Trabajos Engineering en Glen Cove, New YorkCrear alertas

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Our mission at iRocket is frequent, affordable access to space. We’re hiring a Launch Engineer to manage end-to-end launch operations, integration, vehicle readiness, and mission execution across sites. The Role • Support vehicle assembly, integration, test (AIT), rollout, countdown, and flight operations., • Develop check-lists, execute vehicle/pad/environment checkouts, manage anomaly response during launch campaigns., • Coordinate with propulsion, avionics, structures, safety, and logistics teams to ensure mission readiness., • Monitor launch-site infrastructure, support logistics, GSE, and range coordination., • Bachelor’s degree in Engineering or related field., • 3+ years of launch operations, systems integration, or mission-execution experience (space or defense sector preferred)., • Strong organizational, communication, and problem-solving skills; comfortable in high-stakes environments., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Responsibilities: Develop and execute advanced temperature control strategies for HVAC systems to ensure optimal comfort, energy efficiency, and system performance. Collaborate closely with project teams, mechanical engineers, and clients to understand project requirements and develop tailored temperature control solutions that align with project goals. Configure, program, and fine-tune Building Management Systems (BMS), Programmable Logic Controllers (PLC), and Direct Digital Controllers (DDC) to implement precise temperature control algorithms. Conduct thorough site assessments to evaluate existing temperature control systems, diagnose issues, and propose upgrades or improvements. Generate detailed schematics, wiring diagrams, and documentation for temperature control system installations, troubleshooting, and ongoing maintenance. Oversee the commissioning process by calibrating sensors, validating control sequences, and performing thorough testing to ensure accurate temperature regulation. Collaborate with installation teams and technicians during the implementation phase to ensure accurate execution of control strategies and equipment integration. Keep current with industry trends, emerging technologies, and best practices in temperature control and building automation. Qualifications: Bachelor’s degree in mechanical engineering, Electrical Engineering, or a related field. Advanced degrees are a plus. Extensive experience in HVAC temperature controls engineering, including a deep understanding of temperature control theory and application. Proficiency in programming languages and platforms used in temperature control systems. Demonstrated ability to design, troubleshoot, and optimize complex temperature control algorithms. In-depth knowledge of HVAC systems and components, including chillers, boilers, air handlers, and various temperature regulation devices. Familiarity with industry standards and codes related to temperature control. Ability and willingness to travel to project sites as required. Company Description* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts. • Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity., • We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion., • Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.* With a $ 250 Million Bonding Line, ACS is a Major Player in Government and Private Construction Contracts.\r\n\r\n* Job Stability to our Team Members is ensured by Dozens of Ongoing Contracts at all times in NYC 5 Boros ,L.I, Ct and the vicinity.\r\n\r\n* We are looking forward to expand our Team to take on challenging assignments as we embark on Major Expansion. \r\n\r\n* Our Associates are our Most Valued and Greatest Corporate Asset.We seek to maximize this Asset by assisting all our Associates ,in every which way, in realizing their Highest Professional Potential.

Job Description Project engineer Full Time / Syosset, NY Commercial Real Estate firm located in Syosset, New York has an immediate need for an experienced Project Engineer The Project Engineer will support project management throughout all phases of construction. This role requires strong technical skills, attention to detail, and the ability to communicate effectively. The Project Engineer will ensure project documentation processes are maintained accurately and efficiently. Key Responsibilities • Assist in day-to-day project coordination and execution within the Construction Department., • Receive, log, and track building permit applications, construction plans, and related documentation., • Maintain digital and physical records of permits, inspections, and plan review files in accordance with departmental procedures., • Review project drawings, specifications, and submittals for accuracy and compliance with requirements., • Track Requests for Information (RFIs), submittals, change orders, and other project documentation., • Assembles materials and forms for distribution as directed., • Prepares routine reports or assists in the preparation of reports by gathering data, tabulating results, and/or preparing simple charts. Maintains records and files., • Participate in project meetings and prepare reports summarizing progress and issues., • Collaborate with General Contractors for closeout documents – as-builts, warrantees, guarantees., • 2–5 years of relevant experience in construction engineering or project management., • Proficiency in construction management software (e.g., Procore, Bluebeam, MS Office Suite, MS Project)., • Understanding of construction drawings, codes, and industry standards., • Excellent organizational, communication, and problem-solving skills., • Ability to work effectively both in the office and on job sites. Company Benefits: Employee contributions and waiting periods may apply: • 401(k), • Medical, • Dental, • Life and Accidental Death Insurance, • Short and Long-Term Disability Insurance, • Flexible Spending Account, • Health Reimbursement Account

Job Description JSG is interested in speaking with Sr. Electrical Engineer with a Professional Engineering (PE) license and experience with AutoCAD. This is a direct hire opportunity with our top client in Syosset, NY. Salary for this role is $160K. Sr. Electrical Engineer Description • Design and develop electrical systems including power distribution, lighting, fire alarm, and low-voltage systems for commercial, industrial, municipal and healthcare facilities., • Conduct site visits, inspections, field surveys to support design and construction phases., • Preparation of construction documents, including drawings, specifications, one-line diagrams and load calculations., • Ensure designs comply with applicable codes and standards., • Coordinate with multidisciplinary teams including architectural, mechanical, plumbing, and other team members., • Review of submittals and RFIs during construction administration, • Serve as Project Engineer and Project Manager on smaller, less complex projects, • Use engineering and design computer software to complete assigned work (i.e. Autodesk Revit MEP & AutoCAD), • Capable of leading a team of engineers and working independently with little guidance. The ideal candidate possesses the below additional experience; • 10+ years of Electrical Design experience, • Proficiency with AutoCAD and/or Revit, • Understanding of NEC, NFPA & IEEE codes and standards, • Experience with sustainable design and LEED-certified projects preferred, • Excellent communication, multi-tasking and an ability to work independently, • Professional Engineering (PE) license required, • Bachelors in Electrical Engineering Required Please apply if you are ready to work ASAP with a fast-growing Construction Company! Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with over 35 years of experience investing in people and companies. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. Company DescriptionOur people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals. Johnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs. We offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.Our people and culture make JSG a great place to work. JSG’s mission is to empower people, help our clients reach their goals, and hire motivated individuals.\r\n\r\nJohnson Service Group, Inc. (JSG) is a North American leader in the staffing and consulting services industry, with 40 years of experience investing in people and companies. We are always looking for great people to join our team—we want to see your success here at JSG! We can be found locally in more than 30 offices throughout the United States and Canada. JSG continues to work diligently to offer our clients and candidates world-class service and diversified offerings to fit their evolving needs.\r\n\r\nWe offer medical, dental, vision, life insurance options, 401(k), weekly pay, and more.\r\n\r\nJohnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description The Senior Controls Engineer is an integral part of Champion’s continued success in applying Process Automation and SCADA solutions. This critical, high-profile role is primarily focused on PLC control and SCADA data visualization; incorporating automation, energy monitoring and optimization system analytics. Responsibilities/Essential Functions: · Programming, configuring and maintaining PLC programs and SCADA objects in SCADA system that control and model field assets · Deploying and configuring SCADA objects to support data acquisition from field assets as they are brought online and changed in the field · Create and enforce project specific standards, augment and enhance solutions, benchmark individual and application performance metrics as well as estimate level of effort for initiatives. · Creation and binding of animated visualizations of system graphics and operator interface screens · Generating custom programming scripts to handle global functions · Create Submittals for projects · Commissioning and startup for instrumentation and controls projects Minimum Requirements: · BS in Engineering, Computer Science, or equivalent experience · Minimum of 10 years of experience with SCADA, PLC, and HMI applications · Field Experience in Starting up and commissioning Water, Waste water I&C projects · Experience with AutoCad · Proficiency reading and understanding electrical control schematics · Solid understanding of control and process logic, various communications protocols (Ethernet/IP, MODbus, TCP/IP), and network communications infrastructure · Experience in Factory Talk, Iconics Genesis, Wonderware, GE Fanuc Intellution/Proficy, Citect, Motorola Moscad /ACE 3600 applications · Experience writing control and ladder logic programming, basic scripts, and uploading programs to PLC. Development of HMI. PLC and HMI programming experience for Industrial Automation a plus · Experience with calibration, startup and commissioning of Industrial Instruments Company DescriptionChampion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.Champion Controls is a leading control systems supplier providing system integration and engineering design services, as well as manufacturing of custom control panels for a variety of markets. We hold Underwriters Laboratory (UL) certifications for the USA and Canada as a manufacturer of industrial control panels, as well as industrial control panels relating to hazardous locations. We employ a staff of talented professional engineers, electrical technicians, and sales people, who can meet your project needs including providing turnkey installations.

Job DescriptionMunicipal Civil Engineer - TOP 50 ENR Civil Engineering Firm This Jobot Job is hosted by: John Erwin Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $110,000 - $140,000 per year A bit about us: Based just outside of Manhattan with 5 offices across the region we are a $50M+ TOP ENR Ranked Civil Engineering Firm! Our core values are centered around our people and our clients. We believe that putting your employees first is not only the right thing to do, but it also gives us the competitive edge to ensure our clients have an excellent experience! Over the years our reputation for providing our people with the very best has caught the eye of some reputable clients who have chosen to use us as their primary firm! Some of these clients include: MTA and many more! If you are an experienced Civil Project Manager, then please apply! Why join us? Do you want to work with some of the nation’s best Clients AND enjoy time at home w/ family? We do too! • Meaningful Work!, • Best in Class Firm!, • Competitive Compensation Package!, • Complete Benefits Package!, • Flexible Work Schedules!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Is your background a fit? Apply if you meet this criterion: BS in Civil Engineering and an active NY P.E. license • 3+ Years of Civil experience Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description Civil Engineer I – Long Island & New York City Location: Long Island & New York City Employment Type: Full-time Salary: $70,000-$90,000 - Commensurate with experience About Us Our firm is a forward-thinking professional services organization with a strong legacy of delivering high-quality, innovative engineering solutions. Our expertise includes civil, structural, transportation, bridge, environmental, landscape architecture, electrical, and mechanical engineering, as well as construction inspection. We are driven by a commitment to excellence, collaboration, and continuous growth—shaping better outcomes for our clients, colleagues, and communities. Position Overview We're looking for a motivated Civil Engineer I to support a wide range of exciting civil design projects. This role offers opportunities to collaborate with experienced engineers and gain hands-on experience in developing plans, specifications, and technical solutions for infrastructure and site development projects. What You'll Do * Perform design calculations and ensure compliance with applicable codes and regulations. * Prepare and review design and construction plans, specifications, cost estimates, and permit applications. * Collaborate with engineers, CADD technicians, and other team members to deliver high-quality results. * Conduct site visits to evaluate project conditions and coordinate with stakeholders. * Draft technical reports, design documentation, and project correspondence. * Participate in client and agency meetings and professional development events. What You'll Bring * Bachelor's degree in Civil Engineering or a related field (required). * 2–4 years of experience in civil design (consulting or professional services preferred). * Engineer in Training (EIT) certification required; PE licensure preferred. * Proficiency in Civil 3D; experience with site layout, grading, and utilities design. * Familiarity with stormwater design software (HydroCAD, HEC-RAS, or SWMM) preferred. * Excellent communication, organization, and multitasking skills. * Ability to travel up to 10% (occasionally on short notice). Why You'll Love Working Here • Competitive base salary and discretionary bonus plan. Comprehensive benefits package, including multiple healthcare plan options, dental coverage, life insurance, short- and long-term disability insurance, and 401(k) with immediate match and vesting. * Paid time off: 15 vacation days, 64 hours of sick time, and 9.5 paid holidays. * Additional perks like Flexible Spending Account (FSA), Employee Assistance Program (EAP), and more. This company is an Equal Opportunity Employer. All qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Senior Project Engineer – Civil (Long Island & New York City) Location: Long Island & New York City Employment Type: Full-time Salary: $115,000-$150,000- Commensurate with experience About Us Our firm is a forward-thinking professional services organization with a strong legacy of delivering high-quality, innovative engineering solutions. Our expertise includes civil, structural, transportation, bridge, environmental, landscape architecture, electrical, and mechanical engineering, as well as construction inspection. We are driven by a commitment to excellence, collaboration, and continuous growth—shaping better outcomes for our clients, colleagues, and communities. Position Overview We're seeking an experienced Senior Project Engineer – Civil to lead site development and utility infrastructure projects from concept to completion. This role combines technical expertise with project management, offering opportunities to mentor junior engineers, coordinate multidisciplinary efforts, and ensure successful project outcomes. What You'll Do * Manage all aspects of civil engineering projects—planning, design, permitting, and construction. * Lead collaboration with clients, consultants, and contractors to meet project goals. * Oversee project schedules, budgets, and resource allocation. * Ensure design compliance with all regulatory standards and best practices. * Review design plans, cost estimates, and technical specifications. * Represent LKB in client meetings and professional association events. What You'll Bring * Bachelor's degree in Civil Engineering or a related field (required). * 10–15 years of civil design experience (consulting or professional services preferred). * Professional Engineer (PE) license required. * Proven success in managing large-scale land development and infrastructure projects. * Strong leadership, organizational, and communication skills. * Proficiency in Civil 3D; familiarity with HydroCAD, HEC-RAS, or SWMM preferred. * Ability to travel up to 10% (occasionally on short notice). Why You'll Love Working Here * Competitive base salary and discretionary bonus plan. * Comprehensive benefits package, including multiple healthcare plan options, dental coverage, life insurance, disability insurance, and 401(k) with immediate match and vesting. * Paid time off: 15 vacation days, 64 hours of sick time, and 9.5 paid holidays. * Additional perks like Flexible Spending Account (FSA), Employee Assistance Program (EAP), and more. This company is an Equal Opportunity Employer committed to diversity and inclusion in the workplace.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description We are looking for a Tier 2 Linux Engineer to join our onsite team in Westbury, Long Island. This full-time, hands-on role is perfect for someone with strong Linux experience who enjoys working in dynamic environments and solving real-world technical problems. Responsibilities: • Provide Tier 2 support for Linux-based systems (primarily Ubuntu, CentOS, RHEL), • Troubleshoot OS, application, and networking issues across production and internal systems, • Manage user accounts, permissions, and system configurations, • Maintain and configure services such as Apache/Nginx, SSH, DNS, DHCP, MySQL/PostgreSQL, • Monitor system performance and security using standard tools (e.g., top, journalctl, fail2ban), • Assist with backup, patching, and scripting for automation, • Collaborate with other engineers and escalate issues as needed Requirements: • 3+ years of hands-on Linux system administration experience, • Proficiency with command line tools, shell scripting (bash), and standard Linux utilities, • Solid understanding of TCP/IP, DNS, routing, and basic firewall rules (iptables or ufw), • Ability to troubleshoot services, logs, and performance issues, • Strong communication and documentation skills, • Must be able to work onsite daily in Westbury, NY, • 4 days (32 hours) per week including evenings and weekends., • Reliable transportation is required Preferred Qualifications: • Experience with automation tools (e.g., Ansible, Puppet, cron scripting), • Familiarity with cloud platforms (AWS, Azure, GCP), • Experience with containers (Docker) or virtualization (KVM, VMware) Full benefits package, including: • $42/Hour + overtime pay, • Medical, dental, and vision insurance, • Retirement plan, • Paid time off and holidays, • Certification reimbursement and professional development, • Contract engagement terms available at a higher rate of pay.

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Location: Port Washington, NY Job Type: Full-Time Comp: $60-65K/Annually Reports To: Associate Director, Managed Services About Agilant Solutions Agilant Solutions is a national technology solutions provider delivering comprehensive IT services across multiple industries. Our Configuration Center plays a vital role in supporting our Managed Services operations — ensuring devices are imaged, configured, and deployed to client environments with precision and consistency. We take pride in maintaining a collaborative and high-performance culture where technical expertise and quality execution come together to deliver exceptional client outcomes. Position Overview The Configuration Engineer / Manager is responsible for overseeing daily configuration and imaging operations within Agilant’s Configuration Center. This role combines hands-on technical expertise with leadership and process management, ensuring that all devices are prepared accurately, securely, and on schedule for deployment. The ideal candidate will have strong experience in system imaging, endpoint deployment, and technical process leadership, as well as the ability to mentor a team, engage directly with clients, and continuously improve configuration workflows. Key Responsibilities Leadership & Operations Management • Lead, mentor, and develop the Configuration Team to ensure consistent performance, accuracy, and adherence to SLAs., • Manage daily workload distribution, scheduling, and task prioritization to meet project timelines., • Conduct regular quality control checks to maintain accuracy and compliance with client standards., • Identify and implement process improvements to drive efficiency and reduce rework. Technical Responsibilities • Design, build, and maintain standard system images for Windows, macOS, and other supported operating systems., • Manage and maintain imaging platforms and tools such as MDT, SCCM, Autopilot, or equivalent solutions., • Collaborate with internal project managers and client stakeholders to define imaging requirements and translate them into repeatable configuration standards., • Ensure proper documentation of all imaging procedures, asset tagging, and kitting workflows., • Act as the technical escalation point for complex configuration or imaging issues., • Maintain inventory accuracy and device accountability throughout staging and deployment. Client Engagement & Communication • Serve as the primary technical point of contact for configuration-related client interactions., • Participate in project kickoff calls and ongoing meetings to align deliverables with client expectations., • Address client feedback promptly and troubleshoot post-deployment configuration issues as needed. Qualifications • 3–5 years of experience in IT configuration, imaging, or systems deployment., • 1–2 years of experience in a leadership or supervisory role within a technical operations or configuration environment., • Proven ability to create and maintain custom system images for Windows 10/11 and macOS., • Hands-on experience with imaging and deployment tools such as SCCM, MDT, Autopilot, or similar., • Familiarity with scripting languages (PowerShell, Batch, Bash) a plus., • Strong understanding of hardware configuration, BIOS settings, and device preparation best practices., • Excellent organizational, communication, and time management skills., • Comfortable engaging directly with clients and explaining technical processes in a professional manner. Preferred Qualifications • Microsoft certifications such as MD-100, MD-101, or equivalent., • Experience working in a high-volume configuration or staging environment., • Knowledge of IT asset management, logistics coordination, and hardware lifecycle processes. Why Join Agilant Solutions? • Career Growth: Access to professional development programs and technical certification support., • Innovative Environment: Work with cutting-edge technologies and enterprise-scale deployments., • Collaborative Culture: Join a supportive team that values technical excellence and shared success., • Comprehensive Benefits: Competitive pay, health insurance, 401(k), paid time off, and more. Summary This position is ideal for a driven and technically skilled professional who thrives on leadership, organization, and hands-on technical work. As the Configuration Engineer / Manager, you’ll play a pivotal role in ensuring that Agilant’s client deployments meet the highest standards of quality and reliability. Company DescriptionAgilant Solutions, Inc. () is an international provider of digital transformation and enterprise managed services. We leverage our extensive industry experience and IT best-practices for a simple reason; to empower our clients to become heroes in responding to competitive and business needs. It is our commitment to make them excel. Agilant provides a complete breadth of distributed IT solutions through our integrated practices.Agilant Solutions, Inc. () is an international provider of digital transformation and enterprise managed services. We leverage our extensive industry experience and IT best-practices for a simple reason; to empower our clients to become heroes in responding to competitive and business needs. It is our commitment to make them excel. Agilant provides a complete breadth of distributed IT solutions through our integrated practices.

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Project Manager – Environmental Engineering Full-Time | Syosset, Long Island, NY Salary Range $90,000 – $150,000, commensurate with experience and qualifications. About the Company A well-established, multi-disciplinary consulting engineering firm is seeking a talented Project Manager to join its Environmental Engineering team. The firm provides engineering and construction management services to municipal and private clients throughout the Tri-State Region, specializing in civil, structural, traffic, environmental, landscape architecture, mechanical and electrical engineering. Typical project types include transportation infrastructure, utility improvements, site development, solid waste management facilities, and environmental monitoring/reporting programs. Position Summary We are looking for an experienced Environmental Engineering Project Manager with a strong background in environmental and/or civil engineering. This individual will manage design projects, permitting processes, and environmental monitoring/reporting tasks. The ideal candidate will also support business development initiatives and have clear potential to grow into a senior leadership role. Key Responsibilities * Lead and manage project teams, schedules, deliverables, and budgets. * Serve as primary client contact, ensuring excellent communication and service. * Support business development activities, including proposal preparation and client presentations. * Oversee and prepare engineering design plans, specifications, and cost estimates. * Develop contract bid packages and funding applications. * Prepare technical reports, environmental permit applications, and related documentation. Qualifications * Bachelor's degree in Environmental, Chemical, or Civil Engineering; Master's in Environmental Engineering is a plus. * 10–15 years of relevant engineering experience. * Active NYS Professional Engineer (PE) license required. * Strong knowledge of New York State regulations, specifications, and codes. * Proficiency with industry-standard software (e.g., Microsoft Office, CAD). * Proven experience in project management, technical writing, and business development is highly preferred.

Job Description Position Description: Seeking a motivated, intelligent and hard-working individual to Develop and maintain quality and regulatory compliance in Genadynes' processes. Individual will ensure compliance with ISO 13485 and MDSAP requirements are maintained. Specific Responsibilities : Ensure the quality and processes are practiced and maintained. Compile documents required for audits. Create and maintain product technical files. Initiate corrective and preventive actions for non-conformities. Maintain/calibrate the accuracy of all testing equipment. Conduct risk assessments of medical devices and processes. Maintaining the effectiveness of quality control system and non-conforming materials control system. Discuss and solve quality problems with vendors. Investigate problems and make improvement on current processes. Develop/design effective test methods. Facilitate software design and development for medical devices. Performance testing and reporting on software, hardware and the compatibility for all accessories. Perform risk assessments for medical devices and accessories. Development and prototyping of new products with existing or new vendors. Abilities: Familiar with FDA CFR 820, ISO 134850, SOPs regulations. Extreme attention to details. Ability to think outside the box with excellent problem solving abilities. Excellent interpersonal, communication, and writing skills. Highly organized. Excellent computational skills. Knowledge of European regulations is a plus. Knowledge of common medical materials (silicone, polyurethane, etc.) Knowledge of electrical circuits and basic programming. Knowledge of C/C++ is a plus. Maintain MDD/MDR EN ISO Experiences: Regulatory compliance. Quality management. Cross functional team management. Quality assurance Requirements: Bachelor degree in mechanical, electrical, material, biomedical engineering or relative field. (Master degree preferred.) Benefits: Medical, Dental, Vision, PTO, 401K, Legal Services, FSA, Life Insurance Salary Range: $68,000 - $72,000/Annual Powered by JazzHR oSPuR7OKHc

Job Description As iRocket advances toward frequent launches, we need a Test Engineer focused on hardware and launch infrastructure to validate subsystems, ground support equipment, integration, and launch-site readiness. The Role • Lead test programs for launch-pad hardware, ground support systems (GSE), avionics integration, and vehicle subsystem checkout., • Develop test plans, write procedures, execute dry-runs, and perform full system validation., • Troubleshoot hardware anomalies, manage data acquisition and reporting, work with cross-functional teams to close issues., • Support launch operations: pre-launch checkouts, integrated systems tests, post-launch data reviews, and lessons learned., • Bachelor’s degree in Engineering (Mechanical, Aerospace, Electrical, or related)., • 2+ years of test engineering experience in aerospace, launch, or hardware integration/test environment., • Experience with instrumentation, data acquisition systems, hardware integration, and test stand operations., • Comfortable working in a fast-paced environment with evolving requirements and launch cadence goals., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Title: Optical Engineer & Color Scientist Location: Port Washington, NY Position Summary: The Optical Engineer will lead end-to-end optical system design, LED Selection and color science development for advanced LED lighting products across downlighting, projection, track, and linear platforms. This role combines deep expertise in photometric analysis, spectral modeling, LED package characterization, optical simulation, and standards compliance. The ideal candidate will be highly skilled in designing optical architectures for COB and discrete LED engines, optimizing beam performance, color quality, efficacy, and ensuring compliance with emerging Dark Sky, WELL standards and other sustainability standards. This position collaborates closely with product management, mechanical engineering, electrical engineering, and manufacturing teams to deliver world-class optical and color-rendering performance. Key Responsibilities: Optical Design & Engineering • Lead the design and development of complete optical systems for COB, discrete LED, and multi-source architectures., • Create optical solutions for downlights, projectors, wall washers, track heads, and linear systems using reflectors, TIR lenses, hybrid optics, mixing chambers, and light guides., • Perform optical simulations and ray-tracing (e.g., LightTools, TracePro, Zemax, SPEOS) to optimize beam quality, output, UGR, and efficiency., • Develop beam distributions including spot, narrow, medium, wide, oval, asymmetric, wall-wash, and custom profiles., • Evaluate and specify secondary optics from global suppliers; interpret intensity distribution, candela plots, IES files, and lens datasheets.LED Selection, Color Science & Photometry, • Conduct in-depth analysis of LED specification and color science including spectral power distribution (SPD), wavelength curves, CCT, CRI/TM-30, Duv, gamut, R9/Rf/Rg, and full binning structures., • Evaluate and compare LED packages from major suppliers (e.g., Cree, Nichia, Citizen, Lumileds, Samsung, Seoul, Luminus, Bridgelux)., • Interpret LED manufacturer data including LM-80, IS, TM-21/TM-28, TM-30, thermal derating, voltage/current curves, and optical efficiency., • Develop color mixing strategies for tunable white and RGB/RGBW systems including chromaticity stability, thermal droop compensation, and spectral optimization., • Optimize color mixing strategies with optical designs for various products., • Support calibration, tolerance analysis, and performance modeling for optical and chromatic uniformity.Standards Compliance & Sustainability, • Ensure optical and color performance meets or exceeds industry standards including:, • LM-80, LM-79, TM-21, TM-30, TM-20, • Zhaga, ANSI, IES, UL/ETL, cUL, CCC, TISI, etc., • WELL Building standards, Dark Sky / IDA compliance, Turtle Friendly applications (uplight control, CCT limits, spectral considerations), • Apply eco-design principles related to efficacy, energy use, material choices, and emerging sustainability requirements.Optical Prototyping, Testing & Validation, • Lead photometric validation, lab testing, and prototype evaluation to verify distribution, color consistency, and system efficacy., • Working with the test team in our China factory, interpret data from goniophotometers, integrating spheres, and spectrometers., • Support thermal-optical trade-off analysis and long-term lumen maintenance modeling.Cross-Functional Collaboration, • Working closely with multiple development teams, Global R&D (primary function), Functional R&D, Modern Forms R&D, Schonbek R&D, to support incoming projects, support and recommendations, evaluations and feedback etc., • Work closely with product managers to convert market/architectural needs into optical requirements., • Partner with mechanical engineers to integrate optics into housings, heatsinks, trims, and glare-control systems., • Provide technical guidance to NPI, quality, and manufacturing teams for LED selection, optics sourcing, and supplier qualification., • Support a multi-year global product roadmap aligned with commercial growth objectives., • Support high-quality product specifications, business cases, and PRDs (Product Requirement Documents)., • Support comprehensive competitive analysis, positioning frameworks, and training deliverables., • Regular performance analysis and competitive comparisons of WAC Products optics & fixture performance vs the market, • Develop new products that meet leading sustainability and material transparency standards, including RED List compliance, DECLARE certification, and WELL Building Standards., • Support and maintain a robust system to track material composition, supplier data, and documentation required for Environmental Product Declarations (EPDs)., • Integrate eco-design principles into the product development process to reduce environmental impact, improve material efficiency, and support circularity., • Support product documentation, transparency data, and sustainability attributes are readily available to meet growing specifier and regulatory requirements., • Drive adoption of sustainability-focused product features that increase market competitiveness and support environmentally driven project specifications. Requirements: Education • Bachelor’s degree in Engineering, Industrial Design, Architecture, Business, or related field required., • Master’s or PHD degree (Optical Engineering, Physics, Color Science, Photonics, or related field) preferred but not required.Technical Expertise, • 5–10+ years of optical engineering experience in the LED lighting industry., • Strong proficiency in optical simulation tools (Zemax, LightTools, TracePro, OpticStudio, etc.)., • Demonstrated experience designing optics for:, • COB LED systems, • Discrete LED arrays / boards, • Downlights, projectors, linear, wall wash, accent lighting, • Deep knowledge of LED color science, SPD analysis, binning, and photometric evaluation., • Strong understanding of optical materials, TIR lenses, reflectors, micro-optics, diffusers, and color-mixing chambers., • Able to read and interpret spectral graphs, candela plots, IES files, LED datasheets, and thermal-electrical curves.Industry & Standards Knowledge, • Familiarity with major LED suppliers and their product ecosystems., • Comprehensive knowledge of LM-80, LM-79, TM-21, TM-30, TM-20, ANSI C78.377, WELL, IDA/“Dark Sky,” and related industry protocols., • Experience with performance modeling of efficacy, CCT/CRI stability, and thermal behavior., • Experience in tunable white, human-centric lighting, UV/IR LEDs, or narrow-band LED design., • Familiarity with goniophotometer software, integrating sphere systems, and hands-on optical prototyping., • Knowledge of environmental product declarations (EPDs), eco-design standards, and green-building frameworks.Professional Skills, • Strong analytical, experimental, and problem-solving abilities., • Excellent communication and documentation skills; able to translate complex optical science for cross-functional teams., • Ability to manage multiple projects, meet deadlines, and support rapid development cycles., • Comfortable working with global teams and vendors.Travel Requirements, • If not located at NY HQ, travel at least 6x per year to HQ for team meetings., • International travel 30–40%, primarily to our factories in China and Thailand., • Additional travel to global trade shows (Lightapalooza, LEDucation, Light & Building), industry conferences (IALD), customer sites, and Company Launch Events. We recognize people as our most valuable asset. Our competitive salary and benefits package includes: paid time off; medical & dental coverage (including family coverage), vision, life, 401(k); tuition assistance; and continuous training and development. For immediate consideration, please apply as directed. Given the high volume of responses, only qualified candidates will be contacted. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all of its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities. Monday through Friday, 8am - 5pm Monday through Friday, 8am - 5pm

Job Description Power-Flo Technologies is committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as a Design Engineer. This is a full-time, on-site role. Primary Functions Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Salary commensurate with experience (Range from $45,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels., • Design and layout of electrical panels using AutoCAD., • Ensure that all panels are being designed and constructed to UL Standards., • Creating Bill of Materials for the sales engineer team., • Create testing procedures for specific projects to be used by shop personnel., • Determine parameters to program variable frequency drives and soft starters., • 3 years+ experience in the design of electrical system preferred, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Some Minor Lifting and Moving of Parts and Equipment We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionDescription This person will be responsible for overseeing the procurement of over 150 custom spun metal components we’ve designed over the years. We work closely with our trusted metal spinning and wood turning partners, and have sourced a network of US-based high-quality suppliers who are keeping their time-honored craft alive here in America! The Procurement Engineer will work closely with the Systems and Design Engineers to ensure part requirements are clearly and successfully communicated to our partners. Data for recommended order quantities and historical usage is all available on the company’s meticulously configured DDMRP (Demand Driven Materials Requirements Planning) system – Intiflow and Netsuite ERP. On top of analyzing data, sending emails and phone calls to partners, quoting parts, and submitting purchase orders – yxou will be a central point of contact for our design, engineering, scheduling, production, and receiving departments for all things related to the parts under your control. Key ResponsibilitiesYour responsibilities include: • Quote and Purchase parts – maintain all required inventory at “preferred stock levels”, • Maintain and improve vendor relationships, • Pursue new vendors, • Collaborate with Design and Engineering to understand part requirements, • Collaborate with Receiving department to assist with the quality control inspection process, • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Strong technical skills to navigate our software-based workflows

Job Description Job Summary: A LaserAway Laser Engineer will be responsible for all the laser maintenance, safety, and team communication that ultimately support all clinic operations. Continuous assessments and improvements allow our team to remain efficient and effective at LaserAway. Compensation: $90,000-$95,000 Annual Salary Overall Responsibilities: • Oversee all laser maintenance within the assigned territory, • Monitor ticket system, communication platforms, and emails for prompt responses, • Support New Store Openings by ensuring all equipment is functional, • Contribute to positive moral environments within clinic operations, • Establish positive co-worker partnerships for operational effectiveness, • Timely ticket responses to ensure operational readiness, • Ability to exceed expectations and aid in improving overall operations, • Exercise critical thinking and prioritize tasks based on business needs, • Contribute to the support system and demeanor for our clinic teams, • Professionally address non-work related topics with the team, • Prepare Weekly Reports to discuss overall equipment status and updates, • Contribute to a high morale and stress-free environment, • Ensure availability during all clinical operating hours, • Communicate any support needed in advance and professionally, • Properly utilize the communication channels with professionalism, • Coordinate with the medical team to assist in additional equipment training, • Maintain company vehicle in good standing and maintenance, • Maintain a minimum of 8 locations and or 100 medical devices, • Self-sufficient and creating a work schedule, • Support new clinics by scheduling time and meeting all equipment deadlines, • Support new clinics by completing all checklist responsibilities, • Excellent prioritization skills with high-priority to low-priority tasks, • Apply attention to detail to all maintenance processes, • Coordinate with 3rd party equipment repairs and facilitate issues/replacement parts and utilize efficient communication, • Absorb and continuously learn all maintenance procedures, • Nomenclature of Parts, • Part functions and interconnections, • Fault isolation of electrical components, • Optic Alignments, • Energy Software Calibrations, • Disassembly and reassembly of sub-components, • Minor wire splicing, harness repair, and soldering, • Schedule and perform routine maintenance on equipment and respond to on-call laser issues, • Ability to reinspect and quality check all individual processes, • Ability to request assistance to avoid negative business impacts, • Ability to invest time into advancing and seeking more knowledge, • Ability to manage stress and multiple issues efficiently, • Timely service call submissions and meeting attendance, • Ability to communicate professionalism and proper etiquette, • Communicate effectively to all teams, including down equipment or estimated times of repair, • Inventory Control- Maintain and account for all parts routinely, • Ability to adjust Preventative Maintenance schedule given other urgent tasks, • Ability to return damaged/repair parts and manage logistics effectively, • Ability to professionally address recommendations to management, • Ability to multitask while maintaining operational readiness, • Availability- Flexible with the on-call schedule and the ability to adjust per the needs of the operation, • Proficient computer skills including the use of email, video conferencing, Google spreadsheets, and ticket management systems, • Team player and supportive while covering for others, • Flexibility to cover out-of-state or out-of-territory remote clinics, • Proficiency with repair tools and techniques, • Excellent time management, organization, and prioritization abilities, • Maintain ongoing communication with the management and clinic team, • Knowledge of Electrical Safety and Theory, • Strong drive to complete tasks timely, • Maintain a clean driving record and valid identification, • Critical Thinking skills, • Punctual and accurate reporting, • Excellent verbal and written communication skills, • Strong analytical and problem-solving skills., • Ability to develop management skills, • Ability to prioritize tasks and delegate them when appropriate, • Preferred Education, bachelor's degree in the following fields, • Biomedical Engineering, • Project Management, • Electrical Engineer, • Any engineering, • Electrician, • HVAC, • Ability to work before, during, and after business hours, including weekends, • Conduct video meetings with a professional appearance, • Ability to organize the company vehicle, tools, and parts inventory, • Ability to maneuver and or climb an 8ft ladder, • Ability to stand for periods exceeding up to 4 hours, • Ability to drive up to 8 hours per day, • Ability to roll and or carry a tool bag to and from each clinic, • Ability to transport equipment up to 250lbs from location to location, • Ability to load and unload equipment in a company vehicle with a ramp inclined at 25 degrees, • Flexible to drive or fly to another territory and or out-of-state clinics, • Support other Laser Engineers during time off, emergencies, or as requested by management, • Ability to travel out of the territory for up to 5 days at a time LaserAway offers a generous pay structure with additional earning potential through performance review. Additional benefits include (but not limited to): • Healthcare benefits, • Dental, Vision, and 401(k), • Paid Time Away (PTA), • Generous employee discounts This job description is not all inclusive. In addition, LaserAway reserves the right to amend this job description at any time. LaserAway is an Equal Opportunity Employer. Employees must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. The Employer retains the right to change or assign other duties to this position.

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job Description Dual Licensed Operating Engineer - Hospital Department: Operation of Plant Status: Full-Time Shift: Night Shift (Tues-Sat, 10:00pm - 6:00am) Compensation: $63 to $64 per hour Position Summary: Are you a skilled and licensed Operating Engineer with expertise in both boiler and air conditioning systems? A leading organization is seeking a dedicated professional to maintain the critical infrastructure that supports its mission. As a Dual Licensed Operating Engineer, you will play a vital role in ensuring the efficient and safe operation of the plant, directly impacting the comfort and well-being of those served. Key Responsibilities: • Compliance and Safety: Install, maintain, inspect, test, and repair systems in strict adherence to regulations from the City of White Plains, State of New York, Westchester County, NYS and County Health Departments, NFPA, The Joint Commission, and other relevant authorities., • Steam Generation Management: Oversee boilers and control the continuous supply of steam for heating, machinery, auxiliary equipment, and processes., • Water Treatment: Perform daily boiler water tests and administer appropriate chemical treatments to maintain optimal levels., • HVAC System Management: Monitor and control all boiler and HVAC equipment using the Building Management System, ensuring optimal performance and efficiency., • Preventive Maintenance and Repair: Inspect, adjust, repair, and lubricate all related steam plant and air conditioning equipment, including DX and centrifugal units., • Cooling Tower Maintenance: Operate and maintain cooling towers, including water treatment., • Routine Maintenance: Change air filters, clean condensing coils, cooling coils, and fan coil units., • Control System Maintenance: Replace or adjust pneumatic and electric controls, motors, and air compressors., • Ventilation System Management: Maintain air dampers, fans, and ventilating systems., • Documentation and Inspections: Perform all required inspections and rounds, maintaining detailed logs of HVAC and boiler unit checks., • General Mechanical Maintenance: Perform other mechanical maintenance work, including machinery and equipment repair, within your skill set., • Team Participation: Attend meetings as required and assist with snow removal efforts. Qualifications: • High School Diploma or equivalent., • Required Licenses:, • NYC High-Pressure Steam License or equivalent (must obtain White Plains First Class License within one year of employment)., • City of White Plains Air Conditioning Refrigeration Operator's License., • City of White Plains First Class Stationary Engineer's License., • Minimum 7 years of hands-on experience in air conditioning refrigeration and high-pressure boiler systems., • Proficiency in welding and pipefitting., • Demonstrated high degree of mechanical aptitude. Join Our Team: If you are a highly skilled and licensed Operating Engineer looking for a challenging and rewarding opportunity, we encourage you to apply. This organization offers a supportive work environment and the chance to contribute to a vital mission.

Help Us Transform the Pharmaceutical Claims Industry InfinityRx is a health-tech startup on a mission to modernize pharmaceutical claims processing through cutting-edge cloud technology. Our flagship product, the InfinityRx Claims Processor™ (ICP), is redefining how claims are adjudicated—delivering faster, smarter, and more reliable outcomes for patients and healthcare stakeholders. We’re looking for a Software Engineer who thrives in fast-moving environments, enjoys building modern applications from end to end, and wants to play a pivotal role in shaping the future of healthcare technology. What You’ll Do: As an Engineer at InfinityRx, you’ll be hands-on in evolving the ICP platform and building new tools in our product ecosystem. Your contributions will directly impact patient access and the efficiency of pharmaceutical workflows. You will: • Build and enhance key components of our transaction processor, web application, and APIs, • Contribute across the full software development lifecycle, from design to testing to deployment, • Monitor and maintain performance of our cloud infrastructure to ensure uptime and scalability, • Collaborate closely with teammates to architect and deliver clean, maintainable, high-performance code, • Own your tasks with autonomy, using strong time management and follow-through What You Bring: We’re looking for a developer with a strong foundation in modern full stack development, cloud deployment, and API design. You should be comfortable navigating both front-end and back-end technologies, and ready to dive into a growing codebase. Required Skills & Experience: • Bachelor’s degree in computer science, engineering, life sciences, or other related discipline, • 5+ years of professional software development, • Proficient in Java, TypeScript, and SQL (PostgreSQL), • Experience with Spring (Boot or Framework) and React, • Comfortable with RESTful API design and consumption, • Skilled with unit and integration testing using frameworks like JUnit and Mocha, • Familiar with using the Linux command line, • Experience in pharma or healthcare technology, • Proficiency in designing database schemas and writing performant queries, • Familiarity with Redis and NoSQL databases (such as MongoDB), • Ability to perform basic data analysis (such as in SQL or Python), • Use of UI frameworks like Tailwind CSS, Bootstrap, or Material UI, • Experience with observability tools like Datadog, • Involvement in system architecture or technical design decisions You’re a Great Fit If You Are: • A problem-solver who enjoys building scalable, high-quality solutions, • A team player with excellent communication skills, • Comfortable in a startup environment where flexibility and initiative are key, • Motivated by real-world impact in healthcare technology What We Offer: • Hybrid Work Schedule: Mix of in-office (New Hyde Park, NY) and remote flexibility, • Salary Range: $120,000-$150,000 Commensurate with experience, • Paid Time Off, • Growth Potential: Room to advance as our team and product suite expand Join InfinityRx and become part of a team that's building transformative healthcare solutions—one line of code at a time.

Project Manager – Environmental Engineering Full-Time | Syosset, Long Island, NY Salary Range $90,000 – $150,000, commensurate with experience and qualifications. About the Company A well-established, multi-disciplinary consulting engineering firm is seeking a talented Project Manager to join its Environmental Engineering team. The firm provides engineering and construction management services to municipal and private clients throughout the Tri-State Region, specializing in civil, structural, traffic, environmental, landscape architecture, mechanical and electrical engineering. Typical project types include transportation infrastructure, utility improvements, site development, solid waste management facilities, and environmental monitoring/reporting programs. Position Summary We are looking for an experienced Environmental Engineering Project Manager with a strong background in environmental and/or civil engineering. This individual will manage design projects, permitting processes, and environmental monitoring/reporting tasks. The ideal candidate will also support business development initiatives and have clear potential to grow into a senior leadership role. Key Responsibilities * Lead and manage project teams, schedules, deliverables, and budgets. * Serve as primary client contact, ensuring excellent communication and service. * Support business development activities, including proposal preparation and client presentations. * Oversee and prepare engineering design plans, specifications, and cost estimates. * Develop contract bid packages and funding applications. * Prepare technical reports, environmental permit applications, and related documentation. Qualifications * Bachelor’s degree in Environmental, Chemical, or Civil Engineering; Master’s in Environmental Engineering is a plus. * 10–15 years of relevant engineering experience. * Active NYS Professional Engineer (PE) license required. * Strong knowledge of New York State regulations, specifications, and codes. * Proficiency with industry-standard software (e.g., Microsoft Office, CAD). * Proven experience in project management, technical writing, and business development is highly preferred.

Senior Associate Civil Engineer US-NY-Mineola Job ID: 2023-2871 Type: Regular Full-Time of Openings: 1 Category: Civil/Structural Engineering The LiRo Group Overview We have an immediate need for a Senior Associate Civil Engineer for our Mineola, Long Island Office. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities • Serve as lead civil engineer for local townships and villages on Long Island in the consultation, review and preparation of site plans, roadway improvements, drainage upgrades, traffic safety, and streetscape efforts., • As the village or township engineer, lead the preparation of design plans, bid books and specifications, oversight of construction inspections, and final closeout of construction., • Attend planning board meetings and serve as a specialty civil engineering consultant (attendance at evening meetings once per week on average)., • Respond to RFPs and prepare letter proposals for new contracts and task orders., • Lead and direct civil engineering design staff as well as field inspectors on ongoing municipal projects., • Quickly respond and travel to local building departments and departments of public work as LiRo’s representative to support local infrastructure projects., • Perform plan reviews for quality assurance, constructability, and conformance to Nassau County, Suffolk County, and NYSDOT standards., • Financial management of projects and resource staffing., • Attendance at industry functions and business development events Qualifications • Bachelor of Science in Civil Engineering, • 10+ years’ experience in Civil Engineering, • NY PE required, • Ability to provide guidance to junior level engineers, • Understanding and application of local code requirements, • Strong written and verbal communication skills, • Ability to multitask and consistently meet deadlines Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $125,000; Maximum: $170,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay. Exact compensation will be determined on the individual candidate’s qualifications and location., • The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. #ID22 #ZR22 PI628bca1a3895-37820-33502547