Industrial maintenance jobs in Houston, Texas - Page 10Create job alerts

Job DescriptionSalary: PORT ENGINEER Patriot Maritime is a leading maritime contractor to the U.S. Government, managing and operating vessels. Headquartered in Webster, TX, Patriot is looking for Port Engineers in conjunction with the contract requirements for Military Sealift Command (MSC) and our commercial fleet. An active SECRET level security Clearance or the ability to obtain a SECRET level security clearance is required. Responsibilities & Authorities: * Oversee the safe and economic operation of an assigned group of vessels and cost-effectively manages the assigned * Manage day-to-day vessel-related problems including operational, technical support and safety areas, providing supervision and handling crew-related * Manage daily operations according to the Safety and Quality Management * Monitor the incidents and reports submitted by assigned vessels via the Docmap program and respond with comments, resolutions, corrective actions as necessary. Provide closure to incidents/reports in the SQMS within specified response times. * Periodically review the Class vessel report for deficiencies and relevant date-specific requirements. * Work with assigned vessel personnel to ensure they operate according to the policies, procedures, and performance standards of * Member of the Incident Response Team (IRT) for any vessel casualty they are * Conduct accident or near miss * Maintain familiarity with Companys Employee Injury and Illness Prevention Program (IIPP), as described in SQMS and requirements for completing Vendor/Visitor Familiarization Checklist prior to beginning work on the * Ensure that the Chief Engineer reviews and signs off on all vendor service reports and conducts a personal physical review when possible. The Port Engineer may take on this responsibility for the Chief Engineer when * In consultation with the Chief Engineer, physically inspect the preventive maintenance records in SAMM and manage Planned Maintenance Industrial Assist (PMIA) w/in SAMM. * Maintain awareness of outstanding USCG 835 deficiencies and Port State Control findings, and report current status and progress on any required tracking Qualifications: • Possess a minimum of three years' experience as a Port Engineer having managed and negotiated at least two shipyard dry-docking availabilities with a value greater than three million dollars. Experience gained while employed by a shipyard or while serving active duty in the military may be applicable towards meeting this requirement if the duties and responsibilities of the positions are substantially the same as a Port Engineer. This experience shall demonstrate their ability to effectively manage and negotiate complex projects such as shipyard dry dock overhauls and other types of repairs., • Possess a minimum of four years experience serving aboard Government or commercial ocean-going ships of not less than 4,000 HP as either a Chief Engineer or a First Assistant Engineer. This experience shall demonstrate effective management of maintenance and repair of ocean-going ships. Possess minimum of seven years total experience that is comprised of one or more of the following: • An engineering related degree (e.g. Marine Engineer, Marine Architecture; Mechanical Engineering)., • A Bachelors Degree will count for three years total education experience., • A Masters Degree or higher will count for an additional one year of experience., • Engineering Degree(s) will count for no more than four years total experience., • Experience gained while employed by a shipyard in a management position, • Serving active duty in the military performing duties substantially the same as a Port Engineer, • This experience shall demonstrate their ability to manage and negotiate complex projects such as shipyard dry dock overhauls and other types of repairs on ocean-going ships. Strong communication skills both written and verbal * Good project management skills, including strong decision-making, problem-solving and strategic planning abilities * Strong time management skills * Intermediate knowledge of the MS Office Suite, MS 360 and SharePoint required * An active SECRET level security Clearance or the ability to obtain a SECRET level security clearance is required * The ability to travel up to 15% per year, and up to 50% during shipyard years. Patriot is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Patriot is committed to providing employees with a work environment free of discrimination and harassment without regard to race, color, religion, or belief, national or social or ethnic origin, gender, age, physical, disability, sexual/identity, or orientation.

Job DescriptionHLS Landscape is a leading commercial landscaping company proudly serving property managers, business owners, and developers throughout the Greater Houston area. Specializing in professional lawn care, landscape maintenance, and irrigation solutions, we focus on enhancing the curb appeal and functionality of commercial properties—including office parks, retail centers, industrial sites, and multi-family communities. Known for our reliability, professionalism, and attention to detail, our team is committed to "Lending Nature a Hand" by delivering high-quality results and sustainable outdoor environments. At HLS Landscape, we believe great service starts with a great team—and we’re looking for dedicated individuals who take pride in their work. The Landscape Laborer supports the upkeep and appearance of commercial and municipal properties. This position performs routine lawn care, landscape maintenance, and assists with irrigation system installation, maintenance, and repair. Key Responsibilities: Lawn & Landscape Maintenance • Mow, edge, trim, and blow lawns and landscape areas, • Remove weeds, debris, and litter from the property, • Prune shrubs, small trees, and plant material, • Apply mulch, soil, or fertilizer as needed, • Operate and maintain landscape tools and equipment (mowers, trimmers, blowers, etc.)Irrigation Support, • Assist with installation of irrigation systems (pipe laying, sprinkler heads, timers), • Help identify and repair irrigation system leaks, clogs, or malfunctions, • Ensure water efficiency and system functionalityGeneral Labor Duties, • Load/unload materials, tools, and debris, • Always follow safety procedures, • Communicate with crew leader regarding job progress and any issues, • Previous experience in landscaping, groundskeeping, or irrigation is preferred, but not required, • Ability to work outdoors in varying weather conditions, • Capable of lifting up to 50 lbs. and performing physically demanding tasks, • Basic understanding of hand tools and landscape equipment, • Full-time, typically Monday–Thursday, but occasionally on Fridays if it rains earlier in the week., • Outdoor, physical work in hot, cold, or wet conditions, • Ability to work on construction sites, often in outdoor and adverse weather conditions., • Ability to lift and carry up to 50 lbs and stand for extended periods., • We are an Alcohol and Drug-Free Workplace, • Pre-employment drug tests and background checks will be conducted., • Competitive pay based on experience Powered by JazzHR 1ilPrHXtgN

Job DescriptionCompany Description ABOUT STREAM REALTY PARTNERS Founded in 1996, Stream Realty Partners (Stream) began with a vision. Not one focused on bricks and mortar, but with people at its foundation. Headquartered in Dallas, TX and operating in core markets coast to coast, we complete billions in annual transactions in office, industrial, retail, healthcare, land, and data center properties. With millions of square feet of assignments, Stream is one of the fastest-growing, full-service commercial real estate services organizations in the country. Our team of talented individuals have come together to create our distinct culture, best summarized by our firm’s core values: smart, honest, nice, and passionate. For more information, visit and follow Stream on LinkedIn, Instagram, X and Facebook. IMMEDIATE IMPACT. MEANINGFUL CAREER. At Stream, we know our success begins and ends with our people. It is the reason we work hard to attract and retain the best and brightest talent. From day one, you will be an integral member of our high-caliber, collaborative team. We will empower you to apply your energy, expertise, and creativity to meet our client’s needs while instilling you with unsurpassed market knowledge and development opportunities to succeed. When you join Stream, you won’t simply start a new job—you will build a meaningful and impactful career. Job Description POSITION OVERVIEW The Lead Building Engineer, under general direction, supervises and directs the maintenance, repair, and alteration of buildings and allied equipment; plans and schedules work projects; administers various service contracts; provides technical assistance to the Chief Building Engineer and performs related duties associated with the assigned portfolio as required. PRIMARY RESPONSIBILITIES • Plans, schedules, orders materials, and supervises work on plumbing, heating, air-conditioning, electrical, ventilation, and pumping systems., • Supervises minor construction or building alteration projects., • Keeps associated records and prepares reports., • Participates in the development and administration of maintenance, construction, or service contracts, including requests for proposals, bid conferences, evaluation, selection of bids, and award of contracts., • Coordinates and assists in coordinating building maintenance activities with other departments, divisions, and sections, the public, and with outside agencies., • Inspects buildings for safety hazards, maintenance needs, and disability access requirements., • Prepares plans and specifications for small remodeling, alteration, and construction projects., • Provides time and materials cost estimates., • Analyzes energy usage and costs and originates changes to reduce consumption., • Participates in the determination of maintenance and energy requirements of new buildings., • Involved in preparing the Building Maintenance budget and Capital Improvement Plans, as needed., • Assists with the development and implementation of goals, objectives, policies, procedures, and work standards for the section., • Assists with the development of long-range plans and standards for building maintenance., • Participates in the selection, training, motivation, and evaluation of staff., • Establishes and maintains a cooperative working relationship with employees, members of other departments, other agencies, and the public., • Participates in the safety committee., • Responsible for various maintenance Safety programs such as respiratory protection, fall safety, and confined space. Qualifications, • 5 years of experience in Commercial Building Operations, Property Management, or a related industry required., • Strong verbal and written communication skills; prior experience communicating with tenants and/or vendors in a professional, courteous environment., • Good organizational skills. Attention to detail. Ability to multitask., • Proficiency with Microsoft Excel and Word., • Highly knowledgeable of commercial base building mechanical, electrical, plumbing, fire, and life safety systems, and all related maintenance., • Comply with all applicable codes and regulations, government agencies, and Company directives related to building operations and work safety. Follows OSHA standards for building engineers., • Skill to analyze complex technical and administrative problems, evaluate alternatives, and recommend or adopt effective courses of action., • Ability to interpret plans, specifications, and sketches., • High School Diploma, GED, or trade school diploma required., • EPA Universal Certification required within 90 days of employment., • BOMI SMT/SMT designation preferred., • Work indoors approximately 50% of the time and outdoors approximately 50% of the time., • Use olfactory, auditory, and visual senses., • Ability to lift 50 lbs. or more., • Climb up and down stairs and ladders., • Access remote work areas and confined spaces (i.e., crawl spaces, roofs)., • Use a full range of manual dexterity (i.e., sitting, squatting, bending, kneeling, walking, and lifting). Additional Information #LI-Onsite Stream is an equal-opportunity employer and does not discriminate on the basis of ethnicity, race, religion, sexual orientation, gender identity, age, national origin, disability, military status, or any other reason prohibited by law. Stream Realty Partners offers competitive salaries, bonuses, medical/dental/vision insurance, pharmacy benefits, health savings account, flexible spending accounts, 401(k) plan with company matching, PTO, and holiday pay. Individual compensation packages are based on various factors unique to each candidate, including skill set, experience, qualifications, location, and other job-related reasons. To apply for a position, please visit our website at

Job Description Build a Career That Moves You – Now Hiring Skilled Road Laborers in Houston, TX! Primoris Heavy Civil is seeking Skilled Road Laborers to join our growing team in the Houston area. This is your chance to be part of high-impact infrastructure projects that shape the future of our communities. As a Road Laborer, you’ll take on a variety of physical, hands-on tasks—including lifting, moving materials, and supporting crews across different job sites. You’ll work outdoors in all weather conditions, playing a key role in getting the job done right. From one task to the next, your versatility and strong work ethic will make you a valuable part of the team. If you're reliable, hardworking, and ready to take pride in building something that lasts, Primoris Heavy Civil wants to hear from you. Apply today and start your path to a solid, long-term career! JOB DESCRIPTION Perform various manual duties, usually working in a utility capacity by transferring from one project to another or from one task to another, where demands require the assistance of workmen with varied experience and ability to work without close supervision. QUALIFICATION STANDARDS • Measure distances from grade stakes, drive stakes, stretch tight lines, and salvage lumber grade stacks for reuse., • Level earth to fine-grade specifications using a shovel to support pipe laying, subgrade preparation, and other excavation activities., • Direct laborers in placing concrete into forms., • Erect shoring and braces, and apply sealing compound to pipe joints., • Assist in the installation of pumps and well-points., • Support heavy equipment operators by helping align and move machinery (e.g., cranes, power shovels, backhoes), verifying grades, and signaling adjustments., • Direct truck drivers and scraper operators to dumping locations to maintain grade per the Grading or Dumping Foreman’s instructions., • Work on concrete paving crews, adjusting or adding concrete in front of finishing machines to ensure proper grade., • May serve as a lead worker on labor crews when needed., • Able to lift and carry up to 50 lbs (assistance recommended for heavier loads)., • Work extended hours on foot, including on uneven or rough surfaces., • Location: industrial construction sites and/or fabrication shop, • Mobility Barriers to Access Job Site:, • Uneven ground level, • Obstructed pathways, • Work performed at low and/or high elevations, • Work performed in confined areas, • Climatic/Environmental Conditions at Job Site:, • Predominately outdoor climate, • May be exposed to extreme hot or cold weather, • Excessive humidity, rain, etc., • Various noise levels caused by tools, machinery, equipment, etc., • Competitive compensation paid weekly, • Best-in-class; Medical, Dental, Vision, and LTD/STD, • 401(k) with company match, vested day-one, • Employee Stock Purchase Plan [ESPP], • Tuition Reimbursement, • Pet Coverage "For our Furry Friends", • Legal Assistance Coverage Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit . Primoris Heavy Civil, supported by the bonding capacity and resources of Primoris, has expanded into an even larger role within the heavy civil, infrastructure rehabilitation and transportation industries. Heavy Civil provides highway, port, airfield, rail and marine (intermodal transportation) construction services to private commercial and industrial clients as well as governmental entities such as the Department of Transportation and the US Army Corps of Engineers. Heavy Civil is comprised of six operating units that include North Louisiana Operations, South Louisiana Operations, Texas Operations, HMA Paving Operations, Concrete Paving Operations, and the Infrastructure Rehabilitation Unit. AGENCY STATEMENT We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-IG1

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. DH Pace Company, Inc., is seeking experienced Commercial Door Technicians & Installers for commercial doors and door related products in Houston, TX and the surrounding areas. If you have experience working with commercial doors including roll-up doors, high-speed doors, door hardware, dock equipment or any similarly skilled trades in the commercial construction industry, please apply! Job Responsibilities: • Repair and/or install a wide range of commercial doors and dock hardware, including but not limited to rolling steel doors, high-speed doors, sectional doors and dock levelers/equipment, • Identify opportunities to provide customers with products and services, • Track and maintain job related paperwork and submitting in a timely manner, • Operate in safety conscious manner at all times while performing job duties, • High School Diploma/GED (Preferred), • Prior experience in a similar role or one that required a mechanical aptitude preferred, • Ability to safely lift up to 100 pounds, • Ability to work at heights and use a ladder, • Must possess valid driver's license and good driving record Our benefit offerings include: • Medical, dental, and vision options: Available on the 1st day of the month following your start date!, • Paid time off plan: 13 days accrued annually during your 1st year; 16 days accrued during your 2nd year!, • Paid Holidays: New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, • Floating Holidays: Up to 2 floating holidays per year, • Competitive compensation: Including annual performance evaluations!, • 401k retirement plan: Including an employer match!, • Company paid: Life insurance, short-term disability, & long-term disability, • and more! Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Job Description Cognite operates at the forefront of industrial digitalization, building AI and data solutions that solve some of the world's hardest, highest-impact problems. With unmatched industrial heritage and a comprehensive suite of AI capabilities, including low-code AI agents, Cognite accelerates the digital transformation to drive operational improvements. Our moonshot is bold: unlock $100B in customer value by 2035 and redefine how global industry works. What Cognite is Relentless to achieve We thrive in challenges. We challenge assumptions. We execute with speed and ownership. If you view obstacles as signals to step forward - not step back - you'll feel at home here. Join us in this venture where AI and data meet ingenuity, and together, we forge the path to a smarter, more connected industrial future. How you'll demonstrate Ownership As a Senior Account Executive, Energy, you will win new business with top Oil & Gas/ Energy accounts. You will help customers achieve improved business results through their adoption of Cognite Data Fusion to accelerate their digital transformations. • Develop and execute a territory strategy to drive bookings growth and win new business with leading Energy accounts, • Through active prospecting (cold outreach & social selling) and your personal network of contacts, generate new pipeline and provide "commercial insights" to prospective clients on how Cognite Data Fusion will address the most important areas of their value chain, • Use your executive communications and discovery skills to be your customers' trusted advisor to help them achieve millions of dollars of business benefit in their digital transformations, • Orchestrate complex sales cycles and lead your extended territory team (pre-sales and other key functions) to delight your prospects and customers – using the Command of the Message sales methodology and MEDDPICC, • Leverage strategic partners to accelerate growth in your territory, • Negotiate favorable pricing and business terms with customers by selling value and ROI, • Achieve bookings targets while developing satisfied and referenceable customers, • Accurately forecast monthly and quarterly results; and update Clari & salesforce.com on a regular basis, • Provide timely and insightful input back to other corporate functions, particularly product management and marketing, • Present and demonstrate our solutions in-person and via web-based presentations, • Approximately 40% travel to customer sites and conferencesThe Impact you bring to Cognite, • Bilingual English and Spanish is required, • 7+ years exceeding $1+ million software/ SaaS annual recurring revenue quotas in a direct sales role to the largest Oil and Gas firms (IOCs, Upstream, Midstream, Downstream)., • 10+ years in the oil and gas operations and sales environment., • You are consistently #1 or #2 in sales performance. Experience starting, managing, and closing complex sales cycles from start to finish resulting in multi-million-dollar annual software commitments with new accounts, • Past success with land and expand buying motions and unifying disparate customer stakeholders, such as Asset operations leadership to centralized teams, such as IT, maintenance and reliability, turnarounds, and the office of digital transformation, • Can explain the respective value chains for Oil & Gas - including the key economic drivers; the business, lifecycle of the asset, people, and technical inter-dependencies; and the digitalization opportunity, • Strong understanding of typical customer challenges in oil and gas production optimization and asset performance., • Savvy at helping customers create business cases with quantified ROI to justify new investments, • Highly proficient in outbound prospecting, • Detail oriented, strong relationship-building skills, & a focus on a high level of customer service, • Executive-level written and verbal communication skills, including stellar presentation skills., • You can effectively adapt your communication style from a C-level audience to frontline workers., • Self-starter, able to work in a team environment, and superb time management and prioritization skills, • Familiar with relevant technologies, such as industry equipment and its use in the lifecycle, Data Lakes, Lakehouses, Data Warehouses, Business Intelligence, DataOps, and Machine Learning / Generative AI, • Start-up experience (Series A, B, or C) highly preferred, • Bachelor's degreeEqual OpportunityCognite is committed to creating a diverse and inclusive environment at work and is proud to be an equal opportunity employer. All qualified applicants will receive the same level of consideration for employment.

Job Description Tiger Analytics is looking for experienced Data Scientists to join our fast-growing advanced analytics consulting firm. Our consultants bring deep expertise in Data Science, Machine Learning and AI. We are the trusted analytics partner for multiple Fortune 500 companies, enabling them to generate business value from data. Our business value and leadership has been recognized by various market research firms, including Forrester and Gartner. We are looking for top-notch talent as we continue to build the best global analytics consulting team in the world. We are seeking a Data Scientist with strong downstream refining experience to drive data-driven insights across refinery operations, economics, and reliability. This role partners closely with process engineers, operations, planning, maintenance, and commercial teams to optimize refinery performance using advanced analytics, machine learning, and domain-informed modeling. You’ll work on high-impact problems such as yield optimization, energy efficiency, unit reliability, predictive maintenance, and margin improvement—turning complex refinery data into actionable intelligence. Analytics & Modeling • Develop, validate, and deploy statistical, ML, and optimization models for refining operations, • Build models supporting:, • Unit performance optimization (e.g., CDU/VDU, hydrotreating, cracking), • Energy efficiency and utilities optimization, • Yield and cut-point optimization, • Predictive maintenance and reliability analytics, • Fouling, corrosion, and anomaly detection, • Partner with process engineers, operations, maintenance, and planning teams to translate refinery problems into analytical solutions, • Incorporate first-principles knowledge (mass & energy balances, constraints, process limits) into data models, • Clearly communicate insights to technical and non-technical stakeholders, • Bachelor’s or Master’s degree in Data Science, Chemical Engineering, Applied Mathematics, Statistics, or related field, • 3–8+ years of experience applying data science in downstream refining or closely related process industries, • Strong proficiency in Python or R for data analysis and modeling, • Experience with time-series data and industrial process data, • Solid understanding of refining processes and unit operations, • Experience working with historians (PI), SQL databases, and unstructured data Preferred Qualifications • Advanced degree (MS or PhD) Digital twin or hybrid physics + ML models Cloud platforms (AWS, Azure, GCP)nced Data Scientists. Benefits This position offers an excellent opportunity for significant career development in a fast-growing and challenging entrepreneurial environment with a high degree of individual responsibility. Tiger Analytics provides equal employment opportunities to applicants and employees without regard to race, color, religion, age, sex, sexual orientation, gender identity/expression, pregnancy, national origin, ancestry, marital status, protected veteran status, disability status, or any other basis as protected by federal, state, or local law.

Job DescriptionTesting Technician • Do you love hands-on engineering work that challenges your curiosity and mechanical instincts every single day?, • Are you energized by variety — from building test setups to breaking things (safely) to uncover real-world engineering insights? This isn’t a repetitive lab job - every day is something different! What You’ll Do You’ll work closely with engineers and technical experts to execute testing programs that involve: • Setting up and performing mechanical, thermal, pressure, vibration, and environmental tests across diverse equipment and industries., • Installing and operating sensors, strain gauges, hydraulic circuits, pumps, controllers, and data acquisition systems., • Using hand and power tools as well as industrial equipment such as overhead cranes and forklifts., • Supporting investigative work, documentation, and analysis as part of a collaborative technical team., • Self-starter with strong mechanical aptitude (“the knack”)., • Inquisitive, eager to learn, and willing to grow from hands-on experience., • Takes ownership and sees work through to completion., • Detail-oriented and schedule-responsive, able to juggle multiple tasks., • Calm in chaotic environments and safety-minded in every action., • Strong communicator with the ability to work well with engineers and clients.Required Qualifications, • High school diploma or equivalent (relevant technical education considered)., • 3+ years in an industrial maintenance or lab environment (or equivalent training)., • Mechanical and/or electronic aptitude, including basic troubleshooting ability., • Strong safety awareness and ability to follow procedures., • Ability to work overtime, including occasional nights/weekends, as needed., • Ability to lift 50 lbs regularly; must have a valid driver’s license. We Over Me — We are 1Stress We collaborate intentionally and celebrate shared wins. Unyielding Pursuit of Excellence Right stuff. On time. Every time. Own It — Our Stress We take responsibility and deliver results without compromise. You’ll also love: • Constantly changing, meaningful technical challenges, • Access to world-class testing infrastructure, • A culture that values curiosity, autonomy, and doing things no one else has done, • The satisfaction of seeing your work directly influence real-world engineering decisions

Job DescriptionJob Title: HBM Manual Machinist (Nights)Job Description Join our team at a leading service and repair company specializing in pumps and rotating equipment. We are seeking an experienced HBM Manual Machinist to work night shifts in our shop, where you will recondition various types of pumps based on blueprints and drawings. The role involves working with split case pumps, overhung pumps, horizontal pumps, multistage pumps, and more, using a range of materials including carbon steel, stainless steel, and bronze. Responsibilities • Perform line bores on pumps via Horizontal Boring Mill., • Conduct lathe machining and vertical milling using a Bridgeport machine., • Read and interpret blueprints for pump reconditioning., • Machine and recondition internal pump parts such as shafts, sleeves, rings, impellers, heads, and casings., • Create serrated finishes for flanges, dial pins, and cut diameters on IDs., • Mount faces for bearing houses and create keyways.Essential Skills, • 7+ years experience as a Manual Machinist., • Proficiency in using Horizontal Boring Mill (HBM)., • Ability to read and interpret blueprints., • Expertise in manual machining and working with pump parts., • Experience with micrometers, calipers, and manual lathes.Additional Skills & Qualifications, • Experience with Vertical Turret Lathe (VTL)., • Extensive machining experience with tight tolerances. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Houston,TX 77075. Application Deadline This position is anticipated to close on Apr 2, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: CNC Mill Machinist (1st Shift) Job Description We are seeking a skilled CNC Mill Machinist to join our dynamic machine shop located in Deer Park, TX. Our facility fabricates parts for oil and gas companies, focusing on bearings and seals for rotating equipment. You will work with a range of materials including carbon steel, stainless steel, babbitt, and exotic metals. The role involves CNC milling on both vertical and horizontal machines, utilizing 3, 4, and occasionally 5 axis machines, with a strong emphasis on using Haac controllers. Responsibilities • Operate CNC milling machines to fabricate parts according to specifications., • Work with part dimensions ranging from 1" ID to 36" OD and up to 12" in length., • Utilize vertical and horizontal milling machines with 3, 4, and 5 axis capabilities., • Program CNC machines at the workstation, focusing on mill machining., • Interpret blueprints and machine parts accurately., • Over 10 years of experience in CNC Machining., • Proficiency in mill machining on both vertical and horizontal mills., • Experience with 3/4 Axis machining and CNC programming at the machine., • Familiarity with G code and CAM software such as GibbsCAM and MasterCAM., • Experience with 5 Axis machining is preferred., • Previous experience machining babbitt and working in a competing bearing shop. Join a well-known bearing manufacturer renowned in the industry for its quality and innovation. Enjoy comprehensive benefits from day one, including a 6% 401K match after 60 days. Benefit from 10 paid holidays, a floater PTO day, 2 weeks PTO, and a week of sick pay, all of which are negotiable based on your experience. Additionally, earn quarterly bonuses based on company performance and individual metrics. Work in a clean, air-conditioned environment with a supportive team culture. Work Environment Our medium-sized shop is clean and air-conditioned, maintaining a steady 72°ree;F to prevent material warping. The shop is organized yet busy, with parts in constant motion. The first shift operates Monday to Thursday from 6:00 am to 2:30 pm, Fridays from 6:00 am to Noon, and voluntary half-days on Saturdays, with the potential for mandatory Saturdays if work volume increases. The average workweek is 50 hours. Dress code includes steel-toed boots, jeans, work shirts, and safety glasses. Job Type & Location This is a Contract to Hire position based out of Deer Park, TX. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Deer Park,TX. Application Deadline This position is anticipated to close on Apr 2, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Title: Journeyman Electrician (State Licensed) Location: Houston, TX 77015 Pay Rate: $30+ per hour DOE Schedule: Monday through Friday, 7:00 AM – 4:00 PM, with overtime available Requirements: Journeyman Electrician State License (Apprentice License not valid) Position Overview: Integrity Trade Services is seeking a skilled and reliable Journeyman Electrician to join our team on the east side of Houston. This is a contract-to-hire opportunity offering competitive pay, consistent work, and room for career growth. If you hold an active Texas Department of Licensing and Regulation (TDLR) Journeyman license and are ready for your next challenge, we want to hear from you! Key Responsibilities: • Install, maintain, test, troubleshoot, and repair industrial electrical systems and electronic controls, • Perform preventative maintenance on facility equipment to ensure optimal operation, • Diagnose and repair electrical issues accurately and efficiently, • Maintain detailed records of work performed in compliance with safety and regulatory standards, • Collaborate with the maintenance team to ensure seamless facility operations, • Follow blueprints, wiring diagrams, and technical instructions effectively, • Perform additional duties as assigned by management to support overall project successQualifications & Skills:, • Valid and active TDLR State Journeyman Electrician license required, • Proven experience in industrial electrical systems, including wiring, troubleshooting, and controls, • Strong knowledge of PLC and electronic controls systems, • Ability to read schematics, technical documents, and blueprints, • Excellent problem-solving skills and attention to detail, • Effective communication skills, both written and verbal, • Reliable transportation and the ability to work flexible shifts when needed Interested? Applicants must apply before reaching out. Questions may be directed via text only to Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer We celebrate diversity and are committed to creating an inclusive environment for all applicants, including protected veterans and individuals with disabilities. About Us: Integrity Trade Services’ core philosophy is "Staffing you can trust." We are dedicated to safety, honesty, fairness, and integrity, providing reliable job opportunities that get you to work quickly, safely, and fairly compensated. #HIGH1 #ZR

Summary This position is primarily responsible for troubleshooting and repairing electrical circuits, power distribution, furnace instrumentation and controls mechanical and hydraulic equipment, machine tools, saws, forging and heat treat furnace equipment, closed die forging presses, manipulators & CNC machine mechanical issues with minimal supervision. In addition, this position is responsible for performing upgrade installation of new equipment as well as preventative and corrective maintenance to improve operational uptime and equipment life. The Maintenance Mechanic will perform a variety of maintenance, repair and continuous improvement functions on various plant equipment with limited direction and guidance. Support manufacturing operations in a spirit of teamwork and cooperation. Troubleshoot and resolve issues in a timely fashion. Safely, professionally and efficiently, complete machine repairs and rebuilds per line-up and documentation. We are an Equal Employment Opportunity employer. All qualified applicants will be considered for employment regardless of age, national origin, race, color, disability, religion, sex, sexual orientation, gender identity or expression, or any other characteristic protected under applicable law. Qualified candidates must have experience maintaining and troubleshooting heavy forging presses, manipulators, furnace combustion components, hydraulic and pneumatic systems and components like pumps, compressor, directional, servo and proportional valves, heat exchangers, filters and cooling tower equipment. Basic electrical knowledge for safe working with various industrial equipment is a must. Minimum Requirements and Qualifications Education and Experience • High School diploma or GED., • Electrician License and Hydraulic/Pneumatic / Millwright related certifications are desirable, • Education and/or Experience with an extensive background in electrical power distribution, forge equipment electrical and control troubleshooting and Forging Facility maintenance., • Experience in CNC Machine Repair is a plus., • Must have strong background in mechanical, electrical, hydraulic, pneumatics, CNC and overall machine troubleshooting skills., • Must have 5 years of experience as Maintenance Mechanic Skills and Abilities • Understanding of Safe working, • Ability to read Mechanical equipment drawings, hydraulic, electrical and pneumatic schematic., • Ability to plan and install conduit., • Allen Bradley PLC (SLC 500, Control Logix and RSView) Knowledge, • Fanuc Controls, Ladder Logic and Celos (Mori Seiki) program experience is a plus., • Ability to write routine reports and correspondence., • Ability to read service manuals to determine safe work procedures, • Ability to use CMMS/E-Maint System., • Knowledge of and experience with Microsoft Office., • Fit bearings, align gears and shafts, attach motors, and connect couplings and belts to precise tolerances., • Align and test equipment and make any necessary adjustments., • Perform predictive and operational procedures, • Repair or replace defective parts, • Service and repair hydraulic and pneumatic systems, • May do some minimum welding (a weld that is adequate in size to temporarily hold components in place until it can be completely welded by a registered apprentice welder or a journeyman welder) and fabrication., • Foresee and identify Critical spare needs and works with maintenance planner to ensure availability of parts in time., • Familiarity with government regulations for industry and safe work practices dealing with machine repair. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Troubleshoot and repair presses, manipulators, machine tools, saws and other plant equipment with minimal supervision using safe techniques and schematics. Perform minimum electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Troubleshoot and repair CNC machinery, presses and equipment with minimal supervision using safe techniques and schematics. Perform electrical tasks and incidental work as needed to achieve assigned task. Perform electronic component replacement per familiarity and/or training. Verify equipment as functional and leave the area clean and safe, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Perform mechanical, electrical, hydraulic, pneumatic, and CNC machine repairs as required, • Operate in response to requests by maintenance supervisor or support personnel and set priorities as required to maximize equipment uptime, • Gather and maintain a complete set of required tools, including calipers, dial indicators, hydraulic and pneumatic testing equipment's, electrical meters and other diagnostic and measurement devices., • Utilize diagnostic tools and techniques to define problem areas and assist with resolution., • Utilize measurement devices to hold print tolerances and industry standards while performing machine repairs and assembly., • Participate in preventive and predictive maintenance programs to improve operational uptime and equipment life. Recommend improvements and/or changes to PM systems/tasks when applicable, • Follow designated work instructions as outlined for specific functions. These include, but are not limited to; PM work orders, continuous improvement tasks, new installation line-ups, and repair/refurbish assignments, • Update drawings/prints, suggest spare parts and suitable replacements, and perform various forms of machine repair/rebuild in a professional manner per line-up and schematics, • Follow standard practices and all governmental regulations and laws relating to powered equipment, • Perform other related duties as assigned by immediate supervisor and management, • Uses CMMS/EMaint /MS office system to document maintenance work including work orders/PM's and Inspections., • Prepare and verify Inventory report on periodical basis

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Summary Participate in a variety of technical and non-technical activities in support of the organization's manufacturing engineering needs including product and process design and redesign, sustaining engineering, and equipment and product testing across all manufacturing areas. Essential Duties and Responsibilities may include the following. Other duties may be assigned. \n • Researches and analyzes data such as customer design proposal, specifications, and manuals to determine feasibility or application.\n, • Use broad knowledge of products, processes, and product use in the performance of job duties.\n, • Perform product research, design, development, and testing.\n, • Perform product redesign and enhancement.\n, • Perform production and test equipment design, development, and testing.\n, • Perform sustaining engineering.\n, • Participate in manufacturing process improvement activities.\n, • Implement design or process improvements that originate from manufacturing.\n, • Prepare and present proposals, statements of work, technical reports, etc.\n, • Design new equipment or operational procedures.\n, • Conduct labor operations time studies. \n, • Develop ERP labor and material routers in collaboration with manufacturing and supply chain.\n, • Provide technical support to manufacturing departments.\n, • Provide technical guidance to other personnel in manufacturing areas.\n, • Design, installation, maintenance and evaluation of manufacturing test equipment as well as tools, dies and fixturing.\n, • Manage material issues (internal and external) that arise in manufacturing (MRBs, NCMs, and CAPAs) working closely with QC\n, • Perform day-to-day technical and non-technical activities.\n, • May be assigned to lead and direct manufacturing engineering projects.\n, • Work with Manufacturing, Engineering/CADD to author and release Manufacturing Process/Work Instructions. \n, • May coordinate and direct other members of the engineering staff on assigned manufacturing projects.\n, • Work with SC to assist in procurement selection of raw materials used in in-house fabrications.\n, • Respond to inquiries or complaints from internal production departments, vendors, and customers.\n, • Participate in Company Quality and Safety systems.\n, • Performs all other duties requested, directed, or assigned.\n, • Daily availability to include evenings and weekends when necessary to reach goals and deadlines.\n\n Supervisory Responsibilities This job has no supervisory responsibilities but may provide technical leadership to lower level engineers including carrying out lead responsibilities in accordance with applicable regulations and laws and the organization's policies and procedures. This includes, but is not limited to training employees, planning, assigning, directing work and resolving technically related work problems. Competencies To perform the job successfully, an individual should demonstrate the following competencies: \n • Analytical - Collects and researches data; Uses intuition and experience to complement data.\n, • Design - Generates creative solutions; Uses feedback to modify designs; Applies design principles; Demonstrates attention to detail.\n, • Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully.\n, • Project Management - Communicates changes and progress.\n, • Technical Skills - Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others.\n, • Oral Communication - Listens and gets clarification; Responds well to questions; Participates in meetings. Ability to communicate effectively with all levels of the organization and varying levels of technical knowledge.\n, • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Presents numerical data effectively.\n, • Teamwork - Gives and welcomes feedback; Supports everyone's efforts to succeed.\n, • Business Acumen - Understands business implications of decisions.\n, • Ethics - Treats people with respect;\n, • Organizational Support - Follows policies and procedures; Supports organization's goals and values.\n, • Judgement - Includes appropriate people in decision-making process.\n, • Motivation - Demonstrate persistence and overcomes obstacles.\n, • Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently.\n, • Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions; Follows through commitments.\n, • Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality.\n, • Quantity - Completes work in timely manner; Strives to increase productivity.\n, • Safety and Security - Observes safety and security procedures including using Personal Protective Equipment (PPE) as required and wearing company issued badge when on company property; Reports potentially unsafe conditions; Uses equipment and materials properly.\n, • Adaptability - Adapts to changes in the work environment; Able to deal with frequent change delay, or unexpected events.\n, • Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals.\n, • Initiative - Seeks increased responsibilities; Asks for and offers help when needed.\n, • Innovation - Generates suggestions for improving work.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience: Bachelor's degree (B.S.) from four-year college or university in a related field and 10 years of directly related experience and/or training; or equivalent combination of education and experience. Experience with Automated Manufacturing Processes and Data is a plus. Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply trigonometry, calculus and statistics for design, analysis and problem solving. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills: To perform this job successfully, an individual should be knowledgeable in using software conducive to presenting analytical results, such as charts, graphs, and presentations using Excel, PowerPoint, Access, etc. Knowledge of LabView or Python coding languages are a plus. Other Essential Duties Follows all import/export requirements, consulting with facility import/export personnel as required. Other Skills and Abilities \n • Basic Knowledge of ISO and/or AS9100\n, • Working knowledge of Lean Manufacturing/6 Sigma/Kaizen\n, • Knowledge of specific software (design, analysis, ERP...)\n\n Other Qualifications • Ability to travel domestically approximately 10%.\n Position may require one or more of the following (Site/CBU Specific): U.S. Person for access to ITAR-Controlled Technical Data. ITAR regulations dictate that information and material pertaining to defense and military related technologies may only be shared with US Persons unless authorization from the Department of State is received or a special exemption is used. A "U.S. person" can be A U.S. citizen; A permanent resident who does not work for a foreign company, a foreign government, or a foreign governmental agency/organization; A political asylee; A part of the U.S. government, or A corporation, business, organization, or group that is incorporated in the United States under U.S. law. A foreign person is any person who is not a lawful permanent resident of the US and includes foreign governments and organizations. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws.

Job Description JOB TITLE: Journeyman Industrial Electrician - Texas Electrical License - TDLR Base Pay $38.98 per hour – NW Houston SUMMARY: Plans layout, installs, troubleshooting and repair, wiring, electrical fixtures, apparatus, and control equipment by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include but not limited to the following: Plans new or modified installations to minimize waste of materials, provide access for future maintenance, avoid unsightly hazardous, and unreliable wiring, consistent with specifications and local electrical codes. Follows Electrical and Company Safety procedures, guidelines and work instructions. Prepares sketches showing the location of wiring and equipment and follows Electrical drawings or blueprints. Measures, cuts, bends, threads, assembles, and installs electrical conduit. Connects wiring to lighting fixtures, power equipment, and machinery. Installs motors, control panels and distribution apparatus such as switches, relays, and circuit-breaker panels in line with applicable Electrical codes and Engineering guidelines. Performs Preventative and Predictive Maintenance tasks on assigned equipment. Tests continuity of circuits to ensure electrical compatibility and safety of components with testing instruments. Observes functionality of installed equipment or systems to detect hazards and need for adjustments, relocation, and replacement. Participates in shop organization under the Plant Lean Manufacturing initiative. Troubleshoots and repairs faulty equipment or systems. Discusses layouts, assembly procedures, problems with Supervision, Engineering and can draw sketches to clarify design details and functional criteria of electronic or electrical circuitry. Assembles experimental circuitry (breadboard) or complete prototype model. Recommends changes in circuitry or installation specifications to simplify assembly and maintenance. Sets up standard test apparatus to conduct functional, operational, environmental, and live tests for evaluating the performance and reliability of prototype or production models. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are a representative of the minimum acceptable job qualifications: EDUCATION and/or EXPERIENCE: Two-year degree in Electrical Technology or related field or Journeyman Electrical License and a minimum of two years of industrial field experience. Minimum of five years of direct work experience in an industrial setup will substitute for the above requirement. Interpret documents such as Schematics, Wiring, Ladder diagrams, Operating and Maintenance instructions, and procedure manuals. Experience working with electronics and solid-state devices such drives, programmable automation controllers, radio controls and metering equipment. Numerical Control or CNC experience is desired but not a requirement. Ability to speak effectively to other employees and vendors. LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules and manuals, operating and maintenance instructions, and procedure manuals. Ability to speak effectively to other employees and vendors. MATHMATICAL SKILLS: Ability to work with mathematical concepts and fundamentals of plane, solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Company DescriptionRecruiting & StaffingRecruiting & Staffing

Company Overview: If a culture of excellence, innovation and ownership is what you're searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve's position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This is a First Shift Opportunity: 6:00am-2:30pm Monday- Friday. Overtime required when necessary. Responsibilities: • Operating a CNC Horizontal Boring Mill (HBM) - Operate basic equipment and machines and carry out routine tasks., • Operations Management - Carry out operational tasks by following established processes., • Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance., • Health, Safety and Environment - Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others., • Operational Compliance - Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct., • Precision Equipment Utilization - Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges., • Instructions and Drawings - Ability to read and interpret blueprints and geometric tolerances., • Internal Communications - Exchange information with people by having courteous interactions with them., • Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives., • 3-5 years of machining experience in a manufacturing or repair environment operating CNC Horizontal Boring Mill (HBM), • Line Boring, • Verbal Communication - Uses clear and effective verbal communication skills to express ideas and request actions., • Planning and Organizing - Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives., • Health and Safety - Applies elementary concepts to manage and apply safe systems of work., • Medical, Dental & Vision Insurance (including FSA and HSA options), • Life Insurance + Supplemental Life, Child, Spousal, and AD&D Insurance, • Short- and Long-Term Disability, • Retirement Planning, 401(k) plan, & Financial Wellness Resources, • Educational Assistance Program Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Req ID : R-18728 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to [email protected]. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Job DescriptionDiversified Sourcing Solutions is seeking a bilingual (English / Spanish) Equipment Technicians who enjoy solving problems both hands-on and through data analysis. This role blends equipment testing and troubleshooting with performance data review and remote customer support. The ideal candidate is mechanically inclined, comfortable working with data, and confident supporting customers to keep their systems operating efficiently.Key ResponsibilitiesEquipment Testing & Troubleshooting • Set up, test, and evaluate spray-foam proportioning systems, pumps, and related equipment, • Perform mechanical, hydraulic, electrical, and basic software troubleshooting, • Assist with prototype testing and quality assurance evaluations, • Identify performance issues and recommend corrective actionsData Review & Analysis, • Review equipment logs, pressure and temperature readings, and ratio performance data, • Use Microsoft Excel and internal tools to analyze trends, detect anomalies, and identify maintenance needs, • Document findings and collaborate with engineering teams to improve equipment reliabilityCustomer Support, • Provide remote technical support to customers via phone and email in both English and Spanish, • Guide users through troubleshooting steps to diagnose and resolve equipment issues, • Maintain accurate records of customer interactions, issues, and resolutionsQualificationsRequired, • Fluent in English and Spanish (spoken and written), • Experience with mechanical, electrical, or fluid-handling systems (spray-foam, HVAC, automotive, industrial equipment, or similar), • Proficiency with Microsoft Excel and comfort interpreting data and trend reports, • Strong problem-solving, communication, and organizational skills, • Ability to work independently and collaborate with cross-functional teamsPreferred, • Background in manufacturing, field service, or quality assurance, • Familiarity with data logging systems, PLCs, or industrial control systemsWork Environment, • Based at our testing and support facility in Houston, TX, • Monday–Friday schedule with occasional after-hours customer support

Dixon Valve - 6525 Homestead Road - Responsibilities: Maintains operational ability of equipment through routine maintenance checklists and activities; Maintains industrial machinery and equipment using hoists, lift trucks, hand and power tools; Moves, assembles, installs or dismantles machinery; In

Alsco Uniforms - 8020 Blankenship Drive - Responsibilities: Installs, repairs and performs preventative maintenance on industrial processing equipment; Troubleshoots electrical issues; Responds to daily maintenance requests in a timely fashion to minimize equipment downtime; Provides emergency/unsch

Sligan Plastics - - Responsibilities: Trouble shoot equipment; Perform PMs without supervision; Read and understand electrical schematics and hydraulic schematics; Follow GMP and housekeeping standards; Report injuries or accidents to supervisor.

Aerotek - - Responsibilities: Perform electrical and mechanical repairs on production equipment. Conduct routine preventative maintenance and log activities in the CMMS. Work with industrial sewers, presses, conveying systems, compressing/rolling machines, and foam cutters.

Cintas Corporation - - Responsibilities: Assist with repairing, maintaining, installing and troubleshooting industrial equipment, systems and components including washers, dryers, steam tunnels, conveyor systems and boilers; Assist with performing preventive/predictive maintenance; Resolve safety c

Classification: Non-Exempt Job Summary: The Maintenance Worker is responsible for regular preventative maintenance of large industrial textile processing equipment, as well as facility maintenance. Assists the Maintenance Technician and/or Chief Engineer as required. This position reports to the Chief Engineer. Essential Functions: • Performs basic maintenance duties, including monitoring oil levels and performing regular preventative maintenance of grease fittings, lint traps, shaker screen barrels, limited electrical troubleshooting., • Relies on instructions and pre-established guidelines to perform the functions of the job., • Relies on limited experience and judgment to plan and accomplish goals., • A certain degree of creativity and latitude is required., • Assists in problem resolution in an effort to minimize equipment downtime., • Looks for opportunities to continually improve maintenance processes, • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations., • Demonstrate adequate mechanical aptitude., • Proficient in the proper use of power and hand tools., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management and team member skills., • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: • High school graduate or equivalency preferred. Typical Physical Activity: • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. Our full-time employees may enjoy: • 401 K Plan with Company Match, • Medical, Dental, Vision, and FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Employee Assistance Program (EAP), • Career Advancement, • Development Opportunities For a general description of benefits that are being offered for this position, please visit ___. About Us: We are Alsco Uniforms. We've been committed to our customers since 1889, proudly pioneering the uniform and linen rental industry and growing into a global leader serving over 350,000 customers across 13 countries. We provide exceptional service and create solutions that strengthen our customers' operations. At Alsco, our diverse workforce drives performance, innovation, and exceptional service. We're looking for individuals who want to build a rewarding career while making a meaningful impact. Explore how Alsco helps you build a successful career with competitive compensation, benefits, and ongoing opportunities for growth. Join our team and build your career with Alsco Uniforms! Alsco Uniforms is an Equal Employment Opportunity Employer Alsco Uniforms considers candidates for employment without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, or gender identity. Additionally, we do not discriminate based on genetic information, military status, protected veteran status, or other classification protected by applicable federal, state, or local law. Specifically, protected veteran status includes status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active-duty wartime or campaign badge veteran. Thank You for Considering Alsco Uniforms Thank you for your interest in joining Alsco Uniforms. Employment is contingent upon successful completion of background check and safety-sensitive drug screening. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

GENERAL SUMMARY The Manufacturing Engineer is responsible for providing manufacturing engineering support to product design, product improvement, cost reduction and daily operations as assigned; providing the machines, tooling and processes necessary for that support; and for providing timely coordinated implementation of short- and long-term goals. PRINCIPAL DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS) • Evaluates and improves upon existing manufacturing processes. Assists supervisors and production team members in resolving manufacturing process problems., • Produce and maintain support documentation to control processes and costs while maintaining quality. Includes: Manufacturing processes, time studies, CNC programming, tooling, tool design, machinery or related equipment as needed., • Plans and implements process engineering activities for new product development and current product support. Facilitates smooth transition of projects from Engineering to Manufacturing, including analyzing and planning workflow, space requirements, equipment layout, work instructions and preventative maintenance procedures., • Justify new or replacement tooling, machines and equipment. Prepare capital authorization requests and manage installation and start-up., • Act as the first point of contact for shop floor manufacturing issues., • Act as training person for specialized processes and machine operators., • Assist and support in environmental, health and safety programs and requirements., • Assist and support plant and facility maintenance., • Provide Make vs. Buy analysis and standard cost estimates., • Create and maintain routings., • Create and maintain shop floor work instructions., • Create rework orders for the shop floor., • Proficient at utilizing the latest SolidWorks 3D solid modeling software for fixture and tooling design., • Proficient at utilizing the latest Mastercam CAM software for CNC program creation and verification., • Bachelor's degree (or equivalent) in manufacturing engineering, mechanical engineering, or industrial engineering., • Must be able to communicate and work effectively with vendors and team members at all levels., • Physical demands are typical of an office position including extended periods of sitting, extensive use of a personal computer and telephone., • Position requires movement around the facilities., • Factory floor support is imperative., • Occasional handling of material and components. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. QUALITY Quality encompasses all aspects of DeZURIK, Inc.'s business, and every team member shares the responsibility to prevent the occurrence of any nonconformity relating to product, process and the quality system. All team members have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions. SALARY AND BENEFITS DeZURIK offers a competitive base salary in the $75,577 to $94,472 range, based on experience and qualifications, along with annual bonus opportunities tied to performance. Beyond pay, our market-leading benefits are designed to support your wellbeing. These include medical, dental, vision, and life insurance, as well as short- and long-term disability coverage. DeZURIK also provides a health savings account with company match, a retirement plan for employer contributions through Vanguard, and access to the Granite Assistance Fund for support when it's needed most. We value time for rest and personal growth, offering generous paid time off, including volunteer time off and paid holidays. Please note: Sponsorship is not available for this role. #LI-JW1

This job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential. Cultural Beliefs • One LSC, • Student Focused, • Own It, • Foster Belonging, • Cultivate Community Lone Star College has been recognized in multiple categories. As faculty members of Lone Star College, we strive to create a nation of world citizenry in our students. In that pursuit, we model ways of thinking and being that incorporate diversity, equality, and equity. Our culture, then, requires the possession of transcendent qualities that, while immeasurable, are evident in global citizens. We are compassionate with our students, colleagues, and ourselves. We are innovative in the pursuit of learning. Ultimately, we create a culture where learning thrives, people are safe, and we mirror the qualities of world citizenry. Lone Star College faculty are dedicated to four qualities of excellence: • Student Invested, • Content Expert, • Pedagogically Excellent Lone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College. Lone Star College-System Office employees are based at one of two System Office locations; The Woodlands and University Park. Both are the site for multiple administrative departments and system-wide training programs. Location address is 20515 SH 249 (SH 249 and Louetta Road) Houston, Texas 77070-2607. PURPOSE AND SCOPE: It is the responsibility of the teaching Trainers to provide the learning activities and support that will lead to the achievement of the course objectives and contribute to the educational environment of the college and the community. Primary responsibilities are to plan, develop and teach courses within the curriculum in a manner that facilitates student learning. Part-time CC Trainers are hired in a part-time capacity, contingent upon the needs of the College and its' corporate clients. In partnership with our clients, you will be the direct key to creating a successful outcome in the education of our clients' employee populations in learning new mechanical and/or electrical and/or fluid power skills as indicated below. ESSENTIAL JOB FUNCTIONS: • Delivers training in one or more of the following programs: Mechanical - or Electrical- or Fluid Power (Hydraulics and Pneumatics) programs using related materials to support training objectives, • Reviews course content and objectives, • Conducts training sessions and provides feedback for evaluating the effectiveness of training activities, • Maintains professional relationships with students, colleagues and the community, • Works with Corporate College to continuously improve instructional quality by reviewing and utilizing innovative methodologies, techniques, and delivery methods, • Evaluates students by a variety of means to measure their progress in achieving course objectives and inform them in a timely manner of their progress, • Ability to work with Corporate College staff and plant personnel to meet varying training schedules and course feedback, • Must have excellent interpersonal, communication and organizational skills; must have demonstrated problem-solving ability, • Ability to communicate, understand and meet needs of less technical customers, • Must demonstrate instructional skills, • Ability to work occasional evenings and weekends, • Ability to manage complex projects demonstrating a high degree of judgment, tact and discretion The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work. WORK SCHEDULE & CONDITIONS: • PC workstation running on a LAN in a Microsoft Windows environment, calculator, phone and other general office equipment, • Internal and external contacts as needed to carry out the functions of the position, • Work is performed in a climate-controlled office or lab environment with minimal exposure to safety hazards, • Travel to the LSC locations and to external classroom/lab locations will be required, • Hours will vary depending on class time, • High school diploma or higher and at least 3 years of verified, paid work experience in industry as an electrical/electronics and/or mechanical maintenance and/or fluid systems specialist, • Work experience and significant hands-on and classroom training experience in one or more of the following areas:, • Mechanical systems (e.g., manufacturing, assembly, maintenance), • Industrial electrical/electronic systems (e.g., automation, programmable logic controllers, motor controls), • Technical math, • Blueprint and/or schematic reading, • Precision measurement, • Occupational and equipment safety By joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment, excellent work/life balance, tuition waiver, participation in a tax deferred retirement plan, professional development opportunities and more. Go to the Job Search page, click on 'My Activities' at the top of the page. Under My Cover Letters and Attachments you will click on 'Add Attachment.' Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume. If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less. ALL APPLICANTS MUST APPLY ONLINE ONLY We will not accept application material received via fax, email, mail, or hand delivered. Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC). If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview. Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States. More information on the E-Verify program is available at ___. Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

Location(s): Houston, TX, US, 77029 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 67151 Maintenance Mechanic 3rd Class Job Description Job Title: Maintenance Mechanic 3rd - Class Department: Maintenance Reports to: Maintenance Leader Pay: $32.15 Supervises: N/A FLSA Status: Non-Exempt Date: 9/18/23 SUMMARY The purpose of the 3rd class mechanic is to perform as professional, highly skilled and exceptionally competent maintenance person. Participates in teams to develop and implement solutions. JOB DUTIES AND RESPONSIBILITIES PRINCIPAL DUTIES AND RESPONSIBILITIES: Plant and Environmental Safety • ___Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment., • Take personal ownership to work safely and hold other team members to the same high standards of safety, • Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc., • Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal., • Complies with all plant rules and safety regulations., • Performs cleanup duties at workstations and/or equipment/machinery., • Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec., • Inspect vehicles before use and throughout shift, keeping all equipment clean and operational. TPM • Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S)., • Continues to use TPM methodology to gain a better understanding of the equipment., • Identifies and participates proactively in learning opportunities and develops expertise in those areas., • Utilizes Focus Improvement tools to problem solve., • Works to achieve zero injuries, zero defects and zero losses., • During PM days, uses time effectively to bring equipment to optimal condition for zero losses., • Maintain DM and Step Boards. Maintenance • Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process., • Fluent in the language of the plant., • Computer literacy - email, simple spreadsheet, word doc., • Safe rigging procedures., • Forklift operation, licensed - will provide certification., • PLC basics -- Ability to identify key components of a PLC and describe their function, • Troubleshooting basics, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method"., • Process 101 - Basic concepts of what it takes to consistently manufacture shingles. Critical product characteristics, key process variables, customer needs etc., • Business 101 - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus., • Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks., • Must work safely and follow all documented and "common sense" safety policies and procedures., • Read, understand, and analyze blueprints and other technical data references., • Expert use of hand and power tools., • Inspects plant equipment to identify potential problems prior to breakdown occurrences., • Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion., • Follows all environmental compliance polices & programs., • Work as instructed with outside contractors. Mechanical • Ability to properly precision align belt, gear or direct coupled shafts using proper tools to specified tolerances., • Understanding of lubrication principles and bearing tolerances and basic bearing "physics"-I.E. how does it work in terms of need for extreme care, keeping clean, etc., • Hydraulic systems understanding - identify and describe the function of hydraulic components, • Same as above for compressed air and steam, (where applicable) systems., • Understanding of pump basics and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques., • Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing., • Ability to read air and power fluid schematics., • Basic welding for all; structural and piping welding for at least one craft per plant., • Pipefitting - alignment, flange, threading., • Basic electrical component "how they work" understanding: solenoids, motors, heaters, contacts, and photoeyes., • Ultrasonic rotating equipment troubleshooting. Electrical • Basic industrial electrical code., • Capability to read schematics and P&ID drawings., • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC, DC and Servo drive system (basics)., • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment., • Burner system understanding, troubleshooting and properly tuning Other • ___Demonstrate the ability to effectively communicate., • Support the training and development of colleagues., • Demonstrates flexibility to changing priorities as business needs dictate., • Identifies and participates proactively in learning opportunities, and develops expertise in those areas., • Follows standard operating procedures and processes., • Can and is willing to make decisions. Knows the chain of command to get support., • Regular Attendance on site and the ability to rotate varying shifts., • All other duties as assigned or needed. ___JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold the following skills and abilities: • ___Demonstrated desire to impact safety, • Must be able to work independently or in a team atmosphere with minimal direct supervision, • Demonstrated mechanical aptitude and the ability to troubleshoot, • High attention to detail, • Demonstrated ability to multi-task, • Basic mathematics skills, • Able to effectively communicate (read, write, speak, understand) English, • Basic Electrical, • Basic PLC, • Basic Hydraulic, • Basic Pneumatics, • Basic Blueprint & Schematic reading, • Proficient in SAP PM Module ___COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: • Work with a computer to perform basic data entry, • Demonstrate basic computer skills such as ___Microsoft Outlook, IVC and SAP. EDUCATION AND/OR EXPERIENCE • High School Diploma or GED Equivalent required., • Manufacturing or process related experience preferred., • Preferably five (5) years in a related maintenance trade or occupation that involved electrical, hydraulic machinery and equipment in a manufacturing environment., • Able to demonstrate trouble-shooting techniques and have a basic understanding of blueprints., • Basic ability and knowledge of welding practices and hydraulic circuitry., • Advanced understanding of electrical circuitry., • Basic PLC knowledge., • Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form., • Flair for working with large industrial machines., • Must be able to work independently or in a team atmosphere with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • ___Must remain drug free, • Exposure to dust/dirt/fumes/fiberglass, • Ability to work in wet environments: including head and feet, • Industrial manufacturing environment with extreme temperature variation, • Exposure to sounds or noise levels that maybe uncomfortable (hearing protection is provided), • Ability to wear applicable PPE for up to 12 hours, • Ability to distinguish colors and shading, • Ability to become certified to operate a forklift, • Prolonged sitting, standing, or walking for 8 - 12 hour shifts, • Bending and twisting; repetitive movements, • Able to do repetitive hand, arm, leg movements for up to 12 hours, • Must be able to squat, bend at the waist and knees freely, • Be able to climb up to three floors or stairs, use full upper body movement for process; stand up to 12 hours with breaks, • Ability to work from heights, • Lift, push and pull 40lbs.repetitively, • ___Handle, control, feed, or feel objects, tools or product, • Must be able to work flexible rotating shift schedules - mandatory overtime as required This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Nearest Major Market: Houston

GENERAL SUMMARY The Manufacturing Engineering Supervisor is responsible for providing leadership to the Manufacturing Engineering team to advance manufacturing by reducing cost, improving quality, expanding safety, and increasing on-time delivery. This position functions as a working supervisor and is expected to both lead the team and directly perform hands-on manufacturing engineering activities as the business needs require. PRINCIPAL DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS) • Leading project teams to acquire, integrate and implement technologies into manufacturing and production processes., • Ensure appropriate procedures and support documentation are maintained properly and efficiently. Includes: Manufacturing processes, NC programming, tooling, and tool design documentation., • Manages capital equipment requisitions, ensuring competitive cost, process fulfillment, and quality needs are satisfied., • Supports new product development to ensure manufacturability, cost, and quality from design concept to production release., • Manages shop floor tooling and facility operating expenses., • Assist and support plant and facility maintenance and improvements., • Serve as a player-coach by executing hands-on manufacturing engineering tasks in addition to supervisory responsibilities., • Bachelor's degree (or equivalent) in Manufacturing Engineering, Mechanical Engineering, or Industrial Engineering preferred., • Strong organizational and interpersonal skills are a necessity., • Ability to provide and give work direction within the department and communicate with all aspects/areas of the company., • Attention to detail, with a high degree of accuracy., • General Office computer skills. Ability to understand and navigate in Excel - ability to analyze large amounts of data and combine data from multiple sources., • Physical demands are typical of an office position including extended periods of sitting, extensive use of a personal computer and telephone., • Position requires movement around the facilities. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. QUALITY Quality encompasses all aspects of DeZURIK, Inc.'s business, and every team member shares the responsibility to prevent the occurrence of any nonconformity relating to product, process, and the quality system. All team members have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions. SALARY AND BENEFITS DeZURIK offers a competitive base salary in the $86,158 to $107,698 range, based on experience and qualifications, along with annual bonus opportunities tied to performance. Beyond pay, our market-leading benefits are designed to support your wellbeing. These include medical, dental, vision, and life insurance, as well as short- and long-term disability coverage. DeZURIK also provides a health savings account with company match, a retirement plan for employer contributions through Vanguard, and access to the Granite Assistance Fund for support when it's needed most. We value time for rest and personal growth, offering generous paid time off, including volunteer time off and paid holidays. Please note: Sponsorship is not available for this role. #LI-JW1

The Electrical Test Technician is expected to inspect, test, troubleshoot, service, repair and maintain various types of power distribution system equipment. • Provide industry-best customer service- always exceed the customer's expectations, • Assume emergency on-call duties and if required, respond to customer emergencies in a timely manner, • Contribute to a safe work environment; adhere to all safety polices both those outlined in the company safety manual as well as customer safety guidelines, • Exhibit a positive collaborative attitude, • Inspect, test, troubleshoot, service, repair and maintain low, medium, high voltage electrical system equipment, • Setup and perform electrical tests on the following equipment:, • Transformers - power factor, TTR, winding resistance, insulation resistance, excitation and oil analysis, • MV and HV conductors - VLF Tan Delta, Partial Discharge, VLF Withstand, DC Hipot Withstan, • Circuit Breakers - primary injection, secondary injection, contact resistance, insulation resistance, • Automatic Transfer Switch - troubleshooting, • Switchgear - Low, Medium and High voltage testing and maintenance, • Relays - electromechanical and solid-state testing, • Perform required/assigned testing, • Properly check in and check out test equipment utilizing the company provided system reporting any damaged or unusable equipment, • Treat all company provided assets as if they were your own, • Prepare and submit daily reports outlining job progress/completion, • Review and submit all company administrative paperwork in a timely manner, • Be a continuous learner, • Complete all assigned company training in a timely manner, • Willingness to work flexible schedule including overtime, evening, weekends, holidays and night hours as required, • Drive daily, locally/regionally and be available for periodic overnight travel, • Must be fluent in reading, writing, and speaking English., • Possess strong written and verbal communication skills, • High school diploma or GED equivalent required, • Pass a pre-employment drug screen, background check, and reference check, • Maintain a current valid driver's license and good driving record, • Eligibility to work in the US without need for employer sponsored VISA (work permit), • Prolonged periods (10 hour) of standing, lifting, and carrying materials, • Must be able to perform physical labor including reaching, twisting, bending, grasping, pushing, pulling, climbing, kneeling, crouching, stooping, and lifting., • Must be able to perform work outdoors in all types of weather., • Must be able to lift and carry up to 75 pounds at a time., • Must have good hand/eye coordination, • Must be in good physical condition and have good motor skills., • Ability and willingness to wear Arc-Flash suit, fall protection harness, safety boots, safety glasses, hearing protection, hard hats, respirator, and additional personal protective equipment., • Physically able to work with heavy tools and equipment at heights., • Ability to use hand tools and power tools., • Two-year vocational or post-high school program in electrical trades or industrial electricity., • Associate degree in technology from an accredited 2-year technical college or similar military experience/training, • Experience performing medium voltage splicing and terminations, • Experience with installation of switchgear and transformers, • Ability to read one-line and control diagrams, • Computer skills including email, internet, data entry and Microsoft Office products, • NETA certification (Level 3), • 3 plus years' experience working on commercial and industrial electrical projects, • 3 plus years' hands-on experience utilizing industrial electrical test equipment, • OSHA 10, OSHA 30, NFPA 70-E training, • Commercial Driver's License (CDL) preferred

This job carries with it the obligation to uphold the Mission of Lone Star College (LSC) in carrying out the duties of the position. A commitment to positive interpersonal behaviors, professional communication, integrity, leadership, stewardship, respect and accountability to LSC students and employees is essential. Cultural Beliefs • One LSC, • Student Focused, • Own It, • Foster Belonging, • Cultivate Community Lone Star College has been recognized in multiple categories. As faculty members of Lone Star College, we strive to create a nation of world citizenry in our students. In that pursuit, we model ways of thinking and being that incorporate diversity, equality, and equity. Our culture, then, requires the possession of transcendent qualities that, while immeasurable, are evident in global citizens. We are compassionate with our students, colleagues, and ourselves. We are innovative in the pursuit of learning. Ultimately, we create a culture where learning thrives, people are safe, and we mirror the qualities of world citizenry. Lone Star College faculty are dedicated to four qualities of excellence: • Student Invested, • Content Expert, • Pedagogically Excellent Lone Star College offers high-quality, low-cost academic transfer and career training education to 80,000+ students each semester. LSC has been named a 2023 Great Colleges to Work For institution by the Chronicle of Higher Education. LSC consists of eight colleges, seven centers, eight Workforce Centers of Excellence and Lone Star Corporate College. Lone Star College-System Office employees are based at one of two System Office locations; The Woodlands and University Park. Both are the site for multiple administrative departments and system-wide training programs. Location address is 20515 SH 249 (SH 249 and Louetta Road) Houston, Texas 77070-2607. PURPOSE AND SCOPE: It is the responsibility of the CC Trainers to provide the learning activities and support that will lead to the achievement of the course objectives and contribute to the educational environment of the department, college, and the community. The Trainer member's role encompasses the general areas of learning facilitation and, when not instructing, may include taking part in other related functions, such as curriculum development, development and growth of the department, professional development, and institutional service. Primary responsibilities are to plan, develop and teach courses within the curriculum in a manner that facilitates student learning for employees of client companies. ESSENTIAL JOB FUNCTIONS: • Teaches resulting in two or more of the following programs: Mechanical - or Electrical- or Fluid Power (Hydraulics and Pneumatics) programs using related materials to support training objectives, such as electrical testing and maintenance, electrical trouble shooting and Programmable Logic Controllers, • Works with Instructional Designer to develop client specialized Mechanical - or Electrical- or Fluid Power (Hydraulics and Pneumatics) courses to meet individual Corporate College client needs, • Delivers training curriculum programs for external clients, • Reviews, evaluates, and revises program curricula and practices to assure compliance with professional standards, state-mandated guidelines, and requirements of business, industry, and higher education. Maintains current knowledge of Mechanical, Electrical or Fluid Power standards, • Develops and uses a syllabus for each course or laboratory within college and departmental guidelines, • When not instructing, position may be responsible for curriculum development, development of the department, professional development, and institutional service as determined by department leadership. Serves as Mechanical, Electrical or Fluid Power consultant to sales team. May serve on grant committees, and works with college leadership on projects, • Mastery of course content, • Ability to work with Corporate College staff and client personnel to meet varying training schedules and course feedback, • Must have excellent interpersonal, communication and organizational skills, • Ability to communicate, understand and meet needs of clients, • Must demonstrate instructional skills, • Ability to work occasional evenings and weekends The work is sedentary. Typically, the employee sits comfortably to do the work. However, there may be some walking; standing; bending; carrying of light items, such as papers, books, or small parts; or driving an automobile. No special physical demands are required to perform the work. WORK SCHEDULE AND CONDITIONS: • Regularly drive to offsite, client locations as assigned within training contract and directed by executive director, • High school diploma or higher and at least 3 years of verified, paid work experience in industry as an electrical/electronics, and/or mechanical maintenance, and/or fluid systems specialist, • Work experience and significant hands-on experience in one or more of the following areas:, • Mechanical systems (e.g., manufacturing, assembly, maintenance), • Industrial electrical/electronic systems (e.g., automation, programmable logic controllers, motor controls), • Technical math, • Blueprint and/or schematic reading, • Precision measurement, • Occupational and equipment safety, • Associate's degree or higher in a related field, • Experience in adapting training techniques to students of both technical and nontechnical backgrounds, • Bilingual (English/Spanish) Your salary offer would fall in that range is determined by your related experience and education. Should you receive an offer of employment from Lone Star College, the resume submitted in the application process will be utilized to calculate your salary offer. The information outlined below will provide the Office of Human Resources everything needed to determine an accurate starting salary. Your resume should provide a complete picture of your work experience. The resume should include the following information for each position listed: • Length of time (specific months and years) of employment, • If the position was full time or part time, • If the position was paid or unpaid, • Level of degree completed including date earned. By joining our top-notch institution, you will enjoy being a part of an organization that offers a supportive, collegial work environment and excellent work/life balance. This includes a full comprehensive and competitive benefits package, wellness programs, professional development opportunities, sabbatical opportunities and more. Go to the Job Search page, click on 'My Activities' at the top of the page. Under My Cover Letters and Attachments you will click on 'Add Attachment.' Please be sure to put the Job ID# in the title once you name your file for cover letters only, unless you attached your cover letter with your resume. If you are applying for an Instructional position (i.e. Faculty, Adjunct Faculty, Instructor), please ensure you include the following to be considered: Resume/CV, Cover Letter, Teaching Philosophy, and unofficial transcripts. You must limit your file name for any attachment to 40 characters or less. ALL APPLICANTS MUST APPLY ONLINE ONLY We will not accept application material received via fax, email, mail, or hand delivered. Postings for part-time and adjunct positions are active for the academic year. By selecting the option to receive notifications on your profile, you will begin receiving electronic communication regarding new opportunities with Lone Star College (LSC). If selected for an interview, a recruiter will contact you by phone, or email to schedule an interview. Lone Star College participates in the E-Verify program, under which Lone Star College provides the federal government with information from each new employee's Form I-9 to confirm that the employee is authorized to work in the United States. More information on the E-Verify program is available at ___. Lone Star College is an EEO Employer. All positions are subject to a criminal background check.

Classification: Non-Exempt Job Summary: The Custodian is responsible for general maintenance and cleanliness of equipment, facilities and grounds. This position is also referred to as Janitor. Performs other tasks as required. Our full-time employees enjoy: • 401K Plan with Company Match, • Medical, Dental, Vision, FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Career Advancement, • Learning & Development Opportunities For a general description of benefits that are being offered for this position, please visit ___. Essential Functions: • Performs heavy cleaning duties such as clean plant equipment using compressed air and other methods., • Scrub, sanitize, vacuum, sweep and mop., • Dispose of trash, clean up spills, replace air fresheners, change out light bulbs, lock doors, paint, maintain water coolers, prepare facilities for events such as meetings or banquets., • Clean offices, bathrooms, break rooms and other areas., • Move furniture, supplies, textiles or equipment within departments or into storage and assist other departments with other tasks., • Apply insecticides and fumigants, trim shrubbery and perform other outside maintenance, clear walkways of snow or leaves., • Participate in Safety programs such as committees or emergency contingency, use Personal Protective Equipment as needed, notify supervision of repair needs, spills, safety concerns or hazardous situations., • Keep records of maintenance, monitor cleaning supplies, restock supplies in bathrooms, break rooms and other areas., • Operate a powered industrial truck to move, transfer, load and unload., • Continuously meet efficiency and safety standards for the position., • Follow instructions as directed by supervision., • Keep work area neat and clean., • Perform other tasks as required. Additional Functions: • Work in other production positions as needed. Qualifications: • Recognize colors and sizes, count and sort accurately., • In some locations, be able and certified to safely operate a powered industrial truck., • Basic knowledge of cleaning products and procedures or willing to learn., • Ability to prioritize multiple tasks and work effectively with a team., • Work independently, comprehend and follow written or verbal direction. Education: • No requirement. Typical Physical Activity: • Physical Demands consist of standing, walking, bending, reaching, twisting, working in cramped areas, reaching overhead, pushing, pulling, grasping, lifting up to 90 lbs., carrying up to 50 lbs., and stooping. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, in general offices, outside grounds, variations in temperature, odors, humidity, lint and dust. Travel Requirements: • none., • Physical requirements consist of being able to meet the physical demands for the entire shift. About Us: We are Alsco Uniforms. We've been committed to our customers since 1889, proudly pioneering the uniform and linen rental industry and growing into a global leader serving over 350,000 customers across 13 countries. We provide exceptional service and create solutions that strengthen our customers' operations. At Alsco, our diverse workforce drives performance, innovation, and exceptional service. We're looking for individuals who want to build a rewarding career while making a meaningful impact. Explore how Alsco helps you build a successful career with competitive compensation, benefits, and ongoing opportunities for growth. Join our team and build your career with Alsco Uniforms! Alsco Uniforms is an Equal Employment Opportunity Employer Alsco Uniforms considers candidates for employment without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, or gender identity. Additionally, we do not discriminate based on genetic information, military status, protected veteran status, or other classification protected by applicable federal, state, or local law. Specifically, protected veteran status includes status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active-duty wartime or campaign badge veteran. Thank You for Considering Alsco Uniforms Thank you for your interest in joining Alsco Uniforms. Employment is contingent upon successful completion of background and safety sensitive drug screening. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Classification: Non-Exempt Job Summary: The Route Relief/Utility RSR supports the Service Department in its objectives to meet our customers needs through up-selling/cross-selling and providing superior customer service. Main duties are to cover routes and perform service related tasks as required. Reports to the District Manager. Essential Functions: • Perform all responsibilities of a Route Sales Representative and related tasks., • Learn and support all routes. Run routes as needed for holidays, vacations or other vacancies., • When not on a route, assist in rush deliveries, renewals, audits, training and any other tasks assigned by supervision., • Solicit new customers, up-sell/cross-sell/sample all lines of service or product and ensure a profitable product mix., • Actively participate in promotions and contests, training and audits., • Follow company policies/procedures regarding new customers, managing customer needs and all aspects of service., • Ensure customer loyalty and outstanding customer service. Build relationships, communicate openly, educate customers and proactively resolve concerns in cooperation with supervision., • Safely operate a delivery vehicle on each trip, following all applicable laws and company policy. Maintain vehicle cleanliness and perform regular vehicle inspections., • Handle and process customer payments. Keep route paperwork current., • Ensure timely and correct deliveries of complete textile loads, pick up soiled textiles and maintain proper inventories in accounts. Service items such as facility maintenance products., • Monitor and report competitive activity. Keep service agreements current and renewed., • Return from route and off load soiled textiles in the receiving area of facility., • Accurately prepare route paperwork and follow check-in procedures., • Follow written and verbal instructions and perform other tasks as directed by supervision. Additional Functions: • Support other service personnel as required by supervision. Qualifications: • Have and maintain a valid Drivers License, CDL when applicable and be 21 years or older., • Maintain a driving record free of chargeable accidents, speeding, safety or other violations., • Demonstrate excellent skills in the operation of vehicles and verifiable minimum one year experience of safe and successful driving., • Demonstrate excellent skills in customer service and route sales., • Excellent verbal/written communication skills in English, comprehend and follow direction and good time management skills and team player., • Recognize colors, sizes and types of product and count, add and subtract accurately. Education: • High School graduation or similar experience. Qualified drivers license. Travel Requirements: • Daily, by delivery vehicle within a route. Typical Environmental Conditions: • Operating vehicles on public roads, in and out of customer locations, loading areas of a typical industrial laundry facility, Service Center or depot., • Indoor and outdoor areas of a typical industrial facility. Typical Physical Activity: • Physical Demands - sitting, grasping, driving stooping, kneeling, reaching overhead, moving carts up to 500 lbs., lifting up to 75 lbs, standing, walking, writing, speaking, hearing. Our full-time employees may enjoy: • 401 K Plan with Company Match, • Medical, Dental, Vision, and FSA/HSA, • Life Insurance, Disability Insurance, • Vacation, Sick Time, Holidays, • Choice of Global Cash Card or Direct Deposit, • Employee Assistance Program (EAP), • Career Advancement, • Development Opportunities For a general description of benefits that are being offered for this position, please visit ___. About Us: We are Alsco Uniforms. We've been committed to our customers since 1889, proudly pioneering the uniform and linen rental industry and growing into a global leader serving over 350,000 customers across 13 countries. We provide exceptional service and create solutions that strengthen our customers' operations. At Alsco, our diverse workforce drives performance, innovation, and exceptional service. We're looking for individuals who want to build a rewarding career while making a meaningful impact. Explore how Alsco helps you build a successful career with competitive compensation, benefits, and ongoing opportunities for growth. Join our team and build your career with Alsco Uniforms! Alsco Uniforms is an Equal Employment Opportunity Employer Alsco Uniforms considers candidates for employment without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, or gender identity. Additionally, we do not discriminate based on genetic information, military status, protected veteran status, or other classification protected by applicable federal, state, or local law. Specifically, protected veteran status includes status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active-duty wartime or campaign badge veteran. Thank You for Considering Alsco Uniforms Thank you for your interest in joining Alsco Uniforms. Employment is contingent upon successful completion of background and safety-sensitive drug screening. Revised: 04/29/22 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Job Description MUST HAVE AT LEAST 2 YEARS OF EXPERIENCE. MUST HAVE A CLASS A CDL. MUST BE ABLE TO PASS A DRUG SCREEN. MUST BE WILLING TO WORK HARD AND BE RESPECTFUL. 30% PER LOAD PAY Job Type: Full-time HIRING ASAP!! Pay: 55cents a mile • Perform job duties in a safe manner compliant with policies, procedures and practices., • MUST be able to operate a manual and automatic transmission, • Comply with DOT (Department of Transportation), EPA (Environmental Protection Agency), industry, state and local government regulations., • Safely drive, maneuver and operate commercial vehicles and equipment., • Inspect work order and shipping paperwork, verify for accuracy., • Load plastic/resin onto truck; ensure correct equipment is present to safely perform job., • Perform jobs tasks which may include: Safely use manual tools (rack, water hoses) to remove materials; prepare, properly attached and operate hoses on vacuum trucks; safely operate., • Inspect equipment (including pre-check and post-check equipment protocols) including lights, hoses, equipment connections, and pumps; ensure deficiencies are correct equipment or replaced to ensure safety and compliance., • Maintain, complete and submit appropriate paper work and reports timely as required including: travel logs, time sheets and, maintenance documents., • Maintain a safe, neat and clean work environment, this includes: work area and equipment., • Model professional behavior at all times; report to work as scheduled, on time and prepared to work., • Comply with appearance and dress policies to ensure a safe and professional work environment., • Wear personnel protective equipment (PPE) as defined by policy, regulations, practice, and customer, • Work flexible schedule that may include nights, weekends and holidays., • Work effectively in team environment and provide support and assistance. Requirements: • Valid Driver’s License., • CDL Class A, • Effective communication skills, both written and verbal., • Read and understand instructions/signs/directions ., • Pass drug screen, physical and safety sensitive background check., • Wear required personnel protective equipment including; gloves, respirators, safety glasses, foot protection and hard hat, • Sit periodically and for extended periods of time; climb ladders and stairs, reach below knees and above shoulders; kneel and crawl to access work areas., • Stand, walk, bend, stoop; reach forward and grasp for periods of time., • Balance while walking on wet and slick surfaces, metal grates, narrow platforms, and uneven surfaces., • Work in loud, cold, hot, wet and dry environments; both indoors and outdoors in inclement weather., • Enter and exit industrial vehicles and equipment without assistance.

Job Description Working within a team environment, the Repair Technician is responsible for the assembly and disassembly of gas turbine engine components using planning, tooling, workmanship standards and general instructions. Completes necessary documents as directed by the Job Process Controller and Planning Engineer. Conducts visual inspection of components for damage, defects, and wear both prior to and following welding procedures. DESCRIPTION: • Performs disassembly and assembly of gas turbine components and modules., • Inspects individual engine modules & components and assesses condition., • Inspect and clean engine piece parts and assess condition. Create quality welds according to blueprints (weld symbols)., • Responsible for the proper packaging, identifying, and moving of all finished products to the proper location., • Ensure all equipment is properly set up and used in a safe manner and that all safety devices are in use., • Operate forklift, if required and trained., • Operate air tools for blending and/or grinding welds to contour., • Interpret dimension and tolerance symbols identified on prints and verify conformance of work pieces to specifications required by prints, specifications, or procedures., • Performs first piece inspections as well as all subsequent inspections as required by RMF standards., • Monitor equipment and request maintenance when required., • Perform maintenance and repair as required. Required: • A minimum of two (2) years of experience in a manufacturing or warehouse facility, • Experience with the operation of overhead cranes and forklifts., • Possess mechanical aptitude., • Exceptional attention to detail., • Proficient in the use of hand and power tools for successful job performance., • Ability to work in a team environment and effectively communicate., • Ability to follow directions and procedures., • 2-5 years of Industrial Gas Turbine Repair experience, • 2-5 years of Welding experience operating GTAW/TIG welding machines., • Understanding of the abrasive media blast process. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential functions. • This position is performed in a shop environment., • Frequent standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling., • Moving, carrying, lifting, objects in excess of 50 lbs., • Working extended hours and standing for extended periods of time., • Work in both cold and hot climates., • Work in or near industrial hazards. Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices.

Job Description The specific pay rate and level will depend on the successful candidate’s qualifications, prior experience and location. “A Day in the Life” The Regional Environment, Health & Safety (EHS) Manager is an upper-level role responsible for the strategic direction, implementation, and continuous improvement of EHS programs across multiple facilities within an assigned area of responsibility. This role partners closely with regional and site leadership to build a proactive safety culture, ensure regulatory compliance, and reduce risk while supporting operational goals. The Regional EHS Manager serves as a subject matter expert and trusted advisor, capable of not just doing safety, but influencing others to assume ownership and accountability for safety. The role requires strong leadership skills, data-driven decision-making, and the ability to lead through others to achieve goals. “What You’ll Do” • Provide regional leadership for EHS programs across multiple locations, ensuring alignment with corporate policies, standards, and objectives., • Serve as a key advisor to regional and site leadership teams on EHS risks, performance, and improvement opportunities., • Drive a consistent, sustainable safety culture focused on employee engagement, accountability, and continuous improvement., • Assess EHS programs to identify gaps, trends, and risks; partner with leadership to implement corrective and preventive actions., • Lead the development, deployment, and refinement of regional EHS initiatives, best practices, and standardized processes., • Validate and continuously improve compliance with Injury and Illness Prevention Programs and other corporate EHS requirements., • Ensure compliance with applicable federal, state, and local EHS regulations, including OSHA, EPA, DOT, NFPA, and ANSI., • Monitor regulatory changes and provide timely guidance to leadership and operations to maintain compliance., • Oversee incident, injury, near-miss, and environmental event investigations; ensure root cause analysis is completed and corrective actions are effective and sustainable., • Lead and oversee regional safety audits, inspections, and field observations to verify compliance and effectiveness of controls., • Review audit findings, track corrective actions, and hold leadership accountable for timely closure., • Analyze regional EHS performance data to identify trends and develop actionable insights using company metrics and KPIs., • Ensure company EHS training programs are implemented across the region., • Support and guide site-level safety committees and employee engagement initiatives., • Promote safe work practices through coaching, mentoring, and leadership presence., • Provide oversight and guidance for contractor safety performance within the region., • Ensure environmental compliance, including waste management, chemical management and SDS maintenance., • Support permitting, inspections, and interactions with health, safety and environmental regulatory entities. “Must Haves” • Strong working knowledge of EHS regulations and management systems., • Demonstrated ability to influence leaders and drive change without direct authority., • Proven experience building and sustaining a strong safety culture across multiple locations., • Excellent communication skills with the ability to engage employees at all organizational levels., • Strong analytical skills with the ability to interpret data, identify trends, and drive solutions., • Effective organizational and time management skills in a fast-paced, multi-site environment., • Computer skills with proficiency navigating Microsoft Office applications (Word, Excel, PowerPoint, Outlook, Teams, Copilot)., • Minimum of 5-8 years of dedicated EHS experience, including multi-site or regional responsibility., • Demonstrated experience leading EHS programs and influencing operational leadership., • Valid driver’s license “Nice to Haves” • EHS experience working in both General Industry and Construction is strongly preferred., • Bachelor’s degree in safety, Environmental Science, Industrial Hygiene, or a related field is desired., • Professional certifications (e.g., CSP, CIH) are a plus., • Bilingual (English/Spanish) preferred but not required. Special Conditions • Ability to navigate industrial environments to include climbing stairs or ladders, and the ability to balance, stoop, kneel, or crouch as needed., • Must be able to occasionally lift up to 50 pounds., • Regional travel required, potentially up to 30%. “Perks” • It’s a great place to work where you are given the space to share ideas and opinions and the bottom-line is “YOU” matter!, • We value our employees' Quality of Life, and when it comes to mental health, recovery, and self-care, there is no one-size-fits-all approach that is why we provide resources where employees can find information on several wellness topics like nutrition, exercise, emotional health, and more!, • We all need to rest and recharge, that’s why in addition to vacation and sick time we also offer 10 days + 2 half days company-paid holidays!, • We offer a variety of benefits that offer you flexibility and choice, a simple selection experience, and the ability to take control over your benefit spending., • 401(k) Retirement Plan with Company Match., • Life is unpredictable, having Company Paid Life Insurance and knowing that your loved ones will be protected financially in the event of an unexpected death can give you peace of mind., • We also offer DailyPay, HSA, FSA, EAP and Pet Insurance! Flexibility & Evolving Responsibilities This job posting is intended to convey the general nature and level of work expected in the role. It is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee. Responsibilities may evolve over time, and team members may be asked to take on additional tasks or adjust their focus in response to changing business needs—sometimes with or without prior notice. This flexibility is a valued part of our culture and supports our commitment to collaboration, agility, and shared success. McGrath will continue pre-employment drug testing including marijuana, even in states where it is legal, for this position which is classified as safety-sensitive within our construction operations and Drivers. Ensuring a drug-free environment is not only essential for the well-being of our team members but also aligns with regulatory requirements that govern safety-sensitive positions and commercial driving. Pre-employment screenings are conducted after a conditional offer of employment is extended, in accordance with fair hiring laws. All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, on the basis of disability and any other legally protected status. We are interested in every qualified candidate who is legally authorized to work in the United States on a permanent basis. At this time, we do not sponsor employment visas or provide immigration sponsorship now or in the future. Our company uses E-Verify to confirm employment eligibility. #MMMC

Job Description The Warehouse Associate role supports our Company’s warehouse operations. This role will perform various warehouse activities such as receiving, input, sorting, loading and unloading inventory/products and all other duties as assigned. Duties and Responsibilities • Report shortages on warehouse materials (ex: crating materials, pallets, and crates for export orders in compliance with export regulations)., • Prepares orders for shipping including end protectors, touch-up paint, tagging, palletizing, and wrapping., • Reviews and ensures all paperwork is prepared and included with the shipment., • Coordination of third-party freight and will-call orders., • Successfully complete Operator Safety Training of Powered Industrial Equipment Training Course., • Verifies and keeps records on incoming and outgoing shipments and prepares items for shipment., • Compares identifying information of incoming and outgoing shipments to verify information against bills of lading, invoices, work orders, and/or other records., • Determines the method of shipment, utilizing knowledge of shipping procedures, routes, and rates., • Affixes shipping labels on packed cartons or stencils identifying shipping information on cartons., • Posts weights and shipping charges, and affixes postage., • Unpacks and examines incoming shipments, rejects damaged items, records shortages, and corresponds with shipper to rectify damages and shortages., • Scan and store all data received from a customer on incoming jobs, as well as, create data packs and assigns incoming work orders to jobs., • Examines outgoing shipments to ensure shipments meet specifications., • Pull and review all orders per quality control standards., • Report maintenance and repair needs for all warehouse equipment to Warehouse Manager., • Use of forklift and other warehouse equipment., • Delivery/Pick Up driver as needed., • All other duties as assigned., • Frequent overtime, including weekends., • Lift/move valves that range from 5 to 80 pounds max throughout the day., • This warehouse location can process up to 100 orders per day. Qualifications • Minimum 1+ year experience in industrial supply and/or valve shipping/receiving., • High School diploma or GED required., • Prior forklift & overhead crane experience (electric and/or sit-down)., • Prior experience with wireless warehouse scanners., • Must be able to read, write and speak English. Bilingual (Spanish) is a plus. Knowledge, Skills and Abilities • Strong attention to detail, stays organized and ability to problem solve., • Basic computer skills., • Good verbal communication skills.

Job Description OVERVIEW: Oversees and manages the facilities, health, safety , security and environmental (HSSE) aspects for oil and gas related research laboratories in North America. This position will develop, implement and monitor a centralized HSE function that includes processes and training programs that are in compliance with corporate safety guidelines, federal/state/local regulations, and international best practices. This position will provide leadership, technical and regulatory expertise in the areas of This role involves leading a team of HSSE professionals to ensure compliance with all relevant regulations and standards, promoting a culture of safety, and minimizing risks to employees, contractors, and the environment. The Facilities/HSSE Advisor is responsible for overseeing and managing all aspects of facilities R&D operations and ensuring compliance with Health, Safety, Security, and Environment (HSSE) regulations. This role involves developing and implementing policies, conducting inspections, providing training, and managing emergency response plans. The Facilities/HSSE Advisor will work closely with various departments to integrate HSSE considerations into all operations and maintain a safe and efficient working environment. Frequently with Division Heads, other supervisory personnel, and departmental director to develop information, review safety plans, and coordinate ongoing HSSE efforts. SCOPE: Serves as a Facilities & HSSE Leader at AACO Research and Development Center in North America. PRINCIPAL DUTIES: • Develop, implement, and maintain Facilities, HSSE policies, procedures, and programs to ensure compliance with local, state, and federal regulations., • Lead and manage the R&D Facilities and HSSE team, providing guidance, training, and support to ensure effective performance and professional development., • Conduct regular risk assessments and audits to identify potential hazards and implement corrective actions., • Investigate incidents and accidents, identify root causes, and develop strategies to prevent recurrence., • Collaborate with other departments to integrate HSSE considerations into all aspects of the company's operations., • Monitor and report on R&D HSSE performance metrics, providing regular updates to senior management., • Ensure effective emergency response planning and coordination, including conducting drills and training sessions., • Promote a culture of safety and environmental responsibility through communication, training, and engagement initiatives., • Stay current with industry best practices and regulatory changes, and ensure the R&D HSSE programs are up-to-date., • Evaluates and monitors toxic chemicals, noise, radiation, lasers, indoor air pollution, stress, repetitive motion trauma, electric and magnetic fields, and infectious biological materials. Applies scientific and engineering principles and methods to identify, analyze and control potential hazards., • Design and evaluates work processes and engineering controls (i.e., lab hoods, emergency exhaust systems, gas detection) to minimize personnel and environmental exposures. Conducts risk assessments of work activities to determine priorities for health and safety measures and resource allocation. Determines effectiveness of engineering controls and makes recommendations regarding location, design, structure, operations, and maintenance of contaminant and physical agent control systems., • Develops and implements safety awareness programs to enhance employee’s safety culture, safety performance and wellbeing. Develops and delivers employee training to instruct employees about occupational health and the prevention of accidents., • Investigates injuries and incidents. Prepares reports of observations and analysis. Provides recommendations to prevent recurrence., • Guides the workplace Safety Committee. Compiles and analyzes safety statistics. Issues monthly reports and produces leading indicators and makes recommendations for improvement. Advises team leaders and provides support and technical assistance in the administration of and conformance with regulatory and Aramco’s environmental health and safety policies., • Responds to emergencies at any time during business and after business hours and weekends., • Perform other duties as assigned. MINIMUM REQUIREMENTS: • Ability to:, • design, develop, implement and administer professional-level industrial hygiene, safety, and environmental programs which meet OSHA, ANSI, NFPA, NEC, EGLE regulations and guidance., • inspect and evaluate workplace conditions, compile and issue monthly reports., • initiate and follow up on corrective actions and enforce standards., • coach, support and instruct employees to raise awareness and integrate safety into daily operations thorough inspections, assessments, etc., • communicate with and resolve issues with management and with government agencies., • develop training and safety awareness programs., • analyze various factors and use good judgement to make sound recommendations and decisions., • Proficient with business software applications., • Typically, at least ten (10) years of progressive experience in safety with responsibility for safety plan development, safety training, and compliance. Experience with safety management systems, asset integrity, laboratory engineering controls and equipment, risk assessment, chemical hygiene, emergency preparedness, and incident investigation/reporting. Oil and gas experience preferred. NO THIRD-PARTY CANDIDATES ACCEPTED Powered by JazzHR pGwRCc7AIM

Job DescriptionJob Description – EHS Coordinator Position Overview: The EHS Coordinator provides on-site guidance and supports the implementation and execution of Environmental, Health, and Safety (EHS) programs on electrical construction projects. This role assists project teams in maintaining compliance with company policies, regulatory requirements, and project-specific safety standards while promoting a strong safety culture. The EHS Coordinator may independently oversee safety on smaller projects or provide direct support to an EHS Manager on larger or more complex job sites. This role includes hazard identification, incident prevention, safety documentation, and employee engagement, ensuring work is performed safely and in compliance with company and regulatory standards, including those established by the Occupational Safety and Health Administration. Key Responsibilities: • Support implementation of EHS programs on assigned electrical construction projects., • Identify hazards and assist project teams in implementing effective risk mitigation strategies., • Conduct site safety inspections, audits, and observations to verify compliance with company and regulatory requirements., • Participate in and lead the development and maintenance of Site-Specific Safety Plans (SSSPs), Activity Hazard Analyses (AHAs), and other project safety documentation., • Facilitate toolbox talks, safety orientations, and safety stand-downs for employees and subcontractors., • Assist with and lead incident reporting and investigations, including documentation, identification of causal factors, and corrective action implementation., • Provide oversight of high-risk work activities, including fall protection, lockout/tagout procedures, confined space entry, and other high-risk activities., • Maintain accurate safety records, including inspections, incident reports, training documentation, and regulatory records., • Participate in project safety meetings and coordinate project management, general contractors, and other stakeholders., • Support implementation of corporate EHS policies, initiatives, and safety improvement programs., • Provide coaching and guidance to field personnel to reinforce safe work practices and promote a proactive safety culture. Education, • Bachelor’s degree in Environmental Health & Safety, Occupational Safety, Construction Management, Industrial Hygiene, or a related field preferred., • Equivalent combination of education, training, and relevant experience may be considered. Experience, • 2–5 years of experience in construction safety, environmental health, or occupational safety roles., • Experience in commercial, industrial, or electrical construction environments preferred., • Experience in Mission-critical/data-center environment is strongly preferred., • Familiarity with construction safety regulations including 29 CFR 1926 construction standards and basic knowledge of NFPA 70E standard for electrical safety.Required Training / Certifications:, • OSHA 30-Hour – Construction., • First Aid/CPR/AED Training., • NFPA 70E TrainingOptional / Preferred Certifications:, • Construction Health and Safety Technician (CHST), • Certified Safety Professional (CSP) or progress towards certification, • Other designations such as OSHA 500 – Construction Outreach TrainerSkills & Competencies, • Strong hazard recognition and problem-solving abilities., • Effective communication and interpersonal skills., • Ability to work collaboratively with project management and field personnel., • Strong organizational and documentation skills., • Ability to influence safe behaviors and reinforce company safety expectations., • Competitive salary based on experience., • Comprehensive benefits package including medical, dental, vision, and 401(k)., • Paid time off and holidays, • Professional development & career advancement., • Travel to project sites; per diem when applicable Join a company that’s building more than just electrical systems—join a team committed to safety, excellence, and innovation. If you meet the qualifications above and are ready to contribute to the continued success of Hays Electrical Services, we encourage you to apply. Powered by JazzHR zWDrRJpmZ1

Job DescriptionFire & Security Technician – Texas (Field Role) Location: Texas (with travel) Company: MDI Security Compensation: $25–$35 USD/hour (based on experience & certifications) About MDI Security MDI Security, founded in 2008 by George Macias, is a U.S.-based security company with over 15 years of experience delivering fire protection, electronic security, and integrated life-safety solutions for commercial, industrial, and institutional clients. MDI operates across multiple U.S. states, with offices and active projects in Tennessee, Florida, Texas, Arizona, Nevada, Utah, Wisconsin, Kentucky, Missouri, and Colorado. While Texas is currently a growth and expansion market, MDI brings a strong operational foundation supported by experienced multi-state field teams. In parallel, MDI is expanding internationally, with deployments in more than 10 countries, supporting global clients with scalable security and AI-driven monitoring solutions. MDI specializes in the design, installation, service, and maintenance of fire alarm systems, CCTV, access control, intrusion detection, and advanced AI-enabled security platforms, combining disciplined field execution with modern technology. Job Overview MDI Security is seeking Fire & Security Technicians to support the installation, service, and maintenance of fire alarm systems, CCTV, access control, and electronic security solutions across Texas and other U.S. states as required by project demand. This is a field-based, hands-on role for technicians who are disciplined, reliable, and comfortable working independently in commercial and industrial environments. Core Technical Requirement All candidates must show explicit, verifiable experience with the following fire and security platforms: • Ademco / Honeywell, • Fire-Lite, • Bosch, • Radionics, • DMP, • Install, service, and troubleshoot commercial fire alarm systems (conventional and addressable)., • Install and maintain CCTV, access control, intrusion alarms, and low-voltage systems., • Perform system testing, inspections, and preventive maintenance., • Diagnose and resolve technical issues on-site with minimal supervision., • Read and interpret blueprints, schematics, and technical documentation., • Ensure compliance with NFPA codes, AHJ requirements, and company standards., • Complete service reports and documentation accurately and on time., • Communicate professionally with clients regarding system status and recommendations., • Coordinate with internal technical teams as required. Required Qualifications • Minimum 2+ years of hands-on experience with fire alarm and/or security systems., • Explicit experience with the platforms listed above., • Proven experience with low-voltage wiring., • Strong troubleshooting and problem-solving skills., • Ability to work independently in the field., • Valid driver’s license and clean driving record., • English required; Spanish is a plus. Preferred Certifications (Strong Plus) • Texas Fire Alarm License., • NICET Level I or II (or in process)., • OSHA safety training., • Manufacturer certifications (Fire-Lite, Honeywell, Bosch, DMP). Travel & Availability (Required) • Extensive travel within Texas., • Occasional travel to other U.S. states depending on project needs., • Flexibility to work early starts or extended days when required by deployments. ⚠️ This role is not suitable for candidates seeking a fixed-location or desk-based position. Who Should Apply • Technicians with real, documented fire alarm or security platform experience., • Professionals comfortable traveling and working in the field., • Individuals seeking consistent, long-term field work with a growing company. Who Should NOT Apply • Candidates without explicit fire alarm or security platform experience., • General electricians without fire/security system background., • Technicians unwilling to travel., • Individuals seeking desk-based, fixed-location, or short-term work only.

Job Description Overview Job Title: Plant Supervisor Location: Houston, TX Salary: $26 - $29 / Hourtly DOE Expansa is a premium provider of turnkey water treatment solutions. POSITION SUMMARY: The Resin Regeneration Plant Supervisor (RRS) is responsible for performing day-to-day operations of the Resin Regeneration Plant, focusing on resin handling and system maintenance to ensure high-quality output and efficient workflows. The role involves operating and maintaining essential plant systems, executing resin regeneration processes, and troubleshooting issues to ensure smooth operation. The RRT works collaboratively with the plant team, ensuring compliance with safety and quality standards while contributing to continuous improvement efforts. This role requires strong technical skills, attention to detail, and the ability to work effectively in a dynamic industrial environment. BENEFITS: * • Medical, Dental, Vision Insurance, • 401K with Company match, • Paid Time OffKEY RESPONSIBILITIES, • Air Compressors and Receivers: Manage compressed air systems to ensure reliable operation of pneumatic Perform regular maintenance to prevent downtime., • Blower Systems: Oversee the operation of blower systems used in regeneration processes, ensuring consistent performance., • Hot Water Systems: Maintain hot water systems used for various processes, including temperature monitoring and system repairs., • Water Tank Farm: Monitor water storage systems, ensuring adequate supply and proper water quality for plant operations., • Chemical Tank Farm: Handle storage and transfer of chemicals safely, ensuring compliance with regulatory requirements and proper inventory, • Pump Skids: Operate and maintain pumps for transferring water, chemicals, and resin slurries. Troubleshoot issues such as cavitation or flow, • Cartridge Filter Systems: Replace and maintain cartridge filters to ensure filtration efficiency and prevent contamination of downstream, • Activated Carbon Vessels: Oversee carbon filtration systems, ensuring effective removal of organic impurities and maintaining system, • Reverse Osmosis (RO) Systems: Monitor and maintain RO systems for water purification, including membrane cleaning and troubleshooting high differential pressures., • Electrodeionization (EDI) Systems: Operate and service EDI systems to achieve high-purity water, including module inspections and electrical, • Deionized (DI) Pod Usage: Manage the setup, monitoring, and replacement of Resin Pod Commissioning: Prepare resin pods for operational use, ensuring proper setup and functionality., • Resin Unloading and Transferring: Safely unload and transfer resin between systems while minimizing contamination and loss., • Resin Separations: Conduct resin separation processes to isolate cation and anion resins for regeneration., • Resin Regeneration: Execute chemical regeneration processes to restore resin capacity, including acid and caustic dosing., • Resin Remix: Combine cation and anion resins post-regeneration for use in mixed-bed applications., • Resin Loading: Properly load resin into pods or vessels, ensuring correct quantities and uniform distribution., • Resin Analysis: Perform resin quality analysis to assess performance and determine regeneration schedules., • DI Trailer Loading/Unloading: Safely load and unload deionization trailers, ensuring proper handling and documentation.QUALIFICATIONS:, • High school diploma or equivalent required; technical or vocational training, • Relevant certifications in water treatment, industrial operations, or chemical handling are a plus., • Excellent troubleshooting and problem-solving, • Strong communication and interpersonal, • Ability to manage multiple tasks and prioritize, • Proficiency in using plant control systems and basic computer, • Minimum 1-3 years of experience in resin regeneration, water treatment, or a related field., • Demonstrated leadership experience in a plant or industrial environment., • In-depth knowledge of plant controls systems and utilities., • Proficiency in operating and maintaining resin regeneration equipment., • Strong understanding of chemical handling and water treatment processes., • Ability to work 40-60 hours per week if required including weekends.WORK ENVIRONMENT:, • Requires working in industrial and plant environments with exposure to chemicals, noise, and varying temperatures., • Physical demands include standing for extended periods, lifting up to 50 lbs, and working in confined spaces or elevated areas., • May require working overtime, weekends, or holidays to meet operational demands.

Snapshot Of Your Day As an FSR Field Service Representative specializing in Reciprocating Compressors & integral gas Engines (RCE), you will travel to client facilities across the US and some international. You will provide technical advisory services on process reciprocating compressors, high-speed compressors, integral gas engines, and related accessory equipment. Your responsibilities include scheduled maintenance, installing upgrades or new equipment, and responding to unplanned events. Your role is crucial in improving equipment reliability and reducing downtime! You will facilitate communication between field personnel and Siemens Energy engineering centers, ensuring flawless execution of tasks. Documenting clearances, addressing technical queries, and managing job progress are essential for your success. How You’ll Make An Impact • Maintain the highest level of a zero-harm culture by following and enforcing all company and customer EHS policies and programs., • Interact with different levels of customer and Siemens organizations to report progress, resolve issues, and identify potential services to be offered based on customer needs., • Perform complex problem solving on machinery and ancillary systems. Coordinate with engineering in reporting and implementing changes to resolve issues., • Provide technical directions to client or Siemens Energy employees. Communicate progress, schedules, and open items with clients; Prepare detailed technical reports., • Travel for extended periods of time, both domestic and some international as assigned. (International assignments may include travel to developing countries.), • High School Diploma/GED that can be verified with 7+ years of combined experience with overhauling process reciprocating compressors, high-speed compressors, integral gas engines; a Bachelor's degree in related field with relevant experience is preferred., • Advanced proficiency in precision measurement and ability to understand and interpret engineering drawings and technical documents., • Excellent and professional oral and written communication skills, and the ability to conduct difficult discussions with clients to protect company interests; negotiating skills are a valuable plus., • Must be proficient using Microsoft Office and web-based portals; Basic understanding of instrumentation and control systems, PLC’s, etc. is preferred., • Must hold valid driver’s license and either hold or able to obtain a passport and TWIC card. About the Team Transformation of Industry Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key, and demand for green H2 and derivative fuels will rise. We enable the decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one-sixth of the world’s electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ___ Rewards • Career growth and development opportunities, • Supportive work culture, • Company-paid health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits, • Parental leave #page

About Us We have earned a reputation for leading the industry in turnarounds, specialty welding, construction, pipe fabrication, and maintenance. Backed by a team of talented supervisors and craft professionals, we are prepared to tackle the toughest jobs for clients in the refining, chemical, petrochemical, renewables, and midstream industries. Job Summary Combination Welders must have industrial welding experience in a petrochemical or related industrial fabrication facility. Welders having the ability to read and interpret blueprints, ISO's, field drawings, and material takeoffs a plus. Welders will perform a range of duties which will include but is not limited to welding various metals using processes such as SMAW, GMAW, FCAW, and GTAW. Welders are responsible for selecting, setting up, and staging the proper equipment for their jobs and that each are in ample supply and working order. This includes welding machines, gases, tools, and other consumables. Welders are also responsible for double checking the fit of pipe or other structural pieces and to allow for proper attachment. Attention to safety and detail are of the utmost importance. Welders must successfully pass pre-employment weld tests as part of the on-boarding process. Requirements * Industrial Combo welding experience with GTAW and SMAW. * Must pass GTAW & SMAW manual welding procedures test. * Current Basic Orientation Plus (Safety Council Card) or within 3 months expiration. * Current TWIC card * Have three (3) or more years' experience in your craft. * Compliance with designated welding procedures and specifications. * Follow established job-site safety and work regulations, as well as maintaining a safe and clean work area. Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards. * Use appropriate hand and power tools to properly measure, cut, assemble, weld and install all types of pipe and/or similar tubular products; install supports, valves and other control equipment; test installed piping systems and install all other related items in accordance with the applicable plans and specifications; bolt, clamp or weld parts to secure in position for welding; weld components according to specific process and code. * Produce quality work, meeting requirements of plans, specifications and industry standards. Physical Requirements * Significant and sustained periods of standing, walking, bending, squatting and lifting. * Good communication skills (speaking and actively listening) with co-workers and supervisors. * Must have good manual dexterity to perform precision adjustments of machinery parts and controls. * Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. * May be required to lift, carry and move up to 50lbs. * Will work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection. * Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. * Must be capable of working outside in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day. * Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. We offer our employees a competitive salary and comprehensive benefits package and are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here () . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. #REPCON Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Affirmative Action Policy Please review ourAffirmative Action Policy () . Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companieslist open positions here () . Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Email a Friend Email a Friend Job Locations US-TX-Corpus Christi | US-TX-Houston ID 2025-1544 Company Repcon, Inc. Category Fabrication Position Type Full-Time Location Type Onsite Posted Date 3 months ago (10/15/2025 9:43 AM)

PrideStaff - - Responsibilities: Ensure safety precautions are followed while performing work; Complete daily work orders as scheduled; Operate vacuum cleaners to clean rugs, carpets, and blinds; power wash walls, ceilings, woodwork, windows and doors; Maintain equipment and organize shop, equipmen

Well-established, stable US Manufacturer seeking experienced Journeyman Millwright to join the team! This Jobot Job is hosted by: Catherine Reid Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $37.75 - $39.25 per hour A bit about us: 50yr old Manufacturing company offering stability, training, and terrific career opportunity! Why join us? We offer a stable company, growing client base, great people, strong pay, and terrific benefits package. With tremendous growth opportunity, you can build your long-term career with us! Job Details Job Details Our organization is seeking a highly skilled, dedicated, and experienced Journeyman Millwright to join our dynamic team in the Manufacturing industry. As a Journeyman Millwright, you will be responsible for installing, maintaining, and repairing systems and equipment within our facilities. Responsibilities 1. Installation and assembly: Install and assemble new machinery and equipment according to technical plans, blueprints, and manufacturer specifications., 2. Maintenance and repair: Perform preventive and corrective maintenance on industrial equipment, including pumps, conveyors, turbines, and gearboxes. Diagnose mechanical, hydraulic, and pneumatic problems to make necessary repairs., 3. Precision alignment: Use precision tools like micrometers, dial indicators, and laser alignment devices to set specified clearances and align moving and stationary parts., 5. Rigging and hoisting: Safely rig and hoist heavy equipment and machinery, directing crane operators during placement., 6. Documentation: Accurately complete maintenance and repair logs, work orders, and other records to document equipment condition and work performed., 7. Safety: Adhere to all safety protocols, including lockout/tag-out procedures, and follow OSHA and company safety regulations., 8. Collaboration: Work effectively with other team members, including engineers and electricians, to complete projects. Qualifications 1. Journeyman Millwright license., 2. 5+ years of experience in an industrial or commercial setting., 3. Proven experience with maintenance, electrical troubleshooting, machine maintenance tech, pneumatics, electrical controls, and wiring., 4. Demonstrated ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc.) and electrical drawings and blueprints., 5. Thorough knowledge of safety procedures and legal regulations and guidelines., 6. Excellent critical thinking and problem-solving ability., 7. Excellent physical condition and flexibility to work long shifts and overnight., 8. Diploma in relevant vocational training or successfully completed apprenticeship as an electrician. The successful candidate will have a hands-on approach, ready to respond quickly and effectively to any electrical issues that arise. They should be team-oriented, as they will be working with other team members and departments to ensure the efficiency and safety of our operations. If you are a problem solver who loves a challenge, this position offers the opportunity for a rewarding career in a fast-paced, growth-oriented environment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Heavy Industrial Electricion Opportunity / $5,000 Sign On And Monthly Bonus / Amazing Benefits and Growth Opportunity This Jobot Job is hosted by: Jack Campbell Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $36 - $38 per hour A bit about us: A growing heavy industrial metal manufacturer in the Rome, NY area is seeking an experienced Industrial Electrician to join its maintenance team. This role supports high volume metal processing equipment and performs a full range of electrical troubleshooting, repair, and installation work on production machinery, high horsepower motors, and industrial power systems. The ideal candidate is hands on, safety focused, and confident working in a team environment at a demanding metal manufacturing environment. Why join us? $5,000 sign on bonus and monthly paid bonuses! ? Generous overtime structure. Time and a half Monday through Saturday and double time on Sundays ? Profit sharing program ? 10 paid holidays ? 2 weeks PTO after 6 months with rollover ? 401k with 4 percent match Job Details What you will be doing ? Troubleshoot, repair, and install electrical components, controls, and power systems on heavy metal processing machinery including presses, furnaces, rolling equipment, and high horsepower motors ? Diagnose issues with temperature control instrumentation, sensors, thermocouples, and recording devices used in metal heating and forming processes ? Troubleshoot PLC systems used to control automated manufacturing equipment ? Diagnose, maintain, and repair AC and DC drive systems supporting large mechanical loads ? Perform preventive and predictive maintenance to improve reliability and reduce downtime in a 24/7 industrial operation ? Work safely around molten metal, high heat, high voltage environments, overhead cranes, and rapidly moving mechanical systems What we are looking for ? Industrial maintenance electrical experience in metal manufacturing, foundry, steel/metal processing, heavy machining, or other rugged industrial environments ? Strong AC and DC drive troubleshooting background, especially with high horsepower or variable frequency applications ? PLC troubleshooting and basic programming experience ? Ability to work off shifts, weekends, and overtime as needed to support continuous operations ? Strong commitment to safety in high heat and high energy environments ? High school diploma or equivalent required ? Journeyman level experience preferred, but not required Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Classification: Non-Exempt Pay: $22-30/hr Schedule: Monday- Friday, 4:30 AM-1:00 PM. Some Saturdays and holidays included. We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers' manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit ___. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

There's a Place for You at Summit Electric Supply. A career at Summit Electric Supply is more than a job. You're investing in a brighter, more sustainable future together and joining a team that makes a real difference for our customers. Summit Electric Supply offers electrical products and services to contractors. If it helps bring electricity to an office, home, factory, or other building - you can find it here. We operate throughout Arizona, New Mexico, Texas, and Louisiana and are part of the Sonepar group, the world's #1 electrical distributor with over 45,000 associates around the globe. Being "Powered by Difference" means we respect and value diverse perspectives. Within Summit Electric Supply we offer a supportive culture and great benefits, and as part of the larger Sonepar group, we can offer exciting opportunities to grow your career. Title: Regional Distribution Center Manager Reports to: Vice President of Operations or Regional Operations Director Role Summary: Complete responsibility for all operations activities in a distribution center environment. Responsible for operational excellence and process improvement; ensuring customer expectations are met or exceeded. The Manager also oversees talent acquisition, development, and retention of associates. Operates as a strategic partner of Summit's sales leadership in driving revenue growth and profitability goals while working within established operating budgets. This position will work closely with all levels of Operational Leadership to leverage analysis, modeling, and forecasting ensuring the Distribution Center has the capacity, speed, and cost-to-serve characteristics necessary to meet the demands of assigned Service Centers, specialized divisions, and customers. Principal Accountabilities: (essential job functions) • Provides effective leadership of others to ensure efficient distribution operations and adherence to policy, procedure, and process excellence., • Lead a proactive safety program within the work group(s) consistent with company policy, providing a safe and secure work environment that complies with all safety and Hazmat rules and regulations, legal regulations, and human resource policies., • Responsible for talent management including selection, termination, performance review and professional development of direct and dotted line reports., • Assess DC service levels and collaborate with sales team to understand customer needs and problems. Assure successful management and support of customer relationships by all DC location team members by ensuring appropriate staffing levels to meet service, financial and operational support demands., • Strategically oversees carrier services and dedicated delivery processes. Partner with support staff to ensure compliance with all DOT regulations., • Effectively utilize training programs to develop sales and operations expertise within the facility., • Work closely with operations and sales leadership to ensure customer satisfaction and problem resolution. Coordinate and communicate effectively with all company departments., • Develop annual operating budgets in support of the corporate financial goals and responsible for P&L management. Complete cost justification and determine ROI., • Achieves cost control through productivity of personnel, efficient utilization of facility space and proper protection of stored materials. Ensure accurate inventory levels and prevent shrinkage., • Review productivity and service metric data to identify and/or solve operational issues by implementing continuous improvement initiatives aimed at strengthening team unity, achieving company goals, and improving productivity., • Responsible for the development and implementation of strategies within the Distribution Center environment that improve efficiency, reduce costs, increase profitability, and generate value for Summit's customers. Emphasis should be on leveraging operational functions in innovative and creative ways that create competitive advantages and provide additional revenue streams for Summit., • Review and approve all distribution center purchase requisitions for discretionary expenditures. Manage and recommend capital expenditures with respect to maintenance and repair for equipment, buildings, and grounds., • Knowledge of distribution operations (i.e., shipping, receiving, layouts, flow patterns, freight, traffic) with quantifiable success in driving operational performance and efficiencies., • Strong financial acumen with an understanding of supply chain and its impact on financial results., • Minimum 5 years of experience in the distribution of commercial and/or industrial products, preferably in electrical distribution or adjacent industry., • Minimum of 5 years in leadership positions, managing supervisors in operational settings., • Ability to devise strategies and Business Plans to execute the vision, including defining goals and objectives, investments required and subsequent ROI., • Ability to ensure compliance with policies and procedures to ensure Summit is operating at maximum efficiency and accomplishing its performance objectives., • Highly effective user of ERP systems (preferably SAP), Warehouse Management Systems and barcode technology, and BI tools., • Proven track record of systematically recruiting and developing talent in organizations., • Detail oriented leader with excellent time management skills and ability to multi-task to achieve expected customer service KPIs., • Ability to effectively present information in writing, including business correspondence, reports, and strategic plans., • Demonstrated knowledge of MS Office suite applications (Word, Excel, PowerPoint, Outlook), • Problem solve and innovate to avoid or provide solutions to problems., • Demonstrate an ability to be self-directed and motivated following a flexible schedule., • Bachelor's degree in Supply Chain Management, Logistics, Operations, Purchasing or related equivalent experience (5 - 10 years) leading in a distribution center environment., • Experience with Lean, Six Sigma or similar continuous improvement methodologies., • Successful experience in deploying of regional distribution centers. What We Offer You We offer great family-friendly benefits to full-time associates: * Healthcare plans * Dental & vision * Paid time off * Paid parental leave * 401(k) retirement savings with company match * Professional and personal development programs * Opportunity to become a shareholder * Employer-paid short- and long-term disability * Employer-paid life insurance for spouse and dependents * Robust wellness program * Gym reimbursement * Employee Assistance Program (EAP) Summit Electric Supply offers tuition reimbursement, and earned wage access. We're proud to be a military-friendly company, and our many employee resource groups (ERGs) help you make connections and feel supported. Learn More About Us Get to know us on YouTube, LinkedIn, Facebook and Instagram and learn how we're "Powering Progress for Future Generations." ___ Learn more at ___ Summit Electric Supply is part of the Sonepar family of brands: ___ Equal Employment Opportunity Statement Sonepar is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, or any other categories protected by federal, state or local law. Sonepar and our family of brands are committed to the full inclusion of all qualified individuals. In keeping with our commitment, we will take the steps to assure that people with disabilities are provided reasonable accommodations. Accordingly, if a reasonable accommodation is required to fully participate in the job application or interview process, to perform the essential functions of the position, and/or to receive all other benefits and privileges of employment, please call 843-745-2420 or email___.

What Timken makes possible begins with you. Those who came before us helped land a man on the moon, create the world's infrastructure, and introduce renewable energy alternatives. Now you can join the Timken team to write your own unique story and help drive what's next. A career at Timken means you can have an immediate impact doing Work That Matters to the world- improving the efficiency of today's industrial equipment and preparing for the future of motion on our planet and beyond. New employees can start contributing right away, and there are many opportunities to advance your career at your own pace. Join our global team of 19,000 people in 45 countries, and start helping our customers push the limits of what's possible in their world of motion. What we do Join IMECH at an exciting moment of growth - we're rolling out Plasma Transfer Arc (PTA) cladding technology and need careful, detail-driven technicians to prepare parts for precision surface enhancement. As a PTA Prep Technician you'll play a critical role in the process by tacking tiles, learning the process, and following strict procedures to ensure every component meets exacting standards before PTA application. We value a "do it right the first time" attitude: your accuracy and adherence to work instructions reduce rework, protect downstream processes, and directly impact product quality. If you take pride in precision, thrive on repeatable workmanship, and want to grow with a team investing in advanced coating technology, IMECH offers hands-on training, clear advancement paths, and a collaborative environment where your care makes a measurable difference. What will you do? Your day to day success is determined by your ability to: • Follow all safety rules and regulations include wearing required PPE., • Manufacture a quality coated product by following written and verbal instructions., • Adhere to all standard procedures and specifications daily (handling rejects, recycling materials, scrap, etc.)., • Identify and correct defects; perform adjustments to resolve deviations and document materials/process discrepancies., • Learn and assist in developing new techniques for new products., • Accurately measure and record all pertinent production and quality data., • Perform quality checks using inspection techniques to verify thickness, adhesion, and appearance., • Communicate quality issues and non-conformances to management promptly., • Use various measuring tools to ensure conformity to visual and dimensional specifications., • Use hand tools and equipment to ensure proper product fit and adherence., • Monitor inventory of materials, tools, and supplies., • Assist with general shop duties during downtime - support warehouse tasks, basic maintenance, material handling, and coating-area assistance as needed to keep production moving., • Participate in continuous learning opportunities., • Maintain all work areas in a clean and orderly manner., • Perform other job-related duties as assigned. With Quality in mind, you also bring the following: • High School Diploma or GED., • Basic math, geometry, and mechanical aptitude., • Basic measurement and print-reading skills., • Precision and strong attention to detail., • Excellent manual dexterity and ability to control application tools precisely., • Strong verbal and written communication skills., • Aptitude for decision-making and problem solving., • Excellent team skills; collaborative, open-minded, adaptable., • Motivation to self-advance and grow within the company. Preferred Qualifications: • Two Year Technical Degree accreditation preferred., • Two years of previous work experience in a manufacturing environment preferred., • Experience with metal surface coating processes is desirable (flame spray, PTA cladding, etc.), • Experience in leading a team an asset., • Must be eligible to work in the U.S., • Passion in delivering accuracy and quality as a priority. Physical Requirements: • Ability to lift to 50 pounds or more., • Prolonged standing and walking., • Repetitive movement, lifting, pushing, and pulling. All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law. Timken is a global technology leader in engineered bearings and industrial motion. Our expanding portfolio of next-generation solutions helps customers around the world improve efficiency, solve their toughest challenges, and push the boundaries of performance. We employ 19,000 people globally, operate from 45 countries, and posted $4.6 billion in sales in 2025. We have been recognized as one of America's Most Responsible Companies 6x by Newsweek and one of the World's Most Ethical Companies 15x by Ethisphere. Why Choose Timken? • Over a century of knowledge and innovation, • A culture of top performance, • A global, diverse environment, • Products that contribute to a sustainable world, • A conviction to improve communities around us, • Competitive salary and benefits Not Ready To Apply? Stay connected by joining our network and we'll keep you informed about upcoming events and opportunities that match your interests. Talent Community

NCCER Pipefitter Foreman - Austin Industrial (Pasadena, TX).Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas,

Job DescriptionPosition: Industrial/Marine Electrician Location: Channelview, TX 77530 Schedule: 7am to 4pm M-F Hourly Rate: $22-$26 per hour DOE Employment Type: Contract/Full-time About the Role: Integrity Trade Services is hiring Electricians in Houston and Channelview, TX. Marine, motor repair, inspection and troubleshooting motor control systems, maintenance, and power transformers experience is strongly preferred. This role requires a valid driver’s license and a clean MVR. Key Responsibilities: • Troubleshooting basic electrical circuits, • Must know how to use multi-meter/ amp meter/ megger, • Terminate most common types of electrical equipment, • Read one line drawings, • Perform routine maintenance and repairs to pumps, • Supervise and train tech level 3, • Assist in managing projects as assigned, • On-call for a (7) seven day period, • Travel occasionally for the company to work at other locations, • Follow all company safety and operational policies, • Any other duties as needed or directed by management as it relates to customer’s operations, • Our customer is a 24 hour a day 7 day a week operation and overtime is requiredPhysical:, • Ability to lift and carry 50lbs for extended distances, • Ability to work in any and all adverse weather condition, • Ability to climb ladders, stairs and gangways up to 25 feet in height, • Ability to stoop, kneel, crouch and work above head for extended periods of time, • Ability to operate company vehicles in a safe and courteous mannerQualifications:, • High school diploma or GED required, • Previous experience in electrical service industry, • Good communications skills, • Professional manner in dealing with other employees, management and customers, • Organizational Skills, • Basic mechanical skills, • Must be capable of acquiring valid TWIC, • Must have valid driver’s license Interested? Applicants must apply before reaching out. Questions may be directed via text only to Brenda Gonzalez at 281-479-1803. Equal Opportunity Employer We celebrate diversity and are committed to creating an inclusive environment for all applicants, including protected veterans and individuals with disabilities. About Us: Integrity Trade Services’ core philosophy is "Staffing you can trust." We are dedicated to safety, honesty, fairness, and integrity, providing reliable job opportunities that get you to work quickly, safely, and fairly compensated. #HIGH1 #ZR