Trabajos assembler en Rochester, New YorkCrear alertas

Job DescriptionDescription: General Job Summary: Responsible for assembly/packing of sheet metal components of small or medium sized parts, fitting and/or adjustment of inter-related parts and/or assembly based on written specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety processes and procedures in accordance with job and Company requirements., • Following specific written instructions and/or blueprints, assembles components into finished product., • Disassembles and re-builds products per specifications., • Conducts quality checks following quality process instructions., • Pack and labels product following packaging instructions., • Ensures that the work area is clean, orderly, and safe., • Work in packaging as needed, including packing large assemblies or parts., • Inspect parts for defects or damage prior to packing., • Make boxes, apply labels, verify counts, and follow packing instructions., • Follow directions on packing from Packaging Lead., • Assists with other duties as assigned by supervisor/manager. Supervisory Responsibilities: None Requirements: Education High school diploma or general education degree (GED) Experience 2-4 years related experience or training or equivalent combination of education and experience. Other Requirements: Additional mechanical training and/or blueprint reading a plus. Ability to use hand tools such as screw drivers, sockets, Allen wrench, air drivers, tape dispenser and material handling equipment such as tow motor. Ability to read and understand blueprints, quality and packing instructions. Computer Skills: None required. Language Skills: Intermediate Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or Associates of organization. Mathematical Skills: Basic Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate. Reasoning Ability: Intermediate Skills: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to sit; walk, stand for extensive periods of time, maneuver through the office and factory; use hands to finger, handle, or feel; reach with hands and arms; grasp and twist; talk or hear; and lift and/or or move equipment/product weighing up to 50 pounds. Utilize lift assist or work with another associate to lift anything greater than 50Ilbs. Must pass physical abilities test because of weight of assemblies being worked on. Work Environment: The work environment characteristics described here are representative of those an Associate encounter while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment may include humid conditions and extreme heat and cold. While performing the duties of this job the noise level in the work environment is usually loud.

Aerotek - JobID: JP-005696748 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

Aerotek - JobID: JP-005717033 [Production Operator / Assembly Line Worker] As a Mechanical Assembly Worker at Aerotek, you'll: Perform mechanical assembly on different electronic products; Read and interpret blueprints, and quality-check the final products; Perform other duties as assigned.

Aerotek - JobID: JP-005717782 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

Aerotek - JobID: JP-005715700 [Production Operator / Assembly Line Worker] As a Light Industrial Worker at Aerotek, you'll: Pick and pack, ship, and perform a cycle count; Participate in counting inventory for cycle counts and maintaining stock; Measure, cut, crimp, wrap, and put fittings on the end

Electronic/Mechanical Assembler.Start Your Career in Manufacturing by doing Mechanical/Electronic Assembly.Company: Yoh, working with our client L3Harris.Are you ready to learn new skills and build technology that helps protect military personnel and first responders? Yoh is hiring entry-level Assem

In this role, the Assembler, where you will provide friendly assistance to customers and team members, coordinate with other departments when needed, and respond to questions by phone, email, or in-person.Additional duties include manage simple records and enter information accurately, help organize

At Kelly® Professional & Industrial, we're seeking Assemblers / Finishing Associates to work for a premier optics manufacturer in West Henrietta, NY. Summary: As a Finishing Associate, you'll help manufacture precision optical components used in medical and scientific equipment.

Job Description ASSEMBLER Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as an Assembler. The Assembler is responsible for the assembly of product according to the project specifications, assisting with the final product preparation for delivery while visually inspecting parts and assembled pieces for defects. Successful candidates will possess: • A HS Diploma or GED;, • 1-2 years of previous manufacturing experience;, • Ability to use an air gun, air drivers, other hand and power tools and a pallet truck;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to sit for extended periods and manipulate items with dexterity;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans, • Vacation, Paid Sick Leave and Company Paid Holidays, • Company Paid Life Insurance, • Optional Short-Term and Long-Term Disability Available, • 401k with Company Match According to the New York Pay Transparency law, pay range for this job is $18.00 - $27.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources. Monday through Friday 7:30 am to 4:00 pm Full time employment (39.75 hours per week)

Are You A Hands-On Problem Solver?.Imagine a job where you get paid based on the quality and speed of your work, with no cap on your earnings.You're the go-to person when it comes to assembling bikes, grills, furniture, or any other product.You love working independently, have an entrepreneurial min

Job Description Title Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary An RPO Assembler will be responsible for producing high precision assemblies or components with strict adherence to established work instructions and specification sheets. The job requires a very high level of concentration and fine detail, along with the ability to maintain consistent process proven by frequent in process inspection. In addition to processing parts, an assembler will perform testing using various optical test equipment and will also maintain all required build records. This role will be performed in a class 10,000 clean room. You Will: • Use tools and equipment to produce high precision assemblies or components and meet daily production targets, • May require the use of test equipment to measurements of completed work and work in process, • Weight, properly label and transfer chemicals and adhesives for use in assembly, • Communicate with lead, supervisor or area manager about any issues or problems in production immediately, • Process parts or components on jobs in que 100% of your available time, • Ensure that all required data entry is occurring for each job and that all required information is being accurately entered, • Adhere to check good pass good inspection criteria and in process inspection for all jobs, this includes daily calibration and expiration checks for all areas work is to be done., • Strict adherence to trained process / work instruction and ownership of communicating any inconsistencies, questions or issues, • Clean and maintain tooling, machinery and work area daily, • Follow all company safety precautions, policies and procedures. You Have: • Minimum of 2 years’ experience in a fast-paced, production/manufacturing environment related to precision assembly or equivalent work experience desired, • Optical Assembly experience a plus!, • GED or High School diploma – prefer vocational education, • Familiarity with computers to include but not limited to Microsoft Office, • Proficient math skills, • Ability to follow, repeat and adhere to detailed instructions while maintaining an attention to detail, • Ability to work in a challenging, fast paced and high-stress environment, • Good mental dexterity and visual acuity, • Excellent communication skills, • Can maintain clean environment and works to maintain the environment as such., • Good time management skills You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, reach with hands and arms and to use hands and fingers to handle, maneuver parts, • The employee frequently is required to stand, walk, stoop, kneel, crouch, talk and hear, • The job may involve prolong periods of sitting/standing, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp, • The employee is frequently required to use the computer, • The job may require regular lifting of up to 50 lbs., • Job requires flexibility in schedule and potential overtime or weekend work Work Environment: • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as needs require Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. RPO offers a competitive work life balance with the opportunity to grow within a unique industry and along with a collaborative, motivated team to drive key programs.

Job Description Job purpose Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs. Duties and responsibilities • Maintains proper quality and quantities of manufactured materials., • Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners., • Perform SPC on all related jobs as required., • Operate degreasing systems as required., • Able to set-up equipment where applicable., • Able to calibrate and zero equipment., • Perform preventative maintenance., • Use general measuring instruments, such as indicator, calipers, and height gages., • Rotate from one job to another if needed., • Maintain accurate documentation., • Follows all established company policies, • Follows all established safety procedures and precautions. Including filing incident/accident reports., • Notifies Supervisor of all unsafe/hazardous conditions or defective equipment., • High School Diploma/GED, • Be able to follow written and oral instructions., • Previous employed in a production environment helpful., • Able to communicate., • Math aptitude., • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available., • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work. #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran B Shift: Mon-Thurs: 2:45pm - 12:15am Fri: 2:45pm - 6:45pm

Job Description Job purpose Responsible for assembly and/or scanning of small or medium sized parts, fitting and/or adjustment of interrelated parts and/or assembly, adjustment and/or repair of sub-assemblies and major assemblies per process sheets. Could also be responsible for teardown, cleaning and reassemble of refurbs. Duties and responsibilities • Maintains proper quality and quantities of manufactured materials., • Operate small equipment such as presses, magnetizing/demagnetizing equipment, scanners., • Perform SPC on all related jobs as required., • Operate degreasing systems as required., • Able to set-up equipment where applicable., • Able to calibrate and zero equipment., • Perform preventative maintenance., • Use general measuring instruments, such as indicator, calipers, and height gages., • Rotate from one job to another if needed., • Maintain accurate documentation., • Follows all established company policies, • Follows all established safety procedures and precautions. Including filing incident/accident reports., • Notifies Supervisor of all unsafe/hazardous conditions or defective equipment., • High School Diploma/GED, • Be able to follow written and oral instructions., • Previous employed in a production environment helpful., • Able to communicate., • Math aptitude., • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could work in areas with excessive noise. NOTE: Ear protection available., • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work. A Shift: Mon-Thurs: 5:30am-3:00pm Fri: 5:30am-9:30am #ROC Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran A Shift: Mon-Thurs: 5:30am-3:00pm Fri: 5:30am-9:30am

Job DescriptionOverview Join our dynamic team in Rochester, NY, as an Electromechanical Assembler! In this role, you will play a crucial part in the assembly and testing of electromechanical systems, contributing to innovative projects that make a difference. We’re looking for someone who is detail-oriented, enjoys hands-on work, and thrives in a collaborative environment. If you have a passion for technology and assembly, we want to hear from you! Yoh is hiring Electro-Mechanical Assemblers for a contract opportunity with our client L3Harris located in Henrietta, NY. Payrate $17.50 - $21.25 Job Summary:We are seeking a skilled Electro-Mechanical Assembler to perform a variety of assembly operations, including both manual and automated tasks. The role involves interpreting technical specifications and documents, and following established methods for wiring, component installation, hand soldering, and cable harnessing. Key Responsibilities: • Perform electronic and electro-mechanical assembly operations., • Interpret and comprehend technical specifications, terms, and documents., • Follow methods and sequences for wiring, component installation, hand soldering, and cable harnessing., • Identify and resolve straightforward problems and issues., • Work under general supervision with moderate peer review., • Work on smaller, less structured tasks., • Read and write instructions in English, • High School Diploma or equivalent required., • Minimum of 4 years of relevant experience, or 2 years post-Secondary/associate’s degree with 0 to 2 years of related experience., • Must be able to read and write English/interpret schematics 1st Shift: Monday – Thursday from 5am- 3:30pm@ $17.50 • 2ndShift: Monday – Thursday from 3:30pm – 2am @ $ 19.25 You should be proficient in: $17.50 - $21.25 / hr

Job DescriptionStart Your Career in Manufacturing – Mechanical/Electronic Assembly No Experience Needed! Location: Henrietta, NY Company: Yoh, working with our client L3Harris Type: Contract Estimated Min Rate: $17.50 Estimated Max Rate: $21.88 About the Role Are you ready to learn new skills and help build technology that protects military personnel and first responders? Yoh is hiring Entry-Level Assemblers to work with electronic components at L3Harris in Henrietta, NY. No prior experience required—just bring a strong work ethic, willingness to learn, and reliable transportation. What You’ll Be Doing • Follow engineered assembly processes to maintain consistent quality and productivity., • Perform hand soldering on electronic assemblies and circuit cards., • Complete a wide variety of electronic or electro-mechanical assembly operations on printed circuit boards, sub-assemblies, or end products., • Work under a microscope with small parts., • Stand for the entire shift in a fast-paced environment.What You Need to Bring to the Table, • High School Diploma or GED/HSE (required)., • Reliable transportation (bus lines do not accommodate all shifts)., • Ability to attend a 2-week training program (Mon–Fri, 7:00 AM – 3:30 PM) before starting your shift., • Pass all pre-employment screenings: criminal background, education verification, and drug test.Shifts & Pay, • 1st Shift: Mon–Thu, 5:00 AM – 3:30 PM | $17.50/hr, • 2nd Shift: Mon–Thu, 3:30 PM – 2:00 AM | $19.25/hr Estimated Min Rate: $17.50 Estimated Max Rate: $21.88 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: Company DescriptionFounded in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations. Company Website: in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations.\r\nCompany Website:

Job Description Job Summary: Performs precision and intricate hand and machine assembly of finished product using equipment and methods. Essential Duties and Responsibilities: • Assembles complex components and inspects connections for correct tolerance and fit., • Fasten parts and subassemblies per specifications provided by customer., • Operates various assembly and packaging equipment including lathes, mills, sonic welders, hot stamper, heat stakers, auto baggers., • Will read and interpret customer prints and specifications., • Performs various types of machine and manual assembly., • Identifies and resolves assembly and packaging issues and notifies Floor Lead/Supervisor., • Inspects assembled parts for any imperfections as per customer specifications, may include software test., • When requested, may work on special projects and various related assignments., • May be required to compile various reports and data tracking., • May be required to work in various areas of operations when necessary. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee must have excellent hand/eye coordination, and able to handle a variety of size pieces. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • High school diploma or GED required, • Minimum 2 years experience in small parts assembly or equivalent job experience, • Ability to read and interpret blueprints, • Familiar with various trade tools, • Attention to detail, • Math skills, • Work independently with minimal supervision Syntec Optics is an Equal Opportunity/Affirmative Action Employer. Applicants are free to apply without regard to race, color, religion, sex/gender, gender identity, sexual orientation, marital status, pregnancy, genetic information, citizenship status, national origin, age, disability or veteran status or any other Federal or State legally protected classes. Read our EOE Policy Statement.

Job DescriptionStart Your Career in Manufacturing by doing Mechanical/Electronic Assembly. No Experience Needed! Location: Henrietta, NY Company: Yoh, working with our client L3Harris Type: Contract Estimated Min Rate: $17.50 Estimated Max Rate: $21.88 Are you ready to learn new skills and build technology that helps protect military personnel and first responders? Yoh is hiring entry-level Assemblers to work with electronic components at L3Harris in Henrietta, NY. No prior experience is required but you must have a strong work ethic, a willingness to learn and reliable transportation. What You’ll Be Doing: • As an assembler you will follow engineered assembly processes and maintain consistent quality and productivity levels. Perform hand soldering on electronic assemblies and circuit cards, • Perform a wide variety of electronic or electro-mechanical assembly operations on printed circuit boards, sub-assemblies, or end products. Working under microscope., • All Assemblers will need to attend a 2-week training program Monday – Friday from 7am-3:30pm before starting on their predetermined shift., • Proof of HS Diploma or GED/HSE, • Must have reliable transportation. Bus lines do not accommodate all shifts., • All offers are contingent to passing all pre-employment screenings criminal, education & drug., • 1st Shift: Monday – Thursday from 5am- 3:30pm@ $17.50, • 2nd Shift: Monday – Thursday from 3:30pm – 2am @ $ 19.25 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: Company DescriptionFounded in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations. Company Website: in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations.\r\nCompany Website:

Job Description Title Assembler - B Shift Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary An RPO Assembler will be responsible for producing high precision assemblies or components with strict adherence to established work instructions and specification sheets. The job requires a very high level of concentration and fine detail, along with the ability to maintain consistent process proven by frequent in process inspection. In addition to processing parts, an assembler will perform testing using various optical test equipment and will also maintain all required build records. This role will be performed in a class 10,000 clean room. You Will: • Use tools and equipment to produce high precision assemblies or components and meet daily production targets, • May require the use of test equipment to measurements of completed work and work in process, • Weight, properly label and transfer chemicals and adhesives for use in assembly, • Communicate with lead, supervisor or area manager about any issues or problems in production immediately, • Process parts or components on jobs in que 100% of your available time, • Ensure that all required data entry is occurring for each job and that all required information is being accurately entered, • Adhere to check good pass good inspection criteria and in process inspection for all jobs, this includes daily calibration and expiration checks for all areas work is to be done., • Strict adherence to trained process / work instruction and ownership of communicating any inconsistencies, questions or issues, • Clean and maintain tooling, machinery and work area daily, • Follow all company safety precautions, policies and procedures. You Have: • Minimum of 2 years’ experience in a fast-paced, production/manufacturing environment related to precision assembly or equivalent work experience desired, • Optical Assembly experience a plus!, • GED or High School diploma – prefer vocational education, • Familiarity with computers to include but not limited to Microsoft Office, • Proficient math skills, • Ability to follow, repeat and adhere to detailed instructions while maintaining an attention to detail, • Ability to work in a challenging, fast paced and high-stress environment, • Good mental dexterity and visual acuity, • Excellent communication skills, • Can maintain clean environment and works to maintain the environment as such., • Good time management skills You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, reach with hands and arms and to use hands and fingers to handle, maneuver parts, • The employee frequently is required to stand, walk, stoop, kneel, crouch, talk and hear, • The job may involve prolong periods of sitting/standing, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp, • The employee is frequently required to use the computer, • The job may require regular lifting of up to 50 lbs., • Job requires flexibility in schedule and potential overtime or weekend work Work Environment: • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as needs require Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift Monday-Friday 2pm-10:30pm All B shift employee's will train on A shift for 2-4 weeks before transitioning to a B shift schedule. Training Schedule: 6am - 2:30pm

Job Description Elmira Stamping & Manufacturing-North is currently seeking an Assembler to join our team. As an Assembler, you will play a crucial role in maintaining safety, quality, and productivity through a hands-on approach. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: Elmira Stamping & Manufacturing has specialized in medium- to high-volume contract metal stamping, progressive die stamping, and CNC machining since 1970. Elmira Stamping & Manufacturing specializes in both deep-draw and progressive die stamping. We are equipped with man servo, high-speed, mechanical, and hydraulic stamping presses ranging from 30 to 400 tons. Our machines are optimized for automation with in-die contact and non-contact sensors. We are also experts in secondary put-and-take operations for parts that cannot be completed in a progressive die. Additionally, we have multiple 5-axis Emmegi XT extrusion milling centers with a bed capacity of 30 feet, plus turrets, lasers, and more. The foundation for everything we do and make at Elmira Stamping is an unwavering commitment to quality and customer satisfaction! Position Overview • Seamlessly follow instructions and procedures to ensure efficient assembly processes., • Maintain accurate records of production quantities to track progress and ensure consistency., • Conduct thorough quality checks to guarantee the highest standard of output., • Proficiency with basic hand tools., • Ability to interpret and comprehend blueprints and drawings with ease., • Demonstrate independence and self-motivation in a team-oriented environment., • Comfortably work with metric measurements, ensuring precision and accuracy., • Ability to work in a fast-paced environment., • Wage, • This role is based in the State of New York which requires the disclosure of salary ranges. The expected salary range for this position is $18.00 - $20.00 per hour. Elmira Stamping & Manufacturing provides salary ranges as a good faith estimate of what the company reasonably expects to pay for the position at the time of posting. Compensation offered to a selected candidate may vary based on factors such as (but not limited to) a candidate's job-related qualifications, skills, competencies, experience, and geographic location. The expected salary range for this position is subject to change and may be modified in the future., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance

Job DescriptionDescription: Responsible for assembly of small or medium sized parts. Fitting and/or adjustment of interrelated parts and/or assembly. Adjustment and repair of subassemblies and major assemblies May involve mechanical, optical, and electrical/electronic operations. Responsible for inspection of own work and work of others. Utilize process detail, prints, bills of material, and cut lists to produce quality product. Maintain a safe and clean work environment. Requirements: HS Diploma Requires use of wide range of hand and power tools, electrical or mechanical fixtures, standard measuring devices such as rulers and tape measures, drills, jigs, fixtures, and light materials. Ability to correct documentation when needed. Coordinate with engineering and purchasing when necessary. Incoming and Outgoing Inspections