Support engineer jobs in PeterboroughCreate job alerts

The Reliability Maintenance Engineering (RME) team at Amazon is fundamental to our operations – they’re the ones keeping vital machinery running at all times. As an RME Technician, you’ll maintain a wide range of equipment and workspaces while upholding Health and Safety best practices. You'll help to keep your colleagues safe and prevent machine downtime. Our RME Technicians boost the availability and quality of our equipment and work to enhance the operational environment too. Key job responsibilities • Proactive and preventative maintenance tasks on a wide range of site equipment, • Carry out reactive repairs and fault diagnosis in a live distribution warehouse, • Use the latest tools to maximise equipment effectiveness, • Uphold all health and safety policies and practices, • Support the development and progression of on-site apprentices, • Work on continuous improvement projects and roll out best practices across a range of EU sites A day in the life Our RME Technicians are based on-site, so they can respond quickly to any machinery issues. You’ll carry out a range of planned preventative maintenance to our sites’ equipment to make sure it’s working safely. As an RME Technician, you’ll also respond promptly to breakdowns, investigating, finding, and implementing solutions as quickly as possible. You’ll also make suggestions for long-term improvements. Working alongside senior colleagues, you’ll undertake day-to-day maintenance tasks and will liaise with contractors if you need external expertise. You’ll work on a range of shifts to make sure our sites are supported around the clock – allowing Amazon to deliver at the speed we’re known for. About the team Our Reliability Maintenance Engineering or RME team keep our equipment performing at its best. We're a technically minded team, made up of excellent team players and guided by experienced leaders. We work together to maintain, troubleshoot and repair equipment across our global network of fulfilment centres. Some of our people are leaders, who oversee the team as they work on exciting technology – some of which only exists at Amazon. From installing automated packaging systems to overseeing the general maintenance of a site to repairing key distribution equipment, our team handles most aspects of Amazon’s technical side. This includes keeping buildings legally compliant, so everyone is safe, and our sites are operating at maximum efficiency. There are lots of opportunities for progression, both within the RME team and more widely across Amazon. Everything we do focuses on reducing downtime in Amazon’s crucial operations sites, so customers get their orders on time. We often work during early or late hours to carry out maintenance with minimal disruption, including night shifts. If we spot a better way to do something, we have the skills and the opportunity to develop and introduce completely new processes or cutting-edge tech like Amazon Robotics and our Complex Item Sorter. • High school or equivalent diploma, • high school diploma or equivalent, • NVQ Level 3/ SVQ Level 3/ IVQ Level 3/ City & Guilds Level 3/EAL Level 3 all specialized in Mechanical, Electrical or Mechatronics, • 4 years UK certified apprenticeship, • NVQ Level 3 in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship, • SVQ Level 3 (or equivalent) in Mechanical, Electrical or Mechatronics, or completed a 4-year UK certified apprenticeship, • Work a flexible schedule/shift/work area, including weekends, nights, and/or holidays, • Work flexible schedules including weekends, nights, and holidays, • Served a full Engineering indentured apprenticeship and/or qualified to a minimum NVQ Level 3 or equivalent in a relevant Engineering subject, • Relevant experience as a qualified engineer, • Relevant experience working in mechanical and/or electrical maintenance, • Advanced proficiency in the local language verbally and in writing, • Associate's degree in Mechnical or Electrical, • Experience with material handling equipment (MHE) safety standards accordance with original equipment manufacturer (OEM) and safety standards, • Experience with robotic operation and maintenance, • Experience in condition-based monitoring, • Experience working with print and apply machines, • Experience in fault-finding and maintaining conveyor or automation systems Amazon is an equal opportunities employer. We believe passionately that employing a diverse workforce is central to our success. We make recruiting decisions based on your experience and skills. We value your passion to discover, invent, simplify and build. Protecting your privacy and the security of your data is a longstanding top priority for Amazon. Please consult our Privacy Notice (_) to know more about how we collect, use and transfer the personal data of our candidates. Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit _ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Trainee Coding Programme – No Experience Needed \n Future-proof your career in Coding – starting today. \n \n Looking for a career change? Maybe you’re already working but want a more technical role with better long-term prospects. Or you could be between jobs and ready for a fresh start in tech. \n The ITOL Recruit Coding Job Programme is designed to help you move into a high-demand coding role, even if you have no prior experience. \n Train online at your own pace and land your coding role in 1-3 months. \n Please note this is a training course and fees apply \n Job guaranteed - complete the programme and get a job or get your money back. \n Our candidates earn £28,000-£50,000. \n \n Step 1 -HTML and CSS Online Training (*12 weeks) \n The first step is completing a selection of professional and industry-recognised courses. We have carefully selected these courses to give you the most out of both your learning and employment journey. \n\n • HTML Essentials (6 weeks)\n, • CSS Essentials (6 weeks)\n\n The training is delivered via multimedia rich video tutorials, presentations and quizzes through a portal that you study online from anywhere you choose. You will also be assigned an expert tutor and a support mentor to help you throughout your training. \n Once the HTML & CSS courses are complete, you will be ready to move forward. \n Step 2 -Online Training (*12 weeks) \n The second step includes a selection of more advanced courses to get you up to speed. \n\n • Learn the Command Line (1.5 weeks)\n, • Learn Git & GitHub (1.5 weeks)\n, • Learn JavaScript (1.5 weeks)\n, • Learn Python 3 (1.5 weeks)\n\n JavaScript forms the foundation of almost everything you see on the Internet, so it will be essential! Python is highly versatile. You can use it for both small and complex tasks, and it is used across many different industries. \n Step 3 - Build a Portfolio Website Project (1 week) \n Additional Courses \n\n • AWS Certified Cloud Practitioner\n, • Microsoft Certified: Azure Administrator Associate\n\n Step 4 - Junior Programmer placement (£25K - £40k) \n We work with you to secure your first role as a Junior Programmer, with a starting salary of anywhere between £25K - £40k. While working as a Junior Programmer, we will release your second batch of training which is specifically designed to qualify you to move into the programming field. \n Programmer Role \n Once you have completed all the mandatory training in step four and have gained two plus years experience in the coding industry, you will be ready to move into higher paying programming roles. Our recruitment support team specialises in the Web and programming space and roles at this level have an average starting salary of £45K. \n We have been helping career changers and new career seekers gain new careers since 2009 and we are a CompTIA Gold Partner, accredited by the BCS (Chartered Institute of IT/ British Computer Society) to ensure we provide the highest levels of training. \n In addition, we are also ELCAS approved to help members of the Armed Forces, Service Leavers and Veterans gain rewarding careers in IT and Cybersecurity. \n Job Guarantee \n Due to the success of this programme and the skills shortage of entry-level coding staff, we can guarantee you will secure a job upon completion of your study programme or we will refund you 100% of your course fees back. This is subject to our terms of learning/ terms of business. \n Passionate about starting a career in coding? Apply now and one of our friendly advisors will be in touch. \n Keywords: Website, Web Developer, Business Development, Website, Web Design, Front End, Back End, Full Stack, Computer Programmer, Computer Systems Engineer, Systems Analyst, Programmer Analyst, Database Administrator, Front-end Developer, Mobile App Developer, Software Developer, Data Scientist, Cloud Engineer.

Are you looking to benefit from a new career in Software Development? \n Skills shortages in the IT sector is driving the need for qualified, entry-level career seekers and career changers. \n We help place graduates from this programme in top UK companies and organisations needing to employ entry-level software development staff that can hit the ground running with up-to-date skills gained from this programme. \n The best part is you will not need any previous experience as fully accredited training, which includes tutor support and mentoring, provides you with the skills, practical knowledge, and qualifications for you to secure a professional job and career in coding. You will also have the reassurance of a job guarantee (£25K-£40K) upon completion. \n Whether you are working full-time, part-time or are unemployed, this package has the flexibility to be completed at a pace that suits you and can be completed in a few weeks or a few months (step 1 to 4 below). Your job and career goals are completed in four simple steps. \n Step 1 -HTML and CSS Online Training (*12 weeks) \n The first step is completing a selection of professional and industry-recognised courses. We have carefully selected these courses to give you the most out of both your learning and employment journey. \n\n • HTML Essentials (6 weeks)\n, • CSS Essentials (6 weeks)\n\n The training is delivered via multimedia rich video tutorials, presentations, and quizzes through a portal that you study online from anywhere you choose. You will also be assigned an expert tutor and a support mentor to help you throughout your training. \n Once the HTML & CSS courses are complete, you will be ready to move forward. \n Step 2 -Online Training (*12 weeks) \n The second step includes a selection of more advanced courses to get you up to speed. \n\n • Learn the Command Line (1.5 weeks)\n, • Learn Git & GitHub (1.5 weeks)\n, • Learn JavaScript (1.5 weeks)\n, • Learn Python 3 (1.5 weeks)\n\n JavaScript forms the foundation of almost everything you see on the Internet, so it will be essential! Python is highly versatile. You can use it for both small and complex tasks, and it is used across many different industries. \n Step 3 - Build a Portfolio Website Project (1 week) \n Additional Courses \n\n • AWS Certified Cloud Practitioner\n, • Microsoft Certified: Azure Administrator Associate\n\n Step 4 -Entry Level Development placement (£25K - £40k) \n We work with you to secure your first role in software development, website administration or programming, with a starting salary of anywhere between £25K - £40k. While working in your first role, we will release your second batch of training which is specifically designed to increase your development knowledge to help you develop your career further to become a software developer. \n We have been helping career changers and new career seekers gain new careers since 2009 and we are a CompTIA Gold Partner, accredited by the BCS (Chartered Institute of IT/ British Computer Society) to ensure we provide the highest levels of training. \n In addition, we are also ELCAS approved to help members of the Armed Forces, Service Leavers and Veterans gain rewarding careers in IT and Cybersecurity. \n Job Guarantee \n Due to the success of this programme and the skills shortage of entry-level development staff, we can guarantee you will secure a job upon completion of your study programme, or we will refund you 100% of your course fees back. This is subject to our terms of learning/ terms of business. \n Enthusiastic about starting a career in coding? Apply now and one of our friendly advisors will be in touch. \n Keywords: Website, Web Developer, Business Development, Website, Web Design, Front End, Back End, Full Stack, Computer Programmer, Computer Systems Engineer, Systems Analyst, Programmer Analyst, Database Administrator, Front-end Developer, Mobile App Developer, Software Developer, Data Scientist, Cloud Engineer.

Field Service Vehicle Engineer - PeterborughDay shifts – Monday to FridayAre you ready to go on the road and take your technical skills to a dedicated network of customer sites?If so, then this could be the role for you?We are looking for a self motivated and independent Vehicle Engineer who can travel to our clients various workshops in a designated area providing:Your day starts when you start your vehicle!Are you ready to go on the road and take your technical skills to a dedicated network of customer sites?If so, then this could be the role for you?In this role, no 2 days will ever be the same and the products that you work on will be diverse. HGV's, Ground Support GSE, RORO (Roll on Roll Off), Fire and rescue, Tractors and Tugs plus other bespoke operating platforms.We are looking for a self motivated and independent HGV Vehicle Engineer who can travel to our clients various workshops in a designated area providing:CalloutsPreventative MaintenanceEmergency BreakdownsPre-arranged servicing at rural sitesMOT PreparationEngine work and diagnostic investigationsCorrection of running defectsChassis and fabrication workHydraulics and pneumaticsImprovement of vehicle standardsElectrical and wiring inspections and correctionsYour industry is moving faster with every day that passes. Electric & Hydrogen Vehicles are now part of the present and you will be trained on the newest products and repair techniques when required.A Class2 Licence would be beneficial.You will need to be a fully qualified Commercial Vehicle Technician or have been accredited via an authorised Apprenticeship.Benefits – you will start with 24 days annual holiday (plus bank holidays) per annum, you will also be enrolled in the pension scheme and qualify for the private healthcare scheme.If this role isn't for you but you are looking for a move, then please get in touch.Kautec Recruitment is a fast growing automotive people business that recruits the right way.HGV, heavy goods vehicle, commercial vehicle, RCV, refuse collection vehicle, tipper, sweeper, gritter, mechanic, vehicle engineer, vehicle technician, fitter, workshop.A problem solver with a can-do mindsetAbiding by health and safety rulesYou will be travelling within an area of North London and EssexWe require an excellent understanding of vehicle technology, and be capable of following the repair process from fault analysis to completionThe personal qualities that my client are looking for are simple, these are the ethos of an exemplary team member that can represent the company in the best way possible;Reliable and punctualEnthusiastic, proactive and an innovative thinkerTPBN1_UKTJ

Field Service Engineer - Compressed Air Systems - UK Wide - Based Commutable To Newark\n \n \n We are recruiting on behalf of our client for a Multi-Skilled Field Service Engineer to support customers across the UK. This is an excellent opportunity for a skilled engineer with a strong electrical and mechanical background looking for a varied field-based role with excellent earning potential and ongoing tra... \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Cyber Security Placement Programme - No Experience Required \n \n Are you looking to kick-start a new career in IT? \n We are recruiting for companies who are looking to employ our Cyber Security Traineeship graduates to keep up with their growth. The best part is you will not need any previous experience as full training will be provided. You will also have the reassurance of a job guarantee (£24K-£45K) upon completion. We are currently placing over 100 of our graduates into new roles each month. \n Whether you are working full time, part time or unemployed, this package has the flexibility to be completed at a pace that suits you. \n \n The traineeship is completed in 4 easy steps. \n Step 1 - Online Training \n The first step is completing a selection of professional, accredited and industry recognised IT Support courses by CompTIA, Microsoft and Cisco. The training is delivered via multimedia rich video tutorials, presentations and quizzes through a portal that you study from home. You will also be assigned an expert tutor to help you throughout your training. \n Step 2 - Practical Training \n You will gain the practical experience by using our cutting edge Livelabs. Gaining hands-on experience is essential in today’s IT industry for both certifications and keeping up to date with new technologies. Theory is often not enough these days, companies require hands on practical experience to make sure you're job ready. \n Step 3 - Official exams \n You will then go on to sit the CompTIA A+ exams to give you the official certifications which will be recognised worldwide. The CompTIA A+ is the most commonly asked for certificate in entry level IT roles. \n Step 4 - IT Technician placement (£24K-£30K) \n You will be placed into your first role as an IT Technician, with a starting salary of anywhere between £24K-£30K. You will need to gain two years experience in this role before you can progress into a cyber security analyst role. While working as an IT Technician, we will release your second batch of training which is specifically designed to qualify you to move into the cyber security field. This will consist of online training, practical training and an official exam. \n Cyber Security Role \n Once you have completed all of the mandatory training in step four and have the required two years experience in the IT industry, you will be ready to move into your Cyber Security Technician role. We have partnered with a number of large IT companies who have a massive shortage of qualified cyber security staff. In this role the average starting salary is £45K. \n At a one off cost of £1499, or 13 interest free monthly instalments of £130, this represents a great opportunity to start a rewarding career in IT and have a real career ladder to start climbing. If you are not offered a role at the end of the training we will refund 100% of your course fees. \n We have a proven track record of placing 1000+ candidates into new roles each year. Check out our website for our latest success stories. \n Read through the information? Passionate about starting a career in IT? Apply now and one of our friendly advisors will be in touch. \n Keywords: \n IT Security, Cyber Security IT Support, IT Technician, Support Engineer, 1st Line Support, and 2nd Line Support, First Line Support, Second Line Support, Trainee, Training Course, Support, It Security, IT Security Technician, Trainee IT Security, Trainee Cyber Security Technician, It Security engineer, IT Security engineer, Trainee IT Security engineer, Trainee Cyber Security engineer \n 'Please note that this is a training course and fees apply’

If you're an experienced Estimator looking for more than another housing or commercial contractor, this could be the change you've been waiting for. Join a Northamptonshire business renowned for delivering exceptional stone, restoration and conservation projects across the UK. \n BASIC SALARY: up to £70,000 per annum \n BENEFITS:· Company Car· 21 Days Annual Leave plus Bank Holidays· Quarterly / Annual Bonus \n LOCATION: Kettering, Northamptonshire \n COMMUTABLE LOCATIONS: Northampton, Wellingborough, Market Harborough, Bedford, Towcester, Rushden, Milton Keynes, Leicester \n JOB DESCRIPTION: Construction Estimator, Project Estimator, Cost Estimator, Bid Writer, Quantity Surveyor - Construction, Housing \n As our Construction Estimator, you will be responsible for interpreting architectural plans and producing accurate, actionable estimates. This is a pivotal role, supporting the company in securing new contracts and ensuring projects are delivered on time and within budget. Working collaboratively with colleagues, surveyors, sub-contractors, project managers, and suppliers, you’ll ensure that commercial objectives align with practical delivery. You will engage with architectural drawings, survey data, contractor input, and project specifications across residential and commercial developments within the construction sector. \n Reporting to the Managing Director, you will be:· Responsible for preparing accurate cost estimates, tenders and budgets for a wide range of projects.· Managing the estimates for projects varying from £100,000 to £1 million plus (average c£250,000)· Required to advise on elements of the design ensuring they are financially viable.· Confident in producing BOM, obtaining quotes and negotiating prices for materials and services. · Visiting prospective and client sites to assess project scope and gather information. \n PERSON SPECIFICATION: Construction Estimator, Project Estimator, Cost Estimator, Bid Writer, Quantity Surveyor - Construction, Housing \n As an experienced Construction Estimator within the building sector, you will be confident in calculating project costs before work begins and in identifying opportunities to secure new business. You will have a strong understanding of construction methods and materials. This varied role requires the skill and drive to support the Managing Director in expanding the company’s portfolio across residential and commercial projects, contributing directly to the growth of the business. \n You will have:· Proven experience as a Construction / Project Estimator or Quantity Surveyor within the construction industry · Relevant Estimator qualifications e.g. Degree or similar in Quantity Surveying or Construction Management· Experience bidding for and submitting tenders to both the private and public sector (£200k -£500k minimum)· Experience in managing projects, working closely with Architects, Project Managers, Surveyors , engineers and clients.· Excellent Microsoft Office skills including Excel \n THE COMPANY: \n We are specialists in delivering outstanding commercial and housing development projects. With over 50 years of steady growth as a family-owned business, we’ve built a reputation for combining craftsmanship, technical knowledge, and professional service across a wide range of sectors. While our roots are in stone masonry, we’ve expanded to support diverse projects that are innovative, tailored, and commercially driven. From specialist heritage work to large-scale commercial developments, our team brings expertise, creativity, and reliability to every project we undertake. \n It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Construction Estimator, Project Estimator, Estimator, Cost Engineer, Quantity Surveyor, Cost Estimator, Tendering Specialist, Proposals Estimator, Contracts Estimator, Construction Planner - Commercial Developments, House Builders, New Housing Developments, Construction, Restoration, Stone Masonry \n INTERESTED? Please click apply. You will receive an acknowledgement of your application. \n Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. \n Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client. \n REF: MH18240, Wallace Hind Selection

Semi-Skilled Maintenance Engineer - Hospital EnvironmentThis is a role for a Semi-Skilled Maintenance Engineer supporting essential building services across a major hospital site. You'll help keep critical systems safe, compliant, and fully operational across electrical, mechanical, and fabric disciplines.About the RoleWe're seeking a committed Semi-Skilled Maintenance Engineer to support the maintenance and safe operation of key building services within a hospital setting. You'll work across electrical, mechanical, fabric, BMS, fire alarms, boilers, pressure systems, water systems, and specialist healthcare infrastructure.This role suits someone who enjoys hands-on technical work, problem-solving, and contributing to a safe environment for patients, staff, and visitors.Key ResponsibilitiesOperational Duties \n\n • Act as an Appointed Person (e.g., Authorised Person, Responsible Person, Competent Person, Lift Release Warden, Fire Warden, Fire Door Inspector).\n, • Carry out complex fault diagnosis and rectification across hospital systems.\n, • Work flexibly across electrical, mechanical, and fabric tasks.\n, • Ensure all work complies with HTMs, statutory regulations, Trust procedures, and contractual requirements.\n, • Support safe planning, execution, and documentation of maintenance activities.\n, • Maintain accurate, high-quality records of completed work.\n, • Liaise with contractors, issue Permits to Work, and ensure documentation accuracy.\n, • Work with statutory inspectors to maintain compliance across all systems.\n\n Electrical BiasFor electrically biased engineers: support LV systems, emergency lighting, and critical electrical plant. Ensure safe isolation, statutory compliance, and provide technical guidance.Mechanical BiasFor mechanically biased engineers: maintain HVAC, pumps, valves, medical gas systems, heating, cooling, and ventilation. Support safe operation and complex fault resolution.Fabric BiasFor fabric-biased engineers: maintain and repair building fabric including doors, windows, fixtures, fittings, fire doors, finishes, and general carpentry tasks.Regardless of bias, you'll work flexibly across all engineering disciplines to support operational needs.Customer & Stakeholder Engagement \n\n • Liaise with hospital departments to provide professional advice and support.\n, • Maintain strong working relationships with Trust staff, contractors, and colleagues.\n, • Communicate clearly with end users to ensure works are understood and safely coordinated.\n, • Treat patient and clinical areas with sensitivity and respect.\n\n People & Teamwork \n\n • Support colleagues and act within your level of competence.\n, • Promote flexibility, cooperation, and skill-sharing.\n, • Take responsibility for personal learning and development.\n, • Uphold equality, diversity, and respectful treatment of all individuals.\n\n Other Responsibilities \n\n • Support operational needs, including additional hours when required.\n, • Maintain confidentiality and comply with GDPR.\n, • Carry out any other duties reasonably requested by management.\n\n Experience & Knowledge \n\n • Experience in electrical, mechanical, or fabric services.\n, • Strong PC skills, including MS Office.\n, • Ability to diagnose faults on complex systems.\n, • Flexibility to work varied hours and across multiple locations.\n\n Qualifications \n\n • Relevant electrical, mechanical, or fabric qualifications (e.g., City & Guilds) are desirable but not essential.\n\n What you need to do nowIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now.If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. \n Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk

Annual salary: up to £39,809.07 \n Gas Engineer \n Location: Peterborough \n Salary: Up to £39,809.07 per annum plus company vehicle and fuel card \n Contract Type: Full time – Permanent, 42.5hrs per week, Monday to Friday \n This role offers excellent earning potential, with out-of-hours call-outs available in the evenings and at weekends, paid at £35 per call-out. \n About the Role: \n We’re looking for a skilled and safety-conscious Gas Engineer to join our team in Peterborough delivering high-quality gas servicing, repairs, and installations across our clients’ housing stock. Your role will be vital in ensuring that all gas appliances and systems are safe, compliant, and fit for continued use. \n You’ll carry out a range of domestic gas works including boiler diagnostics, repairs, servicing, and installations. Accuracy, attention to detail, and a commitment to safety are essential, as your work directly impacts the wellbeing of residents, staff, and the wider public. You’ll be expected to work independently and as part of a team, maintaining high standards of customer service and compliance at all times. \n Key Responsibilities: \n\n • \n Carry out servicing, repairs, and installations of domestic gas appliances including boilers, cookers, and fires \n • \n Diagnose faults and complete remedial works efficiently and safely \n • \n Perform landlord gas safety inspections and issue certificates (CP12s) \n • \n Ensure all work complies with current gas regulations and internal procedures \n • \n Respond to emergency call-outs and urgent repairs when required \n • \n Record all work completed using handheld devices or job management systems \n • \n Liaise with tenants, housing officers, and internal teams to ensure clear communication \n • \n Maintain van stock levels and order materials as needed \n • \n Identify and report any safeguarding concerns or property hazards \n • \n Work collaboratively with other trades to complete multi-skill jobs \n • \n Participate in toolbox talks, training sessions, and safety briefings \n • \n Ensure PPE is worn and health & safety procedures are followed at all times \n • \n Support apprentices or junior engineers when required \n\n Key Criteria \n\n • \n Qualified to City & Guilds or NVQ Level 3 in Gas Installation and Maintenance \n • \n Hold valid ACS certification (e.g. CCN1, CENWAT, CKR1, HTR1) \n • \n Experience in domestic boiler servicing, fault diagnosis, and installation \n • \n Good understanding of electrical safe isolation and basic wiring principles \n • \n Knowledge of current gas safety legislation and compliance standards \n • \n Experience working in social housing or local authority environments (preferred) \n • \n Excellent communication skills with a customer-focused approach \n • \n Ability to work independently and as part of a team \n • \n Comfortable using handheld devices or digital job management systems \n • \n Strong attention to detail and commitment to safe working practices \n • \n Flexible and willing to travel across properties and attend out-of-hours callouts \n • \n Full UK driving licence \n\n Benefits we can offer you: \n\n • \n 25 days annual leave plus bank holidays \n • \n Annual Mears Fun Day - Our annual Fun Day is organised as a massive thank you from the Executive team for all the hard work! \n • \n Volunteering Leave - Mears supports employees to undertake paid volunteering in the community, in support of our social value commitment. \n • \n Staff perks with Mears Rewards - discounts of up to 10% weekly groceries, holidays, eye test vouchers, Share save scheme, plus much more \n • \n Family friendly policies \n • \n Company Vehicle and Fuel Card \n • \n Access to EAP Counselling sessions \n\n All our roles require candidates to have the entitlement to work within the UK, Mears does not currently offer visa sponsorship. \n To drive a Mears vehicle, you must be aged over 21 have held your licence over 3 months and have less than 9 points. \n Candidates should be aware that all our roles are subject to relevant Background, Identity & Security checks before commencement of employment. \n Required Qualifications: CCN1 Core Domestic Gas Safety - Skills Training Agency, CENWAT Central Heating Boilers & Water Heaters - LCL Awards, CKR1 Domestic Cooking Appliances - LCL Awards \n Apply below or to discuss your application further; contact: Francesca Swan () \n If you need any help with your application process, we are here to support you. We will be accessible every step of the way. \n At Mears Group, we are committed to fostering a diverse and inclusive environment where everyone can thrive, we are a Disability Confident employer, valuing individuality and ensuring equal opportunities for all. \n We proudly support the Armed Forces Covenant and are honoured to have achieved the Gold Award in the Defence Employer Recognition Scheme (ERS) to coincide with this, we hold an Endorser Award for the Career Transition Partnership, recognising our commitment to veterans transitioning into civilian careers. \n In our continued effort to promote social mobility, we invite applicants to voluntarily share their background information during the application stages to help us better understand the diverse experiences of our candidates. This is to ensure we are committed to improving social mobility. We use the Social Mobility Index to assess and enhance opportunities for individuals from diverse backgrounds. These questions are optional and will not impact your ability to apply.

Data Engineer \n Peterborough (Hybrid) \n £50,000 - £60,000 Base + Benefits \n We are seeking an experienced Data Engineer with strong Databricks experience to join a growing Data & Analytics team. \n As part of this continued growth, the successful candidate will play a key role in developing and enhancing data solutions, working closely with the Data & Analytics Manager and wider team to support the delivery of data-driven initiatives. \n This is an excellent opportunity for a skilled Data Engineer looking to make an impact within a forward-thinking organisation. \n The Data & Analytics team is in the early stages of implementing Databricks, with the ambition of creating a centralised data platform that will support multiple business applications, including Salesforce, HubSpot, and other key data sources. \n This is a standalone role offering the opportunity for an experienced Data Engineer to take ownership of the Databricks environment, establish best practices, and help shape the future data platform. We are looking for someone who is motivated, proactive, and excited by the opportunity to build something from the ground up. \n Initially, the focus of the role will be centred around data governance, platform setup, and establishing robust standards and processes, with technical support provided by a third-party partner. As the roadmap progresses, the role will move towards designing and developing data pipelines and expanding the Databricks platform. \n Responsibilities: \n\n • Design, build, and maintain scalable, production-ready data pipelines within Databricks.\n, • Develop ingestion, transformation, and optimisation solutions using SQL, Spark, and Python.\n, • Ensure data platforms and datasets are reliable, performant, and ready to support analytics and business intelligence.\n, • Lead hands-on data mapping activities from legacy systems into Databricks, considering downstream analytics requirements including Tableau and future AI-driven use cases such as Mulesoft IDP and Data360/Agentforce.\n, • Support the ingestion, analysis, and integration of data from mergers and acquisitions into the central data platform.\n, • Assess acquired datasets and ensure successful integration into existing data structures.\n, • Establish and maintain testing standards across functional, regression, integration, and user acceptance testing.\n, • Implement data quality frameworks, validation processes, and monitoring within data pipelines.\n, • Support the development and implementation of governance standards defined by the Data & Analytics Manager.\n, • Maintain high-quality documentation and ensure strong data governance practices.\n, • Collaborate with internal teams and external partners, working within an Agile delivery environment using tools such as Jira, Confluence, and Miro.\n\n Requirements: \n\n • Proven commercial experience as a Data Engineer within a modern data platform environment.\n, • Strong hands-on experience with Databricks or similar cloud-based data platforms.\n, • Demonstrable experience designing and building production-grade data pipelines.\n, • Experience working with data migration and mapping from legacy systems.\n, • Strong understanding of data modelling, transformation, and data engineering principles.\n, • Experience supporting analytics and reporting platforms such as Tableau.\n, • Desirable: Experience working with Salesforce Data Cloud (Data 360) or CRM data models.\n, • Desirable: Exposure to AI-ready data platforms, automation, or emerging data use cases.\n, • Desirable: Experience working within a Centre of Excellence or collaborative multi-team environment.\n\n

Building Services Engineer Newark £40,000 - £60,000, depending on experience Job Summary We are looking for a Building Services Engineer to follow the RIBA plan of work and support the design, analysis, and delivery of mechanical, electrical, and public health (MEP) building systems. This is an exciting opportunity for someone who enjoys turning design concepts into practical, sustainable, and compliant engineering solutions, while working closely with colleagues, clients, and project teams throughout the project life cycle. The role offers the chance to contribute to high-quality project delivery through a combination of technical knowledge, digital design skills, and on-site support. Key Responsibilities - Engineering Design: Develop thoughtful, low-carbon mechanical or electrical designs from early concepts through to final construction details, helping bring each project vision to life in a practical and sustainable way. - Modelling & Physics: Prepare accurate engineering calculations, load assessments, and detailed 3D coordination models using Revit (BIM) and AutoCAD, supporting wellinformed design decisions across each project. - Compliance & Safety: Support the delivery of designs that meet relevant Building Regulations, Industry Guidances/Standards, BREEAM requirements, and safety standards under the Building Safety Act, contributing to safe, compliant, and highquality project outcomes. - Project Documentation: Prepare clear and detailed technical specifications, project briefs, material schedules, and performance reports that support clients and project teams throughout delivery. - Collaboration: Work closely with architects, structural engineers, contractors, and wider project teams, building positive working relationships and contributing to joinedup and effective project delivery. - Customer Service: Provide friendly, responsive support to clients throughout the project life cycle, answering technical queries clearly, managing expectations thoughtfully, and building strong working relationships through a high standard of service. - On-Site Inspections: Independently travel to and assist with project site visits, surveys, progress reviews, responses to technical queries, and commissioning support, helping ensure designs are delivered effectively in practice. - Process Compliance: Follow the company's established processes and ways of working, helping to create consistency across the team, support colleagues, and ensure projects are delivered smoothly and to a high standard. - Performance & KPIs: Take ownership of your contribution to the business's three key KPIs, recognising that meeting these measures is an important part of every team member's role. Work consistently to deliver high standards, support team performance, and help the business achieve its wider goals. Skills & Experience Technical Skills - Sector Experience: Ideally 5 years' experience with a minimum of 3 years experience post graduate/qualifaction experience within an MEP design consultancy or dedicated design-and-build contractor environment, with a good understanding of project delivery in practice. - Technical Software: Good working knowledge of industry-standard software, including Autodesk Revit, AutoCAD, and relevant calculation tools such as SAP, iSBEM, IESVE, Hevacomp, Dialux, or Amtech. - Low-Carbon Knowledge: A sound understanding of building physics, passive design principles, heat pump technology, and renewable energy solutions, with an interest in supporting low-carbon project outcomes. Behavioural Competencies - Collaborative Mindset: Works positively across mechanical, electrical, and wider project disciplines, contributing to joined-up thinking and helping the team deliver wellcoordinated building design solutions. - Proactive Problem Solving: Looks ahead to identify potential design clashes, regulatory challenges, or site issues early, and responds with practical, thoughtful solutions that support smooth project delivery. - Client-Centric Communication: Communicates complex technical information in a clear and accessible way, helping clients, architects, and project teams understand engineering decisions with confidence. - Adaptability & Continuous Learning: Shows a positive approach to learning, staying open to new technologies, evolving software platforms, and changes in industry guidance and building regulations. - Accountability & Integrity: Takes responsibility for the quality and accuracy of their work, recognising the importance of safe, compliant, and well-considered engineering decisions. - Commercial Awareness: Understands the commercial context of project delivery, balancing quality, sustainability, and technical ambition with programme, budget, and client expectations. - Feedback & Continuous Improvement: Actively seeks and responds positively to both internal and external feedback, using it to strengthen working relationships, support personal development, and continuously improve the quality of work delivered. Qualifications & Education - Degree: A degree in Building Services Engineering, Mechanical Engineering, Electrical Engineering, or a related built-environment discipline, providing a strong foundation for this role. - Professional Standing: Membership, or a willingness to work towards membership, with a recognised professional institution such as CIBSE, IET, or IMechE. - Chartership Status: An interest in, or progress towards, achieving Chartered Engineer (CEng) or Incorporated Engineer (IEng) status would be welcomed. \n

IT Support Engineer \n Newark \n \n Profectus Recruitment is working with a growing organisation looking to add an IT Support Engineer to its internal IT team. \n \n This is a varied role offering a mix of helpdesk support, infrastructure administration and project work. You'll support users across multiple sites, helping to maintain and improve the systems the business relies on every day. \n \n Key responsibilities: \n • Providing 1st and 2nd line IT support to end users \n • Supporting Microsoft 365, Active Directory and Azure environments \n • Building, deploying and maintaining end-user devices \n • Troubleshooting hardware, software and networking issues \n • Supporting onboarding and offboarding processes \n • Assisting with system upgrades, migrations and IT projects \n • Maintaining documentation and supporting IT best practice \n \n What we're looking for: \n • Previous experience in an IT support role \n • Strong knowledge of Windows, Microsoft 365 and Active Directory \n • Experience with Intune and Azure \n • Good understanding of networking fundamentals \n • Excellent troubleshooting and communication skills \n • Full UK driving licence and access to a vehicle \n \n In return, you'll join a supportive team, gain exposure to a broad technology stack and have opportunities to develop your skills across infrastructure, cloud technologies and IT projects. \n \n Salary: Competitive, depending on experience..... \n

Trainee Junior SOC Analyst – £30,000–£65,000 – Job Programme \n \n Job Guarantee \n Complete the programme and get a job, or get your course fees back. \n This is a self-funded programme that leads to employment, fees apply. \n \n Looking to start a career in Cyber Security? \n We are offering a structured pathway into Cyber Security, designed to help you enter one of the fastest-growing sectors with no prior experience. This opportunity includes training, support, and access to our specialised recruitment support for job roles across the UK. \n \n No prior experience required. \n Train online at your own pace and become job-ready in as little as a few weeks. \n \n Our programme includes: \n • Official CompTIA A+, Network+, and Security+ certifications \n • Hands-on training with real-world cyber security scenarios \n • Live labs and practical cyber security exercises \n • Professional CV and LinkedIn support \n • Interview preparation \n • Dedicated recruitment support until placed \n • Personalised 1-1 tutor support \n \n Flexible, affordable, achievable \n To make things easier, we offer flexible payment options, allowing you to spread the cost of your training over 12 months so you can get qualified without financial pressure. \n \n Salary expectations: \n • Cyber Security Analyst: £35,000 – £55,000 \n • Security Engineer / Ethical Hacker: £40,000 – £65,000 \n • Progression into senior cyber security roles with higher earning potential \n \n We support you into employment \n We focus on outcomes, not just training. ITOL Recruit has over 15 years of experience supporting candidates into roles across cyber security, IT support, and network and security-focused positions. \n From the beginning of your journey to the end, you are supported by qualified tutors, and at the end, our specialised recruitment team helps you secure your first job role. \n \n Apply now to get started

About The RoleRight across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive.Where will you be working?At M Group Highways, were supporting the safe transportation and movement of people across the UK.We dont just build roads and bridges- were building a better future, creating lasting social value that gives back to the communities in which we work.Youll be joining our Peterborough Highways Design team, as the UKs number one highway maintenance contractor, our teams use the latest innovations to create effective solutions. We offer a range of services including planned and reactive maintenance and highway improvement schemes.Want to come and be a part of it?What you'll be doing: Lead the design team in preparing concept designs and feasibility/options reportsUndertake, oversee, review and approve the design and assessment of bridges and related highway structures including drawings and analysis modelsReview and issue technical reports and technical approval documentationWork collaboratively with customers and stakeholders to understand and develop project objectives and engage with the wider project team including ECI with internal construction teams and and/or external contractors.Manage the delivery of the annual design programme and individual scheme programmes to ensure delivery in line with programme and available budgetsProvide technical training, mentoring and line management including professional development for the bridge design team membersSupport the Design manager in resource planning and management and recruitment and retention.Lead implementation of PAS 2080 in design for Carbon Management.What you'll bring: Civil Engineering or related degree to Bachelors or Masters level and Chartered Civil Engineer or Incorporated Civil Engineer working towards Chartership.Demonstrable experience in the practical and pragmatic design of bridges, as well as technical understanding of design and assessment principles and theory, preferably within the Local Authority environment.Proficiency in the use of structural analysis software such as LUSAS, or other analysis software, along with the ability to guide and advise the design team.Extensive knowledge of National Highways standards and other design standards, such as EurocodesThe ability to work effectively as a people manager and lead teams as well as the ability to work and communicate effectively with other design disciplines and with various stakeholders.Whats in it for you?We offer a range of benefits designed to support your life in and out of work, some of which include; Matched or contributory pension schemeOnline GP service, 24 hours a day, 365 days a yearEmployee assistance programmeMy Rewards portal, access to 1000s of retail discountsLife assuranceCycle to work, salary finance and give as you earn schemesEnhanced maternity, paternity leave and adoption leaveReward and recognition schemeIn addition, this role offers: Company car or car allowance and fuel card with a range of EV and hybrid vehicles to choose fromMy Car Choice our salary sacrifice EV/ Hybrid car scheme28 days annual leave plus bank holidaysRecommend a friend get rewarded for introducing people to us!Holiday purchase schemePersonal Accident CoverAbout usWe want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs.Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planetWere open and seek new and better ways of exceeding expectationsWere together and as one team; the whole is greater than the sum of the partsWere ambitious and embrace opportunity, to lead essential infrastructure services for lifeWhether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development.Its an exceptional time to be a part of M Group.Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered.For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding.#MGroupH #LI-HP1 INDREGTPBN1_UKTJ

IT Field Engineer (Entry-Level) – £100–£115 per day \n Full-Time, Part-Time and Contractual Roles Available \n Kickstart Your IT Career with Full Training Provided* \n Are you looking to break into the IT industry but don’t know where to start? We’re recruiting Entry-Level IT Field Engineers to join our team, supporting customers across the UK. No previous IT experience is required as full training can be provided. All you need is enthusiasm, a willingness to learn, and a full UK driving licence. \n About us \n Cerco is an established IT training and recruitment provider based in Crewe, supporting organisations across the UK with skilled, job-ready engineers. With a strong reputation built over many years, we specialise in helping people begin and grow their careers in IT through a combination of practical training, industry insight, and real-world opportunities. \n We partner with a wide range of major UK businesses who depend on us to supply reliable, well-trained engineers for a variety of technical assignments. Our focus is on developing talent from the ground up, ensuring every engineer we place has the confidence, knowledge, and practical ability to succeed in the field. \n Whether candidates join us through the training route or come with existing experience, our aim is to provide consistent, professional support and access to a broad selection of IT engineering opportunities across the UK. \n About You \n We’re looking for individuals who are: \n\n • Passionate about technology with a desire to build a long-term IT career\n, • Comfortable travelling to different customer sites (own vehicle required)\n, • Practical and hands-on. DIY or similar experience is a bonus\n, • Ex-military backgrounds are highly desirable\n\n What You’ll Be Doing \n As an IT Field Engineer, your role will be varied and hands-on, giving you exposure to a wide range of on-site technical tasks. Your responsibilities will include: \n\n • Visiting customer sites to install, repair, or troubleshoot IT hardware and peripherals\n, • Setting up and configuring devices, including desktops, laptops, printers, routers, and other equipment\n, • Replacing and upgrading components such as memory, hard drives, screens, and power supplies\n, • Carrying out routine maintenance and health checks on IT equipment\n, • Following technical guides and documentation to complete tasks accurately\n, • Providing clear updates to the IT Support Desk or relevant Cerco contacts\n, • Keeping customers informed of progress, expected timelines, and issue resolutions\n, • Working independently on site, managing your time and workload effectively\n, • Completing basic reporting or job sheets after each visit\n, • Adhering to field service standards, safety requirements, and professionalism at all times\n, • Upholding Cerco’s reputation on every assignment through reliable, friendly, and quality service\n\n Initial Assessment \n All candidates will be asked to complete an initial online assessment. This is used to understand your current technical skill level before progressing you to the next stage of the recruitment process. \n Training (If required) \n After the initial assessment, some candidates may be offered the option to complete our in-house training course, designed to prepare you for real-world field engineering tasks. The programme covers IT fundamentals and practical skills necessary for on-site hardware support. \n This training is optional and is only recommended for applicants who do not already meet the fundamental technical requirements for the role. \n Please note: the training is delivered in partnership with a third-party provider and fees may apply. This includes a DBS check (currently £62) with total costs not exceeding £95. These fees only apply if you choose to undertake the training. \n \n Role Details \n\n • Job Types: Full-Time, Part-Time\n, • Pay: £100–£115 per day\n, • Work Environment: Field-based (on the road)\n, • Benefits: On-site parking (where available)\n, • Licence Requirement: Full, clean UK driving licence (required)\n, • Enhanced DBS Check (required)\n\n

Graduate Software EngineerYour code could help keep aircraft and the ground safely connected, on systems trusted by customers around the world. Start your career as a Graduate Software Engineer where the software you write genuinely matters.As a Graduate Software Engineer you will join an established business that designs and builds the communications equipment relied on to keep passenger, freight and military aircraft safely connected with the ground, based in Lincolnshire. A growing workload across several high-value contracts, alongside the next generation of designs, means the software team is expanding. You will work under the guidance of senior engineers across the full software lifecycle, from design through to development, test and documentation, learning on real products that go out into the world. The aim is clear. You will grow from contributing under close guidance to becoming a confident, capable engineer trusted to play a real part in future designs.Job Responsibilities\n\n • Writing, developing and debugging software code for company products and their manufacturing test systems, under the guidance of a senior engineer\n, • Contributing to software design that meets defined project requirements\n, • Carrying out unit testing and debugging to confirm code performs as intended\n, • Supporting the test and acceptance team through integration, test and acceptance activities\n, • Developing and executing test plans, then writing up clear test reports\n, • Producing technical documentation that records how the software is built and behaves\n, • Taking part in software code reviews and acting on feedback from the team\n, • Putting forward your own ideas and improvements as your confidence grows\n, • Supporting wider departmental activities alongside senior engineers and the department manager\nSkills and ExperienceTo succeed as a Graduate Software Engineer from day one you will need:\n\n, • A degree, ideally a first or 2:1, in software engineering, computer science or a related technical subject\n, • A genuine interest in software and engineering, shown through coursework, personal projects, internships or placements\n, • Some grounding in a programming language and the basics of writing, testing and debugging code\n, • A willingness to learn on the job under the guidance of experienced senior engineers\n, • An interest in developing knowledge of areas such as DSP, FPGA or embedded systems over time\n, • The ability to work well within a close engineering team and take feedback on board\n, • Eligibility to obtain and maintain Baseline Personnel Security Standard (BPSS) clearance\nPay and BenefitsSalary:\n\n, • Up to £35,000\nWorking Hours:\n\n, • 37.5 hours per week\n, • Flexitime with core hours between 09:30 and 15:00\nBenefits:\n\n, • 25 days annual leave plus bank holidays\n, • Enhanced pension scheme with up to 8% company contribution\n, • Private healthcare\n, • Life assurance\n, • Cycle to work scheme\n, • Subsidised staff canteen\n, • Free on-site parking\n, • Option to buy or sell annual leave\n, • Liberty Days allowing short notice annual leave requests\n, • Long service and retirement awards\n, • Flu vaccinations\n, • Training and continuous professional development opportunities\n, • Employee Assistance Programme and wellbeing support\nReady to apply?Graduate roles that put you onto real, high-value projects this early are rare. From your first weeks you would be writing code that helps keep aircraft and air traffic safely connected, learning from engineers with decades of experience behind them. If you want to begin your career somewhere your work carries genuine purpose and your development is taken seriously, apply today and take your first step as a Graduate Software Engineer.

Have you got thousands of miles under your belt and experience you can bring to a busy transport operation? Would you like to join a transport operation that helps keep one of the UK's largest retail supply chains moving? Are you ready to take the wheel in your next permanent driving role? \n \n Here at GXO Newark, we are looking for HGV Class 1 Drivers to join our dedicated Currys transport team. Every day, you will play a vital role in keeping one of the UK's largest retailers stocked and moving, helping products reach stores and customers nationwide. \n \n You will be working on a full-time, permanent basis, on a ‘5 on 3 off’ pattern, contracted to 48 hours per week. We are currently recruiting for the following start time windows: \n \n\n • 5 on 3 off, with start time windows of 20:00 to 00:00\n, • 5 on 3 off, with start time windows of 00:00 to 04:00\n, • 5 on 3 off, with start time windows of 18:00 to 22:00\n, • 5 on 3 off, with start time windows of 16:00 to 20:00\n\n \n Pay, benefits and more: \n \n\n • Annual salary from £43,357.89\n, • 26 days annual leave (including Bank Holidays)\n, • Company sponsored pension scheme\n, • 24/7 online GP service, life assurance and fully comprehensive employee assistance programme\n, • Access to our MyBenefits platform, offering a variety of high street discounts, a cycle to work scheme, cashback cards, a saving scheme and much more!\n, • Admission to GXO University, our online learning platform enabling you to achieve your career aspirations!\n\n \n What you will do on a typical day: \n \n\n • Take the wheel of single and double deck vehicles, delivering products to retail stores across the UK, helping keep one of the nation's largest electrical retail supply chains moving\n, • Complete 2 to 3 deliveries per shift, transporting a mixture of palletised and free-standing goods while enjoying a varied day on the road\n, • Play a key role in ensuring products arrive safely, unloading goods at each destination with support provided for two-person lifts where required\n, • Represent the company with professionalism and pride, operating vehicles safely, legally and efficiently while maintaining accurate delivery and compliance records\n\n \n What you need to succeed at GXO: \n \n\n • Full UK driving licence with category C+E entitlement\n, • Valid Driver Qualification and Digital Tachograph Cards\n, • No more than 6 current penalty points\n, • No DR, DG, DD, BA, CD, AC, LC or TT99 endorsements\n, • Previous experience driving category C+E vehicles is desirable\n\n \n We engineer faster, smarter, leaner supply chains. \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement

Mechanical Design Engineer - Peterborough - 40/50k \n ALH Recruitment are looking to recruit a Mechanical Design Engineer position with immediate effect for our client who continue to grow and are based in the Peterborough area. \n This is an exciting new role to join the Engineering Design Team as a Design Engineer to support the demands of our clients growing business in liquid and powder process solution equipment. As an engineering solutions supplier to the food, beverage, brewery, bakery, dairy and utility industries throughout the UK, they are providing an opportunity to bring forward your own ideas. \n Reporting to the Processing Engineering Manager, you will work on small to major projects within a team of design engineers responsible for delivering cradle-to-grave design deliverables to the liquid & powder process & food industry in the UK. You will be responsible for ensuring your designs conform to all relevant UK standards and align to the high standards of the department. \n Role - responsibilities: \n\n • Maintain and amend existing designs.\n, • Incorporate the principles of hygienic design within all aspects of your work.\n, • Produce accurate technical drawings and designs for the engineering department, customers, and suppliers.\n, • Produce and manage BOMs, ensuring all changes are recorded.\n, • Perform mechanical design and development using SOLIDWORKS and autoCAD with a "Hands on" approach.\n, • Work within the integrated project team to provide design solutions against requirements, and within budget and timescales.\n, • Carry out site surveys around the UK where relevant.\n, • When and where needed attend customer-facing meetings and manage customer relationships.\n, • Support visits and meetings at UK sites and suppliers when required.\n, • Liaise with the process team to align P&ID’s with 2D and 3D drawings.\n, • Develop and present project design proposals to the sales team and respective client(s).\n, • Develop a good working knowledge of the process industry.\n, • Develop a technical understanding of the relevant standards and regulations which are required to deliver compliant designs.\n\n Undertake specialist training required to efficiently utilise the tools for the role. \n Skills / Experience \n\n • Able to understand and express technical concepts in both written and verbal language.\n, • Excellent communication and organisational skills.\n, • Able to innovate new solutions as well as apply existing solutions to problems.\n, • Understanding of mechanics, such as cantilever loads, point loads, etc.\n, • Awareness of engineering mathematics.\n, • Good CAD proficiency– SOLIDWORKS/autoCAD (Minimum of 3 years)\n, • Relevant industry experience.\n, • Experience of ‘Design for Manufacture’.\n, • Be a creative problem solver with the ability to multitask in a rapidly changing environment.\n, • Have an analytical and logical mindset with a high attention to detail.\n, • Team player.\n\n Awareness of relevant standards and regulations. \n If you feel you have the skills and experience to step into this exciting Design Engineer position, please apply below:

Are you a Rolling Stock Engineer working on HST and locomotives across multiple locations and countries? We are specialists in the procurement, engineering, refurbishment, export and commissioning of locomotives and rolling stock around the world. From our base in the UK, we support railway operators across multiple continents, helping to give locomotives and passenger trains a second life through engineering excellence, innovation and hands-on expertise. BASIC SALARY: Up to £60,000 dependant on experience LOCATION: Dereham, Norfolk COMMUTABLE LOCATIONS: Kettering, Corby, Northampton, Wellingborough, Wisbech, March, Cambridge, Ely, Thetford, Peterborough, Huntingdon, Lowestoft, Ipswich, Bury St Edmunds, Great Yarmouth, Kings Lynn, Newmarket, WHY JOIN US?· Performance-related bonuses · All expenses covered · Flexible employment options (employee or contractor) · Opportunities for project-based assignments · UK and international travel · The chance to work with iconic railway vehicles and support railway operations around the world JOB DESCRIPTION: Rolling Stock Engineer - Trains, Rail Working closely with our Head of Engineering, as a Rolling Stock Engineer you'll play a key role in the inspection, maintenance, repair and preparation of locomotives and rolling stock for both UK and overseas operations. This isn't your typical depot-based engineering role. One week you could be working on our fleet in Norfolk; the next, supporting a client overseas as they introduce newly commissioned rolling stock into service. If you enjoy variety, responsibility and seeing the real-world impact of your work, we'd love to hear from you. KEY RESPONSIBILITIES: Rolling Stock Engineer - Trains, Rail · Inspecting, maintaining and repairing locomotives and rolling stock · Preparing vehicles for export to international customers · Supporting overseas commissioning projects · Working alongside client driver and maintenance teams · Providing technical expertise across a range of rolling stock projects · Assisting with the continued development of ROMIC's engineering capability PERSON SPECIFICATION: Rolling Stock Engineer - Trains, Rail# To be successful in your application, ideally you will have: · Proven experience with Class 43 HST power cars · Strong knowledge of Mk3 coaching stock · A practical, hands-on engineering background · Willingness to travel within the UK and internationally THE COMPANY: We are a family-run railway business with a global reach and a reputation for delivering complex rolling stock projects. We combine commercial expertise with practical railway engineering knowledge, giving our team the opportunity to work on unique projects that few companies can offer. From HST exports and fleet refurbishment programmes to international commissioning and technical support, no two projects are ever quite the same. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client. REF: AM18534, Wallace Hind Selection

\n Job Title: Senior Design Engineer \n 24 Month Contract - Inside IR35 \n Location: Peterborough (Full Time On Site) \n \n This role requires a 5 day in the office model. Ad-hoc flexibility is accommodated aligned with Business needs. \n \n Belcan are currently working with one of the leaders in the Engineering industry to support them in their search for a Senior Design Engineer. The Client is looking to hire across their Industrial Power Systems Division (IPSD) designs, tests and manufactures 0.5 to 18L engines that power over 5000 applications including Marine, Petroleum, Industrial Applications, Electric Generators, and Locomotives. The company strategy includes sustainability as one of four focus areas and IPSD is engaged and actively preparing green energy solutions for the future. \n \n Job Summary \n\n • The client are currently seeking a Design Engineer to join the Component Engineering Base Engine Team as they approach a period of significant investment to bring new products to the market. This role will be focused on design solutions to address challenging requirements, from projects within New Product Introduction.\n, • The successful candidate will serve as an experienced contributor on assignments that are complex in nature, working with individuals and teams across global Manufacturing sites, suppliers and customers.\n\n \n What You Will Do: \n \n As a Design Engineer in the team, you will be expected to have strong relevant design experience, knowledge of IC engines and be able to lead, plan and execute challenging tasks and projects. Tasks will include: \n \n\n • Design and packaging engine components such as major aluminium and cast iron castings, geartrain, valvetrain, drivetrain and in-cylinder components.\n, • Input to system design development for the breather, cooling, FEAD & lubrication system\n, • Working in a multi-disciplined global team to ensure solutions meet customer, durability and functional requirements\n, • Developing strong relationships with suppliers\n, • Planning and managing project and sub-project deliverables, ability to lead\n, • Conducting risk assessment through effective FMEA generation on components and systems to identify and address design risks and determine validation needs.\n, • Maintain communication to peers, team leader and stakeholders with progress against planned activities\n, • Development of drawings to the client's standards and other technical data to support the release of parts for prototype and volume production.\n, • Work with suppliers using APQP methodology and tools\n\n \n What You Have: \n Basic requirements \n\n • Expert level of expertise in complex CAD geometry using CREO10\n, • A sound understanding of the requirements of systems that interact with these components such as Rotating Systems, Valvetrain, Lubrication, Breather and Cooling systems, Bolted joint and sealing experience\n, • Strong understanding of casting and machining processes related to casting of complex cast iron components\n, • Minimum of 6 years design experience in CAD\n, • Strong technical background (HNC or technical degree preferred in mechanical or automotive engineering) though other qualifications or experience are equally valued\n, • Good understanding of Component Manufacturing principles & processes\n, • Good understanding of Manufacturing Assembly principles\n, • Design knowledge of engine & mechanical components and systems\nDesirable requirements\n\n, • Knowledge and usage of Team Centre - or similar data management software\n, • Experience of running and participating in FMEA\n, • Experience in component and engine validation & verification\n, • Experience gained in the off-highway diesel or machine sector\n, • Experience with alternative fuels and spark ignited engines\n, • Familiarity with the APQP methodology\n\n \n \n This vacancy is being advertised by Belcan

Role - Electrical Engineer \n Location - Peterborough, UK \n Contract Type - Permanent \n Working Pattern - Shift-based, site-based role (4 on 4 off) \n Salary - £57,089 (inclusive of shift allowance) Start Date - ASAP \n \n Join a World-Class Manufacturing Team in Peterborough \n \n Are you an experienced Electrical Engineer ready to take on a role where your expertise directly supports high speed manufacturing? \n At Crown, we're not just producing cans-we're creating world-class products with precision, innovation, and pride. With over 130 years of global success, 179 plants across 39 countries, and a reputation for operational excellence, we offer the stability of a global leader combined with the energy of a growing, cutting-edge site. \n Our Peterborough facility is a standout success story, recognised internally as "Overall Best Plant in EMEA" within just three years of opening. We're now looking for an Electrical Engineer, a unique opportunity to play a key role in our growing operation. \n The Opportunity \n In this hands-on technical role, you'll be responsible for maintaining and optimising electrical systems across the plant, ensuring minimal disruption to production and full compliance with safety standards. \n You'll work closely with our team of engineers to resolve and implement innovative solutions that improve efficiency and performance. From fault-finding and repairs to installation and modification of equipment, you'll play a key role in keeping the production line running at peak performance. \n This role also involves analysing line performance, updating PLC software, and supporting continuous improvement initiatives to maximise output and reliability. \n What's on Offer \n \n\n • Salary of £57,089, inclusive of shift allowance\n, • Generous pension scheme, healthcare benefits\n, • Structured shift pattern providing consistency and balance\n, • Opportunity to work with industry-leading, automated manufacturing technology\n\n \n What you'll bring \n You'll be a proactive and technically skilled Electrical Engineer with a strong commitment to safety, quality, and continuous improvement. You'll thrive in a fast-paced manufacturing environment and be confident working both independently and as part of a team. \n A Level 3 Apprenticeship (or equivalent) in Electrical Engineering or Mechatronic Engineering (with an electrical bias) is essential. Experience in high-speed manufacturing environments, along with knowledge of fault-finding techniques and basic programming, and experience with Allen Bradley PLCs will be highly beneficial. \n You'll also bring a "can-do" attitude, strong problem-solving skills, and the ability to support and collaborate with production teams to minimise downtime and improve performance. \n \n Why Crown? \n At Crown Peterborough, we invest in our people because we know they drive our success. In just three years, around 20% of our team has been promoted, and many others have been supported through apprenticeships in areas like Mechatronics, HR, Continuous Improvement, and Leadership. \n You'll be joining a business that genuinely lives its values-where high performance is recognised, development is supported, and teamwork is at the core of everything we do. \n If you're looking for more than just a job-if you want to be part of a team that's setting the standard in manufacturing and building something exceptional-this could be your next move!!! \n Apply today and be part of a team where #ThisTeamCan. \n

Software Test EngineerMake sure complex, mission-critical technology performs exactly as it should, and help the engineers coming up behind you do the same.This is a Software Test Engineer role for an experienced engineer ready to work with real autonomy.As a Software Test Engineer you will play a key part in proving that the products built by an established manufacturer of mission-critical equipment for the aviation and defence sectors perform exactly as they should. Working with a good degree of autonomy, you will support integration and testing, develop and execute test plans and write up detailed results, alongside detailed software design and development for the products and their manufacturing test systems. You will also share your experience, providing informal guidance to junior engineers and bringing new team members up to speed. This is a role for someone who already knows their craft and wants to apply it to genuinely complex, high-stakes technology.Job Responsibilities\n\n • Supporting the Test and Acceptance team with integration and testing of company products\n, • Developing and executing test plans, and producing clear, detailed test reports\n, • Carrying out detailed software design and development for products and their manufacturing test systems\n, • Writing, unit testing and debugging software code\n, • Taking part in software design and code reviews\n, • Producing technical documentation across the full product development lifecycle\n, • Applying your knowledge to project requirements with a moderate level of guidance\n, • Providing informal guidance to junior engineers and training new team members\n, • Anticipating potential problems and planning your work to meet project objectives\n, • Supporting the wider department and its activities\nSkills and ExperienceTo succeed as a Software Test Engineer you will need:\n\n, • Proven experience in a software or test engineering role, ideally including hands-on software design and development\n, • A first or 2:1 degree, or equivalent, in a relevant technical subject\n, • Experience of C, C# or C++ programming and of the full product development lifecycle\n, • Some knowledge of communications systems equipment specification, design or test\n, • Some understanding of communications modulation techniques\n, • Practical experience of some of the following: embedded software, development in Windows or Linux, network technologies, and Python, HTML, JavaScript, ASP.NET, SQL or SNMP\n, • Excellent interpersonal skills, communicating effectively with a range of stakeholders\nPay and BenefitsAs a Software Test Engineer you will receive:\n\n, • A salary of up to £50,000\n, • 37.5-hour working week with flexitime and core hours between 09:30–15:00\n, • 25 days holiday plus bank holidays\n, • Enhanced pension scheme with up to 8% company contribution\n, • Private healthcare\n, • Life assurance\n, • Buy and sell holiday scheme\n, • Liberty Days allowing annual leave requests on the day\n, • Long service and retirement awards\n, • Subsidised staff canteen\n, • Cycle to work scheme\n, • Flu vaccinations\n, • Continuous training and learning opportunities\n, • Employee Assistance Programme and wellbeing support\n, • Free on-site parking\nReady to apply?Roles that combine complex, meaningful engineering with real autonomy do not come along often. This is a chance to apply your experience to technology that has to work every time, and to help shape the engineers coming up behind you. If you are an experienced Software Test Engineer looking for work that genuinely matters, this is one to act on. Apply now.

Junior Account Manager - Water Treatment \n Salary: £35,000 - £40,000 \n Location: Peterborough \n An excellent opportunity has become available for a Junior Account Manager to join a successful and growing water treatment company covering East Anglia, Lincolnshire and Nottinghamshire. This Junior Account Manager role is ideal for someone currently working as a Water Treatment Engineer who is ready to progress into a customer-facing position, or for an existing Junior Account Manager looking for a new challenge. \n As a Junior Account Manager, you will support an established customer base, build strong client relationships and provide technical advice across a range of water treatment systems. Working closely with the Area Manager, you'll help manage day-to-day service requirements while ensuring customers receive a high standard of support. \n Key Duties \n\n • Manage and develop customer accounts across your region.\n, • Carry out site visits and use water treatment test kits.\n, • Provide technical guidance on cooling towers, steam boilers and closed systems.\n, • Produce reports and maintain accurate records using Microsoft Word and Excel.\n, • Work closely with the Area Manager to deliver excellent customer service.\n\n Essential Requirements \n\n • Experience within the water treatment or water hygiene industry.\n, • Hands-on experience using site test kits.\n, • Good understanding of HSG274, BG50 and L8 guidance.\n, • Strong communication and organisational skills.\n, • A proactive, ambitious and team-focused attitude.\n, • Full, clean UK driving licence.\n\n Salary & Benefits \n\n • £35,000 basic salary with OTE of up to £40,000.\n, • Company vehicle (Toyota Corolla Commercial or similar).\n, • Cashback healthcare plan.\n, • Company pension.\n, • Ongoing training and career progression.\n\n This Junior Account Manager opportunity offers genuine career development within a supportive business, making it an excellent next step for an ambitious professional looking to grow their career. \n Apply now or contact Mollie Caswell at Penguin recruitment for more information.

Are you a finance professional looking for your next opportunity in a fast-paced, multi-user logistics environment? Do you enjoy partnering with operational teams, challenging stakeholders, and delivering meaningful financial insight? If so, we may have the perfect role for you. \n \n Here at GXO, we’re looking for an Assistant Finance Manager (FTC) to join our team in Peterborough, supporting a key open-book contract with Mountain Warehouse, alongside and supporting multi-user operations. This role is a 12-month maternity cover with a planned start from 1st Julyoffering great exposure and potential future opportunities within GXO \n \n Reporting to the Finance Manager, you’ll play a key role in delivering accurate financial reporting, supporting operational decision-making, and building strong relationships with both internal teams and customers. \n \n This is a full-time, fixed-term contract, working Monday to Friday9-5 onsite \n \n Pay, benefits and more: \n \n We’re looking to offer a salary of up to £36,000.00 per annum and 25 days annual leave (plus bank holidays). Your benefits package includes flexible dental insurance plans, a company sponsored pension scheme, a 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme. You’ll also have access to our MyBenefits platform offering a variety of high street discounts, a cycle to work scheme, cashback cards, a saving scheme and much more! \n \n What you’ll do on a typical day: \n \n\n • Deliver weekly and monthly financial reporting, including costings, management accounts, and customer reports\n, • Support the month-end process, including journals, accruals, prepayments, and balance sheet reconciliations\n, • Provide variance analysis and insightful commentary to support operational decision-making\n, • Assist with budgets, forecasts, and rolling financial planning\n, • Attend customer meetings and present financial updates, highlighting key cost drivers and risks\n, • Build strong relationships with stakeholders across finance, operations, and external clients\n\n \n What you need to succeed at GXO: \n \n\n • Experience of finance function within a 3PL, logistics, or open-book finance environment\n, • Strong financial reporting and analytical skills, with excellent attention to detail\n, • Confident communicator, able to challenge and influence stakeholders at all levels\n, • Ability to work in a fast-paced environment and meet tight deadlines\n, • Strong Excel and systems knowledge\n\n \n We engineer faster, smarter, leaner supply chains. \n \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Are you confident handling complex ER cases and guiding managers through them? Can you challenge constructively while staying fair, ethical and solution-focused? Do you thrive in a fast-paced environment where no two days are the same? \n \n We are looking for an ER Advisor to join our Currys site in Newark. As an ER Advisor, you’ll play a pivotal role in supporting operational and functional teams with all aspects of employee relations. Working closely with site leadership and the ER Manager, you’ll provide expert, practical advice across a wide range of people matters — from absence and conduct to organisational change — ensuring best practice, compliance, and a positive workplace culture. \n \n This is a full-time, permanent role working Monday to Friday, 09:00 to 17:00. Some flexibility is required as this is logistics after all. \n \n Pay, benefits and more: \n \n We’re looking to offer a salary of up to £37,169.50 per annum and 25 days annual leave (plus bank holidays). Your benefits package includes flexible dental insurance plans, a company sponsored pension scheme, a 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme. You’ll also have access to our MyBenefits platform offering a variety of high street discounts, a cycle to work scheme, cashback cards, a saving scheme and much more! \n \n What you’ll do on a typical day: \n \n\n • Provide expert advice and guidance on absence, conduct, capability, grievance and wider ER matters\n, • Coach and support managers to confidently handle ER cases in a timely, consistent and compliant way\n, • Monitor ER trends, produce insights, and support continuous improvement across the site\n, • Assist in delivering the ER People Plan, including supporting change programmes and development initiatives\n\n \n What you need to succeed at GXO: \n \n\n • CIPD Level 3 or 5 (or working towards) or QBE experience in an HR/ER advisory role\n, • Strong knowledge of employment law and ability to apply policies in a practical, solution-focused way\n, • Excellent communication and influencing skills, with confidence to challenge and build credibility\n, • Highly organised, analytical and able to manage a varied caseload in a fast-paced environment\n\n \n We engineer faster, smarter, leaner supply chains. \n \n #LI-SH1 \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement

Are you passionate about improving processes and driving operational excellence? Do you enjoy identifying opportunities to make businesses run more efficiently and effectively? Can you lead change, engage stakeholders, and deliver measurable improvements that make a real difference? \n \n We are looking for a Continuous Improvement Manager to join our M&S site in Peterborough. You will identify opportunities to enhance operational performance, optimise workflows, and drive sustainable improvements across our growing business. Working across warehousing, logistics, fulfilment, and operational processes, you will lead initiatives that improve productivity, quality, service, and cost efficiency. Through process mapping, operational analysis, capacity planning, and data-driven decision making, you will identify and eliminate waste, improve process flow, and deliver measurable business results. This is a highly visible role, partnering with teams across the organisation to embed a culture of continuous improvement and operational excellence. \n \n This is a full-time, permanent role, working onsite, Monday to Friday, 08:00 to 16:00 or 09:00 to 17:00. We are happy to consider either of these shifts. \n Pay, benefits and more: \n \n We’re looking to offer a salary of up to £52,684.00 per annum and 33 days annual leave (including bank holidays). Your benefits package includes flexible dental insurance plans, a company sponsored pension scheme, a 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme. You’ll also have access to our MyBenefits platform offering a variety of high street discounts, a cycle to work scheme, cashback cards, a saving scheme and much more! \n \n What you’ll do on a typical day: \n \n\n • Lead continuous improvement projects from initiation through to successful implementation, ensuring measurable business benefits are achieved\n, • Analyse and map end-to-end operational processes, identifying inefficiencies, bottlenecks, non-value-added activities, and opportunities for improvement\n, • Develop and implement improvement strategies that enhance productivity, workflow efficiency, quality, service performance, and cost-effectiveness\n, • Use operational data and performance metrics to identify trends, measure success, and present recommendations to key stakeholders\n, • Build strong relationships with internal and external stakeholders to gain buy-in, drive change, and ensure all improvements are safe, compliant, and sustainable\n\n \n What you need to succeed at GXO: \n \n\n • Proven experience in continuous improvement, industrial engineering, operational excellence, or process optimisation within logistics, supply chain, fulfilment, manufacturing, or a similar operational environment\n, • Strong knowledge of Lean methodologies, process mapping, workflow design, value stream mapping, root cause analysis, and waste elimination techniques\n, • Excellent analytical and problem-solving skills, with the ability to assess operational performance and develop practical, data-driven solutions\n, • Strong communication, stakeholder management, and influencing skills, with the ability to engage confidently at all levels of the organisation\n, • Experience improving operational processes, labour utilisation, productivity, capacity, and workflow efficiency within a fast-paced environment; Lean Six Sigma experience would be advantageous\n\n \n We engineer faster, smarter, leaner supply chains. \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement

CAD Technician Based in Eye, SuffolkMonday to Friday - 9.00am till 5.00pmPermanent Salary dependent on experienceRole OverviewWe are seeking a motivated and detail-oriented Design Engineer to join our client’s team in Eye, Suffolk.This is an exciting opportunity to work on customer-focused engineering projects, producing accurate designs, drawings, and Bills of Materials that support efficient manufacturing and project delivery.Working closely with engineering, production, and project teams, you'll play a key role in developing innovative design solutions, enhancing 3D design capabilities, and ensuring products are delivered safely, accurately, and to the highest standards. Ideal for someone with a strong engineering background who enjoys problem-solving, collaboration, and making a real impact.Duties Include\n\n • Produce and review approval, fabrication, and construction drawings, ensuring accuracy and delivery within agreed timescales.\n, • Create and check Bills of Materials (BOMs) and parts lists, ensuring they are accurate, up to date, and released efficiently to production.\n, • Work closely with customers, colleagues, and manufacturing teams to ensure clear communication and the smooth flow of information.\n, • Support the ongoing development and use of Autodesk Inventor 3D and Vault Professional across the Engineering & Design team.\n, • Apply Design for Manufacture principles and value-engineering techniques to deliver practical, cost-effective solutions.\n, • Follow engineering best practice to design out hazards and minimise risk wherever reasonably possible.\n, • Contribute ideas and initiatives that improve processes, efficiency, and overall team performance.\n, • Actively support Continuous Improvement, Lean Manufacturing, and ISO 9001 quality initiatives to enhance business performance.\nSkills and Attributes\n\n, • Proficient in Autodesk Inventor 3D, SolidWorks, or similar 3D CAD software, along with AutoCAD.\n, • Able to work independently, using initiative to deliver high-quality, accurate work within deadlines.\n, • Strong engineering and manufacturing background with sound technical knowledge.\n, • Experience creating and maintaining Bills of Materials (BOMs).\n, • Familiarity with ERP systems would be advantageous.\n, • Degree, HND, or equivalent qualification in Engineering, Manufacturing, or a related discipline, or relevant industry experience.\n, • Knowledge of iLogic, Python, or other automation/programming tools would be beneficial.\nCompany Benefits\n\n, • Enhanced company pension scheme with employer contributions of up to 7% for long-serving employees.\n, • Free onsite parking.\n, • Life assurance cover of 3x annual basic salary.\n, • Employee Benefits Programme offering exclusive discounts on high street brands, holidays, days out, dining, and more.\n, • Access to a range of health and wellbeing support tools.\n, • GP on Demand service, confidential helplines, and one-to-one counselling support.\n, • 23 days annual leave, increasing to 25 days with service, plus bank holidays.\n For more information regarding this role, please submit a CV to or call !

Can you lead a fast-moving operation while keeping safety and service at the heart of everything you do? Do you thrive on delivering results through people, performance, and continuous improvement? \n \n We are looking for an Operations Manager to join our Currys site in Newark. Working with the Senior Operations Manager, you will manage the flow of customer and supplier goods in and out of the warehouse with efficiency and care. Lead a team on shift, driving excellent service, quality standards, and full Health & Safety compliance. Collaborate with senior leadership to hit KPIs/SLAs, promote continuous improvement, and create a great place to work. \n \n This is a full-time permanent role working 4 on 4 off starting at either 06:30 or 07:00 and finishing at 18:30 or 19:00, dependent on start time. \n \n Pay, benefits and more: \n \n We’re looking to offer a salary of up to £50,000.00 per annum and 25 days annual leave (plus bank holidays). Your benefits package includes flexible dental insurance plans, a company sponsored pension scheme, a 24/7 online GP service, life assurance and a fully comprehensive employee assistance programme. You’ll also have access to our MyBenefits platform offering a variety of high street discounts, a cycle to work scheme, cashback cards, a saving scheme and much more! \n \n What you’ll do on a typical day: \n \n\n • Lead and develop a team of up to 4 managers, driving performance across a workforce of up to 150 colleagues through engagement and enablement\n, • Deliver all operational, customer, and people KPIs while exceeding cost and financial targets within a shared budget\n, • Ensure full compliance with Health & Safety standards, managing stock loss and damage within agreed tolerances\n, • Drive continuous improvement initiatives, identifying opportunities that enhance customer experience, engagement, and financial performance\n, • Build a high-performing, inclusive culture by developing talent, strengthening cross-functional relationships, and positioning the business as an employer of choice\n\n \n What you need to succeed at GXO: \n \n\n • Proven experience in a management role, leading large teams within a logistics or warehouse environment\n, • Strong leadership, organisational and communication skills, with a track record of delivering KPIs and SLAs\n, • Good analytical and decision-making ability, with customer focus and financial acumen (budgets, P&L)\n, • Proficient in Warehouse Management Systems and Microsoft Office, able to work under pressure in a fast-paced environment\n\n \n We engineer faster, smarter, leaner supply chains. \n #LI-SH1 \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. GXO is an equal opportunity employer. We celebrate, support and thrive on diversity and are committed to creating an inclusive environment for all employees. We believe that diversity and inclusion in our business is critical to our success as a global company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. We are an Armed Forces friendly organisation and Disability Confident Leader as part of the Disability Confident Scheme (GIS) and actively welcome applications from people with disabilities. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement

Are you an operations professional who thrives on driving change and delivering successful business improvements? Do you enjoy bridging the gap between projects and operational delivery to ensure long-term success?Are you confident leading implementation activity, engaging stakeholders and embedding change across a fast-paced logistics operation? \n \n Here at GXO, we're recruiting for an Operations Implementation Manager to join our Mountain Warehouse operation in Peterborough. This is a full-time, permanent role, working any 5 from 7, where you'll play a critical role in ensuring operational projects, process improvements and system implementations are successfully transitioned into day-to-day operations. \n \n Working closely with project teams, operational leaders and key stakeholders, you'll be responsible for driving change adoption, ensuring operational readiness and delivering sustainable improvements across the site. \n \n Pay, benefits and more: \n \n We’re offering a salary of £39,140, along with 33 days annual leave inclusive of bank holidays, a company-sponsored pension scheme, life assurance, 24/7 access to an online GP service and a comprehensive employee assistance programme. You’ll also have access to our MyBenefits platform, offering high-street discounts, cashback cards, cycle-to-work schemes and more, alongside opportunities to develop your career within GXO. \n \n \n What you’ll do on a typical day: \n \n\n • Act as the key link between project and operational teams, ensuring new processes, systems and initiatives are effectively transitioned into business-as-usual operations\n, • Lead implementation and change management activities across the operation, ensuring colleagues are engaged, informed and supported throughout the delivery process\n, • Develop and execute communication and rollout plans, ensuring all stakeholders understand upcoming changes, business impacts and operational requirements\n, • Drive operational readiness by coordinating training activities, supporting knowledge transfer and ensuring teams are fully equipped to adopt new ways of working\n, • Monitor post-implementation performance, analysing operational outputs and identifying opportunities to optimise processes, improve service delivery and maximise project benefits\n\n \n What you need to succeed at GXO: \n \n\n • Previous experience in operations management, implementation, continuous improvement or project-led operational support within a logistics, distribution or eCommerce environment\n, • Strong change management and stakeholder engagement skills, with the ability to influence and communicate effectively at all levels of the business\n, • Proven experience delivering operational projects and embedding sustainable improvements within fast-paced environments\n, • Advanced analytical and problem-solving skills, including experience interpreting operational data and producing performance reporting\n, • Strong organisational skills, with the ability to manage multiple priorities, coordinate cross-functional activity and deliver results against tight deadlines\n\n \n We engineer faster, smarter, leaner supply chains \n \n \n \n \n GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. \n \n The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Junior Software Test EngineerStart your engineering career making sure mission-critical technology works exactly as it should, before it ever reaches the field.This is a Junior Software Test Engineer role for a strong graduate ready to learn from experienced engineers.As a Junior Software Test Engineer you will help prove that the products built by an established manufacturer of mission-critical equipment for the aviation and defence sectors perform exactly as they should. Working under the guidance of experienced engineers, you will support integration and testing, help develop and run test plans, and write up the results, while also getting hands-on with the software design and development behind the products and their manufacturing test systems. Full guidance and support come as standard, so you do not need years of experience, just a strong technical foundation and the drive to learn. This is a genuine chance to build your career in a business where the quality of your work really matters.Job Responsibilities\n\n • Supporting the Test and Acceptance team with integration and testing of company products\n, • Helping to develop and execute test plans, and writing up clear test reports\n, • Carrying out software design and development, with guidance, for products and their manufacturing test systems\n, • Writing, unit testing and debugging software code\n, • Taking part in software code reviews and acting on feedback\n, • Producing technical documentation to record how products are built and tested\n, • Applying your knowledge to project requirements with regular guidance from senior engineers\n, • Putting forward your own ideas as your experience grows\n, • Supporting the wider department and its day-to-day activities\nSkills and ExperienceTo succeed as a Junior Software Test Engineer you will need:\n\n, • A first or 2:1 degree, or equivalent, in a relevant technical subject\n, • Good A Level results in science subjects, with proven competence in maths\n, • Some experience of C, C# or C++ programming\n, • An appreciation of some of the following: embedded software, development in Windows or Linux, basic network technologies, and Python, HTML, JavaScript, ASP.NET, SQL or SNMP\n, • A logical approach to problem solving, weighing up the merits of different solutions\n, • Good interpersonal skills and the ability to communicate clearly with the team\n, • A self-motivated, hands-on and customer-focused attitude\n, • The ability to obtain and maintain UK Government security clearance\n, • No prior work experience is needed, as full guidance and training are provided\nPay and Benefits\n\n, • A salary of up to £30,000\n, • 37.5-hour working week with flexitime and core hours between 09:30–15:00\n, • 25 days holiday plus bank holidays\n, • Enhanced pension scheme with up to 8% company contribution\n, • Private healthcare\n, • Life assurance\n, • Buy and sell holiday scheme\n, • Liberty Days allowing annual leave requests on the day\n, • Long service and retirement awards\n, • Subsidised staff canteen\n, • Cycle to work scheme\n, • Flu vaccinations\n, • Continuous training and learning opportunities\n, • Employee Assistance Programme and wellbeing support\n, • Free on-site parking\nReady to apply?This is the kind of role that sets a career up properly, real engineering, real responsibility, and experienced people around you to learn from. If you are a strong technical graduate ready to start out as a Junior Software Test Engineer in a business where quality genuinely matters, this is one to act on. Apply now.

Planning Engineers (All Levels) \n Major Defence Programme \n Derby | Hybrid Working \n £40,000 – £90,000 + Car Allowance + Travel Expenses \n \n A leading consultancy delivering planning and project controls expertise across critical UK infrastructure programmes is looking to recruit Planning Engineers at all levels to support the delivery of a major long-term programme. \n \n This is an opportunity to work within a highly collaborative environment on complex projects where effective planning is central to successful programme delivery. Whether you're an experienced planner or looking to take the next step in your career, you'll be joining a team that plays a key role in supporting nationally significant projects. \n \n The Role \n As a Planning Engineer, you will be responsible for developing, maintaining, and analysing project schedules that support programme delivery from inception through to completion. \n Working closely with project managers, engineers, commercial teams, and client stakeholders, you will provide planning expertise, programme insight, and performance analysis to ensure projects remain aligned with key milestones, objectives, and delivery strategies. \n This role offers exposure to large-scale defence programmes and provides an excellent platform for professional growth within a specialist planning and project controls environment. \n \n Key Responsibilities \n\n • Develop and maintain detailed project schedules using industry-standard planning tools\n, • Support programme delivery teams with planning, forecasting, and schedule management activities\n, • Undertake critical path analysis and identify programme risks, constraints, and opportunities\n, • Produce programme reporting and planning outputs for internal and client stakeholders\n, • Monitor project progress and assess schedule performance against key milestones\n, • Support risk workshops, change management processes, and project controls activities\n, • Ensure programme schedules comply with contractual and governance requirements, including NEC frameworks\n, • Work collaboratively with multidisciplinary project teams to drive successful programme outcomes\n\n \n About You \n We are interested in speaking with planners from intermediate through to senior level who have experience working within complex project environments. \n You may have: \n\n • Experience as a Planning Engineer, Project Planner, or Project Controls Planner\n, • Exposure to defence, engineering, construction, manufacturing, aerospace, or major project environments\n, • Strong understanding of planning principles and programme management methodologies\n, • Experience working with Primavera P6, Microsoft Project, or equivalent planning software\n, • Knowledge of NEC contracts and programme delivery frameworks\n, • Strong communication and stakeholder engagement skills\n, • The ability to analyse programme data and provide meaningful planning insight\n\n \n What's on Offer \n\n • £40,000 – £90,000 salary depending on experience and level\n, • Car allowance and travel expenses\n, • Hybrid working arrangement based around Derby\n, • Opportunity to support major UK defence programmes\n, • Structured career progression and long-term project exposure\n, • Ongoing professional development and training support\n, • Collaborative consultancy culture with a strong pipeline of secured work\n\n \n Apply \n If you're looking to build your career within planning and want to work on complex, high-profile defence programmes, we'd be pleased to hear from you. \n Apply now or contact us for a confidential discussion. \n \n Data Protection Notice \n By submitting your application or CV, you consent to your personal data being processed in accordance with GDPR for recruitment purposes.

Lead Process Engineer \n \n Location: East of England / hybrid working \n Sector: Water, Clean Water, Utilities, Infrastructure \n Discipline: Process Engineering- Clean water \n \n We are working with our Client, a leading Contractor to help secure a Lead Process Engineer to support clean water projects on a long-term water sector framework in the East of England. \n \n This role would suit an experienced Process Engineer, Senior Process Engineer or Lead Process Engineer with a strong background in clean water, water treatment, pumping stations, dosing packages, hydraulics and control systems. \n \n You will work closely with the project design team to develop efficient, safe and technically robust process engineering solutions in line with client and framework standards. \n \n Key Responsibilities: \n\n • Lead process design for clean water schemes including pumping stations, dosing packages and control systems.\n, • Produce process calculations, hydraulic assessments, pump calculations, capacity calculations and water quality assessments.\n, • Prepare datasheets, control philosophies and process engineering technical documentation.\n, • Support control valve sizing and selection, SCADA integration and commissioning requirements\n, • Contribute to HAZOP, LOPA, DSEAR and process safety reviews\n, • Work with multidisciplinary design teams, design leads, modelling teams, control strategy teams, commissioning teams and equipment suppliers.\n, • Review technical information and support bid analysis for third-party process equipment\n, • Ensure designs are delivered in line with CDM Regulations, health and safety requirements, technical standards and project specifications.\n\n \n Ideally, we are looking for degree qualified candidates from water, wastewater, process science, process engineering backgrounds: \n \n\n • Experience in process engineering within the water sector\n, • Strong clean water experience, ideally including pumping stations, dosing systems, hydraulics and system control\n, • Good understanding of process safety, CDM, HAZOP, LOPA and DSEAR\n, • Ability to work collaboratively\n, • Strong communication, stakeholder management and problem-solving skills\n, • CIWEM membership, professional body membership or MSc in Process Engineering would be highly advantageous but is not essential.\n, • Direct experience delivering to AMP cycles with water frameworks, joint venture contracts or clean water infrastructure projects would be ideal.\n, • Experience working in a design and build or multidisciplinary infrastructure delivery environment.\n\n \n A great opportunity to take a lead role on clean water infrastructure projects across the East of England, working as part of a collaborative design and delivery team on long-term projects/ work. \n \n Apply now or contact Full Circle Technical for a confidential chat. \n \n Full Circle Technical is acting as an employment agency and employment business. Applicants must have the right to work in the UK to be considered for this position.

Share your aviation engineering expertise and help develop the next generation of aircraft maintenance professionals. Join a respected EASA Part-147 approved training organisation delivering specialist aircraft type training across a diverse range of regional and business aircraft. \n \n CAA/EASA Approved Instructor \n Peterborough UK (or Home Based) with travel as required \n\n • Full Time or Part Time, Permanent or Contract\n, • Competitive salary dependent on experience\n\n \n Please note: you must be authorised to work in the UK \n Our client is an established EASA Part-147 Maintenance Training Organisation specialising in aircraft maintenance training, consultancy and type training services for the aviation industry. They deliver approved aircraft type training programmes and are seeking experienced aviation professionals to join their instructional team. \n This is an excellent opportunity for a qualified Aircraft Maintenance Engineer with instructional experience, or a desire to move into training and instructing, to contribute to the development of aviation professionals while working with a respected training organisation. \n \n Key Responsibilities \n\n • Deliver approved aircraft type training courses in accordance with EASA Part-147 requirements\n, • Prepare and deliver theoretical and practical training sessions\n, • Assess student competence and practical performance where authorised\n, • Maintain high standards of instructional delivery and student engagement\n, • Ensure compliance with regulatory requirements, approved training materials and organisational procedures\n, • Deliver training through classroom and virtual learning environments where appropriately approved\n, • Maintain accurate training records and associated documentation\n, • Participate in ongoing professional development and technical updating activities\n, • Travel to customer and training locations as required\n, • Support the continuous improvement of training programmes, course content and instructional standards\n\n \n Key Skills and Qualifications \n\n • Qualified Licensed Aircraft Maintenance Engineer\n, • Previous experience within an EASA Part-147 Maintenance Training Organisation is highly desirable\n, • Instructional Techniques Training certificate or recognised Train the Trainer qualification\n, • Strong understanding of EASA Part-147, Part-145 and Part-66 requirements\n, • Experience delivering technical training or a desire to move into an instructional role\n, • Excellent communication and presentation skills\n, • Good spoken and written English\n, • Computer literate with experience using digital training platforms\n, • Experience working on relevant aircraft types\n, • Current or recent aircraft maintenance experience on applicable aircraft types\n, • Ability to demonstrate aircraft type recency\n, • Willingness to travel within the UK and internationally when required\n, • Professional, organised and self-motivated approach\n\n \n Experience delivering or holding type approvals on one or more of the following aircraft would be essential: \n\n • Bombardier CRJ100/200\n, • Bombardier CRJ700/900/1000\n, • ATR 42 and ATR 72 Series\n, • De Havilland DHC-6\n, • Bombardier DHC-8-100/200/300\n, • Bombardier DHC-8-400\n, • Embraer EMB-135/145\n, • Embraer ERJ-170 Series\n, • Embraer ERJ-190 Series\n, • Embraer Phenom 100\n, • Embraer Phenom 300\n, • Embraer EMB-545/550\n\n \n If you are a qualified Aircraft Maintenance Engineer with a passion for sharing your knowledge and developing the next generation of aviation professionals, we would like to hear from you. Whether you are an experienced Part-147 Instructor or an engineer looking to move into a training role, this is an excellent opportunity to join a respected organisation operating within the aviation training sector. \n \n Our client welcomes applications from motivated professionals who can demonstrate the technical expertise, communication skills and commitment required to deliver high-quality aircraft maintenance training. \n \n How to apply: \n If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. \n \n You must be authorised to work in the UK. No agencies, please. \n Other suitable skills and experience includes Aircraft Maintenance Instructor, Aircraft Technical Trainer, Part-147 Instructor, Aviation Technical Instructor, Aircraft Maintenance Training Instructor, Licensed Aircraft Engineer, B1 Licensed Engineer, B2 Licensed Engineer, Aviation Training Specialist, Type Training Instructor, Technical Training Consultant, Aircraft Systems Instructor, Maintenance Training Assessor, Practical Assessor, Engineering Trainer, Aviation Engineering Instructor and Aircraft Maintenance Training Consultant.

Position \n Product Development Manager \n Location \n Peterborough City Centre \n Salary \n £50,000 - £60,000 DOE \n Reporting to \n Chief Product Officer \n Contract \n 5 days per week, Full-time \n Hours \n 37.5 hrs 9:00am – 5:30pm \n Holidays \n 25 Days per annum \n Other Benefits \n\n • Discretionary annual bonus\n, • Contribution to gym membership\n, • Salary exchange pension\n, • Discount on the purchase of Company products\n\n \n The Company \n Buster + Punch is a London-born interior fashion design label working with rare, solid materials to make extraordinary items for everyday use. From lighting and hardware to custom motorcycles and whisky bars, the brand now makes unexpected and elegant interior products. \n Its work is inspired by London’s fashion, music and sub-culture where it collaborates with street artists, bike builders, musicians and fashion designers to inject attitude into their crafted products. \n Buster + Punch is passionate about their people and pride themselves on having built a dedicated and talented team across their business. \n \n The Role \n This is a cornerstone role for product development at B+P. You are an engineer, obsessed with detail. Lateral thinking is second nature, where challenges are solved with efficiency and logic. You can make the ‘big’ decisions and engage accordingly. You know how to ‘do the doing’ and have extensive experience in successful delivery with a consumer brand. You have expertise in at least one of our Hardware, Electricity or Lighting categories and extensive exposure to, ideally leadership of, product development for global markets. You can lead people with a team of varied experience, skill and seniority. You coach and empower and have a real passion for what you do. Above all, you’ve got a can-do attitude and make the B+P vision a reality, fostering strong relationships based on successful delivery along the way. \n There’s growth within the role for both you and the team reporting to you, with the opportunity to join B+P at a particularly exciting time. International travel will be required. \n \n Responsibilities \n\n • Lead the Product Development team at B+P, building structure and scale to a high performing function of the business.\n, • Actively define and contribute to product development, and wider product team strategy.\n, • Deliver extraordinary product from concept to manufacture, to B+P quality and performance standards.\n, • Optimize cost through design for manufacture, production and range optimization.\n, • Own end to end development pathway to pre-defined milestones, governing schedule adherence across the team.\n, • Unblock development challenges with logic and autonomy.\n, • Produce 3D CAD models, and 2D drawing packs using SolidWorks.\n, • Drive consistency in process and documentation.\n, • Facilitate product compliance readiness, working closely with Compliance and Quality.\n, • Encourage continuous improvement; templates, process and product for all New Product launches.\n, • Ensure clear stage gates, deliverables and governance across all projects.\n, • Define and validate Product Specification documents.\n, • Own resolution of critical product development challenges.\n, • Compile the relevant aspects of Product Technical File, with meticulous and repeatable precision.\n, • Partner with Product Management on requirements; own the execution.\n, • Seamless communication with Product team, specifically Product Management, Compliance, Quality, Supply Chain, Production.\n, • Support supplier selection, onboarding, and ongoing performance optimization.\n, • Facilitate engineering engagement with manufacturing partners.\n, • Balance design intent, cost and margin to support commercial product success.\n, • Contribute to range architecture and SKU efficiency.\n, • Clean and structured communication with cross functional teams.\n, • Identify and mitigate technical, supplier and delivery risks proactively.\n, • Promote good working relationships with manufacturing partner.\n, • Set clear objectives, performance standards and development plans.\n, • Report and maintain KPI performance dashboards to include project status, risks and milestones.\n, • International travel will be required; 2-6 times per year.\n\n \n Education and Qualifications \n Degree preferred but not essential. GCSE Maths and English required. \n \n References \n The successful applicant will be asked to supply 2 references to support their application

Design Engineer (Motorsport)£50,000 - £58,000 + Career Development + 25 days Holiday + Training + Pension SchemePeterboroughAre you a Design Engineer from a motorsport background who is looking for an exciting opportunity to join a growing motorsport group that will actively support your work life balance whilst providing exceptional career development?The company are a specialist motorsport company with an excellent reputation across the high-performance vehicle market. They not only design motorsport vehicles but also have racing teams where they regularly compete.Since launching almost 3 decades ago they have built a strong client base through its collaborative approach, technical expertise and high-quality project delivery.The suitable candidate will be working across all aspects of vehicle design, where you will be completing the technical drawings for the racing vehicles. This role will be office based.This role would suit a design engineer from a motorsport background that is looking for an opportunity that can provide exclusive career development and provide the platform for your skills to excel.The Role:Working on all aspects of vehicle designCompleting technical drawing to match specificationsListing to customer feedback and always improving parts performanceThe Person:Experience within the motorsport industryAutoCAD, SolidWorks ExperienceIf you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.Keywords: Mechanical, Design, Motorsport, High performance vehicle, AutoCAD, SolidWorks, PeterboroughJob Reference: BBBH25997We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skillset.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found on our website.TPBN1_UKTJ

SureserveSureserve mission is to be the trusted partner of choice to the social housing and related public sector in delivering essential and affordable heating, energy savings, and compliance solutions.We are playing a key and progressive role in decarbonisation, always delivering for customers, employees, residents and the environment with safety, integrity and respect at the forefront of everything we do.We provide trusted high-quality solutions that focus on energy efficiency, warm, safe, and compliant homes, and an improved quality of life for residents.With a Nationwide reach, regional and local relationships and expertise, and commitment to excellent client service we are set up to be a trusted partner for now and the future.Sureserve Compliance CentralWe are a national company offering market leading heating & hot water solutions from a network of regional offices across the East of England and the Midlands, strategically positioned to ensure comprehensive coverage and uncompromised access to our clientsWe are seeking an experienced gas & oil engineer to join our busy team to carry out service, and repairs on domestic heating and hot water systems for our customers.Overview of Role:The primary responsibility of the Heating Engineer will be to maintain and repair heating systems in our clients' properties. They will ensure that the heating & hot water systems are operating efficiently and safely, and that any repairs are completed in a timely manner ensuring customer satisfaction.Key Responsibilities: Carry out service and maintenance works on a variety of domestic properties across the region.Ensuring high levels of customer care in dealing with clients and tenants to meet the required quality standards.Communicate updates and progress of work, completing the required paperwork electronically and manually.Ensure all Health and Safety requirements and legislation, including Risk Assessments, Safe Systems of Work and COSHH Records, are adhered to during your daily work.To comply with stock ordering and auditing procedures so relevant parts are available to fulfil job requirements.Key Attributes & Requirements: Gas qualifications are essential for this role including as a minimum CCN1, CENWAT, HTR1, CKR1.OFTEC certification ( OFT10-101, OFT10-105E, OFT10-600a)Out of Hours evening and weekend cover on a rota basis is required as part of this roleA friendly and professional attitude to build strong relationships with clients & tenantsIt is important that we complete all the appropriate criminal and reference checks before you start working with us.What We Offer: Company vehicle and fuel cardUniform & mobile deviceSupport provided for professional qualificationsEmployee wellbeing programme, occupational health support, telephone support- counselling for staffService level awarded annual leaveEnhanced maternity & paternity packagesDental/Healthcare cash planCycle to Work SchemeElectric Vehicle Leasing SchemeGender & Equality Working GroupSureserve Academy- a platform for development, career progressionEmployee Voice programmeSocial activities for all of our TeamsSureserve Legends- celebrating the fantastic ways in which our employees live our values.Sureserve is committed to creating a diverse and inclusive workplace. We celebrate individual differences and believe that they contribute to our collective success. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.As part of our commitment to Inclusivity, we offer reasonable adjustments throughout the recruitment process for individuals who may require them. If you feel you need any adjustments, please contactSuccessful applicants will be subject to eligibility checks including the right to work in the UK and DBS checks.Join us in our mission to deliver excellence across the UK.TPBN1_UKTJ

Job Title: Senior Electrical Maintenance Engineer (PLC Fault Finding) Senior Electrical Maintenance Engineer (PLC Fault Finding)Term: Permanent, Full-Time----------------------------------------Working Hours MondayThursday: 08:0016:00 (flexible start available)Friday: Early finish (1pm)Total: 37.5 hours per weekLocation: Diss, IP21Salary: Up to £50,000We are delighted to be working with a well-established manufacturing business to recruit a Senior Electrical Maintenance Engineer (PLC Fault Finding) for their day-shift engineering team.This Senior Electrical Maintenance Engineer (PLC Fault Finding) position offers a hands-on environment, strong work-life balance, and the opportunity to play a key role within a stable, supportive engineering function.----------------------------------------Senior Electrical Maintenance Engineer (PLC Fault Finding) Role Overview This role will suit an experienced Senior Electrical Maintenance Engineer (PLC Fault Finding) who is confident working on manufacturing machinery and comfortable fault-finding across PLC-controlled systems.As a Senior Electrical Maintenance Engineer (PLC Fault Finding) , you will act as a key escalation point on site, supporting more complex faults and helping drive reliability improvements across production equipment.While this is not a programming role, the successful Senior Electrical Maintenance Engineer (PLC Fault Finding) will be expected to confidently use PLCs and HMIs to diagnose faults and support troubleshooting independently.----------------------------------------Key Responsibilities Act as an escalation point for complex electrical faultsCarry out hands-on electrical fault-finding on manufacturing machineryUse PLCs and HMIs to diagnose issues (inputs/outputs, sensors, logic)Support planned and reactive maintenance activitiesWork on motors, drives, control panels, and automated equipmentSupport continuous improvement and reliability initiativesProvide technical support to other engineers on site----------------------------------------Qualifications & Experience Proven experience as an Electrical Maintenance Engineer in a manufacturing environmentStrong background working on production machinery and automated systemsConfident fault-finding electrical issues in live environmentsComfortable using PLCs and HMIs for fault diagnosis and troubleshootingExperience with drives, motors, sensors, and control panelsAbility to work independently and take ownership of problemsQualifications beneficial but hands-on experience is prioritised----------------------------------------Personal Attributes Hands-on and practical approachLogical and structured fault-finding mindsetCalm under pressure in a production environmentTeam-focused and supportiveKeen to learn and develop technically----------------------------------------Salary & Benefits Salary up to £50,000Early finish every FridayDay-based role no on-callFlexible working hoursPrivate healthcareOngoing training and developmentStable and supportive engineering team----------------------------------------Interview Process One-stage, face-to-face interviewSite tour includedFocus on practical fault-finding approachInitial technical discussion including PLC troubleshooting----------------------------------------If youre an experienced Senior Electrical Maintenance Engineer (PLC Fault Finding) looking for a role where you can stay hands-on, solve problems, and be a key technical support on site, wed love to hear from you.----------------------------------------INDMANDue to volume of applications, if you do not hear back within 5 working days, please assume your application has been unsuccessful.TPBN1_UKTJ

Fuel your future with AO – and unlock serious earning potential.We're all about making work, work for you. With a shift pattern designed for real life, you'll have the flexibility you need to keep everything in balance.As one of our Gas Engineers, you'll stay in control of your own Gas Safe card while enjoying a reliable, steady income you can depend on.And the best bit? The rewards. You can earn:- Up to £2,000 in performance bonuses.- Plus, the chance to boost your earnings with overtime averaging up to £3,000 a yearIt's everything you need to power your career forward, with a team that's got your back every step of the way.Here's what you can expect to be doing as a Gas Installations Engineer:As an AO Gas Engineer, you'll head out on the road with one of our drivers, visiting customers in their homes and bringing their appliances to life. You'll be installing gas and electrical products safely and efficiently — no repairs, no guesswork. Just high-quality installs and top-notch customer service, every single time.A Few Things About You:You'll need to have:- A full UK driving licence with no more than 6 points- CCN1 & CKR1 qualifications- To be over 21 for insurance purposes- At least 1 years' experience in gas installationsIt'd be great if you also have:- Some experience installing electrical appliances (but don't worry — we'll give you all the training you need to get up to speed)Our Benefits:What's in it for you:At AO, we've designed our benefits to make life easier, inside and outside of work:- A 4 on, 4 off shift pattern with 24 days holiday — you'll work less than half the year.- A company van with fuel paid for, so you're ready to go from day one.- On-call support from our expert technical team whenever you need it.- Access to fantastic training facilities with ongoing development opportunities.- A competitive pension scheme.Plus, a great range of everyday perks:- Simply Health cash plan to help cover healthcare costs- Help at Hand — access to a 24/7 GP and wellbeing support- The option to buy extra holidays for even more flexibility- A cycle to work scheme to support a healthier commute- Wage stream access, putting you in control of your money every step of the way — access your earnings when you need them, not just on payday- Exclusive ticket access to AO Arena, Sale Sharks and Manchester ThunderAnd that's not all — there's plenty more to discover when you join the team.Location: Broadway Business Park, Yaxley, PE7 3ENClick 'Apply' now to join our family and find out more about the Gas Installations Engineer role.TPBN1_UKTJ

Position: Principal Process Engineer - WaterLocation: PeterboroughSalary Guide: £70,000 - £80,000 Plus Bonus, Car/Allowance & Excellent PackageOur client is a Tier 1 D&B Contractor operating predominantly in the water industry who have been awarded a programme of work to deliver non-infrastructure water and wastewater projects for Anglian Water and they are recruiting for a Principal Process Engineer to help deliver these projects.Reporting to the Head of Engineering, you will provide engineering technical direction to the process discipline engineers in either water or water recycling non-infrastructure projects. You will provide design support for numerous non-infrastructure schemes and ensure all designs are fit for purpose and meet current legislation and standards. You'll work in collaboration with the project design team to arrive at appropriate process solutions adopting the principles of optimised plant performance and ensuring engineering design standards are followed.Responsibilities will include:Undertake process design of Wastewater solution and sewerage systems that achieve the goals of Anglian Water in terms of customer, environment, and efficiency. Be responsible to produce technical deliverables required these include, but are not limited to: Technical schedules and data sheets.Engineering calculations (hydraulic calculations, pump calculations, mass balance calculation, RICS calculations, etc.).Particular specifications for engineering subcontracts.Working closely with the supply chain and performing technical bid analysis of their designs.Oversee key outputs including process calculations, hydraulics, unit processes, pump calculations, capacity calculations, data sheets and technical bid analysis of 3rd party process equipment.Communicate effectively at all relevant levels to ensure that the need to deliver technical excellence is understood and implemented.Escalate issues that may impact on time/cost/quality before they become problems or exceed agreed timescales.Support the drive towards excellence in H&S, demonstrating applied knowledge and skills to produce safe designs to discharge your obligation according to CDM Regulations, standards, and accepted codes of practice.Maintain close links with other Engineering teams to ensure smooth interfaces between disciplines; manage gaps/overlaps & share best practice.Skills, Qualifications & Experience:You'll be educated to degree level in wastewater process science/engineering related subject and have experience of process engineering in wastewater on large scale projects.With strong communication skills, you'll have excellent stakeholder management skills and champion collaboration to tackle challenges and obstacles which could hinder our objective of outperformance. Demonstrating strong IT skills, you'll marry your technical and people skills to deliver the best process engineering facility to your stakeholders on aTPBN1_UKTJ

Fire & Security EngineerA varied workload, a patch that keeps you close to home most days, and overtime and commission on top of a solid salary.This is a Fire & Security Engineer role with a growing company that genuinely looks after its engineers.As a Fire & Security Engineer you will service, maintain and fault-find fire alarm and security systems across a range of client sites, keeping them compliant and fully operational. Alongside the day-to-day service work, you will take on remedial works, system upgrades and small works installations, from extending existing systems through to fitting smaller standalone ones, so no two weeks look quite the same. Most of the work is in and around Peterborough and the surrounding counties, with the occasional national site, so you stay close to home most of the time. Joining a growing company, you will be a key part of a tight-knit service team, trusted to do the job properly and look after the client while you are there.Job ResponsibilitiesServicing, maintaining and fault-finding fire alarm and security systems across a range of client sitesCarrying out remedial works, system upgrades, additions and minor modifications as neededUndertaking small works installations, including extensions to existing systems and smaller standalone fire and security systemsMaking sure every system you service, repair or install meets regulatory and company standardsKeeping accurate service records, including test results, certificates, as-fitted drawings and system documentationWorking closely with the service team and fellow engineers to deliver timely, effective supportProviding technical support and clear advice to clients, with a high standard of customer serviceResponding to call-outs on a one-in-five-week standby rotaSkills and ExperienceTo succeed as a Fire & Security Engineer you will need:A minimum of four years' proven experience servicing and maintaining fire and security systemsStrong technical knowledge of industry-leading fire alarm and security systemsExcellent problem-solving skills and a sharp eye for detailClear communication skills and a genuine focus on customer serviceA strong work ethic and a positive, can-do attitudeThe ability to work well both independently and as part of a teamAn eagerness to learn, with the adaptability to handle varied work across different sitesA full UK driving licencePay and BenefitsA salary of up to £40,000Overtime paid at time and a half for on-site work beyond 4.30pmA call-out rota of just one week in five, with £135 per week standby pay and door-to-door paid at time and a half on call-outTravel time paid beyond the first 30 minutes each way, at the standard rateA commission incentive schemeA company van for business use20 days' annual leave, plus 8 bank holidays and a day off for your birthdayAll power tools and testing equipment provided, with engineers supplying their own hand toolsUniform providedQuarterly team socialsTraining, development and genuine career progression within a growing companyReady to apply?Good fire and security engineers are in high demand, and the best ones want more than just a wage. This role offers variety, a local patch, strong earnings through overtime and commission, and a growing company that backs its engineers and helps them progress. If you are an experienced Fire & Security Engineer who takes pride in doing the job right, this is one worth a conversation. Apply now.TPBN1_UKTJ

Applications Engineer / Internal Sales Executive / Technical Sales Support Engineer required to join aleading engineering supplier.The successful Applications Engineer / Internal Sales Executive / Technical Sales Support Engineer will support external sales teams and customers by preparing technical proposals, specifying pump solutions, and offering application advice across the water industry, wastewater treatment, industrial manufacturing, food & beverage, pharmaceutical, and steel sectors. This role is office-based in Peterborough with some on-site involvement when required.The Applications Engineer / Internal Sales Executive / Technical Sales Support Engineer will ideally have experience working with pumps, rotating equipment, fluid-handling systems, or mechanical process equipment, but candidates with experience supporting any technical mechanical product, such as valves, compressors, dosing and filtration sold into the water industry will also be considered. Full product training provided.Package£30,000 £40,000 depending on experienceBonus scheme25 days holiday plus bank holidaysPension schemeAdditional benefitsApplications Engineer / Internal Sales Executive / Technical Sales Support Engineer RoleProvide technical selection and application support for pumps and mechanical equipment across water, wastewater, industrial, food & bev, pharma, and steel sectors.Produce quotes, proposals, and technical/commercial documents.Review enquiries, interpret drawings/specs, and size pumps/mechanical equipment.Work with suppliers, engineering, service, and external sales teams to build viable solutions.Advise customers on product suitability, system performance, and support basic troubleshooting.Maintain CRM records, manage enquiries, and support continuous improvement in internal sales.Applications Engineer / Internal Sales Executive / Technical Sales Support Engineer RequirementsKnowledge of pumps, rotating equipment, valves, compressors, dosing, filtration, and mechanical systems used in water, wastewater, industrial, food & beverage, pharma, and steel sectors.Experience in applications, internal sales, sales engineering, technical support, or project engineering.Ability to read engineering drawings, interpret specs, and understand performance curves.Strong communication, problem-solving, and customer-facing confidence.Good IT and CRM skills with high attention to detail.Engineering qualification preferred; must be able to commute to Peterborough.TPBN1_UKTJ

SureserveSureserve mission is to be the trusted partner of choice to the social housing and related public sector in delivering essential and affordable heating, energy savings, and compliance solutions.We are playing a key and progressive role in decarbonisation, always delivering for customers, employees, residents and the environment with safety, integrity and respect at the forefront of everything we do.We provide trusted high-quality solutions that focus on energy efficiency, warm, safe, and compliant homes, and an improved quality of life for residents.With a Nationwide reach, regional and local relationships and expertise, and commitment to excellent client service we are set up to be a trusted partner for now and the future.Sureserve Compliance CentralWe are a national company offering market leading heating & hot water solutions from a network of regional offices across the East of England and the Midlands, strategically positioned to ensure comprehensive coverage and uncompromised access to our clientsWe are seeking an experienced gas engineer to join our busy team to carry out service, and repairs on domestic heating and hot water systems for our customers.Overview of Role:The primary responsibility of the Heating Engineer will be to maintain and repair heating systems in our clients' properties. They will ensure that the heating & hot water systems are operating efficiently and safely, and that any repairs are completed in a timely manner ensuring customer satisfaction.Key Responsibilities: Carry out service and maintenance works on a variety of domestic properties across the region.Ensuring high levels of customer care in dealing with clients and tenants to meet the required quality standards.Communicate updates and progress of work, completing the required paperwork electronically and manually.Ensure all Health and Safety requirements and legislation, including Risk Assessments, Safe Systems of Work and COSHH Records, are adhered to during your daily work.To comply with stock ordering and auditing procedures so relevant parts are available to fulfil job requirements.Key Attributes & Requirements: Gas qualifications are essential for this role including as a minimum CCN1, CENWAT, HTR1, CKR1.Out of Hours evening and weekend cover on a rota basis is required as part of this roleA friendly and professional attitude to build strong relationships with clients & tenantsIt is important that we complete all the appropriate criminal and reference checks before you start working with us.Working hours are: 5 days per week (Mon - Fri) 8am to 5pm - 40 hrs1 hour for lunch daily, call out rota to go on doing evenings & weekend work.What We Offer: Company vehicle and fuel cardSupport provided for professional qualificationsEmployee wellbeing programme, occupational health support, telephone support- counselling for staffService level awarded annual leaveEnhanced maternity & paternity packagesDental/Healthcare cash planCycle to Work SchemeElectric Vehicle Leasing SchemeGender & Equality Working GroupSureserve Academy- a platform for development, career progressionEmployee Voice programmeSocial activities for all of our TeamsSureserve Legends- celebrating the fantastic ways in which our employees live our values.Sureserve is committed to creating a diverse and inclusive workplace. We celebrate individual differences and believe that they contribute to our collective success. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.As part of our commitment to Inclusivity, we offer reasonable adjustments throughout the recruitment process for individuals who may require them. If you feel you need any adjustments, please contactSuccessful applicants will be subject to eligibility checks including the right to work in the UK and DBS checks.Join us in our mission to deliver excellence across the UK.TPBN1_UKTJ

Electrical Installation EngineerWe are currently seeking a hardworking and resourceful Electrical Installation Engineer to join our dynamic team of highly skilled Engineers. The role requires a self-motivated, practical problem solver with good communication skills.A key activity for this role will be to survey, install, commission and support site based control systems and equipment for one of our key clients. Predominantly electrical biased but there will be some elements of PLC programming (training will be provided). You could be working alone but other times with another engineer or as part of a team. The candidate will be responsible for ensuring work is completed to the highest standard within agreed deadlines.Whilst the majority of the work will be within standard working hours this operational role requires you to be flexible and will involve extensive travel to sites (approx. max of 3 hours away). Some time away from home is to be expected but it is not planned to exceed 20% of the working week. Hotels will be provided for any commute times over 1.5 hours.Full-time position (08:30-17:15 Monday to Thursday and 08:30-16:00 on Fridays)What we are looking for:- Electrical qualifications C&G, BTEC, NVQ3, ONC or HNC/HND, 18th edition required.- ECS Gold card holder- Previous experience in a service & support, electrical installation or maintenance role.- Electrical design including EPlan, AutoCAD or equivalent would be advantageous.- Control Panel design, manufacture or electrical installation skills.- Experience of equipment installation and commissioning such as PLC'sWhat we require from you:- A minimum of 2 years of practical experience- Pervious solid understanding of electrical diagrams for control panel wiring or electrical installation.- Level 3 Electrical Installation (2365)- Level 3 Requirements for Electrical Installations (BS7671:2018)- Good verbal and written communication skills- Clean UK Driving License- Must be eligible to work in the UKWhat you will get in return- Auto enrolment pension scheme (including Salary Sacrifice/Exchange for Pension Payments if desired)- 25 days holiday (rising to 30 days after 5 years service)- Private Health Scheme (after 1 year service)- Death in Service Plan (after 5 years service)- Access to our Wellbeing programme operated through COGG (https://www.coggroup.co.uk)- Access to our Training Hub (various training courses available)- Free parking at all our offices (Subject to availability & any company parking policies or parking rotas that may be in effect)- Access to company vans or pool cars (company car scheme also available)- Access to Perkbox (https://join.perkbox.co.uk) This gives employees access to discounted shopping, eating out, cinema and even holidays- Free social events, team building days and Christmas party weekend break (partners included).- TIL / Overtime and expenses scheme- Adsyst hold key worker statusOur companyAt Adsyst Automation Ltd we understand that our continued success is down to our dedicated team, therefore, we invest time and effort in each individual; training and assisting with their personal and professional development, encouraging their strengths while offering a good work/ life balance.Adsyst Automation Ltd has been providing complex Control Systems for Process Control, Automation and Telemetry to customers worldwide for over 35 years. We approach each project with a fresh outlook and use our knowledge and partnerships to stay a step ahead of the competition, offering the most advanced, innovative and cost-effective solutions.At Adsyst Automation Ltd, we embrace diversity and actively seek individuals with unique perspectives to join our team. Our goal is to create a sustainable future by fostering a diverse environment where everyone can thrive. We value inclusion and are committed to providing equal opportunities for all, regardless of race, religion, gender, or background.Join us to contribute to our vibrant culture and make a difference!Other positions are available in this office, as well as our other offices within the UK. Please see our website for more information at: www.adsyst.co.ukTPBN1_UKTJ

Technical Sales Engineer (Machine Tooling)£40,000 - £58,000 + Company benefits + Training + Monday - Friday + Field Based + Company CarPeterborough, CambridgeshireAre you a Technical Sales Engineer or similar with a background in precision engineering looking for an autonomous, customer-facing role with a growing manufacturer offering specialist projects, and a company car?For over 50 years, this company has been supplying bespoke CNC machining and manufacturing solutions to industries including aerospace, medical, and motorsport. Due to continued growth, they are now looking to expand their commercial team.In this varied role, you will split your time between customer visits and office-based activities, working closely with clients and engineers to deliver tailored machining solutions. You will support projects from initial enquiry through to quotation, provide technical consultation, and help drive business growth through strategies developed alongside the Operations Director.This role would suit a Technical Sales Engineer or similar with a precision engineering background looking for a commercially focused role offering autonomy and long-term development.The roleMonday - Friday 9am - 5pmConsult clients throughout deliveryDevelop current and develop new business opportunities through varied strategiesPrepare quotations and support projects from enquiry through to order placementAttend customer sites to understand requirementsThe PersonTechnical Sales Engineer or similarPrecision Engineering backgroundWilling to Travel (nationwide patch)Reference number: BBH25711Technical Sales, Business Development, CNC Machining, Precision Engineering, Machine Tooling, Manufacturing, Metalwork, Medical Devices, Motorsport, Quotation, Account Management, New Business, Customer Relations, Peterborough, Cambridgeshire, Huntingdon, Stamford, Spalding, Wisbech, March, Grantham, Corby, Lincolnshire, East Midlands, East Anglia.If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV.We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.TPBN1_UKTJ

SureserveSureserve mission is to be the trusted partner of choice to the social housing and related public sector in delivering essential and affordable heating, energy savings, and compliance solutions.We are playing a key and progressive role in decarbonisation, always delivering for customers, employees, residents and the environment with safety, integrity and respect at the forefront of everything we do.We provide trusted high-quality solutions that focus on energy efficiency, warm, safe, and compliant homes, and an improved quality of life for residents.With a Nationwide reach, regional and local relationships and expertise, and commitment to excellent client service we are set up to be a trusted partner for now and the future.Sureserve Compliance CentralWe are a national company offering market leading heating & hot water solutions from a network of regional offices across the East of England and the Midlands, strategically positioned to ensure comprehensive coverage and uncompromised access to our clientsWe are looking for a skilled and reliable, gas qualified Installation Engineer to carry out the install of domestic & hot water systems.Overview of Role:The Installation Engineer will be responsible for the installation and maintenance of gas heating and hot water solutions, ensuring safety measures are met, and providing professional advice to our clients on appliance usage. The right candidate will focus on delivering excellent customer service and maintaining a high standard of work.Key Responsibilities With a friendly and professional attitude, you will need to build strong relationships with our clients and their tenants, ensuring all works meet the required standards.Carry out heating and hot water installations works on properties across the region.Ensure high levels of customer care in dealing with clients and tenants to meet the required quality standards.Key Attributes / Requirements CCN1 qualified gas installation experience in domestic heating and hot water systems.It is important that we complete all the appropriate criminal and reference checks before you start working with us.What We Offer: Company vehicle and fuel cardUniform & mobile deviceSupport provided for professional qualificationsEmployee wellbeing programme, occupational health support, telephone support- counselling for staffService level awarded annual leaveEnhanced maternity & paternity packagesDental/Healthcare cash planCycle to Work SchemeElectric Vehicle Leasing SchemeGender Equality Working GroupSureserve Academy- a platform for development, career progressionEmployee Voice ProgrammeSocial activities for all of our TeamsSureserve Legends- celebrating the fantastic ways in which our employees live our values.Sureserve is committed to creating a diverse and inclusive workplace. We celebrate individual differences and believe that they contribute to our collective success. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.As part of our commitment to Inclusivity, we offer reasonable adjustments throughout the recruitment process for individuals who may require them. If you feel you need any adjustments, please contactSuccessful applicants will be subject to eligibility checks including the right to work in the UK and DBS checks.Join us in our mission to deliver excellence across the UKTPBN1_UKTJ

Location: Hybrid / Multi-Site ideally based near Peterborough, Lincoln, Scunthorpe, Hull, Doncaster, Grantham or the East Coast corridorSalary: Circa £57,000 + £6,000 car allowance, with higher salary considered DOEJob Type: Permanent, Full-TimeSector: Renewable Energy / Anaerobic Digestion / Process EngineeringAre you an experienced EC&I Engineer, Electrical Engineer, Controls Engineer, Instrumentation Engineer, Senior Electrical Engineer, High Voltage Engineer, Control Systems Engineer or Automation Engineer looking for a senior technical role with real influence?This is an excellent opportunity to join a growing renewable energy business as its in-house Electrical, Control and Instrumentation specialist , supporting a portfolio of operational anaerobic digestion and process plant sites.This is not a routine site maintenance role. As Group EC&I Engineer , you will take ownership of electrical and control standards across multiple sites, supporting infrastructure upgrades, control system improvements, technical troubleshooting, supplier management and long-term plant reliability.You will play a key role in shaping group-wide EC&I standards, improving site consistency and supporting future technical development across renewable energy and process plant operations.Whats in It for You?Circa £57,000 salary£6,000 car allowanceHigher salary considered for the right candidatePermanent, full-time positionSenior group-level EC&I roleHybrid working with multi-site responsibilityOpportunity to influence EC&I standards across multiple operational sitesVaried work across renewable energy, anaerobic digestion and process engineeringInvolvement in infrastructure upgrades, reliability improvements and technical projectsLong-term opportunity within a growing renewable energy businessLocation and Working PatternThis is a hybrid, group-wide role covering operational sites across East Yorkshire, North Lincolnshire and Cambridgeshire / Peterborough .Your home site would usually be the company site closest to your home location. However, you will need to travel across the group as required, particularly where a specific technical issue, infrastructure project, upgrade or site requirement needs your support.For ease of travel, this role would suit someone based along the eastern side of the country, ideally within reasonable reach of the main operating areas.Suitable locations could include Peterborough, Lincoln, Scunthorpe, Hull, Doncaster, Grantham, Boston, Spalding, Newark, Grimsby, York, Beverley, Huntingdon, Cambridge or surrounding areas .There may also be occasional escalation support as part of the role. This would not usually be the first point of contact, as issues would normally be escalated through site engineering, plant management and maintenance management before reaching the Group EC&I Engineer. In many cases, this may involve phone-based technical support or remote advice rather than site attendance.The RoleAs Group EC&I Engineer, you will act as the companys in-house specialist for electrical, control and instrumentation engineering.You will provide technical support and troubleshooting across existing installations, maintenance activities, repairs, equipment replacement, site upgrades and new infrastructure projects.You will develop group-wide technical standards and standard EC&I solutions to improve consistency across current and future assets. You will assess existing infrastructure, identify obsolescence and recommend suitable upgrade plans.A key part of the role will involve working with internal engineering teams and external EC&I vendors to standardise SCADA systems, improve process control and support automation of reporting systems linked to reliability and plant performance.Key ResponsibilitiesDevelop company-wide EC&I standards, specifications and technical solutionsSupport High Voltage and Low Voltage infrastructure across operational sitesReview existing assets and identify obsolescence, reliability and upgrade requirementsStandardise SCADA, PLC, HMI, DCS and control system approachesSupport automation and reporting improvements linked to process reliabilityProvide EC&I troubleshooting support for existing and new installationsSupport maintenance, repair and replacement of EC&I equipment and componentsLiaise with Distribution Network Operators on High Voltage connectionsSupport supplier negotiation, design standards and infrastructure contractsProduce and update electrical safety procedures and company standardsCreate EC&I specifications and technical supplier requirement documentsReview supplier and installer documentationInvestigate and resolve technical problemsProduce technical assessment reportsManage technical interfaces with EC&I suppliers, installers and internal teamsSupport health and safety procedures, risk assessments and site safety standardsAbout YouYou will be a technically credible EC&I professional with strong experience in industrial, process, energy, utilities, manufacturing or similar environments.You may currently be working as an EC&I Engineer, Senior EC&I Engineer, Electrical Engineer, Senior Electrical Engineer, Controls Engineer, Instrumentation Engineer, Control Systems Engineer, Automation Engineer, HV Engineer or Electrical Project Engineer .You will ideally have experience across:EC&I engineering design, maintenance or project deliveryHigh Voltage power systemsLow Voltage power distributionIEE Wiring RegulationsMotor Control CentresProcess instrumentationSCADA systemsPLC, HMI or DCS control systemsElectrical safety systems and standardsDNO liaison and High Voltage connectionsSupplier, installer or contractor technical managementExperience within anaerobic digestion, biogas, gas production, renewable energy, utilities, chemical, water, wastewater, food manufacturing, FMCG or wider process plant environments would be highly desirable.QualificationsYou will ideally hold an NVQ Level 4 Electrical or Control & Instrumentation apprenticeship , or an equivalent qualification.Highly desirable experience or qualifications include:High Voltage networks and Distribution Network Operator experienceCompEx 14 for electrical engineers working in hazardous areasCompEx 11 for engineers working in hazardous areasStrong knowledge of electrical safety standardsExperience with SCADA, PLC, HMI or DCS systems from major manufacturersPractical experience in EC&I design, maintenance and construction projectsWhy Apply?This is a rare opportunity to step into a senior group-level EC&I role within renewable energy.You will have the chance to shape technical standards, improve reliability, influence infrastructure decisions and support the development of multiple operational process plant sites.For an experienced EC&I Engineer who wants more technical ownership, broader influence and genuine involvement in plant improvement, this is an excellent opportunity.Apply NowIf you are an experienced EC&I Engineer, Electrical Engineer, Controls Engineer, Instrumentation Engineer, Senior Electrical Engineer, High Voltage Engineer, Control Systems Engineer or Automation Engineer , apply today for a confidential conversation.TPBN1_UKTJ

Location: Field-based / Remote, with travel across Europe and the Middle EastSalary: competitive DOE, plus overtime and overseas travel allowancesAre you an experienced Field Service Engineer, Commissioning Engineer, Service Technician or Multi-Skilled Engineer looking for a high-earning international role with major project exposure, overtime and excellent benefits?This is a standout opportunity to join a global engineering business delivering advanced combustion, fired equipment and environmental technology solutions to customers across the oil, gas, petrochemical, power generation and industrial sectors.The role will involve commissioning, troubleshooting, maintenance, fault analysis and installation supervision on highly engineered combustion and fired equipment across Europe and the Middle East.This is ideal for someone who enjoys technical problem-solving, international travel, working on customer sites and taking ownership of complex engineering challenges.Whats in it for you?Salary of £50,000 £60,000Overtime availableOverseas travel allowance: £50 per night in EuropeOverseas travel allowance: £100 per night in high-risk countries2 x annual bonus schemes12% employer pension contribution27 days holiday plus bank holidaysBUPA private healthcareMedicash healthcare supportCritical illness coverEmployee Assistance ProgrammeGym membership / wellbeing benefitsLife insuranceProfessional training and development opportunitiesInternational travel across Europe and the Middle EastOpportunity to work with world-class engineering teamsSupportive, safety-driven working cultureRegular social events and strong team environmentThe RoleAs a Field Service Engineer / Commissioning Engineer, you will carry out site-based commissioning, maintenance, troubleshooting and technical support on combustion and fired equipment.You will work closely with customers, end users and internal engineering teams to ensure equipment is commissioned, maintained and supported safely, effectively and professionally.The role will involve extensive travel, potentially over 200 days per year, usually for periods of 12 weeks at a time, with some longer trips of up to 6 weeks depending on project requirements.Key responsibilities will include:Carrying out on-site commissioning, maintenance, troubleshooting and fault analysisSupporting installation supervision and retrofit equipment activitiesWorking on combustion and fired equipment including flare systems, boiler burners, process burners, thermal oxidisers and vapour recovery systemsPreparing RAMS, site visit reports, timesheets and client documentationReading and interpreting P&IDs, electrical schematics and mechanical drawingsSupporting site turnarounds, outages and service contractsDelivering technical training to end-user personnel both on site and in classroom settingsIdentifying opportunities for aftermarket spares, service support and additional customer solutionsBuilding strong relationships with customers and end usersWorking safely at all times in line with company and customer health and safety proceduresAbout YouYou will need to be a practical, hands-on Field Service Engineer or Commissioning Engineer with strong technical capability and the flexibility to travel extensively.This role could suit someone from combustion, oil and gas, petrochemical, power generation, process plant, industrial services, controls, mechanical, electrical, instrumentation or multi-skilled engineering backgrounds.You will ideally have:Experience as a Field Service Engineer, Commissioning Engineer, Service Engineer, Multi-Skilled Engineer or Service TechnicianStrong mechanical, electrical, instrumentation or controls knowledgeExperience with PLC control systems, fault finding or industrial control systemsAbility to read P&IDs, electrical schematics and mechanical drawingsExperience working on process plant, combustion systems, fired equipment, burners, flares, thermal oxidisers, boilers or similar industrial equipmentStrong fault-finding and troubleshooting skillsGood verbal and written communication skillsStrong computer skills for reports, RAMS, timesheets and documentationA proactive, self-motivated approachWillingness to travel extensively across Europe and the Middle EastConfidence working at height, in confined spaces and potentially offshore environmentsStrong commitment to health and safetyUseful but not essential:Previous combustion experienceOil and gas, petrochemical, refinery, power generation or energy sector experienceExperience supervising outages, turnarounds, installations or retrofit projectsTime-served background working away from homeExperience delivering customer training or site-based technical supportLocation / TravelThis is a field-based / remote role involving extensive international travel across Europe and the Middle East.The companys UK base is in the Stamford / Oakham / Rutland area, but candidates with the right field service, commissioning and travel flexibility will be considered from a wider UK location.Candidates must be comfortable with regular overseas travel, periods away from home and working on customer sites in demanding industrial environments.Apply NowIf you are an experienced Field Service Engineer, Commissioning Engineer, Service Engineer, Multi-Skilled Engineer or Service Technician looking for a high-earning international role with overtime, travel allowances, excellent benefits and major technical variety, please apply today for immediate consideration.TPBN1_UKTJ

.NET Support Developer - Birmingham (Tech stack: .NET Support Developer, C#, SQL Server, Windows, Programmer, Full Stack Engineer, Architect, .NET Support Developer, Urgent) Be the first of your friends to declare, "I love where I work!" and actually mean it. Laugh hard and work hard with some of the best and brightest in the tech industry. Our client has created the world's first marketplace for live experiences by developing the technology that lets anyone create, share and find new things to do. Currently 180 countries host events using their platform, with over 1.5 million events taking place every year and 5 million tickets being processed every month! They are looking for .NET Support Developer to help them support their set of products. They have been extremely picky about assembling a team of smart, humble people who are passionate about supporting amazing products. The ideal .NET Support Developer candidates should have strong experience with: .NET, C#, SQL Server and Windows. Their benefits include the following: • Bonus (15%)., • Generous stock option plan., • Medical, dental and vision insurance., • Company pension., • Choice of computer and gear., • All the coffee delivered to your desk you can order!, • Snack filled kitchen., • Awesome work environment at a company with a huge vision., • Killer office with an onsite gym and games room! Location: Birmingham, UK Salary: £50,000 - £60,000 + Bonus + Pension + Benefits Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions! NOIRUKTECHREC NOIRUKREC