Trabajos assembler en Los Angeles, CaliforniaCrear alertas

Job Description Cabinet Assembler (Woodworker) – Immediate Openings Anaheim, CA $25–$30/hr DOE Monday–Friday | 6:00 AM – 2:30 PM Established custom cabinet manufacturer seeking an experienced Cabinet Assembler for a temporary full-time assignment with potential for long-term opportunity based on performance and workload. Responsibilities • Assemble custom cabinets from cut lists and blueprints, • Build cabinet boxes, doors, drawers, panels, and frames, • Use hand and power tools for assembly, • Perform light cutting and fitting using table saws and miter saws, • Inspect finished products for quality and accuracy, • Maintain a clean and safe work area Requirements • Minimum 2 years of recent cabinet assembly or woodworking experience, • Recent production cabinet shop experience required, • Daily experience assembling custom cabinet components from cut lists (not prefabricated cabinets), • Ability to read blueprints and technical drawings, • Experience using woodworking saws and hand/power tools, • Ability to lift up to 50 lbs BBSI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Company DescriptionBBSI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. California applicants: to see how we protect your data, visit our website at https://www.bbsi.com/privacy-notice-california-applicants.BBSI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.\r\nCalifornia applicants: to see how we protect your data, visit our website at https://www.bbsi.com/privacy-notice-california-applicants.

Job Description Auto-Chlor is Hiring an Appliance Assembler – Join Our Van Nuys, CA Location! Looking for a stable, hands-on career where your mechanical skills are valued and you can grow? Auto-Chlor is hiring an Appliance Assembler to join our team. Since 1938, we’ve built our reputation on reliable service, innovative equipment, and long-term customer partnerships. If you enjoy working with tools, fixing things, and staying busy throughout the day, this is a great opportunity to build a lasting career. Pay Range $46,000 - $56,000 per year or more of total compensation Schedule Monday – Friday 7am AM – 3:30 PM Overtime available depending on business needs What You’ll Do In this role, you’ll work with your hands daily to rebuild and restore commercial dishwashing equipment, ensuring it operates at peak performance for our customers. This is a great fit for someone who enjoys problem-solving, mechanical work, and seeing the results of their effort. Why Join Auto-Chlor? • Competitive pay at $22 per hour plus consistent overtime opportunities, • Full benefits package: Medical, Dental, Vision, Life Insurance, 401(k), Profit Sharing, PTO, and Paid Holidays, • Paid, hands-on training – no industry experience required, • Clear path for advancement and long-term career growth, • Work with a supportive team that values hard work and reliability Key Responsibilities • Take apart returned equipment and evaluate components for reuse, • Clean, repair, and reassemble machines to restore full functionality, • Test equipment to confirm it meets performance and safety standards, • Identify mechanical problems and complete necessary fixes, • Use critical thinking to troubleshoot and resolve issues efficiently, • Gain exposure to field work by assisting with installations and service support What We’re Looking For • Valid driver’s license (must have a license for at least 3 years), • Mechanically inclined and comfortable using hand tools, • Self-motivated with the ability to work independently, • Open to occasional on-call rotation, • Strong work ethic and a team-first attitude About Auto-Chlor With over 140 locations nationwide, Auto-Chlor is a leader in manufacturing, installing, and servicing energy-efficient commercial dishwashing systems. We support industries ranging from restaurants and hospitality to healthcare and food processing—helping businesses operate safely, efficiently, and sustainably.

Job Description Assembler / Forklift Operator (Commerce, CA) Pay: $18–$21/hr Schedule: Monday–Friday Hours: 6:30am–3:00pm Start: ASAP We’re looking for a reliable Assembler to join a manufacturing team in Commerce. This role involves assembling doors and kitchen cabinets, using hand tools, and supporting production as needed. What We’re Looking For • 2-4 years of forklift experience, • Hand tool experience for assembly work, • Carpentry background is a plus, • Ability to work full-time, Monday–Friday What You’ll Do • Assemble doors, cabinets, and related components, • Use hand tools safely and efficiently, • Support warehouse and production tasks, • Operate forklift

Job Description If interested and you meet the qualifications, apply here directly or text Mike Dominguez at 562 566 4712 Job Title: Cabinet Assembler, Carpenter, Finish Carpentry, Construction, Wood worker Job Description Join a dynamic team in the automotive manufacturing industry as a Cabinet Assembler, where you will be an integral part of assembling components for ambulances. This role offers a unique opportunity to contribute to the production of essential emergency vehicles. Responsibilities • Assemble cabinets with precision and accuracy., • Install cabinets into ambulances, ensuring secure and proper fit., • Perform trim work and light painting tasks., • Engage in furniture assembly tasks as required., • Work with blueprints to guide the assembly and installation process. Essential Skills • Proficiency in reading blueprints., • Experience in production work and assembly., • Skilled in using hand and power tools., • Expertise in cabinetry and cabinet making., • Ability to take accurate measurements with a tape measure. Additional Skills & Qualifications • Experience in carpentry and woodworking., • Knowledge of furniture assembly processes. Why Work Here? This position offers a stable, long-term career path with potential for upward mobility in an essential business sector. Join a team where your skills are valued and contribute to meaningful work in the production of emergency vehicles. Work Environment Work in an automotive manufacturing setting, utilizing advanced tools and technologies. This role requires precision and attention to detail, with a focus on accurate measurements and quality assembly. Job Type & Location This is a Contract to Hire position based out of South El Monte, CA. Pay and Benefits The pay range for this position is $20.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South El Monte,CA. Application Deadline This position is anticipated to close on Jul 14, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Mechanical Assembler No experience needed!! Job Description This role offers an excellent entry point into manufacturing as a Mechanical Assembler, with no prior experience required. You will assemble industrial electric vehicles and components used in warehouses and production facilities, working as part of a team on a structured assembly line. The position focuses on hands-on mechanical work, using hand and power tools to build high-quality equipment in a large manufacturing environment. Responsibilities • Work in teams of two on an assembly line to assemble industrial electric vehicles and related components., • Use hand tools and air (pneumatic) tools to install components onto the vehicle chassis (body)., • Install and connect wiring harnesses to terminals according to assembly requirements., • Adjust components and assemblies to meet specified operating requirements and quality standards., • Use testing devices, after training, to check equipment functionality and ensure proper operation., • Follow assembly drawings, schematics, and instructions when available to complete builds accurately., • Support production goals by maintaining steady workflow and communicating any issues to the appropriate team members., • Handle materials and components safely, including lifting items up to 50 lbs as needed during assembly., • Maintain a clean, organized work area and follow all safety procedures in the manufacturing facility. Essential Skills • High school diploma or GED., • At least 6 months of experience in physically demanding work, such as warehouse, production, or similar environments., • Comfort using hand tools and air (pneumatic) tools to assemble parts and components., • Ability to lift up to 50 lbs safely and repeatedly as part of daily tasks., • Willingness to learn mechanical assembly processes and follow detailed instructions., • Ability to work effectively as part of a small team on an assembly line., • Basic familiarity with tools and mechanical concepts, whether from work or personal hobbies. Additional Skills & Qualifications • Experience or hobbies involving working on cars, motorcycles, or similar mechanical projects are highly valued., • Ability to read assembly drawings, blueprints, or schematics is a strong plus., • Exposure to production, construction, or installation environments is beneficial., • Interest in developing skills in mechanical assembly, wiring, and equipment testing., • Reliability and punctuality for consistent first-shift work in a manufacturing setting. Why Work Here? This opportunity offers a clear path for long-term employment, starting in a contract role with the potential to transition to a permanent position. Once hired directly, employees can access a comprehensive benefits package that typically includes medical, dental, and vision coverage, company-paid life insurance, personal and sick time, vacation time, paid holidays, and a 401(k) plan with a competitive company match. The organization supports skill development through hands-on training, providing a stable environment where motivated individuals can grow their mechanical and production experience while contributing to the manufacture of high-quality industrial vehicles. Work Environment This position is based in a large manufacturing facility with approximately 200 employees across assembly, welding, machining, warehouse, and office departments. The role follows a first-shift schedule, working Monday through Friday from 6:00 a.m. to 2:30 p.m. You will work on an assembly line using hand tools, power tools, and air (pneumatic) tools, and you will be trained to use testing devices for equipment verification. The environment is active and hands-on, requiring regular lifting of up to 50 lbs and consistent adherence to safety practices in a production setting. Job Type & Location This is a Contract position based out of Anaheim, CA. Pay and Benefits The pay range for this position is $18.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Anaheim,CA. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Temptron Engineering is seeking a small parts production Assembler in the aerospace industry, looking for energetic full time employees to become an integral part of our team! You will perform assembly tasks as well as identify areas of improvement to increase efficiency. We are willing to train the right candidates for long term employment. Responsibilities: • Work with a team to assemble entire products or components, • Rotate through tasks for specific production processes, • Conduct quality inspections on products and parts, • Prepare finished products for shipment, • Maintain a clean and orderly work area Qualifications: • Previous experience in manufacturing, assembly, or other related fields is a plus, • Familiarity with small assembly hand tools and equipment, • Ability to handle physical workload, • Ability to work well in teams, • Ability to thrive in a fast-paced environmentCompany DescriptionCommercial & Military Aerospace Design and Manufacturing of thermocouple sensors We offer long term employment, 401K with company percentage participation, Sick and Vacation days, company subsidized Medical, along with Dental and Vision employee add-ons.Commercial & Military Aerospace\r\nDesign and Manufacturing of thermocouple sensors \r\nWe offer long term employment, 401K with company percentage participation, Sick and Vacation days, company subsidized Medical, along with Dental and Vision employee add-ons.

Job DescriptionAssembly Technician Location: Cerritos Schedule: Monday–Friday, 7:00 AM – 3:45 PM Pay Rate: $21.50 Reports To: Plant SupervisorPosition Summary We are seeking a reliable and detail-oriented Assembly Technician to join our team. In this role, you will assemble manufactured products and ensure they are built and packed according to company specifications. This position requires strong mechanical aptitude, attention to detail, and the ability to work collaboratively in a fast-paced production environment.Key Responsibilities • Assemble machinery, fabricated metal products, electrical equipment, appliances, and related items according to instructions, • Read and interpret blueprints, schematics, and technical documents to complete assemblies accurately, • Operate various machines and hand tools to perform assigned tasks, • Maintain logs, records, and reports related to production, maintenance, and product quality, • Perform basic equipment and conveyor maintenance and repairs, • Manage and monitor inventory of tools, parts, and supplies; coordinate with materials handler as needed, • Conduct periodic quality checks to ensure products meet company standards; troubleshoot and report issues, • Move units between production stages (Production ? PDI ? Mounting ? Staging), • Mount units to trailers as required, • Perform other duties as assignedRequired Skills & Abilities, • Ability to read and understand blueprints and schematics, • Proficiency in Microsoft Office or similar software for documentation, • Strong attention to detail and consistency in work quality PandoLogic. Keywords: Assembler, Location: Cypress, CA - 90630 , PL: 603495292

Job Description Job Title: Assembler Job Description This role focuses on assembling and packaging a variety of heavy-duty cases and mid-size flashlights used to protect and store valuable equipment such as cameras and lighting accessories. You will follow technical drawings and work instructions, use hand and power tools, and ensure all products meet quality and safety standards. The position involves working in a clean, production-oriented environment with opportunities to learn new equipment and grow into a long-term role. Responsibilities • Assemble various sizes of heavy-duty cases designed to store and protect equipment such as cameras and lighting accessories., • Assemble mid-size flashlights on a dedicated production line, ensuring all components fit and function correctly., • Follow technical drawings, blueprints, and detailed work instructions to complete assembly tasks accurately and efficiently., • Use hand tools and small power tools, including drills, hammers, and rivet machines, to assemble cases and flashlights., • Add foam inserts and other protective materials to each case according to specifications., • Perform packaging tasks, including taping boxes, shrink-wrapping products, and preparing items for shipment., • Operate or learn to operate pallet jacks and automated shrink wrap machines as needed for material handling and packaging., • Count and track inventory to ensure accurate quantities and support production and shipping needs., • Lift and move materials and finished products weighing between approximately 7 and 35 pounds throughout the shift., • Maintain a clean and organized work area and follow all safety guidelines, including proper use of personal protective equipment., • Inspect assembled products for quality, completeness, and adherence to specifications before packaging or moving to the next stage., • Collaborate with team members and follow direction from supervisors to meet production goals and deadlines. Essential Skills • Experience in assembly, production, light industrial, manufacturing, or distribution environments., • Ability to read and interpret blueprints, technical drawings, and written work instructions., • Proficiency using hand tools such as screwdrivers, hammers, and basic mechanical tools., • Proficiency using power tools such as small drills and rivet machines in a safe and controlled manner., • Mechanical assembly skills, including fitting, fastening, and aligning components., • Ability to perform packaging tasks, including taping boxes and preparing items for shipment., • Capability to lift and handle items weighing up to approximately 40 pounds, with typical lifting between 7 and 35 pounds., • Willingness and ability to pass a drug screen, • Comfort working in a production environment with repetitive tasks while maintaining attention to detail., • Ability to follow safety procedures and use required personal protective equipment. Additional Skills & Qualifications • Previous experience in manufacturing or distribution is preferred., • Familiarity with general labor tasks in a production or warehouse setting., • Experience using pallet jacks and automated shrink wrap machines is a plus., • Comfort working with mechanical components and tools in an assembly environment., • Willingness to work 1st, 2nd, or 3rd shift as assigned., • Strong reliability, punctuality, and ability to work as part of a team. Why Work Here? This opportunity offers a clear path from temporary to permanent employment, providing long-term stability for those who perform well. Permanent employees receive a comprehensive benefits package that includes paid vacation, sick time, and holidays, as well as a 401(k) plan with an immediate company match. The organization supports ongoing growth through a tuition assistance program and promotes a healthy lifestyle with a wellness discount program. Employees enjoy an attractive discount program, including options such as pet insurance, and access to exclusive branded apparel. The location is conveniently situated just minutes from the beach, and a lucrative employee referral program rewards you for bringing in trusted colleagues. You will represent a well-established, reputable brand known for premium products, giving you pride in the work you do each day. Work Environment The role is based in a clean, organized production facility focused on assembling heavy-duty cases and mid-size flashlights. You will work on an assembly line using hand tools, power tools such as small drills, and equipment including rivet machines, pallet jacks, and automated shrink wrap machines. The position involves lifting items typically between 7 and 35 pounds and occasionally up to approximately 40 pounds. Multiple shifts are available, including 1st, 2nd, and 3rd shift options. Safety equipment such as safety glasses, gloves, and high-visibility vests is provided, while employees supply their own steel-toe boots. The environment emphasizes safety, quality, and teamwork while maintaining an efficient, production-driven workflow. Job Type & Location This is a Contract to Hire position based out of Torrance, CA. Pay and Benefits The pay range for this position is $17.50 - $18.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Torrance,CA. Application Deadline This position is anticipated to close on Jul 20, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Electronic Assembler II Torrance, CA On Site Contract $23 to $28 per hour DOE Monday through Friday California based manufacturer specializing in fiber transmission solutions for digital multimedia including video, audio, and data. Our clients span entertainment, broadcast, medical, government, military, transportation, and more Electronic Assembler II We are hiring an Electronic Assembler II to support our Operations team. This is a hands on role supporting advanced electro mechanical product assembly in a fast paced production environment Electronic Assembler II This is not a remote position. Responsibilities • Solder electronic components including SMT and through hole, • Perform prototype assembly per drawings and specifications, • Support production assembly, testing, and inspection, • Perform board level programming and functional testing, • Maintain material inventory and documentation per ISO procedures, • Kit production projects, • Partner with Purchasing and Quality to ensure timely and accurate builds, • Coordinate with suppliers to validate workmanship and part conformance, • Provide soldering best practice guidance as needed, • Follow assembly and test procedures with precision Electronic Assembler II Qualifications • High School Diploma or equivalent, • 3 to 5 years of electronics manufacturing or assembly experience Electronic Assembler II • Strong soldering skills including SMT, through hole, and harnessing Electronic Assembler II • Experience with PCB assembly and testing, • Understanding of IPC A 610 or J STD 001 standards preferred Electronic Assembler II • Ability to read and follow assembly drawings and test procedures, • Strong documentation and communication skills, • Ability to manage multiple priorities and meet deadlinesWork Environment, • Fast paced production setting, • Team driven culture, • ISO regulated manufacturing environment, • Opportunity for growth and professional development If you have strong soldering skills and enjoy hands on electronic assembly work, we want to speak with you. PandoLogic. Keywords: Electronics Assembler, Location: Torrance, CA - 90507 , PL: 603518095

Job DescriptionJob Title: Electromechanical Assembly Technician Job Description We are seeking an Electromechanical Assembly Technician to expertly assemble high-speed turbo motors, generators, and turbo machinery equipment. You will perform sub-assembly and full system-level testing in accordance with applicable drawings, schematics, and specifications for the Aerospace Defense Industry. This role operates on a 1st shift schedule from Monday to Friday, 6am to 2:30pm. Responsibilities • Assemble high precision coil windings, sensors, and electric motor components and sub-assemblies., • Perform soldering of fine wiring., • Encapsulate electrical assemblies., • Follow blueprints, routers, and work instructions to ensure accurate assembly.Essential Skills, • Ability to read and understand blueprints, wiring diagrams, assembly instructions, process routers, and work instructions., • Manual dexterity and the ability to use fine precision tools, fixtures, and testing apparatus., • J-STD-001 and IPC-A-610 certification or equivalent., • 3-5 years of experience in assembling electrical parts within a production environment.Additional Skills & Qualifications, • Experience with prototype, engineering, and production type hardware using sketches and verbal instructions or notes.Why Work Here? Enjoy a comprehensive benefits package including medical coverage through Kaiser, dental, vision, and a 401K plan with a 3% match. Join a team that values employee well-being and offers a supportive work environment. Work Environment The role is situated in a medium manufacturing environment with approximately 120 employees. You will be working specifically in the mechanical assembly department alongside 20 others. Depending on the assembly line, you may be sitting or standing. Please note the presence of glue smells and the requirement for steel-toed safety shoes. Job Type & Location This is a Contract to Hire position based out of Cypress, CA. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cypress,CA. Application Deadline This position is anticipated to close on Jul 17, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description JOB SUMMARY Assists and supports coworkers and performs repetitive Bonding operations to mass-produce commercial aircraft interior components such as galleys and closets for commercial transport aircraft. Must be able to work within the time constraints of the master production schedule and meet requirements dictated by the customer. SUMMARY OF JOB DUTIES - Essential Functions (Other duties and projects may be assigned or requested.) Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions • Promotes cooperation and communication with co-workers, • Places panels and parts in specified relationship to each other, • Follows installation procedures per engineering drawings and requirements, • Understands the concept of utilizing work orders, • Validates panel dimensions and insert locations by dry fitting before installing blocks, angles, doublers, and fittings, • Prepares and organizes tools and parts for use in the manufacturing area, • Maintain safe and effective use of all machine and hand tools as well as a safe work environment, • Mixes and applies adhesives as required, using manufacturers specifications as well as ECI requirements, • Pre-bonds doublers and cut/fold panels using shop aids per approved engineering drawings, • Dry fits and bond’s structure using tooling and shop aids to control the critical surfaces and interface points, • Report any defects to quality assurance and manufacturing engineers, • Must be able to self-inspect personal work and correct discrepancies in a timely manner, • Works at different workstations as production needs require, • Cleans work area, machines, tools, and equipment as required, • Tasks could vary slightly from the various customer galleys & closets, • Performs other duties as assigned by production supervisor GENERAL QUALIFICATIONS – Education, Knowledge, and Experience Education: • A High School diploma is preferred Experience: • Position may be filled with both entry level and experienced candidates, • Some hands on experience is helpful (such as autobody, mechanic, construction helper, etc.) Schedule: • Full-time position Monday - Friday, • 1st shift: 6:00am-3:30pm or 2nd shift: 3:00pm-12:30pm, • Pay rate: $17.50/hr. or $18.00/hr.Company DescriptionPathway Group is a Recruitment and Staffing service dedicated to the Manufacturing Industry. We pride ourselves on being expert recruiters in the space staying true to our manufacturing recruitment vertical. The vast majority of our placements are contract to hire and direct hire placements. Our goal is to add value to the client and candidate. Placing the right candidate into their next career. We focus on positions like mechanical assemblers, electrical assemblers, CNC operators, CMM operators, composite technicians, quality technicians, engineers, managers, etc.Pathway Group is a Recruitment and Staffing service dedicated to the Manufacturing Industry. We pride ourselves on being expert recruiters in the space staying true to our manufacturing recruitment vertical. The vast majority of our placements are contract to hire and direct hire placements. Our goal is to add value to the client and candidate. Placing the right candidate into their next career. We focus on positions like mechanical assemblers, electrical assemblers, CNC operators, CMM operators, composite technicians, quality technicians, engineers, managers, etc.

Job Description Electronic Assembler II Torrance, CA On Site Contract $23 to $28 per hour DOE Monday through Friday California based manufacturer specializing in fiber transmission solutions for digital multimedia including video, audio, and data. Our clients span entertainment, broadcast, medical, government, military, transportation, and more Electronic Assembler II We are hiring an Electronic Assembler II to support our Operations team. This is a hands on role supporting advanced electro mechanical product assembly in a fast paced production environment Electronic Assembler II This is not a remote position. Responsibilities • Solder electronic components including SMT and through hole, • Perform prototype assembly per drawings and specifications, • Support production assembly, testing, and inspection, • Perform board level programming and functional testing, • Maintain material inventory and documentation per ISO procedures, • Kit production projects, • Partner with Purchasing and Quality to ensure timely and accurate builds, • Coordinate with suppliers to validate workmanship and part conformance, • Provide soldering best practice guidance as needed, • Follow assembly and test procedures with precision Electronic Assembler II Qualifications • High School Diploma or equivalent, • 3 to 5 years of electronics manufacturing or assembly experience Electronic Assembler II • Strong soldering skills including SMT, through hole, and harnessing Electronic Assembler II • Experience with PCB assembly and testing, • Understanding of IPC A 610 or J STD 001 standards preferred Electronic Assembler II • Ability to read and follow assembly drawings and test procedures, • Strong documentation and communication skills, • Ability to manage multiple priorities and meet deadlinesWork Environment, • Fast paced production setting, • Team driven culture, • ISO regulated manufacturing environment, • Opportunity for growth and professional development If you have strong soldering skills and enjoy hands on electronic assembly work, we want to speak with you. PandoLogic. Keywords: Electronics Assembler, Location: Long Beach, CA - 90848 , PL: 603514084

Job DescriptionYoh is hiring a Medical Device Assembler for our Santa Fe Springs, CA client. In this role you will be responsible for packaging, assembling parts/components, seal and operate machines in a cleanroom environment. Job Functions • Able to package, assemble parts/components, seal and operate machines under direct supervision or with qualified knowledgeable cleanroom associate, • Performs packaging duties manually and into product cartons, • Follows standard operating procedures and manuals related to material safety sheets, safety, packaging, cleaning, assembly, and disassembly of machinery, • Follows written instructions to complete tasks for beginning of packaging, completing a batch, work orders, in process testing, batch records, and related Standard Operating Procedures, • Performs simple mathematical calculations required to assist in completion of packaging batch, • Meets project deadlines and performance standards, • Performs routine cleaning of packaging equipment/facility, • Complies with all Company policies and procedures, including safety rules and regulationsSkills, Experience & Education Required, • Education and experience commensurate with job responsibilities., • The employee shall be capable of reading and interpreting drawings and maintaining accurate records., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • The associate must be able to understand and interpret written instructions., • Ability to read, analyze, and interpret written instructions and procedures, • Ability to effectively present information and respond to questions from supervisors and managers, • Ability to accurately manage counts, • Ability to perform simple math including addition, subtraction, multiplication, division, and percentages, • Ability to interpret a variety of instructions furnished in written, oral or diagram form#IND-SPG Estimated Min Rate: $17.00 Estimated Max Rate: $18.50 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs, • Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit https://www.yoh.com/applicants-with-disabilities to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: https://www.yoh.com/privacy-notice Company DescriptionYoh delivers expertise, methodology, and momentum to keep work moving forward. From strategy to execution, we deliver bold ideas and big results through consulting, staffing, and enterprise solutions. Nearly a century after our founding, Yoh remains STEM-centered, collaborative, and committed to client success. Yoh is a proud member of the Day & Zimmermann family of companies. Visit us at https://www.yoh.com/Yoh delivers expertise, methodology, and momentum to keep work moving forward. From strategy to execution, we deliver bold ideas and big results through consulting, staffing, and enterprise solutions. Nearly a century after our founding, Yoh remains STEM-centered, collaborative, and committed to client success. Yoh is a proud member of the Day & Zimmermann family of companies. Visit us at https://www.yoh.com/

Job Description ASSEMBLER - 1st Shift START ASAP Required Skills • 2+ years of assembly experience with coils, PCBs, or other small electronic parts., • Soldering preferred, • Ability to use rulers, calipers, and other measuring tools. Responsibilities • Apply first tape to wound coils (by hand using hand tools), • Attach Lead Wires to Coils (by hand), • Solder Lead Wires (dip soldering), • Tape Down Lead Wires and Apply Final tape to coils (by hand in fixtures), • Apply Final Tape (run tape application machine), • Assembly of Coils into housings, epoxy and glue (by hand with tools and fixtures), • Test Coils (following test instructions), • Corrective lenses may be required for close up work. Some work is done under magnification. Company DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

Job Description Company Overview Neill Aircraft Company is a family owned and operated business based in Long Beach, California since 1956. Specializing in "Build-to-Print" services, we work with materials Aluminum, Titanium, Inconel, and Stainless-Steel. With over 250 employees, we prioritize customer satisfaction by continually enhancing our operations. Join us for an exciting journey in aerospace manufacturing! Position Summary Neill Aircraft Company is seeking a detail-oriented Assembler to join our aerospace manufacturing team. This position is responsible for assembling precision aerospace components by following engineering drawings, work instructions, and quality standards. The ideal candidate has a strong mechanical aptitude, enjoys hands-on-work, and is committed to producing high-quality products in a fast-paced manufacturing environment. Essential Duties & Responsibilities • Assemble aerospace components by following work instructions, blueprints, and engineering specifications., • Drill, trim, fasten, bond, seal, and install components using hand tools, power tools, and assembly equipment., • Position, align, and fit parts using measuring tools, jigs, fixtures, and shop aids to ensure quality and accuracy., • Set up and operate assembly equipment while following established manufacturing procedures., • Verify that the correct materials, parts, and previous operations have been completed before beginning work., • Read and interpret blueprints, work instructions, and other manufacturing documentation., • Record labor and production activity using the company's manufacturing system., • Follow all quality standards, FOD prevention practices, and workplace safety procedures., • Assist with moving materials, basic equipment maintenance, and maintaining a clean, organized work area., • Work efficiently in a fast-paced manufacturing environment while meeting quality and productivity expectations. Qualifications • High school diploma or equivalent preferred., • Previous aerospace, sheet metal, manufacturing, or mechanical assembly experience preferred., • Have prior experience with AS9100 standards or equivalent preferred., • Ability to read basic blueprints and work order instructions., • Experience using hand, power, and measuring tools., • Strong attention to detail and commitment to producing quality work., • Ability to work independently and as part of a team., • Basic computer skills. Physical Requirements This position requires the ability to stand and walk for extended periods, frequently use hands and arms to handle tools and materials, and perform repetitive assembly tasks with precision. Employees must be able to lift and carry up to 25 pounds occasionally and up to 10 pounds regularly. The role also requires close visual attention, depth perception, and the ability to work safely around manufacturing equipment in a fast-paced production environment. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the position. Why Join Neill Aircraft Company? • Stable aerospace manufacturing company serving the industry since 1956., • Growth opportunities and skill development., • Comprehensive benefits package (medical, dental, vision, company-paid basic life insurance, and other supplemental coverages)., • Team-oriented work environment focused on quality and continuous improvement. Apply Today! If you're looking for an opportunity to build your career in aerospace manufacturing and enjoy working with your hands, we'd love to meet you! Neill Aircraft Company is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by applicable federal, state, or local law. We are dedicated to fostering a workplace built on respect, fairness, inclusion, and equal opportunity for all. Neill Aircraft Company also provides reasonable accommodations to qualified individuals with disabilities throughout the application and employment process. Applicants who require an accommodation should contact Human Resources. Monday - Friday 5:30AM - 2:00PM 40 hours per week

Job Description Job summary: Manual soldering to assemble, test, and create wire harnessing for aerospace/simulation products in a fast-paced production environment. Job duties: Assemble electronic equipment, install components, units, sub-assemblies, & wiring. • Assemble units with process that may include but not limited to: soldering, stripping wires, crimping pins, heat shrinking of tubing, labels., • Read and interpret drawings, Schematics, specifications, work orders or reports., • Test products to ensure conformance to specification., • Perform manual assembly during the small-scale production of electronic devices used in simulated avionic systems. REQUIREMENTS · Demonstrate good soldering skills. · Recent PC Board soldering experience. · Able to read work instructions and assembly drawings. · Ability to fully wire units using schematics and wiring diagrams with little to no supervision · Knowledge of operating crimping tools, ohmmeter, power supplies, and oscilloscopes · Electronic Engineering Tech degree preferred PHYSICAL DEMANDS · Able to sit for a long period of time. · Must be able to lift, carry, stand, walk, reach, pull up to 20 pounds. BENEFITS · 401(k) · Health insurance, dental, and vision · Paid time off, sick leave, extra days at Thanksgiving, Federal Holidays Company DescriptionSimulator Product Solutions LLC is part of the Electronics Group of Orbit International Corp. We custom design and build instruments, panels, and multi-function displays for simulator use for the US and friendly militaries around the world as well as prime contractors and commercial aerospace companies.Simulator Product Solutions LLC is part of the Electronics Group of Orbit International Corp. We custom design and build instruments, panels, and multi-function displays for simulator use for the US and friendly militaries around the world as well as prime contractors and commercial aerospace companies.

Job DescriptionManufacturing company is looking for assemblers. Must be able to read and follow written instructions. Assemble using hand tools and having great attention to detail. Montebello, Ca. Monday - Friday 4am - 1pm with overtime as needed and possibility of working on Saturdays. Temp to Hire $20 an hour If you are interested and meet the requirements, please apply and we will review your resume for consideration. Thank you! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Job Title: PC Assembler If you are interested contact Andrey C at (562 566 4693)Book a meeting at https://talentassistant.aerotek.com/assistant/bookings/wxS4Q2yc Job Description We are looking for a dedicated and detail-oriented PC Assembler to join our team. The ideal candidate will be responsible for assembling, troubleshooting, and setting up computers, as well as processing data and reporting on hardware and software issues. This role requires a keen eye for detail, the ability to work with blueprints, and the capability to work with various computer components and systems. Responsibilities • Perform assembly and testing of single-board computers, embedded PCs, panel PCs, industrial chassis, and workstations., • Assemble and test industrial PCs and control systems used in industrial automation applications., • Work with quality assurance personnel to ensure proper and efficient integration of industrial PC components., • Collaborate with production support technicians to resolve issues related to the proper operation of equipment under test., • Examine parts and accessories for conformance with specifications and alert quality assurance personnel when necessary., • Maintain tools and equipment and keep the assigned work area organized., • Adhere to the quality management system., • Identify various computer parts and understand their applications., • Carefully assemble all components according to working guidelines., • Install various types of software based on customer requirements., • Perform tests to ensure all components and software are fully functional. Essential Skills • Experience in production and general labor., • Proficiency in assembly and assembly line work., • Skills in compounding and packaging., • General production knowledge., • Ability to work with hand tools., • Experience in cleanroom operations., • Skills in packing, inspection, and quality checks., • Computer assembly capabilities., • Ability to perform heavy lifting., • Experience in electrical assembly. Additional Skills & Qualifications • Ability to follow detailed instructions and guidelines., • Strong troubleshooting skills., • Capacity to work collaboratively with a team. Why Work Here? Join a team that values precision and quality, offering opportunities for professional growth and development. Benefit from a supportive work environment that encourages collaboration and innovation. Work Environment Work in a cleanroom environment with a focus on quality and efficiency. Collaborate with a team dedicated to excellence in industrial PC assembly. Job Type & Location This is a Contract to Hire position based out of City of Industry, CA. Pay and Benefits The pay range for this position is $18.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in City of Industry,CA. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Summary: The Electrical Mold Assembler is responsible for assembling, fitting, soldering, and preparing molds, fixtures, and electrical components used in the manufacturing of electrical transmission towers and related products. This position ensures parts are assembled accurately according to engineering drawings, production specifications, and quality standards. 2nd shift available 1pm to 9:30pm Monday to Friday, overtime available when needed Essential Duties and Responsibilities: • Assemble molds, fixtures, templates, and electrical components according to blueprints and work instructions., • Perform soldering of wires, terminals, connectors, and other electrical components as required., • Read and interpret engineering drawings, specifications, and production orders., • Measure and verify dimensions to ensure proper fit and alignment., • Use hand tools, power tools, soldering equipment, and measuring instruments safely and effectively., • Inspect assembled and soldered components for quality, accuracy, and functionality., • Identify and report defective materials, equipment issues, or discrepancies., • Assist with mold maintenance, repairs, and modifications as required., • Maintain a clean and organized work area., • Follow all company safety procedures and wear required PPE., • Perform other duties as assigned. Qualifications: • Previous assembly, soldering, or manufacturing experience preferred., • Ability to read blueprints and technical drawings., • Experience using soldering irons and related equipment., • Basic knowledge of hand tools, power tools, and measuring devices., • Strong attention to detail and quality., • Ability to work independently and as part of a team. Physical Requirements: • Ability to stand, walk, bend, and lift up to 50 pounds throughout the shift., • Ability to perform repetitive tasks using hands and arms., • Ability to work in a manufacturing environment with exposure to noise, dust, heat, and varying temperatures. Work Environment: Manufacturing facility producing electrical transmission tower components and related products. Frequent use of hand tools, soldering equipment, measuring devices, and assembly fixtures in a fast-paced production environment.

Job Description Career Opportunity – Aerospace Mechanical Assembler - Acromil LLC – City of Industry Our Company Using state-of-the-art technology, Acromil, LLC in Corona, CA has been a primary supplier to the Commercial and Defense Aerospace Industries of complex structural components and assemblies since 1959. Acromil pursues its vision of excellence by providing the highest quality products, on time and at competitive prices within a culture of integrity and pride. This vision led us to the acquisition of a similar business operation located in Corona, CA in September 2018 for a total footprint of 200,000 square feet. Acromil’s increased capacity will further our goal of being a World Class Supplier. Our Opportunity The selected individual will produce aerospace components by assembling parts and sub – assemblies. The essential duties will include the following. • Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, sub-assemblies, tools, and materials, • Positions parts and sub-assemblies by using templates or reading measurements, • Assembles components by examining connections for correct fit; fastening parts and sub-assemblies, • Drilling, riveting, c-sink components in preparation for final assembly operation, • Sub-assembly, fit checking, dis-assembly, deburring and cleaning of components, • Installation of bushings and other parts, using mechanical press and bushing installation tools, • Identification of parts per customer requirements, • Working with various sealants, cleaning compounds, primers and paints, • Verifies specifications by measuring completed component with precision measuring tools, • Keeps equipment operational by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs, • Maintains safe and clean working environment by complying with procedures, rules, and regulations through FOD prevention techniques and lean manufacturing, • Maintains supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies, • Conserves resources by using equipment and supplies as needed to accomplish job results, • Documents actions by completing production and quality forms, • Contributes to team effort by accomplishing related results as needed Job Requirements Qualified individuals will have at least a GED and 5 years’ experience in the above job responsibilities. Experience in reading Aerospace Assembly drawing/CAD-software. Ability to work with minimum supervision. Must be able to stand for 8 hours in a day/night, lift/carry up to 50 pounds, keen eye-hand coordination, able to be trained and certified as a Forklift & Crane Operator. Person must be an United States (US) Person as defined by ITAR Regulations – A United States (US) Person is a citizen of the United States, a lawful permanent resident alien of the US, (a "Green Card" holder), a refugee or someone in the USA as a protected political asylee or under amnesty. Benefits We offer Medical, Dental, Vision, Life Insurance and a 401(k) plan with Employer’s match, safety incentives and an employee referral bonus program. We also provide paid holidays, vacation and sick days. We are proud to be an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

Job Description Assembler Client: Confidential Aerospace / Precision Manufacturing Company Location: North Hollywood CA Department: Assembly / Manufacturing Position Type: Temp-to-Hire Shift: 2nd Shift Pay Rate: 23.00 Position Summary A confidential aerospace and precision manufacturing client is seeking an experienced Assembler to build complex assemblies according to blueprint, work order, and customer specification requirements. This is an advanced-level assembly position requiring a high degree of accuracy, strong mechanical aptitude, and the ability to work independently with little to no supervision. The Assembly Mechanic III will be responsible for performing complex assembly work, conducting advanced inspections, troubleshooting assembly issues, and ensuring completed assemblies meet customer and quality requirements. This role also supports training and mentoring of lower-level assembly mechanics and may assist with developing or improving assembly processes. Key Responsibilities • Build complex mechanical assemblies according to blueprints, work instructions, job travelers, and customer specifications., • Perform assembly work independently with minimal or no supervision., • Use hand tools, power tools, clamps, rivet guns, countersinks, drills, fixtures, and other assembly equipment., • Perform advanced inspection checks to verify component alignment, clearance, cleanliness, fit, fastening, and overall workmanship., • Use inspection tools such as scales, micrometers, calipers, feeler gauges, and other measuring devices to confirm assembly requirements., • Troubleshoot assembly issues and make adjustments as needed to meet quality and customer specifications., • Read, interpret, and apply blueprint requirements, shop math, customer specifications, and production documentation., • Research and interpret customer requirements as needed to support assembly accuracy and compliance., • Maintain a clean, organized, and safe work area throughout the shift., • Assist with training, mentoring, and supporting Level I and Level II assembly mechanics., • Provide technical support to team members when assembly or inspection questions arise., • Assist with the development, improvement, or validation of new assembly processes., • Report quality concerns, tooling issues, material problems, or process gaps to the appropriate supervisor., • Follow all safety procedures, PPE requirements, quality standards, and company policies., • Support additional assembly, inspection, or production duties as assigned. Required Qualifications • 3–5 years of assembly experience in aerospace, precision manufacturing, mechanical assembly, or a related environment., • Ability to build and troubleshoot assemblies of varying complexity., • Strong blueprint reading and print interpretation skills., • Strong understanding of basic shop math., • Experience using hand tools and assembly tools such as clamps, rivet guns, countersinks, drills, and fixtures., • Experience using inspection tools such as scales, micrometers, calipers, and feeler gauges., • Ability to perform advanced inspection checks for alignment, clearance, cleanliness, fit, fastening, and conformance., • Ability to interpret customer specifications and production requirements., • Ability to work independently with minimal supervision., • Strong attention to detail and commitment to quality., • Ability to train, mentor, and assist lower-level assembly mechanics., • Reliable attendance and strong work ethic., • Ability to follow safety procedures and wear required PPE. Preferred Qualifications • Aerospace assembly experience., • Experience assembling complex mechanical components or precision assemblies., • Experience with riveting, drilling, countersinking, fastening, fitting, alignment, or fixture-based assembly., • Experience working in an AS9100, FAA-regulated, or quality-controlled manufacturing environment., • Experience supporting process improvements or new assembly process development., • Experience reviewing customer specifications or technical documentation. Physical Requirements • Ability to lift up to 35 lbs., • Ability to carry up to 35 lbs for short distances, approximately up to 20 feet., • Ability to load parts into fixtures weighing up to 35 lbs., • Ability to stand, walk, bend, reach, grip, and perform repetitive hand and arm movements throughout the shift., • Ability to use hand tools, power tools, fixtures, and inspection tools for extended periods., • Good hand-eye coordination and manual dexterity., • Ability to work in a manufacturing environment with machinery, tools, noise, and production activity., • Ability to wear required PPE, which may include safety glasses, gloves, hearing protection, steel-toe shoes, or other protective equipment. Ideal Candidate Profile The ideal candidate is a highly skilled assembler who can work independently, read prints confidently, troubleshoot complex assemblies, and produce high-quality work without constant supervision. This person should be comfortable using assembly and inspection tools, identifying issues before they become defects, and helping train less-experienced mechanics. The strongest candidates will have aerospace or precision manufacturing experience and a strong understanding of quality, customer specifications, and advanced assembly requirements.

Job Description Small Parts Assembler (1st Shift) - TalentZök OVERVIEW Are you looking for a new career opportunity with an exciting company?! Then we've got the right team for you! In this role, you're responsible for the duties listed below. Immediate opening for a Small Parts Assembler (1st Shift) in Vernon, CA who possesses: • Small part mechanical assembly experience, • Good math skills, matching skills, and color matching ability, • Ability to use hand tools such as wrenches, screwdrivers, and pneumatic tools, • Ability to read drawings FULL DESCRIPTION: We are seeking a Small Parts Assembler to support first shift mechanical assembly in a manufacturing environment. This role is responsible for assembling component parts on small valves, matching parts to bills of materials, using hand and pneumatic tools, and following drawings and work instructions. The ideal candidate will have strong attention to detail, basic math skills, mechanical dexterity, and the ability to work accurately with small parts and components. The selected candidate will be responsible for: • Assembling component parts on small valves, • Matching parts and materials to bills of materials, • Reading and following drawings, work instructions, and assembly requirements, • Using hand tools such as wrenches and screwdrivers, • Using pneumatic tools as needed for assembly tasks, • Identifying and matching parts, colors, and components accurately, • Performing small part mechanical assembly with attention to detail, • Maintaining quality and accuracy throughout the assembly process, • Keeping the work area clean, organized, and safe, • Following all workplace safety procedures and production requirements, • Performing other duties as assigned The selected candidate will also possess: • High school diploma or GED required, • Ability to read and write English, • Small part mechanical assembly experience preferred, • Good math skills required, • Ability to pass a pre-employment math test, • Ability to read drawings and follow assembly instructions, • Ability to match parts to bills of materials accurately, • Ability to use screwdrivers, wrenches, pneumatic tools, and related hand tools, • Familiarity with pneumatic hand tools preferred, • Strong attention to detail and quality, • Ability to work in a manufacturing environment, • Reliable attendance and willingness to learn Physical Requirements: • Ability to sit, stand, walk, bend, reach, and move throughout the workday, • Ability to use hands and fingers for small part assembly, matching, handling, and tool use, • Ability to perform repetitive hand and wrist movements throughout the shift, • Ability to use screwdrivers, wrenches, pneumatic tools, and other hand tools safely and accurately, • Ability to visually inspect, match, and assemble small parts and components, • Ability to read drawings, bills of materials, and work instructions as needed, • Ability to occasionally lift, carry, or move standard production materials, components, or tools as needed, • Ability to work in a manufacturing environment while following applicable safety procedures Salary Range: $20/hour More information can be found at www.talentzok.com. Company DescriptionTalentZok was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2025, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, Simply Biotech is expanding to new markets and hiring additional staff in existing offices.TalentZok was founded in 2008 and has been repeatedly recognized as one of San Diego County's fastest growing businesses. In 2025, we were named Business Journal's 'Best Places to Work'. Even as our competitors are scaling back and laying off staff, Simply Biotech is expanding to new markets and hiring additional staff in existing offices.

Job DescriptionJob Title: Cable Harness Assembler Job Description This role involves performing bench-level mechanical and electrical assembly work to build and install cable and wire harnesses. You will use a variety of hand tools and powered tools to assemble, route, secure, and inspect harnesses in accordance with engineering documentation and IPC/WHMA-A-620 standards, ensuring safe, reliable, and high-quality electrical connections. Responsibilities • Perform bench-type mechanical and electrical assembly operations to build cable and wire harnesses and sub-assemblies., • Cut wires to specified lengths using appropriate tools and follow documented procedures., • Perform wire twisting operations to prepare conductors for subsequent assembly steps., • Carry out crimping operations using hand and electric tooling to attach terminals, contacts, and connectors., • Perform soldering operations on wires, terminals, and connections in accordance with established procedures., • Execute splicing operations to join conductors and ensure secure and reliable connections., • Insert wires, contacts, and components into connectors and housings as specified in engineering documentation., • Conduct in-process inspections at each stage of assembly to verify conformance to specifications and quality standards., • Build wire harnesses in full compliance with IPC/WHMA-A-620 standards., • Route and secure wire harnesses within vehicle assemblies according to engineering drawings and documentation., • Conduct electrical continuity tests and inspections to identify any faults, discontinuities, or defects., • Troubleshoot and resolve issues found during continuity testing and inspection, ensuring final assemblies meet all requirements., • Use hand tools and electric tooling safely and correctly, following all work instructions and procedures., • Maintain an organized workbench and ensure components, tools, and materials are handled and stored properly.Essential Skills, • Proven ability to assemble wiring harnesses in compliance with IPC/WHMA-A-620 standards., • Hands-on experience performing wire cutting, twisting, crimping, soldering, splicing, and inserting operations., • Demonstrated capability to route and secure wire harnesses within vehicle assemblies using engineering documentation., • Experience conducting electrical continuity tests and inspections to identify and resolve issues., • Proficiency using hand tools and electric tooling for mechanical and electrical assembly work., • Strong attention to detail and accuracy in following procedures, drawings, and standards., • Ability to perform in-process inspections and verify conformance to quality and technical requirements.Additional Skills & Qualifications, • Familiarity with IPC/WHMA-A-620 standards and their practical application in harness assembly., • Experience working with vehicle or similar complex assemblies that require precise harness routing., • Comfort reading and interpreting engineering documentation, work instructions, and diagrams., • Strong problem-solving skills for diagnosing and correcting issues found during continuity testing., • Commitment to quality and consistency in repetitive, process-driven assembly tasks.Why Work Here? You will join a production environment where quality, safety, and craftsmanship are highly valued. The role offers the opportunity to develop and refine specialized harness assembly skills while working with established industry standards such as IPC/WHMA-A-620. You will contribute directly to reliable, real-world applications and gain experience in a structured, process-oriented setting that supports skill growth and professional development. Work Environment This position is based in a hands-on production and bench assembly environment, working primarily with mechanical and electrical components, hand tools, and electric tooling. Standard hours are 7:00 a.m. to 3:30 p.m., providing a consistent daytime schedule. Work involves standing or sitting at a bench for extended periods, handling wires, connectors, and small components, and performing detailed tasks that require focus, precision, and adherence to safety and quality procedures. Job Type & Location This is a Contract to Hire position based out of Van Nuys, CA. Pay and Benefits The pay range for this position is $22.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Van Nuys,CA. Application Deadline This position is anticipated to close on Jul 16, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Volt is immediately hiring for an Assembler for a company located in Anaheim, CA. As an Assembler you will: Job Description • Day to Day Responsibilities, • Safely use and operate various tools including power tools, hoists, and production equipment, • Accurately complete paperwork required for production records., • Ability to read, understand, and follow established processes and instructions., • Perform duties assigned by Supervisor and/or Group Leader., • Use air/power/vibrating tools and do strong, pincher gripping., • Work safely around moving equipment, power tools, and industrial vehicles, • Assembly components onto custom vehicles and to perform inspections This is a full time opportunity Monday - Friday + weekends as needed The ideal candidate will have: • Required Skills & Qualifications, • Follow all safety rules and regulations strictly and maintain a clean and orderly work area., • Maintain a consistent pace throughout the shift with focus on quality (i.e., within applicable quality standards)., • Participate in continuous improvement process., • Work overtime as required and mandated by production schedules., • Maintain regular, reliable attendance., • Other duties as assigned Physical Requirements:, • Ability to lift up to 40 lbs and push/pull up to 100 lbs., • Ability to bend, twist, turn, kneel, and squat., • Stand and walk for the duration of assigned shift and reach overhead continuously., • Repetitive use of upper extremities. It may be necessary to perform any of these functions up to twelve hours a day., • Preferred Skills & Qualifications, • Basic knowledge of computers., • Basic knowledge of power, air, torque, and manual tools, • Understanding of Mechanical and assembly concepts, • Prior assembly experience preferred Schedule: 6:00 AM to 2:30 PM Overtime schedule: 5:00AM to 3:00PM Days: Monday through Friday and occasionally overtime on Saturday Pay Rate: $18.00 - $20.00 per hour *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email hr_dept@volt.com or call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Innova Solutions and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at volt-information-sciences-privacy-policy.pdf Pandologic. Keywords: Assembler, Location: Anaheim, CA - 92816 , PL: 603776659

Job Description Assembler performs final assembly of pH and ORP sensors, including the soldering of cable to pH sensors, soldering and installing connectors, and encapsulating connections with epoxies and silicones. Performs related functions as needed. Tasks 1. Read and interpret manufacturing procedures, work instructions and prints., 2. Cut and strip cables using both hand tools and cut & strip machines., 3. Prepare labels with a heat shrink labeling machine and shrink onto cables., 4. Prepare cables for connection to sensors by tinning wires with a soldering iron., 5. Prepare cable ends with the installation of a BNC connector using the pneumatic crimp machine., 6. Install pin tips and various other connectors with the use of a hand crimper. Complementary tasks: 1. Mix 2-part epoxies using a scale in preparation for encapsulation., 2. Pot cables into the backseal of the sensor using epoxy dispensing equipment. Knowledge, Skills, and Abilities: • Knowledge of pH sensor equipment and assembly and testing procedures., • Knowledge of safe production assembly practices., • Knowledge of soldering and de-soldering techniques., • Set up and use multimeter, picoammeter and measurement tools.

Job Description Our team is seeking motivated individuals looking to grow in a fast-paced, precision-driven Aerospace manufacturing company. This is a great opportunity to gain hands-on experience in aerospace manufacturing, with training, advancement opportunities, and consistent full-time hours. Location: Anaheim, CA Pay: $17–$19/hr (DOE) Schedule: Full-Time | Monday–Friday 8:00am - 4:30pm | Overtime and weekends as needed What You'll Do: • Cut and assemble tubes, • Maintain a clean and organized workspace What We’re Looking For: • Assembly or Manufacturing experience, • Basic math knowledge, • Dependable, strong work ethic, reliable and responsible Join a thriving aerospace manufacturing company in Anaheim, CA and start building a stable, long-term career!

Job Description Our growing company is hiring an Production Assembler I in the Architectural Hardware Industry. To join our growing team, please review the list of responsibilities and qualifications. We look forward to reviewing your resume. The Production Assembler I is responsible for basic assembly work to assemble components as needed to customer orders and demands. The Production Assembler I will be responsible for the following: • Ability to use light powered electrical or mechanical tools for assembly, • To complete daily production tasks as in numbers of orders/units completed in a single working cell or processing line based on demands, • To read and follow company documents - safety rules, operating instructions, policies and procedures, • To perform additional duties as designed (i.e. 5S events, lean manufacturing, etc.) The Preferred Candidate will have the following Skills & Abilities • Understanding of raw materials, WIP, finish goods, production processes, quality control, costs, and other techniques used in manufacturing, • Microsoft Office Suite (Excel, and Word), • High School Diploma/GED or above, • Effective time management skills, ability to prioritize and complete tasks efficiently, • Ability to multitask, stay organized and attentive to details, • Good communication skills Physical Job Requirements • This position requires the ability to remain in a stationary (standing and/or seated) position more than half the time, • This position requires the ability to view computer monitors less than half the time, • The person in this position must be able to maneuver (lift, move, carry, slide, etc.) up to 50 lbs What we offer: • Opportunity to work with a privately held manufacturing company with exception core values, • Competitive pay with a structured bonus program, • Great benefit options (Medical, 401(k), Paid Time Off and Holiday Pay, • Career growth and development opportunities Company DescriptionLocks and Architectural hardware manufacturerLocks and Architectural hardware manufacturer

Job DescriptionENTRY LEVEL AEROSPACE ASSEMBLER - 1ST AND 2ND SHIFT - $18/HOUR Job Description This role performs repetitive assembly operations to mass-produce commercial aircraft interior components, with a focus on premium class furniture and related structures. You work within the time constraints of the master production schedule, consistently meeting quality and delivery requirements set by customers while following detailed engineering documentation and established installation procedures. Responsibilities • Perform repetitive assembly operations to mass-produce commercial aircraft interior components, including premium class furniture and related interior structures., • Work within the time constraints of the master production schedule to meet customer requirements for quality and on-time delivery., • Read and interpret detailed blueprints and engineering drawings to understand specifications, dimensions, and assembly sequences., • Follow established installation procedures to ensure consistent and compliant assembly of components., • Mix and apply adhesives according to manufacturer specifications, ensuring proper coverage, curing, and bond strength., • Apply silicone sealant in accordance with requirements to achieve proper sealing and finish quality., • Place parts in the specified relationship to each other, ensuring correct alignment, orientation, and fit., • Verify unit dimensions and tolerances before installing inserts, rivets, blind nuts, blocks, angles, doublers, and fittings., • Bond, screw, rivet, or otherwise attach parts together using appropriate fasteners, adhesives, and tools., • Drill, countersink, and rivet metal or sheet metal parts as required by drawings and work instructions., • Install attachment fittings and related hardware as assigned, ensuring secure and accurate installation., • Prepare and organize tools, parts, and materials for use in the manufacturing area to support efficient workflow., • Requisition parts from the stockroom as needed, ensuring the correct components are available for each job., • Ensure work orders and traceability books are accurately maintained and completed throughout the manufacturing cycle., • Maintain safe and effective use of all machine and hand tools, following safety guidelines and best practices., • Report any defects, nonconformances, or issues to quality assurance and manufacturing engineers for review and resolution., • Promote cooperation and positive communication with co-workers to support a collaborative and productive team environment., • Pick up and remove scrap and waste materials from work areas to maintain a clean and organized workspace., • Clean work areas, machines, tools, and equipment regularly to support safety, quality, and efficiency., • Lift and move materials and components up to 40 pounds as needed to complete assembly tasks. Essential Skills • At least 1 year of assembly experience in a manufacturing or production environment., • Ability to read and interpret detailed blueprints and engineering drawings., • Experience following installation procedures and standardized work instructions., • Proficiency using hand tools and power tools in an assembly or mechanical setting. Additional Skills & Qualifications • Experience in a production environment manufacturing aircraft interiors or other precision assemblies., • Familiarity with commercial aircraft interior components such as galleys, closets, lavatories, floor panels, class dividers, and sidewalls., • Comfort working in a large-scale manufacturing setting with defined production schedules., • Attention to detail and a focus on quality, particularly in dimension verification and proper installation of hardware., • Reliability in following established procedures, documentation, and traceability requirements., • Willingness to support continuous improvement in safety, quality, and productivity. Why Work Here? This opportunity offers a contract-to-hire path, providing the chance to demonstrate your skills and transition into a long-term role with a stable manufacturing organization. You gain access to an on-site company gym, supporting your health and well-being while you work. You join a professional environment focused on quality, safety, and teamwork, where your craftsmanship directly contributes to high-profile commercial aircraft interiors and where consistent performance is recognized and valued. Work Environment You work in a very large, clean manufacturing environment dedicated to producing interior products for commercial aircraft, including galleys, closets, lavatories, floor panels, class dividers, and sidewalls. The setting emphasizes organization, cleanliness, and adherence to safety standards. You regularly use hand tools and power tools to assemble metal and composite components, following structured production schedules. The facility supports a production-focused atmosphere where teams collaborate on precision assemblies in a well-maintained shop environment, with access to an on-site company gym to support a healthy lifestyle. Job Type & Location This is a Contract to Hire position based out of Seal Beach, CA. Pay and Benefits The pay range for this position is $17.50 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Seal Beach,CA. Application Deadline This position is anticipated to close on Jul 24, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Production Assembler Location: Anaheim, CA Pay Rate: $18 - $18.50 Hours: 5am - 1:30 pm, plus OT when required Overview: This position is responsible for the assembly of electrical sensors and also supporting the manufacturing process. Minimum Requirements: • Must have good eyesight and be comfortable sitting for 8 hours, • Manual dexterity and able to work with small parts, • Team player able to be cross-trained, • Able to read/understand basic drawings, • At least 1 year of manufacturing experience, preferably in an assembly role/positionTo Apply: Email your resume for consideration Job Duties: • Follow work instructions to complete the assembly of electrical sensors, • Solder leads, connectors, wires, and other small electronic components, • Operate light duty machines such as bobbin winders, label printers and marking operations, • Mix epoxy hardener in correct proportions, • Perform basic electrical tests including magnetic polarity, insulation, resistance and measuring sensor outputTo Apply: Email your resume for consideration. About Kimco: Kimco Staffing Services is a rapidly growing, award-winning staffing firm whose purpose is to add real value to our clients and candidates while "Changing lives, One Job at a Time." We have won Best Of Staffing Client and Talent satisfaction awards from Clearly Rated for the last 10 years. Only 2% of staffing companies nationwide receive this recognition! We support our teams, candidates, and clients with strong operational excellence and state-of-the-art industry software platforms.PandoLogic. Keywords: Production Worker, Location: Anaheim, CA - 92816 , PL: 603719596

Job Description ASE Certified Master Assembler Location: Torrance, CA 90502 Schedule: Monday – Friday | 5:00 AM – 1:30 PM Overtime: As Needed Pay Rate: $30.00 – $40.00/hour DOE Employment Type: Direct Hire Position Summary We are seeking experienced Assembly Technicians with strong mechanical aptitude, automotive assembly experience, and exceptional attention to detail to support high-end vehicle production and restoration projects in a precision manufacturing environment. This role is responsible for assembling, fitting, troubleshooting, and finishing automotive components while maintaining the highest standards of craftsmanship and quality. The ideal candidate will have hands-on automotive assembly experience, strong problem-solving skills, and a passion for precision workmanship in vehicle restoration, manufacturing, or dealership environments. Key Responsibilities • Assemble, fit, align, and install automotive components and systems, • Perform bumper-to-bumper vehicle assembly and mechanical installation work, • Diagnose and troubleshoot assembly and fitment issues, • Read and interpret:, • Assembly instructions, • Work orders, • Technical drawings, • Build specifications, • Utilize hand tools, power tools, torque tools, and precision measuring equipment, • Ensure all assemblies meet strict quality and cosmetic standards, • Collaborate with:, • Leads, • Supervisors, • Production teams, • Quality personnel, • Support continuous improvement and production efficiency initiatives, • Train and assist junior technicians as needed, • Maintain clean and organized workstations, • Follow all OSHA, PPE, and shop safety procedures Required Qualifications • Minimum 5 years of automotive assembly, restoration, dealership, or manufacturing experience, • Strong mechanical aptitude and troubleshooting skills, • Experience with:, • Vehicle assembly, • Mechanical installation, • Automotive systems, • Precision fitting and finishing, • Ability to work with hand tools, power tools, and specialty automotive tools, • Strong attention to detail and craftsmanship mindset, • Ability to work in a fast-paced production environment, • Strong communication and teamwork skills, • Positive attitude and reliability Preferred Qualifications • ASE Certification highly preferred, • Experience with:, • Automotive restoration, • Luxury or high-performance vehicles, • Manufacturing assembly, • Custom vehicle builds, • Familiarity with early Porsche models highly preferred, • Experience mentoring or training technicians Physical Requirements • Ability to stand for extended periods throughout shift, • Frequent bending, reaching, kneeling, and repetitive hand movements, • Ability to lift and maneuver automotive components and tools safely Work Environment This position operates in a clean, professional automotive manufacturing and assembly environment with exposure to: • Automotive tools and equipment, • Mechanical systems, • Moving components and production equipment, • Fast-paced production workflows Proper PPE and adherence to all shop safety procedures are required. Benefits • Competitive compensation based on experience, • Health insurance options, • 401(k) with company match, • Paid time off, • Life and AD&D insurance, • Short-term and long-term disability coverage, • Tool support for technicians, • Career growth and advancement opportunities, • Ongoing training and development Qualified candidates are encouraged to apply immediately for consideration.

Job DescriptionFor almost 30 years, SQA Services has been a premier leader in providing managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. We’re hiring for a 4-6 week month contract, full time, 5 days a week on first shift, Quality PCBA Inspector position in Long Beach, CA. If you have a passion for electronics and a keen eye for quality, this could be the perfect opportunity for you!Key Responsibilities • You will be conducting visual PCBA inspections and paperwork verification at our client's supplier(s), • Ensure PCBA products meet quality and specification standards, verifying proper component placement, solder joints, and other assembly specifications, • Inspect soldering, component orientation, and component placement for accuracy, as per design and IPC-A-610 standards, • Confirm shipping documentation is legible and accurate (part number, serial number, etc.), • Check documentation packages to industry standards and classify defects, • Interpret PCBA manufacturing drawings, circuit board layouts, and identify non-conformances, • Periodically verify accuracy and ensure productivity to meet production schedules, • Maintain equipment and keep the work area organized and compliant with safety regulationsRequired Qualifications, • Knowledge of PCBA assembly methods and processes, • Familiarity with IPC-A-610 standards, • Minimum 3 years of experience as a PCBA Inspector/Assembler in electronic manufacturing or related fields, • Ability to read PCB assembly schematics, and circuit diagrams, and identify electronic components, • Proficient in documenting Certificates of Conformance (COC), • Strong organizational, communication, and software adaptation skillsPreferred Qualifications, • Certified or previously certified in IPC-A-610, • Diploma or GED from an accredited high school or technical school; college degree in engineering, • Knowledge of electronic contract manufacturing and LEAN manufacturing practices, • 5 years of experience, with 2 years as a PCBA InspectorMileage reimbursement at the US gov't rate ($0.725 per mile driven). Untaxed.Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. #ZR We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFor almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. You will be supporting SQA's national inspection team in the field by performing quality inspection for Cable and Harnesses. You will be a quality representative for our client on behalf of SQA to support quality improvements. SQA Services is seeking an Electronic Source Inspector to perform on-site inspections at supplier facilities throughout Orange County, Los Angeles County, San Diego County, and potentially Ventura County. This is a part-time contract role (typically 1–3 days per week) with the flexibility to accept inspection assignments based on your availability.Key Responsibilities: • Perform first-article, in-process, and final inspections at one or more client suppliers in the area., • Ensure products meet quality and specification standards, • Verify safety wire orientation, correct turns, and pigtails as per specifications, • Confirm shipping documentation is legible and accurate (part number, serial number, etc.), • Check documentation packages to industry standards and classify defects, • Interpret manufacturing drawings and identify non-conformances, • Periodically verify accuracy and ensure productivity to meet production schedules, • Maintain equipment and keep the work area organizedRequired Qualifications:, • Minimum 3 years of experience as a Cable and Harness Inspector/Assembler in electronic manufacturing or related fields with knowledge of cable and harness assembly methods, • Diploma or GED from an accredited high school or technical school, • Knowledge of electronic contract manufacturing and LEAN manufacturing a plus, • Ability to read schematics, assembly drawings, and identify wiring components, • Proficient in documenting Certificates of Conformance (COC), • Strong organizational, communication, and software adaptation skills, • Must be fluent in English, • ITAR Compliance required with background checks as necessaryPreferred Qualifications:, • 5+ years of experience in quality inspection, with 2 years as a Cable and Harness Inspector, • Familiar with IPC-A-620 standards; IPC-A-620 certification a plus, • Degree in EngineeringYour actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status.This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. (*) To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFor more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors We’re hiring for a Quality Cable & Harness Inspector position in Los Angeles and Orange County area. If you have a passion for cable harnesses and a keen eye for quality, this could be the perfect opportunity for you! This is a flexible, full-time or part-time role, averaging 3- 5 days per week, on an as-needed basis. Where inspectors may accept or decline individual inspection requests.Key Responsibilities • Perform first-article, in-process, and final inspections at one or more client suppliers, • Ensure products meet quality and specification standards, • Verify safety wire orientation, correct turns, and pigtails as per specifications, • Confirm shipping documentation is legible and accurate (part number, serial number, etc.), • Check documentation packages to industry standards and classify defects, • Interpret manufacturing drawings and identifying non-conformances, • Periodically verify accuracy and ensure productivity to meet production schedules, • Maintain equipment and keep the work area organized Required Qualifications, • Knowledge of cable and harness assembly methods, • Familiar with IPC-A-620 standards, • Minimum 3 years of experience as a Cable and Harness Inspector/Assembler in electronic manufacturing or related fields, • Ability to read schematics, assembly drawings, and identify wiring components, • Proficient in documenting Certificates of Conformance (COC), • Strong organizational, communication, and software adaptation skills Preferred Qualifications, • Certified or previously certified in IPC-A-620, • Diploma or GED from an accredited high school or technical school; college degree in engineering, • Knowledge of electronic contract manufacturing and LEAN manufacturing, • Preferred: 5 years of experience, with 2 years as a Cable and Harness InspectorNote: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFor almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. What to expect: You will be part of a global inspection team assuring the quality of components and assemblies that this global aerospace leader is sourcing from one or more suppliers in this area. This is an ongoing full-time assignment representing the client’s quality interests at suppliers in the Southern California Region. Once on the team, you will be deployed through SQA’s operations center based on client needs and each supplier’s production schedule. Before deployment, you will undergo training, including a remote classroom session, Gage R&R training and testing, and three shadow inspections with an existing inspector on the team. The final day of training is a shadow inspection with the client. What You'll Do: • Perform first-article, in-process, and final cable wire harness inspections at our client's supplier(s) in the greater OC/LA area, • Verify that products meet quality requirements and specifications, • Verify safety wire has been applied in a negative pull orientation, the correct number of turns, and pigtails are tucked in according to specification requirements, • Verify shipping documentation is legible and includes correct identification (part number, serial number), configuration change letter, Purchase order line item/quantity/change letter, shipping destination, etc., • Verify documentation packages to industry/commodity-specific standards and classify defect types, • Read and interpret standard manufacturing drawings based on industry and commodity standards, • Identify and record non-conformances found at the inspection, • Checks work periodically and upon completion for accuracy, • Works productively and efficiently so the production schedules of the company are met, • Assures that all assembly equipment is properly maintained, and work area is neat and organizedWhat you’ll need:, • Knowledge of cable and harness assembly methods., • Knowledge of IPC-A-620 Standards. IPC-A-620 certification is a plus, • Minimum: Three (3) years of experience as a Cable and Harness Inspector/Assembler with increased responsibilities in an electronic contract manufacturing organization, electronic high tech, or related industry with equivalent experience, • Preferred: Five (5) years of experience as a Cable and Harness Inspector/Assembler with increased responsibilities and two (2) years' experience as a Cable and Harness Inspector in an electronic contract manufacturing organization, electronic high-tech, or related industry with equivalent experience, • Diploma or GED from an accredited high school or technical school, • College degree in engineering or other related area preferred, • Knowledge of electronic contract manufacturing best practices. LEAN manufacturing knowledge a plus, • Able to read electronic schematics and assembly drawings, • Able to document COC (Certificate of Conformance), • Able to identify electronic wiring and harnessing components, • Ability to use technology and adapt to new software, • Strong organizational skills along with excellent oral and written communication ability, • Able to speak, read, write, and understand English as it relates to performing job requirements, • Due to the nature of the products, US Citizenship is also a requirement, and background checks are requiredPortal to portal rate for any travel timeMileage reimbursement at US gov't rate. Untaxed.#ZR We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Hello, this is Veronica with Express Employment Professionals in North Hollywood. We are a full-service staffing agency. One of our clients in North Hollywood needs a Quality Assembler Inspector. Give us a call at 818-332-1622 so we can tell you more about the job position. Job Description: Duration: 6 months (potential for extension) Essential Responsibilities • Inspect and test assembled parts on an inspection line or at individual workstations under the direction of the Quality Supervisor., • Perform tasks that are more varied and complex than entry-level assembly, requiring broader product knowledge., • Conduct testing of products at sub-assembly or final assembly stages., • Perform repair or rework on assembled units or sub-assemblies as needed., • Maintain responsibility for quality, workmanship, and adherence to company production standards., • Perform simple equipment or process set-ups., • Recognize, document, and report problems, discrepancies, or failures in materials, tooling, machinery, and processes., • Conduct Root Cause Analysis on product defects and communicate findings clearly and concisely., • Demonstrate the ability to perform all duties of an entry-level inspector., • Apply the Four-Level Defect Grading System; proactively identify, report, and help resolve quality defects., • Work in compliance with all safety standards and maintain a clean, orderly work area., • Perform additional duties as assigned. Qualifications • High school diploma or general education degree (GED); or equivalent combination of education and experience., • 1–2 years of experience of assembly or testing inline manufacturing assemblies preferred., • Ability to perform inspection using calipers, micrometers, and related measuring tools., • Able to read and interpret safety rules, operating and maintenance instructions, procedure manuals, and follow written instructions in English, • Capable of performing basic math (addition, subtraction, multiplication, division), using measurements (weight, volume, distance), and reading simple sketches and shop drawings., • Ability to operate required equipment or tools. You should be proficient in: • GD&T, • Troubleshooting Skills, • Composite Materials & Repair, • Precision Measurement & Inspection, • Quality Control Data Analysis, • Blueprint Reading

Job DescriptionENTRY LEVEL AEROSPACE ASSEMBLER - 1ST AND 2ND SHIFT - $18/HOUR Job Description This role performs repetitive assembly operations to mass-produce commercial aircraft interior components, with a focus on premium class furniture and related structures. You work within the time constraints of the master production schedule, consistently meeting quality and delivery requirements set by customers while following detailed engineering documentation and established installation procedures. Responsibilities • Perform repetitive assembly operations to mass-produce commercial aircraft interior components, including premium class furniture and related interior structures., • Work within the time constraints of the master production schedule to meet customer requirements for quality and on-time delivery., • Read and interpret detailed blueprints and engineering drawings to understand specifications, dimensions, and assembly sequences., • Follow established installation procedures to ensure consistent and compliant assembly of components., • Mix and apply adhesives according to manufacturer specifications, ensuring proper coverage, curing, and bond strength., • Apply silicone sealant in accordance with requirements to achieve proper sealing and finish quality., • Place parts in the specified relationship to each other, ensuring correct alignment, orientation, and fit., • Verify unit dimensions and tolerances before installing inserts, rivets, blind nuts, blocks, angles, doublers, and fittings., • Bond, screw, rivet, or otherwise attach parts together using appropriate fasteners, adhesives, and tools., • Drill, countersink, and rivet metal or sheet metal parts as required by drawings and work instructions., • Install attachment fittings and related hardware as assigned, ensuring secure and accurate installation., • Prepare and organize tools, parts, and materials for use in the manufacturing area to support efficient workflow., • Requisition parts from the stockroom as needed, ensuring the correct components are available for each job., • Ensure work orders and traceability books are accurately maintained and completed throughout the manufacturing cycle., • Maintain safe and effective use of all machine and hand tools, following safety guidelines and best practices., • Report any defects, nonconformances, or issues to quality assurance and manufacturing engineers for review and resolution., • Promote cooperation and positive communication with co-workers to support a collaborative and productive team environment., • Pick up and remove scrap and waste materials from work areas to maintain a clean and organized workspace., • Clean work areas, machines, tools, and equipment regularly to support safety, quality, and efficiency., • Lift and move materials and components up to 40 pounds as needed to complete assembly tasks. Essential Skills • At least 1 year of assembly experience in a manufacturing or production environment., • Ability to read and interpret detailed blueprints and engineering drawings., • Experience following installation procedures and standardized work instructions., • Proficiency using hand tools and power tools in an assembly or mechanical setting. Additional Skills & Qualifications • Experience in a production environment manufacturing aircraft interiors or other precision assemblies., • Familiarity with commercial aircraft interior components such as galleys, closets, lavatories, floor panels, class dividers, and sidewalls., • Comfort working in a large-scale manufacturing setting with defined production schedules., • Attention to detail and a focus on quality, particularly in dimension verification and proper installation of hardware., • Reliability in following established procedures, documentation, and traceability requirements., • Willingness to support continuous improvement in safety, quality, and productivity. Why Work Here? This opportunity offers a contract-to-hire path, providing the chance to demonstrate your skills and transition into a long-term role with a stable manufacturing organization. You gain access to an on-site company gym, supporting your health and well-being while you work. You join a professional environment focused on quality, safety, and teamwork, where your craftsmanship directly contributes to high-profile commercial aircraft interiors and where consistent performance is recognized and valued. Work Environment You work in a very large, clean manufacturing environment dedicated to producing interior products for commercial aircraft, including galleys, closets, lavatories, floor panels, class dividers, and sidewalls. The setting emphasizes organization, cleanliness, and adherence to safety standards. You regularly use hand tools and power tools to assemble metal and composite components, following structured production schedules. The facility supports a production-focused atmosphere where teams collaborate on precision assemblies in a well-maintained shop environment, with access to an on-site company gym to support a healthy lifestyle. Job Type & Location This is a Contract to Hire position based out of Seal Beach, CA. Pay and Benefits The pay range for this position is $17.50 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Seal Beach,CA. Application Deadline This position is anticipated to close on Jul 25, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Hello, this is Veronica with Express Employment Professionals in North Hollywood. We are a full-service staffing agency. One of our clients in North Hollywood needs a Quality Assembler Inspector. Give us a call at 818-332-1622 so we can tell you more about the job position. Job Description: Duration: 6 months (potential for extension) Essential Responsibilities • Inspect and test assembled parts on an inspection line or at individual workstations under the direction of the Quality Supervisor., • Perform tasks that are more varied and complex than entry-level assembly, requiring broader product knowledge., • Conduct testing of products at sub-assembly or final assembly stages., • Perform repair or rework on assembled units or sub-assemblies as needed., • Maintain responsibility for quality, workmanship, and adherence to company production standards., • Perform simple equipment or process set-ups., • Recognize, document, and report problems, discrepancies, or failures in materials, tooling, machinery, and processes., • Conduct Root Cause Analysis on product defects and communicate findings clearly and concisely., • Demonstrate the ability to perform all duties of an entry-level inspector., • Apply the Four-Level Defect Grading System; proactively identify, report, and help resolve quality defects., • Work in compliance with all safety standards and maintain a clean, orderly work area., • Perform additional duties as assigned. Qualifications • High school diploma or general education degree (GED); or equivalent combination of education and experience., • 1–2 years of experience of assembly or testing inline manufacturing assemblies preferred., • Ability to perform inspection using calipers, micrometers, and related measuring tools., • Able to read and interpret safety rules, operating and maintenance instructions, procedure manuals, and follow written instructions in English, • Capable of performing basic math (addition, subtraction, multiplication, division), using measurements (weight, volume, distance), and reading simple sketches and shop drawings., • Ability to operate required equipment or tools. You should be proficient in: • GD&T, • Troubleshooting Skills, • Composite Materials & Repair, • Precision Measurement & Inspection, • Quality Control Data Analysis, • Blueprint Reading

Job DescriptionFor more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors We’re hiring for a Quality Cable & Harness Inspector position in Southern California. Primarily in the LA and OC areas. The schedule is on first shift, full-time, 4-5 days per week on an as-needed basis. If you have a passion for cable harnesses and a keen eye for quality, this could be the perfect opportunity for you!Key Responsibilities • Perform first-article, in-process, and final inspections at one or more client suppliers, • Ensure products meet quality and specification standards, • Verify safety wire orientation, correct turns, and pigtails as per specifications, • Confirm shipping documentation is legible and accurate (part number, serial number, etc.), • Check documentation packages to industry standards and classify defects, • Interpret manufacturing drawings and identifying non-conformances, • Periodically verify accuracy and ensure productivity to meet production schedules, • Maintain equipment and keep the work area organized Required Qualifications, • Knowledge of cable and harness assembly methods, • Familiar with IPC-A-620 standards, • Familiar with IPC-A-610 standards, • Minimum 3 years of experience as a Cable and Harness Inspector/Assembler in electronic manufacturing or related fields, • Ability to read schematics, assembly drawings, and identify wiring components, • Proficient in documenting Certificates of Conformance (COC), • Strong organizational, communication, and software adaptation skills Preferred Qualifications, • Certified or previously certified in IPC-A-620 or IPC-A-610, • Diploma or GED from an accredited high school or technical school; college degree in engineering, • Knowledge of electronic contract manufacturing and LEAN manufacturing, • Preferred: 5 years of experience, with 2 years as a Cable and Harness Inspector50% hourly rate for any travel time ("p2p")Mileage reimbursement at the US gov't rate ($0.72 per mile driven). Untaxed.Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Title: Fabricator/Assembler Location: Glendale, CA Job Type: Full-Time Shift: 7:30am-4:00pm Pay: $23-28/hr Company: SMP ENGINEERING, INC About Us:At SMP Engineering, Inc we’re driven by innovation and excellence. As a leader in the Aerospace/Defense Manufacturing sector, we specialize in delivering high-quality solutions to client(s) across the globe. We’re looking for talented hands-on, skilled and reliable Fabricator/Assembler to join our production team. Job Summary:As a Fabricator/Assembler, you will be responsible for reading blueprints and technical drawings, assembling components, and fabricating parts to meet quality and production standards. You’ll work with tools and machinery to help build high-quality products in a fast-paced manufacturing environment. Key Responsibilities: • Read and interpret blueprints, schematics, and work orders., • Measure, cut, and shape materials (metal, plastic, etc.) using hand and power tools., • Assemble components using mechanical fasteners, welding, or adhesives., • Inspect parts and finished assemblies for accuracy and quality., • Operate fabrication equipment such as saws, grinders, drills, and welders., • Follow safety protocols and maintain a clean work area., • Communicate effectively with supervisors and team members., • Document production and quality checks as required. Qualifications: • High school diploma or equivalent required., • 1+ year experience in fabrication, assembly, or a similar role preferred., • Ability to read blueprints and technical drawings., • Skilled in the use of hand tools, power tools, and fabrication equipment., • Basic math and measurement skills., • Strong attention to detail and quality., • Ability to lift 50lbs and stand for extended periods. Benefits: • Competitive pay., • Health, dental, and vision insurance., • Paid time off and holidays., • Ongoing training and advancement opportunities. How to Apply:Submit your resume to chan@smp-eng.com or apply online through Indeed. We are an equal opportunity employer and welcome applications from all qualified individuals.

Job Description Senior Mechanical Assembler WET (Design) – Burbank, CA At WET, we don’t just build systems—we engineer and manufacture complex, performance-driven environments that operate on a global stage. Our fountains and features, including the Fountains of Bellagio and the Dubai Fountain, integrate mechanical systems, controls, hydraulics, and show technology to deliver precision, reliability, and spectacle at scale. We are seeking a Senior Mechanical Assembler who brings deep technical experience, strong mechanical intuition, and pride in craftsmanship. This is a critical, hands-on role responsible for building complex assemblies that must perform flawlessly in the field—often under demanding, real-world conditions. Where You Fit In As a Senior Mechanical Assembler, you will be at the center of building WET’s core systems—translating engineering designs into fully realized mechanical assemblies. You will work across mechanical structures, plumbing systems, and electrical integrations, ensuring each build meets exacting standards for fit, function, and durability. This role is ideal for someone who has seen a wide range of assemblies, understands how systems come together holistically, and can independently drive work forward while supporting and elevating those around them. What You’ll Do Read and interpret complex engineering drawings, P&IDs, wiring diagrams, and assembly documentation Assemble integrated mechanical systems including structural components, pipe assemblies, valves, manifolds, and electromechanical elements Build and route wire harnesses and cable assemblies, ensuring proper termination, labeling, and protection Perform plumbing and pipe fitting (threaded, compression, and bonded connections), ensuring leak-free and field-ready systems Install and align pumps, motors, actuators, sensors, and lighting components to precise tolerances Use precision tools including torque wrenches, calipers, micrometers, and alignment tools to verify assembly accuracy Chase, repair, and maintain threads using taps, dies, and thread restoration techniques Perform functional testing, troubleshooting, and rework to ensure assemblies meet performance requirements prior to release Identify build issues, tolerance stack-ups, and design gaps; provide feedback to engineering and manufacturing teams Support continuous improvement efforts, helping refine build processes, tooling, and assembly standards Maintain a disciplined, clean, and safe work environment aligned with 5S and shop best practices What You Bring 7+ years of hands-on experience in mechanical assembly within manufacturing, industrial, aerospace, or custom fabrication environments Strong experience with mechanical systems, plumbing/pipe fitting, and wire harness assembly Ability to read and interpret detailed engineering drawings, schematics, and technical documentation High level of proficiency with hand tools, power tools, and precision measurement equipment Solid understanding of tolerances, alignment, sealing methods, and system integration Experience assembling complex, multi-disciplinary systems (mechanical + electrical + fluid systems) Strong troubleshooting skills and the ability to identify and resolve issues during build Self-directed, reliable, and able to take ownership of critical assemblies from start to finish Effective communicator who can work cross-functionally with engineering, fabrication, and production teams Preferred Experience Experience in low-volume, high-complexity builds or custom engineered products Background in themed entertainment, aerospace, automotive prototypes, or similar industries Familiarity with hydraulic or fluid systems, pumps, and control assemblies Experience supporting installation or field commissioning efforts Why WET At WET, your work is not hidden inside a product—it becomes part of a living system experienced by millions. The assemblies you build must not only meet spec, but perform reliably in highly visible, high-expectation environments. This is a role for someone who takes pride in precision, ownership, and execution—someone who understands that the quality of their work directly impacts the performance of world-class installations. If you’re a highly skilled assembler looking to apply your craft to something truly unique and technically demanding, WET offers the opportunity to build at a level few environments can match. If you want, I can also calibrate this for pay transparency, union/non-union alignment, or tweak language to better target aerospace vs entertainment talent pools. WWW.WETDESIGN.COM Powered by JazzHR AcomATwqXz

Job Description Picture framer, The job opening is for a picture frame maker/assembler, picture framer. The applicant must have shop experience, and know how to use tools safely. Have an understanding of the process required to take an order from start to finish. Know material science pertaining to the display of artwork. Must posses the ability to measure in inches accurately, and do arithmetic. This is a physical job which requires standing, using power tools, some lifting, and ladder work. Company DescriptionArt Mechanics is an art services company that specializes in picture framing.Art Mechanics is an art services company that specializes in picture framing.

Job DescriptionJob Title: Mechanical Assembler (Electronics Industry) Key Responsibilities • Assemble mechanical components for electronic devices (e.g., circuit enclosures, power supplies, or mechanical modules) using hand tools, power tools, and assembly machines, • Read and interpret technical drawings, schematics, and blueprints to understand assembly requirements and specifications, • Install and secure internal components such as circuit boards, wires, connectors, and cables into the mechanical framework of devices, • Perform quality checks and inspections on completed assemblies to ensure all components are properly aligned and function correctly, • Conduct functional tests to verify assembly integrity and operational performance of mechanical systems in the devices, • Troubleshoot and adjust mechanical assemblies to meet quality standards or resolve issues identified during testing, • Follow safety protocols (including ESD and personal protective equipment) and maintain a clean and organized work area, • Record assembly data, defects, adjustments, and test results in production logs or digital systems, • Collaborate with team members and supervisors to meet production deadlines and resolve any challenges that arise during the assembly process Preferred Qualifications • Experience in electronics manufacturing (e.g., assembly of electronic enclosures, systems, or devices), • ISO certification or experience with quality control standards in an electronics environment, • Knowledge of ESD (Electrostatic Discharge) safety and best practices for handling sensitive electronic components Payrate: DOE $20.00-$25.00 Shift:: 1st shift Location: San Fernando Valley

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off, • Vision insurance 1st shift: 6:00 AM to 2:30 PM Qualifications • High School Diploma, GED or equivalent, • Relevant mechanical assembly experience, • Laser Engraving, • Quality control and parts inspection, • Visual and Mechanical inspection and troubleshooting skills., • Must be able to follow Standard Operating Procedures and process requirements., • Basic computer skills including familiarity with Microsoft Office (Excel, Word, Access), • Ability to lift and carry items weighing up to 50 lbs., • Ability to stand and walk around consistently thru a full work shift doing repetitive assembly tasks. Responsibilities • Prepare child parts for the next days assembly requirements, • Laser Engraving, • Quality Control and Parts Inspection, • Perform visual inspection of various automotive components for coating integrity, color requirements and damage per SOP instructions., • Perform mechanical assembly of various automotive components using automatic and manual presses, grease guns and other assembly tools and equipment., • Perform final inspection of assembled components using various inspection equipment, gages, etc., • Understand production schedule and daily assembly requirements of various product lines of parts.

Job Description Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 150 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate opening for a Mechanical Assembler located in City of Industry, California. This position is temporary with the opportunity for permanent employment. Job Summary: The Mechanical Assembler is responsible for assembling the mechanical components of Astrophysics x-ray security machines. This role involves using handheld tools to fasten and connect parts, including large panels, while maintaining quality and safety standards. Assemblers work in a team, each completing specific tasks to build units that are utilized globally. Essential Functions: • Assemble mechanical components of X-ray security systems in accordance with engineering drawings, work instructions, and manufacturing specifications, • Utilize hand and power tools to accurately fasten, secure, drill, and align components to required tolerances, • Install and connect large panels and structural components to ensure proper fit, alignment, and system integrity, • Collaborate with team members on assigned assembly tasks to efficiently complete units and meet production targets, • Inspect assembled components to ensure quality standards and safety requirements are met throughout the build process Education and Experience: • High School Diploma or GED, • 6 months to 1 year experience in mechanical assembly preferred Shift and Schedule: • Full-time, M-F, 7:00 am to 3:30 pm, with occasional overtime and weekend shifts as needed to support business operations Benefits & Perks: • Excellent medical, dental and vision benefits, • 401K plan with 4% employer match, • 11 paid holidays, 10 PTO days, • Free donuts on Fridays, company luncheons and year end party! Be part of a meaningful security mission with opportunities for personal and professional growth and development. Join our Astrophysics family today! Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call 1(909) 598-5488 and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis.

Job DescriptionEntry-Level AssemblerWork schedule: M-F 7am-3:30pm with OT Hourly rate: $18hr.Location: San Fernando Valley Job Summary:We are seeking a motivated and detail-oriented Entry-Level Assembler to join our team. The ideal candidate will have basic experience using tools and equipment and the ability to communicate English. This role involves assembling components and products according to specifications, ensuring quality and efficiency. Comprehensive training will be provided. Key Responsibilities: Assemble components and products according to detailed instructions, blueprints, and diagrams. Use basic tools and equipment, such as drills, wrenches, and measuring devices, to complete assembly tasks. Inspect parts and finished products to ensure they meet quality standards. Communicate effectively in English to follow instructions and collaborate with team members. Follow safety guidelines and maintain a clean and organized workspace. Report issues or discrepancies to the supervisor for resolution. Assist in maintaining inventory of parts and supplies as needed. Support team members in achieving daily production goals. Qualifications: Basic experience using tools and equipment, such as drills, wrenches, and measuring devices. Proficient in English for verbal and written communication. Ability to follow detailed instructions and work with minimal supervision. Strong attention to detail and commitment to quality. Basic math and problem-solving skills. Ability to stand, lift, and perform repetitive tasks for extended periods. Positive attitude and willingness to learn new skills. Preferred Skills: Prior experience in manufacturing or assembly (not required). But would be a big plus.

Job DescriptionIntellisense Systems, Inc. is a privately held company with a proven track record of developing and deploying innovative products that successfully operate in the most extreme environments. We are a fast-growing Southern California technology innovator that solves tough, mission-critical challenges for our customers in the aerospace, defense, and commercial markets. We design, develop, and manufacture advanced products for ground, maritime, and airborne applications. We are seeking an Electronics Assembler I for our Operations Department. The successful candidate will have electronics and mechanical manufacturing experience and will be proficient in soldering, mechanical assembly, and epoxy potting. The Electronics Assembler I will be responsible for assembly of an advanced electro-mechanical product to AS9100 standards. This is an on-site role located in Torrance, CA Responsibilities: • Solder electronic components, • Perform prototype assembly per drawings and specifications, • Perform production assembly, testing, and inspection, • Perform board level programming and testing using automated test fixtures, • Maintain material inventory with proper paperwork and electronic records per established AS9100 procedures, • Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management at any time. Requirements: • High School Diploma, • Preferred: Associate degree in Electronics, • 1-3 years in high-tech manufacturing/production environment, • Experience with printed circuit board assembly and testing, electrical harness production, ESD control, and handling optical components are a plus, • Good soldering skills (SMT, through-hole, and harnessing), • Good understanding of soldering work standards (IPC-A-610/J-STD-001), • Understanding of inventory control in an electronics production environment, • Must be capable of following assembly procedures and drawings to perform mechanical system integration, as well as follow test procedures to perform functional testing., • Excellent verbal and written communication skills, • Ability to commit and work under deadlines, • Must be able to work in a challenging and engaging work environment that promotes teamwork, creativity, accountability, and professional development, • Current IPC-A-610 or J-STD-001 certification is a plus What You Can Expect: • The ability to innovate, develop, and transition prototype technologies into new products, and to be rewarded for successful transitions., • The chance to continually work on new differentiating technologies and implement simple elegant solutions to meet customer needs and that make an impact., • Leadership that enables its engineers with all the tools they need to be successful. Pay Range: $24.00-$30.00/hour (However, base salary for this position will vary based on your skills, qualifications, and experience) Benefits: • 4 Weeks PTO a year (including 40 hours of PTO your first day), • 10 paid holidays, • 401(k) with 100% employer matching up to 4% of salary (no vesting period), • Multiple options for Medical, Vision, Dental Insurance plans, • Health Savings Accounts, • Flexible Spending Accounts, • Tuition Assistance (30% of Tuition with a minimum qualifying grade), • 100% Paid Employee Assistance Program (EAP), • 100% Paid Basic Life and AD&D Insurance, • 100% Paid Workers Compensation Insurance, • Voluntary Life Insurance The unique culture at Intellisense offers the entrepreneurial spirit of a smaller company with the support and expertise of a larger organization. We are looking for individuals that have a wide breadth of experience while also being subject matter experts in their respective field. If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact us by phone at 424-319-7813 or by email at HRSupport@intellisenesinc.com Unless otherwise stated in the requirements section of an individual job listing, our positions require U.S. Citizenship, U.S. Permanent Residency, or other status as a U.S. Person as defined by 8 USC 1324b(a)(3). Intellisense Systems, Inc is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, or other legally protected status. #26027 Powered by JazzHR dISFLJ5OCK

Job Description Job Summary We are seeking a skilled Assembler to join our dynamic team. The ideal candidate will be responsible for assembling and fabricating mechanical components with precision and attention to detail. This role requires a strong understanding of various assembly techniques and the ability to work with hand tools and electronic components. The Mechanical Assembler will play a crucial role in ensuring that our products meet high-quality standards and are delivered on time. Responsibilities • Assemble mechanical components according to specifications and blueprints., • Fabricate parts using hand tools, machines, and soldering techniques., • Work with printed circuit boards (PCB) and ensure compliance with IPC 610 standards., • Utilize measuring instruments such as calipers and ohmmeters to verify dimensions and electrical properties., • Perform electrical wiring tasks, including connecting logic controllers and other electronic devices., • Conduct quality checks throughout the assembly process to maintain product integrity., • Collaborate with team members to troubleshoot assembly issues and improve processes., • Maintain a clean and organized work environment to promote safety and efficiency. Experience • Proven experience in mechanical assembly or a related field is preferred., • Familiarity with surface mount technology (SMT) is a plus., • Proficient in using hand tools, soldering equipment, and measuring devices., • Knowledge of electrical wiring practices and logic controllers is advantageous., • Ability to read technical documents, schematics, and blueprints effectively., • Strong attention to detail with a commitment to producing high-quality work., • Excellent problem-solving skills and the ability to work independently or as part of a team., • Soldering

Job DescriptionCzinger Vehicles is redefining the future of automotive design and manufacturing. Founded in 2019, we're pioneering a new era of performance vehicles through revolutionary, proprietary technology that blends human-AI design with sustainable manufacturing. Our flagship 21C hypercar, celebrated as the world's fastest production vehicle and for its record-setting runs at Goodwood Hill Climb, Circuit of the Americas, and Laguna Seca, showcases the innovation behind over 550 patents in AI-driven generative design, materials, and additive manufacturing. With our three core pillars of dominating performance, iconic design, and revolutionary technology, Czinger is at the intersection of deep technology, consumer products, and high-performance branding. We invite you to join our world-class talent in shaping the future of the automotive industry. Here, you'll be part of a groundbreaking journey that pushes the limits of performance, design, technology, and sustainability. Temporary role (6 months)Purpose The Czinger Vehicles Production team is seeking a highly talented and detail-oriented Parts Assembler to join our team in Torrence, CA building the world's fastest hypercars. We are seeking temporary support from an individual who possesses a drive and commitment to deliver state-of-the-art vehicles where quality and performance is second to none. The Role • As a Temporary Manufacturing Parts Assembler, you will be responsible for supporting all aspects of part changes including part makes, part sub-assemblies, part reworks and part revision changes., • Assignments include containments, repairs and re-working non-conformant parts., • You will be working within a structured, process driven production system following detailed instructions ensuring a consistent product, delivered on time, every time., • You will ensure that your work area within the factory is kept clean, professional and presentable at all times., • You will help improve both the product and the process, striving for efficiency while maintaining top quality. Basic Qualifications, • Prior hands-on experience with delicate and expensive materials., • Prior hands-on fabrication experience within a manufacturing environment is needed, • Must be experienced and comfortable in using all major hand, cutting and trim tools, • Must have the ability to follow verbal and written instructions, • Strong written and verbal communication skills required, • Must have solid Microsoft software experience (Excel, PowerPoint, Word), • Must be willing to work overtime and weekends as needed to meet deadlines, • Must be able to work well with others and possess a strong ability to adapt and adjust within a fast-paced environment Pay Range$28—$32 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity CZV, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. CZV, Inc. provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.