Trabajos Construction & Trades en Virginia - Page 4

Overview: Hogan & Sons Tire and Auto - We provide a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages. The State Inspector will perform state inspections. While working alongside ASE Certified Automotive Technicians, you will get the training necessary to get to the next level in your career. If you are interested in becoming a certified ASE Automotive Technician, this is the opportunity for you. This could be the beginning of your successful career. REQUIRED: Must have a current/valid Virginia State Inspection Certification and Emissions Up to $25/hr- Inspector Only (MUST HAVE- VA state safety AND VA Emissions inspector) TECHNICIAN W/ C.R.T (VA state safety AND VA Emissions inspector- Where applicable) up to $45 Flat Rate hour Sign on Bonus eligible: $1,000. Benefits: • Competitive Bi-Weekly Pay, • Tuition Reimbursement, up to $3,000 annually, • Paid Vacation and Sick Time, • 6 Paid Holidays, • Medical, Dental and Vision Insurance, • Health/Flexible Spending Account, • Employee Assistance Program, • Telemedicine Program, • Supplemental Critical Illness, Hospital and Accident Plans, • Life Insurance (Company paid), • Short/Long Term Disability, • Health Savings and Flexible Spending Account, • 401(k) Retirement Savings Plan with Company Match, • Discounted Services on Personal and Immediate Family Vehicles, • Opportunity for Advancement!!! Principal Duties and Responsibilities: • Successfully complete inspections on customer's vehicles., • Safely transports customers to and from their place of residence or business using the company vehicle., • Picks up parts, supplies, tires, etc. from vendors and/or the corporate office using the company vehicle., • Operates company vehicle in a safe and courteous manner obeying all traffic laws., • Conducts State Safety and Emission Inspections on vehicles in an ethical manner following all company and state guidelines., • Performs tire mounting/dismounting, wheel balance and tire rotation., • Performs oil changes and other basic services at the direction of the Shop Foreman or Store Manager., • While performing basic services, observes general vehicle condition and points out any obvious needed repairs or safety concerns to the Shop Foreman or Store Manager. Utilizes the company’s Multi-point Inspection and/or Repair Order to properly document the vehicle condition., • Maintains cleanliness of the shop to include the service area, tire racks, showroom and outside the building to maintain a clean and inviting appearance., • Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Qualifications: • High School Diploma or equivalent, • Possess valid driver’s license and pass MVR Screeening., • Must be at least 18 years of age, • Current Virginia state inspector's license + Emissions. Candidates must have a high level of motivation and be able to work in a fast-paced environment -- there is ALWAYS something to do. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Overview: Hogan & Sons Tire and Auto - We provide a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages. The Senior Automotive Technician/Mechanic is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers and company standards. COMPENSATION: Up to $50 Flat Rate Principal Duties and Responsibilities: • Diagnoses vehicles according to the appropriate level of certifications/experience., • Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy., • Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers., • Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file., • Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager., • High School Diploma or equivalent, • Prefer a minimum of one unexpired ASE or equivalent experience or training, • Possess valid driver’s license, • Must be at least 18 years of age, • Competitive Bi-Weekly Pay, • Tuition Reimbursement, up to $3,000 annually, • Paid Vacation and Sick Time, • 6 Paid Holidays, • Medical, Dental and Vision Insurance, • Life Insurance (Company paid), • 401(k) Retirement Savings Plan with Company Match, • Discounted Services on Personal and Immediate Family Vehicles

Overview: Hogan & Sons Tire and Auto - We are a multi-generational family business that provides a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages. The Senior Automotive Technician / Mechanic is responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s and company standards. COMPENSATION: Up to $45 Flat Rate Automotive Technician / Mechanic Benefits: • Competitive Bi-Weekly Pay, • Tuition Reimbursement, up to $3,000 annually, • Paid Vacation and Sick Time, • 6 Paid Holidays, • Medical, Dental and Vision Insurance, • Health/Flexible Spending Account, • Employee Assistance Program, • Telemedicine Program, • Supplemental Critical Illness, Hospital and Accident Plans, • Life Insurance (Company paid), • Short/Long Term Disability, • Health Savings and Flexible Spending Account, • 401(k) Retirement Savings Plan with Company Match, • Discounted Services on Personal and Immediate Family Vehicles, • Opportunity for Advancement!!! Principal Duties and Responsibilities: • Diagnoses vehicles according to the appropriate level of certifications/experience., • Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy., • Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers., • Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file., • Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager., • High School Diploma or equivalent, • Prefer a minimum of one active ASE or equivalent experience or training, • Possess valid driver’s license, or obtain a valid Virginia driver’s license within 30 days of hire date

SHIPFITTER TRAINEE - COMPLETE 3 WEEKS OF FREE TRADES TRAINING 7AM-3:30PM Location: Newport News, Virginia, United States Date: Mar 19, 2026 Req ID: 45606 Team: X11 FITTERS Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Full-Time Shift: Multiple Relocation: No relocation assistance available Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role This position is for job seekers with no trades experience willing to complete three weeks of unpaid training in Shipfitting. Newport News Shipbuilding has partnered with the Virginia Ship Repair Association and local Virginia community colleges and maritime training facilities to offer several course-to-hire Marine Trades Training (MTT) programs for individuals interested in learning a trade and working full-time for Newport News Shipbuilding. Courses are offered once a month with 6-15 students per class. The Shipfitter Trainee program is offered at Camp Community College (Suffolk, VA), Virginia Peninsula Community College (Hampton, VA), or Tidewater Community College (Portsmouth, VA). Each (UNPAID) program is 3-weeks (120 hours), 7:00am - 3:30pm (Monday thru Friday). To learn more about the Marine Trades Training (MTT) programs and how the process works, please visit: Shipfitters, often referred to as "carpenters" of shipbuilding or "artists of steel" are essential for interpreting blueprints and plans to fabricate and assemble the steel structures of aircraft carriers and submarines. They use a variety of tools to measure, cut, grind, fit, align, and tack weld components, ranging from small parts to large sub-assemblies and super lifts that form the ship's structural body. In addition to fabricating external structures, shipfitters construct all interior components, including hatches, doors, and bulkheads completing the steel work on the vessel. At NNS, shipfitters undergo training and qualification at the shipyard's state of the art welding school. Their skills will be applied in multiple locations across the shipyard including shops, concrete and metal structures, dry docks, and aboard ships in support of new construction, ship repair, and overhaul. Working at Newport News Shipbuilding often involves performing tasks in various weather conditions, at extreme heights on scaffolding, ladders, or elevated platforms and in small, confined spaces such as tanks, compartments, or voids in a ship. These environments require a strong focus on safety, precision, and adaptability, as well as physical agility and comfort working in challenging conditions. Watch this video to learn more: Must Have Must be able to pass a 3-week (UNPAID) program (120 hours), 7:00am - 3:30pm (Monday - Friday) Must be willing to undergo a background investigation and drug screen Must be able to kneel, squat, crawl, bend, stoop, and climb on a daily basis Must be able to lift at least 40 pounds Must be able to perform overhead work Must be able to work overtime as needed Must be able to be clean shaven to wear a respirator Must be able to perform work outdoors, year- round, in all weather conditions Must be able to work at extreme heights Must be able to work in small, tight, confined spaces Must be willing to work any shift Nice to Have High school graduate or equivalent preferred. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call 1-844-849-8463 for assistance. Press #2 for Newport News Shipbuilding.

Company Profile Oceaneering Marine Services Division (MSD) has over 30 years of experience providing full-service submarine and surface ship repairs supporting maintenance and alterations aboard commercial and U.S. military vessels. We are SUBSAFE and DSS-SOC certified and perform high-consequence maintenance on assets that operate in demanding environments. Oceaneering Aerospace and Defense Technologies (AdTech) delivers solutions that enable humans to work safely and effectively in harsh environments - from underwater to the outer reaches of space. Our innovative solutions support the development and application of practical, cost-effective systems that meet our customers' challenges - from routine to extreme. Our experience and expertise across multiple industries uniquely positions us as a leader in the government, space, and maritime services markets. Our products and services meet the rigorous demands of the complex environments in which they operate, delivering results without compromising safety or reliability. Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. Position Summary Performs electrical and electromechanical repairs. Assist with conducting system grooms and checkouts, and configuration validation. Prepare and install systems alterations. Involves heavy lifting, frequent stooping or bending and possible working assignments in overhead structures, confined spaces or beneath machinery. Strict adherence to safety, quality standards, good housekeeping habits, high level of critical thinking/reading comprehension, and frequent travel/overtime are required. Duties And Responsibilities \n • Requires limited supervision/oversight and is familiar with the trade qualifications and can perform most tasks required as an Electrician. \n, • Assist in performing component and/or system troubleshooting to diagnose problems. \n, • Assist with the performance of on-site electrical service for system grooms and checkouts, minor repairs and system configuration validation. \n, • Prepare and install equipment or system alterations in accordance with the technical specifications. \n, • Assist with the conduct of shipboard work for electrical system/component evaluations.\n, • High School/GED with Apprenticeship Diploma and additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine electrical systems in a repair department or shipyard.\n, • Must have the ability to obtain government base access.\n, • Knowledge and practical skills tests required.\n, • Fiber Optic Splicing, Deep Submergence Systems (SOC MCD A, B, and C), SUBSAFE Qualification. \n, • Must be able to obtain a Secret/Confidential security clearance.\n PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP/INDOORS which is characterized as follows: \n • Primarily indoors during the day and occasionally at night\n, • Frequently working on or near moving equipment and vibrating equipment\n, • When outdoors, humidity is frequently above 90%\n, • Noise is over 85 decibels\n, • Light is intense/glare\n, • Occasional exposure to open fire/flames/sparks\n, • Frequent exposure to airborne dust, fumes, and gases\n, • Includes exposure to contaminants\n, • Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures\n, • Includes exposure to sounds and noise levels that are distracting or uncomfortable\n, • Job tasks are performed in close physical proximity to other people\n The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. OCCASIONAL FREQUENT CONSTANT \n • Lift 20-50 pounds.\n, • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.\n, • Identify color differences.\n, • Wear PPE for skin protection.\n\n\n, • Lift 10-25 pounds.\n, • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.\n, • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.\n, • Operate a motor vehicle.\n\n\n, • Lift up to 10 pounds.\n, • Wear PPE protection for body, vision, and hearing protection.\n\n Equal Opportunity Employer All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity, national origin, veteran status, disability, genetic information, or other non-merit factors. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Now Hiring: Journeyman Welder with Active Clearance Location: Kings Bay, GA Company: NSC Staffing Send resumes to: [email protected] NSC Staffing s seeking an experienced Journeyman Welder with Active Clearance. This position is ideal for highly skilled welders with extensive experience in shipbuilding, power plant construction, bridge construction, or large-scale commercial construction environments. If you are a seasoned welder with strong technical knowledge and a commitment to safety and quality, we want to hear from you! Position Overview: As a Journeyman Welder with an active clearance, this role requires in-depth knowledge of welding procedures, blueprint interpretation, and strict adherence to safety standards. You will work with multiple welding processes, including SMAW, FCAW, and GTAW, ensuring all welds meet applicable codes, specifications, and quality requirements. Key Responsibilities: • Perform welding tasks in heavy industrial environments such as shipbuilding, power plants, bridge construction, and commercial construction sites, • Utilize proper welding techniques and procedures to produce high-quality welds, • Read and interpret blueprints, layouts, and welding symbols accurately, • Set up and operate grinding containments and welding equipment safely, • Perform welding using SMAW, FCAW (automatic), and GTAW processes, • Follow OSHA safety regulations and site-specific safety requirements, • Maintain accurate documentation related to welding activities and inspections, • Work efficiently while maintaining high standards of craftsmanship and safety Qualifications & Experience: • Minimum six (6) years of verifiable welding experience in heavy industrial applications, • Proven experience in shipbuilding, power plant construction, bridge construction, or commercial building construction, • Proficient in Submerged Metal Arc Welding (SMAW), Flux-Core Automatic Welding (FCAW), and Gas Tungsten Arc Welding (GTAW), • Strong knowledge of welding best practices and quality control standards, • Skilled in blueprint reading, layout procedures, and welding symbol interpretation, • Experience with grinding containments and related equipment, • OSHA 10 and/or OSHA 30 certification required, • High School Diploma, Vocational School Diploma, or GED required, • Completion of a formal welding training program preferred (apprenticeship, technical school, military training, or formal company program), • U.S. Citizen with an active or eligible Secret Security Clearance Work Environment: This role involves working in industrial or shipyard settings, which may include confined spaces, elevated platforms, and variable temperatures. Candidates should be comfortable working in physically demanding conditions and following established quality and production standards. Why NSC Staffing? NSC Staffing is a trusted leader in Marine and Industrial staffing - connecting skilled tradespeople with top employers nationwide. We value safety, skill, and dedication while offering long-term opportunities for our workforce. Benefits of Joining NSC Staffing: • Competitive pay, • Comprehensive medical, dental, and vision coverage, • 401(k) retirement plan, • Direct deposit or Global Cash Card option, • Long-term employment opportunities, • OSHA and craft-specific training, • Referral bonuses for qualified candidates Company Overview NSC Staffing is a premier provider of skilled, technical, and professional talent across the Marine, Energy, Industrial, and Commercial sectors. Our dedication to quality, safety, and service excellence sets us apart and supports long-term success for both our clients and employees. Join Our Team Today! Advance your shipyard leadership career with NSC Staffing - a trusted leader in industrial and marine staffing. Visit our jobs page: / NSC Staffing is a drug?free workplace and an Equal Opportunity Employer (EOE AA/M/F/V/D). #MA50

Overview About M.C. Dean M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. Why Join Us? Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. A Licensed or Non-Licensed Electrician installs basic electrical equipment and systems in accordance with all applicable plans, specifications, codes, and industry standards. Responsibilities \n • Assembling, installing, testing, and maintaining electrical or electronic wiring, conduit, cable, equipment, components and devices associated with electrical equipment, following blueprints of electrical layouts and building plans.\n, • Installing and mounting electronic controls, device, panels, sensors, and components.\n, • Performing interlock wiring as required.\n, • Testing electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices.\n, • Inspecting installation sites and studying work orders, building plans, and installation manuals in order to determine materials requirements and installation procedures.\n, • Diagnosing malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.\n, • Reading contract drawings.\n \n • Four (4) years of experience working in the electrical industry.\n, • High School diploma or GED required.\n, • Must successfully pass a background check and drug test\n, • Reliable Transportation\n, • Possibility for mandatory overtime, which may fluctuate and include night and weekend work.\n\n Working conditions and environment: \n • This position is physically demanding and often requires working outdoors while exposed to all types of weather conditions and while working in all types of environments. For example, the incumbent may be required to work, depending on the job location and the time of year, in the heat, cold, rain and snow.\n, • This position also requires working at extreme heights, in areas that are under construction, or in restricted areas such as a switchgear room, manhole, utility tunnel, crawl space or attic.\n, • The incumbent must be able to access work areas that are accessible only by O.S.H.A. approved site construction ladders or stairs that are under construction.\n, • Additionally, this position requires flexible work hours. In order to get a project completed on time, employees are often required to work overtime, weekends and night shifts.\n, • The incumbent must work in the presence of customers and their representatives with little or no interference or disruption to the customer while maintaining a professional and courteous image.\n\n Abilities: \n • The position requires the ability to lift, carry, and move objects weighing up to [50 pounds] on a regular basis. Candidates must demonstrate physical strength and stamina to perform various tasks, including but not limited to, loading, and unloading, operating equipment, and assisting in the transportation of various materials. Proper lifting techniques and safety protocols must be followed to ensure personal and team safety.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n

Date Posted: 2026-01-20 Country: United States of America Location: US-VA-CHESAPEAKE-305 1100 International Plz BLDG 305 Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance Type: None/Not Required Security Clearance Status: Not Required Job Description At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. We are seeking a detail-oriented and motivated Electro-Mechanical Assembler Associate to join our team. The successful candidate will be responsible for assembling, testing, and inspecting electro-mechanical components and systems in accordance with engineering drawings, specifications, and quality standards. This role is critical to ensure the reliability and performance of our products. What You Will Do \n • Perform system and sub-assembly level electronic component and small gauge wire builds, which may involve tasks such as soldering, crimping, routing, and connecting wires according to engineering schematics, work instructions, or technical specifications.\n, • Upgrades and repairs in accordance with assembly instructions and MIL-standard drawings to ensure compliance with military specifications and quality standards.\n, • Follow written and verbal directions, as well as read and interpret engineering drawings, wiring diagrams, wire lists, and connector pin-outs for complex assemblies.\n, • Mechanical and electrical assembly of complex Navy shipboard assemblies, including various types of populated chassis, through-hole circuit card assemblies (CCAs), and component board assemblies.\n, • Conduct visual inspections and functional tests on assembled units to ensure compliance with engineering specifications, quality standards, and customer requirements.\n, • Maintain a clean, organized, and safe work area by adhering to all safety protocols and company policies.\n, • Perform in a fabrication and repair environment.\n, • Ability to stand, sit, and perform repetitive tasks for extended periods.\n, • Ability to lift and move components weighing up to 35 pounds.\n, • Possess knowledge and understanding of IPC-A-620 wire and cable requirements, as well as J-STD-001 and IPC-A-610 soldering standards.\n, • This is a 1st shift, onsite position.\n\n Qualifications You Must Have \n • Typically requires HS diploma (or equivalent, e.g. G.E.D in the US) or vocational/ technical education in related discipline with a minimum of 2 years of relevant experience\n, • Experience with electro-mechanical assembly techniques and tools\n, • Experience with engineering drawings\n, • U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.\n\n Qualifications We Prefer \n • Experience with Microsoft Office\n, • Experience a manufacturing or aerospace environment.\n, • Familiarity with IPC-A-620 wire and cable requirements, as well as J-STD-001 and IPC-A-610 soldering standards.\n\n What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation. Relocation assistance not provided for this position. Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range for this role is $25-$28/hour. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement Description Position Location: Norfolk, VA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1-5 years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $17.00 - $33.00 hourly In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-26-00014 This position is currently accepting applications.

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Amee Bay, LLC a subsidiary of Three Saints Bay, LLC and a Federal Government Contractor industry leader, is seeking an experienced Brazer / Welder to join our Ship Repair Division in Chesapeake, VA. We're looking for a hardworking professional who enjoys meeting challenges and surpassing customer expectations who is looking for a secure and rewarding form of employment. The ideal candidate will have a strong mechanical background and able to qualify to established weld processes for aluminum and steel welds, joints, and will be willing to work on-site as well as onboard US Navy and US Coast Guard vessels to complete jobs for customers on time and on budget. Position Responsibilities: Qualified candidates will be expected to: \n • Implement and monitor OSHA safety practices.\n, • Qualify and maintain qualification to established MIG, TIG and other types of welds based on project needs on aluminum, mild steel, stainless steel materials.\n, • Field install welds, including duct work, equipment foundations, piping, light fixtures, vents, fans, metal sheeting and other parts.\n, • Select proper fillers for jobs based on previous experience or project instructions.\n, • Report job progress to the Job Lead, Team Lead or Project Manager and recommends changes as required such as changes in personnel, material, or tools.\n\n Position Requirements: \n • United States Citizenship.\n, • Must be able to pass a background investigation and drug screen as a condition of employment.\n, • Must be able to acquire and maintain a Secret Security Clearance; candidates currently possessing an Active Secret Clearance are preferred.\n, • Minimum of High School Diploma or equivalent.\n, • Capable of making sound welds using SMAW, GMAW and GTAW methods.\n, • Versed in the use of all types of fabrication and testing measuring instruments.\n, • Ability to learn marine piping systems temperature/pressure parameters.\n, • Understand joint design requirements and efficiency levels and joint fit-up specifications for fabrication and repair of piping systems and structural elements.\n, • Understanding of all hot work requirements.\n, • Basic ability to read and interpret blueprints, sketches and drawings.\n, • Understanding of the requirements for operational and hydrostatic testing of repair or modified ship's piping or structural members.\n, • Basic understanding of acceptance/rejection criteria and different NDT inspections related to job completion.\n, • Ability to pass a written workmanship exam.\n, • Ability to write clear and concise reports.\n, • Ability to become Competent Person certified.\n, • Ability to plan and make working recommendations for system configuration changes.\n, • Ability to use mechanical and digital test equipment, take temperature readings, hand and power tools associated with metallurgy.\n, • Candidate must be willing to travel CONUS & OCONUS at times. \n\n Position located in Chesapeake, VA. To apply: VEVRAA Federal Contractor Three Saints Bay, LLC and its subsidiaries offer a team-oriented working environment and the opportunity to work with exceptional, dedicated industry professionals. We offer our employees a comprehensive benefits package and the opportunity to take part in exciting projects with government and commercial clients, both domestic and international. We are an Equal Opportunity Employer. We invite resumes from all interested parties without regard to race, color, sex, sexual preference, religion, creed, national origin, age, genetic information, marital or veteran status, disability, or any other category protected by federal, state, or local law.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Quality Technician- NDT Level II Inspector Job Code: 35062 Job Location: Norfolk, VA (on-site) Schedule: 5/40 - Monday thrugh Friday Job Description: L3 Harris is seeking an experienced NDT Level II Inspector in Visual Testing (VT) and Penetrant Testing (PT) to join our Norfolk, VA team. Essential Functions: \n • Perform Visual Testing (VT) and Penetrant Testing (PT) weld inspections. \n, • Perform welding inspections per NAVSEA and AWS standards. \n, • Oversee NDT resources across multiple facilities, providing support to sub-contract vendors, and maintaining accurate documentation. \n, • Perform inspections of work areas and other quality assessments. \n, • Review and finalize records at the conclusion of each work package for storage. \n\n Qualifications: \n • High school diploma or equivalent and 3 years of experience in Visual Testing (VT) and Penetrant Testing (PT) of welds, preferably with NAVSEA experience \n, • Proficient use of weld inspection tools, including weld gauges, NDT equipment, and micrometers \n, • Capable of interpreting technical data, blueprints, and specifications \n, • Must be a US Citizen. \n, • Ability to obtain Security Clearance required.\n\n Preferred Additional Skills: \n • ASNT Level II certification in Visual Testing (VT) and Penetrant Testing (PT) or the ability to obtain it. \n, • Experience with Costpoint or similar ERP system a plus \n, • NBPI and NACE certifications preferred but not required. \n, • Costpoint experience preferred. \n, • Excellent communication, interpersonal skills, and the ability to work independently while promoting change within the organization. \n\n #LI-IK1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures. Location Newport News, VA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

MARINE PAINTER EXPERIENCED Location: Newport News, Virginia, United States Date: Mar 11, 2026 Req ID: 46057 Team: X33 SURF PREP & TREAT DE Entity: Newport News Shipbuilding US Citizenship Required for this Position: Yes Full-Time Shift: Multiple Relocation: No relocation assistance available Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No Clearance Required: No - Clearance Not Required to Start Meet HII's Newport News Shipbuilding With more than 25,000 employees - including third-, fourth- and even fifth-generation shipbuilders - HII's Newport News Shipbuilding (NNS) division is the largest industrial employer in Virginia. We're the sole designer, builder and refueler of U.S. Navy nuclear aircraft carriers and one of two providers of U.S. Navy nuclear submarines. Our diverse and innovative team of professionals ranges from skilled trades to project managers, engineers and software developers to solution architects, technical subject matter experts, and system users. Anchored in our rich, 135-year history, we collaborate together at the forefront of technology, manufacturing, and integration of the most powerful and survivable naval ships in the world. Want to be part of the team? Apply today! We look forward to meeting you. The Role Newport News Shipbuilding, a division of Huntington Ingalls Industries, is seeking qualified marine painters, with 1+ years of hands on Marine painting work experience. A candidate should know the proper method for applying coatings while maintaining desired MIL thickness. A candidate will be working in a physically demanding environment including confined spaces and heights. A candidate should be able to use power tools, hand tools, or chemicals to accomplish cleaning of surfaces prior to applying coating systems. Nearly every component or structural element aboard ship requires specific coatings, this is why the painter is responsible for selecting and applying a wide variety of marine coating systems. Coatings protect the steel and other surfaces from rust and corrosion, protect the underwater portion from the attachment of marine life, and enhance the general appearance of the ship. The marine painter prepares the surface, masks unpainted areas, sandblasted surfaces, selects the methods of coating application and provides suitable curing conditions. In addition to modern paint techniques, the painter may work with power coating, non-skid, and other special hull treatments. The painter should have the ability to interpret paint schedules, calculate surface areas, estimate the amount of materials required, test the grade, viscosity and fineness of the paint, and perform final quality inspections. Newport News Shipbuilding offers competitive pay, weekly paychecks, paid time off, paid holidays, medical benefits including an on-site health center, 401K company match, employee discounts, and more. Click here to learn more about the trade: Must Have Candidates must able to work at extreme heights or small confined spaces. Must be able to kneel, squat, crawl, bend, stoop, and climb. Must be able to lift 40 lbs and must take and pass a respirator fit test. Must be able to work assigned shift as production needs. Must be able to work indoors/outdoors year round. Must be able to pass a Physical Agility Test. Candidates must have minimum of 2+ years paint experience. Must be able to work any of our 3 shifts Must provide up to 7 years of work history (if applicable) and all relevant paint experienced. Nice to Have High school graduate or equivalent preferred Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call 1-844-849-8463 for assistance. Press #2 for Newport News Shipbuilding.

Trident Maritime Systems, located in Newport News, VA is seeking highly experienced welders/fitters/fabricators with a strong work ethic and self-motivation. Summary As a Stainless Steel GMAW GTAW Welder/Fabricator, you will be essential in producing high-quality welded components and fabrications. Reporting to the Fabrication Supervisor, your role will involve interpreting blueprints and utilizing core skills in welding, fabrication, and hand tools. Your expertise in TIG and MIG welding will be crucial for meeting project specifications. Additionally, your premium skills in working with sheet metal and operating cranes will enhance your contributions. Join our team to ensure precision and excellence in our manufacturing processes while maintaining a safe and efficient work environment. Competitive pay and benefits package available to include health, vision, dental, life insurance, 401k and more. Must be able to pass a drug screening. Background check required. Responsibilities \n • Read and interpret blueprints and schematics to determine project specifications.\n, • Perform TIG and MIG welding on stainless steel components, ensuring high-quality fabrication.\n, • Skilled with 304, 309, 316, etc. stainless steel\n, • Utilize hand and power tools for cutting, shaping, and assembling materials.\n, • Conduct routine inspections of welding equipment and maintain a clean work environment.\n, • Collaborate with team members on construction sites to meet project deadlines and safety standards.\n, • Employ basic math skills for measurements and calculations during fabrication tasks.\n

Responsibilities: Must be able to work individually while maintaining exceptional customer service Efficient trouble-shooting and problem-solving of all common mechanical systems up to 50 tons Able to follow all Russell’s safety guidelines and customer requirements Perform preventive maintenance o

HPC-Industrial, powered by Clean Harbors, in Narrows, VA is looking for a Insite Industrial Technician to work at various customer locations, and to join their safety conscious team! This team member is responsible for the successful execution of setting up and assisting with water treatment systems, pipeline hydrostatic testing and various other responsibilities. The Insite Technician serves as representative of HPC-Industrial in creating a continuous working relationship with clients/customers. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Why work for HPC-Industrial? Health and Safety is our #1 priority, and we live it 3-6-5! Competitive wage $20.78 hourly Opportunities for growth and development for all the stages of your career Positive and safe work environments RESPONSIBILITIES Ensures Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times. Hands-on operation of manual and automated Hydro blasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized Hydro blasting and/or Chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer expectations. Conduct routine and required maintenance on the unit and all peripherals, including industrial vacuuming equipment and the disposal of hazardous and non-hazardous materials. Perform routine maintenance on company equipment being used on the job. Additional duties as assigned. Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver license and other requirements of company’s driving policy required when driving company vehicle or using personal vehicle on company business. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. QUALIFICATIONS What does it take to work for HPC-Industrial? High School diploma or equivalent (required); Shift times Monday - Friday 7 am - 3:30 pm. HPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. HPC-Industrial is an equal opportunity employer. HPC-Industrial is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-844-922-5547. HPC-Industrial is a Military & Veteran friendly company. *HPC

Hepaco is a Clean Harbors company in Richmond, VA is seeking a Field Services Technician I to join our safety conscious team. This role will be active in the field responsible for the performance of tasks associated with hazardous waste clean-up, site-remediation, equipment decontamination and handling of hazardous materials. TRAVEL / ON CALL / EMERGENCY RESPONSE Hourly Range - $20.00 - $22.00 Please note: All new hires must attend a two-week training academy; travel expenses are paid by the company Hepaco is a Clean Harbors company is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Hepaco is a Clean Harbors company? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Recruiting Pay range, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Ensure Health and Safety is the number one goal by following policies, processes, and always acting in a safe manner, • Engage in strenuous physical labor including lifting and pulling heavy objects, • Operate light and heavy equipment, handles various hand tools and powered industrial tools, works with vibration-producing tools, • Wear and properly use a variety of personal protective Equipment (PPE). Including respirators, skin, face, hand and foot protection in a multiple number of combinations, • Work in various temperatures indoors and outdoors in all weather conditions, • Work in atmospheres and locations with the potential for exposure to various chemical and physical agents, some of which may be hazardous, toxic, or corrosive, • Work in potentially elevated noise levels, confined spaces, including lifting in areas of low clearance, • Work at elevations including working from ladders and scaffolding, • Assist in field sampling activities and calibration of meters, • Climb ladders, scaffolding and into and out of trucks, tanks, and various other containers, • Work extended (> 8 hrs.) time periods, • Attend all compliance and safety update meetings, • Inspect drums for container integrity and regulatory compliance, • Safe loading and unloading of hazardous and non-hazardous waste, • Conduct waste stream sampling and profiling as necessary, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Perform other duties as assigned, • By position, ability to be on call for emergency response on rotating basis every other week, • By position, site-remediation, equipment decontamination, and the handling of hazardous materials QUALIFICATIONS • Reliable transportation, • Valid Driver’s license, • Ability to perform physical functions per Key Responsibilities, • This position includes emergency response, a continuing condition of employment is agreeing to be on-call; on occasion working on weekends and holidays will be required; emergency response situations can extend beyond 8 hours, up to 12-24 hrs., • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position, • Per OSHA's Respiratory Protection standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications: Hepaco is a Clean Harbors company is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact ___ or 1-844-922-5547. Hepaco is a Clean Harbors company is a Military & Veteran friendly company. Hepaco is a Clean Harbors company is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *HEP

Job DescriptionPipe Welder (Newport News, VA)LEAD Marine Division Newport News, VA, USAFull-Time | Contract Benefits Available Pay: • Local: $50.00/hr, • Maintain proper purge, interpass temperatures, and weld cleanliness., • Execute high-quality root, hot, and cap passes that meet QA and NDT requirements., • Support NDT inspections including VT, RT, and PT., • Perform weld repairs as directed by QA and supervision.Requirements• Successful recent pipe weld test (6G preferred)., • Strong knowledge of joint prep, consumables, purge requirements, and pipe welding techniques., • Ability to read WPS, welding symbols, and technical drawings., • HS Diploma or GED., • Must pass background check and drug screening., • Ability to work in physically demanding shipyard environments.Benefits• Medical Benefits, • Paid Sick Leave (Hours-worked eligibility requirement applies), • Paid Holidays (Hours-worked eligibility requirement applies)

Job DescriptionDescription: Capitol Boiler Works, Inc. is a well-established mechanical contracting company offering true 24/7/365 service in all mechanical crafts. CBW serves the DC Metro area and parts of West Virginia and Delaware, with offices in Springfield, VA, Richmond, VA, Hebron MD, and Baltimore, MD. Our primary focus is commercial and industrial customers in the region, with a specialty in property management companies. Capitol Boiler Works, Inc. is a privately held company serving the region since 1936. CBW is currently seeking the right individual to fill a full-time opening for Commercial Welder/Fabricator. We offer a competitive benefits package including: • Medical, • Dental, • Vision, • Life & Disability, • Supplemental Ins., • 401k, • Flexible Spending Account (FSA), • Health Savings Account (HSA) ESSENTIAL DUTIES AND RESPONSIBILITIES may include any/all of the following: • Lays out, positions, and secures parts and assembles according to specifications, using straight edge, combination square, calipers, and ruler., • Tack-welds or welds components and assembles using electric, gas, arc, or other welding equipment., • Cuts work piece, using powered saws hand shears or chipping knife., • Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form., • Installs or repairs equipment such as lead pipes, valves, floors, and tank linings., • Observes tests on welded surfaces such as hydrostatic, x-ray, and dimension tolerance to evaluate weld quality and conformance to specifications., • Inspects grooves, angles, or gap allowances using a micrometer, caliper, and precision measuring instruments., • Removes rough spots from work piece, using portable grinder, hand file or scraper., • Welds components in flat, vertical, or overhead positions., • Heats, forms, and dresses metal parts using hand tools, torch, or arc welding equipment., • Ignites torch and adjusts valves, amperage, or voltage to obtain desired flame or arc/, • Analyzes engineering drawing and specifications to play layout, assembly, and welding operations., • Develops templates and other work aids to hold and align parts., • Use safe work habits and operate safety equipment properly., • Determines equipment and welding method, applying knowledge or metallurgy, geometry, and welding techniques., • Examine workpieces for defects., • Measure workpieces with straightedges or templates to meet specifications., • Primarily uses stick welding 60-10 and 70-18. Need to be able to certify in 6G position., • Documents tests and inspection dates and results., • Maintains inventory records for welding supplies used and utilized on jobs., • Use straightedges, combination squares, rulers, and calipers to lay out, position, alight, and secure parts and assemblies prior to assembly., • Operate hand and power tools such as shielded metal arc and gas metal arc welding equipment., • Completes work orders, list materials issued and used, and documents work repairs., • Assists area staff as needed., • Ensures that management is appropriately informed of area activities and of any significant problems., • Ensures regulatory requirements and established procedures are met., • Follows safety requirements., • Ensures that work area is clean, secure, and well maintained., • Completes special projects as assigned. EDUCATION AND EXPERIENCE • High school education/G.E.D., • At least 3 years of experience in welding (Prior certification required). LANGUAGE SKILLS • Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar., • Ability to write complex sentences, using proper punctuation, and using adjectives and adverbs., • Able to communicate in complex sentences, using normal word order with present and past tenses with good vocabulary. QUALIFICATION STANDARDS • Ability to perform essential job functions consistent safely and successfully with ADA, FMLA, and other federal, state, and local standards/requirements., • Ability to meet and maintain all qualitative and/or quantitative productivity standards., • Ability to maintain reasonably regular and punctual attendance consistent with ADA, FMLA and other federal, state, and local standards/requirements., • Compliance with all personnel policies and practices., • Ability to comprehend and carry out safety sensitive duties according to company policies, procedures, and safe work practices.

Job Description HUTCO, INC. Position: Pipe Welder Job Location: Newport News, VA Start Date: 03/05/2025 Shift: Variable, 12:00 AM - 11:59 PM, Sunday - Saturday Number of Positions: 6 positions available Rate of Pay: $50.00 per hour (Per diem available for those who qualify) DESCRIPTION: Hutco, Inc. is seeking skilled Pipe Welders with a minimum of five years of commercial or naval experience. The Pipe Welder will perform multi-pass, all-position fillet and butt welds using SMAW (Shielded Metal Arc Welding) and GTAW (Gas Tungsten Arc Welding) processes on a variety of materials such as carbon steel, stainless steel, and copper nickel pipe. REQUIRED SKILLS: • Multi-Pass Welding: All position fillet and butt welds using SMAW and GTAW processes., • Welding Materials: Ability to fuse inserts and weld carbon steel, stainless steel, and copper nickel pipe., • Mirror Welding: Perform mirror welding using SMAW and GTAW processes., • Heating: Experience using Oxygen/Propane heating torch., • Physical Demands: Experience working in physically demanding environments such as shipboard, sub-assemblies, ladders, and staging., • OSHA Regulations: Familiarity with OSHA regulations related to shipbuilding., • Must be qualified to weld in all positions using SMAW and GTAW processes., • Experience with thin wall sockets (below 0.187 wall joints)., • Welders will be tested on the following qualifications:, • Welders Vision Test, • Visual Inspection of Welds (Level I), • Pre-heat and Interpass Essential Physical Demands: The role requires working in high-temperature and high-humidity environments, as well as performing physically demanding tasks. Benefits Hutco Inc. offers a limited benefit plan through Essential Staff Care. The hotel is advanced for the first two weeks (loan). Available plans include: • Medical / Prescription, • Dental Coverage, • Vision Coverage, • Short Term Disability, • Term Life Insurance, • Accidental Death & Dismemberment CONTACT HUTCO TODAY! Apply Online or at the Portsmouth Branch: ddress: 728 High Street Suite 200 Portsmouth, VA 23704 Send resumes to: Or call us at: (757) 223-7680 Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Job DescriptionPipefitter/Welder – Direct Hire Location: Ashland, VA Schedule: Monday–Friday, 7:00 AM–4:00 PM Pay: $30–$35/hr (based on experience) Travel: ~30% (project-based) Overview A well‑established industrial contractor in the Ashland area is seeking an experienced Pipefitter with welding ability to support both shop fabrication and onsite installation work. This is a direct hire role offering steady hours, competitive pay, and long‑term stability. Responsibilities • Perform pipefitting layout, cutting, threading, and assembly, • Read and interpret blueprints, isometric drawings, and schematics, • Perform stick welding (SMAW) on carbon steel piping and structural components, • Assist with fabrication of piping assemblies and mechanical components, • Install piping systems, pumps, valves, hangers, and related mechanical equipment, • Conduct system tests and quality checks, • Travel to job sites for installation and service work (~30%), • Maintain safe work habits and proper use of tools and equipmentQualifications, • 3+ years of industrial or mechanical pipefitting experience, • Proficiency with stick welding; able to pass a weld test, • Ability to read and interpret technical drawings, • Experience with hand tools, power tools, and pipe fabrication equipment, • Valid driver’s license and ability to travel as needed, • Strong mechanical aptitude and attention to detailWhat’s Offered, • Direct‑hire placement with long‑term opportunity, • $30–$35/hr depending on experience, • Consistent day shift (7 AM–4 PM), • Travel pay and per diem when working off‑site, • Stable workload with opportunities for skill growth

Job DescriptionPipe Welder (Newport News, VA)LEAD Marine Division Newport News, VA, USAFull-Time | Contract Benefits Available Pay: • Local: $50.00/hr, • Maintain proper purge, interpass temperatures, and weld cleanliness., • Execute high-quality root, hot, and cap passes that meet QA and NDT requirements., • Support NDT inspections including VT, RT, and PT., • Perform weld repairs as directed by QA and supervision.Requirements• Successful recent pipe weld test (6G preferred)., • Strong knowledge of joint prep, consumables, purge requirements, and pipe welding techniques., • Ability to read WPS, welding symbols, and technical drawings., • HS Diploma or GED., • Must pass background check and drug screening., • Ability to work in physically demanding shipyard environments.Benefits• Medical Benefits, • Paid Sick Leave (Hours-worked eligibility requirement applies), • Paid Holidays (Hours-worked eligibility requirement applies)

**$10,000 sign-on bonus for offers signed from December 1, 2025 through March 31, 2026. Terms and conditions apply** The Construction Project Manager plans, organizes, implements and completes Capital construction projects in accordance with Owner requirements. The Construction Project Manager plans and organizes the work of multiple entities including internal and external customers as well as architects and engineers. Implementation of the Design Package includes working with Purchasing and Finance to fund and bid the work. The Construction Project Manager implements the Scope of Work including interacting closely with Code officials, multiple contractors, in-house inspectors, special inspectors, end users and other intra-agency entities (Security, IT…). This position is responsible for the overall success of the project as measured by adherence to the scope of work, the budget and schedule and the satisfaction of the end users. Licensure, Certification, or Registration Requirements for Hire: None required for hire, but HCC or CHC is desirable. Licensure, Certification, or Registration Requirements for continued employment: CHC required within the first two years of employment. Experience REQUIRED: Minimum of 7 years’ experience in health care and/or institutional construction, including large, complex, and fast track projects, including those with special funding arrangements is required. In-depth working knowledge of principles and practices of architecture, engineering, cost management (estimating, budgeting, monitoring), design, construction and project management. Must possess superior written and oral communication skills and be able to interact effectively within a broad category of individuals. Ability to effectively lead or follow (and the judgment to know when to do which) project teams through the complete programming-design-bidding-contracting-construction-occupancycloseout process. Must be able to operate independently with little direct supervision and assume the role as the Owner’s representative and effectively apply the above knowledge, skills and abilities. Experience PREFERRED: Professional certification in one’s field (AIA, PE, CMAA…) is also preferred. Education/training REQUIRED: Must possess a high school degree or its equivalent. Education/training PREFERRED: A Bachelor degree in architecture, engineering or a directly related field is highly desirable. Independent action(s) required: Project Manager is responsible for tracking budget adherence, monitoring construction schedule fulfilment, monitoring the construction site’s adherence to the owner’s infection prevention requirements, and be able to identify and address scope creep. Supervisory responsibilities (if applicable): Oversees the daily work activities of General Contractor’s, as well as project schedule and budget adherence. Additional position requirements: Project Managers may be required to be on the project construction site some nights and weekends depending on the type of project being done. Age Specific groups served: N/A Physical Requirements (includes use of assistance devices as appropriate): Physical Lifting 20-50 lbs. Activities: Prolonged standing, Prolonged sitting, Frequent bending, Walking (distance), Climbing (steps, ladder, other), Reaching (overhead, extensive, repetitive), Repetitive motion Mental/Sensory: Strong recall, Reasoning, Problem solving, Hearing, Speak clearly, Write legibly, Reading, Logical thinking Emotional: Fast pace environment, Steady pace, Able to handle multiple priorities, Frequent and intense customer interactions, Noisy environment, Able to adapt to frequent change Days EEO Employer/Disabled/Protected Veteran/41 CFR 60-1.4.

Job Description CTR Group is seeking an Industrial Pipe Welder for a Plant in the Hopewell, VA, area. Immediate opening and urgently hiring! Pipe Welders will be working 50 hours per week for now and will be working 7 days per week toward the end of May. Pay Rate: $36 per Hour plus $140 Per Diem for Non-Local Candidates. SUMMARY: We are seeking seasoned Industrial Pipe Welders / Road Techs who will be working 50 hours per week right now but will be working 7 days per week toward the end of May at various job sites, several of which are in Hopewell. Pipe Welders must be able to pass an X-Ray quality weld test-TIG & Stick REQUIREMENTS: • Must have Industrial Pipe Welding experience., • Must be able to pass an X-Ray quality weld test-TIG & Stick, • Able to travel to various work sites in Hopewell and surrounding area. CTR Group has been a leader in its industry for over 35 years and is rated highly on Google, Indeed and Facebook for being a great company to work for. If you enjoy being a part of a great team, apply today and check out our website for more information. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified. Company DescriptionCTR group is a full-service employment & recruiting firm, matching the strengths and skills of thousands of candidates with employers. group is a full-service employment & recruiting firm, matching the strengths and skills of thousands of candidates with employers.

Job DescriptionJob Title: Fitter/Fabricator Job Summary: We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our Tangent, OR facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1” thick coupon., 2. Operate air arc to remove steel (back gouging)., 3. Grind with 90°ree; angle grinder., 4. Read weld symbols and check weld size using weld fillet gauges., 5. Heat material to required temperature using temperature sticks and heating torch/cutting torch. (read and follow pre-heart & interpass temperature tables.) 7. Set machines according to procedure charts., 8. Use air chipper to chip of slag., 9. Use natural gas propane heaters to pre-heat steel., 10. Operate stud welder., 11. Follow weld procedures as it applies to volts, amps & wire feed speed., 12. Heat, straighten and be able to know when to use pre-heat to offset distortion., 13. Perform other duties as required by management. Shift Times: Swing Shift: 4:30pm-3:00am Qualifications and Requirements Required: Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years’ experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90°ree; angle grinder, crane, heating torch, cutting torch. Job Type & Location This is a Contract to Hire position based out of Emporia, VA. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We are seeking a WELDERS to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Night Shift is a priority in this round of hires. Candidates open to night shift will be moved to the top of the list. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workloadCompany DescriptionS.P. Kinney Engineers, Inc. is a family owned and operated engineering and manufacturing company that is located in Pittsburgh, PA with a satellite manufacturing facility in Richmond, VA. Selwyne Perez Kinney opened the company’s doors in 1941 in Pittsburgh with a focus on manufacturing equipment for the American Steel Industry. He was a graduate of the University of Utah with degrees in metallurgy and chemical engineering. He was a member of many engineering associations, and through the years he was the recipient of many awards for his contributions to the iron and steel industries and his extensive experimental studies with the U.S. Bureau of Mines. In 1976, his son Rol Frank Kinney took over the company. By this time S.P. Kinney was still heavily involved with the steel industry, but it was branching out into other industries with our water filtration lines. Craig Selwyne Kinney took over the company in 2001, and he has been running it ever since. Today our focus is on making quality American-Made blast furnace equipment for steel mills around the world and water filtration equipment for any and all industries incorporating raw water or recirculating water in their facilities.S.P. Kinney Engineers, Inc. is a family owned and operated engineering and manufacturing company that is located in Pittsburgh, PA with a satellite manufacturing facility in Richmond, VA. Selwyne Perez Kinney opened the company’s doors in 1941 in Pittsburgh with a focus on manufacturing equipment for the American Steel Industry.\r\n\r\nHe was a graduate of the University of Utah with degrees in metallurgy and chemical engineering. He was a member of many engineering associations, and through the years he was the recipient of many awards for his contributions to the iron and steel industries and his extensive experimental studies with the U.S. Bureau of Mines.\r\n\r\nIn 1976, his son Rol Frank Kinney took over the company. By this time S.P. Kinney was still heavily involved with the steel industry, but it was branching out into other industries with our water filtration lines. Craig Selwyne Kinney took over the company in 2001, and he has been running it ever since.\r\n\r\nToday our focus is on making quality American-Made blast furnace equipment for steel mills around the world and water filtration equipment for any and all industries incorporating raw water or recirculating water in their facilities.

Job DescriptionJob SummaryWe are seeking an experienced Pipe welder to join our team. In this role, you will work in various industrial settings. The ideal candidate must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail, and demonstrate problem-solving skills. Responsibilities • Inspect and ensure pipe is correctly prepared to make an X-ray quality weld, • Complete welds in shop and field in all positions, • Use a variety of hand and power tools, • Work with other construction professionals to complete projects, • Follow all safety guidelines, • Complete all welds in a timely matterEmployment requirements, • Minimum of 3 years of experience as a Pipe Welder, • Have own tools available for daily use, including Stinger, Tig Rig, regulator, welding hood, and bucket, • Ability to pass 2-inch Schedule 80 6G pipe test in carbon and stainless steel, • High School Diploma or equivalent (experience may be substituted for education), • Legally eligible to work in the United States, • Possess current, valid driver’s license (not under suspension or limitation), • Have the transportation means to report to multiple job sites as assigned, • Ability to pass pre-employment and random drug tests throughout employmentJob qualifications, • Ability to communicate effectively in English (verbal and written), • Knowledge of how mechanical equipment works, • Knowledge of all relevant health and safety guidelines, • Ability to meet the physical demands of the position, including lifting heavy objects and withstanding temperature extremes found in boilers, paper machines, manufacturing facilities, etc., • Ability to work Monday-Friday with occasional overtime during afternoons, evenings and weekends as neededBenefits/Compensation, • Benefits available after 90-day probationary period, • Competitive pay based on experience and capabilities

Job DescriptionDescription: The Welder/PipeFitter is responsible for the installation and repair of industrial Boilers and Compressed Air Systems. Requirements: ATTEND REQUIRE VENDOR TRAINING AND COMPANY SPONSORED CLASSES MAINTAIN TRUCK STOCK INVENTORY- REPAIR PARTS, RELATED RECORDS CONCERNING TIME, LABOR, MATERIAL LOGS OF TASKS PERFORMED, AND MAINTAIN INTERIOR AND EXTERIOR VEHICLE CLEANLINESS PREPARE SERVICE TICKETS FOR ALL WORK PERFORMED ASSIST INSIDE SALES OR SALES BY IDENTIFYING AND REPORTING SALES LEADS, TRAINING LESS EXPERIENCED PERSONNEL DRIVE IN A MANNER THAT ADHERES TO TATE’S FLEET SAFETY PROGRAM JOINS, FABRICATES, AND REPAIRS METAL AND OTHER WIELDABLE MATERIAL, AND ANCILLARY EQUIPMENT BY APPLYING APPROPRIATE WELDING TECHNIQUES ENSURES PROPER FUNCTION AND SAFE OPERATION OF THE EQUIPMENT BY RECOMMENDING WELDING TECHNIQUE, ARRANGEMENT, AND ASSEMBLY OF PRODUCT THROUGH ANALYZING ENGINEERING DRAWINGS AND SPECIFICATIONS. UTILIZE MIG/TIG STICK WELDING TECHNIQUES AS WELL AS BRAZING AND SOLDERING, PIPEFITTING, RIGGING AND OTHER MECHANICAL TECHNIQUES.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Springfield, VA. Most positions are first shift with a pay scale of $35-40/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Perform Quality Checks (Inspection and Testing), • Repair Welding, • Pipe & Mechanical, • Fabricating, assembling and repairing structures, • Basic Tools for the Trade, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description We are seeking Welder (Combo) – Local to Richmond, VA to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Perform tack welding on pipe joints, fittings, flanges, and valves per WPS requirements, • Align, fit, and secure pipe sections using clamps, wedges, and fixtures, • Read and interpret blueprints, isometrics, and weld symbols, • Verify pipe dimensions, bevels, and root openings prior to tacking, • Ensure proper orientation and elevation of pipe runs, • Assist full-weld pipe welders as needed, • Inspect tack welds for accuracy, penetration, and defects, • Follow all safety procedures and jobsite regulations, • Maintain tools, equipment, and a clean work area Qualifications: • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workloadCompany DescriptionAt KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.At KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.

Job Description CTR Group is hiring Steel Fluxcore Welders - Shop Welding, for a Metal Fabrication Shop in the Hampton, VA, area: Pay Range: $28 - $32 per Hour plus Benefits. SUMMARY: We are currently seeking skilled Steel Flux Core Welders. As part of our team, you will have the opportunity to showcase your expertise in crafting large structural fixtures for the US Navy and various industries in a work environment that is team-oriented, supportive, and focused on quality. Responsibilities: • Read and comprehend blueprints, sketches, and templates., • Efficient with cutting torches, burning, and plasma torches., • Clean and prepare surfaces to be welded., • Must pass a FLUX CORE weld test., • Minimum of 3-5 years of welding experience in the fabrication industry., • Proficient in steel Fluxcore welding. CTR Group has been a leader in its industry for over 35 years and is rated highly on Google, Indeed and Facebook for being a great company to work for. If you enjoy being a part of a great team, apply today and check out our website for more information. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified. Company DescriptionCTR group is a full-service employment & recruiting firm, matching the strengths and skills of thousands of candidates with employers. group is a full-service employment & recruiting firm, matching the strengths and skills of thousands of candidates with employers.

Job Description We are seeking a Combo Pipe Welder – Richmond, VA (Local Only) to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Conduct tests to evaluate weld quality and tolerance Qualifications: • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workloadCompany DescriptionAt KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.At KODIAK, we are dedicated to helping craft professionals build successful and rewarding careers in the construction industry. Whether you’re an experienced electrician, welder, millwright, or you’ve honed your skills in another trade, we can provide access to steady local and travel-dedicated employment, competitive pay, and opportunities to work on large-scale, high-profile construction projects across the U.S.

Job Description At ACI we build our company and our culture not by counting people, but by making our people count! Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: • $0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE!, • Dental Insurance Plan, • Vision Insurance Plan, • 401(K) Retirement Plan with Generous Company Matching, • Health Savings Plan with Generous Company Matching Summary/Objective: The HVAC Service Technician will exhibit proficiency in servicing, troubleshooting, repairing and cleaning of heating and cooling equipment and related systems (i.e., boiler, forced air, hydronic, split systems, package units, make up air and exhaust systems, controls) on all types of HVAC Systems. Essential Functions: • Services products and equipment related to HVAC commercial systems and ensuring customer satisfaction, • Performs repairs, overhauls, and start-ups of commercial boiler and HVAC systems, • Follows blueprints, wiring diagrams, piping schemes or engineering specifications, to diagnose and repair units, • Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers, • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary, • Maintains vehicles by keeping records of service manuals, scheduling, and completing repairs and maintenance service, • Documents work by completing paperwork on each job and maintaining files, • Keeps all current manufacturers' products concerning installation, operation, maintenance, service, and repair, • Provides technical support to customers Required: • 2+ years of experience in commercial HVAC industry or residential field; or equivalent combination of vocational training and experience, • Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail, and demonstrate problem-solving skills, • Knowledge of basic electricity, electrical and control systems, • Ability to read, understand, and work from blueprints, specifications, and schematics Must be able to pass post-offer pre-employment drug screen, and may be required to satisfactorily complete additional background checks as required (i.e. DMV, criminal history), • Must adhere to all company policy and procedures Work Environment: • May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold, and dampness, • May work in areas with exposure to moderate/high noise levels, • May be exposed to fumes or airborne particles including dust, • This role routinely uses construction equipment such as heavy machinery, hand and power tools, • While performing duties of the job the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for long periods of time and lift up to 50 lbs., • Frequently is required to use hands to finger, handle or feel objects, tools or controls; and reach with hands and arms, • HVAC Journeyman/Master certification, • Prior military experience HVAC, HVAC Service Tech, Start Up Commissioning

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. FhnitOXe6p

Job DescriptionSalary: $32.16/hr Summary Welders are responsible for performing welds in multiple positions using a variety of processes in accordance with NAVSEA-approved procedures, in a safe and efficient manner. Responsibilities include operating, maintaining and troubleshooting welding and cutting equipment, preparing components through precise layout and fitting, and conducting quality inspections. 1st Class Mechanics are expected to independently receive assignments, plan the work, identify material requirements, and execute tasks efficiently and accurately. Duties & Responsibilities • Wear required personal protective equipment (PPE) and always adhere to all OSHA safety standards and Tcnico safety policies., • Must adhere to all applicable safety, technical, and regulatory guidelines, including but not limited to:, • Company policies and procedures, • Local, state, and federal regulations, • ABS, NAVSEA Standard Items, and MSC GTRs, • MIL-STD (e.g., 22D, 248, 278, 271, 1689, 2035), • General Specifications for Overhaul of Ships, • Perform advanced welding in multiple positions (2G, 3G, 4G, 6G) using various processes (GTAW, GMAW, FCAW, GMAW-P, SMAW) in compliance with NAVSEA-approved procedures and specifications., • Conduct quality control checks using precision gauges and ensure all work meets NAVSEA standards; inspect finished welds for defects and conformance., • Operate and maintain welding tools and equipment, including manual/semi-automatic systems, hand and power tools, and cutting equipment (e.g., wire feeders, carbon arc rigs, tig rigs, mig/flux core guns CAC-A)., • Prepare and align components for welding through layout, measuring, beveling, and fitting while monitoring for distortion or heat-related issues., • Possess and maintain personal tools/equipment necessary to accomplish their trade., • Troubleshoot equipment and material issues, change out wire spools, tips/nozzles or adjust, and notify management when replacements are needed., • Must be proficient at reading and interpreting weld symbols on blueprints and drawings., • Conduct self-inspections to ensure work meets quality standards and complies with applicable drawings and specifications., • Provide guidance and train junior craftsmen, providing direction as a senior mechanic when required., • Maintain a good attendance record, demonstrate a positive and professional attitude, work well with others, take pride in your work, and be receptive to constructive feedback from mentors (supervisor, PMT, etc.). Certification Requirements • Must be qualified in 3-position SMAW carbon steel plate and 3-position FCAW carbon steel plate., • Hold a carbon arcing qualification, plus one additional SMAW certification (not carbon steel) and one additional FCAW plate certification (not carbon steel)., • Hold a SMAW 110-18 6GT Pipe certification, and either a GMAW-P Aluminum certification or 3 SMAW and 3 FCAW pipe/plate certifications. Experience Requirements • Must be able to work in various environmental conditions including outdoor weather, heights, confined spaces, loud noise, and exposure to airborne particles or fumes., • Must be able to wear a respirator as required for specific tasks and maintain compliance with fit testing and respiratory protection protocols., • Regularly required to sit, reach, and use hands for handling or operating tools and equipment., • Occasionally required to stoop, bend, squat, crawl, and climb ladders or structures (e.g., masts, tanks, voids)., • Must be able to lift and move up to 50 lbs. independently and seek assistance for heavier loads., • Must be able to pass Drug Screening, Work Ability Screening., • Must be able to obtain a Government facility security pass and badges at the various shipyards Tcnico works at (e.g., MHI, BAE, NASSCO, HII)., • Availability to work overtime, weekends, or travel to alternate worksites when project needs demand., • Perform other duties as assigned.

Job Description About the Role: The Welder/Former plays a critical role in the fabrication and assembly of metal structures and components, ensuring that all welding and forming tasks meet stringent quality and safety standards. This position requires precision and expertise in interpreting blueprints, technical drawings, and specifications to produce durable and accurate metal products. The Welder/Former will collaborate closely with engineering and production teams to optimize manufacturing processes and troubleshoot any issues that arise during fabrication. Attention to detail and adherence to safety protocols are paramount to prevent defects and maintain a safe working environment. Ultimately, this role contributes significantly to the successful completion of projects by delivering high-quality welded and formed metal parts on schedule. Minimum Qualifications: • High school diploma or equivalent., • Proven experience as a welder and metal former in a manufacturing or fabrication environment., • Ability to read and interpret technical drawings and blueprints., • Experience with multiple welding processes including MIG, TIG, and stick welding., • Certification in welding (e.g., AWS Certified Welder) or equivalent recognized credential., • Familiarity with CNC metal forming machinery and programming., • Completion of an apprenticeship or formal training program in welding and metal fabrication., • Basic understanding of metallurgy and material properties., • Read and interpret blueprints, drawings, and specifications to determine welding and forming requirements., • Perform various welding techniques such as MIG, TIG, and arc welding to join metal parts according to project specifications., • Operate metal forming equipment including presses, rollers, and bending machines to shape metal components accurately., • Inspect welded and formed parts for defects and ensure compliance with quality standards and safety regulations., • Maintain welding and forming equipment, performing routine maintenance and troubleshooting as needed., • Collaborate with team members to plan and execute fabrication tasks efficiently and meet production deadlines. The required skills enable the Welder/Former to accurately interpret technical drawings and execute precise welding and forming tasks, ensuring the structural integrity of metal components. Proficiency in various welding techniques allows the candidate to select and apply the most appropriate method for each project, enhancing product quality and durability. Knowledge of safety standards is essential to maintain a hazard-free work environment and protect both the individual and team members. Preferred skills such as CNC machinery operation and familiarity with metallurgy further enhance efficiency and the ability to handle complex fabrication challenges. Daily use of measuring tools and equipment maintenance skills ensures consistent production quality and minimizes downtime.

Job Description Description Study building plans and working drawings to determine work aids required and sequence of installations Locate and mark position of pipe and pipe connections and passage holes for pipes in walls and floors using necessary tools (i.e., ruler, spirit level, and plumb bob) Cut and thread pipe, using necessary tools (i.e., pipe cutters, port-a-band saw, reciprocating saw, torch, pipe-threading machine) Assemble and install valves, pipe fittings, and pipes composed of metals (I.e., iron, steel, brass, copper, glass, vitrified clay, and plastic) using hand tools and power tools Join pipes by use of proper supplies (i.e., screws, fittings, solder, brazing, grooving, plastic solvent, welding wire) Work safely, encourage others to do so, and comply with applicable health and safety-related rules, regulations, and procedures and practices Job Duties: -Welders will be welding 4-20 inch carbon steel pipe -Welding pipes/metals - Mig, Tig and Stick -Installing pipe and pipe fittings -Securing pipes to structure with clamps, brackets, and hangers -Reading and interpreting blueprints -Testing piping systems for leaks, etc. Skills Pipe fitting, Blueprint, Welding, Industrial, Pipe welding, Piping, Weld, Construction, Fitting, Pipe installation Top Skills Details Pipe fitting,Blueprint,Welding,Industrial,Pipe welding,Piping Additional Skills & Qualifications Work experience as a Pipefitter for commercial construction projects. (Journeyman level experience is preferred, but not required) Experienced with layouts and ability to read and work from drawings Ability to direct the work of a helper or apprentice Knowledge of pipefitter equipment, power tools, and fabrication methods Knowledge of different types of pipe, valves, fittings, and their functions Knowledge of basic construction/shop math A reliable source of transportation to and from work Experience Level Entry Level Job Type & Location This is a Contract to Hire position based out of Richmond, VA. Pay and Benefits The pay range for this position is $26.00 - $31.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Richmond,VA. Application Deadline This position is anticipated to close on Mar 31, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Travel Pipe Welder - Newport News, VA $140 per diem + $50/hr Job Description Seeking a skilled Pipe Welder with a minimum of five years commercial/naval experience. The ideal candidate will be capable of performing multi-pass, all position fillet and butt welds using SMAW and GTAW processes, including the ability to fuse inserts and weld various materials such as carbon steel, stainless steel, and copper nickel pipes. Candidates should be prepared for physically demanding tasks in various environments including shipboard, sub-assemblies, ladders, and staging, and must be familiar with OSHA regulations relevant to the shipbuilding industry. Hard Skills • SMAW (Shielded metal arc welding), • GTAW (Gas Tungsten Arc Welding), • Mirror Welding, • Pipe Welding Work Site This is a fully on-site position in Newport News, Virginia. Work Environment Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Newport News,VA. Application Deadline This position is anticipated to close on Apr 3, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We offer clients a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the Securitas Technology Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets. Our service teams are responsible for providing service on Securitas Technology products at client sites. The position provides client contact for all post-installation problems on systems and equipment, as well as, special project work, when needed. Job Duties • Respond to trouble tickets to ensure application uptime and system performance., • Work individually and as a team to diagnose and resolve application issues., • Execute preventative maintenance tasks to maximize application availability and identify system faults., • Perform routine configuration changes (user permissions, application configuration, etc.), • Document all system modifications through a digital change control tracking system., • Produce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audience., • Perform pre-deployment end to end testing of all upgrades and major modifications., • High School diploma required or equivalent., • Experience installing and troubleshooting low voltage equipment, • Strong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarms, • Fire alarm experience:, • Bosch, Silent Knight highly preferred, • Simplex, Notifier, Edwards, Siemens, or other commercial fire systems a plus, • NICET certification or State Fire License preferred, • ESA Certified Alarm Technician preferred, • NTS Certified Service Technician preferred, • Working knowledge of network communications and IP addressing, • Certifications in enterprise grade CCTV, Access Control a plus, • Strong working knowledge of Microsoft Office, • Strong written and verbal communications skills, • Excellent problem solving and analytical skills., • Excellent time management skills, • Paid company training, • Medical, Dental, Vision, and Life Insurance, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Company vehicle, laptop, and cell phone provided, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job Description If you’ve ever considered a career in maintaining heavy machinery, join the Army National Guard as a Construction Vehicle Repairer and help pave the way for success. In this role, you will maintain trucks, bulldozers, power shovels, and other heavy equipment needed for construction operations. As a Construction Vehicle Repairer you will maintain and replace brake actuators, batteries, starter motors, alternators, mechanical fuel pumps, and hydraulic cylinders; adjust engine speed governor/valves, carburetors, dry-disc clutches, steering brakes, and fuel injector racks; charge suspension accumulators, transmission shift accumulators, and main hydraulic accumulators; troubleshoot problems in vehicle engines, electrical systems, steering, brakes, and suspensions; tune up and repair engines; replace or repair damaged body parts, hydraulic arms, shovels, and grader blades; and establish and follow maintenance schedules. Job Duties • Service drive shafts, universal joints, service brake shoes, water pumps, and turbochargers, • Maintain and replace cylinder heads, high-pressure fuel injection pumps, and road wheels Some of the Skills You’ll Learn • Repair and replace body panels, fenders, and radiators, • Troubleshoot hydraulic systems Helpful Skills • Interest in math, electricity, and shop mechanics, • Interest in electric motors and appliances Through your training, you will develop the skills and experience to enjoy a civilian career at service stations, auto and construction equipment dealers, farm equipment companies, and state highway agencies. You can also consider a future as a garage mechanic, carburetor mechanic, transmission mechanic, construction equipment mechanic, or endless track vehicle mechanic. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for a Construction Equipment Repairer consists of 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 8 weeks of Advanced Individual Training. Part of this time is spent in the classroom and part in the field. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability. Email me jobs like this

Persons employed as a GSE Mechanic is expected to: • Inspect and maintain ground support equipment used in operations., • Troubleshoot, repair and/or overhaul ground support equipment., • Check and service ground support equipment with fuel, water, oil and hydraulic fluid., • Diagnose problems using test equipment and applicable manuals., • Build and assemble machines or mechanical components according to requirements., • Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues., • Conduct repairs aiming for maximum reliability., • Perform thorough maintenance on machinery, equipment and systems., • Clean and apply lubricants to machinery components., • Replenish fluids and components of engines and machinery., • Provide consultation on correct maintenance and preventative measures to machine or vehicle users., • Keep logs of work and report on issues The following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines). • Frequently lift and/or move up to 75 pounds., • Read, write and fluently speak and understand the English language., • Ability to read and comprehend instructions, short correspondence and memos., • Write routine business correspondence., • Effectively present information in one-on-one and small group situations to customers, clients, supervisor and employees., • Deal with problems involving several concrete variables in standardized situations., • Apply common sense understanding to carry out detailed but uninvolved written or oral instructions., • Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals., • Excellent knowledge of machinery and hydraulic, electrical and other systems and their components, • Aptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers), • Ability to follow established procedures and practices and read instruction, blueprints etc., • A strong commitment to all health and safety guidelines, • Very good communication skills, • A problem-solving ability, • High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experience, • Minimum of 18 years of age, • Ability to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies., • Must be legally authorized to work in the country of employment., • Prior GSE or heavy equipment experience preferred., • Must have your own tools., • Must possess valid driver’s license., • Certification from a vocational school or completion of apprenticeship is a definite plus. With more than 225 locations worldwide, Signature Aviation is the largest global network of private aviation terminals, delivering safe, convenient, and elevated experiences to those we serve. As a premier hospitality organization and a certified Great Place to Work™, we are committed to redefining private air travel. Our nearly 6,000-strong team of aviation experts and enthusiasts is dedicated to delivering excellence to our guests and communities, and it starts with taking care of our team. Signature provides a variety of benefits, programs, and resources to support our team members’ overall well-being and professional development. We proudly volunteer and give back, focusing on elevating the neighborhoods where we operate, empowering the next generation of aviation professionals, and supporting our veterans. From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation. Our Benefits: • Medical/prescription drug, dental, and vision Insurance, • Health Savings Account, • Flexible Spending Accounts, • Life Insurance, • Disability Insurance, • 401(k), • Critical Illness, Hospital Indemnity and Accident Insurance, • Identity Theft and Legal Services, • Paid time off, • Paid Maternity Leave, • Tuition reimbursement, • Training and Development

Job Description Qualifications • Virginia State Inspector license • Strong communication and multitasking abilities • Comfortable using shop management software ( Tekmetric, etc.) • Positive attitude, professional appearance, and strong attention to detail • Valid driver’s license with clean driving record What We Offer • Competitive hourly pay + commission • Paid time off and holidays • Employee discounts on parts and services • Supportive, family-oriented work environment • Opportunities for advancement and ongoing training

Ability to work various shifts and days including nights, weeknds, and holidays to meet business needs.Landscapers perform various landscaping tasks throughout the park, as well as ensure landscaped areas meet standards and use tools and equipment to improve the physical appearance of the park.Plus,

As a Seaonal Plumber's Helper, you will assist in the operation, maintenance and inspection of swimming pools, water slides and other related equipments as required to support the operation of Soak City!.Assists Plumbers as needed in Soak City Waterpark.Records readings from water meters each hour.C

HealthTrust Workforce Solutions Local is seeking a per diem / prn nurse RN Labor and Delivery for a per diem / prn nursing job in Richmond, Virginia. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Duration: Ongoing, • Employment Type: Per Diem Posted rates reflects the maximum rate, including night and weekend shift differentials Entrust Your Career to HealthTrust! At HealthTrust, we believe that healthcare is not defined by the four walls in which it is practiced; it’s defined by its people. We pride ourselves on crafting opportunities that expand skill sets, broaden career horizons, provide economic stability, and cultivate personal growth. HealthTrust Offers: • Getting to know HCA facilities within 50mi of home zip code, • Self scheduling through our Mobile GO HWS App, • Minimum of just three shifts a month, however, you can work more!, • 401K Matching, • Weekly pay every Friday, • Not required to work weekends, • Not Required to work holidays To get started, you will need: • RN's a minimum of 1 year in specialty, • Allied 6 months of experience, • An adventurous spirit and fierce dedication, • Degree in corresponding specialty as required, • Appropriate certifications for the specific position HealthTrust Benefits: • Opportunities for a lifetime: When you become a part of the HCA family, you will have exclusive access to more opportunities than any other healthcare system in the nation. At HWS, we help open the door to a lifetime of lasting career opportunities., • A culture of care: Our clinicians have made HWS an industry leader for over 25 years. We are passionate about our mission that, above all else, we are committed to the care and improvement of human life., • Career Development: As a wholly owned subsidiary of HCA Healthcare, HWS is a preferred partner to thousands of top-performing hospitals. We provide our healthcare professionals with first-priority access to more than 200,000 jobs nationwide. We are uniquely positioned to offer you exclusive and direct access to HCA Healthcare’s vast network of facilities. Let us open the door to nationwide opportunities that fit your lifestyle!, • Certifications\n\n, • ACLS (Required)\n, • AWHONN (Required)\n, • NRP (Required)\n

We know you have a choice about where you work, and we’re excited that you are considering a career with Levco Management.Are you looking for a company with a hands-on approach, a strong support system, and dedication towards promoting from within? If so, we may be a great fit for you! A huge part

Job Description We are seeking a Quality Control Inspector to join our team! You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency. Responsibilities: • Perform thorough examinations of all materials and finished products, • Conduct and report internal audits and evaluations, • Implement and improve quality control operating procedures, • Identify and troubleshoot equipment problems and defects, • Participate in routine visual inspections, • Previous work experience in quality control or other related fields, • Strong attention to detail, • Strong analytical and critical thinking skills