Assembler jobs in Tulsa, OklahomaCreate job alerts

ESSENTIAL DUTIES AND RESPONSIBILITIES: • Assembles component parts using a variety of hand tools., • Pin obsidian plug to ensure components are aligned and in place., • Pill slips for assembly., • Final trim if needed., • Maintains a clean work area., • Perform work safely., • Perform other duties as assigned by supervisor., • Record time in Mercury., • Perform all tasks as required of a Safety Sensitive position. OTHER DUTIES AND RESPONSIBILITIES: • Work as a team to meet daily goals, • Collaborate with co-workers to problem solve QUALIFICATION REQUIREMENTS: • Basic math skills, • Familiar with hand tools, bench equipment, • Basic verbal and written communication skills, • Reading comprehension skills, • Ability to work independently or in a team environment, • Able to exercise good judgement, • Ability to contribute towards the success of a team PHYSICAL REQUIREMENTS • Moderate physical effort required., • Frequent standing, • Prolonged sitting, • Repetitive motion of finger, wrist, elbow, shoulder or neck movement, • Frequent use of finger tips, • Lifting up to 20 pounds from floor to waist, • Ability to speak clearly, • Reaching/lifting while holding objects weighing up to 20 pounds, • Seeing to visually inspect, measure/assemble at a close distance WORK ENVIRONMENT/ENVIRONMENTAL CONDITIONS: • Inside manufacturing facility in a climate controlled environment, • Occasional exposure to hazardous chemicals, fumes and gases, • High noise level SAFETY SENSITIVE POSITION: • This position is designated as a Safety Sensitive Position as defined by the Oklahoma Medical Marijuana and Patient Protection Act. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionProduction Assembler – Stud Welding & Plate Inspection 🕒 Shifts Available • 1st Shift: 6:00 AM – 2:30 PM, • 3rd Shift: 9:00 PM – 5:30 AM (shift differential) 🏭 Environment: Climate‑controlled Location: Tulsa, OK Pay: $18-$19/hr Responsibilities • Perform stud welding using a stud weld gun, • Inspect plates for defects & quality standards, • Read blueprints & specifications, • Use tape measures & hand tools for assembly, • Move materials using air crane / material handling equipment, • Track production using basic computer systems, • Maintain a clean, safe work areaRequirements, • Experience in manufacturing or production, • Ability to read blueprints, • Strong attention to detail & quality control, • Basic computer skills, • Good mechanical aptitude, • Ability to lift up to 50 lbsPreferred, • Mechanical assembly experience, • Experience with stud welding, • Familiarity with cranes or HMIs, • Experience with hand tools & measuring devicesWhy Join?, • Climate‑controlled facility, • Full benefits package, • Stable shifts with work-life balance, • Opportunity to grow production & welding skills 👉 Apply today! Job Type & Location This is a Contract to Hire position based out of Tulsa, OK. Pay and Benefits The pay range for this position is $18.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tulsa,OK. Application Deadline This position is anticipated to close on Jun 15, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description At Muncie Power, our products play a critical role in our society by powering the vehicles that develop key infrastructure, putting out dangerous fires, fixing the power lines that power our homes, and hauling away our garbage. Every team member at Muncie Power understands how important the success of our customers is to their communities. And that inherent value is carried throughout each team to ensure we’re providing the best for our customers. WHAT YOU’LL DO You will perform a variety of mechanical production assembly work to construct, package, or repair all types of clutch shift (CS) PTOs. Adjusts work-orders, maintains inventory accuracy in the area, monitors work orders for accuracy, and ensures area is kept clean and organized. Assists in distribution as needed to pull material. • Perform assembly and sub-assembly work using basic hand tools, • Interpret blueprints to construct products, • Maintain daily assembly requirements, • Perform final product testing, • Lift and move light weight to heavy weight objects, • Keep work area clean and orderly, • Perform other duties as assigned by the distribution manager and/or lead, • Must be able to secure and retain a forklift license YOUR EXPERIENCES & SKILLS • Assembly experience in a manufacturing environment preferred, • Good mechanical aptitude, • Ability to use basic hand tools, • Knowledge of metric dimensions, • Ability to communicate effectively, both orally and in writing, • Self-motivated with a strong desire to succeed, • Flexibility to effectively adapt to changing conditions and job assignments, • Ability to work well with others BENEFITS • Medical, dental, and vision insurance, and zero card, • Life, death, dismemberment, and dependent insurances, • Prescription drug programs, • Telehealth, • Short-term and long-term disability, and flexible leaves of absence, • Employee assistance programs, • 401k (match 50% on the first 6% of deferred compensation) and flexible spending plans, • 3 weeks of paid time off, • 9 paid holidays, • Wellness & Engagement LOCATION: Tulsa, Oklahoma DEPARTMENT: Assembly WORK ENVIRONMENT: Mfg./Warehouse REPORTS TO: Assistant Assembly Manger SHIFT TYPE: Monday–Friday (5-8s) WORKPLACE ARRANGEMENT: On-site SUPERVISES: N/A SALARY GRADE: 11 To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. This description is intended to describe the general content of and requirements for the performance of this position. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Muncie Power Products is an Equal Opportunity Employer.

Job DescriptionNOW HIRING: Mechanical Assembler | Oil & Gas Industry | $17–$22/hr We are seeking a skilled Mechanical Assembler to support final assembly and hydrostatic testing of equipment used in the oil & gas industry. Position Overview This hands-on role involves assembling, testing, and inspecting equipment such as valves, pipelines, and related mechanical components to ensure quality, safety, and performance standards are met before release. This is a great opportunity for someone with industrial assembly experience who enjoys precision, troubleshooting, and hands-on work. Key Responsibilities • Perform final assembly of valves, pipelines, and related oil & gas equipment, • Conduct hydrostatic testing to verify product integrity and performance, • Read and interpret engineering drawings, schematics, and specifications, • Inspect components for defects and ensure compliance with quality standards, • Follow all safety procedures while supporting production and team goalsQualifications, • Previous experience in mechanical assembly or industrial manufacturing, • Ability to read and interpret engineering drawings and schematics, • Experience with hydrostatic testing or pressure testing preferred, • Strong attention to detail with a safety-focused mindset, • Oil & gas, valve, or industrial equipment experience is a plus Pay: $17–$22/hr (based on experience)

Job DescriptionCompany Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Work manufacturing stations to build product using shop packets, drawings and standard or verbal instructions. Work alongside other assemblers to train and assist. • Review work orders for special instructions, quantities & part numbers. Review parts provided to ensure that they conform to the job requirements., • Assembly experience in "made to order" products (not in an Assembly Line environment)., • Assemble, test and visually inspect products or sub-assemblies including those of Assembler II and Nitrogen Booster Systems, Plan 53B’s, standard lubrication systems as well as more complex standard Gas Control Panels., • Ensure assembled parts meet the drawing specifications for dimensions and level tolerances., • Perform assembly support functions - Sandblast, Strip, Dye Penetrant test, Hydrotest and PMI., • Strongly prefers previous experience with multi-plane tube bending and installation., • Adhere to Material Traceability requirements., • Paint systems as business requires., • Label parts and install nameplates., • Conduct peer reviews of completed assemblies., • Make proper labor and time reports., • Work in a clean and orderly fashion to maintain area standards of 5S., • Participate in Lean/Continuous Improvement initiatives., • Perform other duties as assigned.Qualifications, • High school diploma or general education degree (GED)., • Ability to read and interpret average assembly drawings, make calculations and resolve elementary technical problems., • 3 year of related experience required., • Stainless steel manual tube bending experience required., • Must be able to learn to operate overhead cranes., • Must be able to stand for extend periods of time; a minimum of 2 hours., • Must be able to maneuver to all areas of the office, shop, or warehouse., • Must be able to lift and carry up to 35 pounds or utilize team-lift or lifting assistance for items over 35 pounds. Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERG's) to provide a safe space for employees to connect and support each other. Our cross-business ERG's include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. #ZR We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job DescriptionMidtown Tulsa Shop seeking a Wiring Harness AssemblerJob SummaryThe Assembler II is responsible for constructing prototype and limited production wiring harnesses. This position requires the ability to read and interpret wiring schematics, perform precise electrical connections, and ensure all work meets established quality and safety standards. The ideal candidate is detail-oriented, dependable, and experienced with hand tools and basic electrical wiring. Essential Duties and Responsibilities • Construct wiring harnesses for prototypes and limited production applications., • Read, interpret, and follow wiring schematics, blueprints, diagrams, engineering drawings, bills of material, and assembly instructions to accurately assemble products., • Understand how wiring harnesses integrate with overall system operations., • Make proper electrical connections and select appropriate connectors and components., • Perform quality checks to ensure products meet required standards., • Accurately distinguish wire colors and follow detailed assembly procedures., • Use hand tools safely and effectively during the assembly process., • Maintain clear communication with team members and supervisors through both written and verbal channels., • Adhere to all safety procedures and wear required personal protective equipment (PPE)., • Maintain a clean and organized work environment., • Perform other related duties as requested or assigned. Qualifications and Requirements • High school diploma or GED required., • Mechanical and/or wiring knowledge is required., • Ability to read and interpret technical instructions, wiring diagrams, blueprints, and manuals., • Strong organizational skills and the ability to multitask effectively., • Previous experience working with or assembling wiring harnesses preferred., • Experience using hand tools required., • Reliable, detail-oriented, and professional demeanor., • Ability to stand for extended periods and perform physical tasks including reaching, bending, climbing, lifting up to 50 lbs, fine finger manipulation, gripping, and squeezing. Training Requirements • General Safety, • Harassment Prevention, • Quality System Awareness, • ISO Standards, • Ethics and Workplace Conduct Work Environment • Warehouse or production environment., • May involve exposure to odors, noise, dust, heat, cold, or chemicals., • Appropriate PPE, including eye protection (goggles, face shields, or safety glasses), must be worn at all times. Schedule - Monday through Friday, 8:00 AM to 5:00 PM, with overtime as required. Pay – DOE $20-23/hr Abundant Solutions5151 S Mingo RdSuite DTulsa OK 74146Send resumes to Ashley@abundantjobs.com

Job Description Many employers offer jobs; at Boise Cascade, we offer career opportunities. We are one of the largest manufacturers of plywood and engineered wood products in North America and the only wholesale stocking distributor for building products that can service the entire United States. Our broad national footprint provides opportunities in many career fields including sales, technical design/drafting, engineering, maintenance, I/T, administrative, production, warehousing, distribution and CDL truck driving. We’re invested in cultivating a respectful workplace culture that attracts, connects, grows, and retains a talented workforce – one where everyone feels seen, heard, and valued. Our people-centered approach to associate experience and engagement is rooted in our Core Values. Boise Cascade has an exciting opening for a Millwork Assembler. Please review the responsibilities and needed qualifications below and apply today! Key Responsibilities: • Performs assembly of interior and exterior doors, • Work at various machine centers as needed, • Verify accuracy of work orders to materials and assembly instructions, • Provide basic customer service to internal and external customers, • Inspects all materials for defects and appropriate quality/condition, • Work with other team members to fulfill orders and complete tasks daily, • Maintain clean working area, • Follow all safety procedures (OSHA compliance), • Engages in all required safety programs, • Perform additional duties as assigned Requirements Basic • High school diploma, GED, or 2+ years equivalent experience, • Able to understand and follow safety/work instructions, • Ability to read tape measurements Preferred • Familiarity with millwork, • Experience utilizing an inventory control scanner (RFN), • Prior experience with manufacturing equipment such as CNC machines Physical • Ability to stand during the entire work shift, • Work in tandem using safe lifting practices, • Continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Work Environment • Repetitive physical motion, • High traffic warehouse and shop, • Work in a loud environment and wear the provided personal protective equipment. The ideal candidate will uphold our core values of Integrity, Safety, Respect, and Excellence, and consistently demonstrate strong teamwork skills that contribute positively to the team environment. Ensamblador de carpintería Responsabilidades principales • Ensamblar puertas para interiores y exteriores., • Trabajar en centros de maquinado diferentes, según sea necesario., • Verificar que las órdenes de trabajo sean precisas en cuanto a materiales e instrucciones de ensamblado., • Proveer servicio al cliente básico para clientes internos y externos., • Inspeccionar todos los materiales para detectar defectos y que tengan la calidad/condición adecuada., • Trabajar con otros integrantes del equipo para procesar pedidos y completar tareas a diario., • Mantener limpia la zona de trabajo., • Seguir todos los procedimientos de seguridad (cumplimiento según la OSHA)., • Participar en todos los programas de seguridad requeridos., • Realizar las tareas adicionales que se le asignen. Requisitos Básicos: • Diploma de secundaria, preparatoria equivalente (GED) o 2 o más años de experiencia equivalente., • Capacidad para entender y seguir instrucciones de seguridad/del trabajo., • Capacidad para leer medidas con cinta métrica. Deseables: • Familiaridad con la industria de la carpintería., • Experiencia en el uso de escáner de control de inventario (RFN)., • Experiencia previa con equipo de producción como máquinas de CNC. Físicos: • Capacidad para estar parado durante toda la jornada de trabajo., • Realizar trabajo en conjunto utilizando practicas de levantamiento seguras., • Levantar y/o mover continuamente hasta 11 kilos (25 libras), levantar y/o mover frecuentemente hasta 23 kilos (50 libras) y levantar y/o mover ocasionalmente hasta 45 kilos (100 libras). Condiciones de trabajo • Movimientos físicos repetitivos., • Almacén y taller de mucho tráfico., • Trabajar en un ambiente ruidoso y usar el equipo de protección personal proporcionado. El candidato ideal actuará conforme a nuestros valores esenciales de integridad, seguridad, respeto y excelencia, además de dar muestra constante de sólidas habilidades de trabajo en equipo que contribuyan positivamente con el ambiente del equipo. About Boise Cascade Boise Cascade has been in the business of manufacturing wood products and distributing building materials for over half a century. Today we're one of the largest manufacturers of plywood and engineered wood products in North America – and the only wholesale stocking distributor for building products that can service the entire United States. Because our business is built on relationships, our associates are critical to our success. And we're committed to investing in them. That's why we offer a comprehensive benefits package designed to have a positive impact on all areas of your life – from health and well-being, career and community, to financial security and personal safety, with many benefits beginning on your first day of employment. We call it, Total Rewards. Here's a snapshot of what we offer: Our Benefits • Medical + Prescription Drug, • Dental + Vision, • Flexible Spending Accounts (Healthcare + Dependent Care), • 401(k) Retirement Savings with company contribution, • Paid Time Off (20 days per year), • Paid Holidays (10 per year), • Paid Parental Leave (6 weeks), • Life Insurance

Job DescriptionJob Summary RPM Builds is looking for a skilled Bolted Tank/Silo Assembler to join our team. As a Bolted Tank/Silo Assembler, you will be responsible for the construction and assembly of bolted tanks and silos used in various industries. Your primary goal will be to ensure the efficient and accurate assembly of these structures, following safety protocols and quality standards. This role requires a strong attention to detail, technical proficiency, and the ability to work effectively as part of a team. Candidates must be willing to travel the country for up to (8) weeks at a time working (6) 10-hour days. Hotel and travel is provided by company along with daily per diem. Key Responsibilities: • Assemble bolted tanks and silos using hand and power tools, ensuring precision and accuracy., • Install and tighten bolts and fasteners according to specifications and torque requirements., • Collaborate with team members to plan and coordinate assembly projects., • Adhere to safety procedures and guidelines at all times to maintain a safe working environment., • Maintain a clean and organized work area, ensuring tools and equipment are properly stored., • Assist with the disassembly and relocation of tanks and silos as required. The RPM Builds team is a motivated, growing group of installers that is looking for individuals to build into the next company foreman. There are no time restrictions for advancing in our company, and we love investing in employees that want to learn the trade and advance in the company and compensation. Experience not required. Check out what we build at www.rpmbuilds.com. E04JI800sfaa403arwf

Job DescriptionMidtown Tulsa Shop Seeking a Power Generation Assembler Job SummaryWe are seeking a skilled Assembler II to join a Power Generation assembly team. The ideal candidate has a strong background in generator assembly, instrumentation, and control panels, with familiarity in internal combustion engines and natural gas–fired engine systems. This role involves assembling genset packages, performing electro-mechanical work, and working from complex documentation to produce high-quality, precise assemblies. Essential Duties and Responsibilities • Assemble genset packages according to standard procedures and manufacturing documentation., • Perform complex and precise electro-mechanical assembly work., • Utilize a variety of hand tools, precision measuring instruments, and machinery used in structural and engine assembly., • Work from detailed manufacturing documentation, blueprints, and/or verbal and written instructions., • Follow production schedules and complete tasks within standard times., • Maintain a clean and organized work area., • Perform other related duties as assigned. Education and Experience • High school diploma or equivalent required., • Proficiency in instrumentation and control panel assembly preferred., • Knowledge of internal combustion engines or generators preferred., • Experience with natural gas–fired engines and related systems is a plus., • Familiarity with electrical and instrumentation (I&E) work is beneficial., • Ability to read and follow complex manufacturing documentation and instructions. Job Knowledge, Skills, and Abilities • High mechanical aptitude and basic electrical/instrumentation knowledge., • Vocational or high school training in automotive mechanics helpful but not required., • Proficient in the use of mechanic hand tools and power hoists., • Ability to read precision measuring instruments, instruction manuals, and assembly drawings accurately. Physical Requirements • Regularly required to stand, walk, bend, reach, grip, squeeze, and lift up to 50 lbs., • Fine finger manipulation and use of hand tools required. Personal Protective Equipment • Eye protection (goggles, face shield, or safety glasses) required., • Steel toe safety shoes/boots required. Work Environment • Warehouse or production environment., • Exposure to elements such as noise, dust, heat, cold, odors, or chemicals may occur. Schedule: Monday–Friday, 7:00 AM – 3:30 PM (Overtime as needed) Pay: DOE Abundant Solutions5151 S Mingo RdSuite DTulsa OK 74146Send resumes to ashley@abundantjobs.com

Job Description Join a Team That Builds Quality Products Lloyd Richards Personnel is currently seeking experienced Mechanical Assemblers for several of our valued manufacturing partners throughout the Tulsa area. This is an excellent opportunity for mechanically inclined individuals who enjoy working with their hands, reading blueprints, and assembling high-quality products in a fast-paced manufacturing environment. If you have experience working with hand tools, mechanical components, production equipment, and assembly processes, we want to hear from you. Mechanical Assemblers play a critical role in the manufacturing process by assembling components, ensuring product quality, and supporting production goals while maintaining the highest standards of safety and workmanship. Responsibilities • Assemble mechanical components and equipment according to blueprints, schematics, work instructions, and engineering specifications., • Utilize hand tools, power tools, drills, wrenches, calipers, micrometers, and other assembly equipment to complete production tasks., • Install and assemble tubes, bundles, and mechanical assemblies as required., • Inspect assembled products to ensure compliance with quality standards and customer specifications., • Read and interpret blueprints, drawings, and technical documentation., • Troubleshoot assembly issues and communicate concerns to supervisors and production teams., • Operate forklifts, overhead cranes, and material handling equipment as needed., • Assist with fabrication, machining, welding, or production support activities when required., • Maintain accurate production records and documentation., • Follow all company safety policies, procedures, and quality standards., • Maintain a clean, organized, and safe work environment., • Collaborate with production, fabrication, and quality teams to meet manufacturing schedules and customer requirements. Qualifications • Previous mechanical assembly experience in a manufacturing environment preferred., • Strong mechanical aptitude and ability to work with hand and power tools., • Ability to read and interpret blueprints, schematics, and assembly drawings., • Experience using measuring tools such as calipers, micrometers, and tape measures., • Strong attention to detail and commitment to quality workmanship., • Ability to follow directions and work effectively in a team-oriented environment., • Excellent communication and problem-solving skills., • Reliable transportation and consistent attendance., • Commitment to workplace safety and continuous improvement. Preferred Experience • Manufacturing or industrial assembly experience., • Air cooled heat exchanger assembly., • Shell and tube assembly., • Skid assembly., • Forklift and overhead crane operation., • Welding, fabrication, or machining experience., • Bilingual communication skills. Physical Requirements • Ability to stand, walk, bend, kneel, stoop, push, and pull throughout the shift., • Ability to lift up to 50 pounds regularly., • Ability to work in a non-climate-controlled manufacturing environment., • Ability to safely work around forklifts, cranes, fabrication equipment, and industrial machinery., • Ability to perform physically demanding work while maintaining quality and safety standards. Why Join Our Team? • Competitive compensation based on experience., • First and second shift opportunities available., • Overtime opportunities available., • Stable, long-term employment opportunities., • Opportunity to develop valuable manufacturing and technical skills., • Career growth opportunities within assembly, fabrication, machining, and production operations., • Supportive work environment focused on safety, quality, and employee success., • Work with respected manufacturing companies throughout the Tulsa area. Ready to Get Started? Apply today through Lloyd Richards Personnel and take the next step in your manufacturing career. We are looking for dependable professionals who are ready to contribute, grow, and help build quality products for industry-leading manufacturers. Lloyd Richards Personnel 4619 S. Harvard Ave., Suite 105 Tulsa, OK 74135 918-742-5300 Apply today and start building your future with a team that values craftsmanship, teamwork, safety, and dedication.

Job DescriptionOilfield Equipment Assembler Pay Rate: • $18.00-24.00/hrOilfield Equipment Assembler Summary: Assembles or fabricates mechanical parts in a manufacturing setting, while paying close attention to detail. Requires basic technical knowledge, manual dexterity and the ability to perform repetitive tasks. Oilfield Equipment Assembler Duties and Responsibilities: • Engine dress, i.e. alternator, intake manifold, and starters., • Follow torque specifications., • Install components using current assembly practices., • Mark each component as it’s installed., • Mark build sheet as each portion is completed., • Follow instructions by part number and description., • Any other duties that may be assigned by management.Oilfield Equipment Assembler Initiative:, • Assemble and fabricate equipment according to Company standards., • Promote operations in a safe, efficient and professional manner., • Comply with Company safety training and procedures.Oilfield Equipment Assembler Physical Demands:, • Ability to frequently lift up to 50 lbs. Able to lift 65 lbs from floor to shoulder level occasionally., • Ability to occasionally lift, carry, push or pull up to 100 lbs., • Requires frequent bending, stooping, kneeling, crouching, crawling, climbing, balancing, lifting, carrying, and reaching or handling with arms, hands and fingers., • Also crawling and working in narrow spaces., • Requires frequent repetitive movements, i.e. hammering, turning wrenches, or used screwdrivers., • Manual dexterity sufficient to work with fingers., • Normal vision with or without corrective lenses., • Exposed to cold, heat, noise mechanical/electrical fume or odor., • Will be required on occasion to work more than 8 hours on one shift Key Personnel BenefitsWhile on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, accident, critical illness, term life, short-term disability, PTO, and more!Only qualified applicants will be contacted to make the best use of your time. Apply online at www.keyjobs.com today!Our office is at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I-9 form between the hours of 8 am to 3 pm, Monday through Friday.Key Personnel is an Equal Opportunity Employer.

Job DescriptionAssemblerEmployment Type: Full-Time | HourlyLocation: Tulsa and surrounding AreasPay: $17/hr. - $21/hr. DOEAbout the JobWe need assemblers to help build products for multiple companies. This is a great first job or career starter — no experience needed. Manufacturing experience is a plus. We’ll train you on everything you need to know. If you show up on time, work hard, and pay attention to detail, you’ll do well here.What You’ll Do • Put together parts and products by following simple instructions, • Use basic hand tools (we’ll show you how), • Check your work to make sure it looks right, • Let your supervisor know if something seems off, • Keep your work area clean and safe, • Work as part of a teamWhat We’re Looking For, • A good attitude and willingness to learn, • Showing up on time and ready to work, • Able to follow instructions, • Able to use your hands and pay attention to small details, • GED or diploma preferred, • Manufacturing experience a plusPhysical Requirements, • Standing for most of your shift, • Ability to lift 25lbs to 50lbs, • Doing the same hand movements throughout the daySchedules, • 1st and 2nd shifts are available, • Overtime sometimes requiredKey Personnel BenefitsWhile on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more! Ready to start? Apply today!In order to make the best use of your time, you will receive a phone interview. Key Personnel is an Equal Opportunity Employer. #INDLI26

Job Description TAT-Technologies Tulsa Site is recognized as a world leader in the Aerospace Industry. As the premier choice for Heat Transfer manufacturing and maintenance, repair and overhaul (MRO) solutions, TAT provides high-value alternatives to Commercial, Regional, and Rotary Aircraft customers worldwide. TAT Technologies is also a premier partner in the Defense Industry. As the preferred choice for Heat Transfer original equipment manufacturing (OEM) and maintenance, repair and overhaul (MRO), TAT Technologies affords the best-value solutions for our Military customers globally. TAT-Technologies Tulsa Site is looking for Assemblers for our OEM core production. You will build cores by reading instructions represented in manuals, drawings, schematics etc., ensuring all parts fit correctly and are suitable for the final product. You will use your hands and hand tools to delicately build the cores with great precision. After assembly, the ability to align, straighten, and press the cores in a fixture in preparation for braze. Assembly will be in a clean room environment requiring gloves. This job requires repetitive, daily functions. Responsibilities • Use a variety of basic hand tools, • Ability to read blueprints, process sheets, assembly and schematic drawings, • Read and comprehend instructions and follow standard operating procedures (SOP), • Use micrometer, caliper, tape measure, and other measuring devises, • Assembly and adjustment of delicate piece parts to produce quality cores that meet all standards, • Examine parts and cores for any defects and report any defects to supervisor, • Other duties as assigned Requirements • High school diploma or equivalent, • Must have strong attention to detail, • Must be able to work 1st shift hours typically 6:30am to 3pm with overtime and weekends as business need demands, • Must be able to accomplish any and all duties with little or no assistance following new employee training, • Must be able to read or learn to read blueprints, • Mechanical ability with proven experience as assembler, preferred, • Maintain high level of focus for long periods of time, • Being a team player is essential since all tasks will require close collaboration with co-workers, • Must be able to perform physical requirements: ability to stand for 8 hours or more and lift up to 50 pounds, • Must have reliable transportation, • Must have the ability to pass pre-hire and ongoing, random drug testing as required as a Department of Transportation (DOT) facility regulated by the Federal Aviation Administration (FAA), • Must have the ability to pass pre-hire background check screening Benefits TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company match, Short Term Disability (STD), Long-Term Disability (LTD), accidental coverages, Employee Assistance Programs (EAP), and more. Insurance carriers vary based on location. Equal Employment Opportunities (EEO) – TAT Technologies is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran.

Job Description Manufacturing Assembler 3:30pm-12:00am Mon-Fri $19-$22 per hour Jenks, Ok The Assembler position performs aerospace component assembly utilizing various equipment. I.ESolder Station, Epoxy applicators, Mechanical/Hydraulic press and basic hand tools. Essential Duties and Responsibilities include: • Assembles various components in accordance with applicable work instruction., • Performs soldering and epoxy adhesion., • Works to approved documentation such as assembly prints, Standard Operation Procedures (SOP) and Work Instructions (WI)., • Use of shop tools and various other shop equipment., • Document traceability of components/consumables used in assembly on manufacturing orders., • Provides feedback to Production Supervisor regarding problems and issues involved in assembly of products or documentation, • Adheres to company procedures and policies regarding personnel and quality issues., • Other duties as assigned. Requirements Education: High School Diploma or equivalent Work Experience: • Preferred work experience in manufacturing process., • Hands on production using small hand tools and shop equipment., • Mechanically inclined and detail oriented., • Ability to interpret specifications and drawings Specialized Knowledge or Abilities: Language: Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to communicate orally and in writing. Mathematical Skills: Basic math skills Reasoning Abilities: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Physical Demands: #MED While performing the duties of this job, the Team Member is regularly required to stand; walk; bend, squat, use hands to finger, handle or feel, reach with hands and arms and talk or hear. The team member may occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Assembly procedures/techniques are repetitive in nature. • Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, dynamometers, magnetic drums, tape drives, brakes, control linkage, actuators, and appliances., • Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.

Job Description Okie Staffing is looking for a skilled Bench Technician – Electronics Assembler to join a dynamic manufacturing team. This role involves assembling, testing, and troubleshooting electronic components and assemblies to ensure quality and functionality. Key Responsibilities • Assemble electronic components, circuit boards, and wiring harnesses according to schematics and work instructions, • Solder components and make repairs as necessary, • Conduct functionality tests and troubleshoot assembly issues, • Inspect assemblies for quality and compliance with specifications, • Maintain an organized workbench and document assembly processes, • Follow all safety guidelines and proper handling of electronic parts Requirements • High School Diploma or equivalent required, • Experience with electronic assembly, soldering, and wiring preferred, • Ability to read and interpret wiring diagrams and electronic schematics, • Strong hand-eye coordination and attention to detail, • Basic understanding of electronic components and circuits, • Good manual dexterity and the ability to work with small parts, • Reliable, safety-conscious, and able to work independently or as part of a team Benefits • Temp-to-hire potential based on performance, • $18.00 Plus based on experience hourly, • Consistent daytime schedule, • Opportunity to learn valuable production skills

Job DescriptionRuhrpumpen is an innovative and efficient pump technology company that offers highly-engineered and standard pumping solutions for the oil & gas, power generation, industrial, chemical and water markets. We are searching for an entry-level Assembler to work in our Tulsa Factory. Position Overview The entry-level Assembly position is a foundational manufacturing role designed to train, develop, and prepare employees for promotion into an experienced Pump Assembler. This role focuses on basic mechanical assembly, material preparation, equipment operation, and hands-on skill building under close supervision. The ideal candidate is mechanically inclined, safety-focused, and eager to learn advanced pump assembly skills through structured on-the-job training. Qualifications Mechanical aptitude or experience working with tools in manufacturing, automotive, maintenance, or similar environments preferred. Ability to learn and follow verbal and written work instructions. Willingness to train on forklifts, cranes, rigging, and precision measurement tools. Strong work ethic, reliability, and desire to grow into more advanced assembly roles. Physical Requirements Ability to lift up to 50 lbs safely. Frequent standing, bending, reaching, and manual assembly work. Ability to work in a fast-paced production environment with industrial machinery, noise, and fluids. Powered by JazzHR 72Mmp84vVV

Job Description Allient Inc. is in growth mode and currently seeking Assemblers to join our team in Tulsa, OK! The Assembler will perform all operations required for the manufacture and assembly of small motor components and motion control products and systems. Apply now! Responsibilities: • Work with Supervisor and Managers to coordinate assignments with the production schedule., • Communication to work cell of production goals and assignments., • Ensure proper materials are in place to meet production assignments., • Communicate to other departments regarding production issues and report status., • Loads and unload previously setup machines, to perform fastening, force fitting, or light metal-cutting operation on assembly line., • Oversee daily operations and maintains safe and clean working environment by complying with procedures, rules, and regulations., • Inspects components and assemblies both visually and using inspection tools as required., • Uses prints, job orders, operations methods sheets (OMS), work instructions and other specifications to ensure that proper and within specification materials and tools are utilized., • Inventories (cycle counts) materials in work area., • Prepares required documentation. Minimum Qualifications: • High school education or equivalent., • Must be able to read and interpret drawings, follow routers, use simple math, and use basic hand-held measuring tools., • Good manual dexterity to manipulate small objects., • Ability to read blueprints, calipers, and micrometers. Soldering, lead wiring, and forming experience is a plus. Physical Demands: • Ability to stand for long periods of time with periodic sitting, bending, stooping, and lifting 10 to 30 pounds., • Consistent use of both hands using repetitive motion., • Occasionally, the employee must lift and/or move up to 50 pounds with assistance., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment: • While performing the duties of this job, the employee is regularly exposed to vibration. The employee occasionally works near moving mechanical parts and in high, precarious places and is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually very loud. Apply now! *To learn more about Allient, visit our website at www.Allient.com *Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionCompany Overview: Aquestia USA is a leading provider of fluid management solutions, such as hydraulic control valves and air release valves, serving diverse segments including Waterworks, Fueling, Fire Protection, Wastewater, Mining, and Industrial markets. With a strong commitment to innovation, quality, and customer service, Aquestia delivers advanced technologies that improve system efficiency, reliability, and sustainability for critical infrastructure and fluid control applications worldwide. • Position Overview: The Assembler I assembles valves or valve sub-assemblies, partially or completely. Key Responsibilities:, • In all actions support Aquestia’s quality policies, safety policies and core company values of Fairness, Honesty, and Integrity., • Reads job order to gain a thorough understanding of the current assignment and to identify any non-standard requirements. Positions parts accordingly., • Fastens parts together with bolts, screws, or another fastener., • Removes small quantities of metal with hand files or power sanders to produce close fit between parts., • Operates drills, air powered tools and hoists to assist in the assembly process., • Assures department SOP quality requirements are followed for every order. Maintains quality specifications throughout production runs., • Maintains accurate production records within the ERP reporting system., • Functions in accordance with ISO9001 procedures., • Follows established Lean Manufacturing and 6-S procedures., • Possesses a moderate understanding of general aspects of the job. Works under the close supervision of senior personnel., • All other duties as assigned. Qualifications:, • High School Graduate or General Education Degree (GED)., • One year minimum related experience and/or training or equivalent combination of education and experience, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to carry out instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving variables in standardized situations. Physical Requirements: Ability to stand or sit for extended periods throughout the workday. Ability to bend, stoop, reach, twist, and kneel. Ability to lift, carry, push, and pull materials or equipment up to 40–50 lbs. Ability to use hands and fingers to manage tools, components, and small parts with manual dexterity. Ability to work in environments with varying temperatures, noise levels, and physical activity typical of a production floor. Ability to perform repetitive motions for extended periods without assistance. Ability to wear required personal protective equipment (PPE) such as safety glasses, steel‑toe shoes, or respirators when necessary. Ability to visually inspect materials or products and read displays, labels, or gauges. Company Benefits: • Health, dental, & vision insurance., • Flex Benefit Plan – health and dependent care., • HSA., • Company-paid life insurance. Voluntary-based life insurance., • Company-paid telehealth benefit., • Company-provided Employee Assistance Plan., • 401(k) plan with company match. Fully vested after 31 days of employment., • PTO benefit., • Eleven paid holidays, including employee birthday and anniversary. Aquestia USA is an equal employment opportunity employer. Powered by JazzHR 1zryM9vuKu

Job Description Okie Staffing is seeking a dependable Capstan Hoist Assembler to join a manufacturing team focused on assembling heavy-duty lifting equipment. This position involves assembling components, performing quality checks, and ensuring the finished products meet rigorous safety and performance standards. Location: Tulsa, OK Schedule: Monday – Thursday, 5am to 3pm Day shift Pay: $16.00 – $17.00/hr DOE Key Responsibilities • Assembling capstan hoists and related lifting equipment components according to drawings and specifications, • Using hand tools, power tools, and mechanical equipment assembly techniques, • Performing quality inspections to verify correct assembly and function, • Collaborating with the production team to maintain workflow and meet deadlines, • Maintaining a clean, safe, and organized work area, • Reporting any defects or issues to supervisors promptly Requirements • High School Diploma or GED required, • No experience needed, • Prior mechanical assembly experience preferred, especially with hoists or lifting equipment, • Ability to read and interpret basic technical drawings and assembly instructions, • Strong attention to detail and quality, • Ability to use hand and power tools safely and effectively, • Must be able to lift up to 50 lbs and work on feet for extended periods, • Good communication and teamwork skills Benefits Health Insurance covered 100% by employer (after full-time employment) Steady day shift schedule Shift Monday – Friday 5:00 AM – 3:30 PM Pay $16.00 – $17.00/hr DOE Clean, organized work environment Great opportunity to gain both inventory + assembly experience Ideal for candidates wanting long-term stability

Job Description Electronic Assembler - Aerospace Bench Technician Trinity Employment Professionals - Tulsa, OK Monday - Friday | 7:00am - 3:30pm Pay: $17-19/HR The Bench Technician performs component level troubleshooting and repair of complex aviation electronic and electromechanical components. Essential Duties and Responsibilities include: • Read and understand drawings, prints and schematics., • Test, disassemble, inspect, repair and reassemble aircraft components., • Read and accurately interpret maintenance manuals, service bulletins, wiring, diagrams, schematics diagrams and drawings., • Other duties as assigned. Requirements Education: • High School Diploma or GED Work Experience: • 2 years of experience in the electronic/electromechanical field preferred or graduate of Aviation Technology program., • Technical experience, including reading/interpreting technical data, • Proficient in soldering and board repair and assembly/disassembly of mechanical components, • Familiar with and able to use industry standard test equipment, such as multimeters, oscilloscopes, frequency generators, counters and have the ability to learn the proper applications of specialized test equipment Specialized Knowledge or Abilities: • Language: Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to communicate orally and in writing., • Mathematical Skills: Basic math skills, • Reasoning Abilities: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Physical Demands: While performing the duties of this job, the Team Member is regularly required to stand; walk; bend, squat, use hands to finger, handle or feel, reach with hands and arms and talk or hear.. The team member may occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The noise level in the work environment is usually moderate DOT-FAA Safety Sensitive Position #MED TRINITY EMPLOYMENT SPECIALISTS IS AN EQUAL OPPORTUNITY EMPLOYER See the great things people are saying by checking out our Google reviews, along with our Facebook, LinkedIn, Instagram,X/Twitter. Please visit the Career Center on our website for some helpful resources to help in your job search, to build a resume, forinterview tips and many job opportunities! High School Diploma 2 years experience required • Install, adjust, or maintain mobile electronics communication equipment, including sound, sonar, security, navigation, and surveillance systems on trains, watercraft, or other mobile equipment., • Inspect and test electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices, and computer software., • Reassemble and test equipment after repairs.

Job DescriptionMechanical / Electrical AssemblerLocation: Tulsa, OKSchedule: Full-TimePay: DOEType: Manufacturing / Assembly The Assembler is responsible for transforming materials through manufacturing processes to produce quality products that meet customer requirements. This role involves assembling, testing, repairing, and processing equipment and components while following drawings, work orders, and ISO-certified procedures. Key Responsibilities • Assemble electronic and mechanical components using mechanical drawings, wiring diagrams, and electrical schematics, • Perform numbering, painting, grinding, and deburring operations, • Assemble, test, and process equipment, products, and component parts according to daily schedules using Capacity Management System (CMS) work lists, • Operate a tow motor to move parts and materials, • Disassemble, evaluate, and repair customer equipment returned for service, • Coordinate assembly activities with Quality Control, Production Control, and Engineering to ensure all product requirements are met, • Follow work order routings, blueprints, and ISO-certified procedures, • Perform all job duties safely, maintaining safety as the top priority, • Maintain a clean work area and follow 5S and workplace organization standardsExperience Requirements, • High School Diploma or equivalent required, • 3–5 years of mechanical assembly or manufacturing experience requiredKnowledge, Skills, and Abilities, • Ability to read and interpret drawings, blueprints, and specifications, • Knowledge of overhead crane operation, • Experience using power tools and hand tools, • Familiarity with industrial manufacturing environments, • Knowledge of the TDW product line preferredWork Environment, • Manufacturing and assembly shop environment, • Requires standing, lifting, and hands-on mechanical work, • Use of shop equipment, tools, and material handling equipmentApply with a detailed, updated resume for consideration.Abundant Solutions 5151 S. Mingo Rd., Tulsa, OK 74146 918-749-6999

Job Description Great Company looking for an Electrical Assembler. The Electrical Assembler will be building panel units that are custom designed to be used in the oil field. The rooms are fitted with computers, meters, gauges, fire suppression systems, heat and air, pressure meters, etc. The assembler will wire up the panel boards, switches, gauges, breakers, control panels, etc. Must be able to bend conduit, thread pipe, and wire AC/DC power terminations. • M-F, 6:00am to 3:30pm with OT as needed for big projects., • Climate controlled shop.Company DescriptionWe offer weekly pay & immediate benefits.We offer weekly pay & immediate benefits.

"TWG" is the group name we use to refer to the industry's foremost producers of quality winches, hoists, gear drives and electronic monitoring systems for global industrial applications. The seven brands comprising TWG include Tulsa Winch, Rufnek, Greer, dp Winch, Gear Products, Pullmaster and LANTEC. Operating from the Jenks, Oklahoma facility are the Tulsa Winch, Rufnek, Greer, dp Winch and Gear Products brands with Pullmaster and LANTEC brands operating from the Surrey, British Columbia, Canada. By drawing upon the talent of our dedicated employees and the strengths of these brands, TWG has become known around the world for providing innovative products and solutions designed and manufactured to high quality standards and delivered to our customers on time. The products and solutions produced by TWG find their way into diverse applications including onshore oil and gas, the utility industry, commercial and governmental towing and recovery, construction and offshore cranes, marine applications including fishing and cargo handling, forestry and mining applications and a myriad of other construction applications. We feel that our success is directly attributable to the creativity, commitment and enthusiasm of our employees. This position has manufacturing operation responsibilities for the assembly of TWG products. Essential Responsibilities: • Assemble parts according to Bill of Material, Bill of Operations, engineering drawings and any other related controlled documents., • Operates hydraulic and manual presses to assist in assembly operation., • Performs test procedures on assemblies as directed., • Required to maintain accurate and timely transactions in the ERP system., • Repairs and maintains mechanical equipment., • Be able to drive forklift truck, hand trucks or manually move parts as directed or required., • Complete kitting parts based on production schedule., • May be required to train other employees and help in other departments as directed., • Other essential duties and responsibilities may be assigned as required., • This position is also responsible for, with authority to follow ISO procedures, initiate action to prevent problems, document quality problems, contribute to problem solutions, verify implementation of solutions, control further processing when a problem is identified, protect the environment, including preventing pollution, analyzing or identifying areas for correction or improvement.\nQualifications/Requirements:, • High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience., • Must be able to travel as required and /or directed.Work Arrangement : Onsite We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off; business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact [email protected] for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. Job Function : Manufacturing & Operations Nearest Major Market: Tulsa Nearest Secondary Market: Oklahoma Job Segment: Offshore Oil, Hydraulics, Assembly, Facilities, ERP, Energy, Engineering, Manufacturing, Operations, Technology

Job DescriptionJob Title: Assembler Job Description This role involves assembling stainless steel and copper plate units with a strong focus on quality, accuracy, and safety in a climate-controlled manufacturing environment. You will stack plates, add sockets, verify specifications against blueprints, and use basic computer tools to support production and inventory processes across multiple shifts. Responsibilities • Inspect plates carefully for defects or flaws and ensure all ports and orifices meet required specifications., • Read and interpret blueprints to confirm that assembled units meet design requirements., • Stack stainless steel and copper plates accurately and add sockets to units according to work instructions., • Use basic computer systems to pull blueprints, check inventory, charge off plate packs, and charge units to the production roster., • Operate and interact with HMI (Human-Machine Interface) systems and other production equipment as needed., • Measure components using a tape measure to verify dimensions and tolerances., • Perform mechanical assembly tasks with consistent attention to detail and quality standards., • Lift and move components weighing up to 50 pounds on a regular basis, particularly on L and XL assembly lines., • Follow established safety procedures and maintain a clean and organized work area., • Collaborate with team members and communicate any issues related to quality, inventory, or equipment to supervisors in a timely manner.Essential Skills, • Strong attention to detail with a focus on quality control and defect detection., • Ability to read and interpret blueprints., • Basic computer skills, including pulling blueprints, checking inventory, and updating production records., • Ability to lift up to 50 pounds repeatedly on a regular basis., • At least 2 years of assembly or manufacturing-related experience., • Experience working in a manufacturing environment., • Mechanical aptitude and comfort working with mechanical assembly tasks., • Ability to use a tape measure accurately., • High School Diploma or GED.Additional Skills & Qualifications, • Mechanical assembly experience is preferred., • Experience working with hand tools in a production or general production environment., • Familiarity with HMI (Human-Machine Interface) systems., • Comfort working on L and XL assembly lines involving heavy lifting., • Ability to work 1st, 2nd, or weekend shifts as needed., • Strong reliability, punctuality, and willingness to learn and follow standard work instructions.Why Work Here? You will join a company that invests in your long-term growth through a structured career progression program once you are hired directly. The organization offers a full benefits package and a stable, climate-controlled environment that supports both your well-being and professional development. Work Environment The role is based in a climate-controlled manufacturing facility focused on production and assembly work. You will work with stainless steel and copper plates, hand tools, tape measures, and HMI-based equipment while using computers to access blueprints and manage inventory. Multiple shift options are available: 1st shift runs Monday through Friday from 6:00 a.m. to 2:30 p.m.; 2nd shift runs Monday through Friday from 2:30 p.m. to 11:00 p.m. with an additional hourly shift differential; and a weekend shift runs Friday through Sunday from 3:00 p.m. to 3:00 a.m., where you work 36 hours and receive pay for a full-time schedule. The work involves regular lifting of up to 50 pounds, particularly on L and XL assembly lines, in a structured and safety-conscious environment. Job Type & Location This is a Contract to Hire position based out of Tulsa, OK. Pay and Benefits The pay range for this position is $17.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tulsa,OK. Application Deadline This position is anticipated to close on Jun 12, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

NOV - 25 South Main Street - Responsibilities: Operates equipment needed to perform job; Maintains the work area and equipment in a clean and orderly condition; Utilize safe work habits; Wear appropriate PPE; Comply with all NOV Company policies, guidelines and procedures.

Boise Cascade - 9999 East 58th Street - Responsibilities: Performs assembly of interior and exterior doors; Work at various machine centers as needed; Verify accuracy of work orders to materials and assembly instructions; Provide basic customer service to internal and external customers; Inspects al

Dover - - Responsibilities: Assemble parts according to Bill of Material, Bill of Operations, engineering drawings and any other related controlled documents; Operates hydraulic and manual presses to assist in assembly operation; Performs test procedures on assemblies as directed; Maintain accurate

NOV - 9910 East 56th Street North - Responsibilities: Operates equipment needed to perform job.Maintains the work area and equipment in a clean and orderly condition.Completes tasks as directed by manufacturing schedules with minimum supervision.Comply with all NOV Company policies, guidelines, and

Nesco Resource - - Responsibilities: Assemble structural aerospace components using drills, rivet guns, and hand tools; Drill, ream, and countersink holes per blueprints; Install fasteners including rivets and bolts; Perform cold-working/swaging operations as required; Read and interpret aerospace

Production Assembler Tulsa, OK Temporary-Full-time 8-5 3 to 4 months $15-$18/hr DOE Primary Responsibility:Detailed oriented, multi-tasker, who possesses mechanical aptitude and can work in a warehouse and assembly environment.

Charts Assembler position plays a key role in the manufacturing process of Charts products.

National Assemblers - - Responsibilities: Receive customer orders to complete installation or assembly jobs in customers' homes; Communicate with customers to confirm appointments; Assemble products to National Assemblers' specifications; Build rapport with customers and ensure 100% satisfaction th

Tulsa OK Area (No overnight Travel Required).Competitive Pay Overtime Opportunities.Are you a hands-on maintenance professional who enjoys variety in your workday and solving problems independently We are seeking a skilled.This is a field-based position that offers a company vehicle tools and the o

National Assemblers - - Responsibilities: Travel to customer sites across surrounding states; Assemble bikes, grills, furniture and other requested items to specifications; Build rapport with customers and ensure satisfaction with quality and service; Operate with reliable transportation to each as

We are seeking dependable and motivated candidates for a.This hands-on role supports daily manufacturing operations by assisting with assembly machine operation quality checks packaging and material movement in a fast-paced production environment.If you enjoy staying active working with your hands a

Job Title: Assembly & Repair Technician.Location: 835 W 41st St South Tulsa OK USA 74104.Under strict supervision assembles and tests Artificial Lift products.Reviews work orders acquires parts for new product assembly and solicits help from and coordinates with manufacturing as necessary.Acquir

JOB TITLE: Robot Machine Operator.Contract (12 months with potential for extension).Must be flexible to work any shift as needed).Aerospace / Defense / Aviation.Medical dental and vision (Cigna).Bonus potential Priority access via Tier 1 supplier.Thousands of opportunities across the U.Do you meet

We are currently looking for a Forklift Operator/Material Handler.Shift: 1st shift 5:30 am - 4:00 pm Monday - Thursday.Receive inspect and organize incoming inventory and supplies.Operate Forklift safely and efficiently.Pick pack and prepare orders for shipping or delivery.Maintain accurate inventor

Monday-Thursday 5:00am-3:30pm Must be available to train on 1st shift M-F.Monday-Thursday 3:30pm-2:00am Must be available to train on 1st shift M-F.Applies basic, and some intermediate technical skills and knowledge to perform various production operations to fabricate, assemble and repair metal

At Aristocrat, we are dedicated to excellence and innovation in the gaming industry.As a Material Handler II, you will play a crucial role in our manufacturing operations, ensuring that our processes run smoothly and efficiently.This is an outstanding opportunity to join a dynamic team where your co

At Muncie Power, our products play a critical role in our society by powering the vehicles that develop key infrastructure, putting out dangerous fires, fixing the power lines that power our homes, and hauling away our garbage.Every team member at Muncie Power understands how important the success o

Responsible for checking built loads for accuracy, loading trucks, and unloading trucks.May load route trucks and semi-trailers with propane or battery-operated forklift and/or pallet jack, moving product in and out of the warehouse as required.May need to perform general housekeeping duties in the

Responsible for the efficient and accurate handling of goods within a warehouse environment.Receive, store, and distribute products while maintaining a clean and organized workspace.This role involves the operation of various warehouse equipment and adherence to safety and quality standards.Schedule

The warehouse employees' job duties may vary within the warehouse operation.Functional areas may include: shipping, receiving, scanning, stocking, issuing, pulling, loading, and inventory of automotive parts, supplies, and equipment.Warehouse employees are responsible for the accurate manual and non

Metals USA has an immediate opening for a Material Handler in our Tulsa, OK facility.The Material Handler, under limited supervision, performs duties related to the storage and movement of inventory or equipment; reports to Group Leader/Shift Supervisor.Receives, places/returns items into stock inve

Oversees, maintains, and repairs building support systems in a complex, warehouse environment.Also, performs maintenance related functions in support of warehouse operations.This role plays a critical part in sustaining operational efficiency and safety standards through proactive upkeep and repair

Warehouse Associate | Home Depot.Warehouse associates are an essential part of The Home Depots distribution network.They load and unload trucks, move material within the facility and from the loading platform by carrying, pushing, rolling or operating hand trucks, forklifts, hoists, motorized convey

A career at Crawford Electric Supply is more than a job.You're investing in a brighter, more sustainable future together and joining a team that makes a real difference for our customers.Crawford Electric Supply offers electrical products and services to contractors.If it helps bring electricity to