Trabajos aerospace en BasingstokeCrear alertas

Honeywell Aerospace in Basingstoke is seeking an Intern – External Communications Specialist for a 12-month industrial placement. You will help tell our story to external stakeholders and the media, creating content and providing editorial support while working with marketing, internal and social

Neupulse is at a turning point. Our wearable neurostimulation device is launching commercially — and this is the moment a small, fast-moving team turns a promising product into one that reaches people at scale. We're looking for an electronics engineer who wants to play a key part in that. Someone with broad interests and a bias for getting stuck in — happy to move between design, manufacturing and product support, and motivated by work that makes a real difference. The role This is a broad, hands-on role in a growing startup, where what you work on flexes with what the product needs. Some of it is design; a lot of it is making the device manufacturable, getting it built reliably at volume, and keeping it performing once it's out in the world. Our devices are built with a contract manufacturing partner, so you'll work hand in hand with them and our suppliers across the whole journey — from production readiness through to real-world performance. You’ll: • Get involved in electronics design and improvement — contributing to the product and the changes that make it smaller, better and cheaper to build, • Own the journey into production: New Product Introduction (NPI), Design for Manufacturing, and the test systems that prove every unit (fixtures, jigs, LabVIEW/Python), • Keep the product healthy after launch — root-cause analysis on field and production issues, and continuous improvement in yield, quality and reliability, • Own engineering change: design updates, component substitutions and obsolescence management that keep products buildable for the long haul, • Work shoulder to shoulder with our contract manufacturer and suppliers, keeping everything controlled, traceable and compliant with our QMS and medical device regulations, • A few years' hands-on electronics experience across some mix of design, manufacturing and product support — breadth matters more here than a narrow specialism, • A real knack for root-cause analysis and structured problem-solving, • Experience with low-power Bluetooth wearables, • A solid grasp of DfM, engineering change and manufacturing readiness through to production ramp, • PCB design fluency (Altium a plus), and ideally some automated test experience (integrating instrumentation with LabVIEW, Python or similar), • Time in a regulated industry (medical device, aerospace or automotive), ideally with IEC 60601-1 / 60601-1-2 familiarity, • Audit-ready documentation habits, and ideally some Lean or Six Sigma behind you Why it matters This is a rare chance to have real impact on a product — and on a company — right at the point it starts to scale. Every improvement you make ends up on someone's body, helping them through their day. In a small team, the work you do is visible, it ships, and it counts. Location Hybrid role based in Basingstoke, with regular on-site collaboration expected. You'll need a full, unrestricted right to work in the UK. About Neupulse Neupulse is developing innovative neurotechnology designed to improve wellbeing and long-term health outcomes through non-invasive stimulation technology, connected applications, and data-driven insight. The company's work has particular relevance for individuals living with Tourette's, where the team is committed to building technology that can make a meaningful and measurable impact on everyday life. Our mission is to build accessible, evidence-led technology that can positively impact people at scale. #J-18808-Ljbffr

Graduate Manufacturing Engineer The Company Looking to start your engineering career in a role where you can see products move from concept through to manufacture? We're working with a specialist composites manufacturer with over 25 years of experience delivering advanced composite solutions to sectors including motorsport, aerospace and advanced engineering. As a Graduate Manufacturing Engineer, you'll join a growing business and gain hands-on experience supporting production, manufacturing processes and continuous improvement activities. This is an excellent opportunity for a graduate who wants to develop practical engineering skills within a fast-paced manufacturing environment. Role and Responsibilities As a Graduate Manufacturing Engineer, your key responsibilities will include: Supporting composite manufacturing processes and day-to-day production activities Assisting with investigations into manufacturing issues and implementing corrective actions Developing and updating work instructions, process documentation and manufacturing records Designing and modifying jigs, fixtures, trim tools and manufacturing aids using CAD software Working closely with production teams to improve quality, efficiency, repeatability and workflow This Graduate Manufacturing Engineer role offers broad exposure to manufacturing engineering, process improvement, tooling design and production support. Key Requirements To be considered for this Graduate Manufacturing Engineer role, you will need: A degree in Mechanical Engineering, Manufacturing Engineering, Motorsport Engineering, Automotive Engineering or Aerospace Engineering An interest in manufacturing processes and continuous improvement CAD experience gained through university projects or placements Placement, project or industry experience within manufacturing would be advantageous. What They Can Offer You As the new Graduate Manufacturing Engineer, you can expect: Competitive salary dependent on experience 25 days holiday plus bank holidays 3% employer pension contribution Training and professional development support Exposure to advanced composite manufacturing processes A broad engineering role with real career development opportunities This Graduate Manufacturing Engineer position is ideal for someone looking to build a long-term career in manufacturing engineering within a specialist composites business. What Next? If you like the sound of this Graduate Manufacturing Engineer opportunity, simply click apply now. Need more information? Please contact Tom Schwartz for a confidential conversation. We thank you for your application in advance. Due to the volume of applications we receive, unfortunately, we are not able to respond to every application personally; therefore, if you have not heard back from us within 5 working days, please assume your application has been unsuccessful. To see our other available vacancies, please visit our website. INDENG

I am working with a great mechanical engineering client based in Basingstoke to recruit a quality inspector to join their team on a day shift. You will be familiar with GD&T and competent with a variety of metrology equipment ranging from micrometers to CMMs. The successful quality inspector will be able to read engineering drawings and measure to tight tolerances, ideally having worked in a highly regulated environment such as aerospace. You will be measuring parts created internally, by 3rd parties and on NPD. The inspector will fill in inspection reports so attention to detail is an absolute must. The Role Measuring with a variety of metrology equipment Experience with a CMM Familiar with GD&T Experience working in a machine shop environment Worked in a highly regulated environment Able to read engineering drawings This role is a Monday to Friday position with a slightly earlier finish on Fridays. If you are an experienced quality inspector from a machining background please apply now to find out more about this temporary position GDPR: In line with the GDPR legislations by applying to this vacancy you are agreeing that Fortis Recruitment Solutions can hold/store your data and contact you in regards to this vacancy, or any other suitable vacancies that arise. If you have any concerns/questions in regards to your data and how it is used/stored please refer to our privacy policy page on our website – Fortis Recruitment Solutions Limited. You also have the right to remove your data/cv we hold by visiting our website. (Fortis Recruitment Solutions Limited)

Graduate Quality Engineer The Company Looking to begin your engineering career in a role focused on quality, problem solving and continuous improvement? We're working with a specialist composites manufacturer with more than 25 years of experience supplying advanced composite solutions into sectors including motorsport, aerospace and advanced engineering. As a Graduate Quality Engineer, you'll gain exposure to quality systems, manufacturing processes and root cause investigations while working within a growing and highly skilled team. This is an excellent opportunity for a graduate looking to develop a career in quality engineering within a manufacturing environment. Role and Responsibilities As a Graduate Quality Engineer, your key responsibilities will include: Supporting inspections, quality checks and manufacturing documentation activities Investigating non-conformances and assisting with root cause analysis and corrective actions Preparing quality records, certificates of conformance and customer documentation Supporting the maintenance of engineering, quality and production records Working with production teams to improve quality standards, process compliance and operational performance This Graduate Quality Engineer role offers excellent exposure to quality engineering, manufacturing processes and continuous improvement activities. Key Requirements To be considered for this Graduate Quality Engineer role, you will need: A degree in Mechanical Engineering, Aerospace Engineering, Automotive Engineering, Manufacturing Engineering or a related discipline An interest in quality engineering, manufacturing and continuous improvement Knowledge of quality systems, inspections or root cause analysis gained through projects, placements or university studies would be advantageous. What They Can Offer You As the new Graduate Quality Engineer, you can expect: Competitive salary dependent on experience 25 days holiday plus bank holidays 3% employer pension contribution Training and professional development support Exposure to quality systems and advanced composite manufacturing A varied role with genuine long-term career development opportunities This Graduate Quality Engineer role is ideal for someone looking to develop a career in quality engineering while gaining experience within a specialist composites manufacturing business. What Next? If you like the sound of this Graduate Quality Engineer opportunity, simply click apply now. Need more information? Please contact Tom Schwartz for a confidential conversation. We thank you for your application in advance. Due to the volume of applications we receive, unfortunately, we are not able to respond to every application personally; therefore, if you have not heard back from us within 5 working days, please assume your application has been unsuccessful. To see our other available vacancies, please visit our website. INDENG

Trainee Electro-Mechanical Technician Hours: 8:00am – 4:00pm, Monday–Friday (37.5 hours per week) Overtime: Daily at 1.5x basic rate Duration: Permanent Syntech Recruitment are excited to be supporting an aviation overhaul and repair business based in Alton, who are looking to expand their team with a Trainee Electro-Mechanical Technician. This is an excellent opportunity for someone with 1-2+ years of hands-on engineering or technical experience who is looking to develop a long-term career within the aerospace industry. You'll receive full training on the company's products and repair processes while building on the skills you've already gained in industry. What's in it for you? £29,000 starting salary Full training within a specialist aerospace environment Daily overtime paid at 1.5x basic rate 25 days holiday + bank holidays Monthly performance bonus Clear progression into a fully qualified Electro-Mechanical Technician What you'll be doing: Learning to diagnose and repair electro-mechanical and electronic equipment Reading and interpreting schematic drawings and circuit diagrams Carrying out soldering, testing and refurbishment of components Using multimeters, oscilloscopes and other workshop equipment under the guidance of experienced technicians Completing work to CAA, EASA and FAA Part 145 standards Updating work records using Microsoft Office and the company's MRP system Ensuring work cards and job documentation are completed accurately What we're looking for: 1-2+ years of experience in an engineering, manufacturing, maintenance or technical repair environment Some experience of electronics, electro-mechanical assembly, repair or fault finding Ability to read engineering drawings or electrical schematics (or willingness to develop this skill) Experience with soldering would be advantageous Good practical skills and a methodical approach to problem solving * Computer literate with basic Microsoft Office skills

Manufacturing Engineer The Company Looking for a Manufacturing Engineer role where you can make a real impact on processes, quality and production performance? We're working with a specialist composites manufacturer with over 25 years of experience delivering high-quality composite solutions across sectors including motorsport, aerospace and advanced engineering. As a Manufacturing Engineer, you'll join a growing business where you'll play a key role in improving manufacturing processes, supporting production and helping to shape the future of the operation. This Manufacturing Engineer role offers a broad remit, combining manufacturing engineering, process improvement and quality responsibilities within a highly skilled and collaborative team. Role and Responsibilities As a Manufacturing Engineer, your key responsibilities will include: Providing day-to-day manufacturing engineering support across composite production activities Developing and improving work instructions, manufacturing processes and production documentation Designing or modifying jigs, fixtures, trim tools and manufacturing aids using CAD software Working closely with production teams to improve quality, repeatability, efficiency and manufacturing performance Investigating manufacturing issues, identifying root causes and implementing corrective actions This Manufacturing Engineer position is highly hands-on and will see you working closely with production staff, suppliers and customers to support successful project delivery while driving continuous improvement across the business. Key Requirements: To be considered for this Manufacturing Engineer role, you will need: Experience within composites manufacturing, manufacturing engineering or a similar production environment Experience supporting manufacturing processes and resolving production or process-related issues Experience carrying out root cause investigations and implementing corrective actions CAD experience for tooling, fixtures, jigs or manufacturing aids What They Can Offer You As the new Manufacturing Engineer, you can expect: Competitive salary dependent on experience 25 days holiday plus bank holidays 3% employer pension contribution Training and professional development support The opportunity to influence manufacturing and quality processes A broad and influential role within a growing composites manufacturing business This Manufacturing Engineer role is ideal for someone who enjoys solving manufacturing challenges, improving production processes and working closely with shopfloor teams to deliver high-quality products. What Next? If you like the sound of this Manufacturing Engineer opportunity, simply click apply now. Need more information? Please contact Tom Schwartz for a confidential conversation. We thank you for your application in advance. Due to the volume of applications we receive, unfortunately, we are not able to respond to every application personally; therefore, if you have not heard back from us within 5 working days, please assume your application has been unsuccessful. To see our other available vacancies, please visit our website. INDENG

TechPoint Golledge is part of the TechPoint Group, a UK-based electronics technology company specialising in advanced design, manufacturing, and supply-chain solutions for global customers across industrial, aerospace, medical, and communications markets. The group combines engineering expertise, world-class manufacturing capability, and resilient global supply chains to support customers from concept through to full-scale production. TechPoint Golledge is a highly respected specialist in frequency control and timing devices, with decades of engineering heritage and a strong global reputation. Golledge designs and supplies precision timing products including crystals, oscillators, TCXOs, VCXOs and OCXOs used in applications where accuracy, stability and reliability are critical, supporting customers worldwide across telecommunications, aerospace, industrial electronics and advanced technology sectors. The Product Line Coordinator ensures that strategy is translated into clear operational actions, accurate systems data, and tangible deliverables across the business. This role acts as the execution engine for the product line, ensuring product information, lifecycle activities, pricing, documentation and system data are implemented accurately across internal systems and external platforms. The position requires strong organisation, analytical capability, and attention to detail, working closely with sales, operations, engineering and quality teams to ensure product strategy is consistently executed. Key Responsibilities Product Strategy Execution: • Translate Product Line Manager strategy into operational actions and deliverables., • Coordinate implementation of product line decisions across systems and teams., • Ensure new initiatives, pricing strategies and portfolio updates are correctly implemented. Product Data & System Management: • Maintain accurate product master data within the WinMan ERP system., • Create and manage internal product codes and product structures., • Ensure alignment between ERP, internal documentation, and website product information., • Maintain product specifications, datasheets, and associated documentation. Product Lifecycle Coordination: • Maintain lifecycle status of products (Active, Preferred, NRND, Obsolete)., • Coordinate End-of-Life (EOL) and Last Time Buy (LTB) processes., • Support identification of replacement or alternative products., • Work with operations and supply chain to monitor aging and obsolete inventory. Product Change Management: • Coordinate Engineering Change Notices (ECN) and Product Change Notifications (PCN)., • Ensure product changes are documented, communicated and implemented correctly., • Maintain product change history and documentation records. New Product Introduction (NPI): • Coordinate operational aspects of new product introductions., • Ensure new products are fully established within ERP systems and documentation., • Support launch readiness across sales, marketing and operations. Pricing & Distribution Support: • Maintain the master product price list., • Implement pricing updates across internal systems and external channels., • Support analysis of distribution performance and stocking strategies. Key Skills & Competencies • Strong organisational and coordination capability, • Excellent attention to detail and data accuracy, • ERP system experience (WinMan desirable), • Analytical capability with product and commercial data, • Ability to translate strategy into operational execution, • Strong cross-functional communication skills Experience • Experience in electronics, technology, manufacturing, or distribution environments, • Exposure to product lifecycle management, • Familiarity with product documentation and change control processes, • Experience working with ERP systems and product data management #J-18808-Ljbffr

Technical Sales Specialist High performance Coatings Remote working with UK & International Travel Our client is a market leader in high-performance aerospace, transport and industrial coatings. Were searching for a commercially driven, technically confident Technical Sales Specialist to accelerate growth, develop partnerships and help to shape future product innovation. This is a high-impact role f... JBRN1_UKTJ

Job Title: Intern – External Communications Specialist. As an External Communications Intern at Honeywell Aerospace, you will help to tell our story to our external stakeholders and the media. You will play a key role in content creation and editorial support, while collaborating with wider market

Obsolescence Manager Homebased with occasional travel to Allan Webb Ltd and client offices A bit about us At Allan Webb Ltd, we are a leading engineering consultancy with over 60 years of experience delivering asset optimisation services to clients across the defence, government, energy, pharmaceutical and aerospace sectors, both in the UK and internationally. We're committed to conducting all our act... JBRN1_UKTJ

I am working with a great mechanical engineering client based in Basingstoke to recruit a quality inspector to join their team on a day shift. You will be familiar with GD&T and competent with a variety of metrology equipment ranging from micrometers to CMMs. The successful quality inspector will be able to read engineering drawings and measure to tight tolerances, ideally having worked in a highly regulated environment such as aerospace. You will be measuring parts created internally, by 3rd parties and on NPD. The inspector will fill in inspection reports so attention to detail is an absolute must. The Role • Measuring with a variety of metrology equipment, • Experience with a CMM, • Familiar with GD&T, • Experience working in a machine shop environment, • Worked in a highly regulated environment, • Able to read engineering drawings This role is a Monday to Friday position with a slightly earlier finish on Fridays. If you are an experienced quality inspector from a machining background please apply now to find out more about this temporary position GDPR: In line with the GDPR legislations by applying to this vacancy you are agreeing that Fortis Recruitment Solutions can hold/store your data and contact you in regards to this vacancy, or any other suitable vacancies that arise. If you have any concerns/questions in regards to your data and how it is used/stored please refer to our privacy policy page on our website – Fortis Recruitment Solutions Limited. You also have the right to remove your data/cv we hold by visiting our website. (Fortis Recruitment Solutions Limited)

Our client is currently looking for a Machining & Manufacturing Skills Instructor to join them on a permanent basis Working within the Machine Shop Department, you will deliver high-quality theoretical and practical instruction in machining and workshop engineering disciplines to military and civilian trainees. This role offers the opportunity to share your technical expertise, contribute to the development of future engineering talent, and support the modernisation of Royal Navy training through innovative and collaborative learning solutions. Role: Machining & Manufacturing Skills Instructor Location: Portsmouth Hours: Full Time - Monday to Friday 09:00-17:30 -37.5 hours per week Salary: £40,000 - £42,000 Due to the nature of this role, you must be eligible for UK Security Clearance at SC level. Responsibilities: Deliver theoretical and practical mechanical engineering training in fitting, turning, milling and grinding to military and civilian trainees in line with Defence and Foundation Degree standards. Prepare, develop and maintain course materials, assessments and training documentation to ensure high-quality learning outcomes. Assess trainee performance through tests, examinations and practical evaluations, providing feedback and support to promote successful completion. Provide technical subject matter expertise and maintain training equipment and aids, liaising with external stakeholders and military units to support operational requirements. Essential Skills/Experience/Qualifications Candidates will have served a recognised apprenticeship or a relevant alternative period of training in Fitting and Turning processes to the appropriate ONC, City and Guilds (part III), BTEC or an equivalent level qualification, plus have recent experience within the appropriate workshop skills. Applicants who have completed a full Services Engineering Apprenticeship plus recent practical experience in that trade or specialisation will be deemed to meet the necessary requirements. Candidates should have experience in all aspects of fitting, turning, milling and grinding as well as being to interpret engineering drawings in accordance with BS8888. Candidates should have a minimum of five years post Apprenticeship experience in a relevant working environment Desirable Skills/Experience/Qualifications Previous experience in a training/instructional role would be beneficial but training in Defence instructional techniques will be provided for the successful applicant without prior experience. Previous in Computer Aided Design would be beneficial This role is offered on a term time basis working 45 weeks per year, with non-working weeks taken 2 weeks at Christmas and Easter and 3 weeks in August. The salary will therefore be pro rata'd and calculated to include contractual annual leave entitlement and bank holidays. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

People and Culture Director - Confidential, High-Growth Engineering and Manufacturing Business People and Culture Director | Hampshire (On site) | £80,000 to £90,000, flexed to £95,000 for the right person, plus bonus and benefits Build the strategic people function this business has never had Some HR leaders maintain a strategy. This role is for someone who wants to build one, from the boardroom to the shop floor, in a business that is growing fast enough to need you and stable enough to give you the runway to do it properly. The Organisation Our client is a well-established, privately owned, high-growth engineering and manufacturing business in Hampshire, part of a wider investment-backed group. It has grown its workforce by more than a third in the last three years, invested heavily in advanced manufacturing capability, and holds a substantial, guaranteed order book with genuine ambition to scale considerably further over the next twelve months. What it has never had is a strategic people voice at the top table. That is the opportunity in front of you. The Role You will sit on the senior leadership team from day one, as a genuine peer to the site Managing Director and General Manager, not an adviser on the sidelines. You will own organisational design and workforce planning tied directly to a live growth plan, take full ownership of the reward and pay framework including benchmarking and the annual pay review, build succession planning and leadership development where little currently exists, and be trusted to coach, mentor and build the confidence of senior leaders as the business scales. You will be commercially fluent enough to own a budget, interrogate the people cost base, and advise the leadership team on the workforce implications of commercial decisions as naturally as you advise on policy. This is a hands-on, visible, every-day-on-site role. You will be as comfortable interrogating engagement, turnover and absence data as you are walking the floor, coaching a first-line manager through a difficult conversation, or leading a boardroom discussion on succession. You will lead transformation and cultural change deliberately, not accidentally, in a business that is genuinely ready for it and has the appetite at the very top to back you. The Ideal Profile The person we want is confident without being abrasive, diplomatic without being passive, and collaborative without losing the ability to hold a difficult line when it matters. You will be commercially astute, analytically minded, and comfortable being the person in the room who brings the evidence rather than the opinion. You will have built genuine influence with senior operational leaders from a standing start, ideally in a private equity or investment-backed business going through growth or change, and you will know what it feels like to be the only strategic HR voice in a room full of engineers or technical specialists, and to earn their respect anyway. This will suit you if you are currently the most senior HR or people leader in a high-growth SME and are ready for your next challenge, or if you currently lead people strategy for an autonomous division or business unit within a larger corporate group, genuinely close to the operational leadership rather than sitting centrally within a large HR function. Either way, you will already be used to being hands-on because the business needs you to be, not because no one else is available. To be direct about what will not work: this is not the right move for someone whose experience has been built entirely inside a large, layered corporate HR function, who has always had a team of specialists to lean on, or who is looking for a remote or largely hybrid role. This role is on site, visible, and hands-on by design, and it will suit someone who finds that exciting rather than restrictive. You will be CIPD Level 7 qualified, Chartered MCIPD or Chartered Fellow, or able to demonstrate clearly equivalent standing through track record. Experience in electronics, precision engineering, aerospace, defence or a similarly complex, regulated manufacturing environment would be a genuine advantage, though candidates from other high-reliability or technically complex sectors are very welcome. What matters far more than sector pedigree is your ability to build trust fast, operate with real gravitas, and combine strategic thinking with a genuine willingness to be in the business every day. The Package The package includes a base salary of £80,000 to £90,000, flexed to circa £95,000 for an outstanding candidate, a discretionary profit-share bonus scheme tied to business performance, pension and further benefits to be confirmed. This search is being run on a strictly confidential basis. If this sounds like the challenge you have been waiting for, please apply with your CV quoting reference LX (phone number removed)

Senior AI-Assisted Software Engineer Closing date: 8th October 2026 Location: RG7 4PR , located between Reading and Basingstoke, with free onsite parking. Package: £47,270 - £82,000 p.a (depending on your suitability, qualifications, and level of experience) Working pattern: AWE operates a 9-day working fortnight, with every other Friday as a non-working day. For this role, employees are required to work mostly onsite. We support flexible working arrangements where possible, including part-time and varied working hours, while maintaining an onsite presence. Please let us know if you would like us to consider an alternative working pattern as part of your application. Ready to play your part? At AWE, it's not just a job, it's far more than that. Our shared purpose is to help keep the nation safe. Could this role be the opportunity for you to play your part? As a Senior AI-Assisted Software Engineer, you will take technical ownership of delivering secure, high-quality software solutions using advanced AI-enabled development techniques. Working within AWE's AI Capability Development team, you'll translate business requirements into robust applications, accelerate coding and testing through AI tools, and shape solution designs alongside the AI Platform Specialist and other engineers. By combining strong engineering fundamentals with modern AI-driven practices, you'll help AWE deliver new capabilities at pace while supporting the AI Factory mission and mentoring junior developers in AI-assisted development. Key Accountabilities Accountable for delivering robust software solutions that meet requirements and user needs, from design through release. Ensures projects are completed on schedule and to a high standard, using AI-assisted tools to speed up delivery without sacrificing quality. Accountable for the technical soundness and quality of software outputs. This means enforcing best practices in coding, testing, and documentation, and embedding automated quality checks (e.g. code analysis, security scanning, test coverage) in pipelines. Ensures delivered software is secure, scalable, and aligned with AWE's architecture and compliance standards. Help improve AWE's development capability by piloting and integrating new AI-assisted engineering tools and methodologies. Working with the team and the AI Capability Development lead, keep the team at the forefront of software engineering trends - trialling new code-generation tools, testing frameworks, or coding patterns - to increase productivity and future-proof AWE's internal engineering. Act as a mentor and technical coach to junior developers, guiding them in code craftsmanship, problem solving, and effective use of AI development tools. Accountable for raising the team's skill level and confidence with AI-augmented workflows, fostering continuous learning and improvement. Work closely with cross-functional stakeholders (AI Adoption teams, data engineers, and IT infrastructure) to ensure software is well integrated into the broader AI ecosystem and existing systems. Liaise with these groups to align on requirements, ensure compatibility with enterprise architecture, and guarantee smooth deployment and handover into operational use. Ensure all development activities and outputs align with AWE's safety, security, and Responsible AI guidelines. This includes upholding data protection and ethical AI use in any code or models and swiftly addressing risk or compliance issues. Foster a development environment where governance is an enabler, baked into everyday practices (e.g. approved libraries, documenting model usage). Drive a results-oriented approach, ensuring delivered software demonstrably contributes to efficiency, automation, or other mission goals. Accountable for meeting or exceeding performance benchmarks - e.g. improvements in development cycle times, system performance, or user satisfaction - through effective use of AI-enabled methods. Who are we looking for? We do need you to have the following: Bachelor's degree (or equivalent experience) in Computer Science, Software Engineering, or a closely related field. An equivalent combination of education and substantial professional software development experience will be considered. Proven experience in software engineering, typically in the range of 3-5+ years. Track record of using modern development practices and tools Strong software development skills Whilst not to be considered a tick list, we'd like you to have experience in some of the following: Experience acting in a technical lead or senior developer role on a project or product team. Industry context experience in a highly regulated or secure sector (defence, aerospace, government, etc.). Cutting-edge AI/ML knowledge. Cloud & architecture certifications: Formal certifications such as Microsoft Azure Developer or AWS Certified Developer, or training in software architecture, indicating a solid grounding in designing scalable, cloud-based solutions. Project management or Agile certifications (Scrum Master, PRINCE2 Agile, etc.), suggesting the ability to blend technical and organizational skills to coordinate complex development efforts. Work hard, be rewarded: We ask a lot and set the bar high because our work truly matters. In return we offer balance, with award winning benefits including: 9-day working fortnight - meaning you get every other Friday off work, in addition to 270 hours of annual leave. Market leading contributory pension scheme (we will pay between 9% and 13% of your pensionable pay depending on your contributions). Family friendly policies: Maternity Leave - 39 Weeks Full Pay and Paternity Leave - 4 Weeks Full Pay. Opportunities for Professional Career Development including funding for annual membership of a relevant professional body. Employee Assistance Programme and Occupational Health Services. Life Assurance (4 x annual salary). Discounts • access to savings on a wide range of everyday spending. Special Leave Policy including paid time off for volunteering, public service (including reserve forces) and caring. #LI-AH1 TPBN1_UKTJ

Autopilot Software Engineer- Permanent - Hampshire (Hybrid) Role summary We're hiring a full-time, permanent Autopilot Engineer based in Hampshire. The role is primarily on-site due to hardware and flight-test activity, with flexible hybrid working available. You'll join an agile engineering team building safety-critical flight control software for an autopilot system, working from early requirements and feasibility through to on-site testing and real-world validation. What you'll be doing Contribute to requirements capture, plus concept and feasibility studies Develop safety-critical flight control software to an exceptional reliability standard Support the test ecosystem end-to-end: automated unit testing through to on-site flight testing Maintain and (as required) fly the autopilot model aircraft test fleet Support issue identification, fault-finding and debugging across software and integrated systems What we're looking for (essential) Professional embedded software engineering experience, including Embedded C/C++ Clear passion for the field, evidenced by personal/university projects alongside commercial experience Strong understanding of mechanics of flight and aerospace control systems, with practical application Ability to develop behavioural / application-level logic (the "what to do", not just the "how to do") Comfortable using Git within an agile team, with solid engineering documentation habits Strong hands-on experience with STM32 MCUs and the wider MCU toolchain (IDEs/compilers/debuggers) Low-level driver knowledge: CAN, SPI, I2C, UART, PWM, ICU (and similar) Enough embedded hardware knowledge to support software integration onto rigs / test hardware Ability to support testing from unit tests to flight testing Flexible mindset-willing to go above and beyond to deliver on-time with real-world quality/performance Nice to have Aviation or RC model aircraft interest/background (including piloting) Experience with open-source autopilot ecosystems such as Betaflight, Ardupilot, PX4, MissionPlanner Location / working pattern Hybrid, but primarily on-site (hardware + flight test requirements) Permanent role

Senior Electronics Engineer - Permanent - Hampshire (hybrid/on-site) A Hampshire-based aerospace business is looking for a Senior Electronics Engineer to lead hands-on design and development of avionics electronics for an unmanned aircraft platform. You'll own designs from first principles through prototype build, qualification, and support into production - working closely with systems, software, mechanical and manufacturing teams. What you'll be doing Design & develop avionics electronics (analog, digital and power) for aerospace hardware Take designs from concept to product: robust, scalable, mass-producible and cost-optimised Support qualification / certification activities to standards such as DO-160 / DO-254 and associated test regimes Work with compliance/regulatory needs (including SORA) and environmental qualification (e.g. IP68 style requirements) Support integration, field trials and flight test activities (UAVs and subsystem prototypes) Partner with manufacturing on production support, troubleshooting and continuous improvement Contribute to R&D workstreams advancing platform capability What they're looking for Degree: 2:1 or above in a STEM discipline Strong practical experience across electronics design, prototyping, and productisation Experience in some/all of: SPICE modelling / simulation Component selection + schematic capture Multi-layer PCB design for high-reliability applications EMC/EMI-aware design techniques Altium Designer (preferred, not essential) Useful / nice-to-have: Embedded C/C++ (ideally STM32 or similar) Python (or scripting) for tooling, test, automation Hands-on skills: soldering, cable assembly, prototype bring-up UAV / flight-test exposure Personal attributes Strong problem-solving, comfortable delivering under pressure Clear communicator with good documentation and stakeholder management Proactive, organised, happy to lead multidisciplinary activity Interest in aviation/autonomy and advanced aerospace tech

Trainee Electro-Mechanical Technician Hours: 8:00am – 4:00pm, Monday–Friday (37.5 hours per week) Overtime: Daily at 1.5x basic rate Duration: Permanent Syntech Recruitment are excited to be supporting an aviation overhaul and repair business based in Alton, who are looking to expand their team with a Trainee Electro-Mechanical Technician. This is an excellent opportunity for someone with 1-2+ years of hands-on engineering or technical experience who is looking to develop a long-term career within the aerospace industry. You'll receive full training on the company's products and repair processes while building on the skills you've already gained in industry. What's in it for you? • £29,000 starting salary, • Full training within a specialist aerospace environment, • Daily overtime paid at 1.5x basic rate, • 25 days holiday + bank holidays, • Monthly performance bonus, • Clear progression into a fully qualified Electro-Mechanical Technician What you'll be doing: • Learning to diagnose and repair electro-mechanical and electronic equipment, • Reading and interpreting schematic drawings and circuit diagrams, • Carrying out soldering, testing and refurbishment of components, • Using multimeters, oscilloscopes and other workshop equipment under the guidance of experienced technicians, • Completing work to CAA, EASA and FAA Part 145 standards, • Updating work records using Microsoft Office and the company's MRP system, • Ensuring work cards and job documentation are completed accurately What we're looking for: • 1-2+ years of experience in an engineering, manufacturing, maintenance or technical repair environment, • Some experience of electronics, electro-mechanical assembly, repair or fault finding, • Ability to read engineering drawings or electrical schematics (or willingness to develop this skill), • Experience with soldering would be advantageous, • Good practical skills and a methodical approach to problem solving, • Computer literate with basic Microsoft Office skills

Electronics CAD Technician / Cable Assembly Draftsman (Permanent) - Autonomous UAV Manufacturer A pioneering UK aerospace business developing and operating large autonomous fixed‑wing UAV platforms for logistics, humanitarian and defence missions is hiring an Electronics CAD Technician / Cable Assembly Draftsman on a permanent basis. This is a documentation-led role focused on producing the controlled electrical and cable/harness drawing packs that enable reliable, repeatable manufacture across a growing fleet and next‑generation programmes. The role Working closely with electrical, mechanical and manufacturing engineers, you'll use SolidWorks Electrical (and where required, 2D/3D support for routing/integration) to create and maintain: Electrical schematics, wiring diagrams, single-line diagrams and interconnection drawings Cable, loom and wire-harness assembly drawings (wire IDs, lengths, routing, shielding, breakouts, connector/termination detail) Connector pinouts, cable schedules, wire/from-to lists and BOMs Manufacturing drawing packs and build/inspect/test/installation documentation CAD libraries for symbols, connectors, cable types and standard components You'll apply drawing standards, naming conventions and revision control, reviewing packs for completeness and manufacturability before release, and supporting build teams by resolving drawing queries and incorporating practical feedback. Key responsibilities Produce and maintain controlled electrical and harness documentation in SolidWorks Electrical Create detailed cable assembly drawings including routing, shielding, strain relief and labelling requirements Maintain accurate schedules (pinouts, cable lists, wire lists, BOMs) and ensure part numbers/revisions are correct Support prototype builds, investigations and engineering change requests (ECR/ECN) Liaise across engineering, purchasing, quality and manufacturing to support the full product lifecycle Maintain configuration-controlled records in document management / PDM systems Essential skills & experience Demonstrable background producing electrical CAD drawings / wiring documentation / cable-harness documentation Competence with SolidWorks Electrical (or comparable electrical CAD tools) Strong grasp of schematics, wiring diagrams, pinouts, cable schedules and BOM structures Practical understanding of cable/harness build: crimps/contacts, connector systems, wire gauge, shielding, sleeving, heat shrink, strain relief and labelling High attention to detail (pin numbering, wire IDs, part numbers, revision control, cross-references) Comfortable working with engineering drawing standards and document-release processes Confident communicator with engineers and production/cable assembly technicians Strong Excel skills (schedules/BOM management) Desirable SolidWorks 3D / SolidWorks Electrical 3D (routed harness design) Experience in regulated sectors (aerospace/defence/automotive/industrial/robotics/medical etc.) Knowledge of relevant standards (e.g., IPC/WHMA-A-620, AS/EN 9100, ISO 9001) Experience with PLM/PDM/ERP or controlled document systems Understanding of continuity/IR testing, inspection requirements, EMC/grounding/bonding/shielding and cable segregation Personal attributes Methodical, accurate, quality-focused Comfortable managing multiple drawing packs and change control Practical mindset-cares about "buildable" documentation Can work independently, escalating technical queries appropriately

We are currently looking for skilled CNC Programmers (both Millers and Turners) for an exciting new project with a client of ours in the Portsmouth Area Applicants must have a proven work history as a precision machinist working within a highly regulated industry such as automotive or aerospace Mazak / Mazatrol knowledge is preferred although other programming languages will be considered We are able to offer positions on days or nights depending on the candidates preference For the right candidate we are able to offer rates of up to £30hr PAYE Due to the nature of the business, applicants must be EU or UK nationals Application by CV only please

Join us and make a difference too!Role: Aerospace AuditorLocation: Home‑based in West England , with frequent travel to client sites across the UKLanguages: Fluent English requiredAbout the roleBSI Aerospace team supports over 1700 clients globally. You know what excellence looks like in your se

Significant experience leading manufacturing or supply chain transformation within the Aerospace & Defence sector, gained within leading defence or aerospace organisation, or top-tier consulting firm. We help leading aerospace and defence manufacturers transform how they design, build and deliver co

Date Posted: 2026-07-29 Country: United Kingdom Location: Leighton Buzzard, Bedfordshire Position Role Type: Onsite Title: Stress Engineer Location: Leighton Buzzard Collins Aerospace, a Raytheon Technologies company, is a global leader in technologically advanced and intelligent solutions for the a

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries.

Job Description Job Description: \n Your Impact \n Are you looking to advance your career and work on technology that will shape the future of defence? Does working on developing the next generation of fast jet technology sound like a challenge that would be of interest? If you have skills in system

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries.

This role forms part of a ground-breaking programme within the Defence sector, focused on designing and delivering a cutting-edge Future Combat Air Programme for the Royal Air Force within an ambitious timeframe.This is an unparalleled chance to significantly contribute to the development of advance

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We are the place where human dreams, plus human endeavour, shap

How You'll Contribute As Senior Engineer Materials & Processes you will be responsible for the following: Support operational and development programs to enable and deliver zero defect projects utilising engineering and problem-solving skills Accountable for delivering robust, manufacturing proc

Leonardo is a global leader in Aerospace, Defence, and Security.

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We are the place where human dreams, plus human endeavour, shap

Leonardo to hire for this role.Leonardo UK operates a grade-based salary framework with broad bands.The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market.Exceptions above the standa

What You'll Bring Skills & Experience Proven track record leading complex capture campaigns within the defence or aerospace sector. Experience within aerostructures, transparencies, advanced manufacturing and defence aerospace technologies is highly desirable. Qualifications Degree in Engineerin

Lead the quality and compliance function for an aerospace manufacturer, driving AS9100 and ISO 9001 standards and managing the inspection team.

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. The opportunity to apply will be offered to all contractors at

Leonardo to hire for this role.Leonardo UK operates a grade-based salary framework with broad bands.The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market.Exceptions above the standa

Leonardo to hire for this role.Salary Range -£75,000 - £82,000.Leonardo UK operates a grade-based salary framework with broad bands.The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external

Leonardo is a global leader in Aerospace, Defence, and Security.

Simulator Maintenance Technician Arden White Aerospace and Aviation Recruitment are currently working with a leading aviation training and flight simulation organisation that is looking to recruit a Simulator Maintenance Technician to join its team in Burgess Hill, West Sussex.

A Risk Manager position is available for a global aerospace, defence and security company.

Lead software development activities for modelling and software, managing a team to deliver projects on time and within budget.Requires strong leadership and commercial awareness.

Salary Range £54,000 - £68,000.Leonardo UK operates a grade-based salary framework with broad bands.The salary range shown reflects the approved grade band for this role, or a narrower hiring range published within that band, and is benchmarked against the external market.Exceptions above the stan

Responsibilities include operating CNC lathes, interpreting drawings, and maintaining quality standards in aerospace, rail, and motorsport sectors.

Chief Engineer needed to provide technical leadership and stewardship for in-service products, ensuring safety, integrity, and supportability throughout their lifecycle.

Seeking an Electrician for a 12-month contract in Rochester, working full-time onsite for a global aerospace and defence organization on complex projects.

Seeking a C-UAS Software Architect to define strategic direction and architectures for leading-edge software systems.Role involves technical leadership, bid support, and contributing to product portfolios.Requires extensive experience in complex software systems and defense industry background.

As the Project Planner, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing.