Trabajos quality inspector en Seattle, WashingtonCrear alertas

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing is seeking an Aviation Maintenance Technician and Inspector , who holds an active secret or higher security clearance, to perform maintenance, preventative maintenance and alterations on production during and post flight test activities in support of our KC-46 Tanker in Tukwila, WA . Position Responsibilities: Troubleshoot, inspect, test, repair, service aircraft and engine systems to prepare aircraft for flight. Perform Quality functions such as Customer and DCMA Coordination, Configuration Change Verification, Conformity Inspections, Airworthiness Inspections (including Pre-flight and Post-flights), Corrective Action and Investigations. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures. Perform Aviation Maintenance Technician Inspector tasks in order to obtain and maintain knowledge, skills and required certifications. Initiate and document any nonconforming materials, hardware, software, tools, parts, assemblies, or portions thereof, according to specifications, processes, and procedures. Perform audit/surveillance of all manufacturing and quality assurance processes, according to specifications, processes, and procedures. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position requires an Active Secret U.S. Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.) Basic Qualifications (Required Skills/Experience): Minimum 3 years of aircraft maintenance experience with military, airline or certificated repair station background. This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations. Must be able to work any shift and overtime as required Preferred Qualifications (Desired Skills/Experience): Prefer a valid FAA Airframe and Powerplant Certificate preferred. Please note your certificate number on your resume if you are certified. Preferred experience in and/or education in Flight Controls, Avionics electronics/systems, and Analysis. Prior military experience and working with military customers Relocation: This position offers relocation based on candidate eligibility. Shift: This position is for 2nd shift (Subject to change) Additional Information: This is an hourly position governed by the International Association of Machinist (IAM-751) Collective Bargaining agreement. Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards Statement: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $35.32/hr. - $62.45/hr. Candidates must before March 27th, 2026 to be considered for the position Applications for this position will be accepted until Sept. 30, 2026 Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Type of Requisition: \n \nRegular\n \n Clearance Level Must Currently Possess:\n \nNone\n \n Clearance Level Must Be Able to Obtain:\n \nNone\n \n Public Trust/Other Required: \n \nNone\n \n Job Family:\n \nSCA\n \n Job Qualifications: \n \n Skills:\n \nElectrician, Ship Building, Shipyards\n Certifications:\n \nNone\n Experience:\n \n3 + years of related experience\n US Citizenship Required:\n \nYes\n \n Job Description:\n \n \nENGINEERING TECHNICIAN IV\n \n This is a waterfront shipboard construction and re-modernization position, working within shipyards and drydocks onboard U.S. Naval ships. The incumbent will be working in varying temperatures of high heat in the summer and cold in the winter preforming the following tasks:\n \n \nJob Description\n \n \n1. Installs, maintains, repairs, overhauls, troubleshoots, modifies, constructs and tests various types of electrical, electronic, and/or mechanical equipment and related devices.\n \n2. Applies technical knowledge of electronics principles in order to put equipment in operational condition and solve complex problems.\n \n3. Troubleshoots and corrects malfunctions using specialized test and diagnostic equipment.\n \n4. Modifies circuitry to improve performance.\n \n5. Makes recommendations for improvements or modifications to correct problems.\n \n6. Provides operation/maintenance instruction to customer personnel.\n \n7. Prepares operating and malfunction reports and related documentation.\n \n8. Works with engineering staff to determine and solve equipment design problems.\n \n9. Performs quality assurance testing of assemblies and equipment fabricated by other technicians.\n \n10. Provides work leadership to less-experienced technicians.\n \n11. Maintains current knowledge of relevant technologies as assigned.\n \n12. Participates in special projects as required.\n \n \n13. Installation and maintenance of a Fiber Optic cables onboard naval ships.\n \n \n14. Splice and Terminate fiber optic cables.\n \n \n15. Perform fiber tests: OTDR, power meter/laser source, and scopes.\n \n \nRequired Certifications: \n \n \n Cableway Certified, Connertor Certified Modular, COAX, Multi-Pin, Connector Fabricator and Inspector, Connector Trained and Qualified with 40 hours OJT.\n \nFiber Optic Cable Handling, Pulling, Forming/Shaping, BOF, Single/Multi, Optical Testing, Fusion Splicing \n \nSupervisor & QA, BOF Licensed Installer. WAF Tagout qualified. \n \n \nWHAT YOU'LL NEED TO SUCCEED:\n \n• Education: Associates of Arts/Associates of Science.\n \n• Required Experience: 5+ years of related experience.\n \n• Security Clearance Level: None.\n \n• Location: Customer Site.\n \n• US Citizenship Required.\n \n \nGDIT IS YOUR PLACE:\n \n \n • 401K with company match\n \n• Comprehensive health and wellness packages\n \n• Internal mobility team dedicated to helping you own your career\n \n• Professional growth opportunities including paid education and certifications\n \n• Cutting-edge technology you can learn from\n \n• Rest and recharge with paid vacation and holidays \n \n \n#hireshipyardcareersgdit \n \n \nThe likely hourly rate for this position is between $29.52 - $37.95. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.\n \n Scheduled Weekly Hours:\n \n40\n \n Travel Required: \n \n10-25%\n \n T elecommuting Options: \n \nOnsite\n \n Work Location:\n \nUSA WA Seattle\n \n Additional Work Locations:\n \n Total Rewards at GDIT: \n \nOur benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.\n \n Our Identify Verification Process: \n \nAs part of the hiring process, we will ask you to complete an identity verification process that leverages advanced biometrics and artificial intelligence to ensure authenticity and protect against identity fraud. You are expected to be on camera during virtual interviews. We reserve the right to take your picture to verify your identity and prevent fraud. By proceeding, you authorize the collection, processing, and use of your biometric data for identity verification and security purposes.\n \n About our Work: \n \nWe are GDIT. A global technology and professional services company that delivers technology solutions and mission services to every major agency across the U.S. government, defense and intelligence community. Our 26,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50+ countries worldwide, offering leading mission-ready capabilities in AI, cloud, cyber and software development.\n \n \nJoin our Talent Community to stay up to date on our career opportunities and events at\n \n gdit.com/tc .\n \n \nEqual Opportunity Employer / Individuals with Disabilities / Protected Veterans

Summary: We are seeking a Quality Assurance Inspector at our manufacturing facility in Seattle, WA. This role will require you to accurately evaluate and document receiving, in-process and final inspection of highly intricate prototype, custom parts and assemblies for a variety of applications from Aerospace, military, Energy Production and R&D. You will need to have an extreme attention to detail, skill in basic shop mathematics, the ability to read and interpret blueprints and specifications and personal discipline to document and report nonconforming products in an objective manner. Responsibilities: • Enact inspection activities to obtain objective evidence of compliance for CNC manufactured parts, assemblies, complex tooling, and other components., • Interpret and measure features containing Geometric Dimensioning and Tolerancing (GD&T)., • Use manual inspection tooling such as micrometers, calipers, height gauges and surface plate activities to obtain compliance evidence for requirements up to the fourth decimal place (tenths) of accuracy., • Create and review compliance documentation related to Receiving, In-process and Final inspection on Materials, Processes and Completed Products., • Ensure conformance with customer Drawing, Specification and Purchase Order., • Assist engineering department in implementing strategies to improve accuracy. Qualifications: • Have recent 3-5 years (min) working experience within a machine shop atmosphere., • Have a reasonable understanding of math, including trigonometry and geometry., • Have a strong understanding of GD&T per ASME Y14.5., • Be skilled in the use of all measurement equipment and machinery within a manufacturing environment., • Strong skills in blueprint and part drawing interpretation for high tolerance, precision parts are mandatory., • Bring ideas to the table to increase speed and efficiency in the department. Skills: • Experience using DCC controls on a CMM., • Experience in PC-DMIS, utilizing both solid models and touch point programing to perform inspection activities., • Functional use of SolidWorks or a similar CAD system., • Familiarity with complex dimensional reporting mechanisms, such as AS9102., • Manipulation of outputs to multiple formats such as linear graphical representation, point cloud comparison, and polar graphics., • Familiarity with Digital Product Definition (DPD) requirements per D6-51991 desired. If you feel this is the time to join an expanding company where you can be effective and be noticed for the positive influence you bring, submit your resume online or email meleneyh@machinistsinc.com Diversity and equity are important values for us, and we encourage all qualified applicants to apply, regardless of race, gender, religion, sexual orientation, or disability. Position is subject to export control regulations as defined in 22 CFR 120.62

Are you looking to make a career change to an innovative company? This exciting opportunity as a Metal Fabrication Quality Inspector offers a competitive salary plus an excellent benefits package including medical insurance, dental insurance, vision insurance, paid PTO etc. Does this position match your future career goals? Then this Metal Fabrication Quality Inspector role could be the right fit for you. Responsibilities: • Performs 1st piece, in process, and final inspection for quality, appearance, and performance of complex parts and assemblies., • Performs detail and assembly level First Article Inspection Reports for first time build and repeat parts or part families., • Measures the layout and physical dimensions of machined parts, castings, jigs, fixtures and templates such as: length, height, inside diameter, outside diameter, concentricity, angle, arc, and radii, using combinations of aids and precision measuring instruments for a variety of standard or custom parts or materials that are produced in house or received from vendors., • Checks color, finish, dimensions, or other measurable or observable characteristics of materials or parts., • Verifies final inspection, to include sampling plans are complete prior to release of parts to shipping., • Uses a variety of precision measuring instruments and devices to include manual and FARO measuring equipment., • Validate measurement strategy, nominal, tolerances, and inspection results, • Review findings with Quality Manager., • Provide technical and application support for basic operators., • Responsible to participate in continuous improvement and associated training, • Responsible to adhere to the company Quality Policy, and to understand and follow all applicable Quality Work Instructions and Procedures, • Perform other duties as assigned Required Experience: • High School Diploma or GED equivalent required; Associates Degree preferred or relevant work experience preferred in a related field; plus some basic computer skills preferred but not required., • Minimum of 2 years’ experience in Quality Assurance or related field required; Good working knowledge of ISO / IEC / FDA / OSHA requirements preferred or willingness to learn within 3 months of employment., • Local candidates only. Benefits: • Dental insurance., • Health insurance., • Paid time off., • 401(k)., • 401(k) Matching., • Profit Sharing., • Vision insurance., • Direct Hire. Payrate: $24/hr.-$26/hr. Ask for: Sharron

Job Description D'Leon Consulting Engineers is seeking a Construction Inspector in Seattle, WA. We are seeking a detail-oriented and experienced Construction Inspector with expertise in rail transportation projects to join our team. The successful candidate will be responsible for monitoring and inspecting various stages of rail construction projects, ensuring compliance with plans, specifications, regulatory standards, and safety requirements. This role requires a strong understanding of rail systems, infrastructure, and construction processes, as well as a commitment to quality assurance and safety. Responsibilities • Conduct inspections of rail transportation construction projects, including civil, structural, mechanical, electrical, and signaling systems, to ensure compliance with approved plans, specifications, and regulatory requirements., • Monitor construction sites for adherence to safety protocols, identify violations, and collaborate with contractors to implement corrective actions., • Review project documents, including plans, specifications, submittals, and RFIs, to ensure accuracy and compliance with contract requirements., • Prepare detailed inspection reports, including photographs and documentation of construction progress, quality, and adherence to safety standards., • Coordinate with contractors, engineers, and project managers to address and resolve construction issues in a timely and efficient manner., • Verify materials, equipment, and workmanship on-site to ensure they meet project and regulatory standards., • Oversee testing and commissioning activities for rail systems, including trackwork, signals, and power systems, to ensure proper functionality and safety., • Assist in preparing and reviewing Non-Conformance Reports (NCRs), punch lists, and closeout documentation., • Participate in project meetings, including pre-construction and progress meetings, providing technical insights and inspection updates., • Ensure compliance with Federal Railroad Administration (FRA), Federal Transit Administration (FTA), and other applicable standards and regulations. Qualifications • Strong knowledge of rail systems, infrastructure construction, and associated codes and standards (e.g., AREMA, FRA, FTA, NFPA)., • Ability to interpret construction plans, specifications, and technical documents., • Proficient in construction management software such as Procore, Autodesk Construction Cloud, or similar tools., • Excellent communication and interpersonal skills for effective collaboration with project stakeholders., • Strong organizational skills and attention to detail to maintain accurate documentation and reports., • Familiarity with OSHA safety standards and commitment to promoting a safe work environment., • Valid driver’s license and ability to travel to various project sites as required.

Job Description SALARY $32.62 - $37.49 per hour New hires may earn a salary ranging from the minimum to the midpoint of the pay scale, with education and experience taken into consideration. BENEFITS We offer a comprehensive benefits package for Full-Time employees, including Medical, Dental, Vision, PTO, and 403(b) options. Additionally, employees have access to supplementary benefits such as the Employee Assistance Program, a subsidized ORCA pass, and more. This is a full-time position with benefits. LOCATION Seattle, WA (Hybrid) JOIN OUR MISSION TO END HOMELESSNESS Plymouth Housing is a nonprofit organization that develops and operates permanent supportive housing for single adults who have experienced chronic homelessness. With apartment buildings throughout King County, we believe everyone deserves a safe home and the opportunity to thrive. That’s why we provide long-term housing paired with on-site services that promote stability, health, and community. Our culture is rooted in dignity, respect, and shared responsibility: We practice hospitality, communicate with care, and collaborate across differences. We value lived experience, cultural responsiveness, and approaches grounded in harm reduction, trauma-informed practice, and resident choice. We look for people who are committed to safety, learning, and continuous improvement — and who bring steady, values-aligned service in moments that are complex or high-stress. ABOUT THIS ROLE The SPC/SSP Housing Quality Inspector plays a key role in supporting Plymouth Housing’s partnership with King County to administer two federally funded rental assistance programs: Shelter Plus Care (SPC) and the Scattered Sites Program (SSP). This position ensures that more than 200 participating program units across King County meet HUD housing quality standards as defined by NSPIRE, while also supporting strong landlord and service provider relationships. This role requires strong organization, attention to detail, sound judgment, and the ability to work effectively in a fast-paced environment. PRIMARY RESPONSIBILITIES • Conduct initial, annual, special, and re-inspections of units, grounds, structures, and building components to determine compliance with NSPIRE standards., • Coordinate inspection scheduling and correspondence with multiple stakeholders., • Identify, document, and communicate deficiencies, corrective actions, and timelines for completion., • Enter inspection findings accurately and promptly into inspection software and related systems., • Oversee assigned caseloads and track deficiencies through resolution in coordination with property management., • Conduct rent reasonableness reviews and negotiate contract rents with external landlords in alignment with Fair Market Rent and program requirements., • Determine utility reimbursement amounts as applicable., • Maintain positive collaborative relationships with landlords and service providers by providing education on program policies, HAP contract compliance, and partnership expectations., • Support special projects, performance measures, and evolving program needs., • Work cross-functionally with internal teams and external partners to improve workflows, reduce turnaround time, and streamline processes., • Collaboratively develop communication plans and tracking systems to ensure work is organized, accurate, and completed on schedule. KNOWLEDGE, SKILLS, AND ATTRIBUTES WE NEED FROM YOU • Builds trust and works respectfully with people from many backgrounds and lived experiences, contributing to safe, welcoming housing communities where residents experience dignity, choice, and belonging., • Uses self-awareness and humility to communicate effectively across differences, adapt approach, and treat people with fairness and respect., • Demonstrates strong organizational and time-management skills, with the ability to prioritize tasks, meet deadlines, and manage work in a fast-paced environment., • Demonstrates excellent interpersonal, written, and verbal communication skills, with strong customer service and negotiation abilities., • Maintains professionalism and composure in high-pressure situations and uses effective de-escalation and mediation skills., • Delivers accurate, detail-focused documentation and reporting, with the ability to identify issues, analyze solutions, and explain complex information clearly., • Collaborates effectively and builds positive working relationships with landlords, service providers, and internal teams., • Proficient in Microsoft Office applications, including Word, Excel, and Outlook, and comfortable working with databases and conducting online research., • Demonstrates integrity, confidentiality, and sound judgment in handling sensitive information and compliance-related work. QUALIFICATIONS • Experience working with homeless and low-income individuals, including those with mental illness, disabilities, chemical dependencies, or chronic health conditions, preferred., • Familiarity with HUD programs, Section 8, or other federal housing assistance preferred., • Experience reviewing contracts is desirable., • Knowledge of HQS and/or NSPIRE standards preferred., • Bachelor’s degree in human services, public administration, or a related field preferred., • Minimum of two (2) years of related experience in property management and/or providing social services directly to clients., • Equivalent combination of education and relevant professional experience will be considered., • NSPIRE training and certification within six months of hire., • Lead-Based Paint certification within six months of hire., • Valid Washington State driver’s license with a fully insurable driving record. Join us and be a catalyst for positive change! Plymouth Housing is an equal opportunity employer. We recruit, hire, train, and promote employees based on merit and business needs, and without regard to race, color, creed, religion, national origin, ancestry, citizenship or immigration status, sex (including pregnancy, gender identity, and sexual orientation), age, marital status, physical, sensory, or mental disability, honorably discharged veteran or military status, or any other status protected by applicable federal, state, or local law. Hybrid: Monday – Friday. Flexible to work 8am-4:30pm or 8:30am-5pm or 9am-5:30pm

Job Description Key Inspection Services is a home inspection company serving the greater Seattle area, including Bellevue, Everett, Snohomish, Redmond, Tacoma, Federal Way, Bellingham, Mt. Vernon, and Stanwood. The team is built around hands-on construction backgrounds and a genuine commitment to unbiased, detail-driven inspections that go beyond Washington State's minimum standards. Inspectors at Key Inspection Services use advanced tools including infrared thermal imaging, drone imaging, sewer scopes, and mold and air quality testing to give clients a complete, accurate picture of a property. Every inspection is backed by a clear, easy-to-read report delivered the same day, with photos and plain-language explanations that clients and their agents can actually use. The company has built its name on being thorough, prepared, and easy to work with, both for clients and for the real estate community that refers them. Key Inspection Services is hiring a Licensed Home Inspector to join a growing team in the Seattle market. This is a hands-on, field-based role that puts you inside homes conducting thorough inspections, walking clients and agents through what you find, and turning that visit into a clear, professional report the same day. You will represent Key Inspection Services directly with clients and agents, so the right fit depends as much on how you communicate as what you know about a house. RESPONSIBILITIES • Conduct thorough, unbiased home inspections in accordance with Washington State Standards of Practice and Key Inspection Services' internal standards, which exceed the state minimum, • Evaluate structural, mechanical, electrical, plumbing, and other major home systems and clearly document findings, • Use diagnostic tools such as moisture meters and infrared thermal imaging cameras as needed to identify issues, • Walk clients and their agents through findings in person after the inspection in a way that is clear and easy to understand, not overwhelming, • Produce a detailed, photo-supported report the same day using the company's inspection reporting software, • Maintain a professional, punctual, and courteous presence on every appointment, • Keep licensing, insurance, and any relevant certifications current and in good standing, • Coordinate with the office team on scheduling and any follow-up client questions after the report is delivered REQUIRED LICENSING & CERTIFICATIONS • Active Washington State Home Inspector License issued by the Washington State Department of Licensing (DOL), • License must be current and in good standing at the time of employment; an expired or canceled license does not meet this requirement, • Valid WA State driver's license, • Reliable transportation and the ability to travel to appointments throughout the greater Seattle service area PREFERRED QUALIFICATIONS • InterNACHI Certified Professional Inspector (CPI), • ASHI Certified Inspector, • Relevant construction, building, or trade certifications or experience (carpentry, electrical, plumbing, HVAC, general contracting, or similar), • Prior experience performing residential home inspections, • Strong verbal and written communication skills, with the ability to explain technical findings to non-technical clients COMPANY BENEFITS • Competitive starting pay, • A growing company that encourages leadership development and promotion, • Knowledgeable, encouraging, and present leadership, • Family-friendly culture with regular employee events and gatherings, • Inclusive and collaborative culture, • Ongoing training and personal learning opportunities WHY KEY INSPECTION SERVICES • Join a team of experienced, licensed inspectors known throughout the Seattle real estate community for thorough, well-documented reports, • Access to advanced diagnostic tools, including thermal imaging, drone imaging, sewer scopes, and mold and air quality testing, • An established brand with a strong reputation and a steady flow of client inspections, • A collaborative team environment, with office support handling scheduling and client coordination so inspectors can focus on the fieldwork

Type of Requisition: \n \nRegular\n \n Clearance Level Must Currently Possess:\n \nNone\n \n Clearance Level Must Be Able to Obtain:\n \nNone\n \n Public Trust/Other Required: \n \nNone\n \n Job Family:\n \nSCA\n \n Job Qualifications: \n \n Skills:\n \nElectronic, Shipbuilding, Shipyards\n Certifications:\n \nNone\n Experience:\n \n1 + years of related experience\n US Citizenship Required:\n \nYes\n \n Job Description:\n \n \nENGINEERING TECHNICIAN II\n \n \nThis is a waterfront shipboard construction and re-modernization position, working within shipyards and drydocks onboard U.S. Naval ships. The incumbent will be working in varying temperatures of high heat in the summer and cold in the winter preforming the following tasks:\n \n \n• Installs, maintains, repairs, overhauls, troubleshoots, modifies, constructs and tests various types of electrical, electronic, and mechanical equipment and related devices.\n \n• Applies technical knowledge of electronics principles to put equipment in operational condition and solve complex problems.\n \n• Troubleshoots and corrects malfunctions using specialized test and diagnostic equipment.\n \n• Modifies circuitry to improve performance.\n \n• Makes recommendations for improvements or modifications to correct problems.\n \n• Provides operation and maintenance instruction to customer personnel.\n \n• Prepares operating and malfunction reports and related documentation.\n \n• Assists engineering staff in determining and solving equipment design problems.\n \n• May perform quality assurance testing of assemblies and equipment fabricated by other technicians.\n \n• May provide work leadership to less-experienced technicians.\n \n• Participates in special projects, as required.\n \n \nCertificatons:\n \n \nCableway Certified, Connertor Certified Modular, COAX, Multi-Pin Connector Fabricator and Inspector: Connector Trained and Qualified with 40 hours OJT. \n \n \nWHAT YOU'LL NEED TO SUCCEED:\n \n• Education: Associates of Arts/Associates of Science.\n \n• Required Experience: 1+ years of related experience..\n \n• Location: On Customer Site.\n \n• US Citizenship Required.\n \n \nGDIT IS YOUR PLACE:\n \n• 401K with company match\n \n• Comprehensive health and wellness packages\n \n• Internal mobility team dedicated to helping you own your career\n \n• Professional growth opportunities including paid education and certifications\n \n• Cutting-edge technology you can learn from\n \n• Rest and recharge with paid vacation and holidays\n \n \n#hireshipyardcareersgdit \n \n \nThe likely hourly rate for this position is between $41.65 - $56.35. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.\n \n Scheduled Weekly Hours:\n \n40\n \n Travel Required: \n \n10-25%\n \n T elecommuting Options: \n \nOnsite\n \n Work Location:\n \nUSA WA Seattle\n \n Additional Work Locations:\n \n Total Rewards at GDIT: \n \nOur benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.\n \n Our Identify Verification Process: \n \nAs part of the hiring process, we will ask you to complete an identity verification process that leverages advanced biometrics and artificial intelligence to ensure authenticity and protect against identity fraud. You are expected to be on camera during virtual interviews. We reserve the right to take your picture to verify your identity and prevent fraud. By proceeding, you authorize the collection, processing, and use of your biometric data for identity verification and security purposes.\n \n About our Work: \n \nWe are GDIT. A global technology and professional services company that delivers technology solutions and mission services to every major agency across the U.S. government, defense and intelligence community. Our 26,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50+ countries worldwide, offering leading mission-ready capabilities in AI, cloud, cyber and software development.\n \n \nJoin our Talent Community to stay up to date on our career opportunities and events at\n \n gdit.com/tc .\n \n \nEqual Opportunity Employer / Individuals with Disabilities / Protected Veterans

Job Description ARMADA INC. POSITION DESCRIPTION TITLE: Quality Control Inspector REPORTS TO: Quality Control Supervisor FLSA STATUS: Non-Exempt PAY RANGE: $35.00-$45.00 per hour DOE FT / PT STATUS: Full Time LOCATION: Office, Shipyard(s) & Customer Facilities SUMMARY Conduct inspections and tests, documenting results and determining if quality of work meets standards and requirements IAW Quality Management System (QMS). ESSENTIAL DUTIES & RESPONSIBILITIES • Conduct inspections and tests, documenting results required by inspection/testing instructions, test memoranda, work instructions, standard practices, and drawing IAW with company QMS., • Conduct in-process inspections to ensure correct materials, proper application and installation procedures are utilized during production process IAW with company QMS., • Evaluate results from tests and inspections to determine acceptability with the authority to accept, reject or rework defective processes as per procedures IAW with company QMS., • Research contract/shipbuilding specifications, regulatory requirements, and technical manuals to assure that the work and inspections are conducted IAW the contract, specification, and standard items., • Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs, • Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals, • Perform other related duties as assigned SUPERVISORY RESPONSIBILITY • None KNOWLEDGE, SKILLS, ABILITIES & ATTRIBUTES • Skilled in blueprint reading, precision instrument utilization, technical manual interpretation, supervision, and written communication required, • Familiarity with Navy and Society for Protective Coatings standards, • Excellent verbal and written communication, • Excellent interpersonal skills, • Excellent record keeping and documentation skills, • Proficient with Microsoft Office Suite or related software. EDUCATION AND EXPERIENCE • High School diploma or equivalent, • 2+ years experience in the Maritime Industry, • Formal or informal on-the-job training in the Maritime industry, • Industry relevant Certifications preferred, such as SSPC-QCS, NBPI or NACE, • OSHA 10 (Company May Provide) WORKING CONDITIONS / PHYSICAL REQUIREMENTS • Exposure to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, heights, confined spaces, precarious places, proximity to other employees., • Prolonged periods of standing, kneeling, bending, twisting, squatting, • Ability to lift, carry, push, pull up to 50+ pounds (50 lbs occasionally, 25 lbs frequently, 10 lbs constantly), • Lifting includes from floor to waist, waist to shoulder, waist to overhead, • Ability to climb stairs and ladders, • Occasional periods sitting at a desk and working on a computer EQUIPMENT USED • Computer, telephone, fax machine, copy machine, adding machine, scanner, micrometer, dry film thickness gauce, infrared thermometer, psychomotor *This is a general list and is not all inclusive. REASONABLE ACCOMMODATIONS • Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions

Job Description Source Inspector – Machined Parts Position: On-Site Source Inspector Industry: Aerospace – Supplier Key Responsibilities: • Perform source inspection of precision machined components at supplier facilities before shipment., • Review engineering drawings, GD&T, specifications, and customer requirements., • Conduct First Article Inspection (FAI), in-process, and final inspections per AS9102 requirements., • Verify dimensions using precision measuring equipment (calipers, micrometers, height gauges, bore gauges, CMM reports, etc.)., • Ensure compliance with AS9100, quality requirements, and purchase order specifications., • Review material certificates, process certifications, CoC, and inspection records for traceability., • Identify and document non-conformances (NCRs) and verify corrective actions., • Approve or reject parts for shipment and prepare detailed source inspection reports., • Coordinate with supplier quality, manufacturing, and quality teams to resolve quality issues.\nCompany Description Zobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India. Zobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India.

Job Description A QC Inspector is responsible for performing basic visual and dimensional inspections during receiving, in-process, and final inspection stages. Most inspection requirements involve mechanical inspection, with occasional inspection of electrical and electronic assemblies. The candidate must be able to read engineering drawings and specifications. They candidate also be well-experienced in measuring parts with precision measuring tools according to engineering-specified dimensions. Must be able to read engineering drawings and specifications, and write Non-Conformance Reports (NCRs) Education and Experience: High School or Diploma. 5 years of experience in manufacturing quality control / QA. CMM experience is preferred but not required. The ability to read and understand electrical schematics is a plus, but perfection is not required \nCompany Description With almost four decades of experience as a proven industry leader, Acro continues to be consistently recognized among the Best & Brightest Companies to Work for in the United States. As an international professional services firm with deep expertise in consulting and staff augmentation offering a variety of solutions including MSP, VMS, RPO, HRO (and more), Acro operates across North America, Europe, and Asia from over 30 locations. Acro’s client portfolio includes some of the most well-known names in business and provides services across all verticals including technology, aerospace, energy, automotive, government, and manufacturing. To learn more, please visit www.acrocorp.com. With almost four decades of experience as a proven industry leader, Acro continues to be consistently recognized among the Best & Brightest Companies to Work for in the United States. As an international professional services firm with deep expertise in consulting and staff augmentation offering a variety of solutions including MSP, VMS, RPO, HRO (and more), Acro operates across North America, Europe, and Asia from over 30 locations. Acro’s client portfolio includes some of the most well-known names in business and provides services across all verticals including technology, aerospace, energy, automotive, government, and manufacturing. To learn more, please visit www.acrocorp.com.

Job Description Astronics Advanced Electronic Systems (AES) is hiring a Quality Inspector or Senior Quality Inspector on Second Shift. This is a full-time, on-site position in Redmond, WA. Second Shift hours are Monday – Friday, 3:00PM ~ 11:30PM and includes a 30-minute meal break. Job Summary The Quality Inspector will work from blueprints, engineering change notices, or established operating procedures to perform a wide range of inspection procedures and determine acceptance, rejection, or rework requirements at various stages of production. This role places a strong emphasis on precision inspection and verification work within the cables, circuit card assemblies (CCA) and mechanical cells. Duties & Responsibilities • Utilize complex measuring devices to perform inspections of purchased parts, materials, components, electronic hardware, and equipment as they are received from vendors or subcontractors, working primarily within the mechanical cell., • Interpret and apply the requirements of industry workmanship standards, ES procedures, and EPS procedures in the inspection process., • Identify conditions and write up non-conformances in a clear and concise manner., • Inspect critical in-process and/or finished production assemblies and subassemblies for conformance to drawings and quality assurance standards, with a focus on cables and mechanical components., • Review, validate, and correct First Article Inspection (FAI) paperwork from suppliers., • Exhibit productive work habits, effective time management, goal setting, prioritizing tasks, and follow-up on commitments across a variety of work challenges., • Contribute to continuous improvement efforts to enhance the efficiency and effectiveness of the receiving inspection group. Minimum Qualifications Education/Experience • High school diploma or general education degree (GED) required., • Quality Inspector typically requires 1–2 years of direct experience performing similar duties and responsibilities., • Sr. Quality Inspector typically requires 3-5 years of direct experience performing similar duties and responsibilities., • Experience with circuit card assembly (CCA) inspection is required. Technical Skills • Quality control analysis skills, including the ability to conduct tests and inspections of products, services, or processes to evaluate quality and performance., • Proficiency with Microsoft Office products, including the ability to use Microsoft Excel., • Ability to learn and navigate a variety of business systems., • Strong attention to detail. Employment Eligibility Requirements • This position may involve access to items subject to U.S. export-control laws. Employment is contingent upon the employee’s authorization to access such items under applicable law. The company does not guarantee and is under no obligation to seek such authorization if it would be necessary., • An offer of employment is contingent on successfully passing a pre-employment background screen and drug test including cannabis screening. Compensation • Quality Inspector: $21.93–$29.67 per hour (midpoint: $25.80) plus an additional $2.00 per hour as a 2nd shift differential; typically consistent with 1–2 years of experience., • Senior Quality Inspector: $24.52–$36.79 per hour (midpoint: $30.65) plus an additional $2.00 per hour as a 2nd shift differential; typically consistent with 3–5 years of experience., • Quarterly Profit Sharing Bonus eligible., • Factors such as experience in comparable roles, skill set, training, education, certifications, other qualifications, market conditions, and business needs influence the actual salary offered. It is not typical to be hired at or near the top of the range. Comprehensive Benefits Package • Health & Well-Being: Medical, dental, vision, disability, and life insurance, plus optional critical illness, accident prevention, and hospital indemnity coverage., • Financial Security: 401(k) plan and Employee Stock Purchase Plan., • Work–Life Balance: Flexible hybrid work arrangements for eligible positions, Employee Assistance Program, and a supportive culture encouraging balance., • Generous PTO: Starting at 120 hours annually, plus 12 paid holidays per year.

Job Description Follow this link for a realistic job preview and videos of what it's like to work at KTA!: https://kta.com/working-at-kta/ Elzly Technology Corporation (Elzly) is recruiting highly experienced senior level coating inspectors with shipbuilding experience in the western U.S. (especially in San Diego, CA). Travel will be required throughout the United States for several weeks to months at a time. Elzly is a growing consulting-engineering firm that provides subject matter expertise and technical services for corrosion prevention and control. Our services include assisting our clients with field investigations of corrosion phenomena, research and testing of materials, developing training materials, and development of specifications. Culturally, we focus on providing our customers a valuable service while creating an enjoyable and professional organization, allowing employees maximum opportunity to express their individual talents. Required Education and/or Experience: High School Diploma or GED equivalent; and one of the following: related military experience, completion of trade/industrial school, or trade experience. Required Certification: Association for Materials Protection and Performance (AMPP) Senior Certified Coatings Inspector (formerly NACE CIP Level III with peer review) or Association for Materials Protection and Performance (AMPP) Basic or Certified Coatings Inspector (formerly NACE CIP Level I or II) with a willingness/ability to obtain Senior Certified Coatings Inspector level. Desired Experience (approximately 2-8 years): • Military Sealift Command (MSC) experience / experience in the corrosion control field., • Experience overseeing and providing quality control for corrosion control work; interfacing with government, shipyard, and contractor corrosion control maintenance activities; and working with US Navy ship leadership, ship personnel, and program leadership., • Experience in corrosion prevention and control trade. Physical Requirements: Close vision, distance vision, color vision, depth vision, ability to adjust focus, work from a ladder or lift occasionally, safely lift 20 pounds, walk on uneven ground or terrain, work in confined spaces, crawl for extended periods of time, enter 24” diameter space, hearing, work outside (including inclement weather), manual dexterity (to handle small objects, instruments, or gages), wear a respirator, speaking and smelling. Salary Range: $30.00-$60.00/hour. Hourly rate is based on experience and certifications. Candidates must be legally authorized to work in the U.S. and hold a valid driver's license. Elzly offers competitive pay, great benefits, and is a casual, friendly workplace, where all employees are treated with dignity and respect. We are a 100% employee-owned company, run with family-inspired values and ethics, where diverse perspectives, experiences, and capabilities are embraced and valued. The employees of Elzly are dedicated to making each other, the company and our clients successful. We believe that serving our clients as we want to be served results in long lasting business relationships. We are committed to helping you take your career to a new and exciting level. At Elzly, you’ll work, learn from, and become one of the best in the industry. KTA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment based on merit, without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. KTA is a Standing Firm Company. Elzly Technology Corporation (Elzly) is a wholly-owned subsidiary of KTA-Tator, Inc. (KTA). Links: KTA's Equal Employment Opportunity Policy Statement Know Your Rights: Workplace Discrimination is Illegal The Family and Medical Leave Act Pay Transparency Nondiscrimination Provision Notice of E-Verify Participation E-Verify Right to Work We strive to make this site accessible to any and all users. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center and application process as a result of your disability or if you have Equal Employment Opportunity questions. To request an accommodation, please contact us at info@kta.com Powered by JazzHR 8QQbTtEnAk

Job Description About Atlas Atlas is a trusted leader in environmental and infrastructure consulting services; we provide services that enable communities to flourish and thrive. With a team of 3,500 employees and offices throughout the US, we combine local expertise and a network of relationships to deliver solutions to both public and private clients. Our services help improve the quality of life in the communities where we live and work. We always aim for smart, safe, and sustainable results. At Atlas we understand that our future is everyone’s responsibility, and we create a better experience at every stage of a project. Job Description At Atlas, we're providing services that enable communities to flourish and thrive, and if you’re CM Inspector 2 ready to provide QA inspection support for heavy civil infrastructure projects, and committed to doing meaningful work, then this is your moment. 4 years of previous road, bridge, transportation related experience required. Join a dynamic, value-driven, client- and community-focused environment where your work creates a lasting positive impact for the people and communities we serve. Core Responsibilities Compose Daily Inspection Reports. Track materials for contract compliance. Observe testing of field related materials. Review Quality Control Plans. Monitor Field Testing throughout the project. You’ll thrive here if you 4 years of construction quality experience and/or degree in Civil Engineering, Construction Management, or similar. OR 5 years of construction quality experience on civil, residential, commericial, or transit projects Required specialty certifications; WAQTC and ACI certifications; one or more WABO/ICC Special Inspector Certifications. Navigate uneven surfaces, lift up to 30 pounds, and climb stairs and ladders. Excellent verbal and written communication skills. Proficient with mobile computing tools including Outlook, Bluebeam, Excel, and Word. Valid driver's license with an acceptable driving record. Ability to interpret contract plans and specifications and perform and check engineering calculations. Ability to travel for Western Washington per diem projects and flexibility to adjust work schedule to coincide with contractor activities including the ability to travel as needed, work nights, weekends, holidays, and perform emergency callout/standby. What you can expect from us The A-Team Experience is our employee program focused on helping our people thrive professionally, personally and as part of a community. We trust our people to do great work and live fulfilling lives, and we provide resources that care for our people, both at work and in life: Health & Wellness: We offer medical, dental and vision coverage with multiple plan options, including no-cost employee-only medical coverage. Time Off & Family Support: We offer vacation time, paid holidays, sick & safety leave (SSL) and paid parental leave Retirement: We help employees plan for the future with a 401(k) and company match. Insurance: To provide protection and peace of mind, we offer Life, AD&D (Accidental Death & Dismemberment) and Disability insurance. Safety Program: We are committed to safety as part of our ‘quality of life’ core value, and we provide approved PPE at no cost and reimbursement for prescription safety glasses and protective footwear. Learning & Development: We provide clear career paths, learning resources and development programs allowing you to see how you can grow and advance within the company. We offer internal certifications on specific skills and support external credentials through tuition reimbursement. Belonging: We support Employee Communities (ECs), voluntary, employee-led groups that create connections, belonging and shared purposes. Flexibility: May vary by project demands and regional workloads, but we are committed to providing reasonable accommodation to help employees manage their personal and professional responsibilities. Our people and our culture are central to our work. Our values bring us together, create a sense of belonging and give us purpose. They guide how we make decisions, how we work as a team and how we serve our clients. Life: We enhance the quality of life. We value people and safety above all else. Heart: As our hallmark, we act with compassion, empathy, and respect. Trust: We work together as partners, doing what we say with full accountability. Mastery: Always striving for the highest quality, greatness inspires our work. About the Job • Career Level: Associate, • Employment Type: Full-time, • Compensation: $32 - $50 hourly rate The expected salary range for the position is displayed in accordance with the state’s law. Final agreed upon compensation is based upon individual qualifications and experience. EEO Statement Atlas is committed to providing equal employment opportunities for all employees and applicants without regard to race (including hairstyles, hair texture, hair type, or hair length commonly or historically associated with race), ethnicity, creed, religion or religious creed, color, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions or requests for pregnancy disability leave and/or family care leave), gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship or immigration status, primary language, crime victim status, criminal conviction history, uniformed service member or veteran status, marital status, age, genetic information, disability or protected medical condition, genetics, political affiliation or activities, or any other status protected under applicable federal, state, or local laws. Notice to Third Party Agencies Please note that Atlas Technical Consultants does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Atlas will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Atlas explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Atlas. Ready to build a career to be proud of? Join the A-Team today! #LI-KK1

Job Description What is special about Lighthouse? Lighthouse is built on a foundation of unique, compassionate, highly driven individuals. We elevate the strengths and talents of those around us while leveraging opportunities for growth. We offer the experience of solving complex problems while continuing to grow multiple facets of your career. Lighthouse is where innovation meets support and where collaboration is the key ingredient to success. We grow together and are stronger together. What’s unique about this role? Digital Forensics Consultants are responsible for providing forensic analysis services and conducting onsite and remote collections of electronically stored information (ESI) from computers, mobile devices, networks, collaboration apps, cloud repositories, and various other media and data sources. Using state-of-the-art technology, they process and analyze data in support of forensic investigations and litigation and prepare compelling, detailed reports of their findings. Forensic Consultants may occasionally provide court testimony related to forensic analysis and data collection projects. What will this person do? • Perform forensicallysoundonsite and remote collections of ESI from a wide variety of data sources, including but not limited to computers, mobile devices, hard drives, servers, external data storage devices, cloud data sources, and other digital media., • Perform forensic analysis of data in support of investigations and/or litigation., • Prepare detailed written forensic analysis reports, declarations, and related correspondence., • Provide written and/or oral testimony in court proceedings as necessary., • Assistclients and various Lighthouse business units in scoping new forensic projects to identify project requirements, recommend workflows, and develop timing and cost estimates., • Provideongoing andtimelyproject status updates., • Accurately track and log assigned data collections., • Conduct custodian interviews to identify relevant data sources., • Enter time and expenses into the appropriate billing system by prescribed deadlines., • Perform other related duties as assigned Bring your passion and together we will shine. It would also be great if you had the following: • Bachelor’s Degree or equivalenttraining andexperience., • A person performing successfullyin this role typically hasfouror more years of experience in Digital Forensics consulting and client service., • Ability to describe complex technical concepts / ideas in non-technical terms, to less technical audiences, • Strong written and oral communication skills., • Exceptional attention to detail and strong organizational skills., • Ability to balance many priorities and to work under pressure while remaining calm., • Ability to be a team player and to collaborate with the various teams across the Company., • At least one security or digital forensics industrycertifications, such as CISSP,EnCE, CCE, CFCE, MCFE, or similar, • Experience in the forensiccollection andanalysis of Windows, MacOS, iOS, and Android devices., • Experience in the forensic collection and analysis of cloud and enterprise data repositories (Microsoft Purview, Google Workspace, etc.), • Training, experience, and/orcertifications with forensic tools such as Axiom, EnCase, Forensic Toolkit, Cellebrite (Inseyetes, UFED, Physical Analyzer, Digital Inspector, Digital Collector),Verakey/Graykey, or open-source forensic tools., • Masteryofdata collection, preservation, and chain of custody principles and procedures., • Experience ininterfacing withclients and client partners to plan data collection and forensic analysis projects involving a wide variety of physical devices, network storage, cloud storage, and email platforms., • Understanding ofproject economics with the ability to work closely with forensic team leaders to provide project time and expense estimates and set appropriate project expectations., • Experience providingwritten reports and/or declarationsfor use inlegal proceedings., • Experience providing court testimony is a plus., • Programming, scripting, and/or database design experience is a plus., • Linux/UNIX experience is a plus. Work Environment and Physical Demands • Duties are performed in a typical office environment while sitting at a desk or computer table., • Duties require the ability to use a computer, communicate over the telephone, and read printed material., • Duties may require being on-call periodically and working outside normal working hours (evenings and weekends)., • Duties will require occasional travel via automobile, airline, or other common passenger transport., • Travel requirements are dependent upon project needs. Travel is typically 10-30%., • Duties may occasionally be performed at a client’s facility., • Duties may require the ability tolift upto 50 lbs. Lighthouse celebrates and thrives on diversity and is an Equal Opportunity Employer. We hire, train, and promote regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. We welcome any talents and contributions you can bring to the team and are deeply committed to growing an environment where everyone can feel safe, is respected, and can show up as themselves. Come as you are! As required by applicable pay transparency laws, Lighthouse complies with compensation disclosure requirements for roles that may be hired in locations under these requirements. Factors that may be used to determine your actual salary may include a wide array of factors, including: your specific skills and experience, geographic location, or other relevant factors. The salary range for this position may be tailored to be lower or higher in different talent markets. Lighthouse offers a comprehensive quality benefits package including, medical, dental, vision, and a 401k with company match. Company paid benefits also include Life & AD&D, short and long-term disability, telemedicine, and other wellness plans. We offer a generous Flexible PTO program and paid volunteer days. Employees may also participate in voluntary insurance plans including accident, hospitalization, and critical illness plans as well as pet insurance. This role will be eligible to participate in an annual bonus or incentive program. As a trailblazer and catalyst for change, Lighthouse rises to each opportunity to help our clients, and our people do what they do best—shine.

Job Description Astronics Advanced Electronic Systems (AES) is seeking a Quality Inspector for our Receiving Inspection Group. This is a full-time, on-site position in Kirkland, WA on 1st shift (Monday–Friday, 8 hours/day with a 30-minute meal break). Job Summary The Quality Inspector, Receiving Inspection is responsible for performing incoming inspections of purchased parts, materials, components, electronic hardware, and equipment to ensure they meet Astronics AES quality, engineering, and customer requirements. Working from blueprints, specifications, engineering change notices, and established procedures, this role conducts a wide range of mechanical and electronic inspections using precision measuring tools and industry workmanship standards. The Quality Inspector determines product acceptance, rejection, or rework requirements, accurately documents nonconformances and First Article Inspection (FAI) results, and contributes to continuous improvement within the Receiving Inspection Group. This position supports the integrity of the supply chain by ensuring only conforming product is released to production. Duties & Responsibilities • Perform inspection of purchased parts, materials, components, electronic hardware, and equipment as they are received from vendors or subcontractors, using drawings, procedures, specifications, and complex measuring devices., • Interpret and apply the requirements of industry workmanship standards, ES procedures, and EPS procedures throughout the inspection process., • Identify nonconforming conditions and clearly document Non-Conformances in a concise, accurate manner., • Review, validate, and correct First Article Inspection (FAI) paperwork from suppliers., • Demonstrate strong attention to detail in all inspection and documentation tasks., • Maintain productive work habits, including effective time management, setting objectives and priorities, and following up on commitments across a variety of work challenges., • Quickly learn and adapt to AES business systems and tools to perform inspection tasks., • Learn AES standards and obtain required certifications to perform inspections effectively and independently., • Utilize and understand precision measurement tools (e.g., Vision Measuring Machine (VMM), Coordinate Measuring Machine (CMM)) to perform precise inspections and verification tasks within the mechanical cell., • Understand AES FAI requirements to effectively review supplier FAI reports., • Participate in continuous improvement efforts to enhance processes within the receiving inspection group. Minimum Qualifications Education & Experience • High school diploma or general education degree (GED) required., • Quality Inspector typically requires 1–2 years of direct experience performing similar duties and responsibilities., • Sr. Quality Inspector typically requires 3-5 years of direct experience performing similar duties and responsibilities., • Experience with circuit card assembly (CCA) inspection is required. Technical Skills • Quality control analysis skills, including the ability to conduct tests and inspections of products, services, or processes to evaluate quality and performance., • Proficiency with Microsoft Office products, including the ability to use Microsoft Excel., • Ability to learn and navigate a variety of business systems., • Strong attention to detail. Employment Eligibility Requirements • This role may involve access to items subject to U.S. export-controls laws or other applicable U.S.-government legal or contractual requirements. To assess whether any licenses, authorizations, or other exceptions are required, please indicate below whether you are a U.S. Person. If you are not a U.S. Person, the company does not guarantee and is under no obligation to seek such authorization if it would be necessary. This information is collected solely for this compliance purpose., • Offers of employment are contingent upon successfully passing a pre-employment background check and drug test including cannabis screening. Compensation • Quality Inspector: $21.93–$29.67 per hour (midpoint: $25.80); typically consistent with 1–2 years of experience., • Senior Quality Inspector: $24.52–$36.79 per hour (midpoint: $30.65); typically consistent with 3–5 years of experience., • Quarterly Profit Sharing Bonus eligible., • Factors such as experience in comparable roles, skill set, training, education, certifications, other qualifications, market conditions, and business needs influence the actual salary offered. It is not typical to be hired at or near the top of the range. Comprehensive Benefits Package • Health & Well-Being: Medical, dental, vision, disability, and life insurance, plus optional critical illness, accident prevention, and hospital indemnity coverage., • Financial Security: 401(k) plan and Employee Stock Purchase Plan., • Work–Life Balance: Flexible hybrid work arrangements for eligible positions, Employee Assistance Program, and a supportive culture encouraging balance., • Generous PTO: Starting at 120 hours annually, plus 12 paid holidays per year.

Job Description Who We’re Looking For We are seeking an accomplished, motivated, and versatile Subject Matter Expert (SME) in NDT-E to join our team. This is a pivotal, high-impact position supporting a multidisciplinary group of engineers, analysts, and technicians who perform nondestructive testing and evaluation (NDT-E) on critical infrastructure—bridges, dams, pavements, and other civil structures. The ideal candidate is a highly experienced engineer with deep expertise in NDT-E methods, especially related to structural systems, corrosion-resistant coatings, and thermal barrier technologies. You will play a key role in defining technical strategy, ensuring quality and performance, mentoring field staff, and supporting business development and growth initiatives. What You’ll Do • Lead the development of technical strategies, QA/QC protocols, and field methodologies for NDT-E projects., • Oversee project data reviews and collaborate with analysis teams to guide decision-making, timelines, and deliverables., • Provide hands-on mentorship and leadership to junior engineers and field crews, ensuring adherence to state-of-the-art equipment, techniques, and in-house certifications., • Conduct technical research on emerging technologies, tools, and methods in NDT-E for civil infrastructure., • Represent BDI at conferences, trade shows, and client meetings—supporting business development efforts and elevating BDI’s brand as a leader in NDT-E services., • Collaborate across departments to align project schedules, technical analysis, and financial goals with client and company expectations., • Support strategic initiatives including sales plan execution and the development of future service offerings. What You Bring • Advanced expertise in acoustic, ultrasonic, electromagnetic, and electrochemical NDT-E techniques, including data processing, analysis, and reporting., • Deep understanding of bridge, dam, and heavy civil infrastructure systems and the interpretation of structural analysis data., • Extensive field experience in NDT-E with a strong track record of producing high-quality technical reports., • Strong communication skills—able to convey complex information clearly to technical and non-technical audiences., • Familiarity with structural instrumentation, monitoring systems, and various NDT tools and methods such as ground-penetrating radar and ultrasonic shear wave tomography (MIRA)., • A results-oriented, adaptable leader with proven project management and team guidance skills. You Are • Recognized in the industry as a trusted expert and thought leader in NDT-E., • Motivated by solving complex technical problems and mentoring the next generation of engineers., • Organized, detail-oriented, and process-driven, with the ability to manage multiple priorities., • Collaborative, flexible, and ready to grow with a fast-moving, innovative organization., • Comfortable with public speaking and publishing in technical forums. Qualifications • 10+ years of experience in NDT-E and/or structural instrumentation., • Master’s degree in Civil, Mechanical, Metallurgical, or Materials Engineering., • Technical expertise in concrete and steel NDT-E applications using ultrasonics, GPR, thermography, and electrochemical techniques., • Experience with material sampling and testing (e.g., concrete coring, chloride testing, petrography)., • Willing to travel 25–50% for project support, client meetings, and industry events., • Strong written, verbal, and visual communication skills., • PE license preferred., • Experience with managing engineering service projects or civil construction efforts is desirable. Preferred Certifications • ASNT Level II in UT, PAUT, MT, and/or PT, • Certified Welding Inspector (CWI) with AWS D1.5 experience, • FHWA-NHI Certifications (130055, 130078) Compensation and Benefits Salary Range: $150,000 - $200,000 per year We offer a comprehensive, industry-leading compensation and benefits package designed to support your personal and professional well-being: • Paid time off and paid holidays, • 401(k) with company match: 100% match on contributions up to 3%, plus 50% match on contributions up to 5%, • Competitive medical insurance coverage with generous employer contributions, • Health Savings Account (HSA) with employer funding, • Company-paid life, AD&D, and disability insurance, • Optional dental, vision, hospital, critical illness, accident, and pet insurance, • Employee Assistance Program (EAP) BDI provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionStart Your Career with Orca Bay Foods About Orca Bay Foods Orca Bay Foods has been a trusted food processor in the Pacific Northwest for nearly 30 years. We take pride in producing high-quality food products while maintaining the highest standards of safety and cleanliness. If you're dependable, detail-oriented, and looking to start a career in the food industry, we invite you to join our team. We are currently hiring entry-level Quality Control Inspectors to support our production team. No previous quality assurance experience is required—we'll provide the training you need to succeed. This is a great opportunity to build a career in food manufacturing and gain valuable industry experience. What You'll Do Check products throughout production to ensure they meet quality and safety standards Monitor things like temperature, product weight, packaging, and labeling Report anything that doesn't look right and help fix small issues quickly Fill out simple paperwork and inspection checklists accurately Work closely with supervisors and team members to keep things running smoothly Keep your work area clean and follow all safety and sanitation rules Work Environment & Conditions Fast-paced, cold, and wet production environment (temperatures may reach as low as 40°ree;F) You'll be on your feet most of your shift and may need to lift items up to 50 lbs Regular exposure to production equipment, noise, and moisture Schedule & Availability Available Shifts: Shift 1: 4:00 AM - 4:00 PM Shift 2: 3:00 PM - 3:00 AM Extended hours and weekend work may be required during peak production periods Consistent attendance and punctuality are essential Why Work With Us? Full-time, year-round employment Paid on-the-job training—no experience necessary Stable hours (40+ per week) Benefits available after 60 days Opportunities for promotion and long-term career growth If you're ready to work hard, learn fast, and grow with a company that values quality and teamwork—apply today to join Orca Bay Foods! • High school diploma or equivalent, • Ability to read, write, and communicate in English (Basic Level), • Strong attention to detail and ability to follow instructions and procedures accurately, • Basic understanding of quality control principles and practices, • Ability to use equipment and instruments effectively, • Good problem-solving skills and ability to work independently or as part of a team, • Good communication skills, both verbal and written, • Basic knowledge of MS Office applications (Word, Excel, Outlook)

Job Description Pay: $20.00–$25.00 per hour (DOE) Mileage/Gas: Reimbursed Phone Allowance: $25/month Monthly Performance Bonus: $100 for completing 95%+ of assigned inspections on time Job Summary We are looking for a highly dependable, detail-oriented Customer Cleaning Inspector to help ensure our commercial cleaning services consistently meet our company’s quality standards. This is a quality-control position — not a cleaning position. Your primary responsibility is to visit assigned commercial client locations after cleaning services have been completed, carefully inspect the quality of the work, document your findings, and submit accurate inspection reports. We are looking for someone who naturally notices the details other people miss. You should be able to recognize both excellent cleaning and areas that have been overlooked while remaining fair, consistent, and objective when evaluating cleaning teams. Your job is simple: Inspect. Document. Report. You will not be responsible for cleaning, supervising cleaners, scheduling employees, selling services, or resolving customer complaints. What You’ll Do • Travel to assigned commercial client locations to perform quality inspections., • Inspect completed cleaning services according to the client’s scope of work and company quality standards., • Follow established inspection checklists without skipping required areas., • Identify commonly missed cleaning areas and legitimate quality deficiencies., • Take clear photographs when documentation is needed., • Write specific notes describing deficiencies or observations., • Complete and submit inspection reports promptly., • Rate cleaning performance according to established company standards., • Recognize excellent cleaning performance as well as deficiencies., • Identify recurring quality problems or patterns., • Communicate inspection findings clearly to the appropriate company representative., • Maintain accurate inspection records., • Interact professionally and respectfully with customers when necessary., • Protect customer privacy, property, and confidential information., • Complete assigned inspections on time and communicate promptly if an issue prevents completion. What This Position Does NOT Do You will not be responsible for: • Performing routine cleaning, • Re-cleaning areas that fail inspection, • Supervising or managing cleaning employees, • Scheduling cleaning crews, • Hiring or firing employees, • Collecting customer payments, • Selling or upselling services, • Making promises to customers regarding corrective action, • Resolving customer complaints beyond documenting and reporting them Your responsibility is to inspect, document, and report. What Success Looks Like A successful Customer Cleaning Inspector: • Completes at least 95% of assigned inspections on time, • Performs thorough rather than rushed inspections, • Consistently follows the inspection checklist, • Identifies legitimate cleaning deficiencies, • Does not unfairly penalize cleaning teams, • Provides useful photographs and specific documentation, • Submits reports promptly, • Applies the same standards across different customers and cleaning teams, • Communicates professionally with customers and company personnel, • Can be trusted to work independently Who Will Excel in This Position? You may be an excellent fit if you are the type of person who walks into a room and immediately notices that something is out of place. You enjoy working independently, take pride in doing things correctly, keep your commitments, and don’t need someone constantly reminding you what needs to be done. You are also fair. Your goal isn’t to “catch” cleaning teams making mistakes. Your goal is to provide an accurate and objective assessment of the quality being delivered to our customers. If you are dependable, observant, organized, professional, and naturally pay attention to details others overlook, we would like to hear from you. Requirements What We’re Looking For The ideal candidate is someone who is: • Extremely detail-oriented, • Highly dependable and punctual, • Honest and objective, • Organized, • Self-motivated, • Comfortable working independently, • Consistent when applying standards, • Professional around customers, • Comfortable using a smartphone and technology, • Able to communicate clearly in writing, • Able to manage multiple inspection locations and deadlines, • Comfortable identifying deficiencies without being overly critical, • Able to follow established procedures instead of relying on personal opinions We especially want someone who naturally notices things such as fingerprints on glass, dust on ledges, debris under furniture, missed corners, restroom residue, improperly vacuumed edges, missing trash liners, floor streaks, dirty baseboards, and other details that can affect a customer’s perception of quality. Requirements • Valid driver’s license, • Reliable personal transportation, • Ability to travel between assigned customer locations, • Smartphone capable of taking clear photographs and completing digital reports, • Strong attention to detail, • Dependable attendance and punctuality, • Ability to work independently with limited supervision, • Ability to follow written inspection procedures and checklists, • Good written and verbal communication skills, • Ability to organize assignments and meet deadlines, • Professional appearance and demeanor, • Ability to maintain customer confidentiality Preferred Experience Experience in any of the following is helpful but not necessarily required: • Commercial cleaning/janitorial services, • Quality assurance or quality control, • Property inspections, • Hotel housekeeping inspection, • Property management, • Facility management, • Building services, • Field inspection, • Operations auditing Commercial cleaning experience is preferred, but we are willing to train the right person. We value reliability, integrity, attention to detail, and good judgment more than years of cleaning experience. Benefits • Full Time, • Hourly Rate: $20-$25 per hour, depending on experience and qualifications, • Mileage/Gas Reimbursement: Provided according to company policy, • Phone Allowance: $25 per month, • Performance Bonus: Earn an additional $100 per month when 95% or more of assigned inspections are completed on time., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Training & Development

Job Description Mechanical Systems Inspector – Bull Run Filtration Facility Gresham, Oregon | Relocation Assistance Available Build the Future of Water Infrastructure Atlas is seeking an experienced Mechanical Systems Inspector to support construction of the Bull Run Filtration Facility, one of the Pacific Northwest’s most significant water infrastructure projects. This state-of-the-art facility will provide a resilient drinking water filtration system serving the greater Portland region for generations to come. In this role, you will perform inspections of mechanical systems including process piping, pumps, valves, tanks, and treatment equipment to verify compliance with project specifications, codes, and regulatory requirements. This position requires a strong field presence, exceptional attention to detail, and the ability to collaborate effectively with contractors, engineers, technicians, and project leadership. Key Responsibilities • Inspect process piping, pumps, valves, treatment equipment, foundations, supports, and restraints., • Verify installations comply with approved drawings, specifications, and manufacturer requirements., • Witness and document hydrostatic testing, pressure testing, equipment startup, and commissioning activities., • Review shop drawings and submittals to support inspection activities., • Document non-conforming work and coordinate corrective actions., • Maintain daily reports, field documentation, and photo records., • Participate in pre-installation meetings, hold points, and quality reviews., • Monitor contractor quality control activities and support project commissioning efforts. Qualifications • 5+ years of mechanical inspection or construction experience., • Experience on water, wastewater, heavy civil, or industrial infrastructure projects., • Ability to read and interpret construction drawings, specifications, P&IDs, and isometrics., • Knowledge of mechanical equipment installation, piping systems, testing, and commissioning., • Familiarity with AWWA, ASTM, and ASME standards preferred., • Experience with welding inspection or CWI certification is a plus., • Proficiency with Procore, Bluebeam, and Microsoft Office., • OSHA 10 or OSHA 30 preferred., • Strong communication, documentation, and organizational skills., • Valid driver's license required., • Ability to pass background check, MVR review, and drug screening. Why Atlas? • At Atlas, we are committed to delivering quality, safety, and innovation across the nation’s most complex infrastructure projects. The Bull Run Filtration Facility represents a once-in-a-generation investment in Oregon’s water future, and this role offers the opportunity to make a lasting impact on a project that will serve millions for decades to come., • Join a team dedicated to building confidence in every stage of project delivery while advancing your career on one of the Pacific Northwest’s premier infrastructure projects. What you can expect from us The A-Team Experience is our employee program focused on helping our people thrive professionally, personally and as part of a community. We trust our people to do great work and live fulfilling lives, and we provide resources that care for our people, both at work and in life: Health & Wellness: We offer medical, dental and vision coverage with multiple plan options, including no-cost employee-only medical coverage. Time Off & Family Support: We offer vacation time, paid holidays, sick & safety leave (SSL) and paid parental leave Retirement: We help employees plan for the future with a 401(k) and company match. Insurance: To provide protection and peace of mind, we offer Life, AD&D (Accidental Death & Dismemberment) and Disability insurance. Safety Program: We are committed to safety as part of our ‘quality of life’ core value, and we provide approved PPE at no cost and reimbursement for prescription safety glasses and protective footwear. Learning & Development: We provide clear career paths, learning resources and development programs allowing you to see how you can grow and advance within the company. We offer internal certifications on specific skills and support external credentials through tuition reimbursement. Belonging: We support Employee Communities (ECs), voluntary, employee-led groups that create connections, belonging and shared purposes. Flexibility: May vary by project demands and regional workloads, but we are committed to providing reasonable accommodation to help employees manage their personal and professional responsibilities. Our people and our culture are central to our work. Our values bring us together, create a sense of belonging and give us purpose. They guide how we make decisions, how we work as a team and how we serve our clients. Life: We enhance the quality of life. We value people and safety above all else. Heart: As our hallmark, we act with compassion, empathy, and respect. Trust: We work together as partners, doing what we say with full accountability. Mastery: Always striving for the highest quality, greatness inspires our work. About the Job • Career Level: Associate, • Employment Type: Full-time EEO Statement Atlas is committed to providing equal employment opportunities for all employees and applicants without regard to race (including hairstyles, hair texture, hair type, or hair length commonly or historically associated with race), ethnicity, creed, religion or religious creed, color, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions or requests for pregnancy disability leave and/or family care leave), gender identity, gender expression, sexual orientation, national origin, ancestry, citizenship or immigration status, primary language, crime victim status, criminal conviction history, uniformed service member or veteran status, marital status, age, genetic information, disability or protected medical condition, genetics, political affiliation or activities, or any other status protected under applicable federal, state, or local laws. Notice to Third Party Agencies Please note that Atlas Technical Consultants does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Atlas will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Atlas explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of Atlas. Apply today and help deliver one of the region’s most important water treatment facilities. #LI-KK1

The Jewelry Quality Assurance Inspector carefully inspects finished jewelry pieces to ensure they meet defined quality standards and customer specifications. This role focuses on identifying cosmetic and workmanship defects, verifying measurements and appearance, and documenting inspection results with a high level of accuracy and consistency. • Perform detailed visual inspections of jewelry products to identify defects such as scratches, discoloration, missing components, and imperfections in overall finish quality., • Verify product specifications, measurements, and appearance against established quality standards and customer requirements., • Use magnifiers, microscopes, calipers, and other precision inspection tools to examine gemstones, metal components, clasps, settings, and assembled pieces., • Inspect gemstones and metal parts for proper placement, alignment, security, and overall craftsmanship., • Review assembled jewelry pieces to confirm accuracy, completeness, and adherence to quality guidelines., • Document inspection results clearly and accurately using basic computer and documentation tools., • Report quality issues, trends, and concerns to supervisors in a timely manner to support corrective actions., • Sort, organize, and identify products that require rework or repair based on inspection findings., • Follow established quality procedures, work instructions, and safety guidelines during all inspection activities., • Maintain a clean, organized, and efficient work area to support consistent quality and productivity., • Work both independently and collaboratively with team members to meet production and quality targets., • Perform repetitive inspection tasks while maintaining focus, accuracy, and attention to detail over extended periods., • Strong attention to detail with the ability to identify minor cosmetic and workmanship defects in jewelry products., • Proficiency in quality inspection practices, including visual inspection and defect identification., • Experience or familiarity with jewelry inspection, including gemstones, metal components, clasps, settings, and assembled pieces., • Ability to use precision measurement tools such as magnifiers, microscopes, and calipers to verify product specifications., • Good manual dexterity and excellent hand-eye coordination for handling small, delicate components., • Basic computer skills and the ability to perform accurate documentation and recordkeeping of inspection results., • Ability to sit or stand for extended periods and perform repetitive inspection tasks while maintaining accuracy., • Capability to work independently with minimal supervision while also contributing effectively as part of a team., • Organizational skills to sort, track, and manage inspected products and items requiring rework or repair., • High school diploma or equivalent preferred, demonstrating foundational education and literacy., • Previous experience in quality inspection, production, assembly, or manufacturing environments is a plus., • Background or interest in jewelry, gemstones, or fine metalwork is beneficial., • Experience with quality control processes, procedures, or standards in a production setting., • Strong communication skills to clearly report issues and collaborate with supervisors and team members., • Ability to follow detailed work instructions, quality procedures, and safety guidelines consistently., • Comfort working in a structured, process-driven environment with defined quality expectations. You will join a quality-focused organization that values precision, craftsmanship, and teamwork. The company promotes a supportive environment where attention to detail and pride in workmanship are recognized and appreciated. You will have the opportunity to develop specialized skills in jewelry inspection, contribute directly to customer satisfaction, and work in a setting that emphasizes reliability, consistency, and professional growth. This role is based in a production or inspection environment focused on finished jewelry products. You will work with small, detailed components and use tools such as magnifiers, microscopes, calipers, and other precision instruments on a daily basis. The position involves sitting or standing for extended periods and performing repetitive inspection tasks while maintaining a high level of focus and accuracy. The work area is organized and process-driven, with established quality procedures, work instructions, and safety guidelines that you are expected to follow. The environment encourages cleanliness, organization, and collaboration among team members to ensure consistent quality output. This is a Contract position based out of Seattle, WA. The pay range for this position is $24.00 - $26.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) This is a fully onsite position in Seattle, WA. This position is anticipated to close on Sep 4, 2026.

Kirkland, WA Job Status: Part-Time Warby Parker is searching for a well-rounded Sales Advisor to help us deliver the best possible service to each and every one of our customers. In supporting our retail locations across the country (and Canada!), Advisors have a direct, immediate impact on the success of Warby Parker through customer interactions, process ideation and improvement, and various special projects. We've grown to who we are today thanks in no small part to them! In this role, you'll get to show folks firsthand what Warby Parker is all about while making glasses shopping a goosebump-inducing experience. Sound cool? Read on! What you'll do: • Communicate Warby Parker's values and brand philosophy on the sales floor, • Delight customers through nothing-but-wonderful service, • Demonstrate unparalleled product knowledge and offer exceptional style advice, • Dream up ways to reinvent retail and the glasses-shopping experience, • Anticipate the needs of your team and customers alike, and be at the ready to lend a hand, • Help foster an inclusive culture by treating customers and colleagues with respect Who you are: • Excited to work and learn at a fast-paced, high-growth company, • Backed by customer-facing experience in a service-minded environment, • A proactive, adaptable problem-solver who reacts quickly in unexpected situations, • A positive team player who leads by example, • Able to effectively communicate with a variety of people, • Organized, attentive, and detail-oriented, • An energetic self-starter with an entrepreneurial spirit, • Interested in fashion and technology, • Not on the Office of Inspector General's List of Excluded Individuals/Entities (LEIE) Some benefits of working at Warby Parker for part-time employees: • Employee Assistance Program (EAP), • Employee Stock Purchase Plan, • Free eyewear, • Paid sick leave (accrue 1 hour of paid sick leave time for every 30 hours worked up to a maximum of 80 hours), • And more (just ask!) Washington Pay Range $18 - $18 USD Warby Parker is proud to be an equal opportunity employer. We seek to promote equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, military status, or any other applicable legally protected characteristic. About Us: Warby Parker was founded with a mission: to inspire and impact the world with vision, purpose, and style. We're constantly asking ourselves how we can do more and make a greater impact, and that starts by reimagining everything that a company and industry can be. We want to demonstrate that a business can scale while doing good in the world, without charging a premium for it. And we've learned that it takes creativity, empathy, and innovation to achieve that goal. Since the day we launched in 2010, we've pioneered ideas, designed products, and developed technologies that help people see. We offer everything you need for happier eyes at a price that leaves you with money in your pocket, from designer-quality glasses and contacts to eye exams and vision tests, and you can meet us online, at our stores, or even in your home. Wherever and whenever you need it, we're there to make exceptional vision care simple and accessible. (Delightful, too.) Ultimately, we believe in vision for all, which is why for every pair of glasses or sunglasses we sell, a pair of glasses is distributed to someone in need through our Buy a Pair, Give a Pair program.

Kirkland, WA Job Status: Full-Time Warby Parker is on the lookout for a self-motivated Sales Supervisor to help create nothing-short-of-amazing experiences for our customers. Across all of our retail locations in the U.S. and Canada, Sales Supervisors contribute to the success of our business firsthand through face-to-face customer interactions. In this role, not only will you share Warby Parker's story and mission on the sales floor, but you'll also take part in process ideation and improvement, as well as a slew of special projects. Sound right up your alley? Keep reading! What you'll do: • Communicate Warby Parker's values and brand philosophy to customers, • Promote an efficient, inclusive, and service-minded retail environment, • Demonstrate exceptional product knowledge and offer thoughtful, honest style advice, • Dream up innovative and entrepreneurial ways to reinvent the glasses-shopping experience, • An upbeat, flexible team player who leads by example, • Lead the selling on the floor, front-of-house operations, and team touch-bases when a manager is not present, • Open and close the store, • Help foster an inclusive culture by treating customers and colleagues with respect Who you are: • Backed by professional retail experience at a customer-focused company, plus 6+ months in a management position, • Equipped with exceptional interpersonal and communication skills to deliver top-notch customer service, • Cool under pressure and able to adapt quickly, • A go-getter with an entrepreneurial spirit, • Curious and eager to learn, • A team player who is passionate about helping customers and teammates alike, • An innovative, proactive problem-solver, • Proud of your work and self-motivated to be a top performer, • Able to bring a positive, fun energy to the workplace, even when working long hours, • Not on the Office of Inspector General's List of Excluded Individuals/Entities (LEIE) Some benefits of working at Warby Parker for full-time employees: • Health, vision, and dental insurance, • Life and AD&D Insurance, • 5-10 vacation days per year (after waiting period, depending on tenure and hours worked), • Paid sick leave (accrued at a rate of 1 hour per every 26 hours worked), • 5 Paid Holidays, • Retirement savings plan (401(k)), • Parental leave (non-birthing parents included), • Short-term disability, • Employee Stock Purchase Plan, • Employee Assistance Program (EAP), • Bereavement Support, • Optical Education Reimbursement, • Free eyewear, • And more (just ask!) Washington Pay Range $20 - $23 USD Warby Parker is proud to be an equal opportunity employer. We seek to promote equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, military status, or any other applicable legally protected characteristic. About Us: Warby Parker was founded with a mission: to inspire and impact the world with vision, purpose, and style. We're constantly asking ourselves how we can do more and make a greater impact, and that starts by reimagining everything that a company and industry can be. We want to demonstrate that a business can scale while doing good in the world, without charging a premium for it. And we've learned that it takes creativity, empathy, and innovation to achieve that goal. Since the day we launched in 2010, we've pioneered ideas, designed products, and developed technologies that help people see. We offer everything you need for happier eyes at a price that leaves you with money in your pocket, from designer-quality glasses and contacts to eye exams and vision tests, and you can meet us online, at our stores, or even in your home. Wherever and whenever you need it, we're there to make exceptional vision care simple and accessible. (Delightful, too.) Ultimately, we believe in vision for all, which is why for every pair of glasses or sunglasses we sell, a pair of glasses is distributed to someone in need through our Buy a Pair, Give a Pair program.

Looking for a quality inspection opportunity at a fast paced, high impact team? Discover this great opportunity at our Joint Base Lewis-McCord, WA location. Bring your expertise to make an impact on our military defense and safety of our soldiers by discovering your new role supporting this critical mission. This position is contingent upon your ability to maintain your Secret clearance. Serco supports the US Army as a prime contractor for their Next Generation Command and Control (NGC2) contract which supports integrating capabilities that enable the service to employ Command Posts (CP) across the operational spectrum. Our team develops, integrates, and maintains modern and mobile solutions for an integrated CP infrastructure. You will be part of a team that works closely with the customer and other Serco functional area teams to deliver quality systems and associated supporting documentation. The team has been recognized by the Army Customer and the industry for their outstanding contributions to the contract and program. In this role, you will supervise others as well as participate in the following: • Visually inspects products according to specifications to ensure conformity to established standards, using a variety of measuring instruments, calipers, micrometers, and gauges, • Recommend adjustments to production processes and procedures to improve quality and efficiency, • Adhere to all processes and procedures per established Quality Management System., • Complete basic electrical and mechanical testing of subsystem assemblies between manufacturing processes and integration to ensure the accuracy of final products, • Inspect platforms/vehicles to ensure equipment is ready for subsystem integration, • Assist in developing and maintain accurate records of inspection results, test data, and quality control processes, reporting findings to management, • Review inspection results for trend analysis and root cause analysis to propose corrective actions, • Collaborate with subject matter experts To be successful in this role, you will have: • An active Secret clearance., • A HS Diploma/GED with 5 years of experience as a product quality control inspector, • 2 years of experience being a Quality Control Supervisor and supporting military contracts, • Experience and/or training in: electronics, vehicle operation, electrical wiring, and product assembly., • The ability to read engineering drawings and interconnection diagrams, • Comfortable standing or walking for long periods of time, • Ability to use measuring devices like gauges, meters, and calipers., • Demonstrate technical proficiency., • Problem-solving skills, • Effective written and oral communication skills, • The ability to travel up to 75% of the time. Additional desired experience and skills: • Understanding of an ISO 9001:2015 QMS system, • Associate's degree in engineering or technical discipline preferred, • Physical ability to lift heavy objects., • Familiar with Lean Six Sigma or process improvement concepts If you are interested in supporting and working with our military and sailors and a passionate Serco team- then submit your application now for immediate consideration. It only takes a few minutes and could change your career!

Salary $56.83 - $72.03 Hourly Location Brightwater Treatment Plant - 22505 State Route 9 SE, Woodinville, WA Job Type Career Service (Exec) Job Number 2026-27807 Department DNRP-Natural Resources & Parks Division Wastewater Treatment Opening Date 08/24/2026 Closing Date 9/14/2026 11:59 PM Pacific FLSA Non-Exempt Bargaining Unit W4 : TEA-WTD, DNRP-Staff Full- or Part-Time Full Time Hours/Week 40 hours/week This posting is open to all qualified candidates. This role offers a dynamic opportunity for a skilled electrical and/or instrumentation professional to apply their expertise, expand their capabilities, and showcase strong leadership in a position that plays a vital part in WTD's construction project oversight efforts. About the Role: This role is the onsite inspector ensuring construction is per the drawings, specs, and electrical code. This role primarily works in WTD's treatment plants and pump stations repairing and retrofitting an aging infrastructure to ensure our product stays in the pipes. Role varies from electrical to instrumentation inspection and integration. About the Team: Our team is dedicated to ensuring quality construction is integrated into our system. The Electrical inspector is part of an inspection team that consists of Mechanical and Civil/Structural inspectors and Project Representatives. We lead inspections of Capital construction projects updating or replacing our aging system throughout the east side of King County. This includes work in pump stations, conveyance systems, and treatment plants protecting the waters of Puget Sound. Contracts vary in size from smaller work orders to large contracts over $100M. Commitment to Equity, Racial and Social Justice: King County, named after Dr. Martin Luther King, Jr., is a diverse and vibrant community that represents cultures from around the world. Our True North is to create a welcoming community where everyone can thrive. We prioritize equity, racial and social justice, making it a foundational and daily expectation for all employees. As a Wastewater Construction Management III - Electrical Inspector, you will actively apply these principles in all aspects of your work. Learn more about our commitment at http://www.kingcounty.gov/equity . Apply now for a rewarding career at the W astewater Treatment Division of King County Department of Natural Resources & Parks (DNRP). Join our talented workforce in protecting and restoring the natural environment and promoting more resilient, sustainable, and equitable communities. Enjoy training, comprehensive benefits , and growth opportunities. What You Will Be Doing: • Perform inspection and testing of electrical and instrumentation and control (I&C) installations for assigned construction contracts/projects. Ensure compliance with contract documents and code requirements. Construction work could occur on any portion of the Wastewater Treatment Division infrastructure including treatment plants, pump stations, and conveyance system (WTD's infrastructure is located in northern Pierce County, King County, and southern Snohomish County). Coordinate work with other inspection staff. Provide lead direction to lower-level staff. Support the administration of small electrical specialty wastewater treatment construction contracts or the electrical discipline on larger contracts., • Assist in the review of contractor submittals for electrical construction work for conformance with contract specifications and drawings., • Prepare inspection and testing reports, field notes, and other required reports; support change order preparations, contract dispute resolution and closeouts as required., • Implement a defined program of inspection, sampling and testing and startup, and commissioning of facilities and equipment to ensure efficient and effective operations and to identify problems and recommend corrective action., • Review and interpret engineering design drawings and specifications to ensure compliance with acceptable construction methods and wastewater treatment requirements. Qualifications You Bring: • Experience in the construction or advanced maintenance of electrical equipment in a water, wastewater, or industrial setting., • Demonstrated ability to read and interpret engineering drawings and contract specifications, specifically in the field of electrical and I&C., • Ability to inspect materials and workmanship and recognize deficiencies and omissions requiring correction., • Knowledge of relevant construction laws, ordinances, codes, regulations, specifications and standards., • Knowledge of electrical and I&C systems, especially as applied to wastewater treatment, conveyance and/or other heavy industrial mechanical facilities. Experience in troubleshooting and starting up of I&C systems., • Ability to work independently/reliably, without close supervision. Competencies You Bring:, • Tech Savvy: Anticipating and adopting innovations in business- building digital and technology applications., • Manages Complexity: Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems., • Action Oriented: Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Ensures Accountability: Holding self and others accountable to meet commitments., • Manages Conflict: Handling conflict situations effectively, with a minimum of noise. It Would Be Great If You Also Bring:, • Knowledge of Instrumentation and Controls in a wastewater system., • Knowledge of other construction trades. Physical Requirements:, • Works in an active construction and industrial site at all times. May be required to climb ladders, work from elevated platforms, and confined spaces. Workplace Exposures:, • Exposure to loud noises, confined spaces, wastewater, and other possible construction hazards in a wastewater treatment facility. Working Conditions: • Work Location: Brightwater Treatment Plant - 22505 State Route 9 SE, Woodinville, WA 98072., • Work Schedule: This full-time position works a 40-hour work week. This position is covered under the provisions of the Fair Labor Standards Act (FLSA) and is overtime eligible, • Union Representation: This position is represented by Technical Employees Association (TEA).Application and Selection Process: We welcome applications from all qualified applicants. We value diversity, diverse perspectives and life experience and encourage people of all backgrounds to apply. Application materials will be screened for clarity, completeness and alignment with the experience, qualifications, knowledge, and skills essential for this role to determine which candidates may be invited to participate in a technical assessment and one or more panel interviews. Anticipated Timeline for this recruitment (dates subject to change): • Panel Interview (in-person/onsite at Brightwater Treatment Plant) - late September 2026 To apply, submit a:, • Complete Application, • Optional Resume - will be reviewed if submitted, • Optional Cover Letter - will be reviewed if submitted, • Responses to the supplemental questions Note: Additional documents won't be considered during minimum qualification screening. Who to Contact: For more information regarding this recruitment, please contact Rodney Dungo, HR Analyst at rdungo@kingcounty.gov. Discover More About the Wastewater Treatment Division: Visit our website and check us out at Facebook , X (formerly Twitter) , Instagram , YouTube , and the WTD Blog . Discover More About DNRP: Visit our DNRP website , explore an interactive map of our recent accomplishments and check us out at Facebook , X (formerly Twitter) , LinkedIn , TikTok , Instagram , YouTube and Keeping King County Green News . Sign up for Job Alerts to be notified of additional career opportunities with King County. Select the Natural Resources category for DNRP opportunities and explore other categories of interest. Are you ready to make a difference? Come join the team dedicated to serving one of the nation's best places to live, work and play. Application Process If you are interested in pursuing this position and supporting King County's vision for unified, equitable, and high-performing government, please follow the application instructions carefully. Provide us with your work history as applicable, ensuring that you provide details that highlight your ability to fulfill the requirements for this position. If you need this announcement in an alternate language or format, or you would like to request accommodation or assistance in the application or assessment process, please contact Rodney Dungo at rdungo@kingcounty.gov. King County's Vision, Mission, and ACTIVATE Values unite us. King County serves residents with a relentless sense of urgency, delivering on commitments with transparency and accountability. We are action-oriented, creative problem solvers who collaborate across roles, engage directly with communities, and challenge the status quo to achieve meaningful impact. As a unified team, we uphold high ethical and stewardship standards, embrace change, stay curious, and continuously improve. Across all interactions, we listen first, act quickly, and stay aligned as a team to earn and sustain public trust. Learn more about our Vision, Mission, and ACTIVATE Values here and visit our Why work at King County page here . King County is an Equal Employment Opportunity (EEO) Employer No person is unlawfully excluded from employment opportunities based on sex, race, color, national origin, ethnicity, religious affiliation, disability, sexual orientation, gender identity or expression, age except by minimum age and retirement provisions, pregnancy, status as a family caregiver, parental status, marital status, military status or status as a veteran who was honorably discharged or who was discharged solely as a result of the person's sexual orientation or gender identity or expression, citizenship or immigration status, genetic information, or other protected class. However, to the extent that distinction or differential treatment on the basis of citizenship or immigration status is authorized by either federal or state law, regulation, or government contract, it is not an unfair practice. Our EEO policy applies to all employment actions, including but not limited to recruitment, hiring, selection for training, promotion, transfer, demotion, layoff, termination, rates of pay or other forms of compensation. King County offers a highly-competitive compensation and benefits package designed to meet the diverse needs of our employees and support our employees' health and well-being. Eligible positions receive the following benefits and have access to the following programs: • Excellent medical, dental, and vision coverage options: King County provides eligible employees with options, so they can decide what's best for themselves and their eligible dependents, • Life and disability insurance: employees are provided basic coverage and given the opportunity to purchase additional insurance for both the employee and eligible dependents, • Retirement: eligible King County employees may participate in a pension plan through the Washington State Department of Retirement Systems and a 457(b) deferred-compensation plan, • Transportation program and ORCA transit pass, • 12paid holidays each year plus twopersonal holidays, • Generous vacation and paid sick leave, • Paid parental,family and medical, and volunteer leaves, • Flexible Spending Account, • Wellness programs, • Onsite activity centers, • Employee Giving Program, • Employee assistance programs, • Flexible schedules and telecommuting options, depending on position, • Training and career development programsFor additional information about employee benefits, visit our Benefits, Payroll, and Retirement Page . This is a general description of the benefits offered to eligible King County employees, and every effort has been made to ensure its accuracy. If any information on this document conflicts with the provisions of a collective bargaining agreement (CBA), the CBA prevails. NOTE: Benefits for Term Limited Temporary (TLT) or Short Term Temporary (STT) positions, including leave eligibility and/or participation in the pension plan through the Washington State Department of Retirement Systems, will vary based upon the terms and details of the position.Short Term Temporary positions are not eligible for an ORCA transit pass. For inquiries about the specifics of this position, please contact the recruiter identified on this job posting. recblid 1nn0rr2103bm510qs77bl6ruax1q90

Construction Quality Control / Quality Assurance - Tukwila, Washington.Intertek, a leading provider of quality and safety solutions to many of the world's top-recognized brands and companies, is actively seeking a Construction Quality Control / Quality Assurance Inspector to join our Professional Se

EOSOL Group is seeking a Civil Quality Inspector to support on-site civil construction activities on a utility-scale wind project.

Job Description WEMCO is looking for an experienced and motivated Field Service Technician capable of working with minimal supervision. This position will be based out of the Greater Seattle Area. Job Purpose: Under the general supervision of WEMCO Inc.’s Part Sales & Services Coordinator, the Field Service Technician will be a front-line employee with direct customer contact. Your primary purpose will be to maintain and repair the heavy equipment used in all construction, agriculture, mining, logging, materials handling, and related industries with a focus on Overhead Crane service and inspection. Job Responsibilities: • Act as the primary customer support contact to diagnose and execute complex mechanical and electrical repairs to products at the customer’s site, • Establish and continually develop productive customer relations and ensure prompt and efficient attention to customer needs, • Apply the use of specialized tools to work efficiently; you will also be required to procure and use your own personal set of hand tools – WEMCO will not supply these for you, • Obtain product technical issue information and utilize available resources, including data management tools, balancing timeliness of customer response with investigation efforts; capture all troubleshooting steps in the appropriate database to ensure seamless transitions and accurate response to service calls promptly, • Translate customer complaints to develop a troubleshooting plan; troubleshoot issues following proper workflows and procedures with specialized equipment such as mechanical and electronic service tools, and diagnose failed components to enable a successful repair; validate repairs by duplicating complaint to ensure it has been resolved; document the results of troubleshooting in business systems to communicate what has been done for payment and historical tracking, • Repair and maintain mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassemble and assemble engines or power generators by following guidelines and using the required tools to ensure a clean and organized environment; inspect and replace parts and components following re-use guidelines to minimize customers cost of ownership; perform progressive damage checks following guidelines to restore to the pre-failure condition, • Perform preventative maintenance activities as per documented schedules and standards on related components in the field, • Identify additional sales and service opportunities with the customer by educating customers about WEMCO’s products and services as well as industry regulations, • Ensure that all services are completed efficiently, on time, and correctly according to specification, • Diagnose problems and estimate the repair costs, • Complete any necessary training that is in line with both skill and business requirements, • Maintain service vehicle and tools for cleanliness and proper operation, • Report any issues or incidents to their supervisor, • Take and read measurements using various measuring tools including micrometers, calipers, & gauges to ensure part dimensions, features, and tolerance requirements are met per print specification, • Provide maintenance expertise, troubleshooting, service, and installation on overhead cranes involving mechanical and electrical skills while returning cranes to service in a quick and timely manner, • Inspection of overhead cranes to conform to OSHA, ANSI, ASME, CMAA, and other related specifications., • Test and commission new and used equipment in house as well as in the field., • Educate customers about mandated requirements for inspection criteria on overhead cranes., • Maintain your own schedule of crane inspections and service with a Corporate Calendar and dispatch yourself as needed to fulfill customer needs., • Complete paperwork and time cards accurately so that we maintain compliance with our AS9100 and ISO requirements., • Be willing to study for and pass the Crane Tech Certified Overhead Crane Inspector exam, • Be willing to study for and pass the NCCO Certified Overhead Crane Inspector exam, • You must also provide clothing that will protect you from all four seasons weather conditions, • WEMCO will never put you at risk in a dangerous weather situation, but we ask that you provide clothing that will protect you from rain and snow Job Requirements: • Territories in which service work will be conducted include but are not limited to the Pacific Northwest. Out of town overnight work may be required., • Minimum of 3 years of prior experience in a related field service role is preferred, • High School Diploma, GED, or vocational diploma from a relevant technical institute is required, • Prior experience with Microsoft Office products is preferred: Word, Excel, & Outlook, • VFD parameter setting adjustment and tuning experience is preferred, • A valid driver’s license with an acceptable driving record is required., • Class-A CDL endorsement is desired but not required., • Equipment troubleshooting and diagnostic experience, • Must be committed to workplace safety – the safety of yourself, your co-workers, and our customers is of the utmost importance, • Excellent oral and written communication skills, • Ability to interact with customers in a positive and professional manner, • Experience using pneumatic, electrical, and manual tools, • Intermediate knowledge of assembly materials, metal types, and material properties, • Must be comfortable working at heights, • Must have, or have the ability to obtain a US Passport Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position involves work at job sites where work will be performed both indoors and outdoors. The employee must frequently lift or move up to 25 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly required to sit and stand, walk, use fine finger manipulation, use hands to handle and grasp, reach with hands and arms, and talk or hear. The employee is occasionally required to climb and balance, bend, stoop, twist, and/or crouch. Benefits: • 401k Retirement Plan, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Other Supplemental Insurance, • Employee Referral Program, • Paid Time Off, • Holiday Pay, • Company Provided Service Truck, • Company Gas Card for Service Truck

Conduct inspections and tests, documenting results and determining if quality of work meets standards and requirements IAW Quality Management System (QMS). TITLE: Quality Control Inspector. REPORTS TO: Quality Control Supervisor.

What does the Quality Inspector do? You'll inspect products throughout production, perform quality checks, document inspection results, and help ensure manufactured products meet company quality standards. Pay for the Quality Inspector:. All StarZ Staffing is hiring a Quality Inspector for an immedi

Construction Quality Assurance WABO Inspector. Preferred but not limited to) Previous experience in a project quality role. Quality Assurance/Control Inspections.

Quality Assurance (QA) Data Engineer to join our.

Data quality is the bottleneck of the AI era. Soda is the data quality layer for Disney, Ralph Lauren, CBRE, HelloFresh, 2K Games, and Nubank. Familiarity with data quality, governance, or observability tools.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. Maintain a clean work environment by removing all Foreign Object Debris (FOD) to ensure safety and quality.

Schwartz Brothers Restaurants is a locally owned and operated, innovative business with strong community involvement, offering our guests consistent high-quality products and service at a fair value. The food safety and quality technician is responsible for monitoring the manufacturing and packaging

In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory

While performing these tasks the individual needs to visually check components for quality defects and must be able to count the correct amounts of components to assemble/package correctly. Meet quality control standards for each assembled and packaged product. Attention to detail to meet quality st

Aerotek - - Responsibilities: Assemble mechanical and electrical sub-assemblies; Install PCB assemblies into product chassis; Wire harnessing and soldering SMT/through-hole; Perform functional testing and operate test equipment; Maintain calibration and perform preventative maintenance.

Verstela - - Responsibilities: Perform finish assembly processes on aerospace products; Follow job traveler instructions using hand tools, bonding adhesives, and assembly jigs; Hand wrap insulation blankets using utility knives, foam insulation, and insulation tape; Perform light sanding and abradi

Aerotek - - Responsibilities: Assemble components and equipment per work instructions; Use hand and power tools safely; Complete sub-assemblies and multi-step builds; Inspect products for quality and defects; Move materials and products through facility.

While performing these tasks the individual needs to visually check components for quality defects and must be able to count the correct amounts of components to assemble/package correctly. Meet quality control standards for each assembled and packaged product. Attention to detail to meet quality st

Aerotek - - Responsibilities: Assemble electronic components, circuit boards, and wiring harnesses following engineering drawings, schematics, and work instructions; Solder through-hole and surface-mount components to IPC standards; Inspect and verify completed assemblies meet quality and functiona

Aerotek - JobID: JP-005851092 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

Aerotek - - Responsibilities: Assemble small medical device components and valves using hand tools; Read blueprints, drawings, and manufacturing work instructions; Inspect components for quality and accuracy throughout assembly; Follow cleanroom protocols and manufacturing procedures; Document proc