Manufacturer jobs in , LondonCreate job alerts

Structural Steel Engineer (Progression to Technical Sales) \n £50,000 - £60,000 + Company Benefits + Training + Car Allowance + Hybrid \n Tottenham (Southeast Patch) \n Are you a Structural Steel Engineer or similar with experience within the structural steel industry looking for a varied, autonomous role with full sales training within a leading manufacturer, offering hybrid working, excellent earning pote... \n \n ZIPC1_UKTJ

Senior HVAC Engineer (Commercial Cooling & Heating Technologies) - west London, UK \n (CANDIDATES FOR THIS ROLE MUST BE ELIGIBLE TO WORK IN THE UK WITHOUT THE NEED FOR SPONSORSHIP AND MUST BE ABLE TO TRAVEL FREELY IN EU COUNTRIES WITHOUT ANY RESTRICTIONS.) \n A new vacancy for a Senior HVAC Engineer (Chillers & Heat Pumps) with European division of leading global manufacturer of high-efficiency heating an... \n \n ZIPC1_UKTJ

Senior Air-Conditioning Engineer - European Pre-Sales Support (VRF/VRV) - west London, UK (with option of hybrid working) \n A new vacancy for a Senior Air-Conditioning Engineer - European Pre-Sales Support (VRF/VRV) with European division of leading global manufacturer of high-efficiency heating & cooling products. Based at the company's offices in the west London / Middlesex area, the Senior Air-Con... \n \n ZIPC1_UKTJ

Motor Vehicle Technician - WoolwichFranchised Motor DealershipAre you a skilled Vehicle Technician with a passion for prestige and performance vehicles? We are looking for an experienced and qualified technician on behalf of our client, working with one of the most respected automotive brands in the industry.This is an excellent opportunity for a motivated individual who takes pride in delivering exceptional workmanship and customer service.Working HoursMonday to Friday: 8:00am - 5:00pmSaturday: 8:00am - 12:30pm (1 in 4 rota)Saturday shifts are paid as overtimeSalary & BenefitsCompetitive basic salary starting from £30,000 (depending on experience)On-target earnings of £50,000 to £60,000+Overtime opportunitiesCareer progression within a prestige automotive environmentKey ResponsibilitiesCarry out servicing, maintenance, and repairs to manufacturer standardsDiagnose and rectify mechanical and electrical faultsComplete vehicle health checks and identify additional work requiredEnsure all work is completed efficiently and accuratelyMaintain high standards of workshop safety and housekeepingDeliver excellent quality workmanship at all timesEssential RequirementsIMI Level 3 Motor Vehicle Technician qualification (or equivalent)Proven experience in a professional automotive service or repair environmentFull UK driving licence held for a minimum of 1 year with no significant endorsementsEligibility to work in the UKIf you are an experienced Vehicle Technician looking to take the next step in your career with a prestige automotive employer, we would love to hear from you. Apply now with your CV and join a team where your skills and expertise are truly valued.Who are you applying to?The Solution Automotive Recruitment have been placing candidates into the UK Motor Trade since 1999. We have a fantastic relationship with all our clients and candidates across the country, many very long standing relationships. If you are skilled and experienced Automotive candidate, we want to hear from you and rest assured, you'll be dealing with a person, not just a consultant!Unfortunately due to the volume of applications we get, we can only respond to the candidates who match the criteria set for this vacancy. We will retain your CV on our database and make contact as and when suitable vacancies arise. We will NEVER send your CV anywhere without your permissionTPBN1_UKTJ

Senior Technical Pre-Sales Engineer/EUROPE (VRF Air-Conditioning) - west London, UK (with option of hybrid working) \n A new vacancy for a Senior Technical Pre-Sales Engineer (VRF Air-Conditioning) with European division of leading global manufacturer of high-efficiency heating & cooling products. Based at the company's offices in the west London / Middlesex area, the Senior Technical Pre-Sales Engine... \n \n ZIPC1_UKTJ

Generator Engineer (Door-to-Door / Local Patch)\n \n £38,477 + Door-to-Door Pay + Overtime + Company Van + On-Call Allowance + Training + Progression + Company Benefits \n Hackney - London Patch \n Are you a Generator Engineer looking to join a leading power generation company that offers unlimited overtime, excellent career progression, manufacturer training, and door-to-door pay while covering a local London ... \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Engineering Stores Coordinator \n \n Are you interested in joining a leading manufacturer in the food industry, dedicated to quality and innovation. Who prioritise safety, quality, and efficiency in all our operations. You will be joining a business with a fantastic culture and a supportive team network. \n \n As the Engineering Stores Coordinator, you will play a crucial role in ensuring maximum equipment av... \n \n ZIPC1_UKTJ

Fire Alarm Service EngineerLocation: South London & Surrounding AreasSalary: £38,000£40,000 per annum + Company Vehicle + Fuel Card + TrainingJob Type: Full-Time, PermanentThe OpportunityWe are looking for an experienced Fire Alarm Service Engineer to join our growing team, covering South London and the surrounding areas.This role involves servicing, maintenance, fault finding, compliance inspections and small remedial works on a wide range of commercial and residential fire alarm systems. Experience with AOV and smoke control systems would be a distinct advantage.If you have a strong technical background, excellent diagnostic skills and are looking to join a company that values training, progression and quality workmanship, we'd like to hear from you.Key ResponsibilitiesService, inspect and maintain fire alarm systems in accordance with BS 5839.Diagnose faults and carry out effective repairs.Complete small works, remedial works and system modifications.Replace, commission and test conventional, addressable and wireless fire alarm devices.Upload, download and configure fire alarm control panels.Carry out fire alarm condition surveys and identify opportunities for system improvements or upgrades.Test and verify Cause & Effect (C&E) programming.Complete maintenance reports, compliance documentation and service records accurately.Ensure all work is completed safely and in accordance with current industry standards and company procedures.Essential RequirementsMinimum of 2 years' experience servicing and maintaining fire alarm systems.Strong fault-finding and diagnostic skills.Experience working on commercial fire alarm systems.Good working knowledge of BS 5839.Ability to identify system defects, non-compliances and recommend appropriate remedial works.Full UK driving licence.Fire Alarm Systems ExperienceExperience working with one or more of the following manufacturers is essential:AdvancedMorleyKentecEDAHaesC-TECExperience with open protocol fire alarm systems is highly desirable.Wireless Fire Alarm ExperienceExperience with any of the following wireless systems would be advantageous:HyfireEMSZerioAOV & Smoke Control (Desirable)Knowledge or experience of AOV and smoke control systems is desirable, including:TealActuluxWindowMasterSE ControlsEasi-VentApplicants with experience of AOV operation, Cause & Effect programming, compliance testing and fault diagnosis will be at an advantage.Desirable QualificationsFIA qualifications.Manufacturer training certifications.Experience with Emergency Lighting systems.Experience servicing Fire Extinguishers.Experience with Disabled Refuge Systems.Salary & Benefits£38,000£40,000 basic salary.Company vehicle and fuel card.Company pension scheme.Paid overtime opportunities.Ongoing manufacturer and FIA training.Excellent career progression opportunities.23 days annual leave plus bank holidays.TPBN1_UKTJ

FIBROUS PLASTERER / PARK ROYAL (NW10) \n We are recruiting an experienced Fibrous Plasterer for a well-established manufacturer and installer of decorative plaster products based in Park Royal (NW10). This role involves the manufacture, installation and restoration of high-quality decorative plasterwork for residential and commercial projects. \n This is an ongoing opportunity offering consistent weekday ... \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Refrigeration EngineerLondon & Surrounding Areas£50,000 - £60,000 + Excellent BenefitsAn exciting opportunity has become available for an experienced Refrigeration Engineer to join a well-established and privately owned HVAC specialist renowned for its positive company culture, supportive management team, and excellent staff retention.With continued growth across its service portfolio, the business is looking to add a skilled engineer to its team. This role offers the chance to work within a progressive and employee-focused organisation where your contribution is genuinely valued, alongside excellent opportunities for ongoing training and career development.As a Refrigeration Engineer, you will be responsible for servicing, maintaining, and repairing a wide range of commercial refrigeration systems across a varied portfolio of commercial, critical, data centre, and banking environments throughout London and the South East.Key Responsibilities Carry out planned preventative maintenance (PPM) and reactive repair works on commercial refrigeration equipment.Diagnose faults, troubleshoot issues, and complete repairs efficiently to minimise downtime.Service and maintain a variety of refrigeration systems including:Cold RoomsWalk-In FreezersChillersDisplay Refrigeration UnitsCommercial Refrigeration PlantEnsure all works are completed to industry standards and in line with F-Gas regulations.Work independently across multiple client sites while maintaining high levels of customer service and professionalism.Complete service reports and maintenance documentation accurately and efficiently.Requirements Proven experience working on commercial refrigeration systems.Valid F-Gas Certification (essential).NVQ Level 2 or equivalent qualification in Refrigeration & Air Conditioning (preferred).Strong fault-finding and diagnostic abilities.Ability to work independently and manage workloads effectively.Full UK Driving Licence.Package & Benefits Basic Salary: £50,000 - £60,000Company vehicle and fuel card26 days annual leave plus bank holidaysPaid overtime opportunitiesNon-sickness attendance bonusesHealth cash planRegular company social eventsOngoing manufacturer and technical trainingCareer progression opportunities within a growing and successful businessSupportive and friendly working environment with an excellent team culturePosted by Lee HamiltonTPBN1_UKTJ

When faced with an impasse, do you look to bridge the gap? Our Bridges and Structures Team does too. From local bridge rehabilitations that support our communities to iconic bridge designs that define a region, our opportunities will connect you to your career goals.A career in transportation is more than bridges, roads, and rail. As we plan, design, and manage projects that move people and goods from Point A to Point B, we create connections that transform our communities. Every airport, road, bridge, port, or transit project is an opportunity to make communities safer, cleaner, and more resilient. Together, we’re making an impact around the world.If you’re looking for a career that moves, join our team of professionals who are passionate about the future of transportation.Your OpportunityAn opportunity exists for an intermediate to senior Bridge Engineer to become part of our dynamic Transportation Engineering group in Alberta. This position will be full-time in-office or hybrid based in our Edmonton office Stantec’s Transportation Team has a strong local presence but also participates in some of Stantec’s largest and most complex transportation projects. These projects encompass the entire life of the transportation structure – from feasibility studies through detailed design and construction oversight. Are you excited by and passionate about this interesting and challenging field of engineering?Your Key ResponsibilitiesProject management and/or design management of bridges, culverts, retaining walls and foundation engineering assignments.Managing change in scope, schedule, risks and costs against the project baseline.Interaction with project controls and associated reporting.Regularly interface with the client regarding project status updates and expectations.Account and stakeholder management maximizing business opportunities within client accounts.Analysis, design, preparation of tender packages, visual inspections, report preparation, cost estimating, construction engineering services.Proposal preparation and assisting to develop client relations.Development of structural rehabilitation, strengthening and replacement strategies.Perform basic and more advanced calculations and structural analysis/modeling using company standard software and/or proprietary manufacturer software.Preparing contract drawings, design details, specifications, cost estimates, and reports for various bridge types and other transportation structures.Undertaking bridge, culvert and other structural inspections to assess condition.Mentoring junior bridge engineers and bridge technologists.Regular collaboration with colleagues in our multi-disciplined design office.Coordination with sub-consultants.Construction administration and resident engineering.Your Capabilities and CredentialsDemonstrated ability to organize, coordinate, and project manage quality, budget, schedule, and technical deliverables for bridge projects at all phases of the project life cycle.Strong client management skills.Proven understanding of projects controls systems and cost control practices.Advanced understanding of structural design and analysis concepts and methods.Working knowledge of relevant bridge design codes, particularly CHBDC.Familiarity with the Alberta Transportation bridge design criteria, construction specifications, inspection and construction administration manuals, and standard drawings.Experience with structural modelling and design software such as SAP2000, CSiBridge, or equivalent.Ability to create and interpret sketches, drawings, and other documentation associated with a typical variety of structures.Ability to participate and collaborate in project team setting, to engage in creative and critical thought, and to effectively communicate concepts and ideas to others.Strong written and verbal communication skills.Enthusiastic attitude with interest in skills development and continual improvement.Ability to work independently and in a team environment.Proficient in Microsoft (MS) Office Suite.Valid Class 5 Alberta Driver’s License.Education and ExperienceBachelor’s degree in civil engineering focusing on structural engineering, with preference for individuals with a Master’s degree.Licensed Professional Engineer (P.Eng.).Minimum of 7 years of bridge-related work experience.Position will primarily work in an office setting; may require some field work. This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice.About StantecStantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what’s previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what’s possible.#BSJPay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Please note, the final agreed upon compensation is based on individual education, qualifications, experience, and work location. At Stantec certain roles are bonus eligible. Actual compensation for part-time roles will be pro-rated based on the agreed number of working hours per week.Benefits Summary: Regular full-time and part-time employees (working at least 20 hours per week) will have access to health, dental, and vision plans, a wellness program, health care spending account, wellness spending account, group registered retirement savings plan, employee stock purchase program, group tax-free savings account, life and accidental death & dismemberment (AD&D) insurance, short-term/long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage, and paid time off.Temporary/casual employees will have access to group registered retirement savings plan, employee stock purchase program, and group tax-free savings account.The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements.Primary Location: Canada | AB | EdmontonOrganization: BC-1136 Transpt-CA AlbertaEmployee Status: RegularBusiness Justification: ReplacementTravel: YesSchedule: Full timeJob Posting: 17/07/2026 05:07:55Req ID: 1006804

An unusual role offering 'the best of both worlds' combining both being a Workshop Engineer 50% of your time and a Field Service Engineer for the other 50%, for a packaging machinery manufacturer supplying the food industry. BASIC SALARY: up to £45,000 BENEFITS:· Overtime to earn £5,000 to £7,000 · Commission & Bonus on aftersales to earn up to £2,000 · Company Car LOCATION: Home based but you MUST be commutable to the companies UK office near Heathrow airport, as your time as a Workshop Engineer, will be office based. All other time will be field based, covering the UK. COMMUTABLE LOCATIONS: Slough, Uxbridge, Watford, Maidenhead, Hemel Hempstead, Hayes, Amersham JOB DESCRIPTION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food This is a hybrid Workshop Engineer / Field Service Engineer role, with a 50 / 50 split of your time. As a Workshop Engineer, you will be working on machines pre-installation in the workshop at the companies office and as a Field Service Engineer you will be required to work on client sites and will be responsible for installation, commissioning, repair and refurbishment of machines on sites across the whole UK. Overtime is paid door to door and you can expect to travel and stay away from home 1 to 2 nights per week and to be available to work weekends twice a month if required. PERSON SPECIFICATION: Workshop Engineer, Field Service Engineer, Factory Maintenance Engineer - packaging machinery, food · You will be an experienced Workshop Engineer, or a Factory Maintenance Engineer who is now looking for hybrid workshop and field service role. · The company will also consider an experienced Field Service Engineer who would like a better work life balance, spending less time away from home. · Any previous experience of working on packaging machinery and / or of working within the food industry would be advantageous. · You MUST be a qualified Multi Skilled Electrical / Electronic Engineer, having completed at least a full apprenticeship. THE COMPANY: A very well established and market leading manufacturer of packaging machinery supplied to the food industry. INTERESTED? Please click apply. You will receive an acknowledgment of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18598, Wallace Hind Selection

Technical Director (Theatre Flooring Projects / Global)£85,000 - £100,000 + Bonus (OTE £105,000 - £120,000) + Progression + International Travel + Company Vehicle + Company BenefitsClapham- Hybrid / International TravelAre you a senior technical leader from the Theatre Flooring industry looking to take ownership of global technical operations, being the go-to technical specialist on landmark international projects while driving product innovation and technical excellence?This globally recognised manufacturer specialises in professional performance flooring and staging systems for the dance, theatre, entertainment, education and live events industries. For over 45 years, the business has supplied world-renowned venues and organisations across more than 100 countries, earning a reputation for technical excellence, innovation and quality while continuing to expand internationally.In this role, you will lead the Group's global technical function, providing strategic and operational leadership across engineering, product development, manufacturing and technical support for theatre projects. Working closely with international sales, project management and manufacturing teams, you will oversee new product development, support major global projects, develop technical standards and ensure the company's products continue to set the benchmark for quality, performance and innovation.This role would suit a senior technical leader from a theatre flooring background looking to take ownership of a global technical function within a market-leading manufacturer, working on prestigious international projects while influencing future product innovation and business growth.The Role:Leading the Group's global technical function across engineering, product development and technical supportProviding expert technical guidance throughout the sales and project lifecycleDeveloping technical specifications, engineering drawings and installation methodologiesSupporting major international projects with technical solutions, site inspections and problem resolutionLeading new product development and continuous improvement initiativesWorking closely with manufacturing to improve product quality, performance and production efficiencySupporting sales teams with technical presentations, quotations and tender documentationMentoring National Technical Managers and delivering technical training across the GroupInternational leadership role with regular overseas travelThe Person:Technical Director, Head of Technical, Senior Technical Manager or similarExtensive Theatre flooring / carpentry experienceStrong CAD and technical drawing experienceProven experience leading technical teams, product development and engineering projectsWilling to travel internationallyReference: BBBH25974ETechnical, Director, Head of, Manager, Commercial, Theatre, Flooring, Performance Stage, Engineering, Manufacturing, International, Carpentry, London, Greater London, Hybrid, Global TravelIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the Terms & Conditions, Privacy Policy and Disclaimers available on our website.TPBN1_UKTJ

Field Service Engineer (Diesel & Gas Engines) \n £38,477 + Door-to-Door Pay + Overtime + Company Van + On-Call Allowance + Training + Progression + Company Benefits \n Hounslow - M25 Patch \n Are you a Field Service Engineer with a background working on diesel or gas engines looking to join a market-leading power generation specialist, where you'll receive door-to-door pay, industry-leading training, and work on critical energy infrastructure around the M25? \n This is an opportunity to join a leading international power generation specialist established in 1985. With over 200 employees, the business designs, manufactures, installs and maintains CHP, gas engine, biogas, landfill gas and battery storage systems that help industrial and public sector clients reduce emissions and improve energy efficiency. \n In this role, you will carry out pre planned and reactive maintenance on gas and diesel engine across customer sites within the M25. You'll diagnose mechanical and electrical faults, perform both local and remote fault finding, complete service reports and work closely with customers to maximise equipment availability and first-time fix rates. \n This role would suit a Field Service Engineer with experience on diesel engines, gas engines, CHP, generators or similar equipment, looking to join a well-established business offering excellent training, overtime and long-term career progression. \n The Role: \n\n • Carry out planned and reactive maintenance on gas and diesel engine installations\n, • Diagnose and repair mechanical and electrical faults using local and remote diagnostics\n, • Service engines and ancillary equipment in line with manufacturer schedules\n, • Complete service reports, timesheets and maintenance documentation\n, • Liaise with customers and internal teams to maximise equipment uptime\n\n The Person: \n\n • Experience servicing diesel engines, gas engines or similar\n, • Mechanical/Electrical fault-finding skills\n, • Recognised engineering qualification (level 2 or above)\n, • Full UK Driving Licence\n, • Happy to participate in an on-call rota\n\n Reference: BBBH25467 \n Field Service, Engineer, Generator, Gas, Engines, Diesel MAN, Generation, Biogas, Battery Storage, Mechanical Electrical Engineer, Maintenance, London, Watford, Hounslow, Field \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept our T&Cs, Privacy Policy and Disclaimers.

Field Service Engineer (X-Ray / Security Systems)£42,000 - £50,000 + OTE £60k + Overtime + On-Call Allowance + Company Vehicle + Training + Progression + International Travel + Company BenefitsLondon (Field Based)Are you a Field Service Engineer with an electrical or electro-mechanical background, looking to join a global leader in high security technology where you'll receive manufacturer training and have the opportunity to travel internationally?This is a fantastic opportunity to join a specialist engineering business delivering advanced security solutions to airports, seaports, government facilities, and critical infrastructure across the UK and overseas. The company offers excellent job security, ongoing investment in its engineers, and clear progression into senior technical and international roles.In this role, you'll install, service, maintain, and repair a range of sophisticated security systems including X-ray scanners, metal detectors, body scanners, access control, and CCTV systems. You'll travel nationwide to customer sites and receive ongoing comprehensive manufacturer training.The ideal candidate will have a background in field service, maintenance, or installation engineering with strong electrical or electronic fault-finding skills, looking to develop their skills and progress their career.The Role:Service, maintain, install, and repair advanced security screening equipmentFault find on X-ray systems, metal detectors, body scanners, CCTV, and access controlTravel nationwide to customer sites with occasional overnight staysParticipate in a 1-in-4 on-call rota with excellent overtime opportunitiesReceive ongoing manufacturer training with opportunities for international travelThe Person:Field Service Engineer or Maintenance Engineer backgroundElectrical, electro-mechanical, or IT hardware experienceHappy with UK-wide travel and on-call workFull UK driving licenceIf you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.Reference Number: BBBH26678Keywords: Field Service Engineer, Service Engineer, X-Ray Engineer, Security Engineer, Electronic Engineer, Electrical Engineer, Electro-Mechanical Engineer, CCTV Engineer, Access Control Engineer, Metal Detection, CT Scanner, EDS Systems, Security Systems, Airport Security, Critical Infrastructure, Preventative Maintenance, Fault Finding, South England Jobs, London, London JobsWe are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

Senior Air Conditioning Engineer \n Surrey & London \n £52,000 Basic + Company Vehicle + Fuel Card + Overtime + Career Progression \n Join One of the South East's Leading HVAC Specialists \n Are you an experienced Air Conditioning Engineer looking to join a company that genuinely values its engineers? \n Our client is an established HVAC specialist with over 40 years of success, delivering first-class installation, service, maintenance and repair solutions across London and the South East. They have built an outstanding reputation for technical excellence, long-term client relationships and, most importantly, investing in their engineers. \n This isn't just another engineering role-it's an opportunity to join a business where you'll be recognised for your skills, supported with ongoing manufacturer training and offered genuine career progression as the company continues to grow. \n The Role \n Working across a portfolio of predominantly commercial properties, with some prestigious high-end residential clients, you'll be responsible for the service, maintenance, fault finding and repair of a wide range of air conditioning systems. \n You'll be working on equipment including: \n\n • Daikin VRV & VRF Systems\n, • Mitsubishi Electric City Multi Systems\n, • Split Systems\n, • Multi-Split Systems\n, • Cassette Units\n, • Wall Mounted Systems\n, • DX Systems\n, • Close Control Units\n, • Heat Pump Systems\n, • Air Curtains\n, • Ventilation Equipment\n, • AHU Cooling Systems\n, • FCU Cooling Systems\n\n You'll diagnose faults, carry out planned preventative maintenance, complete reactive repairs and ensure equipment is operating safely and efficiently while delivering outstanding customer service. \n Essential Requirements: \n\n • F-Gas Category 1 Qualification\n, • NVQ Level 2 or Level 3 in Air Conditioning & Refrigeration (or equivalent)\n, • Proven experience servicing, maintaining and repairing commercial air conditioning systems\n, • Strong fault-finding and diagnostic skills\n, • Experience working on Daikin and Mitsubishi equipment\n, • Full UK Driving Licence\n, • Excellent communication and customer-facing skills\n\n Salary & Benefits \n\n • Up to £52,000 Basic Salary\n, • Company Vehicle\n, • Fuel Card\n, • Plenty of Overtime Available\n, • Ongoing Manufacturer Training\n, • Professional Development\n, • Genuine Career Progression\n, • Stable, Long-Term Career with an Established HVAC Specialist\n, • Weekly Support from a Highly Experienced Management Team\n\n If you're looking to work for a respected HVAC contractor that has been at the forefront of the industry for over 40 years and believes in developing its engineers rather than treating them like a number, we'd love to hear from you. \n For a confidential discussion or to apply, contact Russel Cleverley today.

Machine Technician / Setter £32,000 - £40,000 + Overtime + Bonus Scheme + Training + Progression + Company Benefits Enfield, commutable from: Harlow, Epping, Barnet, Potters Bar, St Albans, Hertford, Welwyn, Chigwell or Surrounding AreasAre you from a manufacturing, metal, or machining background and looking for a varied role with a well-established company that offers excellent overtime, on-the-job training, and long-term career progression?This is a fantastic opportunity to join a reputable manufacturer in a niche and rewarding position where you'll be supported with in-house training and clear routes for development.The company produces specialist products for clients across the globe. Due to continued success and expansion, they're looking to grow their close-knit engineering team at their Enfield site.In this hands-on role, you'll support a range of workshop operations, from machine setting to assisting in the production of metal finishes, before materials are supplied worldwide.This role would suit someone with experience in manufacturing, metalworking, or machining, who's eager to learn, develop their skills, and maximise earnings through overtime.The Role: \n\n • Support the manufacturing of metal products and materials\n, • Work for a global leader supplying the construction industry\n, • Monday to Friday with flexible start and finish times\n\n The Person: \n\n • Background in mechanical engineering\n, • Hands-on experience in manufacturing, metalwork, machining or similar\n, • Based within a commutable distance of Enfield\n\n Reference Number: BBHH277896To apply for this role or to be considered for further roles, please click "Apply Now" or contact Ben Fenton at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Job title: Aesthetics Technician Job location: South East LondonHourly pay rate: £22.28 PAYE / £28.99 Umbrella Shift Pattern: Sun - Thurs NightsHours per week: 50Duration: On-goingStart date: ASAPCompany Summary: A world renowned Rolling Stock vehicle service, maintenance and manufacturing company and is the number one provider of rail solutions in the world. This prestigious company is also the largest rolling stock manufacturer and provider in the UK and employs over 70,000 employees in 60 countries worldwide. Position Summary: As an Aesthetics Technician you will be working on a live rail depot as a member of a productive team. Your job role will be varied duties and task will include: Aesthetic condition examinations & rectification work. (Inspecting units for any visual defects relating to the Aesthetic condition of the interior & exterior of the fleet.) Bodyside repair of dents, scratches, scrapes & vegetation damage. Spray painting Interior & exterior train panels & components. Decal replacements. Lino flooring repairs. Internal & External Graffiti removal. Window film replacements. Damaged component replacement which require minimal mechanical skill. (non-safety related items like passenger seat change, broken cup-holders, cracked PIS lenses, window replacements, window latches etc.) Updating Maximo work orders & Reporting defects found with before & after rectification photos. Logging of work records on Maximo system - Tablet and Desktop based. Working at all berthing locations. Depot DP duties. Depot Driving duties.Person Profile/Experience:Experience in vehicle body repairs from prep to paint is required. The ideal person will: Have Mechanical experience Be reliable with timekeeping & willing to work overtime when required. Good communication. Basic Computer literacy. Full UK Drivers licenceContact InformationEmail: Phone: PLEASE NOTE ALL APPLICANTS MUST BE ABLE TO PASS A DRUGS AND ALCOHOL TEST BEFORE BEING OFFERED A POSITION. Please note due to the volume of applications, we can only commit to contact those candidates we deem suitable for the position. However, we may retain your details and contact you in the future should suitable positions arise. Please note the above job specification could be subject to change as agreed with our client.

We're looking for an Applications Engineer to become part of our experienced and supportive team. This is a varied role where no two days are the same. One day you could be proving out a brand-new machine for a customer, the next you'll be delivering operator training, developing machining strategies, or demonstrating the latest technology to customers and dealers. BASIC SALARY: £36,000 BENEFITS:· Bonus payments of up to £12k a year - as a result of the company carrying out services, machine sales and demonstrations · 25 days holiday plus bank holidays · Company car · Life insurance · Permanent Health insurance LOCATION: Watford COMMUTABLE LOCATIONS: Ruislip, Harrow, Barnet, Stanmore, Wembley, Luton, Hemel Hempstead, Potters Bar, Welwyn Garden City, Borehamwood, St Albans, Rickmansworth JOB DESCRIPTION: Applications Engineer - Industrial Machinery As our Applications Engineer, you'll play a key role in supporting customers throughout the entire lifecycle of their machines, ensuring they achieve the very best performance from their investment. Your responsibilities will include: · Visiting customer sites across the UK and Ireland to install, set up and prove our machines. · Delivering operator and engineer training for customers and dealer networks. · Developing machining methods, tooling strategies and CNC programs to solve customers' manufacturing challenges. · Supporting the sales team with technical demonstrations, time studies and machining solutions. · Carrying out machine demonstrations for customers and dealers, explaining machining processes in a clear and engaging way. · Installing machines in customer facilities and showrooms. · Testing and commissioning machines to ensure safe, reliable operation. · Providing telephone and on-site technical support for customers and dealers. · Learning new machine technologies and attending manufacturer training courses. · Supporting exhibitions, open days and customer events throughout the UK and Europe. PERSON SPECIFICATION: Applications Engineer - Industrial Machinery We're looking for an Applications Engineer who enjoys engineering just as much as they enjoy helping people. You'll ideally have: · Experience and a proven track record a similar position within CNC machinery or manufacturing. · Strong knowledge of metal cutting processes, tooling and machining methods. · The ability to develop complete manufacturing processes for finished components. · Excellent problem-solving skills and a practical engineering mindset. · Confidence communicating with customers, operators and colleagues. · The ability to work independently while also thriving as part of a collaborative engineering team. · A willingness to travel throughout the UK, Ireland and occasionally overseas. THE COMPANY: We are a world leading CNC machine tool manufacture supplying the latest CNC mill-turn technology to UK industry. We have been successfully serving UK manufacturing industry since 1974, famous also for our precision watches and electronics. Our products encompass our extensive range of high performance including sliding and fixed head CNC lathes. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client. REF: AM18602, Wallace Hind Selection

Job OverviewThis position is responsible for end-to-end ownership of supply from external manufacturing and co-packing partners outside Hershey’s internal manufacturing network, with a primary focus on Europe. The role will lead the external manufacturing and co-packing strategy across Europe to support Hershey’s growth ambitions, including Reese’s, Jolly Rancher, and other priority brands.The role serves as Hershey’s focal point for all activities related to external co-manufacturing and co-packing operations in Europe. This includes managing the established co-manufacturer and co-packer network, overseeing contracts, resolving operational issues related to payments and supply constraints, managing partner relationships, and identifying, evaluating, and onboarding new external manufacturing partners to support NPD and business development opportunities.The primary markets include Hershey’s Europe, MEA, and WTR regions. The role will also support product supply from external manufacturing locations to other regions, including APAC and Canada, by confirming supply feasibility, product costs, outbound logistics requirements, and related operational considerations.This role will work closely with Procurement on sourcing strategies for critical components such as chocolate paste, peanut crème, and packaging to support the external manufacturing and co-packing network. The role will also partner with Supply Chain teams to ensure supply adherence and lead discussions with external partners on supply and demand changes.Likewise, the role holder would also work with Stakeholder and support functions such as Finance, Legal , QRC, Responsible sourcing and Regulatory teams to ensure compliance for the co mfg and copack locations.This role reports to the Director, Supply Chain EMEA & WTR and is supported by a team overseeing key aspects of the external manufacturing network, including Account management (partner contracting, commercial management), supply planning, coordination and product delivery across multiple markets, and New Product delivery through existing and new manufacturing partners.AccountabilitiesLead Manufacturing Alliance Strategy & Network Management• Own Hershey's external manufacturing and co-packing network across Europe, MEA and WTR.• Develop and execute manufacturing alliance and sourcing strategies that support growth, supply continuity, and value creation.• Develop and maintain long-term sourcing and manufacturing strategies.Identify, evaluate and onboard new partners to strengthen Hershey's manufacturing capabilities and support innovation initiatives.Work cross-functionally with Marketing, Operations, Procurement and Commercial teams to establish and maintain long-term sourcing strategies that support growth plans.Manage Strategic Partnerships & Risk Mitigation• Develop and maintain strategic relationships with manufacturing and co-packing partners throughout the partnership lifecycle.• Manage contracts, commercial negotiations, renewals, and governance processes.• Lead resolution of complex partnership, supply, and operational issues while mitigating business and operational risks.• Support ESG functions in coordinating compliance and audit-related actions with external partners.Optimize Supply Chain, Logistics & Procurement Integration• Owner of packaging procurement activities with external co-manufacturing and co-packing suppliers, including source identification, pricing negotiations, supply assurance, and stakeholder management.• Partner with Procurement to establish and implement ingredient sourcing strategies aligned to growth plans.• Coordinate supply planning, raw material and packaging availability, and production scheduling with external manufacturing partners.• Issue resolution with Co mfg/co pack partners.Drive Continuous Improvement & Capability Development• Lead continuous improvement initiatives that enhance shared manufacturing capabilities and partner performance.• Support innovation, NPD, and business development opportunities across the alliance network.• Facilitate partner reviews, KPI tracking, compliance activities, and best-practice sharing to strengthen partnership effectiveness.Team DevelopmentMentors & develops team and in order to improve capabilities and drive decision points through insights & analysesBe accountable for coaching and developing direct reports.Be responsible and committed for the training and development plan for him/herself and his/her team. Skills/KnowledgeMinimum Education & RequirementsEducation:BS/BA in Engineering, Science, Industrial Engineering, Supply Chain, or equivalent experience.ExperiencePrefer 8+ years related experience in supply chain with exposure to co mfg/copack management

Company OverviewHumanscale is the premier designer and manufacturer of ergonomic products that improve health and comfort at work. We have a focus on sustainability with over 70% of our products currently certified as having a Net Positive impact on the environment. Our award-winning office products – seating, sit/stand desks, technology support and lighting – have led the industry in performance and simplicity for over 40 years. OverviewThe role involves carrying out repairs, maintenance, and installations for Humanscale office products across central London, while ensuring excellent service and professional interaction with clients. The ideal candidate will have strong problem-solving skills, flexibility, and a strong sense of teamwork.ResponsibilitiesCompleting repairs on Humanscale office productsDirect client interaction. The ideal candidate should be professional, polite, and present themselves wellDriving around central London completing Repair JobsFollowing a repair schedule to ensure that all daily tasks are completeInspecting and troubleshooting problems and issues reported by clients or colleaguesMaintaining Humanscale products in Clerkenwell Showroom Maintaining tools and equipment required to perform the role effectivelyEvents set up which include layout of furniture and installation Train/Liaise with Dealer network to explain any product issues/defects and how to rectify and remedy the issuesAvailability to work weekends when needed a necessityWorking out of Purfleet warehouse where stock and parts storedQualificationsMaintenance or relevant construction experience requiredFull Driving Licence held for at least 3 years. Experience at driving in London essentialTeam-working skills to liaise and work cooperatively with a small team of EngineersExcellent diagnostic and problem-solving skillsAbility to work under pressureFlexibilityBasic computer skills (Word, Excel)Humanscale is an equal opportunities employerPlease see our Privacy Policy: If you heard about this job from an existing employee working at the company, please write their full name in your application. Job SummaryJob ID: 2026-4385Category: 1000 - Miscellaneous

Our Client, a leading car manufacturer are currently looking for aGeneral Sales Managerto join their business based out of their Edgware Dealership.This role offers uncapped earning potential in a premium brand environment.\n \n \n This is a great opportunity for an experienced General Sales Manager who is wanting to increase their OTE and knowledge of the Hybrid market, or a time served Used/New Car Sal...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Offering a friendly working environment, a recently reviewed competitive rate of pay, and a secure position within an established company, we have an excellent opportunity for an HGV Class 2 Driver with a positive, can-do attitude. \n N&C Glass, a leading UK glass manufacturer, is part of the Nicholls and Clarke Group of Companies and has been supplying quality products to the glass industry for over ... \n \n ZIPC1_UKTJ

Date Posted:2026-06-03Country:United KingdomLocation:Otis London, 96 Great Suffolk Street, Southwark, London, SE1 0BEService Engineer (Escalator) - Night ShiftsKnightsbridge - LondonCompetitive Basic + Bonus + Benefits / AllowancesGreat brands have a great story. Ours is legendary.In 1854, Elisha Otis travelled to the New York World's Fair to promote his new invention. Standing high above the crowd on a platform elevator, he ordered the retaining rope cut. The crowd cried out. His safety brake held. And in that moment, one man changed the world's perspective on what's possible, sending it rising up.Who Are We Seeking?Otis is recruiting for an experienced and qualified Escalator Service Engineer to be based Knightsbridge London working on a permanent night 5 on 5 off shift pattern.Ideally, we would like engineers with exposure to service work on a variety of equipment / manufacturers of EscalatorsAs a Service Engineer, you will be qualified to at least NVQ level 3 or equivalent and will have in-depth knowledge of a variety of different makes of equipment (preferably including Otis),Someone who can demonstrate sound engineering principles to maintenance and fault diagnosis, whilst working to strict health and safety guidelines at all times.Working as part of a team you will cover all service, maintenance and small repair of the units on siteWhat is On Offer?On top of your competitive basic salary, you will receive overtime plus other allowances and company benefits, 25 Days holiday (inclusive of Bank Holidays with the 5 on 5 off / 2 on 2 off shift)Otis offers the opportunity for lifelong learning and progression through our Employee Scholarship Scheme and various other training initiatives. There are opportunities for development throughout Otis.More About UsOtis is the world's largest manufacturer and maintainer of people-moving products, including elevators, escalators and moving walkways. Our global presence ensures consistent quality, safety and service, wherever you are.We offer products and services in 200 countries and territories. Wherever you are, you can count on absolute consistency when it comes to quality, safety and style. Our designs come to life at our ISO-certified factories on four continents. Given our range of products, we're able to meet the diverse needs of the most demanding customers and passengers.Our global presence also enables us to offer the highest levels of personalized service, delivered by 31,000 expert mechanics worldwide.This is an excellent opportunity for an experienced Service Engineer who is looking to develop their career with a world-renowned company. We are interested in receiving applications from Service Engineers, Repair Engineers, Modernisation Engineers, Escalator Engineers, Lead Engineers, Call-Out Engineers, Staff Engineers, Principal Engineers or Resident Engineers who are happy to work at Harrods on a 5 on 5 off nights shift pattern.If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day.Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio.You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company.When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge.We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs.Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here .TPBN1_UKTJ

Senior Chiller Technical Pre-Sales Engineer (Commercial Cooling & Heating Technologies) - west London, UK \n (CANDIDATES FOR THIS ROLE MUST BE ELIGIBLE TO WORK IN THE UK WITHOUT THE NEED FOR SPONSORSHIP AND MUST BE ABLE TO TRAVEL FREELY IN EU COUNTRIES WITHOUT ANY RESTRICTIONS.) \n A new vacancy for a Senior Chiller Technical Pre-Sales Engineer with European division of leading global manufacturer of high... \n \n ZIPC1_UKTJ

Life on the teamJoin Computacenters highly successful Smart Infrastructure team in a key role supporting large-scale customer projects across the UK. Youll work closely with Solution Specialists, Account Teams, and strategic partners to shape compliant, commercially sound designs across structured cabling and smart building technologies.This is a visible role with the opportunity to influence bids, support major tenders, and contribute to high-value infrastructure programmes.What you'll doProduce accurate design estimates and bid responses for structured cabling, racks, PDUs, containment, WiFi, CCTV, and AV/MTR solutionsSupport account teams with solution design, pricing, and customer engagementEnsure bids are delivered using best practice (BICSI and manufacturer guidelines)Create handover packs, cabling schedules, wall elevations, schematics, and installation documentationOwn and refine cost models, applying value engineering to maximise marginProvide technical governance, risk management, and commercial assurance across opportunitiesSupport customer presentations and mid/post-bid discussionsWhat youll needStrong experience in structured cabling design and estimation (essential)Knowledge of containment/pathway design and survey validationUnderstanding of IP-connected solutions including WiFi, CCTV, AV, and meeting room technologyStrong knowledge of Microsoft Teams Rooms (MTR) design and cabling principlesCAD and Bluebeam experience, plus strong Excel/Office skillsMinimum two manufacturer design accreditations (e.g. Corning, Panduit, Systimax, Nexans/Aginode)Commercial confidence (costing, margins, risk awareness), ideally with experience on £500K+ bidsWillingness to work towards BICSI (RCDD/CDCDP) or relevant AV/WiFi/CCTV certificationsTPBN1_UKTJ

What you'll be doing:We are currently recruiting for an experienced technology leader in Supply Chain. We require somebody who has extensive (15+ years) leading Supply Chain initiatives, either as part of a consulting / technology partner, or as part of a global manufacturer / retailer.The successful candidate needs to be customer facing, able to offer insights and guidance to Senior / C-level client contacts (e.g. Global Head of Supply Chain at JLR). This is a focus area for the industry and this role enables the successful candidate to help our clients tackle some of their biggest challenges.What experience you'll bring:15+ years’ experience leading Supply Chain initiatives, either as part of a consulting / technology partner, or as part of a global manufacturer / retailerSupply Chain expertise to a level capable of challenging / offering POV to client c-level stakeholdersCredibility to quickly build a level of trust with our clients’ leaders responsible for Supply Chain teamsA thorough understanding of the current technology stacks, key technology partners and emerging trends within Supply ChainA deep understanding of the fundamental business and technology problems faced by manufacturers and retailers, specifically in the area of Supply ChainExperience leading solution design (and articulation of that solution) for RFI, RFP or bid responses delivering engaging bid collateral aligned clearly to the clients’ specific business challengesExperience of creating proactive go-to-market IT strategy propositions for end client considerationSkills we're looking for:An ability to listen well, and also (in an appropriate manner) challenge conventional thinking… both internally and externally, to best address the challenges in supply chainAn ability to create a narrative to present to customers – bringing your business and technical expertise to life for a technical and non-technical audienceProject planning and team management / influence skills (especially within a matrix environment, where the team members sit within service lines or other business units)You must be comfortable leading client-facing engagements, presenting and orchestrating your NTT DATA colleaguesYou must have a proactive approach to work and a strong say-do ratio (Delivering on all the things that you say you’re going to deliver both internally and externally)Who we are:At NTT DATA, you have endless opportunities to think big, act bold and take ownership. As a $30+ billion business and technology services, AI and digital infrastructure leader, we co-innovate solutions with clients and partners globally for business and societal impact. Serving 75% of the Fortune Global 100, with experts in over 70 countries, we encourage experimentation and recognize great work. Proudly a Global Top Employer, NTT DATA is part of NTT Group, which invests over $3 billion annually in R&D. Make this the place where you belong, learn, and build your network. Make this the place where you grow.what we'll offer you:We offer a range of tailored benefits that support your physical, emotional, and financial wellbeing. Our Learning and Development team ensure that there are continuous growth and development opportunities for our people. We also offer the opportunity to have flexible work options.You can find more information about NTT DATA UK & Ireland here: We are an equal opportunities employer. We believe in the fair treatment of all our employees and commit to promoting equity and diversity in our employment practices. We are committed to creating a diverse and inclusive workforce. We actively collaborate with individuals who have disabilities and long-term health conditions which have an effect on their ability to do normal daily activities, ensuring that barriers are eliminated when it comes to employment opportunities. In line with our commitment, we guarantee an interview to applicants who declare to us, during the application process, that they have a disability and meet the minimum requirements for the role. If you require any reasonable adjustments during the recruitment process, please let us know. Join us in building a truly diverse and empowered team.Job Advert Attachment:SolutionDirectorSupplyChainJOBSPECIndustryUKIJuly_26.docx

Senior Electronics Design Engineer - RF Systems Competitive Salary + Company Benefits + Technical Progression Location: Enfield (Commutable from: North London, Hertfordshire, Essex, Harlow, Cheshunt, Waltham Abbey and surrounding areas) \n Are you an experienced Electronics Design Engineer looking to work on advanced radar technology and develop your expertise in RF and antenna systems? \n On offer is the opportunity to work on specialist maritime radar systems, take ownership of projects and develop your technical skills within an experienced engineering team. \n This company are a leading developer and manufacturer of maritime navigation and surveillance radar systems, employing over 170 people. They are now looking for an experienced Electronics Design Engineer to join their specialist team. \n On offer is a varied role covering PCB design, RF systems, antenna development and testing, alongside supporting production, suppliers and customers. You will also investigate technical issues and manage smaller engineering projects. \n This role would suit an Electronics Design Engineer, Hardware Engineer or similar looking to develop within RF and antenna technology. Engineers from electronics, aerospace, defence, telecommunications, communications, satellite or high-frequency backgrounds are encouraged to apply. \n The Role: \n\n • Work on advanced maritime radar & RF technology\n, • Develop your expertise in RF, antenna & PCB design\n, • £60k-£65k + Hybrid Working + Progression\n\n The Candidate: \n\n • Electronics Design / Hardware Engineering experience\n, • PCB design & electronic development knowledge\n, • Keen to develop into RF & antenna technology\n\n Reference Number: BBBH278811 To apply for this role or to be considered for further roles, please click "Apply Now" or contact Sagar Sherchan at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Area Sales Manager \n London, M25 & Home Counties (Including Hertfordshire, Essex, Kent, Surrey, Berkshire, Buckinghamshire and surrounding areas) \n £45,000 - £55,000 DOE + Bonus + Car Allowance + Pension + Life Assurance + 33 Days Holiday + Additional Benefits \n Are you an experienced Sales Manager with a background in construction, manufacturing or engineering, looking for the opportunity to drive business growth with an established UK business? \n This is a fantastic opportunity to take ownership of a well-established territory, developing long-term relationships with customers while identifying new commercial opportunities. You'll play a key role in supporting continued business growth, backed by an experienced team and a company that continues to invest in its people, products and future. \n The business is a long-established UK manufacturer, supplying high-quality engineered solutions into a range of construction and industrial markets. With decades of continued success and a reputation built on quality, reliability and customer service, they offer genuine long-term career progression within a collaborative and forward-thinking environment. \n In this role, you'll develop and deliver strategic sales plans, build a strong pipeline of new business, grow existing customer accounts and represent the business across your region. Working closely with internal teams, you'll help ensure an excellent customer experience while contributing to the company's ongoing commercial success. \n This position would suit a commercially driven Sales Manager with experience within manufacturing, engineering or construction, looking to join a stable and growing organisation where initiative, autonomy and results are recognised and rewarded. \n The Role \n\n • Develop and implement strategic sales plans to achieve revenue and growth targets\n, • Generate new business opportunities while strengthening existing customer relationships\n, • Build and manage a healthy sales pipeline using CRM systems and accurate forecasting\n\n The Person \n\n • Previous experience in a Sales Manager or Business Development role within manufacturing, engineering or construction\n, • Strong commercial awareness with a proven ability to win and develop profitable business\n, • Excellent relationship-building and communication skills\n\n Reference Number: BBBH277744 \n To apply for this role or to be considered for further roles, please click "Apply Now" or contact Billy Clark at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Job title: Air Conditioning Engineer - Maintenance ( No weekend work) \n Salary: up to 58k \n Location: West London \n My client is looking for an Air conditioning engineer with F-gas qualifications maintains, and repairs air conditioning systems that use F-gas refrigerants. F-gases are fluorinated gases, such as HCFCs, HFCs, and CFCs. They are a nice, well run SME company. \n Responsibilities \n\n • Maintain, and service air conditioning systems\n, • Recover, handle, and supply equipment containing F-gas refrigerants\n, • Check for leaks in stationary refrigeration, air conditioning, and heat pump equipment\n, • Diagnose and repair faults on a variety of systems including, Split systems, multi-split systems, VRV/VRF systems, Packaged units, AHUs and associated ventilation equipment\n, • Install new air conditioning systems to manufacturer specifications\n, • Commission newly installed equipment\n, • Carry out leak detection, refrigerant recovery and recharging in accordance with FGas, Regulations\n, • Replace compressors, fans, motors, expansion valves, PCB boards and other mechanical/electrical components\n, • Complete emergency reactive call-outs within agreed response times\n, • Perform electrical fault-finding associated with HVAC equipment\n, • Ensure all maintenance records, service sheets and commissioning documentation are completed accurately\n, • Produce clear reports identifying defects and recommended remedial works\n, • Liaise professionally with customers, clients and site representatives\n, • Maintain company vehicles, tools and specialist equipment in a clean and serviceable condition.\n, • Ensure compliance with all health and safety legislation.\n\n Qualifications \n\n • F-gas qualification and certification\n, • Level 2 award in F-Gas and ODS Regulations - Category I\n, • NVQ Diploma in Installing, Testing and Maintaining Air-Conditioning and Heat Pump Systems\n

Workshop Engineer £32,000 - £38,000 + Overtime + Bonus Scheme + Training + Progression + Company Benefits Enfield, commutable from: Harlow, Epping, Barnet, Potters Bar, St Albans, Hertford, Welwyn, Chigwell or Surrounding AreasAre you from a manufacturing, metal, or machining background and looking for a varied role with a well-established company that offers excellent overtime, on-the-job training, and long-term career progression?This is a fantastic opportunity to join a reputable manufacturer in a niche and rewarding position where you'll be supported with in-house training and clear routes for development.The company produces specialist products for clients across the globe. Due to continued success and expansion, they're looking to grow their close-knit engineering team at their Enfield site.In this hands-on role, you'll support a range of workshop operations, from machine setting to assisting in the production of metal finishes, before materials are supplied worldwide.This role would suit someone with experience in manufacturing, metalworking, or machining, who's eager to learn, develop their skills, and maximise earnings through overtime.The Role: \n\n • Support the manufacturing of metal products and materials\n, • Work for a global leader supplying the construction industry\n, • Monday to Friday with flexible start and finish times\n\n The Person: \n\n • Background in mechanical engineering\n, • Hands-on experience in manufacturing, metalwork, machining or similar\n, • Based within a commutable distance of Enfield\n\n Reference Number: BBHH277266To apply for this role or to be considered for further roles, please click "Apply Now" or contact Ben Fenton at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

The RoleWe are currently recruiting for an experienced PSV Technician / Coach Fitter / Bus Engineer to join an established engineering team based in Hayes.This is an excellent opportunity for a skilled commercial vehicle technician to work on a modern fleet of high-specification coaches, carrying out a wide range of mechanical, electrical, diagnostic and preventative maintenance work.Working straight days 7am till 5pm, Monday - Friday - no weekends or rotating shiftsKey Responsibilities\n\n • Carry out routine servicing and maintenance of PSV and coach vehicles\n, • Diagnose and repair mechanical and electrical faults\n, • Carry out fault-finding and diagnostic work\n, • Repair and replace worn or defective components\n, • Complete preventative maintenance and vehicle inspections\n, • Carry out pre-MOT inspections and prepare vehicles for testing\n, • Ensure all vehicles are maintained to a high standard of safety and reliability\n, • Complete maintenance records and inspection paperwork accurately\n, • Work to manufacturer specifications and company maintenance procedures\n, • Support the wider engineering team to ensure maximum vehicle availability\n, • Maintain high standards of workmanship across all maintenance and repair activities\nAbout YouThe ideal candidate will have:\n\n, • Previous experience as a PSV Technician, Bus Engineer, Coach Fitter or HGV Technician\n, • Strong mechanical and electrical knowledge\n, • Excellent diagnostic and fault-finding skills\n, • A full UK driving licence\n, • The ability to work independently and as part of a team\n, • A strong focus on safety, quality and attention to detail\n, • Good communication and problem-solving skills\nWhy Apply?This is a great opportunity for an experienced technician looking to develop their career within a professional and well-established PSV environment.Working straight days 7am till 5pm, Monday - Friday - no weekends or rotating shifts You will have the opportunity to work on modern, high-specification coaches, gaining exposure to a range of complex mechanical, electrical and diagnostic systems.The role would suit someone from a PSV, HGV, bus, coach or heavy commercial vehicle background who is looking for a long-term position with a strong engineering focus.Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, NMS Recruit will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us .

Electrical Maintenance Engineer£36,000 - £40,000Monday - Friday, 48 Hours + Alternate SaturdaysSouthall \n Are you an Electrically biased Maintenance Engineer looking for a new role that can develop your skillset by providing fully funded qualifications & courses? Are you looking for a new and exciting opportunity within a growing and successful food manufacturing business who have continued to invest into their facility and pride themselves on staff retention and development? \n Due to continued growth, my client is looking for a maintenance engineer to join the team at their state of the art facility in Southall. This is an amazing opportunity for a Maintenance Engineer looking to gain skills and experience within a food manufacturing business that is one of the largest in the industry. The successful applicant will be responsible for maintaining and repairing a range of production machinery, this role offers lots of day-to-day variety, that will see you carry out the planned, preventative and reactive maintenance. \n This is a great opportunity to join an industry leading business who have an excellent staff retention and development record, the team will provide training to enhance your skillset and become a well rounded engineer. With a days based pattern this role offers great work/life balance within a special purpose machinery business. \n All skill levels of Maintenance Engineers are encouraged to apply, for more information please contact Alice Holwell \n The Role:Electrical MaintenancePlanned, Reactive and Preventive Maintenance*Working on manufacturing equipment \n The Candidate:Working experience as a Maintenance EngineerKnowledge of processing/ Manufacturing equipment*A commutable distance to Southall \n elix sourcing solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment. \n Maintenance|Engineer|Electrical|Electrician|FMCG|Food|Manufacturing|Manufacturer|Manufactured|Production|Technician|Reliability|London|Hayes|Southall| \n INDLP

Service Engineer (Full Training Provided)£40,000 - £45,000 + Full Industry Training + Door to Door Pay + Overtime + Van & Fuel Card + Excellent Company BenefitsHome based , covering London & Surrounding areasAre you a Fire & Security or Access Control background? Are you looking to join an industry leading company who offer full specialist training, door to door pay and long term career progression?On offer is a brilliant opportunity to join a nationwide company who are renowned for brilliant staff retention, through providing staff with brilliant training and plenty of overtime.This well established company manufactures specialist access control equipment for construction sites across the UK. Due to recent success they are looking to expand their engineering team.In this role you will be installing and maintaining specialist custom made access control equipment to customer sites across London. Full specialist training will be provided to a successful applicant.This role would suit some with a background in Fire & Security or Access Control, looking to utilise skill and experience with an established company that provide full training, plenty of overtime and door to door pay.The Role: \n\n • Installation & Service of Access Control equipment.\n, • Working with a market leading manufacturer.\n, • Full training provided.\n\n The Person: \n\n • Access Control or Fire & Security engineering background.\n, • Looking for training in a new industry.\n, • Full UK Driving License.\n\n Reference Number: BBHH278086To apply for this role or to be considered for further roles, please click "Apply Now" or contact Sam Claridge at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Commercial Boiler Service Engineer (Field Based) – South East England – London / Andover / Rochester – £47,000–£50,000 + Overtime \n\n • Pay: £47,000–£50,000 basic + overtime at 1.5x\n, • Location: Home/field-based, covering the South East of England, with access to the Andover or Rochester depot\n, • Permanent\n, • Benefits: 25 days holiday + bank holidays, pension (5% employee / 3% employer), corporate eyecare scheme, and discretionary benefits including group life assurance and private medical insurance after probation\n, • Field-based role: Company vehicle provided, with regular travel to customer sites across the South East\n\n Commercial Boiler Service Engineer (Field Based) – Company Overview: \n Our client is an established name in temporary plant hire, providing specialist heating and cooling solutions to commercial and industrial customers across the UK. As demand across the South East continues to grow, they are looking for an experienced Boiler Engineer to join their operations team. \n This is a home/field-based role working on the installation, commissioning, servicing and repair of temporary heating and cooling equipment across the region. You'll work on commercial equipment at customer sites, with the support of the wider depot and operations team. \n Boiler Engineer (Field Based) – The Role: \n This is a hands-on field service position where you'll install and commission temporary heating and cooling systems at customer sites, ensuring equipment is safe, compliant and operating to the required standard. \n You'll service and prepare equipment before delivery, diagnose faults and carry out repairs where required, responding to breakdowns and emergency call-outs when necessary. You'll work directly with customers on site, providing a professional service and keeping them informed throughout the job. \n You'll also complete accurate records of installations, servicing, repairs and safety inspections, while ensuring all work complies with relevant regulations, codes of practice and manufacturer requirements. \n The role involves regular travel across the South East, so you'll need to be comfortable working independently at different customer sites. You'll be provided with a company vehicle and the role offers regular opportunities for overtime paid at 1.5x. \n Commercial Boiler Service Engineer (Field Based) – What You'll Bring: \n You'll have proven experience installing, servicing and maintaining commercial heating equipment, together with the relevant gas qualifications. \n The following qualifications are essential: \n\n • COCN1\n, • CIGA1\n, • CDGA1\n, • ICPN1\n, • TPCP1/1A\n, • ICAE1\n\n Additional 18th Edition, OFTEC or F-Gas qualifications would be advantageous, as would previous experience working with chillers or other commercial cooling equipment. \n You'll have strong diagnostic and fault-finding skills and a methodical approach to troubleshooting. A safety-first mindset is essential, together with the ability to work professionally with customers and confidently manage jobs independently in the field. \n A full UK driving licence is essential, along with the flexibility to travel across the South East. \n DON'T MISS OUT ON THIS GREAT OPPORTUNITY – APPLY NOW \n Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. \n Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful. \n

Sales Engineer (Industrial Products) \n \n £35,000 - £40,000 + Uncapped Commission (£50-£60k OTE) + Car Allowance / Company Car + Training + Progression + Autonomy + Company Benefits \n \n South East (Field-Based) \n \n Are you a Sales Executive with a background in industrial plastics or similar, looking to join an established international manufacturer offering strong earning potential and long-term progression? \n \n You will be responsible for developing new business and managing existing accounts across a range of industrial sectors, providing tailored polyurethane and engineering plastics solutions to customers operating within recycling, quarrying, mining, bulk handling and manufacturing environments. \n \n The company is a respected international manufacturer specialising in advanced polyurethane and engineering plastic products. With continued growth across the UK market, they offer a stable platform, technical development and excellent earning potential. \n \n This role would suit a Sales Engineer with experience in industrial products or solutions, looking to maximise earnings and take ownership of their territory. \n \n The Role: Develop new business and manage existing customer accounts across the UK Provide technical sales support for industrial plastics and polyurethane solutions Prepare quotations, proposals and commercially aligned solutions based on customer requirements Conduct site visits, product demonstrations and customer meetings Work closely with internal technical and production teams to support projects and customer delivery Support exhibitions, trade shows and industry events \n \n The Person: Experience in technical sales, field sales or applications engineering Background in industrial plastics, polyurethane products, or engineering * Full UK driving licence \n \n If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n \n Reference Number: BBBH25371g \n \n Keywords: Sales Engineer, Technical Sales, Industrial Plastics, Polyurethane, Applications Engineer, Business Development, Manufacturing, Engineering Materials, Field Sales, Industrial Products, Recycling, Quarrying, Bulk Handling \n \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. \n \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n

We're recruiting for an Air Conditioning Service & Breakdown Engineer to join a growing and well-established business working across high-end residential properties throughout London.This is a fantastic opportunity for an experienced Air Conditioning Service & Breakdown Engineer to join a professional and supportive company offering ongoing training, excellent benefits and genuine career progression.Key Responsibilities:Carry out servicing, maintenance, and reactive breakdown repairs on air conditioning systemsDiagnose and repair electrical and mechanical faults efficientlyAttend emergency callouts and provide a prompt, professional serviceWork on split, multi-split, VRV/VRF, and heat pump systemsDeliver a high standard of workmanship and customer service within occupied residential propertiesRequirements:Previous experience as an Air Conditioning Service & Breakdown EngineerF-Gas QualificationFull UK Driving LicenceStrong fault-finding and diagnostic skillsProfessional, customer-focused approach with excellent communication skillsWhat's on Offer:Company van and fuel cardAbove market rate salaryPaid overtimePrivate medical insurance26 days holidayPension schemeOngoing training and manufacturer certificationsGenuine career development opportunitiesInterested?Apply now or get in touch for a confidential conversation.Bond Williams Professional Recruitment are an equal opportunity employer and operate as an Employment Business and Recruitment AgencyTPBN1_UKTJ

Applications Engineer \n London \n £90,000 - £120,000 Basic + 15% Bonus + Car Allowance + Private Healthcare + Pension + International Travel + Progression + PACKAGE! \n Are you looking for an Applications Engineer position where you can really build your career within a global business and progress into management by building your own team, director or VP-level positions? Do you have a strong mechanical engineering background with some electrical knowledge and want to work on major data centre projects across the UK and Europe? \n This global industrial technology business operates across electrical distribution, communications, networking and technical services, working with some of the biggest names in the data centre industry. They are continuing to expand their services offering across mechanical and electrical infrastructure, including high-density cooling, central plant, chillers and electrical distribution and looking for an Applications Engineer. \n As an Applications Engineer, you will act as the technical link between customers, consultants and the sales team, helping develop technically feasible solutions and taking projects into the engineering cycle. You will receive manufacturer training and support towards recognised data centre qualifications, with the opportunity to make the role your own and progress quickly within a large international organisation. \n Your role as an Applications Engineer You Will: \n\n • Act as the technical liaison between customers, consultants and sales teams.\n, • Work with mechanical systems including cooling, heat exchangers and high-density data centre environments.\n, • Use electrical knowledge to support solutions around central electrical distribution.\n, • Provide customer-facing technical support.\n, • Cover the EMEA region with some international travel.\n\n As an Applications Engineer You Must: \n\n • Have a strong mechanical engineering background.\n, • Have some electrical engineering knowledge.\n, • Be technically competent and confident dealing with customers and consultants.\n, • Have an understanding of data centre environments, high density cooling.\n, • Be willing to travel internationally when required.\n, • Live within a commutable distance of London\n\n If interested, please contact Georgia or Billy on for immediate consideration. \n Keywords: product manager, product specialist, mechanical engineer, applications engineer, solutions engineer, data centre, Bracknell, London, Reading, Slough, EMEA. \n This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. \n Future Engineering Recruitment Ltd are that of an Employment Agency. \n Please visit our website to view other positions we are currently handling. \n Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as their details will not be processed.

Sales Executive (Engineering Products) \n \n £35,000 - £40,000 + Uncapped Commission (£50-£60k OTE) + Car Allowance / Company Car + Training + Progression + Autonomy + Company Benefits \n \n South East (Field-Based) \n \n Are you a Sales Executive with a background in industrial plastics or similar, looking to join an established international manufacturer offering strong earning potential and long-term progression? \n \n You will be responsible for developing new business and managing existing accounts across a range of industrial sectors, providing tailored polyurethane and engineering plastics solutions to customers operating within recycling, quarrying, mining, bulk handling and manufacturing environments. \n \n The company is a respected international manufacturer specialising in advanced polyurethane and engineering plastic products. With continued growth across the UK market, they offer a stable platform, technical development and excellent earning potential. \n \n This role would suit a Sales Engineer with experience in industrial products or solutions, looking to maximise earnings and take ownership of their territory. \n \n The Role: Develop new business and manage existing customer accounts across the UK Provide technical sales support for industrial plastics and polyurethane solutions Prepare quotations, proposals and commercially aligned solutions based on customer requirements Conduct site visits, product demonstrations and customer meetings Work closely with internal technical and production teams to support projects and customer delivery Support exhibitions, trade shows and industry events \n \n The Person: Experience in technical sales, field sales or applications engineering Background in industrial plastics, polyurethane products, or engineering * Full UK driving licence \n \n If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n \n Reference Number: BBBH25371f \n \n Keywords: Sales Engineer, Technical Sales, Industrial Plastics, Polyurethane, Applications Engineer, Business Development, Manufacturing, Engineering Materials, Field Sales, Industrial Products, Recycling, Quarrying, Bulk Handling \n \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. \n \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. \n

Fire Alarm Service Engineer – South East London- £35,000 - £42,000 Basic Salary + On-Call Allowance + Overtime \n\n • £35,000 - £42,000 basic salary (depending on experience).\n, • Company vehicle.\n, • 1 in 7 on-call rota.\n, • £150 standby payment per on-call week.\n, • Door-to-door pay for out-of-hours call-outs.\n, • Monday to Friday working hours.\n, • 22 days annual leave, increasing to 25 days with length of service.\n, • Long-term career with an established and growing business.\n\n Role Overview \n We are recruiting for an experienced Fire Alarm Service Engineer to join a well established fire and security company covering South East London. \n This is a service, fault finding and maintenance role with no installation work involved. You'll be responsible for carrying out planned preventative maintenance, servicing and reactive fault finding on a wide range of fire alarm systems, ensuring all systems remain compliant and fully operational. \n Fire Alarm Service Engineer – Role & Responsibilities \n\n • Service, maintain and fault-find on a variety of fire alarm systems.\n, • Diagnose and rectify faults efficiently to minimise system downtime.\n, • Carry out planned preventative maintenance visits.\n, • Complete service reports and all relevant paperwork accurately.\n, • Identify remedial works and report findings where required.\n, • Ensure all work is completed in accordance with current industry standards and fire safety regulations.\n, • Provide excellent customer service while representing the company on site.\n, • Participate in a 1 in 7 on-call rota.\n\n Fire Alarm Service Engineer – Skills & Experience Required \n\n • Proven experience servicing and maintaining fire alarm systems.\n, • Strong fault-finding and diagnostic skills.\n, • Good knowledge of both conventional and addressable fire alarm systems.\n, • Previous experience within a service and maintenance role (not installation).\n, • FIA qualifications or manufacturer training would be advantageous.\n, • Full UK Driving Licence or equivalent is essential.\n, • Excellent communication and customer service skills.\n, • Ability to work independently and manage your own workload.\n\n Get Staff acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful.

Area Sales ManagerEnfield \n £38,000 - £48,000 Basic + Commission + Company Car + Flexible Diary + Technical Training + Long-Term Stability \n Enjoy the freedom to manage your own diary, organise your own customer visits and increase your earnings through a realistic commission structure. As an Area Sales Manager, you will manage a mixture of existing accounts and new business opportunities, and have the flexibility to plan your working week around your customers. This is an ideal opportunity for someone looking for autonomy, longevity and a technical sales position where they will not be micromanaged. \n Join a company that values its employees, offers a supportive and collaborative environment, and provides ongoing manufacturer training. As an Area Sales Manager, you will benefit from a relaxed and realistic company culture built around trust, flexibility and accountability. The business has an experienced workforce, and gives employees the independence to manage their territory while still having access to technical support when needed. \n Your Role as Area Sales Manager Will Include: \n\n • Managing existing customer accounts across your territory\n, • Developing new business with industrial and engineering customers\n, • Following up enquiries and leads supplied by the company\n, • Visiting customer sites to understand their technical requirements\n\n As Area Sales Manager You Will Need to Have: \n\n • Previous technical sales, engineering sales or account management experience\n, • The ability to manage existing accounts and generate new business\n, • Mechanical, electrical or general engineering knowledge\n, • Confidence preparing quotations and managing the full sales process\n\n Please apply or contact Liam Martindill on for immediate consideration. \n This vacancy is being advertised by Future Engineering Recruitment. The services of Future Engineering Recruitment are those of an Employment Agency. \n Please visit our website at futureengineer.co.uk to view other positions we are currently handling. \n Future Engineering Recruitment can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or who are awaiting an application to obtain this right or permit, should not apply, as their details will not be processed. \n We will endeavour to respond to all applicants. However, due to the volume of applications received, we can only guarantee that shortlisted candidates will be contacted. \n Keywords: Area Sales Manager, Sales Engineer, Technical Sales Engineer, Engineering Sales, Account Manager, Business Development Manager, Mechanical Engineering, Electrical Engineering,

Service Engineer (Pumps/Local Patch) \n London, England (Home Counties, M25 Patch) \n £40,000 - £45,000 (OTE £70k+) + Training + Progression + Overtime + Door to Door + Van + Pension + Benefits \n Are you a service engineer, coming from a background within Pumps, looking to cover a local patch, in a provided van, with door to door pay and plenty of optional overtime? \n Are you looking to join a well-established, highly reputable company offering specialist internal product training alongside external manufacturer training? \n In this role, you will be responsible for the instillation, service and maintenance, troubleshooting and repair of Pump systems, in both residential and commercial settings, for the public and private sector traveling across London and the Home Counties. \n Founded over 20 years ago, this dynamic, family feel company are keen to continue growing, with the aim to quickly make a name for themselves industry leaders. \n This role would suit a service engineer or similar with a background within Utilities, having prior experience servicing and maintaining pumps. You will have a full, valid UK drivers license, happy to travel a local patch. \n The Role: \n\n • Service and maintain pumps\n, • Working in both residential + commercial environments\n, • Travel a local patch across London and Home Counties\n, • Extensive overtime available\n, • Monday to Friday, 8am-4pm, 37.5 hours a week\n\n The Person: \n\n • Service Engineer\n, • Background within pumps\n\n Reference: BBBH26717 \n Mechanical, Pump, Water, Wastewater, Service, Maintenance, Repair, Field Service, Engineer, Pump Engineer, London, Home Counties, \n If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Role: Field Sales Engineer \n Location: Home Counties \n We are currently recruiting for an experienced Field Sales Engineer to join a well-established, growing engineering manufacturer supplying high-spec, safety-critical products into the oil & gas, energy, and hydrogen sectors. \n \n The Role \n As a Field Sales Engineer, you will be responsible for developing and managing customer relationships across the South, driving sales within technically demanding and quality-critical environments. \n Responsibilities include: \n\n • Managing and growing existing client accounts\n, • Identifying and developing new business opportunities\n, • Negotiating and closing sales of high-quality engineered products\n, • Working closely with internal teams to ensure customer requirements are met\n, • Representing the business across oil & gas, energy, and related sectors\n\n \n Requirements \n\n • Mechanical engineering qualification (or similar technical background)\n, • Proven experience in technical sales within engineering/manufacturing\n, • Experience selling into oil & gas, energy, or similar sectors preferred\n, • Strong commercial awareness and negotiation skills\n, • Self-motivated, results-driven, and able to work autonomously\n, • Full UK driving licence\n\n \n What's on Offer \n\n • Competitive base salary\n, • Car allowance\n, • Discretionary bonus\n, • Benefits package\n

Product ManagerLondon \n £90,000 - £120,000 Basic + 15% Bonus + Car Allowance + Private Healthcare + Pension + International Travel + Progression + PACKAGE! \n Are you looking for a Product Manager position where you can really build your career within a global business and progress into management by building your own team, director or VP-level positions? Do you have a strong mechanical engineering background with some electrical knowledge and want to work on major data centre projects across the UK and Europe? \n This global industrial technology business operates across electrical distribution, communications, networking and technical services, working with some of the biggest names in the data centre industry. They are continuing to expand their services offering across mechanical and electrical infrastructure, including high-density cooling, central plant, chillers and electrical distribution. \n As a Product Manager, you will act as the technical link between customers, consultants and the sales team, helping develop technically feasible solutions and taking projects into the engineering cycle. You will receive manufacturer training and support towards recognised data centre qualifications, with the opportunity to make the role your own and progress quickly within a large international organisation. \n Your role as a Product Manager You Will: \n\n • Act as the technical liaison between customers, consultants and sales teams.\n, • Work with mechanical systems including cooling, heat exchangers and high-density data centre environments.\n, • Use electrical knowledge to support solutions around central electrical distribution.\n, • Provide customer-facing technical support.\n, • Cover the EMEA region with some international travel.\n\n As a Product Manager You Must: \n\n • Have a strong mechanical engineering background.\n, • Have some electrical engineering knowledge.\n, • Be technically competent and confident dealing with customers and consultants.\n, • Have an understanding of data centre environments, high density cooling.\n, • Be willing to travel internationally when required.\n, • Live within a commutable distance of London\n\n If interested, please contact Georgia or Billy on for immediate consideration. \n Keywords: product manager, product specialist, mechanical engineer, applications engineer, solutions engineer, data centre, Bracknell, London, Reading, Slough, EMEA. \n This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency. \n Future Engineering Recruitment Ltd are that of an Employment Agency. \n Please visit our website to view other positions we are currently handling. \n Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as their details will not be processed.

Mechanical Fitter£35,000 - £40,000 + Mon - Fri + Overtime + Training + Private Healthcare + Enhanced PensionSouthallAre you a Mechanical Fitter or similar looking to join a market-leading company who are undertaking a huge period of growth, offering a stable Monday to Friday role, with an early finish on a Friday, optional overtime to boost your earnings and a range of lucrative company benefits and routes to progress and learn different skills? \n On offer is the opportunity to join an independent manufacturer that was founded over 40 years ago, who have built their reputation on their excellent training and development. They supply their turnkey industrial blower and vacuum technology to SMEs and blue chip clients across the UK. In recent years, they have joined one of the largest compressed air manufacturing groups in the world. \n In this varied role, you will be workshop-based and responsible for building and assembling their full product range within Industrial Blowers and Vacuum Pumps. You will receive full training and the opportunity to learn servicing and metal spraying. This role is Monday to Thursday, 8AM to 5PM, with a 2PM finish on a Friday. \n This role would suit a Mechanical Fitter or similar, who wants to join a market-leading business that will provide comprehensive onboarding and additional training alongside mentorship, the option to progress and the ability to boost earnings with overtime in the future.The Role: \n\n • Assembling Industrial Blowers and Vacuum Pumps\n, • Stripping down and replacing parts, using hand tools\n, • Basic Fault Finding\n, • Overtime paid at 1.5x\n, • Early finish Friday, 40 hours a week\n\n The Person: \n\n • Mechanical Fitter or similar\n, • Looking for full time, permanent role\n, • Commutable to Southall\n\n Reference: 26958A \n Key Words: Mechanical Fitter, Fitter, Assembler, Assembly, Plant, Industrial, Heavy Machinery, Bearings, Motor, Blowers, Pumps, Southall, Ealing, London, HanwellIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

A really good chance to join an already well established commercial dishwasher and glass washer manufacturer with over 50 years experience as they go through a massive expansion push. Over the next couple of years there will be some amazing changes with them which will see their name be on everyone’s lips for what the they have done, and what they will do. Their engineering team has been very long standing and I can only guess that being looked after and being valued, and being appreciated, and being rewarded has something to do with their low staff turnover. \n \n Due to expansion they are recruiting for a commercial dishwasher technician, you will be:- \n \n\n • Providing service and maintenance on a wide range of commercial dishwashers, glass washers, warewashing, conveyor machines etc.\n, • Working on all manufacturers equipment\n, • Covering London and the home counties area – 2-3 days in London, the rest being outside\n\n \n Preferred Skills of a commercial dishwasher technician \n \n\n • Living anywhere in or around the London or M25 area or home counties area os anywhere in the south east would be considered\n, • Experience needed on commercial dishwashers and / glass washers – are you a COMCAT engineer who is sick of working on ovens in this weather?\n, • The company may also look at a commercial laundry engineer who does a bit of work on washers\n, • OR they may even look at a white goods engineer but you would need to be the ’Ronaldo’ of white goods with a decent amount of years under your belt\n, • Basic electrical safety course needed\n\n \n Benefits and salary of a commercial dishwasher engineer \n \n\n • 35-38k basic depending on experience on commercial dishwashers, glass washers or warewashing\n, • Door to door travel pay\n, • Van, phone, company pension\n, • 23 days holiday + bank holidays\n, • overtime available and call out weekend rota\n, • Further and continuous training if required\n\n \n \n For an immediate interview contact Adam Southam \n \n In the event that you are contacted for a role, please note that as part of the registration process you shall be required to provide FRONTrunner Recruitment Ltd. with proof of identity as well as proof of eligibility to work in the United Kingdom.

IntroductionNigel Wright are partnering with Charles Edwards to appoint an Head of Applied Finishes. This is a rare opportunity to join a growing British luxury manufacturer at a pivotal stage in its development, combining craftsmanship, technical expertise and strategic leadership. This role will lead the evolution of a business-critical finishing function, ensuring the exceptional quality and character that define Charles Edwards products today while helping shape the future of the company's manufacturing capabilities.Charles Edwards is a London-based designer and manufacturer of luxury decorative lighting, renowned for creating handcrafted pieces inspired by historical design references. Working with leading interior designers and discerning clients around the world, the company produces both bespoke commissions and collection products for prestigious residential and commercial projects. The business is experiencing strong growth and continues to invest in its manufacturing capabilities, creating exciting opportunities for ambitious individuals who want to make a lasting impact.Location: South Wimbledon, London (predominantly site-based)The RoleThis is far more than a traditional finishing or production role. The successful candidate will have the opportunity to safeguard and develop specialist finishing expertise, work closely with highly skilled artisan suppliers, and create a roadmap for bringing key capabilities in-house. You'll be trusted to shape strategy, influence investment decisions, develop new processes, and ultimately build a world-class finishing operation within a respected luxury British brand. Reporting into the leadership team, you will take ownership of all aspects of applied finishes and metal finishing strategy.Key responsibilities include:• Managing relationships with specialist finishing suppliers and subcontractors.• Leading quality, testing and compliance standards across all finishes.• Driving research and development of luxury brass finishes, patinas and coatings.• Creating the business case and implementation plan for an in-house finishing facility.• Establishing manufacturing processes, standards and best practices.• Building and leading a specialist finishing team as the function evolves.• Working closely with Operations, Production, Product Development and Finance to support business growth and continuous improvement.What We're Looking For• 10+ years' experience within metal finishing, surface treatments, coatings, architectural metalwork, decorative manufacturing or related specialist industries.• Strong knowledge of brass finishing, patination, coatings, polishing or surface treatment technologies.• Experience managing teams, suppliers, technical partners or specialist manufacturing operations.• A track record of leading change, developing new capabilities or scaling production environments.• Commercial awareness and the ability to contribute to investment and business planning decisions.• A genuine appreciation for craftsmanship, heritage products, design and manufacturing excellence.• Strong leadership and relationship-building skills, with the ability to influence a broad range of stakeholders.Why This Role Stands Out• Opportunity to build and shape a new in-house finishing capability.• Direct influence on the future growth of a premium British manufacturer.• A rare blend of technical expertise, craftsmanship, leadership and strategy.• Exposure to luxury products, heritage design and bespoke manufacturing.• The chance to preserve and develop specialist finishing skills within an internationally recognised brand.• A highly visible role with significant autonomy and long-term career potential.

Groundworker / Installation Operative £34,000 - £40,000 + Overtime + Training + Progression + Benefits Hayes, Middlesex (Commutable from: Uxbridge, Slough, West Drayton, Hounslow, Feltham and surrounding areas) \n Are you from a groundworks/civils background, looking to join a specialist manufacturer who will offer hands on training, future progression, and plenty of overtime to boost earnings? \n On offer is an excellent opportunity to join a leading company who have a fantastic reputation for looking after their staff, supporting their careers with ongoing training, development opportunities, and a fantastic earning potential. \n The company are at the forefront of their industry, and have an excellent reputation amongst their customers. Due to their continued growth, they are looking to add to their close-knit field team. \n In this days-based role, you will travel to various sites around London, and carry out the installation, assembly and maintenance of bus shelters, and other street furniture. There will be occasional overnight work required in the role. \n This role would suit candidates from a civils/groundworks background, looking for a role offering training, progression, and overtime to boost earnings. \n The Role: - Installation Operative - Installation & assembly of bus shelters, and other street furniture - Monday to Friday (06:00 to 14:30) + Overtime + Occasional overnight work \n The Person: - Experienced in groundworks, civil excavations, or engineering - Full UK Driving License - CSCS card or NRSWA qualification \n Job Reference Number: 277732 \n To apply for this role or to be considered for further roles, please click "Apply Now" or contact [Jack Banks] at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.