Nuclear jobs in Pittsburgh, PACreate job alerts

We are seeking a highly skilled Nuclear Medicine Technologist to join our radiology team. In this role, you will prepare and administer radioactive drugs for imaging or therapeutic purposes while ensuring patient safety throughout the process. • Prepare radioactive drugs (radiopharmaceuticals) and administer them to patients via injection, inhalation, or oral methods., • Operate advanced imaging equipment to capture images of radioactive material within the body for diagnostic purposes., • Monitor patients during procedures for any adverse reactions or complications., • Ensure compliance with radiation safety protocols to protect patients, staff, and yourself from unnecessary exposure., • Collaborate with physicians to analyze imaging results for accurate diagnoses or treatment plans., • Maintain detailed records of procedures performed and ensure proper disposal of radioactive materials according to regulations., • Work in hospitals, diagnostic imaging centers, or research facilities equipped with nuclear medicine technology., • A dynamic environment requiring attention to detail, technical expertise, and adherence to safety standards.

We are seeking a highly skilled Nuclear Medicine Technologist to join our radiology team. In this role, you will prepare and administer radioactive drugs for imaging or therapeutic purposes while ensuring patient safety throughout the process. • Prepare radioactive drugs (radiopharmaceuticals) and administer them to patients via injection, inhalation, or oral methods., • Operate advanced imaging equipment to capture images of radioactive material within the body for diagnostic purposes., • Monitor patients during procedures for any adverse reactions or complications., • Ensure compliance with radiation safety protocols to protect patients, staff, and yourself from unnecessary exposure., • Collaborate with physicians to analyze imaging results for accurate diagnoses or treatment plans., • Maintain detailed records of procedures performed and ensure proper disposal of radioactive materials according to regulations., • Work in hospitals, diagnostic imaging centers, or research facilities equipped with nuclear medicine technology., • A dynamic environment requiring attention to detail, technical expertise, and adherence to safety standards.

Setting: Hospital Jackson HealthPros is seeking a skilled nuclear medicine technologist to work collaboratively with a multi-disciplinary team where you’ll be responsible for preparing and administering radioactive drugs and operate radiation detection and imaging equipment. Minimum Requirements • An associate or bachelor’s degree in nuclear medicine technology, • State license and certification to practice nuclear medicine, • BLS certification Benefits Designed for Travelers We deeply value your commitment to impacting others, that’s why we offer a comprehensive and competitive benefits package starting your first day. • Weekly, On-Time Pay because that's how it should be, • Full Medical Benefits & 401k Matching Plan, • 24/7 Recruiter: Your main point of contact available by text, phone or email, • Competitive Referral Bonuses, • 100% Paid Housing Available As a health or education professional with Jackson HealthPros, you get the flexibility, stability and growth you need with the satisfaction of impacting communities nationwide. Choose from a variety of career options including direct hire, temp-to-hire, and travel contracts in cities coast to coast. Get full-time pay, benefits, and relocation assistance (at no cost to you) in travel contracts that give you the freedom to explore, with the stability of a full-time job. Find your perfect match with ProVenture, our AI enhanced career app designed just for you. EEO Statement Jackson Healthcare and its family of companies are an EEO/AA Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender, gender identity and expression, national origin, age, disability or protected veteran status. We celebrate diversity and are committed to creating an inclusive environment for all of our associates.

Job Description JGMS Government Services is seeking a Welding Engineer/Project Manager Please continue to the JGMS Career page to apply for this position: Location: West Mifflin, PA Status: Exempt / Full-Time / Hybrid Salary Range: $125k - $145K depending on qualifications Scope: Do you want to work for the world's best Navy? Work with a team of engineers supporting repair technology development efforts by leading test programs both within a laboratory setting and via commercial subcontracts. This challenging and rewarding position offers opportunities to continue developing and expanding technical skills through complex assignments involving established as well as novel technologies, and interpersonal skills through numerous interfaces including stakeholders and support groups across the Naval Nuclear laboratory, our shipyards, and Naval Reactors Headquarters in Washington, DC. Applicant must be able to plan, follow, and execute work efforts, conceive and produce technical instructions and procedures, track procurement actions/budget performance, and write technical submittals and recommendations. Candidate will also contribute to the development of novel repair techniques, by drafting, placing, following and reporting subcontracted repair method development/demonstration contracts. The position will also require some travel to vendors and shipyards to support project planning, equipment testing and repair deployment. Primary responsibilities will include teaming with other engineers as you identify, research, test, and evaluate metallic and non-metallic repair technologies, leveraging existing welding, machining, and other industrial processes. There is also a Project Management focus on the responsibilities of the position including project planning, assignment of work, coordination of resources, and reporting of project performance within NNL's broader repair technology development community. Candidates must have experience in the following: • Creating/delivering technical presentations., • Leading and executing laboratory operations., • Developing, testing, evaluating, and eventually qualifying repair procedures in the laboratory., • Consulting with various fabrication vendors and shipyards., • Other duties as assigned. Required Qualifications: Bachelor’s degree in Welding Engineering, Materials Science & Engineering, Mechanical Engineering or related field and a minimum of 10 years of relevant experience. Preferred Qualifications: • Experience with Automated/mechanized gas tungsten arc welding, • Demonstrated acumen in executing laboratory work, • Familiarity with inspection methods Security Clearance: A current active DOE L Security Clearance is required. Background Check and Screenings A pre-employment drug screening and background review that includes checks of personal references, credit, law enforcement records, and employment/education verification is required. Benefits We take pride in promoting a healthy work-life balance, family-friendly benefits, servant leadership, team values and professional growth. Our competitive benefits package includes: • Medical Insurance - 100% company paid premiums for employees., • Dental and Vision Insurance., • 401k plan with company match., • Paid time off 24 hours of paid community service a year!, • Up to 4 weeks paid time off a year., • 10 paid floating holidays., • Life insurance, short- and long-term disability., • Employee Assistance Program (EAP)., • Professional development opportunities. JGMS Family of Companies Ethically minded, mission driven. We provide applied technology, engineering, science, and management services to government and private sector clients nationwide. As a diverse team of professionals, we are focused on meeting the needs of our clients and following through with real solutions that effectively and efficiently meet all budgetary and scheduling requirements. As a member of the team, you will be involved in a growing, dynamic organization that is developing new client solutions to benefit our environment and economy. Equal Opportunity Employer JGMS Government Services LLC (JGMS-GS) is dedicated to the principles of equal employment opportunity (EEO) in any term, condition, or privilege of employment. The Company prohibits unlawful discrimination against applicants or employees on the basis of age (40 and over), race, color, religion, national origin, disability, genetic information, sexual identity, sexual orientation, pregnancy, veteran status, marital status, or any other status protected by federal, state or local laws. This policy applies to all applicants, employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, or any other entity in professional contact with the Company. Due to the nature of the government contract requirements and/or clearance requirements, US citizenship may be required. If you are an individual with a disability and need assistance completing the online application, please call (970) 254-1354. Alternatively, an email may be sent to with the subject line 'Applicant Accommodation' in the email. Company DescriptionJGMS Family of Companies Ethically minded, mission driven. We provide applied technology, engineering, science, and management services to government and private sector clients nationwide. As a diverse team of professionals, we are focused on meeting the needs of our clients and following through with real solutions that effectively and efficiently meet all budgetary and scheduling requirements. As a member of the team, you will be involved in a growing, dynamic organization that is developing new client solutions to benefit our environment and economy. Equal Opportunity Employer JGMS Government Services LLC (JGMS-GS) is dedicated to the principles of equal employment opportunity (EEO) in any term, condition, or privilege of employment. The Company prohibits unlawful discrimination against applicants or employees on the basis of age (40 and over), race, color, religion, national origin, disability, genetic information, sexual identity, sexual orientation, pregnancy, veteran status, marital status, or any other status protected by federal, state or local laws. This policy applies to all applicants, employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, or any other entity in professional contact with the Company. Due to the nature of the government contract requirements and/or clearance requirements, US citizenship may be required. If you are an individual with a disability and need assistance completing the online application, please call (970) 254-1354. Alternatively, an email may be sent to with the subject line 'Applicant Accommodation' in the email.JGMS Family of Companies\r\n\r\nEthically minded, mission driven.\r\n\r\nWe provide applied technology, engineering, science, and management services to government and private sector clients nationwide. As a diverse team of professionals, we are focused on meeting the needs of our clients and following through with real solutions that effectively and efficiently meet all budgetary and scheduling requirements. As a member of the team, you will be involved in a growing, dynamic organization that is developing new client solutions to benefit our environment and economy.\r\n\r\nEqual Opportunity Employer\r\n\r\nJGMS Government Services LLC (JGMS-GS) is dedicated to the principles of equal employment opportunity (EEO) in any term, condition, or privilege of employment. The Company prohibits unlawful discrimination against applicants or employees on the basis of age (40 and over), race, color, religion, national origin, disability, genetic information, sexual identity, sexual orientation, pregnancy, veteran status, marital status, or any other status protected by federal, state or local laws. This policy applies to all applicants, employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, or any other entity in professional contact with the Company.\r\n\r\nDue to the nature of the government contract requirements and/or clearance requirements, US citizenship may be required.\r\n\r\nIf you are an individual with a disability and need assistance completing the online application, please call (970) 254-1354. Alternatively, an email may be sent to with the subject line 'Applicant Accommodation' in the email.

Job DescriptionPosition: Welder (FCAW & GTAW) Location: East Pittsburgh, PA; Holtec Manufacturing Division Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec’s rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2–4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec’s safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec’s WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Powered by JazzHR lURiZtQf7b

Job Description Navarro Research and Engineering is recruiting a Specialized Engineer III- Welding in West Mifflin, PA. An active DOE L clearance or DOD equivalent is required to be considered for this position. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense. Do you want to work for the world's best Navy? Work with a team of engineers supporting repair technology development efforts by leading test programs both within a laboratory setting and via commercial subcontracts. This challenging and rewarding position offers opportunities to continue developing and expanding technical skills through complex assignments involving established as well as novel technologies, and interpersonal skills through numerous interfaces including stakeholders and support groups across the Naval Nuclear Laboratory, our shipyards, and Naval Reactors Headquarters in Washington, DC. Applicant must be able to plan, follow, and execute work efforts, conceive and produce technical instructions and procedures, track procurement actions/ budget performance, and write technical submittals and recommendations. Candidate will also contribute to the development of novel repair techniques, by drafting, placing, following and reporting subcontracted repair method development/demonstration contracts. The position will also require some travel to vendors and shipyards to support project planning, equipment testing and repair deployment. Primary responsibilities will include teaming with other engineers as you identify, research, test, and evaluate metallic and non-metallic repair technologies, leveraging existing welding, machining, and other industrial processes. There is also a Project Management focus on the responsibilities of the position. This includes project planning, assignment of work, coordination of resources, and reporting of project performance within NNL's broader repair technology development community. Requirements BS Degree in Welding Engineering, Materials Science & Engineering, Mechanical Engineering or related field from an accredited college or university and a minimum of 10 years of relevant experience; or MS Degree in Welding Engineering, Materials Science & Engineering, Mechanical Engineering or related field from an accredited college or university and a minimum of 7 years of relevant experience. Candidates must have experience making technical presentations and have the ability lead/execute laboratory operations in a productive, timely, and compliant manner. Should be able to help develop, test, evaluate, and eventually qualify repair procedures in the laboratory and consult with various fabrication vendors and shipyards. Repair operations which may be supported include gas tungsten arc welding, gas metal arc welding, shielded metal arc welding, epoxies/composites, and mechanical/machining processes. The candidate will need to have or learn the ability to develop and interpret specifications, drawings, and engineering standards. Applicant must be able to plan and execute work programs, design experiments, analyze experimental results, and prepare technical reports. Desired Knowledge, Skillset, and Abilities Candidates that have automated/mechanized gas tungsten arc welding experience and that have demonstrated acumen in executing laboratory work are preferred. Familiarity with inspection methods is a plus. Excellent individual initiative and creativity will enhance the successful candidate's value in this position. Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status or any classification protected by applicable state or local law. EEO Employer/Vet/Disabled Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Public Holidays), • Short Term & Long Term Disability

Job Description Navarro Research and Engineering is recruiting for a Specialized Welding Engineer III in West Mifflin, PA. An active DOE L Clearance (or DOD equivalent) is required to be considered. 25% telework is allowable. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense. Do you want to work for the world's best Navy? Work with a team of engineers supporting repair technology development efforts by leading test programs both within a laboratory setting and via commercial subcontracts. This challenging and rewarding position offers opportunities to continue developing and expanding technical skills through complex assignments involving established as well as novel technologies, and interpersonal skills through numerous interfaces including stakeholders and support groups across the Naval Nuclear Laboratory, our shipyards, and Naval Reactors Headquarters in Washington, DC. Applicant must be able to plan, follow, and execute work efforts, conceive and produce technical instructions and procedures, track procurement actions / budget performance, and write technical submittals and recommendations. Candidate will also contribute to the development of novel repair techniques, by drafting, placing, following and reporting subcontracted repair method development/demonstration contracts. The position will also require some travel to vendors and shipyards to support project planning, equipment testing and repair deployment. Primary responsibilities will include teaming with other engineers as you identify, research, test, and evaluate metallic and non-metallic repair technologies, leveraging existing welding, machining, and other industrial processes. There is also a Project Management focus on the responsibilities of the position. This includes project planning, assignment of work, coordination of resources, and reporting of project performance within NNL's broader repair technology development community. Requirements BS Degree in Welding Engineering, Materials Science & Engineering, Mechanical Engineering or related field from an accredited college or university and a minimum of 10 years of relevant experience; or MS Degree in Welding Engineering, Materials Science & Engineering, Mechanical Engineering or related field from an accredited college or university and a minimum of 7 years of relevant experience. Candidates must have experience making technical presentations and have the ability lead/execute laboratory operations in a productive, timely, and compliant manner. Should be able to help develop, test, evaluate, and eventually qualify repair procedures in the laboratory and consult with various fabrication vendors and shipyards. Repair operations which may be supported include gas tungsten arc welding, gas metal arc welding, shielded metal arc welding, epoxies/composites, and mechanical/machining processes. The candidate will need to have or learn the ability to develop and interpret specifications, drawings, and engineering standards. Applicant must be able to plan and execute work programs, design experiments, analyze experimental results, and prepare technical reports. Desired Knowledge, Skills, and Abilities Candidates that have automated/mechanized gas tungsten arc welding experience and that have demonstrated acumen in executing laboratory work are preferred. Familiarity with inspection methods is a plus. Excellent individual initiative and creativity will enhance the successful candidate's value in this position. Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status or any classification protected by applicable state or local law. EEO Employer/Vet/Disabled Benefits Benefits include medical, dental, and vision insurance; short- and long-term disability insurance; pension benefits*; 401(k) retirement savings plan with employer match; life and accidental death and dismemberment (AD&D) insurance; vacation/sick/holiday pay*. *Based on eligibility rules

Nomad Health seeks an experienced Computed Tomography radiology tech for a travel assignment in PA. Take the next step in your healthcare career and join Nomad Health as a travel radiologic technologist. As a traveler with Nomad, you get access to industry-leading pay, outstanding benefits, and our knowledgeable Nomad Navigator support team. • At least one year of total experience as a radiology tech (some jobs may require more experience), • An active individual state license and/or certification to practice as a rad tech, • An active credential issued by ARRT, • Register for a Nomad Health account to view full job details and apply, • Major medical and dental plans available on your first day of work, • 401(k) with employer matching available, • Reimbursement for travel to your assignment, • Housing stipend To apply for a travel radiology technologist or x-ray technician job with Nomad Health, you must have an active ARRT certification, evidence of at least one year of Computed Tomography experience as a rad tech, and evidence of at least one year of experience within your speciality/modality within the last three years. You must have also graduated from an accredited school within your discipline, and score at least 80% on all Nomad competency assessments. We have a number of jobs to support different types of ARRT-issued certifications, including nuclear med techs, radiation therapists, and more. At Nomad, we want to give you the tools you need to succeed. Our Nomad Navigators are passionate about helping you get to the bedside as quickly and efficiently as possible. They can help you with your application, credentialing, and finding housing. Our Navigators have experience working with travel rad techs and can even help with on-the-job concerns if any arise while on assignment. In addition to real hands-on support, we have a benefits package that was explicitly built for traveling clinicians and includes a housing stipend, partial travel reimbursement, and major medical and dental plans available on your first day of work. We also have a 401(k) program with employer matching options, a user-friendly digital timekeeping process, and weekly direct deposits. With your Nomad Health account, you get access to our unique digital platform; a platform built to help you land your perfect assignment. Move your travel healthcare career forward and find your next job today. We are seeking experienced rad techs in a number of specialties to fill critical roles across the country: • Cath Lab Tech, • MRI, • CT Scan, • DEXA Scan, • Interventional Radiology, • Fluoroscopy

Nomad Health seeks an experienced Magnetic Resonance Imaging radiology tech for a travel assignment in PA. Take the next step in your healthcare career and join Nomad Health as a travel radiologic technologist. As a traveler with Nomad, you get access to industry-leading pay, outstanding benefits, and our knowledgeable Nomad Navigator support team. • At least one year of total experience as a radiology tech (some jobs may require more experience), • An active individual state license and/or certification to practice as a rad tech, • An active credential issued by ARRT, • Register for a Nomad Health account to view full job details and apply, • Major medical and dental plans available on your first day of work, • 401(k) with employer matching available, • Reimbursement for travel to your assignment, • Housing stipend To apply for a travel radiology technologist or x-ray technician job with Nomad Health, you must have an active ARRT certification, evidence of at least one year of Magnetic Resonance Imaging experience as a rad tech, and evidence of at least one year of experience within your speciality/modality within the last three years. You must have also graduated from an accredited school within your discipline, and score at least 80% on all Nomad competency assessments. We have a number of jobs to support different types of ARRT-issued certifications, including nuclear med techs, radiation therapists, and more. At Nomad, we want to give you the tools you need to succeed. Our Nomad Navigators are passionate about helping you get to the bedside as quickly and efficiently as possible. They can help you with your application, credentialing, and finding housing. Our Navigators have experience working with travel rad techs and can even help with on-the-job concerns if any arise while on assignment. In addition to real hands-on support, we have a benefits package that was explicitly built for traveling clinicians and includes a housing stipend, partial travel reimbursement, and major medical and dental plans available on your first day of work. We also have a 401(k) program with employer matching options, a user-friendly digital timekeeping process, and weekly direct deposits. With your Nomad Health account, you get access to our unique digital platform; a platform built to help you land your perfect assignment. Move your travel healthcare career forward and find your next job today. We are seeking experienced rad techs in a number of specialties to fill critical roles across the country: • Cath Lab Tech, • MRI, • CT Scan, • DEXA Scan, • Interventional Radiology, • Fluoroscopy

Nomad Health seeks an experienced Magnetic Resonance Imaging radiology tech for a travel assignment in PA. Take the next step in your healthcare career and join Nomad Health as a travel radiologic technologist. As a traveler with Nomad, you get access to industry-leading pay, outstanding benefits, and our knowledgeable Nomad Navigator support team. • At least one year of total experience as a radiology tech (some jobs may require more experience), • An active individual state license and/or certification to practice as a rad tech, • An active credential issued by ARRT, • Register for a Nomad Health account to view full job details and apply, • Major medical and dental plans available on your first day of work, • 401(k) with employer matching available, • Reimbursement for travel to your assignment, • Housing stipend To apply for a travel radiology technologist or x-ray technician job with Nomad Health, you must have an active ARRT certification, evidence of at least one year of Magnetic Resonance Imaging experience as a rad tech, and evidence of at least one year of experience within your speciality/modality within the last three years. You must have also graduated from an accredited school within your discipline, and score at least 80% on all Nomad competency assessments. We have a number of jobs to support different types of ARRT-issued certifications, including nuclear med techs, radiation therapists, and more. At Nomad, we want to give you the tools you need to succeed. Our Nomad Navigators are passionate about helping you get to the bedside as quickly and efficiently as possible. They can help you with your application, credentialing, and finding housing. Our Navigators have experience working with travel rad techs and can even help with on-the-job concerns if any arise while on assignment. In addition to real hands-on support, we have a benefits package that was explicitly built for traveling clinicians and includes a housing stipend, partial travel reimbursement, and major medical and dental plans available on your first day of work. We also have a 401(k) program with employer matching options, a user-friendly digital timekeeping process, and weekly direct deposits. With your Nomad Health account, you get access to our unique digital platform; a platform built to help you land your perfect assignment. Move your travel healthcare career forward and find your next job today. We are seeking experienced rad techs in a number of specialties to fill critical roles across the country: • Cath Lab Tech, • MRI, • CT Scan, • DEXA Scan, • Interventional Radiology, • Fluoroscopy

Nomad Health seeks an experienced Magnetic Resonance Imaging radiology tech for a travel assignment in PA. Take the next step in your healthcare career and join Nomad Health as a travel radiologic technologist. As a traveler with Nomad, you get access to industry-leading pay, outstanding benefits, and our knowledgeable Nomad Navigator support team. • At least one year of total experience as a radiology tech (some jobs may require more experience), • An active individual state license and/or certification to practice as a rad tech, • An active credential issued by ARRT, • Register for a Nomad Health account to view full job details and apply, • Major medical and dental plans available on your first day of work, • 401(k) with employer matching available, • Reimbursement for travel to your assignment, • Housing stipend To apply for a travel radiology technologist or x-ray technician job with Nomad Health, you must have an active ARRT certification, evidence of at least one year of Magnetic Resonance Imaging experience as a rad tech, and evidence of at least one year of experience within your speciality/modality within the last three years. You must have also graduated from an accredited school within your discipline, and score at least 80% on all Nomad competency assessments. We have a number of jobs to support different types of ARRT-issued certifications, including nuclear med techs, radiation therapists, and more. At Nomad, we want to give you the tools you need to succeed. Our Nomad Navigators are passionate about helping you get to the bedside as quickly and efficiently as possible. They can help you with your application, credentialing, and finding housing. Our Navigators have experience working with travel rad techs and can even help with on-the-job concerns if any arise while on assignment. In addition to real hands-on support, we have a benefits package that was explicitly built for traveling clinicians and includes a housing stipend, partial travel reimbursement, and major medical and dental plans available on your first day of work. We also have a 401(k) program with employer matching options, a user-friendly digital timekeeping process, and weekly direct deposits. With your Nomad Health account, you get access to our unique digital platform; a platform built to help you land your perfect assignment. Move your travel healthcare career forward and find your next job today. We are seeking experienced rad techs in a number of specialties to fill critical roles across the country: • Cath Lab Tech, • MRI, • CT Scan, • DEXA Scan, • Interventional Radiology, • Fluoroscopy

Nomad Health seeks an experienced Radiography radiology tech for a travel assignment in PA. Take the next step in your healthcare career and join Nomad Health as a travel radiologic technologist. As a traveler with Nomad, you get access to industry-leading pay, outstanding benefits, and our knowledgeable Nomad Navigator support team. • At least one year of total experience as a radiology tech (some jobs may require more experience), • An active individual state license and/or certification to practice as a rad tech, • An active credential issued by ARRT, • Register for a Nomad Health account to view full job details and apply, • Major medical and dental plans available on your first day of work, • 401(k) with employer matching available, • Reimbursement for travel to your assignment, • Housing stipend To apply for a travel radiology technologist or x-ray technician job with Nomad Health, you must have an active ARRT certification, evidence of at least one year of Radiography experience as a rad tech, and evidence of at least one year of experience within your speciality/modality within the last three years. You must have also graduated from an accredited school within your discipline, and score at least 80% on all Nomad competency assessments. We have a number of jobs to support different types of ARRT-issued certifications, including nuclear med techs, radiation therapists, and more. At Nomad, we want to give you the tools you need to succeed. Our Nomad Navigators are passionate about helping you get to the bedside as quickly and efficiently as possible. They can help you with your application, credentialing, and finding housing. Our Navigators have experience working with travel rad techs and can even help with on-the-job concerns if any arise while on assignment. In addition to real hands-on support, we have a benefits package that was explicitly built for traveling clinicians and includes a housing stipend, partial travel reimbursement, and major medical and dental plans available on your first day of work. We also have a 401(k) program with employer matching options, a user-friendly digital timekeeping process, and weekly direct deposits. With your Nomad Health account, you get access to our unique digital platform; a platform built to help you land your perfect assignment. Move your travel healthcare career forward and find your next job today. We are seeking experienced rad techs in a number of specialties to fill critical roles across the country: • Cath Lab Tech, • MRI, • CT Scan, • DEXA Scan, • Interventional Radiology, • Fluoroscopy

Trustaff Allied is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, evenings Trustaff Allied Job ID #875362. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Nuclear Med Technologist About Trustaff Allied Our traveler-first attitude has set us apart from other travel healthcare agencies When you join the Trustaff family, you’re more than just a body filling a role—you're a vibrant individual with dreams and aspirations. As one of the nation's leading travel healthcare companies, your recruiter will work with you one-on-one to guide your career and help you achieve your goals. • You decide when and where you want to work, • Enjoy industry-leading pay, benefits, and bonuses, • Experience new people and places, • Grow your clinical skills and expand your experience Travel healthcare lets you take your professional career to the next level while maintaining your flexibility and freedom. At Trustaff, we put you first, so you never have to compromise your work or pay. We are proud to have one of the highest nurse retention rates in the country. Some of the other reasons people choose us include: • Priority access to thousands of travel healthcare jobs, • Industry-leading pay, • Guaranteed weekly hours, • Experienced recruiters, • Comprehensive benefits, including medical, dental, and vision, • 401k with employer match, • Assistance with travel, compliance, and housing, • Great bonuses for completions, referring friends, and more Benefits • Dental benefits, • Medical benefits, • Vision benefits, • Guaranteed Hours

ARMStaffing is seeking a travel CT Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, flexible Location: Pittsburgh, PA Shift: Various shifts, including (2) 12-hour shifts and (2) 8-hour shifts weekly, with daylight and evening options. Weekend coverage required, rotating every other or every third weekend based on departmental needs. Assignment Length: 90 Days Hours per Week: 40 Hours Job Description: We are seeking a skilled CT Technologist to join our imaging team. The ideal candidate will perform a variety of imaging procedures at a technical level that does not require constant supervision. You will be responsible for: • Competently executing a range of technical procedures, utilizing independent judgment, ingenuity, and initiative., • Applying prescribed ionizing radiation for diagnostic imaging purposes., • A current ARRT Certificate or Nuclear Medicine Technologist Certification (NMTC)., • Basic Life Support (BLS) or Cardiopulmonary Resuscitation (CPR)., • Previous experience with GE Scanners is required., • Strong technical and communication skills., • Health & Retirement Benefits: Day-1 access to extensive benefits, including Medical, Vision, Dental, Life, and more., • Complimentary Onboarding: We pay your way through onboarding, including Physicals, TITERS, and everything else. A dedicated Onboard Specialist will schedule your appointments, allowing you to focus on patient care while we facilitate your rapid start., • On-Call Support: 24/7, 365 days a year. Our experienced team across healthcare practices is available for immediate clinical support., • 401k Retirement Savings Plan: After a qualifying waiting period, employees are eligible for 401k. Employees that contribute at least 5% will receive a 4% company match. We're not the only ones who think ARMStaffing should be your first choice, here's why: • SIA's Top-50 Fastest Growing Healthcare Staffing Firms — 2019, • SIA's Largest Healthcare Staffing Agencies in the U.S. — 2023, • Celebrated as a Top Workplace in the Lehigh Valley — 2022, 2023, • Perfect scores for 'Name, Not a Number' and 'Recruiters' Personalities' on Highway Hypodermics ARMStaffing Job ID #33406745. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology:CT Tech,19:00:00-07:00:00 About ARMStaffing Allied Resources Medical Staffing (ARMStaffing) places the most qualified medical professionals in the industry, including: local and travel contract, temp-to-perm, per diem, and direct-hire personnel. \n As a leader in medical staffing, we cover every segment of the healthcare market and take pride in our ability to exceed our clients' expectations. We accomplish this through our total dedication to our clients and field associates, our over 15 years of experience, a strong and diverse poor of medical professionals, and the high level of loyalty of our internal staff. \n We also make it a point to develop and maintain close relationships with staffing and office managers to ensure clear communication and proper placements based on the client's criteria. This allows us to tailor our services to best suit the staffing needs of our clients, while placing our employees in positions that match their abilities and preferences. \n Our goal is to offer unparalleled service to our valued healthcare clients, regardless of facility size or location, and to maintain a top-notch workforce of qualified, dedicated and medical professionals. \n The Experts in Healthcare Recruiting \n\n • Local and travel contracts\n, • Temp-to-perm employment\n, • Direct-hire personnel\n, • Per Diem\n, • Staffing for every segment of the healthcare industry including, RNs, LPNs, and CNAs, and Allied Health Professionals\n, • Long-term contracts, block scheduling and per diem staffing options\n, • 24-Hour customer service and on-call support 365 days a year\n, • Full-time, registered nurse on staff to provide screening, background, and reference checks\n, • Long-term and temporary career options with outstanding employee benefits\n, • Medical Benefits\n, • Company-matched 401K\n\n

Medical Solutions Allied is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days We’re seeking talented healthcare professionals whose adventure game is as strong as\n their clinical game. Those that want flexibility and high pay, we have the positions for\n you! \n \n Some of the industry-leading benefits enjoyed by Medical Solutions travel nurses and\n travel allied healthcare professionals include: \n\n \n • Day One Medical, Dental, and Vision with low premiums\n, • Day One 401(k) with Company Contribution\n, • Personalized Compensation Packages\n, • Paid, Private, Fully Furnished, Pet-Friendly Housing\n, • Dedicated Recruiter and 24/7 Customer Care Line\n, • Per Diem Allowance and Paid Travel\n, • Licensure and Certification Reimbursement\n, • Free Liability Coverage\n, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident, and Pet Insurance\n, • Equal Employment Opportunity\n, • Discount program, • Life insurance, • Mileage reimbursement, • Company provided housing options, • License and certification reimbursement, • Benefits start day 1, • Continuing Education, • Guaranteed Hours, • Vision benefits, • Referral bonus, • 401k retirement plan, • Dental benefits, • Cancelation protection, • Weekly pay, • Medical benefits, • Employee assistance programs, • Wellness and fitness programs, • Pet insurance, • Holiday Pay

Rang Healthcare is seeking a travel MRI Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: MRI Technologist, • Discipline: Allied Health Professional, • Start Date: 09/15/2025, • Duration: 12 weeks, • 40 hours per week, • Shift: 8 hours, evenings, nights, • Employment Type: Travel Job Description Maneuvering the MRI equipment and positioning it to capture the correct images. Monitoring patients during scanning and maintaining patients' records. Monitoring MRI equipment functions. Ensuring clear images for physicians to provide accurate diagnosis. MRI Technologist Shift Times: Could work evening or overnight, 8 hr OR 10hr shifts are possible. Weekends included. Shift Days: Sunday through Saturday ARRT Certificate OR Nuclear Medicine Technologist Certification (NMTC) OR Registered Diagnostic Medical Sonographer (ARDMS) Basic Life Support (BLS) OR Cardiopulmonary Resuscitation (CPR) Act 34 ACT 33 ACT 73. “We are an equal opportunity employer. It is our policy to provide employment, compensation, and other benefits related to employment without regard to race, color, religion, sex, gender, national or ethnic origin, disability, veteran status, age, genetic information, citizenship, or any other basis prohibited by applicable federal, state, or local law.” About Rang Healthcare Founded in 2005, Rang Healthcare (a division of Rang Technologies Inc) has been staffing clients for over 17 years for administrative, nursing and IT/Systems. Rang Healthcare offers extensive recruiting experience in a cost-effective manner. We help institutions successfully reduce complexity, boost productivity, and enhance patient outcomes. We provide the specialized talent and expertise you require, whether it’s for a direct hire, contract-to-hire, or contract position. It is now even more vital to collaborate with a firm that has the knowledge and expertise to provide the best in class and most qualified personnel. You can count on the Rang Healthcare for talent acquisition. We are an equal opportunity employer. It is our policy to provide employment, compensation, and other benefits related to employment without regard to race, color, religion, sex, gender, national or ethnic origin, disability, veteran status, age, genetic information, citizenship, or any other basis prohibited by applicable federal, state, or local law. Benefits • 401k retirement plan, • Dental benefits, • Referral bonus, • Vision benefits, • Weekly pay

Host Healthcare is seeking a local contract Nuclear Medicine Technologist for a local contract job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours We are on a mission to help others live better and we do this by helping the healers of the world be as comfortable as possible. With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruiters find your dream position based on what’s important to you. During your assignment, get access to premium benefits, including Day 1 medical that continues up to 30 days between assignments, 401K matching, travel reimbursements, dedicated housing support, and more. We also offer 24/7 support from our team and access to our on-staff clinicians so you can feel comfortable and confident throughout your entire assignment. Travel comfortably with Host Healthcare. Benefits • Referral bonus, • School loan reimbursement, • Vision benefits, • Wellness and fitness programs, • Company provided housing options, • License and certification reimbursement, • Life insurance, • Medical benefits, • Mileage reimbursement, • Pet insurance, • Discount program, • Employee assistance programs, • Guaranteed Hours, • Health savings account, • Holiday Pay, • 401k retirement plan, • Continuing Education, • Dental benefits

Triage Staffing is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, nights Apply for specific facility details.Nuc Med Tech Triage Staffing Job ID #VJL9XCXQ. Posted job title: Radiology: Nuclear Medicine Tech About Triage Staffing At Triage, we prefer to be real. Real about expectations—both ours and yours. Real about how a decision you make today could affect your tomorrows. Real about how compensation actually works. Real about how great—or grating—your next supervisor may be. Being real allows everyone at Triage to be ready. Ready to serve you with real honesty. So if that gig near the ocean is really no day at the beach, or that third shift comes with a second-class rate, we tell you. So you can be ready, too. We staff all five major divisions of acute care—nursing, lab, radiology, cardiopulmonary and rehab therapy, offering: • Competitive, custom pay packages, • One point of contact for both travelers and facilities (per division), • A reliable recruiter who's got your back throughout your entire assignment, • In-house compliance and accounting specialists, • A clinical liaison team available 24/7 to offer medical and professional support and career development, • A mentoring program that is run and managed by actual clinicians—yeah, you read that right, • And more (because of course there’s more) Are we the biggest? No. Are we the best? That’s rather subjective, but we’re trying to be. Will we work like hell to get you as close to your idea of heaven as possible? Yes. Yes, we will. Benefits: • Day One comprehensive, nationwide insurance plans for health, vision and dental and life—including a HSA option, • Day One 401(k) program with employer-matching contributions once eligible, • Facility cancelling protection—your time is money on and off-the-clock, • Guaranteed hours, • Weekly paychecks via direct deposit, • Earned vacation bonuses for time worked, • Paid holidays, • Employee assistance program (EAP)—your mental health is important, too, • Continuing education, certification and licensing reimbursement, • Workers comp—because accidents happen, • Top-rated professional liability insurance, • Company provided housing options, • Referral bonus—$750 in your pocket after they’ve completed a 13-week assignment

Care Career is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days Care Career Job ID #32134896. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology/Imaging:Nuclear Med Tech,07:00:00-15:00:00 About Care Career Care Career brings together a portfolio of leading healthcare staffing organizations, each delivering specialized talent solutions across the industry. Wherever you want to go, We Make It Happen. With travel nursing jobs across the country, you can discover the possibilities that create the lifestyle and financial position that you have dreamed of. Care Career is a modern, transparent staffing firm creating the ultimate community of US. Benefits • Referral bonus, • Weekly pay, • Medical benefits, • Continuing Education, • Dental benefits, • Vision benefits

Medical Solutions Allied is seeking a travel CT Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, evenings We’re seeking talented healthcare professionals whose adventure game is as strong as\n their clinical game. Those that want flexibility and high pay, we have the positions for\n you! \n \n Some of the industry-leading benefits enjoyed by Medical Solutions travel nurses and\n travel allied healthcare professionals include: \n\n \n • Day One Medical, Dental, and Vision with low premiums\n, • Day One 401(k) with Company Contribution\n, • Personalized Compensation Packages\n, • Paid, Private, Fully Furnished, Pet-Friendly Housing\n, • Dedicated Recruiter and 24/7 Customer Care Line\n, • Per Diem Allowance and Paid Travel\n, • Licensure and Certification Reimbursement\n, • Free Liability Coverage\n, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident, and Pet Insurance\n, • Equal Employment Opportunity\n, • Discount program, • Life insurance, • Mileage reimbursement, • Company provided housing options, • License and certification reimbursement, • Benefits start day 1, • Continuing Education, • Guaranteed Hours, • Vision benefits, • Referral bonus, • 401k retirement plan, • Dental benefits, • Cancelation protection, • Weekly pay, • Medical benefits, • Employee assistance programs, • Wellness and fitness programs, • Pet insurance, • Holiday Pay

FlexCare Allied is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 09/29/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, rotating Since 2006, FlexCare has been committed to helping address critical personnel needs in healthcare, ensuring facilities have access to the best clinical talent to meet patient needs while unlocking career opportunities for travel clinicians and supporting them to provide the highest level of patient care possible. For clinicians, we open doors to rewarding travel assignments with top facilities nationwide, backed by dedicated support every step of the way. For healthcare facilities, we provide access to exceptional talent when and where they need it most. We are more than a staffing agency – we're a trusted healthcare partner who builds meaningful relationships to improve lives, advance careers, and set the standard for excellence in healthcare talent management. What Makes FlexCare Different: · Single Point of Contact for All You Need: Our clinicians always have a dedicated recruiter who handles everything, saving them time, reducing their stress, and building lasting relationships. · Fast-Track to Travel Platform: Our platform offers our clinicians an all-in-one hub for finding assignments, managing credentials, and streamlining their travel careers. · Pay Package Peace of Mind : We present our clinicians with the best offer, up front. Eliminating the back-and-forth and uncertainty, and ultimately placing them into an assignment, faster. · Award-Winning Team That Goes Above & Beyond: Our clinicians have an entire team of healthcare experts, ranked top in the industry, to support their success, from payroll to clinical support to compliance. FlexCare pushes beyond healthcare staffing through our high-touch, high-results approach. We’re leaders in healthcare talent management who focus on what matters most - matching the right clinicians with the right facilities to deliver quality patient care. Benefits • Medical benefits, • Dental benefits, • Vision benefits

Health Carousel - Travel Allied is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, flexible, • Weekly pay, • Holiday Pay, • 401k retirement plan, • Company provided housing options, • Wellness and fitness programs, • Mileage reimbursement, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1, • License and certification reimbursement, • Life insurance, • Discount program

Host Healthcare is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours We are on a mission to help others live better and we do this by helping the healers of the world be as comfortable as possible. With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruiters find your dream position based on what’s important to you. During your assignment, get access to premium benefits, including Day 1 medical that continues up to 30 days between assignments, 401K matching, travel reimbursements, dedicated housing support, and more. We also offer 24/7 support from our team and access to our on-staff clinicians so you can feel comfortable and confident throughout your entire assignment. Travel comfortably with Host Healthcare. Benefits • Referral bonus, • School loan reimbursement, • Vision benefits, • Wellness and fitness programs, • Company provided housing options, • License and certification reimbursement, • Life insurance, • Medical benefits, • Mileage reimbursement, • Pet insurance, • Discount program, • Employee assistance programs, • Guaranteed Hours, • Health savings account, • Holiday Pay, • 401k retirement plan, • Continuing Education, • Dental benefits

We. Are. OneStaff. Medical. An independently-owned, nationally-recognized and amazingly awesome staffing firm ready to work for you! A work ethic forged in the Midwest, we are here to stand by your side and help you find your dream assignment anywhere in this great country. We want the same like-minded, awesome candidates to travel with us. Be bold. Enjoy work again. Let us help. THE POSITION: Medical Physicists use a variety of analytical, computer-aided and bioengineering techniques in their work such as radiotherapy, x-ray imaging, ultrasound, tomography, radiology, nuclear magnetic resonance imaging and lasers. They work with patients and with a wide range of medical, technical and administrative staff. *Weekly amount stated in the job postings is scaled based on estimated hourly wages and potential stipends available for the location of the assignment. Hourly wages are based on various factors including but not limited to: experience, demand, availability, location, etc. Please contact one of our amazing OneStaff Recruiting Specialists for more details. Equal Opportunity Employer Requirements: Minimum of 1 year of current work experience providing in PSYCH. Pennsylvania State Healthcare Provider license or willing to obtain one. Certifications Needed: This position may require one or more of these certifications: BLS BENEFITS: Insurance We provide group benefits for Health, Dental, Vision, Life, Short Term Disability, Long Term Disability, Accident, Critical Illness, and Identity Theft Protection. 401K You are eligible to enroll 1st of the month following hire date. We match 100% of your first 3% of deferrals and an additional 50% of the next 2% you contribute. Employee Assistance Program Free to all employees who’d like information on personal issues: Education, Dependent Care, Care Giving, Legal, Financial, Lifestyle & Fitness Management, Working Smarter.

AMN Healthcare Allied is seeking a travel CT Technologist for a travel job in PITTSBURGH, Pennsylvania. Job Description & Requirements • Specialty: CT Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days, evenings, nights \nCT tech needed in Pittsburg, PA.\nJob Description: Performs imaging procedures at a technical level not requiring constant supervision. Competently performs a variety of technical procedures that require independent judgment, ingenuity and initiative to apply prescribed ionizing radiation for diagnostic purposes.\n\nLicenses/Clearances:\nARRT Certificate OR Nuclear Medicine Technologist Certification (NMTC)\nBasic Life Support (BLS) OR Cardiopulmonary Resuscitation (CPR)\n Required Qualifications CT Technologist, Computed Tomography Certifications(At least one of the following): CTTECH-American Registry of Radiologic Technologists, N-Nuclear Medicine Technology Certification Board SSN Required DOB Required\n\nBLS\n Preferred Qualifications NA\n\n Facility Location With its gorgeous waterfront views, abundance of museums and great location it is no wonder that Pittsburgh was named “America’s Most Livable City” by Places Rated Almanac. A comprehensive medical network, robust economy and low cost of living lend plenty of opportunity for travelers. Stroll through one of the city’s expansive green parks or root for the Steelers or Pirates on game day—the fun activities are unlimited. \n \nJob Benefits\n \nAllied travel assignments are typically for 13 weeks and offer generous packages that include: • Competitive pay rates, • Medical, Dental, Vision, • 401(k) and Flex Spending, • Life Insurance, • Accident and Short-term Disability Coverage, • Free Continuing Education, • Competitive Housing Deal, • Refer a friend and earn extra cash!\n \nAbout the Company\n \nAt AMN Healthcare, we strive to be recognized as the most trusted, innovative, and influential force in helping healthcare organizations provide quality patient care that continually evolves to make healthcare more human, more effective, and more achievable.\n Computed Tomography Technologist, CT tech, CT technologist, computed tomography tech, CT, radiology, radiologic technologist, radiologic, allied health, healthcare, health care, allied, medical, hospital, patient care, ct, computed tomography\n AMN Healthcare Allied Job ID #3280024. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Computed Tomography Technologist - (CT Tech) About AMN Healthcare Allied AMN Healthcare is a leading force in the healthcare industry, committed to being the most trusted, innovative, and influential partner for healthcare organizations. With a focus on providing quality patient care, AMN Healthcare offers holistic solutions that reduce costs, streamline processes, and improve efficiencies. The company boasts over 30 years of experience and takes pride in staffing leading healthcare facilities with the nation's best travelers. As an industry leader, AMN Healthcare offers a diverse team dedicated to supporting healthcare workers and facilities, ensuring a personalized and supportive experience for both clients and candidates. Visit for more information. Benefits • Company provided housing options, • Medical benefits, • Dental benefits, • Continuing Education

Planet Healthcare is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Job Description & Requirements • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 12 weeks, • 40 hours per week, • Shift: 8 hours Planet Healthcare is a global leader in clinical staffing because we take a candidate-first approach. We pride ourselves on a consultative method and help to create the right opportunity, at the right time, with each healthcare professional. The recruitment engine at Planet Healthcare is driven by leaders in this market, who understand the market demands and trends within your specialty. With a wide array of job opportunities and geographic diversity in our client base, we are your advocate and will work to find the best position for you. We are ready to go to work. Welcome to Planet Healthcare. Our Methodology Let’s face it; finding a new job can be scary. Whether you’re currently employed or in between positions, the search can feel overwhelming. If you’re looking for support, guidance and an upper-hand on the competition, you’ve come to the right place. We know that not every job, company or commute is right for everyone, so Planet Healthcare recruiters are trained to not only discuss our open job orders, but to find out about your search and take a proactive approach to the market. Our recruiters are experts in this industry and we are your advocate and partner during your job search. We look forward to working with you soon. CLEVELAND | CHICAGO | RALEIGH | BOSTON | PHOENIX Benefits • Medical benefits, • Vision benefits, • Dental benefits, • 401k retirement plan, • Weekly pay, • Referral bonus

Job DescriptionPosition: Maintenance Technician Location: Camden, NJ-Advanced Manufacturing Division; East Pittsburgh, PA-Holtec Manufacturing Division; Orville, OH-Orrvilon Manufacturing Division Holtec International is seeking qualified Maintenance Technicians to join its Manufacturing Operations team. The Maintenance Technician will play a key role in ensuring the reliability, safety, and efficiency of production equipment and facility systems. This hands-on position will support daily operations by maintaining, installing, troubleshooting, and repairing a wide range of industrial machinery and systems critical to Holtec’s manufacturing activities. Ideal candidates will demonstrate strong mechanical aptitude, problem-solving skills, and a proactive mindset to support both routine preventive maintenance and urgent repair needs. This role involves working collaboratively with operations, engineering, and safety personnel in a dynamic manufacturing environment. Maintenance Technicians must be capable of interpreting technical documentation, performing root cause analyses, and contributing to continuous improvement initiatives. Minimum required qualifications include: a minimum of 3 years of maintenance or industrial experience, including relevant military or technical training. Demonstrated experience in troubleshooting and maintaining hydraulic, pneumatic, electrical, lubrication, and power transmission systems. Ability to read and interpret technical instructions, diagrams, equipment manuals, and schematics. Strong understanding of safety procedures in an industrial setting. High School Diploma or GED required. Physical ability to support shop-floor operations, including lifting up to 50 pounds, climbing, kneeling, and working in potentially adverse environmental conditions. Additional desirable qualifications: Technical certification or associate degree in industrial maintenance or related field. Experience with overhead cranes, mobile equipment, and welding support equipment. Working knowledge of electrical schematics, motor control systems, and PLC troubleshooting. Familiarity with CMMS (Computerized Maintenance Management Systems). Previous experience in a manufacturing environment subject to quality standards and safety regulations. Specific Areas of Responsibility: Perform routine and emergency maintenance on mechanical and electrical systems, ensure minimal downtime and optimal equipment performance. Install, repair, and upgrade production machinery and auxiliary systems according to operational needs and safety standards. Conduct equipment inspections and preventive maintenance tasks to identify wear, damage, or failure risks. Support the commissioning and decommissioning of machinery, including disassembly and reassembly of critical components. Assist in maintaining accurate records of maintenance work, repair history, parts usage, and equipment reliability. Participate in continuous improvement initiatives related to safety, efficiency, and operational uptime. Ensure compliance with applicable safety codes and internal procedures during all maintenance activities. Work closely with Maintenance Manager, Shop Managers, and Production Supervisors to prioritize tasks and resolve technical issues. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Powered by JazzHR pGCsbWnp1q

Job DescriptionSalary: Mackin Engineers & Consultants is a leading engineering firm providing civil engineering solutions for infrastructure projects throughout the eastern United States. Mackin specializes in highway engineering, structural engineering design & inspection, traffic engineering, construction inspection and management, planning, landscape architecture, and land development services with three offices located in Pittsburgh, Harrisburg, and West Virginia. With a commitment to excellence and innovation, we strive to deliver high-quality, sustainable solutions that meet our clients needs and exceed their expectations. Job Description: Mackin Engineers & Consultants is seeking a qualified Transportation Construction Inspector Supervisor 1 (TCIS-1) in our Pittsburgh, PA office. The TCIS-1 will be responsible for conducting roadway and bridge construction inspections, ensuring compliance with contract requirements, plans, specification, and cost estimates. This position requires extensive travel, with up to 75% of time spent on-site at various construction locations. Responsibilities: • Perform thorough roadway and bridge construction inspections including grade elevations, stakeouts, asphalt or concrete work, drainage, signage, traffic control, and excavation., • Coordinate construction inspection activities, including assigning tasks, providing guidance, and conducting performance evaluations., • Perform calculations, interpret plans, measure quantities, review quality control plans, and generate reports., • Review and interpret construction plans, drawings, and technical documents., • Observe and conduct tests on aggregates, compaction, specific gravities, and more at plants or construction sites., • Package material samples for shipping and document sampling and testing procedures., • Operate nuclear guage and perform compaction control inspection on projects., • Analyze rock and soil properties, including moisture, density, and elevation., • Communicate effectively with project stakeholders, including contractors, engineers, and government officials., • Document and report construction activities, progress, and issues encountered during inspections., • Ensure compliance with safety regulations and procedures on construction sites., • Assist in resolving construction-related disputes and issues as they arise., • Provide technical expertise and guidance to construction inspection team members., • Advise management of new developments which may affect profit, schedule, costs, client relations, and/or inter-departmental relations. Qualifications: • Minium of 5 years of experience in transportation construction inspection or related field. Experience with PennDOT, PA Turnpike, Municipal, and/or water line/sewer line projects desired., • High school diploma required, Associates or Bachelors degree in civil engineering or related field preferred, but not required., • Proficiency in reading and interpreting construction plans, specifications, and technical documents., • Strong organizational and multitasking skills, with the ability to prioritize and manage multiple projects simultaneously., • Knowledge of Deltek Ajera, Microsoft Office (Word, Excel, and Outlook), and familiarity using Computers, Printers, and Electronics., • Excellent communication and interpersonal skills, with the ability to effectively collaborate with diverse teams., • Knowledge of construction materials, methods, and practices., • Ability to travel extensively, with up to 75% of time spent on-site at construction locations., • Valid drivers license and reliable transportation., • Relevant certifications (e.g. EIT/FE, PE, NICET Highway Construction, NECEPT, PennDOT Concrete/ACI, CDS NextGen, KAHUA, SSPC-C3, NACE Coating Inspector (Levels 1, 2, or 3), NASSCO (PACP, MACP, LACP, OR ITCP), Nuclear Densometer (Nuke Gage). Benefits at Mackin: • Comprehensive benefits package includes:, • Medical, dental, and vision insurance, • Accident Insurance, Hospital Confinement, and Critical Illness, • Voluntary Term Life Insurance, Short-Term & Long-Term Disability, • Legal Plan and ID Theft Protection, • Pet Insurance, • Group Life/AD&D, • CollegeAmerica 529 Savings Plan, • Profit Sharing and 401(k) company match, • Tuition and certification reimbursement, • Generous Paid Time Off and 8 paid holidays Equal Opportunity Employer Statement: Mackin Engineers & Consultants is an equal opportunity employer and is committed to providing equal employment opportunities to all individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age disability, or veteran status. We value diversity and inclusion and strive to create a work environment that is welcoming and inclusive for all employees. All qualified applicants will receive consideration for employment without regard to their protected status.

Job DescriptionPosition: NDE Level III Specialist Place of Work: Camden, NJ; Advanced Manufacturing Division or East Pittsburgh, PA; Holtec Manufacturing Division Holtec International is seeking highly qualified NDT Level III Inspectors to join its Quality and Nondestructive Examination (NDE) team. The Level III Inspector will play a vital role in ensuring product and process compliance with both customer and industry specifications across Holtec’s manufacturing operations, supporting a broad portfolio of components and systems in the nuclear, clean energy, and heavy industrial sectors. The NDT Level III will be responsible for managing and overseeing NDT operations, qualifying and certifying personnel, writing and reviewing procedures, performing inspections, and supporting internal and external audits. This position will serve as the technical authority for assigned NDT methods and will work closely with engineering, quality, and production teams to support manufacturing processes and ensure compliance with industry standards and regulatory codes. Minimum required qualifications include a High School Diploma or GED equivalent. Minimum of five (5) years of NDT inspection experience as a certified Level II in Radiography (RT) or other applicable methods. Current or prior certification as ASNT Level III in at least Radiographic Testing (RT) and ideally one or more of the following: UT, PT, MT, VT. Strong understanding of real-time X-ray inspection systems, digital radiography (DR), and interpretation techniques. Demonstrated knowledge of quality system requirements such as ASME Section III, NQA-1, ISO 9001, and AS9100. Competency in reading and interpreting engineering drawings, technical procedures, and specifications. Proficiency with Microsoft Office (Word, Excel, Outlook) and familiarity with NDT imaging software. Additional desirable qualifications an associate or bachelor’s degree in a technical field such as Mechanical Engineering, Materials Science, or Non-Destructive Testing. Experience in the nuclear or aerospace industries and familiarity with stringent regulatory compliance standards. Previous possession of a Radiographer’s Card and formal Radiation Safety training. Multi-method Level III certification (VT, MT, PT, UT, RT) strongly preferred. Experience with advanced NDT techniques (e.g., phased array, computed radiography). Familiarity with audit preparation, supplier NDT oversight, and third-party certifications. Specific Areas of Responsibility: Serve as the NDT technical authority for assigned methods including Radiographic Testing (RT), Ultrasonic Testing (UT), Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT), and Visual Testing (VT). Develop, write, review, and approve NDT procedures in accordance with applicable codes (ASME Section III, V, and IX; ANSI; AWS; NQA-1; NAS-410; and ASNT SNT-TC-1A). Train, qualify, and certify NDT personnel in accordance with internal written practice and ASNT SNT-TC-1A or NAS-410. Provide oversight and guidance to NDT Level I and II inspectors and ensure compliance with customer and code requirements. Conduct and interpret real-time radiographic inspections using both film and digital imaging systems, ensuring accurate evaluation of component integrity. Review and approve NDT results, data packages, and inspection records. Interface with project engineers, quality managers, and customers to resolve non-conformances and inspection-related issues. Support root cause analysis and corrective action processes related to inspection or quality issues. Maintain and calibrate NDT equipment and ensure X-ray radiation safety compliance, including maintenance of safety logs and monitoring devices. Assist in internal and external audits, including vendor surveillance and supplier qualification activities. Participate in the qualification of new manufacturing techniques or components involving NDT support. Maintain accurate documentation of all inspections and procedures. Ensure alignment with Holtec’s safety, quality, and regulatory objectives. Travel up to 30–40% as required for audits, inspections, or field services. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Powered by JazzHR u802kHHdvI

Job DescriptionSalary: Mackin Engineers & Consultants is a leading engineering firm providing civil engineering solutions for infrastructure projects throughout the eastern United States. Mackin specializes in highway engineering, structural engineering design & inspection, traffic engineering, construction management, planning, landscape architecture, land development, graphic design, and information technology services with three offices located in Pittsburgh, Harrisburg, and West Virginia. With a commitment to excellence and innovation, we strive to deliver high-quality, sustainable solutions that meet our clients needs and exceed their expectations. Job Description: Mackin Engineers & Consultants is seeking a seasoned Transportation Construction Inspector 3 (TCI-3) in our Pittsburgh, PA office. This position requires extensive experience in the construction inspection field, particularly with roadway and bridge projects. The ideal candidate will be proficient in monitoring various phases of construction activities, ensuring compliance with all project specifications, plans, and contract agreements. Responsibilities: • Perform detailed inspections of infrastructure projects, including roads, bridges, and associated structures, to ensure compliance with all applicable codes, standards, and specifications., • Document inspection findings and communicate necessary changes to construction crews and project managers to ensure timely and accurate project completion., • Utilize and maintain proficiency with a variety of inspection tools and equipment to accurately measure materials and conditions., • Manager and monitor contractor performance to ensure project deliverables are achieved within the defined scope, time, and cost constraints., • Engage in continuous education and training to maintain and upgrade certification levels and professional knowledge., • Travel to various project sites as required, managing responsibilities with up to 75% travel. Qualifications: • Minimum of 5 years of construction inspection experience., • High school diploma is mandatory; Associates (AS) or Bachelors Degree (BS) in Civil Engineering, Construction Management, or a related field is preferred., • Knowledge of Electronic Construction Management System (ECMS) and PennDOT., • Familiarity with all PennDOT design and construction publications., • Experience using Deltek Ajera. Microsoft Office Word, Excel, and Outlook., • Desired Certificates include: EIT/FE, PE, NICET Highway Construction, NECEPT, PennDOT Concrete/ACI, CDS NextGen, KAHUA, SSPC-C3, NACE Coating Inspector (Level 1, 2, or 3), NASSCO (PACP, MACP, LACP, or ITCP), Nuclear Densometer (Nuke Gage). Benefits at Mackin: • Comprehensive benefits package includes:, • Medical, dental, and vision insurance, • Accident Insurance, Hospital Confinement, and Critical Illness, • Voluntary Term Life Insurance, Short-Term & Long-Term Disability, • Legal Plan and ID Theft Protection, • Pet Insurance, • Group Life/AD&D, • CollegeAmerica 529 Savings Plan, • Profit Sharing and 401(k) company match, • Tuition and certification reimbursement, • Generous Paid Time Off and 8 paid holidays Equal Opportunity Employer Statement: Mackin Engineers & Consultants is an equal opportunity employer and is committed to providing equal employment opportunities to all individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age disability, or veteran status. We value diversity and inclusion and strive to create a work environment that is welcoming and inclusive for all employees. All qualified applicants will receive consideration for employment without regard to their protected status.

Job Description Independent Medical Center seeks a Cardiologist to work near Indiana, PA (1hr from Pittsburgh!) 843 494 1253 About Group: • This group is a medium sized independent community health system, • Physician led and quality oriented group that values their physicians, • This group offers fantastic independence and physician oriented leadership, • Founded in 1914 with over 1,400 employees, • 20 locations in the surrounding Pittsburgh suburbs Benefits and Features: Cardiologist • Excellent Base Salary, • Sign On Bonus: 30K, • Production/Quality Bonuses: Negotiable, • Malpractice and Licensing fees paid, • CME Allowance, • Comprehensive Medical and Retirement benefits, • Life Insurance and Disability, • Loan Reimbursement - 125K over 5 years, • Marketing/Practice growth assistance, • 5 Weeks of PTO, 6 Paid Holidays, • H1B Visa opportunities cap exempt Providers Role with the Company: Cardiologist • Location: Indiana, PA, • Seeking Noninvasive Cardiologist to join an existing hospital-employed Cardiology practice, • Four physicians and two physician assistants for succession planning and growth, • Access to stress test, ECG, echo and nuclear reading panels, • TEE and Cardioversion also available, • 1 in 4 Call (Not in house) Background Profile: Cardiologist • Board Certified or Board Eligible in Cardiology, • Ability to have PA state medical license, • Great at relationship building, both with patients and colleagues, • H1B Visa Sponsorship if necessary or J1 About the Area: Indiana, Pennsylvania is located 1 hour east of Pittsburgh. Indiana is home to Indiana University of Pennsylvania (IUP), a public university founded in 1875. For public K-12 education, the Indiana Area School District supports four elementary schools, a junior high school, and a high school, which are accredited and recognized for quality. Indiana is also home to several parks and recreation areas, including the Indiana County Fairgrounds, the Indiana County Parks and Recreation Department, and the Indiana Rail Trail. Easy access to Pittsburgh allows for big city entertainment, restaurants, night life, and sporting events. All the while, Indiana is a charming town with a rich history and culture. It is a great place to live, work, and raise a family. FOR MORE INFORMATION CONTACT: 843 494 1253

Job Description Navarro Research and Engineering is recruiting for a Manufacturability Engineer in West Mifflin, PA. A DOE L clearance or DOD equivalent is required to be considered for this role. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense. The Naval Nuclear Laboratory develops advanced naval nuclear propulsion technology for thesafety and reliability of our Navy’s submarine and aircraft fleet. Our company is looking for anexperienced Mechanical Engineer to join our Manufacturability team as part of the PropulsionPlant Team Trainer (PPTT) project, which is a multi-site organization engaged in the design,production, testing, and delivery of advanced training simulators. The successful candidate will: -Collaborate with multi-disciplinary engineers across multiple locations - Review and dispositionSupplier mechanical design submittals to validate designs based on technical requirements -Interface with stakeholders to ensure project objectives are satisfied - Understand ASME Y14.5Geometric Tolerancing principles Requirements • A DOE L clearance or DOD equivalent is required to be considered for this role., • Bachelor of Science in Mechanical Engineering from an accredited college or university, • Minimum of 3 years of work experience as a Mechanical EngineerDesired Knowledge, Skills, and Abilities, • Experience with SolidWorks or equivalent 3D modeling software, • Experience with Model BasedDesign, • Experience with Design for Manufacturability, • Experience implementing GeometricDimensioning & Tolerancing (GD&T) into designs, • Ability to review, understand, and apply relevant engineering codes and standards (e.g. ASME, AWS), • Experience supporting design reviews and technical interchanges with Suppliers, • Experience with machining and all forms of welding processes across design and production, • Strong communication and collaboration skills -Ability to think creatively and make recommendations to senior project personnel, • Proficiency withMicrosoft Office Products *Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status or any classification protected by applicable state or local law. EEO Employer/Vet/Disabled Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Public Holidays), • Short Term & Long Term Disability

Job DescriptionDescription: ABOUT US At e4health, we Empower Better Health. The e4health Team is on a relentless mission to care for those teams who care for others. We bring our passion, ingenuity, and expertise to every engagement. In joining our Team, we want your help to provide our customers with powerful solutions in the pursuit of quality, integrity, clinical and financial value across healthcare. Our People make the difference. Serving more than 400 hospitals and health systems nationwide for nearly two decades, e4health provides solutions to tackle the toughest problems in healthcare with unmatched technology, mid-revenue cycle, and operational expertise. e4health solutions streamline clinical, financial, and health information data and workflows, optimize coding, quality, and clinical documentation integrity processes, and address health IT operational challenges to deliver material results for healthcare organizations across the country. Learn more about us at . JOB SUMMARY/ESSENTIAL DUTIES AND RESPONSIBILITIES: • Provides routine support and maintenance support to current production, and non-production, applications as assigned, • Identifies, analyzes, and resolves data and system issues of advanced complexity, • Gathers requirements, develops specifications, prepares, and reviews documentation, • Develops, validates, and executes comprehensive test plans, • Communicates effectively, negotiates changes, and assists in prioritization of tasks with client, • May be considered the Subject Matter Expert in their area of application or domain, • Provide knowledge transfer and mentoring to team members as necessary, • Understands and complies with all enterprise and IS departmental information security policies, procedures, and standards, • Works with key project team members to define requirements, design the functional solution, identify and resolve project issues, and ensure the IT solution meets requirements, • Builds positive relationships with business operations, IT&S leadership, and vendors, • Documents requirements defines scope and objectives, and formulates systems to parallel overall business strategies Requirements: REQUIRED QUALIFICATIONS: • Must have a current Radiant Certification, • Must experience with multiple Radiant implementations, • Must know Coding, Charging, Quality, Scheduling. Must know IR, breast, diagnostic, nuclear medicine and PET, • The ideal candidate will have the ability to teach experienced and learning team members, • On Call responsibilities are crucial!, • This candidate must also be able to travel once a month to Houston, TX, • Bachelors in Computer Science, Information Systems, Business, or other Health Care related field or equivalent experience, • Relevant experience of 2-5 years within a healthcare environment, • Relevant Information Systems analyst experience of 3-5 years, • Able to establish and meet delivery dates, • Ability to manage multiple projects and issues adjusting priorities as needed, • Strong analytical and technical skills with ability to analyze issues, assess technical risks, and recommend sound solutions in a timely manner, • Adeptness to learn new assignments, technologies, and applications quickly and manage multiple assignments simultaneously, • Integrity, passion, and ethics are required, • Demonstrates strong collaboration skills, • Has strong analytic and problem-solving abilities and techniques, • Exhibit consistent initiative with strong drive for results and success, • Demonstrate commitment to a team environment?, • Well-developed written, verbal, and presentation communication skills including deep listening and attention to detail, • Ability to self-motivate and self-direct, • Possess strong time management and organizational skills, • High level of integrity & ethical judgement, • Communication, • Consistency and Reliability e4health offers a retirement benefits package including 401(k) with company match. • Full-time employees will be eligible to contribute to a 401(k)-retirement account after successfully completing 90 days of employment. BENEFITS: We offer an excellent salary, medical, dental, vision, life, short/long term disability insurance, and PTO policy. PHYSICAL DEMANDS OF THE ESSENTIAL FUNCTIONS: Sitting, talking, hearing and near vision are required over 90% of the time. Feeling is required over 90% of the time and reaching is required about 50% of the time. The ability to travel to field sites may be required up to 15% of the time. WORKING CONDITIONS WHILE PERFORMING ESSENTIAL FUNCTIONS: Over 90% of the time is spent indoors, with protection from weather conditions. Exposure to noise levels that may be distracting or uncomfortable is present in only unusual situations. PAY RANGE Pay range for this position is $55-85/hr. e4health is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. At our organization, we believe in the principles of pay transparency to foster a fair and equitable workplace for all employees. In alignment with this commitment, we openly communicate salary ranges, bonus structures, and additional financial benefits associated with each position. We believe that transparency in compensation not only promotes trust and accountability but also helps mitigate wage gaps and biases. By providing clear and comprehensive information about compensation in our job descriptions, we aim to create a transparent and inclusive environment where all employees feel valued and respected. Join us in building a culture of fairness and transparency as we strive for excellence together.

Job Description Job Summary Perform all types of work involved in the construction, maintenance, rebuild, removal, operation, testing and inspection of energized or de-energized generation, transmission, and distribution facilities. Respond to emergency call-outs on station trouble and coordinate prompt restoration of service to customers as required. These essential functions are not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below. The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions: ESSENTIAL JOB FUNCTIONS: 1. Assemble, repair and maintain circuit breakers, transformers, reactive devices, switchgear, network protectors and transformers, and station equipment such as lightning arresters and capacitor banks; replace bushings in the field; repair and replace associated equipment and subassemblies; make connection splices and cable terminations; install ground wires on de-energized primary leads and conductors, power cables, ground grid testing, and related apparatus testing. Operate crane and aerial lift equipment Erect and drill switchboard panels and mount equipment; replace switchboard equipment; wire de-energized panels and controls; wire energized panels and controls in the presence of a qualified employee; install and wire outlets, control lighting, fixtures and switches; install conduit, pipe and tubing. Select proper prints and/or drawings for various work and have a basic understanding of each. 2. Make connections for various electrical tests Set up and operate circuit breaker stroke analyzer; set up, tear down and operate oil handling equipment and SF6 gas equipment; record and read instruments and gauges such as voltmeters, watt/reactive meters, ammeters, hydrometers, pressure and level gauges. Check, adjust, and set auxiliary controls such as auxiliary switches, pressure switches, alarm and indicating gauges Use of test equipment: TTR, Doble, core megger and resistance for transformer testing, etc. 3. Maintain records and prepare and submit reports as required., 4. Assist employees of equal or higher classification; direct the work of employees assigned to assist., 5. Perform duties in accordance with the Company safety rules and operating regulations and practices. Assist in conducting departmental safety meetings and training of other employees. Inspect and maintain ladders, and personal insulated safety equipment; use electric or gas welding equipment, hydraulic conduit benders, and compression tools. Maintain tools and equipment in a clean and orderly condition. 6. Perform similar or less skilled work as assigned MINIMUM REQUIREMENTS: Education requirements are listed below: Two-year associate degree electrical/mechanical/industrial maintenance technology or equivalent education and/or experience. Equivalent education and experience is limited to military training and work experience of technical/technician nature (such as aviation and nuclear instrumentation technician);or recent experience (within last 6 months) as a Station Electrician or equivalent job title with another electric utility or contractor. Licenses/Certifications: Valid Class A CDL is not required OTHER REQUIREMENTS: Must be available to work overtime. Travel requirements are expected 70-100% of the time Preemployment testing/screening Equivalent experience is determined at the time of the assessment and appropriate time step credit will be given. Shall qualify through demonstration, examination and/or performance appraisal as determined by the Company. Thorough knowledge of the stations in the territory assigned. Knowledge of print reading sufficient to interpret and apply information from drawings, instruction manuals, one-line diagrams, and associated documents. Must satisfactorily complete, in such time frames as may be established by the Company, all required training to advance to the next higher classification in the line of progression, or vacate the current classification. Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. Ability to deal with customers and other employees in a courteous and professional manner. Ability to plan work and to properly instruct and brief others. Must possess and maintain a valid driver's license. Must meet all vehicle operation requirements as designated by federal and/or state law. Familiarity with the Company safety rules and practices and proficiency in the application of resuscitation and First Aid as presented in the Company's Safety Manual. Considerable travel and overtime may be required to complete work assignments. PHYSICAL DEMANDS: The Physical Demand Level for this job is: H - Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work.

Job Description Must be a Certified Nuclear Medicine Technologist (CNMT) via NMTCB or hold Nuclear Medicine certification ARRT(N) and have a minimium of 1+ years Nuclear Medicine experience. Applicants who do not meet these qualifications will not be considered. Attention all traveling nuclear med techs!!! An amazing opportunity awaits you in the "KeystoneState". Soliant is seeking a nuclear medtechfor a travelassignmentin historic Pittsburgh, PA!!! Nuclear medtechsare in high demand and our well- known clients are eager to add experienced techsto their teams. Make each day your masterpiece. John Wooden Job Details/Requirements: • Start Date: 2-4 weeks from offer, • A 13weekcontract with possibility of extension, • Must have 2+ years of experience as a Nuc MedTech PET Tech, • Must have activeBLS, ACLS, NMTCB orARRT(N)certifications, • Proficient in operating Siemens and GE equipment, • Direct access to your recruiter at all times!, • Great Weekly pensation Packages, • Housing/Meal Stipends (where applicable), • Great Health, Dental, and Vision Insurance Plans, • 401K Investment Plans Link: I look forward to working with you and helping you find your next assignment!

Job Description Navarro Research and Engineering is recruiting for an Electrical Engineer in West Mifflin, PA. An active DOE L Clearance or DOD equivalent is required in order to be considered for this position. Navarro Research & Engineering is an award-winning federal contractor dedicated to partnering with clients to advance clean energy and deliver effective solutions for complex challenges in the nuclear and environmental fields. Joining Navarro means being a part of an exceptional team committed to quality and safety while also looking for innovative strategies to create value for the client’s success. Headquartered in Oak Ridge, Tennessee, Navarro has active programs in place across the nation for DOE/NNSA, NASA, and the Department of Defense. The Naval Nuclear Laboratory develops advanced naval nuclear propulsion technology for the safety and reliability of our Navy's submarine and aircraft fleet. Our company is looking for an experienced Electrical Engineer to join our team as part of the Propulsion Plant Team Trainer (PPTT) project, which is a multi-site organization engaged in the design, production, testing, and delivery of advanced training simulators. The successful candidate will: - Have experience performing electrical drafting - Collaborate with engineers to create or modify designs and drawings for PPTT equipment - Review Supplier electrical designs for adherence to technical requirements Requirements • An active DOE L Clearance or DOD equivalent is required in order to be considered for this position., • Bachelor of Science in Electrical Engineering from an accredited college or university, • Minimum of 3 years of work experience as an Electrical Engineer Desired Knowledge, Skills, and Abilities • Proficiency in performing electrical engineering drafting, • Knowledge of drafting standards and techniques, • Experience creating or reviewing electrical engineering designs based on approved technical requirements, • Proficiency with engineering software, including SolidWorks, SolidWorks Electrical, and/or AutoCAD, • Proficiency with Programmable Logic Controllers, low voltage electrical distribution, audiovisual, or telecommunications systems, • Strong communication and collaboration skills - Proficiency with Microsoft Office Products Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required. Navarro is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, religion, color, national origin, age, disability, veteran’s status or any classification protected by applicable state or local law. EEO Employer/Vet/Disabled Benefits Benefits include medical, dental, and vision insurance; short- and long-term disability insurance; pension benefits*; 401(k) retirement savings plan with employer match; life and accidental death and dismemberment (AD&D) insurance; vacation/sick/holiday pay*. *Based on eligibility rules

Job DescriptionSalary: Mackin Engineers & Consultants is a leading engineering firm providing civil engineering solutions for infrastructure projects throughout the eastern United States. Mackin specializes in highway engineering, structural engineering design & inspection, traffic engineering, construction inspection and management, planning, landscape architecture, and land development services with three offices located in Pittsburgh, Harrisburg, and West Virginia. With a commitment to excellence and innovation, we strive to deliver high-quality, sustainable solutions that meet our clients needs and exceed their expectations. Job Description: Mackin Engineers & Consultants is seeking a qualified Transportation Construction Inspector Supervisor 2 (TCIS-2) in our Pittsburgh, PA office. The TCIS-2 will be responsible for overseeing roadway and bridge construction inspections, ensuring compliance with contract requirements, plans, specification, and cost estimates. This position requires extensive travel, with up to 75% of time spent on-site at various construction locations. Responsibilities: • Perform thorough roadway and bridge construction inspections including grade elevations, stakeouts, asphalt or concrete work, drainage, signage, traffic control, and excavation., • Supervise construction inspection activities, including assigning tasks, providing guidance, and conducting performance evaluations., • Coordinate construction inspection activities, including assigning tasks, providing guidance, and conducting performance evaluations., • Perform calculations, interpret plans, measure quantities, review quality control plans, and generate reports., • Monitor contract progress and review project documentation to ensure adherence to contract requirements, plans, and specifications., • Observe and conduct tests on aggregates, compaction, specific gravities, and more at plants or construction sites., • Package material samples for shipping and document sampling and testing procedures., • Operate nuclear guage and perform compaction control inspection on projects., • Analyze rock and soil properties, including moisture, density, and elevation., • Interpret construction plans, drawings, and technical documents to ensure accurate implementation of project requirements., • Communicate effectively with project stakeholders, including contractors, engineers, and government officials., • Document and report construction activities, progress, and issues encountered during inspections. Enforce safety regulations and procedures on construction sites to maintain a safe working environment., • Ensure compliance with safety regulations and procedures on construction sites., • Assist in resolving construction-related disputes and issues as they arise., • Provide technical expertise and guidance to construction inspection team members. Qualifications: • Minium of 1 year of experience in transportation construction inspection supervisory role or related field. Must have PennDOT Concrete Technician Certification and NECEPT Field Technician Certification., • High school diploma required, Associates or Bachelors degree in civil engineering or related field preferred, but not required., • Proficiency in reading and interpreting construction plans, specifications, and technical documents., • Excellent leadership and communication skills, with the ability to effectively coordinate construction inspection activities and communicate with project stakeholders., • Knowledge of Deltek Ajera, Microsoft Office (Word, Excel, and Outlook), and familiarity using Computers, Printers, and Electronics., • Ability to travel extensively, with up to 75% of time spent on-site at construction locations., • Valid drivers license and reliable transportation., • Relevant certifications (e.g. EIT/FE, PE, NICET Highway Construction, NECEPT, PennDOT Concrete/ACI, CDS NextGen, KAHUA, SSPC-C3, NACE Coating Inspector (Levels 1, 2, or 3), NASSCO (PACP, MACP, LACP, OR ITCP), Nuclear Densometer (Nuke Gage). Benefits at Mackin: • Comprehensive benefits package includes:, • Medical, dental, and vision insurance, • Accident Insurance, Hospital Confinement, and Critical Illness, • Voluntary Term Life Insurance, Short-Term & Long-Term Disability, • Legal Plan and ID Theft Protection, • Pet Insurance, • Group Life/AD&D, • CollegeAmerica 529 Savings Plan, • Profit Sharing and 401(k) company match, • Tuition and certification reimbursement, • Generous Paid Time Off and 8 paid holidays Equal Opportunity Employer Statement: Mackin Engineers & Consultants is an equal opportunity employer and is committed to providing equal employment opportunities to all individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age disability, or veteran status. We value diversity and inclusion and strive to create a work environment that is welcoming and inclusive for all employees. All qualified applicants will receive consideration for employment without regard to their protected status.

Job Description JGMS Government Services is seeking a Manufacturing Engineer (Manufacturability) Please continue to the JGMS Career page to apply for this position: Location: West Mifflin, PA Status: Exempt / Full-Time / On-site Salary Range: $85,000 to $105,000 depending on qualifications Scope: The Naval Nuclear Laboratory develops advanced naval nuclear propulsion technology for the safety and reliability of our Navy's submarine and aircraft fleet. Our company is looking for an experienced Mechanical Engineer to join our Manufacturability team as part of the Propulsion Plant Team Trainer (PPTT) project, which is a multi-site organization engaged in the design, production, testing, and delivery of advanced training simulators. The successful candidate will: • Collaborate with multi-disciplinary engineers across multiple locations., • Review and disposition supplier mechanical design submittals to validate designs based on technical requirements., • Interface with stakeholders to ensure project objectives are satisfied. Bachelor of Science in Mechanical Engineering and a minimum of 3 years of relevant work experience. Preferred Qualifications: • Experience with SolidWorks or equivalent 3D modeling software., • Experience with Model Based Design (MBD)., • Experience with Design for Manufacturability., • Experience implementing Geometric Dimensioning & Tolerancing (GD&T) into designs., • Ability to review, understand, and apply relevant engineering codes and standards (e.g. ASME, AWS)., • Experience supporting design reviews and technical interchanges with suppliers., • Experience with machining and all forms of welding processes across design and production., • Strong communication and collaboration skills -Ability to think creatively and make recommendations to senior project personnel., • Proficiency with Microsoft Office Products. Security Clearance: A current active DOE L Security Clearance is required. Background Check and Screenings A pre-employment drug screening and background review that includes checks of personal references, credit, law enforcement records, and employment/education verification is required. Benefits We take pride in promoting a healthy work-life balance, family-friendly benefits, servant leadership, team values and professional growth. Our competitive benefits package includes: • Medical Insurance - 100% company paid premiums for employees., • Dental and Vision Insurance., • 401k plan with company match., • Paid time off 24 hours of paid community service a year!, • Up to 4 weeks paid time off a year., • 10 paid floating holidays., • Life insurance, short- and long-term disability., • Employee Assistance Program (EAP)., • Professional development opportunities. JGMS Family of Companies Ethically minded, mission driven. We provide applied technology, engineering, science, and management services to government and private sector clients nationwide. As a diverse team of professionals, we are focused on meeting the needs of our clients and following through with real solutions that effectively and efficiently meet all budgetary and scheduling requirements. As a member of the team, you will be involved in a growing, dynamic organization that is developing new client solutions to benefit our environment and economy. Equal Opportunity Employer JGMS Government Services LLC (JGMS-GS) is dedicated to the principles of equal employment opportunity (EEO) in any term, condition, or privilege of employment. The Company prohibits unlawful discrimination against applicants or employees on the basis of age (40 and over), race, color, religion, national origin, disability, genetic information, sexual identity, sexual orientation, pregnancy, veteran status, marital status, or any other status protected by federal, state or local laws. This policy applies to all applicants, employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, or any other entity in professional contact with the Company. Due to the nature of the government contract requirements and/or clearance requirements, US citizenship may be required. If you are an individual with a disability and need assistance completing the online application, please call (970) 254-1354. Alternatively, an email may be sent to with the subject line 'Applicant Accommodation' in the email. Company DescriptionJGMS Family of Companies Ethically minded, mission driven. We provide applied technology, engineering, science, and management services to government and private sector clients nationwide. As a diverse team of professionals, we are focused on meeting the needs of our clients and following through with real solutions that effectively and efficiently meet all budgetary and scheduling requirements. As a member of the team, you will be involved in a growing, dynamic organization that is developing new client solutions to benefit our environment and economy. Equal Opportunity Employer JGMS Government Services LLC (JGMS-GS) is dedicated to the principles of equal employment opportunity (EEO) in any term, condition, or privilege of employment. The Company prohibits unlawful discrimination against applicants or employees on the basis of age (40 and over), race, color, religion, national origin, disability, genetic information, sexual identity, sexual orientation, pregnancy, veteran status, marital status, or any other status protected by federal, state or local laws. This policy applies to all applicants, employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, or any other entity in professional contact with the Company. Due to the nature of the government contract requirements and/or clearance requirements, US citizenship may be required. If you are an individual with a disability and need assistance completing the online application, please call (970) 254-1354. Alternatively, an email may be sent to with the subject line 'Applicant Accommodation' in the email.JGMS Family of Companies\r\n\r\nEthically minded, mission driven.\r\n\r\nWe provide applied technology, engineering, science, and management services to government and private sector clients nationwide. As a diverse team of professionals, we are focused on meeting the needs of our clients and following through with real solutions that effectively and efficiently meet all budgetary and scheduling requirements. As a member of the team, you will be involved in a growing, dynamic organization that is developing new client solutions to benefit our environment and economy.\r\n\r\nEqual Opportunity Employer\r\n\r\nJGMS Government Services LLC (JGMS-GS) is dedicated to the principles of equal employment opportunity (EEO) in any term, condition, or privilege of employment. The Company prohibits unlawful discrimination against applicants or employees on the basis of age (40 and over), race, color, religion, national origin, disability, genetic information, sexual identity, sexual orientation, pregnancy, veteran status, marital status, or any other status protected by federal, state or local laws. This policy applies to all applicants, employees, including managers, supervisors, co-workers, and non-employees such as customers, clients, vendors, consultants, or any other entity in professional contact with the Company.\r\n\r\nDue to the nature of the government contract requirements and/or clearance requirements, US citizenship may be required.\r\n\r\nIf you are an individual with a disability and need assistance completing the online application, please call (970) 254-1354. Alternatively, an email may be sent to with the subject line 'Applicant Accommodation' in the email.

Job DescriptionPosition: CNC Machinist Location: East Pittsburgh, PA; Holtec Manufacturing Division Holtec International seeks qualified applicants for the position of CNC Machinist at its manufacturing and production facilities in East Pittsburgh, PA. The CNC Machinist will be responsible for setting up and operating CNC machines to produce high-precision components. This role requires expertise in machining processes, blueprint interpretation, and quality control to ensure that all parts meet stringent specifications and tolerances. The CNC Machinist will collaborate with production teams, engineers, and quality control specialists to optimize machining operations and maintain the highest levels of efficiency and accuracy. Minimum required qualifications include High School Diploma or equivalent required. A 2-Year Technical Degree or completion of a relevant apprenticeship program required. Equivalent experience and on-the-job training may be considered in lieu of formal apprenticeship. 3-5 years of professional CNC machining experience required. Experience with CNC machinery and programming required. Ability to read and interpret technical drawings, blueprints, and schematics. Proficiency in using precision measuring tools and inspection equipment. Calculate dimensions and tolerances using mathematical principles. Additional desirable qualifications include experience with Fanuc, Siemens 840D, and HAAS controls preferred. Strong understanding of different metal types and machining characteristics. Ability to perform basic preventative maintenance on machines and tools. Troubleshoot and perform minor repairs on CNC machinery, including Haas, FPT, VBM, and Toshiba. Perform first-article inspections and make necessary adjustments before full production runs. Specific Areas of Responsibility: Accurately read and interpret CNC programs, blueprints, and work instructions. Set up and operate CNC Mills and Lathes using provided programs, fixtures, and tool lists. Adjust machine settings to ensure optimal performance and quality output. Load raw materials and verify proper alignment before machining. Conduct machine warm-ups and complete all safety checks prior to operation. Perform in-process inspections to verify that parts meet specifications and tolerances. Use precision measuring instruments such as micrometers, calipers, and bore gauges to inspect close tolerances and surface finishes. Document inspection results and report any deviations or defects. Ensure that finished parts conform to engineering drawings and quality standards. Identify and resolve programming errors, machine malfunctions, and tooling-related issues. Modify machine settings and optimize programs for efficiency and productivity. Continuously monitor operations and make real-time adjustments as needed. Apply knowledge of Geometric Dimensioning and Tolerancing (GD&T) to ensure accuracy in machining. Manage tools, assess tool life and wear, and utilize specialized tooling as required. Review daily job assignments and production schedules. Maintain accurate records of production output, scrap, and rework data. Ensure tools and equipment are properly calibrated and stored at the end of each shift. Participate in team meetings and provide feedback on process improvements. Report any mechanical issues or potential failures to the supervisor immediately. Follow all safety protocols to maintain a secure working environment. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Powered by JazzHR 7jzE3thX8n

Essential Job Functions/Responsibilities: \n • Manufacturing firm is searching for a qualified candidate to perform NDE on ASME Section III, Section VIII Vessels and nuclear power plant components. Experience in working with the following codes/standards: ASME, AWS, ISO and other standards are desired. Job requires potential overnight travel and will require off shift work.\n, • Adherence to safety procedures/guidelines at all times.\n, • Maintain safety precautions at all times.\n, • Keep work area in a clean and orderly condition.\n, • Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results.\n, • Perform Radiographic (RT) Examinations\n, • Familiar with the tools and equipment and shall have demonstrated proficiency in their use.\n, • Capable of determining the calibration status of RT equipment is in proper condition for use, and that inspection, examination and test procedures are approved.\n, • Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart including shades of gray.\n, • Inspection personnel performing work on elevated surfaces shall be capable of wearing the required fall protection equipment.\n, • Inspection personnel shall be physically capable of crawling in and out of small manways, climb inside vessels, towers, heaters, or other confined spaces for inspection activities, often wearing Self Contained Breathing Apparatus (SCBA) as required to comply with safety regulations. Any fear of closeness (claustrophobia) should be identified.\n, • Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds\n, • Will work in various areas of the plant location. Dependent upon the area, environmental conditions can be hot, cold, dirty, greasy, wet and noisy.\n, • May work alone with minimal supervision or with other personnel.\n, • Inspection personnel shall possess fundamental written and verbal communication skills.\n, • Inspection personnel shall be fluent (written and verbal) in the English language.\n, • Computer skills, especially familiarity with MS Office applications, are necessary.\n, • Required: High School diploma or equivalent with at least 3 years of inspection related experience.\n, • Preferred: 2 years of inspection related experience with a completion of 2 years of college in technical or engineering related discipline from a university, college, or technical school.\n, • Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized:, • Radiographic (RT)\n\n, • Preferred candidate to have previous shooters card along with Safety Training associated with Radiography.\n, • Preferred candidate will be a Certified Level II Digital Radiography (DR)\n, • Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT:\n, • Visual Examination (VT),\n, • Liquid Penetrant Examination (PT)\n, • Magnetic Particle Examination (MT)\n, • Valid Driver's License\n, • Previous Level II Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience\n

Job Description HURRY! $500 SIGN-ON BONUS* $$$ for all new hires! We offer a starting salary of $19.00/hr. with NO experience and are serious about starting a new career! Already a seasoned technician? Rates will commensurate with experience. WHO IS HILLIS-CARNES? Hillis-Carnes Engineering Associates (HCEA) is a top-tier, multi-disciplined engineering firm with 30 years of demonstrated success (and counting!) Just ask Engineering News-Record who named us to its ranking of "Top 500 Design Firms in the Nation" for our continued rapid growth and success. HCEA strongly believes in fostering teamwork, rewarding ambition, and providing opportunities for professional advancement. WHY HILLIS-CARNES? Through our ESOP (Employee Stock Option Program), you receive ownership stock in the company! • $500 SIGN-ON BONUS* $$$ for all new hires!, • An additional bonus after one year of service!, • Competitive pay., • Paid on-the-job training., • Generous Paid Time Off/Holidays/Floater Holidays., • Paid education expenses for associated certifications., • Company cell or reimbursement for use of personal phone, • Employee Self-Service Portal, • Employee Referral Bonus program up to $5,000, • Free HCEA apparel and work boots, • Personal Protective Equipment and safety gear, • Paid mileage, • Medical (w/Health Savings Account Options) Plans, • Dental and Vision Plans, • 100% Employer-Paid Benefits (Long-Term Disability, Basic Life), • Voluntary Short-Term Disability, • Voluntary Life, • Employee Assistance Program, • 401k w/ Company Match As a Construction Materials Testing Technician in the Pittsburgh, PA office, you will directly play an integral role in the success of our organization. As part of this team, you will work independently and in collaboration with our knowledgeable, dynamic staff and on a wide variety of land development and construction projects. The key responsibilities will include: • Field observations at jobsites in the region., • Sampling and testing of construction materials., • Preparing accurate daily logs that outline your inspections and results of the test you performed on construction materials. The construction materials you will be working with include soil, aggregates, concrete, grout, masonry, asphalt, and structural steel., • Reliable vehicle for field work, valid driver's license, and satisfactory driving record., • Must meet additional pre-employment criteria., • Ability to lift and/or move up to 60-80 pounds (soil and concrete samples, nuclear gauges, other equipment), • Ability to work in all outdoor climates and mobility over various terrain., • Attention to detail and quality, while adhering to all safety requirements., • Effective verbal and written communication skills required., • Use of company provided tablet and working knowledge of MS Office programs., • Ability to perform basic math and use measurement tools. EE/Minorities and Women encouraged to apply. *$300 sign-on bonus after 90 days: additional $200 retention bonus after one year. Job Posted by ApplicantPro

Job DescriptionPosition: Laborer Place of Work: East Pittsburgh, PA; Manufacturing Division Holtec International seeks qualified applicants for the position of Laborer to assist in the production of Holtec products. This role involves handling and processing materials using manual labor, cranes, forklifts, and other material handling equipment. Responsibilities include material distribution, cleaning, general labor tasks, and performing simple machine setups and operations. Additionally, a Laborer prepares parts for welding and fabrication as needed. Specific areas of responsibility include receiving verbal or written instruction from the supervisor, as well as work orders and/or other documents regarding daily assignments. Executing key manufacturing activities, including moving materials in and out of machines or workstations using various handling equipment, utilizing measurement tools to check part dimensions and ensure adherence to required tolerances and finishes required. Using hand and power tools such as grinders and wire brushes for cleaning parts and assemblies. Other duties include cleaning, painting, and lubricating machines and equipment, loading and unloading trucks, accurately completing documentation to record daily time and production, maintaining a clean and safe work environment, and adhering to all safety protocols, including the use of required personal protective equipment (PPE) such as helmets, hearing protections, safety glasses, gloves, and safety-toed shoes. Minimum required qualifications include a High School Diploma or equivalent and at least 1-2 years of experience in a general labor or manufacturing support role. Additional desirable qualifications include previous experience in a metal manufacturing environment and familiarity with material handling equipment and machine operation. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Powered by JazzHR WR1MuZPOtq

Host Healthcare is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Posted job title: Nuclear Medicine Technologist - Allied. With access to tens of thousands of travel nursing, therapy, and allied jobs in all 50 states, our responsive and friendly recruit

Medical Solutions Allied is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel We’re seeking talented healthcare professionals whose adventure game is as strong as their clinical game. Those that want flexibility and high pay, we have the positions for you! Some of the industry-leading benefits enjoyed by Medical Solutions travel nurses and travel allied healthcare professionals include: • Day One Medical, Dental, and Vision with low premiums, • Day One 401(k) with Company Contribution, • Personalized Compensation Packages, • Paid, Private, Fully Furnished, Pet-Friendly Housing, • Dedicated Recruiter and 24/7 Customer Care Line, • Per Diem Allowance and Paid Travel, • Licensure and Certification Reimbursement, • Free Liability Coverage, • Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident, and Pet Insurance, • Equal Employment Opportunity Medical Solutions Allied Job ID #884198. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Nuclear Medicine At Medical Solutions, we’re people who care, helping people who care. No matter how you look at it, there’s a whole lot of care going on in our world and that’s just the way we like it. What do we do? Medical Solutions is one of the nation’s largest providers of total workforce solutions in the healthcare industry, connecting nurses and allied health clinicians with hospitals and healthcare systems across the country and around the corner. Through our family of brands, we also serve a segment of clients outside of the healthcare space. And we’re the very best at what we do. You’ll love our culture that’s filled with heart and soul. As a company and employer, we’re sincerely and unabashedly us. We lead as humans first and believe the unique qualities of each team member make us better together. We share a purpose for helping others and the drive to make a difference. And we offer endless opportunities for personal and professional growth, throughout your career. At Medical Solutions, you’ll find a great place to work and a career home. We’ve received Best Places to Work awards, landed top industry awards, and received accolades for the impact we’ve made in business and within our community. But the only way to really get to know us, is to join us. We think you’ll fit right in. • Discount program, • Life insurance, • Mileage reimbursement, • Company provided housing options, • License and certification reimbursement, • Benefits start day 1, • Continuing Education, • Guaranteed Hours, • Vision benefits, • Referral bonus, • 401k retirement plan, • Dental benefits, • Cancelation protection, • Weekly pay, • Medical benefits, • Employee assistance programs, • Wellness and fitness programs, • Pet insurance, • Holiday Pay

Fusion Medical Staffing-Radiology is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. • Specialty: Nuclear Medicine Technologist, • Discipline: Allied Health Professional, • Start Date: 09/22/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, • Employment Type: Travel Company: Fusion Medical Staffing Location: Facility in Pittsburgh, Pennsylvania Job Details Fusion Medical Staffing is seeking a skilled Nuclear Medicine Tech for a 13-week travel assignment in Pittsburgh, Pennsylvania. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year's experience as a Nuclear Medicine Tech, • Current Nuclear Medicine Technologist/Radiography license in compliance with state regulations, • Current BLS Certification (AHA/ARC)Preferred Qualifications:, • Current ARRT or Certified Nuclear Medicine Technologist (CNMT), • Educates patients about nuclear medicine procedures and addresses questions if they arise, • Maintains and inspects nuclear medicine equipment for proper functioning, reporting any malfunctions and ensuring compliance with radiation safety standards, • Prepares and administers radiopharmaceuticals and other medications to patients according to established protocols and safety standards, • Monitors patients for adverse reactions to radioactive drugs or other administered medications, intervening as necessary to ensure their safety, • Operates medical imaging equipment to create images of organs or areas of the body according to physician orders, • Documents procedure details in patient records to ensure continuity of care and compliance with regulations, • Follows hospital safety rules and policies and radiation safety procedures to minimize exposure to radioactive materials, • Performs other duties as assigned within the scope of Nuclear Medicine Technologist practiceRequired Essential Skills:, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicateBenefits Include:, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support Start your rewarding career as a Travel Nuclear Medicine Tech with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer Fusion Medical Staffing - Radiology Job ID #1722753. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. With a mission to improve the lives of everyone we touch, Fusion Medical Staffing connects healthcare travelers to opportunities in the locations they've always dreamed of living. Our recruiters act as your co-pilots to support you in your next step – no matter what, where and when. This traveler-first mentality ensures you're in charge of your own destiny, but with the tools you need to succeed. Regardless if you’re a first-time traveler or an established road warrior, you get to choose the best position that not only fits your unique personality but also your personal and professional needs. As a medical traveler, you’ll get to meld your career with personal life experiences, make informed decisions and the freedom to control your career. Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Not to mention you get to explore new cities, take adventures, meet new people, and create memories that last a lifetime. We are not just a place to find your next opportunity, but where you'll love to work. We've won awards for our ethical business practices, lasting community impact, and commitment to being an incredible place to work. • Benefits start day 1, • Medical benefits, • Dental benefits, • Vision benefits, • Referral bonus, • Mileage reimbursement, • License and certification reimbursement, • Weekly pay, • Cancelation protection, • Guaranteed Hours, • Employee assistance programs, • Continuing Education

Health Carousel - Travel Allied is seeking a travel Nuclear Medicine Technologist for a travel job in Pittsburgh, Pennsylvania. Health Carousel - Travel Allied Job ID #JO03893268. About Health Carousel - Travel Allied.

This independent community hospital is seeking a noninvasive cardiologist to join an existing hospital-employed practice of four physicians and two physician assistants for succession planning and growth. The practice site is about one mile from the hospital with plans to move onto the hospital campus. • Access to stress test, ECG, echo and nuclear reading panels, • TEE and Cardioversion also available Must be BC/BE; H-1B can be accepted (cap-exempt); J-1 not possible at this time. One in four on call (not in-house). Benefits include: • Malpractice Insurance, • CME Allowance, • Health Insurance including HSA, • Relocation Allowance, • Educational Loan Reimbursement, • Sign-on Bonus

JOB DESCRIPTION:Medical center in Pennsylvania is seeking a dermatologist to join an established practice. Highly competitive compensation along with top-tier benefits and sign on bonus. A new physician will have the opportunity to practice with an open scope includes general, medical, and cosmetic dermatology. No hospital call. HOSPITAL:This independent acute care community hospital is the sole community provider in the area and nearly every specialty of medicine and surgery is represented by the active medical staff. Services include advanced imaging with PET/CT, MRI, 64-slice CT, nuclear medicine, and cardiac catheterization lab doing PCI without open heart backup. Other specialty services include a Wound Care Center, Women's Diagnostic Imaging Center, inpatient geriatric psychiatry unit, inpatient acute rehabilitation unit, outpatient Human Motion Institute, comprehensive sleep disorders lab, advanced neurodiagnostics lab, community dialysis center, weight management and bariatric surgery program, and an intensivist program. COMMUNITY:Located in the foothills of the Allegheny Mountains, nestled like a shimmering gemstone in the heart of Western Pennsylvania, this is a hometown community that places quality of life and enriching, family first values at its core. If you're looking for a great place to raise children, enjoy beautiful experiences in nature, enhance your cultural depths, cheer on great sports teams, learn through continuing education, and realize what it means to live a good, fulfilling life, this town is the home for you. COME JOIN US! Apply now:For consideration or more information, please EMAIL CV to mailto: Telephone is tel: .PLEASE REFERENCE JOB ID: 1264-DCAF