Jobs in Anaheim, California - Page 8Create job alerts

Job Description The Senior Inspector performs receiving, in-process, and final inspection on electronic systems; electromechanical assemblies, or mechanical assemblies and subassemblies. They are responsible for determining whether parts or assemblies are acceptable based on drawing and specification requirements. The position requires accurate & concise communication between production, project management, shipping/receiving, and quality management. Duties and Responsibilities: • Perform all tests, inspections and measurements required by pre-defined instruction and/or experience., • Conduct inspection of incoming raw materials, first article parts, in-process materials, and finished goods, • Inspect both work in progress and completed tasks for compliance in accordance with Purchase Order Instructions, Design Drawings & Specifications, Quality Control Plan, Safety, and contractual requirements, • May Coordinate and assist with scheduled inspections with FAA/EASA regulatory personnel, • Develop training and train junior individuals on inspection equipment and methods, • May Travel to various local and international supplier facilities to preform inspections. Preferred Qualifications and/or Education: • 6+ years of experience working in a Quality Inspection role, • Experience in aerospace electromechanical quality control inspection, • Experience working in an ISO 9001/AS9100 QMS environment, • Must be able to read and interpret schematics, blueprints, specifications, etc. per ASME Y 14.5 and ASME Y 14.100 and able to train junior inspectors, • Able to read and interpret service manuals, diagrams and schematics relative to installation and repairs, • Willing and able to train junior inspectors on how to use various inspection equipment, • 6+ years of experience using mechanical/electrical inspection/test tools (calipers, micrometers, multi-meters, surface plate, height gauges, comparator, gauge blocks, thread gauges, etc.) and/or 6+ years working with FAA CFR Part 21 requirements performing and presenting parts for regulatory conformity inspections should be able to issue 8130’s & Form 1s, • Solid knowledge of AS9102 FAIR requirements and able to train junior inspector on its completion, • Must have a clear understanding of document types that are impacted by Configuration Control Changes; e.g. Drawings & Specifications, Procedures and Work Instructions, • Previous experience working with an ERP or MRP systems, • Proficient computer skills (MS word, Excel, Outlook) Benefits The starting pay range for this position is $25.00 to $31.00 per hour however, the base pay offered may vary depending on the level of the position, skills, experience, job-related knowledge, and location. In addition to a comprehensive package of health benefits that include company contributions, Safran Passenger Innovations offers a variety of additional benefits and perks to enhance your work-life balance experience including but not limited to: • A home allowance to elevate your home workspace, • Discretionary bonus program, • Future financial security with a 401(k) program with a company match, • Paid time off covering vacations, personal time off, and sick days, capped off by an exciting year-end holiday shutdown

Job Description Meet REVOLVE: REVOLVE is the next-generation fashion retailer for Millennial and Generation Z consumers. As a trusted, premium lifestyle brand, and a go-to online source for discovery and inspiration, we deliver an engaging customer experience from a vast yet curated offering totaling over 45,000 apparel, footwear, accessories and beauty styles. Our dynamic platform connects a deeply engaged community of millions of consumers, thousands of global fashion influencers, and more than 500 emerging, established and owned brands. Through 16 years of continued investment in technology, data analytics, and innovative marketing and merchandising strategies, we have built a powerful platform and brand that we believe is connecting with the next generation of consumers and is redefining fashion retail for the 21st century. For more information please visit . At REVOLVE the most successful team members have a thirst and the creativity to make this the top e-commerce brand in the world. With a team of 1,000+ based out of Cerritos, California we are a dynamic bunch that are motivated by getting the company to the next level. It’s our goal to hire high-energy, diverse, bright, creative, and flexible individuals who thrive in a fast-paced work environment. In return, we promise to keep REVOLVE a company where inspired people will always thrive. To take a behind the scenes look at the REVOLVE “corporate” lifestyle check out our Instagram @REVOLVEcareers or #lifeatrevolve. Are you ready to set the standard for Premium apparel? Main purpose of the Outbound Lead: The Outbound Lead will optimize and prioritize the team’s productivity and accuracy by classifying the shipping options according to pick up schedules. (I.e. packing, picking and shipping). Major Responsibilities: Essential Duties and Responsibilities include the following. Other duties may be assigned. • Training of new and existing pickers and packers., • Prioritize daily tasks according priorities and pick up schedules., • Report attendance and request additional resources when necessary based on forecasted units., • Troubleshooting exceptions to allow the team to continue processing, • Developing expert abilities in the packing department field, • Testing of new process improvements, • Benchmarking and evaluating employees, • Ordering supplies for the team when necessary, • Providing daily productivity packing & picking reports Required Competencies: To perform the job successfully, an individual should demonstrate the following competencies: • Excellent communication and interpersonal skills (bilingual is preferred), • Highly effective training skills and techniques, • Basic working knowledge of communicating through emails, • Hands-on commitment to getting the job done, • Proven work experience in a warehouse environment (as lead/supervisor or above), • Dependable Minimum Qualifications: • Minimum of 2 years of experience in warehouse picking and packaging leading a large group., • Computer literate in Excel, Word and email. Experience with a WMS system., • Bilingual (Spanish & English) A successful candidate works well in a dynamic environment with minimal supervision. At REVOLVE we all roll up our sleeves to pitch-in and do whatever it takes to get the job done. Each day is a little different, it’s what keeps us on our toes and excited to come to work every day. For individuals assigned and/or hired to work in California, Revolve includes a reasonable estimate of the salary or hourly rate range for this role. This takes into account the wide range of factors that are considered in making compensation decisions; including but not limited to business or organizational needs, skill sets, experience and training, licensure, and certifications. A reasonable estimate of the current hourly rate is $18.50/hr - $21.00/hr. ATTENTION: After submitting your application, please check your spam folder for emails on your application status. Emails are sent from an ADP email address.

Job Description This position is responsible for daily set-up and operations of CNC laser cutting machines used in production of sheet metal and plate parts. Fabricate sheet metal products and equipment, such as ducts, control boxes, covers, brackets, and plates to name a few. Work will involve set up and operation of Amada CNC laser cutting machines to produce sheet metal parts. ESSENTIAL FUNCTIONS • Perform daily machine startup and shut-down procedure on CNC cutting equipment., • Stage raw material at each work center for production processing., • Load/unload materials and parts finish from CNC cutting equipment to maintain production schedule., • Perform maintenance and cleaning of production equipment and work area in accordance with company and manufacturers machine recommendations., • Perform machine alignment procedure and/or optical cleaning to keep CNC cutting equipment at peak operating performance., • Perform laser cutting conditions (Voltage power, gas, feed rate) to optimize machine cutting process., • Ensure production schedule are follow through based on approved production schedule., • Monitoring assist gas and resonator gas levels and recommended supply requirements for daily production., • Operator to coordinate with supervisor for machine maintenance., • Operator to coordinate with supervisor to keep production throughput., • Monitor material usage and order for production throughput., • Maintain document control per departments ISO standards., • Supporting company policies and procedures, goals and objectives, ISO policies, and good manufacturing practices., • Use Infor to keep track of work orders on a daily basis, • Employees are to speak only English during an emergency and while performing job duties where there is potential for an emergency. The rule does not apply to casual conversations between employees when they are not performing a job duty., • Keep the laser area clean on a daily bases., • Knowledge of manufacturing concepts., • Understand G-code for laser cutting systems, • Ability to grasp modern technology quickly., • Familiar with sheet metal flat patterns., • Must have good analytical skills and should be detail-oriented., • Must be able to work in a team and follow deadlines., • Must have good communication skills.PAY RANGE: Requires ability to bend, lift, stoop, reach, stand, crawl, and climb. EDUCATION and QUALIFICATION • AA in engineering discipline desired (but not necessary), • Experience and/or trained operating a Laser/CNC cutting machines. Note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description NO EXTERNAL RECRUITERS PLEASE No Sponsorship/Transfer Available Company Summary: For over 60 years, MeriCal has been at the forefront of innovation in the dietary supplement industry, delivering custom manufacturing and packaging solutions with passion and precision. With state-of-the-art facilities in Southern California and Ogden, UT, we transform ideas into high-quality products—from research and development to the finished products. Our team, with over 30 years of combined experience, is dedicated to crafting exceptional gummies, probiotics, tablets, capsules, chewables, and powders using clinically backed ingredients. At MeriCal, we don’t just meet expectations—we exceed them, every time. Join us and be part of a dynamic, forward-thinking team shaping the future of nutrition! The Opportunity: We’re looking for a detail-oriented MFG Gummy Line Operator to join our manufacturing team! In this role, you’ll be responsible for setting up, operating, and monitoring the gummy production line—including the kettle, depositor, and cooling tunnel. You'll troubleshoot issues as they arise and ensure all processes run smoothly and safely. This position requires strict adherence to cGMP standards, Standard Operating Procedures (SOPs), and Master Batch Record instructions to maintain high-quality production standards. What You’ll Do: • Ability to weigh raw materials for usage following Manufacturing Batch Record (MBR)., • Operation of gummy manufacturing line including adding and mixing raw materials, ensuring proper process flow of gummy blend, and conducting in-process measurements., • Closely monitor cooking process with emphasis on pH reading and brix measurement., • Spread final product across drying trays and visually inspect gummies for quality acceptance., • Clean and sanitize equipment and production room., • Operate and maintain tray washing machine., • Perform basic calculations including addition, subtraction, and yield percentages., • Must be able to stand for 90% of scheduled shift and be able to lift up to 50lbs., • High School Diploma/Certificate; or six months to one-year related experience and/or training; or equivalent combination of education and experience., • Ability to follow written instruction including Manufacturing batch records, Safety policies, and Quality requirements., • Ability to read, write, and communicate effectively in English to perform essential job functions., • Quality conscious with excellent attention to detail., • Experience in food manufacturing, nutraceutical manufacturing, or possess mechanical aptitude., • Experience working in a team environment and providing process verification for team members. Ability to add, subtract, multiply, divide, and calculate percentages. The Perks: • No-cost vision insurance (yes, you read that right!), employer-paid life insurance, paid company holidays, generous paid time off, sick leave, employee assistance program, and a comprehensive wellness program., • Affordable medical and dental insurance plans are tailored for you and your dependents., • Exceptional supplemental benefits, including Accident, Critical Illness, Hospitalization indemnity plans, and pet insurance., • 401(k) matching plan and more! A reasonable estimate of the current base pay range for this position is $18.00 - $19.00. The compensation offered may vary depending on the candidate’s geographic region, job-related knowledge, skills, and/or education. MeriCal is an equal opportunity employer and is committed to providing a workplace that is inclusive and free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. We believe in creating a diverse and inclusive workplace where all employees feel valued and respected, and where differences are embraced as strengths. We are dedicated to fostering an environment that promotes equality and celebrates diversity. Qualified applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. Please contact if you need an accommodation due to a disability to complete an application, job interview, and/or to otherwise participate in the hiring process. This email does not respond to non-accommodations related requests. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: For more information about the categories of personal information we collect from you and how we use, sell, and share that information, please see our Privacy Notice for California Contractors and Privacy Notice for California Employees. 6:00AM-2:30PM

Job DescriptionDescription: Shift: 2:30pm - 11:00pm Automatic Optical Inspector (AOI) Operator Scope: An automatic optical inspection (AOl) Operator will scan cores and panels on automatic optical inspection. In addition, they will verify defects and determine the disposition of the work and perform the rework in accordance with AOI inspection and rework instructions. Essential Job Function: • Operate AOI and Rework department equipment., • Perform preventative maintenance as defined by department maintenance schedule., • Select data from database per work instructions, • Scan and verify cores and panels using acceptability criteria found in the AOl inspection and rework instructions., • Perform manual Rework as required by instructions, • Verify Acceptability of Rework after completion., • High school diploma or equivalent, • Strong work ethic, • Ability to work effectively in a team environment, • Prolonged periods standing and operating equipment, • Fine motor skills, • Ability to use microscopes for long periods of time, • Ability to carry 30+ lbs or more ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be considered for this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Compensation: Exact compensation may vary based on skills, experience, and location. About AdvancedPCB AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features 6 total manufacturing sites: Santa Clara, our headquarters in the heart of the Silicon Valley; 2 in Southern California, 1 in Maple Grove, Minessota, Aurora, Colorado and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making AdvancedPCB one of the largest privately held printed circuit board manufacturers in North America. Visit us!

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated Via Fill Operator to join our growing company. Scope: A via is a copper plated hole used to connect two or more layers in a printed circuit board (PCB). Via Fill is a manufacturing process used to selectively and completely fill or close via holes by applying an epoxy to the PCB and then planarizing epoxy and copper once the epoxy is cured. Responsibilities: • Operate all department equipment, quality checks, preventative maintenance and minor repairs, • Enter jobs into the manufacturing tracking system, • Read and interpret shop orders to verify that all previous operations were completed, to verify count and verify quality, • Maintain a safe, neat and organized workplace This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is 3rd Shift | Monday night through Saturday morning, 11:00 pm to 7:30 am. Requirements: Essential Qualifications, Education and Experience: • High School Diploma or Equivalent, • Able to effectively communicate with management and supervisory staff., • Able to lift to 25lbs. California Pay Range: $19.00 - $22.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. About AdvancedPCB AdvancedPCB, with over 40 years of experience, is a leading manufacturer of high-reliability printed circuit boards. The company features six manufacturing sites: Aurora, Colorado, our headquarters, Santa Clara, two in Southern California, Maple Grove, Minnesota, and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Advanced PCB offers Medical, Dental, Vision Insurance as well as 401K. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us!

Job Description Job Summary Responsible for inspection and test requirements at all stages of manufacturing to ensure customer requirements. The Inspector is also responsible to record and report any defects and ensure the defects are corrected before delivery to the customer. Committed member to the Quality and Production teams and adaptable to changing roles within the Quality function. Primary Responsibilities • Carries out and coordinates all inspection and test requirements as outlined in the Quality Procedure Manual and contract requirements including compliance with the requirements of AS 9100., • Maintains relevant updated specification, standard and quality systems documents., • Performs assigned tests on materials and parts, product in process, and finished product., • Inspects visually for obvious defects., • Compares results with drawing and specification requirements., • Reports problems with inspection and test results to Quality Supervisor., • Identifies defectives and segregates from acceptable product., • Notifies Quality Supervisor and Quality Engineer when inspection data exceeds acceptable limits or when major incidents of poor quality are noted., • Records results on inspection forms or charts and report number of defects found., • Makes recommendation on disposition of suspect/defective product to Quality Supervisor., • Supports the quality record retention requirements by assisting with filing and maintenance of Quality Records., • Experience with a 3D scanner or Faro Arm, • Working knowledge of Quality Assurance standards., • Excellent verbal and written communication skills in English., • Ability to read blueprints., • Good interpersonal skills and ability to work as a team member, as well as independently., • Ability to communicate with all levels within Productions and get messages across that has the desired effect., • Ability to think critically and act logically to evaluate situations and generates required steps to ensure success., • Persistence and determination when problem-solving., • Strong focus on quality: ability and commitment to achieve total customer satisfaction in the quality of our products, services and decisions, implement systems and processes focused on excellence and continuous improvement., • Strong focus on safety, including personal safety, safety of co-workers, and protection of property on the job in accordance and compliance with company practices, industry standards, and government regulations., • Knowledge of AS 9100 Quality Systems., • Knowledge of calibration requirements/procedures., • Approachability, • Teamwork, • Customer Focus - Knows and understands the needs of internal and external customers. Is results oriented and works hard to consistently provide exceptional service., • Ethics and Values - Adheres to an effective set of core values and beliefs and acts in accordance. Rewards the right values and disapproves of others., • Problem Solving - Looks beyond the obvious to find effective solutions., • Integrity and Trust - Widely trusted and seen as direct and truthful., • Functional/Technical Skills - Possesses the skills to be effective in the job. Has the skills to perform the job at a high level of accomplishment., • Listening - Practices active and attentive listening, able to hear others., • High School Degree or equivalent strongly preferred, • Minimum of three years successful employment as an individual contributor with a preference for aerospace manufacturing., • Experience in Quality Assurance. Kirkhill, Inc. is proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. All successful candidates must submit to post offer pre-employment physical examination, drug/alcohol screen and background check as a condition of employment. Job Posted by ApplicantPro

Job DescriptionBakery Laminator Operator 3rd shift (9pm - 5am) plus weekends as needed. Must have Manufacturing Baking Knowledge Experience SUMMMARY: • The primary function of a Laminator Operator is to operate the laminator machine in a safe, efficient manner to ensure all product specifications are met., • The Laminator must have baking knowledge., • The Laminator must have experience with dough and laminator/sheeting machinery., • The Laminator will need to know how dough should feel and perform through a sheeter laminator.FUNCTIONAL RESPONSIBILITIES & DUTIES:, • Works well with others, fostering a team atmosphere., • Maintains a clean, safe work area always. Practicing Clean As you go methods., • Comply with all GMP requirements., • Ensure all paperwork is completed on time and information is accurately recorded., • Ensure the weights are accurate before sending product into the ovens., • Interacts with Mixer to check consistency of dough before Mixer brings dough to the line., • Full knowledge of laminator equipment and product specifications to make necessary adjustments to keep line running efficiently., • Monitor dough level using sound judgement by monitor controls to make sure it has the correct amount of always stretch in the dough., • Monitor thickness of dough, using sound judgement before dough enters the dimple roller to ensure proper thickens., • Monitor dough coming out from print screen area to ensure image is clear and correctly positioned. Adjusting print screen ink levels as necessary to keep the proper amounts of ink on the screen., • Frequently checks specifications of product to ensure good product by taking periodic samples to weigh and check for quality, • Ensures only quality product is entering the oven such as raising the cutter and stopping transfer belts until problem is resolved., • Monitors equipment for any maintenance-related item that may affect the efficient production of quality products and takes action to resolve problem. Reports any operational issues to supervision., • Monitors the laminator equipment and the procedure for safety and reports any issues to the supervisor., • Operate assigned line with constant attention to quality of product, scrap reduction and minimal downtime., • Develop ways to eliminate scrap such as dough falling off conveyors and dough peeling around gauge rolls., • Required to take apart and clean and/or reassemble equipment for changeovers., • Able to properly submit work orders as needed., • Assist or oversee the training of new employees when needed., • Assist with changeovers, machine setup and cleaning., • Ability to perform simple mathematical calculations., • Ability to read and record written specifications of product., • Ability to work independently, or on a team of different sections of the laminator., • Notify Supervision of any issues., • Must adhere/comply with all Company policies, procedures, and practices. EXPERIENCE: • Some manufacturing experience in a food plant helpful. PHYSICAL DEMANDS AND WORK ENVIRONMENT: While performing the essential duties of this job, the employee must be able to stand, stoop, kneel, crouch, climb and lift up to 50 lbs. and shared weight up to 100 lbs. Occasional exposure to airborne dust, high humidity and extremes of hot and cold are possible. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Job Type: Full time Pay: $19.82 per hour Benefits: • 401(k), • Dental Insurance, • Health Insurance, • Vision Insurance, • Paid Time OffSchedule:, • 8 Hour Shift Powered by JazzHR 7VpPAdQSM1

Job Description Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Track Operator , you will be at the core of the day to day operations, leading and guiding our customers to a fun, safe karting experience. Is this you? Duties and Responsibilities • Provide excellent customer service to all K1 Speed visitors, • Run races precisely, on time and safely, • Maintain track cleanliness at all times, • Minor lifting required, • Must be at least 18 years of age, • Provide proof of identity and eligibility to work in the United States, • Must have reliable transportation, • Weekends are a must!

Job DescriptionDescription: The Machinist – Milling Specialist supports aerospace manufacturing by operating CNC and manual milling equipment to produce high-precision components that meet strict FAA, AS9100, and customer-specific aerospace requirements. This role ensures accuracy, quality, and compliance with all industry standards while contributing to a safe and efficient production environment. Requirements: Edit programs, set up, and operate complex CNC machines, including multi-axis mills and multi-tasking mill-turns (Mazak, WFL). • Work with ultra-precision tolerances (±.0005” or tighter) on complex aerospace components., • Select proper tooling, fixtures, cutting parameters, and machining strategies for aerospace components., • Perform tool offsets, adjustments, and changeovers to maintain precision within tight tolerances., • Inspect parts using calipers, micrometers, gauges, CMM data, and other aerospace-approved metrology tools., • Maintain documentation for AS9100 compliance, including traceability and production records., • Conduct routine preventative maintenance and ensure machines operate at optimal levels., • Identify machining issues and collaborate with engineering and quality teams to resolve discrepancies., • Maintain a clean, organized workspace aligned with 5S and continuous improvement practices., • Follow all safety procedures and regulations applicable to aerospace manufacturing. Requirements Qualifications Education & Experience: • High school diploma or GED required; technical training in machining preferred., • Minimum 2-4 years of milling or precision machining experience, preferably in aerospace manufacturing., • Experience in machine aerospace materials and working to AS9100 or FAA standards strongly preferred Skills & Competencies: • Strong knowledge of milling operations, tooling, feeds, and speeds., • Ability to read complex aerospace drawings and GD&T requirements., • Proficiency with precision measuring equipment and inspection documentation., • Strong attention to detail and commitment to producing flight-critical components., • Ability to work independently and collaborate across production, quality, and engineering teams. Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off

Job DescriptionSalary: $20.00/hr. POSITION IDENTIFICATION Title: Production Team Member Business Unit: iManufacturing Reports to: Production Supervisor/Production Team Lead Location: Yorba Linda, CA POSITION STARTS MARCH 2026 COMPANY DESCRIPTION Impact Housing (IH) is a vertically integrated modular design-builder and developer headquartered in Southern California. Our mission is to continuously evolve the worlds most sophisticated and efficient housing delivery system. We pursue this mission by reimagining every element of how multifamily projects are designed, manufactured, and builtdriving down costs, shortening schedules, and expanding access to high-quality housing for the people who need it most, whether through LIHTC or unsubsidized projects. To date this decade, the IH team has built or is actively developing close to 1,500 modular units at all-in costs of roughly $275,000 per unitdemonstrating a scalable, repeatable path to affordability. With the capability to produce approximately 1,000 units per year today, IH is expanding to meet growing demand in San Diego, Los Angeles, and beyond. We are now entering the next stage of our growth and strengthening every team across the company to achieve our next set of goals. We plan to manufacture and build more than 10,000 units through 2030. To accomplish this, we are implementing the Lean Standard Model company-wide; deploying AI at every level of the company; and positioning IH as a national thought leader in modular development. The foundation for our success is firmly in place. Join us as we scale our operations, transition into a higher-capacity manufacturing facility powered by smart automation and robotics, expand our production capacity by more than 3x in the Western U.S., and prepare for future national growth. POSITION SUMMARY Were seeking dedicated Production Team Members to join our growing modular home manufacturing operation. As a Team Member, youll play a key role in crafting high-quality homes using innovative construction methods, all within a clean, climate-controlled facility.This is an exciting opportunity to learn multiple trades, work in a collaborative team environment, and build a lasting career in modern manufacturing. KEY RESPONSIBILITIES • Execute production tasks following standardized work and quality specifications., • Work in various production areas such as framing, electrical, plumbing, sheathing, saw operations, finishing, and more., • Maintain daily production pace and perform quality checks at each workstation o ensure work meets company standards and building codes., • Follow all safety procedures and maintain organized, 5S-compliant work areas., • Report production issues or material shortages promptly to your Team Leader., • Work collaboratively with team members, support new employees, and contribute to a positive, team-focused work environment., • Participate in cross-training, lean manufacturing initiatives, and team improvement projects. CROSS TRAINING Team members may be trained and work in any of the following positions based on production needs and individual skill development: • Framing Wall framing, floor systems, roof trusses, structural assembly, • Electrical Rough-in wiring, fixture installation, panel installation, electrical testing, • Plumbing Pipe installation, fixture mounting, water system testing, drain assembly, • Sheathing Wall sheathing, roof decking, subfloor installation, exterior panel installation, • Saw Operations Material cutting, component preparation, saw equipment operation, • Finishing Drywall installation, taping and mudding, painting, trim installation, • Insulation Insulation installation, vapor barrier application, energy efficiency measures, • Exterior Siding installation, roofing, windows and doors, exterior trim, • Cabinetry Cabinet installation, countertop mounting, hardware installation, • HVAC Ductwork installation, unit mounting, register installation, • Final Assembly Hardware installation, touch-up, final quality inspection, punch list completion QUALIFICATIONS • Bilingual in Spanish, • Previous manufacturing, trades, or construction experience, • Willingness to learn new skills and be cross-trained in multiple positions, • Ability to follow detailed instructions and standardized work procedures, • Basic reading and math skills for blueprint reading and measurements, • Reliable work history demonstrating dependability and attendance, • Positive attitude, teamwork mindset, and willingness to be cross-trained Preferred Qualifications • Experience in carpentry, electrical, plumbing, or other construction trades, • Lean manufacturing or 5S knowledge EDUCATION & CREDENTIALS • High school diploma or equivalent preferred, • Forklift certification, OSHA 10/30 preferred WORK AUTHORIZATION All prospective Impact Housing employees must be able to demonstrate eligibility to work in the US. COMPENSATION & BENEFITS • Hourly pay of $20.00/hr., • Health benefits: Medical, Dental, Vision, FSA, HSA, • Vacation, • Sick time, • Holiday pay, • Ownership of company equity, • 401K Retirement Plan PHYSICAL REQUIREMENTS • Ability to stand and walk for extended periods (8-10 hours per shift), • Capability to lift up to 50 pounds regularly and occasionally up to 75 pounds with assistance, • Manual dexterity to operate hand tools, power tools, and equipment, • Ability to work at various heights including on ladders and scaffolding, • Visual acuity to read measurements, blueprints, and identify quality issues, • Ability to work in manufacturing environment with varying temperatures, • Stamina to maintain productivity throughout full shift/ WORKING CONDITIONS • Climate-controlled manufacturing environment with a focus on comfort and safety, • Standard schedule: Monday-Friday, 5:00AM-1:30PM with flexibility on start and end time, • Overtime and Saturday work may be required during peak production periods, • Fast-paced production environment with daily targets and quality expectations, • Team-based work structure with collaboration and communication throughout the day, • Exposure to construction tools, equipment, materials, and manufacturing processes, • Noise levels requiring hearing protection in certain areas NOTE This job description in no way states or implies that these are the only duties to be performed by the employee(s) of this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. Impact Housing is an equal opportunity employer, drug-free workplace, complies with ADA regulations and does not discriminate against any employee or job applicant because of race, color, religion, national origin, medical condition, pregnancy, sex, gender identity, gender expression, age, veteran status, physical or mental disability, or other applicable legally protected characteristics. For more information about Impact Housing, visitihousing.us.

Job DescriptionSalary: $18-$25 Job Title: Press Brake Operator Job Description: As a Press Brake Operator, you will play a critical role in our production process, ensuring the precise bending and forming of metal components. If you have a keen eye for detail, can interpret technical drawings, and are committed to producing high-quality parts, we encourage you to apply. Key Responsibilities: • Set up and operate Bystronic press brake machines to bend and form sheet metal components according to engineering drawings and specifications., • Select and install the appropriate tooling and dies based on job requirements., • Make necessary machine adjustments to ensure accurate and consistent bending angles and dimensions., • Monitor the production process, inspect parts for quality, and make real-time adjustments., • Perform routine maintenance on the press brake machines to ensure they operate smoothly and efficiently., • Collaborate with team members, including engineers and quality control personnel, to resolve production issues and meet project deadlines., • Maintain a safe and clean work environment, following all safety protocols and guidelines., • Proven experience as a Press Brake Operator, with a preference for Bystronic press brake machines., • Knowledge of Bysoft 7 Software is a plus., • Proficiency in interpreting engineering drawings and blueprints., • Strong mathematical skills and the ability to accurately measure and inspect parts., • Mechanical aptitude and problem-solving skills., • Attention to detail and a commitment to producing high-quality work., • Excellent communication and teamwork skills., • Ability to work in a fast-paced manufacturing environment and meet production deadlines., • Physical stamina and the ability to stand, lift, and bend for extended periods., • Prior knowledge of safety regulations and a commitment to workplace safety. Applicants must be authorized to work in the U.S. and have proof to be considered for this position. If you are a skilled Press Brake Operator with experience in operating Bystronic press brakes, we encourage you to apply for this position. Join our team and contribute to the production of high-quality metal components in a dynamic and innovative manufacturing environment.

Job DescriptionDescription: Schedule: 2:30pm - 11pm Scope: A Fabrication Operator will perform all the duties related to fabricating Printed Circuit Boards into distinct parts/arrays from a production panel, including the start- up, set up, operation, preventive maintenance and produce a quality product. Essential Job Function: • Operate multiple CNC machines simultaneously to fabricate low tolerance patterns (rout, milling, bevel), • Independently perform complex and standard machine set ups, • Load Fabrication programs, • Align production panels to tooling pins on Fabrication machine, • Visually and mechanically inspect panels, • Make required adjustments, • Operate chamfer, V-scoring machine and beveling machines, • Maintain a safe, neat and organized workplace, • Ability to read, write and communicate in English to the degree necessary to perform the job, • Manual dexterity / steady hand required, • Ability to read blueprints and drawings, • Ability to use a scope, caliper and micrometer, • Attention to detail, • Good vision required, • Good math skills, • Computer skills (basic), • Able to work overtime, weekends as needed, • High School Diploma or equivalent preferred., • Experience working in a manufacturing environment is a must, • Able to work in a team environment and willing to cross train, • Able to lift 25 pounds without straining, • Able to stand throughout the entire shift

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Role: Pioneer Circuits is offering a great opportunity to learn new skills and a trade from seasoned operators, placing you on a growth path within the Screening Department. The Legend Prep Operator performs a variety of activities such as setting up, cleaning and curing parts as specified on the standard operating procedure (SOP). What You'll Do: • Reads and interprets SOP, work instructions on the traveler to verify part number, job number, lot quantity and legend ink type; ensures that the previous operation was completed and that traveler was signed and dated., • Sets up stencils into the frame for preparation for legend process; Uses alcohol or MEK to clean all flex areas for silkscreen legend process and visually inspects to ensure that the panels are clean and dry, • Bakes panels in accordance with bake and cure table as described on the procedure, • Ability to read and interpret documents such as standard operating procedure, instructions and safety rules in English to the degree necessary to perform the job, • Ability to work in chemical environments, • Ability to understand and follow all safety codes and requirements., • Must be detailed oriented and self-motivated, • Must be able to remain focused with minor interruptions, • Excellent attendance and punctuality, • High School Diploma or GED (Preferred), • Monday through Friday: 1st and 2nd Shifts, • 1st Shift (7:30am to 4:00pm), • 2nd Shift (4:00pm to 12:30am), • Full-Time / Permanent Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job DescriptionSUMMARY The Seal layup personnel will help with reading and understanding detailed instructions on how to run machinery that pertains to Rubber & or Fabric Seal Molding. ESSENTIAL DUTIES AND RESPONSIBILITIES • Operation of jobs are assigned by the production scheduler and or molding foreman., • 1+ years with hand layup experience, • Handles raw materials (silicones, adhesives, fabrics etc.), • Assembling raw materials on to tooling., • Understanding of how to read and comprehend work orders., • Following work order instructions, • Detailed hand manufacturing Notify their immediate supervisor of any excessive scrap and or problems with the jobs that they have been assigned., • Input daily production data into ERP system, • Maintain production rates and efficiencies consistent with the company goals and requirements., • Visual in process inspection to verify product and sign off, • Maintain proper part identification and traceability., • Suggest process and manufacturing improvements when and if insufficiencies exist on opportunity improvements., • Maintain good housekeeping and safety practices., • Other duties as assigned by supervisor. QUALIFICATIONS The employee must be able to perform his/her duties successfully. Reasonable accommodation can be provided to help the employees perform their daily tasks if needed. Work schedule: Monday to Thursday 5am -3:30pm Job Posted by ApplicantPro

Job Description About the Role: The Screening Department Operator for second shift plays a crucial role in the durable goods manufacturing process by ensuring that all materials and products meet the highest quality standards before they proceed to the next stage of production. This position involves operating screening equipment, monitoring production lines, and conducting quality checks to identify any defects or inconsistencies. The operator will be responsible for maintaining accurate records of screening results and collaborating with team members to implement improvements in processes. By effectively managing the screening process, the operator contributes to the overall efficiency and reliability of the manufacturing operation. Ultimately, this role is vital in delivering high-quality products that meet customer expectations and regulatory requirements. Minimum Qualifications: • High school diploma or equivalent., • Previous experience in a manufacturing or production environment., • Experience operating screening or similar machinery., • Familiarity with durable goods manufacturing processes., • Operate and monitor screening equipment to ensure proper functioning and efficiency., • Conduct regular quality checks on materials and finished products to identify defects., • Maintain accurate records of screening results and report any issues to the supervisor., • Collaborate with team members to troubleshoot problems and implement process improvements. The required skills for this position include attention to detail, which is essential for identifying defects during quality checks. Strong communication skills are necessary for effectively collaborating with team members and reporting issues to supervisors. Problem-solving abilities will be utilized when troubleshooting equipment malfunctions or process inefficiencies. Familiarity with safety protocols is crucial to ensure a safe working environment for all employees. Preferred skills, such as experience with screening machinery, will enhance the operator's ability to quickly adapt to the role and contribute to the team's success. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic.

Job DescriptionDescription: Position Title: Conformal Coating Operator Department: Conformal Coat Location: Santa Ana, CA FLSA Status: Non-exempt, Full- Time Job Summary: The Conformal Coating Operator position is responsible for performing detailed manual application and correction of conformal coating on printed circuit boards (PCBs) and electronic assemblies. This role ensures coating accuracy in areas requiring additional coverage or removal of excess material. The position supports quality standards by using precision tools to verify that coated assemblies meet visual and functional requirements, while following strict process and cleanliness guidelines. Key Responsibilities: · Record keeping for machine maintenance purposes. · Mask and/or tape circuit boards in areas that are to be free of conformal coating or potting. · Inspect assemblies to ensure proper coating coverage. · Remove any excess coating and perform manual touch-up of any areas the coating machine may miss so boards maintain a consistent high quality. · Transport racks of circuit boards from one destination to another to continue the manufacturing process. · Maintenance includes changing fluids and cleaning machines to ensure efficient operation. · Perform general housekeeping duties to always provide a safe and clean working environment. · Additional tasks may be assigned by the supervisor to accommodate fluctuating production requirements. · Assist with companywide tasks. Qualifications: · High school diploma or equivalent (preferred) Physical Requirements: · Ability to stand for long periods and occasionally lift to 50 lbs. · Manual dexterity to handle small components and operate equipment. This job description is intended to provide a clear overview of the primary duties and responsibilities for the Conformal Coating Operator position. It is not an exhaustive list, and other tasks may be required as needed to support the company’s operations. Regal Technology Partners is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state, or local laws. We strive to create an inclusive and diverse work environment where everyone is valued and respected. If you require any accommodation during the application process or have any questions regarding our EEO policies, please contact Human Resources, Requirements:

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated Lamination Operator to join our growing company. The Lamination Operator operates and maintains machines used for manufacturing printed circuit boards (PCBs), ensuring quality standards and production schedules are met. The role involves setting up equipment, performing quality checks, and maintaining a sake workspace. Essential Job Function: • Operate all department equipment, quality checks, preventative maintenance, and minor repairs., • Enter jobs into the manufacturing tracking system., • Read and interpret shop order to verify that all previous operations were completed, to verify count and to verify quality., • Maintain a safe, neat, and organized workplace. This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is 3rd Shift | Monday night through Saturday morning, 11:00 pm to 7:30 am. Requirements: Essential Qualifications, Education and Experience: • High School Diploma or Equivalent, • Strong attention to detail and good problem-solving skills are essential., • Candidates must be able to read and interpret blueprints and understand job specifications., • Ability to read, write and communicate in English., • Basic computer skills for data entry., • Ability to work overtime, weekends and holidays as needed., • Able to lift to 25lbs. California Pay Range: $19.00 - $26 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. About AdvancedPCB AdvancedPCB, with over 40 years of experience, is a leading manufacturer of high-reliability printed circuit boards. The company features six manufacturing sites: Aurora, Colorado, our headquarters, Santa Clara, two in Southern California, Maple Grove, Minnesota, and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Advanced PCB offers Medical, Dental, Vision Insurance as well as 401K. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us!

Job Description Do you have experience in monitoring live video alarm events? Do you enjoy maintaining accurate documentation? Do you have experience notifying clients based on alarm response protocols? If so, we should talk. We are Power Plus! A multi-industry leader in providing power when you need it, where you need it through intelligent and efficient power solutions. We work with Fortune 500 companies across the country such as Amazon, Wal-Mart, Costco, and more. We’ve built a 35-year reputation for excellence through our commitment to developing our people, providing exceptional, relationship-based customer service, and giving back to the community. Our biggest differentiator is the quality of our people, and the working environment we create for them, which really has to be seen to be believed. Benefits: • Medical, • Dental, • Vision, • Training and mentoring, • 401(k) with matching, • Paid sick leave This position is responsible for monitoring video-based alarms and responding to events by following strict Standard Operating Procedures (SOPs). This includes voicing down via onsite speakers, notifying designated contacts, and documenting incidents. Success in this role depends on the ability to stay focused during repetitive monitoring tasks and maintain strict adherence to procedures in a high-security, 24/7 monitoring environment. JOB RESPONSIBILITIES • Monitor live video alarm events and follow established SOPs precisely, • Use speaker systems to perform real-time voice-downs to deter suspicious activity, • Notify clients, contacts, or emergency responders based on alarm response protocols, • Review recorded video clips to confirm events and initiate appropriate response, • Maintain accurate, time-stamped documentation for all alarm activity, • Identify and escalate unusual or emergency situations per SOP guidelines, • Ensure all alarms are processed within performance timeframes, • Stay informed of customer-specific instructions and site configurations, • Participate in training programs and system updates, • Strong attention to detail and sustained focus during repetitive tasks, • High level of procedural discipline and SOP compliance, • Clear and confident verbal communication, especially under pressure, • Ability to remain alert in low-stimulus environments, • Proficiency with video monitoring software and multi-screen systems, • Fast and accurate typing and documentation If you’ve always wanted to really make a difference, have your contributions mean something, and work for a place where loyalty, integrity, and hard work still means something, we want to hear from you! Powered by JazzHR yVgY8s3kwB

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance Qualifications • High School diploma AND Associate Degree or completed trade school study relevant toward CNC machine manufacturing., • 5-axis CNC milling machines controls, retrieve and run programs experience, • 5+ years experience with close tolerance CNC Milling Machines manufacturing: machine operation, programming, and cutting tool selection and maintenance, • CNC cutting tools (reamers, end mills, boring bars, taps, drills) experience, • Standard Operating Procedures experience, • Familiarity of G & M Code programming techniques (Heidenhain, Mazatrol) experience preferred, • Ability to read and understand blueprints and GD&T experience., • Measuring equipment experience (micrometers, calipers, gauge pins, go/no-go gauges, etc.)., • Previous race or production engine assembly or rebuilding experience, • Previous Aerospace or Defense industry experience (Deburr, and/or Assembly)Responsibilities:, • Collaborate with Manufacture Engineering to optimize machining processes, • Assist maintenance personnel with the diagnosis and correction of machine tool geometry, • Follow the production schedule and proactively verify machines are configured correctly, • SOPs and drawing set up instructions, load castings & raw materials, • Ensure all machines are running in accordance with the daily published schedule, • Perform required daily maintenance activities on assigned CNC machine, • Coordinate with the QC department to validate part quality from QC reports, • Document machine and automation robot issues, • Retrieve and/or build cutting

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated Dry Film Operator who is looking for an exciting and rewarding opportunity. The ideal candidate must be able to work in a fast-paced environment and show a true sense of urgency. The ideal candidate will be responsible for applying dry film photoresist on printed circuit boards, ensuring high-quality production while adhering to safety and quality standards. Essential Job Function: • Operate and maintain dry film application equipment, including lamination and exposure systems., • Prepare and mix dry film materials according to specifications., • Monitor the application process for consistency and quality control., • Conduct inspections to ensure that film adhesion and exposure are within required tolerances., • Troubleshoot and resolve equipment malfunctions or process issues., • Maintain accurate records of production runs, material usage, and any quality issues., • Follow all safety protocols and maintain a clean and organized work area. This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is Monday through Friday, 6:00 am - 2:30 pm. Requirements: Essential Qualifications, Education and Experience: • High school diploma or equivalent; technical degree preferred., • 1 year experience in PCB manufacturing, specifically with dry film processes., • Ability to read, write and communicate in English as needed for the position., • Ability to work overtime, weekends and holidays as needed, • Able to read and interpret blueprints, • Strong attention to detail and commitment to quality., • Ability to work in a fast-paced environment and manage multiple tasks., • Ability to stand for 8-12 hour. California Pay Range: $19.00 - $24.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Advanced PCB offers a variety of health and benefit programs. Which include Medical, Dental, Vision Insurance, HSA plans, Hospital and Accident plans, Life Insurance, PTO, Matching 401k, and Paid Holidays. About AdvancedPCB APCT, Advanced Circuits and San Diego are now unified as AdvancedPCB. Though the name is new, our commitment to our customers has remained unchanged. AdvancedPCB is the most comprehensive provider of printed circuit board solutions in the country. As a result of the combination of the capabilities of APCT, Advanced Circuits and San Diego PCB, AdvancedPCB offers competitive products for applications both large and small, and every interaction will be infused with our core belief that customer centricity is key. Today, more than 40 years after our founding, we are proud to be the nation’s leader in printed circuit board solutions, offering full-scale design, fabrication and assembly, consistently faster than the industry standard. We take pride in offering full-service solutions that meet the unique demands of any PCB customer need, while providing best-in-class customer service at every touchpoint. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us!

Job DescriptionSUMMARY The Plastic Injection Mold Operator: will tend or operate plastic injection-molding machine(s) to mold, form, or cast thermoplastic and thermoset materials. Feed plastic pellets into hopper of one or multiple molding machines. Injection molding operator also remove finished product and cut-away excess material, using knife or others hand tools. Process completed part and satisfactory pack for shipment and perform other related duties as required. ESSENTIAL DUTIES AND RESPONSIBILITIES • Following safety procedures to protect themselves and coworkers from injury., • Good mechanical abilities related to machinery and molds, • Use of precision measuring equipment: micrometers, calipers, comparator, vision system, • Ensure consistent quality components are produced that meet customer expectations., • Ensure proper equipment operation and preventative maintenance schedules are performed., • Track and monitor key performance indicators and take corrective action when necessary., • Compliance to Good Manufacturing Practices (GMP) and all documented procedures in the Quality Management System., • Perform other related duties and responsibilities as required., • Involvement in our continuous Improvement and safety initiatives, • Clean the machine and surrounding work areas to ensure the housekeeping and safety of the plant. Operate machine as assigned and assist co-workers at another workstation as needed., • Perform any secondary process., • Perform rework as necessary., • Clean work area during the shift or at the end of the shift, • Follow all safety Policies and procedures., • All other duties and responsibilities as assigned in support of the company's operations. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative, but not exclusive, of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE • High school diploma or equivalent, • A minimum of 6 months of manufacturing experience required, • Ability to understand written and verbal communication., • Ability to lift 50 lbs., • Manual and finger dexterity., • Strong attention to detail and accuracy. COMMUNICATION SKILL An ability to read and write and understand basic arithmetic. Must be able to follow verbal as well as written instruction. REASONING ABILITY Must be able to recognize machine messages, understand component defect awareness and effectively use various measuring tools as initial quality control OTHER SKILLS and/or ABILITIES • Must have excellent organizational skills with a commitment to meeting deadlines and expectations while ensuring overall quality of delivery, • Good manual dexterity, basic Math Skills and Quality Control skills and excellent hygiene are required, • May include light to medium lifting Work Schedule: Monday to Thursday 5am to 3:30pm (4/10's) ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Equal Employment Opportunity is an Equal Opportunity and Affirmative Action Employer. The Company is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. U.S. Citizenship/Permanent Resident is required for most positions. Job Posted by ApplicantPro

Job DescriptionThird Degree Sportswear, an innovative company that designs and manufactures unique custom sportswear. We are seeking operators for our new Sublimation Transfer Press AND a Dual Laser Cutting Machine. The main part of your job would be to set up orders, run complete orders, and bundle finished orders. We are hiring for two full time positions, the hours are 8:30 AM - 5:00 PM, M-F. Requirements/Qualifications: Must be able to load 60 lb rolls of paper onto a machine Fluent English communications skills (oral and written) Strong attention to detail and highly focused Ability to work in a fast paced environment, while maintaining speed and quality Ability to accept and adapt to quick changes in the workflow Generally good with use of shop tools and problem solving Willing to work overtime on short notice from time to time. Responsibilities Operate large format sublimation transfer press machine and Duel Laser Cutting Machine Handle Quality Control by pulling out defect panels Maintain inventory supplies for machines Trouble shoot problems with machines Perform routine maintenance and calibrate machines Willingness to help in other production departments as needed, including shipping and packaging. Preferred Skills but not required Bi-lingual (English/Spanish) Previous experience on either the Sublimation Transfer Press or our Dual Laser Cutter knowledge of Watscha Rip Software and Adobe Illustrator Reliable transportation, good driving record and ability to make local pickups for supplies NOTE: If you do not have experience on these machines, we may be willing to train. It would help if you have experience on other clothing manufacturing machines. In Closing: We have been in business for many years and have a great core group of employees. We all work well together and help each department out when necessary. We celebrate special occasions together and holidays. We are hoping to find two new employees who will be with us for a long time and enjoy what we think is a great company to work for.

Job Description NO EXTERNAL RECRUITERS PLEASE No Sponsorship/Transfer Available Company Summary: For over 60 years, MeriCal has been at the forefront of innovation in the dietary supplement industry, delivering custom manufacturing and packaging solutions with passion and precision. With state-of-the-art facilities in Southern California and Ogden, UT, we transform ideas into high-quality products—from research and development to the finished products. Our team, with over 30 years of combined experience, is dedicated to crafting exceptional gummies, probiotics, tablets, capsules, chewables, and powders using clinically backed ingredients. At MeriCal, we don’t just meet expectations—we exceed them, every time. Join us and be part of a dynamic, forward-thinking team shaping the future of nutrition! The Opportunity: We are seeking a Granulation Operator to support various machinery for agglomeration and particle sizing of raw materials, ensuring proper process controls like temperature, airflow, and spray rates. Key tasks include verifying materials, following manufacturing instructions, and ensuring the final product meets specifications for tablets, capsules, or powder blends. The operator is responsible for adhering to cGMP standards, safety practices, and coordinating with Quality Control on batch sign-offs. Additional duties include weighing blends and using metal detection and milling equipment when required. What You’ll Do: • Ability to operate machinery as necessary for agglomeration and particle sizing of formulated of formulated raw materials as per each batch record manufacturing instructions., • Operate and manage process controls, including inlet and outlet temperatures, air flow, dust collection (Magnehelic), solution preparation, spray rates, and spray nozzle calibration, for fluidized bed granulators., • Handle accessory bowls and dump stations, ensuring proper setup and operation., • Operate various blenders, including Hobart mixer, ribbon blender, twin shell blender, and Fitzmills, while adjusting speeds and screen sizes as needed., • Manage roller compaction equipment, adjusting rollers and screen sizes to achieve desired particle sizes., • Utilize oscillators for particle sizing, and apply manual granulation methods using trays, racks, and dryers as per batch specifications., • Keep attention to particle sizing detail to ensure mfg. instructions are properly executed is required which contributes to the overall ability to compress tablets, fill capsules, or provide powder blends according to customer specifications., • Verification of materials for each batch as per the batch record and sign off with a second person is required as materials are 'top loaded' into the mixers from staging area., • Lifting of materials within OSHA limits is required., • Sanitation, cGMP's, adherence to SOP's and safe work practices is always required., • Requires coordination with Quality Control on batch record signoffs and anything that violates cGMP's., • Must have ability to read and follow manufacturing instructions to property load raw materials (sequentially), close and seal Intel portholes and discharge valves, operate fluid bed and mixers for blending of raw materials and unload/discharge final product blends into sanitary containers., • Must weigh final blends using floor scales for calculation of outgoing yield versus incoming theoretical yield. Use of metal detection equipment, milling/particle sizing equipment including sieves/sifters is required as necessary. What You’ll Bring: • High School Diploma or Certificate; or 6 months to 1 year of related experience and/or training., • Must weigh final blends using floor scales for calculation of outgoing yield versus incoming theoretical yield. Use of metal detection equipment, milling/particle sizing equipment including sieves/sifters is required as necessary., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Must be able to read, write and speak English., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Familiar with the metric system., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems Involving several concrete variables in standardized situations., • Must be able to stand for 10 hours and able to lift 50lbs. Lifting of raw material containers that fall within OSHA limitations Is necessary. Accuracy and attention to detail is extremely critical., • Other activities include material handling using forklifts, electric and manual pallet jacks. Interface as either a checker or weigher to satisfy double checks and balances requirement and must be able to set up digital scales and wear a dust mask. The Perks: • No-cost vision insurance (yes, you read that right!), employer-paid life insurance, paid company holidays, generous paid time off, sick leave, employee assistance program, and a comprehensive wellness program., • Affordable medical and dental insurance plans tailored for you and your dependents., • Exceptional supplemental benefits, including Accident, Critical Illness, Hospitalization indemnity plans, and pet insurance., • 401(k) matching plan and more! A reasonable estimate of the current base pay range for this position is $18.00-$20.00 The compensation offered may vary depending on the candidate’s geographic region, job-related knowledge, skills, and/or education. MeriCal is an equal opportunity employer and is committed to providing a workplace that is inclusive and free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. We believe in creating a diverse and inclusive workplace where all employees feel valued and respected, and where differences are embraced as strengths. We are dedicated to fostering an environment that promotes equality and celebrates diversity. Qualified applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. Please contact if you need an accommodation due to a disability to complete an application, job interview, and/or to otherwise participate in the hiring process. This email does not respond to non-accommodations related requests. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: For more information about the categories of personal information we collect from you and how we use, sell, and share that information, please see our Privacy Notice for California Contractors and Privacy Notice for California Employees. 6:00AM-2:30PM

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity: The Senior Operator is the technical expert in the Screening department. Responsibilities include overseeing operational tasks, providing mentorship and technical guidance to team members, and collaborating closely with team leaders and managers to achieve production targets efficiently. What You'll Do: Operational Leadership: • Execute daily production tasks to meet quality and output targets., • Operate and maintain manufacturing equipment, ensuring adherence to operational procedures and safety protocols., • Collaborate closely with managers and team leaders to ensure production targets are met and challenges are addressed promptly., • Provide insights and recommendations to optimize processes and improve production efficiency., • Conduct regular inspections of products to maintain high standards of quality and compliance with specifications., • Uphold safety standards and environmental regulations, ensuring adherence across all operational activities., • Partner with the Team Leader to address performance issues and determine root causes., • Provide direct training and feedback to team members to enhance skills and productivity., • Regularly inspect equipment for defects or maintenance needs., • Report issues to management and assist and may assist in coordinating with the maintenance team for repairs., • Ensure compliance with company policies, safety regulations, and environmental guidelines., • Handle hazardous materials responsibly and promote a culture of safety awareness among team members. What You'll Bring:, • High school diploma or equivalent; additional education or training in manufacturing is preferred, • Proven experience in a manufacturing environment, with track record of achieving results and expertise in the department., • Strong understanding of PCB manufacturing, quality control principles, and safety procedures, • Excellent communication, interpersonal, and problem-solving skills, • Ability to work effectively in a fast-paced, dynamic environment, • Proficiency in basic computer skills and familiarity with manufacturing software applications is a plus Preferred Qualifications:, • Familiarity or experience in PCB Screening, • Experience with ProCIM Job Type:, • Full-Time / Permanent Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job DescriptionSUMMARY The Quality Inspector will evaluate product conformity by measuring or otherwise comparing product to customer requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform visual and precision mechanical inspection of raw materials and finished products., • Able to use standard mechanical measuring tools (Calipers, Micrometers, Plug & Ring Gages, Gage blocks, Height gage, etc.), • Ability to read and interpret engineering drawings, standards and specifications., • Familiar with ANSI/ASME Y14.5., • Proficient shop math skills, including some trigonometry., • Ability to prepare and complete documentation such as inspection reports using Microsoft Excel., • Ability to prepare and complete FAIs per AS9102 requirements, • Good communication skills and ability to coordinate interdepartmental tasks., • Identify quality issues and recommend corrective actions, • Ability to prioritize multiple assignments and exercise independent judgment., • All other dues and responsibilities as assigned by Supervisor. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Proficiency in English and basic computer skills, including the use of the internet and Microsoft Office, • Strong understanding of quality control standards and procedures, • Read and interpret blueprints, • Attention to detail, • Ability to work independently and as part of a team EDUCATION and EXPERIENCE • High school diploma or general education degree (GED); Bachelor's degree preferred, • Certification in quality control or inspection (ASQ CQI) is a plus, • 2+ years of experience in mechanical inspection or quality assurance, • Knowledge of AS9100, ISO 9001:2015, Lean Manufacturing, Quality Management Systems, Root Cause Analysis is a plus, • One-year-related experience and/or training; or equivalent combination of education and experience. Work Schedule: Monday to Thursday 6am to 4:30pm. Job Posted by ApplicantPro

Job DescriptionStep into a New Challenge Based in the Vibrant Anaheim, CA Area This isn’t just any role; it’s an opportunity to play a pivotal part in guaranteeing the precision and compliance of aerospace documentation. Your expertise will guide the final approval process, ensuring alignment with FAA, AS9100, ISO 9001, and ITAR regulations. Do you excel in detailed documentation and have a passion for upholding standards? Let's make an impact together. Daily Contributions • Generate and maintain precise inspection documentation, encapsulating all critical measurements and findings., • Craft and continuously enhance inspection procedures, COCs, and quality paperwork., • Ensure documentation is audit-ready in alignment with FAA, AS9100, and ISO 9001 mandates., • Handle the organization of documentation, adhering strictly to ITAR guidelines., • Conduct rigorous checks ensuring the integrity of all certification documents pre-shipment., • Coordinate with various teams including engineering and quality assurance to ensure up-to-date documentation. Essential Requirements: • 1–2 years working with document control or quality systems within regulated industries., • Background in aerospace, pharmaceuticals, or medical devices is advantageous., • Familiarity with Discus or ProShop systems., • Detailed knowledge of compliance standards and quality assurance frameworks., • Exceptional ability to organize and process detailed documentation efficiently., • Excellent communication skills, both written and verbal., • Integration into key aerospace projects that shape industries globally., • A positive, collaborative culture committed to performance excellence., • Quality Inspection Processes, • Data Analysis and Management, • Understanding AS9100 Protocols, • ITAR Compliance Knowledge, • Excellence in Quality Control, • ISO 9001 Certification Practice, • Quality Data Interpretation, • Management of Regulatory/Legal Documents, • AS9100 Application, • ITAR Compliance Certification Handling, • Analytical Software Utilization, • Proficient Blueprint Reading, • Fundamental Computer Abilities, • Coordinate Measuring Machines (CMM), • Gauge Instruments, • High Precision Tools such as Calipers and Micrometers

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated QC Inspector to join our growing company. The QC Inspector will inspect and evaluate final products to ensure compliance to customer requirements prior to delivery. Essential Job Function: • Perform Final Inspection on finished product to ensure compliance to customer requirements., • Read customer drawings, • Perform measurements with measurement tools such as calipers, micrometers, and pin gages., • Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding, • Verify acceptability of rework after completion, • Identify and mark non-conforming product to ensure it is not delivered, • Prepare standard and AS9102 First Article Reports as needed, • Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product, • Complete Deliverables for Customers and ensure they are complete and accurate, • Complete department logs and record yield data as required, • Perform preventative maintenance as defined by department maintenance schedule, • Support other work areas or departments as required by production or management., • Ability to work overtime as requested This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is Monday through Friday, 3:00 pm to 11:30 pm. Requirements: Essential Qualifications, Education and Experience: • High school diploma or equivalent, • One year of PCB manufacturing experience, • Knowledge of IPC-6012, or IPC-6013, • Knowledge of IPC-600, • Strong work ethic, • Excellent organizational and leadership skills., • Strong knowledge of complex board manufacturing including but not limited to, military rigid and rigid-flex board manufacturing., • Understanding of industry standards and specifications (IPC)., • Able to effectively communicate with management and supervisory staff., • Proficient computer skills with the ability to learn new software., • Prolonged periods sitting and performing visual and manual tasks., • Fine motor skills California Pay Range: $19.00 - $24.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Advanced PCB offers a variety of health and benefit programs. Which include Medical, Dental, Vision Insurance, HSA plans, Hospital and Accident plans, Life Insurance, PTO, Matching 401k, and Paid Holidays. About AdvancedPCB APCT, Advanced Circuits and San Diego are now unified as AdvancedPCB. Though the name is new, our commitment to our customers has remained unchanged. AdvancedPCB is the most comprehensive provider of printed circuit board solutions in the country. As a result of the combination of the capabilities of APCT, Advanced Circuits and San Diego PCB, AdvancedPCB offers competitive products for applications both large and small, and every interaction will be infused with our core belief that customer centricity is key. Today, more than 40 years after our founding, we are proud to be the nation’s leader in printed circuit board solutions, offering full-scale design, fabrication and assembly, consistently faster than the industry standard. We take pride in offering full-service solutions that meet the unique demands of any PCB customer need, while providing best-in-class customer service at every touchpoint. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us!

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off Qualifications • High School diploma AND Associate Degree or completed trade school study relevant toward CNC machine manufacturing., • 3 -axis CNC milling machines controls, retrieve and run programs experience, • 3-5+ years experience with close tolerance CNC Milling Machines manufacturing: machine operation, programming, and cutting tool selection and maintenance, • Ability to read and understand blueprints and GD&T experience., • CNC cutting tools (reamers, end mills, boring bars, taps, drills) experience, • Standard Operating Procedures experience, • Measuring equipment experience (micrometers, calipers, gauge pins, go/no-go gauges, etc.)., • Previous race or production engine assembly or rebuilding experience, • Previous Aerospace or Defense industry experience (Deburr, and/or Assembly)Responsibilities:, • Collaborate with Manufacture Engineering to optimize machining processes, • Assist maintenance personnel with the diagnosis and correction of machine tool geometry, • Follow the production schedule and proactively verify machines are configured correctly, • SOPs and drawing set up instructions, load castings & raw materials, • Ensure all machines are running in accordance with the daily published schedule, • Perform required daily maintenance activities on assigned CNC machine, • Coordinate with the QC department to validate part quality from QC reports, • Document machine and automation robot issues, • Retrieve and/or build cutting

Job DescriptionDescription: AdvancedPCB, a printed circuit board (PCB) manufacturer, is seeking a reliable, motivated Imaging Operator to join our growing company. The ideal candidates must be able to work in a fast-paced, team environment, show a true sense of urgency, and be willing to cross-train. Dry film photoresist is the key component used in the image transfer process. It is widely used in precision etching and electroplating products such as Printed Circuit Boards. The Imaging Technician will perform all aspects of this process. Essential Job Function: • Operate all department equipment, quality checks, preventative maintenance and minor repairs, • Enter jobs into the manufacturing tracking system, • Read and interpret shop order to verify that all previous operations were completed, to verify count and to verify quality This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is Monday night through Saturday morning, 11:00 pm to 7:30 am. Requirements: Essential Qualifications, Education and Experience: • High school diploma or equivalent, • Ability to read, write and communicate in English., • Ability to stand 8-12 hours throughout the shift., • Prolonged periods sitting and performing visual and manual tasks., • Fine Motor Skills California Pay Range: $19.00 - $25.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Advanced PCB offers a variety of health and benefit programs. Which include Medical, Dental, Vision Insurance, HSA plans, Hospital and Accident plans, Life Insurance, PTO, Matching 401k, and Paid Holidays. About AdvancedPCB APCT, Advanced Circuits and San Diego are now unified as AdvancedPCB. Though the name is new, our commitment to our customers has remained unchanged. AdvancedPCB is the most comprehensive provider of printed circuit board solutions in the country. As a result of the combination of the capabilities of APCT, Advanced Circuits and San Diego PCB, AdvancedPCB offers competitive products for applications both large and small, and every interaction will be infused with our core belief that customer centricity is key. Today, more than 40 years after our founding, we are proud to be the nation’s leader in printed circuit board solutions, offering full-scale design, fabrication and assembly, consistently faster than the industry standard. We take pride in offering full-service solutions that meet the unique demands of any PCB customer need, while providing best-in-class customer service at every touchpoint. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us!

Job Description NO EXTERNAL RECRUITERS PLEASE No Sponsorship/Transfer Available Company Summary: For over 60 years, MeriCal has been at the forefront of innovation in the dietary supplement industry, delivering custom manufacturing and packaging solutions with passion and precision. With state-of-the-art facilities in Southern California and Ogden, UT, we transform ideas into high-quality products—from research and development to the finished products. Our team, with over 30 years of combined experience, is dedicated to crafting exceptional gummies, probiotics, tablets, capsules, chewables, and powders using clinically backed ingredients. At MeriCal, we don’t just meet expectations—we exceed them, every time. Join us and be part of a dynamic, forward-thinking team shaping the future of nutrition! The Opportunity: We are seeking a Granulation Operator to support various machinery for agglomeration and particle sizing of raw materials, ensuring proper process controls like temperature, airflow, and spray rates. Key tasks include verifying materials, following manufacturing instructions, and ensuring the final product meets specifications for tablets, capsules, or powder blends. The operator is responsible for adhering to cGMP standards, safety practices, and coordinating with Quality Control on batch sign-offs. Additional duties include weighing blends and using metal detection and milling equipment when required. What You’ll Do: • Ability to operate machinery as necessary for agglomeration and particle sizing of formulated of formulated raw materials as per each batch record manufacturing instructions., • Operate and manage process controls, including inlet and outlet temperatures, air flow, dust collection (Magnehelic), solution preparation, spray rates, and spray nozzle calibration, for fluidized bed granulators., • Handle accessory bowls and dump stations, ensuring proper setup and operation., • Operate various blenders, including Hobart mixer, ribbon blender, twin shell blender, and Fitzmills, while adjusting speeds and screen sizes as needed., • Manage roller compaction equipment, adjusting rollers and screen sizes to achieve desired particle sizes., • Utilize oscillators for particle sizing, and apply manual granulation methods using trays, racks, and dryers as per batch specifications., • Keep attention to particle sizing detail to ensure mfg. instructions are properly executed is required which contributes to the overall ability to compress tablets, fill capsules, or provide powder blends according to customer specifications., • Verification of materials for each batch as per the batch record and sign off with a second person is required as materials are 'top loaded' into the mixers from staging area., • Lifting of materials within OSHA limits is required., • Sanitation, cGMP's, adherence to SOP's and safe work practices is always required., • Requires coordination with Quality Control on batch record signoffs and anything that violates cGMP's., • Must have ability to read and follow manufacturing instructions to property load raw materials (sequentially), close and seal Intel portholes and discharge valves, operate fluid bed and mixers for blending of raw materials and unload/discharge final product blends into sanitary containers., • Must weigh final blends using floor scales for calculation of outgoing yield versus incoming theoretical yield. Use of metal detection equipment, milling/particle sizing equipment including sieves/sifters is required as necessary. What You’ll Bring: • High School Diploma or Certificate; or 6 months to 1 year of related experience and/or training., • Must weigh final blends using floor scales for calculation of outgoing yield versus incoming theoretical yield. Use of metal detection equipment, milling/particle sizing equipment including sieves/sifters is required as necessary., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Must be able to read, write and speak English., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Familiar with the metric system., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems Involving several concrete variables in standardized situations., • Must be able to stand for 10 hours and able to lift 50lbs. Lifting of raw material containers that fall within OSHA limitations Is necessary. Accuracy and attention to detail is extremely critical., • Other activities include material handling using forklifts, electric and manual pallet jacks. Interface as either a checker or weigher to satisfy double checks and balances requirement and must be able to set up digital scales and wear a dust mask. The Perks: • No-cost vision insurance (yes, you read that right!), employer-paid life insurance, paid company holidays, generous paid time off, sick leave, employee assistance program, and a comprehensive wellness program., • Affordable medical and dental insurance plans tailored for you and your dependents., • Exceptional supplemental benefits, including Accident, Critical Illness, Hospitalization indemnity plans, and pet insurance., • 401(k) matching plan and more! A reasonable estimate of the current base pay range for this position is $18.00-$20.00 The compensation offered may vary depending on the candidate’s geographic region, job-related knowledge, skills, and/or education. MeriCal is an equal opportunity employer and is committed to providing a workplace that is inclusive and free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. We believe in creating a diverse and inclusive workplace where all employees feel valued and respected, and where differences are embraced as strengths. We are dedicated to fostering an environment that promotes equality and celebrates diversity. Qualified applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. Please contact if you need an accommodation due to a disability to complete an application, job interview, and/or to otherwise participate in the hiring process. This email does not respond to non-accommodations related requests. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: For more information about the categories of personal information we collect from you and how we use, sell, and share that information, please see our Privacy Notice for California Contractors and Privacy Notice for California Employees. 2:00PM-10:30PM

Job DescriptionThe primary function of a Machine Operator Packaging position is to set-up, monitor and adjust packaging equipment to bag and/or box finished products. Maintain proper weights, quality requirements and equipment checks/tests. A Machine Operator Packaging position is required to assist technicians in the tear down and assembly of bagger scales/conveyors. FUNCTIONAL RESPONSIBILITIES & DUTIES: • Works well with others, fostering a team atmosphere., • Maintains a clean, safe work area at all times., • Comply with all GMP requirements., • Perform metal detector checks as required., • Troubleshoot and correct basic equipment problems., • Ensure all code dates are correct., • Complete film changes on bagging machines and load boxes into packaging machines., • Complete all necessary paperwork accurately and submit to supervisor., • Monitors the equipment for any maintenance-related items that may affect the efficient production of quality products., • Monitors the equipment and the packaging procedure for safety and reports any issues to the supervisor., • Assist in the elimination of product waste packaging (over pack, product spilling from transfers, etc.), • Communicate changes to the incoming shift., • Able to set up your line and equipment.Report all operational issues to supervisor., • Complete training classes as required., • Ensure any packaging material is returned to staging area if not being used by incoming shift (film, shrink film, etc.), • Submit work orders when needed, with all the details concerning the problem., • Assist or oversee the training of new employees., • Assist with changeovers, machine setup and cleaning., • Ability to perform simple mathematical calculations., • Ability to read and record written instructions from an operator packaging check sheet., • Perform SPC (computer) data entry according to established process control procedures and product specifications., • Perform all appropriate Quality and Food Safety testing and documentation as required., • Ability to work independently., • Notify Supervision of any issues., • Must adhere/comply with all Company policies, procedures and practices., • Must be trained and demonstrate full understanding and competency in LOTO procedure EXPERIENCE: Some manufacturing experience in a food plant helpful. EDUCATION: High School or equivalent. PHYSICAL DEMANDS AND WORK ENVIRONMENT: While performing the essential duties of this job, the employee must be able to stand, stoop, kneel, crouch, climb and lift up to 50 lbs. and shared weight up to 100 lbs. Occasional exposure to airborne dust, high humidity and extremes of hot and cold are possible. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Job Type: Full time Pay: $17.91 per hour plus $1.50 shift differential Benefits: • 401(k), • Dental Insurance, • Health Insurance, • Vision Insurance, • Paid Time OffSchedule:, • 8 Hour Shift VEUCA7Okkw

Job Description NO EXTERNAL RECRUITERS PLEASE No Sponsorship/Transfer Available Company Summary: For over 60 years, MeriCal has been at the forefront of innovation in the dietary supplement industry, delivering custom manufacturing and packaging solutions with passion and precision. With state-of-the-art facilities in Southern California and Ogden, UT, we transform ideas into high-quality products—from research and development to the finished products. Our team, with over 30 years of combined experience, is dedicated to crafting exceptional gummies, probiotics, tablets, capsules, chewables, and powders using clinically backed ingredients. At MeriCal, we don’t just meet expectations—we exceed them, every time. Join us and be part of a dynamic, forward-thinking team shaping the future of nutrition! The Opportunity: We are looking for a Blending Operator to manage the blending of raw materials and ensure compliance with batch records and cGMP standards. This role involves operating twin shell mixers, weighing final blends, and using metal detection and milling equipment. The ideal candidate must accurately follow manufacturing instructions, maintain clean work areas, and keep precise documentation. Strong attention to detail, basic math skills, and the ability to lift up to 50 lbs are required. Previous experience in a similar manufacturing environment is preferred. What You’ll Do: • Operation of twin shell mixers. Verification of materials for each batch as per the batch record and sign off with a second person is required as materials are 'top loaded' into the mixers from the second-floor staging area., • Must have ability to read and follow manufacturing instructions to property load raw materials (sequentially), close and seal Intel portholes and discharge valves, operate twin shell mixers for blending of raw materials and unload/discharge final product blends into sanitary containers., • Must weigh final blends using floor scales for calculation of outgoing yield versus incoming theoretical yield. Use of metal detection equipment, milling/particle sizing equipment including sieves/sifters is required as necessary. Requires coordination with Quality Control on batch record signoMs and anything that violates cGMP's., • Complies with general cGMP's, follows S.O. P’s, and Master Batch Record Manufacturing Directions., • Screens pre-weighed raw materials into the blender using the vibratory screens., • Unloads blenders, weigh the final blend mix and top load mix in the mezzanine for overhead feeding the tablet presses., • Cleans and sanitizes blenders and auxiliary equipment, Cleans blender room and blender area., • Maintains all logbooks updated with the pertaining MBR information., • Accuracy and attention to detail is extremely critical. What You’ll Bring: • High School Diploma or Certificate; or 6 months to 1 year of related experience and/or training., • Ability to write routine reports and correspondence. Must be able to read, write and speak English., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Familiar with the metric system., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several concrete variables in standardized situations., • Must be able to stand for 8 hours and able to lift 50 lbs. Lifting of raw material containers that fall within OSHA limitations is necessary., • Other activities include material handling using forklifts, electric and manual pallet jacks. Interface as either a checker or weigher to satisfy double checks and balances requirement and must be able to set up digital scales and wear a dust respirator. The Perks: • No-cost vision insurance (yes, you read that right!), employer-paid life insurance, paid company holidays, generous paid time off, sick leave, employee assistance program, and a comprehensive wellness program., • Affordable medical and dental insurance plans tailored for you and your dependents., • Exceptional supplemental benefits, including Accident, Critical Illness, Hospitalization indemnity plans, and pet insurance., • 401(k) matching plan and more! A reasonable estimate of the current base pay range for this position is $18.00-$20.00 The compensation offered may vary depending on the candidate’s geographic region, job-related knowledge, skills, and/or education. MeriCal is an equal opportunity employer and is committed to providing a workplace that is inclusive and free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. We believe in creating a diverse and inclusive workplace where all employees feel valued and respected, and where differences are embraced as strengths. We are dedicated to fostering an environment that promotes equality and celebrates diversity. Qualified applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. Please contact if you need an accommodation due to a disability to complete an application, job interview, and/or to otherwise participate in the hiring process. This email does not respond to non-accommodations related requests. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: For more information about the categories of personal information we collect from you and how we use, sell, and share that information, please see our Privacy Notice for California Contractors and Privacy Notice for California Employees. Include shift schedule 6:00AM-2:30PM

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated Plating Operator to join our growing company. The Plating Operator will be working in a fast-paced, production environment. Knowledge of printed circuit boards is a plus. Essential Job Function: • Operate wet process equipment for PCB panel processing through functions that include manual copper plating, gold immersion, electroless copper, electrolytic gold, outer layer etching, and hot air level processing., • Set and maintain chemical processing equipment within operational parameters., • Carefully load racks in plating tanks while ensuring proper temperature/current of baths., • Load the line., • Work around chemicals and exercise safe chemical handling., • Follow customers’ specifications., • Ability to lift, pull, and push over 20 lbs., • Able to stand for long periods of time., • Maintains and cleans all department equipment., • Screwing in items by hand (Tightening clamps manually)., • Ability to work with hands for extended periods of time. This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends, when schedule details provided in advance. Work schedule is 3rd Shift | Monday night through Saturday morning, 11:00 pm to 7:30 am. Requirements: Essential Qualifications: • Qualifications to perform this job successfully, an individual must have a minimum of 3 years of experience in the printed circuit board industry and must be able to perform each duty satisfactorily., • High School diploma or equivalent experience in the PCB Industry., • Good written and verbal communications skills, • Must be able to multitask in a fast-paced environment., • Ability to lift, pull, and push over 20 lbs., • Able to stand for long periods of time Compensation: California Hourly Pay Range: $20.00 to $24.00 USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. About AdvancedPCB AdvancedPCB, with over 40 years of experience, is a leading manufacturer of high-reliability printed circuit boards. The company features six manufacturing sites: Aurora, Colorado, our headquarters, Santa Clara, two in Southern California, Maple Grove, Minnesota, and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Advanced PCB offers Medical, Dental, Vision Insurance as well as 401K. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us!

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company parties, • Competitive salary, • Health insurance, • Opportunity for advancement Se Habla Espanol We are fast paced cabinet manufacturing company in North Orange County, CA seeking to fill multiple positions: Full-time: Machine Operator - 1st Shift - 5:00am - 1:30pm plus overtime. Machine Operator - Computer operated, wood cutting machines and edgebanders. Experience with Biesse machines a plus. Able to inspect own work for quality assurance. CNC operations. Must have high attention to detail Good verbal and written communication skills. Quality Assurance Bilingual English and Spanish helpful. Organized Team player Positive attitude and passion for the work we perform Reliable transportation Wage will depend on your experience Minimum 1 year experience

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The Manufacturing Operator position offers a great entry point into a high-tech manufacturing environment. In this role, you will be trained to perform a variety of hands-on tasks in the production of printed circuit boards. You'll contribute to the quality and precision that define Pioneer Circuits' products while gaining experience/exposure across different areas of the manufacturing process, from warehouse and material issue, to operating manufacturing machines and conducting quality inspections. If you're reliable, eager to learn, and excited about working on products that support national security and space exploration—this is the opportunity for you. Based on your skills, experience, and interests, you'll be matched to a specific manufacturing role within our operations. What You'll Do: • Assist in the production, assembly, inspection, or testing of circuit board components, • Follow detailed work instructions, procedures, and safety guidelines to complete assigned tasks, • Operate manual or semi-automated equipment depending on role placement, • Handle materials and components carefully to ensure product quality, • Maintain cleanliness and organization of the work area, • Work with team members and management to meet production goals and timelines, • Learn and apply quality standards and process controls, • Perform basic documentation of completed tasks or inspection results, • A willingness to learn and grow in a high-tech manufacturing environment., • Ability to have reliable attendance and be consistently on time for scheduled shifts. Punctuality and dependability are essential to meet production goals and maintain workflow., • Strong attention to detail and ability to follow instructions precisely., • Good manual dexterity and hand-eye coordination., • Dependability, a positive attitude, and a strong work ethic., • Ability to work independently and as part of a team., • High school diploma or GED required., • Prior manufacturing or warehouse experience is a plus but not required—we provide training!, • Ability to read, write, and communicate effectively in English., • Positions are offered on one of these shifts:, • 1st shift (7:30 am- 4:00 pm), • 2nd shift (4:00 pm-12:30 pm), • 3rd shift (12:30 am-7:30 am), • Monday to Friday, • Overtime as needed The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job DescriptionDescription: Position Summary The Machinist – Milling Specialist supports aerospace manufacturing by operating CNC and manual milling equipment to produce high-precision components that meet strict FAA, AS9100, and customer-specific aerospace requirements. This role ensures accuracy, quality, and compliance with all industry standards while contributing to a safe and efficient production environment. Key Responsibilities • Edit programs, set up, and operate complex CNC machines, including multi-axis mills and multi-tasking mill-turns (Mazak, WFL)., • Work with ultra-precision tolerances (±.0005” or tighter) on complex aerospace components., • Select proper tooling, fixtures, cutting parameters, and machining strategies for aerospace components., • Perform tool offsets, adjustments, and changeovers to maintain precision within tight tolerances., • Inspect parts using calipers, micrometers, gauges, CMM data, and other aerospace-approved metrology tools., • Maintain documentation for AS9100 compliance, including traceability and production records., • Conduct routine preventative maintenance and ensure machines operate at optimal levels., • Identify machining issues and collaborate with engineering and quality teams to resolve discrepancies., • Maintain a clean, organized workspace aligned with 5S and continuous improvement practices. Qualifications Education & Experience: • High school diploma or GED required; technical training in machining preferred., • Minimum 2-4 years of milling or precision machining experience, preferably in aerospace manufacturing., • Experience in machine aerospace materials and working to AS9100 or FAA standards strongly preferred Skills & Competencies: • Strong knowledge of milling operations, tooling, feeds, and speeds., • Ability to read complex aerospace drawings and GD&T requirements., • Proficiency with precision measuring equipment and inspection documentation., • Strong attention to detail and commitment to producing flight-critical components., • Ability to work independently and collaborate across production, quality, and engineering teams. Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job Description NO EXTERNAL RECRUITERS PLEASE No Sponsorship/Transfer Available Company Summary: For over 60 years, MeriCal has been at the forefront of innovation in the dietary supplement industry, delivering custom manufacturing and packaging solutions with passion and precision. With state-of-the-art facilities in Southern California and Ogden, UT, we transform ideas into high-quality products—from research and development to the finished products. Our team, with over 30 years of combined experience, is dedicated to crafting exceptional gummies, probiotics, tablets, capsules, chewables, and powders using clinically backed ingredients. At MeriCal, we don’t just meet expectations—we exceed them, every time. Join us and be part of a dynamic, forward-thinking team shaping the future of nutrition! The Opportunity: The Encapsulation Operator is responsible for operating and maintaining semi-automatic (Model 10) and high-speed (Bosch) encapsulation machines in compliance with cGMP standards, SOPs, and Master Batch Records. This role involves machine setup, disassembly, cleaning, and reassembly, as well as accurate capsule filling, inspection, and documentation. Precision, attention to detail, and coordination with Quality Control are essential to ensure product quality and regulatory compliance. What You’ll Do: • Set up the capsule machines with the proper tooling required as per the MBR specifications, and manufacturing directions, following the specific S.O.P for the department, guided by the cGMP's., • Reassembly of parts mentioned and filling of blended materials into the product hopper manually with a sanitary product scoop. Also, fill an empty capsule hopper with capsules from supplier box into the capsule hopper., • Cleaning of the tabletop surface and machine guard doors and windows must be performed before reassembly occurs. Only a qualified operator or mechanic is authorized to make machine adjustments on segments, tamping rods and pins. This is an expensive and complex, yet delicate machine., • Adjust and set up machines to obtain the proper fill weight as specified in the MBR., • Operate and clean metal detectors and capsule polishers as necessary. Fill sanitary containers with finished capsules., • Visually inspects finished capsules for minor or major defects, including color shifts and particle size separation., • Requires coordination with Quality Control on batch record signoff s and anything that violates cGMP's., • All tabletop surface areas and base cabinet walls must be cleaned, and sanitized., • Accuracy and attention to detail is extremely critical. What You’ll Bring: • High School Diploma/Certificate; or six months to one-year related experience and/or training; or equivalent combination of education and experience., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence. Must be able to read, write and speak English., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs. Familiar with the metric system., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems Involving several concrete variables in standardized situations., • Must be able to stand for 10 hours and able to lift 50lbs. Lifting of raw material containers that fall within OSHA limitations Is necessary., • Other activities include material handling using forklifts, electric and manual pallet jacks. Interface as either a checker or weigher to satisfy double checks and balances requirement and must be able to set up digital scales and wear a dust respirator. The Perks: • No-cost vision insurance (yes, you read that right!), employer-paid life insurance, paid company holidays, generous paid time off, sick leave, employee assistance program, and a comprehensive wellness program., • Affordable medical and dental insurance plans are tailored for you and your dependents., • Exceptional supplemental benefits, including Accident, Critical Illness, Hospitalization indemnity plans, and pet insurance., • 401(k) matching plan and more! A reasonable estimate of the current base pay range for this position is $18.00-$20.00. The compensation offered may vary depending on the candidate’s geographic region, job-related knowledge, skills, and/or education. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: MeriCal is an equal opportunity employer and is committed to providing a workplace that is inclusive and free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. We believe in creating a diverse and inclusive workplace where all employees feel valued and respected, and where differences are embraced as strengths. We are dedicated to fostering an environment that promotes equality and celebrates diversity. Qualified applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. Please contact if you need an accommodation due to a disability to complete an application, job interview, and/or to otherwise participate in the hiring process. This email does not respond to non-accommodations related requests. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: For more information about the categories of personal information we collect from you and how we use, sell, and share that information, please see our Privacy Notice for California Contractors and Privacy Notice for California Employees. 2:00PM-10:30PM

Job DescriptionSUMMARY Deflash & Deburr is the Finishing method used to remove burrs and sharp edges on parts created by our machines. They are responsible for Maintaining a safe, organized, and clean work area. Perform additional tasks as assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES • Setup and removal of burrs or sharp edges., • Visual inspection of each part using calipers., • Read computerized work instructions., • Remove raised particles and shavings that appear on parts., • Repetitive filing or use of a grinder to smooth away nicks and fragments., • Sanding by hand or sanding with a pneumatic hand tool for more troublesome deformities., • Wash and polish parts prior to submitting for inspection., • Audit and order materials needed for deburring activities, • Ensure deburred parts are within tolerances and coincide to print specifications., • Measure and document when required that parts meet dimension requirements., • Send the first deburr article to quality control inspector., • Make any necessary adjustments per the inspector., • Receive final "buy-off" from inspector and debur remaining parts., • Upon completion of deburring, organize parts and send to next operation., • Maintain work area safe, organized and clean, • All other duties and responsibilities as assigned in support of the company's operations. REASONING ABILITY, • Ability to interpret a variety of instructions (written and oral)., • Critical Thinking skills required. COMMUNICATION SKILLS • Ability to communicate effectively and professionally. EDUCATION and EXPERIENCE • High school diploma or equivalent, • 1-2 plus years previous experience working in Manufacturing (Aerospace preferably)., • Must have basic computer skills, data entry is required to track the production floor., • Strong mechanical aptitude., • Team player., • Mechanically inclined and self-motivated., • Excellent work ethic and safety minded., • Excellent visual acuity and manual dexterity., • Requires working in ambient air temperature. Job Posted by ApplicantPro

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity The AOI Operator performs inspection on PCB layers using an Automatic Optical Inspection Machine. The AOI Operator completes a variety of tasks to complete the inspection of inner and outer layer PCB boards including using a post-etch punch machine, inspecting circuits through a microscope, and using software programs to operate inspection machines. Please Note: The available work schedule consists of second-shift hours (4:00pm - 12:30am); however, training will take place during the first shift (7:30am - 4:00pm). What You'll Do: • Operates and maintains the Automatic Optical Inspection Machine, VR and CDR Machine, including start-up, shutdown and performs basic, routine and preventive maintenance, • Inspects layers before and after processing through the AOI machine for layer count, handling damage, inspection parameters, etc., • Processes inner layers of PCB panels through the Post-Etch Punch Machine, • Enters inspection parameters into AOI machine and processes, • Processes new jobs by importing CAM files from Genesis software, transferring them to the CDR machine and then to the AOI machine., • Measures thickness of inner layers to verify with traveler, • Verifies layers for proper dot/detect application and visual non-conformances, • Verifies inspected layers to detect location, confirmation and definitions, inner layer reworks, and any defects, • Operates VR machine to inspect defects detected through AOI, • Ability to read and interpret documents such as standard operating procedures, instructions and safety rules in English to the degree necessary to perform the job, • Ability to work in a fast-paced environment, • Good communication and interpersonal skills, • Excellent attendance and punctuality, • Ability to work overtime as required, • Proficient using a computer, • Detail-oriented and self-motivated, • High School Diploma Required, • 1-2 Years of related experience preferred but not required Schedule: • 2nd Shifts: 4:00pm to 12:30am, • Monday to Friday Job Type: Full-time/Permanent California Pay Range$17—$19 USD The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job Description Overview: We are seeking a skilled and experienced Seamstress with formal wear experience to join our team. As a Thimble Seamstress, you will be responsible for providing excellent customer service and performing alterations and repairs on garments at your home workspace. Requirements: * You must own a sewing machine at home, as this is a work from home position. * At least 3 Years experience as a seamstress/performing formal dress alterations. * Proven experience working with Bridal, Prom or Evening Dresses is preferred. * Proficiency in using sewing machines and other alteration tools. * Strong knowledge of garment construction techniques. * Excellent attention to detail and ability to perform precise measurements. * Basic math skills for measuring and calculating fabric requirements. * Ability to maintain high-quality standards. * Strong communication and customer service skills. Responsibilities: * Perform alterations and repairs on garments, including hemming, taking in or letting out seams, working with multiple laters and replacing buttons or zippers. * Use sewing machines, hand tools, and other equipment to complete tailoring tasks. * Provide exceptional customer service by assisting our customers with fitting and ensuring their satisfaction with the finished product. * Take accurate measurements from customers during fittings. * Maintain a clean and organized work area at home where the work is done. If you have a passion for fashion, excellent sewing skills, and enjoy working with customers, we would love to hear from you. Join our team as a work from home Seamstress and contribute to improving garments for our valued customers.

Job DescriptionDescription: AdvancedPCB is seeking a reliable, motivated Automatic Optical Inspection (AOl) Operator to join our growing company. The AOl Operator will scan cores and panels on automatic optical inspection. In addition, they will verify defects determining the disposition of the work and perform the rework in accordance with AOI inspection and rework instructions. Essential Job Function: • Operate AOI and Rework department equipment., • Perform preventative maintenance as defined by the department maintenance schedule., • Select data from the database per work instructions., • Scan and verify cores and panels using acceptability criteria found in the AOl inspection and rework instructions., • Perform manual Rework as required by instructions., • Perform Rework using Trace Welding equipment., • Verify Acceptability of Rework after completion., • Support other work areas or departments as required by production or management. This is a full-time position requiring available to work during standard business hours and mandatory weekend overtime when needed to meet production goals. Shifts may include weekends when schedule details are provided in advance. Work schedule is 3rd Shift | Monday night through Saturday morning, 11:00 pm to 7:30 am. Requirements: Essential Qualifications, Education and Experience: • High school diploma or equivalent, • 1 year of PCB manufacturing experience, • Strong work ethic, • Ability to work effectively in a team environment., • Proficient verbal and written communication skills, • Prolonged periods sitting and performing visual and manual tasks., • Fine Motor Skills California Pay Range: $19.00 - $24.00 per hour USD | DOE The actual compensation offered is based on a wide array of factors unique to each candidate, including but not limited to skill set, years and depth of experience, certifications, and other relevant business considerations. Advanced PCB offers a variety of health and benefit programs. Which include Medical, Dental, Vision Insurance, HSA plans, Hospital and Accident plans, Life Insurance, PTO, Matching 401k, and Paid Holidays. About AdvancedPCB APCT, Advanced Circuits and San Diego are now unified as AdvancedPCB. Though the name is new, our commitment to our customers has remained unchanged. AdvancedPCB is the most comprehensive provider of printed circuit board solutions in the country. As a result of the combination of the capabilities of APCT, Advanced Circuits and San Diego PCB, AdvancedPCB offers competitive products for applications both large and small, and every interaction will be infused with our core belief that customer centricity is key. Today, more than 40 years after our founding, we are proud to be the nation’s leader in printed circuit board solutions, offering full-scale design, fabrication and assembly, consistently faster than the industry standard. We take pride in offering full-service solutions that meet the unique demands of any PCB customer need, while providing best-in-class customer service at every touchpoint. ITAR Compliance Requirement: This position requires access to controlled technical data and/or participation in activities subject to the International Traffic in Arms Regulations (ITAR). As such, all applicants must be U.S. persons, as defined by ITAR (U.S. citizens, U.S. lawful permanent residents, or individuals with refugee/asylee status). Candidates who do not meet ITAR eligibility requirements will not be eligible for employment in this position. AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC). Visit us!

Job Description NO EXTERNAL RECRUITERS PLEASE No Sponsorship/Transfer Available Company Summary: For over 60 years, MeriCal has been at the forefront of innovation in the dietary supplement industry, delivering custom manufacturing and packaging solutions with passion and precision. With state-of-the-art facilities in Southern California and Ogden, UT, we transform ideas into high-quality products—from research and development to the finished products. Our team, with over 30 years of combined experience, is dedicated to crafting exceptional gummies, probiotics, tablets, capsules, chewables, and powders using clinically backed ingredients. At MeriCal, we don’t just meet expectations—we exceed them, every time. Join us and be part of a dynamic, forward-thinking team shaping the future of nutrition! The Opportunity: The Coating Operator oversees coating pan systems, ensuring optimal performance by checking and calibrating critical parameters such as inlet/outlet temperatures, airflow, mist checker flow meters, gear pump and spray rates, atomized air flow, dust collection magnehelic readings, filter conditions, and spray bar alignment. Maintains strict compliance with cGMP standards, following all Standard Operating Procedures (SOPs) and Master Batch Record (MBR) instructions. What You’ll Do: • Maintain and present scorecard/metrics/demand forecasts that track progress/challenges/future growth for dedicated accounts., • Lead cross-functional meetings related to customer orders, prioritization, resolving customer issues., • Make coating solutions as required, (clear or color) load tablet boxes through frontal porthole, operate aqueous coating machines and maintain attention time to process variables and the indicators, (gauges, meters, control knobs and valves) that are provided., • Upon completion of coating cycle, cool down tablet bed, and polish tablets if applicable. Coordinate testing of disintegration time and appearance results with Quality Control to ensure customer specifications are achieved., • Add, calibrate, set up and pass coated tablets through metal detector into a clean plastic lined container., • Requires coordination with Quality Control on batch record sign offs and anything that violates cGMP's., • Accuracy and attention to detail is extremely critical. What You’ll Bring: • High School Diploma or Certificate; or 6 months to 1 year of related experience and/or training., • Ability to read and interpret documents such as safety rules, operating and maintenance Instructions, and procedure manuals. Ability to write routine reports and correspondence. Must be able to read, write and speak English., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage and to draw and interpret bar graphs. Familiar with the metric system., • Must be able to stand for 10 hours and able to lift 50lbs. Lifting of raw material containers that fall within OSHA limitations is necessary., • Other activities Include material handling using forklifts, electric and manual pallet jacks. Interface as either a checker or weigher to satisfy double checks and balances requirement and must be able to set up digital scales and wear a dust respirator. The Perks: • No-cost vision insurance (yes, you read that right!), employer-paid life insurance, paid company holidays, generous paid time off, sick leave, employee assistance program, and a comprehensive wellness program., • Affordable medical and dental insurance plans tailored for you and your dependents., • Exceptional supplemental benefits, including Accident, Critical Illness, Hospitalization indemnity plans, and pet insurance., • 401(k) matching plan and more! A reasonable estimate of the current base pay range for this position is $18.00 to $20.00. The compensation offered may vary depending on the candidate’s geographic region, job-related knowledge, skills, and/or education. MeriCal is an equal opportunity employer and is committed to providing a workplace that is inclusive and free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We encourage individuals of all backgrounds to apply. We believe in creating a diverse and inclusive workplace where all employees feel valued and respected, and where differences are embraced as strengths. We are dedicated to fostering an environment that promotes equality and celebrates diversity. Qualified applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and/or certain state or local laws. Please contact if you need an accommodation due to a disability to complete an application, job interview, and/or to otherwise participate in the hiring process. This email does not respond to non-accommodations related requests. MeriCal uses E-Verify to confirm authorization to work in the United States. For more information on E-Verify, please visit the following website: For more information about the categories of personal information we collect from you and how we use, sell, and share that information, please see our Privacy Notice for California Contractors and Privacy Notice for California Employees. 2:00PM-10:30PM

Job Description Job Summary Responsible for inspection and creation of First Article Inspection reports to ensure customer requirements. The Inspector is also responsible to record and report any defects and ensure the defects are corrected before the finalization of the FAI. Committed member to the Quality and Production teams and adaptable to changing roles within the Quality function. Primary Responsibilities • Carries out and coordinates all inspection and test requirements as outlined in the Quality Procedure Manual and contract requirements including compliance with the requirements of AS9100 and AS9102 standards., • Maintains relevant updated specification, standard and quality systems documents., • Inspects visually for defects., • Compares results with drawing and specification requirements., • Reports problems with inspection and test results to Quality Supervisor., • Identifies defective parts and segregates from acceptable product., • Notifies Quality Supervisor and Quality Engineer when inspection data exceeds acceptable limits or when major incidents of poor quality are noted., • Records results on inspection forms or charts and report number of defects found., • Supports the quality record retention requirements., • Working knowledge of Quality Assurance standards., • Excellent verbal and written communication skills in English., • Proficiency in GD&T. Ability to read blueprints., • Good interpersonal skills and ability to work as a team member, as well as independently., • Ability to communicate with all levels within Productions and get messages across that has the desired effect., • Ability to think critically and act logically to evaluate situations and generates required steps to ensure success., • Persistence and determination when problem-solving., • Strong focus on quality: ability and commitment to achieve total customer satisfaction in the quality of our products, services and decisions, implement systems and processes focused on excellence and continuous improvement., • Strong focus on safety, including personal safety, safety of co-workers, and protection of property on the job in accordance and compliance with company practices, industry standards, and government regulations., • Strong knowledge of AS9100 and AS9102 Quality Systems., • Knowledge of calibration requirements/procedures., • Proficiency with different gages (e.g. calipers, pin gages, radius gages, snap gages, etc.), • Customer Focus - Knows and understands the needs of internal and external customers. Is results oriented and works hard to consistently provide exceptional service., • Ethics and Values - Adheres to an effective set of core values and beliefs and acts in accordance. Rewards the right values and disapproves of others., • Problem Solving - Looks beyond the obvious to find effective solutions., • Integrity and Trust - Widely trusted and seen as direct and truthful., • Functional/Technical Skills - Possesses the skills to be effective in the job. Has the skills to perform the job at a high level of accomplishment., • Listening - Practices active and attentive listening, able to hear others., • Action-oriented - Full of energy, willing to take action., • Composure - Cool under pressure, not knocked off balance by the unexpected, is a settling influence., • Values Diversity - Supports fair and equal treatment for all. Education/Previous Experience Requirements • High School Degree or equivalent strongly preferred., • Minimum of three years successful employment as an individual contributor with a preference for manufacturing experience., • Experience in Quality Assurance is preferred., • 1st Article experience, preferably more than a year., • Familiar with AS9102 Rev. C forms., • Experience with GE, Middle River, and/or Collins preferred. Kirkhill, Inc. is proud to be an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. All successful candidates must submit to post offer pre-employment physical examination, drug/alcohol screen and background check as a condition of employment. Job Posted by ApplicantPro

Job Description Summit Anaheim currently has an open position for a Final Inspector (1st shift). Summit Interconnect is a manufacturer of advanced technology printed circuit boards with a specific focus on complex rigid and rigid-flex product with unique expertise in RF/Microwave applications. Position Summary: The Final Inspector is responsible for inspection of product after processes and at final inspection. This position requires attention to detail, good communication skills, and the ability to read and understand technical requirements of the traveler and blueprint. Qualifications: To perform this job successfully, an individual must have a minimum of three (3) years’ in the printed circuit board industry and must be able to perform each essential duty satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Required Skills: Responsibilities: • Read, understand, and interpret travelers and drawings provided to assess requirements and special instructions required for jobs., • Inspects product to determine compliance with order specifications and the inspection checklist for conformity to specified standards., • Experience inspecting Flex-Rigid PWBs., • Rework experience., • Inspects product under magnifying tool for opens and shorts in circuit patterns., • Compares size and location of holes to verify conformance to specifications., • Views inside of holes to detect voids or irregular surfaces., • Identifies non-conforming product and its disposition., • Stamps mark of approval or rejection on product or traveler., • Logs job in and out with accurate counts of product., • Records yield data and completes scrap report forms., • Stacks finished boards with separator sheets for transfer to next workstation., • Perform other department or company-related tasks at the direction of the department Supervisor. Education / Experience: • High School Diploma or equivalent., • Three (3) year minimum PWB experience., • Employee is regularly required to sit throughout the shift., • Employee must frequently lift and/or move up to 20 lbs., • Specific vision abilities required by this job include close vision. ITAR Compliance Notice This position requires compliance with the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be a U.S. citizen, U.S. lawful permanent resident (e.g., "Green Card" holder), asylee, or refugee as defined by 8 U.S.C. 1324b(a)(3). Applicants who do not meet this requirement may not be eligible for employment in this position. Summit Interconnect is an Equal Opportunity Employer We are committed to fostering an inclusive and diverse workplace where everyone is valued and respected. We provide equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other legally protected characteristic

Job Description PRIMARY PURPOSE OF JOB: Process orders of parts through nital etch/temper etch/ammonium persulfate etching operations per shop traveler requirements and interpret results of testing. PRINCIPAL DUTIES/KEY RESULTS REQUIRED: • Rack and prepare parts for processing through the nital etch line, • Prepare parts for nital etch processing by abrasive blasting and glass bead cleaning, • Interpret accurate results from the nital etch process, • Recognize real and false indications and be able to distinguish between, • Report results of testing on shop traveler, • Package and prepare parts for embrittlement relief following nital etching, • Perform other duties as assigned by foreman. WILL ACT AS BACK UP FOR THE FOLLOWING: MAG General Helper I, II, and III SUPERVISION OF OTHERS: Only as needed to prepare parts for processing and post-processing bake operation. POSITION REQUIREMENTS: • Ability to speak, read, write, and understand the English language., • Ability to follow written instructions, specifications, and procedures., • Ability to understand basic drawings and sketches., • Pass an annual vision test consisting of ability to read Jaeger #1 at a distance of at least 12 inches., • Pass written and practical examinations on an annual basis with a score of at least 80 percent., • Have no physical limitations that would interfere with ability to lift, carry, and suspend parts on hooks, racks, and baskets during the processing and examination of parts., • Ability to work around hazardous chemicals and loud noises., • Knowledge of safety laws and issues We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 2:30PM - 11:00PM

Job Description About Pioneer Circuits Since its establishment in 1981, Pioneer Circuits has been leading the way in technology solutions for mission-critical systems. As the leading, privately held U.S. manufacturer of innovative high-performance flexible circuit boards, we are dedicated to the design, production, and assembly of advanced printed circuit board assembly (PCBAs) technology solutions. We develop cutting-edge solutions that explore new frontiers, serve and protect our armed forces and allies, safeguard national security against evolving threats, and propel advancements in hypersonic technology. Our customers include some of the largest aerospace and defense companies like RTX, Lockheed Martin, GE Aerospace, NASA, JPL, Northrop Grumman, and Boeing. About the Opportunity: The Final Inspector is responsible for performing visual inspections of PCB bare boards after completion of all processes per standard operating procedures and guidance from the Team Leader. The Final Inspector also stamps the Group A Lot Acceptance Inspection Sheet, Traveler, or rework instruction as required after completing visual inspections. What You'll Do: Read and interpret standard operating procedures and traveler to verify lot number and panel quantity; ensure that the previous operation was completed, signed, and dated on the traveler • Perform a variety of repetitive visual and mechanical in-process inspections to ensure the product complies with order specifications and conformity to specified quality standards, • Inspect holes, thickness, markings, and conductive patterns using the required equipment and confirm that product is defect-free, • Identify non-conformances and inform the team leader, • Stamps and date travelers, • Experience in PCB final inspection, • Hands-on knowledge of flex and rigid-flex printed circuits, IPC-6012, IPC-6013, IPC-610, and military specifications such as MIL STD P-55110, P-50884, and P-31032, and J STD, • Ability to detect PCB defects, • Ability to read and interpret documents such as standard operating procedures, traveler instructions, technical requirements, blueprints, quality processes and safety rules in English, • 8-hour shift, • Monday to Friday (7:30 AM to 4:00 PM) Pioneer Circuits provides a comprehensive benefits package for all full-time roles, encompassing healthcare, dental, and vision insurance for employees and eligible dependents. Additionally, employees enjoy paid vacation, paid holidays, and a 401(k) plan + company match, along with various voluntary benefits options. This is an ITAR-controlled facility. As such, all applicants must be U.S. citizens or lawful permanent residents. Employment eligibility will be verified through the E-Verify system as part of the hiring process. Pioneer Circuits is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, gender identity, or any other factor protected by applicable federal, state, or local laws.

Job DescriptionDescription: Cristek is a Qnnect Company, a portfolio company of Arcline Investment Management, with revenues above $80 million and ~350 employees across multiple locations. Cristek manufactures electrical connectors, cable assemblies, harnesses, and related electro-mechanical products, and holds multiple quality certifications including AS9100 & ISO 9001. Cristek, established in 1985, is headquartered in Anaheim, CA with divisions in North Billerica, MA and Minden, NV. SUMMARY OF FUNCTIONS Maintains quality standards by approving incoming materials and recording quality results. Analyzing information, reporting research results, documentation skills, promoting process improvement, safety management, managing processes, manufacturing methods and procedures. DUTIES AND RESPONSIBILITIES • Approves incoming materials by confirming specifications; conducting visual and measurement tests; rejecting unacceptable materials., • Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database., • Keeps measurement equipment operating by following operating instructions, calling for repairs., • Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations., • Involves working with Engineering and other departments to evaluate products and report results., • Updates job knowledge by participating in educational opportunities; reading technical publications., • Accomplishes quality and organization mission by completing related results as needed., • Other duties as assigned.Requirements: EDUCATION AND EXPERIENCE • High School Diploma or equivalent, • Minimum of 2-3 years inspection experience. Experience working with electrical harnesses and/or connectors is preferred. Working knowledge of using video measuring systems is desirable., • Should be familiar with AS9100 and/or ISO 9001., • Must be proficient with Microsoft Office applications (Word, Excel, Outlook), • Must have a good understanding of Geometric Dimensioning & Tolerancing (GD&T) and use of vision systems and/or coordinate measuring equipment., • Must be proficient working with basic precision measuring instruments such as calipers, micrometers, dial/digital indicators, height gages, thread gages, pin gages, etc., • Must have experience performing first article inspection in accordance with AS9102 or equivalent., • Must be comfortable working with binocular microscopes for extended periods, • Must be able to pass Visual Acuity requirements (color, depth perception and field of vision), • Ability to read, comprehend and follow verbal and written instructions., • Must follow strong safety standards, • Must possess attention to detail, • Strong interpersonal skills and ability to work in a team., • Ability to work independently, focus, organize work, and complete assignments on time., • Sitting and standing for long periods. This position requires use of information which is subject to compliance with the International Traffic in Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. At Cristek, we strive to create an inclusive and supportive work environment, and our benefits package reflects this commitment. Some of our benefit offerings include: • Insurance benefits: We provide our employees with access to comprehensive medical, dental, and vision insurances to ensure they can prioritize their health and well-being., • Paid Time Off (PTO): We believe in the importance of work-life balance, so we offer generous PTO allowances that accrue with each pay period so that our employees can rest and recharge, spend time with family and friends, or pursue personal interests., • Paid Holidays: We recognize the importance of spending time with loved ones during holidays, so our employees receive paid holidays to celebrate and enjoy these moments., • Growth Participation Units (GPUs): We provide growth participation units (GPUs) to our employees, which represent a share of the company's growth and success. Our GPUs are issued to all employees and as we increase the value of our business, they grow in value as well. When the private equity firm that currently owns us sells the company, GPUs will be paid out, with all employees sharing in the profits from the sale., • 401(k) Matching: We offer up to 4% of 401(k) matching to help our employees save for their future., • Short-Term & Long-Term Disability Insurances: We want to ensure that our employees are protected in case of unexpected circumstances, and provide short-term & long-term disability insurances, entirely employer paid., • Tuition reimbursement: We believe in continuous learning and development and offer tuition reimbursement to support our employees' educational goals. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.