compliance processes including deferrals, backlog etc., • Accountable for the Maintenance Support Services execution activities of all breakdown, corrective and preventative maintenance in the facility (grounds, janitorial, HVAC, elevators, buildings), • Provide support to the leadership of the Turnaround Team prior and during Turnarounds, • Lead site teams in the execution of the Major Maintenance of plant and unit shutdowns, • Responsible to safely complete all planned activities on the locked schedule, maximizing tool time and minimizing cost & deferrals., • Stakeholder in the review of materials and parts optimization ensuring compliance with environmental requirements., • Demonstrate continuous improvement, value adding programmes, and cost saving initiatives., • Provide coverage for the Maintenance Superintendent as required., • Deliver the required maintenance execution meetings, including HSSE meetings, pre-starts, work allocation tasks, toolboxes etc., • Attend execution Workfront's on a daily basis, • Participate as a member of the Emergency Response Team (ERT) to support on-site emergencies. REQUIRED QUALIFICATIONS, • HS Diploma/GED, • Minimum 10 years of maintenance experience in LNG, Oil & Gas, or Petrochemical industries, with at least 5 years in a maintenance execution leadership role., • Proven track record leading Maintenance Support Services teams across multiple disciplines (building maintenance, civil, grounds, Janitorial, HVAC, elevators), • Strong understanding of maintenance compliance programs, including Safety Critical Elements (SCE), Statutory, and federal requirements., • Demonstrated ability to lead safe work execution in a live operating environment., • Experience managing integrated maintenance schedules and coordinating across Operations, Maintenance, and Engineering functions., • Proficiency with CMMS systems (SAP or similar) and understanding of maintenance planning processes., • Competent in reading and interpreting technical drawings (P&ID, Isometrics, GA)., • Experience in applying MOC, FMEA/FMECA, and continuous improvement methodologies., • Physically able to meet the role’s demands, including field presence and ERT participation.PREFERRED QUALIFICATIONS, • Technical Trade School Degree/Diploma, • Prior experience in an LNG export or large-scale energy infrastructure facility., • Leadership experience during plant Turnarounds or major maintenance shutdowns., • Background in contractor management and vendor performance oversight., • Experience developing and implementing lifting procedures and equipment management systems., • Knowledge of reliability-centered maintenance (RCM) principles and asset optimization strategies., • Demonstrated success driving cost-saving and value-adding maintenance initiatives., • Advanced knowledge of inspection techniques, materials management, and procurement processes., • Recognized qualification in leadership, project management, or maintenance management., • Active participation in Emergency Response Teams (ERT) or site safety committees.Work Environment & Physical Demands (with or without reasonable accommodations), • Operates in a complex construction and industrial environment, • Work is performed both indoors and outdoors, often under challenging weather conditions for extended periods., • Must be able to wear all mandatory PPE required to perform job functions safely, • Must be physically capable of moving throughout all areas of the facility and reaching designated muster point during emergency situations., • Must be able to clearly communicate in English – verbally, via radio, and by phone., • Regular exposure to indoor and outdoor weather conditions, including hot, cold, wet, humid, and windy environments., • Must be able to lift up to 40 pounds unassisted and push/pull with up to 50 pounds of force., • Required to grip objects with up to 50 pounds of force., • Frequent standing, walking, and balancing, including climbing stairs and ladders., • Regular reaching, bending, stooping, handling, and spinal twisting.

Job DescriptionABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecade’s common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit . SUMMARY OF THE ROLE The Specialist, Condition Monitoring is to support the Manager, Reliability in overseeing the condition monitoring program. The Specialist, Condition Monitoring will provide leadership for Condition Monitoring Technicians and support Reliability and Discipline Engineers, Condition Monitoring Technicians and Laboratory team. The position will be based in Brownsville, TX. KEY RESPONSIBILITIES • Provide leadership and oversight for the Condition Monitoring Service Contract, working closely with Rotating Equipment Discipline Engineers., • Serve as the Condition Monitoring Subject Matter Expert during Reliability Centered Maintenance (RCM) studies to enhance equipment reliability and optimize maintenance costs., • Partner with Discipline Engineering and Condition Monitoring teams to implement and sustain the company’s Condition Monitoring Program for facility equipment., • Review and validate condition monitoring recommendations prior to creating corrective work notifications., • Utilize advanced diagnostic tools and techniques—such as vibration analysis, oil analysis, thermal imaging, ultrasonic testing, and trend data—to support Rotating Equipment Engineers in identifying and predicting potential equipment failures., • Manage the Condition Monitoring Contract and coordinate with Maintenance and Engineering teams to execute preventive maintenance programs., • Optimize condition monitoring intervals in collaboration with Engineering and Rotating Equipment disciplines., • Identify and implement optimal lubrication sampling locations to ensure effective lube oil analysis., • Establish and refine condition monitoring routes (lubrication, thermography, vibration)., • Drive adoption of remote sensors and digitalization for enhanced condition monitoring data collection., • Provide technical support for continuous improvement of Condition Monitoring and Maintenance strategies., • Contribute to achieving Key Performance Indicators (KPIs) and reliability targets for the RGLNG Reliability Team., • Develop, maintain, and document procedures and records for Condition Monitoring data., • Participate in equipment failure investigations and provide technical insight to prevent recurrence.MINUMUM REQUIREMENTS, • Trade certification or equivalent hands-on industry experience., • Certified Vibration Analyst – Category II (minimum)., • Certified Machine Lubrication Analyst (MLA Cat II) or Machine Lubrication Engineer (MLE) certification., • Working knowledge of Bently Nevada System 1 or equivalent condition monitoring systems (preferred)., • Skilled in thermal imaging, including data capture and basic report generation., • Minimum 5 years of condition monitoring experience within petrochemical, LNG, or heavy industrial operations, performing both data collection and analysis., • Minimum 10 years total experience in maintenance, reliability, or other technical roles., • Prior participation in RCM workshops and demonstrated application of reliability improvement strategies.PREFFERED REQUIREMENTS, • Experience with SAP S4 HANA maintenance or reliability modules., • 5+ years of experience in an LNG facility or similar heavy industrial environment in a condition monitoring role.

Job Description Your Next Career Move Starts Here – Join F.D. Thomas in Brownsville, Texas! Are you driven to create safer, healthier job sites and ready to make a meaningful impact on a major project in one of Texas's fastest‑growing regions? At F.D. Thomas, we're not just building facilities, we're building a culture of safety, accountability, and continuous improvement. As a Site EHS Specialist (Nightshift) supporting our Brownsville TX project, you'll be at the forefront of our safety mission. You'll work closely with field teams, contractors, and leadership to champion safety practices, conduct on‑site assessments, and ensure compliance with local, state, and federal regulations. Your expertise will help us maintain an incident‑free environment while supporting a project that's driving growth in a vibrant Gulf Coast community. Whether you're facilitating toolbox talks, performing hazard assessments, or enjoying the area's warm climate, coastal access, and welcoming community, this role offers both professional growth and quality of life. Join F.D. Thomas -where your commitment to environmental health and safety helps build a stronger, safer future. Let's make an impact together. ABOUT US: F.D. Thomas, Inc. (FDT) is one of the largest coating and specialty contractors in the United States with offices in California, Oregon, Washington, and the East Coast. F.D. Thomas, Inc. is headquartered in Central Point, OR. FDT is a wholly owned operating company of ASRC Industrial (AIS). AIS was founded in 2016 by Arctic Slope Regional Corporation (ASRC), an Alaska Native Corporation (ANC) established under the Alaska Native Claims Settlement Act of 1971. As part of an ANC all our operating companies are Minority Business Enterprises (MBE). We help our clients meet their diversity spending objectives while also providing sustainable returns for our nearly 13,500 Iñupiat shareholders. By hiring Great People, we can provide Great Work to our highly valued customers, as we continue to grow an Extraordinary Company! WHAT YOU'LL DO: As our nightshift Site EHS Specialist, you'll be responsible for conducting daily EHS observations of field crews during their assigned work activities. Provides direct support to the Project PM, Project Leaders, Regional EHS Manager, and Corporate EHS Director to ensure personnel, equipment, materials, and job-site conditions meet safety, health, and compliance standards. This role requires maintaining a strong field presence, with at least 80% of the workday spent onsite engaging with crews and monitoring safe work practices. RESPONSIBILITIES INCLUDE: Field Presence & Work Environment • Perform daily EHS observations of field crews and personnel., • Maintain strong onsite visibility; able to work away from home on assigned jobsites., • Attend early morning EHS and JSA meetings (7:00 AM or earlier)., • Work weekends, holidays, and evenings as needed to support evolving EHS requirements., • Multi-task effectively in a fast-paced and demanding environment., • Research, interpret, and apply OSHA, EPA, DOT, and other regulatory requirements., • Conduct EHS assessments of work activities and evaluate site hazards., • Develop and update Job Safety Analyses (JSAs), Site Safety Plans, Activity Hazard Analyses (AHAs), Task-Specific Lift Plans, and Fall Protection Plans., • Evaluate the adequacy of PPE and safety systems., • Support management with EHS compliance concerns., • Perform industrial hygiene sampling; demonstrate practical understanding of equipment and technical IH principles., • Conduct Hazardous Waste Characterization, including CAM 17 and RCRA 8., • Conduct and participate in daily and weekly toolbox and safety meetings., • Mentor and coach field personnel on safe work practices., • Close training gaps through onsite instruction or coordination of courses through SafetySkills., • Ensure all employees onsite maintain required certifications for their scope of work., • Investigate and report all accidents and incidents involving employees, subcontractors, visitors, and others., • Manage Return-to-Work and Light Duty assignments., • Serve as liaison with the AIS Workers' Compensation Coordinator., • Coordinate Medical Surveillance activities., • Immediately correct unsafe conditions and communicate issues through the appropriate chain of command., • Ensure follow-through and documentation of all safety-related infractions or corrective actions., • Maintain a system for reporting, monitoring, and resolving safety concerns., • Assist in developing, implementing, and enforcing company safety policies and procedures., • Participate in and advise the Jobsite Safety Committee; maintain regular communication with leadership regarding safety issues requiring management action., • Conduct daily jobsite inspections and document all findings., • Support the Jobsite FDT office and project personnel in maintaining an effective EHS program., • Other duties as assigned. ABOUT YOU: FD Thomas believes our most valuable resource is our family of skilled, loyal, and professional employees. Our formula for success is easy, we believe Great People + Great Work = an Extraordinary Company. We not only look for people who possess the great skill sets and experience in the industry, but people with "can do" attitudes and train them to work to FDT standards. Our company passion and purpose are to leave things better than we found them. In addition to your passion and purpose, to be successful in this Site EHS Specialist role, you will possess the following: • Bachelor's degree in safety, industrial hygiene, or a related field of study preferred., • High school diploma., • Must have a comprehensive knowledge of OSHA regulations for the construction industry., • Competent knowledge and application of the safety principles and practices listed above., • Must have a broad working knowledge in the theory and practice of IH including methods, procedures, and techniques used in collecting samples and testing for health hazards common in the industrial painting business., • Must be able to communicate technical information in a clear and concise manner., • Must have excellent writing abilities in the preparation and delivery of safety plans, reports, training materials, investigations, and other written correspondence., • Ability to effectively work with all levels of people from entry level laborers to Project Leaders, Division Managers, Corporate Office/Jobsite Staff, and Public Officials., • Computer proficient using Microsoft Office applications (Excel, Windows, Outlook, etc.), • Must be able to organize and prioritize work with minimal supervision. PREFERRED (KSA) QUALIFICATIONS: • BCSP Certification or able to obtain (ASP, CSP, and/or CHST), • IH Sampling, • OSHA 500 Certification, • Hazardous Waste characterization, • Bilingual in English and Spanish, • No less than three (5) years' experience in Construction Safety or IH management., • 5 years of dedicated EHS experience in construction safety We thank you for your time in learning a little about us here at FD Thomas, as well as the opportunity we have available for someone who is Dependable, People-oriented, and Achievement-oriented. You will find we offer a generous Benefit Plan which includes PTO, Matching 401k, Paid Holidays, Per Diem, Medical (Starts on your 1st day), Dental, Vision options, and much more! We offer a competitive hourly wage of $35-$40 per hour depending on the combination of experience and/or certification. EEO Statement: ASRC Industrial and its operating companies affords equal opportunity in employment to all individuals regardless of race, color, religion, sex, sexual orientation, gender identity, age, national origin, pregnancy, familial status, disability status, veteran status, citizenship status, genetic information or any other characteristic protected under Federal, State or Local law. ASRC Industrial is an Equal Opportunity Employer. ASRC Industrial, ("AIS"), and its Operating Companies will never ask job candidates for sensitive personal information (such as Social Security numbers, banking details, or payment of any kind) during the hiring process. If you receive unsolicited communications from individuals claiming to represent ASRC Industrial using non-official email addresses (e.g., not from @asrcindustrial.com), please report the message and do not engage. Official job postings can always be found on our website: asrcindustrial.com/careers/

Job DescriptionMaintenance Technician, Instrumentation, conducts daily instrumentation maintenance execution activities, ensuring safe, quality work practices are maintained while maximizing availability of equipment across the facility. This position is located in Brownsville, TX. Key Responsibilities: • Demonstrate proactive safety attitude at all times., • Always uses safe work practices and follows NextDecade lifesaving rules and permitting processes., • Maintains a high focus on safety and wellbeing of execution team, leads by example to set and maintain a positive safety culture of compliance and continuous improvement for Apprentices and Contractors, • Engages and communicates effectively with all maintenance disciplines as required, not just the Instrumentation team, including Electrical, Mechanical, Plant Services, Planning, Engineering, Specialist Vendors and Contractors upholding the One-Team approach, • Initial support and continued review of Preventative & Corrective Maintenance Plans aligned to the equipment selected for this facility., • Participate in the reviewing of maintenance documentation, such as Work Instruction’s, Job Safety Analysis, Permitting, red lining of documents., • Participate in the Instrumentation maintenance execution activities of all breakdown, corrective and preventative maintenance in the facility, • Provide support to the leadership of the Turnaround Team prior and during Turnarounds, • Responsible to safely complete all assigned activities to a high standard, • Perform Permit Holder requirements for the execution of work at RGLNG, • Maintain personal training and competency compliance., • Actively participate in all the required maintenance execution meetings, including HSSE meetings, pre-starts, work allocation tasks, tailgates and toolboxes etc. Minimum Requirements:, • High school diploma or GED., • Technical degree in Industrial Maintenance Instrumentation or similar and NCCER preferred., • 5+ years LNG Export Facility experience in an Instrumentation Maintenance Execution role or 10+ years' experience in LNG/Oil & Gas/Petrochemical industries., • Competent for all Instrumentation Maintenance activities., • Competent at interpreting Engineering Drawings and Documentation i.e. P&ID, ISO, GA, Logic, Control Narratives, Cause & Effect, Loop & Wiring, etc, • Must have experience with the testing and inspection of Safety Critical Elements (SCE), Statutory and Federal Regulatory compliance., • Experience in GOAL setting and performance management., • Experience and working knowledge of CMMS systems (SAP or Similar), • Experience working with and red-lining critical Maintenance procedures., • Good working knowledge of an Management Of Change (MOC) process., • Experience in maintenance activities during Turnarounds., • Relevant Instrumentation LNG maintenance experience including Integrated Control & Safety Systems (DCS / SIS), PLC’s, Flow Computers, analyzers, gas turbines, fire & gas detection systems, control valves, anti-surge control, and field instrumentation is a must., • Ability to Obtain NFPA 70E qualification, • Experience with Instrumentation Equipment in Hazardous Classified Areas, • Experience with Lock Out Tag Out (LOTO) equipment isolations in accordance with Permit to Work Systems and processes., • Must be experienced in writing/reviewing Work Instructions, • Computer literate in Word, Excel, and CMMS/database applications., • Strong analytical and problem-solving skills with a hands-on approach to work., • Must be able to obtain a TWIC card., • Participate as a member of the Emergency Response Team (ERT) to support on-site emergenciesWork Environment & Physical Demands (with or without reasonable accommodations), • Operates in a complex construction and industrial environment., • Work is performed both indoors (in a controlled indoor environment using computer systems such as DCS) and outdoors in the field, often under challenging weather conditions for extended periods., • Must be able to wear all mandatory/necessary PPE equipment to perform job functions safely., • Must be physically capable of moving throughout all areas of the facility, including being capable of traveling to a designated muster point during emergency situations., • Must be able to clearly communicate, in the English language, with others via radio, phone, and verbal methods., • Regular exposure to indoor and outdoor weather conditions, including hot, cold, wet, humid and windy environments

Infection Prevention and Control Technical Specialst Job Duties: Consolidate, review and revise Americares existing technical materials related to disease outbreaks, infection prevention and control and health worker safety. Maintain current awareness of technic

Overview Logistics Management Specialist (EO/IR 2025-24321): Bowhead seeks a Senior Logistician to join our team at the Naval Surface Warfare Center – Crane Division (NSWC-Crane). Assist the Government in the management of multiple EO/IR Technical Data Packages (TDPs), creating or updating existin

As a Technical Support Representative, you will be responsible for finding innovative ways to respond to varying questions, issues, and concerns. Provide front line, first level, technical assistance for consumers. Resolve technical problems, within a fast paced, customer facing environment.

Make an impact in the role of Amazon IT Support Technician to support the preparation and delivery of goods or services, assist with processing returns and exchanges, and provide excellent service to customers and team members.Other duties include manage daily responsibilities with a focus on qualit