Quality inspector jobs in Santa Ana, CaliforniaCreate job alerts

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Inspection C Job Code: 33987 Job Location: Anaheim, CA Schedule: 9/80 R Job Description: Perform visual, electrical, and assembly-related mechanical in-process inspections, and some final inspections, with as-required supervision, to assure compliance to company and industry specifications. Essential Functions: • Verify previous operations are performed and accepted., • Compare work order/document package to the assembly for correct part number, drawing, revision, as-required approval(s), and Engineering Change Order(s)., • Perform visual inspection of electrical assemblies, including circuit boards, solder joints, cables, transformers to company and industry specifications and standards., • Check physical appearance of parts, sub-assemblies, and assemblies for adherence to established industry workmanship standards, such as damage, solder quality, component orientation, and wiring., • Perform assembly-related mechanical and dimensional inspection using scales, micrometer and calipers., • Perform / verify requirements as outlined in process specifications (for example, fluorescent light examination of conformal coating of circuit boards)., • Support less experienced inspectors, by assisting with informal training that utilize/reference company and industry specifications and standards., • Review records for completeness, as required, including Work Orders, Engineering Changes, Manufacturing Process changes, Material Discrepancy Reports, Rework documentation, test data, etc., • Verify assembly work order test results for completeness and correctness to the test requirements and limits., • Perform assigned surveillance audits., • Perform surveillance/verification of assembly workmanship, equipment calibration, manufacturing process, and test process, and other related duties, as assigned., • Interface, as required, with internal counterparts, in Engineering, Production, Quality Engineering, Manufacturing Engineering, Contracts, and Internal Customers., • Inform the inspection lead and/or lead of production of any assembly problems and generate a non-conformance document., • High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience., • Experience with J-STD-001 and/or IPC-A-610 requirements., • Must be able to interpret/ follow documents such as: Drawings, Procedures, Engineering Change (EOs) Work Orders and Work Instructions., • Ability to work with measurements and math., • Knowledgeable of assembly practices and requirements., • One-year certificate in a quality related field from college or technical school desired. #LI-BR2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

Job Description Overall Purpose: The Final Inspector will inspect all end productions to verify compliance to our specifications as well as customers prior to shipping. Essential Duties & Responsibilities: • Accurately perform visual inspection on all assemblies for workmanship, and dimensional inspection to check for conformance to drawing requirements in Final Inspection area, • Accurately review and execute the additional flow downs listed on shippers per customer requirements, • Perform documented First Article reports as needed (AS9102 forms), • Interface with manufacturing personnel and customers regarding source inspection, quality issues and final inspection results of end products., • Review and document inspection results on process sheets, etc., • Be involved in internal and external auditing, • Assist other areas as needed, including machine shop in process inspection, • Follow quality system procedures, policies and instructions, • Adhere to 5S Standards, • Adhere to all company policies and procedures, including, but not limited to, policies for attendance and punctuality and standards for safety Other Duties: • Other duties based on the needs of the Inspection Department and Quality Department The preceding functions have been provided as examples of the type of work performed by employees assigned to this job classification. Management reserves the right to add, modify, change or rescind work assignments and to make reasonable accommodations as needed. Qualification Requirements: • High School education or equivalent, • 2+ years of experience in inspection, preferably in a manufacturing environment, • Strong math background, • Must possess basic computer skills, • Must be proficient in the use of basic measuring tools such as micrometers, calipers, height gages, depth mics, comparators, etc., • Ability to read and understand blueprints, drawings and other documented specifications, • Fluent in English (able to read, speak, write and understand), • Have legible handwriting, • Must be a US Person (US Citizen or Permanent Resident) Physical Demands: o Use hands and fingers to handle, type or feel o Reach with hands and arms o Speak or hear o Walk o Lift up to 30 pounds o Cannot be colorblind Work Environment: Warehouse environment Must be US Persons based on ITAR definition (US Citizen or Permanent Resident). * This position is expected to be exposed to information which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All Applicants must be U.S. persons within the meaning of U.S. regulations. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Hydraflow provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard because of any one, or combination of any one or more protected characteristics including race, color, religion, creed, age, sex, gender, gender identity, gender expression, pregnancy, medical condition, genetic information, sexual orientation, national origin or ancestry, citizenship, marital status, physical or mental disability, military or veteran status, victims as well as those who have a family member that is a victim of any qualifying act of violence, those who are perceived to have a combination of protected characteristics or are perceived as being associated with a person who has these characteristics or any other basis protected by law This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Company DescriptionHydraflow provides fluid transfer solutions that reduce customer's installation time, waste, weight and life-cycle costs. In addition we couple our highly innovative and differentiated products with a culture of service and quality, giving our customer the competitive advantage to succeed in their business.Hydraflow provides fluid transfer solutions that reduce customer's installation time, waste, weight and life-cycle costs. In addition we couple our highly innovative and differentiated products with a culture of service and quality, giving our customer the competitive advantage to succeed in their business.

Job DescriptionPOSITION SUMMARY: The primary responsibility of the Certified Non-Destruct Test Technician Level 2 is to test and inspect parts and assemblies for defects using automated and manual methods and techniques including radiography, ultrasound, penetrant, eddy current, laser shearography and magnetic particle. ESSENTIAL DUTIES & RESPONSIBILITIES: Essential functions are the core duties or tasks that the employee will perform. List the duties that are central to performing the most basic functions of the job. • Adherence to safety procedures/guidelines at all times., • Maintain safety precautions at all times., • Keep work area in a clean and orderly condition., • Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results., • Perform NDT Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication., • Familiar with the tools and equipment and shall have demonstrated proficiency in their use., • Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved., • Capable of assisting production in the set-up of material and/or components for receipt inspection, as required., • Train other individuals as required by management. PHYSICAL DEMANDS & ABILITIES: • Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart., • Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds., • May work alone with minimal supervision or with other personnel., • Inspection personnel shall possess fundamental written and verbal communication skills., • Inspection personnel shall be fluent (written and verbal) in the English language., • Computer skills, especially familiarity with MS Office applications, are necessary., • Comfortable working in fast paced team environment. SUPPORTS: Quality Control Manager, Shop Managers, Production Supervisors, Product Line Managers. REQUIRED EDUCATION: Required: High School diploma or equivalent with at least 2 years of inspection related experience. Preferred: 2 years of inspection related experience. MINIMUM AND PREFERRED QUALIFICATIONS: • Must be qualified to be certified as a Level 2 to NAS 410 in one or more of the following NDT Methods that will be utilized:, • Fluorescent Penetrant Inspection (FPI)., • Magnetic Particle Inspection (MPI)., • Certified Level 2 Magnetic Particle Inspector is a MUST., • Ability to communicate, read, and understand English., • Ability to read blue prints/drawings, • Ability to follow precise instructions., • Ability to work around hazardous chemicals., • Must have excellent hand/eye coordination., • Ability to work well with others as part of a team., • Able to multi-task and open to working overtime. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Job Description Autonomous Medical Devices Incorporated (AMDI) is a California-based company employing a world class team of engineers, scientists, clinicians, manufacturing and quality/regulatory experts dedicated to the development and manufacture of best in class diagnostic devices using innovative technology, factory automation, and cloud connectivity. AMDI is headquartered in Santa Ana, CA where it manufactures the Fast PCR Mini Respiratory Panel in an ISO:13485 / MDSAP certified 110,000 square foot facility. Summary of Position Are you a detail-driven professional with a passion for quality? We are seeking a Senior Quality Inspector to join our team! As a key member of the Quality team, you will play a critical role in ensuring that our products meet the highest standards of safety, effectiveness, and compliance. The Senior QC Inspector will be a hands on individual that will perform inspection and testing of incoming materials, in-process samples and finished products to ensure the materials and products conform to specifications and requirements. Communicate with team and management promptly on quality related issues. Initiate Non-conformance Report (NCR) and assist with the calibration and preventive maintenance program of equipment/instruments. Location: This is an onsite position located at our Santa Ana, CA office. Candidates living within a 25 mile range preferred. Essential Duties and Responsibilities • Perform visual, dimensional, and functional inspections and/or testing across all components, subassemblies and finished medical device products using all applicable tools and equipment to ensure conformance with design specifications., • Archiving receiving inspection and other QC records in Oracle PLM., • Perform job functions in compliance with established work instructions and adherence with SOPs, including recording traceable information on device history records., • Ensuring all necessary samples are pulled and tested per procedures requirement., • Determine acceptability and/or identify defective raw materials and finished products following established procedures and specifications., • Provide immediate feedback to production line and immediate leadership on all quality related problems., • Support the calibration and preventive maintenance program., • Initiate Non-conformance Report (NCR) as needed., • Additional projects and/or duties as assigned Qualifications Required for Position • High school Diploma or equivalent required. Associate degree or higher preferred., • A minimum of 8 years of inspection and testing experience in GMP environment, preferably in the medical device or pharmaceutical industries, is required., • Proficient in a wide range of dimensional inspection techniques/equipment (caliper, micrometer, drop indicator, pin gauge, CMM, Keyence, optical inspection system) with good hand eye coordination and high manual dexterity., • Contribute to and support the development of accurate and rugged inspection procedures., • Able to clearly describe and convey nonconformance issues., • Experienced in a fast-paced environment and able to balance and prioritize workload to support production schedule., • Ability to train others in methodology and procedures., • Ability to serve as a role model to other workers/colleagues in proper execution of day-to-day inspection duties as well as a guide in the understanding of operations and quality standards., • Proficient computer skills in Microsoft Office Excel and Word, manufacturing software, QMS software, etc., • Must be hands on and ability to as needed perform physical work pertaining to inspection, • Tech-savvy and able to learn new software quickly., • Ability to gets things done without perfect resources, is innovative, and works with a sense of urgency., • Ability to be flexible and willing to do what it takes to support company and department goals., • Results oriented – drives progress & excellence., • Ability to work independently with minimal supervision., • Effective interpersonal and communication skills., • Well organized and attentive to details., • Contributes to a collaborative and inclusive work environment., • An individual with high standards, takes ownership, and is invested in the outcome, is perferred., • Ability to be proactively helps others, stays positive and has a good sense of humor. Work Environment • The QC Inspector will work in the QC Lab, and will go to the warehouse and production floor from time to time., • While performing the duties of this job, the employee frequently is required to use hands to handle or feel and reach with hands and arms., • The employee is occasionally required to stand and walk or bend and twist. The estimated base salary range for this position is $22.00 - $32.00 hourly. If the level of the role changes during the hiring process, the applicable base pay range may be updated accordingly. The actual base salary offered will be determined by several factors, including, but not limited to, the applicant's qualifications for the position, years of relevant experience, distinctive skills, and level of education attained. Autonomous Medical Device Incorporated offers a comprehensive compensation and benefits package to eligible employees including: • Company provided lunch to all employees when working at one of AMDI’s on-site locations., • 401(k) match, • Health insurance, 100% paid for by employer including: Medical, Dental, Vision & Life Insurance, • Competitive vacation, sick days & paid holidays, • Tuition reimbursement, • Casual dress code, • Employee discounts on activities such as theme parks, movie theaters, hotels, rental cars, etc., • Monthly company-wide socials and activities Autonomous Medical Devices Incorporated (AMDI) will not accept unsolicited resumes from any source other than directly from a candidate. An Agency must obtain advance written approval from AMDI’s internal Human Resources team to submit resumes only in conjunction with approved valid fully executed contracts. Our commitment to an inclusive workplace: We are an equal opportunity employer and encourage people from all backgrounds to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status, or any other protected characteristic under federal, state, or local law. RBbYkZ5XDz

Job DescriptionQC Inspector Job Title: QC Inspector Location: Anaheim, CA Hourly Rate: $28.00 - $40.00 Position Summary: We are seeking an experienced Quality Control Inspector with a strong aerospace background. This role inspects incoming sheet metal parts, machined components, and raw materials, reviews Certificates of Conformance (CofCs), and performs final shipping inspection for aerospace customers and outside process vendors. The ideal candidate will have experience operating portable Romer arm CMMs; programming experience is not required. If that sounds like you, please apply. Responsibilities: • Receive aerospace sheet metal and machined parts, verify counts, and perform various inspections., • Perform dimensional and visual inspections to AS9100 and customer specifications using calipers, micrometers, height gauges, and thread gauges., • Verify supplier CofCs, material certifications, and other aerospace quality documents., • Inspect completed aerospace components before shipment to customers and vendors. Package per aerospace packaging standards (Boeing D6-51991, Lockheed Martin)., • Operate Romer and Hexagon portable CMM arms (required)., • Create AS9102 First Article Inspection Reports (FAIRs) and other quality documentation., • Follow ITAR/EAR export control requirements for aerospace parts., • 3+ years of experience in aerospace quality inspection, shipping, and receiving., • Strong knowledge of AS9100 quality standards., • Experience operating a Romer CMM arm., • Ability to read and interpret aerospace blueprints, drawings, and specifications., • Skilled in inspection tools: calipers, micrometers, height gauges, thread gauges., • Health insurance., • Dental insurance., • Paid time off., • Paid holidays., • 401k offerings., • & other great benefits! - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. CyberCoders will consider for Employment in the City of Los Angeles qualified Applicants with Criminal Histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring (Ban the Box) Ordinance.This job was first posted by CyberCoders on 02/25/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description For more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Cable & Harness Inspector position in Southern California. Primarily in the LA and OC areas. The schedule is on first shift, full-time, 4-5 days per week on an as-needed basis. If you have a passion for cable harnesses and a keen eye for quality, this could be the perfect opportunity for you! Key Responsibilities • Perform first-article, in-process, and final inspections at one or more client suppliers, • Ensure products meet quality and specification standards, • Verify safety wire orientation, correct turns, and pigtails as per specifications, • Confirm shipping documentation is legible and accurate (part number, serial number, etc.), • Check documentation packages to industry standards and classify defects, • Interpret manufacturing drawings and identifying non-conformances, • Periodically verify accuracy and ensure productivity to meet production schedules, • Maintain equipment and keep the work area organized Required Qualifications • Knowledge of cable and harness assembly methods, • Familiar with IPC-A-620 standards, • Familiar with IPC-A-610 standards, • Minimum 3 years of experience as a Cable and Harness Inspector/Assembler in electronic manufacturing or related fields, • Ability to read schematics, assembly drawings, and identify wiring components, • Proficient in documenting Certificates of Conformance (COC), • Strong organizational, communication, and software adaptation skills Preferred Qualifications • Certified or previously certified in IPC-A-620 or IPC-A-610, • Diploma or GED from an accredited high school or technical school; college degree in engineering, • Knowledge of electronic contract manufacturing and LEAN manufacturing, • Preferred: 5 years of experience, with 2 years as a Cable and Harness Inspector 50% hourly rate for any travel time ("p2p") Mileage reimbursement at the US gov't rate ($0.72 per mile driven). Untaxed. Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role.

Job Description QC Inspector Job Description Join a leading company in the aerospace industry that specializes in manufacturing fiber optic connectors and cable harnesses. We are seeking a dedicated 1st shift Inspector with a minimum of six months of mechanical inspection experience. Responsibilities • Perform dimensional inspection of parts and sub-assemblies., • Work with tolerances of +/- .005., • Analyze engineering drawings, blueprints, customer specifications, planning documents, and requirements to determine the inspection process., • Inspect parts using measuring tools such as micrometers and calipers to ensure conformance to specifications., • Utilize pin gauges and thread gauges in inspections., • At least 1+ year of inspection experience within a machine shop setting., • Experience in quality control, quality assurance, and quality inspection., • Proficiency with micrometers, calipers, thread gauges, and pin gauges., • Ability to read and interpret blueprints and technical documents., • Experience in the aerospace or mechanical industries., • Experience with aluminum machine parts is preferable., • Bilingual in Vietnamese is preferred. We offer comprehensive medical, dental, and vision benefits, including Anthem, Cigna, and Vision plans. Employees enjoy zero-cost vision coverage, optional life and AD&D insurance, paid sick leave, holidays, and vacation. Additionally, there is a profit-sharing program available after one year of employment. Work Environment This role is based in a clean and well-maintained aerospace manufacturing environment, employing over 150 staff members. The position requires working within an ITAR environment, with a shift schedule from Monday to Friday, 6am to 4:30pm, and Saturdays from 6am to noon, totaling 56 hours per week. Closed-toe shoes are mandatory, though steel-toe shoes are not required. Job Type & Location This is a Contract to Hire position based out of Anaheim, CA. Pay and Benefits The pay range for this position is $20.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Anaheim,CA. Application Deadline This position is anticipated to close on Apr 10, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We are a CNC Aerospace manufacturing company located in the City of Fountain Valley, CA, currently seeking a skilled Quality Control Inspector to join our team. The ideal candidate will play a key role in performing inspection functions to verify product conforms to specification, spec, tight-tolerance machined components, etc. This individual must demonstrate strong problem-solving skills, knowledge or some knowledge of using the absolute arm 7 axis (Hexagon brand) Veri surf and uphold excellent attendance and punctuality. tight-tolerance machined components. (our current inspector will be willing to help train using the arm if not to familiar) Key Responsibilities: • Performs and documents variety of inspections thru the day and sampling procedures., • Assists and supports QA/QC Management documents., • Maintain quality records, reports, logs, and retention samples., • High school diploma or GED minimum., • Bilingual (English/Spanish), • 5-8 years of relevant work experience required., • General proficiency in using Microsoft Word, Excel, Veri surf. To Apply: Please send your resume for consideration to Schedule & Pay rate: Pay Rate: $35-39.00/hr (DOE) Schedule: Mon-Fri 1st shift 6:00am – 4:30pm (10 hrs) Company DescriptionManufacturing Mill fixture, Jigs, ASSY for all Aerospace companies, Flying and Ground support for the Space.Manufacturing Mill fixture, Jigs, ASSY for all Aerospace companies, Flying and Ground support for the Space.

Job Description AS9100 Aerospace Quality Inspector (Faro / Hexagon CMM / Verisurf) ABC Sheet Metal / Steeldyne Industries – Anaheim, CA ABC Sheet Metal / Steeldyne Industries is an AS9100D-certified aerospace manufacturer seeking an experienced Quality Control Inspector for in-process and final inspection of welded, fabricated, and machined assemblies. Compensation: $38 – $50 per hour, based on experience and qualifications Required Experience (Non-Negotiable): * Aerospace manufacturing environment (AS9100) * AWS welding inspection experience * Experience with Faro or Hexagon CMM Arm * Experience using Verisurf software * Ability to read and interpret engineering drawings and specifications Responsibilities: * Perform in-process and final inspections * Create AS9102 First Article Inspection (FAI) reports * Generate ballooned drawings and inspection documentation * Operate Faro / Hexagon CMM arm using Verisurf * Use precision measuring tools (calipers, micrometers, height gauges, etc.) * Identify and document nonconforming conditions * Conduct process audits and support AS9100/customer audits * Perform supplier source inspections as required * Assist with calibration of inspection equipment Qualifications: * 3+ years aerospace quality inspection experience * Experience working within an AS9100 quality system * Associate degree, trade school, military training, or equivalent experience * Experience with fastener installation and inspection * Strong communication and attention to detail * Strong computer skills, including: * Email and communication tools * Microsoft Office 365 (Outlook, Word, Excel) * Ability to work with CAD drawings and digital inspection data * Ability to work independently and in a team environment Preferred: * ASQ or AWS certification Work Environment: * Aerospace manufacturing environment * Hands-on inspection role using CMM arms and precision instruments * Overtime may be required Company DescriptionSteeldyne Industries / ABC Sheet Metal is an AS9100 aerospace and ITAR certified facility. It is one of the most diversified metal fabrication companies in Southern California. We are a full service quality-oriented manufacturing company serving over 3000 customers with a wide range of applications, from precision sheet metal to heavy plate. Our talented sheet metal engineers and skilled craftsmen work together to provide high quality custom metal products. Servicing OEM's and end-users in the following industries: Aerospace Medical Defense Packaging Building Materials & Construction Electrical Equipment & Electronics Commercial Display Oil & Gas Transportation Heating & Cooling Industries / ABC Sheet Metal is an AS9100 aerospace and ITAR certified facility. It is one of the most diversified metal fabrication companies in Southern California. We are a full service quality-oriented manufacturing company serving over 3000 customers with a wide range of applications, from precision sheet metal to heavy plate. Our talented sheet metal engineers and skilled craftsmen work together to provide high quality custom metal products.\r\n\r\nServicing OEM's and end-users in the following industries:\r\n Aerospace\r\n Medical\r\n Defense\r\n Packaging\r\n Building Materials & Construction\r\n Electrical Equipment & Electronics\r\nCommercial Display\r\n Oil & Gas\r\n Transportation\r\n Heating & Cooling\r\n\r\n\r\n

Job Description For nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors. We’re hiring for a Level 2 Electro-Mechanical Inspector Level 2 position in Southern California. This is an opportunity in which you will be supporting the first shift. This is a full-time position. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you! Key Responsibilities: • Incoming inspection from external providers of products or services/processing (e.g, nickel plating), • In-process and/or final inspection of critical features, including witness inspection (e.g., CMM program run), • Compilation of final inspection sign-off sheet or inspection package, • Verification that the inspection equipment used to take measurements is capable of detecting defects., • Verification that the inspection methodology is adequate per drawing intent., • Review and validation of justification for any part not inspected at final inspection., • Audit and validation of execution of the inspection plan, if applicable, • Assure products are free of gaps, mismatches, fairing, and of acceptable contour and waviness., • Assure products are of good workmanship and within specified workmanship standards (e.g., oil canning, riding conditions, loose fasteners, drill starts, scratches, dings, burrs, fastener edge distance, etc.), • Verify all visible part finishes, paint, and skin quality are acceptable to the required visual standards., • Verify hardware cleanliness and absence of internal or external foreign object debris., • Verify safety wire has been applied in a negative pull orientation, the correct number of turns, and pigtails are tucked in according to specification requirements., • 3+ years of hands-on experience with electro-mechanical parts inspection., • Strong ability to read and interpret manufacturing drawings and industry/commodity standards., • Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., micrometers, calipers, height gauges)., • Ability to adapt to new technology and software., • Excellent visual acuity to detect defects in complex products., • Must be willing to undergo a background check., • Must be ITAR compliant. 50% hourly rate for any travel time ("p2p") Mileage reimbursement at the US gov't rate ($0.70 per mile driven). Untaxed. SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. Must be ITAR compliant and must be willing to undergo a background check.

Job Description URGENT need for multiple quality roles! Evaluation Hire! Interviewing NOW!!! Quality Technician - Plastic Manufacturing - Garden Grove, CA $20 - $25/hr Quality Inspector - Machine Shop - Garden Grove, CA $20+/hr DOE Quality Inspector - RF - Cypress, CA $33+/hr DOE Quality Engineer - Machine Shop - Garden Grove, CA $80k - $110k/yr DOE How to Apply: Choose from one of the following application methods: · Email your resume to · Call our office at (866) 949-4894 · Submit your online application at · Visit our office at 7077 Orangewood Ave., Suite 128, Garden Grove, CA 92841 About Us: Express works with job seekers to help find the right job for their skills and experience. As one of the leading staffing companies in North America, we’re ready to help you take the next step in your career. Whether you are ready for a full-time position, looking for part-time work, or want a more flexible schedule, Express has a wide range of jobs available including: · Administrative · Light Industrial · Skilled Trades · Professional positions We are an equal opportunity employer and value diversity, fostering an inclusive workplace for all. Our hiring decisions are based on merit, and we do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or genetic information. Company DescriptionExpress Employment Professionals is a leading staffing agency in the U.S., specializing in matching job seekers with the best jobs for their skills and experience. We offer a wide range of employment opportunities, including full-time jobs, part-time positions, and temporary roles. For employers, Express provides customized staffing solutions to help overcome recruiting challenges, manage production fluctuations, handle changes in project scope, and navigate seasonal hiring needs. Our expert staffing services are designed to meet the unique workforce requirements and ensure the success of businesses throughout our community. Express works with job seekers to help find the right job for their skills and experience. As one of the leading staffing companies in North America, we’re ready to help you take the next step in your career. Whether you are ready for a full-time position, looking for part-time work, or want a more flexible schedule, Express has a wide range of jobs available including: Administrative Light Industrial Skilled Trades Professional positions We are an equal opportunity employer and value diversity, fostering an inclusive workplace for all. Our hiring decisions are based on merit, and we do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or genetic information.Express Employment Professionals is a leading staffing agency in the U.S., specializing in matching job seekers with the best jobs for their skills and experience. We offer a wide range of employment opportunities, including full-time jobs, part-time positions, and temporary roles.\r\n\r\nFor employers, Express provides customized staffing solutions to help overcome recruiting challenges, manage production fluctuations, handle changes in project scope, and navigate seasonal hiring needs. Our expert staffing services are designed to meet the unique workforce requirements and ensure the success of businesses throughout our community.\r\n\r\nExpress works with job seekers to help find the right job for their skills and experience. As one of the leading staffing companies in North America, we’re ready to help you take the next step in your career. Whether you are ready for a full-time position, looking for part-time work, or want a more flexible schedule, Express has a wide range of jobs available including: \r\n\r\nAdministrative\r\nLight Industrial\r\nSkilled Trades\r\nProfessional positions\r\n\r\nWe are an equal opportunity employer and value diversity, fostering an inclusive workplace for all. Our hiring decisions are based on merit, and we do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or genetic information.

Job Description Quality Inspector Position Summary We are seeking a Quality Inspector to perform inspection activities on purchased and manufactured parts, assemblies, and final deliverable units. This role requires the ability to interpret engineering drawings, perform First Article Inspections (FAI) using AS9102, document nonconformances, and use CMM and standard inspection equipment to ensure product compliance. Schedule: 6am-2:30 PM w/ OT, including some Saturdays. Pay: up to $27/hr Key Responsibilities • Perform receiving, in-process, final, and shipping inspections, • Create First Article Inspections (FAI) using AS9102 forms, • Inspect complex parts using CMMs and precision measuring equipment, • Interpret engineering drawings, process specifications, and customer requirements, • Document nonconforming material through NCRs and support disposition, • Maintain inspection records and scan quality documentation into the ERP system, • Support calibration activities by managing inspection equipment and coordinating recalibration, • Work closely with manufacturing, quality, and external calibration providers, • Train to become an FAA ODA unit member (as required) Qualifications • High school diploma or equivalent, • Minimum of 2 years of inspection, machinist, or technician experience, • Experience with GD&T, • Proficiency using precision measuring tools (micrometers, calipers, pin gauges, CMM, Romer Arm, etc.), • Strong written and verbal communication skills, • Experience in a calibration environment preferred Physical Requirements & Work Environment • Ability to lift up to 35 lbs occasionally, • Combination office and manufacturing floor environment, • Moderate noise levelCompany DescriptionMarquee Staffing has built a reputation on expert local market knowledge, unparalleled personalized service and the ability to deliver winning candidates and job opportunities. Marquee operates offices located conveniently throughout Southern California. Each branch is full-service, providing temporary, contract, contract-to-hire and direct placement services for a diverse set of clients. Each branch has recruiters who specialize in key industries, ensuring that our clients get the best match possible for each open position and that our candidates get expert guidance in their career path. Apply with us today!Marquee Staffing has built a reputation on expert local market knowledge, unparalleled personalized service and the ability to deliver winning candidates and job opportunities.\r\n\r\nMarquee operates offices located conveniently throughout Southern California. Each branch is full-service, providing temporary, contract, contract-to-hire and direct placement services for a diverse set of clients. Each branch has recruiters who specialize in key industries, ensuring that our clients get the best match possible for each open position and that our candidates get expert guidance in their career path.\r\n\r\nApply with us today!

Job Description IMMEDIATE job opportunity for a driven individual who has a proven track record of performance and desire to work for a well-established organization. We are looking for an experienced CMM Programmer / Quality Inspector for specialized manufacturer of precision, near-net-shape aluminum forgings and machined components, primarily serving the aerospace, defense, and commercial aircraft industries located in Orange, CA. The successful candidate will bring 5+ years of hands-on experience in CMM and Romer arm inspection/programming, a deep understanding of GD&T, and a sharp eye for quality within a regulated manufacturing environment. ESSENTIAL FUNCTIONS: (include but are not limited to) Perform dimensional inspections of forged and machined aerospace components using CMMs and portable Romer arms. Program and troubleshoot inspection routines using PC-DMIS or equivalent CMM software. Operate and program Romer/FARO arms for mobile measurement, in-process verification, and reverse engineering. Interpret aerospace engineering drawings, 3D CAD models, and technical specifications with precision. Conduct First Article Inspections (FAIs) per AS9102, along with in-process and final inspections. Identify, document, and report nonconformances; generate NCRs and assist in root cause analysis and corrective/preventive actions (CAPA). Maintain calibration status and traceability of inspection equipment per AS9100D standards. Work closely with Quality Engineers, Machinists, and Production teams to resolve quality issues and support continuous improvement. Support internal and customer audits; provide detailed inspection records and reports upon request Complete all applicable inspection documentation, including first article inspection reports and daily inspection logs. Move Work Orders in the production system (Flex) upon inspection completion. Promptly report non-conformances, equipment issues, or safety concerns to the Quality Manager or designee. Actively support ISO 9001 and AS9100 compliance efforts and internal audits. Participate in continuous improvement initiatives, including 5S practices. QUALIFICATIONS 5+ years of experience in aerospace quality inspection, including forging and machining environments. Proficiency in CMM operation and programming (PC-DMIS or equivalent). Experience using and programming Romer or FARO arms. Expert knowledge of GD&T (ASME Y14.5) and blueprint interpretation. Familiarity with AS9100D, ISO 9001, and AS9102 FAI requirements. Skilled in using standard metrology tools (micrometers, calipers, height gauges, etc.). Strong computer skills: MS Office Suite, quality management software, and data reporting tools. Excellent communication, documentation, and problem-solving skills. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). Compensation: $30 - $35 hr. If qualified and interested in the position, please email your resume relating your skills, background, and experience to the job opening. CitiStaff 1111 W. Town & Country Rd Ste 29, Orange, CA 92868 Our client is looking to hire the right candidate as soon as possible, time is of the essence. Company DescriptionCitiStaff Solutions, Inc.CitiStaff Solutions, Inc.

Job Description A nationally recognized medical diagnostics manufacturer specializing in the research, development, and manufacturing of rapid molecular PCR diagnostic devices is seeking an experienced Senior Quality Control Inspector to support its regulated manufacturing operations in Southern California. This role plays a critical part in ensuring product quality, regulatory compliance, and patient safety within an FDA-regulated, ISO 13485-certified medical device environment. The Sr. QC Inspector will: • Perform incoming, in-process, and final inspections in accordance with FDA Quality System Regulation (21 CFR Part 820), ISO 13485, and internal quality system requirements., • Execute visual, dimensional, and functional inspections of raw materials, components, subassemblies, and finished medical devices to ensure conformance with approved specifications, drawings, and acceptance criteria., • Utilize a broad range of inspection tools and systems including calipers, micrometers, indicators, pin gauges, CMM, Keyence, and optical inspection systems., • Identify, document, and clearly communicate nonconformances, initiating Non-Conformance Reports (NCRs) in compliance with internal CAPA and deviation procedures., • Support investigations by providing inspection data and contributing to root cause analysis and corrective actions as required., • Maintain accurate, complete, and traceable quality records, including Device History Records (DHRs) and receiving inspection documentation, in Oracle PLM and related quality systems., • Ensure compliance with SOPs, work instructions, GMP requirements, and data integrity principles (ALCOA)., • Support and participate in calibration and preventive maintenance programs for inspection equipment in accordance with regulatory and internal requirements., • Assist with training and mentoring QC personnel on inspection techniques, quality procedures, and regulatory expectations., • Support internal and external FDA, ISO, and customer audits as needed. Required Qualifications • High School Diploma or equivalent required; Associate degree or higher preferred., • Minimum of 5 years of Quality Control inspection experience in an FDA-regulated medical device or pharmaceutical manufacturing environment., • Demonstrated working knowledge of 21 CFR Part 820, ISO 13485, and GMP requirements., • Strong proficiency with dimensional inspection methods and equipment; experience interpreting engineering drawings, GD&T, and specifications preferred., • Proven ability to accurately document, investigate, and communicate quality issues and nonconformances., • Experience training others in inspection methodologies and quality system procedures., • Proficient in Microsoft Office (Excel, Word), manufacturing systems, and QMS software., • Highly detail-oriented, well organized, and capable of working independently with minimal supervision., • Strong interpersonal and written/verbal communication skills.

Signia Aerospace is a global, integrated provider of high-performance systems and specialized components for the aerospace industry.Signia currently operates two complementary business segments: Thermal Management (key brands include ACE Thermal Systems and Mezzo Technologies) and Mission Systems (k

Position Overview AEG is seeking a motivated Environmental Health & Safety (EHS) Technician / Industrial Hygienist to support a variety of field-based industrial hygiene and environmental health projects. This is a role ideal for candidates who enjoy hands-on field work, diverse project sites, and working directly with clients and project teams. Key Responsibilities • Conduct industrial hygiene field activities including:, • Air, noise, and vapor sampling, • Asbestos, lead, mold, and other hazardous materials assessments, • Indoor air quality (IAQ) investigations, • Perform EHS inspections and compliance assessments at industrial and commercial facilities, • Set up, calibrate, and maintain sampling equipment, • Accurately document field observations, sampling data, and chain-of-custody records, • Assist with data interpretation and preparation of technical reports, • Communicate effectively with project managers, clients, and site personnel, • Travel frequently to project sites (often multi-day assignments), • Associate’s or Bachelor’s degree in Industrial Hygiene, Environmental Science, Occupational Health & Safety, or a related field (or equivalent field experience), • 1–5+ years of relevant EHS or industrial hygiene field experience preferred, • Working knowledge of OSHA regulations and basic industrial hygiene principles, • Experience with field sampling equipment and data collection, • Strong attention to detail and technical documentation skills, • Ability to work independently in field environments, • Willingness and ability to travel extensively, • Industrial Hygienist in Training (IHIT), • Asbestos Inspector, Air Sampling Professional, or Project Monitor, • Lead Inspector / Risk Assessor, • Ability to lift and carry sampling equipment, • Ability to work in industrial environments, including confined spaces and varying weather conditions, • Competitive salary based on experience, • Travel expenses fully covered (lodging, per diem, mileage/airfare), • Overtime opportunities, • Health, dental, and vision insurance, • Paid time off and holidays, • Advanced Environmental Group Inc. is an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive environment for all employees.

GROW WITH US: Tandem Diabetes Care creates new possibilities for people living with diabetes, their loved ones, and their healthcare providers through a positively different experience. We'd love for you to team up with us to "innovate every day," put "people first," and take the "no-shortcuts" approach that has propelled us to become a leader in the diabetes technology industry. STAY AWESOME: Tandem Diabetes Care is proud to manufacture and sell the Tandem Mobi system and t:slim X2 insulin pump with Control-IQ+ technology - an advanced predictive algorithm that automates insulin delivery. But we're so much more than that. Our company's human-centered approach to design, development, and support delivers innovative products and services for people who use insulin. Because many of our own team members live with diabetes, or have a loved one impacted by diabetes, the work is personal, and we are committed to the cause. Learn more at ___ A DAY IN THE LIFE: Performs inspections and testing on raw materials and sub-assemblies to identify non-conforming material and product and may assist in evaluation of non-conformances. Performs routine and non-routine testing of sub-assemblies and finished product with limited supervision according to material and product specifications, following Standard Operation Procedures (SOPs) and Work Instructions (WIs). Compiles data for evaluation of department Key Process Indicators (KPIs). Assists with validating inspection and testing processes. Quality Control Inspector II's at Tandem are also responsible for: • Performs dimensional inspections on raw materials and incoming components., • Performs testing on prototype and production product to support Product Development, Quality, and Manufacturing Technology engineers., • Performs testing using an automated vertical tension and compression machine., • Performs flow testing using various flow measurement and pressure systems., • Develops and maintains lab apparatus and test methods., • Maintains performance and calibration of lab equipment., • Prepares sample product for testing and maintains proper documentation for product traceability., • Assists in ordering lab supplies, standards, solvents and tracking inventory., • Works with Product Development and Quality engineers to improve existing testing methodologies and SOPs to increase lab efficiency., • Properly documents all work on appropriate forms as required by test protocols and SOPs., • Utilizes and maintains a laboratory notebook., • Complies with safety and operating policies and procedures regarding equipment, materials, and the finished product., • Tests components, in-process, and finished product independently following established SOPs and WIs., • Performs quality material and product measuring, testing and release using established SOPs and WIs., • Interprets engineering specifications and drawings and performs inspections, product segregation and verification., • Maintains department documentation, inventory of measurement equipment, and ensures calibration and preventive maintenance records for inspection equipment are current., • Performs preventive maintenance on equipment, as required., • Performs set-up/preparation of equipment, cleaning, changeover of lines and general housekeeping., • Maintains a safe work environment; thoroughly reads and understands the material safety data sheets (SDS) for proper handling of materials, follow operating and maintenance instructions for tools and machinery, and utilizes relevant manuals for proper operating procedures., • Performs verification and validation activities in accordance with company QMS, ISO, and FDA standards., • Understands and applies GDP, GLP, and GMP., • Ensures work is performed in compliance with company policies including Privacy/HIPAA and other regulatory, legal, and safety requirements., • Performs other assignments or projects as directed. WHEN & WHERE YOU'LL WORK: Onsite: This position is fully onsite and open to candidates located in Irvine, California. Equipment for the role will be provided and training will occur onsite. Schedule: This position will work Monday - Friday from 8:00 AM - 5:00 PM PST. WHAT YOU'LL NEED: Knowledge, skills & abilities: * Knowledgeable with QSRs. * Must have strong cGMP documentation skills. * Working knowledge of small scale electromechanical device assembly operation, * Ability to effectively share information regarding issues in written or verbal form and making recommendations in a clear and concise manner. * Skilled at promoting team cooperation and a commitment to team success. * Demonstrated ability to effectively prioritize and handle multiple priorities and complete assignments on time and with minimal errors. * Proficient with Microsoft Office and Internet. Minimum certifications/educational level: • HS Diploma or equivalent required, with some post high school technical training preferred. Minimum experience: • 4+ years relevant QC Inspection experience, preferably in an FDA regulated industry., • Experience with QSRs and cGMP including basic knowledge of QC systems., • Experience utilizing sampling methodologies and tools., • Experience measuring materials with visual inspection systems., • Experience with medical device consumer products a plus. COMPENSATION: The starting base pay range for this position is $27.00 - $30.00 per hour. Base pay will vary based on job-related knowledge, skills, experience and may also fluctuate depending on candidate's location and the overall job market. Please note that is a temporary position. As a temporary employee you will be employed through a staff agency partner. Benefits during your temporary assignment may be provided by the staffing agency. Access to Tandem sponsored benefits is contingent upon conversion from temporary to regular full-time status. Conversion is determined based upon business need and job performance. YOU SHOULD KNOW: Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable state and local Fair Chance laws and regulations. A conditional offer of employment from Tandem is contingent upon successful completion of a pre-employment screening process comprised of a drug test (excluding marijuana) and background check, which includes a review of criminal history information. Tandem has good cause to conduct a review of criminal history information of candidates for this position, as this role may involve access to proprietary, sensitive and/or confidential information, including customer protected health information. This review is required to ensure that individuals in such roles uphold high standards of trust and integrity so as to protect the interests of our customers, employees, and stakeholders. SPONSORSHIP: Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time WHY YOU'LL LOVE WORKING HERE: At Tandem, we believe joy fuels excellence. That's why we've built a workplace that celebrates your achievements and supports your well-being. Our team thrives on pushing boundaries and fostering growth, all while maintaining a spirit of fun and camaraderie. This is just one of the ways we stay awesome! Explore the benefits and reasons to love Tandem at ___. BE YOU, WITH US! We embrace the value that every single one of us brings to the table. But sometimes we forget that when we don't meet 100% of a job description's criteria - maybe you're feeling that way right now? We encourage you to apply anyway. Because we want you to be you, with us. Tandem is firmly committed to being an equal opportunity employer and does not discriminate on the basis of age, disability, sex, race, religion or belief, gender identity or expression, marriage/civil partnership, pregnancy/maternity, or sexual orientation. We are an inclusive organization, and we welcome applications from a wide range of candidates. Selection for roles will be based on individual merit alone. REFERRALS: We love a good referral! If you know someone who would be a great fit for this position, please share! APPLICATION DEADLINE: The position will be posted until a final candidate is selected for the requisition or the requisition has a sufficient number of applications. Make a move that matters. Join Tandem Diabetes Care, where we're turning challenges into triumphs every day and where your talents will help shape a healthier, happier tomorrow. #LI-HJ1

Job DescriptionSUMMARY Deflash & Deburr is the Finishing method used to remove burrs and sharp edges on parts created by our machines. They are responsible for Maintaining a safe, organized, and clean work area. Perform additional tasks as assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES • Setup and removal of burrs or sharp edges., • Visual inspection of each part using calipers., • Read computerized work instructions., • Remove raised particles and shavings that appear on parts., • Repetitive filing or use of a grinder to smooth away nicks and fragments., • Sanding by hand or sanding with a pneumatic hand tool for more troublesome deformities., • Wash and polish parts prior to submitting for inspection., • Audit and order materials needed for deburring activities, • Ensure deburred parts are within tolerances and coincide to print specifications., • Measure and document when required that parts meet dimension requirements., • Send the first deburr article to quality control inspector., • Make any necessary adjustments per the inspector., • Receive final "buy-off" from inspector and debur remaining parts., • Upon completion of deburring, organize parts and send to next operation., • Maintain work area safe, organized and clean, • All other duties and responsibilities as assigned in support of the company's operations. REASONING ABILITY, • Ability to interpret a variety of instructions (written and oral)., • Critical Thinking skills required. COMMUNICATION SKILLS • Ability to communicate effectively and professionally. EDUCATION and EXPERIENCE • High school diploma or equivalent, • 1-2 plus years previous experience working in Manufacturing (Aerospace preferably)., • Must have basic computer skills, data entry is required to track the production floor., • Strong mechanical aptitude., • Team player., • Mechanically inclined and self-motivated., • Excellent work ethic and safety minded., • Excellent visual acuity and manual dexterity., • Requires working in ambient air temperature. Job Posted by ApplicantPro

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Irvine, CA Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job Description Autonomous Medical Devices Incorporated (AMDI), based in California, is a fast-growing company on a mission to transform point-of-care diagnostics. Our team of world-class engineers, scientists, clinicians, and manufacturing experts is pioneering breakthrough technologies in microfluidics, protein engineering, and cloud-connected data systems. We’re gearing up to launch our inaugural products from our ISO 13485-certified, 110,000-square-foot facility in Santa Ana, CA — and we're looking for passionate individuals to join us in shaping the future of healthcare. Location: This is a 1st shift onsite position located at our Santa Ana, CA office. Candidates living within a 25 mile range preferred. Summary of Position The Production Operator plays a key role in driving quality and efficiency on the production floor. This is a great opportunity for a motivated individual to lead by example. This hands-on role will perform essential assembly duties while ensuring strict compliance with instructions and our quality management system standards. The ideal candidate will follow detailed assembly specifications and proactively collaborate with production, engineering, and other teams to refine products and continuously improve processes. Essential Duties and Responsibilities • Set up and assemble parts., • Build parts in line with company expectations., • Will use simple hand and machine tools., • Accurately read and follow procedures, routing and other work instructions., • Follow established procedures and guidelines to meet production specifications, schedules, and quality standards., • Coordinate daily production activities and assign tasks to operators to meet production goals., • Safely operate machines and production equipment, following instructions., • Maintain a clean and organized work area along with equipment and materials., • Run, monitor and ensures parts flow through the automated machines properly, • Troubleshoot and resolve technical issues to minimize rejects., • Ensure adherence to quality product standards, minimizing defects., • Maintain accurate daily production records for performance analysis and meet company deadlines to adhere to production schedules., • Comply with relevant elements of quality systems., • Inspector output quality and address faulty products promptly., • Participate in audits to ensure compliance., • Follow test procedures according to company standards., • Assist with inventory management and material movement., • Verify arriving materials against purchase orders., • Ensure proper flow of materials and products in manufacturing areas per guidelines., • Report work progress, updates, and quality issues to the lead or supervisor., • Adhere to AMDI rules and regulations, including Environmental Health and Safety, Ethics, International Trade Compliance, and Human Resources., • High School Diploma or equivalent required., • Minimum of 1 year experience within assembly/production or related work experience., • Ability to comprehend and follow written specifications., • Ability to work in a fast-paced work environment while maintaining a strong attention to detail., • Ability to maintain a clean & organized environment., • Computer skills with the ability to navigate their way through the computer to enter data, review documents, check email, employee center, and announcements., • Excellent hand dexterity and coordination is a must as the position requires repeated reaching, bending, twisting, squatting, assembling and standing for long periods of time throughout the entire shift., • Excellent eyesight for attention to detail and safety awareness is a must., • Demonstrated experience in utilizing precision tools & equipment., • Prior work experience in a clean room environment is preferred but not required., • Requires on-going lifting and moving of materials., • Ability to lift up to 35 lbs., • Good verbal and written communication skills to effectively communicate to team members, engineering and quality personnel., • Ability to learn other skills as the need arises., • Experience in a manufacturing environment., • Ability to be flexible in changing situations., • Ability to be collaborative and work with the team to meet Company goals. Work Environment • Ability to work in a warehouse and manufacturing environment., • Work in a clean room environment with RH20% and below in some rooms., • Must review, understand, and adhere to Clean Room gowning requirements., • May possibly work in a BSL2 lab., • Some work stations will require Personal Protective Equipment (PPE) to be worn., • Specific Personal Protective Equipment (PPE) worn in cleanrooms and BSL2 lab. Autonomous Medical Device Incorporated offers a comprehensive compensation and benefits package to eligible employees. The following is available for temporary employees: • Free lunch to all employees when working at one of AMDI’s on-site locations., • Casual dress code., • Employee discounts on activities such as theme parks, movie theaters, hotels, rental cars, etc. Autonomous Medical Devices Incorporated (AMDI) will not accept unsolicited resumes from any source other than directly from a candidate. An Agency must obtain advance written approval from AMDI’s internal Human Resources team to submit resumes only in conjunction with approved valid fully executed contracts. We are not currently entertaining Staffing agency assistance for this position. Our commitment to an inclusive workplace: We are an equal opportunity employer and encourage people from all backgrounds to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status, or any other protected characteristic under federal, state, or local law. Powered by JazzHR xGl4wW3PR7

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

Job details Domain Production Job field / Job profile Manufacture assembly and repair - Inspection Job title Quality Inspector 2 Employment type Permanent Professional category Technician Part time / Full time Full-time Job description POWERED BY TEAMWORK. Are you ready to be part of a team that drives big ideas and even bigger wins? At Safran, we believe in the power of both collaboration and individual contributions. We understand that it takes diverse perspectives, problem-solving skills, dependability, and trust to push each other forward and achieve great success. For us, working here is more than just a job; it's a passion. There's the unique opportunity to lead the way in aerospace and defense and contribute to creating a safer and more sustainable world. We trust our employees to bring bold ideas to build the future of aerospace together, contributing to our ranking by TIME as the leading Aerospace & Defense company on the 2023 World's Best Companies list (#59 on the full list). Join our team and become part of the group that's making amazing things happen on the ground and in the skies. Together, we'll proudly step back and say, "We did that". Job Summary: Inspects, audits and reports on materials, processes and products used in the construction of aircraft interiors using variable or attribute measuring instruments and techniques to ensure conformance with the company's quality standards. This job reports to the Quality Inspection Supervisor or Quality Assurance Manager. Summary of Duties: • Performs first article inspection (FAI) of newly designed or revised products., • Inspection of incoming products to ensure proper paperwork is received and parts conform to specifications, engineering and purchase order. In-process inspection of parts being manufactured., • Inspects sub-assemblies used in the construction of aircraft interiors and all final products prior to shipment., • Interprets and reads engineering drawings, company and customer specifications to ensure accurate part manufacturing. The expected salary range for this position is between $24.50 - $25.62 USD. Actual compensation will be determined based on experience, education, and other factors permitted by law. Candidate skills & requirements At Safran Cabin, diversity & inclusion is a source of richness that adds quality of life, performance, and innovation. We welcome diverse contributions and provide equal employment opportunity to all individuals regardless of race, color, religion, sex/gender, sexual orientation, gender identity/gender expression, marital status, pregnancy, age, national origin, ancestry, disability/medical condition, military or veteran status, citizenship status, genetic characteristics or information, or any other characteristic protected by applicable federal, state, and local laws. We seek service-oriented team players with strong interpersonal skills and a positive attitude, adaptable to our innovative and evolving environment. Across all team members, we are looking for the following attributes: • Team oriented, • Process focused, • Open & honest communication, • Quality minded, • Ability to persevere and honor commitments, • Recognizes success, • Executes with urgency, • Creates solutions, • Customer focused in everything we do Level 2 Qualifications: Education: High school diploma or equivalent. Experience: 4-7 years. Computer Skill: Familiar with Windows Operating System®. Basic skills with Microsoft office systems. Other Skills: Must possess ability to use precision measuring instruments. Ability to read engineering drawings, specifications and other technical literature is preferred. Ability to effectively use inspection tools such as calipers, micrometers, tape measures, etc. Identify problems with some solving capabilities. Description: Intermediate Working Conditions: 1. Does require fluent communication in English language., 2. Employment Status may be part-time, full-time, or temporary., 3. Traveling may be required., 4. Protracted or irregular hours may be required., 5. Relocation to another Safran facility may be required. This description has been designed to indicate the general nature and level of work performed by an employee within this position. The actual duties, responsibilities and qualifications may vary based on assignment or group. Annual salary $24.50 - $25.62 USD Job location Job location North America, United States, California City (-ies) 7330 Lincoln Way CA 92841 Garden Grove Applicant criteria Minimum education level achieved High School Diploma/GED Equivalent Minimum experience level required More than 3 years Additional Languages preferred English (Fluent) ITAR Controlled Position: Select "Yes" if role requires U.S. citizenship/permanent residency Yes

Precision meets innovation! Join a top aerospace manufacturer as a QC Inspector in sunny Santa Ana.This Jobot Job is hosted by: Kelly Breen Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $25 - $35 per hour A bit about us: We are a precision manufa

Job Description The Industrial Hygienist is responsible for independently conducting environmental and hazardous materials monitoring, surveying, and sampling at residential, commercial, public, and industrial job sites. This role supports projects involving water and fire damage, demolition and renovation activities, indoor air quality concerns, and reported environmental complaints. The Industrial Hygienist evaluates conditions related to asbestos, lead-based paint, microbial contamination, and other environmental health hazards while ensuring full compliance with all applicable regulations. This position requires strong technical expertise, sound professional judgment, and the ability to work independently and accurately in the field. As a primary on-site representative of Titan Environmental Solutions, Inc., the Industrial Hygienist is expected to deliver a high level of professionalism and customer service, communicate technical findings clearly, and arrive on site within scheduled appointment times. The role requires flexibility for travel, night and weekend work, and variable job site conditions. Titan Environmental Solutions, Inc. prefers candidates holding Certified Asbestos Consultant (CAC) credentials, though qualified Certified Site Surveillance Technicians (CSSTs) with relevant field experience are also encouraged to apply. Requirements • Perform environmental and hazardous materials assessments at:, • Residential properties, • Commercial and private buildings, • Public and state-owned facilities, • Industrial sites, • Conduct sampling and monitoring activities related to:, • Water damage and fire damage incidents, • Hazardous material disturbances, • Demolition and renovation activities, • Elevated humidity and potential microbial growth conditions, • Perform surveys and assessments for:, • Asbestos-containing materials (CACs may lead and sign regulated projects), • Lead-based paint and lead hazards, • Mold, fungal, and bacterial contamination, • Indoor Air Quality (IAQ) complaints and investigations, • Evaluate client-reported environmental concerns and determine appropriate assessment methodologies, • Independently manage assigned field projects while adhering to Titan Environmental Solutions’ surveying and reporting standards, • Complete an average of up to six (6) limited surveys per day, depending on scope and site conditions, • Accurately collect samples, maintain proper chain-of-custody documentation, and submit field documentation promptly after each project, • Prepare clear, concise, and technically accurate written documentation and reports, • Communicate technical findings effectively, both verbally and in writing, to clients, contractors, and internal team members, • Maintain professionalism, punctuality, and a customer-focused approach at all job sites, • Arrive on-site within scheduled appointment windows outlined in work orders, • Follow all Titan Environmental Solutions safety policies and established field methodologies, • Comply with all applicable state, federal, and local environmental, health, and safety regulations Travel & Schedule Requirements • Frequent driving throughout Southern California to job sites and client meetings, • Willingness to travel out of town as project needs require, • Availability for night and weekend work, as needed Required (One of the Following): • Valid California Real ID Driver’s License with a clean DMV driving record, • Ability to pass a background check (Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.) • Ability to lift and carry up to 50 pounds, • Ability to climb ladders and stairs and access elevated or confined spaces, • Ability to crawl in tight or restricted areas to access building components, • Ability to stand, walk, bend, squat, kneel, sit, and climb for extended periods, • Ability to work in a variety of environmental conditions, including construction and industrial settings, • Strong time and priority management skills, • Self-motivated with the ability to work independently in the field, • Excellent technical writing and documentation skills, • Strong verbal communication skills and professional demeanor, • Proficiency with Microsoft Office and internet-based systems, • High attention to detail and accuracy, • Strong work ethic and accountability, • Ability to perform complex tasks and manage multiple priorities simultaneously, • Ability to perform effectively under high-stress and time-sensitive conditions, • Strong conflict management and negotiation skills, • Ability to work collaboratively in a team environment and across the organization Compensation & Pay Transparency (California Compliance) Titan Environmental Solutions, Inc. reasonably expects to pay between $38.00 and $45.00 per hour for this position. Compensation will be determined based on certification level (CAC vs. CSST), experience, and job-related qualifications, in compliance with California pay transparency laws. Eligible employees receive paid holidays, paid vacation, and access to group health, dental, and vision insurance, as well as a 401(k) retirement savings plan, plus any applicable state mandated insurance benefits. Holiday and vacation eligibility, accrual, and scheduling follow company policy and plan documents.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Inspection C Job Code: 33987 Job Location: Anaheim, CA Schedule: 9/80 R Job Description: Perform visual, electrical, and assembly-related mechanical in-process inspections, and some final inspections, with as-required supervision, to assure compliance to company and industry specifications. Essential Functions: \n • Verify previous operations are performed and accepted. \n, • Compare work order/document package to the assembly for correct part number, drawing, revision, as-required approval(s), and Engineering Change Order(s). \n, • Perform visual inspection of electrical assemblies, including circuit boards, solder joints, cables, transformers to company and industry specifications and standards. \n, • Check physical appearance of parts, sub-assemblies, and assemblies for adherence to established industry workmanship standards, such as damage, solder quality, component orientation, and wiring. \n, • Perform assembly-related mechanical and dimensional inspection using scales, micrometer and calipers. \n, • Perform / verify requirements as outlined in process specifications (for example, fluorescent light examination of conformal coating of circuit boards). \n, • Support less experienced inspectors, by assisting with informal training that utilize/reference company and industry specifications and standards. \n, • Review records for completeness, as required, including Work Orders, Engineering Changes, Manufacturing Process changes, Material Discrepancy Reports, Rework documentation, test data, etc. \n, • Verify assembly work order test results for completeness and correctness to the test requirements and limits. \n, • Perform assigned surveillance audits. \n, • Perform surveillance/verification of assembly workmanship, equipment calibration, manufacturing process, and test process, and other related duties, as assigned. \n, • Interface, as required, with internal counterparts, in Engineering, Production, Quality Engineering, Manufacturing Engineering, Contracts, and Internal Customers. \n, • Inform the inspection lead and/or lead of production of any assembly problems and generate a non-conformance document. \n, • High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 2 years of prior related experience. \n, • Experience with J-STD-001 and/or IPC-A-610 requirements. \n, • Must be able to interpret/ follow documents such as: Drawings, Procedures, Engineering Change (EOs) Work Orders and Work Instructions. \n, • Ability to work with measurements and math. \n, • Knowledgeable of assembly practices and requirements. \n, • One-year certificate in a quality related field from college or technical school desired. \n #LI-BR2 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Group Company: • Mitsubishi Chemical Carbon Fiber & Composites\n Mitsubishi Chemical Carbon Fiber and Composites (MCCFC) is composed of several companies, but at its core there are two. In April 2013, two California Companies, Grafil, a carbon fiber manufacturer in Sacramento and Newport Adhesives and Composites, a prepreg manufacturer in Irvine, were merged to create Mitsubishi Rayon Carbon Fiber and Composites (MRCFAC); then in 2017, we re-branded to MCCFC. Since our merge, we have made multiple acquisitions within the United States. In addition to these acquisitions, we have continued to improve and expand our current facility's capabilities. We are a company with a dedicated focus on responsiveness, quality, and customer support, we are working hard to match the growing global and domestic demand for these advanced materials. Job Purpose Entry level, In-Process/QC Inspector (3). Performs resin content and fiber area weight testing of in-process Unitape composite production operations, including opening and closing work orders. Performs viscosity testing to validate mix room output. Performs primary inspection functions on all products manufactured on the Adhesive, Woven and Unitape processing lines. Maintain full traceability of product from raw material to finished products for all samples collected, tested, retained. Maintains QC retained sample in 40° or 0° box storage. Compiles and records test data utilizing an electronic database. Records test information on appropriate production quality records and other production documents as required. Alerts appropriate personnel when nonconforming results or nonconforming conditions or raw materials are discovered. Principal Accountabilities • Obtain in-process or other production samples from production campaigns for retains or in-process testing. Conducts resin content and fiber area weight tests in a timely manner in order to support Unitape production operations and schedules., • Open and close Adhesive, Woven, and Unitape work orders., • Perform viscosity test to support mixing operations. Maintain viscometer database. Transfer viscometer test data into resin mix work order., • Maintain QC Retain samples in 40° or 0° box storage., • Verify VMP, paperwork PCC, MSC, run conditions, calibration status of equipment and raw material expiration dates prior to starting production campaigns., • Perform proper and effective testing and inspection per product and Work Order requirement., • Follow all coordinated test plans using proper test methodology and techniques. Maintain a neat and orderly work area., • Demonstrate a very high level of precision in testing. Maintain lot traceability identification in all materials, records, WIP, raw materials, sample retains, etc., • Compile generated test data. Completes appropriate quality records, forms and electronic database entry utilizing ERP., • Identify and label non-conforming material at the production line as well as any in-process non-conformities. Takes initiative to communicate non-conforming processes, non-conforming data, non-conforming raw materials and testing failures immediately with operators and with Quality Control and Quality Assurance. Contacts other departments as necessary such as manufacturing and engineering when product or equipment does not conform or perform to requirements., • Provide support to operation to diagnose the root cause of surface defects on all products manufactured on the Adhesive, Woven, and Unitape processing line., • Work under supervision of production supervisors or production manager when the QC supervisor is not on site., • Perform job duties in accordance with company procedures. Ensure process conformity (running product within specified run parameters). Places non-conforming raw materials, products or process conditions on DMR., • Follow safety rules and regulations to ensure a safe working environment. Utilizes PPE as required., • Exhibit exemplary conduct at all times in dealing with other MCCFC employees including any outside contacts. Contributes to a team-oriented environment., • May be assigned, and be expected to perform to acceptable standards, any relevant related duties as required by management.\n Knowledge / Skills / Experience To perform at a proficient level and to be fully qualified, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. A fully qualified individual must have the ability to conduct all job functions in English; read and comprehend correspondences, memos, and routine reports; interpret documents such as safety rules, operating and maintenance instructions, work instructions, test methods, and procedure manuals; calculate figures and amounts such as fractions, proportions, and percentages; apply concepts of basic algebra; write routine reports and correspondences; speak effectively before groups of employees; and complete tasks and assignments in a timely manner. Education/Experience: A minimum of a high-school diploma or GED is required. Work Experience: A minimum of 2-5 years' experience in composites manufacturing and procedures, or an equivalent combination of experience and/or training. Math Skills: Must have ability to calculate, subtract, sum, average, fraction and percentage. Understand addition, subtraction, division. multiplication and percentage. Specialized Knowledge/Skills/Abilities for performance of job: Intermediate skills in Microsoft Word and Excel are required. Multi languages are a plus. Pay Transparency (complete highlighted sections) • The salary range for this position is $21.50 - $25.00 per hour. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting., • Competitive Benefits, • Benefits begin on DAY 1!, • Employee Assistance Programs, • Curated Self-Paced Learning & Development Programs for all Employees Mitsubishi Chemical Group (MCGC) and any of our subsidiaries do not accept unsolicited resumes from individual recruiters or third-party agencies. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers or HR team. No placement fees will be paid to any firm unless specifically invited on the search by the MCGC Talent Acquisition team and such candidate was submitted to the MCGC Talent Acquisition Team via our Applicant Tracking System. EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. Applicants with disabilities may be entitled to a reasonable accommodation under the Americans with Disabilities Act and/or other applicable laws. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition.

Responsibilities Howmet Fastening Systems (HFS) is seeking a Quality Tech III- 2nd Shift for the Fullerton, CA site. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Requires the setup, operation and troubleshooting of CNC controlled machine tools to perform any sequence of programmed operation using programs and tool layouts provided. Essential Duties and Responsibilities This position is involved directly in the inspection of product after final processing. This position procures samples for dimensional inspection of aerospace parts to ensure conformity to customer drawing requirements. This position requires review of the customer drawing, measurement of the part using various types of calibration gages such as a micrometer, caliper, comparator, Keyence IM, drop gage, height gage, Go/No-Go gages, etc. Use of precision inspection tools and equipment, ability to read blueprints and procedures are required in the daily activities to ensure acceptance of product to specifications and requirements. Involvement in other inspections, such as, but not limited to, creating non-conforming material reports, receiving inspection and 3rd party certificate of conformance review. Knowledge and Skills: \n • Performing appropriate sampling plan per customer requirements\n, • Dimensional Inspection and Acceptance\n, • Visual Inspection and Acceptance\n, • Receiving Inspection and Acceptance\n, • Review of 3rd Party Certification of Compliance Documentation\n, • Supporting Quality in the recall of gages and tools\n, • Review of Manufacturing Router\n, • Prepare quality documentation including but not limited to dimensional inspection reports and logbooks for product acceptance \n, • Prepare non-conformance reports for Quality and Engineering evaluation \n, • Use hand tooling such as micrometers, microscopes, calipers, and thread gages\n, • Use sampling plans, drawings, work instructions, industry standards and specification to verify conformance of product acceptance. \n, • Other duties and/or responsibilities may be performed as part of cross-training or employee development plan.\n, • Basic computer skills for entering and accessing databases and spreadsheets\n\n Qualifications Basic Qualifications: \n • Three years related quality experience or training in accordance with the defined skills training matrix progression; or equivalent combination of education and experience.\n, • Prior experience in a Quality Inspector\n, • Ability to read and interpret documents such as safety rules, operating instructions, and procedures manuals \n, • Ability to write routine reports and correspondence \n, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio, and percent. \n, • Ability to apply common sense understanding to carry out detailed written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. \n The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. \n • While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts.\n, • The noise level in the work environment is usually moderate; however, it may be occasionally loud enough where hearing protection is required.\n The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The salary range for this position is $21.17 to $35.99 per hour. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Division: Southern Cal Main Project Location(s): Irvine, CA 92602 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt Position Description: Oversee work of Scheduling team, project staff, or consultants assigned to scheduling function, on one or more construction projects of varying size and complexity for Business Unit. Prepare and maintain schedules, develop and review project baseline, and monitor and track scheduling project progress. Essential Duties & Key Responsibilities: • Conduct scheduling activities while leading, managing, and supervising project scheduling activities of Scheduling group (e.g., Scheduling Engineers, project staff, or consultants) assigned to scheduling function on one or more construction projects of varying size and complexity throughout Business Unit (BU)., • Perform Scheduling activities including monitoring, tracking progress, and preparing summary and detail level schedules., • Develop full Critical Path Method (CPM) logic-generated baseline schedules for projects,, • Communicate project execution plan, monitor performance against original baseline schedule and previous month's forecasts, and promote early identification and mitigation of risks., • Develop construction schedule throughout all project phases, including RFP/Project Launch through Substantial Completion/Final Turnover., • Collaborate with project departments (e.g., Preconstruction, Commissioning, Procurement, Construction) to prepare detailed schedules., • Collaborate with VDC to integrate BIM, 4D models, and logistics planning., • Integrate LPS (Last Planner System) methodology into construction project schedule., • Perform monthly progress updates complete with narrative and create target comparison and periodic look-ahead schedules., • Develop and update cost and/or resource loaded schedules., • Conduct project schedule reviews with project leadership and provide Scheduling Dashboard statistics at Operations Review Meetings (ORMs) or other sessions (e.g., Pull Plan Sessions, Trade contractor meetings)., • Participate in Business Development (BD) and BU marketing activities for proposal presentations and activities as related to project scheduling and provide scheduling contract language and related documentation., • Provide support and training of scheduling software and planning and scheduling techniques to project and office employees., • Guide Scheduling group to facilitate and implement consistent application and adherence to company and Turner Scheduling Playbook' policies, practices, and procedures., • Engage with clients as Planning and Scheduling SME (subject matter expert) to educate and influence expectations for Planning and Scheduling standards, and best practices to satisfy owner standards and other requirements., • Perform audits of project schedules using diagnostic and comparison software to validate health and quality of schedule, Last Planner System integration, and review risk/gap analysis of scheduling function across projects. Provide feedback to Scheduling group to mature scheduling practices., • Engage with clients as Planning and Scheduling SME (subject matter expert) to educate and influence expectations for Planning and Scheduling standards, and best practices to satisfy owner standards and other requirements., • Conduct project site progress walks to capture progress, review and verify with project team, and update schedule accordingly., • Challenge project team based on previous, current, and future schedule data for As Built vs. Planned progress to ensure logical construction sequencing., • Perform audits of project schedules using diagnostic and comparison software to validate health and quality of schedule, Last Planner System integration, and review risk/gap analysis of scheduling function across projects. Provide feedback to Scheduling group to mature scheduling practices., • Implement and educate Scheduling group to use advanced techniques (e.g., weather conditions, TIAs (Time Impact Analysis), cost and resource loading) to identify potential schedule risks and delays., • As required, provide historical schedule information to defend against or initiate a claim. The salary range for this position is estimated to be 155,000.00 - 190,000.00 USD annualized. Qualifications: • Bachelor's Degree from accredited degree program in Engineering, Construction Management, Building Construction, or related field, with minimum of 8 years of related experience or equivalent combination of education, training and experience, • Large construction project experience (>$100m), • Scheduling Certification desired (e.g., Association for the Advancement of Cost Engineering (AACE), Planning & Scheduling Professional (PSP), Project Management Institute Scheduling Professional (PMI-SP)), • Experience in construction project engineering and supervisory positions, • Knowledgeable of building construction, materials, systems, market conditions and Trade practices, • Ability to interpret contract documents, drawings, specifications, and scopes of work to build schedules, • Proficient use of scheduling software applications (e.g., Oracle Primavera P6), • Proficient use of scheduling diagnostic and comparison tools (e.g., Acumen Fuse, Change Inspector), • Advanced experience conducting gap analysis and managing scheduling risks, • Advanced knowledge of estimates for project schedule development, • Familiar with earned value concepts and using construction resources to validate productivity and durations, • Ability to develop metrics and track results, • Strong analysis, critical thinking, good judgment, and problem-solving skills The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee occasionally performs work on-site at construction work sites, office locations, and/or off-site venues. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office or remote setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Precision Castparts Corp - - Responsibilities: Perform In-process and FAI Inspections; Identify, Reject, and Segregate Non-Conforming products; Creates Final Test Reports; Performs Shipping Inspection; Pass Certifications in Primary Area + 10 Additional Areas.

Precision Castparts Corp - - Responsibilities: Perform quality inspection tasks; Complete First Article inspection forms (AS9102 Rev C); Troubleshoot on test machines; Program Keyence equipment; Coordinate with Quality Department on needs.

Precision Castparts Corp - - Responsibilities: Perform Final Inspection tasks; Perform In-process and FAI Inspections; Create Final Test Reports; Performs Shipping Inspection; Identify, Reject, and Segregate Non-Conforming products.

Precision Castparts Corp - - Responsibilities: Perform quality inspection tasks; First Article complete form knowledge; Filling out AS9102 Rev C; Troubleshooting on Test Machines; Program Keyence.

Inspector - Receiving & In-Process Inspection At Endress+Hauser, progress happens by working together. As the global leader in measurement instrumentation, our ~17.000 employees shape the future in the field of process automation. Whether developing and realizing new technology as a team, collaborating to build instrumentation, or strengthening vital relationships with countless global industries, we work to create trusted relationships that help everyone thrive. As a family-owned company, we look beyond short-term moves and work to create a vision that is forward-thinking for our people, our clients, and the world at large. What is the role about? The Inspector is responsible for performing quality inspections on incoming materials and components, as well as monitoring and verifying product quality during the manufacturing process. This role ensures compliance with company standards, customer requirements, and regulatory guidelines to maintain the highest level of product integrity. Which tasks will you perform? You will: Receiving Inspection: • Inspect incoming raw materials, components, and assemblies against purchase order specifications, drawings, and quality standards., • Verify supplier documentation, including Certificates of Conformance and material certifications., • Perform optical filter checks using spectrophotometer devices to validate transmission and wavelength specifications., • Record inspection results and maintain accurate documentation in the quality system., • Identify and segregate non-conforming materials; initiate and document DMRs (Defective Material Reports). In-Process Inspection: • Perform inspections at designated stages of the manufacturing process to ensure compliance with specifications and work instructions., • Verify critical dimensions, functional characteristics, and visual quality using appropriate tools and gauges., • Support production teams by providing feedback on quality issues and assisting with corrective actions., • Document inspection results and maintain traceability of inspected parts. What do we expect from you? You: • Working knowledge of Material Traceability requirements., • Culturally aware and sensitive to cultural differences, capable of working effectively in cross-cultural teams., • Perform Operational QC for optical sensors and machine shop parts, including checking documentation according to EN 10204 and ASTM standards, • Familiarity with handling explosion-proof materials, • High school diploma or equivalent; technical training or certification in quality inspection preferred., • Minimum 5 years of experience in quality inspection within a manufacturing environment., • Strong understanding of mechanical drawings, tolerances, and inspection techniques., • Proficiency with measurement tools (calipers, micrometers, thread gauges, pin/plug gauges, bore gauges, Profilometer/surface finish devices, inspection set ups using granite plate and fixtures) and basic knowledge of GD&T., • Familiarity with ISO 9001 quality systems and documentation practices., • Ability to work independently, with strong attention to detail and problem-solving skills., • Basic computer skills - Microsoft Office Suite (Word, Excel, PowerPoint) and Microsoft Teams application. What can you expect from us? • Family-owned, highly committed global company with a sustainable vision of the future., • Lifelong learning encouraged by versatile training, tuition reimbursement, success coaching, and furthereducation opportunities., • Comprehensive benefit package (to include medical, dental, vision) and 401(k) savings with company match., • Compensation is competitive and includes bonus opportunities., • Work-life balance encouraged through our 10 company-paid holidays, paid time off, paid parental leave, employee assistance programs (financial, mental, and physical health and wellbeing), and employee discounts., • Employees work in a safety-first, climate controlled, clean manufacturing facility with utilization of Lean practices and ergonomic workstations to enhance productivity and comfort. The listed salary range for this position is $21 to $26 per hour, but the actual package offered may vary depending on different factors, including market location, job-related knowledge, skills, and experience. The total compensation for this position would include other elements which include an annual nondiscretionary bonus. How do you apply? To apply, we kindly ask you to upload your documents on our career page. Endress+Hauser is an equal opportunity employer and does not discriminate on the basis of any protected classification, including protected veteran and disability status.

Join a mission-driven company committed to quality, innovation, and exceptional customer experience. This Jobot Consulting Job is hosted by: Julibeth Canafax Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $35 per hour A bit about us: Join a mission-driven company committed to quality, innovation, and exceptional customer experience. Why join us? 401K Medical Dental Vision Life and AD&D Disability Voluntary Benefits (Accident, Hospital, Critical Illness) Pet Insurance Employee Assistance Programs (Counseling) HSA Job Details The Quality Inspector is responsible for inspecting, testing, and verifying products to ensure they meet quality standards, specifications, and customer requirements. Hours: 1st shift Days: Monday-Friday Job Requirements: • Conduct first piece, in-process, and final inspections to verify product quality and conformance., • Perform inspections using standard measuring tools, equipment, and technical documentation., • Complete first article inspections and maintain accurate inspection records and reports., • Identify and communicate non-conforming materials or products to production teams., • Inspect incoming materials and components from suppliers for compliance with requirements., • Review production documentation for accuracy prior to release., • Previous experience in manufacturing, quality control, or inspection environments, • Ability to read and interpret engineering drawings, blueprints, and specifications, • Hands-on experience using precision measuring tools such as calipers, micrometers, gauges, or electronic inspection equipment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Join a Top leading company in the Aerospace industry This Jobot Job is hosted by: Julibeth Canafax Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $45,000 - $75,000 per hour A bit about us: Join a Top leading company in the Aerospace industry Why join us? 401 K Paid time off Job Details The Quality Inspector is responsible for inspecting, testing, and verifying products to ensure they meet quality standards, specifications, and customer requirements. Hours: 1st shift Days: Monday-Friday Job Requirements: • Conduct first piece, in-process, and final inspections to verify product quality and conformance., • Perform inspections using standard measuring tools, equipment, and technical documentation., • Complete first article inspections and maintain accurate inspection records and reports., • Identify and communicate non-conforming materials or products to production teams., • Inspect incoming materials and components from suppliers for compliance with requirements., • Review production documentation for accuracy prior to release., • Previous experience in manufacturing, quality control, or inspection environments, • Ability to read and interpret engineering drawings, blueprints, and specifications, • Hands-on experience using precision measuring tools such as calipers, micrometers, gauges, or electronic inspection equipment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Join a company focused on innovative technologies and high-performance products in a specialized technical field. This Jobot Consulting Job is hosted by: Julibeth Canafax Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $28 per hour A bit about us: Join a company focused on innovative technologies and high-performance products in a specialized technical field. Why join us? Medical, Dental, Vision 401K Paid Time Off Job Details The Quality Inspector is responsible for inspecting, testing, and verifying products to ensure they meet quality standards, specifications, and customer requirements. Hours: 1st shift 8am-430pm Days: Monday-Friday Job Requirements: • Conduct first piece, in-process, and final inspections to verify product quality and conformance., • Perform inspections using standard measuring tools, equipment, and technical documentation., • Complete first article inspections and maintain accurate inspection records and reports., • Identify and communicate non-conforming materials or products to production teams., • Inspect incoming materials and components from suppliers for compliance with requirements., • Review production documentation for accuracy prior to release., • Previous experience in manufacturing, quality control, or inspection environments, • Ability to read and interpret engineering drawings, blueprints, and specifications, • Hands-on experience using precision measuring tools such as calipers, micrometers, gauges, or electronic inspection equipment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Check physical appearance of parts, sub-assemblies, and assemblies for adherence to established industry workmanship standards, such as damage, solder quality, component orientation, and wiring. Interface, as required, with internal counterparts, in Engineering, Production, Quality Engineering, Manu

Title About the Organization Applied Aerospace & Defense (Applied) is a premier provider of advanced design, engineering, and vertically integrated manufacturing solutions for leading and next-generation space and defense technology companies. Applied builds complex hardware for extreme operating environments and is focused on three core markets: Space and Launch Systems, Defense Aviation and Airborne Systems, and C5ISR and Precision Strike Systems. With decades of space and defense manufacturing heritage, Applied combines deep material science and IP-enabled process expertise with the ability to enable rapid prototyping, enhance new product development, and responsively scale production. Across its nationwide infrastructure of advanced manufacturing facilities, Applied continuously supports a balanced mix of next-generation technology and platform development, large scale production programs, and aftermarket sustainment for enduring platforms. EOE Statement Applied Aerospace and Defense is an equal opportunity employer. Description The Quality Inspector is responsible for the inspection, documentation, and certification of critical components throughout the production process, including parts subject to flight safety requirements. This role ensures compliance with AS9100, customer specifications, and regulatory requirements through precise measurement and rigorous recordkeeping. Essential Duties & Responsibilities: Performs various inspection activities utilizing precision inspection equipment at all phases of product manufacturing. Uses GD&T concepts, customer supplied specifications, and internal standards, to ensure compliance with AS9100, NADCAP, and other regulatory requirements. Pay Range: $30.00 to $36.00 per hour Position Requirements • Read and understand complex engineering drawings to determine dimensions and tolerance specifications, • Compare recorded measurements to blueprint dimensions and tolerances and notify specified persons of discrepancies using NCF and MRB process, • Familiarity with the use of various inspection and measurement equipment, i.e. CMM, FARO Arm, Borescope, Optical Comparator, etc. preferred, • Strong understanding of units of measure and applicability to GD&T principles, • Must be self-motivated and able to adjust to a dynamic work environment and tempo while maintaining a high level of attention to detail., • Strong professional ethics combined with the ability to function well on teams., • Experience in aerospace manufacturing or similarly regulated industry preferred., • Familiarity with performing various inspection activities to include, i.e., 1st piece, in-process, final inspections, • High School Diploma or GED, • Knowledgeable of MS Word, and Excel, • Minimum of 3 to 5 years' experience in the operation of CMM's preferred (Mitutoyo/Metris/Zeiss)

In the role of Construction Inspector II, we'll count on you to:. Inspect highways, roadways, and bridge construction activities. Plan, schedule and coordinate the construction inspection, quality assurance inspections of bridge and transportation projects, including foundations, paving, earthwork,

In the role of Construction Inspector I, we'll count on you to:. Inspect highways, roadways, and bridge construction activities. Plan, schedule, and coordinate construction inspections, quality assurance inspections of bridge and transportation projects, including foundations, paving, earthwork.

Job DescriptionDescription: Overview: Reporting to the CSO, responsible for managing and directing all PFS central business office functional area’s (billing, claim submission, A/R follow-up, denial resolution, customer service, bad debt, vendor management). Develop and implement the organization's business office policies and procedures and ensure employee compliance. Partner with clients to improve workflow using data and analytics and KPI’s to measure health of revenue cycle. Managing the company goals and contractual agreements. Hiring qualified staff and training them to perform to high performance workforce company standards. Duties & Responsibilities: • Strategic Leadership: Oversee the financial and administrative operations of physician and hospital central business office. Develop and implement strategies for optimizing revenue, ensuring efficient billing processes, and maintaining compliance with healthcare regulations., • Financial Management: Manage budgeting, financial planning, and analysis for the centralized business office. Monitor financial performance, identify trends, and implement cost-control measures., • Operational Oversight: Ensure best practice operation of claim generation, billing, accounts receivable, denial management, patient collections and bad debt processes. Implement policies and procedures to improve efficiency and accuracy., • Compliance and Quality Assurance: Ensure adherence to healthcare laws, regulations, and standards. Oversee audits and implement corrective actions to maintain compliance and improve service quality., • Team Leadership: Lead, mentor, and develop a diverse team of professionals. Foster a collaborative environment that encourages high performance and continuous improvement., • Stakeholder Collaboration: Work closely with the client’s revenue cycle leaders to enhance their operational workflows based on best practice data. Develop strong relationships with payers, vendors, and other external partners. Participate in client’s revenue cycle meetings as the PFS partner., • Technology Utilization: Leverage technology to enhance operational efficiency. Oversee the implementation and maintenance of healthcare information systems, including electronic health records and billing software. Position Requirements & Qualifications · Bachelor’s degree or minimum of eight years of leadership experience in healthcare administration, focusing on PFS back-end functions: claims, billing, accounts receivables, denial management, patient collections and bad debt. Knowledge, Skills & Abilities • Knowledge of rules and regulations related to healthcare revenue cycle administration, such as CMS rules, HIPAA, state compliance rules., • Knowledge of healthcare host systems., • Skilled in communication (oral and written) required., • Skilled in medical billing software, EHR systems, and other healthcare technology and software applications is essential., • Skilled in leadership, communication, and strategic thinking, • Skilled in healthcare financial management, billing processes, insurance, and regulatory compliance., • Ability to resolve problems and manage conflict., • Ability to lead a team towards increasing revenue generation. Disclosure Statement: As part of the Currance application and hiring experience, all candidates are subject to a criminal background check and a government exclusion check. The government exclusion check is a mandatory screening process that verifies whether an individual is listed on federal or state exclusion or watchlists, including but not limited to, the Office of Inspector General’s List of Excluded Individuals/Entities (LEIE) and the System for Award Management (SAM.gov). These screenings are conducted to ensure compliance with applicable federal and state laws and regulations, to protect the integrity of federally funded programs, the clients we support, and to prevent participation by individuals who are excluded due to fraud, abuse, or other misconduct. By submitting an application, candidates acknowledge and consent to these checks as a condition of employment or engagement.

Job DescriptionDescription: Role Summary If you have a solid understanding of electronic and electro-mechanical components, design specifications, and testing procedures, if you are also detail-oriented, and experienced in issue diagnosis and resolution, this role may be for you. Please read on: As a Component Engineer at Rand Technology, you will play a pivotal role in providing technical support across various aspects of electronic and electro-mechanical components. Your responsibilities include assisting sales, purchasing, and customers with technical inquiries, inspecting and validating components, supporting testing and troubleshooting efforts, and collaborating on data analytics projects. Additionally, you will be involved in component selection, communicating with manufacturers, diagnosing and resolving issues, and creating comprehensive documentation. This role is based in our office in Amsterdam. Essential Functions • Technical Support to sales, purchasing and customers: Serve as the primary point of contact for all technical electronic and electro-mechanical component support questions regarding part numbers, part specifications, part number verification, marking and label verification, date code decoding, mechanical and compliance characteristics, manufacturing, assembly and testing, technical bulletins, PCNs, lifecycle, etc. Find part number crosses/replacements to meet customer requirements and create detailed analysis reports. Assist customers with new parts design-ins based on design specifications., • Customer Communication: Respond to technical component inquiries and ensure accuracy of Rand Technology orders., • Technical Support to Quality Control: Inspect and validate electronic and electro-mechanical components. Review and create component inspection procedures. Respond to non-conformances and discrepancies, analyze, and document inspector findings and troubleshoot technical issues related to inspections and quality control., • Technical Support to Testing and Troubleshooting: Support in-house testing of electronic components for compliance with specifications. Create and review testing procedures. Troubleshoot issues and recommend test modifications as needed., • Technical Support to Analytics Team: Collaborate on data analytics projects as related to components related information., • Component Selection: Select appropriate electronic and electro-mechanical components based on customer requirements., • Original Manufacturer Communications: Contact component manufacturer support for technical documents and component related issues., • Issue Diagnosis and Resolution: Support NCs, RMAs and MRB. Resolution of inspection discrepancies and non-conformances. Support to purchasing for supplier issues. Diagnose technical issues related to customer component use. Provide effective resolutions to end-users issues. Provide FA support., • Solid understanding of electronic and electro-mechanical component datasheet specifications., • Understanding of Electronics Principles, Schematics, Circuit Design and layouts, technologies, product families, component manufacturing, assembly, testing and applications., • Problem-Solving Abilities: Ability to analyze complex electronic components, identify issues, and propose effective solutions., • Familiarity with various tools and electronic component testing instruments usage, particularly related to determining authenticity and quality., • Understanding of and experience in a certified environment preferred – including ISO9001, ISO14001, ESD S20.20, and AS6081., • Attention to Detail: Precision in component analysis, selection and testing., • Critical Thinking: Apply logical reasoning to diagnose problems and find solutions., • Communication Skills: Effective communication with team members, vendors, and clients., • A positive can-do attitude., • Adaptable to change., • Works well under pressure., • Bachelor’s degree in electrical engineering, electronics engineering. Advanced degrees or certifications are advantageous., • Refined practical skillset with electronic assemblies advantageous as is firsthand knowledge of analog and digital electronics., • Must be able to remain in a stationary position for long periods of time during the shift., • Finger, wrist and hand dexterity with repetitive motion.

Job Description Job Description We are a provider of professional engineering, construction management and public works inspection services to cities, water/sewer/special districts and other public agencies. Our firm specializes in construction, program, and project management services. Who we’re looking for: Public Works Inspector will work on Public Works Construction projects including concrete curbs, gutters, curb ramps, sidewalks, storm drains, RCP, water & sewer main replacements, water/sewer laterals, street lights, traffic signals, median landscape work, monument/way-finding signs, utility relocation & adjustments, grind & overlay, slurry/cape/chip seal, roadway re-construction & rehabilitation, ARHM, conventional asphalt, traffic loop replacement, striping and signage. The inspection work will be for Cities and Water Districts in Los Angeles, Orange, San Bernardino and Riverside Counties. These positions suit individuals who want to work part-time or full-time and on a project base. Responsibilities & Duties: • Reviews Plans, Specs. & Estimates (PS&E) thoroughly, highlights/tabs them; has a thorough understanding of the project., • Oversees the day to day project construction activities and be the eyes and ears of the client and the firm., • Monitors and records all work conducted by the contractor., • Prepares a comprehensive Daily Report, including measurements, quantities, activities, etc., • Identifies and records any construction obstacles impacting the scope, plans, specifications, and/or estimate., • Communicates with the Construction Manager, City, Contractor, and other parties involved in the project., • Documents the contractor's daily compliance/violations ensuring quality control of project construction activities., • Understands general construction, methods, materials, safety practices, quality control, and contract administration., • Conducts on-site inspections, enforcing compliance of plans, specifications, standards, safety practices, and materials., • Reviews traffic control plans and procedures to ensure compliance with construction zones., • Performs constructability reviews of plans and specifications., • Assists in review of contractors claims, change orders, etc., • Attends pre-construction, kick-off, progress, and field meetings., • Checks dimensions, measures quantities, materials' use and Ten (10) years of Construction Inspection experience working for Cities or Counties Public Works Departments or Water Districts or providing similar services for Cities, Counties and Water Districts as a consultant. Applicants without the appropriate background, City, County, Water/Sewer/Special District Inspection Experience will not be considered. · Abilities: · Good oral and written communication skills. · Knowledge with computer related tasks. · Ability to prepare reports and correspondences. · Ability to identify project issues, establish solutions, and review outcomes. · Familiarity with local, state, federal regulatory requirements, standard plans and specifications for public work construction (Greenbook) including standards for water and sewer main replacement projects. . Job requires driving to the job sites and meetings. Job Types: Project Base Company DescriptionA Project/Construction Management, Staff Augmentation (Consultant City Engineer, Public Works Director) and Public works Inspection firm. Applications without the appropriate background are discouraged to apply and will not be considered.A Project/Construction Management, Staff Augmentation (Consultant City Engineer, Public Works Director) and Public works Inspection firm. Applications without the appropriate background are discouraged to apply and will not be considered.

Job Description Overview of Job Description: Inspect and report on inbound container shipments in accordance with guidelines and protocols established by Design, Purchasing and Product Optimization/Quality Assurance departments. Conduct inspections in-progress on Production lines for damaged product and work to minimize damage by providing solutions for prevention. Monitor and manage damaged (scrapped) inventory while interfacing with General Manager, Purchasing, Production and Warehouse departments to identify root cause and decision and disposition for damaged inventory. Specific Duties and Responsibilities: Approved Production Samples • Participate in daily reviews of re-usable production samples with Purchasing, Design and Product Optimization. Track comments, notes and approvals. Set up and maintain Approved Production Samples in appropriate warehouse locations. Ensure all approved samples are accounted for., • Have accurate listing of Approved Samples (AS) that are needed and request them from Product Optimization working area if any are missing before container arrival. Inbound Inspection • Responsible for conducting quality inspections of First Articles arriving on inbound shipping containers or via other delivery methods., • Follow Inspection Process as detailed in Quality Assurance Receiving Inspection Manual., • Conduct testing as required for each product, including conformance to signed Production Sample, inspection for insects, and measurement of moisture as needed., • Evaluate First Articles for conformance to approved production samples and communicate approval for release from Quality First article (QFA) hold or escalate non-conformances to Product Optimization/Quality Assurance Management for exceptions or acceptance determination. Quality Alerts • If First Article is non-conforming for various reasons, Quality Alert Standard Operation Procedure is initiated as detailed in Quality Assurance Receiving Inspection Manual and Document Control., • Manage rework personnel when assigned to QA Department., • Accurate reporting of rework status. Damaged Product Disposition • Identify damaged items on the production lines and coordinate with various departments to minimize this damage., • Assist Management in setting parameters for damages: Acceptable, Unacceptable and Maybe. Follow up as needed to ensure that production assembly teams are following sort parameters., • Assure that Warehouse Line Support removes damages from Production lines and properly separates them in return area by QA standards: 1) Acceptable 2) Unacceptable 3) Save for employee sale 4) Donation., • Train assembly workers and others to correctly identify what is damaged or not unusable compared to good usable items., • Use daily damage report to prioritize investigation of causes., • Summarize on a weekly basis the damaged products requiring decision/disposition and prepare to meet weekly or as needed on site with GM, QA Manager, Director of Operations to make save/hold/scrap/rework decisions as each situation is determined. Administrative and Other Responsibilities: • Maintain accurate inspections, damage, rework and disposition records in accordance with WA Requirements., • Track and update Approved Production Samples., • Communicate inspections Results, Quality Issues., • Ensure forms and logs are properly completed, filled and accessible for review. Knowledge, Skills and Abilities: • Previous experience in quality assurance related work is required. Familiarity with SOP’s, Inspection Manuals and QA Documentation., • Attention to detail, with ability to accurately inspect and evaluate finished goods, visually and by comparison to written document., • Demonstrates team working skills. Includes the ability to demonstrate a fair and consistent application of quality standards with all employees., • Ability to troubleshoot, analyze, solve problems and create solutions and improvements as needed during production processes., • Ability to work independently and on the production floor., • Good verbal communication skill required. Bilingual (Spanish) is helpful., • Reading and writing skills required., • Computer skills including Microsoft Office Suite (Outlook, Excel, Word). Education: • High School diploma or equivalent required., • Additional education or training in Quality Assurance, Manufacturing or related field preferred.Company DescriptionSince 1984, Houdini Inc. has been the leading supplier of upscale food and wine gifts to re-seller's throughout the U.S. Our trend-right gift assortments are found at America's foremost warehouse clubs, mass merchandisers, liquor retailers, specialty stores, catalog companies and internet sites.Since 1984, Houdini Inc. has been the leading supplier of upscale food and wine gifts to re-seller's throughout the U.S. Our trend-right gift assortments are found at America's foremost warehouse clubs, mass merchandisers, liquor retailers, specialty stores, catalog companies and internet sites.

Job DescriptionDescription:We are hiring in the following states:AR, AZ, CA, CO, FL, GA, IA, IL, MO, NC, NE, NJ, NV, OK, PA, SD, TN, TX, VA, WA, and WIThis is a remote position.Overview:As a healthcare revenue cycle business, we manage insurance claims and oversee timely claim resolution and payment processing for our clients. This role involves overseeing and completing the administrative responsibilities of billing insurance, correcting rejections, resolving billing rejections, collaborating with client teams to ensure the financial success of the healthcare organizations we support. This team uses Meditech Expanse and is in CST. Duties & Responsibilities: • Prepare and submit billing data and medical claims (hospital and physician) to insurance companies in accordance with federal, state, and payer mandated guidelines., • Comply with productivity standards while maintaining quality levels., • Ensure proper hospital claim submission and payment through review and correction of claim edits, errors, and denials., • Investigate, follow up with payers, and work claims as assigned., • Perform posting billing adjustments., • Ensure billing reroutes are worked timely and comply with company procedures., • Conduct duties in a professional and timely fashion., • Achieve maximum reimbursement for services provided., • Punctual, dependable, and adapt easily to change., • Experience with EPIC system preferred., • High school diploma or equivalent required, • Associate's degree preferred, • 2+ years of work experience as a Medical Biller or similar role., • Proficiency in Microsoft Office Suite, Teams, and virtual meeting platforms (GoToMeeting, Zoom)., • Knowledge of ICD-10 Diagnosis and procedure codes and CPT/HCPCS codes., • Knowledge of rules and regulations relative to medical billing practices and regulations., • Knowledge of revenue cycle data analysis and interpretation., • Skilled in medical accounts investigation., • Skilled in billing software and electronic medical records., • Skilled in analytical and critical thinking., • Skilled in professional writing and communication., • Skilled in time management and organization., • Ability to problem-solve and organize., • Ability to multitask and manage time effectively., • Ability to provide attention to detail. Disclosure Statement: As part of the Currance application and hiring experience, all candidates are subject to a criminal background check and a government exclusion check. The government exclusion check is a mandatory screening process that verifies whether an individual is listed on federal or state exclusion or watchlists, including but not limited to, the Office of Inspector General’s List of Excluded Individuals/Entities (LEIE) and the System for Award Management (SAM.gov). These screenings are conducted to ensure compliance with applicable federal and state laws and regulations, to protect the integrity of federally funded programs, the clients we support, and to prevent participation by individuals who are excluded due to fraud, abuse, or other misconduct. By submitting an application, candidates acknowledge and consent to these checks as a condition of employment or engagement.

Job Description With over 18 years in the nutraceutical industry, White Bottle has a strong passion for developing the best nutritional supplements, vitamins, and herbal products that nature can offer. Our approach to private label manufacturing is customer-centric, anticipating your needs and your customers’ taste. We believe that transparency is the only way to create working partnerships with our clients. We want our customers to know every detail of our formula development as well as get the advice they need to feel totally confident with the quality of their products. Every client is unique and deserves special attention no matter the size. We focus on providing the best user experience by ensuring that our products will ultimately serve your practice. Job Summary The primary responsibility of the Product Inspector I is to conduct sampling and inspection of all materials, components, finished products, and closures utilized in the manufacturing process. These activities must adhere rigorously to established quality assurance programs and approved procedures, including compliance with raw material specifications. Key Responsibilities of a Quality Control Inspector: • Examine finished product samples using established methodologies, including comparison against master standards, dimensional measurement, and functional testing., • Ensure the assembly line rigorously adheres to all established SOPs (standard operating procedures), policies, and regulatory/legal requirements., • Monitor production equipment for safety compliance and immediately remove any non-compliant or hazardous machinery from service., • Propose and implement process enhancements to optimize production efficiency and elevate final product quality., • Conduct training for the production team to maintain and reinforce high-quality standards across all operations., • Engage in continuous learning and training to remain current with the latest industry knowledge and standards., • Undertake additional tasks as assigned by management. Qualifications • Associate's Degree in a related field, OR a minimum of three (3) years of experience in Document Assurance, or an equivalent combination of education and experience., • Proficiency in Microsoft Word, Excel, Access, and PowerPoint., • Strong verbal and written communication skills., • Experience working with an Electronic Document Management System (EDMS) to maintain and process document revisions as approved by change control., • Experience in a regulated GMP environment, including familiarity with associated terminology and workflows., • Experience in nutraceutical or food manufacturing is highly desirable., • Bachelor's Degree is preferred, • Strong English reading and writing proficiency required. Work Environment & Physical Requirements • Approximately 100% of the work is performed on the production floor and warehouse, • environment, • Frequently exposed to a variety of extreme conditions at job sites, • Noise level in the work environment and job sites can be loud, • Routinely uses standard office equipment such as computers, phones, photocopiers,, • filing cabinets and fax machines, • Required to use Personal Protective Equipment necessary for the various environments, • Physically fit with the ability to lift objects weighing between 25–50 poundsCompany DescriptionWith over 18 years in the nutraceutical industry, White Bottle has a strong passion for developing the best nutritional supplements, vitamins, and herbal products that nature can offer. Our approach to private label manufacturing is customer-centric, anticipating your needs and your customers’ taste. We believe that transparency is the only way to create working partnerships with our clients. We want our customers to know every detail of our formula development as well as get the advice they need to feel totally confident with the quality of their products. Every client is unique and deserves special attention no matter the size. We focus on providing the best user experience by ensuring that our products will ultimately serve your practice.With over 18 years in the nutraceutical industry, White Bottle has a strong passion for developing the best nutritional supplements, vitamins, and herbal products that nature can offer. Our approach to private label manufacturing is customer-centric, anticipating your needs and your customers’ taste. We believe that transparency is the only way to create working partnerships with our clients. We want our customers to know every detail of our formula development as well as get the advice they need to feel totally confident with the quality of their products. Every client is unique and deserves special attention no matter the size. We focus on providing the best user experience by ensuring that our products will ultimately serve your practice.

Job DescriptionBenefits: • 401(k) As part of a team, you will maintain and advance quality standards by approving incoming materials, in-process production, finished products, and recording the results. Excellent communication, leadership skills, and blueprint reading are a must, as well as a keen attention to detail. Job Description • Approve in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to production supervisor., • Approve finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirm re-work., • Document inspection results by completing reports and logs; summarizing re-work and waste; input data into quality database., • Keeps measurement equipment operating by following operating instructions; call for repairs., • Maintains safe and healthy work environment by following standards and procedures; comply with legal regulations., • Updates job knowledge by participating in educational opportunities; read technical publications- including ISO 9001-2015 and AS9100D standards., • Accomplishes quality and organization mission by completing related results as needed., • Advance our quality system under ISO 9001-2015 and AS9100D requirements., • Fill in gaps in the production process.Skills and Qualifications Basic Math Skills, Computer Skills (knowledge of SolidWorks is a plus), Analyzing Information, Reporting Research Results, Documentation Skills, Promoting Process Improvement, Safety Management, Managing Processes, Manufacturing Methods and Procedures, Supports Innovation, CAD, Quality Engineering, Operations Research Physical Demands • Moving parts, machine noise, • Able to walk/stand for hours at a time, • Ability to lift/push/pull/carry up to 100 pounds independently., • Use of hands and fingers Starting rate depending on experience. Must be able to work overtime as needed. Shipping bonus eligible based on performance and attendance. Company Description KSR Foam and Technical Products is the leading fabricator of finished reticulated polyurethane/anti slosh foam kits and technical products for a wide range of military, commercial and high-performance applications. We are a small and growing company located in Garden Grove.

Job Description SUMMARY Performs quality inspections to assure compliance with Custom Power specifications. ESSENTIAL DUTIES AND RESPONSIBILITIES include but not limited to the following. Other duties may be assigned as needed. • Inspects incoming materials per applicable drawings, specifications, and PO Notes., • Takes measurements using calipers, micrometers, rulers, multimeters, etc. to determine product conformity., • Performs in-process and final inspections, as needed., • Enters and maintains records of inspection To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Ability to effectively operate visual magnification devices (microscopes, etc.), • Ability to effectively operate and interpret basic mechanical measuring devices, • Comfortable working in a manufacturing / production environment, • Candidate must have good attention to detail with vision correctable to 20/20., • Good verbal and written communication skills, • Demonstrates proficiency in Windows, MS Office Suite High school diploma or general education degree (GED) required; or technical school preferred; and two plus years related experience and/or training; or equivalent combination of education, certificate, and experience. Recent experience to include inspection of: Electrical Assemblies, PCBAs, Cables and Wire Harnesses, Mechanical Assemblies, Machined and Injection Molded Components. Candidate should be computer savvy and experienced with Microsoft Office programs, and Enterprise Resource Planning software (ERP) for entering product acceptance details. An understanding of International Organization for Standardization (ISO). PREFERRED QUALIFICATIONS • Experience with AS9100 Quality Management Systems Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations. Must read, write, and speak fluent English. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS None are required. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to lift, carry, push, and pull up to 60 lbs. WORK ENVIRONMENT The work environment characteristics described are representative of those an employee encounters while performing the essential functions of this job.