Electrical design engineer jobs in Santa Clara, California - Page 10Create job alerts

Job DescriptionABM, a leading provider of integrated facility solutions, is looking for a Journeyman Building Engineer. The Journeyman Building Engineer supports the designated leadership with the daily operations of all building systems. This includes hard surface maintenance and repair, basic carpentry and metal work, operating, maintaining and repairing all facility system equipment associated with HVAC operations and mechanical and electrical systems. The Building Engineer will also respond to customer requests and submit and close work orders as necessary and perform other duties as assigned. Pay Range is: $72.93/HR The pay listed is the salary range for this position. An offer will vary based on the applicant's education, experience, skills, abilities, geographic location, and alignment with market data. Schedule: Mon-Fri 10am-6:30pm Benefit Information: This is a Local 39 union position and as such will include union benefits.Essential Functions • Follows safe practices and complies with company and regulatory standards., • Qualified to operate or assist in operating all heating and ventilating equipment, engines, turbines, motors, combustion engines, pumps, air compressors, ice and refrigerating machines, air conditioning units, fans and siphons on the site assigned., • Must be flexible and willing to complete all tasks as assigned., • You will be responsible for working with both internal and external customers on technical issues, work scope recommendations and failure investigations., • You could work in a variety of engineering departments based on current needs.Responsibilities, • Provides engineering support for a wide range of systems, maintenance programs, engines as well as operational engineering functions., • Must be able to understand, analyze and seek solutions to the design, operation, maintenance, performance or repair of vehicles/equipment and their components., • Should be able to logically approach problem solving, define a maintenance program or configuration and ensure a safe and legal operation., • Reviews Service Bulletins (SBs) from manufacture or component manufacture., • Develops solutions and implementation plans, project justification, cost/benefit analysis, and overall management of project implementation and coordinate warranty recovery on SBs that are applicable., • Organizes and manages the priorities for assigned responsibilities and accomplishes the work process to meet all deliverable for projects as well as maintenance program changes and technical specification revisions., • Coordinates work with other operational groups to ensure safety, regulatory compliance, operational reliability and operational efficiency.Qualifications, • 5 plus years of engineering experience., • Engineering skill sets which can be applied to a range of systems, maintenance programs and engines., • Must meet ll requirements to receive approval for working in specific ATS environments (if applicable), including ten-year work history if available.

Job Description Please Note: To provide the best candidate experience amidst our high application volumes, each candidate is limited to 10 applications across all open jobs within a 6-month period. Advancing the World's Technology Together Our technology solutions power the tools you use every day--including smartphones, electric vehicles, hyperscale data centers, IoT devices, and so much more. Here, you'll have an opportunity to be part of a global leader whose innovative designs are pushing the boundaries of what's possible and powering the future. We believe innovation and growth are driven by an inclusive culture and a diverse workforce. We're dedicated to empowering people to be their true selves. Together, we're building a better tomorrow for our employees, customers, partners, and communities. What You'll Do Samsung Semiconductor is seeking a Senior Systems Engineer to lead the design, modeling, simulation, and experimental validation of high-performance optical products and precision lenses. You will apply strong fundamentals in physics, optics, and mathematics, alongside hands-on experience in electro-optical prototyping and hardware integration. Your role involves advanced ray-tracing simulations for complex LiDAR systems to generate 3D point cloud data and ensure system-level performance. Location: Daily onsite presence at our San Jose headquarters in alignment with our Flexible Work policy with an average of 15% travel per month Reports to: Director • Lead the design, modeling, and experimental validation of LiDAR sensors and precision optics., • Optimize optical architectures using sequential and non-sequential ray-tracing tools (e.g., Zemax, LightTools, or Speos)., • Design high-precision lenses and validate the seamless integration of optical components., • Develop detailed ray-tracing models for sophisticated LiDAR scanners (multi-beam, scanning mechanisms, and detectors) while assembling and aligning electro-optical setups., • Simulate environmental interactions to produce accurate 3D point cloud data for algorithm verification and system validation., • Script custom simulation tools in Python or other languages for error budgeting and performance analysis., • Execute experimental measurements and data acquisition to drive iterative design improvements and technical reporting., • Master's degree with 3+ years experience or PhD in Physics, Optical Engineering, Electrical Engineering, or a related field., • 3 + years in automotive semiconductor or sensor industries, focused on optical system design and manufacturing., • Solid background in physics, optics, and applied mathematics., • Proven expertise in optical design, modeling, and experimental validation., • You're inclusive, adapting your style to the situation and diverse global norms of our people., • An avid learner, you approach challenges with curiosity and resilience, seeking data to help build understanding., • You're collaborative, building relationships, humbly offering support and openly welcoming approaches., • Innovative and creative, you proactively explore new ideas and adapt quickly to change. #LI-MD1 What We Offer The pay range below is for all roles at this level across all US locations and functions. Pay within this range varies by work location and may also depend on job-related knowledge, skills, and experience. We also offer incentive opportunities that reward employees based on individual and company performance. This is in addition to our diverse package of benefits centered around the wellbeing of our employees and their loved ones. In addition to the usual Medical/Dental/Vision/401k, our inclusive rewards plan empowers our people to care for their whole selves. An investment in your future is an investment in ours. Give Back With a charitable giving match and frequent opportunities to get involved, we take an active role in supporting the community. Enjoy Time Away You'll start with 4+ weeks of paid time off a year, plus holidays and sick leave, to rest and recharge. Care for Family Whatever family means to you, we want to support you along the way—including a stipend for fertility care or adoption, medical travel support, and virtual vet care for your fur babies. Prioritize Emotional Wellness With on-demand apps and free confidential therapy sessions, you'll have support no matter where you are. Stay Fit Eating well and being active are important parts of a healthy life. Our onsite Café and gym, plus virtual classes, make it easier. Embrace Flexibility Benefits are best when you have the space to use them. That's why we facilitate a flexible environment so you can find the right balance for you. Base Pay Range$138,000—$206,000 USD Equal Opportunity Employment Policy Samsung Semiconductor takes pride in being an equal opportunity workplace dedicated to fostering an environment where all individuals feel valued and empowered to excel, regardless of race, religion, color, age, disability, sex, gender identity, sexual orientation, ancestry, genetic information, marital status, national origin, political affiliation, or veteran status. When selecting team members, we prioritize talent and qualities such as humility, kindness, and dedication. We extend comprehensive accommodations throughout our recruiting processes for candidates with disabilities, long-term conditions, neurodivergent individuals, or those requiring pregnancy-related support. All candidates scheduled for an interview will receive guidance on requesting accommodations. Recruiting Agency Policy We do not accept unsolicited resumes. Only authorized recruitment agencies that have a current and valid agreement with Samsung Semiconductor, Inc. are permitted to submit resumes for any job openings. Applicant AI Use Policy At Samsung Semiconductor, we support innovation and technology. However, to ensure a fair and authentic assessment, we prohibit the use of generative AI tools to misrepresent a candidate's true skills and qualifications. Permitted uses are limited to basic preparation, grammar, and research, but all submitted content and interview responses must reflect the candidate's genuine abilities and experience. Violation of this policy may result in immediate disqualification from the hiring process. Applicant Privacy Policy

Job Description About Etched Etched is building the world’s first AI inference system purpose-built for transformers - delivering over 10x higher performance and dramatically lower cost and latency than a B200. With Etched ASICs, you can build products that would be impossible with GPUs, like real-time video generation models and extremely deep & parallel chain-of-thought reasoning agents. Backed by hundreds of millions from top-tier investors and staffed by leading engineers, Etched is redefining the infrastructure layer for the fastest growing industry in history. Job Summary As a NPI Production Engineer at Etched, you will own the electrical manufacturing side of our AI systems, ensuring seamless product introduction from NPI through high-volume ramp. You will collaborate with hardware, ASIC, mechanical, and reliability engineering to drive manufacturability, yield, and cost efficiency at scale. This role focuses on board-level bring-up, design-for-manufacturing (DFM), BOM risk management, and sustaining improvements to ensure our AI hardware meets the highest standards of quality and reliability. Representative projects * Lead electrical manufacturing readiness for new product introductions (NPI) and sustaining engineering activities at board and system level. * Drive DFM (Design for Manufacturability) and DFT (Design for Test) for PCBAs and electrical subsystems to ensure robust, scalable, and cost-effective production. * Develop and validate manufacturing structural inspection strategies (AOI, 5DX/3D, boundary scale). * Work with EMS partners to define and refine PCBA SMT processes to be high yielding and reliable. * Collaborate with suppliers to ensure process capability and yield targets are met. * Identify and resolve yield issues during ramp and mass production. * Perform failure analysis and root cause investigations for electrical issues. * Analyze production data to improve quality, cost, and cycle time. * Travel domestically and internationally to support manufacturing builds. * Partner with Supply Chain and Hardware teams to influence component selection and mitigate manufacturing risk early in the design cycle. * Own BOM structuring and risk management, ensuring supply resilience and cost control. * Perform board bring-up and debug, applying DOE/EFA and hands-on lab work. * Review and influence Process FMEA and Design FMEA, providing diagnostics input. * Develop, release, and maintain product documentation across the lifecycle. * Provide leadership in complex issue resolution and drive defect/yield improvement initiatives. You may be a good fit if you have * Bachelor’s or Master’s degree in Electrical Engineering or a related field. * 5+ years of experience in manufacturing, product, or electrical engineering * Strong knowledge of system hardware architectures and PCB fabrication/assembly processes. * Experience with DFX/DFM, yield assessment, and board-level debug. * Hands-on experience with PCB CAD/CAE tools (e.g., Allegro, Valor) and understanding of design-to-build flows. * Proven ability to work across NPI and sustaining environments, from proto bring-up to ramp. * Strong problem-solving skills with focus on yield, manufacturability, and cost optimization. * Collaborative mindset to work effectively with cross-functional teams and suppliers. Benefits * Medical, dental, and vision packages with generous premium coverage * $500 per month credit for waiving medical benefits * Housing subsidy of $2k per month for those living within walking distance of the office * Relocation support for those moving to San Jose (Santana Row) * Various wellness benefits covering fitness, mental health, and more * Daily lunch + dinner in our office How we’re different Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. We are a fully in-person team in San Jose (Santana Row), and greatly value engineering skills. We do not have boundaries between engineering and research, and we expect all of our technical staff to contribute to both as needed. Compensation Range: $150K - $210K

Job Description At Alpha and Omega Semiconductor (AOS), we design, develop and globally supply a broad range of power semiconductors, including a wide portfolio of Power MOSFET, IGBT, IPM, TVS, GaN/SiC, Power IC and Digital Power products. You will find our products in everyday applications including personal computers, graphic cards, gaming consoles, TVs, home appliances, smart phones, power tools, and more! At the center of our innovation is our people who bring passion, talent, and a collaborative atmosphere to our growing company. We offer an impressive benefit package and career development opportunities. If you are ready to take the next step in your career working with a team of passionate and talented people, then take a look at the job opportunity below to POWER your career! Overall Purpose of Position: • This position is to support the product definition and system/applications engineering works., • Responsible for defining power management products, • Perform bench validations/characterizations, • Build simulation model or hardware for proof of concepts, • Strong background in power electronics, • Experience with power electronics topologies, • Experience in designing isolated dc-dc converters and gate driver circuits, • Experience with analysis and simulation tool, • Good verbal and written communication skills Job Posted by ApplicantPro

Job Description About Etched Etched is building the world’s first AI inference system purpose-built for transformers - delivering over 10x higher performance and dramatically lower cost and latency than a B200. With Etched ASICs, you can build products that would be impossible with GPUs, like real-time video generation models and extremely deep & parallel chain-of-thought reasoning agents. Backed by hundreds of millions from top-tier investors and staffed by leading engineers, Etched is redefining the infrastructure layer for the fastest growing industry in history. Job Summary We are seeking an experienced and motivated Platform Validation Engineer to validate system hardware and printed circuit board (PCB) functionality and ensure robust power and signal margins across all interfaces. In this role, you will collect and analyze lab data to validate hardware performance, support post-silicon characterization, and ensure reliable operation across multiple subsystems, including PCIe and I2C. Key Responsibilities * Perform system hardware and PCB functional verification to ensure all features meet design specifications, including validation of power and signal integrity margins * Collect and analyze lab data to verify power delivery, signal integrity, and overall system robustness * Support post-silicon validation by identifying key performance metrics and conducting PVT, power, and thermal characterization * Evaluate PCIe performance, including signal integrity, eye opening measurements (EOM), and bit error rate (BER), to ensure adequate operating margins * Identify hardware issues, perform root cause analysis, and drive issues to resolution in collaboration with cross-functional teams * Design and execute DOE experiments to debug hardware issues and optimize system performance * Validate power sequencing, microcontroller functionality, and conduct power efficiency, noise, and transient analysis * Perform detailed characterization of I2C bus systems to ensure compliance with design requirements * Track and document PCB issues and validation results, ensuring clear communication with relevant stakeholders * Collaborate closely with design, firmware, and system engineering teams to ensure end-to-end hardware quality You may be a good fit if you have * A Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or a related field * Proven experience with hardware validation, lab testing, and PCB-level debugging * Strong understanding of power integrity and signal integrity principles and measurement techniques * Familiarity with PCIe, I2C, and other common hardware interfaces and protocols * Experience using lab equipment such as oscilloscopes, logic analyzers, spectrum analyzers, and power supplies * Hands-on experience debugging hardware issues and performing root cause analysis * Knowledge of power sequencing and microcontroller-based systems * Strong analytical and problem-solving skills, including experience with scripting languages such as Python or Matlab * Excellent communication skills and the ability to work effectively in cross-functional teams Benefits * Medical, dental, and vision packages with generous premium coverage * $500 per month credit for waiving medical benefits * Housing subsidy of $2k per month for those living within walking distance of the office * Relocation support for those moving to San Jose (Santana Row) * Various wellness benefits covering fitness, mental health, and more * Daily lunch and dinner in our office Compensation Range * $150,000 - $275,000 How we’re different Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. We are a fully in-person team in San Jose and Taipei, and greatly value engineering skills. We do not have boundaries between engineering and research, and we expect all of our technical staff to contribute to both as needed.

Job Description At SK Hynix Memory Solution, we're at the forefront of semiconductor innovation, developing advanced memory solutions that power everything from smartphones to data centers. As a global leader in DRAM and NAND flash technologies, we drive the evolution of advancing mobile technology, empowering cloud computing, and pioneering future technologies. Our cutting-edge memory technologies are essential in today's most advanced electronic devices and IT infrastructure, enabling enhanced performance and user experiences across the digital landscape. We're looking for innovative minds to join our mission of shaping the future of technology. At SK Hynix Memory, you'll be part of a team that's pioneering breakthrough memory solutions while maintaining a strong commitment to sustainability. We're not just adapting to technological change – we're driving it, with significant investments in artificial intelligence, machine learning, and eco-friendly solutions and operational practices. As we continue to expand our market presence and push the boundaries of what's possible in semiconductor technology, we invite you to be part of our journey to creating the next generation of memory solutions that will define the future of computing. About the Role: SK Hynix Memory Solutions has a key design center in San Jose with focus on enterprise datacenter SSD development. The Reliability System Engineering team is seeking a talented and detail-oriented engineer to join us and help ensure our products meet the highest standards of quality, performance, and reliability. As a test development engineer, you will help design, develop, automate, and execute test plans to validate the reliability of our enterprise data center SSD products. You will work closely with other functional development teams to identify, reproduce, and resolve defects during the development lifecycle. In addition, we are always looking to innovate and enhance our test coverage and automation capabilities. You will have the opportunity to demonstrate your capabilities and lead the development of our internal test orchestration and automation platforms to adapt to this rapidly evolving storage and AI landscape. A successful candidate should be self-driven, innovative, able to communicate clearly, and must work well in a collaborative team environment. Responsibilities and Tasks • Develop and maintain test plans, test cases, and test reports based on product requirements and industry standards (e.g., JEDEC, OCP, NVMe, PCIe)., • Design and develop in house test platforms for SSD validation (using Python, Java, and C/C++)., • Work with other team members to automate and execute tests on SSDs for validating product features, stability, and reliability, • Analyze test results, log defects, and track issues through resolution using JIRA., • Stay up to date with emerging SSD technologies, protocols, and industry test methodologies, including AI related workloads and use cases Minimum Qualifications • Bachelor's degree in Computer Science, Electrical Engineering, Computer Engineering, or related field., • 6+ years data storage industry experience, working in SSD/HDD design, development, or validation, • Proficiency in Python and C/C++, Java experience is a plus., • Familiarity with Linux/Windows OS, command-line tools, and storage utilities (e.g., fio, smartctl, iostat)., • Strong analytical, debugging, and problem-solving skills., • Excellent communication and collaboration skills. Preferred Qualifications • Experience developing and working with scalable SSD/HDD testing platforms, • Strong understanding of SSD architecture, NVMe/SATA protocols, and storage interfaces., • Experience developing and modifying the linux kernel, PCIe, NVMe utilities, • Experience working with volume SSD test system such as Flexstar, Neosem, Advantest, or UniTest equipment, • Experience with container and orchestration systems like Docker and Kubernetes REGARDING COMPENSATION: SK hynix memory solutions America Inc. offers you the opportunity to apply your skills to exciting projects while working with innovative teams. Our compensation package is complimented by a generous benefits package including medical, dental, vision, life insurance and a company 401(k) match, as well as cafeteria, onsite gym and much more. If you are motivated by technical challenges, we offer a collaborative work environment that encourages career growth. The salary offered to a selected candidate will be tailored based on several factors, including the location, job grade, relevant knowledge, skills, and experience. We also take into account the internal equity among our current team members to ensure fairness and competitiveness

Job DescriptionSalary: Senior Software Engineer Back End, Infrastructure Management Location: Milpitas, CA The Role: MemVerge is searching for expert software developers who are specialized in system management to join our award-winning engineering team building a disruptive data infrastructure based on persistent memory technology. This role focuses on architecting and developing the core system management layer of our Big Memory platform, which provides both persistence and memory-speed access to the in-memory data. We welcome self-driven individuals, who excel under limited direction, to join our award-winning team and company. A Few of Your Key Responsibilities: • Design and develop the core components of our system management layer for our enterprise-class, memory-centric platform, • Develop core components for Configuration, Monitoring, and Analytics, • Develop and perform related unit, functional, and integration tests, • Debug and resolve performance and reliability issues, • Effectively communicate with development teams (UI, UX, and Controller Plane), • Collaborate with the customer-facing team to support customer requirements, • Collaborate with the solution engineering team to create novel solutions and architectures The Top Skills You Will Need to Succeed: • 5+ years of software development experience in system management, preferably for enterprise grade software, • Proficient understanding of HTTP, HTTPS, RESTful API and gRPC, • Advanced expertise with one or more of these programming languages - Go, Python, or Java, • Proficient understanding of web development frameworks and utilities, • Experience building cloud-based systems The Top Desired Skills That Will be Most Helpful: • Experience with container orchestration framework (such as Kubernetes, Docker), • Familiarity with databases and Key value stores, micro-services architecture, • Experience with using Cloud Infrastructure Providers such as AWS, Azure, and GCP, • Ability to design and implement novel and high-quality solutions, • Thrive in a fast-paced development environment and previous start-up experience, • Strong analytical abilities, a willingness to learn, a commitment to quality and integrity Preferred Education: • BS/MS degrees in computer science, computer engineering, electrical engineering, or other related areas Cutting Edge Technology Changing the State of Computing: Founded by the creators of VMWare VSAN and Extreme I/O, and strategically backed by Intel, Cisco, NetApps, and SK Hynix, MemVerge, the inventor of Memory Machine Software is delivering Big Memory and the Memory-Centric Infrastructure (MCI) of the future, today. MemVerge Memory Machine Software is delivering real solutions for Big Memory Data Services such as instant checkpointing, snapshot, memory replication, and tiering that for the first time enables lightning-fast recovery from in-memory application crashes. Pioneering the Big Memory revolution, MemVerge is a small startup with a big vision of petabyte-pools of disaggregated memory available to every application across the multi-cloud and is shaping the future of computing where everything runs at speed of memory. Headquartered in Silicon Valley California, MemVerge also has R&D Centers in both Shanghai and Beijing. Learn more at: JoinMemVerge today and help us shape the future of Big Memory computing. Apply now! MemVerge is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, gender, religion, sex, sexual orientation, age, disability, military status, or national origin or any other characteristic protected under federal, state, or applicable local law. Please note that employment at MemVerge is contingent upon completion of a satisfactory background check.

Job DescriptionECAD SW Development Engineer (Contract Position) Job TitleECAD SW Development Engineer Job DescriptionThe Apple Hardware Engineering organization is looking for an ECAD development engineer, to develop solutions to improve the efficiency and productivity of the best hardware engineering team on the planet, helping to better realize and deliver Apple’s leading hardware products. With a background in electrical engineering,  PCB design and software development, the ideal candidate will contribute to a large range of projects, focused on PCB design.Responsibility includes but is not limited to enhancing design checking, custom tool application workflows, and the design release process to PLM. The candidate will draw upon strong analysis, communication and problem-solving skills to drive creative, impactful and efficient solutions, helping our hardware design teams deliver their best work. Job ResponsibilitiesDeveloping and testing design tools, workflows, customizations and automationCollaborating with engineering and customer success teamsWorking independently as well as with a larger team EducationBS, MS or equivalent experience preferred Key QualificationsExperience with EDA vendor software - Cadence, Zuken, MentorExpertise in scripting languages - Cadence Skill, Perl, Python, TclComfortable in web development, HTML, CSS and modern Javascript frameworksProficient in SQLExpertise in object-oriented programming and complex data structuresExcellent debugging and critical thinking skills.Excellent analytical and problem-solving skills.Experience delivering customer support and consultationStrong verbal and written communication skills. Preferred Qualifications Proficiency with languages like: Cadence Skill, Perl, Python, JavaScript, Tcl,Proficiency with Linux RHEL3+ years’ experience with configuration management and version control systems, such as Perforce and Git

Job DescriptionSenior Software & Systems Engineer – Semiconductor Failure Analysis Tools Location: San Jose, CA Salary: $130,000 – $175,000 per year + bonus Employment Type: Full‑time Overview Step into a rare engineering role where advanced software development meets cutting‑edge semiconductor diagnostics. Youll join a highly specialized team building multi‑million‑dollar instrumentation used by the worlds leading semiconductor manufacturers. These systems integrate laser scanning microscopy, photon emission analysis, precision motion control, and CAD-based device navigation to pinpoint defects at the transistor level—dramatically accelerating silicon debug and improving yield. If youre excited by complex instrumentation, real-time system design, and deep semiconductor physics, this is a career-defining opportunity. What Youll Do As a Senior Software & Systems Engineer, you will architect and build sophisticated control software that powers high‑precision diagnostic tools. Your work spans optics, electronics, device physics, data visualization, and system-level integration. Key Responsibilities • Develop and maintain software for controlling precision optical, mechanical, and electronic subsystems used in semiconductor failure analysis., • Transform complex physical diagnostics into intuitive, highly usable software tools in close collaboration with hardware engineers and FA specialists., • Design fast, responsive control systems that interface with CAD navigation environments for real-time device mapping and transistor-level targeting., • Build high-performance user interfaces (C#/WPF) to visualize waveforms, emission signatures, images, and device layouts., • Lead integration across lasers, motion-control stages, optical assemblies, timing electronics, and measurement tools including oscilloscopes and source meters., • Troubleshoot complex interactions between hardware and software, optimizing performance across the full system., • Document architectures, workflows, and test plans to ensure long-term reliability and maintainability.Required Qualifications, • Bachelors or Masters degree in Electrical Engineering, Physics, Semiconductor Device Engineering, or a related discipline., • 5+ years developing control software for scientific, diagnostic, or semiconductor instrumentation., • Strong programming skills in C++, C#, and WPF on Windows environments., • Solid understanding of semiconductor device physics and failure mechanisms., • Experience with CAD navigation tools (e.g., Synopsys Avalon or similar).Preferred Experience, • Hands-on exposure to failure analysis techniques such as TIVA, LIVA, LADA, OBIRCH, or photon emission., • Experience with laser microscopy or optics-driven instrumentation., • Familiarity with hardware interfaces such as USB, PCIe, FPGA, RS‑232/485., • Background with semiconductor equipment companies and complex multi-domain systems., • Experience in real‑time data processing and visualization of large scientific datasets.Why This Role Stands Out, • Quarterly Discretionary Bonus Program, • Paid Time Off: 16 days per year, • Supportive, collaborative team environment

Job Description We are CARIAD, an automotive software development team with the Volkswagen Group. Our mission is to make the automotive experience safer, more sustainable, more comfortable, more digital, and more fun. To achieve that we are building the leading tech stack for the automotive industry and creating a unified software platform for over 10 million new vehicles per year. We're looking for talented, digital minds like you to help us create code that moves the world. Together with you, we'll build outstanding digital experiences and products for all Volkswagen Group brands that will transform mobility. Join us as we shape the future of the car and everyone around it. Role Summary: The Sr. Staff Embedded Software Engineer, designs and delivers embedded base software for high-performance computing platforms at CARIAD and the Volkswagen Group, focusing on QNX and/or Android-based Automotive IVI and Connectivity ECUs. This role leads platform enablement, board bring-up, device driver development for multimedia and connectivity subsystems, and complex HW/SW debugging. The engineer ensures production readiness through DV and EOL phases, drives software quality improvements, and provides hands-on technical leadership and mentorship to strengthen in-house capabilities. Role Responsibilities: Platform Bring-Up & Device Driver Development • Lead board bring-up activities on Qualcomm SoC-based IVI / connectivity platforms, • Develop and debug kernel/device drivers and BSP components (QNX or Android/Linux), • Enable core subsystems (boot chain, clocks/resets, storage, power sequencing) needed for platform readiness, • Debug complex HW/SW interaction issues across drivers, firmware, and peripherals, • Perform root-cause analysis using tracing/logging and lab instrumentation; drive issues to closure, • Support integration topics spanning IVI ECU and connectivity/MCU components (e.g., power and wake coordination), • Support DV/PV and manufacturing readiness (flashing, diagnostics hooks, stability fixes, performance tuning), • Improve observability and robustness (error handling, watchdogs, recovery paths) for production deployments, • Mentor engineers and contribute to design/code reviews with an emphasis on quality and maintainability, • Drive best practices for driver architecture, testing strategies, and documentation, • Strong analytical and structured problem-solving skills for complex embedded systems, • Clear written and verbal communication; able to align across hardware, software, and validation teams, • Collaborative mindset; effective in cross-functional and cross-company environments, • Ownership-driven execution with a high bar for code quality, documentation, and reviews, • Strong experience in QNX (7.1/8.0) or Android BSP / Linux kernel development, • Hands-on experience with Qualcomm automotive SoCs (e.g., SA8155P, SA8255P, or similar), • Experience developing and debugging kernel drivers and/or HAL layers (C/C++), • Board bring-up experience including bootloaders, device trees, and low-level initialization, • Deep understanding of interrupts, DMA, memory mapping, clocks/resets, and power management, • Experience in automotive IVI / digital cockpit systems, • Experience with multimedia subsystems (audio, display, camera) and/or connectivity (USB, Ethernet, BT/Wi‑Fi), • Experience supporting DV, PV, and EOL / manufacturing phases, • Familiarity with NXP S32K microcontrollers and cross-ECU power coordination, • Experience with FreeRTOS or microcontrollers Salary range is dependent on factors such as geographical differentials, credentials or certifications, industry-based experience, qualification and training. In the city of Mountain View, California, the salary range for this position is $182,310 - 264,195. CARIAD, Inc. provides performance based merits and annual bonus along with a competitive benefits package. Benefits include medical, dental, vision, 401k with employer match and defined contribution plan, short and long term disability, basic life and AD&D insurance, employee assistance program, tuition reimbursement and student loan repayment plans, maternity and non-primary caregiver leave, adoption assistance, employee referral program and vacation and paid holidays. We also offer a unique vehicle lease program that covers registration and insurance fees. CARIAD is an Equal Opportunity Employer. We welcome and encourage applicants from all backgrounds, and do not discriminate based on race, sex, age, disability, sexual orientation, national origin, religion, color, gender identity/expression, marital status, veteran status, or any other characteristics protected by applicable laws. Employment with CARIAD Inc. is subject to export control and sanctions compliance. Some positions may involve access to technology and/or software source code subject to U.S. legal restrictions on release to certain foreign persons based on citizenship or permanent residence. To ensure compliance, applicants will be required to provide information for screening. Employment may be contingent on the outcome, including verification of U.S. citizenship or lawful permanent resident status, or confirmation that a license, exemption, or exception applies. CARIAD retains the discretion to decline to obtain a required license in any case. By applying, you acknowledge and agree to participate in this process.

Job Description About Etched Etched is building the world’s first AI inference system purpose-built for transformers - delivering over 10x higher performance and dramatically lower cost and latency than a B200. With Etched ASICs, you can build products that would be impossible with GPUs, like real-time video generation models and extremely deep & parallel chain-of-thought reasoning agents. Backed by hundreds of millions from top-tier investors and staffed by leading engineers, Etched is redefining the infrastructure layer for the fastest growing industry in history. Job Summary We’re seeking a skilled PCB Layout Engineer to join our dynamic team and contribute to our high-performance data center products. As a PCB Layout Engineer at Etched, you will play a crucial role in designing and optimizing printed circuit boards (PCBs) using Cadence Allegro PCB design tools. Your primary focus will be on high-speed signaling, including 100G applications, power distribution, large BGA ball-map breakouts and complex HDI PCB stack-ups for high-performance data center products. Your expertise will ensure that our products meet the highest standards of performance, reliability, and efficiency. Key Responsibilities * Lead the design and optimization of high-speed PCB layouts using Cadence Allegro, tailored for 100G signaling. Implement strategies for impedance matching, trace routing, and crosstalk mitigation, resulting in robust designs that meet the stringent performance demands of modern data centers. * Develop and implement power distribution networks for cutting-edge data center hardware. Design power planes, decoupling strategies, and thermal management solutions to support high-performance systems, ensuring reliability and efficiency under heavy operational loads. * Manage the design of complex High-Density Interconnect (HDI) PCB stack-ups for multi-layer boards. Integrate blind/buried vias and microvias to meet the advanced technological requirements of data center systems, enhancing signal integrity and achieving compact form factors. * Collaborate with electrical and mechanical engineering teams to integrate PCB designs within the overall system architecture. Provide key input during design reviews to optimize performance, ensure manufacturability, and align with system-level objectives in a data center environment. You maybe a good fit if you * Have a Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field. Advanced degrees or certifications are a plus. * Are equipped with 10 years of experience in PCB layout design with a focus on high-speed signaling, power distribution, and HDI stack-ups, ideally for high-performance data center products. * Demonstrate proficiency in Cadence Allegro PCB design tools * Command in-depth knowledge of high-speed digital design principles, including signal integrity and impedance control. * Have Experience with complex HDI PCB design and manufacturing processes. * Understand power distribution network design and thermal management techniques, particularly for data center applications. * Are excellent at problem-solving skills and attention to detail. We encourage you to apply even if you do not believe you meet every single qualification. Benefits * Medical, dental, and vision packages with generous premium coverage * $500 per month credit for waiving medical benefits * Housing subsidy of $2k per month for those living within walking distance of the office * Relocation support for those moving to San Jose (Santana Row) * Various wellness benefits covering fitness, mental health, and more * Daily lunch + dinner in our office How we’re different: Etched believes in the Bitter Lesson. We think most of the progress in the AI field has come from using more FLOPs to train and run models, and the best way to get more FLOPs is to build model-specific hardware. Larger and larger training runs encourage companies to consolidate around fewer model architectures, which creates a market for single-model ASICs. We are a fully in-person team in San Jose (Santana Row), and greatly value engineering skills. We do not have boundaries between engineering and research, and we expect all of our technical staff to contribute to both as needed. Compensation Range: $150K - $275K

Job Description Overview Protection Engineer – Power & Mechanical Systems Location: Mt View, Moffett Field CA. Status: Full-time Salary: $200K–$245K/year Clearance: Background check U.S. Citizenship required Make an Impact at NASA Ames Astrion/MEIS is seeking a highly skilled Protection Engineer (Power & Mechanical) to join our Space Systems division in support of NASA Ames Research Center’s Electrical Power Reliability Office (EPrO). In this role, you’ll directly contribute to the safety, reliability, and performance of NASA Ames’ high- and medium-voltage electrical distribution systems. From arc flash studies to protective relay programming and calibration, your work will help safeguard one of the world’s most advanced research facilities. REQUIRED QUALIFICATIONS / SKILLS: * PE License (Professional Engineer) * Ten (10)+ years’ experience in high- and medium-voltage design, relay coordination, and short-circuit analysis. * Proficiency in SKM software, arc flash calculation, and SEL microprocessor relay programming. * Expertise in both electromechanical and solid-state relays (calibration and setting). * Problem-solving mindset, clear communicator, and ability to thrive in on-site, hands-on work. * Flexibility to support after-hours, nights, or weekend outages when required. PREFERRED QUALIFICATIONS / SKILLS Perform arc flash and short-circuit calculations, relay programming, and relay setting. * Review, program, test, and calibrate protective relays and breaker trip settings. * Print and distribute arc flash safety labels for NASA Ames electrical systems. * Maintain and update SKM master models for building and drive power systems. * Provide protection system specifications and relay settings for new infrastructure projects. * Prepare wiring diagrams and schematics for protective relay installations. * Support relay technicians during planned and unplanned outages. * Maintain and review one-line diagrams for arc flash, short circuit, and relay analysis. * Ensure all device settings are properly stored in the EPrO database. This is your opportunity to apply your expertise in power protection engineering to support missions that directly enable NASA’s world-class science and space exploration programs. #CJ #LI-AD1

Job DescriptionFresh Consulting is a design-led, software development and hardware engineering company, offering end-to-end digital services to help companies innovate. We bring together amazing UX designers, sophisticated developers, digital strategists, and top-notch engineers to help companies create fresh experiences that connect humans, systems, and machines. We’ve been growing fast and need someone to help us continue to manage the delivery of high-quality work in a fast-paced environment. See more at freshconsulting.com Visit freshconsulting.com/portfolio to see our project work across several industries. View and apply to all jobs - or visit freshconsulting.com/careers Title: Senior Electronics Engineer Duration: 1 year with possible extension Location: Onsite in Sunnyvale, CA Benefits: Employee benefits at 100% including Medical, PTO, Holiday Pay, 401K Plan and much more! Hours: Minimum 40 Hours/Week Role: • Supervise the design, development, and testing of the manufacture of electrical equipment, including machinery controls, wiring, and lighting., • Review and approve the cost effectiveness, reliability and safety of certain design models., • Discuss estimates for time and cost to complete projects with clients., • Supervise the simulation and testing of machine/structure/system operation and monitor product quality., • Inspect completed installations and observe operations to ensure conformance to design and equipment specifications and compliance with operational and safety standards. Skills: • 10+ years of experience with Power Electronics: Familiarity with power electronic devices, such as power supplies, motor drives, and power conversion systems, is necessary for designing and developing efficient and reliable electrical systems., • Knowledge of Programming Languages: Familiarity with programming languages such as Python, or MATLAB can be useful for developing simulations and testing electrical systems., • Proficiency in Computer-Aided Design (CAD) Software: Experience with CAD software such as AutoCAD, SolidWorks, or Revit can be beneficial for creating detailed designs and models Education: Bachelor's in engineering or relevant experience. FRESH-- • Work on engineering and research assignments with F500 companies and startups., • The relationships that we have created with our clients are one of a kind., • We help solve problems in many technologies focusing on R&D, product development, and manufacturing., • We work at the most cutting-edge and latest technologies from AR/VR to Autonomous technologies., • Closely working with our clients, we believe that long term investments are extremely important to maintain the culture we together have created. We’re a handpicked team of Engineers, digital strategist, designers, and developers united together in creating a fresh experience. Whether we are strategizing, designing, developing, or analyzing, our integrated team works as an extension of yours to improve your impact, your usability, and your customer conversion. In the process, we collaborate with you to get to know your business, understand your industry, and incorporate your big ideas into memorable experiences that keep your customers coming back for more. Equal employment opportunity: All qualified persons will be considered for employment without regard to race, color, religion, sex, national origin, age, marital status, familial status, gender identity, sexual orientation, disability for which a reasonable accommodation can be made or any other status protected by law. Assistance will be gladly provided upon request for any applicant with sensory or non-sensory disabilities. Fresh Consulting is a participating E-Verify company. freshconsulting.com Compensation offered will be determined by factors such as location, level, job-related knowledge, skills, and experience. Range $80/hr - $90/hr. Powered by JazzHR mAgWFHUG9P

Job DescriptionSummary Our client is an award-winning engineering firm recognized as a “Best Place to Work” for the past 15 years. They are seeking a Senior Electrical Engineer – Healthcare with 10+ years of experience who is ready to take the next step in their career. This position is based in San Jose, CA, and offers the opportunity to lead complex healthcare projects within a collaborative and highly respected organization. Duties & Responsibilities * Pre-Design Engineering * Conduct field surveys to gather information for electrical system design and prepare site assessment reports. * Develop electrical schematic designs. * Design Engineering * Create power single line and riser diagrams. * Perform electrical calculations (arc flash, coordination, short circuit, voltage drop, load flow) using ETAP/SKM. * Select appropriate lighting fixtures and power equipment. * Complete lighting and power circuiting. * Design and coordinate lighting control systems. * Layout fire alarm devices according to International Fire Code and NFPA 72. * Develop fire alarm riser diagrams, calculations, and sequences of operation. * Prepare detailed plans, elevations, schedules, and design details. * Apply CAD/BIM standards and best practices. * Ensure compliance with California Electrical Code and Energy Standards for medium- and low-voltage systems. * Coordinate designs with mechanical, plumbing, telecom, civil, structural, and architectural disciplines. * Edit and finalize project specifications. * Project Management * Lead multiple large-scale projects, collaborating with senior engineers and sub-consultants. * Mentor junior and mid-level design engineers. * Independently prepare client proposals. * Support business development and strengthen client relationships. * Construction Administration * Review and respond to RFIs. * Evaluate equipment submittals. * Perform punch walks and prepare punch lists. Qualifications & Requirements * Education & Licenses * Bachelor’s or Master’s degree in Electrical Engineering. * Professional Engineer (PE) license preferred. * Experience * Minimum 10 years of relevant electrical engineering experience. * Proven ability to lead projects and manage design teams. * Demonstrated project management capabilities. * Skills & Technical Knowledge * Proficient with AutoCAD, ETAP/SKM, and Revit. * Knowledge of HCAI requirements. * Highly self-motivated, detail-oriented, and able to anticipate and resolve design issues. * Strong organizational skills and record-keeping. * Comfortable working in a fast-paced, dynamic environment. Benefits & Schedule * Hybrid Schedule: 3 days in office / 2 days remote • 13 company-paid holidays per year Medical, dental, and vision coverage * Employer-paid group life insurance * Optional supplemental insurance (Accident, Critical Illness, Pet Insurance) * Tuition and professional development assistance * 401(k) with 100% employer match up to 4% and immediate vesting

Job DescriptionAnalog/Mixed-Signal Design Engineer focusing on high-performance analog-to-digital and digital-to-analog converters. The successful candidate in this role will design high performance transistor level circuits starting from initial specification, through design and layout supervision, silicon evaluation and characterization to final product introduction to market. Qualifications • MS or PhD Degree in Electrical Engineering focused on Analog/Mixed-Signal circuit design., • Students who graduated recently or are close to graduation from their PhD program preferred., • Familiarity with high-speed, high-resolution analog-to-digital (ADC) or digital-to-analog (DAC) data converter design and building block circuits such as bandgap reference, op-amp, comparators, oscillators, DLL, PLL etc., • Must have experience with evaluating silicon on bench and familiarity with standard lab equipment, • Strong intuitive and analytical understanding of transistor-level circuit design including noise and mismatch analysis, • Experience with analog and digital behavioral modeling, • Familiar with Cadence schematic capture, virtuoso, Spectre and/or HSPICE circuit simulation tools, • Must be familiar with layout parasitic extraction tools and layout dependent impairments in advanced CMOS processes, • Must be able to work independently, create and adhere to schedules, • Must possess strong written and verbal communication skills with an ability to work with teams spread across geographic locations

Job DescriptionCompany Description “Invented for Life” drives us at Bosch and our vision of future mobility. Autonomous vehicles will change the way we move and at Bosch we are working on making this future a reality. We are now growing our team to solve some of the hardest automated driving problems, and are looking for experts for product engineering of AI-based Autonomous Driving systems. Job Description As the Senior Principal Engineer, E2E AI Training Framework for Autonomous Driving Systems, you will spearhead the development and optimization of the machinery that efficiently trains, optimizes, tests, and releases various E2E AI-based products (e.g. parking, driving, interior sensing) for different trim levels (entry, mid and high) within our L2+ ADAS stack. You will be responsible for defining and driving the technological roadmap for the AI machinery, ensuring its scalability, reliability, and performance. The ideal candidate must have prior industry experience in releasing AI-based L2+ systems, with a proven track record of translating innovative research into production-grade solutions. Key Responsibilities • Define and drive execution of the technical roadmap and strategy for the E2E AI machinery, including training pipelines, optimization techniques, simulation and MLOps tooling., • Oversee the design, development, and testing of the E2E AI machinery and its interaction with data sources, model repositories, and development targets., • Collaborate closely with other functional tech leads (e.g. data engineering, infrastructure) to define and drive the overall architecture of the AI machinery ecosystem., • Guide the set-up of a development framework that enables fast evaluation and integration of emerging E2E AI solutions., • Guide the transition from research prototypes to production-ready solutions, ensuring performance optimization on automotive-grade hardware and scalability., • Leverage your prior industry experience in launching AI-based L2+ systems to implement best practices in system validation, testing (SIL/HIL), and continuous improvement., • Mentor and lead a high-caliber team of AI scientists and engineers, fostering a culture of innovation, collaboration, and technical excellence. Qualifications Basic Qualifications: • Master’s degree or Ph.D in Computer Science, Robotics, Electrical Engineering, AI, or a closely related field with a focus on autonomous systems, • 10+ years of experience in software development and system engineering for autonomous driving or ADAS applications, • Proven industry experience in releasing AI-based L2+ systems, with a strong track record of successful product deployments, • Deep knowledge of E2E AI stack solutions and training algorithms, including reinforcement learning, and imitation learning, as well as motion control and optimization techniques, • Deep knowledge of AI frameworks such as TensorFlow and PyTorch, • Deep knowledge in model optimization and embedded deployment of E2E AI stacks to embedded automotive hardware, • Deep knowledge of cloud-based scalable training pipelines, MLOps, and CICD for training AI models with large-scale fleet datasets, • Experience with simulation tools and testing methodologies (SIL/HIL) for autonomous systems., • Proficiency in programming languages such as Python and C++., • Strong understanding of automotive safety standards (ISO 26262, ASIL) and regulatory requirements for ADAS., • Exceptional leadership and communication skills, with the ability to inspire and manage cross-functional teams., • Strategic thinker with strong problem-solving abilities and a passion for innovation in autonomous driving technology. Additional Information The U.S. base salary range for this full-time position is $240,000 - $320,000. Within the range, individual pay is determined based on several factors, including, but not limited to, work experience and job knowledge, complexity of the role, job location, etc. This range does not include annual bonus percentage nor any other monetary considerations for the total compensation package. Your Recruiter can share more details about the specific salary range for this position during the interview process. In addition to your base salary, Bosch offers a comprehensive benefits package that includes health, dental, and vision plans; health savings accounts (HSA); flexible spending accounts; 401(K) retirement plan with an attractive employer match; wellness programs; life insurance; long term disability insurance; paid time off; parental leave. Pay ranges included in the postings, when included, generally reflect base salary; certain positions may include bonus, or additional benefits. Equal Opportunity Employer, including disability / veterans *Bosch adheres to Federal, State, and Local laws regarding drug-testing. Employment is contingent upon the successful completion of a drug screen and background check. Candidates who have been offered the position must pass both screenings before their start date. #LI-JM1

Job Description ABOUT THE ROLE As Senior Firmware Engineer, you will be a key player in the architecture and the full lifecycle development of an AI platform system, including requirements, design, code, and test. In this role, you will be part of a team developing next generation AI/ML solutions using Client's AI Photonic Fabric Architecture. You will be responsible for developing production-grade firmware for Client's photonic fabric product lineup and developing firmware APIs for resource management and optimization. You will collaborate closely with hardware and software teams to implement the communication management software for different Photonic Fabric use cases. ESSENTIAL DUTIES AND RESPONSIBILITIES • Demonstrate best practices in software development and documentation to deliver high-quality software on tight schedules while meeting all requirements., • Actively engage in code reviews, discussions to share knowledge, and improve code quality, • Participate in gathering technical requirements, contributing to firmware and software design specifications, • Provide support to both internal and external SW and HW development teams, • Provide guidance on test plans for lab characterization once design comes back from fab QUALIFICATIONS • Bachelor's degree with 8+ years of experience, or Master's degree with 6+ years of experience in Computer Science, Electrical Engineering, Information Technology or a related technical field., • At least 5 years of hands-on experience in firmware or embedded software development., • Deep proficiency in C (required) and/or C++ (highly desired) for embedded systems., • Demonstrated experience with microcontroller architectures (e.g., ARM Cortex-M/R/A, ESP32, RISC-V) and their peripherals. You understand the nuances of clocking, interrupts, DMA, and memory-mapped registers., • Proven ability to debug complex hardware/firmware issues on the bench using:, • In-circuit debuggers (JTAG/SWD) with GDB., • Oscilloscopes: Experience reading signal waveforms, verifying timing, and identifying glitches., • Logic Analyzers: For decoding digital bus traffic (SPI, I2C, UART)., • Multimeters/Power Supplies: For basic electrical troubleshooting., • Experience in writing bare-metal drivers and working directly with device registers., • Familiarity with version control systems (Git preferred) and bug tracking tools., • Strong problem-solving skills with an investigative, "get to the bottom of it" mindset., • Excellent communication skills, both written and verbal, for collaborating with hardware, QA, and software teams. California Pay Range$185,000—$225,000 USD

Job Description Who We Are Nuro is a self-driving technology company on a mission to make autonomy accessible to all. Founded in 2016, Nuro is building the world's most scalable driver, combining cutting-edge AI with automotive-grade hardware. Nuro licenses its core technology, the Nuro Driver™, to support a wide range of applications, from robotaxis and commercial fleets to personally owned vehicles. With technology proven over years of self-driving deployments, Nuro gives the automakers and mobility platforms a clear path to AVs at commercial scale, empowering a safer, richer, and more connected future. About the Role We are looking for a skilled engineer to help build and maintain release and (OTA) update infrastructure. Our team, Fleet connectivity, builds the infrastructure to connect and update Nuro's fleets. Our engineers work on the tech stack across the cloud and robots to build reliable, efficient systems for network connectivity, telemetry, and software updates, which is critical to the advancement and scale up of our AV vision. About the Work • Design, develop, test, deploy, maintain, and improve software for our mission critical systems like release infrastructure and OTA updates., • Manage individual project priorities, deadlines, and deliverables, internally and cross team., • Write well-designed, testable code that aligns with our code quality standards., • Track and improve performance of our release system, defining and tracking KPIs, and proposing and implementing optimizations to improve the cost, times, and space of builds., • Develop test and validation programs to ensure the robustness of system architecture and data flows., • 5+ years industrial experience with large-scale distributed systems., • Strong proficiency in C++ or Go., • Knowledge of Unix/Linux environments and Bash scripting., • Ability to turn high-level requirements into a detailed, cohesive system design., • Experience with data structures, algorithms, and software design optimized for large-scale distributed systems., • Bachelor's degree in Computer Science, Electrical Engineering, or a closely related field. Bonus Points • Knowledge of SQL, • Experience working with GCP, • UI experience, • Prior experience with OTA updates and execution frameworks like Temporal., • Python programming experience Bullet points At Nuro, your base pay is one part of your total compensation package. For this position, the reasonably expected base pay range is between $160,360 and $240,540 for the level at which this job has been scoped. Your base pay will depend on several factors, including your experience, qualifications, education, location, and skills. In the event that you are considered for a different level, a higher or lower pay range would apply. This position is also eligible for an annual performance bonus, equity, and a competitive benefits package. At Nuro, we celebrate differences and are committed to a diverse workplace that fosters inclusion and psychological safety for all employees. Nuro is proud to be an equal opportunity employer and expressly prohibits any form of workplace discrimination based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, veteran status, or any other legally protected characteristics. #LI-DNP

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are looking for a highly skilled Senior Analog IC Layout Design Engineer to join our dynamic team. The ideal candidate will have extensive experience in designing and optimizing the layout of analog and mixed-signal integrated circuits (ICs). You will work closely with circuit design engineers to translate schematics into high-performance, manufacturable layouts, ensuring adherence to design rules and specifications.What you will do: • Perform full custom analog and mixed-signal IC layout design, including floor planning, placement, and routing of circuits such as amplifiers, data converters, voltage regulators, and RF components, • Collaborate closely with circuit design engineers to understand design specifications and ensure high-performance layout implementations, • Optimize layouts for performance metrics such as area, power, noise, parasitics, and matching, • Perform DRC (Design Rule Check), LVS (Layout Versus Schematic), and parasitic extraction using industry-standard tools (e.g., Cadence Virtuoso, Mentor Graphics Calibre), • Conduct peer reviews of layout work, provide feedback, and mentor junior layout engineers, • Work with process and foundry engineers to understand and integrate process limitations and requirements into the layout design, • Ensure designs meet manufacturability standards and participate in post-layout simulation and validation, • Develop and maintain layout methodologies and documentation for efficient and consistent design practicesWhat you bring to this role:, • 7+ years of experience in custom analog IC layout design, • Strong proficiency in using CAD tools for layout design (e.g., Cadence Virtuoso, Mentor Graphics Calibre, Synopsys IC Compiler, etc.), • Extensive experience with analog layout techniques for minimizing noise, matching, and parasitic effects, • Deep understanding of semiconductor process technologies and design rules, • Proven track record of successful tape-outs of complex analog/mixed-signal ICs, • Excellent attention to detail and a methodical approach to design and validation, • Strong communication skills and ability to work effectively in cross-functional teamsBonus points for the following:, • Bachelor’s or Master’s degree in Electrical Engineering, Microelectronics, or a related field, • Experience with RF IC layout design, • Familiarity with scripting (e.g., Skill, Python) to automate layout tasks and improve productivity • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are seeking a Hardware Test Engineer with strong experience in Java-based hardware test automation, SPI/I2C protocol programming, and custom board testing. What you will be doing: • Develop and maintain Java-based hardware test applications., • Write tools interfacing with devices over SPI and I2C., • Perform hardware validation, functional testing, and debugging., • Execute board bring-up on custom PCB designs., • Collaborate with firmware engineers to design test protocols., • Use lab equipment including oscilloscopes, logic analyzers and waveform analyzers., • Create documentation, test procedures, and reports. What you bring to this role:, • Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or related field, • Strong Java programming for test automation., • SPI and I2C protocol programming experience., • Understanding of C/C++ firmware interactions., • Hands-on custom board testing experience., • Ability to debug hardware signals and communication issues., • Familiarity with microcontrollers such as ARM, STM32, PIC, or ESP32., • USB/UART/CAN communication experience., • Board rework and soldering skills., • Firmware experience for test mode support., • JavaFX or Swing UI experience. Bonus points for the following:, • Advanced knowledge of ATE and Advantest 93k • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The Staff Power Electrical Engineer will participate in all aspects of the development and test of avionics hardware for E-Space satellites. The ideal candidate has 10+ years of experience in power electronics design including schematic capture, PCB layout, and testing. This position will report to the Director of Electrical Engineering and will work closely with the Electrical, Software, and Systems Engineering teams. The successful candidate will be based in our Saratoga, CA office. What you’ll be doing: • Own the development of a spacecraft solar-battery charging system from clean sheet to flight., • Develop and implement PCBA requirements, use-cases, and system integration., • Schematic capture and PCBA layout for solar power, voltage regulation, load management, fault protection, power transmission, telemetry, and other circuits using Altium Designer., • Circuit analysis including power related, SWaP, tolerance, and reliability related., • PCBA design verification testing, qualification testing, and system integration testing., • Lead design reviews for inter-disciplinary audiences., • Manufacturing and flight support as needed. What you bring to this role:, • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or equivalent., • 10+ years of experience in power electronics design including schematic capture, PCB layout, and testing., • Expertise in solar power, voltage regulation, load management, fault protection, power transmission, analog instrumentation, and digital circuits., • Skilled at schematic capture and layout of complex PCBAs., • Skilled at performing circuit analyses in SPICE and Excel., • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering iron, etc., • Demonstrated success working in a dynamic environment. Bonus points for the following:, • Master’s degree in Electrical Engineering, Computer Engineering, or equivalent., • Experience designing for space environments including radiation impacts and mitigation., • Proficiencywith Altium Designer., • Experience designing rigid-flex PCBs and general electro-mechanical design familiarity., • FPGA design skills. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. Are you ready to redefine the future of wireless communications? At E-Space, we’re at the forefront of bridging terrestrial and satellite networks. We are seeking a passionate Wireless Modem Implementation Engineer with a strong background in DSP-based modem design—preferably with hands-on experience using NXP Layerscape modems—and extensive expertise in 5G physical layer (PHY) and Layer 1 software implementation. If you thrive on innovative challenges and enjoy working on cutting-edge technology, this role is for you. As a Wireless Modem Implementation Engineer, you will be responsible for architecting and implementing advanced Layer 1 modem software for next-generation wireless communication systems. You will leverage your expertise in digital signal processing, 5G PHY, and DSP modems to develop robust solutions that power seamless connectivity across diverse networks. This role involves close collaboration with multidisciplinary teams across hardware, software, and system integration to deliver state-of-the-art wireless solutions.What you will do: • Design & Development, • Develop and implement sophisticated physical layer algorithms tailored for DSP-based wireless modems., • Lead the design and coding of Layer 1 modem software, with a strong emphasis on 5G PHY implementation and performance optimization., • Utilize your in-depth knowledge of DSP-based modems, such as NXP Layerscape modems, to integrate and enhance modem functionalities in software, • System Integration & Testing, • Collaborate with cross-functional teams to ensure seamless integration of modem software with firmware and other system components., • Develop comprehensive test strategies, simulate real-world scenarios, and validate performance under diverse conditions., • Identify performance bottlenecks and deploy innovative debugging and optimization techniques to enhance system efficiency., • Analysis & Reporting, • Conduct detailed performance analyses, including link budget assessments, throughput, latency, and error rate evaluations., • Document design methodologies, test results, and system enhancements to support continuous improvement and knowledge sharing., • Provide technical support during system integration, design reviews, and field trials.What you bring to this role:, • Bachelor’s or Master’s degree in Electrical Engineering, Telecommunications, or a related field., • Demonstrable experience in wireless modem design, including DSP-based implementations and 5G PHY development., • Extensive hands-on expertise with Layer 1 modem software development and integration., • Solid understanding of digital signal processing, communication theory, and wireless standards (e.g., 4G, 5G, 5G NR, LTE)., • Proficiency in programming/scripting languages such as C/C++, Python, or MATLAB., • Excellent problem-solving skills, with a proven track record of troubleshooting and optimizing complex communication systems., • Strong collaboration and communication skills, essential for working within cross-functional teams.Bonus points for the following:, • Experience with modern coding techniques such as LDPC, Turbo Codes, or Polar Codes., • Prior exposure to simulation tools (e.g., MATLAB, Simulink) and real-time system testing., • Familiarity with software-defined radio (SDR) platforms and related development tools. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job Description Kodiak Robotics, Inc. was founded in 2018 and has become a leader in autonomous ground transportation committed to a safer and more efficient future for all. The company has developed an artificial intelligence (AI) powered technology stack purpose-built for commercial trucking and the public sector. The company delivers freight daily for its customers across the southern United States using its autonomous technology. In 2024, Kodiak became the first known company to publicly announce delivering a driverless semi-truck to a customer. Kodiak is also leveraging its commercial self-driving software to develop, test and deploy autonomous capabilities for the U.S. Department of Defense. We are looking for an Embedded Software Engineer with a background in embedded systems who understands how to ship mission critical software. The role will collaborate across hardware and software teams to design the low level devices that interface with our truck systems, ensure reliable operations of large robots, and provide cutting edge functionality to real customers. The role will bring the best of modern software engineering to ensure a high level of safety and performance. In this role, you will: • Collaborate with hardware EE on design and test of high reliable hardware systems, • Collaborate with software engineering on architecture, optimizations and reviews, • Contribute to hardware specifications to ensure test coverage and fault detection, • Participate in hands-on hardware bring-up in the engineering lab using analyzers and probes, • Debug common truck functions on the vehicles (Driver interfaces, Braking, Steering), • Develop software for embedded platforms (x86, ARM) in C/C++, • Develop software for sensors. Evaluation and production (Camera, Radar, Lidar, IMU), • Strong technical background. BS or MS, or equivalent experience in Computer Science, Electrical Engineering, or Computer Engineering, • 8+ years of software development experience, ideally within the automotive, aerospace or a related industry, • Extensive programming experience in C++, • Deep knowledge of embedded programming platforms, • Good understanding of networking fundamentals, • Experience with implementation and on-vehicle debugging of low level hardware buses such as I2C, CAN, SPI, and UART, • Experience with high speed hardware communication such as PCIe and Automotive Ethernet, • Hands on. You are just as comfortable getting your hands dirty analyzing a subsystem in the shop as when using a keyboard., • Great communicator. You have experience writing clear, concise, and detailed documentation, • Competitive compensation package including equity and annual bonuses, • Excellent Medical, Dental, and Vision plans through Kaiser Permanente, Cigna, and MetLife (including a medical plan with infertility benefits), • MetLife Legal Services, Identity & Fraud Protection, Hospital Indemnity Insurance, Accident Insurance, & Critical Illness Insurance, • Flexible PTO, 10 paid holidays, and generous parental leave policies, • Our office is centrally located in Mountain View, CA, • Office perks: dog-friendly, free catered lunch, a fully stocked kitchen, and free EV charging, • Long Term Disability, Short Term Disability, Life Insurance, • Wellbeing Benefits - Headspace through Cigna, Calm through Kaiser, One Medical, Gympass, Spring Health through Cigna, Rula (mental health navigation), • Fidelity 401(k), • Commuter, FSA, Dependent Care FSA, HSA, • Various incentive programs (referral bonuses, patent bonuses, etc.) The pay range listed below reflects the base salary in our SF/Silicon Valley location, across several internal levels. Actual starting pay will be based on job-related factors including: work location, experience, relevant training, education, skill level and performance during interview. Total compensation at Kodiak includes base pay, equity, bonus and a competitive benefits package California Pay Range$200,000—$250,000 USDAt Kodiak, we strive to build a diverse community working towards our common company goals in a safe and collaborative environment where harassment of any kind is strictly prohibited. Kodiak is committed to equal opportunity employment regardless of race, ethnicity, religion, gender identity, sexual orientation, age, disability, or veteran status, or any other basis protected by applicable law.In alignment with its business operations, Kodiak adheres to all relevant statutes, regulations, and administrative prerequisites. Accordingly, roles that carry more sensitive requirements may be limited to candidates that can satisfy additional scrutiny and eligibility for such positions may hinge on verification of a candidate's residence, U.S. person status, and/or citizenship status. Should the position require, and Kodiak determines that a candidate's residence, U.S. person status, and/or citizenship status necessitate an export license, bar the candidate from the position, or otherwise fall under national security-related restrictions, Kodiak will consider the candidate for alternative positions unaffected by such restrictions, under terms and conditions set forth at Kodiak's sole discretion, or, as an alternative, opt not to proceed with the candidate's application. If applicable, Kodiak may provide visa sponsorship for eligible candidates.We use a third-party AI tool (Endorsed) to assist in the initial screening of applications. As part of the evaluation process, we provide Endorsed with job requirements and candidate-submitted applications. Final hiring decisions are made by our human recruitment team, and no automated system makes the ultimate decision regarding hiring. Certain features of the platform may qualify it as an Automated Employment Decision Tool (AEDT) under applicable regulations. We began using Endorsed on January 1, 2026. You can review the independent bias audit report covering our use of Endorsed . By submitting your application, you acknowledge that your application may be processed by AI systems as part of the screening and selection process. If you have any questions or would like to request a separate review of your application, please contact with "Separate Review Request" in the email subject line.

Job DescriptionSummary We are seeking a proactive and detail-oriented Project Engineer to support our commercial Mechanical, Electrical, and Plumbing (MEP) construction projects. This role offers an excellent opportunity to grow your career in a design-build environment, gaining hands-on experience in project coordination, estimating, scheduling, and technical support. Key Responsibilities * Support internal teams across engineering, purchasing, construction, and accounting departments to ensure smooth project execution. * Coordinate procurement of materials, delivery timelines, and field installation processes. * Maintain organized and up-to-date documentation, including RFIs, submittals, purchase orders, daily reports, and procurement logs. * Track labor hours, material usage, and project costs, updating progress reports for management. * Attend kick-off, progress, and subcontractor coordination meetings, providing clear communication across teams. * Conduct site visits to assess installation progress, identify and resolve field challenges, and ensure alignment with design intent. * Build and maintain collaborative relationships with subcontractors, clients, vendors, and project stakeholders. * Participate in ongoing efforts to improve internal processes, workflows, and project delivery. Qualifications Education: * Bachelor’s degree in Construction Management, Engineering, or a related technical field. Experience: * Minimum 2+ years of experience in project coordination or project engineering, preferably within MEP construction or design-build environments. Skills: * Strong communication, problem-solving, and organizational skills. * Proficient in Microsoft Office Suite (Excel, Word, Outlook); familiarity with AutoCAD and Bid Tracer is a plus. * Ability to interpret construction drawings and coordinate with cross-functional teams. Requirements: * Ability to travel to job sites in the local region. * Must have a valid driver’s license and clean driving record. * Capable of performing physical site inspections, including climbing ladders and navigating active job sites. Compensation & Benefits * Competitive salary based on experience. * Comprehensive medical, dental, and vision insurance. * 401(k) plan with company match. * Employee Stock Ownership Plan (ESOP) participation. * Paid holidays, vacation, and sick leave. * Access to training programs, mentorship, and career development within a growing, employee-owned company.

Job DescriptionCompany Description Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today’s needs and tomorrow’s next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we’re living in and that we have the power to shape. Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality. Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward. Job Description Sandisk is seeking an accomplished Product Development Engineer with extensive expertise in AI/ML to lead innovative projects in NAND Flash test data analysis, yield optimization, and test time reduction. The ideal candidate will combine hands-on technical proficiency with leadership skills, driving impactful solutions and mentoring junior engineers. This role offers the opportunity to work collaboratively across disciplines, advancing the future of semiconductor manufacturing through cutting-edge AI/ML applications. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Build and evaluate AI/ML models to analyze high volumes of semiconductor test data for yield optimization and test time reduction., • Design end-to-end ML pipelines, including data preprocessing, feature engineering, model training, validation, and deployment, • Lead and manage projects with accountability, technical proficiency, and a high degree of ownership., • Provide mentorship to junior engineers by delivering technical guidance, sharing industry’s best practices, and facilitating their professional development, • Explore physics-informed machine learning with white box models and interpretable AI, • Collaborate with domain experts and product owners to translate business and manufacturing test problems into machine learning solutions, • Share findings through technical reports, presentations, internal publications, or patentsQualifications REQUIRED: • Bachelor's or Master's degree in Electronics & Electrical Engineering/Computer Engineering, Data Science with 8+ years of experience in AI/ML development and application, • Strong foundation in machine learning and statistical modeling, • Experience with SQL and Python, • Strong data handling and analysis libraries (e.g., NumPy, Pandas, scikit-learn), • Ability to work independently and collaboratively in a research-driven engineering environment, • Excellent verbal and written communication skills, • Experience in MLOps including CI/CD for ML, reliable deployment workflows, and managing the model at all stages of the lifecycle, • Good problem-solving and analytical skills, • Experience working with Large Language Models (LLMs), such as:, • Model fine-tuning, • Prompt engineering, • Retrieval-Augmented Generation (RAG), • Experience in Semiconductor manufacturing industry Additional Information Sandisk is committed to providing equal opportunities to all applicants and employees and will not discriminate against any applicant or employee based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person’s gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person’s assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the "Know Your Rights: Workplace Discrimination is Illegal” poster. Our pay transparency policy is available here. Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. Based on our experience, we anticipate that the application deadline will be 05/13/2026 (3 months from posting), although we reserve the right to close the application process sooner if we hire an applicant for this position before the application deadline. If we are not able to hire someone from this role before the application deadline, we will update this posting with a new anticipated application deadline. #LI-RT1 Compensation & Benefits Details • An employee’s pay position within the salary range may be based on several factors including but not limited to (1) relevant education; qualifications; certifications; and experience; (2) skills, ability, knowledge of the job; (3) performance, contribution and results; (4) geographic location; (5) shift; (6) internal and external equity; and (7) business and organizational needs., • The salary range is what we believe to be the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range and this range is only applicable for jobs to be performed in California, Colorado, New York or remote jobs that can be performed in California, Colorado and New York. This range may be modified in the future., • You will be eligible to participate in Sandisk's Short-Term Incentive (STI) Plan, which provides incentive awards based on Company and individual performance. Depending on your role and your performance, you may be eligible to participate in our annual Long-Term Incentive (LTI) program, which consists of restricted stock units (RSUs) or cash equivalents, pursuant to the terms of the LTI plan. Please note that not all roles are eligible to participate in the LTI program, and not all roles are eligible for equity under the LTI plan. RSU awards are also available to eligible new hires, subject to Sandisk's Standard Terms and Conditions for Restricted Stock Unit Awards., • We offer a comprehensive package of benefits including paid vacation time; paid sick leave; medical/dental/vision insurance; life, accident and disability insurance; tax-advantaged flexible spending and health savings accounts; employee assistance program; other voluntary benefit programs such as supplemental life and AD&D, legal plan, pet insurance, critical illness, accident and hospital indemnity; tuition reimbursement; transit; the Applause Program, employee stock purchase plan, and the Sandisk's Savings 401(k) Plan., • Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law.

Job DescriptionnEye.ai, a well-funded optical switch startup, is poised to revolutionize the future of data centers. nEye’s MEMS-based silicon photonics optical circuit switches (OCS) eliminate critical bottlenecks in AI processing by enabling direct optical connections among thousands of GPUs and memory units. The company's SuperSwitch is an ultra-low power consumption, high radix, compact chip-scale design, offering hyperscale data centers enhanced performance, efficiency, and scalability. Job Overview As a Senior MEMS Design Engineer at nEye.ai, you will be responsible for the design, simulation, and optimization of MEMS devices that are critical components of our optical circuit switches. This role involves both technical execution and collaboration with multi-disciplinary teams. You'll work closely with Silicon Photonics, Mechanical, and Process Engineers to ensure our MEMS structures are not only high-performing but also robust and reliable for high-volume manufacturing. Your expertise in multi-physics modeling will be key to optimizing our designs and solving complex challenges.Key Responsibilities • MEMS Design & Optimization: Design and model MEMS structures, focusing on performance, reliability, and manufacturability., • Multi-Physics Simulation: Utilize multi-physics models (e.g., mechanical, electro-mechanical, fluid dynamics) to simulate device behavior and optimize designs., • Collaboration & Problem-Solving: (1) Work with internal teams to understand failure mechanisms and design for low FIT (failures in time) rates. (2) Troubleshoot fabrication issues and act as a liaison between the design team and foundry process engineers to resolve problems., • Product Lifecycle: (1) Contribute to the full product lifecycle, from initial concept and design through to high-volume manufacturing and qualification testing. (2) Design for Yield improvementMinimum Qualifications, • Education: Master's or PhD degree in Applied Physics, Electrical Engineering, Mechanical Engineering, Materials Science, or a related technical field., • Experience: 5+ years of hands-on experience in MEMS design with a focus on product experience., • Experience with the design and fabrication of devices with nano-scale features., • Demonstrated experience in optimizing MEMS structures for performance and reliability using multi-physics models., • Deep understanding of failure mechanisms in MEMS devices., • Proficiency with 3D-CAD software and Finite Element Simulation software (e.g. COMSOL)., • Experience in analytical mechanical design focusing on stress/strain relationships in MEMS designs and wafer processing, • Deep knowledge of semiconductor fabrication processes and cleanroom practices.Preferred Skills, • Experience with the design and fabrication of optical MEMS structures and the surface-micromachining process., • Experience in MEMS design for reliability., • Experience with advanced packaging technologies and their integration into the foundry process., • Experience in a fabless or semiconductor design company.

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. The Staff Avionics RF Electrical Engineer will participate in all aspects of the development and test of RF hardware forE-Space satellite communications equipment. The ideal candidate has 10+ years of experience in RF electrical design including schematic capture, PCB layout, and testing. This position will report to the Director of Electrical Engineering and will work closely with variousengineering teams. The successful candidate will be based in our Saratoga, CA office.What you’ll be doing: • Own RF PCBA designs from clean sheet to flight., • Develop PCBA requirements, architectures, and con-ops in collaboration with other engineering disciplines., • Design of RF circuits including amplifiers, filters, high speed DACs/ADCs, path tuning, simulations, etc, • Schematic capture and PCB layout using Altium Designer., • Circuit analysis and simulations including RF signal characteristics, power, tolerance, and reliability related., • PCBA design verification testing, qualification testing, and system integration testing., • Lead design reviews for inter-disciplinary audiences., • Production manufacturing support as needed. What you bring to this role:, • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or equivalent., • 10+ years of experience in RF electrical circuit design, analysis, simulation, schematic capture, PCB layout, and testing., • Design proficiency with LNAs, PAs, filtering, mixers, signal modulation, etc., • Proficiency with schematic capture and layout of complex PCBs., • Proficiency performing circuit simulation and analysis analyses in RF toolstools such as HFSS, ADS, SPICE, and Excel., • Proficiency with electronic lab equipment such as VNAs, spectrum analyzers, oscilloscopes, power supplies, soldering iron, etc., • Demonstrated success working in a dynamic environment. Bonus points for the following:, • Master’s degree in Electrical Engineering, Computer Engineering, or equivalent., • Experience with antenna design and wireless RF links., • Experience designing power, digital, and analog circuits., • Experience designing for space environments including radiation impacts and mitigation., • Familiarity with Altium Designer., • FPGA design skills. • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionAbout us:Aeva’s mission is to bring the next wave of perception to a broad range of applications from automated driving to industrial robotics, consumer electronics, consumer health, security, and beyond. Aeva is transforming autonomy with its groundbreaking sensing and perception technology that integrates all key LiDAR components onto a silicon photonics chip in a compact module. Aeva 4D LiDAR sensors uniquely detect instant velocity in addition to 3D position, allowing autonomous devices like vehicles and robots to make more intelligent and safe decisions. Role Overview:Aeva is seeking to hire a talented and motivated Sr/Staff Hardware Engineer to join our EE HW team. The EE HW team owns the design, build and bring up of Aeva’s mixed-signal PCBs. As a Hardware Engineer, you may be responsible to develop a System Architecture of our LiDAR system based on product requirements. You will be working closely with all EE engineers to define the individual PCBs, their function, and interconnections.What you’ll be doing: • Break down product requirements into an architecture and EE PCB designs and their interconnections, • Work closely with Electrical Engineers as well as cross-functional engineering and product teams to review their designs in terms of function and layout placement, • Optimize architecture to reduce HW and SW complexity as well as optimize for cost and power consumption, • Direct ownership of PCBs and sub-systems of a LiDAR from schematic design through layout, fabrication and bringupWhat you have:, • BS, Masters or PH.D. degree in Electrical Engineering or related field, • 6+ years experience in HW design from architecture to implementation, prototyping and bringup all the way to high volume production, • Deep understanding of HW components, their interfaces and SW controls, • Good understanding of high speed designs with a variety of communication protocols (I2C, SPI, UART, Ethernet, PCIE etc), • Demonstrated experience and technical leadership in data acquisition subsystems including high-speed ADCs, high-precision analog sense paths and high-speed serial interfaces, • Demonstrated experience utilizing commercial SI/PI software tools, • Released several complex, multi-layer PCB designs into high volume production, • Be an active team member working closely with other EE engineers and other groups, • Ability to technically lead a small team of HW engineers is a plus, • Experience in motion control systems, design and theory is a plus

Job DescriptionReady to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are seeking an experienced Senior Digital Backend Layout Engineer specializing in Place and Route (P&R) to join our semiconductor engineering team. In this role, you will lead and execute the backend flow of digital ASIC designs from synthesis through to GDSII. Your primary focus will be on optimizing layout for area, power, and performance while ensuring DRC/LVS compliance. You’ll work closely with design and verification engineers to integrate frontend logic with backend physical design, meeting strict deadlines and quality standards for advanced semiconductor technologies.What you will be doing: • Physical Implementation: Manage end-to-end backend physical design flow, including floor planning, placement, routing, and timing optimization, • Power and Performance Optimization: Optimize layout for power efficiency, timing closure, and area, ensuring alignment with project specifications and industry standards, • Timing Analysis and Closure: Perform Static Timing Analysis (STA) and drive timing closure, working collaboratively with frontend and verification teams, • DRC/LVS Compliance: Ensure designs are DRC (Design Rule Check) and LVS (Layout Versus Schematic) compliant using industry-standard tools, • Tool Utilization and Scripting: Proficiency with industry-standard EDA tools for P&R, STA, and verification (e.g., Cadence Innovus, Synopsys ICC2, Mentor Calibre) and scripting languages (e.g., TCL, Python, Perl) for flow customization and automation, • Cross-functional Collaboration: Work closely with digital design, verification, and RF/analog layout teams to ensure successful integration of all components, • Documentation and Reporting: Maintain accurate and up-to-date documentation of design methodologies, processes, and results, reporting to project leads and managementWhat you bring to this role:, • 5+ years in digital backend design, with a strong track record of successful P&R and tape-out in advanced process nodes (e.g., 7nm, 5nm), • Proficiency with physical design tools such as Cadence Innovus, Synopsys ICC2, Mentor Calibre, etc., • Strong knowledge of timing analysis, clock tree synthesis, IR drop analysis, and EM checks, • Familiarity with physical verification techniques, including DRC, LVS, and PEX, • Scripting experience with TCL, Python, or Perl for tool automation, • Strong verbal and written communication skills to collaborate across teams and present complex technical concepts effectivelyBonus Points: • An opportunity to really make a difference• Sustainability at our core• Fair and honest workplace• Innovative thinking is encouraged• Competitive salaries• Continuous learning and development• Health and wellness care options• Financial solutions for the future • Optional legal services (US only)• Paid holidays• Paid time off

Job DescriptionSalary: Sr Transformer Electrical Engineer Role Summary The Senior Transformer Engineer is responsible for the design, engineering, validation, and technical leadership of 69kV-220kV transformers systems. This role provides subject-matter expertise across the full product lifecyclefrom concept and specification through manufacturing, testing, installation support, and commissioningwhile ensuring compliance with applicable standards, customer requirements, and safety regulations. Responsibilities • Lead the design and trial production of 69kV-220kV transformers, adhering to IEEE standards. Independently complete order calculations and submit production drawings., • Participate in sample production, conducting comprehensive tests to verify performance and technical specifications. Address any issues encountered during the trial production process., • Bachelor's degree or higher in Electrical Engineering and Automation, preferred. Other engineering disciplines will be considered. Minimum of 10 years of experience in transformer design, with the ability to independently manage projects., • Thorough understanding of transformer structure, extensive knowledge of manufacturing processes and workflows. Proficient in CAD software, capable of independently producing detailed drawings., • Ensure compliance with relevant international and regional standards (e.g., IEC, IEEE, ANSI, UL, NFPA, NEC, CSA)., • Support product certification, type testing, routine testing, and factory acceptance testing (FAT)., • Collaborate with manufacturing, supply chain, and quality teams to ensure manufacturability and cost-effective designs., • Support root cause analysis and corrective actions for quality, reliability, or field issues., • Mentor and guide junior engineers and designers as/when needed., • Review and approve engineering deliverables., • Bachelor's degree or higher in Electrical Engineering and Automation, preferred. Other engineering disciplines will be considered. Minimum of 10 years of experience in transformer design, with the ability to independently manage projects., • Thorough understanding of transformer structure, extensive knowledge of manufacturing processes and workflows. Proficient in CAD software, capable of independently producing detailed drawings., • Meticulous attention to detail and a strong sense of responsibility. Excellent communication skills and a collaborative team spirit., • Mandarin speaking abilities are a strong plus, but not mandatory

Job Description About Range Energy Range Energy builds powered trailers that help electrify heavy-duty trucking without requiring fleets to replace their tractors. We solve real-world problems with real hardware. We move fast, take ownership, and hold a high bar for execution. We value people who are low ego and team-first, calm under pressure, direct and respectful communicators, willing to roll up their sleeves, and focused on solutions, not drama. We operate with high integrity. We do what we say we’ll do, we’re transparent about risks and tradeoffs, and we build trust through consistent follow-through. The work is hands-on. Sometimes messy. Often fast. Always meaningful. Founded in 2021, Range is led by experienced EV operators from Tesla, Zoox, Honda, and other leading OEMs. We are backed by strong investors and focused on building hardware that fleets will actually use. If you like building real things, solving hard problems, and working with low drama, high output teammates, you will fit here. Role Summary We're looking for a Mechanical Engineer with high drive, low ego, and a genuine desire to own hard problems across our trailer platform. This role sits at the center of our hardware development process — you'll be hands-on with CAE, executing FEA models and validating designs through simulation, while also contributing directly to the physical design and integration of trailer subsystems. The level is open. Whether you're early in your career and ready to build real skills fast, or an experienced engineer looking to take on significant technical ownership with minimal hand-holding, we want to talk. What matters is strong fundamentals, a bias toward execution, and genuine curiosity about how things work. You'll partner closely with systems, electrical, and manufacturing teams to ensure designs are robust, manufacturable, and ready for the road. Key Responsibilities * Develop and execute structural FEA models using CATIA & Ansys to validate trailer subsystems — chassis, suspension, enclosures, and structural interfaces * Build and maintain load cases, boundary conditions, and simulation workflows that support design decisions across the mechanical team * Perform durability, fatigue, and thermal analyses to ensure designs meet real-world operating requirements * Lead or contribute to mechanical design efforts — component design, tolerance analysis, and drawing release — commensurate with experience level * Collaborate with hardware, systems, and manufacturing teams to integrate analysis into the design cycle and drive design-for-manufacturability * Correlate simulation results with physical test data; own root-cause analysis when designs don't perform as expected * Document analysis methods, assumptions, and results to support design reviews and build institutional knowledge What Success Looks Like (first 6–12 months) * Own FEA validation for major subsystems — from load case development through design sign-off * Build repeatable simulation workflows that improve speed and consistency across the mechanical team * Become a trusted resource for analysis-driven design feedback across hardware and systems teams * Ship a meaningful contribution to the organization’s physical design efforts — not just analysis support Required Qualifications * Bachelor's or Master's in Mechanical Engineering, Automotive Engineering, or related field * 2+ years of experience in mechanical design and/or structural analysis (internship and project team experience considered for strong candidates) * Hands-on proficiency with FEA tools, preferably Ansys (Mechanical, Workbench) * Experience with CAD tools (CATIA, NX, or SolidWorks) * Solid understanding of structural mechanics, fatigue, and material behavior * Ability to work independently, manage multiple tasks in parallel, and communicate findings clearly Preferred / Nice-to-Haves * Experience in heavy vehicles, commercial trucks, trailers, or off-highway equipment * Exposure to durability and fatigue analysis methods (stress-life, strain-life, damage accumulation) * Familiarity with thermal analysis or CFD * Experience correlating simulation results with physical test data * Knowledge of ISO, SAE, or FMVSS standards for commercial vehicles * Background in mentoring peers or leading technical efforts on a team Range Energy’s compensation package includes a competitive salary, equity for all full-time roles, and a generous benefits package. The salary range for Mountain View, CA based applicants is between $106,000 - $260,000 annually. The total compensation will be determined based on multiple factors including domain knowledge, experience and location. Range Energy participates in E-Verify in the United States. Range Energy will provide the U.S. Social Security Administration (SSA) and, if necessary, the U.S. Department of Homeland Security (DHS), with information from each new employee's Form I-9 to confirm work authorization. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout the Job FULL-TIME/TEMPORARY (POSSIBILITY FOR PERMANENT) Foxconn Industrial Internet (Fii), is a world leading professional design and manufacturing service provider of communication network equipment, cloud service equipment, precision tools and industrial robots. FII provides customers with intelligent manufacturing services for new forms of electronic equipment products centered on the Industrial Internet platform. As a Test Technician your main responsibility will be to make sure products meet quality standards and function properly. In order to meet quality standards, you will monitor, assemble, improve and manipulate a product to ensure it is in no way defective. You will utilize our equipment and test procedures while testing our products. Collaboration with other Technicians and Engineers is needed to perform regular duties. QUALIFICATIONS: EDUCATION: A.A./Certificate/B.S. in Electrical Engineering, Engineering Technology, or related field EXPERIENCE: Minimum of 5 years of electronic testing, debugging, or tester setup. LANGUAGE: English proficiency required, Mandarin is a plus. SKILLS: • Reading comprehension for schematics and assembly drawing, • Knowledge of volt ohmmeters, digital metes, oscilloscopes, logis analyzers, microcomputers, calipers, and assorted electronic and microcomputer controlled test equipment, • High attention to detail, • Excellent communication skills, • Critical thinking, • Operation monitoring, • Active learning, • Equipment maintenance RESPONSIBILITIES:, • Perform the most problematic tasks associated with the test and debug trouble analysis and/or repair of test fixture for all test station., • Assist Test Engineer in setting up test area and methods., • Work from and interpret basic schematics, logic drawings, test procedures, prints, sketches or verbal instructions., • Write and/or assist Test Engineers in writing new test procedures., • Recommend new methods or changes in test methods or equipment of efficient and economic tester of system, sub-assemblies or modules., • Prepare verbal or written reports of tests and work performed., • Train manufacturing operator or technician how to operate all of the testers on the manufacturing floor. Shift Schedules: Day: 7:00AM - 3:30PM Swing: 3:15PM - 11:45PM Graveyard: 11:30 PM - 8:00AM Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I- 9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR aj7QFOhYRS

Job Description Antora builds and deploys thermal energy storage to power always-on industrial operations and data centers with low-cost energy. Factory-built in California, Antora's thermal batteries deliver reliable and cost-effective heat and power for industrial loads of any size. Antora is electrifying global industry while supporting U.S. manufacturing jobs, lowering costs for energy consumers, and enhancing the competitiveness of American industry. We are growing our company with people who put team and mission first, value connection through laughter and joy, and build with humility and openness. We are committed to continue building a diverse, passionate, and creative team dedicated to a future where every industrial facility, everywhere on earth, is powered by abundant, clean, low-cost energy. Position Summary We are seeking a self-driven and passionate individual to join our engineering and project execution team to deliver zero-carbon industrial heat and power with our novel solid state thermal battery. We are a tight-knit team that loves what we do and we strive to have an impact, working with humility and openness while building lifelong relationships along the way. As a Project Engineer, you will work on the balance-of-plant (BOP) systems for Antora Energy's thermal energy storage projects across test and commercial sites. You will be a key technical member of a cross-functional and rapidly growing organization as we deploy our first commercial scale projects. Roles & Responsibilities • Coordinate engineering resources, internal and external, to design, construct, commission, and troubleshoot the balance-of-plant system., • Ensure project technical documentation (PFD's, P&IDs, SLDs, Cause & Effect, etc) are aligned across Antora engineering and external parties; including change management, RFIs, and final as-built drawings. Work with document control resources to facilitate required engineering reviews prior to documents being issued for construction., • Review discipline design deliverables (Mechanical, Structural, Electrical) to confirm design requirements are met and facilitate successful field implementation., • Review or create construction work plans and submittal packages. Support generation of commissioning plans and hand-over of Inspection Test Plans (ITPs) to the commissioning team. Support engineering in handing over documentation to the plant operations team., • Support the Supply Chain and Procurement teams by writing requests for proposals, reviewing quotes, and evaluating vendor technical capabilities., • Collaborate with the Project Manager on project cost, schedule, and risks. Maintain the project action log and drive resolution of open items., • Support engineering, construction, and commissioning phases of project by having an in-person presence for both ensuring proper coordination between technical resources and quality compliance to engineering design., • Typical travel of 25%Key Qualifications, • Bachelors or equivalent in an engineering field (e.g. civil, construction management, industrial, process, chemical, etc.) and/or 5+ years' experience in industrial project engineering (oil & gas, chemicals, power plants, etc.)., • Have worked for, or with, EPC teams., • Proficient in reading and interpreting construction plans and specifications. (PFD's, P&IDs, SLDs, Cause & Effect, etc), • Experience working independently, as well as working in a team-orientated and fast-paced startup-like environment.Additional Qualifications Desired, • Experience in construction and commissioning of process plants or other industrial facilities., • Proficient in using construction estimating practices, software and tools (ACCE, ICARUS)., • Familiarity with 3D CAD (Solidworks, Navisworks), 2D drawings (AutoCAD)., • Have a PE in a related discipline., • Technical writing: equipment specifications and technical reports., • Vendor and client relations., • Managing contractors. Work Location: Onsite - San Jose, CA Salary Range: $165,000 USD - $180,000 USD Salary Basis: Annual Please note that the salary range listed above reflects Antora Energy's estimated pay for this position. The actual salary offered will be within the posted range and determined based on several factors including but not limited to a candidate's experiences, credentials and expertise, as they pertain to the position's requirements. In addition to a competitive base salary, Antora Energy's Total Rewards program includes equity compensation in the form of stock options, a premium health benefits package with life and disability insurance, a 401K plan with employer contributions, flexible spending accounts, and an industry leading paid-time-off policy that features flexible and inclusive holiday observance, as well as paid volunteer time off. #LI-Onsite When it comes to stopping climate change, we need everyone. We believe that having a diversity of backgrounds and experiences strengthens all of us, and we strive to create an environment where every one of us is empowered to create meaningful change.

Job Description About UsOptopax is a Silicon Valley–based design and OEM manufacturing company delivering integrated AI imaging solutions—from concept through prototyping to production. We specialize in AI-enabled camera modules, precision optics spanning UV to LWIR, and custom embedded imaging systems powering applications in robotics, autonomous vehicles, submersible imaging, biomedical instrumentation, AR/VR, and optical computing. Join our small, global team headquartered in San Jose, CA, and help us engineer the next generation of camera solutions that transform how machines see—through custom optics, advanced sensor integration, and embedded AI vision platforms. About the RoleOptopax is seeking an Intermediate–Senior Business Development Manager with a strong technical foundation in optics and imaging systems to help scale strategic customer programs and long-term partnerships. Reporting to the VP of Sales & Marketing and working closely with executive leadership and engineering, this role offers the opportunity to operate at the center of cutting-edge optical innovation and commercial execution. In this role, you will own the end-to-end business development lifecycle for complex, engineered optical and imaging solutions—shaping opportunities from early technical discovery through contract execution and delivery. You will work directly with customer technical teams, influence system-level trade-offs, and stay actively engaged through program execution to ensure successful outcomes. This position is ideal for a technically fluent seller who enjoys working in fast-moving, growth-oriented organizations, values close collaboration with engineering, and takes pride in building durable customer relationships. As Optopax partners with customers on concept-defining technologies, you will play a key role in translating advanced optical capabilities into meaningful commercial impact. The role is preferred to be in San Jose, CA, with a hybrid work model (2–3 days per week in office to support collaboration and customer engagement), and periodic travel to support key customer interactions. May be open to candidates outside of this geographic area. What success looks like in the first 90 days: • Develop a clear understanding of Optopax’s technology stack, customer value propositions, and competitive positioning., • Build and qualify a pipeline of high-value opportunities in target verticals (e.g., automotive, robotics, defense, and biomedical imaging)., • Lead technical-commercial engagements through the full sales cycle, demonstrating fluency in optical and imaging system concepts., • Advance a lead to contract or prototype phase to contract or prototype phase., • Take the lead as the primary point of contact on at least 1 customer project that is already at contract execution stage. What You’ll Do • Own end-to-end business development for complex optical and imaging programs—from early technical discovery and opportunity qualification through pricing, negotiation, and contract closure, • Lead technical–commercial engagements with customers, engaging directly with engineering teams to shape requirements, evaluate trade-offs, and position Optopax’s solutions effectively, • Serve as the primary customer-facing owner for strategic programs during execution, ensuring alignment with scope, milestones, and delivery expectations, • Partner closely with Optopax engineering leadership to translate customer needs into viable system architectures, prototypes, and production-ready solutions, • Build and grow a pipeline of high-value opportunities across Optopax’s core markets, focusing on long-term partnerships rather than transactional sales, • Drive engineering services and custom system sales, including NRE-based programs and multi-phase development engagements, • Maintain strong, trusted relationships with customer stakeholders across technical, commercial, and executive levels, • Provide ongoing market and customer insight to inform Optopax’s technical roadmap, go-to-market strategy, and investment priorities, • Identify and cultivate strategic partnerships with OEMs, integrators, and ecosystem partners where they support long-term growth, • Represent Optopax professionally in customer meetings, technical reviews, and industry interactionsWhat You’ll Bring Required • Bachelor’s degree in Engineering, Optics, Physics, Electrical Engineering, or related field, • Technical sales or business development experience in optics, imaging, photonics, or camera systems, • Proven ownership of the full sales cycle, from discovery through contract close, • Experience selling engineered products and/or engineering services, including NRE-based programs, • Technical fluency in optical, optomechanical, or optoelectronic systems (e.g., camera modules, lenses, sensors), • Ability to work closely with engineering and serve as a customer–technical bridge, • Experience operating in small organizations or startup environments, • Strong written and verbal communication skills with technical and executive audiences, • Ability to manage multiple opportunities and active programs simultaneously, • Willingness to travel as needed (up to ~25%) Preferred, • Advanced degree in Engineering, Optics, Physics or related field (MBA, MSc, or similar), • Established network in optics, photonics, or AI vision sectors., • Familiarity with ISO standards, quality systems, and regulatory requirements, • Knowledge of optical design methods, optical manufacturing methods, and optical test stations.What We Offer, • Opportunity to work in a fast-paced, innovative environment, • Chance to make significant impact on company growth, • Collaborative and supportive work culture, • Compensation range of $100,000-150,000 USD base + commission opportunities

Job Description About SiTime SiTime is the Precision Timing company. Timing is the heartbeat of all electronics, ensuring performance, resilience and scalability. For decades, quartz devices, non-silicon technology, have kept systems in sync, but they struggle in harsher, more demanding environments. MEMS-based Precision Timing delivers greater accuracy, smaller size and resilience. Today, MEMS timing powers over 400 applications, including high-growth ones in AI datacenters, automated driving, industrial and humanoid robots, wearables and IoT. Our semiconductor MEMS programmable solutions offer a rich feature set that enables customers to differentiate their products with higher performance, smaller size, lower power, and better reliability. With more than 4 billion devices shipped, SiTime is changing the timing industry. For more information, visit: . Job Summary The MEMS Process and Yield Engineer will be responsible for MEMS wafer yield and disposition. They will monitor Foundry and Test data for yield issues and work with MEMS Wafer Foundry and MEMS Test Engineering to ensure high quality MEMS process control. It is not necessary to meet all job requirements to be a qualified candidate for the position. Responsibilities: * • Drive continuous improvement in MEMS process and yield with MEMS Foundry, • Disposition of MEMS product material at Test and Foundry, • Responsible for qualifying process changes and Ramp of new and mature products, • Work with MEMS Foundry to Design and Execute experiments, analyze data, and present results with process change recommendations., • Responsible for Ongoing process control of both MEMS wafer test and foundry process data, • BS, MS, or PhD degree in Chemical, Mechanical, or Electrical Engineering, Physics, Material Science or similar technical degree, • Experience with Statistical analysis and DOE software, such as JMP or Spotfire, • Experience with Statistical Process Control (SPC), yield improvement, Wafer Probe, • A minimum of 10 years experience in semiconductor manufacturing, including Wafer Process and Wafer Defect analysis, • Experience with MEMS process is a plus, • Experience with Wafer Sort is a plus, • Experience with OSAT processes is a plus Desired Characteristics & Attributes: • A positive attitude and motivated to learn new skills., • Strong written and verbal communication skills required, • Good Critical thinking and Organizational skills required, • Ability to work well with others in a collaborative fast-paced team environment At SiTime, we believe great work deserves great rewards. We offer a comprehensive and highly competitive compensation package designed to attract top talent. The annual base salary range for this role is $98,400.00 – $135,300.00. The final offer is determined by factors such as location, experience, education, and training. In addition to base salary, this role is eligible for a quarterly bonus tied to the achievement of innovation goals—reflecting our commitment to recognizing meaningful impact. We also offer equity grants, providing a meaningful opportunity to share in the company’s future growth and success. Benefits offered: 401k plan, health and wellness that includes medical, dental, vision, life, parental leave, legal services, and time off plans. SiTime is an Equal Opportunity Employer. We treat each person fairly and we do not tolerate discrimination or harassment against anyone on the basis of any protected characteristics, including race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, pregnancy, political affiliation, protected veteran status, protected genetic information, or marital status or other characteristics protected by law. SiTime participates in the E-Verify program. Learn More about SiTime: Review the Get to Know SiTime section of our career page to explore our culture, values, and what makes us unique. • Innovation on Top – Philosophies of Innovation with Rajesh Vashist, • Fabrication Knowledge – An Interview with Rajesh Vashist, • SiTime Corporation – YouTube #LI-SITIME

Job Description Amphenol Commercial Products Group is a market leader in high-speed, high-bandwidth electrical connectors supporting strategic markets including Networking, IT Datacom, Automotive, and Electric Vehicle (EV) technologies. Our interconnect solutions enable the electronics revolution and support many of the world's leading Tier-1 OEM customers across these high-growth industries. We are seeking a Field Sales Engineer Intern to join our team in Santa Clara, CA. This internship provides a unique opportunity for students to gain hands-on exposure to the intersection of engineering, sales, product marketing, and customer engagement within the high-speed interconnect industry. Position Summary As a Field Sales Engineer Intern, you will support the Sales and Field Applications Engineering teams in driving customer engagement, learning the technical and commercial aspects of Amphenol products, and assisting with activities that support new design opportunities. This internship offers valuable insight into how engineering and sales collaborate to solve complex challenges related to high-bandwidth signal transmission and customer design requirements. Interns will gain exposure to customer interactions, market analysis, technical product positioning, and sales strategy development. The market segment focus for this role will include Automotive and Electric Vehicle (EV) technologies, supporting customers developing next-generation mobility, electrification platforms, and high-performance computing architectures used in modern vehicles. Key Responsibilities • Assist the Sales and Field Applications Engineering teams with customer engagement activities., • Support the promotion of Amphenol products to existing customers and potential prospects., • Help research and identify opportunities for Amphenol interconnect solutions within Networking, IT, and Datacom applications., • Participate in internal meetings with Product Development, Product Marketing, and Sales teams to understand new product strategies., • Assist with preparation of technical and sales materials, presentations, and product documentation., • Support tracking customer inquiries, sample requests, and product information., • Conduct market and competitor research to help identify trends and opportunities within the territory., • Assist in analyzing customer requirements and identifying potential product applications., • Support the coordination of customer visits, virtual meetings, and follow-up communications., • Gain exposure to the sales process including design-in opportunities and channel management., • Participate in training sessions to develop knowledge of Amphenol products and industry applications., • Currently pursuing a bachelor's degree in electrical engineering, Mechanical Engineering, Business, Marketing, or a related technical discipline., • Junior or Senior standing preferred., • Interest in technical sales, product marketing, or field applications engineering., • Strong analytical and problem-solving skills., • Excellent communication and interpersonal skills., • Ability to work collaboratively in a team environment., • Strong verbal and written communication skills., • Ability to learn and understand technical product concepts., • Organizational and time management skills., • Self-motivated with a strong willingness to learn., • Proficiency with Microsoft Office (Excel, PowerPoint, Word, Outlook)., • Exposure to technical sales within the electronics and interconnect industry., • Hands-on experience working with engineering, marketing, and global sales teams., • Insight into customer design cycles, product strategy, and global account management., • This internship ison-siteat ourSanta Clara, CAlocation., • No relocation or housing packageis offered., • Candidates must beauthorized to work in the United States.

Job DescriptionJob Description Location: We are open to candidates in the U.S. and Canada, Singapore, and China (Hong Kong and Shenzhen) Depending on location and team fit, this role can be remote or hybrid. Client has business presence in the U.S., Singapore, China and can hire with flexibility across these regions. About the job Client is building advanced silicon photonics and heterogeneous photonics technologies for next-generation compute, connectivity, and sensing platforms. We are looking for strong builders who want meaningful technical ownership, broad scope, and the opportunity to help shape a core platform from an early stage. Role Summary Client is hiring a hands-on Silicon Photonics Integrated Circuit Engineer / Tech Lead to lead PIC device design, simulation, layout, tapeout preparation, and validation support for highly integrated photonic ICs. You will work across photonics, electronics, packaging, and test to help deliver manufacturable devices for demanding next-generation systems. This is a high-ownership startup role for someone who wants to move fast under uncertainty, solve hard cross-functional problems, and help build a path from first silicon to advanced high-volume products. Key Responsibilities PIC Design, Integration & Co-Design Design and optimize passive and active PIC building blocks, including waveguides, couplers, MMIs, grating couplers, modulators, detectors, heaters, and related structures. Contribute to subsystem- and chip-level design decisions for dense photonic integration, wavelength-division architectures, and tightly integrated optical I/O functions. Run photonic, thermal, and tolerance/yield simulations and translate results into design rules, margins, and practical engineering tradeoffs. Work closely with electronics teams and external partners on ASIC/PIC co-design, interfaces, packaging constraints, and test access.Layout, Verification & Tapeout Readiness Convert schematics and design intent into DRC-clean layouts using foundry PDKs and disciplined layout practices. Manage layout hierarchy, verification flows, DRC/LVS checks, fill and density rules, and mask readiness. Prepare GDS and tapeout documentation packages, including structures that improve debug, characterization, and revision speed. Silicon Learning, Validation & Productization Define test structures, test plans, and acceptance criteria for first-silicon learning and design iteration. Analyze electro-optic and optical measurement data, support debug, and drive model updates and design improvements. Help build a practical path toward robust, manufacturable, and reliable products, with attention to thermal behavior, yield, and scale. Required Qualifications Master’s or PhD in Electrical Engineering, Physics, Photonics, Optics, or a related field. 5+ years of hands-on integrated silicon photonics PIC development experience. Strong understanding of device physics, PIC design principles, and the tradeoffs between performance, manufacturability, and testability. Proficiency in photonic simulation tools such as Lumerical, RSoft, COMSOL, or equivalent. Experience with PDK-based layout tools such as KLayout, Cadence, IPKISS, or equivalent. Ability to work effectively across photonics, electronics, packaging, and test disciplines. Preferred Qualifications Experience with highly integrated PICs and devices such as MRM/MZM, which are used in high-speed communication, optical I/O, or advanced computing/connectivity systems. Familiarity with heterogeneous integration, including III-V/Si or other active-device integration approaches. Experience related to dense WDM integration, integrated light sources, transceiver-class PICs such as co-packaged optics or pluggable. MPW or production tapeout-to-silicon experience and post-silicon iteration. Exposure to packaging, thermal design, reliability, and the requirements of advanced-volume products. What Success Looks Like (First 90 Days) Understand the target platform requirements, technical risks, and key design tradeoffs. Deliver or materially advance a PIC design package aligned to target specifications. Produce a DRC-clean layout or a clear tapeout-readiness plan with risk tracking. Define a credible test and measurement plan to accelerate learning from silicon. Compensation Competitive salary based on experience, scope, and location. Attractive equity participation with meaningful upside for strong early hires. Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionPlus, also known as PlusAI, is a Physical AI company pioneering AI-based virtual driver software for factory-built autonomous trucks. Headquartered in Silicon Valley with operations in the United States and Europe, Plus was named by Fast Company as one of the World’s Most Innovative Companies. Partners including TRATON GROUP’s Scania, MAN, and International brands, Hyundai Motor Company, Iveco Group, Bosch, and DSV are working with Plus to accelerate the deployment of next-generation autonomous trucks. If you’re ready to make a huge impact and drive the future of autonomy, Plus is looking for talented individuals to join its fast-growing teams. As a Principal Engineer on our Mapping and Localization team, you will design and implement high-fidelity fusion algorithms that combine LiDAR, Radar, Camera, IMU, and GNSS data with HD Maps to achieve centimeter-level accuracy. You will tackle the hardest edge cases—from GPS-denied tunnels to dynamic construction zones—ensuring our vehicles operate safely in complex L4 ODDs (Operational Design Domains).Responsibilities: • Lead the design and evolution of our localization architecture, making critical build-vs-buy decisions and defining long-term technical roadmaps., • Design and implement robust, real-time algorithms for sensor fusion, visual/LiDAR odometry, and global localization using techniques like Factor Graphs, EKF/UKF, and particle filters., • Develop pipelines to generate, maintain, and query High-Definition (HD) maps., • Work on "priors-based" localization and semantic map matching., • Solve the "stale map" problem by designing systems for change detection. You will use fleet data to identify construction zones, lane shifts, or new signage and update the map in near real-time. Maintain and continuously update large-scale LiDAR-based HD maps to support autonomous driving systems., • Optimize code for embedded compute constraints (latency, memory, and power) without sacrificing safety or accuracy., • Provide self diagnosis capability for localization, • Act as a technical mentor to senior and junior engineers, conducting rigorous code reviews and fostering a culture of engineering excellence.Required Skills:, • M.S. or Ph.D. in Robotics, Computer Science, Electrical Engineering, or a related field., • 7+ years of industry experience in robotics, with at least 4 years dedicated to production-level localization or mapping systems., • Expert-level Modern C++ (14/17/20) skills, with a deep understanding of memory management, multi-threading, and real-time systems., • Strong theoretical foundation in probabilistic robotics, including Kalman Filtering (EKF, UKF), nonlinear optimization (Ceres, g2o, GTSAM), and SLAM., • Deep understanding of 3D geometry, linear algebra, and coordinate transformations (quaternions, SE(3))., • Familiarity with Eigen, Ceres, PCL, OpenCV, GTSAMPreferred Skills:, • Experience shipping localization stacks for deployed autonomous vehicles or mobile robots., • Hands-on experience with LOAM, lego-LOAM, ORB-SLAM, or VINS.

Job DescriptionOur Mission:Driving technology always feels old. Not by a little bit. We believe vehicles can be a thousand times smarter, safer, and more connected to the world around us, and our mission is to see it happen. In 2019, we joined forces with Honda as their first startup acquisition, and now we’re expanding our vision into building the future of electric vehicles (BEV) for millions of people around the world. Why Drivemode: Join Drivemode for an exciting startup environment and a vibrant culture that combines impactful work, competitive compensation, and excellent benefits. By becoming a part of our team, you'll contribute to a crucial mission that revolutionizes the way people engage with vehicles, addressing both business needs and the world's environmental challenges. This presents an exceptional opportunity to be at the forefront of innovation and drive Honda's success in the EV market. About the Role:The Software Engineering manager will lead a team of cross-disciplinary mobile engineers to develop a companion app for Honda’s next generation of EVs. We’re using modern technologies including Kotlin Multiplatform, Jetpack Compose, and SwiftUI to develop cutting edge automotive features. We’re looking for someone who has a strong sense of ownership over product features, is enthusiastic about trying new technologies, and does not hesitate to do whatever it takes to get things done - even if outside your usual responsibilities.What you will do: • Support a team of 8-10 direct reports, including coaching, guiding their growth, and taking responsibility for their performance and work quality, • Work closely with UX Design, Quality Assurance, Product, Backend, and TPM teams to plan and perfect delightful features for Honda drivers, • Bridge teams with our parent company, Honda, for smoother operations and communication, • Elevate the performance of the team by establishing clear priorities and streamlining processes around Agile, • Recruit mobile software engineers to scale our teamWhat we are looking for:, • Bachelor's Degree in Computer Science, Computer Engineering, Electrical Engineering, or related field (or equivalent experience), • 4+ years of experience as a Software Engineer, • 1+ years of experience as an Engineering Manager or other management role, having managed teams of 3 or more engineers, • Experience with mobile app development in one or more of these technologies: iOS, Android, and cross-platform technologies, • Experience delivering large projects spanning multiple teams, • Experience in running engineering projects with Agile / Scrum methodologies, • Strong written and verbal communication skills, • Travel about 10% to 20% of the time (Japan, LA, or Columbus)Nice to have:, • IoT, connected experiences, etc., • Android Automotive, • Ultra Wideband (UWB) and/or Bluetooth Low Energy (BLE) experience

Job Description Do you often provide ideas that are outside the box? Do you find yourself re-imagining what is possible and push the envelope to set a new standard? If so, we want you to join our team! As a Solar & Battery Storage Project Developer at Centrica Business Solutions, you will assist in the development of solar and solar and storage projects across North America. The Solar & Battery Storage Project Developer will work closely with business development, management, engineering, project management, and construction staff to identify, assess and structure technical and financial solutions for customers' renewable and energy efficiency needs. The Solar Developer will lead the project through Pre-Construction due diligence to contract. The Solar & Battery Storage Project Developer possesses a strong technical aptitude and the communication and business acumen to translate customer needs into technical guidelines. Open to flexible work schedules working fully remote or hybrid but must be able to travel occasionally. Preferably looking for someone to be near the following locations: • California We promote a FlexFirst approach which empowers our employees to take ownership of their work and maintain a positive work/life balance. Our Solar & Battery Storage Project Developers contribute to the team by: • Creating and managing cashflow models to capture all revenue streams specific to solar and storage projects., • Assisting in management of incentive program enrollment for all projects, track timelines to ensure completion within target deadlines, and submit final documentation to secure program funding., • Coordinating with the project development team and with the financing partner, communicating project updates and milestones achieved, providing transparency, and assisting in document sharing., • Overseeing and/or performing the Helioscope design and budgeting of projects., • Auditing sites as needed for PV solar installation suitability, environmental limitations, structural limitations, etc., • Developing professional quality proposal content for technically complex, multi-site PV solar and battery storage systems (BESS) installations., • Managing 3rd party vendor relationships and Scope of Work/proposals. (i.e. Electrical and Structural partners) ., • Developing proposals, reports and presentations in collaboration with the Solar Analyst., • Networking within the industry. The core components of success are (i.e. must haves): • Bachelor’s degree in mechanical or electrical engineering, Business, or a related field. OR Bachelor’s in Distributed Energy/Generation., • 2+ years of work experience in the solar industry and or Engineering and Operations., • Experience in commercial and industrial Solar projects is required with demonstration of full life cycle project experience from concept to performance. A clear set of completed solar projects that have been screened, audited, designed, installed, interconnected and commissioned with Permission to Operate., • Experience in renewable financial modeling: demonstrated ability to maintain Excel based energy modeling., • Understanding of construction of solar PV and BESS projects., • Helioscope modeling skills (preferred), • Good technical skills relating to Behind the Meter interconnection, inverters, racking, and overall system design for solar PV projects ranging from 100kW to 5MW DC., • Past experience and an up-to-date knowledge of best practices as they relate to solar and storage projects (preferred), • Valid Driver’s License; Travel required with employee’s automobile. Our Team and Culture: We offer a culture filled with collaboration, passion, reliability, trustworthiness and more! We don’t just talk the talk but we actually walk to walk here and can show this through our employee feedback – check it our yourself to see what employees are saying: • High level of employee engagement, • Trust in leadership, • Senior leaders listen and act, • Wellbeing, • Employees feeling valued, • Strong focus in health and safety, • Strategy & direction What we do: Digitalization and climate change mean organizations need to be more energy efficient and resilient to limit their impact on the environment while maintaining control of their energy spend. At Centrica Business Solutions, we deliver integrated energy solutions that balance profitability and sustainability. By bringing together the right combination of technologies and approaches, we help organizations get the most value from their energy and energy infrastructure, helping them solve their energy challenges and harness new opportunities in a changing world. As an Energy Service Company (ESCO), our broad portfolio includes: • Energy Efficiency Solutions, • Solar and Energy Storage, • Electric vehicle and battery storage solutions Our benefits and perks: At Centrica Business Solutions, we ensure you are supported and valued. To help do this, we offer a competitive compensation and benefits package. Some of our benefits & perks include: • Medical/Dental/Vision Insurance, • HSA, with company match, • FSA/DCA, • Paid Time Off, • 401(k), with company match, • Life Insurance, • Accident Insurance, • Employee Wellness Program, • Fitness Reward Program, • Employee Training and Development Opportunities, • Casual attire with professional and fun work environments, • Flexible/hybrid work opportunities, • Fungineering (We Engineer the Fun!) The US base salary range for this full-time position is $110,000-$140,000 + bonus + benefits. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range for your preferred location and expectations during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include bonus, commission, or benefits. Centrica Business Solutions is an Equal Opportunity Employer and as such, does not discriminate in its hiring or employment practices.

Job Description Position: Principal Mechanical Engineer II, Early Research and Development, Req#: ROCGJP00039771 Location: Santa Clara, CA (100% onsite only) Duration: 6+ Months Contract with potential to extend Interview Process: 1. phone 2. In-person Interviews and Presentation (Candidate would need to do a bio presentation of skill sets etc.) A cover letter is required for this application. Please outline your relevant experience and explain why you are interested in this role and our company. We are ideally looking for mechanical engineering candidates from the Life Science/Biotech space having experience with at least 2 areas of expertise: fluidics, pneumatics, electromechanical/automation, thermal. Job Description: A healthier future. It's what drives us to innovate. To continuously advance science and ensure everyone has access to the healthcare they need today and for generations to come. Creating a world where we all have more time with the people we love. We are working to make next-generation sequencing simple and accessible enough for routine use. By accelerating clinical research, streamlining workflows, and expanding assay menus, we are broadening access to genomic data and lowering barriers to adoption. From robust sample isolation and preparation tools to Client sequencing technology and advanced bioinformatics, we are developing differentiated, highly integrated end-to-end solutions for next-generation sequencing, resulting in a sample in, result out workflow. Our Systems Technology Group, a part of the client's Sequencing Solutions, is focused on creating and advancing technologies to significantly enhance DNA sequencing workflows. We are seeking a Principal Mechanical Engineer to lead the mechanical design, development, characterization, and integration of cutting-edge sequencing systems. This is a hands-on role for a multidisciplinary expert focused on solving the core mechanical challenges at the heart of our next-generation platforms. You will be responsible for concepting, designing, building, and testing Client electro-mechanical, pneumatic, thermal, and fluidic solutions that ensure the ultimate performance, reliability, and longevity of our systems. The Principal Mechanical Engineer will play a vital role in driving innovation for our next-generation instrumentation. We are looking for someone who exhibits a high degree of motivation, independence, and resourcefulness to help us develop solutions to Client DNA Sequencing and automation challenges in a fast-paced and collaborative environment. Education and Experience Requirements: • You have a PhD in Mechanical Engineering, Bioengineering, or a related discipline with at least 3 years of relevant industry experience; or a Master's degree in Mechanical Engineering, Bioengineering, or a related discipline with at least 4 years of relevant industry experience; or a Bachelor's degree in Mechanical Engineering, Bioengineering, or a related discipline with at least 7 years+ of relevant industry experience., • You have demonstrated deep, hands-on expertise in the design, development, and testing of complex mechanical, electro-mechanical, and pneumatic systems, preferably for life science or diagnostic instrumentation., • You have demonstrated hands-on expertise in thermal management and the design of precision temperature control systems., • You have experience developing fluidics systems and their interfaces including pumps, valves, tubing, sensors, and material selection., • You possess strong proficiency in 3D CAD software (e.g., SolidWorks) for detailed design and the creation of manufacturing drawings., • You have expertise in designing components for a variety of manufacturing processes (e.g., machining, injection molding, 3D printing)., • You are a creative and resourceful problem-solver, with the ability to troubleshoot complex issues at the interface of hardware, software, and chemistry., • You are proficient with common machine shop tools, as well as test and measurement equipment; proficient with rapid prototyping technology such as 3D printers, laser cutters, CNC mills/lathes, etc, and, • You have a demonstrated level of proficiency with Python, LabVIEW, or similar tools for device control and data acquisition. Preferred: • You have demonstrated the ability to lead technical projects and mentor junior engineers, providing clear guidance and delegating tasks to achieve project goals., • You have experience using simulation tools (CFD, FEA) to guide design decisions., • You have previously worked on the development of next-generation sequencing (NGS) or other genomics instrumentation., • You have experience working in a regulated product development environment, • You have demonstrated strong interpersonal and communication skills with the ability to communicate technical knowledge in a clear and understandable manner, especially to non-experts; you excel at problem-solving skills and the ability to work under ambiguous situations., • You have excellent organizational skills, including the ability to efficiently evaluate, prioritize and handle multiple changing projects and priorities; you complete work in a timely, accurate and thorough manner. Core Responsibilities: • You will lead the end-to-end mechanical design and development of mechanical sub-systems including electro-mechanical, pneumatic, fluidic, and thermal components., • You will collaborate with engineers from other disciplines (electrical, consumables, materials) to define and manage all critical technical interfaces for your module., • You will develop Client mechanisms for automated reagent and flow cell loading, clamping, and sealing, ensuring reliability over repeated use., • You will architect and design thermal control systems, including the specification and integration of heating/cooling elements, sensors, condensation control, and heat management., • You will partner with internal and external simulation experts to guide and validate CFD, thermal, and optical models, using empirical data to refine designs., • You will serve as the primary technical expert for your sub-system during integration, verification, and troubleshooting activities, working directly with the Systems Integration team., • You will lead cross-functional design reviews, driving alignment and resolving technical trade-offs between mechanical design, consumables, materials, and assay requirements., • You will drive the technical execution for sub-systems, manage timelines for your design deliverables, and contribute to the overall project plan., • You will create and maintain all design documentation for your sub-systems, including detailed CAD models, drawings, and specifications., • You will contribute to the technical strategy for the future integrated system, providing data-driven recommendations on architecture and technology choices based on your sub-system's performance., • You will present technical progress, data, and design trade-offs to the broader project team and key stakeholders, clearly articulating the rationale and impact of engineering decisions.#TB_OTH #ZRCompany DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

Job Description The Company Halo Industries has developed technology that replaces an outdated semiconductor material slicing process. Our innovative, laser-based solution not only minimizes waste but also enhances material efficiency, thereby enabling advancements across high-growth markets, including automotive, telecommunications, and power electronics. Founded in 2014 at Stanford University, Halo Industries secured significant funding in 2024, fueling our expansion and the preparation for volume manufacturing. The Opportunity Halo Industries is seeking a Mechanical Engineer who will contribute to the design, testing, integration and deployment of both proprietary and commercial wafer processing equipment. Working with Halo’s product and manufacturing teams, the hired candidate will contribute to the optimization and scaled deployment of Halo’s technology. The primary responsibilities of the position include: ● Design, build, and test high-precision electro-mechanical R&D and production manufacturing equipment and tooling, starting from initial process conceptualization through to production deployment on factory floors ● Drive conceptual and detailed designs, using 3D solid modeling (Solidworks) ● Build prototypes and validate designs ● Release parts, assemblies, drawings and ECO’s needed for product release and product support ● Communicate requirements, timelines and deliverables clearly in written and verbal formats ● Work with fabricators, using DFM principles to achieve robust designs that aren’t unnecessarily complicated ● Work with NPI to provide the resources and documentation needed to deploy Halo’s equipment at scale ● Work with software, electrical, and systems engineers to produce integrated solutions to manufacturing needs ● Conduct root cause analysis of test failures and production issues to improve performance Requirements Basic Qualifications ● Bachelors degree in Mechanical Engineering and 5+ years of professional experience (or M.S. / Doctorate and 3+ years of professional experience) in mechanical design engineering, ● Proficiency in CAD modeling (preferably Solidworks) ● Proficiency in precision machine design ● Hands-on experience designing, assembling, testing, and debugging mechanical and electro-mechanical equipment ● Experience with Structural and Thermal FEA ● Experience in GD&T ● Hands-on fabrication/prototyping experience, such as machining and additive manufacturing Preferred Qualifications ● Minimal Iteration Development (get it right earlier) skills ● Familiarity with precision engineering concepts such as micro positioning, kinematic design, dynamic system analysis, thermal compensation, etc. ● Experience with manufacturing documentation including BOMs and assembly drawings ● Experience in machine design for high precision industries (i.e. semiconductors, imaging, life sciences) ● Expertise in mechatronics/automation design (motor sizing, actuator design, sensor selection, etc.) ● Experience in industrial automation (robotics, transfer mechanisms, control systems) ● Past startup experience and insights/lessons learned on effective scaling from R&D to production Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Paid Time Off (Vacation, Sick & Public Holidays), • Life Insurance (Basic, Voluntary & AD&D), • Family Leave (Maternity, Paternity), • Free Food & Snacks, • Stock Option Plan, • Short Term & Long Term Disability, • Base salary $115,000 - $130,000 Additional Information We are committed to creating an inclusive workplace where all team members feel valued and supported. We welcome applicants from diverse backgrounds, including those from underrepresented communities in STEM. If you meet most of the qualifications and are excited about this opportunity, we encourage you to apply.

Job Description Role Overview The Box Build & Electro-Mechanical Engineer supports the manufacturing of complete electro-mechanical systems by reviewing customer-supplied data, drawings, and specifications; identifying opportunities for improved manufacturability; and ensuring efficient, accurate production execution. This role focuses on the design, development, and integration of mechanical components within electronic assemblies, while also optimizing the assembly process, developing tools and fixtures, and troubleshooting mechanical issues to support smooth production. Key Responsibilities Customer Data & Drawing Review • Review and interpret customer drawings, BOMs, schematics, 3D models, and assembly instructions for PCB and box build assemblies., • Verify mechanical and electrical integration details such as dimensions, component placement, mounting, connector clearance, wire harness routing, and enclosure fit., • Identify potential manufacturability issues (DFM/DFA) and provide constructive feedback to the customer in order to improve production efficiency, reduce costs, and enhance quality., • Collaborate with manufacturing teams to optimize workflows for efficiency, repeatability, and quality., • Develop and implement jigs, fixtures, and assembly aids to ensure consistent builds and reduce production time., • Refine mechanical features—such as mounting mechanisms and enclosure layouts—to improve assembly ease and reliability., • Review, modify, and validate process activities from initial product definition to production release, focusing on efficiency, cost reduction, and quality., • Support production during first-article builds, pilot runs, and engineering change implementations., • Troubleshoot mechanical fit, alignment, and integration issues, implementing corrective actions as needed., • Update processes promptly when changes occur to prevent recurring issues., • Ensure assemblies meet IPC, ISO, and customer-specific quality standards., • Participate in in-process and final inspections to confirm compliance with approved drawings and procedures., • Assist with root cause analysis for mechanical or integration defects., • Education: Bachelor’s degree in Mechanical Engineering, Electro-Mechanical Engineering, or equivalent work experience., • Technical Skills:, • Strong ability to read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Proficiency with CAD viewing tools (SolidWorks, AutoCAD) for reviewing and validating designs., • Knowledge of PCB integration into mechanical systems, electro-mechanical assembly processes, and enclosure/wire harness fabrication., • Familiarity with IPC-610, IPC/WHMA-620, J-STD-001, ISO 9001, and AS9100 standards., • Process Improvement: Proven experience optimizing assembly processes, creating tooling/fixtures, and troubleshooting mechanical integration issues., • Communication: Skilled in conveying technical requirements and manufacturability feedback to customers and production teams., • Organizational Skills: Strong attention to detail with the ability to manage multiple priorities in a fast-paced environment. Pay Range: $100K to $120K Benefits: Vacation Dental Medical 401K

Job Description Position Title: Senior Process Engineer Reports To: General Manager Department Name: Assembly Engineering Location: Silicon Valley Summary: The Senior Process Engineer will perform IC Assembly process development and improvement directly resulting in increased efficiency and quality on the production floor. This will be achieved through process documentation, operator training, and design of experiments Essential Duties & Responsibilities: • Assembly Engineering support for the Customer and Sales Group to review Customer requirements, and determine the correct process and materials to meet those requirements., • Daily interaction directly with customers with regard to technical issues and specification reviews., • Manage and define Assembly Processes relating to specific Products and/or Customers., • Responsible for conducting thorough Design of Experiments on new IC Assembly Processes with the goal of developing processes and enhancing productivity., • Provide DOE, SPC, and yield reporting in a clear and presentable format., • Collect Assembly yield data and perform yield analysis for production equipment and customer products., • Generate detailed reports and specifications documenting all experimental and process findings and procedures., • Assess existing processes and identify areas of improvement and solutions for these systems., • Evaluate and provide recommendations on new equipment that will enhance the current production capabilities., • Conduct root cause analysis and corrective actions related to process failures., • Identify and implement cost, quality, and yield improvements., • Perform or assist with any operations to maintain workflow, meet schedules and meet quality requirements., • Maintain safe work areas, comply with safety procedures, and follow equipment operating rules., • Follow clean room and other environmental precautions and procedures., • Participate in meetings and work groups to facilitate cross functional activities, communicate issues, obtain approvals, resolve problems, and maintain knowledge of new developments, requirements, and policies., • Comply with all quality and ITAR policies, practices, and procedures., • Participate in team efforts to achieve departmental and company goals., • Contribute to building a positive team spirit., • Communicate effectively with all levels of employees., • Protect confidential information by not communicating, disclosing, or using for benefit of 3rd parties., • Maintain the highest degree of honesty and integrity at all times., • Perform other related duties as assigned. JOB REQUIREMENTS INCLUDE (List as required or preferred) Education: Bachelor’s Degree in Engineering, Electrical, Mechanical, Material Science, or related field preferred; Experience: • Advanced understanding of Semiconductor processes., • Hands-on Experience in Semiconductor Back End Process Engineering required., • Hands-on Experience in wafer thinning, dicing, die-attach, flip chip, and wire bonding preferred Knowledge/Skills: • 10 years of Assembly Process Engineering experience, preferred Hands on in Die Attach, Wire Bond or Mold, • Knowledge of basic AutoCAD or Solidworks preferred., • Statistical Process Control, Design of Experiments & FMEA experience are all highly desirable., • Detail-oriented, data entry accuracy, problem solver, good analytical skills, team player, multitask capability, • General computer skills, including Microsoft Office Suite., • Strong written and verbal communication skills. At Micross, our Core Values of integrity, communication, teamwork, quality and execution, self-discipline and accountability are cultivated throughout all levels of the organization. Micross provides a challenging and enjoyable workplace for members and supports the needs of the community. Micross provides competitive benefits including medical, HSA and FSA plans, dental, vision, company paid basic Life Insurance, Employee Assistance Program (EAP), 401k with employer match, paid leave, vacation, holidays, generous tuition assistance, 529 College Savings, Pet insurance, Legal insurance, and a range of well-being programs available. Citizenship: Must be a United States Citizen in order to work on sensitive military and aerospace programs. Page Break SUPERVISORY RESPONSIBILITIES Total Number of Employees Directly Supervising: _ Number of Subordinate Supervisors Reporting to Position: _

Job Description Location: Michigan & Santa Clara About SiTime SiTime Corporation is the precision timing company. Our semiconductor MEMS programmable solutions offer a rich feature set that enables customers to differentiate their products with higher performance, smaller size, lower power and better reliability. With more than 3 billion devices shipped, SiTime is changing the timing industry. For more information, visit . Job Summary • Join the team that is revolutionizing the timing industry with the best silicon Microelectromechanical Systems (MEMS) timing products in the world. As a Principal MEMS Development Engineer, you will use your technical and creative problem-solving skills to push forward MEMS technology and engineer resonators for SiTime’s next-generation timing products. It is not necessary to meet all job requirements to be a qualified candidate for the position. Responsibilities: • Lead definition and execution of challenging technical projects., • Advise management of challenges, impact, recommendations., • Develop new or improved resonators, MEMS technologies and/or products., • Design MEMS devices and characterize their electrical, mechanical, and thermal performance on wafer level and/or device level., • Work with process team to drive continuous improvement in MEMS yields., • Extend and enhance automated infrastructure for MEMS design, measurements, and data analysis., • Design and analyze experiments to understand device physics, materials, and fabrication., • Interface with local and overseas vendors., • Work in cross-functional teams, including circuits, systems, and packaging., • Working/supporting other projects as needed. Qualifications & Requirements: • Ph.D. in ME, EE, Physics, or equivalent, • At least 3 years of industry experience., • Skilled scientist with ability to design, conduct, and analyze experiments., • Excellent problem identification and problem-solving abilities., • Excellent knowledge of mechanics, electrodynamics, thermodynamics., • Knowledge in fundamentals of MEMS devices physics and fabrication., • Experience with finite element simulation tools (COMSOL, ANSYS) and data processing tools (Matlab, Python)., • Excellent interpersonal, organizational, written and verbal communication skills., • Passion for delivering exceptional results. Desired Characteristics & Attributes: • 3 -10 years of industry experience., • Intermediate to advanced knowledge of programing languages, circuits, metrology equipment and methods., • Experience with Statistical analysis and tools such as R or JMP., • Knowledge in MEMS microfabrication. Compensation Range: At SiTime, we believe great work deserves great rewards. We offer a comprehensive and highly competitive compensation package designed to attract top talent. The annual base salary range for this role is $164,800.00 – $226,600.00. The final offer is determined by factors such as location, experience, education, and training. In addition to base salary, this role is eligible for a quarterly bonus tied to the achievement of innovation goals—reflecting our commitment to recognizing meaningful impact. We also offer equity grants, providing a meaningful opportunity to share in the company’s future growth and success. SiTime is an Equal Opportunity Employer. We treat each person fairly and we do not tolerate discrimination or harassment against anyone on the basis of any protected characteristics, including race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, pregnancy, political affiliation, protected veteran status, protected genetic information, or marital status or other characteristics protected by law. SiTime participates in the E-Verify program. Learn More about SiTime: Review the Get to Know SiTime section of our career page to explore our culture, values, and what makes us unique. • Innovation on Top – Philosophies of Innovation with Rajesh Vashist, • Fabrication Knowledge – An Interview with Rajesh Vashist, • SiTime Corporation – YouTube #LI-SITIME

Job DescriptionDescription: About Us Founded in 1988, and headquartered in Milpitas, CA, Stellartech Research Corporation (SRC) is a world leader in the development of innovative devices for both large, established companies and early-stage start-ups in the medical industry. The medical systems we develop, and manufacture typically combine a complex electronic microprocessor-controlled device and a “smart” disposable. They employ cutting edge technology such as highly sophisticated energy delivery modalities, cloud-based wireless communication and advanced imaging capability. Our commitment to a “Multiphysics” approach and the mastery of the scientific principles necessary for design realization has allowed us to achieve medical breakthroughs and pioneer many “firsts” in the industry. These include the first temperature-controlled RF generator for cardiac ablation, the first monopolar capacitive RF tissue remodeling system for cosmetic use, and the first balloon-based system for esophageal ablation. With over 25 years of success, we’re continually developing new ideas to serve specialized markets in the medical industry. Position Summary We are seeking a hands-on Senior Mechanical R&D Engineer to assist with detailed design and development of novel medical devices to create tissue access and deliver therapy in minimally invasive environments. This role emphasizes early-stage R&D, intellectual property (IP) generation and design-around innovation, with a focus on miniature boring, cutting, steering and deployment mechanisms integrated into sterile single-use probes and catheter-based platforms. Stellartech utilizes a ‘multi-physics’ approach to develop therapeutic medical systems, and integrates mechanical, electrical, and software-controlled elements that are optimized for the “clinical user environment”. The candidate will develop sophisticated medical devices from concept to market release. They will create and/or translate medical device product requirements into measurable engineering specifications, will help determine product and major sub-system performance requirements, and perform the development and/or sourcing of these elements. They will assist with all development activities required for clinical product use, including DMR creation, DHF preparation, product verification and validation testing, packaging design and verification, sterilization and biocompatibility validation, as well as assist with certification testing to internationally recognized Standards from ANSI/AAMI, ISO, ASTM, ASME, and the IEC. This is a technical leadership role for an engineer who thinks in mechanisms, materials, assembly methods, failure modes, and patent claims. This position reports to the Vice President, Research and Development and will be a 100% on-site position located in our Milpitas, CA facility. Requirements: Core Responsibilities – Technical Product R&D and IP Development • Create and/or translate customer requirements into measurable product specifications. Consider the application of collateral requirements, e.g., ASME fatigue requirements, IEC 60601 electrical safety requirements, etc., • Design and develop mechanical systems to bore into, traverse, or access dense tissue in minimally invasive procedures with mechanisms that include rotational, axial and torque-transmitting, and deflectable deployment systems for catheter and probe-based devices., • Perform detailed structural and fatigue analysis of the tissue-interacting components, such as boring tips, cutting features, cannula design, and their mechanical interfaces., • Consider performance, risks, manufacturability, materials, surface treatments, coatings, sterilization methods, and biocompatibility appropriate for dense tissue contact and wear., • Develop detailed CAD models, drawings, and specifications suitable for prototyping, manufacturing, assembly and inspection., • Assist with patent landscape reviews, design-around analyses and IP defensibility related to device technologies. Design mechanical systems with claims scope in mind, including alternative embodiments. Drive multi-path concept exploration to avoid single-solution risk and strengthen patent coverage., • Assist with benchtop, cadaver and in vivo testing in appropriate species to assess clinical and mechanical performance, including torque transmission, axial and radial load support, fatigue, wear, and failure-mode characterization., • Collaborate with Quality Engineering, Systems, Electrical and Software Engineering, Legal/IP, Clinical, Regulatory, and manufacturing teams during concept development., • Contribute to risk management activities (DFMEA, Usability and use-related hazards, mechanical failure modes, etc.)., • Support technology transfer to manufacturing, including DFM/DFA, supplier qualification, and first-article inspection., • Bachelor's degree in Mechanical Engineering (Master’s or PhD strongly preferred)., • 12+ years of medical device R&D experience, including early-stage invention work and track record of successful product launches., • Experience with catheter-based or probe-based delivery systems., • Familiarity with dense tissue mechanics, cutting forces, and material interactions., • Experience with rotational torque transmission in flexible or semi-flexible shafts., • Familiarity with regulatory requirements pertinent to medical device development, including US FDA Quality System Regulations, 21 CFR Part 820, Design Controls and Good Manufacturing Practices (GMP’s), international standards such as EN 13485 and ISO 14971, etc., • Advanced proficiency in 3D CAD (SolidWorks)., • Experience with mechanical analysis for stress and fatigue strength, such as that performed using finite element analysis., • Hands on experience with fabrication equipment, including mill, lathe, laser welder, boring, cutting, extrusion, injection molding, adhesive bonding, ultrasonics assembly, etc., • Familiarity with engineering materials used is disposable medical devices., • Familiarity with standard laboratory practices and test equipment, such as multimeters, oscilloscopes, tensile testers, strain gauges, pressure gauges, thermocouples, etc., • Experience supporting IDE, 510(k), or PMA filings and with preparation of regulatory agency documentation to support approvals., • Experience with transfer into manufacturing, including equipment, tooling and fixture design and fabrication, process development, operator training, process validation and manufacturing documentation, including Device Master Records, Manufacturing Procedures, Quality Instructions, and Test Procedures., • Ability to communicate ideas and information clearly and effectively, i.e. good verbal and writing skills. Salary Range: $150,000 - $200,000 The posted range represents the company’s good-faith estimate for base salary for this role at the time of posting. Actual compensation will be determined based on relevant factors such as skills, experience, education, and internal equity. Benefits: We offer a competitive benefits package to our full-time employees, including medical, dental vision, life and disability insurance, and paid time off. In addition, Stellartech offers a 401(k) plan with company match and a stock equity plan.

Job Description We are seeking an experienced DFA (Surface Mount Technology Design for Assembly) Engineer to join Sierra Circuit manufacturing team. In this role, you will work closely with design, process, and manufacturing teams to ensure the seamless assembly of printed circuit boards (PCBs) while optimizing product designs for manufacturability. You will be responsible for driving continuous improvements in SMT assembly processes, resolving technical challenges, and ensuring high-quality, cost-effective production. KEY RESPONSIBILITIES: Function Name • Design for Assembly (ADFAE): Analyze PCB designs and provide feedback to improve manufacturability and efficiency during SMT production. Collaborate with design engineers to optimize component placements, solder joints, and assembly processes., • SMT Process Development: Develop, optimize, and maintain SMT assembly processes, including stencil design, solder paste application, component placement, and reflow soldering, to ensure high-quality output., • Manufacturing Support: Provide technical support and troubleshooting for SMT assembly lines. Collaborate with production teams to identify and resolve issues related to assembly defects, component fit, or solderability., • Continuous Improvement: Lead initiatives for process improvements, yield enhancement, and cycle time reduction in SMT production. Implement best practices and drive Lean Manufacturing principles to improve overall efficiency., • DFM Analysis: Conduct Design for Manufacturability (DFM) analysis on new and existing products, identifying potential design and process risks and offering solutions to minimize production disruptions and improve yields., • Equipment Selection & Maintenance: Recommend SMT equipment upgrades or new purchases to enhance assembly capabilities. Ensure SMT machinery is properly calibrated and maintained., • Develop Manufacturing Process Instructions (MPI’s) & Rework Instructions., • Ensure that all proper documentation and data is available for all assembly jobs., • Work with the Assembly Management Team to completely implement/monitor the Assembly Management System., • Be available as back-up for walk-throughs, site audits, or any other requests from customers and partners., • Quality Assurance: Collaborate with the quality engineering team to define inspection criteria, conduct root cause analysis of assembly defects, and implement corrective actions., • Documentation & Reporting: Maintain detailed documentation of process parameters, technical issues, and solutions. Report findings and recommendations to relevant stakeholders., • Cross-functional Collaboration: Work closely with cross-functional teams, including product design, process engineering, quality assurance, and supply chain to ensure product designs are optimized for manufacturability and meet production requirements., • Work extended hours based on company needs and be available for after-hours emergency calls., • Education: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related field. Equivalent experience will be considered., • Experience: 2 – 5 + years of experience in SMT/DFA engineering in a high-volume manufacturing environment., • Technical Skills:, • Strong understanding of SMT assembly processes including stencil printing, pick-and-place, reflow soldering, and automated optical inspection (AOI)., • Proficiency in Design for Manufacturability (DFM) and DFA principles., • Experience with SMT programming, equipment setup, and troubleshooting., • Familiarity with PCB design tools such as Altium Designer, Cadence Allegro, or similar., • Familiar with schematics, PCB fabrication drawings and electronic components that are mounted on electronic assemblies., • Able to evaluate Gerber files, • Problem-solving: Ability to diagnose and resolve complex assembly and design issues., • Communication: Strong verbal and written communication skills for interfacing with multiple teams., • Certifications: IPC-A-610 or J-STD-001 certifications are preferred., • Excellent written and verbal sales communication skills., • Ability to perform at the highest level in a fast-paced environment., • Excellent oral and written communication skills., • Exceptional multi-tasking, organizational skills, strong attention to detail and accuracy., • Strong interpersonal skills and ability to work with all levels of management, • Self-motivator and a sense of ownership and urgency., • Must be able to maintain confidentiality & professionalism at all times., • Experience with Lean Manufacturing, Six Sigma, or other continuous improvement methodologies. PHYSICAL DEMANDS: The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee must frequently stand, walk, and reach with hands and arms. The ability to lift 20 lbs., open filing cabinets, and bend, stand, or climb on step ladders as necessary. ENVIRONMENT: Clean Manufacturing SMT Environment CA salary range $85K - $120K with Benefits and Perks.

Job Description We are seeking a highly skilled and innovative MEMS Process Engineer to join our team. The ideal candidate will have a strong background in MEMS design, simulation, and process development. As a MEMS Process Engineer, you will be responsible for driving the development of new MEMS devices from concept to production. This is a full-time position that offers an opportunity to work on cutting-edge technologies and shape the future of MEMS. Responsibilities: • Design and develop novel AFM Probes from concept to production, considering performance, manufacturability, and cost., • Collaborate with cross-functional teams to define device specifications and fabrication processes., • Develop and execute test plans to evaluate device performance, reliability, and functionality., • Analyze test data and iteratively refine designs to meet performance targets and customer requirements., • Stay up-to-date with the latest advancements in Scanning Probe Microscopy and incorporate new techniques into device development., • Bachelor's or Master's degree in Electrical Engineering, Mechanical Engineering, or a related field., • At least 2-3 years of experience in MEMS design and development., • Strong understanding of MEMS fabrication processes, including photolithography, etching, deposition, and packaging., • Experience with design verification and characterization techniques for MEMS devices., • Excellent problem-solving and analytical skills, with the ability to troubleshoot complex technical challenges., • Strong communication and presentation skills, with the ability to effectively convey technical concepts to both technical and non-technical audiences.