Trabajos Engineering en Central Islip, NYCrear alertas

Job DescriptionNarda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel in this position. Management retains the discretion to add or change the duties at any time. The Sr. Specialist, Quality Engineering is a critical role in our organization, responsible for supporting Narda-MITEQ’s Quality Management System (QMS), driving improvements, and maintaining compliance throughout the organization. As an AS9100 accredited organization, Quality has extensive visibility and prominence at Narda-MITEQ. The successful candidate must be self-motivated, detail oriented, a team player, and capable of working closely with Production, Quality, Sales, Customer Service, and Engineering in meeting Narda-MITEQ’s customer commitments. Essential Functions: • Work with the Sales, Engineering, Finance, Inspection, Operations, Manufacturing Engineering and Supply Chain to address issues daily., • Be data driven to assess processes, take measurements, and interpret data to facilitate continuous improvement in manufacturing operations., • Report to the Quality Manager on Quality issues, metrics, and/or trends to support Management Reviews and improvement initiatives., • Have strong problem-solving skills and utilize Fishbone and 5-Why analyses., • Identify RCCA for nonconformances and customer complaints., • Investigates the cause for discrepancies and nonconformities to develop disposition and recommend corrective action plans., • Execute assigned Failure Reports, CARs, SCARs and Customer Complaints, leveraging help from other functions. Drive root cause analysis to ensure permanent fixes., • Coordinates Material Review Board (MRB)., • Serves as guide for external third-party audits, complete FAI reports and support customer source inspection as needed., • Serve as the primary interface to customers and suppliers for quality related matters., • Evaluate and make recommendations on critical supplier selections and drives supplier continuous improvement processes, including leading on-site audits, evaluating prototypes, and reviewing and approving of supplier corrective actions., • Answer questions and provide direction to employees and quality inspectors on quality related topics., • Executes AS9100 Compliance Activities (Internal and External Audits, Training)., • Conducts internal audits and work cross functionally to resolve any findings through Corrective Actions., • Create and document Quality Management System processes., • Familiar with dimensional measuring equipment (OGP, handheld measuring devices, etc.), • Bachelor's degree in engineering and a minimum of 6 years of prior relevant experience Graduate Degree and a minimum of 4 years of prior related experience., • Previous experience working in an AS9100 environment., • Working knowledge of microelectronics products., • Working knowledge of mechanical blueprints & tolerances., • Ability to interface with and effectively communicate with a broad range of customers, cross-functional teams and executive management., • Have professional communication and presence., • Technical expertise in aerospace engineering principles, attention to detail, and excellent problem-solving skills are essential for this role., • Experience building and sustaining an AS9100 Quality Management System., • Previous experience performing AS9102 First Article Inspections., • Working knowledge with industry standards including Mil-Std-883, IPC-A-610 and J-STD-001., • Experience interpreting customer contract flow downs., • Lean Six Sigma experience. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description Olgoonik is an Equal Opportunity Employer Overview: FPM Group, a well-established multi-discipline engineering, architecture, and environmental services firm, has been a trusted provider of innovative solutions since the 1960s. Our diverse project portfolio includes building renovations, MEPF systems, public works, infrastructure development, and environmental compliance. We are seeking an experienced Senior Project Engineer to join our team at our Bohemia and Oneida locations. As a Senior Project Engineer, you will serve as lead designer and project manager, overseeing the design, implementation, and administration of complex mechanical, HVAC, plumbing, and fire protection systems for major new construction, renovations, and system upgrades. You will provide strategic guidance, mentor junior staff, and ensure project success for clients across government, industrial, and commercial sectors. Primary Responsibilities: • Lead the design and development of high-performance HVAC, mechanical, plumbing, and fire protection systems, including sustainable and renewable energy solutions, across all project phases., • Conduct field inspections and system assessments., • Develop and approve detailed engineering drawings, schematics, and technical specifications, ensuring compliance with applicable codes, standards, and client requirements., • Collaborate with stakeholders and other team members to define and refine project scope, objectives, budgets, and schedules., • Oversee the resolution of complex technical challenges during project execution, offering innovative and timely solutions., • Provide construction administration services, including reviewing submittals, shop drawings, RFI responses, and contractor coordination., • Serve as a primary client contact, maintaining strong relationships through regular project updates, addressing concerns, and ensuring satisfaction., • Lead project risk assessments, resource allocation, and quality assurance activities., • Mentor and provide technical leadership to junior engineers and design staff., • 8+ years of mechanical engineering experience, with extensive experience in building systems design for government, industrial, and commercial facilities., • Proven expertise in MEPF engineering, including conceptual design, HVAC load calculations, air handling units, boiler systems, and digital control systems., • Experience managing large, multi-disciplinary projects from conception to completion., • Experience with construction administration, including punch lists, contractor coordination, and permitting., • Strong proficiency with AutoCAD and project management software (e.g., BlueBeam, ProCore, Submittal Exchange)., • Exceptional problem-solving skills and the ability to lead technical decision-making., • Excellent communication and stakeholder management skills, with the ability to manage competing priorities across multiple projects., • NYS Professional Engineer Registration is preferred., • EIT/FE exam passage required The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: Primarily office-based with travel to project sites for field inspections and client meetings as needed. While performing the duties of this job, the employee is required to be able to stand; walk; sit; use hands to handle tools and controls; operate vehicles and equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; see, talk, hear. Compensation: Salary range: $120,000 to $160,000, depending on experience, expertise, and market alignment. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Job Description Power Device Corporation (PDC) is a world leader in the design and manufacture of high-reliability Power and Control solutions (Components to Space Qualified SBCS and Radiation Hardened Components; Power Distribution, Control, and Conversion; Motor Control and Motion Feedback) for aerospace, defense, space, and industrial applications. PDC has served these industries as a trusted resource for more than 50 years…providing proven solutions that are optimized for efficiency, reliability, and performance. Power Device Corporation is headquartered in Bohemia, NY and has manufacturing operations in New York, California, and the United Kingdom. To continue to meet our customer’s mission critical needs, PDC is seeking a Test Engineer to join our respected and valued team. This role is 100% onsite in our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a department of state or commercial license. The salary range for this role is $80,000-$100,000. Job Description - Test Engineer This person will be responsible for maintaining, repairing, upgrading and troubleshooting production test equipment ranging from small manual fixtures up to large automated test stands. This equipment is used to test a myriad of products including small components up to large LRUs. This role reports into the Sustaining Test Engineering Manager and falls under the Operations organizational chart. Responsibilities / Experience Required: • Experience using lab equipment such as oscilloscopes, DVMs and AC/DC power supplies, • Ability to read and understand electronic schematics, • Capable of drawing schematics in Cadence OrCAD, • Good problem solving skills, • Report and respond to test equipment failures in a timely matter, • Experience maintaining test documentation / procedures, • Experience installing / updating test hardware and software, • Experience with CAN, I2C, GPIB, RS485 and RS232 communications, • Experience reading and writing test code using Visual basic, C++ and C#, • Strong skill set in Microsoft Office (Word, Excel, PowerPoint, Outlook), • Working knowledge of Microsoft Access, • Able to perform all duties listed above with minimal supervision or technical guidance, • Must be self-motivated, conscientious, reliable and responsible, • Must exhibit good decision-making skills, • A minimum 2 year degree in Engineering Technology with an Electronics focus, • 4-yr degree in Electrical / Computer Engineering is preferred, • At least 2 years of related work experience that includes the following:, • fabricating prototype circuits from schematics, • testing and troubleshooting complex test stations, • basic AC, DC and semiconductor circuit theory, • utilizing lab equipment such as oscilloscopes, DMM and AC/DC power supplies Benefits of working at PDC • People–Focused Policies, • Career Development, • Medical/Dental/Vision Coverage, • Generous Paid Time Off, • 401k with Employer Match, • Tuition Reimbursement, • Employee Referral Program, • Childcare Subsidy Program, • Fitness Center Reimbursement Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Our client, a leading civil engineering advisory firm and construction management firm, is in search of a Civil Engineer. They are multi-disciplinary, focus on municpal planning, surety work and related verticals. Our clients principals and staff have been recognized by organizations such as the American Institute of Architects, the New York Society of Professional Engineers, the American Bar Association, The Touro Law Center Land Use and Sustainable Development Law Institute and other prominent organizations for their contributions to their respective professions. Location: Based in Hauppauge, NY and willing to travel 10-12 times per year. What you bring to the table: P.E. Certification Experience inc commercial construction Willing to manage projects through completion Able to opine and even testify as an expert on engineering issues What you will do Manage projects Work on design, civil engineering, all things related Focus on state, local government projects Salary range: $110-130K per year plus benefits. EEOE

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking a Process Engineer - Intern to join our respected and valued team. This position is 100% onsite in our Bohemia, NY corporate headquarters. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Responsibilities: • Process Engineer to support CCA manufacturing., • Knowledge of CCA assembly, machine automation, AOI inspection, problem solving skills and Root Cause Correction Action., • Ability to maintain schedules., • Work in a team environment, • Cross train, • Seeking a B.S in Engineering discipline or A.S This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Chief Digital Engineer is a key position that reports to executive leadership and is responsible for developing and executing the company’s digital engineering vision in alignment with corporate strategy and program needs. Leads the adoption of model-based systems engineering, digital twins, and advanced simulation tools to drive innovation, improve system integration, and enhance program execution across all phases of development. Requires experience in hypersonic system development and test & evaluation. Responsibilities: Digital Strategy & Innovation: Develop and implement a comprehensive digital strategy aligned with business goals, driving innovation and growth through technology. Drive the adoption of emerging technologies and innovative engineering methodologies to enhance product development, improve operational efficiency, and create competitive advantages. Technology Leadership: Oversee the development and implementation of digital solutions, including software, platforms, and infrastructure. Supporting complex engineering and program requirements with a focus on high-speed and hypersonic systems for ground and flight testing. Ensure these solutions meet complex technical and programmatic requirements while adhering to industry standards and best engineering practices. Collaborate closely with multidisciplinary engineering teams to align technology strategies with project goals, driving innovation, reliability, and scalability. Team Management: Provide leadership, mentorship, and strategic direction to multidisciplinary engineering teams. Foster a collaborative and inclusive work environment that encourages innovation, accountability, and professional growth. Promote best practices in agile development, systems engineering, and quality assurance to ensure the consistent delivery of high-quality software and technical solutions. Champion continuous improvement through regular feedback, training opportunities, and performance development initiatives to maximize team effectiveness and align with organizational goals. Technical Expertise: Spearhead strategic initiatives to identify, develop, and integrate emerging technologies that enhance future capabilities and offerings with a focus on hypersonic and high speed systems. Provide technical leadership and guidance on architecture, design, and implementation of digital solutions, ensuring they are scalable, reliable, and secure. Cross-functional Collaboration: Partner with Division and Functional leadership to ensure alignment and seamless integration of digital initiatives. Performance Monitoring & Optimization: Track and analyze digital performance metrics, providing insights and recommendations for improvement. Preferred Education / Experience: • Advanced degree in Aerospace Engineering or a related discipline, • Minimum 20 years of relevant experience in product engineering and planning., • Deep understanding of engineering principles, including mechanical, electromechanical, and aeronautical systems design, test, and evaluation with a emphasis on hypersonics., • Proficiency in interpreting engineering plans, technical drawings, and specifications., • Ability to define complex problems, analyze data, interpret abstract concepts, and develop effective solutions., • Strong knowledge of digital engineering tools and technologies, including model-based systems engineering (MBSE), computational fluid dynamics (CFD), AI/ML, IoT, DevOps, and cloud-based platforms., • Demonstrated success leading high-performing engineering teams and driving digital transformation initiatives., • Skilled in project management, prioritization, budgeting, and delivering results on time., • Familiarity with Department of Defense (DoD) acquisition processes, R&D funding, and technology development programs., • Excellent written and verbal communication skills, with the ability to tailor messaging to technical and non-technical audiences., • Proficient in Microsoft Office and engineering-related software tools., • Experience with high-speed/hypersonic aerospace test systems and/or vehicle development programs., • Background in early-stage R&D, product development methodologies, and innovation strategy., • Previous involvement in business integration efforts such as planning, analysis, or M&A activities.

Job Description Join North Wind Systems – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineering Analyst will conduct analysis on designs of R&D prototype components and assemblies. Responsibilities: • Performs thermal and structural analysis of product components and assemblies using finite element or hand calculation methods., • Lead a small team of analysts, providing mentorship, reviewing output of team members, and driving analysis tasks to closure. Manages analysis related budgets and schedules and tracks team performance accordingly., • Reviews customer specifications and internal methods to plan analysis activities, determine loading conditions and develop appropriate acceptance criteria., • Supports customer interface meetings and design reviews by presenting analysis plans, status and results as required., • Bachelor’s degree in engineering discipline with 10+ years of related experience, or a combination of education and experience equivalent to above., • Candidate should have excellent communication skills and enjoy working in a fast-paced work environment., • Must be a self-starter, able to work on multiple projects, and prioritize workload., • General familiarity with aerospace research and development test products such as wind tunnel models, test engines and prototype devices; and analysis of these in the subsonic, transonic and hypersonic realms., • Working knowledge of computer-aided modeling codes (NX or SOLIDWORKS preferred), • Expert knowledge of Finite Element Analysis techniques and codes (ANSYS preferred), • Expert knowledge of steady state, transient, modal, buckliing, harmonic response, and random vibration analysis. Also familiar with the modeling of nonlinearities such as contact, material plasticity, large deflections, etc., • Expert ability for performing textbook hand calculations for axial/bending/torsional stress, beam deflection, and free body diagrams, and 1D fluid flow., • Familiarity with Computation Fluid Dynamics work such that you can supervise CFD team members while not necessarily performing the work., • Familiarity with ASME Section VIII pressure vessel design and calculations., • Working knowledge of Mechanics of Materials for the purposes of obtaining material strength and fatigue limits for a wide range of materials including metals, composites, castings, weldments and 3D printed parts., • Working knowledge of stress-based and strain-based fatigue. North Wind is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. North Wind supports safe and drug free workplace through pre-employment background checks and drug testing. The salary range provided is a general guideline. Actual pay will depend on several factors, including, but not limited to, education, experience, training, and other applicable qualifications. North Wind is committed to pay transparency in compliance with applicable state and local laws. All candidates must be eligible to work in the United States.

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro

Job Description About Grass Valley With our award-winning technology and trusted expertise, Grass Valley enables and empowers creators, broadcasters and media organizations to produce brilliant content that captivates audiences and connects people through the magic of media. As the industry’s R&D powerhouse, we offer the widest and deepest range of best-in-class solutions in the industry. We are the trusted partner to many of the biggest and most creative names in the media and entertainment business as we help our customers to build successful media businesses and navigate the rapidly shifting mediascape. Our people are creative, knowledgeable, passionate and dedicated, working together to deliver high quality solutions and services to customers all over the world. We are looking for our future ambassadors, technologists, thought leaders and innovators to continue this beautiful journey with us. This is your opportunity, join us! For further information, please visit The Role: Grass Valley is looking for an experienced Broadcast Media Engineer to work embedded in one of our major global broadcast customers. This role plays a key part in designing media supply chain and Media Asset Management (MAM) architectures, developing broadcast media workflows, and implementing software tools to ensure media assets are efficiently ingested, processed, stored, retrieved, archived, and delivered. All workflows must meet strict standards for security, scalability, and compliance with media management and information security policies. The engineer will collaborate closely with production, post-production, and content operations teams to design and configure systems that manage large volumes of video, audio, image, and metadata assets for linear playout. The main responsibilities: System Architecture and Workflow Design: • Lead and support cloud migration efforts, including workflow refactoring and validation for both hybrid and multi-cloud environments., • Collaborate with Operations teams to design and adapt architecture and workflows to meet evolving business needs including migration to cloud-based playout platforms., • Implement, test and deliver workflows that facilitate the ingest of media assets and graphics from production teams and external vendors., • Install and configure third-party software applications to enable integrated workflows across interconnected systems.Metadata & MAM Management:, • Identify business requirements for Media Asset Management architecture, database structure, and metadata management., • Develop and enforce metadata taxonomy and tagging standards. Manage database design including appropriate metadata tags to ensure discoverability and contextual accuracy., • Create requirements documents and Change Requests for modifications to third-party MAM tools and software to meet evolving business requirements, • Maintain detailed system documentation and support materials to enable Tech Support teams to own the ongoing maintenance of related systems., • Partner with Systems Integration teams to design, test, and deploy loosely coupled, API-driven workflows for media registration, playlist translation, and as-run reconciliation workflows.Content Delivery and Storage:, • Collaborate with Media Supply Chain team to implement file delivery tools for broadcast and streaming assets, • Collaborate with Operations teams and Infrastructure teams to design and automate the monitoring and management of digital media asset storage systems (on-prem and/or cloud)., • Work closely with Storage Engineering teams to implement media workflows that seamlessly integrate with existing infrastructure and fulfil operational needs.Support, Troubleshooting & Change Control:, • Collaborate with stakeholders and vendors to systematically test, modify, and deploy workflow changes., • Coordinate and execute systemic changes, in collaboration with third party Software and Service providers, to accommodate evolving media delivery and metadata strategies., • Collaborate with Technical Operations teams and Vendors to manage change control process., • Ensure compliance with corporate infosec standards, including adherence to retention policies and access control best practices., • Manage access controls and permissions for various user groups., • Serve as Level 3 engineering resource during troubleshooting, collaborating with IT and Operations to diagnose and resolve system issues and implement updates.Governance, Compliance & Documentation:, • Ensure systems and workflows are compliant with information security requirements, digital rights management best practices, and internal company policy., • Maintain disaster recovery protocols and collaborate with Operations to conduct regular tests to ensure reliability., • Provide training and documentation for internal users. Minimum qualifications:, • Hands-on experience designing, administering and maintaining one or similar platforms (e.g., Aspera, Avid Media Central, CatDV, Dalet, Adobe Frame.io, IPV Curator, Evertz Mediator-X, Vizrt Viz One, Dalet Flex, Grass Valley Stratus, Imagine Communications Nexio-Motion, Ross Video Streamline Xchange, Signiant Media Shuttle etc.), • Strong familiarity with media formats, codecs, and production workflows., • Experience planning and implementing MAM systems and workflows., • Experience with RESTful APIs and integration of disparate systems in a media supply chain., • Proficiency with metadata management and taxonomy best practices., • Knowledge of cloud storage platforms (AWS S3, Google Cloud, Azure, Oracle Cloud), • Familiarity with post-production tools (Adobe Creative Cloud, Final Cut Pro, etc.)., • Knowledge and experience in scripting, automation, data acquisition, measurement, and analysis tools., • Knowledge of content delivery networks (CDNs) and streaming protocols., • Understanding of broadcast, OTT, or streaming platform requirements., • Experience managing large-scale media archives and DAM-to-MAM integrations., • Familiarity with Agile project management tools and techniques such as SCRUM and JIRA., • Demonstrates ability to manage assigned projects to tight timelines., • Demonstrates ability to perform technical analysis, exercise judgment, communicate with clarity and influence key technical decisions., • Possesses understanding of the modern video technology landscape including broadcast and streaming media., • Remains grounded in scientific method and objective analysis, always representing a disciplined engineering approach., • Maintains awareness of the best practices in the broadcast industry and implements forward-looking competitive solutions.We offer, • Competitive compensation package, • Comprehensive benefits including a flexible time off policy Grass Valley is an equal opportunity employer and makes employment decisions without regard to gender, marital status, race, religion, color, age, disability, sexual orientation or protected veteran status. Powered by JazzHR BegnlGiKJ7

Job Description Tempest Engineer Full-Time If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has an opportunity for an experienced Tempest Engineer. You will perform and oversee Tempest test and design programs for external clients. Expertise in the areas of Tempest design, test, interpretation of requirements, evaluation of results, and recommendations to meet all Tempest requirements is required for this position. You will be responsible for providing Tempest expertise to clients and their programs and work independently to satisfy client requirements. Responsibilities include but are not limited to: • Prepare test plans, controlling plans, and prepare test reports, • Perform and oversee and/or direct Tempest tests at DTB and at client facilities., • Perform Tempest equipment and facility certifications, • Provide engineering expertise to clients for design. Additional responsibilities will include: • Support of DTB sales team in finding, developing, bidding and proposals, for new clients and programs., • Prepare and present technical presentations to clients, • Establish and maintain a continuing relationship with clients The ideal Candidate will need: • 4 yr. BSEE degree, • Certified Tempest Professional, Level II, • 5+ yrs. in Tempest test experience, • Experience with Tempest specifications, • Hands-on experience with Tempest test instrumentation, NSTISSAM, NACSEM 5112, AMSG a PLUS, • MUST have a strong understanding of the EMI/EMC Tiles software program, • MUST be able to write the necessary programs to support the department's workload, • Must have knowledge to Quote EMI/EMC test programs, full knowledge of MIL-STD-461 and DO-160, • Strong written and verbal communications skills, • US Citizenship and current US government security clearance is required, • Occasional travel required Dayton T. Brown, Inc. offers: • Competitive salaries, • Tuition Reimbursement at up to 100%, • Medical/Dental/Vision/FSA, • 401k with company match, • Profit Sharing, • Employee activities, • A family-friendly work culture, • Cash incentives and recognition awards Dayton T. Brown, Inc. is an equal opportunity employer- Veterans and Disabled. Job Posted by ApplicantPro

Job Description LHH Recruitment Solutions has an opening for an Account and Sales Manager for our client in the Bohemia, NY area. This direct hire role allows you to expand your account management career within a state-of-the-art technology organization. This on-site position requires a minimum of five-years current experience, a bachelor’s degree in electrical or electro-mechanical engineering as well as experience in conducting technical presentations, trade shows and experience in a OEM environment. Successful candidates will have several years within the aerospace/aeronautics/defense/security fields. Salary range: $75,000.00 - $100,000 plus commission structure RESPONSIBILITIES: • Identify and pursue new business opportunities by conducting market research., • Analyzing market surveys and attend related tradeshows, exhibitions, and conferences., • Generate sales leads, set client appointment, prepare, deliver, and explain quotes, traveling to customer negotiations and closing orders, and assisting with product shipment as needed., • Maintain relationship with OEM customers by making visits and phone calls., • Schedule and conduct technical presentations for current and new customers., • Develop and execute sales plans to achieve objectives – KPIs, revenue, profitability, and market share., • Achieve annual booking plan on a quarterly basis., • Observe and maintain a real time sales forecast, sales database and reporting results., • Collaborate with cross-disciplinary engineering team and operations department., • Able and willing to travel to customer sites or other company locations worldwide (approximately 20%) REQUIREMENTS: • REQUIRED - Bachelor’s Degree in electrical or electro-mechanical discipline., • Experience in a OEM environment., • Willingness to learn and be hands on in a technical environment., • Proven well established verbal and written communication skills., • Highly proficient in Microsoft Office Suite of Tools., • Strong analytical, problem-solving skills and time management., • Ability to operate independently with minimal guidance by management., • Demonstrated proven history of successful sales management and quota achievement., • Willingness and ability to travel domestically and internationally., • Ability to read schematics highly preferred., • Superior proven technical presentation skills. Health insurance, dental insurance, life insurance and several other benefits are offered with this full time direct hire role. Pay Details: $115,000.00 to $120,000.00 per year Search managed by: Laura Orozco Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Regularly work with power output up to 450 kV and up to 6kW, • Work on multiple projects varying in complexity from inception to completion, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise or finalize BOMs, • Create and maintain engineering reports, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service, • Participation in the creation of technical documentation, system manuals and customer facing documentation, • Bachelor’s Degree in Electrical Engineering, • Minimum of 3 years of experience in a manufacturing environment, • Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Knowledge of analog circuit design, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Ability to solve complex technical problems with minimal supervision, • Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters, • Proficient soldering skills, • Proficiency in the English language with established written and verbal communication skills, • Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics, • Proficiency in Outlook, Microsoft Word, Excel and PowerPoint, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Must be legally authorized to work in the US, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • Basic understanding of an ERP system, • Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment, • Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions, • Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required., • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • analyze and solve non-routine and complex problems, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals. This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job Description X-Ray Imaging Applications Engineer Responsible for x-ray inspection and imaging activities according to internal or external customer specifications and ensuring accuracy and clarity of results. Job Description: • Perform and document X-ray imaging studies with a variety of sources, detectors and geometries on sample parts.• Demonstrate system and software capabilities to customers in our lab and at their location.• Analyze and recommend X-ray imaging components including type of source, detector and X-ray technique for a given industrial application.• Troubleshoot imaging related problems for both in-house and field systems, to include providing remote support to existing customers.• Responsible for application and imaging testing on systems in development. • Apply known principles and techniques to examine, inspect and certify images of customer provided materials and complete required documents according to specific procedures and requirements.• Provide training to customers at our location or at their location.• Monitor emerging imaging technology developments and determine applicability.• Conduct experimental investigations with new imaging components and technologies.• Work closely with sales team and upper management • Interact with a cross-disciplinary engineering team (mechanical, electrical, software, imaging) to review, define, and design integrated system solutions to meet requirements of worldwide customers• Acquire necessary certifications by attending relevant courses and passing certification tests.• Develop and maintain best practices and quality processes for entire imaging function• Travel to customer sites worldwide to perform application studies, training, inspections or demonstrations and/or to participate in system installation, repairs or troubleshooting: approximately 30%. Essential Skills: • Bachelor’s degree in computer science or computer engineering. • At least three (3) years of work experience in a technical customer facing role. • Must be a US citizen or permanent resident legally authorized to work in the US and able to obtain unescorted clearance to work at Government sites• Prior usage of MATLAB, C/C++, C# or Visual Basic• Excellent interpersonal skills with the ability to interface effectively with both customers and coworkers of varied disciplines• Proficiency in the English language with established writtenand verbal communication skills • Highly organized and self-motivated capable of successfully working in a fast-paced team-oriented environment.• Must be a creative problem solver with well-developed analytical skills Non-Essential Skills: • Familiarity working with at least two of the following: image quality, image physics, image sensors, cameras, frame-grabbers, computer interfaces or imaging related hardware• Prior experience in quality assurance, controlled design environment. (ISO 9000, NQA-1, or similar)• X-ray imaging system experience • Imaging processing experience Physical and Mental Demands: • Must be able to fulfill essential job function in aconsistent state of alertness and safe manner• Regularly required to sit and stand using computer equipment for prolonged periods of time.• Will be required to sit, stand, walk, bend and work within and around systems in an industrial environment.• May be required to use hands to finger, handle, feel and operate hand tools, power tools, and related standard industrial production and office equipment.• Will be required to lift, move, carry, and/or maneuver materials up to 50 pounds alone; heavier with assistance. • May need to work or traverse upon ladders and/or elevated heights with proper safety gear. • Specific vision abilities required include close vision, distance vision and the ability to adjust focus. • Expected to effectively communicate in person, on phone, and via email and other electronic devices on a continual and repetitive basis.• Domestic and international travel via air, rail, and car. The responsibilities and skills noted within this job description are not all inclusive and are subject to change. This position has been deemed a Safety Sensitive Position. EOE AAP VETS

Job Description Olgoonik is an Equal Opportunity Employer Overview: FPM Group, a multi-disciplined engineering, architecture, and environmental science consulting firm established in 1968, has an exciting opportunity in our Bohemia, NY and Oneida, NY offices. Work closely with clients and project team members in the development of construction documents for institutional and private clientele for a wide array of challenging projects, from the first field visit through the successful completion of construction. Primary Responsibilities: • Responsible for the detailed design of HVAC, plumbing, electrical, and/or low-voltage electrical systems in commercial and institutional buildings, • Perform field inspections of existing buildings to obtain existing condition take-offs needed for design and detailing work, • Work with clients and other project stakeholders to determine and coordinate overall system requirements, • Minimum of 5 years of broad-based design experience as an engineer within a consulting environment, • Bachelor’s Degree in Mechanical Engineering or Electrical Engineering, • Strong AutoCAD skills, • Competency with MS Office Suite programs (Word, Excel, Project, PowerPoint, Teams, etc.), • Experience with online project management platforms such as BlueBeam, ProCore, and SubmittalExchange, • Direct experience in systems installation or with a contractor is a plus The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to be able to occasionally stand; walk; sit; use hands and/or fingers to handle, or feel objects, tools or controls; operate office equipment, reach with hands and arms; climb stairs; balance; stoop; kneel; talk or hear; taste or smell. The employee must occasionally lift and or move up to 25 pounds. Work Environment: General office environment. Olgoonik is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local laws. As an Alaska Native corporation, Olgoonik provides hiring preference to Olgoonik shareholders, descendants, and their spouses to the extent allowed by law.

Job Description LNK International, Inc. is one of the nation's largest manufacturers of solid and liquid dose, over the counter (OTC) pharmaceuticals. For over 40 years, we have built a reputation for delivering the highest quality products, outstanding service and product innovation. What sets LNK apart? We believe it is our employees. There is a commitment to quality in every department at LNK. As a member of our Engineering department, you will be part of a team of dedicated professionals who support and interact with all areas of the company. Our full-time employees enjoy competitive benefits including: • 401(k) with generous employer match, • Health Insurance, • Dental Insurance, • Paid holidays Summary: We are seeking a skilled Packaging Engineer to assess and optimize our packaging processes by evaluating the need for new packaging machines and componentry. This role will be responsible for analyzing current packaging operations, identifying areas for improvement, and recommending cost-effective, efficient, and sustainable solutions. The ideal candidate will have a strong background in packaging materials, automation, and equipment selection, as well as experience in manufacturing or production environments. The following are essential job duties and responsibilities. This list is not exhaustive, and other duties will be assigned as necessary. • Packaging Equipment Evaluation & Selection:, • Assess current packaging processes to determine the need for new machinery or upgrades., • Research and recommend packaging machines that improve efficiency, reduce waste, and enhance product protection., • Conduct cost-benefit analyses for new packaging machinery investments., • Packaging Componentry Analysis & Optimization:, • Identify and recommend packaging materials, containers, and componentry to optimize performance and cost., • Collaborate with suppliers to evaluate and test new packaging materials and technologies., • Ensure compliance with industry regulations, sustainability initiatives, and company standards., • Process Improvement & Implementation:, • Develop strategies to improve packaging efficiency, reduce costs, and enhance product protection., • Work cross-functionally with production, quality, and supply chain teams to implement packaging solutions., • Assist in the installation, training, validation, and troubleshooting of new packaging equipment., • Quality, Compliance & Sustainability:, • Ensure all packaging solutions comply with regulatory requirements and company quality standards., • Evaluate sustainable packaging options to minimize environmental impact., • Maintain documentation for testing, validation, and compliance reporting. Required Knowledge, Skills and Abilities: • Bachelor's degree in Packaging Engineering, Mechanical Engineering, Industrial Engineering, or a related field., • Preferred experience in packaging engineering, equipment evaluation, or related roles, but recent graduates are encouraged to apply., • Knowledge of packaging machinery, automation, and material handling systems., • Experience with packaging materials, including plastics, corrugates, films, and eco-friendly alternatives., • Strong problem-solving skills and ability to work cross-functionally., • Proficiency in CAD software and data analysis., • Candidates with experience in food and beverage, pharmaceuticals or consumer goods., • Understanding of lean manufacturing and Six Sigma principles, • Strong analytical and project management skills with the ability to manage multiple initiatives. Essential Physical/Mental Demands • Ability to sit for an extended period., • Ability to keyboard for an extended period., • Handle material and supplies up to 50 lbs. of weight. LNK provides equal employment opportunities to all applicants and prohibits discrimination of any type on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job Description We are seeking a Quality Engineer to join our team! Responsibilities: • Create and improve automated systems and processes, • Perform first piece inspection, in-process inspection, final inspection, and incoming receiving inspection as required, • Help to Develop Quality Plans for specific jobs as required, • Utilize automated inspection equipment such as Hexagon Global CMM, Keyence Vision System, and Faro Arm to optimize inspection processes., • PC-DMIS programming to improve accuracy and efficiency in Automated quality checks., • Maintain a clean and safe work environment Qualifications: • Previous work experience in quality control., • Familiarity with CAD or other related software, • Strong attention to detail reading blueprints and checking parts to print., • Strong analytical and critical thinking skills, • Excellent written and verbal communication skills, • Knowledge of various inspection equipment such as calipers, micrometers, comparators, etc., • Document all technical procedures and user guides Company DescriptionWe are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.We are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The pay range for this position is between $120,000 and $170,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: This individual will play a pivotal role in driving test engineering and process improvements, optimizing designs, and supporting production operations, directing a team of engineers and technicians. This role requires a combination of leadership, technical expertise, and hands-on experience in test and process engineering within a high-reliability electronics manufacturing environment. Key Position Accountabilities: • Provides technical leadership to address challenges and introduce new capabilities to DDC’s Manufacturing and Test Engineering., • Oversees the design and development of test fixtures and software, ensuring the creation of innovative and reliable test systems., • Lead efforts to research and implement new testing methods, equipment, and techniques to enhance product testing capabilities., • Supervises, mentors, and develops a cross functional team of engineers and technicians, fostering a culture of continuous learning, growth and high performance., • Participates in the development of new products and supports the timely fabrication and testing of designs., • Leads the creation of new processes and procedures, contributing to teams of varied technical disciplines, and ensuring efficient process documentation (SOPs, travelers, etc.)., • Collaborate with design teams to develop innovative approaches that optimize product design trade-offs, including cost, performance, and time to market., • Provides leadership and oversight to day-to-day Process Engineering support across the company (Engineering, Product Development, Test Engineering, Procurement, Manufacturing, and Product Assurance), focusing on improving processes and resolving production issues., • Lead failure analysis investigations of in-house and customer-returned products. Collaborate with other engineering teams to make data-driven recommendations that improve product quality and reduce the likelihood of failures., • Manages the development and execution of project plans, including resource allocation and schedule oversight, ensuring the timely and successful introduction of new processes and test technologies in alignment with company objectives., • Propose and champion the implementation of new methods, capital equipment, technologies, and processes to enhance product performance and operational efficiency., • Participate in technical meetings with standards organizations, ensuring alignment with DDC’s strategic goals., • Coordinate testing, perform failure analysis, and support Applications Engineering in resolving product-related issues at customer sites., • Lead vendor selection for major design projects, considering technical performance, risk, and cost., • Education: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or Applied Sciences required; Graduate degree and previous leadership training is desirable., • Experience: 7+ years of relevant engineering experience, with a focus on test or process engineering and manufacturing support; and 2+ years’ experience as a supervisor, lead engineer or senior engineer., • Technical Skills:, • Knowledge of MIL STDs 883, MIL-PRF 38534, 38510, IPC 610 (desirable)., • Proven expertise in designing, optimizing, and implementing test systems, fixtures, and software., • Strong knowledge of test equipment, failure analysis techniques, and process improvement strategies, • Familiarity with all aspect of Electronics manufacturing including Hybrid and PCB manufacturing., • Leadership Skills: Demonstrated ability to lead teams, mentor engineers, and manage complex engineering projects., • Communication: Strong written and verbal communication skills, with the ability to present technical information to a wide range of audiences., • Additional Skills:, • Knowledge of industry best practices and continuous improvement methodologies. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Design Engineer Bohemia, NY • US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Design Engineer to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturers, automotive and consumer industries worldwide. The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to: • Design custom structural test fixtures that meet customer statement of work requirements, • Create fixture concepts based on requirements, • Develop a design from concept through completion based on discussions with the internal engineering team and end user/customer, • Interfaces with customers and the engineering team to translate design needs, • Participate in and conduct initial and ongoing design reviews, • Select appropriate structural material based on engineering analysis, • Use Autodesk Inventor to create drawings of machined parts, weldments, schematics and top and sub-assemblies, • Create drawings to commercial standards that can be used for fabrication and assembly, • Prepare bills of materials that include fabricated parts, standard hardware, and applicable test instrumentation, • Apply tolerances to ensure parts are produced with the desired fit, • Demonstrate a basic understanding of data acquisition systems and hydraulic/pneumatic control systems., • Familiarity with various fabrication methods, • Prepare fabrication plan and fixture assembly procedures, • Act as the technical contact for the fabricators and assemblers during the production phase of projects, • Supporting quoting efforts for Design/Fabrication as needed, • Collaborate with Project Managers to status ongoing projects, • Provide project engineering support during all aspects of the test program, • Manage test programs. Some of the areas of testing include structural testing, armament, pressure, and windblast., • Coordinate required resources and schedule required to conduct testing, • Interface with customers, • Write test procedures and test reports, • Travel as required within the continental US, • Overtime will be required during certain periods of a project Required Qualifications: • BSME or comparable, • 4+ years' experience working as a Design Engineer, • Currently hold an FE certification and eligible to go for a PE, • A PE licensure will eventually be required, • Strong proficiency using Autodesk Inventor/ Assembly handling or equivalent software, • Experience in mechanical CAD design (Autodesk Inventor), ability to perform simple design hand calculations, fixture design, and especially fixture design for testing products, • Knowledge of FEM/Analysis, • Must be a US Citizen and able to pass a drug test and background check, • Expertise in defense, aerospace, telecom, commercial, and/or automotive product qualification requirements, • Ability to read and interpret test specifications, • Must be computer literate, including MS Office, • Must be able to work in a fast-paced work environment, • Ability to work without supervision and to provide technical consultation and guidance, • Experience managing labor and resource schedules, • Strong communication skills, both written and verbal, • Demonstrated technical innovation/guidance, project management, and problem solving, • Experience in using FEM software like ANSYS is a plus but not required, • Experience with CNC machining beneficial but not required Dayton T. Brown, Inc. offers: • Competitive salaries, • Tuition Reimbursement at up to 100%, • Medical/Dental/Vision/FSA, • 401k with company matching, • Paid time off, • Group life insurance, • Employee activities, • A family-friendly work culture Job Posted by ApplicantPro

Job Description Job Summary The Design Engineer 3 provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description FLSA Status: Salary/Exempt Reports To: General Manager Direct Reports: None Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision-making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Minimum Qualifications Education and Experience • Bachelor of Science in engineering or related field, • 3-10 years of design engineering or relevant experience, • 2-5 years of electrical connector design experience Knowledge • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Other responsibilities, initiatives and ad-hoc projects as required. Compensation range: $90,000 - $125,000

Job DescriptionIntroduction Are you a technology-focused, problem solver individual looking to advance your career? If so, we’ve got an exciting opportunity for you. We are IVIONICS, a growing technology organization in search of a talented Level III Engineer to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills., • Competitive Compensation. We recognize your hard work and want to reward you for it. In addition to a competitive salary, all employees are eligible for a comprehensive suite of additional benefits including medical/dental/vision, retirement plans, paid-time off, and more.Responsibilities:, • Deliver expert service focused on the timely resolution of issues while exceeding client expectations for quality and professionalism., • Receive incoming technical issues and requests that will include software, hardware and operating system problems for all company and customer-supported technologies. This will include desktops, laptops, wireless devices, peripherals, and commercial as well as proprietary software within the organization., • Perform general break/fix and preventative maintenance functions as necessary: provide hands-on and/or remote support to desktops, laptops, wireless devices, and peripherals. You may also be required to perform basic hardware/software troubleshooting on servers and other network components., • Perform all build, configuration, and install services for desktops, laptops, wireless devices, peripherals etc., • Escalate issues and requests to higher level (Engineering Teams, Application Development, 3rd-party Vendors, etc.) whenever necessary in accordance with pre-defined SLA’s., • Open, track, escalate and resolve each assigned ticket in our in-house problem ticketing system.Technical Experience:, • Advanced working knowledge of Microsoft Windows desktop operating systems, including deployment, configuration, and in-depth troubleshooting across all supported versions through Windows 10. Ability to resolve complex OS-related issues across diverse environments., • Expertise in Microsoft Office Suites through Office 365, including advanced troubleshooting of Outlook connectivity, Office activation issues, and integration with Exchange and SharePoint Online in a business setting., • Hands-on experience leading and executing O365 migrations, including mailbox moves, DNS record updates, identity management (AAD Connect/Hybrid), and post-migration troubleshooting and optimization., • In-depth knowledge of wireless devices and wireless networking, including configuration, optimization, and troubleshooting of enterprise-grade Wi-Fi systems across multi-SSID/VLAN environments., • Strong understanding and administration of Microsoft Windows Server environments, including Active Directory, DNS, WINS, and DHCP. Able to design and troubleshoot complex domain issues, including multi-site replication, FSMO role management, and Group Policy enforcement., • Experience administering Microsoft Exchange Server (on-premises) and cloud-based mail services, including hybrid environments, mail flow troubleshooting, retention policies, transport rules, and disaster recovery procedures., • Proficient with Microsoft Intune (Endpoint Manager) for advanced policy creation, application deployment, device compliance, and integration with Azure AD Conditional Access., • Experience with deploying and supporting Azure Virtual Desktop (AVD/VDI) environments, including profile management, autoscaling, session host image creation, and performance tuning in production environments., • Working knowledge of VMWare technologies, including ESXi and vCenter management, virtual machine provisioning, snapshot management, resource allocation, and basic HA/DR configuration, • Demonstrated ability to implement and configure firewalls, including rulesets, VPN tunnels, NAT, and security policies for SMB/enterprise environments. Comfortable working with vendor-specific platforms., • Experience with deployment and management of managed switches, including VLAN segmentation, trunk/access port configuration, link aggregation, and QoS prioritization., • Operational expertise with Meraki wireless solutions, including dashboard configuration, access point provisioning, SSID setup, firmware management, and guest networking with content filtering, • Working understanding of networking architecture and equipment, including routers, firewalls, switches, structured cabling standards, and VoIP systems; ability to diagnose and resolve connectivity and performance issues at all layers of the OSI model., • Hands-on experience with backup technologies, including configuration and management of hardware-based, software-based, and cloud backup solutions. Familiar with versioning, retention policies, and recovery testing., • Working knowledge of security-related technologies, including multifactor authentication (MFA), endpoint encryption, application control, and compliance-aligned security practices within client environments., • Proficient in hard drive imaging techniques using tools such as Clonezilla, MDT, or similar; experience creating, deploying, and managing standardized workstation images in multi-user environments., • Operational knowledge of call center tools, including deployment and support of client-side applications and VoIP integrations in environments requiring call routing, recording, and CRM linkage.Requirements:, • Bachelor’s degree in an IT-related discipline or equivalent work experience., • 5-7 years full-time experience in a technical support role, ideally at a Managed Service Provider, • Technical certification in a relevant technology discipline. (preferred), • Must have reliable transportation, a valid NYS driver’s license and be willing to travel throughout the New York Tristate area., • Able to work in a fast-paced, high-pressure environment., • Excellent oral and written communications skills., • Excellent Customer Service skills., • Able to interact effectively with all levels of internal and customer contacts. OtcveEyNiG

Job Description Professional Engineer Engineerings Skills required: • Structural Engineering- design, analysis, calculations, field evaluations, wood, steel, concrete, • Civil Engineering- site design, wastewater, drainage, retaining walls, grading, • Building Inspections- pre-purchase, system specific stuctural and/or diagnosis, • AuotCAD, • Professional Engineer preferred, Intern or degreed engineer will be considered Business Skills required: • Manage multiple projects on quick turnaround, • Organized, • Client communication Other requirements:

Job Description Narda MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: The RF/microwave Amplifier Design Engineer is an experienced professional with the capability to design discrete transistor and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies. Able to synthesize and develop new amplifier components using CAE analysis tools and has hands-on bench troubleshooting and test skills. The individual effectively communicates with contacts inside and outside of own department, customers, and suppliers. Recommends enhancements to systems and processes. Possesses practical project management skills and will work under general supervision to achieve technical performance while meeting schedule and cost operational targets for specific programs and projects with moderate impact on departmental results. Essential Functions: • Design, develop, test and support production of discrete and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies., • Conceptualize and develop new RF and microwave circuits, packages, and products., • Perform linear and nonlinear circuit simulations of microwave active and passive circuits., • Provide direction on hi-reliability specifications, i.e., the screening and testing for our products to be compliant., • Develop specifications for microwave components and subassemblies., • Generate design review presentations and test reports., • Design for ease of manufacturing., • Estimate and track project schedules and labor for engineering developments., • Bachelor’s Degree in Electrical Engineering and a minimum of 4 years prior relevant experience or a Graduate Degree and a minimum of 2 years prior related experience., • A minimum of 2 years designing and simulating low noise amplifiers., • Experience designing RF/Microwave passive components, e.g., couplers, power dividers and attenuators., • Ability to manage projects and interface to other areas., • Experience designing products for manufacturing., • Proficient in linear CAE and experience with non-linear CAE., • Ability to work under a microscope in a clean room environment to test and tune circuits., • Experienced user of microwave test equipment; including network analyzers, noise figure analyzers, spectrum analyzers, power meters and signal generators., • Familiarity with device semiconductors, such as GaAs and GaN., • Ability to gain Secret Level Security Clearance., • Familiarity with MIL specifications, such as MIL-PRF-38534 and MIL-STD-202., • Hands-on experience testing and aligning fine pitch circuits under a microscope., • Design experience with oscillators, synthesizers, and PIN diode circuits., • Knowledge/application of filter synthesis and design., • System analysis experience comprising both cascade and spur analysis., • Proficient use of Keysight ADS, Keysight RFPro, and/or Ansys HFSS simulation tools., • Perform EM simulations of microwave housings, boards, transitions, and passive circuits., • Use of CAD tools such as AutoDesk Inventor and AutoCAD., • Design/test experience of circuits operating through 26GHz is favored, with operation up through 40GHz further preferred., • Experience with both chip and wire hybrid and PCB surface mount manufacturing methods., • 401k, • Health/Dental/Vision insurance, • Life Insurance, • Paid time off, • Tuition Reimbursement Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description NSI Industries – HVAC Division (Duro Dyne & Supco ) is seeking a dynamic individual to become part of our winning team. If you are a highly motivated team player who is interested in an exciting career with a leading global manufacturer then this job is for you! You will be mainly responsible for building and maintaining strong relationships with regional accounts consisting of HVAC wholesale distributors and ductwork/sheet metal fabricators. The Mechanical Engineer primary function is to lead the design, analysis, and optimization of HVAC systems. Job Duties: • Ensure implementation of Company safety, health and environmental programs for employees whose work is directed. Ensure that safe work practices are followed, and the environment is fully protected in accordance with Company policy and governmental regulations., • Commitment to the Company’s policies, principles, and procedures and adheres the Company’s procedures including Environmental, Health and Safety (“EH&S”), Equal Employment Opportunity (“EEO”), discipline/corrective action, and security., • Provides overall engineering coordination for projects; performs and/or supervises the preparation of scope, pre- schematic, schematic, preliminary and construction documents, including reports, drawings, and specifications of HVAC products., • Works with a wide range of technical, professional, managerial and support personnel as well as outside consultants, contractors, vendors, • Constructs models and prototypes of the product, then evaluates the design through testing., • Studies the test data and makes comparisons with similar designs., • Develops control systems and monitors production., • Staying abreast of building codes, standards, and regulations, the engineer ensures that all HVAC designs and installations comply with industry requirements., • Develop machine drawings, 3D modeling, assembly and detail drawings., • Interface with manufacturing to ensure parts are properly fabricated, machined, and assembled., • Identifying deficiencies in mechanical processes and developing improvements, • Designing and developing prototypes., • Develop testing processes and perform testing and validation of new designs., • Analyzing and testing prototypes and each revision of a device., • Designing and developing prototypes, • Knowledge of electrical schematics., • Proficient with Autocad, Solidworks, and Inventor., • Must be able to work 8AM-5PM Monday-Friday, • Ability to communicate effectively and clearly., • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift up to 50lbs., • Must be able to work on machinery., • 401(k), • 401(k) Matching, • Health/Dental/Vision insurance, • Flexible Spending Account, • Dependent Spending Account, • Company Paid Life Insurance & AD&D, • Short & Long Term Disability, • Paid Time Off & Paid Holidays, • Referral Program NSI Industries is proud to be an EEO employer M/F/D/V. NSI Industries is an equal opportunity employer and, as such, affirms in policy and practice its commitment to recruit, hire, train, and promote, in all job classifications, without regard to race, color, creed, religion, sex, gender, age, national origin, marital status, sexual orientation, gender identity, gender expression, citizenship, eligible veteran status, disability, or any other status protected by law. Job Type: Full-time Salary - $80k-$100k Benefits: NSI Industries offers a competitive salary, performance-based and attendance bonuses for certain roles. We offer health, dental, and vision insurance. Retirement savings plan with company match. Paid holiday time off and vacation. EEO employer M/F/D/V: NSI Industries is an equal opportunity employer and, as such, affirms in policy and practice its commitment to recruit, hire, train, and promote, in all job classifications, without regard to race, color, creed, religion, sex, gender, age, national origin, marital status, sexual orientation, gender identity, gender expression, citizenship, eligible veteran status, disability, or any other status protected by law. Reasonable Accommodation: NSI Industries is committed to providing reasonable accommodation for qualified individuals with disabilities. If you require assistance or accommodation during the application process, please contact your Recruiter for assistance. We comply with federal and state disability laws and make reasonable accommodation for applicants and employees with disabilities to ensure equal employment opportunities. Physical Work Requirements: Many roles at NSI Industries require physical activities where the employee must occasionally lift and/or move items or require specific vision abilities. Drug Free Workplace: NSI Industries maintains a drug-free workplace and requires all employees to complete and pass a pre-employment drug screen and background check. Powered by JazzHR vtdO6UIf7x

Job DescriptionStructural Design Engineer My name is Bill Stevens, and I have a new full time Structural Design Engineer opportunity available for a major firm located in North Babylon, Long Island that could be of interest to you, please review my specification below. This position will be paying a fulltime salary of $140,000 - $160,000 and an outstanding benefits package. Responsibilities: Primary responsibility is for structural design and analyses of commercial and industrial structures and facilities located on Suffolk Long Island, working in conjunction with other engineers, designers and architects in the firms North Babylon, Long Island office. The ideal candidate will also have responsibility for occasional field inspections. The candidate should have familiarity with Long Island building codes and zoning ordinances. Experience: The ideal candidate should have an engineering education. Professional Engineering (PE) is preferred and at least seven years of practical experience will be considered for this role. The interview process will include an initial telephone or Zoom screening. Please let me know your interest for this position, availability to interview and start for this position along with a copy of your recent resume.

Job DescriptionSalary: $26-28 per hour Impact Environmental has an immediate opening for a motivated Environmental professional reporting to our Long Island, NY office. A large part of the position will be on job sites around Long Island and to NYC. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Knowledge of New ork State Department of Environmental Conservation (NYSDEC) and NYC Office of Environmental Remediation (NYCOER) regulations and guidance., • Assist in ensuring compliance with all federal, state, and local regulations., • Perform and manage technical tasks such as fieldwork, including sampling, operations and maintenance of remedial systems., • Well installation, soil boring, drilling and construction oversight., • Compile and evaluate data and assist in report preparation., • Work within quality/budget/schedule expectations and scope-specific assignments., • Communicate with subcontractors, regulatory agents, tenants, and clients during field activities., • Report writing on environmental projects in the public and private sector., • Participate in functions involving contact with client representatives., • Bachelors degree in civil or environmental engineering, geology, or environmental science is required., • Direct experience in essential duties listed above, including demonstrated ability in technical writing., • Direct experience in preparing documents such as Phase I and II ESAs, PAs, SIRs, RIRs, RAWs, RARs, and SPCCs is a plus., • Working knowledge of Microsoft Word and Excel required; knowledge of computer-based CADD a plus., • OSHA 40-hour HAZWOPER training and current 8-hour refresher training are strongly preferred., • Strong oral and written communication/interpersonal skills are a must, as well as the ability to thrive in a professional and team-oriented work environment., • Ability to multi-task, maintain flexibility, travel, and work independently., • Candidate must possess a valid drivers license in good standing., • Medical, • Dental & vision, • Long term disability, • Paid holidays, • Paid time off, • Retirement plan, • Flexible Spending Account, • Dependent Care Account

Job DescriptionPart Time Electrical Engineer needed for preparing prototypes and testing. Power electronics experience helpful. Retirees welcome. Full Time electrical engineers who want to supplement main income also welcome. minimum 3-5 years experience Competitive Hourly rate. Ronkonkoma Office (near ISP airport). Need to start ASAP.

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description We are seeking a Mechanical Engineer / Designer to become a part of our team! You will prepare detailed and modeling of metal and wood parts using 3D CAD software. Detailing/design as well as identify areas of improvement to increase efficiency. Day-to-day tasks include working across departments, interacting with our vendors, and producing detailed designs and drawings for customizable consoles and control room solutions, ensuring accuracy and alignment with client specifications. Responsibilities: • Detail and Model Products using 3D CAD software, • Program CNC machine in Mastercam and/or Fusion, • Review and modify designs collaboratively to reduce production deficiencies, • Provide timely updates for drawing completion and workload, • Previous experience in mechanical drafting, manufacturing or other related fields, • Strong skills in AutoCAD, Inventor, or Solidworks (5 years +), • Familiarity with designing with sheet metal and/or woodworking, • Ability to work independently and collaboratively, • Familiarity with CAD or other related software and ability to learn new programs, • Deadline and detail-orientedCompany DescriptionTBC designs, manufactures, and installs technical furniture systems. Our focus is building consoles, from single operator desks to sophisticated 24/7 control room furniture; we provide the products and the expertise to create ergonomically correct and organized work spaces that lead to greater efficiency, productivity and personal performance.TBC designs, manufactures, and installs technical furniture systems. Our focus is building consoles, from single operator desks to sophisticated 24/7 control room furniture; we provide the products and the expertise to create ergonomically correct and organized work spaces that lead to greater efficiency, productivity and personal performance.

Job DescriptionSalary: Anticipated $75k + Company Overview At Citnalta Construction Corp., we build more than just structures - we build lasting relationships and stronger communities. Over the past 50 years we've grown into a leading Design Builder and General Contractor in the NY Metro area. By putting people first, we prioritize safety, sustainability, and high-quality projects, upholding integrity and ensuring responsibility in everything we do - now and for the future. About the Job We are seeking highly motivated Engineers/Estimators to join our team. In this entry-level role, youll play a key part in supporting our estimating and preconstruction efforts. You will assist in reviewing project plans, performing quantity takeoffs, developing cost estimates, and coordinating with internal teams to ensure timely bid submissions. Youll also gain valuable hands-on experience through site visits and exposure to real-world construction methods. This is an excellent opportunity for recent graduates or early-career professionals looking to build a strong foundation in construction engineering and estimating. Prior experience through internships or related roles is a plus, but not required we provide comprehensive training to help you succeed. Qualifications • Bachelors degree in Engineering or Construction Management (Engineering preferred)., • 03 years of relevant work experience in estimating, engineering, or project support is preferred, but not required (training provided)., • Familiarity with CADD software and Bluebeam (ability to navigate drawings; proficiency not required)., • Proficient in Microsoft Excel and Word., • Previous internship or co-op experience in construction or design is strongly preferred., • Strong communication and organizational skills., • Ability to work collaboratively in a team environment., • Willingness to travel to project sites as needed. You'll Thrive with Us if You Are • Driven by a desire for continuous learning and personal growth, always striving to improve., • Able to take the initiative and work harmoniously with others, • Committed to embodying Citnalta's values of integrity, professionalism, and inclusion in everything you do. What You'll Love About Working with Us • Work on exciting, impactful projects that push boundaries and shape the future of construction and infrastructure., • Hands-on training and mentorship from senior staff, • Opportunity for growth in both engineering and estimating tracks, • Employer Paid Medical, Dental, and Vision Insurance, • Employer Funded HRA, • 401(k), • Paid Holidays, • Paid Time Off, • Tuition Reimbursement At Citnalta, we are committed to fostering a diverse and inclusive workplace. We provide equal employment opportunities to all employees and applicants, and make all employment decisions, including hiring, compensation, promotion, benefits, training, and termination, without regard to race, color, age, sex (including pregnancy, sexual orientation and gender identity), national origin, ancestry, religion, disability, military or veteran status, marital status, genetic information, arrest or conviction record, or any other characteristic protected under federal, state, or local law.

Job DescriptionSalary: $120-$150K Position: Sr. Electrical Design Engineer / Project Engineer III Location: Bohemia, New York Overview: We are seeking a highly skilled Electrical Design Engineerwith a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems. The ideal candidate will have a solid theoretical background in electrical engineering, specifically in power supply design, and experience with designing for manufacturing. Key Responsibilities: • Apply a strong theoretical background in Electrical/Power Supply Concepts to design and develop power supply systems that meet the required specifications and standards., • Design for Manufacturing (DFM): Ensure all designs are optimized for ease of manufacturing, considering cost, scalability, and quality control., • Utilize hands-on experience in electrical power supply design to innovate, troubleshoot, and refine power supply products. Qualifications: • Bachelors degree in electrical engineering or a related field., • 5-10 years of hands-on experience in power supply electrical design, • Thermal system design for power supply, • Knowledge of safety and reliability standards for power conversion devices, • Knowledge in firmware programming a plus, • Knowledgeable in simulation, computation program is a plus, • Manufacturing best practices knowledge is a plus Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job Description Power Device Corporation (PDC) is seeking a Mechanical Engineering & Staff Director to join our Engineering team located in Poway CA. This position will oversee and direct the Engineering Team in Poway as well as Mechanical Engineers and Draftspersons in all PDC locations. (Poway CA, Bohemia NY, and Isle of Wight UK) The Mechanical Engineering Director has responsibility for management, preparation and coordination and of all technical activities on Mechanical and Process engineering aspect of a project. Plans, schedules, conducts, and coordinates assigned engineering work; monitors work for compliance to applicable engineering practices and standards; ensures effective communication and coordination on assigned projects between disciplines and all other project participants. This is a working position of Mechanical and SMT Process so the applicant is expected to have significant technical knowledge and awareness to be able to recognize when technical problems are developing and to initiate appropriate corrective actions. Responsible for managing staff, allocating resources, and directing the activities of other engineers to successfully execute projects. Create manpower workload. Mentor and train staff. Assist with interviews and evaluations of potential key hires. Responsibilities • Drive methodology within the Mechanical Engineering group., • Prepare for PDR’s and CDR’s and be the main technical representative for the mechanical engineering group., • Communicate and coordinate with other engineering disciplines., • Manage mechanical, Process, and Documentation staff, allocate resources, and direct the activities of other engineers., • Mentor and train mechanical staff., • Prepare, review, and oversee complete drawings and specifications Qualifications • Bachelor of Science degree in Mechanical Engineering or relevant work experience., • 10+ years of Mechanical design and technical lead roles., • Strong Knowledge of commercial, Avionic and Military design practices., • Experience with thermal and modal analysis using Solidworks., • Experience 3D modeling using Solidworks. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies.Our products and services are used by the military, aerospace, and industrial markets, helping to advance tec

Perform Design and system-level testing on IO products.

Job Title: Senior Estimator (Civil Engineering / Sitework - Long Island) Location: Suffolk County, Long Island, New York Industry: Heavy Civil / Infrastructure Construction Position Type: Full-Time, In-Office * “This position is focused on civil construction and site development. Candidates with backgrounds in residential, interior fit-outs, or vertical construction will not be a fit for this role.” About the Opportunity: Our firm has been exclusively retained by a well-established and highly respected heavy construction and civil engineering company located in Suffolk County, Long Island. This firm specializes in complex infrastructure and public works projects across Long Island and has built a reputation for delivering high-quality work across roadwork, utilities, site development, drainage, and related scopes. We are seeking an experienced Senior Estimator to lead and manage the estimating process for competitive bids and negotiated work. While the company is prioritizing senior-level talent, we are also open to engaging with mid-level and high-potential junior candidates who demonstrate strong capabilities and have direct experience in the heavy construction or civil engineering sectors. Candidates must be based on Long Island. Key Responsibilities: * Estimate Preparation: Lead the preparation of cost estimates and bid proposals for heavy civil projects including roadway, infrastructure, and utility work. * Quantity Takeoffs: Conduct detailed takeoffs and cost analysis from engineering and construction plans. * Subcontractor Coordination: Solicit and evaluate subcontractor and vendor pricing; prepare comparative analyses and recommendations. * Bid Strategy: Attend site walkthroughs and pre-bid meetings; contribute to strategic bid approaches and risk assessments. * Documentation & Organization: Maintain detailed bid files and support bid submissions with clearly documented pricing, scopes, and assumptions. * Mentorship & Collaboration: Collaborate with project managers and executives; mentor junior estimating staff as appropriate. Candidate Profile: * Experience: * Senior Estimator: 8+ years in heavy civil construction estimating. * Mid-Level Estimator: 4–7 years of related experience. * Junior Estimator: 2–3 years with clear potential and relevant industry exposure. * Note: Experience in residential, vertical commercial, or home improvement sectors will not be considered. * Technical Skills: * Proficiency in Microsoft Excel and InSite required. * Experience with Bluebeam, AutoCAD, and HeavyBid highly desirable. * Strong math and analytical skills essential. * Education: * Bachelor’s degree in Civil Engineering, Construction Management, or related field preferred. Equivalent hands-on experience will be considered. * Location Requirement: * Candidates must live on Long Island or have a reliable daily commute to Suffolk County. Why This Opportunity? * Work with a highly regarded civil contractor known for quality and stability * Competitive compensation and comprehensive benefits * In-house collaboration, no remote work — a strong team-oriented culture * Career advancement for junior or mid-level candidates with the right background Eligibility: U.S. Citizens or U.S. Green Card holders only. No visa sponsorship or transfers available.

Integrates vision algorithm solutions into Zebra products, optimizing for embedded systems and Linux environments. Intimate knowledge of vision technologies and deployment strategies for embedded systems and cloud environments. The Firmware/Software Engineer will focus on integrating vision algorith

With design and manufacturing sites in North America, Europe and Asia, we have become the preferred provider of high voltage power solutions for OEMs pushing the boundaries of technology around the world by designing and producing the products they need to power progress. Direct/manage/lead North Am

Job Title: Engineering Technician(Entry Level). Seeking candidate for entry level engineering technician.

Promotional: One year of permanent competitive or 55-b/55-c service as an Engineering Geologist, Engineering Materials Analyst, Environmental Engineering Technician 2, Senior Drafting Technician (all parenthetics), Senior Engineering Technician, or Senior Engineering Technician (Soils). FOUR years o

Willing to relocate to New York or Arizona or Connecticut or California; in order to provide long-term, on-site technical support to our customer.

We at Spellman High Voltage Electronics Corporation believe that each individual is entitled to equal employment opportunities without regard to race, color, creed, gender, sexual orientation, gender identity, marital status, national origin, age, veteran status or disability. Spellman High Voltage

Operate and maintain heating, ventilation and air conditioning (HVAC) systems. Troubleshoot, repair and calibrate electronic and pneumatic combustion and HVAC control systems. Ability to perform complex and routine repairs and maintenance on heating, cooling, HVAC equipment along with general mainte

We are seeking a dedicated and skilled engineer to contribute to exciting projects in the field of test and evaluation engineering. Experienced Test And Evaluation Engineer.

Engage with stakeholders to gather requirements and provide feedback throughout the development lifecycle. Bachelor's degree in electrical engineering or related field. The Test Engineer will be responsible for testing and validating high voltage power supplies, systems, and components, ensuring tha

Presidio, Where Teamwork and Innovation Shape the Future.AtPresidio, we're at the forefront of a global technology revolution, transforming industries throughcutting-edge digital solutions and next-generation AI.We empower businesses-and their customers-to achieve more through innovation, automation

Job Description Introduction Are you a technology-focused, problem solver individual looking to jump-start your career? If so, we’ve got an exciting opportunity for you. We are IVIONICS, a growing technology organization in search of a talented Level I Systems Engineer to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills. Level I (Entry-Level) • Respond to incoming requests for desktops, laptops, software, and network devices, • Assist with installations, configuration, and troubleshooting of hardware/software, • Collaborate with senior engineers for ticket escalations and hands-on training, • Maintain documentation and accurate ticket recordsLevel II–III (Mid to Senior-Level), • Deliver escalated technical support, both remotely and on-site, • Handle system builds, server configuration, network architecture, and backups, • Collaborate with QA and Dev teams to test and document custom software solutions, • Identify system improvements, support application development QA, and help shape internal processes, • Mentor junior engineers and lead client communications when neededRequirements:, • Bachelor’s degree in IT, Computer Science, or related field—or equivalent experience, • 0–5+ years experience in a technical support or QA role, • Industry certifications (e.g. CompTIA, Microsoft, Cisco) a plus, • Must have reliable transportation, a valid NYS driver’s license and be willing to travel throughout the New York Tristate area., • Able to work in a fast-paced, high-pressure environment., • Excellent oral and written communications skills., • Excellent Customer Service skills., • Able to work flexible shifts and be available for 24x7 off-hours coverage rotation (nights & weekends).Helpful Tech Experience:, • Microsoft OS, Office 365, Exchange & Active Directory, • Windows Server (2016+) and basic virtualization (VMWare, Citrix), • Routers, switches, firewalls, VoIP, and cabling best practices, • QA testing tools, Chrome Dev Tools, and website/application troubleshooting, • Ticketing systems and documentation platforms, • Salary: $50,000 - $95,000+, commensurate with experience, • A team/family work environment, • Business casual dress code, • Medical, Dental, Vision, HSA & FSA, • 401k and Profit Sharing IVIONICS is committed to being an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, ethnicity, age, disability, marital status, veteran status, or any other characteristic protected by law. Powered by JazzHR oa1hPpZHna

Skills And Qualifications: Hands-on experience managing Kubernetes clusters and Linux systems administration Proficient in Python, Shell scripting, Perl, Ruby, or similar languages for automation and infrastructure management Skilled in automating deployments with Terraform, Ansible, or similar tool

Cloud Virtualization Engineer II. Cloud Virtualization Engineer II Must Have Current Telecom Customer Exp KubeVirt, VMware, and Hyper-V Kubernetes clusters and Linux systems administration Python, Shell scripting, Perl, Ruby.