Trabajos material en Cherry Hill, New JerseyCrear alertas

Job Description Stop turning wrenches for a company that doesn't value your craft and has a no A-hole policy. We are looking for a mechanic, One who can maintain equipment and can walk up to a piece of equipment and figure out why it isn't working. At MHS Lift, we’ve spent 56 years building a reputation as a leader in material handling—but we know we’re only as good as our employees. As a Top Workplace since 2020 from the Philadelphia Inquirer and USA Today for the past 2 years, and an employee-owned company, we don’t just offer a job; we offer a stake in the business. We are looking for a self-motivated Forklift Mechanic who wants to get out from under the shop lights and into the field, solving real-world mechanical puzzles and keeping our customers moving. Position Summary The Forklift Mechanic is responsible for performing scheduled maintenance, troubleshooting, diagnosing, and repairing forklifts and other warehouse equipment at customer locations. This role requires strong technical skills, effective communication, and a commitment to safety and customer service. Why Mechanics Choose MHS Lift: Ownership: As an employee-owned company (ESOP), you aren't just an hourly worker—you’re a shareholder. (once qualified) Field Autonomy: Once you complete your training, you will leave from your home in our service van to go to our customer site. Stable Work: 56 years in business means no "slow seasons." The Reward: Competitive hourly rates based on your actual diagnostic and repair skills, paid weekly. Key Responsibilities: • 2 + years in Diesel, Small Engine, Automotive, or Heavy Equipment repair who are looking to transition into the Material Handling industry., • Experience as a Forklift Mechanic is preferred, • Experience with troubleshooting, diagnosis, and repair., • You should be comfortable using voltmeters and ohmmeters and possess the "electrical logic" required to read and interpret complex electrical schematics., • A valid driver’s license and a clean driving record are required for field work., • Ability to lift to 50 lbs unassisted., • Ability to pass pre-screening, physical, and drug screen, • High School Diploma, GED, or equivalent About MHS Lift Founded in 1970 with the sale of a single forklift, MHS Lift has grown into a leading material handling provider with over 225 employees across the Americas. Headquartered in Pennsauken, New Jersey, we are proud to be an employee-owned company where many team members have built careers spanning 20+ years. When you join MHS Lift, you become part of a winning legacy built on respect, teamwork, and long-term success. We offer a comprehensive benefits package designed to support your health, financial security, and work–life balance. Benefits include medical, dental, and vision coverage, prescription coverage, and virtual urgent care services. Employees can plan for the future with a 401(k) featuring company match and participation in our Employee Stock Ownership Plan (ESOP). Additional benefits include paid vacation, holidays, sick time, bonus opportunities, group life and AD&D insurance, and an Employee Assistance Program. Optional supplemental benefits are also available, including additional life insurance, commuter benefits, legal services, and identity theft protection.

Job Description Roofing Service Technician We are looking for a Roofing Service Technician to join our organization. If you are a person with a strong work ethic, and basic knowledge of construction or roofing who wants to become a commercial roofing professional and join our team. We will provide extensive paid training for you to be able make repairs and/or repair recommendations, perform evaluations and Roofing Preventative Maintenance to low slope roofing systems. You must be professional, presentable, and a good communicator as you will be dealing directly with clients daily. • Excellent earnings - $23.00- $29.00 per hour (pay is based on experience; on average our Service Technicians make $77,000+ per year)., • Forty & more hours per week (with overtime work and pay of 10-15 hours per week)., • Three (3) annual bonus opportunities (safety bonus of up to $1,500.00 per year, individual performance bonus & company bottom-line bonus)., • GREAT BENEFITS- Paid Time Off, Health Insurance, Dental, Vision Care benefits, Free life insurance policy, and 401K plan., • Opportunity to advance, learn, grow, and increase your earning potential., • Training available for experienced construction candidates., • A military-friendly and veteran-friendly employer. What you'll do:, • Always follow safety on the job and while driving., • Inspect problem roofs, perform roof repair, and preventative maintenance., • Communication: Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions., • Dependability: Completes tasks on time; Follows instructions, responds to management direction., • Drives a company vehicle to clients’ buildings daily. What you'll need: • Minimum 1 year of relevant roofing or construction experience, or military experience., • Driver's License (REQUIRED)., • 21 years of age or older (REQUIRED to drive company vehicle)., • High school diploma, or equivalent (REQUIRED)., • Ability to travel out of town, for up to 4 weeks at a time, when local work is not available (REQUIRED)., • Must be able to work overtime in emergency situations., • Weekend work as needed., • Ability to communicate effectively through written correspondence and verbally in English. Physical Working Conditions: • Must be able to lift up to 50 pounds at a time on a regular basis throughout the day., • Must be able to frequently ascend/descend ladder from 10 to 40’ in height., • Must be able to remain in a stationary position for an extended period of time., • Constantly works in outdoor weather conditions., • Must be able to work in varied extreme weather conditions (extreme hot and extreme cold weather)., • Load and unload material and equipment and materials from variant heights., • Shovel loose materials such as gravel, sand metal snow, or dirt. Simon Roofing is an Equal Opportunity Employer and does not discriminate against any applicant on race, color, religion, national origin, gender, marital status, age, disability, sexual orientation, military/veteran status, or any other status protected by the Federal or State law or local ordinance. Note: The statements herein are intended to describe the general nature and levels of work performed by employees, but are not a complete list of responsibilities, duties, and skills required of the personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. FL License Number: CCC048202 I certify the information I have provided in this Employment Application is true and complete to the best of my knowledge. I understand that, if hired, discovery of any false information provided or any relevant information omitted (no matter when discovered) may result in the immediate termination of my employment. I authorize Simon Roofing and Sheet Metal Corp. (the "Company") to make whatever inquiries it deems necessary or appropriate of any person or organization to verify any of the information I have provided in this application and to determine my qualifications and abilities. I hereby release the Company from any and all claims or action or causes of action arising out of the Company's lawful inquiries and/or its determination of my qualifications and abilities. Powered by JazzHR ungXU5waBP

Job Description HVAC Installer Allied Experts \u007C Cherry Hill, NJ Step Into a Rewarding HVAC Career with Allied Experts Are you looking for a long-term career with a company that values quality workmanship, professionalism, and continued growth? Do you take pride in doing the job right and leaving every customer’s home better than you found it? If so, there may be a place for you on the Allied Experts installation team. At Allied Experts, we’ve built a strong reputation for providing dependable HVAC and plumbing services throughout Cherry Hill and South Jersey. Our team helps homeowners create healthier, safer, more comfortable, and more energy-efficient homes through quality products, modern technology, and exceptional service. As an HVAC Installer, you’ll work alongside skilled professionals to install residential heating and cooling systems safely, efficiently, and according to our high standards. You’ll have the support, training, tools, and resources needed to strengthen your skills and build a lasting career in the HVAC industry. If you have a positive attitude, a strong work ethic, and a commitment to quality, we’d love to meet you. Apply today and take the next step in your HVAC career with Allied Experts. What You’ll Do • Install residential furnaces, air conditioners, heat pumps, air handlers, mini-split systems, thermostats, and indoor air quality equipment., • Remove and properly dispose of existing HVAC equipment., • Complete ductwork modifications, refrigerant piping, condensate drainage, venting, gas piping, wiring, and related system connections., • Assist with equipment startup, testing, charging, airflow verification, and commissioning., • Review job documentation, equipment specifications, and installation requirements before beginning work., • Identify and communicate equipment, material, or jobsite concerns promptly., • Follow manufacturer instructions, applicable codes, safety requirements, and company installation standards., • Protect customers’ homes and maintain a clean, organized, and professional jobsite., • Explain basic equipment operation and maintenance information to homeowners., • Complete required job documentation, equipment records, and photos using company software., • Maintain assigned tools, equipment, materials, and vehicle inventory., • Participate in ongoing technical, product, safety, and customer service training.What We’re Looking For, • Previous residential HVAC installation experience preferred., • Knowledge of furnaces, air conditioners, heat pumps, air handlers, mini-splits, ductwork, refrigeration, venting, and related components., • Strong mechanical aptitude and troubleshooting skills., • Commitment to quality workmanship, safety, and code compliance., • Professional appearance and respect for customers and their homes., • Strong communication and teamwork skills., • Dependable attendance, punctuality, and work ethic., • Ability to follow instructions and complete assignments efficiently., • Comfortable using tablets, mobile applications, and field service software., • EPA certification preferred., • Valid driver’s license with an acceptable driving record., • Ability to lift equipment and materials and work in attics, basements, crawl spaces, and outdoor conditions.What We Offer In exchange for your skills and commitment, Allied Experts offers: • Company vehicle, gas card, cell phone, and tablet upon completion of training, • 401(k) with Company Match, • High-quality, affordable Medical, Dental, and Vision Insurance, • Health Savings Account with company contributions, • Company-Paid Short-Term Disability Insurance, • Company-Paid Long-Term Disability Insurance, • Company-Paid Life Insurance, • Paid Holidays, • Paid Time Off, • Parental Leave, • Tuition Reimbursement, • Tool Account, • Safety Shoe Reimbursement, • Employee discounts on a variety of services and entertainment, • Family and friends discounts on company services, • Annual Performance Reviews, • Ongoing Training and Career Development, • Year-Round Work, • Opportunities for AdvancementWhat Success Looks Like Success in this role means completing clean, dependable, and professional HVAC installations while treating every customer’s home with care. You’ll work safely, support your installation team, continue building your technical skills, and help Allied Experts deliver the quality and comfort homeowners throughout South Jersey expect. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Concentric, LLC is the nation’s largest independent industrial power provider, delivering forklift power, critical infrastructure, mechanical/HVAC, and dedicated material handling and automation maintenance solutions. Through a nationwide network of technicians, engineers, and support teams, Concentric understands and prioritizes the unique needs of each customer to maximize uptime, improve operational efficiency, and maintain infrastructure. We provide reliable, scalable solutions that support data centers, telecommunications providers, utilities, manufacturing, distribution, commercial facilities, and other mission-critical environments across America. Job Summary The Field Forklift Technician is responsible for performing routine maintenance on industrial equipment, including but not limited to forklifts, scissor lifts, tuggers, floor scrubbers and golf carts. Must have own tools. Key Job Responsibilities: • Maintain industrial mobile equipment., • Troubleshoot equipment failures, including root cause analysis. Including research of potential warranty, rework and continuously repetitive repairs using historical equipment data available through Field Connect service platform., • Complete all repairs of equipment in a timely manner and by the manufacturer’s repair guidelines., • Judgment and Decision Making - Consider the relative costs and benefits of potential actions to choose the most appropriate course of action., • Inspecting Equipment - Perform audits on equipment audits per the PM Planning tools schedule in Field Connect service platform., • Communications - Provide information to supervisor, co-workers, and subordinates by phone, in writing, e-mail, or in person., • Timely and accurate completion of all work orders and service records per the Concentric time standard., • Maintain accurate and timely entry of work hours in Paylocity time keeping platform. Safety • All work must be completed in a safe manner., • Safety requirements by customer and Concentric must be adhered to., • Work areas will be maintained to ensure safety., • Work areas will be kept clean and organized daily., • Timely Completion of Safety training modules., • Other duties as assigned by supervisor.Requirements: This job might be for you if you have . . . • Must have 10+ years of experience with MHE maintenance (electrical & LP lift truck repair) required., • Strong equipment repair, mechanical and/or electrical skills, • Hydraulics, conveyor experience is a plus, • Self-motivated and ability to manage time and attendance. Must be able to work with minimal supervision., • Strong communication skills to support work order documentation and customer interaction, • Should have some computer skills; familiar with using a computer, • Must be able to lift a minimum of 50 pounds, crouch and/or be able to move in confined areas., • Must be able to meet the physical requirements of a Service Technician., • Must have own tools., • Willingness to learn and be trained, • A valid driver’s license, CDL a plus but not required., • Must be able to pass a background check and drug screen., • Ability to travel extensively., • Ability to work occasional overtime - flexible schedule required. *This job description is subject to change at any time. At Concentric we believe that Our People are what make us great and help us deliver exceptional customer service! We offer industry leading benefits: • Competitive pay – Plus incentive opportunities and overtime potential for our hourly employees!, • Three medical plan options with employer premium contribution that start on day one., • Employee paid dental and vision insurance that starts on day one., • Health Savings Account (HSA) with company contribution on eligible High-Deductible Health Plans (HDHP)., • Medical and dependent care Flexible Spending Accounts (FSA) available., • Company-paid life and AD&D insurance, short-term and long-term disability coverage that start on day one., • Company 401K plan with 100% match on the first 4% of employee contributions., • 8 paid holidays., • Full-time Employees receive a total of 128 Hours of Paid Time Off (PTO) Annually., • We offer employee paid accident, critical illness, and hospital indemnity insurance., • We offer employee paid legal plans, identity protection, pet insurance, and home & auto discounts., • Training and mentoring – Learn from our experts in the industry., • Advancement opportunities. The benefits listed are subject to change at any time. Please speak with an HR Representative for details. In the case of conflict between the information listed and the official plan documents, the plan documents will always govern. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, up to 8 hours; use hands to lift, maneuver, handle, or feel; and talk or hear. The employee frequently is required to walk and reach with hands and arms. The employee is occasionally, required to stand and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 100 pounds. While performing the duties of this job, the employee may be required to wear approved Personal Protective Equipment (PPE) and must maintain a high level of self-awareness about their surroundings. Specific vision abilities required by this job include close vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work is performed primarily in customer facility location. The noise level in the work environment is moderate to heavy, occasionally requiring hearing protection. The Concentric Company considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. #ZTECH #LI-ED1 #LI-hybrid

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations, • 401(k) retirement plan with generous company match Powered by JazzHR 5Z3phLxH8f

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance South Jersey/Philadelphia Area Salary Commensurate with Experience Position Summary The Senior Commercial HVAC Technician is a highly skilled, field-based professional responsible for the diagnosis, service, repair, commissioning, and optimization of complex commercial HVAC systems. This role requires advanced technical expertise, strong problem-solving skills, leadership in the field, and the ability to work independently while supporting operational excellence and customer satisfaction. This position may serve as a technical lead on jobsites and acts as a mentor to junior technicians and apprentices. Essential Functions & Responsibilities Technical & Trade Responsibilities • Diagnose, repair, and maintain commercial HVAC systems, including:, • Rooftop Units (RTUs), • Split systems, • Chillers (air-cooled and water-cooled), • Boilers (hot water & steam), • Cooling towers, • Make-up air units, • VAV systems, • Heat pumps and VRF/VRV systems, • Perform advanced troubleshooting of:, • Electrical systems (single and three-phase), • Motors, VFDs, contactors, relays, and control boards, • Refrigeration systems, compressors, and metering devices, • Read and interpret blueprints, wiring diagrams, schematics, and control sequences, • Commission new equipment and verify proper operation per manufacturer specifications, • Perform system balancing assistance and airflow diagnostics when requiredControls, Controls Interface & Automation, • Troubleshoot and adjust commercial HVAC controls, including:, • Building Automation Systems (BAS), • Thermostats, sensors, and actuators, • Interface with controls contractors and building engineers, • Verify sequences of operation and proper system responsePreventive Maintenance & Compliance, • Perform scheduled preventive maintenance on commercial HVAC equipment, • Complete accurate service documentation, PM reports, and compliance checklists, • Identify and communicate equipment deficiencies and life-cycle replacement needs, • Ensure all work complies with:, • OSHA safety standards, • EPA regulations, • State and local mechanical codes, • Company safety policies and proceduresCustomer Service & Communication, • Serve as a technical representative of the company on commercial job sites, • Communicate clearly with:, • Property managers, • Facility directors, • Building engineers, • General contractors, • Explain system issues, repair recommendations, and preventative strategies in a professional manner, • Provide detailed repair recommendations and estimates when applicableLeadership & Mentorship, • Act as a field leader and technical resource for junior technicians and apprentices, • Provide on-the-job training and guidance, • Promote safe work practices and quality standards, • Support management with technical input on job planning and system evaluationsAdministrative & Technology Responsibilities, • Accurately complete service tickets, work orders, and time entries using company systems, • Document refrigerant usage and compliance logs, • Maintain truck stock, tools, and equipment in good working order, • Communicate job status, delays, and material needs proactivelyRequirements Required Skills/Abilities: Required Qualifications Education & Certifications • High school diploma or GED required, • EPA Universal Certification required, • OSHA-10 (minimum) preferred; OSHA-30 strongly preferred, • State HVAC license or equivalent (where required by jurisdiction)Experience, • 7+ years of commercial HVAC service experience, • Demonstrated experience working independently on complex commercial systems, • Experience mentoring or leading other technicians preferredTechnical Skills, • Advanced electrical and mechanical troubleshooting, • Strong refrigeration diagnostics skills, • Proficiency with test instruments (meters, gauges, combustion analyzers, etc.), • Ability to read and interpret technical documentation and control diagramsPhysical Demands, • Ability to lift up to 75 lbs, • Ability to climb ladders, work on rooftops, and access confined spaces, • Ability to stand, kneel, crouch, and work in varying weather conditions, • Must be able to wear required PPEWork Environment, • Commercial and industrial facilities, • Rooftops, mechanical rooms, and occupied buildings, • Exposure to weather extremes, electrical hazards, moving mechanical parts, and noiseCompetencies & Attributes, • Strong problem-solving and diagnostic ability, • High attention to detail and quality workmanship, • Professional communication and customer-focused mindset, • Leadership presence and team-oriented attitude, • Reliable, punctual, and safety-driven

We are seeking experienced Crew Leaders to work safely in the field for our Enhancement division. You will be a working team member who oversees all aspects of a crew from start to completion. What would my responsibilities be? · Supervise all Enhancement activities of the crew, ensuring that all crew members have the required safety material, the training and tools needed to complete the job, and that they are always operating safely. · Complete a pre-trip inspection report each day. · Coordinate with branch management, customers, and employees as needed. · Use Install tools and operate heavy equipment as needed. Safely drive crews to and from jobs, adhering to the Company's Safety Policy and ensuring that the public will be safe while in contact with crews. · **Candidates with experience in masonry, flat work, pavers, and retaining walls are desired. Why Join Yellowstone? · Competitive hourly pay, paid weekly · Benefits package including health, dental and vision insurance, 401k with a company match · Industry-leading safety programs · Company provided safety gear · Equipped with optimal and most professional equipment · High profile customers, worksites, and landscape results -A company that values and appreciates YOU Requirements · Legal authorization to work in the United States · Experience managing a crew consisting of laborers providing landscaping installation or related services · Must have reliable transportation to the Branch or first job site · Safe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) required · Strong English communication skills. Spanish a plus Become part of the team dedicated to Excellence in Commercial Landscaping

• ROLL HARD, EARN HARD - Top company drivers make up to $90,000/year*, • PAY THAT MOVES YOU - Earn 27% of linehaul + strong weekly take-home*, • SUPPORT THAT RIDES WITH YOU - Strong pay, real perks, and respect on every mile At P&S, we put our drivers first. We hire experienced flatbed drivers and treat them like family, providing higher support, better pay and utmost respect - and clean, comfortable trucks! And it's not just our opinion - in a recent survey of flatbed drivers, nearly 90% confirmed that P&S pays better than other flatbed trucking companies and is better to work for. And drivers agree: in a recent survey, nearly 90% said P&S pays better than other carriers and is a better place to work. Want a driving job where you're valued, supported, and earning more? Fill out a quick form and talk to a recruiter today. • Strong weekly pay. Top company drivers earn up to $90,000 per year, with weekly gross averaging $1,800-$2,000.*, • Percentage pay that rewards you. Make 27% of linehaul, plus tarp pay, detention pay, and layover pay-your effort directly boosts your paycheck.*, • Home when it counts. Get home weekends and enjoy a predictable schedule that balances strong earning potential with real time off., • Driver-friendly freight + support. Haul steady, well-planned freight - including steel coil, pipe + building material loads - with dependable miles and the support you need to stay productive on the road., • $5,000 sign-on bonus*, • Medical, dental, vision, life + short-term disability, • 401(k) with company match, • $5,000 referral bonus, • Free rider + pet program, • Clean, comfortable trucks All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • 1 year of verifiable CDL A OTR experience

This job is posted on behalf of Talent Guide USA by Top Echelon. Excellent Base Pay + Overtime | Paid Door-to-Door Travel | Extensive Training | Outstanding Benefits A leading manufacturer of advanced industrial digital printing technology is expanding its field service organization and looking for experienced Field Service Technicians / Engineers to install, service, and support its high-speed production equipment. This is an opportunity to work with industrial digital printing technology—large, highly automated production systems combining sophisticated electrical, mechanical, electronics, controls, inkjet, and software technology. The company offers excellent compensation, significant overtime potential, outstanding benefits, extensive paid technical training, and long-term advancement opportunities. • Excellent base compensation, • Overtime in addition to base pay, • Paid travel time, • Extensive company-paid technical training, • Outstanding benefits, • Work with some of the industry's most advanced digital printing technology, • Company provides the tools and resources needed to do the job, • Strong technical support organization, • Long-term stability with a major equipment manufacturer, • Opportunities to advance into Senior Field Service, Technical Support, Training, Installation, and Service Leadership, • Opportunity to develop highly marketable skills in industrial digital printing and automation The Field Service Technician will travel to customer manufacturing facilities throughout North America to install, commission, and upgrade, digital printing systems. This is much more technical than traditional copier or office-equipment service. These are large industrial production machines operating in demanding manufacturing environments. You'll work with technology involving: • Electrical and electronic systems, • Motors, drives, sensors, switches, and controls, • PLC-controlled equipment, • Pneumatics, • Mechanical assemblies, • Industrial inkjet systems, • Printheads and ink delivery systems, • Computers, networks, and software, • Material handling and production systems, • Install and commission new equipment at customer facilities, • Perform equipment upgrades and reconfigurations, • Diagnose electrical, mechanical, controls, and software-related problems, • Troubleshoot using electrical schematics, diagnostic tools, and technical documentation, • Replace and adjust mechanical and electrical components, • Perform preventative and corrective maintenance, • Calibrate and optimize equipment for production, • Work directly with customers to resolve technical problems, • Train customer personnel on equipment operation and maintenance, • Document service activities and technical issues, • Coordinate with Technical Support, Engineering, Parts, and other Field Service personnel, • Work independently as well as part of installation teams This is a high-travel field service position and is best suited for someone who enjoys being on the road. Technicians should expect approximately three weeks per month traveling, followed by approximately one week off. Assignments can include installations, upgrades, reconfigurations, and technical service throughout North America. Installation projects may last several days to several weeks, and larger projects can involve teams of multiple Field Service Engineers. If you're looking for a position where you're home every night, this probably isn't the right opportunity. If you enjoy travel, like working on complex equipment, and want the ability to earn additional income through overtime, it can be an excellent career. Previous experience is not required. The company provides extensive training on its equipment and technology. We're interested in technicians with backgrounds servicing or maintaining complex electro-mechanical industrial equipment, including experience with some combination of: Electrical Systems | Electronics | PLCs | Sensors | Switches | Motors | Drives | Pneumatics | Mechanical Systems | Computers | Industrial Controls | Schematics | Troubleshooting Good backgrounds could come from: Printing & Packaging Equipment | Industrial Automation | Converting Equipment | CNC Machinery | Robotics | Semiconductor Equipment | Material Handling | Packaging Machinery | Machine Tools | Production Equipment | Other Complex Electro-Mechanical Machinery Previous Field Service experience is strongly preferred, particularly if you've worked independently at customer locations. This can be an especially attractive opportunity for a Field Service Technician who has reached the limit of what they can learn on their current equipment. The company will provide the training necessary to move into large-format industrial digital printing technology. What matters most is having strong electro-mechanical fundamentals, troubleshooting ability, customer skills, and the willingness to travel. You should be comfortable walking into a customer facility, diagnosing a problem, working through it methodically, and knowing when to involve additional technical resources. This isn't just another break/fix service position. You'll have the opportunity to become a specialist on high-value, sophisticated industrial equipment while developing skills in digital printing, controls, automation, electronics, software, and industrial systems. Strong technicians can continue advancing into Senior Field Service Engineer, Installation Specialist, Technical Support, Training, Applications, and Service Leadership positions. If you're a strong electro-mechanical Field Service Technician who enjoys travel, troubleshooting complex machinery, earning overtime, and continually learning new technology, we'd like to hear from you.

Job Description Position Objective: Represent Advance Scale in wide range of subjects related to the construction aspects of the weighing systems and solutions installation industry. Lead, drive, and prioritize various tasks involving physical labor at foundations for heavy capacity weighing equipment, especially in management of the assigned team. MUST BE ABLE TO WORK OVERTIME, INCLUDING NIGHTS AND WEEKENDS AND MUST BE AVAILABLE FOR FREQUENT OVERNIGHT TRAVEL (typically lasts 3-4 nights on average). Reports to: Owner/ Installation Manager (during training) Position Responsibilities: · Direct team members at all levels of contract administration. · Control any number of projects at various stages of work. · Consults with customers to determine functional and spatial requirements of new truck scale or weighing equipment or modification, and prepares information regarding design, specifications, materials, color, equipment, estimated costs, and construction time along with manufacturers specifications. · Plan layouts of projects and integrates customer’s requirements into unified design for customer review and approval · Partner with Project Manager to maintain schedule of activities and upcoming projects · Directs activities of 3-6 installation team members · Responsibilities include interviewing, hiring and training new employees (as needed) · Planning, assigning and directing work, including scheduling multiple jobs simultaneously · Team performance evaluations and succession planning · Addressing complaints and resolving problems · Ordering material for projects • Assist in the following activities:, • Clean and prepare construction sites to eliminate possible hazards., • Read and interpret plans, instructions, and specifications to determine work activities., • Dig ditches or trenches, backfill excavations, and compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, and rakes., • Measure, mark, and record openings and distances to layout areas where construction work will be performed., • Load, unload, and identify weighing equipment and tools, and distribute them to the appropriate locations, according to project plans and specifications., • Build and position forms for pouring concrete, and dismantle forms after use, using saws, hammers, nails, or bolts., • Lubricate, clean, and repair machinery, equipment, and tools., • Operate jackhammers and drills to break up concrete or pavement. Related Skills: Making Decisions and Solving Problems • Establishing and Maintaining Interpersonal Relationships, • Identifying Objects, Actions, and Events, • Understand construction specifications, • Repair cracks, defects, or damage in installed weighing equipment foundations, • Finish concrete surface, • Read work order, instructions, formulas, or processing charts, • Use measuring devices in construction or extraction work Qualifications: · Ability to communicate effectively both in written format and oral presentation. · Ability to multi-task and establish priorities. · Ability to maintain organization in a changing environment. · Exhibits initiative, responsibility, flexibility, time management, and leadership. · Possess a thorough knowledge of contract administration and office procedures. · Ability to use extensive working knowledge of all paperwork procedures necessary to complete the contract documents to obtain permits and prepare for construction. · Ability to use working knowledge of all consultant work to maintain efficiencies and meet deadlines. · Ability to operate computer to generate and review reports including MS Office software – Word, Excel. · Minimum of 5 years related experience in construction industry. Physical Demands: · While performing the duties of this job, the employee is regularly required to talk or hear. · The employee frequently is required to stand; walk; use hands to finger, handle, or feel; and reach with hands and arms. · The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch, or crawl. · The employee must frequently lift and/or move up to 30 pounds and occasionally lift and/or move up to 50 pounds. · Specific vision abilities required by this job include close vision; distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: · Frequently exposed to fumes or airborne particles and vibration · Exposure to a variety of extreme conditions at office and construction job site · Frequently exposed to loud worksites · Duties are performed offsite at customer facilities and may require compliance with OSHA policies and the use of required safety apparatus and equipment. \nCompany Description Our customer relationships have been the foundation on which our second generation family business has grown since 1973, when ADVANCE was founded by Jim and Sheila Santarpio. Since then, dedication, professionalism, and integrity have positioned us as a leading provider of weighing system solutions throughout the Mid-Atlantic region and Northeast corridor. Recognizing how changes within the weighing industry affect your daily operations, we structured our offerings into four key divisions. These divisions are designed to function independently of, or in conjunction with each other; providing you access to all of ADVANCE’s services. Furthermore, each area is handled exclusively by technically trained ADVANCE personnel. ADVANCE is dedicated to providing the highest quality weighing systems, services, technology, and technical support and is committed to exceeding our customer’s expectations. ADVANCE incorporates its ISO Quality Management System at all levels of engagement to ensure continual process improvement. Our customer relationships have been the foundation on which our second generation family business has grown since 1973, when ADVANCE was founded by Jim and Sheila Santarpio. Since then, dedication, professionalism, and integrity have positioned us as a leading provider of weighing system solutions throughout the Mid-Atlantic region and Northeast corridor.\r\n\r\nRecognizing how changes within the weighing industry affect your daily operations, we structured our offerings into four key divisions. These divisions are designed to function independently of, or in conjunction with each other; providing you access to all of ADVANCE’s services. Furthermore, each area is handled exclusively by technically trained ADVANCE personnel.\r\n\r\nADVANCE is dedicated to providing the highest quality weighing systems, services, technology, and technical support and is committed to exceeding our customer’s expectations. ADVANCE incorporates its ISO Quality Management System at all levels of engagement to ensure continual process improvement.

Job DescriptionIMMEDIATELY HIRING! INTERVIEWING NOW for Production Workers located in the Philadelphia, PA area looking for FULL TIME job opportunities. The Production Worker will be responsible for working in a food manufacturing/ production environment, working in the production area dumping the bags of ingredients into the production machines to be processed. Other skills include operating the forklift to move the bags of material to and from the production lines, following cGMP policies and procedures, and lifting the bags weighing up to 50lbs on a consistent basis. We do offer WEEKLY PAY and LONG TERM opportunity. Please review the information below and if interested please apply by submitting your resume with the best contact information for us to reach out and speak further on next steps in the hiring process. Responsibilities • Prepare and inspect orders before dispatching to customers., • Check labels, codes, and apply stickers accurately., • Load pallets in the correct direction and ensure cleanliness., • Lift and maneuver bags of cocoa beans and butter weighing up to 50lbs and 35lbs respectively., • Utilize new technology to assist in lifting and dumping materials into machines., • Operate within a consistent work area for 12-hour shifts. Essential Skills • Food manufacturing experience., • Packing and general production skills., • Machine operation and assembly line experience., • General labor capabilities. Job Type & Location This is a Contract to Hire position based out of Philadelphia, PA. Pay and Benefits The pay range for this position is $19.00 - $20.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Philadelphia,PA. Application Deadline This position is anticipated to close on Oct 3, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Soldering Technician, PCB ($15.49 - $20) class 2 ($20 - $25) Class 3 • Experience in IPC-A-610, Class 3 and J-STD-001 criteria, • Certification to IPC / J-STD preferred, • Solder Surface Mount and Through Hole Components on Printed Circuit Boards, • Experienced in working with a microscope, • Expected to read process documentation including; Bills of Material and Assembly drawings

Job DescriptionAbout the Role:Cabinet Design Center is expanding and looking for a creative and motivated Kitchen Designers to join our team in Voorhees, NJ! This is an exciting opportunity to bring clients' dream kitchens to life by combining your design expertise with top-quality cabinetry solutions. If you have a passion for interior design and a knack for turning spaces into something special, we want to hear from you! Responsibilities: • Consult with clients to understand their vision, needs, and budget for kitchen design projects, • Create detailed kitchen layouts and 3D renderings using design software, • Select and present cabinetry, hardware, countertops, and finishes to clients, • Prepare accurate measurements, project quotes, and material specifications, • Collaborate with contractors and installation teams to ensure seamless project execution, • Manage multiple design projects simultaneously from concept through completion, • Stay current on kitchen design trends, cabinetry products, and industry innovationsRequirements:, • Prior experience in kitchen design, interior design, or cabinetry sales preferred, • Proficiency in kitchen design software such as 2020 Design, Chief Architect, or similar, • Strong understanding of cabinetry construction, materials, and installation processes, • Excellent communication and client-facing skills with a consultative sales approach, • Ability to read and interpret architectural plans and measurements accurately, • Highly organized with strong attention to detail and project management abilities, • Associate's or Bachelor's degree in Interior Design or related field is a plusAbout Us:Cabinet Design Center, a division of CRD Construction Inc., has been a trusted name in kitchen and bath design in the Voorhees, NJ area. Our customers love us for our personalized approach, premium product selections, and commitment to turning their vision into reality. Our team thrives in a collaborative, creative environment where great design and craftsmanship are always the top priority.

Job Description Overview We’re looking for a reliable Construction Pipe Crew Laborer with 3-5 years of experience to join our team working on site work and utility projects across New Jersey. The ideal candidate brings solid hands-on experience on relevant projects and a strong work ethic. We prioritize safety and professionalism on every job site. Responsibilities • Assist foreman/management in planning and coordinating daily field crew construction activities., • Track and report daily progress, material usage, and safety concerns/incidents, • Communicate with the Foreman and Equipment Operator to complete tasks efficiently and inform supervisors of any potential delays or project risks., • Coordinate timely receipt of materials with vendors, foreman/management and office personnel to ensure project stays on schedule, • Lay out, install and connect underground piping systems (water, sewer, storm)., • Perform system connections, including wet taps and tie-ins, to existing infrastructure., • Use pipe-laying tools and equipment to accurately execute pipeline layouts and connections according to approved construction drawings., • Supervise and/or operate equipment to excavate, trench and backfill to the specified depth and grade in accordance with approved drawings and OSHA guidelines., • Follow all OSHA safety procedures, shoring standards, and utility markout protocols., • Maintain a safe and secure job site at all times. Qualifications • Knowledge of and ability to operate heavy equipment such as dozers, loaders, and excavators., • Familiarity with utility locating methods and pipeline installation processes., • Able to work well with a team and communicate effectively with jobsite supervisor and crew., • Able to perform physically demanding work, including extended standing and lifting materials., • OSHA 10 and/or 30 certification is a plus. Salary details • $20 to $35/hour depending on experience, • Overtime eligible, • Full-time employment

Job DescriptionJob description: Woodland Building Supply is a trusted provider of high-quality building materials, serving builders, home remodelers, and commercial property managers. With over 50 years of industry experience, we pride ourselves on exceptional service, fast deliveries, and expert product knowledge. WHAT WE OFFER: • Full-time employment, • Health, dental, and vision insurance, • Paid time off, • Opportunities for advancement and career growth!ABOUT THE POSITION: We’re looking for a reliable and hardworking Lumber Yard / Warehouse Associate to join our team. This is a hands-on role that involves physical work, operating equipment, and helping customers get what they need. If you’re experienced, dependable, and ready to work in a fast-paced, outdoor environment—we want to hear from you! ESSENTIAL DUTIES & RESPONSIBILITIES: • Material Handling: Load and unload lumber and building materials from trucks and assist in storing them in the appropriate locations within the yard., • Inventory Control: Monitor and maintain accurate inventory levels, including conducting regular counts and reporting any discrepancies., • Customer Service: Assist customers in locating and selecting the products they need, providing guidance, and ensuring their overall satisfaction., • Quality Assurance: Inspect materials for defects and ensure they meet quality standards before being distributed to customers., • Equipment Operation: Safely operate forklifts, pallet jacks, and other equipment to transport and organize materials., • Safety Compliance: Adhere to all safety regulations and protocols, including the use of personal protective equipment (PPE), to maintain a safe work environment., • Yard Maintenance: Keep the lumber yard clean and organized, including sweeping, removing debris, and maintaining a well-organized workspace., • Teamwork: Collaborate with colleagues to achieve common goals and assist in other areas of the lumber yard as needed., • Communication: Effectively communicate with team members, supervisors, and customers to ensure the smooth flow of operations.REQUIRED EXPERIENCE & QUALIFICATIONS: At least 1 year of experience in: • Operating a forklift, • Working as a general laborer or in a warehouse, • Construction or building supplies (knowledge of lumber, tools, or related materials is a plus), • Providing customer service, demonstrating strong communication and problem-solving skillsAdditional Requirements:, • High school diploma or equivalent, • Valid U.S. Driver License, • Ability to lift heavy objects and perform physically demanding tasks, • Strong attention to detail and organizational skills, • Commitment to safety, • Excellent customer service and interpersonal skills, • Basic math skills and the ability to learn a point-of-sale (POS) systemPreferred:, • Previous experience in a lumber yard or similar setting, • Forklift operation certification (training may be provided), • Spanish-speaking abilityWORKING CONDITIONS:, • This position requires year-round outdoor work and exposure to various weather conditions., • Prolonged periods of standing, walking, and heavy lifting is common in this role., • Weekend and flexible hours may be required to meet customer demand.HOW TO APPLY:, • To be considered, you must submit a current/updated resume via Indeed—either by using your Indeed resume or uploading your resume., • You’ll also be asked to answer a few short questions about your experience/skills. Please make sure your answers match what’s listed on your resume., • Resumes sent via email will NOT be reviewed.Woodland Building Supply is committed to the principles of equal employment opportunity and will not discriminate against any employee or applicant on the basis of age, color, disability, gender, national origin, race, religion, sexual orientation, veteran status, or any classification protected by federal, state, or local law. Job Type: Full-time Benefits: • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Professional development assistance, • Vision insurancePeople with a criminal record are encouraged to apply Experience: • Forklift: 1 year (Required), • Construction or Building Supplies: 1 year (Required), • Customer Service: 1 year (Required), • General Laborer or Warehouse: 1 year (Required)Language:, • Spanish (Preferred)License/Certification:, • U.S. Driver License (Required), • and active Forklift Certification (Preferred)Work Location: In person

Job DescriptionJob Title: Paving Laborer Job Summary: We are seeking a highly motivated and reliable individual to join our team at US Outworkers as an Asphalt Maintenance / Paving Team Member. In this role, you will be responsible for assisting in the installation and repair of asphalt and concrete surfaces for both residential and commercial clients. The ideal candidate will have previous experience in the asphalt / construction industry and possess physical strength and endurance to carry out physically demanding tasks. As a new team member, you will work closely with our team of professionals to ensure the successful completion of various paving projects. Key Responsibilities: • Assisting in the preparation of worksite by removing debris, marking boundaries, and setting up necessary equipment., • Measuring and marking surfaces for asphalt or material placement., • Applying crack sealing material, asphalt, and other materials to project surfaces., • Operating various equipment such as jackhammers, pavers, seal coating machines, crack kettles, etc., • Assisting in the maintenance and repair of maintenance / paving machinery., • Maintaining a clean and organized worksite., • Following safety protocols and participating in safety meetings., • Communicating effectively with fellow team members to ensure efficient project completion., • Occasionally operating heavy machinery, such as trucks and loaders. Qualifications: • High school diploma or equivalent.

Standard Job Description\n \n \nEnsure the compliance of parts and assemblies to contractual requirements by performing first article, in process and final mechanical inspection through the use of drawings, processes, wire connection lists, mil specs and work instructions in conjunction with hand tools and measuring equipment. Properly document and disposition defects found during mechanical inspections and communicate results to the responsible activities for use in root cause analysis and corrective action implementation. Familiarity with the use of PC based applications used in defect reporting. Interpret and execute working level policies and procedures to ensure contractual and ethical compliance. Assist in the identification, documentation, control and disposition of non conforming material. Ability to work in a team environment with minimal supervision. May be requested to climb to perform their job responsibilities.\n \n \nUS citizenship is required.\n \n Basic Qualifications\n \n \n\n • Ability to read and interpret detailed Drawings/Wire Connection Lists/Military Specifications.\n, • Proficient in the use of hand precision measuring tools.\n, • Ability to identify and disposition non conforming material.\n, • Ability to understand and identify workmanship deviations from requirements.\n, • Familiarity with the use of PC based applications used in defect reporting.\n, • US citizenship is required\n, • Ability to obtain a security clearance\n\n \n Desired Skills\n \n \n\n • Ability to read and interpret detailed Drawings/Wire\n, • Connection Lists/Military Specifications\n\n \n Pay Information \n \n\n • $35.00 - $35.00\n\n \nAt Lockheed Martin, we know mission success starts with taking care of our people. Our Total Rewards program is designed to attract top talent, support your well-being, and help you grow-both professionally and personally.\n \n \nThe salary range for this position is as listed on the requisition. Please note that the salary information listed is a general guideline only. \n \nLockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market(work location) and business considerations when extending an offer. \n \n Benefits offered: Medical, Dental, Vision, Flexible work arrangements and schedules (e.g., 4x10), 401(k) match, Paid time off, Holidays, Parental Leave, EAP, Flexible Spending Accounts, Education Assistance, Life Insurance, Short-Term Disability, and Long-Term Disability.\n \n\n • Additional specific benefits are dependent upon the business unit and the collective-bargaining agreement.\n, • Annual short-term and/or long-term incentive compensation programs may be offered depending on the position. Payments under these annual programs are not guaranteed and can vary from year to year and are tied to a range of performance metrics.\n, • For (Washington state applicants only) Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.\n

Job DescriptionOverview:Phillywide Waste Services is Now Hiring Commercial Rear Load Garbage Truck Drivers! Class A or B license required - with at least 2 year CDL driving experience Location: Philadelphia Pa Hourly Pay Rate: $30./Hour Schedule: Monday - Saturday Safety is our first Priority! In order to be considered, please include your resume when applying Highlights: • Monday thru Saturday, • Early Start Time: 4am, • Hourly pay of $30. -time and 1/2 pay after 40 hours in a work week., • 2 Year verifiable CDL experience required, • Benefits Package Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.:Job Highlights: • Drivers are Responsible for Safely Operating Rear-Loading Trucks, for the Pick-Up Service of Bags or Containers Filled with Waste or Recyclable Material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift, • Drivers Transport the Material to a Disposal, Transfer or Recycling Facility, & May Make One or More Trips Throughout the Shift, • We Deploy Newer Automatic Trucks, • The Driver Position May Be Required to Repeatedly Lift up to 50 Pounds, & Move & Maneuver up to 100 Pounds, As Well As Mount & Dismount the Truck Multiple Times Every RouteRequirements and Qualifications::Requirements:, • 21 Years of Age & Legally Eligible to Work in the United States, • Valid Class A or B CDL, • Airbrake Endorsement, • 2-year CDL driving experience in the last 7 years., • Great Safety Record and Clean MVR, • Experience as a Driver or Helper for a Refuge Company is Highly Preferred, • Working Knowledge of DOT, OSHA & Applicable Traffic Regulations, • Ability to Speak & Read English to Converse with the General Public, understand Highway Traffic & Signals, Respond to Official Questions & Make Legible Entries on Reports & Records, • Read & Understand a Map, • Meet Physical & Safety Requirements of the Position., • Willing & Able to Work Required Worked Hours as Allowed Under DOT Regulation & May Include Weekend, Night &/Or Holiday WorkAdditional Job Requirements:, • Routes may require Drivers to navigate through congested communities and confined or tight areas in city locations., • Highly skilled backing maneuvers are essential to successfully perform this job., • Our drivers routinely climb in and out of the truck cab to service customer accounts., • Driver pre and post inspections required. Drivers are responsible for ensuring their truck is in compliance with PHILLYWIDE safety standards as well as OSHA and DOT regulations, and local traffic laws, prior to and while operating the vehicle.Additional Information:Phillywide is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.Salary Range Minimum: USD $30/Hr. to start

Job Description TransAm Trucking Company Truck Driver Jobs TransAm Trucking is now hiring company CDL-A truck drivers for long-haul career opportunities! Apply today and enjoy life on the road with competitive pay and benefits, top-of-the-line equipment, and plenty of great driver rewards: TransAm Trucking Company Truck Drivers Enjoy: • Starting pay rate from $0.45/mile to $0.65/mile, loaded and empty* (Includes per diem), • We reward safety early and often—starting with a raise after your first 30 days if you stay accident-free and maintain a high safety score. From there, pay increases are reviewed bi-annually, giving you the opportunity to grow your earnings through safe, consistent driving., • Weekly guarantee for working full schedule*, • Detention Pay, • Runs nationwide, • Bonus opportunities, layover pay, and stop pay, • SAP Friendly, • Medical, dental, and life insurance options, • 401(k) retirement plan, • Top-of-the-line late-model equipment TransAm Trucking Company Truck Driver Job Requirements: • Valid CDL-A, • Must have at-least 3 months of verified tractor-trailer driving experience, • Minimum 21-years-old *Starting pay is dependent on verified safe driving experience. This position includes for per diem. Terms and conditions apply. Contact TransAm for details. **Pay rate increases are based on maintaining accident-free and maintaining a high safety score. Terms and conditions apply. Contact TransAm for details. *May be eligible for a guaranteed gross weekly pay amount for working a full schedule, not being responsible for any service failures, and no preventable accidents. Continued employment through the date of payment is a material condition of eligibility and a condition precedent to earning the incentive. Driver must complete 30 days of employment before he or she is eligible for the guaranteed weekly gross pay. Other terms and conditions apply. Contact TransAm for details. All amounts stated herein represent gross pay, subject to Federal, state, and local tax and other withholding requirements. Pay rates and terms of employment are subject to change. Nothing contained herein is any warranty or guarantee of employment for any length of time or the amount that an individual will earn. There are many factors that can significantly affect the amount an employee will earn and the success of an individual. TransAm Trucking is an Equal Opportunity Employer.

Job Description???? Assembler / Laborer | 1st Shift Position: Assembler / Laborer Shift: 1st Shift (6:00 AM - 2:30 PM) Schedule: Monday - Friday Employment Type: Full-Time Key Responsibilities • Perform assembly and finishing work on a production line., • Read and follow blueprints, work instructions, and assembly specifications., • Assemble components using hand and power tools., • Position, align, and secure parts during the assembly process., • Attach pre-manufactured components and hardware to finished products., • Drill holes, install fasteners, and perform mechanical assembly tasks., • Load and unload materials from trucks and transport equipment., • Operate forklifts, hoists, lift beams, and other material handling equipment., • Move raw materials and finished products throughout the facility., • Conduct quality checks to ensure products meet specifications., • Maintain a clean, organized, and safe work environment., • Assist with production goals and daily manufacturing operations.Required Qualifications, • Experience in assembly, manufacturing, production, or general labor., • Ability to read and follow blueprints and assembly instructions., • Experience using hand tools and power tools safely., • Ability to lift up to 50 lbs regularly., • Strong attention to detail and quality., • Reliable attendance and positive work ethic., • Ability to stand and work throughout the shift.Preferred Qualifications, • Experience with grinders, impact guns, circular saws, and other power tools., • Forklift or material handling equipment experience., • Basic painting or touch-up experience., • Mechanical aptitude and manufacturing experience., • Bilingual skills are a plus.Work Environment, • Clean and organized manufacturing facility., • Non-climate-controlled environment., • Primarily standing and active work throughout the shift., • Team-oriented production setting., • Rotation between tasks and workstations.Benefits Health Insurance Dental Insurance Vision Insurance Life Insurance Options Long-Term Disability Coverage Flexible Spending Accounts (FSA) Employee Assistance Program (EAP) Paid Time Off (PTO) Paid Holidays Bereavement & Jury Duty Leave Why Join Us? • Stable full-time opportunity on a consistent 1st shift schedule., • Comprehensive benefits package., • Clean and supportive work environment., • Opportunities to learn new skills and grow within manufacturing operations., • Collaborative team culture with long-term career potential. ???? Apply today if you have experience in assembly, manufacturing, construction, production, or general labor and are looking for a long-term career opportunity! Job Type & Location This is a Contract to Hire position based out of Cinnaminson, NJ. Pay and Benefits The pay range for this position is $20.00 - $20.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cinnaminson,NJ. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionHere at Global- a 1st Flagship Company (www.globalfirstflagship.com), a woman-owned small business, we believe in Individual Accountability, Growth, Integrity, and Respect. We are a leader in Marine Support Services and Emergency Management. Serving as the Department of Navy's trusted Prime Contractor since 1964, we embark on a thrilling mission, managing, operating, and maintaining the U.S. Navy Inactive Ship fleet across diverse locations, including Norfolk, Philadelphia, Bremerton, California, and Hawaii. The journey begins here, and we invite you to set sail with us and make a real impact in our dynamic and innovative work environment!Buckle up for an adrenaline-fueled journey on military vessels such as destroyers, aircraft carriers, and an array of other awe-inspiring Navy vessels! Your golden opportunity for an exhilarating career is knocking - are you ready to answer the call? The journey begins here - with Global- a 1st Flagship Company, we are currently looking for a Hazardous Material Technician.What You'll Be Doing:Conducts monthly and annual vessel and facility Workplace Safety/Hazard Inspections.Conducts daily waterfront inspections for safety and environmental hazards.Identifies workplace hazards and conditions and takes appropriate action to ensure a safe workplace.Investigates, prepares, and forwards reports on Safety and Environmental related accidents and near-misses.Conducts hot work inspections and safety inspections of oil, hazmat, ballast and rainwater pumping operations.Conducts safety and environmental inspections of asbestos and preservation operations.Conducts atmospheric testing for safe personnel entry and hot work in enclosed and confined spaces.Identifies, collects and performs sampling and analysis of hazardous materials and waste such as oil, oily water, asbestos, PCBs, lead and mercury.Conducts heat stress monitoring and noise surveys.Identify and repair shipboard insulation discrepancies.Perform shipboard mold abatement.Responsible for the facility's hazardous and non-hazardous waste storage and disposal, including operating the Hazardous Waste Accumulation Area.Responsible for pre-designation of waste prior to generation and disposal.Prepares reports of safety inspections and discrepancies.What You'll Need to Succeed:Minimum Qualifications:Shall have a working knowledge of various safety, environmental, hazardous material and hazardous waste regulations to ensure that safety and environmental laws are adhered to.Two years of education related to hazardous material career field and two (2) years of relevant hazardous material experience or relevant experience in the military.Must have general computer skills and Microsoft Office program skills.Must have a current driver's license and meet the requirements of the company's Vehicle Safety manual.Must satisfactorily complete the following qualifications/certifications within specified time period per Offer Letter:Shipyard Competent Person (gas-free) certificationAHERA Building Inspector Certification40-hour HAZWOPER CertificationForklift operatorMedically qualified and able to wear a negative pressure respiratorPreferred Qualifications:Bachelor's Degree in related field, and two (2) years of education related to the hazardous material career field and two-years of relevant hazardous material experience or relevant experience in the military.OSHA 10-hr. and 30 hr. Maritime Card.Trained in sampling and analysis of wastewater per OPNAVINST 5090.1(series).Benefit Highlights Include:Comprehensive Medical (Blue Shield PPO), Dental, and Vision Insurance11 Paid Holidays Per Year17 Days PTO/Sick Time Per YearMatching 401K (50% Match up to 8%)Employer Paid Life Insurance & Short Term/Long Term DisabilityTuition ReimbursementEmployee Assistance Plan (EAP)Pet Insurance Global- a 1st Flagship Company is an E-Verify and is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, gender expression, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Job Posted by ApplicantPro

Job DescriptionDescription: Tague Lumber is seeking experienced Sales Professionals with in-depth knowledge of the building materials industry. At Tague, we are not only dedicated to helping our customers with their building projects; we help our employees to build their careers. As a market leader in the building materials industry, we are committed to hiring and developing talented professionals who can deliver to our customers the quality service Tague Lumber, Inc. has built its reputation on for four generations. We have locations to serve our customers throughout the Philadelphia Metropolitan area. Our Sales Representatives work cooperatively to maintain a solid customer base, grow existing customers, and obtain new customers by promoting Tague’s goods and services. They will also be responsible to meet and exceed monthly sales quotas at the appropriate gross margin while increasing customer satisfaction. Requirements: • Experience in the building materials industry is required, • Must have a valid driver’s license, • Ability to quickly and thoroughly learn product information and technical concepts, • Experience interacting with customers and researching product options, • Must be comfortable selling company products, • Must be willing to take ownership and responsibility for all assigned tasks, • The ability to fulfill responsibilities quickly and accurately, • Ability to work with team members from all company departments, • Work on-site Monday - Friday Why Join Us? You'll become part of a well-established, customer-focused company that values teamwork, integrity, and exceptional service. We offer a collaborative work environment where your expertise is appreciated and your contributions directly impact our customers' success. If you're looking for a rewarding sales career with opportunities to build lasting customer relationships and grow professionally, we'd love to hear from you. Requirements:

Job Description Are you looking to work at a growing company where your contribution will have a significant impact? Come and join an established market leader, that offers exceptional growth potential, with the opportunity to manage a North American distribution network alongside a passionate team. THE POSITION Reporting to the Market Director, the Field Sales Representative - B2B’s mandate is to deliver sustainable growth by providing field support to Damotech’s Dealer Network, National Accounts, and lead opportunities. • Maintain and develop strong customer relations through excellent service, • Support the dealers/customers with sales activities, • Upsell Damotech products and services to various partners, • Conduct rack safety surveys to generate products and service quotes, • Engage in initiatives to develop the region DAMOTECH Ranked in the Growth 500, Damotech is the largest provider of pallet repair & protection solutions, software and engineering in North America. Over half of Fortune 500 companies trusts us to make their warehouses safer. Requirements • 3+ years of experience in sales or operations management in a client-facing role, • Experience using a CRM system, • Eligible to work in the United States, • Able to travel within New Jersey, New York, Pennsylvania, and Delaware about 75% of the time, including day trips and overnight trips, • Experience in B2B sales within the material handling, warehousing, or a related industry would be an asset, • Experience working with dealers would be an asset Benefits • A competitive salary (75,000-100,000 USD/year), • Unparalleled training and career development opportunities, • A corporate culture based on collaboration, dedication, innovation, efficiency, and happiness at work, • Health Insurance, • 401(k)

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, wireless communication and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, Talley and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a Counter Sales Representative to join our Warshauer Electric Supply team in Woodbury, NJ! Summary: The Counter Sales Representative is a resource for immediate service and product knowledge for our customers. Provides excellent customer service by assisting customers promptly and courteously with their purchases and efficient processing of their orders. Works closely with the branch team to assist in receiving, shipping, and stocking. What You'll Do: • Provide excellent customer service by assisting customers promptly and courteously with their purchases and processing of their orders or returns, • Assist in driving electrical distribution sales for our counter business and developing new and existing customer relationships, • Stay informed and educated on product knowledge, • Inform manager of any potentially hazard or elevated situation pertaining to safety or the satisfaction of a customer, • Assist with daily restocking, showroom maintenance, and keeping showroom and counter clean and organized, • May be required to perform other job functions within a branch when required including but not limited to inside sales, preparing and filling orders and/or receiving, stocking, staging, and shipping material, and maintaining branch equipment, • May be required to make deliveries up to 20% of the time, • Perform other duties as assigned Job Duties Disclaimer: The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all responsibilities, duties, knowledge, skills, and abilities needed to perform the job. Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time. The ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrate commitment to effective customer service delivery, integrity, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Rexel USA. Qualifications What You'll Need • 2+ years of customer service, sales, or electrical distribution experience preferred, • Previous branch experience preferred, • Certification to operate forklift, hand truck, pallet jack, and other warehouse equipment preferred, • If required to drive:, • Must have a valid driver's license, • Must be at least 21 years of age, • Must pass a pre-employment and annual review of the Motor Vehicle Record, • Must obtain verification of non-expired medical certificate as required by law within 30 days of hire, • Must not have had a suspended driver's license for a traffic accident/violation within the past 3 years, • Must not have any at fault accidents in the past 3 years, • High School or GED - Required Knowledge, Skills & Abilities • Electrical product knowledge and experience, including lighting, switchgear, controls, and electrical commodities preferred, • Demonstrated knowledge and experience of electrical distribution or other electrical sales environments preferred, • Familiarity with automated order entry systems & PCs running Windows-based software preferred, • Strong negotiation and interpersonal skills, including the ability to communicate on all levels within internal and external groups, • Strong written and verbal communication skills, • Good team player, • Strong organizational skills, • Ability to work efficiently and meet tight deadlines, • Ability to type on a computer keyboard, • Great attitude, • Desire to improve electrical product knowledge Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Frequently – 21% to 50%, • Walk: Must be able to move about inside/outside office or work location - Constantly – at least 51%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Constantly – at least 51%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Talk, hear, taste, smell: Must be able to use senses to effectively communicate with co-workers and clients and detect hazardous conditions - Constantly – at least 51% Weight and Force Demands: • Up to 10 pounds - Constantly – at least 51%, • Up to 25 pounds - Frequently – 21% to 50%, • Up to 50 pounds - Occasionally – up to 20% Working Environment: • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - Occasionally – up to 20%, • Handles or works with potentially dangerous equipment - Occasionally – up to 20% Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law. For the state of New Jersey only, the pay range is $20.00 to $22.00, depending upon qualifications, experience and other considerations permitted by law. Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job Description Now Hiring: Packaging Associates / Line Workers Location:Camden, NJ Pay Rate: $15.92/hr Schedule: Monday–Friday Shift: PM Shift- 4:15 PM -12:45 AM Job Summary We are seeking dependable and hardworking Packaging Associates / Line Workers to join our production team in Camden, NJ. In this role, you will work on a fast-paced packaging and production line, assisting with the packaging, labeling, assembling, inspecting, and preparation of products for shipment. The ideal candidate is reliable, detail-oriented, comfortable working on their feet, and able to maintain a consistent production pace while following quality and safety standards. Key Responsibilities • Operate and work alongside production and packaging lines., • Package products according to customer specifications and production requirements., • Place products into containers, boxes, bags, or other designated packaging., • Assemble, fill, seal, label, and prepare products for shipment., • Inspect finished products for quality, accuracy, proper labeling, and packaging., • Identify and report damaged, defective, or incorrectly packaged products., • Count and verify products to ensure correct quantities., • Feed products or materials onto the production line as needed., • Monitor the production line and maintain a steady workflow., • Remove completed products from the line and place them into boxes or designated containers., • Stack and organize finished products and packaging materials., • Assist with case packing, palletizing, and preparing products for shipping., • Follow work instructions, customer specifications, and production procedures., • Maintain a clean, organized, and safe production area., • Follow all company safety, quality, and sanitation requirements., • Work cooperatively with team members, leads, and supervisors to meet daily production goals., • Perform other production, packaging, warehouse, and material-handling duties as assigned. Qualifications • Previous experience in packaging, manufacturing, production, assembly, warehouse, food production, or material handling is preferred but not required., • Ability to work in a fast-paced production environment., • Ability to stand and walk for extended periods during the shift., • Ability to perform repetitive hand and production-line tasks., • Ability to lift and move products or materials weighing up to 20 lbs. as needed., • Strong attention to detail and commitment to product quality., • Ability to follow written and verbal instructions., • Reliable attendance and punctuality are essential., • Ability to work effectively as part of a team., • Positive attitude and strong work ethic.

Job Description At Ace Designs, we love what we do! For over 35 years, we have been in the retail display business where we have established an outstanding reputation for quality and service. Our clients range from large retail chains to smaller boutiques, which allows us accommodate projects big and small. We pride ourselves on being leaders in ingenuity and problem solving as well as delivering on time and on budget. Our products are all custom and manufactured in our building, so we get to see our concepts come to life on a daily basis. Every day we make the impossible possible with our outstanding design and production team. To learn more about us visit our website at www.AceDesigns.com. Responsibilities: · Receiving and storing: Receive materials, inspect them for damage, and move them to their designated locations. Fill out and turn in all appropriate paperwork. · Loading and unloading: Load and unload trucks, packages and shipments by hand, pallet jack or forklift. · Organizing: Organize inventory and ensure materials are available at all times · Tracking: Maintain accurate inventory records and document orders and transactions · Operating machinery: Operate forklifts, pallet jacks, and hand trucks to move materials · Safety: Ensure all safety procedures are followed · Communication: Communicate with others to ensure material is moved as needed · Cleanup: Moving of recycling bales with forklift, dumping (3) hopper dumpsters around building with forklift · Box Making: Operation of our box making and glue machines. · Packing: Work within the shipping line with a team to pack displays. Skills needed: · Attention to detail · Organizational proficiency · Knowledge of safety practices · Ability to work independently and as part of a team · Forklift certification is a plus, but on-site certification and training is available. · Knowledge of large format digital print media is a plus but not required. MUST HAVE · Have a valid driver’s license & a good driving record · Have reliable transportation to get to our location in Bristol, PA We are a company that values our employees and work in a team environment. There are also opportunities for growth within the company. To apply, please send a copy of your resume. We are a drug free environment and require drug screening prior to employment. \nCompany Description For over 35 years, we have been in the manufacturing of retail display business where we have established an outstanding reputation for quality and service. Our clients range from large retail chains to smaller boutiques, which allows us to accommodate projects big and small. We pride ourselves on being leaders in ingenuity and problem solving as well as delivering on time and on budget. Our products are all custom and manufactured in our building, so we get to see our concepts come to life on a daily basis. Every day we make the impossible possible with our outstanding design and production team. To learn more about our exciting work visit our website at www.AceDesigns.com. For over 35 years, we have been in the manufacturing of retail display business where we have established an outstanding reputation for quality and service. Our clients range from large retail chains to smaller boutiques, which allows us to accommodate projects big and small. We pride ourselves on being leaders in ingenuity and problem solving as well as delivering on time and on budget. Our products are all custom and manufactured in our building, so we get to see our concepts come to life on a daily basis. Every day we make the impossible possible with our outstanding design and production team. To learn more about our exciting work visit our website at www.AceDesigns.com.

Job Description Körber Pharma Packaging Materials; A global leader of high-quality folding cartons and literature for the pharmaceutical industry is in search of Material Handlers who are interested in working with a fast growing company. Duties: • Operator Forklift and and Hand Jack, • Monitor packing quality and accuracy, maintaining accurate counts and load ticket paper work, • Assist mechanic as needed, • Stage material, • Perform stripping duties as necessary, • Read and understand job jackets, • Use information to ensure production is run according to specifications, • Keeps all waste and scrap within company guidelines, • Assist in any other duties assigned Requirements: • Must be able to communicate and follow both verbal and written instructions, • Operate a Forklift and Hand Jack, • Capable of lifting (35 lbs) pull and push bundles frequently., • Able to work 12 hour shifts, • Ability to work from per-determined quality standards, • Able to complete production documentation Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Körber Pharma Packaging Materials is an Equal Opportunity Employer that offers a comprehensive benefit package including Medical, Dental, STD/LTD, Vision, Life Insurance and 401(k) in addition to Paid Time Off and holidays.

Job DescriptionBenefits: • 401(k), • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Training & development, • Vision insurance Company Information Ricochet is an industry leading manufacturer of sophisticated, high-tech Personal Protective Equipment (PPE) that focuses on protection, performance, and comfort. Ricochet has been headquartered in Philadelphia, Pennsylvania for over 20 years, with all manufacturing and operations located in a single master facility. In addition to serving the United States Military, Ricochet serves customers in multiple sectors of public safety by providing custom engineered PPE including EMS gear for the Philadelphia and Honolulu Fire Departments, Technical Rescue gear to all FDNY Rescue and Squad companies, and structural/turnout gear to multiple Fire Departments throughout the United States and beyond. Ricochet is a long-standing member of FEMSA. For more information, visit ricochet-gear.com. Job Summary We are seeking a skilled Cutting Machine Operator to join our manufacturing team focused on producing high-quality protective garments. The ideal candidate will operate Lectra/Gerber and other automated cutting machines, manage material usage, and support inventory control. This role requires attention to detail, basic mechanical aptitude, and the ability to work a flexible schedule to meet production demands. Key Responsibilities · Operate Lectra/Gerber cutting machines and other automated equipment to cut fabric and materials according to production specifications. · Collaborate with other cutters and spreaders to maintain workflow efficiency. · Record and monitor material usage; maintain accurate inventory documentation. · Perform routine maintenance and troubleshooting on cutting equipment. · Maintain a clean, organized, and safe work environment. · Collaborate with production and inventory teams to ensure timely material availability. · Inspect cut materials for quality and accuracy before releasing to production. · Adhere to all safety protocols and company procedures. Qualifications · High school diploma or equivalent required. · Experience operating Lectra/Gerber or similar cutting machines preferred. · Strong attention to detail and ability to interpret cutting patterns/work with online cutting software · Basic mechanical skills for equipment maintenance. · Good organizational and record-keeping abilities. · Ability to work independently and in a team environment. Able to work in inches and yards Able to spread fabric manually and automatically Schedule Requirements · Must be available to work a flexible schedule, including early mornings, evenings, or weekends as needed to support production timelines. Physical Requirements · Ability to stand for extended periods. · Ability to lift and move materials up to 50 lbs. · Manual dexterity and visual acuity are required for machine operation and material inspection. What We Offer • Competitive Pay – Submit your pay requirements with application., • Health & Wellness – We offer medical & dental and vision insurance and retirement benefits after 90 days of employment as well as paid vacation time and personal days for illness/personal emergencies., • Growth and Development - We are constantly seeking to offer opportunities and support for personal and professional development. Ricochet Manufacturing is an Equal Employment Opportunity Employer (EEO). We are committed to providing a workplace that is free from discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual qualifications, without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other status protected by applicable laws. We value diversity and inclusion, and we encourage individuals from all backgrounds to apply.

Job Description Title: Folding Operator Reports to: Ryan McCormick Overview: At McCormick's Bindery - A Division of Fox Group - we are more than just print finishing and packaging experts - we are innovators, problem solvers, and creators who bring ideas to life. From print finishing to custom packaging solutions, our team takes pride in delivering the highest quality work for brands across industries. Scope of Position: The Folding Operator is responsible for set-up, running, and clearing the folder in the most efficient manner possible while maintaining an established run rate and quality. Responsibilities: • Perform line clearance according to standing Standard Operating Procedure’s (SOP’s) and complete all Line Clearance (LC) Logs, • Have all necessary material staged at the machine, • Read and understand job jacket instructions, • Ensure customer sample is at the machine and first piece approval matches the sample, • Supervise helpers, • Obtain sign-off of first piece approval by supervisor, • Perform quality pulls as specified in department SOP, • Complete production logs both for Fox Group and customer if required, • Ensure machine is set up properly and running to specified rate and quality, • Identify non-conforming products and place Quality Assurance (QA) inspect tags on load, • Follow any customer specific requirements for manufacturing, quality, and shipping, • Report any unclear or conflicting information to the department supervisor, • Request labels from shipping and apply to cartons if required, • Perform any other duties as required Qualifications: Required • High school diploma or equivalent, • 3-5 years of experience with signature folding for binding and Pharmaceutical Insert (PI) folding, • Ability to work overtime when needed Preferred • Experience operating Vyguk, Hiedelberg and Stahl Folder

Job DescriptionOperations Administrator This position is a temporary role that will support purchasing and supply chain activities by helping ensure materials are ordered, tracked, and delivered on time. The role works closely with suppliers and internal teams to maintain accurate purchasing data, follow up on orders, and support day-to-day procurement operations. Responsibilities *Support daily procurement activities and purchasing operations. *Monitor open purchase orders and follow up with suppliers on delivery schedules. *Expedite material orders to help maintain production and inventory requirements. *Maintain accurate supplier and purchasing information within company systems. *Track material status and communicate potential delays or shortages to the appropriate teams. *Research and resolve order discrepancies, delivery concerns, and supplier-related issues. *Assist with purchasing records, reporting, and data entry activities. *Support continuous improvement efforts by identifying opportunities to improve procurement processes. *Ensure compliance with quality standards and applicable procurement requirements. Requirements: *Monday through Friday, 8:30 AM - 5:00 PM. *Hybrid schedule: In office Tuesday through Thursday; remote Monday and Friday. *High school diploma or GED required. *Minimum of 1 year of experience in purchasing, procurement, supply chain support, customer service, administration, or a related role. *Strong written and verbal communication skills. *Good organizational and time-management abilities. *Strong problem-solving and research skills. *Ability to work effectively within a team environment. *Ability to build productive working relationships with suppliers and internal stakeholders. *Strong administrative and data-entry skills. *Proficiency with Microsoft Excel and Microsoft Office applications. *Experience with ERP systems or Oracle is a plus. Call to Action If you're organized, detail-oriented, and interested in supporting purchasing and supply chain operations, apply today to join a collaborative manufacturing and operations team. Disclaimer By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. Reply STOP to cancel and HELP for help. Privacy policy: www.synerfac.com/privacy/ #ZRCH

Job DescriptionTitle: Administrative Assistant I Location: Pennsauken, NJ Duration: 6 months Details: • Coordinate site visit logistics for customers, suppliers, or VIPs, • Order and ship needed supplies., • Input raw material receipts into SAP, • Work with supervisors to ensure timecards are being populated accurately, • Answer the phone and door, • Enter information resulting from maintenance work into PM system, • Run the overtime reports, • Run the document management system, ensuring documents are reviewed on the required frequency, updating as needed, and general upkeep of the document system., • Serve as the double check on shipping loads to ensure accuracyExperience with document management system Required • 2+ years of administrative experience in a dynamic environment, • Demonstrated ability to utilize computer software (systems used are Microsoft Office, intra/internet, etc.), • Professional and customer service-oriented demeanor, • Experience with SAP preferred, • Demonstrated initiative and outstanding time management, • Attention to detail is very important #ExecAssistant1 #TB_PH #ZRHC Why TalentBurst? At TalentBurst, we deliver more than talent, we deliver outcomes. We partner with you to move quickly and connect you to opportunities aligned with your skills and long term growth. Backed by precision, transparency, and results, we connect top talent with leading organizations through trusted partnerships. We offer competitive compensation and comprehensive benefits, including medical, dental, vision, and retirement options. TalentBurst is an equal opportunity employer committed to an inclusive and diverse workforce. \nCompany Description Founded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website www.talentburst.com or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA Founded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website www.talentburst.com or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

Job DescriptionDescription: CCT (Coating & Converting Technologies, LLC) is committed to quality and innovation with a customer-first philosophy that bonds us. We offer high-performance, pressure-sensitive tapes and adhesive solutions for a range of market applications. What sets us apart is how we deliver: speed of response, flexibility in products, advanced technologies, significant customization, creativity, problem-solving, and competitive economics. CCT is recruiting an energetic, confident, and experienced individual to join our growing team. We are searching for someone who has a passion for excellence and a proven ability to inspire that passion in others. As a Machine Operator, you will be assigned to work on lines and may work in one or more workstations. You will be required to be proficient in multiple assets in a given location. You will be responsible for machine setups and changeovers, problem-solving, performing PMs, and making decisions on machine adjustments. Responsibilities • Load raw material into machine and unload finished product, • Determine and control the machine cycle varying and modifying it as necessary, • Perform tests and check products routinely for multiple characteristics using standard measuring devices and making some judgments against not readily measurable standards, • Meet production schedules and program production sequences for optimal productivity, • Follow standard operating procedures and specifications or instructions of higher-level technical personnel and monitor meters, gauges, valves, flow ratios, temperatures, pressures, and related controls and guidelines to ensure adherence to production/process specifications, • Operating a Forklift and machinery throughout the shift, • Maintain production records and logs of equipment and product performance, • Follow all health, safety, and housekeeping procedures, policies, and practices and consistently work in a safe manner with regard to self, co-workers, and manufacturing systems, • Support safety, quality, and continuous improvement initiatives, • Assist and support other team members in meeting department and site goals, • Participate and share in performing all tasks necessary to run the facility, • Demonstrate respect for the Company’s values daily, maintain and uphold all policies & procedures, • Perform other duties as assignedRequirements:, • High school diploma, GED, trade school, or combination of training and experience, • 3+ years of relevant manufacturing machine operator experience, • Ability to manage multiple projects simultaneously, • Able to work overtime, including short-notice requests, • Motivated, takes initiative, and possesses a strong work ethic, • Ability to multitask within a structured environment, • Extraordinary organization skills, strong time management skills, and exceptional communication skills, • Ability to follow electrical schematics and drawings, • Possess the highest standards of accuracy and attention to detail in a dynamic, multitasking environment, • Capacity to work with limited supervision, independently, and as a team member, • Must be legally authorized to work in the United States Additional Information • All your information will be kept confidential according to EEO guidelines, • Able to work normal and/or extended office hours to meet established deadlines, • Works in a production facility environment 100% of the time, • While performing the duties of this job, the employee is regularly required, for the duration of the workday to stand, carry, lift and move 75 or more pounds, work in a facility with high noise levels and extreme cold and hot temperatures, • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions About CCT & Henkel CCT is a leading manufacturer of specialty adhesive tape solutions serving a variety of industries throughout North America. The CCT is part of Henkel, a global company with around 50,000 employees worldwide and a strong portfolio of leading technologies and brands. Henkel Adhesive Technologies is a global market leader in adhesives, sealants and functional coatings. Together, CCT and Henkel Adhesive Technologies combine deep expertise in specialty tapes and liquid adhesives to deliver innovative, sustainable solutions and greater value for customers and consumers. At Henkel, we come from a broad range of backgrounds, perspectives, and life experiences. We believe the uniqueness of all our employees is the power in us. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. The “Know Your Rights” Poster is available here: "Know Your Rights" Poster .

Job Description This position is responsible to provide operational support in reconstruction efforts for clients. Qualified Candidate must have extensive carpentry experience and capability of working with little supervision. Candidate must be able to assist with scope development with BELFOR Estimators and run project autonomously. An Intermediate Carpenter will participate in the development of basic level carpenters. Intermediate Development objectives include; 1) expanding capability from residential to commercial and multi-family projects; (2) competence leaded and self-performing emergency services (3) increased material knowledge and proficiency with various carpentry subsets of framing, cabinetry, trim, etc. This position is the level 3 in the Progressive Carpenter track. Responsibilities • Recognize potential problems with the project and timely request additional guidance and assistance, • Answer most questions regarding the project and direct more specific or complicated questions to the appropriate resource, • Move and protect contents without damage, • Construct appropriate containment for construction dust, dirt and airborne contaminant in working area, • Using appropriate tools and accepted BELFOR methods, perform tasks related to floodcutting, salvaging and labeling baseboards, cabinets, doors, etc., • Attend and successfully complete shrink wrap training and complete 4 projects containing shrink wrap, • Develop ability to identify the different types of insulation, their thickness and their respective R-value, • Apply learned skills and materials knowledge relative to Trim, Doors, Cabinetry, Insulation, Rough Framing, acoustical Ceilings, Roofing materials, and Exterior Siding to daily tasks, • Perform Daily vehicle safety and maintenance inspections and maintain in clean serviceable condition, • Must maintain attention to detail, • Will be required to meet BELFOR Standards in safeguarding other people's property, • Must have a comprehensive understanding of customer service, principles and practices, • Work under time constraints to meet specific timelines, • Will be required to work nights and weekends as requested and travel periodically, • Report time worked and equipment and consumables used timely and accurately, • Attend BELFOR sponsored operations and safety training courses as required Requirements • Supervision of unskilled labor, Basic Level BELFOR employees, and the occasional sub-contractor in any residential setting, • Answer simple questions about the project and when to defer questions to more qualified personnel, • Maintaining equipment used in daily tasks, • Perform emergency services as needed - - IE Board Ups, securing building against further damage, • Additional other duties as required Disclaimer The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties and skills required of personnel so classified. Company DescriptionBELFOR Property Restoration is the North American leader in integrated disaster recovery and property restoration services. With more than 100 full-service offices in the U.S., we are geographically positioned to respond to almost any disaster – large or small - coast to coast. A proven track record of superior response and unmatched resources has made BELFOR the contractor of choice for damages caused by fire, water, wind or other catastrophes.BELFOR Property Restoration is the North American leader in integrated disaster recovery and property restoration services. With more than 100 full-service offices in the U.S., we are geographically positioned to respond to almost any disaster – large or small - coast to coast. A proven track record of superior response and unmatched resources has made BELFOR the contractor of choice for damages caused by fire, water, wind or other catastrophes.

Job Description Job Title: Commercial Roofing Kettle Operator Location: Pittsburgh, PA Employment Type: Full-Time Hourly Field-Based Pay: $26.00 - $36.00 per hour, depending on experience and certifications Position Summary We're looking for an experienced Kettle Operator to run hot asphalt operations on built-up and modified bitumen roofing projects throughout the Pittsburgh metro. This is a hands-on field role for someone who understands hot work, respects the equipment, and keeps the crew supplied and safe. Mechanical aptitude is a strong plus - the person who can troubleshoot a kettle pump or a generator on site keeps the whole job moving, and we pay for that skill set. At J.R. & Co., Inc., we're not just building roofs - we're building careers. Established in 1986 and proudly veteran-owned, we're an energetic, optimistic, and family-oriented construction company based in Kansas City, MO. While roofing is our specialty, our services span everything from sheet metal and solar panel installation to rooftop maintenance and disaster relief. With a reputation for excellence in workmanship and customer service, we’ve earned recognition from top industry manufacturers and an A+ rating from the BBB. If you're looking for a place to grow, thrive, and make a real impact while working in a safety-focused, supportive environment, J.R. & Co., Inc. is the place for you. Join our team today and help us build something great! What You'll Do • Operate, monitor, and maintain the asphalt kettle throughout the workday, including startup, temperature control, and safe shutdown, • Maintain asphalt at proper EVT (equiviscous temperature) and monitor against flash point at all times, • Load asphalt kegs/blocks, manage propane supply, and keep material flowing to the roof via pump, hoist, or lugger, • Perform daily equipment inspections and routine maintenance on kettles, pumps, hoses, generators, and small engines, • Maintain fire watch, keep extinguishers staged and inspected, and enforce the hot work safety zone, • Set up and break down the ground-level work area, including traffic control and barricades, • Assist the roofing crew with material handling, tear-off, and installation as needed, • Follow all OSHA, company, and site-specific safety requirements without exception What You Need • Proven experience operating a roofing kettle on commercial job sites, • OSHA 10 or OSHA 30 certification (current), • Working knowledge of hot asphalt safety, including flash point, EVT, and burn prevention, • Ability to repetitively lift and carry 100+ lbs throughout the shift, • Ability to work outdoors year-round through Western PA winters, heat, and varying conditions, and to stand, bend, climb, and carry for extended periods, • Reliable transportation and consistent, on-time attendance, • Valid driver's license What Sets You Apart • Mechanical or equipment maintenance background (small engine, hydraulic, diesel, or fleet repair) — top of our pay range is reserved for operators who can also service the equipment, • Experience with BUR and modified bitumen systems, • Experience on tight urban sites, • Powered Industrial Truck / forklift certification Compensation • $26.00 - $36.00 per hour, based on experience, certifications, and mechanical skill, • Overtime available What We Offer • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and paid holidays, • Company-provided training and certifications, • Career Advancement Location • Pittsburg, PA Ready to Apply? Apply today or call our recruiting team. J.R. & Co. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or any other protected characteristic.

Job Description Administrative assistant duties and responsibilities include providing administrative support to ensure efficient operation of the office. Supports managers and employees through a variety of tasks related to organization and communication. Administrative assistants are responsible for confidential and time sensitive material. Ability to effectively communicate via phone and email ensuring that all Administrative Assistant duties are completed accurately and delivered with high quality and in a timely manner. This role will report to the Manager, Office & Culture for Farson Enterprises Administrative assistant responsibilities: • Answer and direct phone calls, • Coordinate appointments and schedules and Partners calendars, • Maintain contact lists, • Produce and distribute correspondence memos, letters, faxes, and forms, • Co-ordinate schedules, appointments and bookings, • Develop and maintain a filing system, • Order office supplies, • Book travel arrangements, • Attending business travel meetings, • Provide general support to visitors, • Handle multiple projects, • Ensure operation of equipment by completing preventive maintenance requirements; calling for repairs; maintaining equipment inventories; evaluating new equipment and techniques, • Maintain supplies inventory by checking stock to determine inventory level; anticipating needed supplies; placing and expediting orders for supplies; verifying receipt of supplies, • Contribute to team effort by assisting all team members when needed, • Carry out administrative duties such as filing, typing, copying, binding, scanning, etc., • Ensure security, integrity and confidentiality of data, • Book conference calls, rooms, couriers, etc., • Cover the reception desk when required, • Maintain computer and manual filing systems, • Handle sensitive information in a confidential manner, • Coordinate office procedures, • Reply to email, telephone, or face to face inquiries, • Arranges travel processes, including flight and hotel booking, and car rentals for Partners, • Receive, sort, and distribute the mail, • Manage staff appointments, • Greet and assist visitors to the office, • Photocopy and print out documents on behalf of other colleagues, • Provide polite and professional communication, • Maintain office flow, • Organize, maintain, and distribute documents Administrative assistant requirements: • Proven administrative or assistant experience, • Knowledge of office management systems and procedures, • Excellent time management skills and ability to multi-task and prioritize work, • Attention to detail and problem-solving skills, • Excellent written and verbal communication skills, • Strong organizational and planning skills, • Proficient in MS Office, • Proficient in Powerpoint, • At least 5 years of experience in the field or in a related area, • College Degree, • Notary or ability and willingness to become one \nCompany Description Commercial Cleaning Company Commercial Cleaning Company

Job Description **SUPERVISORY RESPONSIBILITIES • No supervisory responsibilities. **Essential Duties and Responsibilities At the beginning of each shift, the employee receives instructions from the mfg. manager/supervisor, collects the required batch record information and follows the instructions in the batch record to manufacture a product. Ensures cleanliness and proper assembly of manufacturing equipment per approved procedures (SOP’s). Must be in compliance at all times by following batch records, SOPs and all company policies Perform all in-process testing and inspections as required by the Master Batch Record Completes and signs the batch record where appropriate. Reports to the supervisor any issues that may arise during the manufacturing process. Upon completion of the batch, supervisor is notified and a new batch is assigned. Ensures proper execution of Master Batch Records’ Standard Operating Procedures. Ensures accurate completion of equipment logs, line clearance and/or lab notebooks. Ensures cleanliness and proper assembly of manufacturing equipment per approved procedures (SOP’s). Weighs out material and components for production batches. Identify and report quality issues. Must be in compliance at all times by following batch records, SOPs and all company policies. Report accidents and unsafe conditions or unusual circumstances to mfg. manager/ supervisor. Understands and adheres to all cGMP and FDA regulations. Responsible for maintaining a neat and orderly work area at all times. Cleaning and sanitization of manufacturing rooms including walls, floors, and ceilings per current SOPs Responsible for the set-up, operation and cleaning of manufacturing equipment and manufacturing suites. Ability to work both independently and with others. **additional Job Responsibilities • Other duties may be assigned occasionally, as needed, by management | | | | **QUALIFICATIONS Ability to read, comprehend and apply comprehensive knowledge of pharmaceutical cGMPs, SOP’s, Batch Records and training documents to ensure ongoing quality compliance. Ability to perform all requirements independently with limited managerial oversight. Superior attention to detail to ensure accuracy of work product. In accordance with FDA regulations, Production Operator must be free from illness that could jeopardize the safety or quality of products Such illness may include but are not limited to any contagious illness, condition that cause bleeding, open lesions, flaking or peeling skin Must be able to wear all types of required protective equipment. **Education and/or Experience Has a high school diploma or the equivalent. A minimum of one year QA experience and knowledge of FDA and cGMPs regulations is preferred. **LANGUAGE SKILLS Must be able to read, understand and clearly communicate in the English language. Ability to effectively present information and respond to questions from other departments. Excellent verbal and written communication skills are required to execute documents and interact successfully with other departments **MATHEMATICAL SKILLS Ability to accurately perform mathematical calculations, including: Addition, subtraction, multiplication and division. Averages, percentages and fractions. | | | | **REASONING ABILITY Ability to identify problems early on and quickly determine the most effective solutions. Skilled at knowing the right questions to ask in order to fully understand a problem or situation. Thinks in a logical manner with an emphasis on delivering the highest levels of internal and external services. A minimum of one (1) year QA experience and knowledge of FDA and cGMPs regulations is preferred. Ability to work on first and/or second shift, as well as overtime when required, and able to perform the physical tasks associated with sampling and inspecting. Must be a highly organized, reliable, detail-oriented, self-starter, able to multi-task and prioritize effectively. Excellent verbal and written communication skills are required to execute documents and interact successfully with other departments. **INTERPERSONAL SKILLS/EMOTIONAL COMPETENCIES Takes full responsibility for the quality of their work product. Employee must demonstrate the ability to work in a team environment ¨NBSP; Consistently meets deadlines. Excellent listening & comprehension skills. Effectively collaborates and supports the objectives of other teams. Gives clear direction and instructions. Remains calm under pressure. Able to multi-task without losing focus. Ability to positively adapt to change. Maintains a professional appearance and projects a positive attitude. Able to interact with other departments necessary for the successful manufacturing/packaging of products. **PHYSICAL DEMANDS The physical demands described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand for 8 hours and use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms. The employee is required to stand, walk, bend and talk or hear. The employee must occasionally lift, push or pull up to 50 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. **WORK ENVIRONMENT The work environment characteristics described in this job description are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to loud | | | |

Job Description JOB DESCRIPTION Directly responsible to the General Manager and/or a delegate. Functionally responsible for operating the saw and stretcher in an efficient and cost-effective manner while maintain safety and quality standards. Regular communication is required with the press crew with regards to any safety or quality issues noticed. DUTIES AND RESPONSIBILITIES The duties and responsibilities of the Saw & Stretcher Operator are detailed below, but not limited to the following: Saw Operation • Read all specifications and/or notes outlined in the work order and in EPICS., • Follow verbal instructions from the press supervisor and other teammates., • Lay out, set up and operate metalworking machines such as saws, and other hand tools to cut or otherwise shape and form metal stock into parts or products., • Check products for correct shapes, dimensions, and other specifications using calipers and other measuring tools available (including and not limited to ASCONA scans)., • Troubleshoot and perform corrective action or minor repairs to the saw and stretcher., • Perform the required PM checks on the saw daily, for example daily checks on saw lubrication levels, cutting blade sharpness, etc., • Follow work order specifications and packing instructions., • Read and follow all notes in EPICS and apply them to the line on a daily basis., • Required to input information into EPICS such as weight, notes for die variances, etc. on an ongoing basis., • Verify NCRs that apply to the saw., • Update rework/redtag line in EPICS if the material is confirmed good at the saw if required. Must communicate this information with the press leads,, • Required to input information regarding low yields on EPICS with an explanation of why and suggestions of corrective actions., • Inspect cut lengths, critical dimensions and visually inspect material using measurement tools (including but not limited to ASCONA scans), • Ensure proper handling of material to maintain quality and good product., • Ensure skids are packed and bundled securely and all material coming off the saw is cleaned, free of defects and is good quality product adhering to our quality standards, • Ensure proper weight is measured and recorded to the minimum tolerance of 40 lbs., • Ensure efficient skid changeovers by being proactive and looking at subsequent work orders., • Effectively communicate any issues with Press Leads, such as poor yield, die variance, weight discrepancies, and scanning issues., • Escalate issues with the maintenance team immediately for any mechanical related downtime such as saw blade malfunction, saw clamp malfunction, etc., • Responsible for maintaining a clean and tidy line with focus on 5S to ensure good housekeeping is followed throughout the shift., • Ensure materials (skids, separators, sandwiches, etc.) are available at the saw station for duration of the shift., • Be proactive in communicating with forklift drivers when materials are required., • Ensure all quality checks are completed and recorded at the required frequency at the saw., • Ensure Ascona scans are completed as per billet entries, and ensure product meet specification. Escalate issues immediately with quality technicians & the press leads., • Ensure quality checks are conducted for visual & dimensional requirements., • Ensure any material that is out of spec is communicated to the press lead to make a prompt decision on whether it is to be scrapped or rectified., • Discuss any issues (mechanical, work-order related, etc.) with following shift, and ensure enough materials are available for a successful start-up. Stretcher Operation • Run the stretcher (live and dead ends) efficiently as possible and as required to ensure material is cleaned off the table continuously., • Ensure all extrusion pieces that are stretched are straight and twist free, and meet quality requirements (visual A or B)., • Regularly check dimensions and flatness and ensure extrusion is not over stretched., • Responsible for batching at storage table with right number of pieces per batch to avoid overcrowding., • Read and follow all notes in EPICS and update notes as required., • Immediately report any issues before, during or after stretching with press leads., • Communicate with saw crew any concerns regarding issues with dimensions and finish, such as marking bad cavities and batch marking., • Report any malfunction in stretching equipment to the press leads and the maintenance team., • Follow stretching instructions as per work order as required., • Comply with all quality related policies, procedures and system requirements. Requirements MINIMUM QUALIFICATIONS Education/Experience • High school Diploma with some technical background and mechanical aptitude., • Extrusion experience is an asset. Technical Skills/Competence • 1-2 years’ experience in an industrial environment, • Knowledge of machinery and ability to read drawings an asset. Willing to train., • Basic computer skills including MS Windows is required. Other MS software is an asset., • Understanding of measurements, tolerances, basic geometry, and numeracy comprehension., • Ability to lift up to 50lbs independently, and ability to lift up to 100lbs in collaboration with a team member., • Familiarity with extrusion software such as EPICS is an asset. Benefits We offer a comprehensive and competitive benefits package that goes beyond base pay, supporting your health, growth, and long-term success: • Profit Sharing, • Education Assistance Program, • Social Events, • Safety Shoe and Glasses Allowance, • Internal Growth and Development, • Health and Dental, • Life and AD&D, • Vision, • Critical Illness Insurance, • Long Term Disability The expected hourly rate for this position is $21.15. Actual compensation will be determined based on factors including, but not limited to, skills, experience, qualifications, internal equity, and business needs. Our organization may use Artificial Intelligence (AI) enabled tools to support our recruitment initiatives.

Job DescriptionDescription: Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times. Job Summary: This position reports to the Department Supervisor. The ideal candidate should possess knowledge of machines and tools including their design, uses, repair, and maintenance. Responsibilities: • Identify and implement efficiency improvements, cost reductions and profit improvement initiatives., • Accident prevention – correct and/or report any unsafe working conditions before they result in an accident., • Reads blueprints., • Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers., • Drill and punch holes in metal, for screws, bolts, and rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Fabricate or alter parts at construction sites, using shears, hammers, punches, and drills., • Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Operate safety equipment and use safe work habits., • Weld components in flat, vertical, or overhead positions., • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits., • Clamp, hold, stich-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding., • Will also use basic hand tools and grinder at times., • Detect faulty operation of equipment or defective materials and notify supervisors., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding., • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material., • Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications., • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment., • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers., • Lifting production objects of up to 50lbs., • Performs other duties as assigned., • Must be able to fulfill essential job function in a consistent state of alertness and safe manner. Why work for Sea Box? We offer benefits to our full-time employees that include: • Health Insurance, • Dental Insurance, • Vision Insurance, • Basic and Voluntary Life, • Long-Term Disability, • Flexible Spending Accounts, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, Bereavement, Jury Duty, • 401(k) with company match, • Employee Referral Program Employees are eligible for most benefits on the 1st of the month following date of hire. Location: This position is onsite (non-remote) at the Company’s corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company’s normal hours of operation. Requirements: Education: High school diploma or equivalent. Experience: The candidate should possess 2-5 years of welding experience, able to read blueprints. Must pass AWS 4G welding test. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. WE ARE AN EQUAL OPPORTUNITY EMPLOYER COMMITTED TO HIRING A DIVERSE WORKFORCEEOE/Minorities/Females/Veterans/Disability

Job Description Thompson First Group is currently seeking a qualified MIG Welder for a local client in Cinnaminson, NJ. Candidates who have a background completing MIG welds in an industrial setting are encouraged to apply. Job Description: Qualifications • The ideal candidate should possess knowledge of machines and tools including their design, uses, repair, and maintenance, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner, • Education: High school diploma or equivalent, • Experience: The candidate should possess 0 – 2 years of welding experience, able to read blueprints, • Must pass AWS 4G welding test, • Must be able to read tape measure and basic print readingResponsibilities, • Stitch weld, full weld components and assemblies with GMAW process, • Will also use basic hand tools and grinder at times, • This position reports to the Plant Manager or a Department Supervisor, • Accident prevention – actively identify, correct and/or report safety hazards to prevent accidents, • Actively identify and pursue cost reduction and efficiency/profit improvement opportunities, • Support the ISO 9001 Quality Management System and the Quality Policy calling for self-inspection of your work product, • Reads blueprints, • Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers, • Drill and punch holes in metal, for screws, bolts, and rivets, • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items, • Fabricate or alter parts at construction sites, using shears, hammers, punches, and drills, • Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools, • Operate safety equipment and use safe work habits, • Weld components in flat, vertical, or overhead positions, • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits, • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding, • Will also use basic hand tools and grinder at times, • Detect faulty operation of equipment or defective materials and notify supervisors, • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding, • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material, • Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications, • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment, • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers, • Performs other duties as assigned, • Lifting production objects of up to 50lbs, • Performs other duties as assigned Thompson First Group is an equal opportunity employer. All applicants will be considered for employment regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law.

Hiring Immediately for Roofing Subcontractors - Are you leading a skilled roofing crew looking for consistent, year-round work? Erie Home, a top industry leader, is seeking reliable roofing subcontractors. We’ve been ranked among the Top 10 on the Qualified Remodeler Top 500 list for consecutive years. Why Work with Erie Home? • $2,000 Sign-On Bonus, • Earning Potential: Up to $100,000 per year, • Reliable Work: Full-time, year-round projects, • Job Support: Detailed job packets provided, • Weekly Pay: Direct deposits every week, • No Material Costs or Dump Fees: We cover it all Requirements: • General Liability Insurance, • Workman's Compensation Insurance, • EIN Letter, • Current Contractor’s License (if required by your state), • Reliable vehicle, roofing tools, and equipment required for job completion. Let's elevate your roofing business together. Apply now! Erie Home is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, political affiliation, sexual orientation, marital status, disability, age, military service, or any other protected class. If you need a reasonable accommodation due to a disability, please contact Human Resources with your request and contact information.

Job DescriptionIRECT SUPPORT PROFESSIONAL-ON-CALL Job Description: • DIRECT SUPPORT PROFESSIONAL, • ON CALL - INCLUDING WEEKEND SHIFTS (MUST WORK 3-4 SHIFTS PER MONTH), • Life Skills and Educational Counseling, • Chores/House Maintenance, • Assist maintaining the physical plant by monitoring and inspecting their household chores., • Model and Assist with completing proper program household tasks., • Maintain the program logbooks daily., • Implement daily program schedule by ensuring task are completed as assigned by, • Administrative Staff., • Support client safety and apply counseling provisions when needed., • Food and Household Goods, • Model and assist with meal planning, and food inventory., • Support with the creation of a grocery-shopping list and shopping as assigned by the administrative staff., • Support and assist with monitoring of meal preparation., • Support the implementation of the Nutrition Program., • Monitor and supervise with mealtime organization., • Monitor the food and household needs, goods, and program meal budget., • Support and monitor client food and financial contributions to the program., • Manage and support clients with proper food handling, and skills., • Monitor and manage proper storage and safety of all household goods, • Medication and Health Management, • Support and Collaborate with the Nurses to assist clients with securing prescriptions when needed., • Support with life skills challenges, and concerns i.e., ensure appointments are met and process challenges, • Maintain proper safety techniques while managing hazardous material, • Collect and document urine samples as assigner, • Retrieve and review medication upon delivery and drop offs when needed, • Monitor, review, and collaborate with nursing staff upon client self-delivery of mediation to the program. Educational: • Staff collaboration on client-individualized treatment needs and schedules changes., • Assist in conflict resolution., • Provide crisis intervention., • Participate in Program milieu, • Conduct and Facilitate, attend and/or assist with educational groups and meetings (e.g., AA, and NA Meeting, Community Meeting) as assigned by Director., • Actively support in socialization and recreational activities during programming. Program: • Submit Sleep Wake Diary into AVATAR System, • Create and organize client chart using table of content, • Scan documents into AVATAR System, • Document educational groups and any other significant contact., • Conduct, facilitate and document fire drills., • Participate in Team Support Mtgs., Staff Mtgs. and supervision as assigned by Director and Assistant Director, • Read daily logs and document in logs at the time of shift and end of each shift., • Support in the safety of all, • Complete intake packets and inventory upon every admission into the program and discharge.( As needed), • scort clients to appointments and shopping as designed within the program schedule and or according to client treatment plan., • Conduct daily documentation and filing of Sign In logs, Refrigerator logs, Shift logs, and monitoring of clients movement., • Provide emergency coverage, • Ensure the program Accountability Schedule is follower, • All other assigned task by Director to insure continuity of car, • Attend scheduled/mandatory training as outlines in CBH, DDAP, and employee's individual training plans All shifts are awake shifts About Company:Apis Services, Inc. (a wholly owned subsidiary of Inperium, Inc.) provides a progressive platform for delivering Shared Services to Inperium and its Constellation of affiliate companies. Allowing these entities to advance their mission and vision. By exploring geographical program expansion and focusing on quality outcome measures to create cost savings that result in reinvestment into the organizations stakeholders through capacity creation and employee compensation betterment. Apis Services, Inc. and affiliate’s provide equal employment opportunities for all employees and applicants for employment in compliance with all federal and all applicable state and local laws and regulations, including nondiscrimination in hiring and employment. All employment decisions are made without regard to race, color, religion, gender, national origin, ancestry, age, sexual orientation, gender identity and expression, disability, genetic information, marital status, pregnancy/childbirth, veteran status or any other basis protected by law. This policy of non-discrimination and equal employment opportunities extends to every phase and aspect of hiring and employment.

Production Supervisor Responsibilities: Analyze daily production metrics, productivity, quality results, downtime, and workflow performance to drive continuous improvement, improve first-time quality, and ensure production goals are achieved Lead, coach, and develop production employees through performance evaluations, accountability, career growth opportunities, attendance management, and maintaining a safe, productive work environment Coordinate with Maintenance, Quality, Scheduling, Die Shop, and other departments to resolve production issues, manage downtime, support root cause investigations, and implement corrective actions Oversee daily operations including manpower planning, schedule adherence, material flow, housekeeping standards, production reporting, quality compliance, and effective shift handoffs to ensure operational success Required Skills & Experience: 3+ years of experience in similar production supervisor or lead role Experience working in an industrial, manufacturing, production or similar environment Must be able to work Monday to Friday from 7am to 3:30pm Continuous improvement experience Disclaimer: By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at

Soldering Technician Electronic Technician Responsibilities: Perform soldering of surface mount (SMT) and through-hole components on printed circuit boards. Follow IPC-A-610 and J-STD-001 standards to ensure high-quality workmanship and compliance. Read and interpret assembly drawings, bills of material (BOMs), and work instructions to complete builds accurately. Use microscopes and precision tools to perform detailed soldering and inspection work. Inspect completed assemblies for workmanship defects, solder quality, and component placement. Perform rework and touch-up soldering as needed to meet quality standards. Maintain proper handling of electronic components, including ESD (electrostatic discharge) precautions. Ensure all work meets customer specifications and internal quality requirements. Maintain a clean and organized workstation and follow all safety procedures. Collaborate with quality and production teams to resolve assembly or workmanship issues. Requirements: Availability to work Monday through Thursday, 6:00 AM - 4:30 PM. Experience in IPC-A-610, Class 3 and J-STD-001 criteria Certification to IPC / J-STD preferred Solder Surface Mount and Through Hole Components on Printed Circuit Boards Experienced in working with a microscope Expected to read process documentation including; Bills of Material and Assembly drawings Call to action: If you have strong soldering experience and take pride in quality workmanship on electronic assemblies, apply today to join a manufacturing team focused on precision and reliability. Disclaimer: By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. Reply STOP to cancel and HELP for help. Privacy policy:

Job DescriptionCurrently seeking a Consultant Pharmacist for a hybrid position in Long Term Care. The position is full time / part time in Camden and Gloucester counties. Must have NJ Board of Pharmacy license. Join Pharma-Care and our team of Consultant Pharmacists to provide top quality patient-focused services throughout New Jersey. Our complete spectrum of services will allow you to apply your skills in multiple settings while building your career, all within New Jersey's premier long term healthcare system. Our Consultant Pharmacists are professionals who are trained to share responsibility for the patient's medication regimen; they have access to the latest and best information on drug interactions, thorough knowledge of clinical outcomes, quality assurance, state and federal regulations, and health care education. This position pays $50.00 - $52.00 per hour. Qualified Minorities and/or Women are Encouraged to Apply. EOE/AA. Benefits Medical insurance, Dental insurance, Vision insurance, Prescription drug coverage, 401K with company match, Paid Life Insurance, Flex Spending Account (FSA), Flexible work schedule, Holiday pay, Paid time off, Paid sick leave Responsibilities A day in the life of a Consultant Pharmacist consultant: • Travel to long term healthcare facilities in your region (typically within 45 min from your home), • Evaluate the appropriateness and effectiveness of medication regimens. Areas of focus will include antimicrobial therapy, pain management, use of psychoactive medications., • Collaborate with physicians and other health care providers in managing medication therapy to ensure patient needs are met., • Apply specialized knowledge of the scientific and clinical use of medications; including medication action, dosing, adverse effects, and drug interactions., • Active role in the development and implementation of protocols, antimicrobial stewardship initiatives and appropriate drug utilization.Staff education:, • Provide education to the nursing staff through in-services and education material., • Provide input into formulary interchange program., • Educate healthcare team on new formulary medications, updated policies and procedures, medication safety initiatives and drug shortages., • Interdisciplinary relationships: Strives to develop a good working relationship with the medical and nursing staff in addition to other multidisciplinary departments by actively seeking out opportunities to improve patient care and medication management., • The practitioner routinely attends QAPI meetings, antibiotic stewardship meetings and psychoactive therapy meetings.Ideal Candidate will be:, • Detail-oriented, • Self Starter, • Able to manage their own schedule, • Takes accountability for their work product, • Flexible in work scheduleExtra Credit:, • Prior clinical experience in long term care, • Active CCP, • PA Board of Pharmacy license Requirements Authorized to work in the US without sponsorship Willing to travel regionally to visit healthcare facilities US Driver's License This job involves visiting long term healthcare facilities in multiple locations in Camden and Gloucester counties, NJ, are you willing and able to work in these facilities on a daily basis? Current NJ Board of Pharmacy License Minimum Bachelors Degree in Pharmacy Requisition #cmpmyrq3uw62h0jlcf9tja5na

Job Description We are offering exciting career opportunities for Construction Inspectors (NICET Level II thru IV). H&H currently has multiple inspection projects for movable and fixed bridges in Northern, Central and Southern New Jersey. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Ability to read and interpret construction plans, specifications, and any special requirements, • Working knowledge of mathematics with the ability to apply mathematical formulas and engineering principles to field measure quantities and calculate quantities of completed work to recommend payment to the contractor for items of work, • Ability to prepare clear and concise Daily Inspection Reports to document the work performed, the manpower, material, and equipment used; field measure and calculate quantities of work completed and other pertinent information, • Operational knowledge of field inspection equipment, • Good oral and written communication skills Requirements • Minimum of five years of bridge/highway experience, • Working knowledge of bridge and highway construction methods, materials, standards, and specifications, • NICET, ACI, SAT and Traffic Control certifications (preferred), • 10-hour OSHA safety training certification, • NJDOT and NJTA experience (preferred), • Good writing and communication skills Benefits We offer a professional work environment, competitive salary, benefits package and 401(k). EOE M/F/DISABILITY/VETS

Job DescriptionLOCATION: Philadelphia, PA EDUCATION: Bachelor’s Degree and/or Master’s degree in Interior Design or Architecture REGISTRATION/CERTIFICATIONS: NCDIQ is preferred but not required EXPERIENCE: 10 or more years of experience JacobsWyper Architects (JWA), a full-service design firm serving a variety of market sectors, is seeking a qualified Interior Designer who aligns with our values to join our award-winning architectural, planning, and interior design firm. We seek professionals to work across our Philadelphia, PA, Raleigh, NC, and Austin, TX offices who will bring knowledge, experience, and expertise to the role of Interior Designer. This role will be an integral part of the design team for learning environments, workplace design, and other specialty types for a broad range of clients such as Science & Tech, Industrial, Educational, and Cultural Institutions. The Interior Designer will collaborate with the design team to deliver high-quality projects on schedule. They will coordinate with external consultants and the internal production team, support leadership, and make informed technical decisions throughout the design process. This role is for people who are collaborative, organized, and confident in managing design deliverables from concept through completion. PRIMARY RESPONSIBILITIES • Generate finish plans, specifications, and material selections needed for documentation., • Perform assignments that include programming, conceptual design, schematic design, design development, space planning, and construction documents., • Develop code-compliant designs and presentation materials including 3D renderings., • Participate in the selection and presentation of furniture, furniture systems, fabric, equipment, color palettes, and lighting., • Create design environments which serve the client's goals and respond to their desired spatial needs, image, and aesthetic requirements, in collaboration with the Project Manager., • Participate in design presentations to the client and the projects' in-house design review presentations., • Collaborate across disciplines and within the design team as required by project type., • Work with external consultants such as furniture dealers, fabricators, and product representatives., • Articulate design principles that help govern the detailing phase of the project., • Mentor less experienced designers., • Inform and make decisions regarding facilities planning and holding the standards for a premier client. REQUIRED QUALIFICATIONS • An understanding of typical interior building materials, with respect to comparative costs, key performance and installation concerns, contributions to sustainable design goals, and other crucial features, • Ability to write architectural specifications and to coordinate these with the drawings, • An ability to read consultants' documents and provide feedback for coordination, • Ability to survey/measure spaces and create accurate background drawings and/or the ability to direct less-experienced designers on how to do so, • Strong knowledge of construction documents and procedures, construction detailing, and material application, • Competency building and life safety codes, • Experience working in all phases of design such as SD, DD, CD, and CA, • 2D and 3D design skills, • Proficient in Revit, • Proficient in Adobe Creative Suite applications (Photoshop, Illustrator, InDesign), • Effective communication skills for design ideas, • Intermediate skills in Enscape ABOUT US We are in the business of transformation. Together with our clients and partners, we envision spaces where people are freed to work more productively, make discoveries, and live healthier and more joyful lives. We love what we do. And we work not just for the love of architecture and design, but to satisfy our calling to improve the quality of life in our communities, both today and in the sustainable future. Our process is collaborative by design. We value and develop long-term partnerships with clients across a broad range of industries and institutions. By leveraging the design intelligence of the group, and making connections across industries and disciplines, we see farther than any of us could alone. That’s how innovation happens. We have a culture that values responsiveness, hard work, creative problem solving and design excellence, and a respect for the environment we inhabit. We are able and responsible designers and partners, creating environments that we need and use, supporting the life of our community. JacobsWyper Architects provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR WCN4LRk1kx

Job Description Context: The Common Market is a nonprofit social enterprise working to build a more resilient and equitable food system. Through a network of regional chapters, we connect family farmers to the institutions that need their food most, including schools, hospitals, universities, and community organizations. As our national network continues to grow, our ability to deliver on this mission depends on strong, reliable, and values-aligned operations. From warehouse teams and drivers to customer support and sales, our operational performance is critical to ensuring consistent, high-quality service. To support the continued growth and performance of our Philadelphia market, The Common Market is seeking a General Manager to lead site operations, develop frontline teams, and ensure excellence across warehouse, trucking, and food safety systems. This role will play a critical part in ensuring we consistently deliver on our commitments to customers, farmers, and communities. Role Description: The General Manager is responsible for leading and owning the day-to-day and long-term performance of The Common Markets Philadelphia distribution facility, with oversight of warehouse operations, trucking, food safety, and frontline team leadership. This role sits at the intersection of operations, people, and performance. The General Manager ensures that systems are executed with consistency and discipline, while also building the structure, accountability, and team capability needed to support growth. Working in close partnership with the Executive Director, Sales, Customer Support, and National Operations, this role owns execution through others while ensuring alignment across teams. The General Manager is responsible for delivering operational results while continuously improving systems, processes, and team performance. This is a highly hands-on leadership role for someone who is energized by building strong teams, improving operations, and driving consistent execution in a fast-paced distribution environment. The General Manager holds primary accountability for site-level performance, including operational execution, team effectiveness, and cost management. This role is expected to operate with a high degree of autonomy in day-to-day decision-making, ensuring the facility and fleet run effectively without requiring constant executive oversight. Candidate Profile: This role is best suited for a hands-on operational leader who thrives in a lean, fast-paced environment. The General Manager will directly oversee and work across multiple areas of the businessincluding procurement, warehouse operations, trucking, food safety, and people leadershipwithout large layers of specialized support. Successful candidates will be comfortable shifting between strategic leadership and hands-on problem solving while maintaining strong operational standards and accountability. The ideal candidate is an experienced operations leader who combines strong execution with the ability to build structure, develop people, and drive performance across a complex, multi-function operation. They are comfortable leading frontline teams, managing competing priorities, and ensuring that daily operations run smoothly while also identifying and implementing improvements. They are equally comfortable on the warehouse floor, reviewing performance metrics, directing staff, coordinating with cross-functional partners, scheduling repairs, and making real-time decisions that impact service, cost, and safety. Snapshot of the Ideal Candidate: Operational Leader & Owner: Leads full-site operations with accountability for performance, safety, and execution. Frontline Team Builder: Develops supervisors and hourly staff, building a culture of accountability, safety, and strong performance. Food Safety Leader: Maintains strong command of SQF, HACCP, FSMA programs. Logistics & Fleet Operator: Oversees routing, delivery performance, maintenance, and fleet coordination. Business-Minded Operator: Understands cost, service levels, and operational tradeoffs. Problem Solver & Decision Maker: Navigates shifting priorities with strong follow-through. Professional Foundation: 712+ years relevant experience; 35+ years team leadership. Who This Role Is Not for: This role may not be the right fit for candidates who: Prefer Strategy Over Execution. Avoid Direct People Management. Lack Food or Operational Experience. Prefer Predictable Environments. Are Seeking Remote Roles. Position Description: Site Leadership & Operational Ownership Own overall performance of the Philadelphia facility. Own overall performance of the Philadelphia facility, including safety, service levels, productivity, and cost control, with accountability for meeting defined operational and financial targets. Ensure alignment between daily operations and organizational goals. Identify risks and implement solutions to improve performance and reliability. Maintain accountability for operational standards across all functions. Warehouse Operations Oversee all warehouse activities to ensure efficient and accurate product flow. Oversee receiving, picking, packing, staging, and shipping operations. Ensure inventory accuracy through disciplined processes and controls. Maintain efficient warehouse layout and material flow. Enforce SOP adherence and continuous process improvement. Transportation & Fleet Oversight Ensure reliable, safe, and efficient delivery operations. Oversee routing execution, delivery performance, and driver scheduling. Manage fleet operations (8-truck fleet), including preventative maintenance coordination and repairs. Ensure DOT compliance, driver safety, and route efficiency. Food Safety & Quality (SQF Program Owner) Maintain strong food safety systems and compliance. Serve as site lead for the SQF Food Safety program. Ensure compliance with SQF, HACCP, FSMA, and customer requirements. Lead audits, corrective actions, and continuous improvement efforts. Maintain audit readiness at all times. People Leadership & Team Development Build strong teams and consistent performance across staff. Lead, coach, and develop supervisors, warehouse associates, and drivers. Build effective staffing plans and schedules aligned with workload. Drive performance management, accountability, and recognition. Support hiring, onboarding, and ongoing staff development. Lead hiring decisions, staffing structure, and performance management for all site-based roles, ensuring alignment with operational needs. Financial & Performance Management Ensure operational performance aligns with cost and efficiency goals. Manage labor and operating costs in alignment with budget targets. Track KPIs: productivity, accuracy, safety, service level, and labor efficiency. Use data to drive decisions and continuous improvement. Develop and manage site-level labor and operating budgets in partnership with leadership, with accountability for cost performance and efficiency improvements. Cross-Functional Leadership Ensure alignment across teams to support operational success. Partner with Sales and Customer Support. Collaborate with National Operations on process improvements. Serve as the primary operational leader for the Philadelphia market. Serve as the primary decision-maker for site-level operational priorities, balancing customer needs, operational capacity, and organizational goals. Success in This Role Looks Like The site consistently meets or exceeds service, safety, and accuracy targets. Labor and operating costs are managed effectively against plan. The team operates with strong accountability and low turnover. Food safety audits are passed with minimal corrective actions. Operational issues are identified and resolved proactively without escalation. Requirements: Qualifications Bachelors degree or equivalent experience. 712+ years of experience in operations, logistics, or distribution environments. 35+ years managing frontline or supervisory teams. Experience in food handling environments required. Experience leading operations in a small to mid-sized, lean organization where you held direct responsibility across multiple operational functions is strongly preferred. Experience managing a trucking fleet and drivers. Refrigerated trucking preferred. SQF, HACCP, FSMA, or equivalent experience required. Strong organizational and communication skills. Location & Travel This role is based in Philadelphia and requires full-time onsite presence at the distribution facility. Compensation & Benefits Salary: $100,000 annually Health Care Plan (Medical, Dental & Vision) Retirement Plan (SIMPLE IRA with 100% employer match) Life Insurance (100% Employer Paid Life, AD&D, Short and Long-Term Disability) Paid Time Off (Vacation, Sick & Public Holidays)

Job Description Hi, We have a contract-to-Hire Leave Specialist position. We are open to candidates based in our Philadelphia, Washington DC, Chicago, Houston, or Dallas offices. The role will be hybrid, with two days per week in the office. We are looking for someone with: • 3–5+ years of leave experience, full-cycle, in-house leave administration experience. We are looking for someone who has managed the leave process internally rather than working in a fully outsourced leave model., • Experience managing a high volume of leave cases, approximately 40–50 active cases., • Experience working directly with employees across various employment statuses and circumstances., • Strong understanding of FMLA and multi-state leave laws., • Working knowledge of California, New York, and Washington, DC leave laws are highly preferred., • General Excel experience, including filtering, pulling survey information from shared files, and maintaining personal leave reports., • Strong employee/customer service and relationship-management skills. This person will serve as a concierge to our employees and will work directly with people during some of the most challenging and sensitive times., • The ability to communicate difficult information with empathy, professionalism, and confidence while ensuring employees understand their leave options and responsibilities., • This is a role that requires someone who is comfortable balancing the technical/compliance side of leave administration with a strong people-focused approach. Estimated Min Rate: $35.00 Estimated Max Rate: $50.00 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs, • Certification and training opportunities Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply. Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit https://www.yoh.com/applicants-with-disabilities to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: https://www.yoh.com/privacy-notice Stay Safe During Your Job Search Fraudulent recruiting communications have become increasingly common. Emails from Yoh recruiters will only come from an @yoh.com email address. Yoh will never ask candidates to pay fees, purchase equipment, send gift cards, or transfer funds as part of the recruiting or hiring process. If you receive a communication that appears suspicious or requests payment, contact Yoh directly before responding or sharing personal information. \nCompany Description Yoh delivers expertise, methodology, and momentum to keep work moving forward. From strategy to execution, we deliver bold ideas and big results through consulting, staffing, and enterprise solutions. Nearly a century after our founding, Yoh remains STEM-centered, collaborative, and committed to client success. Yoh is a proud member of the Day & Zimmermann family of companies. Visit us at https://www.yoh.com/ Yoh delivers expertise, methodology, and momentum to keep work moving forward. From strategy to execution, we deliver bold ideas and big results through consulting, staffing, and enterprise solutions. Nearly a century after our founding, Yoh remains STEM-centered, collaborative, and committed to client success. Yoh is a proud member of the Day & Zimmermann family of companies. Visit us at https://www.yoh.com/