Trabajos diesel mechanic en Albuquerque, New MexicoCrear alertas

Job Description The primary role of the Mechanic is to diagnose and repair fleet and equipment in order to optimize the needs of operations and minimize equipment down time. Essential Responsibilities • Inspect, diagnose, adjust and repair power train, electrical, suspension, brake, hydraulic and air systems on vehicles and equipment., • Assist in execution of preventative maintenance program by performing oil and fluid changes, tire rotations, brake inspections, CHP BIT inspections, etc., • Perform on-road emergency service calls., • Make recommendations for parts, equipment and fabrication orders., • Utilizes vehicle computer electronics systems to interpret failure modes to initiate repairs., • Utilize fleet management software to perform data entry, maintain accurate records and prepare various reports upon request, paying close attention to accuracy and detail., • Utilize service manuals as well as online technical resources, service literature and diagnostic software., • Observe and comply with hazardous waste and material handling and disposal procedures and regulations as set forth by local, state and federal environmental and health agencies., • Observe and comply with all applicable safety regulations, rules, policies and procedures., • Maintain clean, safe and organized work space., • Maintain collaborative working relationship with drivers, operators and coworkers and communicate timeline for downed vehicles., • Mentor and provide assistance to Mechanic Trainees., • Participate in external, Department and Company-wide trainings to increase skill sets and improve service. Knowledge, Skills & Abilities Knowledge of: • Diesel and/or compressed natural gas engines, heavy equipment mechanical components and parts., • Methods, tools, equipment and systems used in the inspection, diagnosis and repair of trucks and heavy equipment., • Vehicle computer diagnostic systems and fleet management software., • Federal, state and local job site health and safety rules, regulations and best practices. Ability to: • Maintain a positive attitude with coworkers., • Proactively establish trust and credibility with coworkers by maintaining accountability., • Contribute to the team dynamic by promoting inclusion, support and collaboration amongst coworkers., • Take initiative, self-manage time and productivity through multitasking., • Effectively and concisely communicate both orally and in writing., • Think independently and creatively to problem solve. Education, Training & Experience, • One year of related experience servicing diesel engines required., • High school diploma or GED preferred., • Experience in the resource recovery industry a plus., • Certifications a plus., • Class B license a plus., • Must supply own tools. Supplemental Information Universal Waste Systems, Inc. celebrates diversity and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status. This description is not intended and should not be construed to be an exhaustive list of all responsibilities, skills, effort, work conditions, and benefits associated with the job.

Position Description Ryder is hiring an experienced Mid-Level Diesel Technicianin Albuquerque, New Mexico — offering weekly pay, excellent benefits, and a Technician career you can feel good about. Hear it from a Ryder Technician Employee Here: https://RyderCareers.Video/JessicaT2 • Hourly Pay: $26.00 per hour, • Certification Bonus of $100 for each New ASE Certification Obtained up to $700, • Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year, • Schedule: Tuesday–Saturday, • Hours: Second Shift 3:30 pm – 12:00 am - Saturday 8:00 am - 4:30 pm We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles. Apply Here with Ryder Today Spots are filling fast — click apply now to secure your spot. Questions? Call “Aubrey” or text “Albuquerque” to 904-420-7747 to speak with your recruiter today. All the benefits you expect — without the wait. • Medical, Dental, Vision after 30 days, • 80 hours PTO your first year, starting Day 1, • Yearly merit pay increases, • 401 (k) company match, • PPE, uniforms, and boot allowance, • Build your skills - paid training, • Safety‑first workplace & State-of-the-art equipment, • Top Tech Competition: Earn $250 – $50,000 per year, • U.S. military veterans - extra paid day off, • 15% company stock discount, • Up to $5,000 in Tech tuition repayment, • 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure), • Employee discounts on tools, vehicles, travel, tech & more Click Here to See All Ryder Careers:https://www.ryder.com/careers/diesel-technicians We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more! EEO/AA/Female/Minority/Disabled/Veteran Requirements • High school diploma or equivalent preferred, • Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred, • Basic tools, required, • Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:, • Routine preventative maintenance, which should include oil changes, brake and tire work, required, • Two (2) years or more of a combination of classroom training and work experience in required experience, preferred, • Valid Commercial Driver License (CDL) CLASS A,preferred, • This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:, • Must be able to obtain CDL within 6 months after hire, • Pass a Ryder Drug Test, • Pass a DOT physical, • Pass a Ryder road test, • Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Responsibilities • Performs vehicle maintenance and repair duties, • Performs standard vehicle maintenance, • Performs standard component inspections and repairs, • Performs preventive maintenance, • Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable, • Identifies root cause of basic failures/conditions and perform repairs as required, • Replaces defective components as instructed, • Performs facility maintenance duties, • Interacts with customers/drivers to properly determine nature of complaint once assigned a task, • Utilizes key functions of Shop Management System and electronic documentation available, • Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT), • Performs other support duties as required to support operations. These could include but are not limited to Service Island support Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Posted Date 4 days ago (9/25/2026 3:23 PM) Requisition ID 2026-211577 Location (Posting Location) : State/Province NM Location (Posting Location) : City ALBUQUERQUE Location (Posting Location) : Postal Code 87107 Category Technicians/Service Employees4 Employment Type Regular-Full time Travel Requirements 0-10% Position Code 1000120 Min Pay USD $26.00/Hr. Max Pay USD $26.00/Hr.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 11 states, and we have over 1,600 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace SUMMARY OF DUTIES: Greet customers and initiate the write up process. Determine the customer’s needs and convey this information onto the repair order. Must be able to communicate well in order to document enough information to properly diagnose the vehicle. Responsible for providing supporting documents to determine warranty coverage and open campaigns. Document requests by the customer such as determining method of payment, arrangements to pick up or deliver the vehicle, authorizations, purchase order numbers and any other job functions as required. Acquire customer approvals, provide estimates, book & close all service tickets considered as waiters. Assist with closing other repair orders as needed. Answer incoming service phone calls. Maintain product knowledge as the Liaison between the Service Department and the customer. MARGINAL TASKS: Must be willing to do other miscellaneous tasks as required by and related to the business. SPECIAL REQUIREMENTS: • Must have good communication skills and the ability to interact well with customers, vendors and co-workers in a positive and constructive manner., • This is a safety-sensitive position for which impairment while on the job would present a substantial risk. As a condition of employment, the applicant must submit to pre-employment testing for marijuana. The position is exempt from the state law prohibiting preemployment testing for cannabis use. PHYSICAL REQUIREMENTS: Must be able to pass physical, including drug test. Must maintain a professional appearance. Involves essential ability to climb around, on and under trucks in order to properly inspect and diagnose all types of problems and repairs. Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company,Proud that our 1600+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 12 states, and we have over 1,500 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace SUMMARY OF DUTIES: Greet customers and initiate the write up process. Determine the customer’s needs and convey this information onto the repair order. Must be able to communicate well in order to document enough information to properly diagnose the vehicle. Responsible for providing supporting documents to determine warranty coverage and open campaigns. Document requests by the customer such as determining method of payment, arrangements to pick up or deliver the vehicle, authorizations, purchase order numbers and any other job functions as required. Acquire customer approvals, provide estimates, book & close all service tickets considered as waiters. Assist with closing other repair orders as needed. Answer incoming service phone calls. Maintain product knowledge as the Liaison between the Service Department and the customer. MARGINAL TASKS: Must be willing to do other miscellaneous tasks as required by and related to the business. SPECIAL REQUIREMENTS: • Must have good communication skills and the ability to interact well with customers, vendors and co-workers in a positive and constructive manner., • This is a safety-sensitive position for which impairment while on the job would present a substantial risk. As a condition of employment, the applicant must submit to pre-employment testing for marijuana. The position is exempt from the state law prohibiting preemployment testing for cannabis use. PHYSICAL REQUIREMENTS: Must be able to pass physical, including drug test. Must maintain a professional appearance. Involves essential ability to climb around, on and under trucks in order to properly inspect and diagnose all types of problems and repairs. Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company,Proud that our 1500+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 11 states, and we have over 1,600 team members. Bruckner’s is more than just a place selling parts and working on trucks: we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it. OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace JOB SUMMARY This position utilizes our companies Core Values to sell all Bruckner Truck Sales products using technical, organizational, and customer knowledge skills to influence customers and assist them in applying our products/services to their needs resulting in revenue generation for the company and excellent service for our customers. ESSENTIAL POSITION FUNCTIONS AND PRINCIPAL ACCOUNTABILITIES • Sell heavy-duty trucks/trailers and related components spec’s., • Call on prospective customers and assigned accounts within assigned territory, • Maintains contacts with customers in relation to their requirements; keep current on market and customer trends and document all activity in the companies CRM system., • Identifies and profiles prospective customers develop and apply strategy necessary to obtain orders, close potential orders., • Reports on competitive activity, • Keeps informed on new products and other general information of interest to customers that will assist in sales efforts, • Coordinates efforts with outside parts, service, and new and used heavy duty truck sales personnel to achieve full market penetration. Marginal Job Tasks: • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily., • The requirements listed below are representative of the knowledge, skill, and/or ability required., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Skills: Hard Skills: • Possess a valid CDL or the ability to get one in 60 days, at least 2yrs experience in truck sales or applicable experience, computer/telephone skills. Soft Skills: • Verbal communication skills, Aggressive, Self Motivated, Closing ability, Organized, Strong Time Management. Preferred Skills: • Medium & heavy truck Sales experience preferred., • Experience in the heavy-duty truck industry., • Familiar with the commercial community., • Strong customer service & sales skills., • Commercial driver’s license preferred. POSITION REQUIREMENTS Education & Experience: • A minimum high school diploma with appropriate experience is required., • Bachelors degree is preferred., • Must have a minimum 2 years retail sales experience., • Preferably some heavy duty of medium duty truck experience. Management: • The ability to organize and manage multiple priorities. Commitment to company core values. Language Skills: • Good oral and written communication skills. Mathematical Skills and Reasoning Ability: • Adequate skill to prepare sales quotes, sales assistance, and analyze truck market data., • This position requires that the employee plan and prioritize their work load. Want to know more about our family-owned company,Proud that our 1600+ employees view us as the employer of choice! YouTube - Sales Department Video YouTube - Come Join The Family -VideoYouTube - Since 1932 -Video Do not forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job DescriptionPAY $16.00 per hour WHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 11 states, and we have over 1,600 team members. Bruckner’s is more than just a place selling parts and working on trucks; we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it. OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Family and Team Oriented Environment, • Engaging and Challenging Assignments, • Drug free workplace JOB DESCRIPTION: Responsible for receiving and disbursing money for products or services rendered. Involves taking money for cash tickets and/or processing credit or debit card transactions and validating checks. Giving accurate change to customers and employees. Keeping receipts for all petty cash given out and any misc. cash taken in and reimbursing weekly. Cashier must maintain a high level of confidentially regarding employee activities. ESSENTIAL JOB TASKS: Customer Service is the most important responsibility. REQUIREMENTS: • Minimum high school diploma required., • Any additional courses in accounting favorable, but not required., • Minimum two to three years previous experience in similar position., • Previous experience with computers for automated accounting system., • Read and write the English Language., • Also is required to operate computer terminals with keyboard and mouse, 10-key calculator, fax machine and various office equipment., • Must be able to use communicative skills to interact with customers, vendors, and co-workers in a positive and constructive manner. Want to know more about our family-owned company,proud that our 1500+ employees view us as the employer of choice! YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Do not forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

At EquipmentShare, we’re not just filling a role — we’re assembling the best team on the planet to build something that’s never been built before. We’re on a mission to transform an industry that’s been stuck in the past by empowering contractors and communities through innovative technology, real-time support, and a team that truly cares. We’re hiring a Heavy Equipment Shop Technician (Mechanic) at our rental facility in Albuquerque, NM, and we’re looking for someone who’s ready to grow with us, bring energy and drive to their work, provide maintenance and repair for a variety of customer and company owned heavy equipment machinery and aerial lifts and help us build the future of construction. Mechanics will have the opportunity to work on the newest fleet in the industry. Schedule: Monday to Friday, 7:00 AM to 5:00 PM, and offers overtime pay after working 40 hours. (This role is subject to on-call scheduling with additional compensation provided) As a Shop Technician, you’ll use our tech to create, assign, and monitor work orders, track machine service intervals, order parts, and diagnose issues faster by pulling data from hundreds of makes and models. With real-time information at your fingertips, you can determine the root cause and corrective action for each issue quickly, enabling you to work smarter, not harder. Practice safe job practices for repairing equipment Use technology (laptops and tablets) comfortably Maintenance and repair of complex mechanical, electrical, hydraulic, and diesel systems on a variety of rental and customer equipment and tools while using a high degree of independent judgment Assist in the training of lower level technicians as needed Maintain paperwork/electronic documentation of work performed (work orders) in a complete and timely manner on a daily basis Assist with pick-up and delivery of equipment & parts Be knowledgeable of OSHA requirements (preferred) Year-round company provided OEM training Other duties, assigned as needed Because we do things differently — and we think you’ll feel it from day one. We’re a people-first company powered by cutting-edge technology. That means our proprietary T3 platform doesn’t just run our business — it also makes your job easier, safer, and more connected. Whether you’re behind the wheel, under the hood, leading a branch, or closing deals — tech supports you, and you drive us forward. We’re a team of problem-solvers, go-getters, and builders. And we’re looking for teammates who take pride in doing meaningful work and want to be part of building something special. Perks & Benefits • Monthly Family Dinner Night — We treat you and your family to dinner every month, because family comes first. (An employee favorite!) *restrictions apply, • Competitive compensation, • Full medical, dental, and vision coverage for full-time employees, • Generous PTO + paid holidays, • 401(k) + company match, • Tool and boot reimbursements (role dependent), • Gym membership stipend + wellness programs (earn PTO and prizes!), • Company events, food truck nights, and monthly team dinners, • 16 hours of paid volunteer time per year — give back to the community you call home, • Career advancement, leadership training, and professional development opportunities Access to industry leading diagnostic tools You want to be part of a team that’s not just changing an industry for the sake of change — we’re transforming it to make it safer, more secure, and more productive. You bring grit, heart, and humility to your work, and you’re excited about the opportunity to grow within a fast-paced, mission-driven environment. We’re looking for people who: • See challenges as opportunities, • Embrace change and continuous improvement, • Bring energy, effort, and optimism every day Must own tools applicable to position Advanced mechanical aptitude and working knowledge of tools Extensive knowledge of construction equipment with an advanced understanding of schematics and diagrams Superior customer service, teamwork and verbal/written communication skills High School diploma, Trade school certificate preferred Experience in field service, maintenance and repair preferred Must be able to move, stand, stoop and bend freely Must be able to lift up to 50 pounds at times This is a safety sensitive position and any offer of employment will be contingent on passing a 10 panel drug screen At EquipmentShare, we believe the best solutions come from a team that reflects the world around us. Our initiative — A Workplace For All — is rooted in the belief that we must work together to solve some of the toughest problems in construction. That means attracting, developing, and retaining great people from all walks of life. We value different backgrounds, talents, and perspectives. We want you to feel like you belong here — because you do. EquipmentShare is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, or status as a protected veteran. Employment is contingent on passing a background check. Additionally, some roles require passing a drug test, depending on the job responsibilities.

At EquipmentShare, we’re not just filling a role — we’re assembling the best team on the planet to build something that’s never been built before. We’re on a mission to transform an industry that’s been stuck in the past by empowering contractors and communities through innovative technology, real-time support, and a team that truly cares. We’re hiring a Heavy Equipment Field Technician (Mechanic) at our rental facility in Albuquerque, NM, and we’re looking for someone who’s ready to grow with us, bring energy and drive to their work, provide maintenance and repair for a variety of customer and company owned heavy equipment machinery and aerial lifts and help us build the future of construction. Mechanics will have the opportunity to work on the newest fleet in the industry. Schedule: Monday to Friday, 7:00 AM to 5:00 PM, and offers overtime pay after working 40 hours. (This role is subject to on-call scheduling with additional compensation provided) As a Field Technician, you’ll use our tech to create, assign, and monitor work orders, track machine service intervals, order parts, and diagnose issues faster by pulling data from hundreds of makes and models. With real-time information at your fingertips, you can determine the root cause and corrective action for each issue quickly, enabling you to work smarter, not harder. Practice safe job practices for repairing equipment Use technology (laptops and tablets) comfortably Maintenance and repair of complex mechanical, electrical, hydraulic, and diesel systems on a variety of rental and customer equipment and tools while using a high degree of independent judgment Assist in the training of lower level technicians as needed Maintain paperwork/electronic documentation of work performed (work orders) in a complete and timely manner on a daily basis Assist with pick-up and delivery of equipment & parts Be knowledgeable of OSHA requirements (preferred) • Field Mechanic: When required, travel to customer job sites for repair/maintenance of rental or customer owned equipment; must maintain service vehicle in a clean and professional manner Year-round company provided OEM training Other duties, assigned as needed Because we do things differently — and we think you’ll feel it from day one. We’re a people-first company powered by cutting-edge technology. That means our proprietary T3 platform doesn’t just run our business — it also makes your job easier, safer, and more connected. Whether you’re behind the wheel, under the hood, leading a branch, or closing deals — tech supports you, and you drive us forward. We’re a team of problem-solvers, go-getters, and builders. And we’re looking for teammates who take pride in doing meaningful work and want to be part of building something special. Perks & Benefits • Monthly Family Dinner Night — We treat you and your family to dinner every month, because family comes first. (An employee favorite!) *restrictions apply, • Competitive compensation, • Full medical, dental, and vision coverage for full-time employees, • Generous PTO + paid holidays, • 401(k) + company match, • Tool and boot reimbursements (role dependent), • Gym membership stipend + wellness programs (earn PTO and prizes!), • Company events, food truck nights, and monthly team dinners, • 16 hours of paid volunteer time per year — give back to the community you call home, • Career advancement, leadership training, and professional development opportunities Access to industry leading diagnostic tools You want to be part of a team that’s not just changing an industry for the sake of change — we’re transforming it to make it safer, more secure, and more productive. You bring grit, heart, and humility to your work, and you’re excited about the opportunity to grow within a fast-paced, mission-driven environment. We’re looking for people who: • See challenges as opportunities, • Embrace change and continuous improvement, • Bring energy, effort, and optimism every day Must own tools applicable to position Advanced mechanical aptitude and working knowledge of tools Extensive knowledge of construction equipment with an advanced understanding of schematics and diagrams Superior customer service, teamwork and verbal/written communication skills High School diploma, Trade school certificate preferred Experience in field service, maintenance and repair preferred • Valid driver's license with acceptable driving record. Must be at least 21 years old to operate company vehicle. Must be able to move, stand, stoop and bend freely Must be able to lift up to 50 pounds at times • Field Technicians may be required to be clean shaven in order to enter worksites for EquipmentShare customers who have this requirement This is a safety sensitive position and any offer of employment will be contingent on passing a 10 panel drug screen At EquipmentShare, we believe the best solutions come from a team that reflects the world around us. Our initiative — A Workplace For All — is rooted in the belief that we must work together to solve some of the toughest problems in construction. That means attracting, developing, and retaining great people from all walks of life. We value different backgrounds, talents, and perspectives. We want you to feel like you belong here — because you do. EquipmentShare is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, or status as a protected veteran. Employment is contingent on passing a background check. Additionally, some roles require passing a drug test, depending on the job responsibilities.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 12 states, and we have over 1,600 team members. • Bruckner’s is more than just a place selling parts and working on trucks, • We are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES, • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace POSITION SUMMARY: Performs preventive maintenance and minor repairs on all types of trucks and/or equipment to maximize safe and productive operations on site at customer’s locations. This position will have an impact in the following areas: customer relations, equipment diagnosis, failures of a motor vehicle and/or its related equipment and will involve professionalism, service/product training, and gathering new business relationships with prospective customers. REPRESENTIVE RESPONSIBILITIES: The following responsibilities are general duties that a particular employee in this position may or may not be required to perform. The actual duties required of this position will vary. • Inspects trucks and/or equipment, for condition, operation, parts and fluid levels., • Checks, fills and changes out appropriate fluids for all vehicle parts including engine, transmission, differentials, final drives, pump drives and hubs., • Greases, oils, and lubricates components during preventive maintenance service., • Performs adjustments to various systems during preventive maintenance service., • Maintains and/or changes air, oil, coolant and fuel filters., • Performs cooling systems maintenance., • Identifies and designates problems., • Completes necessary repair and preventive maintenance work., • Checks safety equipment on truck and/or equipment., • Drives truck in and out of repair area., • Follows all safety policies and procedures., • Completes required paperwork, documents parts and material usage and accounts for applied times (i.e. work order times versus time card times.), • Represent the Company Core Values and adheres to the guidelines of the Employee handbook on a daily basis to all internal and external customers., • Performs other job-related duties as assigned.PHYSICAL REQUIREMENTS: The following physical activities or abilities are commonly, but not always, associated with the performance of this position. The actual requirements of this position will vary. • Lift, carry and push/pull at least 50 pounds, • Climb into and out of truck., • Work in the outside environmentEXPERIENCE, EDUCATION, CERTIFICATIONS: Required: • Valid driver license, • Valid Class A CDL or the ability to obtain within 60 days of employment Preferred: • Equivalent of a high school diploma or G.E.D certification, • Prior mechanic experience., • Automotive certification., • Service Excellence classification: medium/heavy truck. Want to know more about our family-owned company, Proud that our 1500+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR #greatbendks #GBKS #greatbend #kansas

At EquipmentShare, we’re not just filling a role — we’re assembling the best team on the planet to build something that’s never been built before. We’re on a mission to transform an industry that’s been stuck in the past by empowering contractors and communities through innovative technology, real-time support, and a team that truly cares. We’re hiring a Shop Technician (Mechanic) at our Advanced Solutions rental facility in Albuquerque, NM (Advanced Solutions), and we’re looking for someone who’s ready to grow with us, bring energy and drive to their work, providing maintenance and repair for a variety of customer and company owned Pump, Power & HVAC equipment and help us build the future of construction. Technicians will have the opportunity to work on the newest equipment in the industry. Schedule: Monday to Friday, 7:00 AM to 5:00 PM, and offers overtime pay after working 40 hours. (This role is subject to on-call scheduling with additional compensation provided) As a Shop Technician, you’ll use our tech to create, assign, and monitor work orders, track machine service intervals, order parts, and diagnose issues faster by pulling data from hundreds of makes and models. With real-time information at your fingertips, you can determine the root cause and corrective action for each issue quickly, enabling you to work smarter, not harder. Practice safe job practices for repairing equipment Use technology (laptops and tablets) comfortably Perform preventive maintenance and repairs of power generators, diesel engines, electrical distribution equipment, HVAC equipment and/or oil free air compressors Troubleshoot equipment failures at the shop and on customer locations, and handle the repairs Work individually or with another technician(s) to set up and operate equipment at the shop and on customer sites Assist in the training of lower level technicians as needed Maintain paperwork/electronic documentation of work performed (work orders) in a complete and timely manner on a daily basis Assist with pick-up and delivery of equipment & parts Be knowledgeable of OSHA requirements (preferred) Year-round company provided OEM training Other duties, assigned as needed Because we do things differently — and we think you’ll feel it from day one. We’re a people-first company powered by cutting-edge technology. That means our proprietary T3 platform doesn’t just run our business — it also makes your job easier, safer, and more connected. Whether you’re behind the wheel, under the hood, leading a branch, or closing deals — tech supports you, and you drive us forward. We’re a team of problem-solvers, go-getters, and builders. And we’re looking for teammates who take pride in doing meaningful work and want to be part of building something special. Perks & Benefits • Monthly Family Dinner Night — We treat you and your family to dinner every month, because family comes first. (An employee favorite!) *restrictions apply, • Competitive compensation, • Full medical, dental, and vision coverage for full-time employees, • Generous PTO + paid holidays, • 401(k) + company match, • Tool and boot reimbursements (role dependent), • Gym membership stipend + wellness programs (earn PTO and prizes!), • Company events, food truck nights, and monthly team dinners, • 16 hours of paid volunteer time per year — give back to the community you call home, • Career advancement, leadership training, and professional development opportunities Access to industry leading diagnostic tools You want to be part of a team that’s not just changing an industry for the sake of change — we’re transforming it to make it safer, more secure, and more productive. You bring grit, heart, and humility to your work, and you’re excited about the opportunity to grow within a fast-paced, mission-driven environment. We’re looking for people who: • See challenges as opportunities, • Embrace change and continuous improvement, • Bring energy, effort, and optimism every day Must own tools applicable to position Advanced mechanical aptitude and working knowledge of tools Experience working on power generators and/or commercial HVAC equipment, performing inspections, maintenance, and repairs Experience with calculating nominal and effective tonnage and/or kW requirements, along with reading and knowing schematics Superior customer service, teamwork and verbal/written communication skills • EPA 608 certification is preferred. If you do not already have the certification, you should be able to obtain it within 6-12 months of employment. High School diploma, Trade school certificate preferred Experience in equipment service, maintenance and repair preferred Must be able to move, stand, stoop and bend freely Must be able to lift up to 50 pounds at times This is a safety sensitive position and any offer of employment will be contingent on passing a 10 panel drug screen At EquipmentShare, we believe the best solutions come from a team that reflects the world around us. Our initiative — A Workplace For All — is rooted in the belief that we must work together to solve some of the toughest problems in construction. That means attracting, developing, and retaining great people from all walks of life. We value different backgrounds, talents, and perspectives. We want you to feel like you belong here — because you do. EquipmentShare is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability, or status as a protected veteran. Employment is contingent on passing a background check. Additionally, some roles require passing a drug test, depending on the job responsibilities.

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. We currently operate in 40+ locations across 11 states, and we have over 1,600 team members.. • Bruckner’s is more than just a place selling parts and working on trucks; we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it, • We contribute to our local communities, • We care about our people OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace POSITION INFORMATION He/ she is responsible for keeping the building and grounds clean and neat, for all tools, and equipment to perform this operation. DUTIES/RESPONSIBILITIES • Must keep the building, workbenches, Company tools, and equipment clean and orderly., • Must keep the grounds cleaned from all trash and loose items., • Must help in keeping the salvage yard cleaned up and orderly., • Must help in ordering, cleaning equipment as needed., • Must have a driver’s license in order to operate the Company vehicles., • Will be required at times to pick up parts and take customers around town., • Must be able to perform all these duties in a safe manner., • Ability to follow Bruckner policy and procedures implied and expressed., • Work with a minimum of supervision. QUALIFICATIONS • High school diploma or equivalent preferred, not required: At least a minimum 9th grade education., • Must have had some experience in the trade and able to know the proper products and tools required., • Must be able to take instructions and interact cooperatively with supervisors., • Will have to maintain a professional appearance, and interact with customers, vendors, and co-workers in a positive and constructive manner., • Position requires interaction with others and the ability to move easily from one task to another. Due to the urgency of the various job tasks there will be some level of stress. PHYSCIAL DEMANDS • Involves essential ability to pass a physical and drug screen., • Must be able to lift 50 lbs from floor to waist high, and 25 lbs to shoulder high., • Must be able to work around, over, and under equipment and trucks as needed., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Want to know more about our family-owned company, Proud that our 1600+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Overhaul gas and/or diesel engines. Performs minor maintenance and repair of building and plant equipment including, air-conditioning, plumbing, cable installation and other mechanical related components.

Job DescriptionWHO WE ARE • Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States., • We currently operate in 40+ locations across 11 states, and we have over 1,600 team members., • Bruckner’s is more than just a place selling parts and working on trucks; we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it. OUR CORE VALUES, • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace Job Summary: Working with the service manger. Responsible for the safe, efficient, and profitable operation of the Service department. Oversees the work of the mechanics. Able to make proper diagnosis of all components and recommended repairs. Essential Duties and Responsibilities: Include the following and other duties may be assigned. • Diagnostic ability of all components of the truck., • Help in writing up repair orders and communicating with the drivers and owners in order to determine problems and solutions to their truck repair needs., • Schedules an assigns jobs ad work areas to employees according to their skills and knowledge. This should be accomplished in a manner to eliminate time lost between jobs., • Inspect and advise the mechanics on work as it progresses., • Keep track of each customer job and be able to advise the customer as to time of completion, cost of repairs, additional repairs, etc., • Road test and dyno test trucks in order not only to diagnose problems, but also to determine if repairs are complete., • See that the buildings, grounds, and work areas are kept clean and neatly arranged. See that all company tools and equipment are properly maintained., • Help in completing repair orders by getting the mechanics write up of the repairs, seeing that parts are billed correctly, and all needed lines are added to the ticket as it progresses. Be sure each repair is coded correctly., • Must be familiar with warranty of all parts of the truck and able to determine if a repair is warrantable., • Must help to insure safe working conditions for all employees. Educational Requirements: Minimum high school diploma required. Work Experience: Minimum four years as a mechanic and at least 2 years as a shop foreman or lead mechanic. Mathematical Skills & Reasoning Ability: Should be able to read computer generated reports, office reports, invoices, etc. Also it is required to operate computer terminals. Special Skills: Must possess and use good interpersonal skills and have the ability to interact well with customers, vendors, and co-workers in a positive and constructive manner. Must also have and maintain a Commercial Drivers License (CDL). Physical Demands: Involves essential ability to climb around, on and under trucks in order to properly inspect and diagnose all types of problems and repairs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company, Proud that our 1600+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. Bruckner’s is more than just a place selling parts and working on trucks; we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it. • We work on all makes and models!, • 40+ locations across 11 states, • 1,600 team members OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER, • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace JOB SUMMARY The technicians must be able to complete diagnosis of any mechanical, electrical, or other various failures/breakdowns of a truck or its related equipment. This position will also perform disassembly, repair, and reassembly of truck engines, transmissions, carrier assemblies, clutches, brakes, electrical systems, and any other truck or related equipment adjustment/repairs. ESSENTIAL POSITION FUNCTIONS AND PRINCIPAL ACCOUNTABILITIES • Trained to use all tools of trade, including precision instruments and technical shop machines and diagnostic tools., • Use previous and on the job training to read and understand technical publications, including on-line service software and service bulletins. He/she must be able to use information contained in them to do their own work and to assist others concerning the content., • He/She will learn to determine usability of all component parts and must be able to list and order all needed parts using the dealer management system., • Must be able to complete work accurately and timely as outlined in published time standards guidelines., • Must be able to write and/or type a good description of all work performed on each individual repair using the dealer management system., • Ability to perform all aspects of the job safely and in accordance with OSHA and Bruckner’s rules and regulations expressed and implied., • Understands the importance of attendance and punctuality and how it directly impacts customer service., • Is a good steward of company tools and resources., • Achieves and maintains certifications as required by the company, the OEM’s or by Federal Law. EXAMPLES OF SKILLS NEEDED TO MASTER THIS LEVEL • P.M. Services, • Steam Clean, • P.D.I. Inspections, • Used Truck Inspections, • Wheel Seals, • Brake Adjustments, • Clutch Adjustments, • Pinion Seals, • Foundation brake replacement (shoes, drums, & hardware), • Battery diagnoses & replacement, • U-joints, • Shocks, • Small make ready items (mudflaps,1/4 fenders, bug screens, bug shields, & bumpers)POSITION REQUIREMENTS Education & Experience:, • High School Diploma desired., • Must possess and use good interpersonal skills to interact well with customers, vendors, and co-workers in a positive and constructive manner., • Must be able to operate various computer diagnostic devices, laptops, and tablets. Physical Demands: • Involves essential ability to maneuver around, in, on and under trucks in order to properly inspect and diagnose all types of problems and repairs., • Must be able to pass a physical and drug and alcohol screens during pre-employment screening, randomly and/or as requested throughout employment., • Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company, Proud that our 1500+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Job DescriptionWHO WE ARE Bruckner Truck & Equipment is one of the largest family-owned semi truck dealerships in the United States. Bruckner’s is more than just a place selling parts and working on trucks; we are an essential business delivering solutions to transportation providers – the backbone of everyday life as we know it. • We work on all makes and models!, • 40+ locations across 11 states, • 1,600 team members OUR CORE VALUES • We act with Honesty and Integrity., • We value our people and communities., • We are customer focused., • We do what it takes. WHAT WE OFFER • Competitive Compensation Plans, • Paid Time Off and Holidays, • Excellent health, dental and vision plans, • Investments in Training & Development, • Generous 401(k) and Profit-Sharing Plan, • Tuition Assistance Program, • Employee Stock Ownership (every employee earns shares and has ownership interest in the Bruckner’s organization), • Technician Student Loan Reimbursement Program, • Disability and Life Insurance, • Internal Promotion Opportunities, • Flexible Spending Account, • Health Club Reimbursement, • Family and Team Oriented Environment, • Employee Referral Bonus, • Engaging and Challenging Assignments, • Drug free workplace JOB SUMMARY The technicians in Tier 2 will have mastered the skills trained in the Tier 3 job specifications. In addition, a Tier 2 technician will have achieved various levels of on-line training and approved off site training and specified below. A technician will not be considered for Tier 2 advancement until they have a minimal of two years on the job training. ESSENTIAL POSITION FUNCTIONS AND PRINCIPAL ACCOUNTABILITIES REQUIRED IN ADDITION TO THOSE STATED IN THE TIER 3 DESCRIPTION • Completed online portion training in Mack & Volvo in our Dual branded locations and single brand in those single branded locations. This requirement may also be met using Cummins Training, Medium Duty Training, & or Allison training., • Actively working on approved off-site training prerequisites and or attending off-site training towards a certification in the agreed upon training path., • Working knowledge and can demonstrate systems knowledge of: (Air System, Fuel Systems, After treatment systems etc.) EXAMPLES OF SKILLS NEEDED TO MASTER THIS LEVEL • Performs timely repairs, minimum 85% efficiency and 80% Proficiency., • Performs quality repairs should have minimal rework based on value, frequency, and managerial discretion., • Able to perform moderately difficult diagnostics but may struggle with more difficult situations., • Can diagnose and repair basic electronic, lighting, and electrical systems., • Requires minimal supervision., • A forward-thinking and creative individual with high ethical standards and an appropriate professional image., • Has a can-do attitude and is considered a "Go to" in at least two areas of repair?, • Displays a firm understanding of the big picture and the mission at hand. PROGRESSION REQUIREMENT • Complete all Tier 3 Job Role Requirements., • Must complete a Minimum of 2 items listed below., • Complete in 3 areas of the ASE “Medium/Heavy Duty Truck Certifications”, • Master Certified in at least 1 Mack or Volvo Pro-Path Segments., • D.O.T. Inspection Certified., • Certified in at Least one Cummins engine platforms., • Certified in a Medium Duty (Hino, Mitsubishi, or Isuzu), • Allison Transmission Certified (one), • Have valid Commercial Driver’s License. Physical Demands: • Involves essential ability to maneuver around, in, on and under trucks in order to properly inspect and diagnose all types of problems and repairs., • Must be able to pass a physical and drug and alcohol screens during pre-employment screening, randomly and/or as requested throughout employment., • Must be able to lift 50 pounds to the waist and 25 pounds to the shoulder. Want to know more about our family-owned company, Proud that our 1600+ employees view us as the employer of choice! YouTube- Service Department Video YouTube - Come Join The Family -Video YouTube - Since 1932 -Video Don't forget to Like and Subscribe! Keywords: Diesel OR Trucking OR Dealership OR ADP OR Mack OR Volvo OR Caterpillar OR Allison OR Cummins OR Dealer OR Heavy Equipment OR Trailer OR Truck Sales OR Deal Sheet OR Class A OR CDK OR Frame Shop OR Foreman OR Leasing OR Service OR Warranty OR Parts OR Office OR Semi Truck OR Mechanic OR Google Jobs OR Career OR B2B Outside Sales OR Sales Representative OR Commercial Sales, OR Fabrication #ZR

Troubleshooting electrical, mechanical, and access control systems. Strong mechanical aptitude and problem-solving skills. If you’re dependable, mechanically skilled, and ready to work with a company that values craftsmanship, professionalism, and growth — apply today and build your career with

Timberlyn Lighting has been in business for 30 years, and we have worked hard to earn a reputation as one of the top lighting contractors in the industry.We are looking for a traveling licensed electrician to join our growing team and take advantage of the many benefits of working at Timberlyn Light

Troubleshooting electrical, mechanical, and access control systems. Strong mechanical aptitude and problem-solving skills. If you’re dependable, mechanically skilled, and ready to work with a company that values craftsmanship, professionalism, and growth — apply today and build your career with

Do you desire to be part of an exciting, emerging industry with an opportunity for great personal experience and growth? Cypress Creek is seeking an enthusiastic individual to play an important role in this fast-moving, nimble solar IPP.Currently, we have one opening in Baltimore, MD area for a full

This role involves diagnosing mechanical, electrical, and control system issues, training users on machine operations, and tuning equipment for optimal performance. Proficient in troubleshooting and repair of mechanical, electrical, and control systems on precision equipment. Technical diploma or de

Perform advanced troubleshooting across mechanical, electrical, pneumatic, and software systems. Bachelor's degree in Electrical Engineering, Mechanical Engineering, Electronic Engineering, Network Engineering, Computer Technology, or equivalent military technical experience/certified trade training

SERVICE DESK TECHNICIAN (Boise, ID).CANDIDATES MUST BE LOCAL TO THE SERVICE AREA AND BE LEGALLY AUTHORIZED TO WORK IN THE UNITED STATES ON A FULL-TIME BASIS – INTERNATIONAL CANDIDATES NEED NOT APPLY.Since 1993, Right! Systems, Inc.RSI) has been providing exceptional solutions and uncommon expertis

This role requires strong mechanical, electrical, and hydraulic troubleshooting skills, along with the ability to deliver exceptional customer service in the field. Diagnose mechanical, electrical, hydraulic, and operational issues and complete repairs efficiently. Strong mechanical, electrical, and

Troubleshoot mechanical and electrical issues using diagnostic tools. Strong mechanical aptitude and a passion for hands-on work. Experience using hand tools, test equipment, or troubleshooting mechanical/electrical systems.

Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals.

This role places a strong emphasis on electrical troubleshooting, CNC controls, and machine diagnostics, while also requiring proficiency with mechanical, hydraulic, and pneumatic systems. Diagnose and repair mechanical, hydraulic, and pneumatic systems. Read and interpret electrical, hydraulic, and

Performs hands-on electrical and mechanical troubleshooting and repairs on machines to ensure machine is functioning correctly according to specifications. Strong mechanical and/or electrical skills.

Three or more years of mechanical maintenance experience in a production or manufacturing environment. Strong electromechanical background with hands-on electrical troubleshooting experience. This onsite position is ideal for a hands-on electromechanical professional who enjoys troubleshooting autom

Accountable for proper start up, operation of all electrical, electronic/control systems, and mechanical components, proper sequencing/Interlocking, and proper calibration, and applications of each of these systems. Conducts operator skills training for selected customer employees including but not

Droisys is an innovation technology company focused on helping companies accelerate their digital initiatives from strategy and planning through execution.We leverage deep technical expertise, Agile methodologies, and data-driven intelligence to modernize systems of engagement and simplify human/tec

Extensive knowledge of mechanical and hydraulic systems. Employee may be occasionally exposed to moving equipment, mechanical parts in motion, risk of shock and other hazards associated with a manufacturing environment such as overhead cranes, welding, machining, painting etc.

Norbryhn NSW is a growing HVAC Manufacturer’s Representative firm providing a full range of building mechanical equipment systems and accessories. Working knowledge of HVAC mechanical systems and airflow principles.

Take ownership regarding the correct implementation of the pre-commissioning activities in the mechanical, electrical, instrumentation, and automation disciplines, ensuring the quality of the work and of the quality of the reports. Support the project team in ensuring all the mechanical, electrical,

Mechanical aptitude and understanding of vehicle systems.

Strong mechanical aptitude with demonstrated experience repairing industrial machinery. Ability to read and interpret electrical schematics, mechanical drawings, and equipment manuals. Takes pride in solving difficult mechanical and electrical problems.

We have openings for Field service Technicians with experience in:.Industrial ammonia refrigeration, lead technicians must live West of the Mississippi to Arizona and North.Form and fill packaging in food processing Must live in the Great Lakes area.Heat exchangers and pasteurization in beverage pro

Assist with customers for assistance with technical troubleshooting involving electrical and mechanical systems. Technical training in electro-mechanical technology or relevant experience. Proficiency in electrical and mechanical equipment, Microsoft Office, and effective communication.

Troubleshooting mechanical, electrical, and control system issues. Experience installing, maintaining, and troubleshooting HVAC or electromechanical equipment.

We are seeking a skilled and experienced Journeyperson Electrician to join our team.The ideal candidate will have a strong background in electrical systems, with the ability to work independently and as part of a team.This role involves installing, maintaining, and repairing electrical systems in va

GreyStar - - Responsibilities: Complete assigned work orders and preventative maintenance on the property; Complete make-ready process for vacant units and prepare for leasing; Track inventory and manage material usage for maintenance; Document service requests for tracking and reporting; Assist in

Cutter Aviation is currently searching for an energetic and knowledgeable member of our Line Service team.The Line Service Technician (LST) must be an exceptional relationship builder with the drive to provide world-class customer service with respect to activities on the ramp and interfaces with cu

GreyStar - - Responsibilities: Process work orders and preventative maintenance; Complete make-ready for vacant units; Track inventory and restock supplies; Document service requests accurately; Assist in grounds, cleaning, painting and general upkeep.

Snelling - - Responsibilities: Assist mechanics with vehicle maintenance and repairs; Perform routine inspections and preventative maintenance tasks; Help with lifting, moving, and handling vehicle parts and equipment; Maintain a clean and safe work area; Follow all company safety procedures and gui

GreyStar - AYA ABQ [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make repairs in acc

Culligan - - Responsibilities: Diagnose and repair water-treatment equipment; Install and upgrade equipment at client sites; Perform maintenance and servicing of Culligan systems; Complete service paperwork accurately; Maintain company vehicles and tools.

GreyStar - - Responsibilities: Complete work orders from resident requests and PM tasks; Perform make-ready and pre-move-in inspections; Manage materials/inventory and re-ordering; Document service requests accurately; Maintain grounds, common areas, and painting/cleaning as needed.