Trabajos quality inspector en Dallas, TexasCrear alertas

Job DescriptionDescription: Focus/Objective The Extrusion Operator Assistant supports plant operations by assisting in machine set-ups, helping maintain production standards, and ensuring safe and efficient workflows. Job Duties and Responsibilities: • Adjust, calibrate, and test equipment at the beginning of every shift to ensure proper pressure, speed, temperature and general operation., • Examine visually, weigh and measure components created from equipment at the end of the week to ensure machines are produced according to company and industry regulations and standards, adjusting as needed., • Work with team members, shift supervisors and all necessary personnel to take care of complications as they arise, • Communicate with fellow team members to learn of any equipment problems or malfunctions and take care of them as they come up., • Use regulated cleaning solutions, grease guns, oil cans, air hoses and cleaning cloths to properly maintain and clean equipment on a bimonthly basis., • Make repairs to equipment when necessary, and replace all defective, broken or worn-out components., • Choose and install cutters, molds, and all other necessary equipment parts so machines are always operating at peak efficiency. Minimum Position Qualifications/Requirements: • Strong organizational, interpersonal, problem-solving skills and team player., • Detail oriented and commitment to follow through to completion., • Ability to work in a fast-paced environment., • Prolonged periods of standing, bending, and walking from one end of the building to the other., • Manufacturing experience preferred, • Integrity – Supports Governance and Compliance programs and company code of conduct. Maintains confidentiality; inspires respect and trust; does the right thing; reports potentially unsafe conditions; takes responsibility for own actions., • Teamwork – Works well in group situations; supports everyone’s efforts to succeed; contributes to building a positive team environment; shares expertise with others; is consistently on time at work., • Communication – Balances listening and talking; speaks and writes clearly and accurately, influences others; communicates changes and progress; participates in meetings., • Respect for the individual – Shows respect and sensitivity for cultural differences; educates others on the value of diversity; focuses on solving conflict, not blaming., • Data & process-driven decision making – Applies design principles; quality problem solving; develops alternate solutions; develops realistic action plans; develops strategies to achieve organizational goals., • Urgency without frenzy – Generates creative solutions; manages competing demands or unexpected events; adapts strategy to changing conditions; prioritizes and plans work activities; sets goals and objectives., • Accountability – Takes ownership of work; does what is needed without being asked; follows through., • Takes responsibility for own actions; ensures work responsibility is covered when absent; observes safety and security procedures., • Continuous Improvement – Thinks of better ways to do things; understands the organization’s strengths and weaknesses; adapts to changes in work environment; ability to assess own strength and needs; strives to continuously build knowledge and skills.Requirements: Preferred Skills/Qualifications & Education: • 12 to 24 months of experience as an Extrusion Machine Operator Assistant or related experience, • Successfully completed all requirements from the respective Extrusion Operator Check sheet, • Able to work in a fast-paced manufacturing environment, • Experience or ability in mentoring and training, • Self-directed and independent with strong communication skills Education and Experience: • High School Diploma or GED required. Environmental, Health & Safety Responsibilities: • Exemplify EE Dallas QB Inc.’s safety culture in everyday activities., • Gain a thorough working knowledge of EE Dallas QB Inc. Environmental, Safety & Health (ESH) policies and procedures., • Follow all EE Dallas QB Inc. facility and corporate ES&H procedures and practices., • Attend and actively participate in facility ESH meetings and forums that will drive employee involvement., • Participate in JSA’s, and other site safety reviews., • Complete all required ESHA training in a timely fashion., • Ensure equipment used in the extrusion process is operated properly and all safety mechanisms and guards are in place., • Understands how to handle machines properly during an emergency, which includes power outages, machine failure, workplace injuries, etc., • Follows plant safety procedures and guidelines; informs supervisor of safety issues; reports any workplace injury or incident immediately; wears and utilizes personal protective equipment (PPE) as required., • Mentors other machine operators and inspector-packers on safety procedures and guidelines., • Understands and performs Lock-out/Tag-out procedures and how to mentor this topic to other employees. Quality Responsibilities: • Responsible for ensuring regulations and company quality procedures are followed in the performance of your job, • Responsible for maintaining good housekeeping in your work areas., • Responsible for maintaining all Quality documents assigned to your job are properly completed following our GMP & BRC standards., • Responsible completing all Quality training to maintain the ability to do your job following our SOPs., • Responsible for actively participating in GEMBA walks when called upon to do so., • Ensures that all products manufactured on assigned machines are within Company quality limits; immediately recognizes quality issues and acts; operates at or below Company scrap targets, • Ensures grinder is functioning properly, • Assists with in-line inspection when necessary; completes any re-inspection that is ordered due to quality issues from assigned line Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: • Employees may be required to sit, stand, walk, reach with hands and arms, balance, stoop, kneel, crouch, or crawl., • Specific vision abilities required by this job may include close vision., • Must be physically capable of spending long hours outdoors or in a warehouse environment., • Ability to perform general to advanced machine maintenance, • Must be “fit for duty”., • I must be able to lift to 80 pounds at a time., • Able to walk a minimum of 5,000 steps per day. Talking is important for those activities in which workers must impart oral information to clients or to the public, and in those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Using primarily just the fingers to make small movements such as typing, picking up small objects, or pinching fingers together. While performing the duties of this job, the employee is regularly required to sit; use hands; reach with hands and arms and talk or hear. The employee is frequently required to stand; walk and stoop; kneel, crouch or crawl. Work Environment: Must be able to perform under the following conditions: • Work primarily production area without climate control, • Always Work safely., • Work occasionally in the warehouse, plant building, or outside plant area., • Able to occasionally work long hours without prior notice to assist the plant on urgent issues.

Job DescriptionDescription: Focus/Objective The Thermoforming Operator supports daily plant operations by safely and efficiently operating thermoforming equipment, mentoring fellow operators, and ensuring production, quality, and safety standards are consistently met. Job Duties and Responsibilities: • Operate one or two thermoforming machines under minimal supervision., • Adjust machine components to regulate speeds, pressures, and temperatures, dimensions, and material flow., • Monitors machine performance responds to alarms and malfunctions and perform advance troubleshooting., • Conduct machine adjustments (air pressure, vacuum, coolant flow, synchronization, etc.) to ensure proper operation., • Load raw materials, remove finished products, and deliver pallets to designated areas., • Achieve daily production output goals within established deadlines., • Enter daily utilization data into plant PCM and complete required paperwork (logs, condition sheets, checklists, locator cards)., • Perform and/or assist with preventive maintenance, cleaning, and machine adjustments., • Mentor and support new operators during onboarding; provide direction to inspector-packers as needed., • Notify supervisor immediately of any processing or maintenance issues., • Support continuous improvement efforts and assist with special projects as assigned. Minimum Position Qualifications/Requirements: • Strong organizational and problem-solving skills, • Detail oriented and commitment to follow through to completion., • Strong interpersonal skills; Strong team player, • Ability to work in a fast-paced environment., • Minimum 3-years forklift experience., • Prolonged periods sitting on a forklift., • Prolonged periods of standing, bending, and walking from one end of the building to the other., • Manufacturing experience preferred, • Integrity – Supports Governance and Compliance programs and company code of conduct. Maintains confidentiality; inspires respect and trust; does the right thing; reports potentially unsafe conditions; takes responsibility for own actions., • Teamwork – Works well in group situations; supports everyone’s efforts to succeed; contributes to building a positive team environment; shares expertise with others; is consistently on time at work..., • Communication – Balances listening and talking; speaks and writes clearly and accurately, influences others; communicates changes and progress; participates in meetings., • Respect for the individual – Shows respect and sensitivity for cultural differences; educates others on the value of diversity; focuses on solving conflict, not blaming., • Data & process-driven decision making – Applies design principles; quality problem solving; develops alternate solutions; develops realistic action plans; develops strategies to achieve organizational goals., • Urgency without frenzy – Generates creative solutions; manages competing demands or unexpected events; adapts strategy to changing conditions; prioritizes and plans work activities; sets goals and objectives., • Accountability – Takes ownership of work; does what is needed without being asked; follows through., • Takes responsibility for own actions; ensures work responsibility is covered when absent; observes safety and security procedures., • Continuous Improvement – Thinks of better ways to do things; understands the organization’s strengths and weaknesses; adapts to changes in work environment; ability to assess own strength and needs; strives to continuously build knowledge and skills. Preferred Skills/Qualifications & Education: • HS Diploma/GED, • 12 to 24 months of experience as a Forming Machine Operator or related experience, • Successfully completed all requirements from the respective Forming Operator Check sheet, • Ability to perform general to advanced machine maintenance, • Able to work in a fast-paced manufacturing environment, • Experience or ability in mentoring and training, • Self-directed and independent with strong communication skills Education and Experience: • High School Diploma required., • Forklift CertificationRequirements: Environmental, Health & Safety Responsibilities: • Exemplify EE Dallas QB Inc.’s safety culture in everyday activities., • Gain a thorough working knowledge of EE Dallas QB Inc. Environmental, Safety & Health (ESH) policies and procedures., • Follow all EE Dallas QB Inc. facility and corporate ES&H procedures and practices., • Attend and actively participate in facility ESH meetings and forums that will drive employee involvement., • Participate in JSA’s, and other site safety reviews., • Complete all required ESHA training in a timely fashion., • Participate in any safety investigations when called upon to do so., • Ensure equipment used in the forming process is operated properly and all safety mechanisms and guards are in place, • Understands how to handle machines properly during an emergency, which includes power outages, machine failure, workplace injuries, etc., • Follows plant safety procedures and guidelines; informs supervisor of safety issues; reports any workplace injury or incident immediately; wears and utilizes personal protective equipment (PPE) as required., • Understands and performs Lock-out/Tag-out procedures and how to mentor this topic to other employees., • Ensures equipment used in forming process is operated properly and all safety mechanisms and guards are in place, • Understands how to handle machine properly during an emergency, which includes power outages, machine failure, workplace injuries, etc., • Follows plant safety procedures and guidelines; informs supervisor of safety issues; reports any workplace injury or incident immediately; wears and utilizes personal protective equipment (PPE) as required, • Mentors other machine operators and inspector-packers on safety procedures and guidelines, • Understands and performs Lock-out/Tag-out procedures and how to mentor this topic to other employees Quality Responsibilities: • Responsible for ensuring regulations and company quality procedures are followed in the performance of your job, • Responsible for maintaining good housekeeping in your work areas., • Responsible for maintaining all Quality documents assigned to your job are properly completed following our GMP & BRC standards., • Responsible completing all Quality training to maintain the ability to do your job following our SOPs., • Responsible for actively participating in GEMBA walks when called upon to do so., • Ensures that all product manufactured on assigned machine is within Company quality limits; immediately recognizes quality issues and takes action; operates at or below Company scrap targets, • Ensures grinder is functioning properly, • Assists with in-line inspection when necessary; completes any re-inspection that is ordered due to quality issues from assigned line, • Follows plant quality practices including Good Manufacturing Practices, or GMP’s, • Ensures grinder is functioning properly Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: • Employee may be required to sit, stand, walk, reach with hands and arms, balance, stoop, kneel, crouch, or crawl., • Specific vision abilities required by this job may include close vision., • Successfully completed all requirements from the respective Forming Operator Check sheet, • Must be physically capable of spending long hours outdoors or in a warehouse environment., • Ability to perform general to advanced machine maintenance, • Must be “fit for duty”., • Must be able to lift up to 60 pounds at a time., • Able to walk a minimum of 5,000 steps per day. Work Environment: • Must be able to perform under the following conditions:, • Work primarily production area without climate control, • Work safely at all times., • Work occasionally in the warehouse, plant building, or outside plant area., • Able to occasionally work long hours without prior notice to assist the plant on urgent issues. Talking is important for those activities in which workers must impart oral information to clients or to the public, and in those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly, or quickly. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Using primarily just the fingers to make small movements such as typing, picking up small objects, or pinching fingers together. While performing the duties of this job, the employee is regularly required to sit; use hands; reach with hands and arms and talk or hear. The employee is frequently required to stand; walk and stoop; kneel, crouch or crawl.

Job Description *Want to interview with the hiring authority? Before applying, please complete our brief Culture Index survey.* This helps us understand how you work best and ensures alignment with the role and our culture. Complete the Culture Index Survey Why The Morgan Group? At The Morgan Group, we are more than our 70+ multifamily properties — we are a community built on people. We believe in treating everyone with respect and dignity, from our team members and partners to our residents, clients, subcontractors, and vendors. We strive to foster an inclusive environment where every idea, perspective, and contribution is valued, and where everyone feels heard and appreciated. Our Core Values are the foundation of our success — they guide how we hire, reward, and evaluate every member of the Morgan team. Morgan Core Values We are Self-Starters • In it to win it, • We take initiative, • Be accountable One Morgan • We are team players, • We are inclusive, • No Drama We Get it Done • We are reliable, • We are effective Raise the Bar • We seek excellence, • We learn from our mistakes, • We strive to improve, • Hold ourselves to high standards Keep on Truckin’ • Embrace challenges & be optimistic, • We are resilient, • Choose positivity, • We are level-headed Reputation is Earned Daily • Do the right thing, • We are honest and have high integrity, • We make good decisions, • Our future depends on it We attract and retain top talent by offering full-time team members a comprehensive range of benefits designed to support their well-being and success: • Advancement opportunities, • Training, • Low-cost Medical, Dental, Vision, • Flexible Spending Accounts (Medical, Limited Purpose & Dependent Care), • Health Savings Account, • Voluntary Life Insurance, • Long-Term Disability Insurance, • Company Paid Life Insurance, • Company Paid Short-Term Disability Insurance, • 401K (Traditional & Roth) with Company Match, • Employee Assistance Program, • Paid Time Off plans including:, • Vacation, • Sick, • Floating Holiday, • Bereavement Leave, • Holiday Schedule, • Referral Bonus Program, • Annual Bonus Program How does Morgan Group benefit you? Joining Morgan Group means more than just a job — it’s a chance to learn, grow, and build a career you’re proud of. From property management and maintenance to construction and development, we provide the tools, training, and team support to help you reach your full potential. Duties and Responsibilities Specific job duties include, but are not limited to, the preparation, review, tracking and distribution of the following documents and tasks: • Request for Information (RFI’s), • Communicate (verbally and written) questions effectively using plans, sketches and photographs as needed, • Works to PE and APM to ensure that RFI’s are tagged on plans in Procore and field set, • Weekly Subcontractor Meeting, • Assist in creating 4- Week look ahead schedule, • Assist in the preparation of the weekly subcontractor meeting (i.e., meeting agenda, as well as prepare and distribute meeting minutes to subcontractors on a weekly basis), • Be prepared to review and discuss any new Plan Changes and RFI responses, • Assist in discussion of weekly safety topic, • Hot topics and Issues, • Plans & Revisions, • Basic understanding and ability to read plans, • Works with PE and APM to maintain a current and permitted set of plans in the jobsite office for the local inspecting municipality, • Check plans and submit RFI’s as needed so that productivity is not hindered, • Ensure RFI’s are being marked and clouded on the drawing sets, both in Procore and field set, • Communicate changes to subcontractors in the field and ensure latest plans are being used in the field., • Safety, • Conduct daily safety walk, • Correct any issues immediately and report to sub’s foreman and superintendent, • Document repeated offenses and email sub’s main office (copy PM) if an issue continues or is not corrected., • Schedules, • Assist Superintendent with updates to the projected and actual schedule prior to the team meeting each week, • Assist Superintendent with creating a 4-week look ahead schedule to distribute at weekly sub meetings, • Punch Lists, • Create and distribute detailed completion lists and punch lists, • Manage the completion of these lists, • Inspections, • Works with Project Engineer to track and review any open items created on inspections, • Work with city inspectors to pass inspections as needed, • Inspect and verify the subcontractor’s layout of items. Examples include:, • Plumbing/electrical in slab rough, • Drywall layout, • Cabinet and appliance layout, • Rough in locations to match “box walk”, • Tile layout, • Follow up on all Third-Party Inspections to make sure all deficiencies are cleared, • Fair Housing, • Water Proofing, • Structural, • Concrete, • Welding, • Safety, • Bank Inspectors, • QAQC, • Any other Inspector, • Budget, • Carefully control labor hours and invoiced expenses, • Review draws and invoices when requested for accuracy and report any issues to Project Manager and Superintendent., • Meetings, • Participate in team and project meetings and prepare meeting minutes (i.e., jobsite, weekly team meetings, QAQC, subcontractor, pre-installation coordination, etc.). Qualifications • Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things., • Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings., • Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information, • Adaptability - Adapts to changes in the work environment; Manages competing demands; Able to deal with frequent change, delays, or unexpected events., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals.; Completes tasks on time or notifies appropriate person with an alternate plan., • Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed, • Excellent organization and Time management skills, • Working experience in construction management preferred, • Basic knowledge of construction management processes, means and methods, • Basic knowledge of building products, construction details and relevant rules, regulations and quality standards, • Basic understanding of facets of the construction process, • Familiarity with MS Word and Construction Management applications (ex: Word, Excel, Outlook, Procore, Textura, Primavera), • Ability to plan and see the “big picture”, • Competent in conflict and crisis management, • Excellent time and project management skills, • BS degree in construction management, architecture, engineering or related field or equivalent experience in construction management., • Has completed or will complete an OSHA 30HR safety certification Working Conditions While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. This position is sometimes performed in the local office and at project site(s) in outside weather conditions. Overtime will be required to meet project deadlines. Physical Requirements The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Have endurance and ability to visit entire job site, including stairs or other elevated structures. Direct Reports Manages the Labor Foremen

Overview: Sun Auto Tire & Service Join a Team That Respects Your Skill and Fuels Your Future! Sun Auto Tire & Service, a nationwide leader in automotive services. From coast to coast, we’re committed to integrity, excellence, and developing our people. As a Senior Automotive Technician, you will play a key role in diagnosing and repairing customer vehicles with accuracy, efficiency, and attention to quality. You’ll utilize your technical expertise to perform advanced diagnostics and repairs while ensuring every vehicle meets MAP guidelines and dealership, manufacturer, and company repair standards. Incredible Pay Awaits: $30.00/Hr. – $45.00/Hr. (flag rate), Depending on your experience and certifications. Benefits: • Closed Sundays, • Competitive Bi-Weekly Pay, • Tuition Reimbursement, • Paid Vacation and Sick Time, • 6 Paid Holidays, • Medical, Dental and Vision Insurance, • Life Insurance (Company paid), • 401(k) Retirement Savings Plan with Company Match, • Discounted Services on Personal and Immediate Family Vehicles, • Opportunity for Advancement!!! Principal Duties and Responsibilities: • Diagnoses vehicles according to the appropriate level of certifications/experience., • Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy, • Performs complex and heavy-duty repairs, • Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers, • Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file, • Follows all safety procedures and reports any concerns to direct supervisor, • Ability to work flexible schedules, including weekends as needed. But never Sundays! Other duties as assigned by direct supervisor, • Adheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee Handbook Qualifications: • Previous automotive technician / mechanic experience required, • ASE certifications in lieu of experience, • Ability to demonstrate proper use of computerized equipment for diagnostics, • Valid Driver’s license, • Must be at least 18 years of age, • Possess State Inspector License or ability to obtain a State Inspector license (in applicable locations) within 30 days of hire date, • High School Diploma or equivalent; Technical School experience preferred Working Conditions and Physical Demands: The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Senior Automotive Technician must be able to meet the following physical requirements: • Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building, • Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently, • Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently., • Communicate with customers and shop personnel, • Vision sufficient to detect color, depth, and re-focus We are committed to providing reasonable accommodations to employees with disabilities upon request Get paid like a pro, treated like a leader, and still enjoy your Sundays. Apply today to start your journey with Sun Auto! Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Position Summary Thompson Engineering is seeking a motivated and detail-oriented Certified Welding Inspector (CWI) to join our inspection and quality assurance team. This position is responsible for performing welding inspections and ensuring compliance with applicable codes, project specifications, and industry standards across a variety of construction and industrial projects throughout the Southeast. This role requires the ability and willingness to travel to project sites, including multi-state assignments, and work in field environments as needed to support active construction operations. Key Responsibilities • Perform visual welding inspections in accordance with applicable codes and project specifications (AWS, ASME, API, etc.) • Verify compliance with approved Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) • Confirm welder qualifications and maintain required documentation, • Interpret construction drawings, welding symbols, and technical specifications, • Document inspection findings, non-conformances, and corrective actions, • Coordinate and monitor non-destructive testing (NDT) activities as required, • Prepare daily field reports, inspection summaries, and supporting documentation, • Travel to various job sites, including out-of-town and multi-state assignments, as required, • Follow established safety policies and quality control procedures, • Communicate effectively with project managers, field staff, contractors, and clients Qualifications • Current Certified Welding Inspector (CWI) certification issued by the American Welding Society (AWS), • High school diploma or equivalent required; associate degree in welding technology or related field preferred • Minimum 3 years of welding inspection experience preferred, • Working knowledge of applicable welding codes such as AWS D1.1, API 1104, and ASME Section IX, • Strong understanding of welding processes and inspection techniques, • Proficiency with Microsoft Office applications and digital reporting systems, • Strong written and verbal communication skills, • Valid driver's license with a clean driving record, • Ability and willingness to travel frequently and work extended hours based on project needs Physical and Work Environment Requirements • Ability to work in outdoor and construction site environments, • Ability to stand for extended periods and navigate uneven terrain, • Ability to lift up to 50 pounds and perform field-related tasks, • Willingness to work flexible hours, including overtime and travel assignments, based on project needs

Job Description Quality Assurance Inspector I - Day Shift (7:00AM - 7:00PM) $20.35/hr. Who we are looking for: We are currently searching for a Quality Control Inspector to be based out of Dallas, TX. Reporting to the Plant Manager, the Quality Control Inspector will be responsible for ensuring that all product received and produced meet the quality specifications established both internally and by outside regulatory agencies. Who we are: Atkore is a leading manufacturer and distributor of electrical, mechanical, and safety infrastructure solutions to power and protect the world. With approximately 3,900 employees and 65 manufacturing and distribution facilities worldwide, Atkore manufactures electrical conduit, cable management systems, armored cable, metal framing, and security products and solutions is a recent recipient of a Great Place to Work© certification. Atkore’s commitment to quality, delivery and value helps customers realize their vision. Atkore forges relationships and shapes the future with breakthrough results, enhanced technology, and innovative product offerings. Atkore, a recent recipient of a Great Place to Work© certification, is currently searching for a Quality Control Inspector to be based out of Dallas, TX. Reporting to the Plant Manager, the Quality Control Inspector will be responsible for ensuring that all product received and produced meet the quality specifications established both internally and by outside regulatory agencies. What you’ll do: • Preform quality control tests as required, • Experience in the plastics industry, • Execute and maintain all necessary paperwork and documentation, • Train all employees, including new hires in the area of quality, • Ensure that all shifts preform quality test and procedures, • Review shift quality control inspection sheets for accuracy, • Ensure all weights for production are recorded accurately What you’ll bring: • Minimum educational requirement is high school diploma, or equivalent, • 5 years of experience in a plastic extrusion operation as a supervisor, lead man, or highly skilled operator, • Experience and knowledge of Lean Daily Management principles preferred, • All associates must embrace and foster and environment that supports our core values of Integrity, Respect, Excellence, Teamwork and Accountability. Within 3 months, you'll: • Complete your Atkore immersion program., • Understand how your job will help deliver Atkore's strategy., • Gain an understanding of the business and team you work with and support. Within 6 months, you'll: • Identify ways to strengthen you and your team's commitment to Atkore's core values of Accountability, Teamwork, Integrity, Respect, and Excellence., • Have a complete understanding of your position and it's importance to daily operation., • Be able to test our products using UL specifications., • Make sure equipment and tools are calibrated. Who we are: Atkore is a six-time recipient of a Great Place to Work© certification and a four-time Top Workplaces USA award! We’re committed to creating an engaged and aligned workforce that drives collaborative culture. Our team strives for breakthrough results, stays focused on being standout leaders, and fully supports decisions of the Company. We consistently live the Atkore mission, strategic priorities, and behaviors, all in a way that’s consistent with our core values. Join our team and align yourself with an industry leader! As of the date of this posting, a good faith estimate of the current pay for this position is $20.35 per hour. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays, • Any leave required under federal, state, or local law Benefits are subject to vesting and eligibility requirements. Applications are being accepted on an ongoing basis.

Job DescriptionOur Core Values: The culture at Prism Health North Texas is built on our shared Core Values. We make hiring, firing, promotion and performance review decisions based on these values and behaviors, so it is important that you also share these Core Values: • We are solution seekers., • We have a can-do attitude., • We are mission driven., • We care about people. General Description: Under the direction of the Chief Legal Officer, the Director of Compliance & Privacy provides leadership and oversight of the organization's compliance and privacy programs. This position is responsible for developing, implementing, and maintaining an effective compliance framework that promotes adherence to applicable federal and state laws, HRSA and grant requirements, HIPAA regulations, and organizational policies. The Director fosters a culture of ethics, accountability, and regulatory excellence while also serving as the organization's HIPAA Privacy Officer.ResponsibilitiesSpecific Responsibilities of the Job: • Lead, develop, and manage the organization’s compliance program in alignment with federal and state regulations, grantor requirements and industry best practices., • Supervise and mentor compliance staff, building a high-performing, collaborative team environment., • Design and oversee internal auditing and monitoring programs, conduct enterprise-wide risk assessments, maintain the annual compliance auditing and monitoring work plan., • Identify vulnerabilities and implement mitigation strategies., • Oversee incident reporting and compliance investigations, ensuring timely resolution and appropriate corrective action., • Oversee and coordinate external audits, reviews, site visits, and inquiries conducted by regulatory agencies, grantors, and other oversight entities, lead ongoing readiness activities to ensure organizational preparedness, and oversee corrective action plans resulting from external audit findings., • Oversee compliance committee activities and present regular updates to leadership and stakeholders., • Develop, implement, and maintain compliance policies, procedures, and standards of conduct., • Design and deliver compliance training and promote awareness of compliance standards, regulatory requirements and ethical behavior across the organization., • Monitor changes in applicable federal, state, local, and grant-related regulatory requirements and evaluate operational impacts to ensure ongoing compliance, including but not limited to Health Resources and Services Administration (HRSA) regulations and requirements, Federally Qualified Health Center (FQHC) program requirements, Ryan White HIV/AIDS Program requirements, 340B Drug Pricing Program compliance requirements, HIPAA Privacy, Security, and Breach Notification Rules, Medicare and Medicaid program requirements, Fraud, waste, and abuse laws and regulations, Office of Inspector General (OIG) compliance guidance, Applicable Texas healthcare regulations and reporting requirements, Clinical documentation, quality, and patient safety standards., • Serve as HIPAA Privacy Officer and collaborate with the designated HIPAA Security Officer and Chief Legal Officer to ensure coordinated oversight of privacy and security compliance activities., • Oversee privacy incident responses and investigations, breach notification and reporting requirements, annual HIPAA risk assessments and mitigation activities., • Performs other duties as assigned.Required SkillsRequired Knowledge, Skills, and Abilities:, • Strong project management and organizational skills with the ability to manage multiple priorities and deadlines., • Excellent written, verbal, and presentation skills., • Ability to interpret and communicate complex regulatory requirements in a clear and practical manner., • Strong interpersonal skills and ability to build collaborative relationships across all organizational levels., • Proficiency with Microsoft Office applications, compliance management systems, incident reporting platforms, and electronic health records (EHRs)., • Ability to analyze data, prepare reports, and monitor compliance metrics and key performance indicators.Required Education and Experience:, • Bachelor's degree in Healthcare Administration, Public Health, Business Administration, Health Information Management, Law, or a related field required., • Minimum of seven (7) years of progressively responsible experience in healthcare compliance, privacy, risk management, auditing, legal/regulatory affairs, or related healthcare operations., • Minimum of three (3) years of leadership or management experience overseeing compliance and/or privacy programs., • Master's degree in Healthcare Administration (MHA), Public Health (MPH), Business Administration (MBA), Juris Doctor (JD), or related field preferred., • Experience in a Federally Qualified Health Center (FQHC), community health center, public health organization, hospital, or healthcare system preferred., • Relevant professional certification preferred, such as Certified in Healthcare Compliance (CHC), Certified Compliance and Ethics Professional (CCEP), Certified in Healthcare Privacy Compliance (CHPC).

Job DescriptionMust be willing to travel/temporarily relocate to Wichita, Kansas. What We Offer: • Paid Travel and lodging assistance available., • Long and Short-Term Contracts., • Immediate placement., • PTO., • Paid Holidays., • Health Benefit. The Inspector - Fabrication/Assembly is responsible for ensuring that all fabricated and assembled components meet the highest standards of quality, safety, and compliance with engineering specifications. Key Responsibilities: • Use and interpret drawings, inspection manuals, and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools, and equipment necessary to accomplish work assignments., • Experience working with Quality Management System Policies and Procedures., • Working knowledge of Company Policies, Procedures, and Specifications., • Overall working knowledge of production processes., • Good communication skills written and verbal., • Good computing skills., • Maintain certifications as required., • Follow inspection (shop) procedures to accept or reject processes/parts/assemblies., • Verify that tools are qualified., • Prepare and maintain Quality records., • Work across equivalent or lower-level Inspector job codes as required. Experience: • 5 years experience in aerospace airframe assembly inspection., • Blueprint reading experience., • MS Office and SAP experience., • Experience writing NCRs (Tags)., • SAP experience., • Previous Spirit or Boeing experience., • Boeing 737 Airframe/Fuselage Experience.

Job DescriptionPosition Summary We are seeking a detail-oriented Quality Inspector to join a growing manufacturing team in Garland, TX. This position plays a key role in ensuring raw materials, in-process components, and finished products meet established quality standards before shipment. The ideal candidate has experience working in a manufacturing environment, understands the quality inspection process, and is comfortable using precision measuring tools. Key Responsibilities • Inspect raw materials, components, and finished products according to quality standards and customer specifications., • Perform accurate measurements using calipers, micrometers, tape measures, and other inspection equipment., • Monitor production and machine operations to verify product quality throughout the manufacturing process., • Complete work orders, inspection reports, and production documentation accurately and on time., • Identify, document, and report quality concerns while working with production personnel to resolve issues., • Maintain a clean, safe, and organized work environment while following all company and OSHA safety standards., • Adhere to all company policies and procedures including PPE requirements Qualifications & Skills, • High school diploma or GED required., • Previous quality inspection or manufacturing experience preferred., • Ability to read and interpret blueprints, work instructions, safety rules, operating procedures, and other technical documents., • Comfortable working with measurements, fractions, decimals, and basic mathematical calculations., • Experience operating forklifts, overhead cranes, or side loaders is preferred., • Strong attention to detail, excellent organizational skills, and commitment to workplace safety., • Ability to lift weight up to 50 pounds throughout the shift.Work Environment, • Manufacturing environment with exposure to moving equipment and production machinery., • Personal Protective Equipment (PPE) is required, including hard hats, safety glasses, and steel-toe safety shoes., • Standing, walking, bending, and lifting throughout the workday are required.Employment Type & Compensation, • This is a Full-Time | Temp-to-Hire position, • Compensation: $18.00 - $21.00 per hour, based on experience, • Application Window: Open until filled Work Schedule, • 1st Shift | Monday-Friday | 7:30am-4:00pm Benefits NCW offers a comprehensive benefits package to eligible employees, including: • Medical, Dental, and Vision Insurance, • 401(k) Retirement Plan, • Paid Holidays, • Paid Time Off, • Bereavement Leave, • Referral Program, • Weekly Pay, • Opportunities for Career Growth Employer Information This position is being recruited by NCW on behalf of a client company. All hiring decisions will be made by the employer. NCW partners with organizations nationwide to connect top talent with opportunities across construction, manufacturing, warehousing & distribution, and engineering industries. Equal Opportunity Employer We are an Equal Opportunity Employer and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration without regard to protected status in accordance with applicable laws.

Job Description INSPECTOR JOB DESCRIPTION Job Responsibilities include but are not limited to: • Sprinkler, • Perform duties in a cost-effective manner while inspecting structures which contain Fire Sprinkler Systems, • Correctly complete all Inspection related documentation, • Develop working knowledge of applicable NFPA and common materials and installation processes. Maintain RME-I license as well as obtain and maintain TCEQ backflow licensing (B-PAT), • Properly perform needed sprinkler system inspections and all associated components including, but not limited to, Wet, Dry, Fire Pumps, Pre-action, Deluge, Antifreeze Loops, backflows, etc., • Cross-train additional licensing duties in order to obtain multiple licenses, • Alarm is a plus, • Develop working knowledge of applicable NFPA standards, • Correctly complete all inspection related documentation, • Perform duties in a cost-effective manner while inspecting structures which contain Fire Alarm Systems, • Properly perform needed alarm system inspections and all associated components, • Cross-train additional licensing duties in order to obtain multiple licenses, • Extinguisher/Hood/Special Hazard, • Develop working knowledge of applicable NFPA standards and manufacturer installation manuals and requirements, • Correctly complete all inspection related documentation, • Perform duties in a cost-effective manner while inspecting structures which contain Fire Extinguishers, Hood Suppression Systems, and/or Special Hazard (dependent upon license held), • Properly perform needed extinguisher/suppression system inspections and all associated components, • Cross-train additional licensing duties in order to obtain multiple licenses, • Super Tech, • Holds all Fire licenses, including, RME-I, FAL, FEL-A, B-PAT (Backflow Preventer), • Lead large inspections and special projects with multiple techs or solo, • Perform duties in a cost-effective manner while inspecting structures which contain multiple facets of fire protection, • Assist and/or fill in for inspection manager as required, • Mentor lower level technicians during their quest for additional licenses and knowledge Expectations: • Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily, • Safety First, • Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc., • Ensure timely and accurate Incident and Accident Reporting, • Hold yourself accountable for all Safety Initiatives, • Hold yourself accountable for Safe Driving of Company Vehicles, • Ensure awareness and support of Stop Work Authority, • Complete all Training Requirements – Safety, Certifications, etc., • Submit accurate Timesheet – job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal, • Ensure all required documents are complete, accurate and professional, with required signatures, • Ensure proper Inventory Management – review, update, and approve packing slips – submitted timely, proper material management, • Ensure proper Maintenance and care of equipment – trucks, lifts, tools, etc., • Keep jobsites clean and organized, • Ensure Production Efficiency – awareness of budget vs. actual labor hours and proactive communication with superintendent, • Support and Ensure Adherence to Company SOPs – Purchase Orders, Change Orders, etc., • Timeliness – at the job on time; attendance; communication with supervisor; paperwork, • Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities, • Maintain Quality Control i.e. reduce the need for return trips and warranty work, • Maintain a Professional appearance, • Communicate effectively and professionally within the department and with internal and external customers, • Teamwork – maintain positive interactions within your team, local office, etc., • Actively Participate in required team meetings, • Ability to work overtime, out of town or on-call as needed Knowledge: • Minimum education of High School Diploma or Equivalent, • Required NICET level for their trade and applicable/current TX Dept of Insurance license, • Strong understanding of materials, tools equipment, and procedures used in the installation process, plus working knowledge of NFPA standards, • Current and clear TX DL and clean driving record as well as applicable criminal background Work Experience: • Sprinkler, • Minimum of 5 years experience (install/service experience is a plus), • Alarm, • Minimum of 3 years experience (install/service experience is a plus), • Extinguisher, • Minimum of 2 years experience, • Hood Suppression, • Minimum of 3 years experience, • Special Hazard, • Minimum of 5 years experience and must have FAL license and work experience Skills and Competencies: • Ability to take direction from upper management, • Accurately complete and maintain all paperwork, • Maintain vehicle and tools as per company policy, • Must have valid state driver's license and good driving record, • Willing and able to perform testing and maintenance, • Willing to identify and notate inspection deficiencies and service required to correct found deficiencies, • Able to work effectively in a team environment; ability to accurately work under pressure in meeting scheduled time frames., • Capability to work independently and complete duties and projects with moderate supervision (a must), • Strong customer service skills, • Meticulous attention to detail, • Excellent oral and written communication skills, • Maintain a clean and safe work environment, • Comply with and embrace all Core Values and the safety handbook

Job Description Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. The Ideal candidate must be willing to travel to support project needs. Essential Functions of the Position • Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. • Review and interpret project drawings, specifications, and quality requirements., • Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. • Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). • Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. • Verify materials and workmanship meet the project's approved submittals and standards., • Attend quality and coordination meetings as needed., • Ensure that all inspection and testing records are properly documented and archived., • Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements • High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. • Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. • In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.)., • Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). • Familiarity with construction materials and laboratory/field testing procedures., • Strong organizational and communication skills., • Proficiency with Microsoft Office Suite and QA/QC reporting tools., • Valid driver's license and the ability to travel to project sites. Preferred Certifications (Not Required, but a Plus): • ACI Concrete Field Testing Technician - Grade I, • NICET Certification in Civil/Construction Inspection, • OSHA 10 or 30 Certification, • ISO 9001 Quality Management Systems knowledge, • QMS/QA-related training or certifications Physical Requirements • Must be willing to work flexible schedules and overtime as needed by the department needs., • Ability to lift and carry a minimum of 40 lbs., • Drive a company vehicle in a safe manner, • Walk, stoop, bend, and climb up and down stairs and ladders, • Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel., • Work in high grounds and high open buildings, • Work outside for extended periods in the heat and cold, • Ability to wear appropriate PPE for hazardous materials, • Ability to read and write in EnglishAbout Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job DescriptionProject Inspector Location: Poolesville, MD Employment Type: Full-Time About the Role We are seeking an experienced Project Inspector to support construction projects throughout the Washington/Baltimore metropolitan area. This role is ideal for a construction professional with a strong background in quality assurance, quality control, construction management, and inspection services. The successful candidate will serve as the owner's representative in the field, ensuring projects are completed according to contract requirements, specifications, safety standards, and quality expectations. Key Responsibilities • Conduct construction inspections to verify compliance with contract plans, specifications, approved submittals, shop drawings, and applicable codes., • Prepare and maintain daily inspection reports and project documentation., • Identify, document, and track deficient work until corrective actions are completed., • Coordinate and communicate effectively with owners, contractors, architects, engineers, and project stakeholders., • Review and verify as-built documentation for accuracy and completeness., • Attend project meetings and assist with meeting documentation., • Support preparation of weekly and monthly project status reports., • Monitor all phases of construction and advise contractor representatives on corrective actions needed to maintain compliance., • Reject non-compliant work when authorized by the project owner., • Assist with contractor submittal reviews, including schedules, materials, and construction methods., • Participate in final inspections, develop punch lists, and verify completion of corrective work., • Provide professional customer service to project stakeholders and the public., • Support constructability reviews, cost estimating efforts, change order evaluations, and schedule reviews., • Maintain required certifications and participate in professional development activities.What We're Looking ForRequired Experience, • Minimum of 7 years of combined education and/or experience in construction quality management, inspection, or construction administration., • Experience with general construction and the installation of mechanical, electrical, plumbing (MEP), and related building systems., • Demonstrated expertise in quality assurance, quality control, construction management, engineering, or related disciplines., • Progressive career growth within the construction industry.Preferred Experience, • Experience supporting healthcare, laboratory, higher education, K-12, federal government, or local government construction projects., • Familiarity with both new construction and renovation projects.Education, • High School Diploma or GED with significant related construction experience., • Associate's degree in a related field preferred., • Bachelor's degree in Engineering, Architecture, Construction Management, or a related discipline is highly desirable.Certifications, • OSHA 30-Hour Certification required or ability to obtain within 3 months of hire., • Preferred certifications include:, • Construction Quality Management (CQM), • Certified Construction Manager (CCM), • Journeyman or Master-level trade certification/licenseSkills & Qualifications, • Strong understanding of construction methods, materials, codes, and industry standards., • Ability to read and interpret construction drawings, specifications, and contract documents., • Knowledge of quality assurance and quality control practices., • Strong written and verbal communication skills., • Proficiency with Microsoft Office Suite and web-based project management tools., • Ability to work independently while managing multiple project responsibilities., • Comfortable working outdoors, climbing ladders, navigating active construction sites, and working in varying weather conditions., • Ability to apply mathematical calculations and engineering principles to verify construction compliance.Compensation Salary Range: $85,000 – $105,000 annually Additional Requirements • Successful completion of a background check prior to employment., • Must be authorized to work in the United States without sponsorship.

Job Description TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Grand Prairie, Texas in 75050. Monday - Friday 1st Shift: - $18.00/hr - 7:30am - 4:00pm Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development • Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations • Check/inspect manufactured parts or products for defects, • Read and follow work instructions and general processes, • Use measuring or testing equipment as needed, • Ensure products meet quality standards, • Display excellent customer service, • Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management • Collect and record data Technical • Utilize company portal for time recording and policy acknowledgements Other • Any other duties as assigned Knowledge, skills, abilities Hard skills • Must be able to speak and read in the English language, • Good communications skills, • Must be able to multi-task, • Ability to work in a fast-paced environment, • Ability to handle sensitive and confidential material, • Ability to walk and stand for long periods of time, • Ability to bend, lift, twist and move freely, • Ability to periodically lift/move up to 50 pounds, • Must have reliable transportation Values & attitudes Global team spirit • Team player, • Caring for people, • Open-minded Excellence • Reactive, • Resilient to pressure, • Rigorous Customer focus • Client oriented, • Reliable & trustworthy, • Flexible Initiative • Autonomous, • Innovative, • Daring Work experience Overall recommendations • No experience necessary, • Ability to read blueprints a plus Education background Overall recommendations • High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability. Job Posted by ApplicantPro

Job Description Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Special Inspector to join our growing team. The Special Inspector will perform inspections and tests on construction materials and activities in the field to ensure compliance with project specifications, building codes, and relevant industry standards. This position requires strong technical knowledge, excellent communication skills, and a commitment to accuracy and integrity. Essential Functions of the Position • Perform field and/or laboratory inspections of construction materials and activities such as reinforced concrete, structural masonry, welding, soils, fireproofing, and structural steel. • Prepare and maintain detailed records of inspections, test results, and observations., • Interpret project plans, specifications, and codes to ensure compliance., • Communicate with project managers, contractors, and engineers to report findings and resolve issues. • Maintain certifications and continuing education as required. Minimum Requirements • High School Diploma or equivalent; Associates or Bachelor's degree in engineering, construction management, or related field preferred. • Minimum 3 years of experience in construction inspection or materials testing., • Current certifications in one or more of the following:, • ICC Special Inspection (e.g., Reinforced Concrete, Structural Masonry, Soils, Steel & Welding) • ACI Concrete Field Testing Technician - Grade I, • AWS Certified Welding Inspector (CWI), • NICET certification in construction or geotechnical inspection (preferred), • Strong understanding of IBC, ASTM, ACI, AWS, and other applicable codes and standards. • Valid driver's license and reliable transportation., • Ability to work independently in a field environment and maintain professionalism with clients and coworkers. Preferred Certifications (Not Required, but a Plus): • Experience working on commercial, residential, and infrastructure projects., • Ability to read and interpret blueprints and construction documents., • OSHA 10/30 certification. Physical Requirements • Must be willing to work flexible schedules and overtime as needed by the department needs., • Ability to lift and carry a minimum of 40 lbs., • Drive a company vehicle in a safe manner, • Walk, stoop, bend, and climb up and down stairs and ladders, • Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel., • Work in high grounds and high open buildings, • Work outside for extended periods in the heat and cold, • Ability to wear appropriate PPE for hazardous materials, • Ability to read and write in English, • Willing to travel to support projects when neededAbout Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job DescriptionDescription: About the Company: We provide specialized subcontracting and technical assistance services to support clients in the transport and aerospace industries. We work closely with clients to ensure that our solutions meet their needs and exceed their expectations. Our team members are motivated individuals that do remarkable things every day! Position Summary: AAA United States, Inc. has partnered with a company in Grand Prairie that is an international pioneer in the aerospace industry. They are a leader in designing, manufacturing and delivering aerospace products, services and solutions to customers on a global scale. A commercial aircraft manufacturer, with Space and Defense as well as Helicopters Divisions, they are the largest aeronautics and space company in Europe and a worldwide leader. Essential Functions: Inspection: 60% • Perform required technical inspections to receive or reject incoming material, airframes, aircraft components and to detect/report suspected unapproved parts, • Perform in-process inspections for components in electrical backshops, manufacturing, composites, MRO and paint shop to judge the serviceability or rejection of manufactured parts, electrical components, and paint, • Perform detailed inspections of manufactured components such as but not limited to dimensional checks and acoustic tap testing, • Inspect aircraft aluminium, titanium or steel structures for cracks, corrosion, damage and improper assembly., • Determine proper shimming and joining of structures with rivets or other hardware in accordance with design drawings, engineering disposition, and other approved data, • Detect hidden damage during inspections of airframe structures, components and sub-assemblies that could occur during shipping, receiving, or manufacturing, • Verify build of aircraft system wiring harnesses, connectors and electrical terminations as per design drawings, • Physically and systematically quarantine non-conforming components and assemblies identified during inspections, • Monitor the use of Measuring and Test Equipment to ensure it is well maintained and current relative to its calibration cycle, • Perform stock inspections/purges when notified of possible non-conforming/suspected unapproved material, • Evaluate and disposition sales returns, • Select product samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications etc.) to validate conformity to approved drawings and manuals, • Accomplish in-process and final quality inspections for conformity, maintenance, repair, modification, rework and overhaul of aircraft components and sub-assemblies, • Perform conformity inspections for Supplemental Type Certificated (STC) development projects, parts manufacturer approval (PMA) parts, structural and electrical components, • Inspect multiple airframe components to determine proper fit, form and function of the components, • Validate disposition of parts or repaired parts routed to shop floor, from warehouse, internal shops and suppliers for conformity and serviceability in accordance with approved data, • Qualify dynamic component parts applying visual inspection and precision measurement methods., • Observe and validate instrument connections, functional or operational tests, adjustments of aircraft radios, navigational systems and flight control systems and instruments to ensure they meet required specifications, • Ensure compliance with all applicable calendar/hourly inspections, life limited or cycle limited components, airworthiness directives and alert service bulletins, • Verification of testing for emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators and Air Data Computers in accordance with Title 14 CFR Parts 91, 135 and 43 Documentation: 30% • Ensure proper tagging, identification and airworthiness of parts released to Airframe, Engines, and Accessories, • Compare quantity, part number, and serial number of items received with procurement data, purchase orders and other specifications to ensure accuracy and completeness, • Create, distribute, track in SAP and disposition the monthly Shelf Life Expiration Date (SLED) report as directed, • Create QN/NCs for non-conforming material detected and coordinate with Quality Engineers on non-conformity resolution, • Ensure all materials have required documentation (i.e. 8130-3, EASA Form, Certificate of Conformance), • Process Goods Receipts during receiving of material, • Document applicable maintenance actions for airframe, engine, accessories and components in accordance with FAA and EASA approved regulations and company procedures., • Research airworthiness directives, service bulletins, and alert service bulletins for applicability to aircraft and/or components, • Read and validate engineering drawings, reports, and test specifications, • Properly identify and document items in quality quarantine cage, • Document and prepare airframe, engine, accessories or components for return to service after production, maintenance, overhaul, repair, inspection, test or modification, • Compose and prepare required delivery documentation in relation to qualifying the airworthiness or return to service of aircraft, engines, parts, components and systems Quality Department Support/Continuous Improvement: 10% • Apply Airbus Core Values to create an environment for success, set the example, uphold the standard and welcome challenges while maintaining integrity, commitment, confidence, teamwork, customer focus, respect and reliability, • Perform routine process audits to ensure necessary training, tooling and technical data are available for task completion, • Review quality procedures, processes, documents and forms used during daily activities for accuracy and completeness, • Ensure compliance with company policies, procedures and FAA & EASA Regulations, • Support Company events, departmental meetings, special projects and team meetings, • Demonstrate creativity by proposing innovations using lean methodologies to ensure that top company objectives (TCOs) are metRequirements:, • High School Diploma or equivalent, • 4 years of quality inspection on aircraft components and systems or 6 years as a certificated aviation maintenance technician (AMT) on aircraft components systems, • Current/Valid FAA Airframe & Power Plant License (external candidate only), • Ability to interpret technical and regulatory documentation, • Ability to effectively communicate verbally and in writing with all levels of personnel, • Familiar with inspection tools, aids and devices used in determining tolerances and specification limits, • Have the experience and flexibility to work in multiple areas Preferred: • Associates Degree in Aviation or related industry, • Minimum 6 years or equivalent diversified experience on Airbus Helicopters products as either a certificated AMT or quality inspector, • Current/Valid FAA Airframe & Power Plant License (internal candidate only), • FAA Inspection Authorization (IA), • FCC 2nd Class License, • Non Destructive Inspection (NDI) Certificate, • Knowledge, Skills, Demonstrated Capabilities

Job Description Firetrol Protection Systems is a national leader in fire protection and life safety services, founded in 1984. Firetrol is seeking a skilled and reliable Fire Alarm Multi Licensed Inspector to join our professional team. As a leading company in fire protection systems, Firetrol prides itself on quality service and expert solutions. The Fire Alarm Multi Licensed Inspector will be responsible for performing inspections, testing, and maintenance of fire alarm systems to ensure compliance with safety codes and regulations. The ideal candidate will demonstrate strong technical knowledge, attention to detail, and the ability to work independently while providing excellent customer service. Requirements • Valid multi-licensed certification for fire alarm inspections (including RME-I and FAL licenses in Texas)., • Minimum of 3-5 years of experience in fire alarm system inspections, testing, and maintenance., • Thorough knowledge of fire protection codes, NFPA standards, and industry best practices., • Strong problem-solving skills with the ability to troubleshoot system issues efficiently., • Good communication and interpersonal skills to interact professionally with clients., • Ability to work independently and manage time effectively., • Valid driver's license with a clean driving record., • Willingness to travel as needed. Benefits Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job Description Job Title: QC Inspector Job Description The QC Inspector performs detailed in-process and final inspections of printed circuit board assemblies to ensure they meet customer specifications and comply with industry standards. Serving as the final quality checkpoint in the manufacturing process, this role identifies defects, verifies rework, and confirms adherence to IPC-A-610, AS9100D, and ISO standards. The position requires strong attention to detail, proficiency with inspection tools, and the ability to maintain accurate quality documentation and traceability. Responsibilities • Perform detailed visual inspections of printed circuit board assemblies (PCBA) during in-process and final stages to ensure compliance with customer requirements and industry standards., • Conduct inspections under magnification using microscopes and other visual aids to evaluate high-density electronic assemblies., • Verify builds against blueprints, schematics, assembly drawings, BOMs, and routing instructions to confirm accuracy and completeness., • Identify and classify solder defects such as bridges, cold joints, insufficient solder, polarity issues, and missing or misaligned components., • Perform and document First Article Inspections, ensuring assemblies meet design and process requirements., • Validate rework and repairs to confirm that all defects have been corrected and that assemblies meet IPC-A-610 and related standards., • Collaborate closely with SMT and AOI teams to resolve quality issues and support continuous improvement efforts., • Use ERP/MRP systems to record inspection results, maintain traceability, and update quality records., • Document defects clearly and accurately, including description, location, and severity, to support production and engineering teams., • Ensure adherence to AS9100D and ISO quality system requirements throughout the inspection process., • Follow ESD protocols and handle sensitive electronic components with care to prevent damage., • Maintain a clean, organized, and safety-conscious inspection area and comply with all company procedures and work instructions. Essential Skills • 3–5 years of quality inspection experience in electronics manufacturing, specifically with printed circuit board assemblies (PCBA)., • Proven hands-on experience performing visual inspections on PCB assemblies under magnification., • Active or recent IPC-A-610 certification., • Strong ability to read and interpret blueprints, schematics, assembly drawings, BOMs, and routing instructions., • Expert-level component recognition for both SMT and through-hole components., • Demonstrated ability to conduct First Article Inspections and validate builds against BOMs and drawings., • Ability to identify solder defects including bridges, cold joints, insufficient solder, polarity issues, and missing parts., • Experience working with SMT and AOI teams in a production environment., • Experience using ERP/MRP systems to support inspection and documentation activities., • Knowledge of AS9100D and ISO quality standards in electronics manufacturing., • Excellent attention to detail and sustained focus when working with high-density electronic assemblies., • Strong communication skills for documenting defects and collaborating with production and engineering teams., • Visual acuity and comfort using microscopes and magnification tools for extended periods., • Manual dexterity for handling delicate, ESD-sensitive electronic components. Additional Skills & Qualifications • IPC J-STD-001 certification or demonstrated knowledge of IPC J-STD-001 standards (preferred)., • Experience in regulated environments such as aerospace and medical device manufacturing., • Familiarity with IPC-A-610 beyond certification, including practical application in a production setting., • Experience in working within structured quality systems aligned with AS9100D and ISO requirements., • Ability to thrive in a collaborative, cross-functional environment with engineering, AOI, SMT, and production teams. Why Work Here? You will contribute directly to the reliability and safety of products used in highly regulated industries such as aerospace and medical devices, serving as a critical gatekeeper for quality. The organization offers strong stability and clear growth opportunities within quality assurance career paths, allowing you to deepen and maintain your IPC certifications. You will work in a collaborative environment alongside engineering, AOI, and production teams, where your expertise is valued and your input helps shape continuous improvement in manufacturing quality. Work Environment This role is based in an electronics manufacturing and inspection setting focused on printed circuit board assemblies. You will spend extended periods using microscopes and magnification tools at dedicated inspection stations, which may require sitting or standing for long durations. The work involves handling delicate electronic assemblies under strict ESD protocols and operating within a high attention-to-detail, quality-focused atmosphere. The environment emphasizes adherence to documented procedures, quality standards, and safety practices while supporting close collaboration with SMT, AOI, and other production teams.Expe Job Type & Location This is a Contract to Hire position based out of Garland, TX. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Garland,TX. Application Deadline This position is anticipated to close on Jul 8, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: About Us Valor Healthcare is a veteran and physician-led provider of healthcare services for deserving, resilient patriots – those who serve or have served in the military as well as those who devote their careers to federal government service. We aim to deliver high-quality care in a way that upholds the health of our nation’s greatest asset: its people. Valor works hard to earn the trust of those who have faith in us to care for them with respect and through methods that lead to superior clinical outcomes. Valor is different because of our people. • Our leadership team is comprised of veteran, clinician, and business leaders dedicated to providing exceptional care and a world-class patient experience for our nation’s patriots., • Many of our colleagues have patriots in their families or are patriots themselves, building a company culture and commitment to customer service that is second to none. Valor Healthcare is looking for a passionate Primary Care Nurse Practitioner to join our team at the Community Based Outpatient Clinic (CBOC) in Williston, ND. In exchange for your dedication and experience, we are proud to offer a competitive salary, excellent benefits, generous time off and a weekday schedule. Our mission is simple: to provide quality healthcare to America's veterans through our healing focus, indebted hearts, and tireless resolve. Valor operates more than 50 VA CBOCs in the United States as a contractor for the U.S. Department of Veterans Affairs. We provide a full range of medical services to veterans through the operations of CBOCs, tailored to meet the specific needs of local VA medical centers. Our comprehensive set of services includes primary care, diagnostics, laboratory, telehealth, behavioral health, and more. As a Primary Care Nurse Practitioner, you will provide prescribed medical treatment and personal care services to patients with diseases and injuries seeking treatment in the clinic, as directed by physician or mid-level provider. You will collaborate with the core PACT Team (Primary Care Provider, RN and Medical Assistant) and expanded PACT Team including family/caregiver, VA, and community-based services involved in developing the patient care plan. Core Responsibilities • Actively diagnoses and treats our veterans under the direction and responsibility of a supervising physician., • Examines patient for symptoms of organic or congenital disorders., • Develops and implements patient management plans and assists in provision of continuity of care., • Orders and performs diagnostic tests, such as x-ray, electrocardiogram, laboratory tests, etc. and interprets test results for deviations from normal and provides patient notification and follow up care., • Counsel patients on the use of prescription medications, educates patients, assesses mental health issues, and provides routine health maintenance., • Evaluates patients’ records from medical providers outside the VA and works with these patients utilizing rules set forth by the VA for co-managed care., • Completes any and all clinical reminders “due” at the time of each patient visit., • Completes documentation of the medical record within 24 hours of a patient encounter., • Complies with all VA guidelines in regard to appropriate and timely response to all patient request, alerts and notifications, consults, orders, lab results, and diagnostic studies., • Complies with the VA formulary process and consult protocols., • Complies with all VA guidelines in regard to appropriate and timely clinical documentation, including the completion of all encounters by close of business., • Complies with all VA and company training requirements., • Fulfill compliance requirements of the Office of Inspector General (OIG), Joint Commission(JC), Environment of Care (EOC) oversight, lab compliance, and other related items., • Remain focused on achieving excellent clinical outcomes through the specified VA guidelines., • Must provide excellent customer service to each veteran, both in person and over the phone, as well as to fellow colleagues and clinic visitors., • Participate in the clinic’s outreach events to help support the clinic’s enrollment initiatives., • Support patient enrollment and retention by providing guidance, when necessary, regarding scheduling, follow-up visits or nurse visits., • Embrace and support new initiatives, whether clinical or operational.Requirements: Qualifications • Graduate of an accredited school of nursing and graduate of an accredited program for nurse practitioner (MSN required), including preceptorship, • Certification by applicable professional organization, • Minimum one-year clinical experience (three years preferred) as a CRNP within the last 4 years in a related primary care or ambulatory care setting; government healthcare environment preferred. Specific requirements could vary based on individual VA contract., • Must be credentialed and remain in good standing through the Veterans Health Administration (VA)., • Must comply with and maintain all requirements for a valid, unrestricted license in the state of desired employment, or in any U.S. state or territory, depending on VA contractual requirements., • Current certification in Basic Life Support (must be renewed periodically as specified by the certifying agency – AHA valid for two years, e.g.) and in ACLS as specified by individual VAMC contract, • Current, unrestricted Drug Enforcement Administration (DEA) registration, • Proficiency in written and spoken English., • Strong computer skills, • Energetic and optimistic demeanor, • Strong service mentality and a focus on achieving all aspects of defined service standards, • This is considered a safety sensitive position. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected veteran status. Final compensation will be based on relevant factors including work experience, skills, certifications, and internal equity.

Job DescriptionDescription: Position Summary: Maintenance Technicians are responsible to the Maintenance Supervisor and shall assure that the procedure outlined in this manual as well as all FAA Regulations and manufacturer’s instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, and major inspections on HondaJet, Piper, TBM, Pilatus, LearJets, Beechjet, Citations and other corporate aircraft. Troubleshooting, repair, and modification of aircraft systems and engines is accomplished by this position. In addition, component removal and reinstallation, operational checks, leak checks, and engine runs are all within the responsibility of the AMT. The AMT is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: • Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator., • Responsible for planning and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency., • Ensure that all work accomplished will be completed in strict accordance with the manufacturer's maintenance and repair instructions and TITLE 14 CFR part 43., • Exercise all reasonable care to protect all parts- sub assembles; major assembles and completed units against loss or damage., • Ensure that all applicable repair station forms utilized are properly completed., • Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times., • Ensure that proper tools and equipment are available, and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate., • Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department., • Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders., • Communicates with the maintenance lead technicians concerning progress of the assigned work., • Perform airframe and powerplant repairs, inspections and modifications., • Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system., • Interpret technical manuals, drawings and blueprints., • Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc., • Displays and promotes a positive attitude toward work and other employees., • Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect., • Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks., • Identify any employees' problems and concerns and deal with them, if unable to solve the problems, forward them to management., • Technicians shall have all their work inspected (except for off-site maintenance, see off-site maintenance requirements) by an appropriately rated inspector as listed on the Roster of Management Supervisory and Inspection Personnel at the completion of each task., • Participates with management to strategize and implement new maintenance tactics., • Provide leadership and communication to subordinates and employees., • Performs related work as assigned.Requirements: Education: • Five or more years related experience and/or training; or equivalent combination of education and experience., • Airframe and Powerplant (A&P) Certificate (Preferred). Experience: • Five or more years demonstrated experience in aircraft maintenance inspections and repairs., • Strong understanding in 135 and 145 repair station operations/regulations required. Other Requirements: • Clean driving record., • Able to pass a background check., • Ability to pass a drug screening test., • Willing to work off location, if needed., • Willing to work weekends, if needed. Ideal candidate will have the following work styles: • Attention to detail., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace., • Results oriented Proven ability to achieve goals. Follows through and meets deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills., • Communication Oral Communication speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions; Participates in meetings. Written Communication Writes material in clear concise terms.

Job Description Job Summary We are looking for a skilled and experienced Master Plumber to join our team! $75,000 base draw against commission. $87.50 paid per billable hour for hands on work performed. Exceptional commission paid for project management on all assigned calls and projects. NO CAP ON COMMISIIONS! Job performance includes hands on repairs and installation, estimating, material take offs, supervising, inspection, pulling permits and city inspector meetings. Must have truck/van, tools, and positive attitude toward all calls big or small. Benefits and retirement options available. In this role, you will perform diagnostics, service, and installation of plumbing in residential and commercial environments. You must be; a licensed Plumber with a commitment to quality in all the work you do. A team player who is comfortable working independently, love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities • Fluent or Intermediate English and Spanish is preferred., • Assemble pipe sections, tubing, or fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, soldering, brazing, or welding equipment, • Install pipe assemblies, fittings, valves, appliances such as dishwashers or water heaters, or fixtures such as sinks and toilets, using hand or power tools, • Plan the layout of plumbing, using drawings, • Perform maintenance of water supply systems, • Install and maintain gas and liquid heating systems, • Professionally interact with customers and clearly communicate work orders and statuses Qualifications, • Valid Plumbing License, • Minimum 1 year of professional experience, • Strong knowledge of hydraulic systems, • Ability to handle plumbing tools and equipment

Job DescriptionFoster CM Group is seeking an experienced VERTICAL CONSTRUCTION INSPECTOR for a full-time position located in Dallas, Texas. The ideal candidate will have 7+ years of experience in vertical building construction, with a strong understanding of building systems, construction methods, and quality control processes across commercial or institutional projects. Position Summary The Vertical Construction Inspector will be monitoring construction activities to ensure compliance with contract documents, building codes, safety standards, and project specifications. This role supports the successful delivery of new school construction, renovations, and facility upgrades, including coordination across structural, architectural, and MEP systems. Key Responsibilities • Inspect construction activities for compliance with plans, specifications, codes, and contract requirements, • Monitor new construction and renovation work across school facilities, including:, • Structural systems, • Architectural finishes, • Mechanical, Electrical, and Plumbing (MEP) systems, • HVAC systems, • Building envelope and life safety systems, • Observe and document daily construction activities, progress, and deficiencies, • Identify and report non-conforming work and track corrective actions, • Review and verify contractor work for quality, completeness, and compliance, • Coordinate with Project Managers, contractors, and design teams to resolve field issues, • Participate in pre-construction meetings, progress meetings, and site walkthroughs, • Monitor contractor adherence to safety standards and site protocols, • Maintain accurate field documentation, including daily reports and inspection logs, • Support punch list development and project closeout activities, • Assist in verifying completion of work prior to acceptance Required Qualifications • Minimum 7 years of experience in vertical construction inspection or related field, • Experience inspecting commercial, institutional, or educational facilities, • Strong knowledge of building systems, construction methods, and materials, • Ability to read and interpret construction drawings, specifications, and contract documents, • Familiarity with applicable building codes and safety regulations, • Strong documentation and reporting skills, • Ability to work in active construction environments, • Valid driver's license Preferred Certifications • ICC (International Code Council) Building Inspector Certification, • OSHA 30 Certification, • Certifications or experience related to:, • MEP Systems, • HVAC Systems, • Facilities or Building Inspections Work Environment: • The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving machinery & mechanical parts, uneven ground, exposure to dust, gas or fumes, exposure to loud noise, and outside weather conditions.Physical Requirements:, • The physical requirements must be met by an employee to successfully perform the essential functions of this job. Intermittent unassisted sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, stooping, crawling, pushing and lifting is required. Must be able to walk and/or stand for prolonged periods of time for at least eight hours per day. The employee must frequently lift and/or move light equipment up to 50 pounds without assistance. Must be alert to equipment in the field, occasional need to work near hazardous equipment and machinery, ability to walk on uneven ground while physically maneuvering construction sites, ability to work in extreme temperatures or humidity, and potentially work at heights.Other Requirements:, • Possession of a valid state of residence driver's license with a clean driving record., • Daily travel to and from construction sites, generally within 100 miles from the home office is expected. Short term, out of town, assignments may be required. Long term, out of town, assignments may be required, with advance notice of planned dates., • May be required to work protracted and irregular hours to meet client's needs, including nights, overtime and weekends., • All positions at Foster CM Group require an applicant who has accepted an employment offer to undergo a background check. Background checks may include, SSN/SIN validation, education verification, employment verification, criminal background check, fingerprint verification, and/or drug test. All employment offers are contingent upon successful results of required background checks.Foster CM Group Benefits (benefit package which includes both employer and employee paid plans):, • Medical Insurance to include HSA and FSA benefits, • Dental Insurance, • Vision Insurance, • Prescription Drug, • Telehealth Benefits, • Life Insurance, • STD paid by the Company, • LTD paid by the Company, • Employee Assistance Program (EAP), • 401 (K) with Company Match, • Vacation, • Holidays, • Paid Time Off (PTO), • Financial Wellness, • Pet InsuranceFoster CM Group, Inc. is an Equal Opportunity Employer. This means that Foster CM Group does not discriminate on the basis of race, religion, sex (gender), age, disability, national origin, genetic information, or sexual orientation. All individuals are encouraged to apply and compete for jobs. #LI-Onsite #ZR

Job Description Job Title: Quality Control Inspector Location: Carrollton, TX Shift 2nd- 2:00PM TO 10:30PM (M-F) Rate Range- $16-$19/hr Job Purpose: Inspects parts, assemblies, accessories, and other materials for conformance to specification using precision measuring instruments and devices. Examines for work defects in materials, work, and damage occurring in transit Compares quantity and part number of items received with procurement data and other specifications to ensure completeness and accuracy of order. Inspects and measures items for dimensional accuracy, fit, alignment and functional operation, according drawings, product data sheets, industry standards, and other specifications, using precision measuring instruments and devices. Approves or rejects items, and records inspection and disposition information. May inspect outgoing and production line parts and materials. May perform manufacturing audits against control plans to validate conformance to process requirements. Role and Responsibilities: Perform inspections of parts, sub-assemblies or finished company products according to well defined criteria using standard physical, mechanical, and/or electrical measurements. Rework or reject sub-assemblies or finished products as required. Conduct and document process and system audits using written procedures as audit standards. Accurately document the results of the inspections and testing. Maintain all controlled document files and test records in a timely and accurate manner. Participate in the construction and/or revision of SOPs for the inspection function. Assist in the writing and updating inspection procedures, protocol and checklists. Evaluate problems and make initial recommendations for possible corrective action to supervisor. Skills and Experience: High School diploma or equivalent 2-4 years practical experience in Quality Control in a manufacturing environment Ability to use standard inspection, measurement and test equipment Computer literate with the ability to use standard office suite of applications

Job DescriptionDescription: Position Summary: Avionics Technicians are responsible to the Avionics Supervisor and shall assure that the procedure outlined in the repair station manual as well as all FAA Regulations and manufacturer’s instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, repairs, troubleshooting, modification of aircraft systems, and installations. In addition, component removal and reinstallation, operational checks, and leak checks are all within the responsibility of the avionics technician. The avionics technician is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions and Responsibilities: • Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator., • Responsible for following the coordinated activities of their shop or area, so as to minimize delays and increase production and efficiency., • Ensure that all work accomplished will be completed in strict accordance with the manufacturer’s maintenance and repair instructions and TITLE 14 CFR part 43., • Exercise all reasonable care to protect all parts-sub assembles; major assembles and completed units against loss or damage., • Ensure that all applicable repair station forms utilized are properly completed., • Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times., • Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. The technician will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate., • Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department., • Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders., • Communicates with the avionics supervisor concerning progress of the assigned work., • Perform airframe electrical, avionics repairs, inspections, installations and modifications., • Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system., • Interpret technical manuals, drawings and blueprints., • Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc…, • Displays and promotes a positive attitude toward work and other employees., • Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect., • Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks., • Technicians shall have all their work inspected (except for off-site repairs, see off-site maintenance requirements) by an appropriately rated inspector as listed on the “Roster of Management Supervisory and Inspection Personnel” at the completion of each task., • Participates with management to strategize and implement new maintenance tactics., • Provide leadership and communication to other fellow employees., • Performs additional duties as assigned. Supervisory Responsibilities: No Requirements: Physical Demands: This work requires the following physical activities. • Occasional lifting up to 50 pounds. Environmental Conditions: • Industrial/Hangar environment. Minimum Education Requirement: • Two or more years related experience and/or training; or equivalent combination of education and experience., • Airframe and Powerplant (A&P) Certificate (preferred), • Federal Communication Commission (FCC) License (optional), • Must have High School Diploma or GED Minimum Work Experience Requirement: • Strong understanding in 145 repair station operations/regulations required., • Two or more years demonstrated experience in aircraft avionics installations and repairs. Other Requirements: • Clean driving record., • Able to pass a background check., • Ability to pass a drug screening test. Qualifications/Special Skills and Certifications: • Results oriented – Proven ability to achieve goals. Follow through and meet deadlines; Strong organizational, multi-tasking and time management skills; Strong problem-solving and analytical skills., • Communication – Oral Communication – speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions. Written Communication – Writes material in clear concise terms., • Leadership – Exhibits confidence in self and to others; Inspires and motivates others to perform well; Effectively influences actions and opinions of others; Inspires respect and trust; Accepts feedback from other. Displays passion and optimism; Mobilizes others to fulfill the vision., • Computer – Knowledge of MS Office Software, AutoCAD, and Corridor. (preferred), • Overall knowledge of aircraft that are worked by this location. Ideal candidate will have the following work styles: • Attention to detail., • Persistence in the face of obstacles., • A willingness to take on responsibilities and challenges., • Being reliable, responsible, and dependable, and fulfilling obligations., • Being pleasant with others on the job and displaying a good-natured, cooperative attitude., • Being sensitive to others' needs and feelings and being understanding and helpful on the job., • Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods., • Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations., • Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace.

Job Description Do you have a keen eye for detail? Are you ready to take your career to new heights and utilize your Quality Control and/or Inspection skills at a great new job? PDS Tech Commercial has just the job for you! In partnership with an industry leader in electromechanical, manufacturing, engineering, and supply chain solutions we are looking to add to their Quality Assurance – Inspection team in the Richardson market. This amazing opportunity will allow you to not only get your foot in the door at a great company, but also allow you to utilize and grow your skill set in a fast-paced production environment. Pay: $20-21/hr (1st shift) - $22-23.10/hr (2nd shift) Schedule: Monday through Friday (OT available) 1st shift = 7:15am - 4pm 2nd shift = 4pm - 12:45am As a Quality Control Inspector, you will be responsible for providing quality support to ensure the material review for purchased or consigned parts meet quality standards through electrical, visual and/or mechanical examination to ensure conformance to specifications. What You’ll Be Doing Perform and record inspections on the raw material & products to verify acceptability Separate and return non-conforming materials Support review & correction of the uploaded files and format of documents in the document control system Monitors product quality problems and escalates to Quality Team Leader as needed. Use equipment such as microscopes, optical comparators, pin gauges, coordinate measuring machine, surface plate and various hand tools to verify parts meet dimensional specs and tolerances What We’re Looking For High School education or equivalent (electronics and mechanical vocational training desirable) Must have electrical testing experience 2+ year experience in a quality or technical related position Demonstrates the ability to make inspection decisions through the use of blueprints, inspection procedures and process sheets. Working knowledge of measurement tools and inspection equipment required to test electrical components. Why Join PDS? Competitive hourly pay (paid weekly). Potential for temp-to-hire conversion for high-performing employees. Be part of a dynamic team, working in a fast-paced environment that values safety, efficiency, and teamwork. If you are ready to take your career to new heights - this role is for you! With growth opportunities and a comprehensive benefit package, the next step in your career is just a click away. Apply Today! Pay Details: $20.00 to $22.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionOur Core Values: The culture at Prism Health North Texas is built on our shared Core Values. We make hiring, firing, promotion and performance review decisions based on these values and behaviors, so it is important that you also share these Core Values: • We are solution seekers., • We have a can-do attitude., • We are mission driven., • We care about people. General Description: The Compliance Auditor serves as a key member of the Legal Affairs and Compliance Department and supports Prism Health North Texas' mission by promoting adherence to applicable federal, state, and grant-related regulatory requirements. This position is responsible for conducting compliance and clinical audits, overseeing patient incident reporting investigations, coordinating peer review activities, supporting audit readiness efforts, and partnering with clinical operations to ensure compliance with standards of care and grant requirements.ResponsibilitiesSpecific Responsibilities of the Job: • Conduct routine clinical, grant, regulatory, privacy, billing, and documentation compliance audits, and report results to compliance and quality committees and other workgroups., • Assist the Director, Compliance and Privacy in developing and maintaining the annual compliance audit and monitoring work plan., • Assist the Director, Compliance and Privacy in coordinating and preparing for external audits, reviews, and site visits, including coordinating audit readiness activities and mock audits to assess preparedness for HRSA Operational Site Visits and Ryan White Program monitoring., • Coordinate provider peer review activities, and support compliance monitoring activities and compliance initiatives as assigned., • Coordinate and oversee investigations related to patient incidents, complaints, and compliance concerns, ensuring that investigations are completed timely and in accordance with organizational policies and regulatory requirements., • Analyze compliance, quality, incident and audit data to identify trends, emerging risks and patient safety risks., • Review, revise and make recommendations for clinical and compliance policies and procedures to ensure alignment with regulatory requirements, standards of care, and organizational practices., • Maintain a working knowledge of applicable federal, state, local, and grant-related regulatory requirements, including but not limited to Health Resources and Services Administration (HRSA) regulations and requirements, Federally Qualified Health Center (FQHC) program requirements, Ryan White HIV/AIDS Program requirements, 340B Drug Pricing Program compliance requirements, HIPAA Privacy, Security, and Breach Notification Rules, Medicare and Medicaid program requirements, Fraud, waste, and abuse laws and regulations, Office of Inspector General (OIG) compliance guidance, Applicable Texas healthcare regulations and reporting requirements, Clinical documentation, quality, and patient safety standards.Required SkillsRequired Knowledge, Skills, and Abilities:, • Knowledge of healthcare compliance principles, auditing methodologies, and regulatory requirements., • Ability to interpret and apply federal, state, and grant-related regulations., • Strong investigative, critical thinking, and problem-solving skills., • Ability to prepare clear and concise audit reports and recommendations., • Excellent verbal and written communication skills., • Ability to establish effective working relationships across all levels of the organization., • Proficiency in electronic health records, Microsoft Office applications, and data analysis tools., • Ability to manage multiple projects and deadlines while maintaining confidentiality and professionalism. Required Education and Experience: • Bachelor's degree in Healthcare Administration, Nursing, Public Health, Health Information Management, Business Administration, Compliance, or a related field., • Minimum of three (3) years of healthcare compliance, auditing, quality, risk management, clinical auditing, or related experience., • Experience conducting audits, investigations, compliance monitoring, or regulatory reviews in a healthcare setting., • Strong analytical, organizational, and report-writing skills., • Clinical experience in a healthcare setting strongly preferred., • Experience in a Federally Qualified Health Center (FQHC), community health center, public health organization, hospital, or healthcare system preferred., • Relevant professional certification such as Certified in Healthcare Compliance (CHC), Certified Compliance and Ethics Professional (CCEP), Certified in Healthcare Privacy Compliance (CHPC) a plus.

Job DescriptionCompany Description About Smiths Interconnect: Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world’s most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Job Purpose: Inspection of parts to design tolerances to ensure the quality of the product prior to use in manufacturing. Responsibilities: • Inspect new parts received from internal and external suppliers in a timely with little supervision. Identify & report defects to Quality Manager or Quality Engineer, • Partner daily with Quality Manager for priorities and inspection needs., • Report non-conforming material to Quality Manager or Quality Engineer, • Know how to read and interpret engineering drawings, including GD&T callouts, • Know the production priorities for the work day and help to assure the completion of production priority work., • Assist in creation of NCRs for product which fails inspection, • Perform sorting operations when the need arises, • Other duties as assigned, depending on the needs of the site Qualifications Technical Knowledge, Skills and Abilities: • Time management skills., • Must be adaptable to a changing work environment, completing jobs and must be able to deal with frequent change, delays, or unexpected events., • Attention to details and ability to focus on assignment., • Knowledge of reading engineering technical drawings, including GD&T callouts, • Effective English communication skills, including writing., • Good problem solving and Quality background strongly preferred., • Knowledge of inspection tools (i.e. scopes, calipers, micrometers, etc) along with ability to focus for an extended amount of time while using microscope., • Knowledge or experience with visual inspection tools, such as Keyence or OGP SmartScope, is highly preferred, • Have good computer skills and able to use Microsoft office products., • Must be able to work weekends when needed. Planning and Decision Making: • Excellent organizational skill to manage the daily shipment prioritization requirements, • Speedy communication of defects found, • Ability to prioritize and complete ongoing tasks Impact and Scope: • 100% of product to be inspected prior to shipping., • 100% Customer Satisfaction Identified training mandatory for the role to be completed competently • Reading of engineering drawings, • Operation and proficiency of Keyence vision systems and OGP SmartScope Key Internal & External Stakeholders & Relationships • Quality Manager, • Manufacturing, • Engineering, • Planning Travel %: 0 Security: US Citizen Required Additional Information Why Smiths Interconnect? • Global Impact: As part of Smiths Group, a global engineering leader, you’ll be working on ground-breaking technologies that make a difference in industries that are shaping the future., • Career Growth: Opportunities for professional development and career progression across Smiths Interconnect and the wider Smiths Group., • Innovative Culture: Join a collaborative and innovative team, where your ideas and contributions are valued and rewarded., • Competitive Package: We offer a competitive salary, benefits package, and performance-related incentives., • Location: Dundee is an exciting city with a growing tech sector and vibrant cultural scene, making it a great place to live and work. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Join the worldwide leader in playing cards and in “play” solutions. Play is what keeps us going, and it always has been our greatest motivation. That's why we live different, play different. At Cartamundi Dallas, a Quality Control Lead reports to the Quality Supervisor and is primarily responsible for supporting both the Quality Control (QC) team, Quality Supervisor, and the operations team in their daily activities. The Quality Lead covers for the supervisor during absences (meeting, time off, etc). The QC Lead is also responsible for overseeing and maintaining the QC sampling program, as well as supporting the Quality Supervisor with the QC training program. The QC lead will work closely with the quality supervisor, QC inspectors, as well as operators and supervisors or leads in the production areas. What you’ll do as Quality Control Lead: • Maintain the QC sample program, including reviewing samples daily (usually from the previous day) to check for accuracy and auditing for potential errors that were missed. This also includes maintaining an organized sample archive., • Assisting the Quality Supervisor in creating training resources and training QC inspectors as needed., • The QC lead will develop a strong working knowledge of all production processes and inspection processes, including AQL inspection., • Perform process audits., • The QC Lead is responsible for product audits, which include generating a report, archiving samples, and limited customer communication regarding the outcome of the audits and delivering customer samples to clients., • The quality lead will sometimes step in for QC inspectors when there is a gap in staffing., • Writing formal “notifications” (using a template) when a defect or nonconformity is discovered., • Reading and interpreting product specifications., • Assist Quality Engineers with investigations as necessary., • Review quality holds, assist Quality Engineers (“QEs”) and Quality inspectors with containment and disposition of quality holds., • Assist the Quality Supervisor with daily shift hand-off meetings., • Assist QC inspectors and/or QEs with AQL inspections, including organizing an AQL inspection autonomously., • Organizing and participating in regular 5S activities (maintaining a clean, organized work area)., • Support operations team at a higher level than QC inspectors by assisting with project specifications, line configurations, and information resources. We’re looking for a Quality Control Inspector with: • High school diploma or equivalent required., • College degree (min. Associates) preferred., • Experience in Quality and/or manufacturing preferred but not required., • Bilingual English and Spanish preferred., • Strong verbal and written communication skills., • Must be able to read and interpret internal and customer product specifications., • Strong attention to detail is necessary., • Basic MS Office suite skills (Word, Excel, PowerPoint), • SAP experience is a plus but not required., • Strong communication skills are required; conflict resolution is a plus but not required., • Experience in the Printing Industry a plus but not required. Benefits you can Expect from Cartamundi: • Competitive pay, • 401(k) with company match, • Health, dental, and vision insurance starting day one, • HSA (Health Savings Account) and FSA (Flexible Savings Account), • Life insurance, • Short-Term and Long-Term Disability, • Paid time off, • Tuition reimbursement, • Employee discounts on daycare, gym memberships, travel, and much more Physical requirements and working conditions: Our manufacturing plant is comprised of enclosed office and manufacturing space. This position requires the ability to: • Move throughout the entire facility to attend to various issues., • Work and communicate effectively with different teams in both the office and manufacturing setting in a bilingual (English and Spanish) work environment., • Standing, walking, moving for long periods of time., • Occasionally working at a computer depending on the assigned area., • Briefly lifting up to 40 pounds., • Occasionally de-stacking some boxes from pallets to investigate., • Cultivate good rapport with various personality types. Apply today and discover the magic of making a difference at Cartamundi! Cartamundi does not discriminate based on race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. For more information on E-Verify, or if you believe that your employer has violated its E-Verify responsibilities, please contact DHS dhs.gov/e-verify. Candidates must be 18 years old to work for Cartamundi. No agencies please. No sponsorship available. About Cartamundi: At Cartamundi, we're all united by our common belief that the world is better with play. Play is what keeps us going, and it always has been our greatest motivation. That's why we live different and play different. To us, it is not just an activity. It is a guiding mindset that reminds us to have fun, to be fair, to connect with people – across cultures and generations – and to embrace shared experiences. We are a worldwide leader in playing cards and in “play” solutions. Our owned brand portfolio includes a suite of heritage brands which go back as far as 1848, including global brands like Bicycle®, HRO®, Bee®, Copag®, Shuffle® and many locally loved brands. These brands combine craftsmanship with innovation as the basis for their continued relevance and positive contribution to the local communities that love and use these brands. At Cartamundi, we have significant expertise in printing; our presses have been running since 1765. Today, our company has become the largest playing cards and board game manufacturer in the world and the trusted partner of leading toy companies. We make well-known brands such as Monopoly®, Uno®, Magic: The Gathering®, Guess Who ®, Pokémon®, Trivial Pursuit® every day. As we look into the future and how entertainment evolves, we are bringing the digital world to the physical world and vice versa. We have a dedicated team of experts that is looking into future technologies, products, applications that can get our consumers and communities to truly live different and play different. We are still a family-owned company with headquarters in Belgium and have a global network of 16 manufacturing facilities, 6 design centers, 1 digital studio and 1 global R&D center.

Job Description JOB SUMMARY The Quality Inspector / EHS Technician is a dual-focused role who is responsible for performing daily inspections of Prolec GE Waukesha Components products and incoming vendor supplied raw materials and purchased parts, input of daily inspection data including CAR’s, QCO’s, NCR’s, ECR’s, population of Quality department databases for historical tracking and other duties as assigned while also ensuring daily compliance with Environmental, Health, and Safety (EHS) standards across operational areas. Reporting to the Quality / EHS Leader of the site, this role supports floor-level execution of safety processes by auditing compliance, verifying corrective actions, and validating adherence to company and regulatory requirements. The position plays a critical role in maintaining a safe working environment, preventing incidents, and reinforcing a strong safety culture aligned with corporate standards and regulatory obligations. PRINCIPLE DUTIES AND RESPONSIBILITIES • Daily inspection of Components products both finished and in process to drawing specifications and receiving inspection of vendor supplied products., • Inspection and test of components, small assemblies, DETC, N2, DCB/SCB and wiring inspection., • Interface with other internal departments and external customers or suppliers to resolve quality related issues., • Data entry of inspection results into Components Quality Department inspection logs., • Determining acceptance / reject of products and materials being inspected, • Support generation and maintenance of all quality records - Quality Procedures and Practices, and Quality Department databases., • Perform environmental, health, and safety audits/inspections (fire extinguishers, cranes and hoists, eyewash stations, electrical safety, PPE compliance, etc.), • Assist with investigation of accidents and near-misses to identify root causes and recommend risk-mitigation actions., • Assist with safety training sessions for employees., • Support contractor and non-routine work compliance assessments., • Support root cause analysis and support corrective action development., • Respond to emergency situations and support emergency response protocols as required., • Execute and meet weekly audit plans and schedules. KNOWLEDGE, SKILLS & ABILITIES • Basic knowledge of ISO 9001 Standards., • Familiar with basic measuring tools (i.e., calipers, scale, etc.)., • Familiar with engineering drawing reading., • Proven basic math skills., • Basic computer skills such as data entry, familiarity with Microsoft Word, Excel, and Windows., • Must learn, understand, and follow all Company Quality and EHS processes., • Must learn and develop skills in inspection / verification of Components products, assist with internal audits., • Working knowledge of OSHA regulations and general industry standards., • Basic understanding of high-risk safety programs including LOTO, confined space entry, work at heights, electrical safety, and hot work., • Basic understanding of incident investigation methodologies and root cause analysis techniques., • Understanding manufacturing processes and industrial safety best practices., • Strong auditing and inspection skills with attention to detail., • Effective written and verbal communication skills., • Ability to prepare reports and document findings accurately., • Problem-solving and analytical skills to identify trends and implement corrective actions., • Organizational and time-management skills to manage daily audit schedules., • Experience in Microsoft Office applications and EHS reporting systems., • Ability to work independently and make sound decisions within established guidelines., • Ability to observe employees and supervisors to drive compliance and safe behaviors., • Ability to manage multiple priorities in a fast-paced manufacturing environment., • Ability to respond effectively during emergency situations., • Ability to reference internal policies and procedures to ensure compliance. Required Education / Experience • High School Diploma or GED., • Basic knowledge of Geometric Tolerancing and QMS., • Basic knowledge of Environmental, Health, and Safety programs., • Some working knowledge of OSHA standards & requirements. Preferred Education / Experience • Associates Degree in Quality, Mechanical or Industrial Technology, or related field., • ASQ Certified Quality Inspector (CQI) or Certified Quality Technician (CQT)., • Familiar with QMS and ISO 9001 Standards., • At least one year of relevant experience or education in Environmental, Health, and Safety programs., • OSHA 10-Hour or 30-Hour certification., • Experience working in a manufacturing or industrial setting., • Experience conducting incident investigations and performing root cause analysis. ADDITIONAL INFORMATION Key Working Relationships • Operations Management, including Plant Supervision, Warehouse, Planning, Shop and Office employees. Strong interpersonal and communication skills are essential for success in this role. Must be able to work independently and manage multiple priorities in a fast-paced environment. Physical Demands Must be able to walk, stand, sit, stoop, squat, and kneel for extended periods of time. Must be able to lift and carry up to 50 pounds. Working Conditions This role is primarily based on the shop floor, with additional time spent in an office environment within a manufacturing facility. Some minimal travel may be required for training purposes.

Job Description Job: Electrical Engineer PE Location: Helena, MT (remote work is available) Description: FourFront Design, Inc. has an opening for a licensed Electrical Engineer. Responsible for designing electrical systems for commercial, industrial, and domestic buildings. Assist senior and lead engineers throughout the project to ensure that design components conform to municipal codes and engineering standards. Interact with clients and maintain good client relationships with future projects in mind. Assists with final checks for accuracy of final plans and specifications submitted to client. Must be willing to affix professional engineering seal to plans and specifications created under own creation or directly supervised assistants. Uses computer assisted engineering design software and equipment. For information on FourFront Design Inc., including more information on projects, services, and our company culture, visit our website at https://www.fourfrontdesign.com/. AAP/EEO Statement: As a federal contractor, we are an Equal Opportunity Employer for Minorities, Females, Protected Veterans and Persons with a Disability. Qualified applicants will be considered for employment without regard to race, color, sex, national origin, religion, age, marital status, veteran status, sexual orientation, disability, genetic information, or other characteristic protected under applicable Federal and State laws. About us: Mission: Craft legacies within the built environment that withstand challenges, elevate people, and leave a lasting impact. Culture: We aren’t just architects or engineers, FourFront’s people are as rich in experience and diverse in personal interest as the history of our great company. A shared goal in being deeply committed to where we live, work and play connects us all – and it makes us proud to be a Certified Woman-Owned Service-Disabled Veteran Owned Small Business. Pay wages: $86,000 - $110,000 annual (depending on experience and qualifications) Benefits: Paid vacation/sick accrual, 13 paid holidays, health, vision, dental, life insurance, disability insurance, retirement savings plan, paid parental leave, and continued education options. Details will be discussed during offer. Shift: 40 hours per week. Standard workdays and hours of FourFront Design Inc are Monday through Thursday, 7 AM to 5 PM and Friday 8 AM to 12 PM. Evening and weekend work may be required as job duties demand. Flexibility in schedule is considered if job duties are satisfactorily met. Experience Required: • Professional Engineering (PE) license required., • Minimum of 5 years previous electrical design experience., • Bachelor’s degree or equivalent qualifying experience., • Willingness to apply for additional state or professional license when required., • Knowledge of LEED principles; encouraged to become LEED accredited., • Proficiency in Revit MEP, AutoCAD required; Visual-3D helpful., • Preferred RCDD certification but not required., • Preferred government and Veteran Affairs (VA) experience but not required. Duties: • Function as an electrical project engineer; responsible for the electrical design of commercial, medical, professional offices and other buildings., • Complete electrical design systems including building related electrical power distribution, lighting, and cabling systems., • Assist in assessing the requirements of the client’s needs; Assure work meets the design and production aspects of the project., • Assist in project management tasks and be familiar with project management process., • Promote and provide expertise in sustainable design practices as required by the project., • Assist in the design review, construction budgets, and schedules and work accordingly to meet project requirements., • Apply proficient knowledge of applicable codes and ordnances. Work with code officials and other design professionals when an interpretation or exception to building codes is required., • Maintain up-to-date material and equipment/gear knowledge for selection, scheduling, design, analysis. Must be able to assist or perform evaluation of existing lighting, gear, and controls systems., • Interpret the intent of electrical contract drawings and specifications for the Client, General Contractor, Building Inspector, and other interested parties., • Review and redistribute schedules, shop drawings and samples., • Responsible for the accuracy and quality of all technical work., • Coordinate work of outside consultants., • Apply time-management skills for meeting deadlines., • Complete company-required drug test; completion of a background check and fingerprinting may be required by client., • Must be able to work in the United States. #hc234342

Job Description Onsite: Travel: 25% Join the Maverick Power Team! At Maverick Power, we don’t just build power distribution solutions—we redefine industry standards. Recognized on the 2025 Inc. 5000 list as #16 in the U.S., #2 in Manufacturing, and #1 in Texas, we are committed to driving innovation, quality, and speed. With multiple manufacturing facilities across North Texas and Phoenix, we are expanding rapidly and looking for top talent to grow with us If you are ready to be part of a high-energy, solutions-driven team where your work makes an impact, Maverick Power is the place for you. What We Offer: • Competitive Compensation + Bonus Potential!, • Paid Time Off, 401K Matching, Medical, Dental, and Vision Benefits!, • High-growth organization with advancement opportunities!, • Diverse, Collaborative, & Fun Work Environment! About the Role: The Quality Control Inspector is responsible for verifying that power distribution assemblies are built in accordance with engineering drawings, torque specifications, UL requirements, and internal quality standards. Supporting quality principles derived from Lean Manufacturing by detecting abnormalities early, escalating issues immediately, and protecting the customer from nonconforming products. Key Responsibilities: • Perform in-process and final inspections to verify assemblies meet electrical schematics, BOMs, and mechanical requirements, including wire routing, labeling, terminations, fastening, and torque markings., • Conduct torque audits using calibrated tools; verify hardware type, grade, and washer usage per engineering drawings., • Execute final visual inspections and perform Hi-Pot / dielectric testing prior to energization., • Complete inspection records accurately, document nonconformances, and tag, segregate, and support rework verification of defective material., • Identify, contain, and escalate abnormal or unsafe conditions by stopping shipment, placing product on hold, and coordinating re-inspection with Quality or Engineering., • Crosstrain in additional QC/QA functions, including receiving inspections and MRB/RMA processes, to support operational needs. Qualifications: • High school diploma, GED, or technical certification., • Must be able to read and understand electrical schematics and mechanical drawings. (Required), • Minimum of 2 years in manufacturing quality (electronics, defense, automotive, etc.)., • Basic understanding of UL & NEC standards., • Basic computer/data entry/Excel skills., • Use of hand tools - torque wrench, multi-meter, inspection gauges, etc. Preferred Qualifications: • Electrical wiring experience preferred., • Experience with ISO 9001 preferred. Physical Requirements: • Prolonged periods sitting, standing, walking, and performing repetitive tasks., • Comfortable with repetitive movement, kneeling, crouching, and stooping., • Requires using hands to handle, control, or feel objects, tools, or controls., • Requires lifting up to 40 pounds while bending, twisting and/or standing., • Must have vision correctable to 20/20 and be able to wear required PPE (hard hat, safety glasses, boots, gloves, etc.)., • Duties are performed in a loud production setting subject to extreme temperatures. Some duties may be required to be performed outside. Work Environment: May work in various settings at the Maverick Power facilities, in offices, in multiple shops, and in commercial buildings. Maintaining the same position or posture while performing tasks and sitting for prolonged periods. The above-noted job description is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the applicant a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of the position. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Company Overview Carie Boyd Pharmaceuticals is a national 503B FDA outsourcing registered facility, enabling us to meet the needs of our patients and prescribers through a variety of office use products including but not limited to injectables, pellets, and topicals. Being a member of the Carie Boyd team means prioritizing patient needs, dedication to quality, and the drive to continue to scale our innovative business in new and diverse ways. Responsibilities · Perform routine tasks including: · Sampling: personnel monitoring (PM) and environmental monitoring (EM) · Incubate and read sample plates (TSA and SDA) per standard operating procedures · Send off PM & EM samples to contract laboratory for identification · Confirm growth promotion test results · Documenting actions · Start-Up and In-Process Checks · Label Verification · Assist production to verify steps critical to quality of final product · Perform visual inspections · Enforce good hygiene practices and aseptic techniques in GMP areas · Successfully pass garbing qualification to enter clean rooms · Perform aseptic processing media fill simulations for personnel certifications and garb qualifications for personnel monitoring · Clearly communicate and enforce the company’s quality expectations outlined in standard operating procedures in a productive manner · Prepare product to be shipped to contract testing laboratories, select appropriate testing on portals, and correspond with laboratories, as needed · Perform GDP review of documents, as needed · Assist production with reconciliation, as needed · Assist Quality Management with other Quality Control duties, as needed Has the decision-making authority for the following: · Start-up and shut down of compounding suites Qualifications: · Minimum 3 years combined GMP experience in any of the following: contract manufacturing, food packaging or manufacturing, medical device, and / or 503B outsourcing facility. · Strong documentation skills · Cleanroom experience preferred, but not required · Aseptic Processing and Aseptic Technique skills preferred Confidentiality · The employee must maintain the confidentiality of company information and, pursuant to State and Federal Law (including the Health Insurance Portability and Accountability (HIPAA) Act of 1996), protected health information. EOE/ADA · Carie Boyd Pharmaceuticals is an Equal Opportunity Employer. In compliance with the Americans with Disabilities Act, Carie Boyd Pharmaceuticals will provide reasonable accommodations to qualified individuals with disabilities and encourages both prospective and current employees to discuss potential accommodations with the employer. Company DescriptionWe specialize in compounding office-use and personalized prescription medications.We specialize in compounding office-use and personalized prescription medications.

Job DescriptionRegal Staffing Services is hiring for Quality Assurance Inspector in the Carrollton area! Pay Rate: $20-23.00 /hr DOE Shift: 1st Shift (7:00am-3:30 PM, Monday - Friday) Must be flexible for overtime as needed Job Responsibilities: • Inspect products during key stages of assembly., • Maintain and update in-process inspection checklists., • Report critical in-line issues and challenges; develop clear visual guides for the assembly team., • Issue quality alerts for product or process non-conformances found on the production line., • Detect and correct defects immediately. Submit Non-Conformance Notices (NCNs) and support the Director of Quality with weekly NCN follow-ups., • Manage the MRB (Material Review Board) process, conduct real-time root cause analysis, and execute immediate dispositions., • Provide feedback to design and manufacturing engineers to improve drawings and work instructions., • Offer suggestions to improve product quality and overall process performance.Requirements:, • Bilingual is a MUST (Spanish/ English), • Use tools like calipers, micrometers, and height gauges, • 1-2 years’ experience in quality inspection, manufacturing, or a related field., • Strong attention to detail and ability to identify and correct defects quickly., • Working knowledge of root cause analysis and MRB procedures., • Self-motivated, organized, and capable of working independently in a fast-paced environment., • High school diploma, • Reliable transportation, • Pass a background checkHow to Apply:Apply Online: www.applyregal.comFor questions, please visit our Carrollton Branch: 2410 Luna Rd, Suite 180, Carrollton, TX

Job DescriptionDescription: Company Profile Astura Medical is quality driven, surgeon inspired, and innovative medical device company. We have a robust distribution channel combined with passion and innovation to drive our teams to achieve great success with developing medical devices and entering them into the spinal implant marketplace. We're centrally located in Irving, TX, near the Dallas/Fort Worth Airport, and we offer a collaborative work environment with casual dress and work-life balance. This position reports to the office 5-days per week and we do not have remote or hybrid opportunities. Only local candidates will be considered as we do not offer relocation assistance. Job Description Astura’s QC Inspector will perform various inspection techniques of medical devices. This position will report to the Quality Assurance Manager. Job Responsibilities · Mechanical measurements using; micrometer, caliper, comparator, misc. gauges. · Visual inspection using finish gauges · Functional inspection using hard gauges · Documenting and processing of inspection data and documentation Requirements: Qualifications · Understanding of measurement techniques and metrology: Caliper, Micrometer, Pin Gauges, Block Gauges, Optical Comparator · Good arithmetic skills required · GD&T experience is desired · Detail oriented · Organized · Experience with Microsoft Windows and Office Products: Excel, Word · Must have good English written and verbal communication skills · Experience in medical devices or aerospace is desired Education and Experience · Minimum of 3 years in all job responsibilities listed above (proficiency test will be conducted) · High School Diploma or equivalent Wage $23-$25/hr

Job DescriptionSalary: DOE Mechanical, Electrical, Plumbing Inspector (MEP) Dallas, TX Mechanical, Electrical, Plumbing Inspector (MEP) Dallas, TX Full-Time | On-Site | Dallas, TX Why CMTS? Every day at CMTS, our team delivers infrastructure projects that positively impact lives and communities. With over 42 years of industry experience, CMTS has built a strong foundation for continued success, providing project and construction management services to public and private clients nationwide. We value our employees by fostering a culture of learning, professional development, and collaboration. CMTS is committed to maintaining a work environment that emphasizes safety, integrity, and accountability while supporting work-life balance and employee well-being. Our teams are empowered to grow, contribute, and make a meaningful impact through the projects we deliver. About Your Role The MEP Inspector is responsible for monitoring and inspecting mechanical, electrical, and plumbing construction activities to ensure that all installations comply with approved construction documents, project specifications, applicable codes, and quality standards. This position supports the Construction Management and Inspection team by verifying proper installation of building systems including HVAC, electrical distribution, plumbing infrastructure, and associated utility systems. The inspector will work closely with project managers, resident engineers, contractors, and design consultants to ensure compliance with contract requirements and maintain quality throughout construction. Education Requirements • High School Diploma or equivalent required., • Associate or bachelors degree in engineering, Construction Management, or a related technical field is preferred. What Youll Need to Get the Job Done • Minimum 5 to 10 years of experience performing MEP inspection or construction inspection on commercial, infrastructure, or transportation projects., • Demonstrated experience inspecting mechanical, electrical, and plumbing systems including HVAC equipment, electrical distribution systems, fire life safety systems, and plumbing systems., • Ability to read and interpret construction drawings, system diagrams, and project specifications., • Experience working in complex construction environments such as airports, transportation facilities, data centers, healthcare facilities, or large commercial projects., • Strong knowledge of construction inspection procedures, quality assurance practices, and industry codes., • Strong written and verbal communication skills with the ability to coordinate with contractors and project teams. What Will Make You Stand Out • Certifications such as ICC Inspector, NICET, OSHA 30, or related inspection credentials. - Preferred, • Experience supporting aviation, transportation, or large capital infrastructure programs. - Preferred, • Familiarity with applicable codes and standards including NEC, NFPA, ASHRAE, OSHA, and local building codes. - Preferred, • Experience with construction management software such as Procore, Bluebeam, BIM 360, Prolog, or similar platforms. - Preferred What Youll Do • Inspect mechanical, electrical, and plumbing systems to verify compliance with approved plans, specifications, and applicable building codes., • Monitor contractor installation of HVAC equipment, ductwork, piping systems, pumps, electrical distribution equipment, conduit systems, lighting, plumbing infrastructure, and related building systems., • Review and interpret construction drawings, specifications, shop drawings, and submittals to verify proper installation of MEP systems., • Verify that materials and equipment used in construction conform to approved submittals and project specifications., • Observe system testing, commissioning, and startup activities for mechanical and electrical systems., • Identify deficiencies, non conforming work, and potential system issues and coordinate resolution with the construction management team and contractor., • Document inspection activities through daily reports, inspection logs, deficiency tracking, and photographic documentation., • Participate in construction coordination meetings and assist with resolution of field issues., • Monitor contractor compliance with safety regulations and applicable OSHA requirements., • Support punch list inspections and final acceptance of MEP systems., • Maintain clear and accurate documentation of inspection activities in accordance with project quality assurance requirements. What You Can Expect from CMTS • Opportunities to work on high-impact infrastructure projects across the United States and the U.S. Virgin Islands, • Collaborative and growth-focused team environment, • Competitive compensation, • CMTS LLC offers 100% company-paid medical, dental, vision, 401k, life, and long-term disability insurance coverage for the employee., • Career advancement and professional development opportunities Salary Requirements • DOE Apply Now ! www.cmtsllc.com/careers/ Equal Employment Opportunity CMTS, LLC is an Equal Opportunity Employer that does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, pregnancy, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state, or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment.

Job Description Company Overview Berkshire Residential Investments is a people-first real estate investment company who values not only the impact we make as a company, but the time we spend together in our high-performing teams. We value individual skills and perspectives to allow us to best serve our employees, investors, residents, and other stakeholders. If you're interested in a workplace where everyone feels empowered to bring their full, authentic selves to work each day, come join our talented and growing team at Berkshire Residential Investments. Our environment of entrepreneurial spirit, culture of expertise and our people-first approach will allow you to thrive while continuing to grow in your career. ....Tag you're it!!!!!....Our "IT factor" means we are the best in what we do and are always striving to be even better!Team "IT FACTOR"Berkshire is a nationally respected property management team that creates memorable and valuable experiences for all of our stakeholders by attracting fun, engaging talent that is committed to excellence in everything we do! We own and manage our own properties, and we have one asset that sets us apart from the others –Berkshire people.We offer 3 weeks of vacation, personal development plans, great insurance, a 25% rent discount (and more!)... Take a look at what makes us different….Our vision is to kindle an exceptional experience one relationship, one investment, and one neighborhood at a time.Here is what your day might look like....As one of our Maintenance Technicians' you are our right-hand! You are cheerful, performance-driven, resident-focused, hardworking, seriously playful, and goes the extra mile. Your passion is for quality and excellence in service.So, here are a few of the things that we believe are essential to being the best Maintenance Technician there is: • Will own and help drive the preservation of the property's physical attributes, • Provide complete support to management in upholding community and corporate standards, policies and procedures, • Ensure that all safety measures are enforced, • Assist in maintaining the shop, company equipment, inventory control and ensuring key security, • Be an inspector! Curb appeal is imperative, make sure the property looks its' best, • Provide excellent customer service to all prospective and existing residents and your teammatesHere are some of the things you have already conquered!, • At least one year prior experience in the maintenance needs of a community, • Working knowledge of appliances, plumbing, electrical, carpentry, and building maintenance, • You are proficient in writing, speaking and understanding the English language, • You are able to use computers and related applications You are the ultimate jack of all trades! #ZR We believe Berkshire Residential values diversity, equity, inclusion and belonging. Berkshire is committed to providing equal opportunity in all practices, including employees and applicants for employment. We ensure that decisions affecting employees are made without regard to their race, color, creed, national origin, age, disability, gender, gender identity, sexual orientation, or any other protected status.

Job Description We're looking for State Inspectors with a of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. As a State Inspector, you'll be expected to perform light maintenance, fluid checks, and/or conduct quality inspections on our vehicles to look for any imperfections or repairs that may be needed throughout the post-production process. At Carvana, you'll receive a competitive wage and amazing perks – including a 401(k) with Carvana match and even a vehicle purchase discount – all while using state-of-the-art tools in one of our high-tech Inspection Centers ( to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. • 100% company-paid healthcare premiums, • Generous paid-time off and your birthday is a holiday!, • ASE and tool reimbursement programs, • Tuition reimbursement and student loan repayment Join the Carvana team by applying on this page, or call one of our recruiters by phone at (888) 508-4749, Monday through Friday, between 6 AM and 4 PM MST. We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: • Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process., • Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires, • Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles, • Experienced Technician (min 5 years of professional experience): perform extensive repairs and heavy engine work, as well as advanced vehicle diagnostics on all makes and models, including electric and hybrid vehicles We also have a variety of other automotive roles available in one of our 17 locations across the country – take a look at our Careers site to apply for one of the following roles: • Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles, • Auto Technician/Mechanic roles: LOF (Lube, Oil, and Filter), Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles, • Entry-Level roles: Detailing, Inventory Associate (Lot Attendant), Photobooth, Parts Associate, Inspection, and Coordinator/Administrator roles, • Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently, • Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check, • An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold), • Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Great Western Trailer (GWT) is actively hiring skilled and motivated Trailer Technicians to join our growing team at our Dallas, TX facility. If you have experience in semi-trailer maintenance and repair and are looking for a company that values your skills and dedication, we encourage you to apply today. Be a part of our team – Apply now! What’s in it for you? Weekly Paychecks – Get paid on time, every time. Weekday Schedule – Monday-Friday, 8:00 AM – 4:30 PM (No weekends!). Comprehensive Benefits Package – Health, dental, vision, and life insurance. 401K, Flexible Spending & Health Savings Account options. Paid Time Off & Sick Leave – Enjoy work-life balance. Employee Perks – Discounts, Employee Assistance Program, and a $400 Benefit Card. Who We’re Looking For GWT is looking for dedicated individuals who are: Quick Learners – Willing to follow instructions, ask questions, and grow their skills. Team Players – Punctual, reliable, and able to work independently or collaboratively. Detail-Oriented – Focused on quality, accuracy, and safety. Trailer Technician Responsibilities Inspect and repair semi-trailers, including brakes, wiring, bodywork, lift gates, and more. Install and replace add-on components such as toolboxes, winches, and ramp kits. Perform fabrication and welding as needed. Complete service reports and ensure all work meets quality and safety standards. Required Qualifications Reliable transportation to and from work. Own a personal set of hand tools (except in California). Strong mechanical aptitude and experience with semi-trailer equipment and maintenance. Ability to operate hand tools, power tools, and pneumatic tools safely and efficiently. Willingness to work overtime when needed. Preferred Qualifications Valid driver’s license (a plus, but not required). 3+ years of experience in semi-trailer repairs. Certified brake and FHWA inspector or ability to obtain certification. Industry certifications such as ASE or welding certification. Bilingual (Spanish) is a valuable asset. Physical Demands & Work Environment Frequent standing, walking, kneeling, and lifting (up to 50 lbs.). Work may be performed in a shop, yard, or mobile service environment. Exposure to mechanical parts, chemicals, fumes, and varying temperatures. Moderate to loud noise levels. About Great Western Trailer Great Western Trailer (GWT) is a fast-growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states—and more expansions coming soon! We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK. Apply Today! If you have the skills and passion for semi-trailer repair, we want to hear from you. Join a company that values your hard work and offers opportunities for career advancement. Apply now and take your career to the next level with Great Western Trailer in Dallas, TX! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Job DescriptionDescription:Working at Envision means having a job that’s more than just a way to make money. It's a job that makes a difference. We offer team members: • Careers with purpose., • Teamwork environment., • Amazing 401K Retirement Plan., • Envision Paid Life Insurance., • Medical, Dental, Vision, FSA Plans., • 10 Paid Holidays., • PTO & Vacation., • Tuition Reimbursement. POSITION SUMMARY:Responsible for maintaining Envision quality standards on all product lines by inspecting products and taking samples to ensure conformance specifications and to maintain required records and documentation. KEY RESPONSIBILITIES/ESSENTIAL FUNCTIONS INCLUDE: • Perform in-process quality testing procedures and techniques accurately and thoroughly. Record required data., • Coordinate with Operators and Maintenance Techs to correct quality problems., • Follow established quality procedures and make recommendations for improvements., • Provide solutions to a variety of technical/quality related problems of basic scope and complexity., • Participate in ISO internal audits as scheduled., • Ensure rejected material is properly labeled and controlled., • Refer questionable issues to Manager Quality/Safety., • Flexibility to perform other duties as assigned. Qualifications: JOB REQUIREMENTS INCLUDE: Education: • High School Diploma required. Bachelor’s degree preferred. Experience: • 1 to 3 years of experience in the quality field preferred.Knowledge/Skills:, • Basic computer skills necessary to operate word processing, spreadsheet, and web-based applications., • Ability to successfully complete the in-house ISO 9001 Internal Auditor training program., • Understanding of ISO 9001 concepts a plus., • Ability to learn process improvement methodology and application., • Working knowledge quality and manufacturing principles, theories and concepts., • Interpersonal and communication skills necessary to establish and maintain effective working relationships with co-workers, management, customers, and suppliers., • Leadership skills to make decisions with sound judgment and guide day-to-day operations successfully., • Ability to communicate effectively both verbally and in writing., • Ability to read blueprints, drawings, and interpret customer requirements and specifications. Licenses/Certifications: N/A SUPERVISORY RESPONSIBILITIES:Total Number of Employees Directly Supervising: 0Number of Subordinate Supervisors Reporting to Position: 0 VISION REQUIREMENTS INCLUDE:Can be performed with or without assistive technology: • Required to perform activities such as: preparing/analyzing data/figures; viewing a computer screen; reading; inspecting small objects for defects; using measuring devices; and/or assembling parts with close eye contact., • Required to perform activities such as: operating machinery and/or power tools at or within arm’s reach; performing non-repetitive tasks such as carpentry work or repairing machinery., • Required to review/inspect own assigned work, the work of others, or facilities or structures. Requires normal (or corrected to normal) vision/acuity:Required to operate motor vehicles and/or heavy equipment such as forklifts.“To improve the quality of life and provide inspiration and opportunity for people who are blind or visually impaired through employment, outreach, rehabilitation, education and research." Envisions Core Values are the authentic, unwavering principals that define and support our culture: • Integrity., • Curiosity., • Passion., • Initiative., • Teamwork., • Excellence. COMMENTS:Envision, Inc. is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without illegal discrimination because of race, color, sex, age, gender identity, disability, religion, citizenship, national origin, ancestry, military status or veteran status, marital status, sexual orientation, domestic violence victim status, predisposing genetic characteristics and genetic information, and any other status protected by law. Envision employs and advances in employment individuals with disabilities and veterans, and treats qualified individuals without discrimination on the basis of their physical or mental disability or veteran status. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. This position description is intended to convey generally the duties of this job. It is not an all-inclusive listing of duties, and it is not a contract, expressed or implied.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:The Quality Engineering Inspector is responsible for monitoring and ensuring conformance with production processes to ensure Quality Standards are met. The Quality Engineering Inspector is a critical role in the manufacturing of Unmanned Aerial Vehicles. As a Quality Engineering Inspector, you’ll play a vital role in ensuring every aircraft and its subcomponents we produce meets the highest standards of precision and reliability.What you'll do: • Ensure the assembly documentation is accurate and complete, • Observe assembly, lay-up, and torque operations, • Conduct dimensional inspections on both parts and assemblies, • Examine raw materials, piece-parts, and final assemblies, • Interpret specifications, drawings, tolerances, and additional requirements, • Document inspection and test results through logs, graphs, reports, and local systems, • Execute other tasks related to the position as directed by leadership Required qualifications:, • High School Diploma or GED required, • Minimum of 1-3 years of experience in a Quality Inspector role within aerospace manufacturing or a related industry, • Practical experience with various inspection techniques and equipment (DMM, calipers, micrometers, etc.), • Capable of performing inspections using assembly instructions and engineering drawings, • Demonstrated ability to use precision measurement tools and calibrated equipment effectively, • Strong technical and computer skills, with proficiency in Microsoft Office Suite (Word, Excel, PowerPoint), • Ability to communicate effectively, both orally and in writing, across various levels within the organization, • Detail-oriented with a strong understanding of quality-centric practices and processes Preferred qualifications:, • Associate or bachelor’s degree in engineering, Quality Assurance, or a related field is preferred, • Certification from a recognized quality institution like ASQ (American Society for Quality) is advantageous, • Certification in AS9100 or similar quality management standards in aerospace is a plus, • Exposure to Lean Manufacturing and Continuous Improvement methodologies, • Proficiency in reading, understanding, and interpreting technical documents, blueprints, and engineering drawings #LI-JM1#LB Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFor more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Inspector position in Bastrop, TX on a 6-month contract. The schedule is for the 2nd shift (2:30 PM-11 PM), full-time. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you!Key Responsibilities • Review and validate e-Cert packages for components, subassemblies, and final assemblies, • Verify inspection records, test results, certifications, signatures, and approval workflows, • Identify, document, and communicate discrepancies or nonconformances to Quality and Engineering, • Ensure compliance with drawings, specifications, QMS requirements, and build plans, including traceability, • Perform visual, dimensional, and physical inspections (incoming, in-process, final, and first article), • Conduct surface plate inspections and lot sampling as required, • Use precision tools such as micrometers, calipers, height gauges, dial indicators, and profilometers, • Inspect workmanship issues (burrs, scratches, fasteners, edge distance, damage), • Verify corrective actions and rework completion, • Review shipping documentation and confirm proper packaging and preservation, • Provide summary reports, weekly status updates, and support continuous improvement effortsRequired Qualifications, • 3+ years of experience inspecting precision mechanical parts, • Strong ability to read and interpret engineering drawings and GD&T, • Proficient with hand inspection tools (tolerances ≥ .005”), • Comfortable working with digital systems and new software, • Excellent attention to detail and visual inspection skills, • Must pass a background check, • Must be able to work 2nd shift: 2:30 pm-11 pm, • ITAR compliance requiredPreferred Qualifications, • Associate's degree or higher in a related field, or equivalent experience., • Certification in inspection techniques or GD&T is a plus.Mileage reimbursement at the US gov't rate ($0.725 per mile driven).Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. #ZR We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionIndustrial Quality Control Manager (Traveling) Industrial Quality Control Manager (Traveling) Position Overview We are seeking an experienced Industrial Quality Control Manager to lead and manage quality assurance and inspection programs across multiple industrial construction and power generation sites. This traveling role requires a hands-on leader who ensures compliance with industry codes and standards (ASME, NBIC, AISC, AWS), oversees NDE activities, coordinates with contractors and clients, and implements consistent quality systems and continuous improvement practices while documenting results using tools such as Bluebeam. Key Responsibilities • Develop, implement and maintain site quality control and assurance programs to meet client specifications, contract requirements, and applicable codes and standards (ASME, NBIC, AISC, AWS)., • Plan, coordinate and perform inspections, non-destructive examination (NDE) oversight, welding inspections, hydrostatic and pneumatic testing, and final acceptance activities across multiple job sites., • Lead and supervise quality control personnel and third-party inspectors; provide training, mentorship and performance feedback to ensure consistent application of QA/QC procedures., • Conduct internal and supplier audits, evaluate subcontractor performance, and manage corrective and preventive actions to closure., • Review and approve quality documentation, inspection plans, welding procedures, material traceability, NDE reports, test records, and final commissioning documentation. Utilize Bluebeam and other documentation tools to manage drawings, punch lists and inspection reports., • Interface with project management, construction, engineering, and client representatives to resolve quality issues, support technical reviews, and ensure timely resolution of nonconformances., • Ensure adherence to safety policies and regulatory requirements on site; participate in pre-job planning and safety meetings., • Prepare regular quality reports, metrics, and presentations for stakeholders; drive continuous improvement initiatives to increase quality and reduce rework and cost. Qualifications • Bachelors degree in Mechanical Engineering, Metallurgical Engineering, Construction Management or equivalent experience; advanced degree is a plus., • 10+ years of progressive quality assurance/quality control experience in industrial construction or power generation, including hands-on inspection experience in field environments., • Strong working knowledge of codes and standards: ASME (Section I/III/VIII as applicable), NBIC, AISC, AWS and applicable industry standards and specifications., • NDE familiarity with common methods (UT, RT, MT, PT) and relevant certifications (e.g., Level II/III or equivalent) preferred. AWS Certified Welding Inspector (CWI) or equivalent highly desirable., • Proven experience managing welding inspection programs, welding procedure specifications (WPS), procedure qualifications (PQR) and welder qualifications., • Experience with quality management systems (ISO 9001 or equivalent), supplier quality management and audit processes., • Proficiency with Bluebeam or similar markup/document control tools and strong competency with MS Office and quality reporting tools., • Excellent communication, leadership and problem-solving skills with the ability to work independently while traveling frequently to project sites. Valid drivers license and willingness to travel extensively (domestic and potentially international)., • Familiarity with industry-specific safety standards and certifications (OSHA, site-specific safety programs). Benefits Competitive Salary Comprehensive Health Benefits Generous PTO + Holiday Time Off 401(k) Retirement Plan Professional Development Opportunities • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 06/29/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications, and a virtual recruiter as part of the application process. A human recruiter reviews all results. Click here for details on our virtual recruiter . Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

Job DescriptionFounded in 2015, Shield AI is a venture-backed defense-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include Hivemind autonomy software and V-BAT and X-BAT aircraft. With offices and facilities across the U.S., Europe, the Middle East, and Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit www.shield.ai. Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:The Receiving Inspector is responsible for performing inspections on incoming materials, components, and final products to ensure conformance to aerospace industry specifications, customer requirements, and company quality standards. This position helps ensure product quality, compliance with AS9100 and customer requirements, and supports continuous improvement initiatives within the organization.What you'll do: • Perform receiving inspections on incoming materials and components using appropriate tools, gauges, and inspection methods per drawing and specification requirements., • Perform final inspections on completed parts, subassemblies, and products to ensure compliance with customer and engineering requirements before shipment., • Review certifications, test reports, and supplier documentation for compliance with purchase order requirements., • Accurately document inspection results and nonconformances in accordance with company procedures., • Ensure inspection records are complete, organized, and retained per company and AS9100 requirements., • Assist with first article inspections (FAI) per AS9102 requirements as needed., • Maintain and verify the calibration status of inspection equipment used., • Communicate effectively with production, engineering, and supply chain teams regarding nonconforming material and inspection results., • Support and participate in internal and external audits as required., • Maintain a clean and organized inspection area following safety and 5S principles.Required qualifications:, • 3+ years of quality control experience inspecting electrical and mechanical parts in aerospace or precision manufacturing, • High school diploma or equivalent required; technical training or certifications in inspection, quality, or aerospace manufacturing preferred., • Knowledge of GD&T, engineering drawings, and aerospace standards (AS9100, AS9102) required., • Experience using inspection tools such as calipers, micrometers, height gauges, surface plates, and other precision measuring equipment., • Ability to read and interpret blueprints, specifications, and quality documents accurately., • Basic computer skills, including proficiency with MS Office and ERP/MRP systems for recording inspections., • Strong attention to detail, problem-solving skills, and ability to work independently with minimal supervision., • Excellent communication skills, both verbal and written.Preferred qualifications:, • IPC 610, 620 and DO-178, • ASQ Certify Inspector#LI-JM1#LC Full-time regular employee offer package:Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package:Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. ### Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Fantastic new Opportunities in Rockwall/ Dallas area! We are an Aerospace Manaufacturing company and are looking for an experienced Mastercam Operator/ programmer/setup person and also a Surface Plate Inspector. This person will help enhance the productivity of our organization. The successful candidate will perform work quality checks and monitor machine output with the goal to produce high quality parts and materials by performing the right operations. Requirements:  High school diploma/GED required  5+ years of experience using Mastercam required- Mill and Lathe preferred  Must be able to set up and operate Haas 5 th axis CNC mills and multi axis lathes  Understands feeds and speeds for machining.  Has worked in a variety of metals including and not limited to aluminum, steels, plastics, copper, invar/Kovar, Inconel and titanium.  Ability to read and interpret mechanical documents and drawings  Must possess strong basic math skills and mechanical aptitude  Must be able to multi-task and have good problem-solving skills  Must be reliable, dependable, punctual, and maintain good attendance  Ability to effectively communicate in English and to accurately interpret complex written and verbal instructions  Works well with others and has a positive attitude  Team player mentor to other programmers operators  Must be able to stand for an entire shift (8 Hours)  Ability to handle medium to heavy lifting  Must be dependable and have reliable transportation  Must pass drug screen and E-Verify background check Mastercam Programmer/Setup position- $80k+ range salary Surface Plate Inspector- $25/ hour - $40/ hour Mastercam Operator - $25/ hour - $40/ hour Benefits • Health, Dental, and Vision Insurance, • Paid Time Off (up to 80 hours/year), • 6 Paid Holidays, • Monday–Friday schedule | Day shift, • Relocation Reimbursement, • Great Company Culture, • Overtime available *All Inquires are Confidential. Appy Today! Company DescriptionSince 1998, ResourceOne and its Recruiters have been leaders in the recruiting industry. Recruiting coast-to-coast, we offer personalized services to our clients to help find them their next Great Hire by delivering superior candidates like you! We focus on your needs and present real job openings to you that our clients are hiring for that are often times not advertised anywhere else. We keep your interest confidential and work hard to meet your needs for your next career step.Since 1998, ResourceOne and its Recruiters have been leaders in the recruiting industry. Recruiting coast-to-coast, we offer personalized services to our clients to help find them their next Great Hire by delivering superior candidates like you! We focus on your needs and present real job openings to you that our clients are hiring for that are often times not advertised anywhere else. We keep your interest confidential and work hard to meet your needs for your next career step.

Job Description Bilingual QA Inspector - Personal Care Products Manufacturing - HOURLY- Dallas/Fort Worth Area Schedule: Mon - Thu 7am - 5:30pm. Occasionally OT on Fridays or Saturdays. Naturich Labs, Inc., specializes in the formulation and manufacturing of personal care products. With a focus on natural and organic ingredients, Naturich prides itself on developing effective products that are formulated with the latest technology. We can formulate and produce a diverse range of goods, including haircare, skincare, bath & body care, and home goods products, catering to consumers who are conscious about the ingredients that go into their personal care regimen. Naturich is known for its innovative approach to product development, utilizing cutting-edge research to blend traditional raw material science with modern science. Our commitment to quality and customer satisfaction has earned us a loyal customer base and a reputation as a trusted name in the natural personal care industry. Benefits for this position include: Medical, Dental, Vision, Paid Holidays, Paid Time Off, 401k with match, professional development in a high-growth organization, work-life balance, a positive work environment, and much more. Job Overview: The Quality Assurance Inspector will conduct thorough and detailed quality inspections of products during both inbound and outbound processes, identify issues through quality inspections, respond appropriately, and propose improvement solutions. Additionally, this position is responsible for inspecting, testing, and analyzing products, ensuring that issues are resolved through this process. The Quality Assurance Inspector will play a crucial role in maintaining our high standards and meeting customer expectations, while also supporting R&D activities by ensuring product quality parameters are met during pilot runs and product trials. Key Responsibilities: ● Inspection of in-process and finished goods to specification (fill weight, lot code, torque, appearance) per AQL Sampling Chart ● Incoming inspection of components per AQL Sampling Chart ● Perform sanitation check in production and compounding areas ● Line clearance for the packaging process ● Microbial testing (prepare media solutions, plates and test for aerobic plate count and yeast and mold ● Review test data (microbial, actives, torque, fill weight, and approve product for use and/or shipment. ● Support R&D by performing quality inspections on lab scale-ups and pilot batches to ensure alignment with manufacturing standards ● Move finished goods through the Acumatica ERP system. ● Review Production tickets and scan when completed ● Assist in SOP review and internal audits ● Assist in initiating deviation, non-conformance and destruction reports ● Assist in training production personnel Qualifications & Experience: ● High School Diploma or equivalent ● Required 1–2 years in Personal Care or Cosmetics Products Manufacturing and a cGMP environment ● Bilingual English and Spanish required ● Strong written and verbal communications skills ● Demonstrate a team work ethic ● Ability to follow SOP’s and lab safety practices ● Experience with Microsoft word and excel ● Standing for long periods of time ● Walking for long periods of time ● Wearing PPE

Job DescriptionSalary: Depending on experience QA/QC Inspector - Construction (Site Civil) Dallas, TX QA/QC Inspector - Construction (Site Civil) Dallas, TX Full-Time | On-Site | Dallas, TX Why CMTS? Every day at CMTS, our team delivers infrastructure projects that positively impact lives and communities. With over 42 years of industry experience, CMTS has built a strong foundation for continued success, providing project and construction management services to public and private clients nationwide. We value our employees by fostering a culture of learning, professional development, and collaboration. CMTS is committed to maintaining a work environment that emphasizes safety, integrity, and accountability while supporting work-life balance and employee well-being. Our teams are empowered to grow, contribute, and make a meaningful impact through the projects we deliver. About Your Role The QA/QC Inspector ensures site civil construction meets plans, specifications, and quality standards by performing daily inspections of earthwork, utilities, grading, and paving. They verify proper installation, testing, drainage, and ADA compliance, document findings, and track corrective actions. The role also involves coordinating with project teams, reviewing drawings and RFIs, monitoring safety, and supporting project closeout. Education Requirements • High School Diploma What Youll Need to Get the Job Done • 712 years of experience in construction inspection with a strong focus on site civil work., • Experience with public-sector, K-12, or municipal infrastructure projects., • Strong understanding of grading, drainage, utilities, paving, and civil construction practices., • Ability to read and interpret civil drawings, specifications, and survey data., • Knowledge of local, state, and federal regulations related to civil construction., • Strong documentation and reporting skills. What Will Make You Stand Out • Bachelors degree in Construction Management, Civil Engineering, or related field., • Experience with Texas Department of Transportation (TxDOT) or local municipal standards., • Familiarity with SWPPP requirements and stormwater compliance., • Experience working in active school environments or phased construction sites., • Proficiency with digital reporting tools and project management systems. What Youll Do • Perform daily field inspections of site civil work including earthwork, grading, stormwater systems, underground utilities, paving, and site improvements., • Verify construction activities comply with approved drawings, specifications, and contract requirements., • Monitor contractor work for adherence to quality standards, tolerances, and proper installation methods., • Inspect subgrade preparation, compaction, and materials placement to ensure compliance with geotechnical recommendations., • Verify installation and testing of underground utilities including water, sanitary sewer, storm drainage, and associated structures., • Review and confirm proper installation of erosion control and stormwater pollution prevention measures (SWPPP)., • Verify site grading and drainage systems are installed to achieve proper flow and prevent ponding or flooding., • Inspect concrete paving, curbs, sidewalks, and asphalt installations for quality and compliance., • Verify ADA compliance including slopes, ramps, accessible routes, and transitions., • Coordinate with survey teams to confirm layout, elevations, and alignment of site features., • Review and interpret civil drawings, details, and specifications to support field verification., • Document daily inspection reports including work performed, deficiencies, and corrective actions., • Identify and report non-conforming work and track resolution through completion., • Coordinate with Project Managers, APMs, contractors, and testing agencies to resolve field issues., • Verify that required testing and inspections are performed and documented (compaction tests, concrete tests, etc.)., • Participate in pre-installation meetings and coordinate with contractors on upcoming work activities., • Support punch list development and project closeout activities related to site civil scope., • Monitor site safety practices related to excavation, trenching, and heavy equipment operations., • Assist in reviewing RFIs and field changes impacting site civil work. What You Can Expect from CMTS • Opportunities to work on high-impact infrastructure projects across the United States and the U.S. Virgin Islands, • Collaborative and growth-focused team environment, • Competitive compensation, • CMTS LLC offers 100% company-paid medical, dental, vision, 401k, life, and long-term disability insurance coverage for the employee., • Career advancement and professional development opportunities Salary Requirements • Depending on experience Apply Now! www.cmtsllc.com/careers Equal Employment Opportunity CMTS, LLC is an Equal Opportunity Employer that does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, pregnancy, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state, or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment.

Job DescriptionPosition Summary The Quality Control Inspector must own and is responsible for ensuring products meet or exceed established quality standards through inspections, testing, and compliance requirements. This applies to the development, implementation, and continuous improvement of company and product strategies, systems, and processes supporting printed circuit board assemblies (PCBA), sub-assemblies, and finished products within a high-mix, low-to-medium volume contract manufacturing environment. This role plays a critical part in ensuring product quality, manufacturing efficiency, and customer satisfaction across multiple programs and industries. The ideal candidate brings strong hands-on technical expertise, a disciplined approach to problem-solving, and the ability to collaborate effectively with customers, production, quality, and supply chain teams. The main goal is to build quality into the product. Key Responsibilities Quality • Inspect and analyze products to provide adjustments and assessments for improvements., • Maintain accurate records of inspection results so data trends can be established for improvements as well as to mitigate risk., • IPC-610 certification is a requirement., • Knowledge of ISO9001, ISO13485, AS9100 and ITAR are essential and beneficial., • Identify areas for improvement, based on data, and suggest corrective action (CAPA) to improve product or process quality., • Define quality coverage requirements based on customer specifications and manufacturing risk., • Suggest and define quality improvements and tools via Incidents and Opportunities. Manufacturing Support • Inspect and sometimes test products., • Conduct required inspections on material, parts and finished product to identify defects that do not meet Industry, Regulatory or Customer requirements., • Utilize measuring tools wherever needed to ensure design requirements and quality standards., • Identify, reject, and record all defects that do not meet the quality standards and make recommendations for improvement., • Provide hands-on support to production operations, including identifying defects and resolving yield issues., • Ensure quality standards are met for NPIs as well as Production., • Drive root cause analysis and corrective actions (CAPA) for quality-related defects., • Improve quality throughput, coverage, and robustness to support on-time delivery., • Support first article builds, pilot runs, and production ramp activities. Title: Quality Control Inspector Location – Onsite – Farmers Branch, TX Reports to: Quality / Engineering Manager Customer & Program Support • Interface with customers to clarify quality requirements, acceptance criteria, and documentation., • Participate in and provide feedback to improve manufacturability., • Support customer audits, reviews, and technical discussions related to quality. Quality Improvement & Documentation • Establish, maintain quality documentation, and defect data reports., • Drive continuous improvement to reduce cost, cycle time, and escapes., • Support quality initiatives including control plans, and corrective actions. Leadership & Mentorship • Serve as a quality mentor to the production personnel., • Promote quality practices and standardization across platforms and programs. Required Qualifications • High School Diploma or Greater, • 5 to 7 years of Quality Control experience in an EMS / contract manufacturing environment, • Strong knowledge of PCBA inspection and quality methodologies (CAPA, DMR, KPIs, OTD)., • Proficiency reading BOMs, and technical documentation (Assembly Instructions, Customer Specifications, etc.)., • Hands-on troubleshooting experience in a production environment., • Teamwork attitude to enforce quality directives. Preferred Qualifications • IPC-610 certification is a requirement., • Knowledge of ISO9001, ISO13485, AS9100 and ITAR are essential and beneficial., • Experience supporting high-mix, low-volume manufacturing., • Experience with Windows Office, • Exposure to regulated industries (medical, industrial, aerospace, or automotive), • Prior involvement in NPI and Production Product Improvements Title: Quality Control Inspector Location – Onsite – Farmers Branch, TX Reports to: Quality / Engineering Manager Key Competencies • Strong analytical and problem-solving skills., • Attention to detail is a must that encompasses observational skills to identify defects and ensure compliance with quality standards., • Proficient using quality control standards, as well as data analysis software., • Proven QC Inspector with clear technical communication and documentation ability., • Customer-focused mindset with Team approach., • Ability to prioritize and manage multiple programs simultaneously., • Hands-on, action-oriented approach KPIs • Defect Rate (1% to 2%), • First Pass Yield (95% or greater), • Final QC Yield (95% or greater), • Supplier Quality Yield (97% or greater) Working Conditions • Manufacturing floor, • Occasional extended hours to support production needs and customer commitments., • Open to other tasks based upon Manager’s request., • Capable of carrying a maximum of 25 pounds.

Job Description Electrical QA/QC Data Center Inspector $40–$50/hr DOE + Per Diem | Nationwide Travel (~95%) | Base: GA | Direct Hire We are seeking an experienced Electrical QA/QC Data Center Inspector to support mission-critical construction projects across the U.S. This role is responsible for ensuring electrical installations meet strict quality, safety, and compliance standards in high-performance data center environments. Key Responsibilities Perform QA/QC inspections on electrical systems including: • Medium- and low-voltage switchgear, • UPS systems, PDUs, generators, and transformers, • Cable tray, conduit, and grounding systems Verify compliance with: • Project drawings and specifications, • NEC and applicable electrical codes, • Client commissioning standards Additional responsibilities: • Review and track submittals, RFIs, and as-built documentation, • Witness and document electrical testing, including:, • Megger (insulation resistance) testing, • Torque verification, • Pre-functional and functional testing, • Identify deficiencies and ensure timely corrective actions, • Maintain detailed QA/QC reports, logs, and inspection records, • Coordinate with contractors, engineers, and commissioning teamsQualifications, • 3+ years of experience in electrical QA/QC or field inspection, • Strong preference for data center / mission-critical experience (required), • Solid understanding of electrical distribution systems and NEC, • Ability to read and interpret electrical drawings and schematics, • Strong documentation and communication skillsPreferred Certifications, • NICET (Electrical), • OSHA 10 or OSHA 30, • NFPA 70ECompensation & Benefits, • $40–$50/hr DOE + per diem, • Nationwide travel (high-volume project pipeline), • Long-term career growth in the rapidly expanding data center sector, • Exposure to high-profile mission-critical projects, • Competitive benefits package, • INDH Powered by JazzHR krxFZ9BVOB

Job DescriptionFor more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Inspector position in Bastrop, TX on a 6-month contract. The schedule is for the 1st shift (6:00am - 2:30 PM), full-time. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you!Key Responsibilities • Review and validate e-Cert packages for components, subassemblies, and final assemblies, • Verify inspection records, test results, certifications, signatures, and approval workflows, • Identify, document, and communicate discrepancies or nonconformances to Quality and Engineering, • Ensure compliance with drawings, specifications, QMS requirements, and build plans, including traceability, • Perform visual, dimensional, and physical inspections (incoming, in-process, final, and first article), • Conduct surface plate inspections and lot sampling as required, • Use precision tools such as micrometers, calipers, height gauges, dial indicators, and profilometers, • Inspect workmanship issues (burrs, scratches, fasteners, edge distance, damage), • Verify corrective actions and rework completion, • Review shipping documentation and confirm proper packaging and preservation, • Provide summary reports, weekly status updates, and support continuous improvement effortsRequired Qualifications, • 3+ years of experience inspecting precision mechanical parts, • Strong ability to read and interpret engineering drawings and GD&T, • Proficient with hand inspection tools (tolerances ≥ .005”), • Comfortable working with digital systems and new software, • Excellent attention to detail and visual inspection skills, • Must pass a background check, • ITAR compliance requiredPreferred Qualifications, • Associate's degree or higher in a related field, or equivalent experience., • Certification in inspection techniques or GD&T is a plus.Mileage reimbursement at the US gov't rate ($0.725 per mile driven).Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. #ZR We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.