Trabajos baker en Independence, MissouriCrear alertas

Job Description PURPOSE The Electrical Control Panel Fabricator is responsible for assembling, wiring, testing, and preparing electrical control panels, enclosures, and related equipment in accordance with approved drawings, specifications, electrical codes, and company quality standards. This position works closely with engineering, project management, electricians, programmers, and field personnel to produce accurate, safe, and reliable control panel assemblies. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. • Read and interpret electrical schematics, wiring diagrams, panel layouts, bills of material, and installation drawings., • Lay out and fabricate control panels, junction boxes, enclosures, back panels, and control cabinets., • Mount electrical components such as breakers, contactors, relays, terminal blocks, power supplies, PLCs, VFDs, transformers, switches, and instrumentation., • Cut, drill, punch, tap, and modify enclosures and mounting panels as required., • Install wire duct, DIN rail, terminal blocks, grounding components, and cable management systems., • Route, label, terminate, and dress control, power, and communication wiring., • Perform point-to-point wiring and verify wiring against electrical drawings., • Use hand tools, power tools, measuring equipment, torque tools, and fabrication equipment safely., • Perform continuity checks, insulation resistance testing, visual inspections, and other quality-control tests as assigned., • Assist with panel power-up, troubleshooting, and functional testing under approved procedures., • Identify drawing, material, or fabrication issues and communicate them to the appropriate supervisor or engineering contact., • Maintain accurate documentation, redlines, test records, inspection checklists, and material usage., • Follow company safety policies, OSHA requirements, electrical codes, and established lockout/tagout procedures., • Maintain a clean, organized, and safe work area., • Support field installation, start-up, service, and troubleshooting activities when needed., • Perform other duties as assigned. MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • High school diploma or equivalent., • Previous experience fabricating, wiring, assembling, or testing electrical control panels or industrial electrical equipment., • Ability to read and understand electrical schematics and wiring diagrams., • Basic understanding of AC and DC control circuits., • Ability to identify and use common electrical components and hardware., • Mechanical aptitude and attention to detail., • Ability to use hand tools, power tools, wire strippers, crimpers, torque tools, and electrical test equipment., • Ability to work safely and follow written and verbal instructions., • Basic computer skills for reviewing drawings, completing documentation, and communicating project information. Preferred Qualifications • Technical school or electrical training., • Experience with PLC control panels, motor control centers, VFDs, instrumentation, or industrial automation systems., • Experience with panel layout, wire numbering, ferrules, terminal blocks, and control wiring standards., • Familiarity with NEC requirements and applicable industry standards., • Experience using electrical testing equipment such as a multimeter, insulation resistance tester, or continuity tester., • Experience with AutoCAD Electrical, Bluebeam, panel design software, or similar programs., • Electrical journeyman license, apprenticeship training, or equivalent field experience., • Experience working in a prefabrication, manufacturing, industrial, or construction environment. MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTAL FUNCTIONS • Strong attention to detail and commitment to quality., • Ability to organize work and meet project schedules., • Ability to troubleshoot wiring and assembly issues., • Ability to work independently and as part of a team., • Ability to communicate effectively with supervisors, engineers, electricians, and project personnel., • Ability to distinguish wire colors, component markings, and identification labels., • Ability to maintain accurate and organized work records., • Ability to stand, walk, bend, stoop, kneel, and work in various positions for extended periods., • Ability to regularly lift and carry up to 50 pounds and occasionally lift and/or move heavier materials with assistance or material-handling equipment as appropriate., • Ability to use hand tools and power tools repetitively., • Ability to work with small components and perform tasks requiring hand and finger dexterity., • Ability to safely work in a shop, construction, or industrial environment., • Vision sufficient to read electrical drawings, labels, wire numbers, and component markings. ENVIRONMENTAL ADAPTABILITY • This position is primarily performed in a fabrication shop, manufacturing facility, or electrical construction environment., • Work may occasionally be required at customer or construction sites., • The position may involve exposure to noise, dust, moving equipment, energized equipment during approved testing activities, and varying temperatures., • Personal protective equipment must be worn as required. EQUIPMENT/TOOLS • Laptop Computer Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job DescriptionBenefits: • Dental insurance, • Employee discounts, • Free food & snacks, • Free uniforms, • Health insurance, • Opportunity for advancement, • Training & development, • Vision insurance At Nothing Bundt Cakes, the Baker is at the heart of it all. Dedicated to perfecting the craft, you see beauty in raw ingredients and strive for consistency when you make our guests’ favorite recipes. You’ll make the cakes that make people’s day, so you’ll get to enjoy yours as well. Here are a few reasons working here is so sweet: Enjoy your evenings: We close earlier than most food service jobs. We offer flexible work schedules. We’re keeping it casual. T-shirts and sneakers are where it’s at! Cake discounts. Yummm! This job is fun. It’s literally a piece of cake! This is a great place to make new friends! It smells great in here, all the time, and you will too! You’ll get trained. Not only on crafting cake, but on growing your career. Apply now. Joy is the job.

Job Description PURPOSE The Senior Automation Engineer provides technical start-up, checkout and programming for Building Automation and Manufacturing Control Systems. Maintain and grow the “Client for Life” concept for existing and new clients. Performs related work as required. Candidates applying through the Little Rock, Fort Smith, or Fayetteville, Arkansas postings should be aware that the position's physical work location is in Clarksville, Arkansas. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Start-up of Microprocessor based control components including PLC and DDC controllers, sensors, actuators, transducers, and associated components., • Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power., • Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc., • Uploading, downloading, and modification of control software and programs., • IP network configurations to include Stratix and Cisco switch configurations, setting up IP addresses, subnet masks, MAC addresses and instance numbers., • Create and troubleshoot automation networks and communication protocols., • Identify and troubleshoot complex HVAC and Electrical automation systems including but not limited to psychometrics, refrigeration, building pressure controls, life safety systems, EPMS, steam heating, humidification and de-humidification, central heating and cooling systems, production lines, servos systems, robot cells, and other production environments., • Map control points into supervisory controller and add alarms and history extensions to supervisory controller points., • Map control points into the graphical front end and link points to graphics., • Create Automation System graphics and dashboards that tie into a SCADA system., • Understand construction and project schedules, and manage QA/QC checklists and commissioning logs, • Interpret Sequence Of Operations (SOO) and apply to program logic., • Read and write code using IEC 61131-3 ladder logic, structured text, and function block programming., • Manage medium to large projects., • Lead, coach, mentor, train and delegate tasks to Automation Technicians and Automation Engineers, • Assist with Tier III Business Development Pursuits., • Assist with the development of Core Process and Standards for the Automation Business Unit., • Travel to job sites as required MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Bachelor’s degree in engineering related field or equivalent work experience, • 7+ years of Automation related field and engineering experience, • Knowledge of common Microsoft Office applications (Excel, Word, Outlook), • Knowledge of Microsoft SQL or other database applications preferred, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Knowledge of construction site safety and a high awareness of surroundings CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Ability to perform independently., • Strong interpersonal skills with effective verbal and written communication., • Ability to follow instructions and meet commitments., • Value and support company Core Focus and Values., • Demonstrated honesty, integrity, sound reasoning, good judgment and values. Lead by example, while maintaining strong internal and external relationships at all levels., • Prioritize and balance long-term goals with immediate tasks., • Ability to listen effectively, value other’s opinions of and acknowledge contributions., • Possess strong communication skills and the ability to collaborate effectively with various stakeholders, including our electrical team members and project managers., • Capability to collaborate efficiently with project team members to resolve issues in a timely manner. ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk and working on a computer, • Must be able to lift 75 pounds occasionally, • May have occasional visits to a job site which would require periods of standing, walking and/or climbing stairs EQUIPMENT/TOOLS • Laptop PC, • Electronic Multimeter, • Magnehelic, • RS-485 and RS-232 Serial Adapters, • Hand tools/Light power tools, • Product Manufacturer Software, • Ladders and Lifts, • Oscilloscope, • Wireshark, • Procore, BIM 360, and other Construction Management Softwares, • Computer systems: Windows, Linux, Command Line Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job DescriptionAt Nothing Bundt Cakes, the Baker is at the heart of it all. Dedicated to perfecting the craft, you see beauty in raw ingredients and strive for consistency when you make our guests’ favorite recipes. You’ll make the cakes that make people’s day, so you’ll get to enjoy yours as well. Here are a few reasons working here is so sweet: Enjoy your evenings: We close earlier than most food service jobs. We offer flexible work schedules. We’re keeping it casual. T-shirts and sneakers are where it’s at! Cake discounts. Yummm! This job is fun. It’s literally a piece of cake! This is a great place to make new friends! It smells great in here, all the time, and you will too! You’ll get trained. Not only on crafting cake, but on growing your career. Apply now. Joy is the job.

Job Description We offer the opportunity to grow and develop to your personal best. Some of our highlighted benefits are: • Flexible work schedule., • Clear and defined training., • Career growth, you are our future!, • Free meals during shift., • Team-oriented workplace., • Employee Referral Program., • Other benefits include Medical, Dental and Vision, and 401k. What you will do: The Brass Bell Baker has the important responsibility of preparing yeast rolls, cakes, pies, specialty desserts and other freshly baked products. RESPONSIBILITIES: Food Production: • Prepares hand-made yeast rolls, cakes, pies, specialty desserts and other baked items., • Prepares breakfast bakery items on weekends to meet production needs., • Complete use and following of the buffet production system to insure quality and shelf life compliance., • Ensures that every product in the bakery is always fresh, tasty, visually appealing and hot, when appropriate., • Maintains quality by preparing all products following Golden Corral recipes and standards., • Maintains proper portioning and recipe yields., • Follows the Bakery and Dessert Café Production Guide and Daily Menu., • Is friendly and courteous to guests and assists them with baked goods., • Knows and follows position responsibilities as they relate to just-in-time delivery., • Maintains Cleanliness, Service and Quality (CSQ) standards and routinely performs CSQ evaluations in their functional areas. • Follows local health department laws., • Position requires standing and walking, lifting and carrying; bending and reaching is required., • Work setting is within the restaurant with employee exposed to temperature extremes., • Work environment includes the use of equipment such as the roll cutter and mixer. If you like working with people in a fun, fast-paced team environment, Golden Corral is the place for you!

Job DescriptionDescription: The Baker is a vital member of our team, responsible for crafting high-quality baked goods. This role requires a passion for baking, a commitment to food safety and sanitation, and the ability to work efficiently in a fast-paced environment. The ideal candidate should have a strong understanding of baking techniques, be detail-oriented, and possess excellent time management skills. They will work collaboratively with the team, demonstrating strong teamwork and communication skills while maintaining a positive attitude. Responsibilities: • Prepare a variety of baked goods, including breads, pastries, and other items, following procedures., • Maintain a clean and organized workstation, adhering to strict food safety and sanitation guidelines., • Monitor oven temperatures and baking times to ensure consistent product quality., • Package and label baked goods appropriately for display and sale, paying close attention to detail., • Assist with inventory management, ensuring adequate supplies are available for daily production., • Collaborate with the team to meet production goals and deadlines, utilizing effective time management., • Provide excellent customer service, addressing customer inquiries and requests with a positive attitude., • Handle food preparation tasks efficiently, demonstrating a commitment to cleanliness and safety standards., • Contribute to sales by ensuring attractive product presentation and promoting baked goods.Minimum Qualifications:, • Working knowledge of baking techniques and procedures., • General knowledge of food safety and sanitation practices., • Ability to lift up to 50 pounds., • Strong communication and teamwork skills., • Ability to work in a fast-paced environment., • Detail-oriented with a focus on quality., • Demonstrated ability to manage time effectively.Preferred Qualifications:, • Previous experience in a bakery or food service environment., • Knowledge of packaging and labeling procedures., • Experience with customer service and sales.

Job Description PURPOSE The Safety Manager will monitors workplace activities to promote and ensure employee compliance with applicable Baker Group safety policies. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be construed as exclusive or all inclusive. Other duties may be required and assigned. • Conduct safety meetings, audits and inspections to ensure compliance, evaluate performance, identify corrective action and implement follow-up assessments., • Plan, implement and conduct safety training for employees on policies, regulations and procedures, • Plan, implement, manage and maintain comprehensive environmental safety and health programs on premises or at project site locations., • Advise the project management team on safety issues and compliance and specific projects and operations with guidance on health and safety in industry, local, state and federal guidelines and regulations., • Partner with management to develop an Emergency Action Plan and serve as primary contact for project site injury and incident notification, investigation and case management., • Collaborate with general contractors and owners regarding site specific safety issues., • Provide support to project managers and field, preplanning, ongoing, etc., • Manage Workers’ Compensation cases, including OCIP and CCIP sites, clinics, injured employees, return to work, etc., • Manage training (OSHA 10/30-hour, CPR/1st aid, site specific, etc.) May analyze training needs to develop new and improved existing training programs., • Participate in L10meetings and provide regular on-site project visibility., • Conduct drug and alcohol testing for new hires, • Provide safety orientation for new hires, • Engage in necessary external training, conferences, etc. to ensure personal growth and continuing education, • Manage safety programs for subcontractors when acting as prime contractor, • Purchase, manage and supply appropriate PPE and safety equipment, • Manage arc flash gear and update and inspect per schedule, • Participate in weekly, quarterly and annual EOS planning meetings, • Generate Safety Bulletins to communicate incidents and jobs well-done, • Maintain worker’s unions relationships, • Respond to employee’s mental health issues and provide support and resources, • Work with DevOps to generate company forms, • Participate in OSHA partnership walks, • Participate in and respond to OSHA inspections MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • High school diploma or equivalent, • Associates Degree in Safety, Health, Engineering or related discipline preferred, CHST, or CSP, GSP, ASP and/or 5 years’ experience in construction or industrial safety., • Knowledge of local, state and federal safety standards, as well as Workers’ Compensation procedures. CERTIFICATES, LICENSES, REGISTRATIONS • Current certifications in First Aid, CPR/AED, OSHA 30-hour Construction Safety or general Industrial safety MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Strong supervisory, conflict management, multi-tasking and problem-solving ability, • Experience in writing reports and business correspondence in addition to effectively presenting information and responding to questions from senior management, site supervision, clients and employees, • Excellent communication skills, maintaining professionalism when communicating with staff and clients alike, • Strong organization and adaptability skills, • Ethical integrity, • Special interest in safety that goes beyond mere working knowledge of safety requirements, • Risk assessment/management, • Conceptual planning capability, • Demonstrated ability to relate to contractors and their employees, • Must be able to work independently with little supervision, • Ability to travel to all worksites; overnight travel may be required, • Adaptability to a changing workplace, in all weather conditions, in an office and job site setting, • Must have technical capabilities including email, internet and computers, etc. ENVIRONMENTAL ADAPTABILITY • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • PPE (safety toe boots, hard hat, safety glasses, gloves, hi-vis vest), • Clothing: weather appropriate, • Ear plugs, • Utility knife, • Ladder, • Lift, • Fall protection, • Microsoft Office Software, • Basic knowledge of tools, • Able to utilize most hand tools Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description PURPOSE The Safety Specialist is responsible for promoting and maintaining a safe, healthy, and incident-free work environment for all jobsite personnel. This role leads the development, coordination, and enforcement of jobsite safety programs and accident prevention strategies, ensuring compliance with company policies and regulatory requirements. Additionally, the Safety Specialist supports the company’s commitment to the “Client for Life” philosophy by fostering strong, safety-focused relationships with both new and existing clients. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Conduct new hire employment and safety orientations, • Provide oversight and enforce safety compliance among subcontractors, • Audit jobsites to identify potential health and safety risks; implement corrective and preventative measures, • Deliver onsite safety training sessions, • Operate and maintain safety equipment such as air monitors, fall protection systems, and confined space gear, • Maintain up-to-date knowledge of OSHA regulations and project-specific safety requirements, • Input and manage training records in the Training Vault system, • Develop and maintain standard safety policies and procedures, • Manage Workers' Compensation claims:, • Accompany injured employees to medical facilities, • Complete all required case documentation, • Conduct root cause analyses, • Investigate workplace incidents:, • Perform root cause analysis, • Submit required incident reports, • Communicate safety hazards and updates to onsite personnel, • Lead Toolbox Talks and Safety Stand-Downs at jobsites, • Inspect, document, and manage safety equipment inventories, • Assist in the pre-planning of high-risk operations, including crane pick plans, • Administer onsite drug and alcohol tests as needed (pre-employment and post-incident) MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Associate or bachelor’s degree in safety, or related field OR equivalent experience, • Three (3) years’ experience in construction safety and/or OSHA training, • GSP, CSP, CHST, a plus CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license with acceptable driving record, • OSHA 30 Certified, a plus, • First Aid/CPR Certified, a plus MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Exceptional customer service skills, • Strong organization, prioritization and attention to detail, • Must have proficient Microsoft Word, Power Point and Excel skills, • Excellent verbal and written communication skills, • Demonstrated ability to partner with employees at all levels of the organization, • Demonstrated competence in reacting to and handling emergency situations, • Ability to adapt to a quickly changing workplace ENVIRONMENTAL ADAPTABILITY At any given time, may be exposed to: • Changing conditions on a construction site and/or industrial site risks and environment, • Variety of temperature and weather conditions EQUIPMENT/TOOLS • Laptop PC, • PPE (hard toe boots, hard hat, safety glasses, gloves, hi-vis vest, harness), • Weather appropriate clothing, • Basic knowledge of tools Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Baker, Donelson, Bearman, Caldwell, & Berkowitz, PC has an immediate opening for an Information Technology (IT) Project Manager located anywhere within the Firm’s geographical footprint.

Sales Executive – SaaS (Intellectual Property Technology) | United States.Its SaaS platform is used by corporate legal teams, IP counsel and law firms, and it now wants a high-performing Sales Executive to drive new business across the US.You will own the full sales cycle, from prospecting and dis

The Baker is responsible for delivering high-quality customer service through the safe, accurate, and timely delivery of LaMar's Donuts and Coffee products, early-morning baking and production tasks, and general bakery operations. Baker reviews production schedules to determine items needed for dail

Responsibilities: Food Production: prepares hand-made yeast rolls, cakes, pies, specialty desserts and other baked items; prepares breakfast bakery items on weekends to meet production needs; complete use and following of the buffet production system to insure quality and shelf life compliance; ensu

Pay rates starting between: $15.Are you passionate about team building, customer service, and meeting new people? Pilot Company offers a dynamic environment where no two days are the same.Team members have the opportunity to build an inclusive atmosphere with their co-workers and make a better day f

Baker And Packager AssociateSam's Club #6247 8130 N Church Road Kansas City, MO 64158-0000 Shifts may varyDo you have a knack for helping people, following recipes and organization? Our Bakery/Packager associates prepare fresh baked items daily for our members through follow recipes and wrapping, la

Baker The Baker is responsible for delivering high-quality customer service through the safe, accurate, and timely delivery of LaMar's Donuts and Coffee products, early-morning baking and production tasks, and general bakery operations. Baker cuts, weighs, molds, proofs, fries, and decorates donuts

Join Our Growing Family From "Happy Birthday" to "Just Because," Nothing Bundt Cakes is committed to bringing joy to our guests and our communities and helping make every celebration sweeter! Each bakery offers a warm and welcoming work environment with team members who embody this joy-filled brand

About Baker Sterchi Cowden & Rice LLC Founded in 1982, Baker Sterchi is a civil defense litigation and trial law firm with offices in Missouri, Kansas, Illinois, Washington, Oregon, and Wisconsin. Baker Sterchi Cowden & Rice LLC, a litigation defense firm with over 200 employees, is seeking a highly

Deli Baker Pay rates starting between: $15.

Join Our Growing Family From Happy Birthday to Just Because, Nothing Bundt Cakes is committed to bringing joy to our guests and our communities and helping make every celebration sweeter! Each bakery offers a warm and welcoming work environment with team members who embody this joy-filled brand and

Baker The Baker is a vital member of our team, responsible for crafting high-quality baked goods. Preferred Qualifications: Previous experience in a bakery or food service environment.

Job Description PURPOSE Automation Technicians will be responsible for supporting our Project Managers and System Engineers with creating, installing, and commissioning of PLC/HMI/SCADA based systems as well as network and device integration work. Candidates applying through the Little Rock, Fort Smith, or Fayetteville, Arkansas postings should be aware that the position's physical work location is in Clarksville, Arkansas. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Complete start up and commissioning of new PLC/HMI/SCADA control systems, service and maintenance of existing installations, fault diagnoses, hardware repairs, programming bug fixes and alterations on customer sites, • Complete diagnosing and resolving technical problems on job sites and provide appropriate reports to Project Management or Operations Leaders via email, SharePoint, OneDrive, or other repository applications, • Attend and participate in project kickoff and turnover meetings with Project Managers to gain knowledge of project estimate, scope and finalize project completion documentation, • Organize and maintain control submittal project redlines and submit to design engineer at project conclusion for as built drawing package creation, • Work with other technicians to develop and share technical solutions, • Actively participate in technician training to maintain technical expertise on new products, tools, and integration through continuing education initiatives MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Associate’s degree specialized in Robotics, Automation, Technology or Minimum of 3-5 years of experience with PLC/HMI control system in lieu of Associate’s degree, • Or Bachelor’s degree specialized in Technology, Engineering, Manufacturing MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Working knowledge of at least one PLC software (i.e. Rockwell Suite, Modicon Unity Pro or Control Expert, Mitsubishi, or many others), • Working knowledge of at least one HMI software (i.e. Rockwell FactoryTalk View or Wonderware InTouch, or many others), • Working SCADA knowledge of at least one platform (i.e. Ignition, Factory Talk View SE, Optix, GE iFix, Ecostruxure Power Operations or SCADA, and many others), • Knowledge of common Windows Office applications and Repositories (i.e. OneDrive, SharePoint, GIT), • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both orally and written, • Ability to travel to customer locations for overnight work approximately 25% ENVIRONMENTAL ADAPTABILITY • Prolonged periods of sitting at a desk working on a computer, • Must be able to lift 20 pounds occasionally, • Significant field and client interactions on construction job sites, which may require prolonged periods of standing, walking and/or climbing stairs, • Occasional exposure to variety of temperature and weather conditions EQUIPMENT/TOOLS • Laptop Computer Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job Description PURPOSE Provide technical start-up, checkout and programming for Building Automation and Control Systems. Maintain and grow the “Customer for Life” concept for existing and new customers. Performs related work as required. Candidates applying through the Little Rock, Fort Smith, or Fayetteville, Arkansas postings should be aware that the position's physical work location is in Clarksville, Arkansas. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Start-up of Microprocessor based control components including DDC controllers, sensors, actuators, transducers, and associated components, • Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power, • Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc., • Uploading, downloading, and modification of control software and programs, • Perform BACnet networking functions such as setting up IP addresses, subnet masks, MAC addresses and instance numbers, • Identify and troubleshoot basic HVAC systems, • Map control points into supervisory controller and add alarms and history extensions to supervisory controller points, • Map control points into graphical front end and link points to graphics, • Create Automation System graphics and dashboards, • Understand construction schedules and manage QA/QC checklists and commissioning logs MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Associates in Electronic, Technology, or Automation related field or equivalent on the job experience CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Ability to perform all necessary duties unsupervised, • Knowledge of common Windows Office applications, • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both orally and written, • Ability to take direction and full fill commitments, • Value and support company mission and culture, • Display honesty, integrity, sound reasoning, good judgment/values, and lead by example, all while maintaining strong internal and external relationships at all levels, • Understanding of construction site safety and display a high awareness of your surroundings, • Effectively prioritize and balance the “big picture” and immediate responsibilities, • Ability to listen effectively, value the opinions of others and acknowledge contributions of others, • Ability to communicate and work well with others at all levels ENVIRONMENTAL ADAPTABILITY At any given time, may be exposed to: • Typical construction site and/or industrial site risks and environment EQUIPMENT/TOOLS • Laptop PC, • Electronic Multimeter, • Magnehelic, • Hand tools/Light power tools, • Product Manufacturer Software, • Ladders and Lifts, • Computer systems: Windows, Linux, Command Line Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

Job DescriptionPURPOSE Provide technical start-up, checkout and programming for Building Automation and Control Systems. Maintain and grow the “Customer for Life” concept for existing and new customers. Performs related work as required. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and assigned. • Start-up of Microprocessor based control components including DDC controllers, sensors, actuators, transducers, and associated components, • Point-to-point checkout of wiring and components for proper grounding, polarity, communication and power, • Set up and calibration of input and output devices such as temperature sensors, pressure transducers, etc., • Uploading, downloading, and modification of control software and programs, • Perform BACnet networking functions such as setting up IP addresses, subnet masks, MAC addresses and instance numbers, • Create and troubleshoot BACnet and Modbus networks, • Identify and troubleshoot HVAC and Electrical systems, • Map control points into supervisory controller and add alarms and history extensions to supervisory controller points, • Map control points into graphical front end and link points to graphics, • Create Automation System graphics and dashboards, • Understand construction schedules and manage QA/QC checklists and commissioning logs, • Ability to interpret HVAC Sequence Of Operations (SOO) and apply to DDC program logic, • Mentor, training, and oversee Automation Technician I, • Lead small to medium size projects unsupervised MINIMUM EDUCATION & EXPERIENCE REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • 3-5 years of Automation related field experience, • Associates in Electronic, Technology, or Automation related field or equivalent on the job experience CERTIFICATES, LICENSES, REGISTRATIONS • Valid driver’s license MENTAL AND PHYSICAL COMPETENCIES REQUIRED TO PERFORM ESSENTIAL FUNCTIONS • Ability to perform all necessary duties unsupervised, • Knowledge of common Windows Office applications, • Knowledge of Microsoft SQL or other database applications preferred but not required, • Knowledge of Ethernet and serial network communication formats and hardware configurations, • Understanding of basic process controls (i.e. PID control loops, motor control, commissioning of digital and analog measurement devices), • Excellent interpersonal skills with ability to communicate effectively, both orally and written, • Ability to take direction and full fill commitments, • Value and support company mission and culture, • Display honesty, integrity, sound reasoning, good judgment/values, and lead by example, all while maintaining strong internal and external relationships at all levels, • Understanding of construction site safety and display a high awareness of your surroundings, • Effectively prioritize and balance the “big picture” and immediate responsibilities, • Ability to listen effectively, value the opinions of others and acknowledge contributions of others, • Ability to communicate and work well with others specifically but not limited to our electrical team members and project management staff at all levels, • Effectively train, mentor, and delegate work tasks to lower-level Automation Technicians, • Ability to effectively work with your project team members to resolve issues promptly ENVIRONMENTAL ADAPTABILITY At any given time, may be exposed to: • Typical construction site and/or industrial site risks and environment EQUIPMENT/TOOLS • Laptop PC, • Electronic Multimeter, • Magnehelic, • RS-485 and RS-232 Serial Adapters, • Hand tools/Light power tools, • Product Manufacturer Software, • Ladders and Lifts, • Computer systems: Windows, Linux, Command Line Baker Group is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Baker Group will consider reasonable accommodations for qualified individuals with disabilities and encourage prospective employees and incumbents to discuss potential accommodations with the Employer.

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

HOUSEKEEPER: Job post summary Date posted: January 17, 2025 Pay: $17.Job description: Job Description Job Title: Housekeeper Division: Rooms Department: Housekeeping Reports To: Housekeeping Manager FLSA Status: Non-Exempt Summary: Perform any combination of cleaning duties to maintain hotels in a c

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

Hendrick Collision Center of Kansas City Location: 9400 Troost Ave, Kansas City, Missouri 64131 Summary: Responsible for answering and directing incoming phone calls.Greets customers as they enter the lobby, dealership showroom, or service area.Supervisory Responsibilities: This job has no direct su

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

The Housekeeper position must demonstrate and promote a strong commitment to providing the best possible experience for our guests.The position is responsible for cleaning guest rooms in accordance with company guidelines and procedures.Demonstrates and promotes a 100% commitment to providing the be

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

Overall responsibility of delivering high quality, efficient, individualized and technically excellent butler and cleaning services in guest suites, public areas and back of house in accordance with Company Policies, strictly upholding any Public Health standards and towards a goal of achieving tota

A career at Whole Foods Market is more than just the work you do- it's about your personal growth and creating meaningful change.Our purpose is to nourish people and the planet.That means improving how people eat, funding grants for school gardens, providing access to fresh and healthy food to peopl

Job Title: Roofing Crew Member.Reports To: Project Manager / Foreman.The Roofing Crew Member is responsible for assisting with the installation, repair, and maintenance of roofing sealant systems.This is a hands-on field position that supports daily jobsite operations and ensures work is completed s

Hy-Vee - - Responsibilities: Unload trucks and rotate product overnight; Stock shelves and backroom organization; Tag overstock and understock items; Assist customers with finding items and questions; Report mis-picks and delivery issues to team.

Walmart - 10300 E Highway 350 - [Retail Associate / Store Receiver / Team Member / up to $21-hr] - As a Stocker / Unloader at Walmart, you'll: Ensure customers can find all of the items they have on their shopping list; Unload trucks; Move and sort products in the backroom; Stock products on shelves

Sam's Club | Medical, Dental, Vision, Rx + 401(k) with match + PTO + 100% Reimbursement of Tuition & Books | Responsibilities: Stock freezer, cooler, and deli area; Maintain temperature control and sanitation; Assist members with locating merchandise; Receive and stock merchandise; Maintain displays

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging.We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges.Guided by our values of safety, loyalty, integrity and respect, we are committed

Responsibilities: Stock and straighten merchandise for sale in the warehouse; Clear and clean aisles and assist members; Assist forklift drivers and maintain safety practices; Stock opened cases and move pallets with pallet jack; Set up displays and modify for safe handing; assist in other departmen