Quality inspector jobs in Miami, FloridaCreate job alerts

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Detail Inspector works in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden-damage, in-process and final inspections on civil aviation on aviation airworthiness directives, government and industry-standard practices, and other data acceptable to or approved by the FAA. Responsibilities: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools, and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations, and procedures established by the manufacturer of the article being inspected and must understand, speak, and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of articles maintained or altered by this repair station., • Perform disassembly and repair of all types of aircraft engine usable parts, • Assist with the reconfiguration or reconditioning of equipment, • Perform scripted test procedures to isolate the failure to sub-assembly and/or component level, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair Technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • High School or equivalent, • Hold and airframe and/or powerplant license, • Must possess exceptional attention to detail, • Basic PC knowledge, • Proficiency in working with all hand tools and pneumatic tools, • Ability to isolate failures within and a complete rework of parts and assemblies, • Ability to perform within company quality standard, • Must be legally authorized to work in the U.S, • Knowledge of troubleshooting and repair of parts and concepts preferred, • Some knowledge of troubleshooting concepts, • Ability to learn and perform basic repairs Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Job Description We are currently recruiting for a Detail Inspector job in Miami Florida. You’ll be working with a company that performs full CFM56 performance restorations, special repairs, piece parts and module repairs as well as engine exchanges and field service support globally. They are a high-performance FAA 145 / EASA Certified Repair Station and a CASE registered organization. They specialize in offering creative and cost-effective solutions for the CFM56 (-7B, -5B, -3) Engine Series by maintaining its 3 cornerstones – Custom Tailored Solutions, Extraordinary Responsiveness and World Class EGT Margins. What Is In It For You Salary: $30-$40 hour (depending on relevant experience) Benefits: Health, Dental and Vision insurance; Life insurance; Short term and long-term disability; Aflac supplemental insurance; Paid vacation and sick days; Paid holidays; 401k with employer match OUR CLIENTS STORY Our client has been established since 2009 and has had a breakthrough in the jet engine maintenance industry serving airlines, lessors, and aviation organizations worldwide. Being part of this company means having opportunities to make a difference. They are committed to Quality and continually invest in people, processes and technology in support of this. They place great priority in their employees and building up their team members. They are committed to building their employees and growing them to become great leaders. This adds tremendous value not only to their organization, but also to their community and to everyone that is touched by the passion their workforce has to offer. JOB DESCRIPTION The Inspector will follow articles in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden damage, in process and final inspections on civil aviation on aviation airworthiness directives, government and industry standard practices and other data acceptable to or approved by the FAA. ESSENTIAL JOB FUNCTIONS FOR THE DETAIL INSPECTOR POSITION IN MIAMI,FL: A Day In The Life of a Detail Inspector: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations and procedures established by the manufacturer of the article being inspected and must understand, speak and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of articles maintained or altered by this repair station., • Successfully replace failed sub-assembly, part, or component to bring failed device to working order, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • Interpret OEM manuals and routers instructions Qualifications Required • Powerplant License required, • Good written and verbal communication skills, • Knowledge of troubleshooting and repair of parts and concepts preferred, • Proficiency working with all hand tools and pneumatic tools essential, • Some knowledge of troubleshooting concepts, • Ability to isolate failures within and complete rework of parts and assemblies, • Ability to perform within company quality standard, • Ability to complete pre-defined testing and repair procedures, • Ability to learn and perform basic repairs, • Ability to read and understand routers and OEM manuals, • Language – English, business proficiency, • Experience with borescope Preferred • CFM56 experience, • Quantum aviation software experience, • Language – Spanish, business proficiency If you are interested in the Detail Inspector job in Miami, Florida apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing; LLC are those of an Employment Agency

Job Description Reports To: Chief Inspector Position Summary The Assistant Chief Inspector (ACI) is responsible for ensuring the quality and compliance of aircraft airworthiness processes. The ACI has the authority to establish and modify policies, procedures, instructions, and information related to Aircraft Airworthiness, Airworthiness Release/Logbook Entry, Required Inspection Items (RII), and Receiving Inspections, as directed by the Chief Inspector. Qualifications The Assistant Chief Inspector must: • Be qualified to exercise control over operations through training, experience, and expertise., • Hold a mechanic’s certificate with both Airframe and Powerplant ratings for a minimum of three (3) years (14 CFR 119.67(d)(1))., • Have at least three (3) years of maintenance experience on large airplanes (10+ passenger seats) with an air carrier or certificated repair station, including at least one (1) year as a maintenance inspector., • Maintain proficiency and currencyin Global Crossing Airlines’ operations through company-approved training programs, continuing education, and on-the-job functions in:, • Aviation safety standards and safe operating practices (14 CFR 119.65(d)(2)(i)), • Federal Aviation Regulations (FARs) (14 CFR 119.65(d)(2)(ii)), • Global X Airlines Operations Specifications (Ops Specs) (14 CFR 119.65(d)(2)(iii)), • Global X Airlines Manuals as required by 14 CFR 121.133 (14 CFR 119.65(d)(2)(v)) Aircraft Conformity and Airworthiness • Approve the addition or removal of aircraft from the Operations Specifications (OpSpecs) following a conformity check., • Assist in maintaining quality control over the Maintenance Ferry Flight process., • Oversee and ensure compliance with Airworthiness Release and Aircraft Logbook Entry processes., • Review, issue, and track Airworthiness Directives (ADs), repetitive inspections, planned modifications, alterations, and changes to aircraft, engines, and components., • Ensure the Minimum Equipment List (MEL) is properly maintained and updated, including Reduced Vertical Separation Minimum (RVSM) limitations per FAA Master MEL guidance., • Submit regulatory reports, including:, • Service Difficulty Reports (SDRs), • Mechanical Interruption Summary Reports (MISR), • Assist with the Aircraft Maintenance Program (AMP), ensuring compliance with regulatory requirements and FAA approval., • Evaluate Technical Operations procedures for effectiveness and recommend revisions through Management of Change (MOC) per MPP 11.12.3., • Maintain the MEL Effectivity Matrix (GCA-CL-TO-325)., • Ensure MEL Effectivityis updated when:, • A new aircraft is added to the fleet, • Supplemental Type Certificates (STCs) or Service Bulletins (SBs) are incorporated, • Assist the Chief Inspector in overseeing Quality Assurance functions and aircraft/component inspections., • Support the Required Inspection Item (RII) process, including:, • Developing and maintaining the RII List, • Oversight of vendor RII processes, ensuring compliance from Essential Maintenance Providers (EMPs), • Assist with the Continuous Analysis and Surveillance System (CASS) and its modification and improvement., • Strong knowledge of FAA regulations, airworthiness requirements, and quality assurance., • Experience in aircraft maintenance oversight and regulatory compliance., • Ability to lead and train personnel in airworthiness procedures., • Proficiency in technical report writing and regulatory submissions., • Effective decision-making and problem-solving skills.

Job DescriptionJob Title: Aviation Quality Inspector Job Description Join a dynamic distribution center focused on aircraft parts, where we operate an online platform similar to Amazon but for aviation. As a Quality Inspector, you will play a crucial role in maintaining quality control and inventory maintenance at different stages. Your primary responsibility is to ensure all incoming materials and related paperwork adhere to our Quality Management System (QMS) standards. Responsibilities • Perform visual inspections of incoming parts and materials., • Inspect and identify material and related documentation as prescribed by purchase/repair orders, highlighting any non-conformance or omissions., • Review physical attributes, quantity, and records for release., • Enter, verify, and validate data accuracy in the database., • Comply with electrostatic discharge (ESD) requirements when receiving ESD material., • Collaborate with the Quality Assurance department on continuous improvement projects., • Experience in aviation parts inspection., • Familiarity with interpreting Certificates of Conformance and Quality Manuals, • Knowledge of Dimensions and Tolerances, • Knowledge in trace documentation and the ability to trace materials back to a certified source or manufacturer., • Understanding of airworthiness release documentation (FAA 8130, EASA Form, etc.)., • Ability to interpret manuals containing dimensions and tolerances., • Focus on delivering exceptional customer service., • Flexible, responsive, and enthusiastic., • Ability to work effectively under pressure and meet tight deadlines., • Proactive attitude with a 'can-do' approach to achieving goals., • Proficiency in MS Office Suite or equivalent., • Excellent verbal and written communication skills., • Ability to liaise with all levels of the organization. Enjoy working in a clean, organized, and air-conditioned environment with a nice building atmosphere. Benefit from a cafeteria and an on-site fitness center. This position offers a 90-day contract-to-hire opportunity, allowing you to grow within a supportive company culture. Shifts available: 7am to 4pm OR 10am - 7am Please apply directly to this posting with updated resume to schedule a preliminary phone interview. Pay and Benefits The pay range for this position is $19.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Doral,FL. Application Deadline This position is anticipated to close on Oct 17, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Who are we? Polyconcept North America (PCNA) is the industry’s biggest and most diverse offering of promotional products and decoration services. At PCNA, we don’t just create products — we inspire brand experiences. Join our team and be part of a company where you can make a mark, build something meaningful, and grow in your career while helping brands leave lasting impressions. What we offer you: • Full healthcare and benefits! The health and wellness of our employees is important to us, that’s why we offer benefits including medical, vision, dental, short-term disability, and more!, • Flexible scheduling, • 401k Matching, • Generous Paid Time Off and Holidays, • We value our employee’s contributions in a collaborative and inclusive work environment, • Our culture encourages listening, understanding and a sense of empathy makes PCNA stronger, • As the industry leader for environmental responsibility, sustainability is the key to every decision we make, • Delight Customers: Treat our customers the way you’d like to be treated., • Think Team: Work together to get the job done. Be inclusive and collaborative., • Own It: Be accountable. Embrace challenges as opportunities, roll up your sleeves and make it happen., • Work Smart: Time is valuable. Focus on the things that can have the biggest impact on our business and customers. Be inquisitive and innovative Leed’s is the premier supplier of high-quality promotional products, with goods ranging from pens and drinkware to bags and mobile tech. Bullet is a leading supplier of low-price promotional products, offering deep inventory, reliable service and 24-hour turnaround. Trimark, a member of PCNA, is a leading developer and manufacturer of logo'd apparel for the Canadian and U.S. promotional industries. Trimark sells logo'd apparel across 6 different categories; Polos, T-Shirts and Tops, Woven Shirts, Knits and Fleece, Jackets, and Accessories, including Headwear. At JournalBooks, we believe in creative minds working together to create something truly unique in journals and planners. ETS has always sought to provide the very best in service, product selection, printing capabilities and competitive pricing, focused on drinkware, ETS offers a broad range of high quality drinkware categories. Spoke’s print-on-demand solutions and premium product assortment are standing by to help expand your inventory and fulfill your event and gifting needs! The Position The Quality Inspector manages tools & information used for inbound product inspections (approval samples, spec changes, PO notes, etc.), performs actual inspections & creates reports to meet AQL (Acceptable Quality Limit) standards. When problems or variances are identified, the Quality Inspector pulls supporting evidence and escalates appropriately. Key Responsibilities: • Prioritization: Review daily inbound shipments, assess needs for same-day product for customer orders & prioritize inspections appropriately, • Perform correct physical inspections on all product categories to meet AQL expectations, • Make educated determinations on product rejection or acceptance, and determine when escalation to Quality management, Product Development/Sourcing, Supply Chain, etc. is appropriate; Suggest corrective actions to issues, • Computer-based activities, • Communicate (electronic and personal) updates on product quality status to internal teams to minimize customer impact, • Read, interpret & verify all information on receiving & quality reports, including item number & color, quantity, dates, and purchase order details, • Complete and verify daily quality reports – written and computer-based – to assure product standards are met & maintained, • Achieve department performance metrics for quality, productivity, and on-time delivery, • Strong knowledge of Leed’s product categories, quality standards and expectations, • Prior experience in Quality Assurance/Control helpful (but not a requirement), • Verbal, written & math skills to understand, finish and communicate inspection results to the Quality Specialist and/or Manager in a professional manner, • Current understanding of Microsoft Excel, Outlook and Word, with the ability to learn & use PCNA system applications (FDM4), • Ability to handle multiple tasks and priorities, with variability from quick turn to tedious projects, and special attention to details, • Work well independently and as part of a team, • Excellent organizational skills & a strong sense of urgency, • High School Diploma or GED, • Bilingual in English and Spanish, • 1-2 years of related warehouse experience, • Capable of lifting 50 lbs and using dollies and pallet jacks, • Standing and walking up to 8 hours per day Together We Inspire Pride We want our team members to be proud of the essential work they do, our commitment to the sustainability, and the overall customer experience. We are a culture that will invest heavily in our people, our company and in state-of-the-art technology to be at the forefront of innovation. PCNA is an equal opportunity employer. PCNA provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics, or any characteristic applicable under state, federal and local laws. Fraud Disclaimer: PCNA is aware of recruitment scams in which individuals are falsely claiming to represent our company and/or our employees. All legitimate communication from PCNA will come from our Applicant Tracking System, LinkedIn Recruiter, or a verified PCNA email address ending in @pcna(.)com. We do NOT conduct interviews via instant messaging platforms like Skype or request sensitive personal information early in the hiring process. If you receive a message that seems suspicious, we recommend verifying its legitimacy and immediately reporting any fraudulent activity.

Job Description Job Posting Title: QC Inspector, Heavy Maintenance Reports to: Manager, Quality Control Overview: The QC Inspector – Heavy Maintenance ensures compliance with Global X’s Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role is responsible for inspections, surveillance, and audits of heavy maintenance activities to ensure aircraft airworthiness prior to release. The inspector serves as the on-site Quality representative during heavy maintenance events and collaborates closely with vendor personnel, Maintenance Control, and Engineering teams. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Perform Line Maintenance, Remain Over Night (RON), and Receiving Inspections (RI)., • Monitor maintenance work, workmanship, and materials to ensure compliance with Global X procedures and FAA regulations., • Conduct Required Inspection Item (RII) in-process inspections and review related documentation., • Audit completed aircraft records (e.g., logbook pages, work cards, non-routines, engineering documents)., • Oversee Heavy Maintenance or Special Maintenance visits., • Perform Borescope inspections when qualified., • Review and approve work documents for accuracy and completeness., • Record discrepancies in logbooks and non-routine forms., • Provide “buy-back” of RII and non-RII maintenance actions., • Approve return-to-service for maintenance, preventive maintenance, and alterations., • Issue airworthiness releases (AWR)., • Reject unsatisfactory work and non-conforming parts during inspection., • Prepare and issue audit reports identifying risks, corrective actions, and compliance gaps., • Conduct inspections and audits of contractors, repair vendors, overhaul services, fueling, deicing, and parts suppliers., • Follow all company and safety regulations to maintain a safe work environment., • Valid FAA Airframe & Powerplant (A&P) license held for at least 5 years., • Proficiency with TRAX maintenance software., • Documented inspection experience, including RII Authorization., • Preferred: prior experience with NDT methods (Liquid Penetrant, Eddy Current, Borescope)., • Strong analytical, problem-solving, and communication skills., • Experience with aircraft parts and materials handling. WORK LOCATION AND SCHEDULE: This is a full-time, salaried position based at our Miami base. The QC Heavy Maintenance Inspector will travel regularly to vendor facilities and maintenance sites where heavy checks are performed. The role requires flexibility in scheduling, including evenings, weekends, and holidays, to support operational needs. Travel may be domestic or international depending on where heavy maintenance events are conducted. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 25 pounds and occasionally lift and move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description CEI Senior InspectorPosition Overview KEITH is seeking a CEI Senior Inspector to join our team. This role involves performing highly complex technical assignments in field surveying and construction layout, making and checking engineering computations, inspecting construction work, and conducting field tests. The CEI Senior Inspector will also be responsible for coordinating and managing lower-level inspectors. Work is performed under the general supervision of the Project Engineer/Administrator. Key Responsibilities: • Conduct detailed inspections of bridge and roadway construction projects (excluding Complex Category 2 (CC2) bridge structures)., • Perform field surveying and construction layout tasks, ensuring compliance with plans, specifications, and applicable regulations., • Perform and verify engineering computations and field tests related to construction materials and quality control., • Manage, coordinate, and provide guidance to lower-level inspectors., • Ensure that all work aligns with FDOT standards and project requirements., • Document inspection findings and prepare reports for project oversight.Preferred Certifications:, • CTQP Drilled Shaft Inspection Certification, • IMSA Traffic Signal Technician Level I Certification., • CTQP Concrete Field Inspector Level I Certification, • CTQP Asphalt Paving Level I & Level II Certifications, • CTQP Earthwork Construction Inspection Level I & Level II Certifications, • CTQP Final Estimates Level II Certification, • FDOT Advanced Temporary Traffic Control (TTC) Certification, • Nuclear Radiation Safety Certification, • Florida Stormwater, Erosion, and Sedimentation Control Inspector Training and CertificationWhat you'll need:, • High school diploma or equivalent., • At least five (5) years of experience in construction inspection., • At least two (2) years of experience in bridge and/or roadway construction inspection., • Strong knowledge of FDOT construction standards and specifications., • Experience working with contractors and engineers to resolve field-related issues., • Strong organizational and leadership skills., • 100% PAID Medical, Dental, and Vision, • Employer matched 401K - 100% Vested on Day 1 of contribution!!!, • Paid Parental leave and Life Insurance, • PTO, Holidays, and more! ... Powered by JazzHR AnvBSjT4X7

Job Description For almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. We're actively seeking a Quality Inspector- FAI for an immediate opening in Maimi, FL. The role is full-time, Monday through Friday. Key responsibilities: • Report to the team leader daily in an office/shipping environment., • Complete First Article Inspections ensuring accurate and complete reports., • Complete FAI reports and reach out to suppliers to correct errors., • Operate within client Quality Management System (QMS)., • Reach out to suppliers and determine the best course of action with escapements., • First Article Inspection Experience (FAI), • Strong attention to detail and adherence to inspection plans and protocols., • Ability to interpret basic engineering drawings., • Proficient in Microsoft Office with strong communication skills., • Experience with AS9102 Form 1,2,3., • GD&T (Geometric Dimensioning and Tolerancing) per ASME Y14.5 standards., • Fluent in reading and writing English., • Must be able to meet ITAR requirements and undergo a background check, • Certified or previously certified in GD&T ASME Y-14.5, • Diploma or GED from an accredited high school or technical school; college degree in engineering, • Knowledge of mechanical contract manufacturing and LEAN manufacturing Must be ITAR compliant and undergo a background check. Company DescriptionSQA Services is a leading Supply Chain and Quality Assurance consulting firm specializing in the management of Supplier Audit, Quality Engineering, Inspection, and Remediation programs in the Aerospace/Defense, Semiconductor, Medical Device, Pharmaceutical, Cosmetic, and Automotive manufacturing industries. Clients leverage our network of quality professionals in more than 50 countries as an extension of their own supplier quality teams.SQA Services is a leading Supply Chain and Quality Assurance consulting firm specializing in the management of Supplier Audit, Quality Engineering, Inspection, and Remediation programs in the Aerospace/Defense, Semiconductor, Medical Device, Pharmaceutical, Cosmetic, and Automotive manufacturing industries. Clients leverage our network of quality professionals in more than 50 countries as an extension of their own supplier quality teams.

Job Description We are currently recruiting for a Detail Inspector job in Miami Florida. You’ll be working with a company that performs full CFM56 performance restorations, special repairs, piece parts and module repairs as well as engine exchanges and field service support globally. They are a high-performance FAA 145 / EASA Certified Repair Station and a CASE registered organization. They specialize in offering creative and cost-effective solutions for the CFM56 (-7B, -5B, -3) Engine Series by maintaining its 3 cornerstones – Custom Tailored Solutions, Extraordinary Responsiveness and World Class EGT Margins. What Is In It For You Salary: $30-$40 hour (depending on relevant experience) Benefits: Health, Dental and Vision insurance; Life insurance; Short term and long-term disability; Aflac supplemental insurance; Paid vacation and sick days; Paid holidays; 401k with employer match OUR CLIENTS STORY Our client has been established since 2009 and has had a breakthrough in the jet engine maintenance industry serving airlines, lessors, and aviation organizations worldwide. Being part of this company means having opportunities to make a difference. They are committed to Quality and continually invest in people, processes and technology in support of this. They place great priority in their employees and building up their team members. They are committed to building their employees and growing them to become great leaders. This adds tremendous value not only to their organization, but also to their community and to everyone that is touched by the passion their workforce has to offer. JOB DESCRIPTION The Inspector will follow articles in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden damage, in process and final inspections on civil aviation on aviation airworthiness directives, government and industry standard practices and other data acceptable to or approved by the FAA. ESSENTIAL JOB FUNCTIONS FOR THE DETAIL INSPECTOR POSITION IN MIAMI,FL: A Day In The Life of a Detail Inspector: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations and procedures established by the manufacturer of the article being inspected and must understand, speak and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of articles maintained or altered by this repair station., • Successfully replace failed sub-assembly, part, or component to bring failed device to working order, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • Interpret OEM manuals and routers instructions Qualifications Required • Powerplant License required, • Good written and verbal communication skills, • Knowledge of troubleshooting and repair of parts and concepts preferred, • Proficiency working with all hand tools and pneumatic tools essential, • Some knowledge of troubleshooting concepts, • Ability to isolate failures within and complete rework of parts and assemblies, • Ability to perform within company quality standard, • Ability to complete pre-defined testing and repair procedures, • Ability to learn and perform basic repairs, • Ability to read and understand routers and OEM manuals, • Language – English, business proficiency, • Experience with borescope Preferred • CFM56 experience, • Quantum aviation software experience, • Language – Spanish, business proficiency If you are interested in the Detail Inspector job in Miami, Florida apply today! This vacancy is being advertised by Total Aviation Staffing, LLC. The services advertised by Total Aviation Staffing; LLC are those of an Employment Agency

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Quality Apprentice will work closely with experienced technicians, inspectors, and engineers to learn and develop skills related to the repair of aircraft engines. This hands-on apprenticeship provides the opportunity to gain practical experience, technical knowledge, and professional skills while adhering to safety standards and company procedures. As a Junior Quality Inspector, you will work on improvement projects for the Quality and Inspection teams and assist with various tasks, including parts inspection, tool review and management, kitting, and routine maintenance, while working toward an opportunity to become a Level 1 Inspector or Quality Coordinator within FTAI Aviation. The role requires a level of independence and proactivity while working on specific projects, as well as a strong willingness to learn, attention to detail, and the ability to follow instructions in a fast-paced and safety-conscious environment. Responsibilities: • Perform general inspection, under the guidance of experience Inspectors, of raw materials, in-process components, and finished products to ensure compliance with industry standards., • Support the documentation and management of quality records, including non-conformance reports, corrective actions, and inspection reports., • Perform scripted repair procedure to repair and functionally test parts or tools., • Assist Repair technicians/Engineers/Technical Services/Inspectors as required., • Audit repair documentation for accuracy and completion., • Maintain constant adherence to inventory control practices and procedures., • Interpret OEM manuals and routers instructions., • Work closely with experienced technicians, engineers, inspectors, and supervisors to develop technical expertise., • Maintain a clean and organized work environment daily, ensuring tools and equipment are properly maintained and stored at the end of shifts., • Help with the issuance and filing of documentation of work performed inside of ERP system (Quantum)., • Ad-hoc tasks required for the proper functioning of the shop., • Lead and complete special projects as needed. Qualifications: • High School Diploma or equivalent, • Basic Computer skills (i.e. Microsoft Office Suite), • Mechanical aptitude and willingness to learn., • Ability to read and interpret technical manuals and schematics., • Attention to detail and commitment to safety., • Good problem-solving and teamwork skills., • Self-motivated and reliable., • Proactivity in finding and addressing Quality and Inspection needs., • Proficiency working with hand tools., • Ability to perform within company quality standard, • Must be legally authorized to work in the U.S, • Must be fluent in English (written and verbal) Preferred: • Knowledge of troubleshooting and repair of parts and concepts., • Ability to read and understand routers and OEM manuals., • Basic knowledge of aircraft engines and mechanical systems. Career Path & Opportunities: Successful trainees may advance to: • Level 1 MRO/ETC Technician, • Detailed/Surveillance Inspector, • Materials Coordination, • Records Clerk, • Supply Chain / Warehouse Associates Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws.

Job DescriptionDescription: Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities • Preparation of the QC Labeling areas as specifically described in SOPs., • Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements., • Combines components for final products., • Applies labels to final product and adds package inserts, boxes, etc., • Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature)., • Performs disposition of nonconforming products as directed., • Coordinates and stages products for sterilization., • Monitors freezers and responds to alarms., • Supports nonconformance investigations, when applicable., • Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue., • Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues., • Performs other duties as assigned by management. Requirements: Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

Job Description ABOUT FTAI AVIATION LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI’s propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Detail Inspector works in accordance with the current technical data provided in the manufacturer’s instructions for continued airworthiness service bulletins, service letters for performing preliminary hidden-damage, in-process and final inspections on civil aviation on aviation airworthiness directives, government and industry-standard practices, and other data acceptable to or approved by the FAA. Shift Schedule: 2:30pm - 11:00pm Responsibilities: • Ensuring that they are thoroughly familiar with the inspection methods, techniques, aids, tools, and equipment used within their assigned area of responsibility., • Maintaining proficiency in using the inspection aids in their assigned area of responsibility Understanding the current specifications involving inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Ensuring that the inspection tools and equipment, including inspection aids, used to perform inspections are in proper working order and the proper calibration information is affixed., • Understand the current specifications involving inspection tolerances, limitations, and procedures established by the manufacturer of the article being inspected and must understand, speak, and write the English language., • Ensure all inspections are properly performed and recorded, and all records are properly executed before final approval for return to service of articles maintained or altered by this repair station., • Perform disassembly and repair of all types of aircraft engine usable parts, • Assist with the reconfiguration or reconditioning of equipment, • Perform scripted test procedures to isolate the failure to sub-assembly and/or component level, • Perform scripted repair procedure to repair and functionally test part or product, • Assist Repair Technicians/Engineers/Technical Services as required, • Maintain constant adherence to inventory control practices and procedures, • High School or equivalent, • Hold and airframe and/or powerplant license, • Must possess exceptional attention to detail, • Basic PC knowledge, • Proficiency in working with all hand tools and pneumatic tools, • Ability to isolate failures within and a complete rework of parts and assemblies, • Ability to perform within company quality standard, • Must be legally authorized to work in the U.S, • Knowledge of troubleshooting and repair of parts and concepts preferred, • Some knowledge of troubleshooting concepts, • Ability to learn and perform basic repairs Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. Shift schedule: 2:30pm-11:00pm

Job Description GA Telesis is a global leader providing integrated solutions to the aviation and aerospace industries. We serve over 2,000 customers, including airlines, original equipment manufacturers, maintenance, repair, and overhaul (MRO) providers, and suppliers worldwide, with 31 leasing, sales, distribution, and MRO operations in 19 countries. At GA Telesis, our core business is integrated aviation solutions, and our mission is customer success. The Quality Control Inspector plays a key role in maintaining high-quality standards while complying with company processes at our Component facility in Miami. This position is responsible for performing incoming and outgoing inspections of aircraft parts and materials, along with required production procedures. Reporting to the Director of Quality and Engineering, the ideal individual will be quality-oriented, attentive to detail, self-motivated, reliable, able to multi-task and to perform each essential duty satisfactorily to meet quality product expectations. Responsibilities: • Conduct a complete vision inspection of all incoming parts and materials, including inspecting items being shipped, • Ensure products meet company standards before they are sent out or placed on the inventory shelves, • Handling material with necessary precaution and in accordance with requirements for safe handling, • Review material specifications to compare to inventory parts, • Ensures production and processes adhere to standards with legal requirements, • Accomplishes quality and organization mission by completing related results as needed, • Inspects in-process production by confirming specifications, conducting visual inspection, and communicating required adjustments to the production department, • High School diploma or GED equivalent, • Airframe and Powerplant License required, • 1-2 yrs. Quality Control Inspector experience, • Familiar with ATA106 and ATA300 Specifications, • Familiar with ISO9001, AS9120 and ASA-100 standards, • Familiar with procedures for completion of ATA106 certificate, • Familiar with procedures for Maintenance Release certificates such as 8130’s, EASA Form One, Canadian Form one, etc., • Basic knowledge of Microsoft Office (Word, Excel, and Outlook) as well as basic mathematical skills, • Must be able to communicate effectively (oral and written), • Familiar with Quantum Software, • Ability to handle multiple projects simultaneously in a fast-paced environmentCome check out how #gatelesis is "Intelligently Defining the FUTURE of Aviation and Aerospace" To see what #GATelesis life is like, visit LinkedIn, Instagram, Facebook. Powered by JazzHR 0jEcJCTbaB

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: Miami, FL Job Type: Full-Time and Part-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job Description Level 2 - Mechanical Inspector For almost 30 years, SQA Services has been a premier leader in providing managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. Key Responsibilities: • Conduct visual, physical, and dimensional inspections (in-process, incoming, final and witness inspections) of machined parts, in accordance with project specifications and requirements., • Compile final inspection sign-off sheets and inspection packages., • Verify that inspection equipment can detect defects and ensure inspection methodology is in line with drawing intent., • Review and validate the justification for parts not inspected at final inspection., • Document non-conformances using approved methods and submit non-conformance reports for customer disposition., • Previous mechanical inspection experience., • Experience with AS9102 (FAI)., • Knowledge of GD&T and inspection methodologies., • Strong attention to detail and ability to follow inspection plans and protocols., • Experience with the use of precision measurement tools and equipment., • Ability to read and interpret blueprints and/or engineering drawings, • Over 3 years of mechanical parts inspection experience This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. Company DescriptionSQA Services is a leading Supply Chain and Quality Assurance consulting firm specializing in the management of Supplier Audit, Quality Engineering, Inspection, and Remediation programs in the Aerospace/Defense, Semiconductor, Medical Device, Pharmaceutical, Cosmetic, and Automotive manufacturing industries. Clients leverage our network of quality professionals in more than 50 countries as an extension of their own supplier quality teams.SQA Services is a leading Supply Chain and Quality Assurance consulting firm specializing in the management of Supplier Audit, Quality Engineering, Inspection, and Remediation programs in the Aerospace/Defense, Semiconductor, Medical Device, Pharmaceutical, Cosmetic, and Automotive manufacturing industries. Clients leverage our network of quality professionals in more than 50 countries as an extension of their own supplier quality teams.

Job Description GA Telesis is a global leader providing integrated solutions to the aviation and aerospace industries. We serve over 2,000 customers, including airlines, original equipment manufacturers, maintenance, repair, and overhaul (MRO) providers, and suppliers worldwide, with 31 leasing, sales, distribution, and MRO operations in 19 countries. At GA Telesis, our core business is integrated aviation solutions, and our mission is customer success. The Quality Control Receiving Inspector plays a key role in maintaining high-quality standards while complying with GA Telesis processes. Reporting to the Senior Manager of Quality Control and Projects, the ideal individual should be quality-oriented with attention to detail, self-motivated, reliable, and able to multi-task, to perform each essential duty satisfactorily to meet quality product expectations. This is a full-time position, 2nd shift, based in Medley, Florida. Responsibilities: • Perform detailed visual, dimensional, and non-destructive inspections (NDI/NDT) of landing gear components and assemblies., • Inspect incoming, in-process, and final products to ensure compliance with OEM manuals, work instructions, and regulatory standards., • Verify documentation including repair orders, service bulletins, airworthiness directives, and traceability paperwork., • Accurately record inspection findings, discrepancies, and corrective actions taken., • Conduct audits and quality checks throughout the repair process., • Collaborate with engineering and production teams to resolve quality issues and improve processes., • Accomplishes quality and organization mission by completing related results as needed, • Maintain calibration status of measuring tools and test equipment., • Support internal and external audits, including FAA and customer inspections., • High School diploma or GED equivalent required., • 1-2 years Quality Control Inspector experience., • Strong understanding of FAA regulations (14 CFR Part 145), EASA requirements, and OEM maintenance manuals., • Basic knowledge of Microsoft Office (Word, Excel, and Outlook) as well as basic mathematical skills., • Must be able to communicate effectively (oral and written) ., • Detail-oriented with strong documentation and communication skills., • Ability to read and interpret blueprints, technical drawings, and specifications., • Familiar with Quantum Software., • Previous experience with aviation components, wheels and brakes a plus., • Ability to handle multiple projects simultaneously in a fast-paced environment.Come check out how #gatelesis is "Intelligently Defining the FUTURE of Aviation and Aerospace" To see what #GATelesis life is like, visit LinkedIn, Instagram, Facebook. Powered by JazzHR eyB658RJHh

Job DescriptionSalary: POSITION SUMMARY Oversee the scheduling, coordination, and execution of field crew activities. Supervise and coordinate onsite field operations and associated Subcontractors and Vendors. Provide input towards the development of the project schedule. Adhere to the project schedule and orchestrate timely project completion within budget. Cooperate with the Project Manager and maintain open lines of communication regarding matters concerning Safety, Project budget, Productivity, Change Orders, Quality Control, and Customer Satisfaction. ESSENTIAL FUNCTIONS Reasonable Accommodations Statement Oversee all aspects of mechanical (fuel) related projects, including installation, modification, and demolition of fuel underground/aboveground tanks and large/small diameter piping, hydrant fuel piping, hydrant pits, drain downs, pigging, flushing, and civil related aspects of projects, including concrete demolition and placement and dewatering; Essential Functions: • Develop a Master Plan approach for the project., • Execute, supervise, and maintain project manpower, milestone schedules, and material orders., • Practice, promote, and develop mentoring of all trades and manpower levels., • Enforce and implement the dictates and recommendations of the EHS Department., • Complete all documentation required in the Health and Safety Plan., • Consider and implement all EHS Requirements in the Planning and Coordination Phases., • Document and ensure any required corrective measures are addressed and implemented., • Review all daily and weekly scope of work activities with the Project Managers., • Requisition, maintain, and account for tools, materials, and equipment with Fleet and Project Management., • Monitor progress, performance, and quality of work for all Subcontractors and major Equipment Suppliers., • Coordinate all required inspections with the Project Foreman and maintain good working relationships with inspectors., • Review, analyze, and update Labor Hours/Job Costs Report information with project management on a weekly basis., • Optimize project opportunity by field/pre-fabrication planning, BIM, organizing, and scheduling, without compromising the quality, safety, or completion date of the project., • Assist project management with schedule preparation, including logic and resource/budget allocation, Labor Resource Charts, and provide updates as required., • Keep proper and complete documentation of the project as required and available for inspection at all times., • Provide required training, mentoring, coaching, and leadership for field personnel. Participation in company-provided training., • Ensure accurate and complete cost coding of all time cards daily. Review, sign off, and forward time cards to the corporate office as required., • Oversee all tradesmen at the project site, including, but not limited to, Pipefitters, Welders, Heavy Equipment Operators, General Construction personnel, Environmental technicians, and all Subcontractor personnel (Electricians, Start-up technicians, etc.), • Ensure efficient project closeout, including completion of all punch list work, owner training and instruction, transfer of spare parts, final cleanup, As-Built plans, demobilization, and project records archiving. POSITION QUALIFICATIONS Competencies: • Strong written and oral communication skills., • Ability to understand Contract plans and specifications., • Ability to perform accurate estimating and takeoffs for mechanical/civil systems., • Strong organizational skills and habits, • Positive attitude and ability to work in a high-paced environment., • Ability to solve problems and present solutions., • History and ability to maintain high attendance and punctuality., • Traffic Control and work at Airports and Federal Government Facilities is a Plus, • Knowledge of Proper Use of Survey Equipment SKILLS & ABILITIES Education: • High school graduation or equivalent required. Experience: • Minimum 5 years of previous experience in this position. Computer Skills: • Computer literate with good working knowledge of Microsoft Word and Excel., • Complete Daily reports / JSAs / Toolbox meeting, • Ability to send and receive email., • Ability to complete online time reporting, including preparation of Certified Payroll sign-in., • Handle and transmit Project Photos on a scheduled basis., • Ability to complete online training Certificates & Licenses: • OSHA 30-HOUR Construction, • OSHA 40-HOUR HAZWOPER, a plus, • Florida Advanced Traffic Control Supervisor, a plus, • Florida Stormwater Inspector, a plus, • NCCER Accreditation desired, • FDOT CTQP Certifications as applicable Other Requirements: • Drivers License, • Competent Person Lockout/Tagout, Confined Space, and Trenching and Excavation procedures in a safe manner., • Identify safety hazards you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards PHYSICAL DEMANDS • Hearing and vision within normal ranges are essential for normal conversations, receiving ordinary information, and preparing, inspecting, or reviewing documents., • Frequent walking and climbing (stairs, ladders, terrain), • Frequent lifting (up to and including 50 pounds), • Frequent bending, twisting, and standing, • Exposure to working outdoors in all-weather conditions, • Ability to work more than 40 hours in any given week, including weekend assignments as required Other Physical Requirements: Must wear steel-toed boots, must wear protective eye-wear, hearing protection, may work in outdoors during inclement weather, ability to travel by car or plane, high frequency of computer keyboarding, high frequency of viewing a computer monitor, etc. WORK ENVIRONMENT Work is performed in outdoor settings and industrial settings, in all weather conditions, including temperature extremes, during the day and night shifts. Work is often performed in emergency and stressful situations. This job description is subject to change at any time.

Job Description TITLE: Manager Quality Control REPORTS TO: Director, Quality Control & Chief Inspector OVERVIEW: Monitor the performance measures of the CAMP by performing audits of internal and vendor organizations. The Quality Assurance Auditor is responsible for performing audits as required by Federal Aviation Regulations (FAR) 121.373. The Auditor performs reviews and audits internal programs and external business partners’ facilities as well as their policies and procedures. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: • Monitor maintenance, workmanship, and materials to verify compliance with the applicable approved published procedures of GlobalX and FAA rules, regulations, and standards., • Audit completed aircraft records (e.g., logbook pages, work cards, non-routines, Engineering documents (EO’s, EAs, etc.) and other related documents) generated by C-Check, RON, and Line maintenance., • Ensure accuracy and completeness of all assigned work documents and records., • Prepare and issue audit reports regarding the hazards and risks found during audits of the CAMP and identify required corrective actions needed to transfer, eliminate, accept, and/or mitigate these risks and monitor progress toward completion of these actions., • Perform inspections and audit contractor activities in support of CAMP required at Line Stations, including vendors of repair and overhaul services, contract maintenance, deicing services, fueling services, and parts distributor., • Follow all safety rules and regulations to maintain a safe working environment for all employees., • Assist Quality Department with continuous improvement projects and duties as needed., • Plan, schedule, and conduct internal and external audits for the following: Line Station, Fuel Farm, Fuel Into-Plane, Essential Maintenance (Operations Spec D91), Repair Station. SKILLS AND QUALIFICATIONS: • High School Diploma or General Education Development (GED) Diploma., • Previous auditing experience in the 121 Air Carrier or Military Department of Defense (DOD) auditing environment., • Superior analytic, problem solving and communication skills., • Previous experience with aircraft parts and materials handling., • Thorough working knowledge of Federal Aviation Regulations., • Available for occasional overnight travel. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Position: Certified Welding Inspector (CWI) Location: Miami/Ft. Lauderdale (16200 NW 59th Ave. Ste. 106 I Miami Lakes, FL 33014) Interview Process: 9/30 2-4pm; 10/3 10-12pm Must haves: • Minimum of 2-4 years' experience as an Engineering Technician or similar experience, • CWI certification, • HS Diploma, • 1+ years in construction inspection, • Associates degree or higher in Civil Engineering or Construction Engineering Technology, • NDT - nondestructive testing certification is a huge plus Insight Global is seeking a Certified Welding Inspector to sit in Miami, Florida for a growing and profitable office situated in a rapidly growing region. Key responsibilities will include daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications. Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc. Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications. Prepare inspection reports and provide written documentation of observations and testing materials. Communicate findings to the engineer or project manager and when requested collaborate with the project team on solutions to potential issues. Adhere to strict safety standards.

Job Description JOB SUMMARY: The responsibility of the Quality Assurance Inspector is to receive, inspect, approve, release all manufactured products at Custom Veterinary Services. BENEFITS: Full benefits offering to include medical, dental, vision and life with competitive paid time off. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Follows Quality Control Manager’s direct instructions., • Follows all cGMP’s and SOP’s., • Works closely with Planning and Production., • Inspects Incoming (as required) and Outgoing trucks., • Issues Label Deviations based on information received from Production Planning when required., • Helps in EMP (Environmental Monitoring Program) sampling. Prepares samples and documentation (Chain of Custody) for machinery, equipment, rooms, personnel, and other facility items., • Participates in other Quality activities as needed., • Heavy lifting at times, exceeding 40 pounds., • Proactively manage safety by ensuring compliance with all Federal and State regulations and internal Company policies., • Ensure unsafe conditions are corrected in a timely manner., • Incumbent may be asked to provide other duties as assigned. KNOWLEDGE & SKILLS: • GMP’s (Good Manufacturing Practices) in Pharma, Food or Cosmetic industry a plus., • Computer literate., • Bi-Lingual in English and Spanish preferred., • Commitment to lifelong learning., • Strong detail and organization orientation., • Ability to act with a sense of urgency without compromising quality., • Must be able to lift packages under 40 pounds occasionally. EDUCATION AND EXPERIENCE: • High School Diploma or equivalent a minimum., • Control & Issuance in Pharma, Food or Cosmetic industry a plus. WORK ENVIRONMENT/PHYSICAL DEMANDS • A mix of Office and Facility (Plant) Environment at single manufacturing facility., • Required to sit and type on a keyboard occasionally., • Walking required during the day., • Heavy lifting at times, not exceeding 40 pounds.

Job Description Salary Range: $61K - 73K Location: Miami, Ft. Lauderdale, WPB Position: Construction Engineering and Inspection (CEI) - Engineering Intern ESSENTIAL FUNCTIONS: • Performs inspection assignments in assisting Senior Inspectors in the performance of their duties. Must also currently have or be willing to obtain the following certifications, as a minimum, within twelve (12) months of hire: Florida Department of Transportation’s (FDOT’s) Construction Training Qualification Program (CTQP) • CTQP Concrete Field Inspector Level I, • CTQP Final Estimates Level I, • CTQP Asphalt Roadway Level I, • CTQP Earthwork Construction Inspection Level I, • CTQP Pile Driving Inspection, • International Municipal Signal Association (IMSA) Traffic Signal Inspector Level I, • FDOT Intermediate Maintenance of Traffic (MOT), • Nuclear Radiation Safety, • Valid Driver’s license required., • Able to read engineering drawings and system maps., • Able to understand and follow contractor schedules., • Able to carry 40 pounds (testing equipment)., • Able to stand and sit as needed on project work sites, climb ladders, work at heights, and work outdoors in a wide range of weather conditions, periodic weekend and night work may be required., • Able to safely navigate construction work sites with uneven terrain. EAC Consulting, Inc. (EAC) is looking for a CEI Inspector - Engineering Intern to join our team for an upcoming project, in our Miami office. EAC is a trusted firm for infrastructure solutions that advance communities through innovation and resilience. Our full-service capabilities include planning, design, construction management and program management within transportation, site development, utilities, water/wastewater, airports and seaports. At EAC, we thrive by collaborating as one unified team and offer an inspiring work environment. We live our core values, delivering exceptional client service and cutting-edge engineering. Move your career forward working with EAC’s highly talented industry professionals who enhance quality of life through engineering excellence! EAC offers: • Competitive compensation, • Participation in EAC's bonus program, • Medical, Dental, and Vision insurance, • Health Maintenance Subsidy, • Life, AD&D Short Term and Long-Term Disability insurance, • 401k – competitive company contribution

Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. Work within the Quality Management system and undergo basic training on policies and procedures. Ability to work effect

Job Description Who We Are? For over two decades, The Falcon Group’s mission has been to understand our client’s variety of needs, while keeping to their anticipated budget and exceeding their desired results. The Falcon Group’s services include Architectural Services and Civil, Structural, Construction & MEP Engineering Services, and much more. The Team At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Our Restoration Division focuses on the design of repairs, renovations, alterations of existing structures and oversee & documenting their execution in the field. We perform condition assessments, investigations, quality control inspections, feasibility studies, and peer reviews. SUMMARY: We have an immediate opportunity for a Construction Project Manager for our Owner Representative/Project Management Division in our Miami, FL location. We are looking for a candidate with experience in identifying critical issues relevant to a project’s success from pre-construction planning and procurement through project execution and close-out. The ideal candidate will provide insight into processes that improve project performance, analyzing estimates, budgets, schedules, contracts, control systems, and then integrating those pieces into an efficient whole to support successful project completion. DUTIES & RESPONSIBILITES: • Ensuring the successful completion of project objectives on-time and within budget., • Attend Condominium Board and Association membership meetings to discuss details of projects as well as coordinating meetings with contractors and design professionals., • Prepare and present comprehensive presentations to convey all project related information to the Condominium Board and Community., • Prepare and track agendas, minutes, and action items for all project-related meetings., • Produce regularly scheduled communications in the form of weekly updates and monthly progress reports to convey all project related information to Board and Community., • Prepare and deliver Requests for Proposals for the solicitation of all project participants as well as analyze Proposals solicited from all project participants., • Review all project construction contracts and provide feedback and recommendations., • Review/analyze all deliverables including project plans and specifications, shop drawings, material spec books, contractor submittals, etc., and provide feedback and recommendations to maximize design and cost efficiencies and avoid delays and deviations from the client’s anticipated project outcome., • Prepare detailed overall project schedules, budgets, cashflow budgets, and pay app/invoice tracking sheets to properly track and project all project-related financials., • Perform monthly budget and schedule reconciliation exercises to maintain up-to-date financials and timelines associated with the project., • Perform site inspections to ensure quality workmanship and compliance with contractual obligations., • Lead weekly Owner/Architect-Engineer/Contractor meetings and provide solutions to potential issues related to the project. SUPERVISORY RESPONSIBILITIES: This position entails no supervisory responsibilities. QUALIFICATIONS: Education • In lieu of education a minimum of three years of experience in an architectural and engineering consulting firm, construction administration or similar field., • Experience in building/maintaining construction schedules, budgets, etc., • Valid United States Driver’s License required, as this position requires travel to and from client sites., • General Contractor License preferred, • Knowledge of construction delivery methods, processes, and agreements, • Familiarity with construction best practices and general building codes and permitting processes., • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets. Lifting • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%). Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR JExddM1SR7