Trabajos assembler en Buffalo, New YorkCrear alertas

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. This position is responsible for assisting Welding Fitters, Master Fitters, Forepersons, and Manufacturing Supervision staff as directed in the manufacture and assembly of metallic products supplied to the construction industry. More specifically, assist in fitting sub-assemblies as instructed, including but not limited to, tie downs, straightening, grinding, and stud welding on strip seal steel rails, using hand tools, overhead cranes, and welding equipment. Attention to safety and quality is essential to this position. Salary Range: $24 - $27 an hour based on education, experience, and qualifications of the applicant. This is a night shift position; 4-10 hour shifts Monday-Thursday. Work hours are typically 5:30pm - 4:00am. Qualifications • High school diploma or equivalency required, additional course work with emphasis on welding preferred., • Ability to read and understand shop drawings and other written instructions., • Use of hand tools and basic TIG and GMAW welding., • Comply with all safety regulations, including Safe Work Permits, training requirements, and use of safety equipment., • Must be able to lift and manage material of up to 50 pounds unassisted; walk or stand for long periods of time; bend, stoop, or kneel if required; wear all required PPE., • Possess the legal right to work and remain in the United States without sponsorship. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • Collaborate with team members, support cross-functional tasks, and contribute to process improvement initiatives. Requirements: • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Must be able to lift up to 25 pounds from floor to waist. Occasionally required to lift up to 50 pounds. Core Competences: • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • Must be able to work in a multi-tasked environment. Preferences: • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat., • Normal exposure to moderate noise levels. Occasional exposure to high noise, levels where hearing protection will be required. Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . APPLY NOW

With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemicals company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF 11.20 billion in sales in 2025. Job Description Watson Bowman Acme, a Sika company, is a manufacturer and supplier of expansion joint solutions for the transportation sector, including bridge and highway fabrication, preservation, and tunnels. This position is responsible for assisting Welding Fitters, Master Fitters, Forepersons, and Manufacturing Supervision staff as directed in the manufacture and assembly of metallic products supplied to the construction industry. More specifically, assist in fitting sub-assemblies as instructed, including but not limited to, tie downs, straightening, grinding, and stud welding on strip seal steel rails, using hand tools, overhead cranes, and welding equipment. Attention to safety and quality is essential to this position. Salary Range: $24 - $27 an hour based on education, experience, and qualifications of the applicant. Qualifications • High school diploma or equivalency required, additional course work with emphasis on welding preferred., • Ability to read and understand shop drawings and other written instructions., • Use of hand tools and basic TIG and GMAW welding., • Comply with all safety regulations, including Safe Work Permits, training requirements, and use of safety equipment., • Must be able to lift and manage material of up to 50 pounds unassisted; walk or stand for long periods of time; bend, stoop, or kneel if required; wear all required PPE., • Possess the legal right to work and remain in the United States without sponsorship. Additional Information • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description Production Operator- Panel Assembler Facility: Buffalo, NY General Description The Production Operator – Panel Assembler is responsible to effectively operate the booth & work cell, as well as any secondary equipment to which they are assigned, safely and efficiently. They must use any required equipment, tooling, and measuring devices to ensure a quality product is produced. They must demonstrate the ability to take directions from the immediate manager and designated management representatives. Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when booths., • Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate., • Ability to place panels correctly to reduce rework and extra trimming on tanks., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with adhesives in a manufacturing environment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time.

Job Description We are seeking a mid‐level Assembly Technician to build custom and one‐of‐a‐kind heat transfer systems. This is not an assembly‐line position. Each unit is unique and requires hands‐on mechanical skill, attention to detail, and the ability to follow technical documentation. Assemblies are completed independently and in small teams using flow schematics, electrical drawings, photos, and other job aids. Work is performed using a variety of hand tools, electric tools, and pneumatic tools. Due to the specialized and custom nature of our products, training can b longer‐term and in‐depth. Unit completion expectations range from 10-80 hours per. Company Description70 years leading in Custom Heat Transfer. We do what most won't or can't do.70 years leading in Custom Heat Transfer. We do what most won't or can't do.

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Job Description Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when booths., • Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate., • Ability to place panels correctly to reduce rework and extra trimming on tanks., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with adhesives in a manufacturing environment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time. 1st Shift: 6:00 am-4:30 pm Monday-Thursday About Us We are 40 000 men and women who meet the challenges faced by our automotive, aviation, defence and industry customers every day. Our passion for challenge and our enthusiasm encourage us to imagine, design and produce high performance and innovative fluid, sealing system and anti-vibration solutions. Working at Hutchinson means being curious about everything, contributing to the evolution of mobility and reducing carbon emissions. Join us and show what drives you! A French company with an international presence (25 countries): 170 years of history and passing on our know-how. 5 billion in turnover, with 5% invested in R&D.

Job Description Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when booths., • Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate., • Ability to place panels correctly to reduce rework and extra trimming on tanks., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with adhesives in a manufacturing environment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time. 1st Shift: 6:00 am-4:30 pm Monday-Thursday About Us We are 40 000 men and women who meet the challenges faced by our automotive, aviation, defence and industry customers every day. Our passion for challenge and our enthusiasm encourage us to imagine, design and produce high performance and innovative fluid, sealing system and anti-vibration solutions. Working at Hutchinson means being curious about everything, contributing to the evolution of mobility and reducing carbon emissions. Join us and show what drives you! A French company with an international presence (25 countries): 170 years of history and passing on our know-how. 5 billion in turnover, with 5% invested in R&D.

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Job Description Specific Duties • Retains all specific duties of Production Operator Job Description., • Follow proper start up and shut down procedures when booths., • Alert immediate manager of any issues with booths and assist with cleaning and maintenance of the equipment when safe and appropriate., • Ability to place panels correctly to reduce rework and extra trimming on tanks., • Follow all applicable environmental, health and safety rules and procedures and immediately report all dangerous situations, near-misses, and injuries., • Participate in developing and updating risk assessments and review all applicable risk assessments annually. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Qualifications • Retains all qualifications of Production Operator Job Description., • Previous experience working with adhesives in a manufacturing environment is preferred. Physical Demands • The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully., • The employee frequently is required to stand; walk, talk and hear. The employee is occasionally required to climb or balance and stoop. A large degree of lifting (moderate to heavyweight), bending, squatting and maneuvering. Specific vision abilities required by this job include close vision, for viewing a computer terminal distance vision, peripheral vision, depth perception vision for moving objects and ability to adjust focus., • This position is not substantially exposed to adverse environmental conditions., • The ability to work with chemicals in the proper environment and while wearing PPE. Personal Protective Equipment The following list of PPE is required while in the manufacturing area: • Safety Glasses conforming to ANSI Z87.1 or higher, • Steel Toe Safety Shoes conforming to OSHA General Industry Standards 29 CFR 1910, • Hearing protection conforming to OSHA General Industry Standards 29 CFR 1910, • The ability to wear a dust mask conforming to OSHA General Industry Standards 39 CFR 1910.134, • Additional PPE may be required depending on the department Hutchinson Industries, Inc. is an equal opportunity employer. This is a non-exempt position. Hutchinson Industries, Inc. reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between Hutchinson Industries, Inc. nor the employee, and either one may terminate employment without notice at any time. 1st Shift: 6:00 am-4:30 pm Monday-Thursday About Us We are 40 000 men and women who meet the challenges faced by our automotive, aviation, defence and industry customers every day. Our passion for challenge and our enthusiasm encourage us to imagine, design and produce high performance and innovative fluid, sealing system and anti-vibration solutions. Working at Hutchinson means being curious about everything, contributing to the evolution of mobility and reducing carbon emissions. Join us and show what drives you! A French company with an international presence (25 countries): 170 years of history and passing on our know-how. 5 billion in turnover, with 5% invested in R&D.

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $28.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler/Welder Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $27.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Centrifugal Assembler Location: Buffalo, NY Schedule: Monday - Friday 7:00AM - 3:30 PM Pay Range: Starting Pay will range between $28.00 - $32.00 per hour depending on qualifications and experience. This is a full-time, hourly position. About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: We are looking for a skilled Assembler with MIG and TIG welding experience to perform a variety of tasks in conjunction with the assembly of our products. This role is responsible for assembling components, performing MIG and TIG welding as required, and ensuring all parts fit correctly and meet quality specifications for the final product. The ideal candidate will safely perform high-level, continuous production work while maintaining strict adherence to quality and safety standards. Assignments may vary based on business demands. Responsibilities: • Perform assembly and testing of industrial machinery and compression equipment following standard work procedures., • Read and interpret blueprints, method sheets, diagrams, and specifications to assemble components accurately., • Operate pneumatic, power, and hand tools to complete assembly, welding, wiring, painting, and related tasks., • Inspect parts and finished products to detect quality defects and ensure compliance with safety standards., • Load and unload equipment using fork trucks and hoists; support material handling and inventory activities., • Maintain tools and equipment, initiate repair work orders as needed, and ensure proper upkeep., • Maintain a safe, clean work environment in compliance with all safety rules and procedures., • High School Diploma or General Equivalent Diploma (GED) is required., • Familiar with and ability to utilize all hand tools including wrenches, sockets, hammers, tape measures, crimpers, cutters, and steel banding., • MIG & TIG welding., • 3+ years experience welding to exact ASME specifications., • Must know proper purging techniques for stainless steels., • Knowledge of and willingness to comply with all general work rules, policies and procedures, including safety guidelines and procedures., • Able to rely on experience and judgment to plan and accomplish goals., • Ability to learn to operate all equipment associated with the job; including, but not limited to, power hand tools, forklifts, skyjacks, cranes, and measuring devices., • Ability to identify routine problem causation, and correct routine problems, and willingness to learn., • Broad working knowledge and experience with standard work instructions., • Team oriented, must have the ability to work cohesively with others., • Must possess ability to work well in a manufacturing environment., • Must be detail-oriented and self-motivated., • 3+ years in manufacturing experience preferred., • Prior experience in mechanical assembly, electrical wiring, precision measurement, blueprint reading and pipefitting is preferred., • Ability to complete X-ray quality work to ASME B31.3, • Knowledgeable of and able to utilize computer systems., • Frequently required to sit, stand, and walk for extended periods., • Reaching and handling with high levels of dexterity., • Occasionally required to work near moving mechanical equipment., • Frequent exposure to various chemicals, sealants, and lubricants., • Occasionally required to work outside where weather conditions range from moderate cold to moderate heat. What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit . What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. APPLY NOW

National Assemblers - - Responsibilities: Assemble furniture (bed frames, desks, chairs, etc.Mount and install TVs, pictures, and other home fixtures; Set up entertainment systems, soundbars, and streaming devices; Provide top-notch customer service and educate customers; Maintain accurate records

National Assemblers - - Responsibilities: Assemble bikes, grills, furniture, and a variety of products with precision and craftsmanship; Use reliable transportation to reach designated retail locations; Build a reputation for excellence by delivering exceptional service and ensuring 100% customer s

National Assemblers - - Responsibilities: Bed Warranty Repairs Troubleshoot and fix mechanical or structural issues on various bed types; Furniture Assembly Assemble bed frames, desks, chairs, shelving units, and more; Fixture Mounting & Installation Install wall fixtures such as painting, mirro

National Assemblers - - Responsibilities: Assemble bikes, grills, furniture, and a variety of products with precision and craftsmanship; Use your reliable transportation to reach designated retail locations; Build a reputation for excellence by delivering exceptional service and ensuring 100% custo

With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries.Sik

In this role, the Assembler, where you will provide friendly assistance to customers and team members, coordinate with other departments when needed, and respond to questions by phone, email, or in-person.

We have an opening for a talented Assembler to gain knowledge of company offerings to better serve clients, provide excellent service to customers and team members, and manage daily responsibilities with a focus on quality and efficiency.

Assembler Job Duties: Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists; gathering parts, subassemblies, tools, and materials.

Job Description Title: Assembly Mechanic Report to: Production Manager Job Location: Buffalo, NY Job Summary The Assembler is responsible for the mechanical assembly and bolting of piping systems for skidded equipment, working from arrangement drawings and P&IDs to ensure accurate builds. Duties and Responsibilities: • Bolting of piping systems for skidded equipment, • Able to work from arrangement drawings & piping and instrumentation diagrams, • Able to work with hand tools (drills, grinder, etc.), • Capable of drilling and tapping of holes up to ½” in diameter, • Ability to drive a tow motor (fork lift), • Able to use overhead and jib cranes, • Able to work independently, follows instructions, • Work safely by following both OSHA and Cobey’s safety rules and regulations, • Perform other duties as assigned Special Requirements: • Must know how to work with bolting flanged and gasketed connections, including adhering to torque requirements., • Able to lift 50 lbs., • Need to provide personal tools, • Welding skills are a plus, • Basic pipe fitting skills are a plus Credentials and Experience: • Requires a high school diploma/GED, • One year technical training or work experience

Job Description Job Title: Mechanical/Electrical Assembler – Modular Manufacturing Location: Buffalo, NY (On-Site) Department: GTI Energy – Manufacturing Employment Type: Full-Time | Non-Exempt About GTI Fabrication GTI Fabrication is a leader in industrial manufacturing, modular construction, and metal fabrication, specializing in the design and assembly of modular structures, energy storage enclosures, and shipping container-based systems. We support industries including defense, military, energy storage, disaster relief, and commercial construction. Our team includes welders, electricians, assemblers, HVAC technicians, fabricators, and engineering professionals working together to build high-quality, mission-critical modular solutions. This Mechanical/Electrical Assembler role is based at our GTI Energy manufacturing facility in Buffalo, NY. Position Overview As a Mechanical/Electrical Assembler, you will support the assembly, installation, and integration of mechanical, electrical, and HVAC components into energy storage enclosures and modular industrial structures. This role is ideal for individuals with experience in mechanical assembly, electrical assembly, HVAC installation, construction labor, or general industrial assembly. Key Responsibilities 1. Component & System Assembly • The Mechanical/Electrical Assembler will assemble, install, and integrate mechanical, electrical, and structural components into energy storage enclosures and modular units., • Follow assembly drawings, blueprints, schematics, and written work instructions. 2. Mechanical Assembly • Perform hands-on tasks: cutting, drilling, mounting, bolting, fastening, and structural integration., • Install mechanical components, hardware, ducting, frames, and industrial parts. 3. Electrical Assembly & Wiring • A Mechanical/Electrical Assembler will assist with running conduit, pulling wire, cable routing, and installing electrical components., • Use multimeters, meters, and diagnostic tools to test and troubleshoot circuits., • Perform basic electrical installation, maintenance, and repairs (as qualified). 4. HVAC Installation • Install HVAC units, ducting, vents, and climate control systems for modular enclosures. 5. Blueprint Interpretation • Read and follow simple blueprints, diagrams, and assembly drawings to ensure accurate integration. 6. Power Tools & Equipment • Operate drills, saws, grinders, impacts, and other power tools safely., • Experience as a Mechanical/Electrical Assembler, construction laborer, mechanical assembler, electrical assembler, HVAC installer, or industrial assembler., • Proficiency with power tools, tape measures, hand tools, and diagnostic equipment., • Ability to read and interpret basic blueprints and diagrams., • Experience with electrical tasks (conduit, wiring, testing) or HVAC installation (preferred)., • Ability to lift 50 lbs+, stand for long periods, and work in an industrial manufacturing environment., • Modular construction, containerized structures, or energy storage system assembly., • Mechanical, electrical, HVAC, or fabrication background., • Fast-growing industrial manufacturing environment., • Hands-on exposure to modular construction, energy storage systems, and electrical integration.

Job Description Join P&G Steel Products Co Inc in Buffalo, New York, as a Full-Time Production Assembler and immerse yourself in an innovative manufacturing environment. This onsite position allows you to be part of a dedicated team committed to excellence and safety. You'll gain hands-on experience in the production process, contributing to high-quality steel products that make a difference. With a competitive pay rate of $16.00 per hour, this role offers a rewarding opportunity to enhance your skills while being part of an essential industry. Your contributions will directly impact our production efficiency and product quality. You will be offered great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Paid Time Off, and Employee Discounts. Take the next step in your career and apply today to become an integral part of our dynamic team at P&G Steel Products Co Inc. Your role as a Production Assemblers As a new Production Assembler at P&G Steel Products Co Inc, you can expect to engage in various tasks that ensure efficient manufacturing processes. Your day-to-day responsibilities will include assembling steel products according to detailed specifications and blueprints. You will operate machinery and tools safely while maintaining a clean and organized workstation. Additionally, you'll be responsible for conducting quality checks on completed assemblies to meet our high standards. Collaboration with fellow team members is essential, as you'll communicate regularly to address any production challenges. You will also participate in ongoing training to enhance your skills and adapt to new technologies. Following safety protocols diligently is crucial to maintaining a secure work environment. Your role will contribute significantly to our commitment to innovation and excellence in manufacturing. Are you the Production Assemblers we're looking for? To be successful as a Production Assembler at P&G Steel Products Co Inc, you should possess a strong attention to detail and a commitment to quality. Effective communication skills are essential, as you'll need to collaborate with team members and supervisors to ensure smooth operations. A solid understanding of basic mechanical principles will help you grasp assembly processes quickly. Moreover, manual dexterity and good hand-eye coordination are crucial for assembling parts accurately and efficiently. You should also be able to work well under pressure while meeting production deadlines. Job Description ESSENTIAL FUNCTIONS AND RESPONSIBILITIES• Prepares work to be accomplished by studying assembly instructions, blueprint specifications, or parts lists; gathering parts, subassemblies, tools, and materials.• Positions parts and subassemblies by using templates or reading measurements.• Utilize hand tools, power tools and measuring devices such as tapes, rulers and pressure gauges.• Assembles components by examining connections for correct fit; fastening parts and subassemblies.• Perform visual inspection of raw materials and products using magnifiers and microscopes.• Verifies specifications by measuring completed component.• Using grind equipment to ensure proper tolerance and finish.• Maintains safe and clean working environment by complying with procedures, rules, and regulations.• Conserves resources by using equipment and supplies as needed to accomplish job results.• Contributes to team effort by accomplishing related results as needed.• Perform other duties as assigned. QUALIFICATIONS High school diploma or general education degree (GED) and three to six months related experience and/or training; or equivalent combination of education and experience required. Read and interpret electronic/hydraulic schematics, blue prints, and engineering and weld drawings a plus. Must have a clear understanding of general math (including fractions and decimals) and have the ability to read, write, speak, and comprehend English. PHYSICAL REQUIREMENTS Hearing: Adequate to perform job duties in person, over the telephone, and on the production floor. Speaking: Must be able to communicate clearly in person, over the telephone, and on the production floor. Vision: Visual acuity adequate to perform job duties, including visual examination of manufactured parts and reading information from printed sources and computer screens. Other: Requires frequent lifting and carrying items weighing up to 50 pounds unassisted, including assisting co-workers when required. Grip continuously-for tool use, and parts handling. Adequate physical ability including sufficient manual dexterity to perform the requisite manufacturing duties. Requires frequent bending, reaching, repetitive hand movements, standing, walking, squatting and sitting, with some heavy lifting, pushing and pulling exerted regularly throughout a regular work shift.

Job DescriptionAssembly Technician (2nd Shift) | GTI Fabrication – Buffalo, NYCompany Overview GTI Fabrication specializes in the design, engineering, and manufacturing of custom modular structures, shipping container-based solutions, and ballistic metal fabrication. We serve industries including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are built in-house at our Buffalo, NY facility, covering applications such as military training enclosures, medical facilities, energy storage solutions, and expeditionary camps. Join our team of fabrication, engineering, and government specialists to help deliver high-quality, mission-critical solutions. Position Overview We are hiring a 2nd Shift Assembly Technician to perform mechanical and component assembly, blueprint reading, and power tool operation. This role is ideal for individuals with experience in mechanical assembly, electrical assembly, HVAC, or general construction. ???? Shift: Monday – Friday | 3:30 PM – 12:00 AM Key ResponsibilitiesAssembly & Component Integration • Assemble and integrate components and systems based on provided specifications., • Perform mechanical assembly with precision, ensuring compliance with safety protocols., • Utilize power tools and other equipment for construction and assembly processes.Blueprint Interpretation, • Assembly Technicians must read and interpret blueprints and technical drawings to ensure accurate component integration., • Follow assembly guidelines and adhere to quality control standards.Required Qualifications, • Previous experience in assembly, mechanical assembly, electrical assembly, HVAC, or general construction preferred., • Assembly Technicians must have proficiency in using power tools and measuring equipment (e.g., tape measures)., • Strong ability to read and understand simple blueprints., • Excellent attention to detail and commitment to workplace safety. ???? Apply today and join the leader in modular fabrication! GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Company Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. This position will be based out of the Phoenix, Arizona location as part of GTI Energy. As a Construction Laborer/Assembler at GTI Energy, you will be an essential part of our team responsible for building and integrating components and systems into Energy Storage Enclosures. Job Responsibilities: • Component Integration: Assemble and integrate components and systems into Energy Storage Enclosures according to provided specifications., • Mechanical and Electrical Assembly: Perform mechanical and electrical assembly tasks, ensuring precision and adherence to safety protocols., • HVAC Integration: Install HVAC systems within the enclosures to maintain optimal temperature and environmental conditions for energy storage equipment., • Blueprint Reading: Utilize your ability to read and interpret simple blueprints to ensure accurate assembly and integration., • Previous experience in assembly, mechanical assembly, electrical assembly, HVAC, and/or general construction is highly desirable., • Proficiency in using power tools and tape measures., • Strong ability to read and understand simple blueprints., • Excellent attention to detail and a commitment to safety protocols. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Company Overview: GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. This position will be based out of the Phoenix, Arizona location as part of GTI Energy. As a Construction Laborer/Assembler at GTI Energy, you will be an essential part of our team responsible for building and integrating components and systems into Energy Storage Enclosures. Job Responsibilities: • Component Integration: Assemble and integrate components and systems into Energy Storage Enclosures according to provided specifications., • Mechanical and Electrical Assembly: Perform mechanical and electrical assembly tasks, ensuring precision and adherence to safety protocols., • HVAC Integration: Install HVAC systems within the enclosures to maintain optimal temperature and environmental conditions for energy storage equipment., • Blueprint Reading: Utilize your ability to read and interpret simple blueprints to ensure accurate assembly and integration., • Previous experience in assembly, mechanical assembly, electrical assembly, HVAC, and/or general construction is highly desirable., • Proficiency in using power tools and tape measures., • Strong ability to read and understand simple blueprints., • Excellent attention to detail and a commitment to safety protocols. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job Description Job Summary: The Production Associate will be involved in making the major system components that are provided directly to the Tectran customer. This person may be asked to work on various assembly lines within the production department. The ideal candidate will be results-driven, will have the ability to take initiative, and be able to work in a team atmosphere to deliver results. Responsibilities: • Assemble and package products according to work orders, • Perform quality checks, • Ensure efficiency targets are met to avoid shut down so that product moves to the next stage of the assembly process in a timely fashion, • Notify production lead person of any issues or discrepancies, • Keep work area clean and organized, • Other duties as assigned by Production Supervisor or Production Manager Education & Experience: • High School Diploma or equivalent (preferred), • Prior experience navigating a computer system and computer software (a plus) Required Skills & Abilities: • Strong math and analytical skills, • Ability to meet deadlines, • Flexible and adaptable with working in various production assembly lines, • Ability to read prints and/or drawings (a plus), • Well organized, • Good attention to detail, • Good verbal communication skills Safety Requirements: • Employee will be required to wear the provided PPE per the role requirements, • Follow site safety and any department specific protocols, • Report safety hazards or potential safety hazards to reporting Supervisor, • Attend company safety meetings Physical Requirements: • Ability to stand for prolonged periods of time, • Must be able to lift and/or carry up to 50 pounds at a time on a regular basis, • Constant use of coordination and applying dexterity, • Frequent repetitive motions Perks: • Paid Time Off plus 10 Paid Holidays, • Health, Dental, Vision, Life and AD&D, and Voluntary insurance coverage options, • Health Savings Account, • 401(k) program with a company match, • Safety Shoes Reimbursement Program, • Wellness program, • $500 referral bonus TECTRAN is an equal opportunity employer. We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors Hours: 6 a.m. – 4:30 p.m. Monday – Thursday

Job Description Title: Assembler - Tuber Report to: Production Manager Job Location: Buffalo, NY Job Summary The Assembler - Tuber will play a key part in building high‑quality, custom equipment by installing tubing systems, working with a variety of fittings and instrumentation, and supporting fabrication and assembly tasks across the shop. Duties and Responsibilities • Install gas panel and piping skid tubing, tubing instruments, valves, and related components, • Read and interpret P&IDs, general arrangement drawings, and bills of material, • Plan tube routing layouts based on drawings, • Precisely bend tubing from ¼” to 1” OD, accounting for proper set‑back dimensions, • Work with industrial compression fittings, including Swagelok and Parker, • Install and work with instrumentation such as transmitters, gauges, actuators, and solenoids, • Fabricate custom tube lines using accurate measurements and layout techniques, • Apply proper level, plumb, and square concepts during tube installation, • Perform light fabrication work (drilling, tapping up to ½”, and cutting stainless brackets/supports), • Bolt piping systems, including flanged and gasketed connections, following torque requirements, • Operate tow motors, overhead cranes, and jib cranes, • Work independently while following instructions and production schedules, • Follow OSHA and Cobey safety rules and maintain a safe work environment, • Able to lift 50 lbs., • Must provide personal tools, • Welding experience a plus, • High school diploma or GED preferred (required in some cases), • Minimum 1 year of custom tube bending and fit-up

Job Description Power Drives, Inc. is a Buffalo‑based manufacturer specializing in custom‑engineered hose, tube, and fluid conveyance systems for a wide range of industrial and mobile equipment applications. Founded in 1946, PDI is known for delivering high‑quality, reliable solutions backed by strong engineering expertise and decades of industry experience. Pay Rate: $17.50 per hour. Employees have opportunities for salary increases through our tiered training program, as well as monthly performance incentives. CLIMATE CONTROLLED ENVIRONMENT Objective: To assemble, test and tag hoses, tubes, fittings, and accessories with the highest level of quality and efficiency. Minimum Requirements: High School Diploma or equivalent Job Requirements: • Ability to comprehend and execute work assignments with minimal follow up supervision, • Ability to stand throughout entire shift, • Be customer service and quality driven, • Ability to read and comprehend blueprints, • Ability to be cross trained in other functions, • Observant, attentive to detail, and quality conscious, • Self-motivated and task driven, • Basic math, reasoning, and problem-solving skills, • Ability to work independently or in a team environment, • Execute assignments as given by the supervisor or group leader, • Meet or exceed quality of work and quantity expectations, • Follow all work instructions, policies, work rules, safety guidelines, and work procedures, • Utilize measurement devices like calipers, digital scales, and gage clocks to perform quality checks as required, • Perform basic preventative equipment maintenance as assigned, • Participate in problem solving, continuous improvement, and customer complaint resolution efforts, • Immediately inform supervisor or group leader of all equipment, process, material, safety, or quality concerns, • Training other team members as assigned, • Participate in daily area clean up and more significantly facility clean-up efforts as assigned, • Read and understand product blueprints and technical data sheets as required, • Set up machinery and properly use protractors and other jigs and fixtures as required, • Ensure completed product and left-over materials are returned to proper locations This position demands physical strength, endurance, using industrial tools and machinery. Candidates must be comfortable with repetitive tasks, heavy lifting (up to 40 lbs.), standing for a long period of time, bending, twisting, pushing, pulling and working in a fast-paced production setting. 2026 Buffalo's Business First Best Places To Work Finalist

Installer] - PT or FT / Easy Payments With Competitive Pay Rates / Flexible Scheduling / Access to Handy's Large Customer Base - As a Handy Pro Furniture Assembler you'll: Be responsible for for assembling a variety of furniture pieces in our customers' homes; Assemble a wide range of furniture item

Position Summary: This position is responsible for the assembly of electronic components including hand soldering, basic assembly using hand tools, labeling, and packaging.The position requires visual inspection and, at times, functional testing to ensure quality workmanship, use of product drawings

This position is responsible for the assembly of electronic components including hand soldering, basic assembly using hand tools, labeling, and packaging.The position requires visual inspection and, at times, functional testing to ensure quality workmanship, use of product drawings and work instruct