Trabajos cutting en NottinghamCrear alertas

JOB LOCATION: This role is based in Nottingham, UK. The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations – they’re the ones keeping vital machinery running at all times. As an RME Technician, you’ll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities • Proactive and preventative maintenance tasks on a wide range of site equipment, • Carry out reactive repairs and fault diagnosis in a live distribution warehouse, • Use the latest tools to maximise equipment effectiveness, • Uphold all health and safety policies and practices, • Support the development and progression of on-site apprentices, • Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You’ll carry out a range of planned preventative maintenance to our sites’ equipment to make sure it’s working safely. As an RME Technician, you’ll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You’ll also make suggestions for long-term improvements. Working alongside senior colleagues, you’ll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You’ll work on a range of shifts to make sure our sites are supported around the clock – allowing Amazon to deliver at the speed we’re known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology – some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon’s technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon’s crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. • High school or equivalent diploma, • high school diploma or equivalent, • NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics, • 4 years UK certified apprenticeship, • NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship, • SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship, • Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays, • Work flexible schedules including weekends, nights, and holidays, • NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics, or 4 years UK certified apprenticeship, • Experience in engineering, • Experience in electrical or mechanical engineering, or experience in project management, • Experience in English-language communication skills, both written and verbal, • Please be prepared to provide proof of qualifications obtained as part of Amazon’s Terms of Employment., • Associate's degree in Mechnical or Electrical, • Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards, • Experience with robotic operation and maintenance, • Experience with deployment and usage of monitoring systems, • Experience in production or post production processes and facilities Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Job Description: 📍 Melton Mowbray 💷 £39,300- £44,300 DOE 🎁 + £2,500 Welcome bonus, Performance Bonus & Exceptional Benefits 🕗 Hours- 37.5 per week: Mon-Fri 7am-3pm 🌟 Why Join Us? At Melton, we're at the forefront of innovation in high-speed food processing, and we're searching for a talented Reliability Electrical & Controls Technician to join our team. This isn't just another job - it's your chance to make an impact, grow your expertise, and work with cutting-edge technology in a fast-paced, dynamic environment. Cutting-Edge Tech: Work with advanced systems like ABB/Kuka robotics, Allen Bradley PLCs, and predictive maintenance tools. Supportive Culture: Be part of a team that values innovation, continuous improvement, and collaboration. 💼 The Role Reduce technical downtime by driving the effective implementation of preventative maintenance strategies and continuous improvement initiatives. The role holder is responsible for ensuring full compliance with legislative and corporate requirements, while leading the identification, planning, and delivery of improvement activities within their area of ownership. ⭐ What's in it for you? • Welcome bonus paid in your first week's salary, • Hot food restaurant on site, • Career growth opportunities with structured development & Mars University, • Private healthcare + equal parental leave, • Generous pension (up to 9% contribution), • Life assurance (4x salary), • EV salary sacrifice scheme, • Gym membership & wellbeing support, • Annual leave starting at 24 days, rising to 32 with service, • Free parking on site ✅ What We're Looking For • Proven electrical and control systems expertise within an FMCG environment., • Competent in risk assessment, change control procedures, and continuous improvement practices., • Experienced in leading Root Cause Analysis (RCA) and fault-finding investigations to resolve technical issues., • Strong working knowledge of Rockwell Automation and Schneider Electric control systems and software., • Proficient in Microsoft Excel, Microsoft Project, PI ProcessBook, and SAP Planned Maintenance systems., • Qualified to minimum GCSE (or equivalent) in English and Maths, with C&G 2382-18 (18th Edition); 2391 Inspection & Testing desirable. 🔧 Key Responsibilities • Ensure technical compliance and drive continuous improvement within the area of ownership., • Deliver planned maintenance tasks on time, within budget, and to the required quality standards., • Act as a key technical contributor within the factory ownership team., • Plan and execute small-scale proactive maintenance projects, including parts, labour, outage planning, communication, and delivery., • Lead technical issue resolution and drive clear cross-shift communication of plans within the area of ownership., • Maintain accurate records in SAP, represent the area in weekly forums, escalate issues appropriately, and support planning and technical teams as priorities require, including minor PLC modifications. 🌍 What You Can Expect from Mars • Work alongside 130,000+ Associates worldwide guided by our Five Principles, • Be part of a purpose-driven company shaping "the world we want tomorrow", • Access world-class training & development from day one, • Join a company with an industry-leading salary and benefits package

Job Description: 📍 Melton Mowbray 💷 £39,300- £44,300 DOE 🎁 + £2,500 Welcome Bonus, Performance Bonus & Exceptional Benefits 🕗 Hours- 37.5 per week: Mon-Fri 7am-3pm 🌟 Why Join Us? At Melton, we're at the forefront of innovation in high-speed food processing, and we're searching for a talented Reliability Technician to join our team. This isn't just another job - it's your chance to make an impact, grow your expertise, and work with cutting-edge technology in a fast-paced, dynamic environment. Cutting-Edge Tech: Work with advanced systems like ABB/Kuka robotics, Allen Bradley PLCs, and predictive maintenance tools. Supportive Culture: Be part of a team that values innovation, continuous improvement, and collaboration. 💼 The Role Drive a reduction in technical downtime impacting TRS through the successful implementation of site-wide continuous improvement initiatives and targeted projects aimed at reducing asset criticality. The role will lead teams in the effective identification, planning, and delivery of improvement activities to achieve sustainable, site-wide performance enhancements. ⭐ What's in it for you? • Welcome bonus paid in your first week's salary, • Hot food restaurant on site, • Career growth opportunities with structured development & Mars University, • Private healthcare + equal parental leave, • Generous pension (up to 9% contribution), • Life assurance (4x salary), • EV salary sacrifice scheme, • Gym membership & wellbeing support, • Annual leave starting at 24 days, rising to 32 with service, • Free parking on site ✅ What We're Looking For • Proven electrical and control systems expertise within an FMCG environment., • Competent in risk assessment, change control procedures, and continuous improvement practices., • Experienced in leading Root Cause Analysis (RCA) and fault-finding investigations to resolve technical issues., • Strong working knowledge of Rockwell Automation and Schneider Electric control systems and software., • Proficient in Microsoft Excel, Microsoft Project, PI ProcessBook, and SAP Planned Maintenance systems., • Qualified to minimum GCSE (or equivalent) in English and Maths, with C&G 2382-18 (18th Edition); 2391 Inspection & Testing desirable. 🔧 Key Responsibilities • Lead and deliver projects to reduce asset criticality and improve site-wide reliability., • Drive technical training, coaching, and knowledge sharing across engineering teams and apprentices., • Lead and support Root Cause Analysis (RCA) and fault-finding activities to improve plant performance., • Act as Electrical & Controls reliability ambassador, ensuring effective capital project handovers and compliance., • Support planning, technical leadership, and operational priorities across engineering teams as required., • Ensure electrical compliance, manage contractor permits, and maintain HV network in line with safety and service standards. 🌍 What You Can Expect from Mars • Work alongside 130,000+ Associates worldwide guided by our Five Principles, • Be part of a purpose-driven company shaping "the world we want tomorrow", • Access world-class training & development from day one, • Join a company with an industry-leading salary and benefits package

CNC Turner x2Location: NottinghamSalary: £17.50 - £18.50 per hour (depending on experience)Hours: 39 hours per weekMonday - Thursday: 7:00am - 4:00pmFriday: 7:00am - 12:30pmAuxo Talent is recruiting on behalf of a well-established precision engineering company in Nottingham for two experienced CNC Turners . This is a fantastic opportunity to join a growing manufacturer renowned for producing high-quality precision components across a range of industries.If you're an experienced CNC Turner with programming, setting and operating experience who takes pride in producing high-quality work, we'd like to hear from you.The RoleAs a CNC Turner, you'll be responsible for programming, setting, and operating CNC turning machines to manufacture precision-engineered components to tight tolerances. Working within a modern machining environment, you'll play a key role in delivering quality products efficiently while supporting continuous improvement across the business.Key ResponsibilitiesProgramme, set, and operate CNC turning machines.Manufacture precision components in line with engineering drawings and customer specifications.Select appropriate tooling, machine settings, and cutting parameters for each job.Carry out first-off, in-process, and final inspections using precision measuring equipment.Read and interpret engineering drawings accurately.Maintain exceptional quality standards and work to tight tolerances.Meet production schedules while ensuring accuracy and efficiency.Carry out routine machine maintenance and maintain a clean, organised work area.Identify opportunities to improve machining processes and productivity.Comply with all Health & Safety procedures and company policies.Work collaboratively with colleagues to support production objectives.About YouTo be successful in this role, you'll have:Previous experience as a CNC Turner within a precision engineering environment.Experience programming, setting, and operating CNC turning machines.The ability to confidently read and interpret engineering drawings.A strong understanding of machining tolerances and quality standards.Experience using precision measuring equipment, including micrometers, verniers, and gauges.Excellent attention to detail and problem-solving skills.The ability to work independently and as part of a skilled manufacturing team.A positive attitude and commitment to producing high-quality components.Desirable ExperienceExperience using Fanuc, Mazatrol, or Siemens control systems.Experience machining a variety of materials, including stainless steel, aluminium, and mild steel.Knowledge of Lean Manufacturing or Continuous Improvement techniques.Experience working within an ISO-accredited manufacturing environment.What's on Offer?£16.50-£18.50 per hour, depending on experience.Permanent, full-time opportunity.Early finish every Friday.Overtime opportunities.A stable and growing precision engineering business.Modern machining environment with ongoing investment in equipment.Supportive team culture with opportunities for training and career progression.If you're looking to join a company that values quality, craftsmanship, and continuous improvement, apply today or contact Auxo Talent for a confidential discussion about this opportunity.TPBN1_UKTJ

This is an excellent opportunity for an experienced Laser Cutting Operator to work for a specialist in precision laser cutting, metal fabrication, and high-quality finishing solutions, delivering accurate, reliable components for a wide range of industrial applications. With a focus on craftsmanship, speed, and consistency, they support customers from prototype through to full production. You will ... ZIPC1_UKTJ

Laser Cutting SupervisorLocation: NottinghamCommutable from: Derby, Long Eaton, Ilkeston, Mansfield, Newark-on-Trent, Hucknall, West BridgfordSalary: £17.00 per hourHours: Monday to Friday, 6:00am - 2:00pmThe OpportunityWe're recruiting for an experienced Laser Cutting Supervisor to join a growing precision engineering manufacturer in Nottingham. This is a hands-on supervisory role where you'll take responsibility for leading the laser cutting department, ensuring production targets are achieved while maintaining the highest standards of quality, safety and efficiency.You'll work closely with production, quality and planning teams, supporting the day-to-day running of the department while developing and motivating your team.What You'll Be DoingSupervising the daily operation of the laser cutting department.Leading, motivating and supporting a team of Laser Operators.Planning workloads to ensure production deadlines are achieved.Setting and operating laser cutting machinery when required.Carrying out first-off inspections and ensuring components meet customer specifications.Monitoring quality throughout production and resolving any manufacturing issues.Reducing downtime by identifying and implementing process improvements.Working alongside Production Planning, Programming, Quality and Operations teams.Training, coaching and developing team members.Conducting probation reviews, return-to-work meetings and day-to-day people management.Ensuring high standards of housekeeping across the department.Promoting a positive health and safety culture.Reporting equipment faults and liaising with the maintenance team.Supporting continuous improvement projects to increase productivity.Assisting with recruitment and onboarding of new employees when required.What We're Looking ForWe're looking for someone who has:Previous supervisory or team leader experience within a laser cutting or sheet metal manufacturing environment.Extensive hands-on experience operating industrial laser cutting machinery.A strong understanding of engineering drawings and manufacturing processes.Knowledge of sheet metal fabrication.Experience managing workloads and achieving production targets.Excellent leadership, communication and organisational skills.A proactive approach with the ability to solve problems and make decisions under pressure.What's on Offer?Permanent, full-time days.Monday to Friday working pattern.Opportunity to lead an established production team.Stable employment within a growing engineering business.Ongoing training and development opportunities.Company pension.On-site parking.ApplyIf you're an experienced Laser Cutting Supervisor or an established Laser Team Leader looking for your next opportunity, we'd like to hear from you. Apply today with your up-to-date CV.TPBN1_UKTJ

Laser Cutting Operator x2 Location: Nottingham Salary: £16.00 - £17.00 per hour (DOE) Shifts: Rotating shifts (6:00am-2:00pm / 2:00pm-10:00pm) Auxo Talent is recruiting on behalf of a well-established manufacturing business for two experienced Laser Cutting Operators to join their production team. This is an excellent opportunity to work with a respected employer that values quality, continuous impro... ZIPC1_UKTJ

Site ManagerThis challenging and exciting opportunity requires an individual with a good technical background and demonstrable experience in taking the responsibility for overseeing engineering-based sites and installations.We are looking for an experienced Site Manager/Supervisor from the mechanical engineering, industrial or fabrication sectors. An engineering trade qualification is essential. The role is working 42 hours per week with some overseas travel required. A full driving licence is also essential.Due to sustained growth, a significant forward order workload and a continued commitment to be at the forefront of the industry, our client is now searching for a talented and motivated Site Manager. The successful candidate will have the day-to-day responsibility for the safe, timely and profitable delivery of a wide variety of sites and installations. This will sometimes include managing site-based teams, and resolving any technical, operational and commercial issues as required.The RoleOversee the activities of the designated site installations and teams, providing guidance, control and structure to the decision-making processes.Ensure the resources available on site are managed to achieve the least cost option to satisfy project objectives.To oversee the installation phase of projects, working closely and liaising with site personnel, customer, suppliers, sub-contractors and other internal departments.Ensure sites and installation activities are managed in a manner that provides budgetary control of resources in order to increase the departments performanceAssist with the preparation of RAMS, lift / crane plans and HSEQ documents, to ensure compliance with current regulations and legislations.Assist in site audits, inspections, surveys, pre-site visits and meetings for installation aspects of all projects on behalf of the companyEnsure all installations are planned and executed in accordance with operating policy, whilst maintaining the professional and progressive image of the company wherever possibleWork under deadline pressures in an efficient, composed and calm mannerHelp to manage suppliers and sub-contractors to improve safety, performance and profitThe PersonPossessing experience in a similar role from any area of the aforementioned sectors, coupled with a recognised engineering trade qualificationPossess first-hand exposure to the supervision of engineering-based site installationsHold experience of a variety of multi disciplined engineering techniquesPossess an understanding of all stages of the site installation process, coupled with the ability to support your team as requiredAble to identify the requirements of assigned sites to produce appropriate delivery plansAble to positively engage with clients, suppliers, contractors, site teams and colleaguesEfficiently manage situations when workload presents conflicting demands on timeMonitor, progress and implement controls to ensure tasks are achievedCommunicate facts to stakeholders (internally or externally) in an effective mannerDeliver efficient and effective customer service at all timesA full UK driving licence and the willingness to travel UK wide and sometimes overseasOur ClientOur client is a market leading design, build, installation and maintenance contractor operating at the cutting edge of engineering excellence driven and supported by a passion for innovation. They have continuously diversified and expanded their expertise, enabling them to deliver a huge range of advanced engineering solutions for the Aerospace, Infrastructure, Manufacturing, Defence, Industrial and Energy sectors, amongst many others. They not only complete projects successfully and to the highest of standards at all times but also add value to their clients by giving them total support from the beginning to the end of each and every contract.An attractive basic salary plus extensive benefits package is on offer to the successful candidate, along with longevity and security of work and forward career progression given that our client possesses a significant contract pipeline for the long-term future and is firmly committed to continued growth over the next 5-10 years.TPBN1_UKTJ

Grounds Maintenance Operatives Location: Gamecock and Whittington Barracks, CV11 6QN Hourly Rate: £12.71 Contract type: Temporary, 6 months Working hours: Monday - Friday, 07:30 to 16:00 About the role \n Grass cutting, strimming, hedge pruning, flower bed maintenance, spraying, and more - join us as a Grounds Maintenance Operative and you'll be doing them all. As part of our team at the Gamecock and ... \n \n \n \n ZIPC1_UKTJ

Software Developer - C# .NET/AWS/NoSQL - Hybrid - Nottingham - £50,000 - £65,000 \n The Role \n An exciting and innovative software house are looking for an ambitious and talented Software Developer to join their growing development team. \n You will be working across a suite of cloud-based enterprise systems used globally, contributing to both enhancing existing applications and driving forward new development from initial concept all the way through to final delivery. You will have access to a wide range of modern tools and technologies, alongside a supportive team of experienced developers to collaborate with. \n This position will give you the opportunity to work on complex, mathematically-driven systems, be involved in greenfield development projects from day one, and gain exposure to industry leading software used across international markets, providing an excellent platform to further progress your Software Development career. \n Requirements: \n\n • Minimum 3 years' experience in C# .NET\n, • Cloud experience (AWS preferred)\n, • NoSQL\n, • Strong Mathematical background (algorithm development/computational math etc)\n\n Desirables: \n\n • Angular 18+\n, • Maths/Physics Degree\n, • RabbitMQ / MassTransit\n, • TDD/DDD\n\n The Company \n The company are a specialist software development house delivering advanced applications for the manufacturing industry. They continue to invest heavily in modernisation and cloud technologies, offering developers the chance to lead the technical direction of the company. \n Collaboration across teams is at the heart of the business, enabling developers to gain insights across the full project lifecycle, from concept research through to client delivery. This close-knit environment encourages skill diversification and provides clear opportunities for long-term career development. \n The salary for this role is between £50,000 - £65,000. This is a hybrid position which offers 3 days WFH a week, plus an excellent benefits package including a competitive pension scheme, life and critical illness cover, salary-sacrifice options, free parking, flexi time plus 25 days holiday (increasing with years of service) plus bank holidays with the option to buy/sell additional days. \n Apply Now \n If you are a passionate Software Developer looking to join a company where you can contribute to cutting-edge global systems and be involved across the full development lifecycle, this is the role for you! \n Interviews can be organised immediately, so apply now and don't miss out. \n Software Developer - C# .NET/AWS/NoSQL - Hybrid - Nottingham - £50,000 - £65,000 \n Oscar Associates (UK) Limited is acting as an Employment Agency in relation to this vacancy. \n To understand more about what we do with your data please review our privacy policy in the privacy section of the Oscar website.

We’re working with a fast-growing team at the early stages of an exciting new project, and they’re looking to bring on a Data Scientist with strong AI exposure to help shape and deliver innovative solutions.The Role You’ll be working on cutting-edge projects involving advanced modelling techniques, contributing to the development of intelligent systems and data-driven decision-making.Key Details\n\n • 12-month initial contract\n, • Outside IR35\n, • Mostly remote working\n, • Flexible, occasional travel to Nottingham\n, • 2-stage interview process (moving quickly)\nWhat We’re Looking For\n\n, • Strong background in Data Science with exposure to AI / Machine Learning\n, • Experience with forecasting and simulation techniques\n, • Proven track record in large-scale simulation modelling\n, • Experience within the utilities sector is a bonus (not essential)\nWhy Apply?\n\n, • Opportunity to work on a brand-new, high-impact project\n, • Join a growing and ambitious team\n, • Competitive day rate (Outside IR35)\n

Do you thrive on turning complex transport challenges into seamless, cost-effective delivery solutions? Can you keep a fast-paced logistics operation moving while maximising fleet utilisation, service performance, and commercial results? Ready to use data, technology, and sharp decision-making to make a real impact across one of the UK's leading transport networks? \n \n Here at GXO, join our team in Nottingham as our Transport and Sub Contraction Planner. You will be responsible for business-critical services including storage, handling and distribution; high volume E-Fulfilment; two-person home delivery; fleet and transport management; and network optimisation for many of the UK's best-known companies. \n \n This is a full time, permanent position, working Monday to Friday rotating between 07:30 – 1730 Contracted hours of 40 hours per week. \n \n Pay, benefits and more: \n \n We’re looking to offer a salary of up to £32,000 per annum and 25 days annual leave (plus bank holidays). Your benefits package includes a company sponsored pension scheme, and access to our benefits platform, including retail discounts! \n \n What you’ll do on a typical day: \n \n\n • Ensures all assets are utilised in line with KPI targets\n, • Ensures that service is delivered through proactive and accurate planning of loads\n, • Drives margin by fully utilizing TMS functionality and then enhancing results through proactively sourcing further backhaul opportunities to maximise fleet utilisation\n, • Ensure service levels are delivered through working collaboratively with the Sub Con operation to maximise the overall service delivery KPI for customers\n, • Maintains a high data accuracy in the TMS for all fleet planning activities, avoiding retrospective administration\n\n \n \n What you need to succeed at GXO: \n \n\n • Industrious and busy individual with an affinity for a time pressurised environment\n, • Excellent Communication skills, both verbal and via systems\n, • Experience of freight forwarding or transport planning operations essential, ideally in a network planning environment\n, • Systems user, comfortable with modern digital systems and the application of data combined with general large fleet operation experience\n\n \n We engineer faster, smarter, leaner supply chains. \n \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement

Nottingham | Full Time | £27,000 - £28,000 | Immediate Start About the Company A leading automation and intralogistics specialist, helping businesses move goods smarter, faster, and more efficiently. In simple terms, they design and deliver intelligent automation solutions that make production, warehousing and supply chains work better. They are involved from the very start, concept and system design, all the way through to installation, software integration and long-term support. The teams work with cutting-edge automation technology and smart software to give customers better visibility, control and performance across their operations. This growing Nottingham based engineering company are seeking an engineer graduate to join their driven team and want someone who shares their passion for the industry.The Role You will gain exposure to a variety of aspects across the business, and you will need to adapt to what project you are working on. This could be meeting with clients or helping design to project specifications. Responsibilities include:\n\n • Working with the Sales team you will use Solidworks and AutoCAD to transform sales layouts into real-life designs.\n, • Perform calculations (e.g., throughput and cycle time) to determine suitable equipment\n, • Analyse client operations and create material flow diagrams to improve efficiency\n, • Liaise with cross-functional teams (R&D, Sales, Project teams) to ensure high-quality delivery\n, • Produce designs that meet cost, schedule, and specification requirements\n, • Contribute to improving efficiency across departments\n, • Run simulations to model and test different scenarios\n, • Develop and present comprehensive project proposals\nAbout You The company is looking for a recent graduate who demonstrates a strong interest in engineering projects and has a proactive, detail-oriented approach to their work. The ideal candidate will hold a degree in an Engineering or a related discipline and will possess excellent organisational and analytical skills. Strong communication and interpersonal abilities are essential, as the role involves regular interaction with a variety of stakeholders. A willingness to learn, take initiative, and adapt to new challenges is highly valued. Proficiency in Microsoft Office is required, and familiarity with project management tools such as MS Project or Smartsheet would be advantageous. An interest in technology, logistics, or industrial automation would further enhance your suitability for the role. An interest in technology, logistics, or industrial automation would further enhance your suitability for the role.Essential Skills \n\n, • Proficient in Solidworks and AutoCAD experience\n, • Strong communication and presentation skills\n, • Microsoft proficient – Excellent in Excel, Power Point\n, • An interest in special purpose, automation or materials handling equipment\n, • Interpersonal Skills\nAdvantageous Skills (Not essential)\n\n, • Robotics experience\n, • Knowledge/Experience in logistics and supply chain\n Our client offers career progression and opportunities to develop your skills, they are looking for someone who is wanting to stay long term to build their career within the business If you think you have the right skill set to thrive in this role, submit an application!

Client: DysonJob Title: StylistLocation: Nottingham, NG1 3QASalary: £13.57 per hourWorking Pattern: 12 hours per week (Saturday & Sunday)Join Dyson as a Stylist - Where Tech Meets StyleLove hair, style, and the latest tech? Step into the spotlight with Dyson and help shape the future of hair care.As a Dyson Stylist, you'll work hands-on with cutting-edge hair technology, creating wow-worthy results and unforgettable customer experiences. You'll represent a globally iconic brand that's all about innovation, performance, and pushing boundaries - all while building your own skills through world-class training and genuine career progression.Join a creative, high-energy team that's passionate about confidence, self-expression, and great hair days. If you're ready to inspire, experiment, and grow with a brand that's changing the beauty game, this is your moment. \n Key ResponsibilitiesWhat You'll Be DoingShowcasing Dyson Innovation \n\n • Demonstrate the features and benefits of Dyson hair care technology.\n, • Provide tailored product recommendations that suit each customer's needs.\n\n Collaborating with the Store Team \n\n • Work closely with colleagues to present the full Dyson product range.\n, • Contribute ideas and energy to enhance the overall in-store experience.\n\n Delivering Premium Customer Service \n\n • Offer an exceptional level of customer care that reflects Dyson's high standards.\n, • Build trusted relationships with customers and support the in-store team throughout the day.\n\n Driving Store Performance \n\n • Support business plans and contribute to achieving store targets.\n, • Confidently share product knowledge to increase engagement and sales.\n\n Build Strong Connections \n\n • Create positive relationships with your in-store colleagues.\n, • Offer support and teamwork throughout every shift.\n\n What You'll BringHair Styling Expertise:A background in hair styling and a passion for delivering excellent customer service.Retail Awareness:Retail experience is an advantage, but your enthusiasm for hair care and Dyson technology is what truly matters.Tech Curiosity:A natural interest in innovative products and the ability to engage customers with your product knowledge.Ambition & Drive:A proactive attitude and the determination to contribute to the success of the store.Excellent Communication:Strong interpersonal skills and a genuine commitment to creating exceptional customer experiences. \n What's in It for You? \n\n • Experience working with a world-leading technology brand.\n, • A collaborative and supportive store environment.\n, • Access to a sales incentive scheme offering up to £400 additional monthly earnings.\n, • Opportunities to build your expertise in retail, hair care, and technology.\n\n Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Opus People Solutions are excited to recruit on behalf of Vertas for a dedicated Grounds Maintenance Operative to join the Facilities Team.\n This is a fantastic opportunity for someone who takes pride in maintaining outdoor spaces and enjoys working as part of a team to deliver high standards across school environments. \n \n Location: Newark (travel between multiple school sites) or NG5 6NZ Hours: Monday to Friday, 07:00 - 15:30Contract: Temporary (with potential to become permanent) \n \n Key Responsibilities \n\n • Maintaining school outdoor areas to a high standard\n, • Grass cutting and general grounds upkeep\n, • Operating equipment such as strimmers and other powered tools\n, • Marking out football pitches and running track lines\n, • Ensuring all areas are tidy, safe, and presentable at all times\n, • Travelling between various school locations across the Newark area\nRequirements\n\n, • A full UK driving licence (essential)\n, • Enhanced DBS check (required due to working in schools)\n, • Previous grounds maintenance or similar experience desirable\n, • Ability to safely operate landscaping equipment and power tools\n, • Strong work ethic and attention to detail\n, • Ability to work independently and as part of a team\n\n \n Are you passionate about cleaning, teamwork, and delivering exceptional service? If you take pride in creating clean, safe, and welcoming environments and enjoy hands-on outdoor work, we'd love to hear from you. \n

Panel Wireman – Nottingham\n Salary: £33,421 – £36,500 per annum Hours: Monday to Thursday, 7.15am – 5.30pm (39 hours, 4-day week) \n My client, part of a global engineering group, is seeking an experienced Switchgear Panel Wireman to join their brand-new, state-of-the-art facility in Nottingham. This role is ideal for a Panel Wireman who enjoys working on complex, high-quality electrical systems and wants to be part of a supportive, close-knit team. \n You’ll be working on cutting-edge switchgear projects that power data centres for some of the world’s largest technology companies, offering long-term stability and excellent career prospects. Why Join This Business?\n\n • \n 4-day working week – enjoy long weekends every week \n • \n 20 days holiday (based on a 4-day week) plus Christmas shutdown \n • \n Overtime paid at 1.5x \n • \n On-site parking & paid lunch breaks \n • \n Health plan, death in service and EAP (after probation) \n • \n Long-term career with a well-established and growing company \n The Role – Panel Wireman\n As a Panel Wireman, you will: \n\n • \n Manufacture and assemble high-quality electrical switchgear systems \n • \n Work from CAD drawings and electrical schematics \n • \n Use tools and machinery safely and efficiently \n • \n Collaborate with the production team to meet build targets \n • \n Maintain 5S standards to ensure a safe, organised workspace \n • \n Follow all health and safety procedures \n About You\n\n • \n Proven experience in electrical wiring, assembly or manufacturing \n • \n Confident using hand tools and power tools \n • \n Strong communication skills and a team-focused approach \n • \n Excellent attention to detail and commitment to quality \n • \n Able to work independently with good time management \n\n If you’re a skilled Panel Wireman looking to progress your career with a forward-thinking business that values its people, my client would love to hear from you. \n Apply today to be considered. \n #INDPP

Join Our Team as an Electrical Engineer based in Nottingham, Nottinghamshire, United KingdomSalary: £38,121 to £38,121 AnnumHours: Full Time, 39 hours a week / 4 day week - Monday -Thursday / Permanent \n Why Work With Us? \n A career at Davenham Switchgear offers far more, including the combination of the stability and resources of being a brand of Legrand, with the close-knit, agile team we’ve built at Davenham. As well as exciting opportunities to work on cutting-edge switchgear which is powering data centres for some of the biggest tech companies in the world. \n We’re proud of the continued success of our Dublin operation over the last 40 years and we are excited to be expanding into the UK at our new state-of-the-art Nottingham site. \n Benefits of joining our team \n\n • 4 day week\n, • 20 days holidays \n, • On site parking\n, • Paid lunch break\n, • Over time at x 1.5\n, • Death in service x 3 salary\n, • Christmas shutdown\n, • On site\n, • Westfield Health & retail discounts after probation\n, • EAP \n\n The Electrical Engineer role: \n In this role, you will be responsible for assembling and manufacturing electrical switchgear systems in line with detailed schematics. You will interpret 3-phase electrical drawings and CAD-generated diagrams with accuracy, ensuring that each component meets our high-quality standards. \n The Electrical Engineer role also involves maintaining and operating a variety of tools and equipment, as well as modifying and repairing automated electronic systems as needed. \n You’ll play a key part in supporting the upkeep of workshop equipment and ensuring overall efficiency. Working closely with your colleagues, you’ll contribute to meeting production targets while strictly adhering to health and safety procedures and helping to maintain a clean, organised, and safe work environment. \n What you’ll need to join us as an Electrical Engineer: \n • 17th / 18th Edition Wiring Regulations certification- JIB/ECS Gold Card- Proven experience in low-voltage switchgear manufacturing- Skilled in using hand and power tools- Ability to read and work from technical and CAD-based drawings- Excellent communication and problem-solving skills- Self-motivated, detail-oriented, and able to work under pressure- Team player with good time management and multitasking ability \n If you’re an experienced Electrical Engineer looking to work with a forward-thinking, people-focused business, we’d love to hear from you. \n Note: We reserve the right to amend this job description in line with business needs. All changes will be communicated accordingly. \n No agencies please.

Operations / Factory Manager \n \n Direct Reports: Production, Warehouse and Operational Teams (up to 30 employees) \n \n About the Company \n \n Our client is an innovative and rapidly growing sustainable packaging manufacturer, producing environmentally friendly packaging solutions using cutting-edge based technology. \n \n This is a unique opportunity for a commercially minded operations leader who is looking to progress into a future Chief Operating Officer (COO) position as the company continues to grow. \n \n The Role \n \n\n • The Factory / Operations Manager will take full responsibility for the day-to-day management of the manufacturing facility (12,000 sq/ft). Ensuring safe, efficient and cost-effective operations while developing a high-performing team.\n, • This role is ideal for an ambitious individual who wants to make a significant impact within a pioneering sustainability-focused business and build a clear pathway towards executive leadership.\n\n \n Key Responsibilities \n \n\n • Lead all factory and operational activities to achieve production, quality and delivery targets.\n, • People person, to manage, motivate and develop a growing team.\n, • Proven experience as a Factory Manager, Operations Manager, Manufacturing Manager or Plant Manager.\n, • Experience leading manufacturing teams of 20–50 employees.\n, • Strong leadership skills with the ability to inspire and develop people.\n, • Track record of improving operational performance and implementing continuous improvement projects.\n\n

\n At MHR, our employees are central to our success and play a key role in helping customers achieve sustainable high performance. With a team of over 900 professionals, we work to make things flow smoothly, whether it's for large organisations or individual employees. As businesses face rapid changes in the world of work, our team is here to help them adapt and thrive. \n By focusing on the core needs of efficiency, productivity, growth, and impact, our employees use their expertise to deliver real solutions through our People and Finance platform. This system, which covers finance, HR, payroll, and learning, helps businesses run more smoothly and make better decisions in real time. \n With over 40 years of experience behind us, MHR’s track record as a high-performance organisation is built on clear goals, a shared vision, and strong communication - all of which we pass on to our customers. \n MHR is more than just a place to work; it’s a platform for empowerment. Joining us means bringing innovation, technology, and teamwork seamlessly removes obstacles, enhances your skills, and allow you to focus on what’s most important to you- work that matters. \n With us, you’ll grow, find your flow , and make a lasting difference in your career, your team, and your impact. \n Are you ready to be at the forefront of cutting‑edge technology and innovation? \n This is your opportunity to grow your career within a fast‑paced, forward‑thinking product organisation. You’ll lead the feature development of our People First SaaS product, directly influencing how businesses around the world manage and empower their people. \n You’ll refine your leadership, strategic thinking, and technical expertise as you drive product vision and execution across multiple teams - turning ideas into impactful solutions that make a difference. Your Team\n You’ll be joining a collaborative, cross‑functional team that includes engineering, design, marketing, and sales professionals who are all passionate about creating meaningful digital experiences. \n Working closely with senior leadership and the Principal Product Manager, your team will set ambitious goals (OKRs), align strategies, and transform insights into innovative, customer‑centric features. Your Impact\n As an experienced product leader, your decisions will shape the success of our People First product suite and directly influence our customers’ experience. \n From defining product vision to leading discovery and prioritisation, you’ll ensure we deliver features that meet real business needs - driving growth and customer satisfaction. Key Responsibilities\n \n • Shape and execute product strategy and roadmap.\n, • Define problems, prioritise solutions, and manage trade‑offs.\n, • Collaborate across teams on design, research, and go‑to‑market plans.\n, • Set measurable goals (OKRs) and track performance.\n, • Stay informed on market trends and customer insights.\n, • Communicate clearly, take ownership, and drive delivery.\n Benefits to support you personally and professionally\n Alongside the opportunity to work with an incredible team and express your individuality, we offer a range of personalised benefits including: \n \n • Access to over 60 internal training courses, professional qualifications, and cross‑departmental mentoring and coaching programs\n, • 24/7 access to a GP through Help at Hand for you and your family, confidential mental health support, and paid sick leave\n, • Ability to purchase or sell additional holiday days beyond 25 days and bank holidays\n, • Enhanced Family leave\n, • My MHRewards offering discounts at over 900 retailers\n, • Monthly employee recognition programme and departmental awards\n, • Referral bonus scheme of up to £2,000\n, • Employee‑led social events such as running clubs, football teams, book clubs, and bake‑offs\n, • On‑site subsidised restaurants offering a variety of fresh meals daily\n, • Opt‑in benefits schemes such as private medical insurance and dental coverage\n \n We value the well‑being, financial stability, and inclusivity of our employees, and strive to provide a supportive working environment. \n At MHR, we’re completely committed to creating a supportive and inclusive workplace where all voices are heard, and everyone feels valued and supported. \n Whatever your background, abilities and experiences, if you’re excited by this role we want to hear from you. If you require assistance for an interview, please let us know and we’ll make sure your needs are met when you arrive. \n If we receive an exceptionally high volume of applications, we reserve the right to close this vacancy earlier than originally advertised. \n #J-18808-Ljbffr

Job Title: Graduate Chemist \n Location: Nottingham \n Remuneration: Competitive \n Start Date: Immediate \n Contract Type: (full-time) \n \n About Us \n Vateris is a pioneering R&D company developing breakthrough technology to capture and permanently mineralise CO₂ in concrete. Our patented additive reduces emissions while improving strength and durability, offering a scalable solution for one of the world’s most polluting industries. \n Having recently scaled up our production process 10x, we are building a pilot plant in Nottingham that will operate using real flue gas. This will inform the design of a 100x larger commercial demonstrator. C4C is backed by major industrial partners (SCG, Goldbeck) and collaborates with leading UK universities. \n \n The Role \n C4C is seeking a motivated Graduate Chemist to support laboratory and R&D activities on a flexible, zero-hours basis. \n This is a hands-on role ideal for someone looking to gain industrial experience in applied chemistry, materials development and plant operation. You will contribute to experimental work, synthesis, and testing, supporting the operation of the pilot plant. \n \n Key Responsibilities \n • Support laboratory experiments, including synthesis and testing of materials \n • Assist with material characterisation (e.g. XRD, SEM, TGA, DSC) \n • Conduct experimental work and contribute to data collection and analysis \n • Maintain accurate laboratory records and documentation \n • Follow all safety and compliance procedures \n • Support general lab operations, troubleshooting, and organisation \n \n Essential Requirements \n • PhD in Chemistry (2:1 or above) \n • Strong understanding of core chemistry principles \n • Basic laboratory experience (synthesis, testing, or materials work) \n • Good analytical and problem-solving skills \n • Strong organisation, attention to detail, and record-keeping \n • Good communication and ability to work in a team \n • Proactive, adaptable, and eager to learn \n \n Desirable Experience \n • MSc or PhD in Chemistry or related field \n • Experience with analytical techniques (XRD, SEM, TGA, DSC) \n • Experience in materials science, carbon capture, or surface chemistry \n • Understanding of cement or concrete chemistry \n • Familiarity with data analysis tools \n \n Benefits \n • Hands-on experience in cutting-edge CO₂ utilisation technology \n • Exposure to leading industry partners and UK universities \n • Opportunity to contribute to real-world decarbonisation projects \n • Potential pathway to a full-time role based on performance \n

Part-Time | Hybrid | 20–30 Hours per Week \n 📍 Nottingham | Minimum one day per week in the office \n \n Bridge & Stitch is a UK clothing development and production consultancy helping brands bring responsibly made products to market. We work with start-ups, growing brands and established businesses, managing the entire process from design development through to production. Projects range across menswear, womenswear, childrenswear, babywear, casualwear, sportswear, technicalwear, formalwear, streetwear and reusable products for mid- to high-end markets. \n \n We're looking for an experienced Project Manager to take ownership of client accounts and lead projects across our full-service offering. \n \n This role is ideal for someone with experience in fashion product development who enjoys working directly with clients, solving problems, managing multiple projects and turning ideas into commercially viable products. \n \n The position is hybrid and flexible, making it suitable for parents or professionals seeking meaningful work alongside other commitments. \n \n The Role \n You will be the main point of contact for a portfolio of clients, guiding them through every stage of the development and production journey. \n \n Many of our clients are entering the clothing industry for the first time, so you'll need the confidence to advise, educate and support them while managing expectations, budgets and timelines. \n \n You will work closely with pattern cutters, factories and suppliers to ensure projects progress smoothly from concept to delivery. \n \n Key Responsibilities \n\n • Manage client accounts and build long-term relationships\n, • Lead projects from design development through sampling and production\n, • Create and amend technical packs using Adobe Illustrator\n, • Develop size charts and garment specifications\n, • Source fabrics, trims, embellishments and packaging\n, • Liaise with UK and overseas suppliers and manufacturing partners\n, • Review samples, manage fit comments and coordinate amendments\n, • Create and manage project timelines and critical paths\n, • Monitor costs, quotations and production schedules\n, • Ensure products meet client expectations, quality standards and delivery deadlines\n, • Handle project challenges proactively and professionally\n\n \n About You \n You'll have experience within the fashion, apparel or textile industry and be comfortable managing multiple projects simultaneously. \n \n Essential skills: \n\n • Strong project management and client relationship skills\n, • Proficiency in Adobe Illustrator and Microsoft Excel\n, • Experience creating tech packs and product specifications\n, • Good understanding of garment construction, fit and manufacturing processes\n, • Knowledge of fabrics, trims and sourcing\n, • Excellent organisation, communication and problem-solving skills\n, • Able to work independently while contributing to a small, collaborative team\n\n \n Desirable: \n\n • Experience working with UK manufacturing suppliers\n, • Pattern cutting or garment technology knowledge\n, • Experience fitting samples and communicating fit amendments\n, • Understanding of sustainable and ethical production practices\n\n \n What We Offer \n\n • Flexible working pattern across 3–5 days per week\n, • Hybrid working with genuine flexibility around family and personal commitments\n, • Hourly pay dependent on experience\n, • A friendly, supportive and values-led team\n, • The opportunity to work on a wide range of exciting fashion and textile projects\n, • Significant ownership, autonomy and direct impact within a growing business\n\n \n How to Apply \n\n • Please apply through LinkedIn with your CV and a short covering note outlining your relevant experience, salary expectation, availability and why you're interested in joining Bridge & Stitch.\n

Laser Cutter Supervisor Location: Nottingham Hours: Monday to Friday | 6:00am – 2:00pm (Day Shift) Salary: £17.00+ per hour The Opportunity We are recruiting for an experienced Laser Cutter Supervisor to join a well-established and growing engineering manufacturer in Nottingham. This is an excellent opportunity for a hands-on supervisor with strong laser cutting experience and proven leadership skills to take responsibility for the day-to-day running of a busy laser department. This role combines shop floor leadership with technical expertise, ensuring production targets are achieved safely, efficiently and to the highest quality standards. Key Responsibilities Supervise the daily operation of the laser cutting department. Lead, motivate and support a team of laser operators and production staff. Ensure production schedules are completed safely, on time and to customer requirements. Allocate workloads and monitor productivity across the department. Set up and operate CNC laser cutting machines when required. Carry out first-off inspections and ensure products meet quality standards. Monitor production quality and resolve any issues promptly. Minimise downtime by identifying production issues and implementing effective solutions. Work closely with Production Planning, Programming, Quality and Operations to maintain efficient workflow. Train, mentor and develop team members. Conduct return-to-work meetings, probation reviews and day-to-day people management responsibilities. Maintain high housekeeping standards throughout the department. Promote a strong health and safety culture, ensuring safe working practices are followed at all times. Liaise with the maintenance team regarding machine breakdowns and preventative maintenance. Drive continuous improvement initiatives to increase efficiency, quality and productivity. Assist with recruitment, onboarding and training of new employees when required. Essential Skills & Experience Previous experience supervising a laser cutting department or similar manufacturing team. Extensive experience operating industrial laser cutting machinery. Strong understanding of engineering drawings and sheet metal manufacturing. Excellent knowledge of fabrication processes. Ability to manage production priorities and meet demanding deadlines. Strong leadership and people management skills. Excellent communication and organisational abilities. High attention to detail with a quality-focused approach. Strong problem-solving skills. Good computer literacy. Desirable Experience Experience operating Bystronic, Trumpf, Amada or similar laser cutting equipment. Knowledge of ERP or MRP systems. Lean Manufacturing or Continuous Improvement experience. Forklift licence (preferred but not essential). First Aid qualification (advantageous). About You We're looking for someone who: Leads from the front and enjoys being hands-on. Can motivate and develop a production team. Takes ownership and accountability for departmental performance. Communicates effectively across all areas of the business. Thrives in a fast-paced engineering environment. Is proactive, organised and solutions-focused. Has a strong commitment to quality, safety and continuous improvement. What's on Offer £17.00 per hour. Permanent, full-time position. Monday to Friday day shift (6:00am – 2:00pm). Company pension. On-site parking. Ongoing training and development opportunities. Stable employment within a growing engineering business. Opportunity to play a key role in developing and leading a successful manufacturing team. About Us We specialise in connecting skilled professionals with leading opportunities across the Engineering, Technical, and Manufacturing sectors. We support businesses in securing reliable, long-term talent while helping candidates find roles that match their skills and career goals. #MANOS25

Are you an experienced Laser Cutter?HR Employment are looking for an experienced Laser Cutter to work with one of their prestigious clients based in the Nottingham area.Hours of Work for Laser CutterStandard hours and shift patterns as required by business needs. Flexibility will be required to support operational requirements and overtime opportunities.2 shifts 6am-2pm & 2pm-10pmPay Rate for Laser Cutter £15.00ph - £17.00ph depending on experienceKey Responsibilities for Laser CutterSet up, operate, and monitor laser cutting machines to produce components in line with production schedules and engineering specifications.Load and unload materials safely and efficiently.Read and interpret engineering drawings, work instructions, and production documentation.Carry out machine set-ups including tooling changes and machine adjustments where required.Perform quality inspections and checks throughout the manufacturing process using measuring equipment.Ensure all products meet company and customer quality standards.Monitor machine performance and identify any issues affecting production efficiency.Complete production records and relevant paperwork accurately.Carry out routine machine maintenance and basic preventative maintenance tasks.Maintain good housekeeping standards and ensure the work area remains clean and organised.Follow all Health & Safety procedures, company policies, and safe systems of work at all times.Work collaboratively with colleagues and support wider production requirements where necessary.Identify opportunities for continuous improvement within processes and workflows.Support training and development of team members where appropriate.Experience Required Laser CutterEssential:Previous experience operating laser cutting machinery within a manufacturing environment.Ability to read and understand engineering drawings.Experience using measuring equipment such as verniers, micrometers, and gauges.Strong attention to detail and quality-focused approach.Ability to work independently and as part of a team.Good problem-solving skills.Understanding of Health & Safety requirements within a manufacturing environment.Good communication skills.Flexible and reliable approach to work.Desirable:Experience operating CNC laser cutting equipment.Experience with sheet metal manufacturing processes.FLT licence or overhead crane experience.Knowledge of continuous improvement practices.Personal AttributesPositive attitude and willingness to learn.Self-motivated with a strong work ethic.Good organisational skills.Ability to work under pressure and meet production deadlines.Team player with a flexible approach.If you are interested please apply online now.TPBN1_UKTJ

CNC Turner x2 Location: Nottingham Salary: £17.50 - £18.50 per hour (depending on experience) Hours: 39 hours per week Monday - Thursday: 7:00am - 4:00pm Friday: 7:00am - 12:30pm Auxo Talent is recruiting on behalf of a well-established precision engineering company in Nottingham for two experienced CNC Turners. This is a fantastic opportunity to join a growing manufacturer renowned for producing high-quality precision components across a range of industries. If you're an experienced CNC Turner with programming, setting and operating experience who takes pride in producing high-quality work, we'd like to hear from you. The Role As a CNC Turner, you'll be responsible for programming, setting, and operating CNC turning machines to manufacture precision-engineered components to tight tolerances. Working within a modern machining environment, you'll play a key role in delivering quality products efficiently while supporting continuous improvement across the business. Key Responsibilities Programme, set, and operate CNC turning machines. Manufacture precision components in line with engineering drawings and customer specifications. Select appropriate tooling, machine settings, and cutting parameters for each job. Carry out first-off, in-process, and final inspections using precision measuring equipment. Read and interpret engineering drawings accurately. Maintain exceptional quality standards and work to tight tolerances. Meet production schedules while ensuring accuracy and efficiency. Carry out routine machine maintenance and maintain a clean, organised work area. Identify opportunities to improve machining processes and productivity. Comply with all Health & Safety procedures and company policies. Work collaboratively with colleagues to support production objectives. About You To be successful in this role, you'll have: Previous experience as a CNC Turner within a precision engineering environment. Experience programming, setting, and operating CNC turning machines. The ability to confidently read and interpret engineering drawings. A strong understanding of machining tolerances and quality standards. Experience using precision measuring equipment, including micrometers, verniers, and gauges. Excellent attention to detail and problem-solving skills. The ability to work independently and as part of a skilled manufacturing team. A positive attitude and commitment to producing high-quality components. Desirable Experience Experience using Fanuc, Mazatrol, or Siemens control systems. Experience machining a variety of materials, including stainless steel, aluminium, and mild steel. Knowledge of Lean Manufacturing or Continuous Improvement techniques. Experience working within an ISO-accredited manufacturing environment. What's on Offer? £16.50-£18.50 per hour, depending on experience. Permanent, full-time opportunity. Early finish every Friday. Overtime opportunities. A stable and growing precision engineering business. Modern machining environment with ongoing investment in equipment. Supportive team culture with opportunities for training and career progression.If you're looking to join a company that values quality, craftsmanship, and continuous improvement, apply today or contact Auxo Talent for a confidential discussion about this opportunity

Part-Time | Hybrid | 20–30 Hours per Week 📍 Nottingham | Minimum one day per week in the office Bridge & Stitch is a UK clothing development and production consultancy helping brands bring responsibly made products to market. We work with start-ups, growing brands and established businesses, managing the entire process from design development through to production. Projects range across menswear, womenswear, childrenswear, babywear, casualwear, sportswear, technicalwear, formalwear, streetwear and reusable products for mid- to high-end markets. We're looking for an experienced Project Manager to take ownership of client accounts and lead projects across our full-service offering. This role is ideal for someone with experience in fashion product development who enjoys working directly with clients, solving problems, managing multiple projects and turning ideas into commercially viable products. The position is hybrid and flexible, making it suitable for parents or professionals seeking meaningful work alongside other commitments. The Role You will be the main point of contact for a portfolio of clients, guiding them through every stage of the development and production journey. Many of our clients are entering the clothing industry for the first time, so you'll need the confidence to advise, educate and support them while managing expectations, budgets and timelines. You will work closely with pattern cutters, factories and suppliers to ensure projects progress smoothly from concept to delivery. Key Responsibilities • Manage client accounts and build long-term relationships, • Lead projects from design development through sampling and production, • Create and amend technical packs using Adobe Illustrator, • Develop size charts and garment specifications, • Source fabrics, trims, embellishments and packaging, • Liaise with UK and overseas suppliers and manufacturing partners, • Review samples, manage fit comments and coordinate amendments, • Create and manage project timelines and critical paths, • Monitor costs, quotations and production schedules, • Ensure products meet client expectations, quality standards and delivery deadlines, • Handle project challenges proactively and professionally About You You'll have experience within the fashion, apparel or textile industry and be comfortable managing multiple projects simultaneously. Essential skills: • Strong project management and client relationship skills, • Proficiency in Adobe Illustrator and Microsoft Excel, • Experience creating tech packs and product specifications, • Good understanding of garment construction, fit and manufacturing processes, • Knowledge of fabrics, trims and sourcing, • Excellent organisation, communication and problem-solving skills, • Able to work independently while contributing to a small, collaborative team Desirable: • Experience working with UK manufacturing suppliers, • Pattern cutting or garment technology knowledge, • Experience fitting samples and communicating fit amendments, • Understanding of sustainable and ethical production practices What We Offer • Flexible working pattern across 3–5 days per week, • Hybrid working with genuine flexibility around family and personal commitments, • Hourly pay dependent on experience, • A friendly, supportive and values-led team, • The opportunity to work on a wide range of exciting fashion and textile projects, • Significant ownership, autonomy and direct impact within a growing business How to Apply • Please apply through LinkedIn with your CV and a short covering note outlining your relevant experience, salary expectation, availability and why you're interested in joining Bridge & Stitch.

Shift Manager Locations: Nottingham Salary: Up to £50,000 Employment Type: Full Time The Opportunity Pivt is partnering with an innovative supply chain technology business that's transforming the way goods move across the UK. Combining cutting-edge technology, data-driven decision making and operational excellence, our client is redefining last-mile logistics by building smarter, faster and more efficient delivery networks. Following continued growth, they're now looking to appoint three Shift Managers across Birmingham, Nottingham and London. This is an excellent opportunity for an ambitious operations leader who thrives in fast-paced, high-volume environments and enjoys leading teams to deliver exceptional service. The Role As Shift Manager, you'll be responsible for overseeing the day-to-day operation during your shift, ensuring productivity, safety and service targets are consistently achieved. You'll lead from the front, motivating your team, driving operational performance and continuously identifying opportunities to improve efficiency. Whether you're leading a day or night operation, you'll play a key role in delivering an exceptional customer experience while maintaining a safe and engaged working environment. Key Responsibilities Lead the daily warehouse and sortation operation to achieve productivity and service targets. Manage, motivate and develop a team of operatives to deliver high performance. Support recruitment, onboarding and training of new team members. Monitor KPIs and use operational data to identify improvement opportunities. Drive continuous improvement initiatives across safety, productivity and quality. Ensure Health & Safety policies are followed and promote a positive safety culture. Resolve operational challenges quickly to minimise disruption. Collaborate with wider operational teams to improve site performance. Deliver shift handovers and accurate operational reporting. Maintain high standards of housekeeping, compliance and operational discipline. About You We're looking for individuals who can demonstrate: Previous experience managing teams within warehouse, logistics, fulfilment, parcel, manufacturing or fast-paced operational environments. Strong leadership skills with the ability to motivate and develop high-performing teams. Excellent communication and decision-making abilities. A proactive approach to problem solving. Confidence using operational data and KPIs to drive performance improvements. Experience working within a safety-focused environment. A hands-on leadership style with the ability to thrive under pressure. A passion for continuous improvement and operational excellence. What's on Offer Salary up to £50,000 Opportunities available in Birmingham, Nottingham and London Join one of the UK's most exciting and innovative supply chain technology businesses. Genuine career progression within a rapidly growing organisation. A collaborative, high-performance culture where innovation is encouraged. Comprehensive benefits package including healthcare, enhanced holiday entitlement and additional employee perks. If you're an ambitious operations leader looking to take the next step in your career, we'd love to hear from you. For a confidential discussion or to apply, please contactvwith Pivt

Senior Salmon are working with a local Manufacturer and we are looking for Sewing Machinists to join their established team in their modern production facility in NottinghamAs a Sewing Machinist you will mark and cut various fabrics and sew these to patterns using lockstitch and lockstitch machines.Duties will include:Operate Lockstitch and overlock sewing machinesManual and Mechanical fabric cutting / Cutting basic patternsCleaning of equipmentOrganisation of MaterialsTo ensure work area and environment is kept clean, tidy and organised.These positions are working regular days and offer a great opportunity for a career after an initial trial period on the agency.Apply now or call Mark on 01623 857585TPBN1_UKTJ

Panel Wireman – Nottingham Salary: £33,421 – £36,500 per annum Hours: Monday to Thursday, 7.15am – 5.30pm (39 hours, 4-day week)My client, part of a global engineering group, is seeking an experienced Switchgear Panel Wireman to join their brand-new, state-of-the-art facility in Nottingham. This role is ideal for a Panel Wireman who enjoys working on complex, high-quality electrical systems and wants to be part of a supportive, close-knit team.You'll be working on cutting-edge switchgear projects that power data centres for some of the world's largest technology companies, offering long-term stability and excellent career prospects.? Why Join This Business? 4-day working week – enjoy long weekends every week20 days holiday (based on a 4-day week) plus Christmas shutdownOvertime paid at 1.5xOn-site parking & paid lunch breaksHealth plan, death in service and EAP (after probation)Long-term career with a well-established and growing company?? The Role – Panel Wireman As a Panel Wireman , you will:Manufacture and assemble high-quality electrical switchgear systemsWork from CAD drawings and electrical schematicsUse tools and machinery safely and efficientlyCollaborate with the production team to meet build targetsMaintain 5S standards to ensure a safe, organised workspaceFollow all health and safety procedures?? About You Proven experience in electrical wiring, assembly or manufacturingConfident using hand tools and power toolsStrong communication skills and a team-focused approachExcellent attention to detail and commitment to qualityAble to work independently with good time managementIf you're a skilled Panel Wireman looking to progress your career with a forward-thinking business that values its people, my client would love to hear from you.Apply today to be considered.#INDPPTPBN1_UKTJ

An exciting new opportunity has arisen in Nottinghamshire...we are looking for a garment technologist, ideally with woven experience to work for a respected brand. This role will be responsible for the development of new seasonal ranges of men's and womenswear apparel, working within a team to organise the production of approved prototypes thorough liaison with designers and specific factories. There will be regular correspondence with the production team regarding information at ‘pre-production’ stage and assisting with all technical aspects of garments produced by the design department. To be considered you will have worked with woven product and have a strong understanding of construction, pattern cutting and garment fit. Along with a competitive salary, clothing allowance and generous staff discount, this role offers the chance to work for a brand that is going from strength to strength. So apply today to avoid missing out!

Laser Cutting Supervisor Location: Nottingham Salary: £34,000 - £36,000 Hours: Monday to Friday | 6:00am - 2:00pm (Day Shift) Auxo Talent is proud to be recruiting on behalf of a well-established engineering and manufacturing business for an experienced Laser Cutting Supervisor. This is an excellent opportunity for a hands-on leader with strong laser cutting experience to take ownership of a busy production department, leading a team while remaining actively involved in day-to-day manufacturing operations. If you're passionate about quality, safety, continuous improvement, and getting the best from your team, we'd love to hear from you. The Role As the Laser Cutting Supervisor, you'll oversee the daily operation of the laser cutting department, ensuring production targets are achieved safely, efficiently, and to the highest quality standards. You'll lead by example, supporting your team while working closely with production, planning, quality, and engineering teams to ensure smooth workflow and operational excellence. Key Responsibilities Supervise the day-to-day running of the laser cutting department. Lead, motivate, and develop a team of Laser Cutting Operators and production staff. Allocate workloads and ensure production schedules are delivered safely and on time. Set up and operate laser cutting machinery as required, providing hands-on support to the team. Carry out first-off inspections and ensure components meet engineering drawings and customer specifications. Monitor quality throughout production and implement corrective actions where necessary. Identify production issues, minimise downtime, and drive improvements in efficiency. Work closely with Production Planning, Programming, Quality, and Operations teams to maintain workflow. Train, mentor, and support team members to maximise performance and development. Conduct return-to-work meetings, probation reviews, and day-to-day people management activities. Maintain excellent housekeeping standards and promote a strong Health & Safety culture. Liaise with the maintenance team regarding machinery faults and planned maintenance. Support recruitment, onboarding, and induction of new employees. Champion continuous improvement initiatives across the department. About You To be successful in this role, you'll have: Previous supervisory experience within a laser cutting or manufacturing environment. Extensive hands-on experience operating industrial laser cutting machinery. Strong knowledge of engineering drawings and sheet metal fabrication. Excellent leadership, organisational, and people management skills. The ability to prioritise workloads and meet production deadlines. A proactive approach to problem-solving and continuous improvement. Strong communication skills and the ability to build positive relationships across departments. Good IT skills and experience working with manufacturing systems. Desirable Experience Experience with Bystronic, Trumpf, Amada, or similar laser cutting equipment. Knowledge of ERP/MRP systems. Lean Manufacturing or Continuous Improvement experience. Forklift licence. First Aid qualification. What's on Offer? £34,000 - £36,000 Permanent, full-time position. Monday to Friday day shifts (6:00am-2:00pm) with an excellent work-life balance. Company pension. On-site parking. Ongoing training and career development opportunities. A supportive and growing manufacturing business where you can make a real impact. The opportunity to lead a skilled team while remaining hands-on in a modern production environment.If you're an experienced Laser Cutting Supervisor looking to take the next step in your career, apply today or contact Auxo Talent for a confidential discussion

Field Service Engineer – Medical Devices Respiratory Diagnostics | East Midlands to North East £38,000 - £40,000 Basic Salary + £10,000 Annual Bonus + Car Allowance + Excellent Benefits Package Are you a technically minded Field Service Engineer looking to join a business that genuinely improves patient outcomes every single day? This is an opportunity to join a highly respected and ethically driven medical technology organisation with an outstanding reputation for clinical excellence, customer service and employee development. The business invests heavily in its people, offering exceptional training, genuine career progression and the chance to work with market-leading respiratory diagnostic technology used across both the public and private healthcare sectors. Territory Covering the East Midlands through to the North East, including: Derby Nottingham Sheffield York Occasional travel to Newcastle and Sunderland Candidates based anywhere across the region will be considered, with ideal locations including Derby, Nottingham, Sheffield or York. The Technology You will support a comprehensive portfolio of cutting-edge respiratory diagnostic systems including: Spirometry Single Breath CO Gas Transfer Lung Volumes and Gas Dilution Full Body Plethysmography Cardiopulmonary Exercise Testing (CPET) ECG solutions The Role As a field-based engineer, you will be responsible for supporting and maintaining an installed base of highly sophisticated respiratory diagnostic equipment within hospitals and healthcare facilities across your territory. You will play a critical role in ensuring customers receive exceptional service whilst helping deliver improved patient care through reliable and efficient medical technology. Your responsibilities will include: Planned preventative maintenance and servicing Fault diagnosis and equipment repairs Installation and commissioning of new systems Software updates and connectivity support Customer training and technical assistance Ensuring service level agreements are consistently achieved Supporting equipment roll-outs and implementation projects The role will involve occasional overnight stays depending on customer requirements and project activity. About You We are keen to speak with ambitious and customer-focused engineers currently working within: Medical Devices Life Sciences Scientific Instrumentation Laboratory Equipment Healthcare Technology You will ideally bring: Experience of field-based service engineering Knowledge of software upgrades, networking and connectivity concepts A project-focused approach to problem solving Technical engineering qualifications or relevant technical training Strong customer-facing communication skills The ability to explain technical concepts to end users and clinicians Excellent organisational and time management skills A proactive, self-motivated approach and the ability to work autonomously Flexibility to travel and stay away when required A full UK driving licence Why Apply? Join a company recognised for delivering outstanding clinical outcomes. Work with innovative, market-leading respiratory diagnostic technology. Excellent earning potential with bonus and comprehensive benefits package. Genuine opportunities for progression and long-term career development. * Become part of an organisation where ethics, patient care and employee wellbeing sit at the heart of everything they do. If you're looking for a role where your technical expertise directly impacts patient care whilst offering genuine career progression, we'd love to hear from you

Laser Cutting Operator x2 Location: Nottingham Salary: £16.00 - £17.00 per hour (DOE) Shifts: Rotating shifts (6:00am-2:00pm / 2:00pm-10:00pm) Auxo Talent is recruiting on behalf of a well-established manufacturing business for two experienced Laser Cutting Operators to join their production team. This is an excellent opportunity to work with a respected employer that values quality, continuous improvement, and employee development. As a Laser Cutting Operator, you'll play a key role in ensuring components are manufactured accurately, efficiently, and to the highest quality standards while maintaining a safe and organised working environment. Key Responsibilities Set up, operate, and monitor laser cutting machinery to manufacture components in line with production schedules and engineering drawings. Safely load and unload raw materials and finished products. Read and interpret engineering drawings, work instructions, and production documentation. Carry out machine set-ups, tooling changes, and adjustments where required. Perform in-process quality inspections using measuring equipment including verniers, micrometers, and gauges. Ensure all products meet customer specifications and company quality standards. Monitor machine performance, identify faults, and report production issues promptly. Complete production documentation and records accurately. Carry out routine machine maintenance and basic preventative maintenance. Maintain high standards of housekeeping and comply with all Health & Safety procedures. Work collaboratively with colleagues to support production targets and business objectives. Contribute to continuous improvement initiatives to enhance productivity and efficiency.About You We're looking for someone who has: Previous experience operating laser cutting machinery within a manufacturing environment. The ability to read and interpret engineering drawings. Experience using precision measuring equipment. A strong eye for detail and commitment to producing high-quality work. Good problem-solving abilities and a proactive approach. Excellent communication skills and the ability to work both independently and as part of a team. A good understanding of Health & Safety within a manufacturing environment. A reliable, flexible, and positive attitude.Desirable Skills Experience operating CNC laser cutting equipment. Knowledge of sheet metal manufacturing processes. FLT licence and/or overhead crane experience. Understanding of Lean Manufacturing or Continuous Improvement principles.What's on Offer? £15.00-£17.00 per hour depending on experience. Rotating shift pattern (6:00am-2:00pm / 2:00pm-10:00pm). Overtime opportunities. Permanent, full-time opportunity with a stable and growing manufacturer. Supportive working environment with opportunities for training and development.If you're an experienced Laser Cutting Operator looking for your next opportunity, we'd love to hear from you. Apply today or contact Auxo Talent for a confidential discussion

Are you an experienced Laser Programmer?HR Employment Bureau are looking for an experienced Laser Programmer work with one of there prestigious clients based in the Nottingham area.Working hours of Laser Programmer:09:00 - 17:00Pay Rate of Laser Programmer:£14.00ph (increases after probation period)Key Responsibilities of Laser ProgrammerProduce accurate laser cutting programs from customer drawings and CAD files.Create efficient nests to maximise material utilisation and reduce waste.Generate production documentation, including route cards and work instructions where required.Ensure programs meet customer specifications and quality requirements.Work closely with Production Planning to prioritise urgent work and meet delivery deadlines.Liaise with Estimating and Sales regarding manufacturability and material requirements.Review customer drawings and identify potential manufacturing issues before production.Maintain accurate programming records and documentation.Support continuous improvement by reviewing programming methods and improving efficiencies.Assist with troubleshooting production issues relating to programmed parts.Communicate effectively with shop floor operators to resolve programming queries.Ensure revision control is maintained for customer drawings and programs.Support new product introductions and prototype work.Comply with all Health & Safety policies and company procedures.Essential Skills & Experience of Laser ProgrammerPrevious experience programming laser cutting machinery within a manufacturing or fabrication environment.Ability to read and interpret engineering drawings.Experience using CAD/CAM programming software.Strong understanding of sheet metal fabrication processes.Excellent attention to detail.Good mathematical and problem-solving skills.Strong organisational skills with the ability to prioritise workloads.Computer literate with experience using Microsoft Office.Ability to work both independently and as part of a team.Desirable SkillsExperience with Bystronic BySoft, Trumpf Boost, Solidworks or similar programming software.Knowledge of ERP/MRP systems.Experience within precision engineering or sheet metal manufacturing.Understanding of Lean Manufacturing and Continuous Improvement principles.Personal Attributes:We are looking for someone who:Has excellent attention to detail.Is highly organised and able to manage multiple priorities.Takes pride in producing accurate work.Works proactively to solve problems before they arise.Communicates effectively with colleagues across all departments.Is motivated to continuously improve processes and efficiencies.Works well under pressure to meet production deadlines.What our client offers:Competitive salary based on experience.Permanent, full-time position.Company pension scheme.On-site parking.Opportunities for training and career development.A supportive and collaborative working environment.The opportunity to join a growing and forward-thinking engineering business.If you are interested please apply onlineTPBN1_UKTJ

Regional H&S Advisor Location: Nottingham Salary: Up to £40,000 package including travel Driving Licence needed as travelling to clients At Citation, we don’t just provide jobs; we create careers that inspire, empower, and elevate. As one of the UK’s leading providers of Health & Safety, HR, Employment Law, and ISO services, we’ve spent 30 years building a legacy of excellence. This milestone isn’t just a celebration of our past—it’s a springboard for our future, and we want you to be a part of it. • We’re not your average service provider. Our people bring their whole selves to work, combining their skills with their personalities to deliver outstanding client experiences., • With year-on-year double-digit growth, this is your chance to join a fast-moving business that values vision, determination, agility, and a knack for building great relationships., • We’ve built our success without cutting costs or creating bureaucracy. Instead, we prioritise actions over politics, empowerment over micro-management, and innovation over hierarchy. We are leaders who love what we do – and we want you to share in that passion. This is a truly exciting time to become part of Citation. With over 110,000 clients who love and rely on us across the group – and 15 business acquisitions in just three years – our ambition for growth has no limits. We’re also backed by KKR, Hg Capital, and HarbourVest, three of the world’s most respected private equity investors. Their new investment strengthens our position, ensuring stability and providing a solid foundation for even greater success over the next 3–5 years and beyond. Why Consultancy? Expand Your Expertise Working at a Health and Safety consultancy offers a rare opportunity to broaden your horizons. You’ll gain exposure to diverse industries, tackle unique challenges, and develop a skill set that’s second to none. Whether you’ve worked in a specific sector for years or are looking for a new adventure, don’t worry—we don’t expect you to know it all! We provide the training and support to help you thrive in every situation. Kickstart Your Health & Safety Career with Citation – Where Your Potential Meets Opportunity Are you ready to make your mark in the world of Health & Safety? Whether you’re just starting out or looking for a career boost, we’re here to propel you forward with unparalleled support, exciting growth opportunities, and a clear path to success. Why Join Us? Our trailblazing Development Scheme, launched in 2017, has been the springboard for the next generation of Health & Safety stars. Over the past eight years, we’ve mastered the art of making training, studying, and working full-time not only achievable but genuinely exciting. This is your chance to combine your passion with a practical pathway to success in the field. What’s in It for You? • Learn from the Best: Work alongside our seasoned consultants, gaining hands-on experience and building your Health & Safety expertise from day one., • Funded Training & Qualifications: We’ll fully fund your training, guiding you through the NVQ route while you gain practical experience., • Tech IOSH as a Foundation: Already Tech IOSH? Great! If not, show us that you have the knowledge and experience to be; we can work together on the rest., • Structured Progression: Transition from development to a field-based consultant role, with continued support to achieve Cert IOSH and ultimately CMIOSH status., • Diverse Growth Opportunities: Dive into advanced areas like fire safety, DSEAR, and environmental monitoring for air, noise, and vibration – the sky’s the limit. What We’re Looking For We’re not just hiring for technical skills – we’re looking for passionate, driven individuals with big ambitions. Whether you’re already working in Health & Safety or come from a completely different field, we want to hear from you. Your personality, potential, and hunger to learn matter most. The Role • Full-time, permanent position with a clear path to becoming a Health & Safety Field Consultant., • Comprehensive on-the-job training within our field, technical, and content teams., • The flexibility to study and work – perfected by us to ensure your success., • A driving license is essential by the time you complete the program, as the role involves client site visits. What Happens Next? After successfully completing the scheme, you’ll join our team as a fully-fledged Health & Safety Field Consultant. From there, the opportunities to grow and expand your expertise are endless – whether you want to specialise further, take on leadership roles, or even oversee multiple compliance services. What We’re Looking For • Tech IOSH Status: At minimum, you’ll need to hold Tech IOSH status, with proof to back it up., • Passion for Safety: A genuine enthusiasm for building a rewarding career in Health & Safety is essential., • Driving License: While location-dependent, a valid driving license will be required to ensure you're ready for client site visits when the time comes. What Makes Citation Different? At Citation, we’ve spent three decades creating a culture where people thrive. This isn’t just a job—it’s a place where your talent is celebrated, your ideas are valued, and your career can flourish. Here’s What You Can Look Forward To: • Diverse Opportunities: No two days are the same, thanks to the wide range of industries we support., • Supportive Environment: Join a team of over 150 professionals who are always ready to share knowledge and help you succeed., • Celebrating You: From birthdays off to pawternity leave, we know how to make our colleagues feel valued. And the Perks Don’t Stop There: • 25 Days Holiday + Bank Holidays: Plus, your birthday off—because celebrating you matters., • Post-Wedding Bliss: Extra holiday to enjoy life’s special moments., • Healthcare Cash Plan: Prioritising your health and wellbeing., • Pawternity Leave: A day off to welcome your new furry family member., • Community Days: Time off to volunteer and give back to causes you care about As we celebrate 30 years of success, we’re more excited than ever about the future. If you’re ready to work with a team that values your expertise, creativity, and personality, we’d love to welcome you to Citation. This is your chance to be part of a company where your work doesn’t just make a difference—it defines the future of Health & Safety. Ready to start your journey? Let’s talk!

Are you an experienced Laser Cutter Supervisor?HR Employment Bureau are looking for an experienced Laser Cutter Supervisor to work with one of there prestigious clients based in the Nottingham area.Working hours for Laser Cutter Supervisor06:00 - 14:00Pay rate for Laser Cutter Supervisor£17.00phThe successful candidate will be responsible for supervising the laser cutting team, ensuring production targets are achieved, maintaining quality standards and supporting continuous improvement across the department.Key Responsibilities for the Laser Cutter SupervisorSupervise the day-to-day operation of the laser cutting department.Lead, motivate and support a team of laser operators and production staff.Ensure daily production schedules are achieved safely, efficiently and on time.Allocate work and monitor workload across the team.Set up and operate laser cutting machinery where required.Carry out first-off inspections and ensure products meet customer specifications.Monitor quality throughout production and address any issues promptly.Minimise downtime by identifying production issues and implementing solutions.Work closely with Programming, Production Planning, Quality and Operations to ensure smooth workflow.Train, coach and develop members of the team.Conduct return to work meetings, probation reviews and day-to-day people management where required.Ensure housekeeping standards are maintained within the department.Promote and maintain a positive health and safety culture, ensuring all safe working procedures are followed.Report machinery issues and liaise with the maintenance team where necessary.Drive continuous improvement initiatives to improve efficiency and productivity.Support recruitment and induction of new employees when required.Essential Skills & Experience Laser Cutter SupervisorPrevious experience supervising a laser cutting department or manufacturing team.Extensive experience operating industrial laser cutting machinery.Strong understanding of engineering drawings and manufacturing processes.Excellent knowledge of sheet metal fabrication.Proven ability to manage workloads and prioritise production requirements.Strong leadership and people management skills.Good communication and organisational skills.Quality-focused with excellent attention to detail.Good problem-solving ability.Computer literate.DesirableExperience with Bystronic, Trumpf, Amada or similar laser machinery.Knowledge of ERP/MRP systems.Continuous Improvement or Lean Manufacturing experience.Forklift licence (preferred but not essential).First Aid qualification (desirable).We are looking for someone who:Leads by example.Is proactive rather than reactive.Takes ownership and accountability.Builds positive working relationships across departments.Supports and develops their team.Thrives in a fast-paced manufacturing environment.Has a commitment to delivering high-quality work and exceptional customer service.Our customers offers for the right Laser Cutter Supervisor£17.00 per hour.Company pension.On-site parking.Opportunities for training and career development.Supportive and growing engineering business.Opportunity to make a real impact within an established manufacturing team.If you are interested please apply online nowTPBN1_UKTJ

CAD Technician - Bespoke Joinery & Fit-Out CAD Technician / Design Engineer - a leading joinery and interior fit-out specialist based in Nottingham is searching for a CAD Technician / Design Engineer to join the growing team. This is an excellent opportunity for a CAD Technician / Design Engineer join a successful business delivering high-end bespoke joinery solutions across commercial, healthcare, education sectors. This role offers the opportunity to take ownership of projects from initial design through to manufacture and installation. Why Apply: Our client has cemented themselves as one of the leading specialist contractors in the East Midlands; they have an impressive network of repeat clients including main contractors and end-users. The business is entering a period of growth and offers the opportunity to make a difference in a business focussed on training, development and progression of the team. Salary & Package: - Basic salary of £32,500 - £42,500 (DOE) - 25 days holiday + bank holidays. - Healthcare Scheme - Company Pension Key Benefits: - Growing business with a low staff t/o across all departments - Modern office environment and supportive team - Privately owned with excellent I.T systems - Excellent training and development Key Duties: - Produce detailed 2D AutoCAD drawings for manufacture and installation - Create 3D design visuals using relevant CAD - Interpret design concepts and develop accurate manufacturing drawings - Complete material take-offs and quantities for sheet materials, solid surfaces, glass and hardware - Source supplier quotations and support material procurement - Produce cutting lists and CNC-ready information for manufacturing - Work closely with production teams to ensure designs meet project specifications Requirements: - Proven experience as a CAD Technician, Design Engineer, Setting Out Technician or Technical Designer - Strong 2D AutoCAD skills with experience in bespoke joinery, shopfitting, furniture or interior fit-out projects - Understanding of manufacturing processes and technical drawings - Experience producing cutting lists and production information To qualify for the higher rate of pay you must be able to demonstrate a track record as a CAD Technician / Design Engineer within the bespoke joinery or interior refurbishment sector. Apply Now! For any further information on this CAD Technician / Design Engineer vacancy please apply with your CV attached or contact Mark Dalgleish at Saxton Recruitment on (phone number removed). Building Partnerships

Ground Maintenance Operatives Needed- Nottingham Grounds Maintenance operatives are needed in the Nottingham area to work for one of the UK's leading landscape/grounds maintenance companies. Daily duties will include grass/lawn cutting, litter picking, strimming, edging, hedge cutting, weed control, using mowers and powered tools, and other general landscape labour duties as directed by the supervisor. 6.30am till 4pm, Monday to Friday CANDIDATE MUST HAVE A DBS AND DRIVING LICENSE Experience and a drivers license is essential. Pay: £14.57 per hour The depo is in the NG5 Area Starts ASAP

Belmont Recruitment are currently looking for a Gardener/Driver to join Nottingham City Council on an initial 3 month temporary contract as part of their Cemetery Team. Key Responsibilities Grass cutting using pedestrian and ride-on mowers Strimming and edging Hedge cutting and shrub maintenance Weed control and litter picking Planting and maintaining flower beds and landscaped areas Leaf clearance and seasonal grounds maintenance duties Requirements Previous experience in grounds maintenance, gardening, landscaping or a similar outdoor role Experience using grounds maintenance equipment including mowers, strimmers and hedge cutters * Full UK Driving Licence (essential) Hours - 8am to 4pm, Monday to Friday Please apply with an up to date CV ASAP if this role would be of interest to you

Job Title: Grounds Maintenance Operative Location: Nottingham Pay: £14 per hour Hours: Monday to Friday, 6:30am – 4:00pm About the Role We are recruiting on behalf of a well-established grounds maintenance company looking for a reliable Grounds Maintenance Operative to join their team in Nottingham. This is a hands-on outdoor role working across a range of sites helping to keep outdoor spaces clean, tidy and well maintained. This opportunity would suit someone with previous grounds maintenance or landscaping experience who enjoys working outdoors and as part of a team. People with backgrounds as a gardener, landscape operative, greenkeeper, estate operative, or outdoor maintenance worker may also find their experience highly transferable. What You’ll Do • Carry out general grounds maintenance duties across a variety of sites • Grass cutting using pedestrian and ride-on mowers • Hedge cutting, pruning and strimming • Weed control and spraying using PA1 and PA6 certification • Litter picking and general site tidying • Support landscaping and seasonal maintenance work • Travel between sites using company vehicles where required • Work safely and follow health and safety procedures What We’re Looking For • Previous experience in grounds maintenance, landscaping, gardening or similar outdoor maintenance roles • Valid PA1 and PA6 spraying licences • Full UK driving licence • Ability to work outdoors in all weather conditions • Reliable, punctual and able to work well as part of a team Who Might Suit This Role This role could be a great fit for someone who has worked as a gardener, landscape operative, groundskeeper, estate maintenance worker, parks operative or environmental services operative. Candidates from facilities maintenance, property maintenance, or horticulture backgrounds may also have very relevant experience. Why Join • Stable Monday to Friday working hours • Early finish compared to many outdoor roles • Opportunity to work outdoors in varied locations • Supportive team environment • Immediate start available If you have the required licences and experience and are looking for a new opportunity in grounds maintenance, we would love to hear from you

Welder Fabricator Location: Nottingham Hours: 40 hours per week, Day Shift Salary: Competitive (DOE) + Overtime Available Welder Fabricator - Nottingham We are currently recruiting for an experienced Welder Fabricator to join a well-established manufacturing business based in Nottingham. This is an excellent opportunity for a skilled individual seeking a stable, full-time, day-shift position within a busy and growing workshop environment. The successful candidate will be working with both mild steel and stainless steel, producing high-quality fabricated components and assemblies from engineering drawings. Key Responsibilities Fabrication and welding of mild steel and stainless steel components. Reading and interpreting technical and engineering drawings. MIG and TIG welding to a high standard. Measuring, cutting, forming and assembling metalwork. Operating workshop machinery and fabrication equipment safely. Inspecting finished products to ensure quality standards are met. Maintaining a clean, safe and organised working environment.Requirements Previous experience as a Welder Fabricator within a manufacturing or engineering environment. Ability to read and work from engineering drawings. Experience welding mild steel and stainless steel. Competent with MIG welding; TIG welding experience would be advantageous. Strong attention to detail and commitment to quality. Ability to work independently and as part of a team.What's On Offer? Full-time permanent position. 40-hour week on a day shift. Competitive salary depending on experience. Overtime opportunities available. Secure and stable employment with a reputable company. Friendly and supportive working environment.If you are an experienced Welder Fabricator looking for your next opportunity in Nottingham, we'd like to hear from you. Apply today with your CV for immediate consideration

Regional H&S Consultant Location: Nottingham Salary: Up to £50,000 package including travel Driving Licence needed as travelling to clients At Citation, we don’t just provide jobs; we create careers that inspire, empower, and elevate. As one of the UK’s leading providers of Health & Safety, HR, Employment Law, and ISO services, we’ve spent 30 years building a legacy of excellence. This milestone isn’t just a celebration of our past—it’s a springboard for our future, and we want you to be a part of it. • We’re not your average service provider. Our people bring their whole selves to work, combining their skills with their personalities to deliver outstanding client experiences., • With year-on-year double-digit growth, this is your chance to join a fast-moving business that values vision, determination, agility, and a knack for building great relationships., • We’ve built our success without cutting costs or creating bureaucracy. Instead, we prioritise actions over politics, empowerment over micro-management, and innovation over hierarchy. We are leaders who love what we do – and we want you to share in that passion. This is a truly exciting time to become part of Citation. With over 110,000 clients who love and rely on us across the group – and 15 business acquisitions in just three years – our ambition for growth has no limits. We’re also backed by KKR, Hg Capital, and HarbourVest, three of the world’s most respected private equity investors. Their new investment strengthens our position, ensuring stability and providing a solid foundation for even greater success over the next 3–5 years and beyond. Why Consultancy? Expand Your Expertise Working at a Health and Safety consultancy offers a rare opportunity to broaden your horizons. You’ll gain exposure to diverse industries, tackle unique challenges, and develop a skill set that’s second to none. Whether you’ve worked in a specific sector for years or are looking for a new adventure, don’t worry—we don’t expect you to know it all! We provide the training and support to help you thrive in every situation. Your Role: Protecting People, Empowering Businesses At Citation, people are at the heart of what we do—and as a Health and Safety Consultant, you’ll play a critical role in safeguarding our clients’ most valuable asset: their people. Your mission is to embed a culture of best practice with your clients, making safety a cornerstone of their operations. You understand that good health, wellbeing, and safety aren’t just checkboxes—they’re about exceptional management and leadership. Your Key Responsibilities: • Complex Problem-Solving: Dive into intricate client challenges and deliver tailored solutions., • Policy Mastery: Create and implement advanced H&S policies that set clients up for success., • Training Guru: Deliver impactful training sessions, helping clients raise the bar for safety standards., • Gold-Standard Guidance: Advise clients on best practices and ensure they exceed industry benchmarks., • Client Champion: Build lasting relationships as the trusted advisor clients turn to for support., • Legislation Pro: Stay ahead of regulatory changes and provide expert advice to keep clients compliant. This year, we’re celebrating an incredible milestone: 30 years of helping businesses thrive. But we’re not resting on our laurels—we’re evolving, innovating, and adapting to the ever-changing world of compliance and H&S regulations. With new government changes reshaping the landscape, businesses need expert guidance more than ever. As part of our team, you’ll be at the forefront of helping clients navigate these complexities while contributing to our rich legacy of excellence. About You: The Ideal Candidate We’re looking for engaging professionals with a passion for Health & Safety and a people-first approach. If you meet the following criteria, we’d love to hear from you: • Qualifications: NEBOSH Diploma or equivalent experience., • Professional Membership: Cert IOSH or actively working toward Chartered status., • People Skills: Exceptional communication and relationship-building abilities., • Experience: Whether you’re seasoned in the field or have honed your expertise through hands-on work, you’ll find a place to grow here., • Drive and Curiosity: A commitment to staying ahead of industry changes and delivering exceptional client service. What Makes Citation Different? At Citation, we’ve spent three decades creating a culture where people thrive. This isn’t just a job—it’s a place where your talent is celebrated, your ideas are valued, and your career can flourish. Here’s What You Can Look Forward To: • Diverse Opportunities: No two days are the same, thanks to the wide range of industries we support., • Supportive Environment: Join a team of over 150 professionals who are always ready to share knowledge and help you succeed., • Celebrating You: From birthdays off to pawternity leave, we know how to make our colleagues feel valued. And the Perks Don’t Stop There: • 25 Days Holiday + Bank Holidays: Plus, your birthday off—because celebrating you matters., • Post-Wedding Bliss: Extra holiday to enjoy life’s special moments., • Healthcare Cash Plan: Prioritising your health and wellbeing., • Pawternity Leave: A day off to welcome your new furry family member., • Community Days: Time off to volunteer and give back to causes you care about As we celebrate 30 years of success, we’re more excited than ever about the future. If you’re ready to work with a team that values your expertise, creativity, and personality, we’d love to welcome you to Citation. This is your chance to be part of a company where your work doesn’t just make a difference—it defines the future of Health & Safety. Ready to start your journey? Let’s talk!

Are you a Medical Sales Representative with medical devices, medical consumables, or medical equipment experience gained in Critical Care, Intensive Care, ICU, Neonatal settings or similar? Interested in developing your sales career within Respiratory Medicine? This is a field-based role, driving consultative sales across a mix of technical consumables & capital equipment. We have some of the very best products, and customer / employee training programmes, available anywhere. BASIC SALARY: £55,000 - £60,000 BENEFITS: · Commission (up to £30,000), paid annually in January. · Company Pension Scheme (minimum employee contribution of 4% & Company will pay 5% and match up to 8%). · Company Car option (up to £860 per month lease price). · 25 Days Annual Holiday. · Group Income Protection Scheme. · Private Healthcare including Optical & Dental. · Life Assurance etc. LOCATION: This is a field-based position, covering the North-East of England and managing a large geographic territory from Newcastle, Scottish Borders, Durham, Middlesbrough, Derby, Nottinghamshire, Leeds, Sheffield, Doncaster, Hull, York, and Harrogate. JOB DESCRIPTION: Territory Sales Manager, Medical Devices Sales Representative - Critical Care, Intensive Care, Respiratory Medicine, Patient Ventilators, Endoscopy, ICU, CCU This is a classic Medical Device Territory Manager role, covering a base of hospitals. Selling into ICU, Theatre, Recovery Room, and more. Some sales are won via tenders, others are more ad-hoc. Close clinical and technical support is provided to your prospects and customers from a designated Clinical Nurse Applications Specialist, and a local Field Service Engineer. KEY RESPONSIBILITIES: Territory Sales Manager, Medical Devices Sales Representative - Critical Care, Intensive Care, Respiratory Medicine, Patient Ventilators, Endoscopy, ICU, CCU As our Medical Sales Representative, you will: · Take ownership for the achievement of your annual territory sales growth plan. · Drive both the strategy and execution, while mapping out the mechanics of each hospital & customer, to target high-margin business. · Balance 50% new business development and 50% account development. · Maintain commercial, clinical, and technical relationships with existing KOLs and customers, whilst developing sales with the introduction of new customers and products. · Lead from the front in the sales process, including dual-customer visits and managing the tendering process. · Organise and run regular workshops, seminars, exhibitions, and mailings, to develop sales opportunities. · Travel extensively , both in the UK (and occasionally), abroad. PERSON SPECIFICATION: Territory Sales Manager, Medical Devices Sales Representative - Critical Care, Intensive Care, Respiratory Medicine, Patient Ventilators, Endoscopy, ICU, CCU You will have: · A proven track record as a Medical Sales Representative, within technical consumables, capital equipment (preferably both), gained within a Critical Care environment. · Ability to articulate key product and market messaging to increasing customer compliance with our technology and driving care strategies to improve patient outcomes. · Ability to build strong relationships fast. · A results-driven approach, with a creative way of developing solutions. · Ability to communicate effectively with all key stakeholders within ICU, Emergency room and wards. · Team-player style, who can work independently and be an entrepreneurial thinker. · Competency with advanced Microsoft: Word, Excel, PowerPoint and Outlook · A full and clean driving license OUR COMPANY: We are a high-quality international branded manufacturer of ground-breaking and highly innovative Medtech product solutions. These solutions have been credited as genuine game-changers within the medical devices and equipment market. Our R&D is constantly driving forward, creating new products which are world-class and cutting edge. The results have led to us winning numerous industry awards. As technology leaders within respiratory medicine, our product range is both established and growing year annually. We are constantly developing our customer channels through targeting new products and winning new clients. Our values include strong ethics, coupled with an emphasis on customer delight. This has resulted in the highest levels of clinical engagement. Our results speak for themselves: world-class manufacturing, premium branding, very high staff retention and fantastic camaraderie! It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Medical Sales Representative, Territory Manager, Medical Sales Executive - Critical Care, Intensive Care, Respiratory Medicine, Patient Ventilators, Endoscopy, Anaesthesia, Patient Monitoring, Cardiology, Ventilators, Infusion, CCU, ICU INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JK18543, Wallace Hind Selection

Laser Cutting SupervisorLocation: NottinghamSalary: £34,000 - £36,000Hours: Monday to Friday | 6:00am - 2:00pm (Day Shift)Auxo Talent is proud to be recruiting on behalf of a well-established engineering and manufacturing business for an experienced Laser Cutting Supervisor . This is an excellent opportunity for a hands-on leader with strong laser cutting experience to take ownership of a busy production department, leading a team while remaining actively involved in day-to-day manufacturing operations.If you're passionate about quality, safety, continuous improvement, and getting the best from your team, we'd love to hear from you.The RoleAs the Laser Cutting Supervisor, you'll oversee the daily operation of the laser cutting department, ensuring production targets are achieved safely, efficiently, and to the highest quality standards. You'll lead by example, supporting your team while working closely with production, planning, quality, and engineering teams to ensure smooth workflow and operational excellence.Key ResponsibilitiesSupervise the day-to-day running of the laser cutting department.Lead, motivate, and develop a team of Laser Cutting Operators and production staff.Allocate workloads and ensure production schedules are delivered safely and on time.Set up and operate laser cutting machinery as required, providing hands-on support to the team.Carry out first-off inspections and ensure components meet engineering drawings and customer specifications.Monitor quality throughout production and implement corrective actions where necessary.Identify production issues, minimise downtime, and drive improvements in efficiency.Work closely with Production Planning, Programming, Quality, and Operations teams to maintain workflow.Train, mentor, and support team members to maximise performance and development.Conduct return-to-work meetings, probation reviews, and day-to-day people management activities.Maintain excellent housekeeping standards and promote a strong Health & Safety culture.Liaise with the maintenance team regarding machinery faults and planned maintenance.Support recruitment, onboarding, and induction of new employees.Champion continuous improvement initiatives across the department.About YouTo be successful in this role, you'll have:Previous supervisory experience within a laser cutting or manufacturing environment.Extensive hands-on experience operating industrial laser cutting machinery.Strong knowledge of engineering drawings and sheet metal fabrication.Excellent leadership, organisational, and people management skills.The ability to prioritise workloads and meet production deadlines.A proactive approach to problem-solving and continuous improvement.Strong communication skills and the ability to build positive relationships across departments.Good IT skills and experience working with manufacturing systems.Desirable ExperienceExperience with Bystronic, Trumpf, Amada, or similar laser cutting equipment.Knowledge of ERP/MRP systems.Lean Manufacturing or Continuous Improvement experience.Forklift licence.First Aid qualification.What's on Offer?£34,000 - £36,000Permanent, full-time position.Monday to Friday day shifts (6:00am-2:00pm) with an excellent work-life balance.Company pension.On-site parking.Ongoing training and career development opportunities.A supportive and growing manufacturing business where you can make a real impact.The opportunity to lead a skilled team while remaining hands-on in a modern production environment.If you're an experienced Laser Cutting Supervisor looking to take the next step in your career, apply today or contact Auxo Talent for a confidential discussion.TPBN1_UKTJ

Experienced and professional Grounds Maintenance Operative required to work with leading facilities management services company in Nottingham.. My client required and experienced Grounds Maintenance Operator to join their award winning maintenance division on an on going temporary contract. Are you looking to work with a prestigious and well known employer? Please see below details. Location: Nottingham Pay: £15.37 per hour (Paid weekly via umbrella) Hours: 42 Hours Start Date: ASAP Duration: likely to be multiple months Key Responsibilities Maintaining school outdoor areas to a high standard Grass cutting and general grounds upkeep Operating equipment such as strimmers and other powered tools Marking out football pitches and running track lines Ensuring all areas are tidy, safe, and presentable at all times Travelling between various school locations across the Newark areaRequirements A full UK driving licence (essential) Enhanced DBS check (required due to working in schools) Previous grounds maintenance or similar experience desirable Ability to safely operate landscaping equipment and power tools Strong work ethic and attention to detail Ability to work independently and as part of a teamRequirements PA1 & PA6 spraying licence (ideal but not essential) Licence to drive a trailer If you are interested, please apply for this role or email and I will be in touch! INDPS

We are looking for a talented Metal Fabricator/Welder/Fitter to join our expanding team based in our workshop at Nottingham and on customer sites in the UK. We require a highly skilled, self-motivated individual that possesses a high level of quality & ownership skills. The successful candidate must be competent with the use of all metal working machinery along with an excellent eye for detail.Role & ResponsibilitiesMain purpose :Responsible for building high quality metal componentsResponsibilitiesYour role may include but not limited to:Building high quality metal componentsReading & interpreting engineering drawingsReacting to customer breakdowns in-house and onsiteMeasuring, marking cutting & bendingSet up metal work machinery including presses, cutters, brakes, shears & rollersGrinding & finishing to a high specificationCarrying out all QA checks prior to despatchWorking within Company H&S proceduresAny ad-hoc responsibilitiesEssentialFlexibilityAble to work as part of a teamDemonstrate an excellent H&S ethic and have knowledge & experience of conforming to Safety RegulationsDemonstrate high level of detailDesirableQualifications in manual handlingQualification in Mechanical EngineeringAdvanced welding qualificationsAdvanced knowledge of engineering & manufacturing proceduresBenefits:Salary Sacrifice SchemesCompany eventsCompany pension & Life AssuranceSchedule:8 hour shiftMonday to FridayOvertime availableExperience:FabricatingWeldingFittingTPBN1_UKTJ

Fully Remote | Flexible Hours | Fee-Split Model Join a Forward-Thinking Boutique Firm Are you an experienced Residential Conveyancer looking for more than just another conveyancing role? Do you find that your clients and referrers are choosing you, not necessarily the firm you work for? If that sounds familiar, it might be time to consider a consultancy model – and start earning up to 75% of the fees you generate. Many lawyers have already made the move to consultancy, and it’s transforming the way they work, and the money they earn. At FDR, we specialise in helping conveyancers make that transition with confidence. Choosing the right firm can feel daunting – even isolating – but that’s where we come in. We're a small, forward-thinking boutique firm that offers more than just a platform. Here, you’re not just another number. Your voice matters, your work is appreciated, and your growth is genuinely supported. We’re a close-knit, modern legal practice giving experienced conveyancers the chance to take full control of their careers – with the very best technology to back you up. You’ll have direct access to senior leadership, streamlined systems, and the freedom to work how and when it suits you. Why Join Us? • Personal Support, Not Just a Platform, • We don’t leave you to figure things out alone. You’ll get real support to grow your business – with marketing help, mentoring, and a community of like-minded consultants who share insights and success., • Work on Your Terms, • Remote working, flexible hours, and total autonomy over your caseload. It’s your practice, built your way – under a clear, fair fee-split model., • Big Tech, Small Firm Feel, • We’ve invested in Salesforce – a game-changer in legal tech and rarely used by firms of any size. Thanks to the backing of our parent company, the AIIC Group, we have access to cutting-edge systems that mean fewer manual tasks, significant time savings, and a smoother experience for you and your clients., • You’re Heard and Valued, • In our compact team, you’ll have a direct line to leadership (including the CEO) and the ability to help shape how the firm evolves. We listen, and we act on what matters to you., • Full Support, Without the Red Tape, • Benefit from the financial security, compliance guidance, and admin support that comes from being part of the AIIC Group – without sacrificing your independence or flexibility. What We’re Looking For: • A qualified solicitor, licensed conveyancer, or legal executive with experience in residential property, • Confident in managing your own caseload from instruction to completion, • Tech-savvy and excited by smarter, more efficient ways of working, • Self-motivated and ready to grow your own client base with full backing, • Looking for true flexibility, with the support of a professional and collaborative team Ready to build a career on your terms – with the tools, support, and autonomy to thrive? We’d love to hear from you. Contact us today for a confidential chat with one of our Recruitment Executives. P.S. Our Legal Consultancy Programme does not require a set number of years PQE, however you need to be practising and legally qualified in England and Wales in Property law, and able to generate your own instructions. Contact us now to see if you qualify.

Grafana Labs, the company behind the open observability cloud, is founded on the principles of open source, open standards, open ecosystems, and open culture. Grafana Cloud, our fully managed observability platform, is flexible and built for scale. With Grafana Cloud's actually useful AI, organizations can see, understand, and act on all their disparate data to move at the speed of their ambitions. Today, more than 35 million users and 7,000+ customers – including Anthropic, Bloomberg, NVIDIA, Microsoft, and Salesforce – trust Grafana Labs to ensure reliability of their applications and systems, resolve incidents quickly, and optimize their telemetry to reduce noise and cost. We are a 100% remote company with 1,600+ team members across 40+ countries, and we’re backed by leading investors including Lightspeed Venture Partners, Sequoia Capital, GIC, Coatue, J.P. Morgan, CapitalG, and Lead Edge Capital. Learn more at and follow us on and _. We’re scaling fast and staying true to what makes us different: an open-source legacy, a global collaborative culture, and a passion for meaningful work. Our team thrives in an innovation-driven environment where transparency, autonomy, and trust fuel everything we do. You may not meet every requirement, and that’s okay. If this role excites you, we’d love you to raise your hand for what could be a truly career-defining opportunity. Staff Software Engineer – Identity and Access, Identity Squads This role is available for candidates located in the UK, Germany, Spain, Ireland and Sweden. The Opportunity: Every day, millions of users rely on Grafana to monitor the health and performance of their critical systems, from software applications to factories and even space shuttles. Our mission is two-fold: to provide a seamless and effortless sign-in experience for all users, and to ensure administrators have complete peace of mind, knowing that every user has secure access to precisely the data and functionality they need. The Identity and Access team at Grafana manages all aspects of authentication and authorization, working across both our open-source and proprietary codebases. The Identity squad, within the team, owns the authentication layer — the protocols and flows that determine how every Grafana user proves who they are. We actively implement cutting-edge authentication protocols such as MCP OAuth (OAuth 2.1), OIDC, SAML, LDAP, and SCIM, rather than relying on off-the-shelf components. We are completely redesigning Grafana’s authentication at the edge — a rare opportunity to shape the technical direction of authentication infrastructure at scale, with a direct impact on millions of users every day. Our code paths sit in the critical hot paths across Grafana’s services, making every millisecond of performance essential. As a Staff Engineer, you will be central to defining how we evolve these systems. What You’ll Be Doing: As a Staff Engineer on the Identity squad, you will set the technical direction for our authentication systems and lead the most complex initiatives from conception through delivery. You will collaborate closely with engineering leadership, product management, and cross-functional partners to define how Grafana authenticates millions of users every day. • Approximately 55% of your time will be dedicated to backend development (Golang), 25% to technical leadership and cross-team collaboration, and 20% to operations and reliability., • Define and own the technical architecture for the Identity squad’s authentication systems, including our edge authentication redesign., • Lead the design and implementation of large-scale, multi-quarter initiatives in the critical path of user interaction, spanning multiple services and teams., • Mentor and develop senior engineers, providing technical guidance, design feedback, and support for their professional growth., • Serve as a technical authority for identity protocols at Grafana, driving alignment on how we implement and evolve OAuth, OIDC, SAML, LDAP, and SCIM across the organization., • Drive cross-team technical alignment on authentication standards, patterns, and best practices across Grafana’s engineering organization., • Represent Grafana Labs at meetups and conferences, and contribute to the broader identity and authentication community. As we are remote-first and our engineering organization is largely remote, we provide guidance and meet regularly using video calls, so an independent attitude and strong communication skills are essential. What Makes You a Great Fit: • Deep, proven expertise in distributed systems engineering with Go, with a track record of owning and delivering large-scale production systems end-to-end., • Demonstrated ability to define technical direction and drive architectural decisions independently, with impact that extends beyond your immediate team., • Extensive experience building and operating low-latency, high-throughput services in distributed, multi-tenant environments., • Proven track record of leading and delivering complex, multi-quarter initiatives that span multiple teams or systems., • Ability to mentor and develop senior engineers, elevating the technical quality and capabilities of those around you., • Strong understanding of SLOs, SLIs, error budgets, and how to design systems that balance reliability, security, and product velocity., • Excellent written and verbal communication skills in English; able to clearly convey complex technical decisions to diverse audiences, including engineering leadership and non-technical stakeholders., • Expert-level understanding of modern identity standards and threat models (OAuth 2.x / 2.1, OIDC, SAML), and how to implement them securely at scale. Bonus Points For: • Familiarity with Kubernetes., • TypeScript/React experience., • Experience working with OpenFGA and KiFederate IDP., • Experience working in security critical environments., • Experience contributing to or maintaining Open Source projects., • Familiarity with observability tooling (e.g., Grafana, Prometheus, OpenTelemetry). Compensation & Rewards: In the UK, the Base compensation range for this role is £100,000 - £124,000. Actual compensation may vary based on level, experience, and skillset as assessed in the interview process. Benefits include equity, bonus (if applicable) and other benefits listed _. *Compensation ranges are country specific. If you are applying for this role from a different location than listed above, your recruiter will discuss your specific market’s defined pay range & benefits at the beginning of the process. Why You’ll Thrive at Grafana Labs: • 100% Remote, Global Culture - As a remote-only company, we bring together talent from around the world, united by a culture of collaboration and shared purpose., • Scaling Organization – Tackle meaningful work in a high-growth, ever-evolving environment., • Transparent Communication – Expect open decision-making and regular company-wide updates., • Innovation-Driven – Autonomy and support to ship great work and try new things., • Open Source Roots – Built on community-driven values that shape how we work., • Empowered Teams – High trust, low ego culture that values outcomes over optics., • Career Growth Pathways – Defined opportunities to grow and develop your career., • Approachable Leadership – Transparent execs who are involved, visible, and human., • Passionate People – Join a team of smart, supportive folks who care deeply about what they do., • In-Person onboarding - We want you to thrive from day 1 with your fellow new ‘Grafanistas’ to learn all about what we do and how we do it., • Balance is Key - We operate a global annual leave policy of 30 days per annum. 3 days of your annual leave entitlement are reserved for Grafana Shutdown Days to allow the team to really disconnect. *We will comply with local legislation where applicable. Equal Opportunity Employer: Grafana Labs is an equal opportunities employer. We welcome applications from everyone regardless of race, colour, nationality, origin, caste, sex, gender reassignment identity or expression, sexual orientation, age, religion or belief, disability, veteran status, genetic information, pregnancy, maternity, marital, family or carer status, or any other characteristic which is protected by local law. We believe that equality and diversity build a strong organisation, and we work hard to ensure that is the foundation of our organisation as we grow. Grafana Labs may utilize AI tools in its recruitment process to assist in matching information provided in CVs to job postings. The recruitment team will continue to review inbound CVs manually to identify alignment with current openings. #LI-Remote For information about how your personal data is used once you’ve applied to a job, check out our .

Before the lights go out… before the big move is called… There’s data. There’s technology. There’s AI. As a Full Stack AI Engineer, you will be a core part of our product and AI engineering team as we build the future of sports tech. You won’t just write code - you’ll help redefine what’s possible in professional sports. You're joining at a pivotal moment: when AI is breaking into every level of sport and redefining the competitive edge. Your work will directly influence how athletes perform, how decisions are made, and how fans and teams connect with data. If you’re passionate about innovation with real-world impact, and excited by the intersection of technology, and high-performance environments - this is your opportunity to own outcomes, move fast, and thrive when the stakes are high, by turning AI from concept to scoreboard. • Drive innovation by leading the development of AI-based systems that will redefine what’s possible in sports, • Design, develop, and maintain scalable fullstack web applications integrating AI/ML models, • Collaborate on building PACETEQ’s unified Sports Data Platform, • Implement backend services, RESTful APIs, and frontend UIs in modern JavaScript frameworks (React, or similar), • Integrate ML models into production systems, • Help define software architecture that supports real-time decision intelligence for sports, • Contribute to DevOps and ML Ops pipelines., • Learn and grow through cross-functional projects with a crew of embedded engineers, application developers, and sports experts, • Operate with speed and precision in a performance-driven environment, • Report directly to our CTO and work shoulder-to-shoulder with the CEO when the stakes are high, • 3–6 years experience in fullstack engineering with exposure to AI/ML, • Proficiency with JavaScript, React, and other web technologies, • Hands-on experience deploying machine learning models in a production environment, • Strong API design skills (REST / GraphQL), • Experience with containerization (Docker), cloud platforms (AWS), CI/CD, • Familiarity with AI tools/libraries (scikit-learn, PyTorch/TensorFlow, OpenCV, etc.), • High accountability and ownership: able to independently deliver full features, • Strong verbal + written communication in English, • Adaptable mindset — solving technical challenges in fast-moving environmentsAt PACETEQ, performance starts with people. We reward talent, celebrate collaboration, and create space for you to do your best work while enjoying the journey. Here’s what you can expect: Professional & Personal Development • Trainings, certifications & access to cutting-edge tech, • Career growth tracks in Engineering, Product, or Tech StrategyWork How You Perform Best, • Flexible working model: remote, hybrid, or on-site in Germany/UK, • No micromanagement – full trust, real accountability, • Setup support for your home office or remote gearMobility & Sustainability Benefits (Germany), • We pay for your Deutschlandticket, • Or: Subsidy for bike, e-scooter or leasing model, • Contributions to your bAV (betriebliche Altersvorsorge)Wellbeing & Everyday Life, • Fruit, Snacks and drinks stocked weekly, • Gym, fitness studio, and onsite restaurant (Germany HQ)Culture & Connection, • Regular team events, • Fun, high-trust atmosphere where people stay curious, humble, and braveJob Security & Respect, • We believe in long-term high performance, not hire & fire, • Join us with a secure, full-time, permanent contract, • A future-proof role in a growing international sports tech companyCompensation & Coverage, • Competitive salary based on experience, • 30 days paid vacation + bank holidaysWe will ask you to:, • Complete the questionnaire, • Send us your CV, • Send us your Cover LetterPACETEQ welcomes diverse backgrounds, viewpoints, and experiences. We value potential over perfection. If the role inspires you, apply - even if you don’t tick every box. _