Environmental jobs in Houston, Texas - Page 20Create job alerts

Job DescriptionDescription: Summary The Tower Crane Operator controls a fixed or traveling tower crane to lift, move and position heavy materials on high-rise and infrastructure projects. This position requires mastery of load charts, communication and precision controls, as well as strict adherence to safety protocols. Operators must be able to climb to the cab, work long shifts in varying weather and maintain focus and situational awareness at all times. Key Responsibilities • Pre-lift planning and inspection, • Review lift requirements with the lift director and understand site conditions that could affect crane operations., • Perform daily pre-operational inspections (wire rope, brakes, limit devices, hooks and critical parts) and ensure all control functions respond properly., • Use the crane’s load rating charts and diagrams to confirm the correct configuration for the load, site and lift conditions., • Operating the crane, • Operate tower cranes using levers, wheels or foot pedals to lift and move materials according to a lift plan or schedule., • Communicate constantly with riggers, signal persons and workers on the ground via radio or standardized hand signals to coordinate lifts and ensure safe loading/unloading., • Track wind speed, load charts and crane performance during shifts; pause operations when wind speeds or site conditions exceed safe limits., • Coordinate with other operators on multi-crane jobs to avoid conflicts and collisions., • Operate smoothly and avoid any practices that might divert attention while at the controls., • Safety and compliance, • Refuse to operate if any load or part of the crane could enter the danger zone of energized power lines., • Follow OSHA and ASME procedures for lock-out/tag-out during maintenance or when repairs are required., • Set brakes, lock devices and land suspended loads when power fails or before leaving the crane unattended., • Keep records of materials moved, daily inspections and any minor repairs performed., • Post-operational duties, • Secure the crane at the end of each shift, including bringing the hook to the highest position, releasing slewing brakes as specified, restraining travel and disengaging the master control circuit., • Report any needed adjustments or repairs promptly to a designated person., • Conduct frequent inspections and arrange for periodic operator re-qualification (every five years or sooner if necessary). Requirements: Required Qualifications • Education and Experience, • High school diploma or equivalent., • Several years of construction experience, preferably with hoisting, rigging or heavy-equipment operations., • Completion of a formal tower crane training program and apprenticeship is highly preferred., • Certification and Licensing, • Must be at least 18 years old and meet OSHA’s 29?CFR?1926.1427 training and certification requirements., • Hold an accredited tower crane operator certification such as NCCCO CCO-Tower Crane; pass both written and practical exams and maintain re-certification every five years., • Comply with any state or local licensing requirements (e.g., New York’s Certificate of Competence, Washington state permits)., • Physical and Medical Requirements, • Meet physical qualifications outlined by ASME B30.3: vision of at least 20/30 in one eye and 20/50 in the other, ability to distinguish colors, adequate hearing, and sufficient strength, endurance, agility and coordination., • Possess depth perception, manual dexterity and reaction time without tendencies to dizziness or seizures; pass substance-abuse screening and periodic physical exams., • Able to climb to the crane cab, work at height for long periods and tolerate extreme weather conditions., • Skills and Competencies, • Strong communication and teamwork skills for interacting with lift directors, riggers and other crew members., • Excellent coordination and steady hand-foot control to guide heavy loads precisely., • Mechanical aptitude to perform basic maintenance and identify equipment issues., • High situational awareness and problem-solving ability to adapt to changing site conditions. Training and Professional Development Employers typically expect completion of OSHA 10-Hour or 30-Hour Construction training, fall-protection and electrical-safety courses. Continuing education, periodic recertification and regular medical exams are required to maintain certification and compliance. Operators are encouraged to cross-train on other crane types and to stay current with emerging digital technologies (load-monitoring sensors, telematics, remote-control systems) to enhance lift accuracy and safety

Job DescriptionPurpose of the position The main purpose of this position is to analyze product failures, find out the causes of failures, and propose improvement measures, so as to improve product quality and reliability and reduce costs. Duties and Responsibilities • Analyze the causes of failures: Use professional analysis techniques and tools to conduct a comprehensive and in-depth inspection and analysis of failed products, and determine the root causes of product failures, including design defects, material problems, manufacturing process deviations, environmental factors, etc., • Provide improvement suggestions: Based on the results of failure analysis, put forward specific improvement suggestions and measures to relevant departments such as R&D, production, and quality control. This helps to optimize product design, perfect the production process, and strengthen quality control, so as to prevent similar failure problems from occurring again in subsequent products., • Improve product quality and reliability: By continuously solving product failure problems, improve the overall quality and reliability of products, enhance the competitiveness of products in the market, reduce the after-sales failure rate and maintenance costs of products, and improve customer satisfaction., • Bachelor’s degree in Electronic Engineering, Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, or related field., • 1+ years of experience in server manufacturing engineering.Skills:, • Failure Analysis Techniques: Be proficient in various failure analysis methods, such as metallographic analysis, electron microscopy analysis, X-ray diffraction analysis, etc., and be able to accurately determine the failure modes and causes of products. Vpk5v95LKX

Job Description JOB SUMMARY The CT TECHNOLOGIST, under the direct supervision of a radiologist, performs specialized computerized tomographic procedures using ionizing radiation scanning equipment. ABOUT US For more than 40 years, ATC Healthcare has provided leading nurses and healthcare professionals to hospitals and facilities nationwide. Healthcare systems around the U.S., including municipal health systems, multi-unit senior care companies, governments, school systems, VMS and MSP vendors trust us to deliver more than 100,000 nurses and other healthcare professionals on-demand. If you have a track record of success in healthcare, we want you to join us! We offer the following benefits: • Medical insurance, • Dental insurance, • Vision insurance, • Referral program, • Tuition reimbursement, • 401k Plan, • Flexible Schedules, • Life insurance, • Disability insurance, • Identity theft insurance Graduate of an AMA approved CT program of study at the associate’s or bachelor’s degree level. LICENSURE State specific; current and unrestricted license or registration to practice as an CT technologist in the state of practice, as applicable. ARRT registration. REQUIRED CERTIFICATIONS: One year of current CT technologist experience in the clinical setting. Must have: candidates without these skills will not be considered for the role. • GE Scanner experience Current CPR; and other health and screening tests as required by specific facilities and/or regulatory agencies. ENVIRONMENTAL WORKING CONDITIONS Various client facility settings; possible exposure to blood, bodily fluids, and other potentially infectious materials. REPRESENTATIVE DUTIES AND RESPONSIBILITIES • Complies with ATC policies/procedures., • Complies with client facility policies/procedures., • Documents accurately and completely services provided., • Maintains confidentiality relative to patient care and facility practices in accordance with the Health Insurance Portability and Accountability Act., • Provides patient care in a non-judgmental, non-discriminatory manner that considers cultural diversity and age appropriateness so that autonomy, rights, and dignity are preserved., • Communicates information effectively to appropriate personnel., • Maintains competency by participating in continuing education programs and meets state specific requirements., • Sets up and explains procedure to patient., • Operates or administers intravenous contrast injectors/injections., • Evaluates CT Scans to determine if additional scanning is needed., • Perform 3 dimensional reformations of CT scans on computer., • Monitors patient safety and comfort and views images of area being scanned on video display screen to ensure quality of pictures., • Performs other related duties as assigned. Other Duties: Please note this job summary is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may vary by assignment and may change at any time with or without notice. Equal Opportunity Employer: ATC Healthcare Services is an Equal Opportunity Employer. All applicants will be considered for employment without regards to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or dis bility status or any other category protected by Federal, State or local law. M/F/D/V EOE ADD TAG

Job Description Job Overview: Monitors, controls, and analyzes product and process quality to meet internal and external requirements. Duties and Responsibilities: • Ensure adherence to internal quality standards and customer-specific requirements across products and processes, • Collect, analyze, and report on quality data and defective materials, identifying root causes and distinguishing between component- and process-related issues, • Lead and support preventive and corrective action processes (e.g., 8D, IPAN), including implementation and follow-up, • Collaborate with cross-functional teams to resolve internal quality issues and respond to customer/vendor concerns and claims, • Manage non-conforming materials through hold/release processes, screenings, rework coordination, and purge activities, • Support new product introductions (NPI) and product changes with quality planning, documentation, and risk assessment, • Participate in and support internal and external audits (e.g., ISO 9001, ESD, 5S), and contribute to continuous improvement initiatives, • Investigate material damage (e.g., vendor, transport, workmanship) and implement corrective measures, • Supervise and coordinate the activities of technicians and quality control operators; maintain and update work instructions and training materials, • A blend of technical, analytical, and interpersonal skills, such as expertise in quality management systems like ISO 9001 and Six Sigma, strong data analysis and problem-solving abilities, and excellent communication and collaboration skills. They must also have a high level of attention to detail, technical proficiency, and the ability to ensure compliance with standards and regulations. Experience Requirements: Minimum 1 year and with up to 5 years of experience in Quality Engineering, Quality Assurance, or a related field. Education and Qualifications: • High school diploma or equivalent required., • Completion of two years of college or graduation from a two-year technical college with an associate’s degree; or bachelor’s degree Powered by JazzHR c7KsW6gTch

Job DescriptionRole: Electrical Engineer III Location: Houston, TX (On-Site) Experience Level: Senior Employment Type: Full-Time Overview An established infrastructure operator is seeking an experienced Electrical Engineer III to lead complex electrical engineering initiatives supporting critical operational facilities. This role blends technical depth in power systems with project leadership responsibilities. You will design, optimise, and support electrical distribution systems across industrial facilities while ensuring alignment with operational, safety, and regulatory standards. Key Responsibilities * Design, implement, and optimise electrical systems and power distribution networks supporting infrastructure such as pipelines, compressor stations, and storage facilities * Develop one-line diagrams, electrical schematics, system layouts, and perform load calculations * Integrate advanced technologies including automation, real-time monitoring, and energy storage solutions * Implement robust safety measures including arc flash mitigation and fault detection systems * Provide technical expertise for new construction projects and upgrades to existing facilities * Participate in complex engineering projects from concept through completion, ensuring alignment with scope, timeline, and budget * Ensure compliance with safety, environmental, and regulatory standards * Collaborate with multidisciplinary teams to deliver engineering solutions * Support procurement processes for electrical equipment and materials * Participate in commissioning, testing, and startup of electrical systems * Perform additional duties as required Required Education & Experience * Bachelor’s degree in Electrical Engineering from an ABET-accredited institution OR * Bachelor’s degree in Engineering Technology (ABET-accredited) in a relevant field plus Professional Engineer (P.E.) license and 4+ years of engineering experience in natural gas, data centres, or related industries * Minimum 10 years of relevant engineering experience Technical RequirementsCore Expertise * Hands-on experience designing and supporting power distribution systems * Strong knowledge of high-voltage equipment including transformers, generators, switchgear, and related components * Experience developing electrical schematics, system layouts, and performing load calculations * Knowledge of reviewing arc flash studies and implementing mitigation improvements * Working knowledge of electrical design codes (NEC, NEMA, API, IEEE, etc.) * Proficiency in Microsoft Office and general PC applications Power Systems & Analysis * Experience with power system design, analysis, and simulation tools such as ETAP, MATLAB, PSCAD, Simulink, or similar * Understanding of grid integration and renewable energy systems Preferred Qualifications * Professional Engineer (PE) licensure * Master’s degree in Electrical Engineering * Experience with PLC and HMI systems * Experience in Pre-FEED, FEED, or EPC project environments * Project management experience * Experience supporting instrumentation system design and implementation * Experience participating in commissioning, testing, and startup activities Key Competencies * Strong organisational and interpersonal skills * Safety-first mindset * Ability to balance technical depth with project leadership * Clear communication and presentation skills

Job Description We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. As NASA's largest engineering solutions provider working together with NASA at centers across the United States. We have an exciting opportunity for a Volatile Ice Scientist Lead to join the team with Mb Solutions, a teammate company! The Volatile Ice Scientist Lead will: • Serve as the technical and scientific lead for volatile and icy sample research and development activities within cold curation., • Lead the contract team in experimental and analytical investigations to characterize volatile retention, phase stability, and material behavior in icy and frozen samples., • Support the development and implementation of cold and cryogenic curation workflows, environmental controls, and contamination minimization measures., • Support and assist the design, testing, and operational readiness of cold curation facilities and specialized instrumentation, such as cryogenic gloveboxes and sub-zero sample processing tools., • Prepare technical documentation, operational procedures, and research reports of experimental and operational work, • Support the creation and development of protocols for safe, contamination-controlled handling, processing, and long-term preservation of icy and volatile-bearing astromaterials. This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • A BS degree and a minimum of 5-10 years experience are typically required., • Bachelor's degree in planetary science, geoscience, chemistry, materials science, physics, engineering, or a related field., • Extensive hands-on experience handling icy materials, frozen geological samples, cryogenic materials, or volatile-rich specimens in laboratory or operational environments., • Demonstrated expertise in cold or cryogenic experimental science, including instrument operation, method development, or environmental system design., • Strong understanding of contamination control and clean lab principles., • Proven ability to lead scientific or technical teams in laboratory, research, or mission-support settings., • Advanced degree (Master's or Ph.D.) in a relevant scientific or engineering discipline., • Experience with volatiles preservation studies, phase-change behavior, or ice/rock interactions., • Prior work with cryogenic gloveboxes, cryostats, ultra-low-temperature systems, or vacuum/controlled-atmosphere equipment., • Experience supporting NASA sample return missions or other high-containment or specialized scientific operations., • Familiarity with planetary materials, astromaterials curation, or mission requirements definition. Job Posted by ApplicantPro

Job DescriptionSalary: $140k-$150k DOE Senior Electrical Engineer - Level 4 Who We Are We design and manufacture MWD products that are expected to withstand harsh environmental conditions. We invest in our customers because their success is our success. We care deeply about our craft and are committed to delivering the best product and experience to our customers. What Were Looking For A strong technical lead who is flexible to contribute where the need arises. Design.Well occasionally make something new. Expect to design schematics and perform PCBA layout. Engineering Production Support.Our production line needs Engineering eyes. Youll troubleshoot some electronics, learn about calibrating MWD sensors, and help improve our processes. Failure Analysis.The only way to make something better is to understand why it failed. In-depth failure analyses, root causes, and corrective actions. Aggressive customer service means that there will be times when you fly to customer locations and troubleshoot on-site. Growth.Expect to learn and grow. Expect to mentor. Qualifications • Minimum of 10 years of professional experience (ideally in industrial electronics), • Experience in schematic design and PCBA layout, • Advanced troubleshooting of electronics and systems, • Ability to solve challenging problems and make assertive recommendations, • Understand how to balance quality and expedience Duties • R&D electronics design, • Troubleshooting electronics, calibrations, and processes in a manufacturing environment, • In-depth Failure Analysis with occasional travel

Job Description We are seeking an experienced Quality Engineering professional in the medical device manufacturing industry to serve as Project Lead for the development and harmonization of an endotoxin testing strategy across three manufacturing sites. This role will lead and execute risk-based technical assessments in compliance with AAMI ST72 and USP <85>, author key technical documentation, and coordinate cross-functional implementation activities including laboratory, manufacturing, quality systems, and ERP (SAP) updates. Key Responsibilities • Lead the development of risk-based endotoxin testing strategies in accordance with AAMI ST72 and USP <85>., • Author high-quality technical documentation, including:, • Technical risk assessments, • Scientific justifications, • Protocols, reports, and implementation plans, • Apply biological and microbiological principles (e.g., microorganisms, material properties, environmental conditions) to assess and control endotoxin risk., • Serve as cross-site project lead, coordinating activities across three manufacturing locations to harmonize testing strategies., • Drive project execution by:, • Establishing timelines, milestones, and deliverables, • Tracking progress and mitigating risks, • Ensuring on-time completion of commitments, • Partner with Quality Control, Microbiology, Manufacturing, Supply Chain, and IT teams to:, • Implement operational changes, • Modify testing workflows, • Execute required SAP / ERP updates, • Support change management activities, including change controls, training content, and system updates., • B.S. in Biomedical Engineering, Biological Sciences, Microbiology, or a related technical discipline., • 3+ years of experience in a medical device Quality Control or Quality Engineering role, with hands-on exposure to microbiology or endotoxin testing programs., • Minimum 5 years of experience in the medical device manufacturing industry., • Proven experience developing and implementing new or revised quality processes., • Demonstrated capability leading cross-functional, cross-site projects., • Strong working knowledge of medical device quality systems and regulatory expectations., • Excellent technical writing skills, with the ability to clearly communicate complex scientific and regulatory concepts. Preferred Qualifications • Endotoxin testing principles (LAL, risk-based strategies), • Applicable standards (USP <85>, AAMI ST72), • Extensive experience in technical report writing and leading complex cross-functional and cross-site initiatives., • Working knowledge of ERP systems (SAP preferred), including QC master data, inspection plans, or test method configuration., • Strong organizational, communication, and stakeholder-management skills., • Ability to operate independently while influencing without direct authority., • Familiarity with ISO 13485 quality management systems, • Experience supporting change control and validation activities related to test method changes., • This is a 12-month onsite assignment with standard business hours (8:00 AM – 5:00 PM).

Job DescriptionPurpose of the position Foxconn Technology Group, a globally leading electronics manufacturing company, is seeking a product engineer to lead the optimization of product production processes, drive defect resolution in high-volume, high-quality production, and ensure large-scale product reliability. After joining the team, you will have the opportunity to use stencil, Profile, SPI/AOI, 5W1H for root cause analysis of production anomalies, while monitoring production metrics to identify deviations and coordinate cross-functional solutions. Assist in customer agreement validation, document compliance results, and ensure results meet performance specifications. Duties and Responsibilities 1. Led root cause investigations and customer complaint resolution, 2. Led engineer to trained operators to standardize processes., 3. Led designed and applied Stencil plan and effect tracking, 4. Led FA report preparation and report consolidation, 5. Summarize and refine risk points for proactive improvement, 6. Perform other duties and responsibilities as required or requested Education and work experience Associate degree or higher academic qualifications Possess two of the following experiences preferred 1. More than 3 years of process improvement experience, 2. Experience in SMT technology development and new product introduction within the industry, 3. Experience in automation design and development work, 4. Experience in stencil design, 5. Manufacturing plant work experience Working conditions • Join a high-growth, innovation-driven team shaping next-gen consumer electronics. DDqhSs7Lh6

Job DescriptionPosition: Manager, Test Engineering Report to: Senior Manager, Test & FA Engineering Department: Test Engineering Location: Houston or relocation as required Main function • Supervises and manages the work of employees within the assigned test area, • Plans, implements, continuously improves, and coordinates processes related to existing and new products, • Ensures the efficient operation of the test environment, test equipment, and test tools in compliance with customer requirements to support effective testing processes, • Designs and develops test equipment specifications, • Designs and ensures the effective operation of test engineering processes, • Defines the necessary headcount and training needs for the efficient operation of the test engineering departmentDuties and Responsibilities (Including but not Limited to...), • Ensures testing processes are in line with quality standards and customer or otherwise defined specifications, • Responsible for the selection, continuous development, and evaluation of Test Engineers, Test Engineer Assistants, Shift Leaders, and Test Technicians in their organization, • Accountable for the outcomes of activities within the test engineering department, including defining the sub-processes and competence needs required for effective operations, • Proposes and implements continuous improvement solutions, • Supports internal training programs aimed at improving production efficiency, reducing scrap rates, and developing employees' technical skills, • Ensures the necessary training is provided for employees affected by new product introductions, process changes, or technology updates, • As a middle manager, reports directly to the Senior Test and FA Manager, • Order and Discipline, • Maintains order and cleanliness within their area of responsibility, • Encourages and receives employee suggestions related to environmental, occupational, and fire safety topics, • Initiates and supports actions taken in response to EHS-related nonconformities, • Environmental Protection (As an area leader, the employee is responsible for:), • Knowing and minimizing environmental risks related to activities within their area, • Understanding and enforcing the relevant ISO 14001 processes and instructions, • Immediately reporting and participating in the investigation of any environmental incidents, • Cooperating with the Environmental Engineer in all related tasks, • Occupational and Fire Safety (As an area leader, the employee is responsible for:), • Knowing and minimizing occupational and fire safety risks within their area, • Ensuring compliance with the Health & Safety and Fire Safety Regulations and related instructions, • College or university degree in a relevant technical field, • Minimum 5 years of professional experience, including 3 years in a leadership rolePrimary skills, • Fluent English (negotiation level), • User-level proficiency in MS Office, • Strong communication and leadership skills, • Proactive attitude and self-motivation, • Accurate and high-quality work performance, • Assertive presence and exemplary behaviorSecondary skills and competencies, • Precise analytical skills EudpyQMqr9

Job Description We are interviewing for full-time Air Quality Project Specialists/Consultants at our Houston location. Candidates should have between 1 and 5 years of experience in air quality consulting. Position Overview: Interested candidates are not required to have previous consulting experience. This position’s main duty is to come to Spirit ready to learn and absorb as much as possible. However, some previous air quality consulting experience is a plus. This experience can include state and federal air quality regulatory review, site-specific compliance implementation, assisting prepare New Source Review permitting applications, and air dispersion modeling. We strongly encourage potential candidates to apply if they feel confident they could be successful in the role despite not meeting all criteria. Responsibilities: • Complete tasks related to air quality permitting and compliance as required by internal customers accurately and on time;, • Increase your knowledge in all aspects of air quality consulting;, • Quality presentation with QC of personal work;, • Effectively communicate information with internal customers on a task level;, • Develop and maintain trusting professional relationships with team members; and, • Demonstrates skills including effective personal leadership, time management, and problem solving;, • Effective written and verbal communication;, • Fundamental math and science competencies (e.g., unit conversions, use of formulas, data evaluation);, • Proficiency with MS Office (e.g., Word/Excel/Outlook/SharePoint) and time/expense tracking software;, • Proficiency with software and tools applicable to your project (e.g., BEEST, ArcGIS, TRI-ME); and, • B.S. or above in chemical engineering or a related scientific discipline;, • 1-5 years of air quality consulting experience is required;, • A high level of professional ethics;, • Social skills and professionalism necessary to establish and maintain long-term working relationships with clients and co-workers; and As a key member of our Spirit team, you can expect: • Competitive medical, dental, and vision insurance coverage., • 401k with a competitive 4% employer match., • A hybrid office schedule with 2 in-office days per week., • Mentorship and professional development resources to advance your career., • Direct exposure to our industry’s leading experts who are solving the world’s toughest environmental challenges., • An entrepreneurial environment where you can learn, thrive, and collaborate with talented colleagues., • Progressive vacation policies, company holidays, and paid parental leave benefits to ensure work/life balance. If this opportunity inspires you and our Core Values (People, Integrity, Continuous Improvement, Excellence) resonate with you, then apply today! Spirit Environmental is an Equal Opportunity Employer. Spirit does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

Job DescriptionDescription: Since 1980, CobbFendley has been committed to providing innovative engineering and surveying solutions with the goal of bettering communities. Our multi-discipline approach allows for the efficient completion of projects through experienced staff who focus on client communication. We are always seeking talented and qualified professionals to enhance our ability to provide clients with exceptional service. Are you ready to Join Our Block and advance your career? At CobbFendley, people are our most valued resource. We offer a(n): • New Hire Program // We understand changing jobs can be intimidating, CobbFendley has established a program geared specifically to the successful onboarding and integration of new hires into the firm, • Development Opportunities // Professional and personal growth through innovative in-house training and collaborative resources, • Compensation + Benefits // Competitive compensation package with comprehensive benefits including 401(k) Matching and Profit-sharing Contributions; Employee Stock Ownership Plan (ESOP); Health, Vision, and Dental Insurance; Short-Term and Long-Term Disability Insurance; Employer Funded and Voluntary Life Insurance; Tuition Reimbursement; and Continuing Education Programs, • Paid Parental Leave // FMLA-eligible employees will receive fully paid leave in the amounts of eight (8) weeks for maternity cases and two (2) weeks for paternity or adoptions cases, • Winter Holiday // Extended office closure from December 25 through January 1 to relax and enjoy the holidays, • Engineering: Bachelor’s degree in a civil or related engineering discipline in which the degree would meet state eligibility requirements for licensing, required. Proficient // General understanding and practical experience; capable of working independently with growing efficiency. 2+ years of professional experience, EIT or PE may be required. • Knowledge of standard engineering and scientific techniques, procedures, and criteria in carrying out tasks. Familiarity with CobbFendley’s QA/QC Management System., • Skills including use of industry-standard computer software for the position (i.e., software such as CADD, HCS, AutoCAD, MicroStation, GIS, and Hydrologic/Hydraulic models)., • Ability to use spreadsheets, word processing, and standard office software. RESPONSIBILITIES 1. Design + Analysis // • Complete intermediate design and analysis tasks using determined software and criteria, under the direction of a Professional Engineer., • Work independently to evaluate, select and apply standard engineering techniques, procedures and criteria, using judgment in making minor adaptations and modifications of assignments., • Escalate unusual problems and work reviewed for application. 2. Compliance + Quality // • Utilize Company QA/QC processes and procedures to review tasks and documents. 3. Communication + Collaboration // • Work with supervisor, project manager, mentors, and various internal personnel to complete assignments within discipline and other disciplines. 4. Training, Learning + Advancement // • Utilize formal education and practical experience in assignments., • Attend internal or external training, as assigned., • Assist with onboarding and entry level training of Graduate Engineer I and II. 5. Client + Internal Satisfaction // • Work with internal clients daily, problem solve minor issues and escalate concerns when needed., • Attend client meetings. 6. Technical // • Apply technical expertise and be able to work with a project team on conventional and unconventional projects, • Perform independent research and adapt to changing priorities, • Work in a collaborative team environment and perform self QA/QC of work, • Adhere to CobbFendley’s safety standards to uphold a safe and efficient environment, • Maintain a professional attitude and fulfill responsibilities with integrity, • Support CobbFendley Project Managers and Engineers with engineering design or coordination tasks for various projects, • Learn and maintain knowledge of client standards, rules, and requirements for planning, construction, and documentation, • Learn and understand equipment and material components of broadband networks, to include both OSP, ISP and Wireless, • Learn to read and interpret plans for various project types, • Learn and understand Utility Coordination and Utility Construction Engineering and Inspection (UCEI)`, • Experience with traffic engineering principles and roadway design standards, • Familiarity with AASHTO and local DOT standards, • Familiarity with Railroad process, requirements and standards, • We Collaborate // with a professional attitude making communication a priority., • We Commit // to maintaining a safe and inclusive work environment, with a focus on accountability. Most work is performed in a professional office environment. Some trips to client offices and outdoor environments for observations will be required. • Seated and Standing Position. Extended periods of sitting and standing in an upright position at a workstation., • Mobility. Movement within the office and job sites, including navigating between floors, workstations, and outdoor environments with potential for uneven surfaces., • Neck Movement. Forward flexion, extension, or lateral rotation of the head and neck while using multiple computer screens., • Repetitive Motion. Repetitive finger movements for operating a computer mouse and typing on a keyboard., • Arm Movement. Extending hands and arms in various directions, such as overhead, below the waist, forward, or laterally., • Object Handling. Raising or lowering objects from one level to another and transporting objects by holding them in the hands, arms, or over the shoulder., • Cognitive Requirements. Selective attention, oral comprehension, oral expression, speech recognition, speech clarity, written comprehension, written expression, problem sensitivity, deductive reasoning, inductive reasoning, number facility, information ordering, category flexibility, flexibility of closure, fluency of ideas, and originality., • Office Conditions. Includes extensive use of electronic devices such as computers, printers, copiers, scanners, plotters, and telephones. Additionally, tasks may involve the use of cutting tools and equipment like rotary paper cutters and plotting devices., • Outdoor Conditions. Includes walking and climbing on uneven surfaces, confined spaces, and exposure to extreme weather conditions (heat and freezing temperatures). Potential exposure to high noise levels and various allergens, including poison ivy, sumac, dust, pollen, and cedar. Potential exposure to wildlife hazards such as animals, insects, and plants., • Safety and Equipment Use. Regular use of personal protective equipment (PPE) is required, along with use of hand and power tools., • This is a full-time position, generally 40 hours per week, however, hours may fluctuate depending on department needs including the use of overtime. This position is eligible for a hybrid schedule once the training period is complete as established by the department. EQUAL EMPLOYMENT OPPORTUNITY Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. • EEO is the Law (English), • EEO is the Law (Spanish), • Pre-Employment Screenings. All offers of employment at CobbFendley are contingent upon the prospective employee passing a drug screening, physical exam (if applicable), and various background verifications (including but not limited to 10-year history of the county, state, federal, and a 5-year history of motor vehicle records). CobbFendley complies with all applicable state and federal laws regarding said screenings. Unless and only to the extent state or federal law limits CobbFendley’s drug-testing requirements for initial hiring, all candidates for employment are subject to pre-employment drug screening verification which may include a panel drug test for use of marijuana and other substances that may be lawful under state law but unlawful under federal law. A positive result may lead to disqualification of candidacy or termination from employment to the extent permitted by law. CobbFendley reserves all rights with respect to its drug-testing, other pre-employment screenings, and workplace policies and procedures., • External Recruiting Agencies. CobbFendley does not and will not accept unsolicited resumes under any circumstances from independent recruiters, recruiting agencies, or similar entities. Recruiting activity on behalf of a candidate does NOT constitute CobbFendley's acceptance of terms and conditions without prior contractual agreements signed by authorized CobbFendley personnel. Unsolicited resumes through any channels including cold calling, emails, applications, social media messaging, etc., will not be reviewed., • Work Authorization + Sponsorship. Cobb, Fendley & Associates, Inc. participates in E-Verify. E-Verify is an Internet-based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA). The E-Verify system uses federal databases to rapidly validate individual identities and work eligibility from the information gathered in the Form I-9. CobbFendley will not sponsor applications of work visas. We understand that this could affect your decision to apply with these conditions in mind. Medication Disclosure: Employees and job applicants shall receive notice of the most common medications, either by brand name, common name, or chemical name, that may alter or affect a drug test. A list of such medications shall be developed by the Agency for Health Care Administration. Contesting Positive Results: An employee or job applicant who receives a positive confirmed drug test result may contest or explain the result to the employer within 14 days after written notification of the positive test result. Responsibility to Notify the Laboratory: The employee or job applicant has the responsibility to notify the testing laboratory of any administrative or civil actions brought pursuant to this section. List of Drugs for Testing: A list of all drugs for which the employer will test can be supplied upon request, described by brand names or common names, as applicable, as well as by chemical names. Right to Consult the Testing Laboratory: Employees and job applicants are notified of their right to consult the testing laboratory for technical information regarding prescription and nonprescription medication.

Job Description Purpose Senior leadership position, responsible for providing strategic direction, technical oversight, and mentorship to the civil engineering discipline. You will play a critical role in shaping the organization's engineering strategies, driving innovation, and ensuring excellence in project execution. Responsibilities Competencies: • Design Review, • Project Implementation, • Project Estimation, • Project Planning, • Project Scoping, • Project Status Reporting, • Perform building sizing and selection, alternative analyses, and other deliverables., • Support the engineering, design, procurement, construction, and commissioning of facilities., • Present engineering and design deliverables to project members, cross-functional teams, senior leadership, external vendors, clients, and other stakeholders., • Plan, forecast, and actualize deliverable progress to support project progress reporting and schedule requirements., • Identify scope changes and estimate impact to effort and schedule., • Supports proposal efforts by evaluating RFP scope, identifying list of deliverables, and estimating effort required, • Work is highly independent., • Ability to work both independently and within a team environment., • Ability to effectively communicate with all levels of the organization and external partners., • Highly motivated and problem-solving attitude., • Strong sense of urgency in responding to constituents., • Strong work ethic and commitment to quality., • Commitment to promoting the reputation of the company through quality of work., • Bachelor's degree in structural engineering, civil engineering, or related field., • Eight or more (8+) years of experience required., • Professional Engineer licensure preferred., • Extensive knowledge and experience in civil engineering principles and practices, particularly in the energy sector., • Advanced proficiency in emerging civil engineering software and tools., • Strong understanding of environmental and sustainability considerations., • Advanced proficiency in geotechnical and structural engineering principles., • In-depth knowledge of industry codes, regulations, and best practices., • Excellent facilitation, communication, and analytical skills - written and verbal., • High level of personal integrity., • Strong relationship capabilities. A career at Bowman means being part of a collaborative, forward-thinking organization where innovation, inclusion, and growth are encouraged at every level. We offer competitive compensation, a supportive work environment, and benefits designed to help our employees succeed. Our Comprehensive Benefits Package Includes: • Medical, dental, vision, life, and disability insurance, • 401(k) retirement savings plan with company match, • Paid time off, sick leave, and paid holidays, • Tuition reimbursement and professional development support, • Discretionary bonuses and other performance-based incentives, • Employee Assistance Program (EAP), wellness initiatives, and employee discounts Job Posted by ApplicantPro

Job DescriptionPurpose of the position The main purpose of this position is leading the introduction (NPI), debugging, and sustaining of complex automated manufacturing system. You will be responsible for the electrical and software stability of production equipment, including Robotics, PLCs, AOI system, and AGVs. You will not only directly troubleshoot controls issue, but also introduce latest technology to minimize downtime and optimize cycle time. Duties and Responsibilities • Analyze the causes of failures: Use professional analysis techniques and tools to conduct a comprehensive and in-depth inspection and analysis of failed products, and determine the root causes of product failures, including design defects, material problems, manufacturing process deviations, environmental factors, etc., • Automatic & Mechanical Equipment Introduction, • Participate early-stage Design for Manufacturability (DFM), equipment evaluation/design/development and DOE verification assembly process., • Push EQ improvement to increase assembly yield and meet customer targets, • Automatic & Mechanical Equipment Installation & Debug, • Push vendor’s equipment setup/installation/debug at NPI. Analyze causes of equipment failures and promote resolution., • Push EQ preventive improvement to reduce downtime & ensure production continuity. Education and work experience • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, or related field., • 3+ years of electrical maintenance experience in manufacturing, background in automotive electronics, semiconductor, or precision assembly industries preferred., • Experience in robotics, AGV, AOI, or related specialized fields is highly preferred., • AI implementation experience in automation environments is preferred. Working conditions This role is primarily based in a fast-paced, high-volume manufacturing facility, requiring daily presence on the production floor to oversee processes, troubleshoot issues, and ensure operational efficiency. May require occasional weekend hours to support production deadlines, emergency repairs, or project implementations. Skills: • Proficient in Mitsubishi/Omron/Siemens PLC programming and commissioning, experience in parameter configuration and troubleshooting of VFDs and servo drives. cRccz52xM2

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced Quality Control Inspector. In this role, you’ll play a key role in ensuring that all products meet our established requirements for reliability and workmanship, as well as other quality control program standards. Job Duties: • Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality, as well as electrical testing as required., • Checking that the assembly or production line adheres to standards and procedures and complies with legal requirements., • Reviewing blueprints, electrical schematics, and specifications to compare to produced goods and generating an inspection report to document all deviations., • Recording inspection results by completing reports, summarizing re-works and wastes, and inputting data into a quality database., • Assist in training the production team on quality control measures to improve product excellence., • Proposing improvements to the production process., • Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements., • Updating job knowledge by engaging in educational opportunities and regular training., • Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs., • Reading and interpreting engineering drawings and electrical schematics., • Comprehension and operation of basic electrical measuring equipment., • Collecting and compiling statistical quality data., • Assisting in the development of test methods and inspection plans., • Determining the causes of product defects and reworks., • Verifying all equipment is calibrated correctly., • Understanding the functionality of basic electrical components for use in industrial electrical cabinets/panels., • Two plus years of experience with electrical inspection and testing preferred, • Experience in an ISO environment preferred, • Experience in Lean/Six sigma preferred, • Associates degree required, • One year of experience with electrical inspection and testing required, in electrical switchgear products and relay panels, • Good written and verbal communication skills required, • Excellent problem-solving and analytical skills required, • Keen attention to detail required, • Basic computer and math skills to calibrate and measure specifications required, • Ability to use measuring devices such as gauges, meters, calipers, and computers required, • In-depth understanding of company standards required, • Up-to-date knowledge of federal and industry standards, UL codes, and best practices required, • Understanding of target market and consumer needs required, • Blueprint and electrical schematic reading capabilities required, • Documentation and reporting skills required, • Teamwork and collaboration required, • Growth mindset with the ability to accept challenges required, • Ability to pass physical, drug, driving, and background check required, • Ability to physically push, pull, and lift 50lbs or more required, • Ability to sit, stand, and walk for four-plus hours at a time required, • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description POSITION SUMMARY: MISTRAS Group, Inc. is seeking certified Level II RT CR/DR Technicians with Rope Access for a full-time position in Baytown, TX. The RT Technician performs NDT operations and evaluates results of NDT tests as certified by Mistras Services written practices to routine NDT methods. Inspects piping, tanks and vessels using the method of Radiography. Requires Level 2 Certification in CR and DR. Rope Access certification required. MISTRAS strives to provide a positive work environment that values excellence in safety and quality, free from discrimination and harassment. Every MISTRAS employee plays a part in our Company’s success and making this a great place to work. We are committed to a work place where all employees are free to raise issues, concerns and questions for the improvement of our operations and work environment. Safety is the overriding priority in everything we do; all duties critical to safety, quality, and environmental protection are carried out in compliance with all requirements and with personal accountability. MAJOR RESPONSIBILITIES/ACTIVITIES: · Train RT assistant, run the film and grade the film per specific procedures directed by the customer. · Perform to set up and calibrate equipment and interpret and evaluate results with respect to applicable codes, standards, and specifications. · Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for on-the-job-training and guidance of trainees and NDT level I personnel. · Organize and report the results of NDT tests. · Generate NDT data, organize data, and report findings. Evaluate data for disposition. · Other duties as assigned MINIMUM REQUIREMENTS: · Requires high school diploma or equivalent, technical school or college credits preferred. · Must possess a current ASNT NDE Level II certificate in the NDT method responsible; and possess adequate knowledge in the NDE method responsible.(RT) · Proven ability to perform a variety of tasks, often changing assignments on short notice. · Proven ability to prioritize and complete work assignments by specific deadlines. · Proven ability to follow and communicate to subordinates precise directions and procedures of the customer on the project. · Must possess a valid driver’s license. · Ability to generate technical data orally, in writing, and electronically as required and appropriate. · 12 months prior NDT experience required. ESSENTIAL PHYSICAL FUNCTIONS: · Frequent lifting up to 30 lbs. This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. MISTRAS strives to provide a positive work environment that values excellence in safety and quality, free from discrimination and harassment. Every MISTRAS employee plays a part in our Company’s success and making this a great place to work. We are committed to a work place where all employees are free to raise issues, concerns and questions for the improvement of our operations and work environment. Safety is the overriding priority in everything we do; all duties critical to safety, quality, and environmental protection are carried out in compliance with all requirements and with personal accountability. Note to Applicants: Smoking is prohibited in all indoor areas of the Company unless designated smoking areas have been established by a particular location in accordance with applicable state and local law. Note to Rhode Island Applicants: The company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the states worker's compensation law. Initial ( if applicable) Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial ( if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Equal Opportunity Employer/Veterans/Disabled: An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. #LI-RS1

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: The Testing Manager is responsible for leading the development, execution, and continuous improvement of product testing and verification processes in support of manufacturing operations. This role ensures that testing methods, equipment, and data systems meet internal requirements, customer specifications, and applicable industry standards. This position provides technical direction to test technicians and test operators, sets the testing strategy for the facility, and uses data-driven analysis to drive reliability improvements, reduce defects, and resolve top product and process issues. The role is responsible for test work instructions, test method development, equipment calibration oversight, and cross-functional collaboration to improve product quality, safety, and performance. This position is directly responsible for product testing and verification processes for all current and future Panelmatic products which includes electrical switchgear products, power distribution products, industrial modular buildings (packaged equipment centers), industrial control and relay panels. Job Duties: Testing Leadership & Team Development • Provide technical leadership, direction, and daily prioritization for test technicians and test operators., • Coach and develop testing personnel to ensure competency, consistency, and adherence to test methods., • Identify training needs and coordinate skill development for test personnel., • Define and implement facility test strategy to support product qualification, production verification, and continuous improvement goals., • Develop, document, and validate test methods, test procedures, and test plans consistent with customer requirements and applicable standards., • Establish test acceptance criteria and test limits based on engineering requirements, risk evaluation, and statistical analysis., • Lead testing system design and continuous improvement, including automation and data collection enhancements., • Ensure all testing activities are executed consistently and accurately, including functional performance, environmental, endurance, and safety testing as required., • Provide troubleshooting support and technical guidance during test failures, anomalies, and unexpected results., • Oversee calibration and verification of test equipment, instruments, and measurement devices in accordance with internal procedures and ISO requirements., • Manage test equipment maintenance schedules and coordinate repairs or replacements., • Use test and production data to identify trends, recurring issues, and leading indicators of failure or defect risk., • Lead root cause analysis and corrective/preventive action (CAPA) related to test failures, product performance concerns, and reliability issues., • Develop dashboards and key performance indicators (KPIs) for test performance, yield, defect modes, and equipment uptime., • Collaborate with engineering, manufacturing, and supply chain teams to implement effective corrective actions and verify results through testing., • Maintain compliance with ISO 9001:2015 requirements applicable to testing operations., • Develop, maintain, and update Standard Operating Procedures (SOPs), Work Instructions (WIs), and test documentation., • Ensure accurate test records, traceability, and documentation control consistent with quality management system requirements., • Support internal and external audits for test-related processes and respond to audit findings as needed., • Partner with design engineering to support product validation, design verification, and qualification testing., • Support manufacturing engineering on process changes, new product introduction (NPI), and validation activities., • Provide technical input to PFMEA, control plans, and risk assessments related to test and verification methods., • Participate in customer and supplier discussions related to test requirements, failures, and corrective actions., • Present test performance metrics, issue investigations, and improvement progress to management and stakeholders. Requirements • Bachelor’s degree in Mechanical, Electrical, Industrial, Manufacturing Engineering or related technical field (or equivalent experience)., • 5+ years of experience in production testing, product validation and reliability testing of power distribution products, industrial control and relay panels and industrial modular buildings (Packaged Equipment Centers)., • Experience supervising, leading, or mentoring technicians or engineering staff., • Strong working knowledge of ISO 9001:2015., • Experience with test method development, documentation, and validation., • Strong analytical and troubleshooting skills with experience in root cause analysis and structured problem-solving methods (8D, 5-Why, Ishikawa)., • Familiarity with statistical and quality tools (SPC, MSA, gage R&R, Cp/Cpk)., • Proficiency with test data systems, dashboards, and reporting tools (Excel, Minitab, Power BI, or equivalent)., • Excellent communication skills and ability to work cross-functionally., • Ability to pass physical, drug, driving, and background check required, • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family), • 401(k) contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job DescriptionDescription: PURPOSE: In accordance with company policies and procedures, the Yellow Jacket assembler provides value within the fast-paced environment of G&H Diversified Mfg., LP (G&H) by supporting the assembly shop process - assembling products in compliance with the company and customer standards. CRITICAL FUNCTIONS: 1. Safely prepare, assemble and repair various types of oilfield products., 2. Clean components and visually inspect for any defects., 3. Package and label products as required., 4. Use air hose, brushes, brooms, rags and other related cleaning tools to maintain a clean work station., 5. Perform other duties as assigned. NON-SPECIFIC FUNCTIONS: 1. Ability to stand, walk and/or move for 6-12 hours per day, 3. Assembly experience in an industrial, warehouse or manufacturing environment is a plus – particularly the oilfield industry, 4. Experience operating a forklift or pallet jack is preferred, but not required, 5. Able to work in a fast-paced environment., 6. Must be available to work overtime and at least 1 Sat./Sun. per week., 7. Reliable transportation to and from work

Job DescriptionHETI is a national and international risk management consulting firm. We primarily service the insurance industry with field risk assessments and industrial hygiene services. We provide these services through our network of highly qualified subcontract consultants. We are looking for consultants with at least 10 years of experience in health & safety, to include general liability insurance involving construction risks, manufacturing risks, oil & gas risks, environmental and fleet management. We are looking for consultants located throughout the country. If you have this background and interesting in learning more, please apply here or submit a resume to . To learn more about HETI visit . Flexible work from home options available.

Job DescriptionLocation: Rosser TX Job Req ID: 16596 Join our amazing team and contribute as a: Equipment Operator ABOUT THE ROLE Runs dozers, loaders, excavators, haul trucks or other types of large equipment used for paving or moving, grading and compacting earth, sand, gravel, stone and/or asphalt materials. Conducts routine daily inspections of equipment and maintains equipment in a clean and safe manner. WHAT YOU'LL ACCOMPLISH • Loads trucks, feeds bins with various aggregate materials, maintains proper quantities of material to be loaded, moves earth or material from one location to another, and performs paving/grading work., • Keeps equipment clean and orderly., • Performs daily inspections on equipment to ensure safe operation., • Ensures that safety, compliance, environmental requirements are followed at all times., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR Education: High School diploma or equivalent Required Work Experience:Minimun of one year of related work experience or equivalent combination of eduaction and experience. Ability to read and write. Excellent driving skills. Additional Requirements: • Valid Driver's license, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Position at Specialized Maintenance Services Specialized Maintenance Services About Us: Specialized Maintenance Services, headquartered in Pasadena, Texas, offers a full line of environmental infrastructure maintenance and industrial cleaning services. Performs municipal sewer cleaning and rehabilit

The HSE Specialist will provide technical and regulatory expertise to ensure compliance with health, safety and environmental regulations by driving continuous improvement of Silver Eagle's HSE policies, standards and programs.

Job DescriptionMain functions: • The Logistics Administrator is responsible for the cost-effective organization of export-import shipments of raw materials, finished goods or other equipment in cooperation with the Materials/Shipping/Warehouse department and staff, • The Logistics Administrator is responsible for checking incoming freight invoices, submitting them for payment, and handling invoice complaints, • Proper use of the equipment used and ensuring its integrity, • Ensuring the integrity and completeness of the goods handled, • Accurate record keeping, • Compliance with the requirements of related laws, especially transportation, occupational safety, fire protection, and environmental protection, • The Logistics Administrator is responsible for maintaining statistical data and performance indicators related to transportationRequirements:, • Degree in field of logistics, • Basic computer skills (MS Excel, Word, Outlook), • Good communication, • Knowledge of shipping processes and terms, • Accurate, precise, demanding work, • Good organizational skills, • Analytical, logical thinking hpJvb7LYou

Job Description The Quality Manager coordinates the activities required to implement and maintain the Mistras Quality Assurance Program. The Quality Manager provides quality training and utilizes quality and continuous improvement tools to assure the effectiveness of the quality assurance program by way of internal and external audits, customer complaints, corrective actions, etc. The candidate must be able to work as a team member in the continuous improvement of production processes and procedures, work with customers to define and document their requirements. MAJOR RESPONSIBILITIES/ACTIVITIES: • Implement, maintain and enhance the Quality Assurance Program., • Manage the Nonconforming Material process and perform data analysis., • Manage the Corrective and Preventive Action process and perform data analysis., • Review contracts, purchase orders, job travelers and work instructions., • Answer customer questions, provide records, records, document customer feedback., • Manage the approval of suppliers, procurement of quality items and services., • Manage the personnel qualification and certification process, maintaining records, working with NDT Level III certifiers., • Contribute to the implementation of new procedures within the company., • Ensure changes to the Quality Assurance Program are documented by either revising the affected documents or reviewing the revised documents. MINIMUM REQUIREMENTS: • Quality related experience with a strong exposure to NDT, • Superior written and verbal communication skills, • Proficiency in Microsoft Office applications, • Group facilitation skills, • The ability to solve problems, • Ability to work with minimal supervision, • The successful candidate must be able to deal with diverse work groups and work overtime as needed. ESSENTIAL PHYSICAL FUNCTIONS: • Frequent lifting up to 30 lbs. Fulltime positions with competitive wages and benefits that include health, dental, vision and 401(k). MISTRAS strives to provide a positive work environment that values excellence in safety and quality, free from discrimination and harassment. Every MISTRAS employee plays a part in our Company’s success and making this a great place to work. We are committed to a work place where all employees are free to raise issues, concerns and questions for the improvement of our operations and work environment. Safety is the overriding priority in everything we do; all duties critical to safety, quality, and environmental protection are carried out in compliance with all requirements and with personal accountability. Note to Applicants: Smoking is prohibited in all indoor areas of the Company unless designated smoking areas have been established by a particular location in accordance with applicable state and local law. Note to Rhode Island Applicants: The company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the states worker's compensation law. Initial ( if applicable) Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial ( if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description Overview Materials & Processes Engineer LOCATION: NASA Johnson Space Center JOB STATUS: Full Time CLEARANCE: Background check & U.S. Citizenship required Are you inspired by human space exploration and passionate about pushing the boundaries of technology to benefit both space missions and life on Earth? Join our diverse and highly collaborative team as we tackle NASA’s deep space exploration challenges. As NASA’s largest engineering solutions provider, we partner with NASA centers across the United States to deliver cutting-edge engineering support for mission-critical programs. We have an exciting opportunity for an Materials & Processes Engineer! RESPONSIBILITES The Materials & Processes Engineer will: • Advise, guide, and provide consultation on requirements for Materials & Processes (M&P) for intravehicular (IVA) and, • extravehicular (EVA) environments, including materials selection, process control and qualification, design for corrosion, • prevention, electrical bonding, flammability, toxic off gassing, and processes specification., • Assist in review and development of hardware, analysis, operation, hazard reviews, anomaly resolution, requirements, • verification, re-flight assessments, and flight acceptance testing., • Formulate presentations and present to program boards as appropriate., • Implement M&P system requirements into hardware design and develop verification and validation plans and, • statements., • Provide input to program/project specifications and ensure appropriate materials requirements are incorporated into all, • program/project specifications at the right level., • Review project/program documentation, specifications, and engineering drawings to ensure M&P requirements are met, • for spaceflight hardware., • Assess whether standard vendor processes meet requirements, and if not, clearly define changes that need to be, • implemented., • Provide vendors with recommendations for qualification and acceptance testing that will properly satisfy verification of, • requirements., • Provide inspection and manufacturing process support for human space flight system., • Other duties as required. REQUIRED EXPERIENCE/SKILLS • Seven (7) or more years of related work experience in Materials and Processes., • Bachelor's degree or higher in Engineering (Metallurgy, Materials Science, Aerospace, Mechanical, Electrical, Chemical,, • Systems)., • Knowledge in materials and processes for space applications, including materials selection (metallic and nonmetallic), design for corrosion prevention and electrical bonding, failure analysis, heat treatment, adhesive bonding, contamination control, etc., • Familiar with metallic and nonmetallic materials specifications, properties, testing., • Knowledge in engineering drawing review for materials and processes., • Overall background on M&P working knowledge for different systems: propulsion, crew compartments, environmental life support systems, thermal, and electronic systems., • Effective written and verbal communication skills with the ability to critically assess manufacturing/material processes and designs., • Willingness to learn and coordinate across other disciplines is highly desired., • Ability to assess and prioritize tasks and identify potential technical risks., • Ability to work collaboratively and independently in a multidisciplinary field., • Strong analytical and problem-solving skills. *This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. PREFERRED EXPERIENCE/ SKILLS • M.S. or Ph.D. in Engineering., • Previous experience in material selection (metallic and nonmetallic) for electrical components, corrosion prevention, flammability prevention, oxygen compatibility, processes qualification, contamination control, development, test, and evaluation for NASA and/or aerospace projects., • Previous experience in directing, guiding, and coordinating a technical team is highly desirable., • Previous experience with human space flight system engineering and integration practices. #LI-AD1 #CJ

Job Description We are seeking a proactive and detail-oriented Quality Engineer Assistant to support our Out of Box Audit (OBA) and manufacturing quality activities. In this role, you will actively contribute to failure analysis, corrective action implementation, inspector certification, and cross-functional quality improvement initiatives within a high-volume production environment. This position is ideal for a technically skilled professional with strong analytical capabilities and hands-on experience in testing systems and quality processes. Key Responsibilities OBA & Inspection Support * Support and oversee daily activities of the OBA (Out of Box Audit) team * Supervise onboarding and certification of OBA inspectors * Regularly evaluate inspector competency levels and deliver training on new processes * Provide direct technical guidance to the OBA team when required Failure Analysis & Corrective Actions * Initiate and lead immediate root cause analysis of OBA and test-related defects * Collaborate closely with Engineering, Test Engineering, and Quality teams * Define the scope of potentially affected products * Propose corrective and preventive actions to eliminate recurrence * Verify effectiveness and ensure no unintended product impact Reporting & Quality Monitoring * Maintain and review OBA defect database accuracy * Prepare and update analysis reports, especially in case of line-stopping issues * Monitor key performance indicators, including: * OBA-related defect ratio * Recurrence rate of defects * Inspector certification status MRB & Test Coordination * Support MRB (Material Review Board) technicians in analyzing production fallout * Ensure appropriate test methods are applied * Align testing methodologies with Test Engineering Cross-Functional Communication * Maintain continuous communication with Quality and Test Engineering * Provide clear updates on analysis results and improvement actions * Escalate issues to the Quality Manager when required Qualifications & Experience * Technical (Technician-level) qualification * Several years of experience with production test systems (e.g., IBM, Lenovo environments preferred) * Strong hands-on knowledge of manufacturing testing processes * Solid understanding of Quality Management Systems (ISO 9001) * Knowledge of Environmental Management Systems (ISO 14001) is an advantage * Basic English language skills Key Competencies * Strong analytical and structured problem-solving skills * Ability to conduct thorough and consistent root cause investigations * Proactive and improvement-driven mindset * High stress tolerance and adaptability in a fast-paced manufacturing environment * Strong administrative skills, including proficiency in Microsoft Office and document control systems * Excellent communication and collaboration skills * Commitment to continuous professional development What We Offer * Opportunity to work in a dynamic manufacturing environment * Cross-functional exposure within Quality and Engineering * Professional development and certification support * Competitive compensation package Powered by JazzHR zQnpCMe26s

Job Description We are seeking a highly skilled and experienced HVAC Sheet Metal Mechanic with a minimum of 5 years of experience in commercial construction. The ideal candidate will be responsible for fabricating, assembling, and installing sheet metal ductwork for HVAC systems in commercial buildings, ensuring high-quality craftsmanship and compliance with industry standards. Key Responsibilities: • Fabricate, assemble, install, and secure sheet metal ductwork for HVAC systems in commercial construction projects., • Measure, cut, and bend sheet metal to precise specifications based on blueprints and job requirements., • Work with various duct materials, including galvanized steel, aluminum, and stainless steel., • Ensure proper sealing, insulation, and support of duct systems to meet industry and safety standards., • Read and interpret blueprints, schematics, and technical drawings to determine project requirements., • Operate hand and power tools, including shears, brakes, welding equipment, and other fabrication tools., • Lead and supervise a small crew of installers, ensuring work is completed efficiently and to quality standards., • Collaborate with other trades to ensure smooth and efficient project completion., • Perform quality control checks to ensure compliance with local building codes and HVAC regulations., • Maintain a safe and organized work environment, adhering to OSHA safety guidelines.Qualifications:, • High school diploma or equivalent., • Minimum of 5 years of experience in HVAC sheet metal duct installation in commercial construction., • Strong knowledge of HVAC systems, ductwork installation techniques, and sheet metal fabrication., • Ability to read and interpret blueprints and technical specifications., • Experience working with various hand and power tools used in sheet metal fabrication., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license., • Ability to pass background check.Preferred Skills:, • Familiarity with local HVAC codes and regulations., • Experience with welding and soldering sheet metal components., • Strong problem-solving and organizational skills., • Effective communication and teamwork abilities. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job Description Outside Sales Representative Job Purpose: The Outside Sales Rep. is pivotal in building and maintaining relationships with our clients. This role is a platform to showcase your B2B sales expertise by developing strategies to grow an existing business book while cold calling and prospecting to add to it. Successful Outside Sales Reps are skilled communicators, and strategic thinkers, and are driven by achieving sales targets. Key Job Responsibilities: · Conduct “active” sales visits for new and existing customers – show and demonstrate new products, explain promotions, and look for stocking opportunities. · Work cooperatively with store/operations personnel to improve our service and resolve any client issues. · Sign up new accounts, grow sales, and achieve individual sales growth plans. · Implement and support the company’s sales promotions. · Schedule appointments with clients and work with their schedules · Complete a minimum of 15 sales meetings with clients in person every day · Fully document all sales calls in our industry-leading CRM during or immediately after each visit. · Evaluate the frequency of client sales calls and establish a consistent pre-set appointment. · Attend meetings, conferences, and association functions as scheduled. Requirements: · 2+ years of B2B sales experience · High school diploma or equivalent · Valid state driver’s license and insurance · Must have your vehicle. · Always maintain a professional appearance Benefits: We offer a competitive compensation plan complete with attractive benefits offerings that include (not limited to) medical, dental, vision, life insurance, 401k, paid time off and opportunities for advancement. Environmental/Occupational Health and Physical Requirements: A typical day includes driving with frequent stops and utilizing an iPad for Call Reports. To perform the duties of this job the employee must have a clean driving record. The occasional heavy lifting of 30 lbs or more may be required. XL Parts and The Parts House a Marubeni Group is an Equal Opportunity Employer. All employment with XL Parts is contingent upon a successful background check and drug screen that meets the Company’s guidelines for employment.

Job DescriptionDescriptionWe are currently seeking a highly motivated Provider Relations Specialist in the Houston area who will be responsible for field and office activities in providing education and supporting the IPA’s provider network. The Provider Relations Specialist will be working with contracted providers on managed care operations and ensure compliance with IPA and Health Plan standards. Our Values • Put Patients First, • Empower Entrepreneurial Provider and Care Teams, • Operate with Integrity & Excellence, • Be Innovative, • Routine visits to providers in assigned territory to develop a trusted relationship and maintain open lines of communication between our organization and providers, • Conduct provider onboarding, orientation, and ongoing educational training throughout the year to ensure providers remain compliant with state, federal regulations and company policies and procedures, • Collaborate with other departments to ensure provider inquiries are resolved in a timely and effective manner, • Develop and implement strategies for retention, growth, and marketing within assigned territories, • Detailed reporting of provider visits, inquiries, trainings, and growth opportunities, • Problem solve and identify ways to address provider issues timely and effectively, • Must be able to travel frequently to assigned service area, • Bachelor’s degree or equivalent years of experience preferred, • 2-3 years experience in provider network scope of services, • Strong understanding of Managed Care Operations, • Minimum of 2 years' customer service, provider services or relevant work experience in a healthcare setting, • Excellent written and verbal communication skills, • Our organization follows a hybrid work structure where the expectation is to work in the field and at home on a weekly basis. Our office is located at 19500 HWY 249, Suite 570 Houston, TX 77070., • This position is a field representative position and requires traveling depending on assignments. or projects. This could be 3-4 times per week and also requires monthly visits to provider offices., • Occasionally required to work overtime and /or during the weekend. Additional Information: The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.

Description Job Title: Environmental Compliance Specialist II Job Summary: Environmental Compliance Specialist II is responsible for performing intermediate-level environmental technical work in support of assigned projects within the EHS business unit. Responsibilities: * Manage assigned environm

Job DescriptionDeutsche Windtechnik is Germany’s largest Independent Service Provider, offering a comprehensive service package for Wind Turbine Generators (WTG) from one single source. With more than 9,000 WTGs under contract and more than 2,200 worldwide employees operating in Europe, the US and Asia, Deutsche Windtechnik sets the bar for Independent Service Provider services. Deutsche Windtechnik came to North America and started operations here in 2018. Headquartered in Houston, TX., it is our goal to set the standard for best-in-class levels of quality, safety, efficiency, and customer service in the US market. Ready to be an important part of our repower team as a Construction Manager? As a Construction Manager, you will be responsible for overseeing the on-site execution of wind energy repower projects from inception to completion. Playing a crucial role in ensuring that all aspects of the project are carried out efficiently, safely, and in accordance with the project plan. This role requires strong leadership skills, technical expertise in wind energy, and a commitment to delivering high-quality results on time and within budget. Are You Looking to: • Work in a fast-paced and dynamic environment to ensure successful project execution from start to finish?, • Provide an on-site leadership presence to manage crews, troubleshoot issues and ensure safety of all personnel?, • Provide daily guidance and supervision to project crews?, • Execute on project plans meeting work scope, objectives, timelines, and resource requirements?, • Monitor project progress and implement adjustments as necessary to ensure on-time completion?, • Allocate resources effectively, including labor, equipment, and materials, to optimize productivity and minimize downtime?, • Prioritize safety and quality by promoting a strong safety culture across all activities including daily crew meetings, safety briefs and work debriefs., • Implement and enforce safety protocols to ensure a safe working environment for all personnel on-site., • Conduct regular safety inspections and walkdowns to identify and mitigate potential hazards and risks., • Oversee quality assurance processes to ensure that workmanship and materials meet project specifications and industry standards., • Coordinate with subcontractors, vendors, and internal teams to ensure seamless execution of project tasks., • Ensure compliance with environmental regulations, safety standards, and prevailing wage/apprenticeship requirements throughout project execution., • Report to the Project Manager on safety, quality, schedule, and cost throughout execution and assist in handover of the project to DWT operations or customer team.What You’ll Need:, • Ten (10) years of wind energy and/or construction experience., • Valid Drivers License, • Demonstrated ability to complete complex, large scale, multi-million-dollar construction projects on schedule and within budget., • Strong management skills, with ability to prioritize and resolve multiple issues while under schedule constraints., • Effective oral and written communication skills., • Ability to read and comprehend construction documents such as Gantt chart schedules, technical drawings, and contract documents., • Proficient with typical computer software (Microsoft Word, Excel, Project, and PowerPoint) 401k with fully vested, generous company match available after 6 months. * Generous PTO, Excellent Medical/Dental/Vision Benefits. * Competitive Compensation. * Personalized and Ongoing Training. DWT CULTURE: What sets us apart is our intense focus on our customers, employees, and culture. Our Mission: To be the most trusted O&M partner to wind farm owners. Our Vision: To empower the Americas’ achievement of 100% renewable energy, one wind turbine at a time. How do we accomplish this? By building a team and a culture with the core values that are: Transparent, Innovative, Guiding (advisor and partner), Efficient and Reliable. We call ourselves TIGERs and we hope you get an opportunity to join us someday! Equal Employment Opportunity Statement Deutsche Windtechnik is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, protected veteran or military status, and other categories protected by federal, state or local law. EEO is the Law Applicants and employees are protected under Federal law from discrimination. Powered by JazzHR 6L0iWEQmPG

Job Description GENERAL DESCRIPTION: Responsible for supervising/coordinating the day to day operations of a manufacturing cell. DUTIES: • Schedule orders through facility, other TA locations, and vendors., • Supervise employees and determine shift hours., • Approve time in UKG., • Obtain all IOA’s, Lead Reports, Waivers, VAM Approval, Russia Legal Exportation document., • Create PR’s for outside services, consumables, inserts, thread protectors, re-calibration, gauges, maintenance, and follow up with the completion and receiving in system., • Order items on Grainger and/or Staples., • Coordinate TPI, order gages Via My VAM., • Perform HSE functions, including Risk Assessment creation and maintenance, observation card tracking, and safety toolbox meetings., • Provide status updates and scheduled dates of completion to Customer., • Quote orders from BHGE Polk Street (Navigation only)., • Perform end of month ASN and PO creation., • Train employees as required., • Create Routers., • Manage the filing system., • Maintain the Planning Tool Excel file., • Coordinate freight and shipments (gages, product, etc)., • Respond to corrective actions., • Participate in audits., • Maintain thread protector inventory file., • Perform stamping, packaging, and other non-machining duties to support shop production. QUALIFICATIONS: • EDUCATION: High School Degree or GED. Education requirements may be satisfied through alternative education and/or previous job experience., • EXPERIENCE: Background in manufacturing industry with exposure to order processes. Familiar with premium threading and thread gaging. Strong Microsoft computer skills (Excel and Word)., • SPECIAL SKILLS: Ability to interact directly with customer representatives., • PHYSICAL REQUIREMENTS: Class III (Vallourec Tube-Alloy Physical & Environmental Requirements), • TRAINING REQUIREMENTS: As detailed in Minimum Training Requirements., • OTHER REQUIRMENTS: Must be flexible regarding shift hours and travel to multiple Vallourec locations.

Job Description Position: Staff Facilities Professional (PCA/Due Diligence Specialist) Location: Houston, Texas Salary: $110,000 - $130,000, depending on licensure and experience We are seeking a Staff Facilities Professional (PCA/Due Diligence Specialist) ready to step into a high-impact technical role with clear advancement potential. You’ll conduct Property Condition Assessments (PCAs) and Facility Condition Assessments (FCAs) that directly influence major real estate and asset management decisions. From office towers to industrial facilities, you’ll evaluate building systems, identify risks, forecast repair needs, and deliver insights through platforms like Quire and Paragon. Why This Role Is Different: • Challenging, Hands-On Work — A 50/50 mix of field and office responsibilities with varied project types., • Autonomy + Collaboration — Lead independent assessments or work alongside environmental and specialty experts., • Fast Career Growth — Strong performance can lead to roles like Project Professional or Practice Lead., • Travel Opportunities — Local projects with occasional overnight trips across Texas and beyond. What You Bring: A broad understanding of structural, MEP, fire safety, and accessibility systems, curiosity for how buildings function, and the ability to translate findings into clear, impactful reports. If you're ready to build technical credibility while shaping real-world investment decisions, this is your next career move. Essential Roles and Responsibilities: • Mid-level Facilities professional responsible for managing and executing routine and sometimes more complex projects., • Works typically on small to medium sized projects., • Plans, schedules, conducts and/or coordinates assessments., • Drafts reports and other client deliverables under the direction of more senior consultants., • Makes recommendations, adaptations and modifications for review and consideration by senior consultants., • Participates on projects of greater complexity within more detailed portfolios., • Performs or oversees contract administration for small-to-large projects., • Follow safety rules, guidelines and standards for all projects. Participate in pre-task planning. Report any safety issues or concerns to management., • Be responsible for maintaining quality standards on all projects. Requirements: • Bachelor’s degree in building science or related building field and up to 6 years’ experience in performing PCAs and/or FCAs. Or, in lieu of a degree, 4-9 years’ related experience., • Valid driver’s license with acceptable violation history., • Proficiency with Microsoft Office products, including Word and Excel. Ability to learn proprietary software applications such as Quire and Paragon., • Experience using tablets and other portable electronic devices., • Able to work remotely from home as well as while traveling. Preferred Certifications/Experience: • Professional registrations (RA, PE) and other related industry certifications (RRO, CxP, LEED AP) are desired, but not required

Job Description Convergentz, a division of Hunton Group in Houston, TX (), has a new and exciting opportunity to join our organization as a Building Automation System (BAS) Controls Installer. The selected candidate will be responsible for installation, diagnoses, and repair of environmental-comfort systems, utilizing knowledge of air conditioning theory, hydronic theory, and modern control techniques. Come work for an industry leader that has been recognized both locally and nationally as one of the Top Places to Work! Responsibilities: • Responsible for installing and servicing products and equipment on assigned projects and ensuring customer satisfaction., • Uses a variety of hand tools and laptop computers, following blueprints or engineering specifications, to install, diagnose, repair, and program HVAC equipment., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and literature supplies., • Maintains equipment by inspecting for signs of wear (maladjustment, miscalibration, malfunction, and drift)., • Documents work by completing paperwork on each job and maintaining files., • Represents company by serving as a direct customer contact., • Supports HVAC Field Technicians by providing field support., • Utilizes project plans to prioritize and schedule work., • Excellent written and oral communication skills., • Strong technical and mathematical aptitude., • Excellent customer service and problem-solving skills., • Knowledge of Microsoft Office products and programming., • Mobility within the office and on construction job sites., • Must have a valid driver's license and good driving record., • High school diploma or equivalent, trade schools or certificates., • 2+ years of installing and servicing/repairing BAS systems and/or electrical systems preferred. Job Posted by ApplicantPro

Job Description The Acoustic Engineer will provide specialized support during the construction and testing phases of facilities requiring compliance with Intelligence Community standards. The selected candidate will work closely with construction teams and security personnel to ensure facilities meet the requirements outlined in ICD/ICS 705. The Acoustic Engineer will conduct audio testing, identify deficiencies, and support remediation and retesting efforts until required standards are achieved. Key Responsibilities • Work with construction firms to ensure compliance with requirements established in ICD/ICS 705., • Conduct audio testing to verify that facilities meet required acoustic and security standards., • Document testing results and technical findings., • Report discrepancies within assigned areas of responsibility to the Site Security Manager (SSM)., • Coordinate with construction teams and project stakeholders to address and resolve deficiencies., • Perform retesting when issues are identified to ensure full compliance with required standards., • Active U.S. Top Secret clearance., • Appropriate certification to conduct acoustic or environmental testing. Examples include:, • Certified Noise Control Engineer (CNCE) from the Institute of Noise Control Engineering, • Certificate of Competence in Environmental Noise Measurement (CCENM), • Certified Industrial Hygienist (CIH), • Certified Vibration Analyst (CVA), • Certified Professional in Acoustics (CPA) from the Acoustical Society of America, • Demonstrated expert understanding of ICD/ICS 705 requirements through experience working on multiple ICD 705 projects., • Experience performing acoustic or audio testing and evaluating results against established standards., • Experience supporting Department of Defense facility construction or secure facility projects., • Strong technical reporting and documentation skills., • Ability to identify, analyze, and resolve compliance issues during facility construction and testing phases.

A leading environmental consulting firm is seeking a Traveling Staff Engineer to engage in geotechnical and civil engineering projects across multiple locations.

Two years or more of construction project estimating experience related to environmental remediation, mine reclamation, decommissioning & demolition, geotechnical, soil and/or earthwork construction projects. Associates or bachelor's degree in Construction Management, Environmental Science, or equiv

GHD's Construction group is hiring! We have an excellent opportunity for a Civil Construction Superintendent to oversee construction job sites throughout the United States. Construction Superintendent-Environmental/Heavy Civil. In this role, you will lead construction projects of small- to large-sca

Cascade Environmental, LLC, and our subsidiaries is an equal opportunity employer.

GFL Environmental - - Responsibilities: Drives a rear-load, split body, curotto, or automated-side load truck along designated routes to collect waste and take to post-collection facilities; Performs daily pre- and post-trip inspections; complete and submit a vehicle condition report at the end of

Job DescriptionSalary: JOB SUMMARY The Lead/Principal Mechanical Engineer will play a key role in planning, coordinating and managing mechanical engineering efforts for primarily natural gas transmission pipeline and facility projects. The successful candidate will work closely with multidisciplinary teams and will interface directly with clients ensuring projects are executed safely, compliantly, and efficiently. The role offers the opportunity of developing and implementing mechanical engineering solutions through an EPCM model. ESSENTIAL FUNCTIONS • Lead and oversee all mechanical engineering activities throughout the project lifecycle, from concept development to execution and closeoutServe as subject matter expert for mechanical systems associated with natural gas pipelines, compressor stations, and M&R facilities., • Develop engineering design specifications, calculations, and drawings, ensuring compliance with applicable codes, standards, and regulatory requirements, • Provide technical guidance and support to junior engineers and designers, fostering a culture of continuous learning and professional development, • Collaborate with project managers and other stakeholders to develop project scopes, schedules, and budgets, and ensure timely delivery of engineering deliverables, • Conduct feasibility studies and risk assessments to identify potential hazards and mitigation measures associated with decommissioning activities, • Review and evaluate vendor proposals and technical documentation to ensure alignment with project requirements and specifications, • Interface with clients, regulatory agencies, and third-party contractors to address technical inquiries, resolve engineering issues, and facilitate project approvals, • Work with multiple disciplines (civil, structural, I&E, etc..) and provide direction to drafting and engineering to develop PFDs, P&IDs, site plans, and piping drawings in order to create a construction set of drawings, • Participate in project meetings, design reviews, and HAZOP/HAZID sessions to ensure effective communication and coordination among project teams, • Monitor project progress and performance metrics, identifying opportunities for optimization and efficiency improvements, • Foster a culture of safety, quality, and environmental stewardship, ensuring that all engineering activities are conducted in accordance with company policies and procedures QUALIFICATIONS • Bachelors degree in mechanical engineering or a related field, • Professional Engineer (PE) with ability to become licensed in multiple states, • Minimum of 15 years of experience in mechanical engineering associated with natural gas high pressure transmission pipelines and associated M&R and compressor stations, • Minimum of 10 years of experience in brownfield/greenfield natural gas compressor station and M&R projects, • Strong leadership and interpersonal skills, with the ability to effectively communicate and collaborate with multidisciplinary teams and stakeholders, • Demonstrated ability to effectively mentor less experienced engineers and designers, • Excellent problem-solving and decision-making abilities, with attention to detail and a focus on delivering high-quality engineering solutions, • Knowledge of industry standards associated with design of oil and gas pipelines and facilities, • Subject expert knowledge of 49 CFR Parts 192, • Strong written skills with experience in preparing project execution plans, design basis memoranda, technical reports, and engineering specifications, • Willingness to travel to project sites as needed to support engineering activities and project execution. *This position will be located in Houston, Texas EnSiteUSA is an Equal Employment Opportunity (EEO) employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, genetics, disability, age or veteran status.

Job Description Convergentz, a division of Hunton Group in Houston, TX, has a new and exciting opportunity for you to join our organization as a Building Automation System (BAS) Controls Technician. Selected candidate will be responsible for installation, diagnosis, and repair of environmental-comfort systems, utilizing knowledge of air conditioning theory, hydronic theory, and modern control techniques. Come work for an industry leader that has been recognized both locally and nationally as one of the Top Places to Work! Responsibilities: • Install and service products and equipment on assigned projects, ensuring customer satisfaction., • Utilize a laptop computer, a variety of hand tools, and follow blueprints or engineering specifications to install, diagnose, repair, and program HVAC equipment., • Identify, analyze, diagnose, and repair instruments and products at a customer's location., • Perform preventive maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepare for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating on-site work, as necessary., • Inspect vehicles by checking vehicle condition and literature supplies., • Maintain equipment by inspecting for signs of wear (maladjustment, miscalibration, malfunction, and drift)., • Document work by completing paperwork on each job and maintaining files., • Represent the company by serving as a direct customer contact., • Support HVAC Field Technicians by providing technical assistance and offering guidance., • Provide training and follow-up training at a customer's site., • Utilize project plans to prioritize and schedule work sequences., • Determine parts to order for repairs and the timeliness of need., • Niagara, Tridium, and/or Distech controls experience preferred., • Excellent written and oral communication skills., • Strong technical and mathematical aptitude., • Excellent customer service skills., • Basic computer and network skills required., • Must have a valid driver's license and good driving record., • Associate's degree or equivalent from a two-year college or technical school in HVAC, Computer Science, or a Computer Science-related field is a plus., • 2-5 years' BAS controls or equivalent combination of education and experience., • 2 years' minimum experience with Microsoft Office products, and programming of building automation systems. Job Posted by ApplicantPro

Job Description Our client, a leader within the renewable energy space, is looking for a rising star to become the EHS leader for their manufacturing facility in the Houston Metro area. This role will play a pivotal role in the designing, implementing and overseeing EHS policies and procedures for high profile facility in the cutting edge of renewable manufacturing. What will this role look like on a week-to-week basis? • Create, implement and oversee EHS policies and programs in line with federal, state, and local regulations. (Including response planning), • Ensure proper procedures and in place and followed for the environment for the facility., • Lead Safety risk assessments, incident investigations, root cause analysis, and corrective action planning., • Collaborate with cross-functional teams to implement continuous improvement initiatives within the EHS space., • Track, analyze, and report key metrics to operational leadership., • A Bachelor's Degree in Environmental Science, Occupational Health and Safety, Engineering or related field., • 5 years of experience in the overseeing EHS programs within Industrial or Energy sectors., • Strong knowledge of Local, state, and federal regulations related to environmental health and safety., • Experience with OSHA Process Safety Management. (PSM) This is an opportunity to join a fast-growing company within the energy space. Apply now if this role sounds like a fit with your career aspirations.

Job DescriptionLocation: Ambrose TX Job Req ID: 16715 Join our amazing team and contribute as a: Dredge Operator ABOUT THE ROLE Runs dozers, loaders, excavators, haul trucks or other types of large equipment used for pavingor moving, grading and compacting earth, sand, gravel, stone and/or asphalt materials.Conducts routine daily inspections of equipment and maintains equipment in a clean and safe manner. WHAT YOU'LL ACCOMPLISH • Loads trucks, feeds bins with various aggregate materials, maintains properquantities of material to be loaded, moves earth or material from one location to another, and performs paving/grading work., • Keeps equipment clean and orderly., • Performs daily inspections on equipment to ensure safe operation., • Ensures that safety, compliance, environmental requirements are followed at all times., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR • Required Education: High School Diploma or equivalent, • Required Work Experience: Minimum of one year of related experience or equivalent combination of education and experience, • Ability to read and write, • Excellent driving skills Additional Requirements: • Valid Driver's License, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Subject to applicable law, employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Description JOB SUMMARY The Environmental, Health & Safety (EHS) Manager is responsible for enterprise‑wide ownership of OSHA compliance, workplace safety, and environmental health programs across Baylor Genetics. This role establishes and enforces consistent safety standards, ensures audit‑ready compliance, and proactively mitigates risk in regulated laboratory and operational environments. The EHS Manager partners cross‑functionally with HR, Facilities, Operations, and Legal to design, implement, and sustain scalable safety programs that protect employees, support business continuity, and align with regulatory and organizational requirements. This role may evolve as organizational needs change. KEY RESPONSIBILITES • Own and enforce OSHA compliance across all applicable sites, ensuring adherence to federal, state, and local regulations., • Design, implement, and maintain enterprise health, safety, and environmental (HSE) policies, programs, and standards., • Lead safety audits, inspections, and incident investigations; identify root causes and implement corrective actions., • Serve as the primary point of contact for OSHA and other regulatory agencies, including inspections and inquiries., • Ensure audit‑ready documentation, reporting, and corrective action tracking across safety and environmental programs., • Partner with HR, Facilities, Operations, and Legal to proactively identify, assess, and mitigate safety and compliance risks., • Lead safety training, drills, and compliance education to promote awareness and accountability across the organization., • Establish consistent safety standards and scalable practices as the company grows and operations expand., • Perform other duties as assigned to support team and organizational objectives. Required • Bachelor’s degree in Environmental Health & Safety, Occupational Safety, Industrial Hygiene, or a related field., • Minimum of 5–7 years of experience in health, safety, and environmental management within a regulated environment (laboratory, healthcare, manufacturing, or similar)., • Demonstrated experience owning and enforcing OSHA compliance, including audits, inspections, and regulatory interactions. Preferred: • Professional certification such as CSP, CIH, CHMM, or equivalent., • Experience supporting laboratory or clinical environments., • Decision Quality – Makes sound, timely decisions grounded in data, risk assessment, and regulatory requirements., • Process Management – Designs and manages processes that ensure consistency, compliance, and continuous improvement., • Drive for Results – Consistently achieves results and follows through on commitments in complex environments., • Managing Through Systems – Establishes frameworks and controls to manage work effectively at scale., • Location: Onsite, • Physical Demands: May require walking through laboratory and operational spaces; ability to stand for extended periods; occasional lifting up to 25 lbs., • Work Environment: Exposure to laboratory and operational environments; adherence to safety protocols required., • Travel Requirements: Limited local or regional travel may be required., • Special Conditions: Must comply with laboratory safety, PPE, and regulatory requirements. EEO STATEMENT Baylor Genetics is proud to be an equal opportunity employer committed to fostering an inclusive and diverse workplace. We welcome and encourage applicants from all backgrounds to apply. We do not discriminate on the basis of race, color, religion, national origin, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, pregnancy, childbirth, or any other status protected by applicable federal, state, or local law. If you need an accommodation during the application process, please contact our Human Resources team.

Job DescriptionLocation: Rosser TX Job Req ID: 16660 Join our amazing team and contribute as a: Equipment Operator- Night Shift ABOUT THE ROLE Runs dozers, loaders, excavators, haul trucks or other types of large equipment used for paving or moving, grading and compacting earth, sand, gravel, stone and/or asphalt materials. Conducts routine daily inspections of equipment and maintains equipment in a clean and safe manner. WHAT YOU'LL ACCOMPLISH • Operate various heavy equipment in order to loads trucks, feeds bins with various aggregate materials, maintain proper quantities of material to be loaded., • Maintain equipment: Keeps equipment clean and orderly., • Safety: Performs daily inspections on equipment to ensure safe operation., • Ensures that safety, compliance, environmental requirements are followed at all times., • Load material into bins, into crusher, into trucks or into plant., • Moves earth or other materials from one location to another., • Performs visual and safety inspection of equipment. May maintain appearance of equipment, proper air pressure in tires, proper fluid levels or perform minor repairs as needed., • Completes are paperwork that may be necessary; assists with other duties required. WHAT WE'RE LOOKING FOR Education: High School diploma or equivalent Required Work Experience:Minimun of one year of related work experience or equivalent combination of eduaction and experience. Ability to read and write. Excellent driving skills. Additional Requirements: • Valid Driver's license, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Description The EHS Technician supports the implementation and maintenance of environmental, health, and safety programs to ensure compliance with regulatory requirements and promote a safe workplace. This role works closely with operations and leadership to identify risks, enforce policies, and drive continuous improvement in safety performance. Key Responsibilities • Provide administrative and operational support to the EHS department, • Conduct routine EHS audits and workplace inspections to ensure compliance with company policies and regulatory requirements, • Document EHS-related findings, non-conformities, and deficiencies; track and follow up on corrective actions, • Support internal and external audit preparation (e.g., ISO, customer audits), including documentation and coordination, • Maintain and organize EHS records and documentation in compliance with regulatory and company requirements, • Accurately report workplace incidents by documenting recordable injuries and illnesses on the OSHA 300 Log, • Monitor and coordinate subcontractor activities to ensure adherence to EHS standards and policies, • Collect, process, and analyze EHS data; prepare reports and track key deadlines and compliance metrics, • High school diploma or equivalent required; additional education in a related field is a plus, • Proficiency in Microsoft Office (Excel, Word, PowerPoint), • Strong communication, organizational, and problem-solving skills, • Certification or training in fire safety or other EHS-related disciplines, • Internal or external auditor certification for ISO 14001:2015 and/or ISO 45001:2018 4Mk45J8CJM

Job DescriptionPurpose of the position Manage the full lifecycle of company assets, including equipment/fixture procurement, customs clearance/importation, and ongoing asset tracking. This role ensures cost-effective sourcing, compliance with import regulations, and optimal utilization of physical assets. Duties and Responsibilities • Procurement & Budgeting: Monthly collect spare parts/consumable demands, develop procurement budgets, create PN in systems, write PR and track ETA, • Prepare and submit accurate customs documentation (e.g., commercial invoices, packing lists) for imported equipment/jigs. Address customs audits, disputes, or duty refund claims proactively., • Inventory Management: Monitor spare parts and consumable stock levels, set reorder points, and conduct regular inventory counts/reconciliations. Optimize inventory turnover and minimize obsolescence/carrying costs., • Conduct regular physical audits, reconcile discrepancies, and generate reports on asset utilization, costs, and lifecycle status., • Manage end-of-life processes, including resale, recycling, or disposal of obsolete assets in compliance with environmental/safety standards., • Collaboration & Documentation: Partner with engineering, production, procurement, and finance teams; maintain SOPs and asset reports. Education and work experience, • Bachelor’s degree in Mechanical/Electrical/Industrial Engineering, Supply Chain Management, or related field. Master’s degree is a plus., • 2+ years of equipment/asset management, procurement, or inventory control experience (manufacturing/industrial preferred)., • Proficiency in ERP systems (SAP/Oracle/NetSuite) and U.S. import/CBP compliance knowledge., • On-site work in a temperature-controlled manufacturing facility with designated cleanroom areas for precision equipment; compliance with ESD (Electrostatic Discharge) protection standards., • May require occasional weekend hours to support production plan, emergency repairs, or project implementation. Skills:, • Proficiency in procurement tools and MS Office., • Strong analytical, negotiation, and problem-solving abilities. mTbUckW49Q