Trabajos nations en BoltonCrear alertas

Bolton An opportunity has arisen within our Customer Support business area for a number of Integrated Logistic Support Managers to ensure our ability to support our next generation Missile systems to our worldwide customer base. These opportunities will give you considerable scope to improve programme management skills, develop Customer facing skills and promote your profile internationally within MBDA. Salary: Circa £65,000 depending on experience Location: Stevenage, Bristol or Bolton Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunities Possible Relocation AvailableThe opportunity: An opportunity has arisen within our Customer Support business area for a number of Integrated Logistic Support Managers to ensure our ability to support our next generation Missile systems to our worldwide customer base. These opportunities will give you considerable scope to improve programme management skills, develop Customer facing skills and promote your profile internationally within MBDA. What we're looking for from you: ILS Experience essential A broad based engineering background, a degree level qualification in a numerate / technical discipline would be beneficial, with knowledge and experience of Weapon Systems support models Understanding of predictive logistics models Prioritisation and ability to deal with multiple issues on a regular basis Strategic planning of support work, from supply chain through to customer deliveryOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

An exciting opportunity for an experienced Electrical Fitter to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This opportunity is for an Electrical Fitter to join the Manufacturing team supporting assembly and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are manufactured in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An exciting opportunity for an Inspector to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment, Ideally Electrical & Mechanical Skilled but predominantly in an Electrical biased area. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This opportunity is for a Inspector (Electrical biased) to join the Manufacturing team supporting inspection and certification of a variety of mechanical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds have been manufactured in accordance with drawing requirements and specifications and are free from damage; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring any non-conformances are processed and controlled correctly; Ensuring that all manufacturing documentation is complete and carries the necessary certifications; Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical or Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical or Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical or Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved Practiced in reading and understanding assembly drawings and planning instructions Practiced in the inspection of mechanical hardware including damage and build integrity Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

As part of MBDA's continual volume growth and operational expansion, you could join our highly technical manufacturing environment as a Manufacturing Operations Manager with a pivotal role in shaping operational performance ensuring the delivery of complex, critical defence programmes. Additionally, having the knowledge, skills and personal drive to lead multi-functional groups to evolve our ways of operating towards a future state of manufacturing excellence. Salary: Circa £70,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The Opportunity This role is ideally suited to a proven manufacturing leader ready to take on the broader challenge of delivering our volume growth across complex, critical defence programmes. You will lead and shape multi-functional teams, evolving our ways of operating and embedding best practices across manufacturing operations. A key focus will be fostering a strong continuous improvement culture that drives performance, builds capability and ensures the achievement and sustainment of manufacturing excellence. You could find yourself leading the growth of a high-volume production programme or leading the transition of complex systems into stable, repeatable manufacturing, whilst continuing to mature production operations by influencing the team and help shape the future. What's in it for you? Lead and shape the manufacture, assembly, integration, and test of complex aerospace and defence systems. Operate at the forefront of manufacturing excellence, quality transformation, and operational improvement. Influence decision-making and outcomes at senior leadership level. Develop your leadership capability within a business committed to continuous improvement and developing its people. Identify improvements to our existing manufacturing and lead multi-functional groups and evolve our ways of operating. Gain exposure to major operational challenges, including ramp-up of new programmes, stabilising transitioning production lines, industrialisation of new systems, and improving established manufacturing flows. Benefit from clear progression opportunities into Head of Manufacturing or wider senior leadership roles for high performers.This is a rare opportunity to build botha legacy of operational impact and a long-term leadership careerwithin one of the UK's foremost advanced manufacturing organisations. What we're looking for from you You will bring: Proven experience as an Operations, Production or Manufacturing Manager within a complex, regulated manufacturing environment (aerospace, defence, automotive or similar) Demonstrated leadership of multidisciplinary teams with a strong track record of delivery against safety, quality, cost and schedule objectives. Experience leading production ramp-up, industrialisation, of new products t or stabilisation of transitioning manufacturing lines. Capability to drive continuous improvement, whilst utilising and implementing a variety of lean tools ensuring successful implementation and change management. Strong leadership skills that ensure accountability and ownership at all levels. Being forthcoming with new ideas and better ways of working that means we challenge the norm in a proactive and inclusive manner. Strong stakeholder engagement skills, operating confidently across engineering, quality and project teams.Qualifications - desirable Degree or equivalent qualification in Manufacturing, Engineering, or a related discipline Lean / Continuous Improvement certification (e.g. green Belt / Black Belt) IOSH or relevant health and safety qualification Experience operating within aerospace or defence quality framework (e.g. EN9100)Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

We have an exciting opportunity for an experienced Electronic Design Engineer to join our team and play a leading role in the support of production activities at our state of the art manufacturing facilities. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: You will act as part of the design team as one of the main interfaces to our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Working within design support is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of these products to deliver support to our customers. What we're looking for from you: You'll need to demonstrate a number of the following attributes: · Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. · Proven experience in the design of the following disciplines:- · Analogue and Digital Electronics · Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. · Someone who will be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. · Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. · Experience in a manufacturing environment and supporting and resolving manufacturing issues and a view to implement Design for Manufacture improvements into the design. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton An exciting role has become available in our Test Architect team as a Technical expert involved in all aspects of the Missile Test process. If you have experience Electronic circuit design, testing and failure analysis techniques along with Test equipment design then this could be just the role for you! Salary: Circa £72 ,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car allowance: £300 per month Pension: maximum total (employer and employee) contribution of up to 14% Private Medical Insurance Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As the Missile Test and Testability Expert you will be reporting in to the Test and Testability Department Head and, from a Project perspective, into the Project Chief Design Engineer. As Test and Testability Architects (TTA), we are involved in all aspects of the Missile Test process - from the early feasibility studies to series production and in-service support. As a Subject Matter Expert for Missile Test and Testability Architecture you will participate in range of missile programmes using your experience and expertise to improve the definition of test equipment technical requirements by focussing on key areas and removing waste. You'll be managing definition of the project test strategy, Definition of Project BIT architecture including coverage requirements and improving the way we write our specifications across all projects. As a key member on the team you'll be assessing and recommending improvements to our ways of working across TTA and lead the analysis of production test data to spot trends and diagnose failures. There will also be a need for you to lead the analysis and modelling our system to understand the test coverage and generate diagnostic instructions. Day to day you could also be involved in - Participating and supporting Red-Team reviews and activities into critical issues during development and manufacture. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Mentor and actively support members of the Test & Testability department. Lead / participate in roadmap development activities.What we're looking for from you: Educated to degree level (or equivalent) with significant experience of electronic test at all stages of project lifecycle, including: Electronic circuit design, testing and failure analysis techniques. Test equipment design. Experience in requirements capture. Project management and planning. Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Experience in DfT and testability Proven ability to influence senior stakeholders within the business relating to technical direction Support departmental strategy and support the department head with recruitment of the right people into the team. Strong interpersonal and well developed communication skills (written & verbal).Willingness to travel when required (UK and EU). Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

Bolton This is an exciting opportunity to lead Component Obsolescence and shape your vision of the service. You will work with a wide range of stakeholders across a suite of products providing advice on best practice, guidance and support. Salary: Up to £52k depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: The growing workload within MBDA and increased volatility in all commodity markets, especially the electronics industry, has created an exciting opportunity within our UK Component Engineering Team for an Obsolescence Manager to review, develop and maintain our compliance processes within the Team. Using your expertise, you will manage the pro-active and reactive obsolescence status of thousands of components that are used in our missile and support equipment designs, supporting our customers to manage identified challenges within their designs. A team of Component Engineers are available to assist in the collection of all related data using their relationship with all of our suppliers. Working alongside this team, you will be responsible for both regular and ad hoc reporting on obsolescence component statuses. As the Obsolescence Manager you will be in a unique position where you will have regular contact with all Missile and Equipment Teams, Equipment Centres of Excellence and the Missile Portfolio Group. You will use this to influence the use of correct, coordinated and robust Obsolescence Management across the Company. You will maintain your expertise in obsolescence areas and ensure that this expertise is effectively passed to others, including participating in design reviews, training and other development activities, as appropriate, enabling MBDA to maintain its capability. There is also the opportunity to support and lead international obsolescence initiatives, helping define best practice and manage the adoption and adherence of agreed methodologies across the teams on an international scale. What we're looking for from you: Knowledge and experience with obsolescence management, tools and techniques. Experience or knowledge around the requirements of BS 62402:2001. Excellent communication skills to facilitate regular face to face and electronic communications with all relevant stakeholders. The ability to write clear and concise engineering documentation.Nice to have: Knowledge / experience of tools such as Matrix PLM, SAP, Silicon Expert, IHS etcOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunitiesThe opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton We are looking for an experienced SAP architect and project manager to support our SAP transformation, delivering new and existing capabilities and to ensure the smooth operation and sustainability of these systems for years to come. Salary: Up to £70,000 depending on experience Dynamic (hybrid) working: 1-2 days per week on-site; depending of the phase of the project, more days on site will be required Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: We are working on a transformation programme to move from our current SAP ECC6 systems to SAP S/4HANA across the MBDA Group, utilising a Greenfield methodology. This strategy will impact a number of domain areas and the implementation of S/4HANA providing an opportunity for each domain to review its use of existing tools and determine a roadmap for consolidation across the Group and deliver the best-in-class tools for our business users. This role will concentrate on the local deployment of the new S/4HANA systems and post-go-live operations and maintenance. Additionally, the role will support the structured handover and manage any additional tasks related to the existing ECC6 environments. This role falls within the Digital Solutions (DS) area of MBDA; part of Digital Excellence (DEx), the DS team focusses on delivering IT solutions that are used to support the business in a variety of domains. What we're looking for from you: Proven expertise in SAP architecture design and implementation. Deep knowledge of integration frameworks. SAP Architect experience - being able to run productions systems, monitor and support an SAP transformation project. To follow and perform the SAP Release Management for the new systems in UK network based on the core model designed at group level. A track record of governing technical standards, ensuring scalability, security, and compliance. Strong stakeholder management skills, able to bridge business and IT with clear communication and strategic vision. Experienced in vendor and partner collaboration.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

We are seeking an experienced and highly motivated individual to join the Quality Assurance team in Bolton, providing support to both the Manufacturing and Supply Chain teams. Salary: Circa £60,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity? Are you a Quality professional with a passion for problem solving? Working with our Manufacturing & Supply Chain teams you will lead the Quality Assurance activities on one of our complex Weapon System production lines, thereby supporting delivery of UK strategic defence needs. Co-ordinate delivery of the Quality Assurance activities across the Manufacturing Business Units to reduce production programme quality risks. Timely resolution of production line issues, by leading multi-functional teams through application of industry standard problem solving tools and techniques. Lead delivery of assurance activities associated with industrialisation of our production lines. Identify and mitigate production risks through implementation of PFMEA's, Control Plans, Special Process validation, etc. Lead Project Manufacturing Non-Conformance Panels, escalating critical issues to senior management. Ensure implementation of any Project specific non-conformance processes within manufacturing. Conduct non-conformance data analysis to identify trends, root causes and opportunities for improvement. Primary interface to Customer for project contractual deliverables out of our Bolton production facility. Additional role responsibilities: Support the Project team in developing cost effective project planning to assist in on time delivery of all contractual deliverables, whilst meeting MBDA policy and process. Collaborate with the engineering and manufacturing teams to optimise the manufacturing processes. Support the delivery of Product Life Cycle Gate reviews, providing assurance of deliverables and ensuring timely closure of actions. Provide Quality reporting into Project, Manufacturing and Functional Programme Reviews. Drive the Quality culture within the Manufacturing domain to ensure continuous improvement and delivery of the quality strategy and risk assessments. Certify and release product to our customer in accordance with the contractual requirements. What we're looking for from you: Preferably degree educated, or substantial experience in Quality Management Practitioner of current QA problem solving methods (8D, Six Sigma, DMAIC, etc.) Good working knowledge of Microsoft Office packages (PowerPoint, Word and Excel) Excellent interpersonal skills are essential and able to influence others in a collaborative way. Highly self-motivated, and demonstrate a determination and persistence to deliver results despite obstacles and setbacks. Position is based at our Bolton site, but will require provision of support at our other MBDA sites. Some travel (both UK and international) maybe required. What's in it for you? The role provides an exciting opportunity to work in a high technology environment ranging from the manufacture of CCA assemblies through to live build of Weapon Systems. What's great about the team? Join a collaborative and supportive team who work together to contribute to a shared ambition to deliver for our Armed Forces and preserve the company's reputation as the leading provider of Missile and Weapon Systems. Achieve all this while maintaining your work/life balance!! Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

Bolton Join the Capability, Knowledge & Skills (CK&S) team within the Technical Excellence Directorate, providing an excellent opportunity to gain experience in project coordination and stakeholder engagement, to drive capability and skills improvement across the Technical organisation. Salary: Circa £41,000depending on experience Dynamic (Hybrid) working: The success of this role is dependent on building effective networks and relationships. As such, we require a minimum of three days a week on site with occasional UK and European travel. Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: As the Project Co-ordinator (Capability, Skills & Knowledge) you'll be tasked with supporting the delivery of Capability, Knowledge and Skills improvement plans, working with a wide range of teams across international functions, helping to keep initiatives organised, on track, and well communicated. You'll collaborate closely with technical experts and stakeholders, supporting strategies and solutions that enhance current and future technical capabilities. This role is central to ensuring we continue to evolve, innovate, and deliver high-quality outcomes. The team are dynamic, focused and passionate about continuous improvement to enable efficient ways of working, driving efficiency and influencing positive change. This exciting challenge means you will get to work on improvement projects that shape the future technical capabilities at MBDA, collaborating with experts across international teams and have an opportunity to influence how technical excellence is delivered across the organisation. Key responsibilities: Deliver and support Capability, Knowledge & Skills improvement projects, ensuring effective governance, planning and execution Provide project management support, including reporting and milestone tracking, ensuring actions are delivered Help coordinate the Technical Expert Network, ensuring effective communication and engagement, and supporting Technical Expert training development Support the organisation of meetings and workshops, including preparing materials and capturing outputs Develop and maintain resources, guidance, and best-practice frameworks for functional management for capability, skills, knowledge management and technical libraries Support communication and stakeholder engagement plans across the CK&S team Contribute to continuous improvement initiatives, sharing best practice and driving consistency across the Technical directorate Maintain and update guidance documents, knowledge resources, and shared repositoriesWhat we're looking for from you: Experience working with engineering or technical teams, with the ability to translate requirements into structured plans Strong stakeholder management and networking skills, with the ability to build effective relationships across international functions A proven experience in identifying and implementing continuous improvement, knowledge management, skills and functional capability development initiatives Be a highly motivated individual able to work in a dynamic technical environment and deliver on multiple simultaneous projects, with a proactive mindset Be a strong communicator, both written and verbal, with experience producing reports, facilitating meetings and able to collaborate with the wider business, working across all levels in an organisation Highly proficient in creating dynamic reports, presentations and data analysis using Microsoft Office tools (e.g. PowerPoint, Excel, Word)Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1

We are seeking an experienced and highly motivated Principal Product Assurance Engineer to join the Quality Assurance team in Bolton, providing support to the Manufacturing teams. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4 - 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... The opportunity: Facilitating practical problem solving activities, determining root causes and the effective implementation of robust corrective actions using the relevant quality tools Carrying out of process audits, issuing non-conformances and facilitating root cause and corrective actions Frontline provision of non-conformance management supporting the manufacturing functions, including the administration of non-conformities and containment activities Collation and analysis of non-conformance data through the business tool, Google NLP, highlighting any adverse trends and risks to the business and highlighting opportunities for improvement. Managing customer concerns and escapes, dealing with Inter company facilities across Europe including France, Italy and Germany and external customers Managing inscapes between business units within manufacturing Interface with the programmes quality representative and the wider quality teams, sharing data packs and progression of non-conformities and improvements Approval of FAI's, C of C's and other product related documents where required Supporting the successful transfer of new products into manufacturing, verifying PFMEA's, Risk register actions and supporting Industrial Validation activities What we're looking for from you: Able to demonstrate relevant work experience ideally backed up with qualifications Demonstrate excellent analytical skills with the ability to use data to identify trends and drive improvements Electrical / electrical test experience would be an advantage Ability and confidence to report to all levels of the business Strong practical problem solving skills being able to lead and facilitate activities leading to improvements Good planning and organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives Highly self-motivated and demonstrate a determination and persistence to deliver results despite obstacles and setbacks Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-CT1

Bolton Have a direct impact on MBDA UK's external collaboration with its current and future Supply Chains, managing engagement with the UK Network of Trade Bodies, Trade Shows, Regional Defence & Security Clusters and Regional Aerospace Alliances to meet innovative suppliers. Salary: Up to £45,000 depending on experience Dynamic (hybrid) working: Working on-site and off-site at events as and when required to fulfil the role Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: To remain at the cutting edge MBDA UK needs to constantly develop, adapt and adopt new technologies. Working together with our current and future potential partners helps to develop concepts and deliver game-changing solutions. This role, reporting to the UK R&T (Research & Technology) Procurement Executive, is a key contributor to the success of embedding Open Innovation into all aspects of how we do procurement, ensuring we have the right levels of engagement with the UK Network, enabling MBDA UK to collaborate with our Supply Chain Partners, including SMEs, research partnerships & academia. You will actively support MBDA UK's reporting on and evidencing our progress with the UK Supply Chain, addressing Government policy and MOD focus on the UK Defence supply chain through vehicles such as the Social Value Act with Prime Contractors, the Governments Defence Industrial Strategy, MBDA's Portfolio Agreement with the MOD and the MOD SME Action Plan. As part of the MBDA UK R&T Partnership team you will work with colleagues across Procurement and all other functions of the business to identify opportunities for MBDA to collaborate in an Open Innovation manner. You will be the Key point of Contact for the MBDA UK Procurement Collaborate to Innovate (C2I) Open Innovation initiatives. As such the main skill required is management of people through external and internal relationships. Externally, you will assess suppliers you meet, manage the collection of their capability data and manage their expectations. The role will manage relationships with the UK Network ensuring MBDA UK is constantly reaching out to find new sovereign capability. Internally, the role is responsible for managing the delivery of all C2I events and initiatives, managing people from around MBDA UK to support these initiatives. As part of the external collaboration responsibilities you will be expected throughout the year to represent MBDA UK at various off-site events and trade shows which will require overnight stays. Some of these events you will have planned and you will attend as part of a team that you will manage and some you will attend individually. You will present on behalf of MBDA UK at events when required. As MBDA is a transnational company there will be some opportunities to travel internationally to support similar events. As the Key point of Contact for C2I, you will look to continuously improve the initiatives and deliver greater value for money year on year. You will use the data collected through the year to provide evidence internally and externally of the impact that Collaborate to Innovate is having for MBDA UK, e.g. new suppliers on boarded, work placed and money spent. The R&T Partnership team is part of MBDA UK's Procurement function, we look to find new capability from new and existing suppliers. As such we collaborate daily with a variety of different people internally and externally. This role is a key part in ensuring that we continue to search everywhere and provide opportunities to all types of organisations to talk to us and share their capabilities with us. Our impact has a direct link to the capabilities of our products which support our Armed Forces and their role in protecting our nations. What we're looking for from you: A passion for collaboration and innovation, working with people to deliver change. Experience in delivering value from managing and planning collaborative events. A confident team player who can deliver results through skilful collaboration. Experience in managing data to evidence impact. Commitment to lead by example, proactively addressing challenges to deliver success. The drive and enthusiasm to keep searching for suppliers with disruptive technologies and innovations.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-LA1

This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton An exciting opportunity within Component Engineering team to help shape and play an important part in support across the business. No two days are the same supporting a large network of teams within the business. Salary: Circa £ 48,000 depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As MBDAs mission to stay at the forefront for Electronics, Electrical, Mechanical & Materials commodities an exciting opportunity has arisen to join our Components team and lend your expertise. You will play a critical role in managing Electronic Components, assessing market trends and technical risks. The role demands a passionate professional who can lead in an Electronics or RF semiconductor specialism. The role requires technical advisement to a large amount of stakeholders across the business from Projects, Engineering teams, Procurement, Customer Service Support and many more. You will be accountable for providing Technical advice and reporting on risks, working with suppliers and understanding the needs within MBDA to suit the requirement of our ever-evolving business needs. As the Principal Electrical Component Engineer, you will maintain your expertise in specialist areas and ensure that this expertise is effectively passed to others, including participating in design reviews, training and other development activities, as appropriate, enabling MBDA to maintain its capability. There is also the opportunity to support and lead international collaboration within the company, helping define best practice and manage the adoption and adherence of agreed methodologies The Component Engineering team you will be a part of has been vital to our product delivery by providing highly sought after subject matter expertise when it comes to the individual's relevant commodity experience. The team operates from both Stevenage and Bolton sites, representing a diverse group of friendly supportive colleagues who pull together when needed to achieve our mission. What we're looking for Knowledge or experience within an electronic component discipline. Knowledge of electronic suppliers especially in semi-conductors Appreciation of REACH and RoHS regulations. Strong communication skills both written and verbal. Pro-activeness and self-motivation to improve self, improve process, and get the job done. It would be advantageous if the candidate has worked in supply chain and knowledge of Electrical and electro-mechanical products. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a key role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Salary: Up to £43,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a key role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of Electronics. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can also help to shape the design of the products and test equipment, delivering support to our customers What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Someone who has a record of accomplishment of on-time delivery Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions.Proven design experience in one or all of the following disciplines:- Digital & Analogue Electronics Power Electronics RF and Antenna Design Interconnects Safety Electronics RF Test and measurement principle knowledge Test SystemsOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

An exciting opportunity for an experienced Manufacturing Test Engineer to join our Circuit card assembly Engineering team. This is a fast-paced but friendly and inclusive Manufacturing environment that will challenge you Salary: Circa £45,500 depending on experience Dynamic (hybrid) working: 4 or 5 days per week on-site due to workload classification Security Clearance: British National Only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As part of our continued growth, we are looking for a highly skilled and methodical Electronics Manufacturing Test Engineer to join our Circuit Card Assembly team. In this critical role, you will specialise in diagnosing faults on PCB assemblies down to component level. Your expertise will be crucial in accurately identifying root causes of failure, providing technical reports and supporting the implementation of corrective actions, which in turn will be utilised to improve production yield and ensure programme targets are achieved. You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to time served experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. Key Responsibilities: Technical Root Cause Analysis:Performing fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc. Test Specification/Instruction Generation:Supporting the introduction of new test facilities by generating test specifications, operator instructions, and maintaining appropriate configuration control. Cross-Functional Collaboration:Serving as a key point of contact, collaborating closely with Manufacturing, Quality, Process, Design Engineers, and other stakeholders to overcome technical challenges and drive product improvements. Design & Development Support:Providing crucial Test Engineering input during the design and development phases, from initial concept through to Production Readiness Reviews.What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 AND Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject)OR BEng/BSc in relevant Engineering/Technical Degree Expertise in Electronics Test & Diagnosis:A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Test Equipment Experience:Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Manufacturing Systems Proficiency:Familiarity with enterprise resource planning, manufacturing execution and version control system tools (e.g., SAP, MES, PLM) for logging test activities and generating non-conformance quality reports. Desirable Experience working with RF-based circuitry would be preferable, but is not mandatory.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton Join the Land Ceptor team and work to support the British Army in realising the full potential of its latest Ground Based Air Defence capability and tailoring this capability for the needs of emerging export customers. In either case, you'll be building on world-class design: incorporating new ideas, functionality and technology to deliver to our customers. Salary: Circa £48,000-£53,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: As part of the Physical Systems Design & Certification team, you will help manage the overall physical functionality and certification of the in-service system while supporting the evolution of the weapon system for future customers. What we're looking for from you: A highly motivated self-starter who can work both independently and as part of a team on a number of varied tasks A good understanding of systems engineering principles, processes and practices An appreciation of requirements engineering at System, Subsystem or Component level Knowledge associated with the design and build of hardware Awareness of test procedures required to verify products and the gathering of evidence to enable certification (experience working with defence standards, Mil Spec, etc. ideal, especially environmental and EMC) Experience preparing and conducting ground trials and gathering evidence from physical activities would be advantageous Confidence in presenting technical engineering information and promoting decision making Experience of technical report writing and use of configuration management tools A Logical approach to problem solvingWhat's in it for you? The opportunity to be instrumental in the evolution of the Land Ceptor system for both UK and export customers The ability to grow your career within a wide engineering sphere with an exposure to all stages of the engineering product lifecycle A challenging and varied scope of work with a good mix of short and long term objectives Opportunities for short term UK and European travel You will be responsible for defining, reporting and managing the workload in this areaOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

Bolton This role offers a fantastic opportunity to broaden your interpersonal and technical skills whilst working on complex and varied projects. You'll be working with highly talented and motivated colleagues in a friendly and supportive environment whilst enabling your personal and professional development! Salary: Circa £55,000 depending on experience Location: Stevenage or Bolton sites (We may be able to offer a relocation package for this role) Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: Our PCB Layout team is responsible for providing a full PCB Layout Service to all Internal Programmes. These span all technologies from PTH boards to complex multilayer, rigid/flexi-rigid, surface mount, impedance matched, RF etc. This is a unique and exciting opportunity to develop your technical skills across our broad range of products. You'll be working closely with engineers and PCB suppliers developing complex PCB Layouts based on technical requirements (electrical, mechanical, thermal and environmental). This can entail developing and adapting emerging technologies to meet our high reliability requirements, whilst maintaining a high production yield, delivered on time, on cost, on quality. You'll also mentor and participate in knowledge sharing with other team members playing an active role in their own and your development. Should you wish to be based out of our Bolton site, regular travel to our Stevenage site will be required to meet with our design team, project designers and fulfil your training needs. This is an essential requirement. What we're looking for from you: Extensive/specialist experience in one or more areas such as RF/High speed/Analogue/Power/SI or EMC Good negotiation and influencing skills to ensure design requirements are suitable for production processes Ability to lead and support design reviews as well as new technology introductions both national and international. Substantial knowledge and experience of PCB design and best practices for PCB layout for high reliability products. Substantial knowledge of PCB fabrication processes and technologies (materials, stack-ups etc.) Strong communication skills to facilitate regular face-to-face and electronic communications with all relevant stakeholders including our international partners.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

We're looking for a highly motivated individual to join our Manufacturing New Business Bid Team. Supporting both the Design (New Concept) & Manufacture (Series Production) phases of bidding, across MBDA's full range of programmes and projects. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 1-2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: To join a dynamic, forward thinking bid team, focusing on complex New Business D&M-Phase bid generation. This is a unique opportunity to build a strong stakeholder management network covering all of Manufacturing Programmes, projects and for all products. In this role your main focus will include interpreting bid directives, cost modelling, utilising multiple data sources and creating 3-point estimations. You will have the ability to perform advanced data analytics to inform bid content, applying robust methodologies with strong commercial acumen and a focus on Risk and AED's. Experience in generating an auditable manufacturing cost base for bids in D&M Phase or similar is desirable and excellent presentation skills are required as all bids are presented to the Senior Management Team (SMT) for approval. This role will require a resilience in delivering to demanding timescales and priorities. The team has grown in recent years evolving the process of generating cost models by introducing new methodologies and enhancements to how a bid is populated. By ensuring each bid is auditable, with tangible source data and fresh ideas. We welcome your ideas to help our continuous improvement to support bidding excellence. The position has become available due to a significant increase in both D & M-Phase Bidding activity, with the need to grow the team further in the generation of compliant complex bids on Major Programmes working closely with our Manufacturing Programmes team, in a collaborative, high-performing environment. What we're looking for from you: Experience working on complex bids with a proven record of accomplishment in the creation of auditable cost models, proposals and bids Commercially astute as working with cost models to generate costings for direct/in directs, materials and other costs associated with manufacturing of products Experience in the defence industry, particularly working on bids in Concept/Development phase through to Manufacturing phase would be advantageous An enthusiastic and driven individual, bringing tenacity and resilience to overcome challenges and deliver consistently strong bids Excellent communication skills, as the Bid Team work across all programmes, there are a lot of stakeholders and it is important to create own networks and build strong relationships experience of working within multi-functional teams Ability to work unsupervised and as part of a team, with a proactive approach Ability to articulate theory that has been applied to a costing approach and ensure evidence is collated for audit purposesOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Join a new small team at MBDA Bolton and become an expert in the field of Flying Probe Manufacturing Data Analysis, developing your skills and shaping the future of circuit card manufacturing in MBDA UK. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to on-site equipment location. Security Clearance: British Citizen. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This is a newly developed team, working to transform the way that defects are located and corrected within Circuit Card Assembly manufacturing, utilising state-of-the-art Flying Probe test equipment to find faults fast and improve the fault investigation process for the test engineering teams. We are looking for a motivated and organised individual, who can work effectively both independently or as part of a wider team. A background in Electronic Engineering, alongside attention to detail and a methodical approach to test development are essential skills for the role. Any existing knowledge of Flying Probe systems (specifically SPEA systems) is welcomed but not essential. You will work alongside experienced manufacturing test engineers and deliver new Flying Probe test packages for the circuit cards created at MBDA's complex technologies site in Bolton. Other aspects of the job involve delivering timely test package corrections and working on improvements to test time, test coverage and reliability of the Flying Probe systems. Additionally, there is also scope within the role to develop your skills as a test engineer, working with the existing test engineering teams to diagnose faults down to component level and suggest remedial actions to ensure the high quality of our products is maintained. MBDA Bolton is a friendly and inclusive manufacturing environment, with full training provided and wealth of knowledge and benefits within the business that will enable you to thrive at MBDA. Key Responsibilities: Creation of new Flying Probe test packages: Using the SPEA 4050S2 test system, you will follow a well-documented development process, starting from an initial circuit card data-pack, through the import to Flying Probe, debugging of tests and statistical data analysis of results. This concludes with a reliable and robust test package that can be deployed to the manufacturing operations team to use. Correction and improvement of existing Flying Probe test packages: As our products evolve and updates are released, we are required to update and improve the existing test packages to accommodate any changes. Another responsibility will be improving the yield on our deployed test packages, by running statistical analysis on test results and making changes accordingly. Communication with stakeholders and cross-team working: As part of investigations and cross-team working, you will perform fault diagnosis down to component level on analogue and digital PCB assemblies using a wide range of both automated and manual test equipment including oscilloscopes, multi-meters, signal generators, etc.What we're looking for from you: A Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and a Formal further education certificate to Level 4 (HNC or equivalent in a relevant subject). OR A BEng/BSc in relevant Engineering/Technical Degree. Key Skills Expertise in Electronics Test & Diagnosis: A strong theoretical and practical understanding of electrical/electronic measurement and test principles, test equipment and fault diagnosis techniques for electronic sub-assemblies and PCBs. Engineering Documentation Experience: An ability to interpret detailed schematics, drawings and test related documentation. Experience writing operator instructions and engineering manuals is desirable but not required. Test Equipment Experience: Hands-on experience using both manual and automated test equipment, preferably within a defence or similar high-reliability manufacturing environment. Flying Probe Systems Experience and Expertise (Desired but not required): Familiarity with Flying Probe development and debugging, including guarding methods, probe allocation and development principals.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Are you interested in the industrialisation of a Manufacturing Architecture, inspection and test plan, if so this role may be suitable for you. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 3 or 4days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: The Principal Manufacturing Engineer - Industrialisation is responsible for developing a manufacturing system and process, alongside the creation of manufacturing and test instructions, FMEA's and Phase Gate reviews, with various technical aspects of Manufacturing. This will involve leading continuous improvement activities, preparation for IVM & VMS certification, risk aversion strategies and efficient non-conformance management methodologies to align with team priorities. The opportunity will also allow you to grow your knowledge within manufacturing as part of development into future opportunities. Industrial Validation, manufacturing architecture and factory of the future principles are some of the work packages that provide stretched objectives for such growth. Develop manufacturing systems and processes in response to the defined Manufacturing Architecture and the Manufacturing, Inspection and Test Plan. Creation and approval of manufacturing and test instruction documentation. Process FMEA and process capability proving. Lead Industrialisation aspects of Product Gate Reviews Oversee obsolescence from a manufacturing Business unit perspective Lead Spiral Development activities for Business unit / Project Lead and support Continuous Improvement initiatives to ensure the area of responsibility is continually developing to improve efficiency. Lead business unit Rate increases requirements. Support the Manufacturing Engineering Manager during the preparation and proving of the Production System for IVM & VMS certification Risk identification and aversion strategies associated with technical definition and manufacturing methodologies. Development, maintain and control technical interfaces to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues. Effective Non-Conformance management and corrective action. Manufacturing focal point at key meetings to report progress of Engineering actions and align team with programme priorities.What we're looking for from you: Degree/HND level of qualifications or equivalent in a relevant subject Experience of the product development lifecycle in an electronics environment. Sound awareness of PLC2. Good Manufacturing knowledge achieved through experience and understanding of industry best practice. Ability to influence across a team of functional professionals. Budgetary management trained.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An opportunity has arisen for an experienced Manufacturing Electronics Engineer to join our manufacturing team in Bolton. Fantastic opportunity to support across all stages of product assembly Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We are seeking an Electronics Engineer to service Electrical and Electronic Test Equipment, including Special to Type Test Equipment (STTE).The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business. These tasks include supporting routine calibrations, commissioning, drift analysis, fault finding and repair of test equipment. You will be working within an experienced team of Engineers supporting complex test platforms in the manufacture and test of complex missile systems. You will be trained to calibrate and support special to type factory test equipment using a range of technologies, DC to Microwave. Annual reviews assess and plan any future development opportunities and needs to widen your overall engineering knowledge. Teamwork and knowledge sharing is an essential part of the team ethos as is the understanding of workload and throughput achievements. What we're looking for from you: HNC/HND with relevant experience Experience and knowledge in the calibration of test equipment and maintenance of test systems to component level. Able to utilise instructions, handbooks, drawings or specifications to provide technical advice/guidance. Able to use this information to conduct appropriate measurements and repairs down to component level. Good understanding of calibration principles and processes. Able to mentor other or more junior staff when requested by line manager. Able to deal with multiple issues, tasks and priorities concurrently. Analytical and problem solving skills. Good communication skills with the ability to tailor communication to the relevant audience. A good understanding of SAP would be desirable. Experience of working on Environmental Chambers an advantage.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton Are you passionate about executing and managing critical and complex supplier subcontracts? Do you have experience of providing work collaboratively with UK and/or international suppliers whilst protecting the commercial position? Salary: Circa £ 48,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: Working within Major Equipment Procurement (MEP), you will partner with our suppliers around the world and enable MBDA to provide world-leading defence capabilities for our Home Nations and their Allies. You will lead the preparation, negotiation, implementation and performance of subcontracts across the entire life cycle of missiles and missile systems. You will ensure that contracts are effectively managed to time, cost, and quality resulting in the delivery of high value and sophisticated sub-systems. You will need to provide commercial guidance to internal customers and manage risk and opportunity to safeguard the interests of MBDA. Key activities on a day-to-day basis can vary between individual roles, but expected activities you are likely to complete: Preparation and execution of subcontracts, either with existing partners or as a result of running tendering activities Oversee subcontract amendments to ensure they remain topical and in compliance with latest contracting standards and legislation Undertaking performance management activities to ensure that suppliers deliver in line with subcontract obligations Develop and nurture strong supplier relationships with suppliers within the UK, Europe and the rest of the world Identify and mitigate commercial and business risks relating to the suppliers which you are responsible for Obtain quotations and other critical intelligence from suppliers which enable MBDA to bid for new businessWhat we're looking for from you: MEP provides a collaborative, team-focused environment where multitasking is a key skill. This is a really key role, and we need people who can help us be successful by taking requirements and problem solving with tangible solutions. There will be ample opportunities for you to develop within the MEP team and across the wider procurement business. You will be required to travel to our suppliers in the UK, Europe and potentially internationally. You'll be keen to learn or bring experience in procurement subcontract management, e.g. negotiation, contract and terms and conditions Be able to problem solve daily and skilled at finding a resolution Keen to provide continuous support and co-operation to senior internal and external customers Continually improve opportunities, analyse situations and present possibilities, whilst balancing riskOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-LA1

An exciting new opportunity has become available within the Industrial Planning & Capability (IPC) area for a Principal Manufacturing Engineer to join the team. This position will be responsible to provide the Manufacturing Engineering focus and skill set within the IPC Team, to represent the department at various forums, to engage with many key stakeholders across the business and to promote the department. Salary: Circa £49,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: In this role you will support the continued growth of an essential team within Manufacturing Business Management and will enable an individual to grow their knowledge across all areas of manufacturing whilst operating at a strategic level within the organisation. The function of IPC is to review the future demand to ensure that the appropriate industrial planning and investments are completed so that MBDA can deliver against its commitments and to also develop IPC as a functional capability with effective tools and processes. You will lead the generation of IPC assessments that support manufacturing bids as well as scenario assessments. You will also work on the development of manufacturing capacity modelling across all business units and sites. The role will expand to support activities such as value stream mapping across the UK manufacturing systems, defining the process and governance around capacity modelling, supporting new business bids and future demand assessments. Develop manufacturing systems and processes in response to the defined Manufacturing Architecture and the Manufacturing, Inspection and Test Plan. Creation and approval of manufacturing and test instruction documentation. Process FMEA and process capability proving. Manage and report against own work programmes, including analysis of risk, to ensure work is delivered against accountabilities. Lead and support Continuous Improvement & Lean Manufacturing initiatives (e.g., Value Stream Mapping & Line Balancing) to ensure the area of responsibility is continually developing to improve efficiency. Creation and maintenance of manufacturing system capacity models Support the Industrial Planning & Capability Manager and the Manufacturing Engineering Managers during the preparation and proving of the Production System for IVM (Initial Validation of Manufacture) and VMS (Validated Manufacturing System) approval. Risk identification and aversion strategies associated with technical definition and manufacturing methodologies. Development, maintain and control technical interfaces to customers, suppliers and collaborators to ensure effective and swift resolution of technical issues. Effective Non-Conformance management and corrective action.What we're looking for from you: Formal technical Engineering/Craft Apprenticeship to NVQ Level 3 and Formal further education certificate to HNC or equivalent in a relevant subjectOR Degree in relevant Engineering subject Able to work with minimum supervision: Experience in engineering leadership / management. Experience in CI & Lean Manufacturing activities and tools Good Planning and Organising skills to ensure multiple tasks are prioritised and monitored to deliver set objectives. Negotiating and influencing skills. Analytical and problem-solving skills.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An exciting opportunity for an experienced Electrical Test Operator to join our Manufacturing Operations team in a fast-paced but friendly and inclusive Manufacturing environment. Salary: £42,558 Dynamic (hybrid) working: 5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for an Electrical Test Operator to join the Manufacturing team supporting test and certification of a variety of electrical hardware builds, ranging from small fixtures through to complex missile systems, during all phases of the product lifecycle. You will be providing operations support to ensure programme targets are met to agreed time, cost and quality requirements. Ensuring that completed hardware builds are tested in accordance with drawing requirements and specifications; Maintaining a safe working environment in-line with 5S policies Always aiming to deliver in line with all time, cost and quality requirements Ensuring assembly unit production costs are met Maintaining, to the highest level, workmanship standards and product quality Ensuring the completion of all manufacturing documentation Working closely with fellow Operators, Engineering and Quality to overcome any technical challenges and offer feedback for continuous improvement activitiesYou will be working with a large team of multi-disciplined operators in a fast-paced but friendly and inclusive Manufacturing environment. The team has a great mix of people, ranging from apprentices through to experienced skilled technicians, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Qualifications required (all of the below): Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) Practiced in reading and understanding assembly drawings and planning instructions Fully conversant with all Manufacturing equipment, tools and measuring instruments Uses their initiative and can work without close supervision Goes 'the extra mile' to get work finished to a high standard Flexibility and adaptabilityOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton This is a fantastic opportunity within the Digital Services and Solutions Procurement team to deliver Supplier Relationship Management (SRM) to the Digital Excellence team in the UK. The opportunity is to embed yourself within the Digital Services and Solutions Procurement team, a Domain of c. 30 people across the UK, France and Italy, covering key spend areas such as software (SaaS, Engineering & Manufacturing, Enterprise), Hardware, Services, Networks and Cyber. Salary: Circa £55,000 - £65,000 depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: This team forms part of a wider international Indirect Procurement team of c. 80 people. The UK Supplier n Relationship Manager in Digital Services and Solutions Procurement will be a trusted member of the management team and will be entrusted to focus on SRM delivery across this critical Domain, enabling and developing key supplier/stakeholder relationships and contracts. Our supply partners range from critical locally based service providers to international European or US software providers. The UK Supplier Relationship Manager will work closely with the Group Supplier Relationship Manager and manage the over-arching strategy for SRM with key target vendor and contract relationships, setting ownership, and developing key relationships in the UK. The successful candidate will communicate across wider Indirect Procurement to co-operate internationally, and help up-skill and empower our teams. What we're looking for from you: Senior procurement experience / SRM professional, MCIPS qualified or studying for MCIPS, with extensive experience of dealing with senior internal and external collaborators to board level. Able to lead and influence SRM strategies in differing contexts and services, preferably IT. Knowledge required of contracts and contract law, able to develop and draft SRM schedules, SLAs and critical metrics or performance schedules. Able to apply and carry out contract terms. Able to handle and develop contracts over the contract lifecycle ready for renewal or competition. Excellent written and communicating skills - able to lead independently and make recommendations on strategy. Excellent soft skills and emotional intelligence. A great teammate - ready to champion and mentor our teams, ensuring suppliers and stakeholders are positively engaged, seeking positive outcomes. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-LA1

This is a fantastic opportunity for an experienced Engineer to join our Production Design Support Test Equipment Team. You will play a key role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Salary: Up to 43k depending on experience Dynamic (hybrid) working: 2 days per week on-site Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Engineer to play a key role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our support teams and working alongside other support engineers to provide component selection and obsolescence support. The role offers the candidate a variety of engineering challenges, whilst providing scope for personal growth and development within Test Equipment. Working within Production Design Support (PDS) is a highly rewarding role working close to the manufacturing environment helping to shape the design of the products and test equipment, delivering support to our customers. What we're looking for from you: Ideally degree qualified (or equivalent industry experience) Experience of test product / systems and / or providing engineering support Experience in Selection of Components and awareness of REACH / RoHS Knowledge or Experience of Engineering change management and support Strong communication skills both written and verbal with an attention to detail Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton We have an opportunity working on behalf of UK Facilities Management, the Operational Technology (OT) Risk Manager will act as the deployed local security leader and expert in all elements of security for General Infrastructure Management Systems (GIMS) policy. Salary: Circa£60,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification and frequent travel to all sites across the UK Security Clearance: British Citizen or a Dual UK national with British citizenship/Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: The main focus is the creation, execution and maintenance of a framework to identify and address risks associated with the devices which support MBDA's Building and Infrastructure across the UK. This will also include input into the wider group structures as and when required. The OT Risk Manager will act as the point of contact for all new, existing and legacy GIMS installations, providing advice, guidance and direction to address the multiple security risks associated with them. This includes liaising with cross business teams outside of FM, such as Cyber and InfoSec, IM and Product Cyber. The OT Risk Manager will oversee all change management activities related to the connectivity and digital interfaces of the relevant infrastructure, ensuring all change remains appropriate and complaint with policy; ensuring an evidenced position is constantly maintained by MBDA UK of continued compliance with all relevant standards which may be subject no-notice audits by MBDA Group, MOD and other customers. They will deliver technical security consultancy to the business including architecture and solution suitability to meet a complex suite of business requirements. They will create and update ISO 27001 compliant policies to specifically address the GIMS policy ensuring that all policies, processes, procedures and technical infrastructure remains compliant with MBDA UKs wider ISO 27001 ISMS as well as other certifications as appropriate. The OT Risk Manager will be a critical leader in any new infrastructure projects within MBDA UK and for reducing cyber risk to the business as part of a wider team. The OT Risk Manager will also coordinate all technical security testing within their allocated area of operations, as well as maintaining upward reporting to MBDA UK FM Director, UK Security Director and UK CISO on results and remediation progressions. They will proactively coordinate with the Principle Cyber and Information Security Advisor for all required assurance activity and evidence based reporting. They will work with FM and wider business stakeholders to create a network of Asset Owners and formally document the asset registers for their areas of operation. What we're looking for from you: CISSP, InfoSec/Cyber Degree or equivalent (Essential) Experience or relevant certifications in network security or industrial control system hardening (Essential) Knowledge of security surrounding systems enabling critical services within business (ICS/SCADA/BMS/BEMS) Comfortable with establishing and maintaining relationships with national security authorities, internal stakeholders and industry partners. Expert in security concepts for IT network architectures, applications, cloud services and hardening of operating systems within ICS and SCADA context. Ability to present risk balanced security solutions to complex problems and provide clear advice directly to key stakeholders at all levels Experience of managing and developing inexperienced IT/FM Engineers to maintain security Experience of system accreditation processes and documentation. Experience of security risk management Knowledge of business IT processes and associated approval systems Expert knowledge of modern hacking Tactics, Techniques and Procedures including impacts affecting GIMS/ICS/SCADA. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-ST1

Bolton This is a unique opportunity for an experienced Electrical Architect to join the MBDA Weapon System Equipment team and work to support the delivery of a range of product capabilities for the needs of domestic and emerging export customers. You'll be working as part of a world-class design team to sustain and develop our products, both in-service and development: incorporating new ideas, functionality and technology to deliver to our customers. Salary: Up to £65k dependent on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: Your role will be to develop and define the electrical architecture and requirements of the equipment for all areas of the Weapon System solution, supporting analysis and decomposition to the lower-level sub-system elements and managing all technical elements of the Electrical Power and Control Equipment. Customer requirements in the Land and Maritime Domains will be challenging you to deliver within the constraints of limited physical space and harsh operating environments. Through your regular interaction with stakeholders and customers, using your communication, influencing and leadership skills you will be developing the product development demands with the delivery team, whilst focusing on the overall product picture to enable the 'On Time, On Cost, On Quality' of the technical solution. Maintaining an adaptable outlook in an ever-changing, competitive and challenging working environment will be an advantage. What we're looking for from you: The successful candidate will hold a qualification equivalent to or greater than a City & Guilds Level 3 award covering the requirements for Electrical Installations. Educated to HND Level 4 (or an equivalent qualification) will be advantageous and with appropriate experience, in electrical engineering, having obtained practical application knowledge in the following areas: Electrical Installation Design (in areas other than Building Regulations Part P), covering Extra Low and Low Voltages, and grounding/earthing, screening, and bonding schemes; Certification of installations in accordance with wiring regulations (BS 7671 or equivalent) - specifically for mobile or transportable systems; Design of electro-mechanical machinery and handling equipment in safety critical and complex electromagnetic environments; Platform and Vehicle based power supply, distribution, and management (civil or military); Design and implementation of "Uninterruptable" power systems (desirable); Hands on experience with electrical installations, machinery, testing of electrical installations, testing of equipment(s), trials work.An Electrical Architect within the Weapon System Equipment Capability team will be responsible for: Designing the initial electrical architecture for emergent and early lifecycle projects; Maintaining the electrical definition and requirements at later stages of the lifecycle, including production Delivering the technical and certification documentation, including safety related certification and UKCA/CE declaration; Supporting the functional integration of the hardware within the wider sub system definition; Promoting the wider capability definition of electrical architects within MBDA. Providing certification and sign off expertise for electrical architecture in projects delivered internally and to external customers at all project lifecycle phases;Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-KF1

MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. Salary:Up to £57,000 dependent on experience + bonus + benefits What we can offer you: Company bonus of up to £2,500 (based on company performance and will vary year to year) Pension of maximum total (employer and employee) contribution of up to 14% Paid overtime Up to 15 days flexi leave 25 days annual leave (plus holiday purchase) Possible relocation available Fantastic site facilities, including subsidised meals, free car parking and more Excellent career progression and development opportunitiesHybrid working pattern: Primarily office based (Bolton) with some opportunity for homeworking Want to be part of a successful team working to develop new and innovative seeker solutions to address complex customer requirements? Then keep reading .... The opportunity: An opportunity exists for a Electronic Engineer with broad based skills, including a strong background in RF engineering, to take a key role in the design support of seeker products being produced in our manufacturing facility based at Bolton. The Seeker Division designs and develops state of the art RF and Dual Mode (RF and IR) seekers for use in guided missile programmes. The role requires a high degree of enthusiasm and a determination to work autonomously to support the delivery of products to the right standard and within the required timescales. The role: Acting as a design team representative to interface with the design and manufacturing teams to transition a seeker from the development phase into series manufacture. Work with manufacturing on process and capability issues & support continuous improvement initiatives to maximise production yields. Support non-conformance management, dealing with design queries and advising on non-conformances where appropriate. Support manufacturing with internal and external suppliers. to aide the manufacturing team & ensure continuity of supply. Support obsolescence management by providing recommendations to the design team.What we're looking for from you: We are looking for an Electronic Engineer with the initiative and the determination to investigate and resolve production problems. A broad-based engineering background would be essential to the role and a detailed knowledge of RF assembly and test procedures would be advantageous. The successful applicant will be able to manage their own workload, interact well with both the design and manufacturing teams, work on project changes in a timely manner & maintain the production schedule. The team: The factory based Design Support Team assists with a variety of different seeker projects - no two working days will be the same! The Design Support Team interfaces with both the Stevenage design team & Bolton manufacturing teams, to help with highly technical problem solving. There are also strong relationships with external suppliers who provide sub-assemblies into the seeker build.Our Business: We respect new perspectives and experiences, and we value our collaborative ways of working. We are committed to growing and supporting diversity in our workforce and ensuring everyone has an equal opportunity to reach their potential. We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. We also welcome applicants who are looking for flexible working arrangements. Follow us on LinkedIn (MBDA), Twitter (@MBDAcareers), Instagram (lifeatMBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. Please Note: MBDA UK Limited requires all employees to achieve the required medical and national security clearance for their role. Further restrictions and/or limitations relating to nationality and/or rights to work may also apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. Due to the nature of our business, this particular vacancy requires the applicant as a minimum to be a British Citizen or a Dual UK national with British citizenship and capable of achieving the clearance levels mentioned above. #LI-SF1

This is a fantastic opportunity for an experienced Test Equipment Design Engineer to join our Production Design Support Team. You will play a leading role in a range of Engineering activities, providing Test Equipment design support to the Manufacturing organization and broadening your expertise in an international environment. An exciting career path awaits! Job Title: Test Equipment Design Engineer, Production Design Support Salary: Circa £48,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: We have a phenomenal opportunity for an experienced Test Equipment Design Engineer to play a leading role in the support of production activities with Production Design Support (PDS) at our site in Bolton. You will act as an integral interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. What we're looking for from you: Ideally degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring. Someone with a passion for innovation and collaboration. Experienced engineer who will be prepared to work autonomously if needed, leading the delivery of your work assignments and actively engaging with stakeholders to ensure successful delivery of your outputs. Solid experience of managing discreet work packages preparing bids, controlling costs and delivering solutions. Investigative skills to be able to find Root Causes of design related issues and propose robust corrective actions. Full Product Lifecycle knowledge or experience Willingness to provide support to and mentor other Engineers and Engineering Technicians.Proven experience in the design of one or more of the following disciplines:- RF and Antenna Design Electrical Architecture Design for Safety and Integrity RF Test and measurement principle knowledgeOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products. Salary: Circa £42,000-£48 , 000 depending on experience Location: Bolton Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: · Company bonus: Up to £2,500 (based on company performance and will vary year to year) · Pension: maximum total (employer and employee) contribution of up to 14% · Overtime: opportunity for paid overtime · Flexi Leave: Up to 15 additional days · Flexible working: We welcome applicants who are looking for flexible working arrangements · Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments · Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... . Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: • We are Electronic Engineering. We are growing, dedicated, and we work as a team to design & develop our advanced electronic solutions for MBDA products., • Your role as an Electronics Engineer is to develop electronic solutions for cutting-edge systems. This will mainly include; Design, qualification and certification activities across the whole product lifecycle for Land, Sea, and Air platforms, • This role offers various types work, challenges, and a multitude of applications; typically this includes: reviewing requirements; generating a concept solution, schematics, and manufacturing data packs; involvement in component & COTS (commercial off-the-shelf product) selection; design, test, qualify to meet high-reliability & harsh environments; technical report writing; involvement supporting investigations and our colleagues in manufacturing. You can work in our labs and get hands-on working on bread-board demonstrators through to flight standard hardware., • This is a fantastic opportunity to shadow our more experienced Electronics Engineers & Technical Leads, learn from them and the teams around you before leading your own projects and developing to a Senior Electronics Engineer or Tech Lead., • We respect new perspectives and experiences, and we value our collaborative ways of working.We are committed to growing and supporting diversity in our workforce and ensuring everyone has equal opportunity to reach their potential. We believe that any individual with a learning mindset and belief in what we docan make a difference here. What we're looking for from you: • We are looking for proactive individuals who are motivated to develop within their Senior Electronics Engineer role;, • Candidates would be ideally degree qualified (electronics engineering, science, physics) or HND equivalent experience, have been involved in development of electronics products, and ideally, have a background in complex electronics and working in a multi-functional team (e.g. with mechanical, firmware, and software)., • You will have a sound track record in electronic design capability throughout the product life cycle, i.e. early concept through to production; be organised with an eye for detail and a sense of pride in what you deliver., • Most important for us is that you have the right attitude and a passion to develop - we can offer the training and support you need to enable you to broaden your skills and experience and take steps towards senior roles and onwards. We offer a clear progression path and will give you support for career growth and development. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

This is a fantastic opportunity for an experienced Test Development Engineer, specialising in circuit card electronic test, to join our Test Development team. It is an exciting time as we begin work on a host of challenging, but rewarding projects, from concept design through to series production and full in-service support! Salary: Circa £ 43,000 depending on experience Dynamic (hybrid) working: 3-4 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: This is a fantastic opportunity for an experienced Test Development Engineer, specialising in Circuit Card electronic test, to join our Test Development team at our Bolton site. Working in an established team as a Test Development Engineer you'll be creating and maintaining small to medium-sized automated test systems. You'll be responsible for the development and implementation of test strategies and, where appropriate, influencing our product through 'Design for Test'. This involves creating test strategy documents, designing Interchangeable Test Adaptors (including both mechanical and electrical elements) and software development of automated test sequences in accordance with a test specification. You'll also have the opportunity to get involved with continuous improvement activities and the development of new technologies What we're looking for from you: Sound understanding of fundamental analogue and digital circuit design. Experience of creating and using technical documentation and Drawings i.e. Schematics, PCB layouts, Engineering Drawings. Significant experience creating Automated Test Equipment. Experience of using NI LabVIEW and/or TestStand preferable. Experience in Boundary Scan / XJTAG preferable. Strong problem solving skills with an exceptional eye for detail. Strong analytical skills and passion for driving continuous improvement, with six sigma experience desirable.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

Bolton We are seeking an experience SAP S/4HANA specialist and project manager to support our SAP transformation, delivering new and existing capabilities within the domain and to ensure delivery of the roadmap for the years ahead. Salary: Up to £70,000 depending on experience Dynamic (hybrid) working: 1-2 days per week on-site; depending of the phase of the project, more days on site will be required Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: We are working on a transformation programme to move from its current SAP ECC6 systems to SAP S/4HANA across the MBDA Group, with Greenfield methodology. This strategy will impact a number of domain areas and the implementation of S/4HANA will provide an opportunity for each domain to review its use of existing tools and determine a roadmap for consolidation across the Group and deliver the best-in-class tools for our business users. This role will focus on Product / SAP Global Trade Services (GTS) and you will support maintenance activities as well as supporting the related SAP S/4 modules. This role falls within the Digital Solutions (DS) area of MBDA; part of Digital Excellence (DEx), the DS team focusses on delivering IT solutions that are used to support the business in a variety of domains. Main responsibilities: Project management: IT responsibility for the successful implementation of our current S/4HANA Product-related modules (PLM for MBDA UK and SAP Global Trade Services (GTS)). Manage the planning, coordination and supervision of SAP projects, ensuring rigorous monitoring of the quality of the integrator's deliverables. To be the main point of contact between business teams and DEx teams (security, network, technical architect, back office...) During deployment of S/4 systems, to be the point of contact for the DS Procurement domain for the UK. To be in charge of related DS roadmaps for the MBDA UK. Business As Usual-BAU activities and optimisation: To be a DS point of contact to manage the anomalies and enhancements asked for by the key-users for the related modules and SAP GTS. To provide functional and technical support to key business users. Leadership and training: Lead and train local and international teams, to monitor the knowledge transfer sessions and reinforce DS capacities on the related SAP modules. What we're looking for from you: Deep knowledge in the areas of SAP PLM, including configuration activities, knowledge in other SAP modules as well as the setup of interfaces. Experience of integrations of SAP PLM with related systems and SAP GTS. Skills in SAP IT project management, with experience of leading multinational SAP projects. Hands on experience with data migration and master data governance activities. Experience of challenging third-party development teams to deliver against the strategy and finding a solution to deliver the business requirements. Experience with S/4 Hana will be an advantage. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

An opportunity has arisen for a Project Manager to join a dynamic and forward thinking manufacturing team to deliver complex manufacturing projects. Salary: Circa £45,000 depending on experience Dynamic (hybrid) working: 2-3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: An opportunity has arisen for a Project Manager to join a dynamic and forward thinking manufacturing team to deliver complex manufacturing projects within the Industrial Transfer Team. As a key member of the project management team you will have the opportunity to collaborate with other team members, challenge the norm and implement change within the organisation. The role will provide many stimulating challenges, personal development opportunities and the chance to work both with teams throughout the UK and internationally. What we're looking for from you: Accomplished Project Manager with a proven track record in the delivery of fixed cost programmes, within a matrix organisation. Able to operate effectively in a matrix or cross functional environment, interfacing and influencing customers and suppliers as well as briefing to senior management level. Experience of management of project scope, identifying deviations and negotiation of changes and their impact on the overall project. An eye for detail, able to identify risks and opportunity trends within in cost, schedule and quality data and able formulate plans in order to mitigate risk and deliver opportunities. Enthusiastic and pro-active individual who can prioritise objectives as well as managing the day-to-day tactical actions. Able to construct and maintain project plans and familiar with project planning software such as Primavera or Microsoft Project. Experience in the compilation of bid and estimates based on previous products or by working with design and engineering teams on new product definitions. Able to work collaboratively with stakeholders throughout the organisation. Good command of Microsoft packages including Excel and PowerPoint Experience within an engineering or production environment would be of preference. Knowledge and experience of production transfer projects Interface and Maintain a strong working relationship Manufacturing Industrial Transfer Engineers Act as the main point contact for Industrial Transfer projects for all stakeholdersOur company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Job Category: Social Care Qualified.Location: Civic Campus, Euclid Street, Swindon, SN1 2JG, United Kingdom.Must be able to attend the office 5 days during duty week (every 5 weeks) – 3 days when not on duty.Must have 3 years PQE in a permanent setting.Workers must reside more than 50 miles from S

Direct message the job poster from Four Nations Mortgages. At Four Nations Mortgages we have built a business to help you grow your business:. Referrals increase your chances of interviewing at Four Nations Mortgages by 2x.

Nations Recruitment is seeking an experienced Social Worker in the United Kingdom.

The Head of Policy and Integrity will sit within the Rugby Department at Six Nations Rugby Ltd and act as the primary point of contact for disciplinary, anti‑corruption, anti‑doping and all policy and integrity matters across all Six Nations and co‑owned competitions. This role will be central

Job Category: Social Care Qualified.Location: Holmeleigh, Foundry Street, Horncastle, Lincolnshire, LN96AQ.This is a full time office based role.One in Grantham and two in Horncastle/Louth.The Lead Child Protection Practitioner role focuses on improving consistency in CP practice, leading multi-agen

A leading sporting organization in Greater London is seeking a Head of Policy and Integrity to oversee compliance and integrity matters across competitions.This position requires collaboration with stakeholders, ensuring adherence to policies, and managing various integrity-related functions.The ide

Job Category: Social Care Non‑Qualified.Location: 20 Chelmsford Road, Leytonstone, E11 1BS, London Borough of Waltham Forest.To support the manager on day to day operations and development of the service in line with CQC standards.To assist the manager of the home in the management and administrat

We’ve been on the frontline of the world’s response to HIV and AIDS for over 25 years, working with marginalised people who are denied HIV prevention and treatment simply because of who they are and where they live.Set up in 1993 to work with community groups in the countries most affected by th

Nations Recruitment is seeking a Duty Social Worker to support Safeguarding Teams in Bridgwater, Somerset.

Now accepting applicants for Focus Group studies.Earn up to £700 per week part-time working from home.Must register to see if you qualify.No Administrative Assistant admin experience needed.Administrative Assistant Admin Work From Home - Part Time Remote Focus Group Panelists.Our company is seeking

Nations Recruitment is seeking a prosecution lawyer in Greater Lincolnshire for an immediate start.

Manage the full tenancy lifecycle including sign-ups, tenancy sustainment, and terminations.