Quality inspector jobs in Houston, TexasCreate job alerts

Overview: Sun Auto Tire & Service Join a Team That Respects Your Skill and Fuels Your Future! Sun Auto Tire & Service, a nationwide leader in automotive services. From coast to coast, we’re committed to integrity, excellence, and developing our people. As a Senior Automotive Technician, you will play a key role in diagnosing and repairing customer vehicles with accuracy, efficiency, and attention to quality. You’ll utilize your technical expertise to perform advanced diagnostics and repairs while ensuring every vehicle meets MAP guidelines and dealership, manufacturer, and company repair standards. Incredible Pay Awaits: $25.00/Hr. – $45.00/Hr. (flag rate), Depending on your experience and certifications. Benefits: • Closed Sundays, • Competitive Bi-Weekly Pay, • Tuition Reimbursement, • Paid Vacation and Sick Time, • 6 Paid Holidays, • Medical, Dental and Vision Insurance, • Life Insurance (Company paid), • 401(k) Retirement Savings Plan with Company Match, • Discounted Services on Personal and Immediate Family Vehicles, • Opportunity for Advancement!!! Principal Duties and Responsibilities: • Diagnoses vehicles according to the appropriate level of certifications/experience., • Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy, • Performs complex and heavy-duty repairs, • Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers, • Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file, • Follows all safety procedures and reports any concerns to direct supervisor, • Ability to work flexible schedules, including weekends as needed. But never Sundays! Other duties as assigned by direct supervisor, • Adheres to Sun Auto’s core values, all company policies and procedures as outlined in the Employee Handbook Qualifications: • Previous automotive technician / mechanic experience required, • ASE certifications in lieu of experience, • Ability to demonstrate proper use of computerized equipment for diagnostics, • Valid Driver’s license, • Must be at least 18 years of age, • Possess State Inspector License or ability to obtain a State Inspector license (in applicable locations) within 30 days of hire date, • High School Diploma or equivalent; Technical School experience preferred Working Conditions and Physical Demands: The Senior Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Senior Automotive Technician must be able to meet the following physical requirements: • Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building, • Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently, • Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently., • Communicate with customers and shop personnel Get paid like a pro, treated like a leader, and still enjoy your Sundays. ???? Apply today to start your journey with Sun Auto! Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

This is a full time, day shift specialist position for Blood Bank works Monday-Friday from 6:00am-2:30pm with weekend rotation. At Houston Methodist, the Medical Laboratory Scientist Specialist position is responsible for performing both routine and complex analyses at a subject matter expert level, which necessitates knowledge of laboratory techniques, principles, and equipment and their interrelationship. This position exercises good judgment by using critical thinking skills and takes an active role in problem solving for the laboratory section. The Medical Laboratory Scientist Specialist also ensures that specimens are accessioned and processed expeditiously in order to deliver quality laboratory results in an effective and cost efficient manner. Additional responsibilities include serving as a role model and preceptor for staff and leading quality control initiatives for section. FLSA STATUS Non-exempt QUALIFICATIONS EDUCATION • Bachelor’s degree EXPERIENCE • Three years of experience in a clinical laboratory as a Medical Laboratory Scientist/Medical Technologist or comparable role. May consider HM employee with two years of experience, to include a minimum of one year as a HM Medical Laboratory Scientist, and who demonstrates progressive responsibilities. LICENSES AND CERTIFICATIONS Required • Must have one of the following required certifications: • Certified as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or categorical certification by Board of Certification (ASCP), • Certified as a Medical Technologist by American Medical Technologists (AMT), • Certified as a Clinical Laboratory Scientist by National Credentialing Agency for Laboratory Personnel (NCA) • Specialist in Blood Banking (SBB) certification from ASCP is preferred SKILLS AND ABILITIES • Demonstrates the skills and competencies necessary to safely perform the assigned job, determined through on-going skills, competency assessments, and performance evaluations, • Sufficient proficiency in speaking, reading, and writing the English language necessary to perform the essential functions of this job, especially with regard to activities impacting patient or employee safety or security, • Ability to effectively communicate with patients, physicians, family members and co-workers in a manner consistent with a customer service focus and application of positive language principles, • Exhibits strong interpersonal, teamwork and leadership skills with all levels of the healthcare team and assures delivery of excellent customer service to all patients, visitors, physicians and co-workers, • Adapts to multiple ongoing priorities including organizing heavy workflow with minimal supervision, • Strong attention to detail and ability to achieve and maintain accuracy, • Ability to work independently and execute above average technical skills, • Demonstrates sound judgment and discretion to recognize problems ranging from simple to complex, identify causes and take corrective action, • Possesses basic computer knowledge; operates multiple computer systems to include, Hospital/Laboratory Information Systems and Office software to maintain patient and testing records and other related documents, • Ability to recognize changes that are critical to patient care ESSENTIAL FUNCTIONS PEOPLE ESSENTIAL FUNCTIONS • Promotes a positive work environment and contributes to a dynamic, team focused work unit that actively helps one another to achieve optimal department results. Collaborates with all members of the patient care team by actively communicating and reporting pertinent patient care information and data in a comprehensive manner., • Orients, guides and mentors team members and students, to help build confidence and competency in skills, knowledge and abilities. Administers and grades staff competency assessments., • Participates in laboratory and organization wide initiatives. SERVICE ESSENTIAL FUNCTIONS • Performs qualitative and quantitative tests and examination using various analyzers and/or manual methods., • Sets pace for workload and troubleshoots workflow issues for laboratory section. Utilizes all available work time by assisting others and performing additional tasks., • Meets turnaround time expectations as defined by management. QUALITY/SAFETY ESSENTIAL FUNCTIONS • Performs the six elements of competency for test systems used to generate patient test results in all areas assigned to work., • Recognizes, investigates and correctly resolves test discrepancies. When problems arise, takes appropriate action to investigate and address and notifies management for follow-up., • Compiles and reviews monthly quality control data, to include actions for variances identified, and provides proper documentation of all variations. Oversees section compliance by reviewing and responding to College of American Pathologists (CAP) Accreditation Checklists questions/ findings. Completes online CAP Inspector Training., • Develops plan, leads implementation, and performs data analysis of validations. Coordinates instrument maintenance and repairs., • Independently handles resolution of complex problems and issues for section. Assists with policy review and submission. FINANCE ESSENTIAL FUNCTIONS • Adjusts work schedule to accommodate departmental/organizational needs. Appropriately utilizes the time recording system., • Uses resources efficiently; does not waste supplies. Actively participates in inventory management. GROWTH/INNOVATION ESSENTIAL FUNCTIONS • Generates and communicates new ideas and suggestions that will improve quality or service., • Seeks opportunities to expand learning beyond baseline competencies with a focus on continual development. SUPPLEMENTAL REQUIREMENTS • WORK ATTIRE, • Uniform: No, • Scrubs: Yes, • Business professional: Yes, • May require travel within the Houston Metropolitan area Yes, • May require travel outside Houston Metropolitan area Yes QUALIFICATIONS EDUCATION • Bachelor’s degree EXPERIENCE • Three years of experience in a clinical laboratory as a Medical Laboratory Scientist/Medical Technologist or comparable role. May consider HM employee with two years of experience, to include a minimum of one year as a HM Medical Laboratory Scientist, and who demonstrates progressive responsibilities. LICENSES AND CERTIFICATIONS Required • Must have one of the following required certifications: • Certified as a Medical Technologist, Clinical Laboratory Scientist, Medical Laboratory Scientist, or categorical certification by Board of Certification (ASCP), • Certified as a Medical Technologist by American Medical Technologists (AMT), • Certified as a Clinical Laboratory Scientist by National Credentialing Agency for Laboratory Personnel (NCA) • Specialist in Blood Banking (SBB) certification from ASCP is preferred Company Profile: Houston Methodist Willowbrook Hospital is a Magnet-recognized, not-for-profit, faith-based hospital that serves the growing Northwest Houston community. We are committed to providing quality, cost-effective health care in a compassionate environment for a full range of services, including emergency care, cardiology, orthopedics and sports medicine, comprehensive women’s services, neurology and neurosurgery, oncology, and primary and general medicine. Houston Methodist is an Equal Opportunity Employer.

Job Description Location: Houston, TX Employment Type: Full-time Lead, Influence, and Shape Building Safety as a Building Official Are you an experienced building professional ready to take the next step in your career? Join Aoka as a Certified Building Official (CBO) and lead a team of building inspectors while serving as a subject matter expert for our sales team — making a tangible impact on construction quality, safety, and code enforcement across DFW. Why You’ll Love This Role • Top Compensation: $90,000–$120,000 annually, reflecting your experience and leadership, • Comprehensive Benefits: Health, Dental, Vision, and 401(k) with 5% company match, • Work-Life Balance: Unlimited PTO (restrictions apply) and 13 paid holidays annually, • Career Growth & Authority: Supervise building inspectors, manage inspection programs, support sales as a subject matter expert, and influence company practices, • Tools to Succeed: Company-provided vehicle, access to ongoing training, and professional development opportunitiesWhat You’ll Do, • Supervise building inspectors and manage inspection programs, • Serve as a subject matter expert supporting the sales team, • Conduct client visits as needed for complex or escalated projects, • Administer and enforce municipal, state, and federal building codes, safety, energy, and accessibility standards, • Oversee issuance of building permits, plan approvals, occupancy certificates, and inspection reports, • Interpret complex codes and provide guidance to architects, engineers, contractors, and property owners, • Collaborate with fire, planning, zoning, engineering, and public works departments for coordinated code enforcement, • Manage appeals, code updates, and ordinance revisions, • Maintain accurate records and prepare reports on inspections, permitting, and code complianceQualifications, • High school diploma or GED required; Bachelor’s in Construction Management, Engineering, Architecture, or related field preferred, • ICC Certified Building Official (CBO) required; additional ICC certifications (Plans Examiner, Building Inspector) highly desirable, • Minimum 5–7 years of progressive experience in building inspection, code enforcement, or construction management, • Proven leadership and supervisory experience, • Strong analytical skills and ability to solve complex code-related issues under pressure About Aoka Aoka is a third-party municipal services provider serving federal, state, and local governments with code compliance, inspections, and consulting. Our proprietary software, VertexPlans, streamlines plan reviews, inspections, and reporting—ensuring faster turnaround times and better communication for our clients. Our Values: Continuous Improvement | Diversity of Thought | Empathy | Focus Our Vision: Empower clients with cutting-edge technologies and certified inspectors to deliver faster, smarter, and more reliable solutions. Apply Now to Join Our Team! Aoka is an equal opportunity employer (EEO), providing fair employment to all applicants and employees. Powered by JazzHR 5XxTs8Jp0W

We're looking for a Clinical Programs Manager Pharmacist, someone who's ready to grow with our company. In this position you will be a key driver of the pharmacy based clinical programs, disease management initiatives, provider education, and utilization management review. This is an individual contributor role without direct reports but requires indirectly leading initiatives and other staff. This position works closely with leadership and other key personnel to execute operational goals, ensure quality control, and identify process improvement opportunities. The role serves as are source and mentor to members, network providers, employees, and external collaborators. Think you've got what it takes? Job Duties & Responsibilities Independent utilization review of clinician administered drugs, and pharmacy appeals and collaboration with medical director team supporting benefit administration, policy development, and outcome tracking/reporting. Manage and enhance pharmacy-based clinical and quality improvement initiatives for the health plan impacting member benefits and health outcomes Ensure clinical projects and tasks are completed in a timely manner, and operational goals are met. Uses data to measure quantifiable outcomes and interventions, presenting progress to leadership team. Provides support staff with guidance to ensure achievement of goals. Manages and leads various clinical programs. Examples include but are not limited to: The Office of Inspector General (OIG) lock-in program, psychotropic medication utilization review (PMUR), retrospective drug utilization review (RDUR), prospective drug utilization review (PDUR), and others. Coordinates and participates in performance and/or quality improvement activities. Identify process improvement opportunities. With support from the leadership team, present and execute improvement plans. Participates in and leads multi-disciplinary work groups involving clinical operations, NCQA accreditation compliance, and pharmacy benefit manager (PBM) oversight. This includes internal and external stakeholders. Creates pharmacy guides and training content for internal and external stakeholders. Completes clinical and compliance tasks. Participate in the education of parents/members, providers, employees, and pharmacy students. Performs other essential functions. Skills & Requirements Bachelor's Degree Science in Pharmacy OR Pharm. D. Doctor of Pharmacy required RPH - Pharmacist by the State of Texas required 3 years Managed care experience at a health plan or PBM working in utilization management, analytics, formulary management, and/or clinical literature required 1 year Managed Care Pharmacy Residency experience preferred ABOUT US Founded in 1996, Texas Children's Health Plan is the nation's first health maintenance organization (HMO) created just for children. We provide STAR/Medicaid and Children's Health Insurance Program (CHIP) to pregnant women, teens, children and adults in Houston and surrounding areas. Currently, the Health Plan has more than 375,000 members who receive care from our network of more than 1,100 primary care physicians, 3,200 specialists, and 70 hospitals. Texas Children's Health Plan is also the largest combined STAR/CHIP Managed Care Organization in the Harris County service area. To join our community of 15,000+ dedicated team members, visit texaschildrenspeople.org for career opportunities. Texas Children's is proud to be an equal opportunity employer. All applicants and employees are considered and evaluated for positions at Texas Children's without regard to mental or physical disability, race, color, religion, gender, national origin, age, genetic information, military or veteran status, sexual orientation, gender identity, marital status or any other protected Federal, State/Province or Local status unrelated to the performance of the work involved.

Job ID: 523673 Exempt Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We’re more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We’re a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we’re leading the industry with innovation and a safety-first mindset. Job Summary Oldcastle Infrastructure, Inc. is currently seeking a Quality Control Manager for its Littleton Precast Facility. The successful candidate will report to the Area Quality Manager and will be responsible for overseeing the daily QC functions including process inspections, final product inspections, scheduling of support personnel, reporting on regular basis to management team with respect to processes improvements, repetitive quality defects, non-conforming products, and other quality concerns. The position requires the employee to perform a wide variety of Quality Control functions, supervise and work alongside 1-2 quality control technicians. Job Location • This position will be located at our plant in North Houston. Job Responsibilities • Pre-pour inspection checks on products as required, • Post-pour inspection checks on products as required, • Corrective Action Reports for nonconforming product, • Monitor production operations and reporting of deficiencies as required, • Daily wet tests for concrete production pours, • Material gradation testing as necessary, • Concrete compression tests, • Continuous Improvement Initiatives, • Record keeping of quality documents, reports, inspections, etc., • Maintain calibration and maintenance of lab equipment as required, • Maintain NPCA and DOT certifications, • Establish and maintain close relationship with DOT inspectors and auditors Job Requirements • Previous experience in precast concrete as inspector, • Support compliance with DOT and 3rd parties, • Previous experience managing team or quality control technicians, • 2-Year Technical College or Degree or equivalent hands-on building materials experience, • Ability to read and interpret manufacturing drawings, • Ability to use a variety of computer programs including Microsoft Office Products or similar programs, • Excellent organization and communication skills, • Self-motivated and strong ability to take initiative, • ACI Certification - Highly desired or ability to obtain in 3 mo., • NPCA Certification - Highly desired or ability to obtain in 3 mo. What CRH Offers You • Highly competitive base pay, • Comprehensive medical, dental and disability benefits programs, • Group retirement savings program, • Health and wellness programs, • An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. AI tools may be used in certain stages of the employment lifecycle, such as candidate review; however, all final employment decisions will be made by a person.

Company Description Ensolum, LLC is dedicated to providing sustainable environmental solutions using innovative, cost-effective, and forward-thinking technologies. We assist our clients in navigating environmental challenges to achieve a balance between economic resources and environmental responsibilities. Our services encompass a diverse range of offerings, including environmental site assessments, remediation, risk-based evaluations, industrial hygiene, stormwater compliance, air quality management, and biological resource services. With a strong focus on creativity and value, we aim to deliver effective solutions to both residential and business clients. Role Description Ensolum, LLC is seeking a Stormwater Inspector in the Greater Houston area. The role involves conducting stormwater inspections, ensuring compliance with environmental regulations, and reporting findings. Responsibilities include supporting environmental health and safety efforts, assisting in training activities, and collaborating with team members on best practices for environmental compliance. Qualifications • Demonstrated ability to work on-site and collaborate effectively with a team, • Strong organizational, communication, and problem-solving skills, • Currently enrolled in or recently completed a degree in Environmental Science, Engineering, or a related field, • Basic understanding of stormwater regulations and compliance is a plus

Job Description JOB TITLE: CUSTOMER SERVICE ADVISOR (CSA) Island Breeze Car Wash is a premier car wash and detailing service provider dedicated to delivering top-notch services and exceptional customer experiences. Our Lube services offer comprehensive car maintenance solutions, and we are looking for a dedicated and customer focused individual to join our team as a Customer Service Advisor. JOB PURPOSE: The Lube Customer Service Advisor is a critical role at the forefront of our services division, serving as the liaison between our customers and our service technicians. The CSA is the first point of contact for our customers, providing them with friendly and knowledgeable assistance throughout their service experience. This position requires an individual with a strong understanding of automotive maintenance services, excellent communication skills, and a commitment to customer satisfaction. DUTIES & RESPONSIBILITIES: • Customer Service: Greeting customers with a warm and welcoming attitude, addressing inquires, and providing accurate information about our services, promotions, and products. Build trusting relationships with customers by providing honest service recommendations and clear explanations of service work., • Service Coordination: Schedule and coordinate lube service appointments. Communicate with the service team to ensure timely and efficient service delivery. Monitor service progress and keep customers informed of any updates or delays., • Vehicle Inspection: Conducting basic vehicle inspections to identify potential maintenance needs and communicating findings to customers in a clear and understandable manner., • Sales Support: Assisting customers in selecting appropriate services and products based on their vehicles needs and manufacturer recommendations. Educate customers on the importance of regular vehicle maintenance and how our services can benefit their vehicles performance and longevity., • Cash Handling: Processing customer payments accurately and efficiently, handling cash, credit, and debit transactions, and maintaining proper cash handling procedures., • Administrative Duties: Maintain accurate records of customer interactions and transactions. Process payments and manage cash handling with accuracy. Ensure all customer information is entered correctly into the system., • Team Collaboration: Collaborating with technicians and other team members to ensure smooth workflow and exceptional customer service delivery., • Customer Satisfaction: Resolve customer complaints and concerns promptly and professionally. Ensure a high level of customer satisfaction by providing excellent service. Collect and analyze customer feedback to improve service quality., • Cleanliness and Organization: Maintaining cleanliness and organization of the shop and customer waiting areas, including restocking supplies and keeping workstations tidy., • High school diploma or equivalent; additional qualifications in customer service or automotive services preferred., • Proven experience in customer service, ideally in the automotive service industry., • Knowledgeable about vehicle lubrication systems and general maintenance services., • Strong interpersonal and communication skills, with the ability to convey technical information in an understandable manner., • Organized, with the ability to manage multiple tasks and prioritize in a fast-paced environment., • Enthusiasm for delivering exceptional customer experiences., • Flexibility to work weekends and holidays as needed., • Competitive salary based on experience and performance-based incentives., • Opportunities for professional growth and development., • Employee discounts on services and products, • Paid time off

Weld Inspector - Aerospace Level III About the Position: We are seeking a Level III Welding Inspector to join our team. The Aerospace Level III X-Ray Welding Inspector is responsible for overseeing and performing advanced nondestructive testing (NDT) on welded aerospace components using radiographic (X-ray) inspection methods. This role ensures compliance with customer, regulatory, and industry standards while supporting production, engineering, and quality operations. The Level III Inspector provides technical guidance, certifies personnel, develops procedures, and ensures that all radiographic inspections are performed accurately, safely, and consistently. A candidate for this position will be encouraged to take on as much responsibility as practical and will be expected to play a role in the manufacturing and implementation of parts that will support or be part of the Lunar program. This includes but is not limited to the Lunar Lander, Satellites, Payloads support, Test and Verification and others. Responsibilities: · Perform and interpret radiographic (X-ray) inspections on welded aerospace components in accordance with NAS 410, ASNT SNT-TC-1A, or equivalent standards. · Serve as Level III authority for radiographic testing (RT), including oversight of Level I and II NDT personnel. · Develop, authorize, and maintain NDT procedures, work instructions, and inspection techniques. · Review weld quality, evaluate discontinuities, and determine product acceptance based on engineering drawings, specifications, and applicable codes. · Lead and manage certification, training, and technical evaluations for NDT personnel. · Ensure all inspection activities comply with radiation safety protocols and maintain required documentation. · Collaborate with engineering and production teams to resolve weld and material quality issues. · Support MRB activities, root-cause investigations, and corrective action planning. · Maintain all NDT records, including film, digital archives, technique sheets, and calibration data. · Interface with customers, auditors, and regulatory bodies during assessments or program reviews. · Participate in continuous improvement initiatives for weld quality, inspection efficiency, and equipment capability. Requirements: · Current NDT Level III certification in Radiography (RT)in accordance with NAS 410, ASNT SNT-TC-1A, or equivalent. · 5+ years of experience performing radiographic inspection in aerospace manufacturing or repair environments. · Demonstrated expertise in weld evaluation, defect characterization, and radiographic interpretation. · Strong understanding of aerospace materials, welding processes, and associated discontinuities. · Ability to read and interpret engineering drawings, specifications, and GD&T. · Knowledge of radiation safety regulations and safe operating procedures. · Strong documentation, communication, and decision-making skills. Preferred Requirements: · Additional NDT certifications (VT, PT, MT, UT). · Experience with digital radiography (DR/CR) systems. · Knowledge of AWS D17.1, ASME standards, and aerospace welding requirements. · Experience with NADCAP audits and compliance. · Prior involvement in MRB processes, failure analysis, or advanced root-cause investigations

Job Description Master Technician / Automotive Mechanic – European & Domestic Vehicles Shipley Automotive – Rosenberg, TX | Pay: Flat Rate $45/hr | Schedule: Monday–Friday, 9 AM – 5 PM Shipley Automotive, a high-end European and Domestic repair and performance center serving the Rosenberg/Fulshear area, is seeking an experienced Master Technician / ASE Master Technician to join our growing team. We specialize in BMW, Mercedes-Benz, Porsche, Audi, Volkswagen, and other performance brands, offering dealership-level service in a clean, modern, and professional environment. The ideal candidate will have at least 3 years of experience as a Master Certified Technician, strong diagnostic and mechanical skills, and the ability to perform multi-point inspections, Texas state inspections, and complete vehicle diagnostics on European and Domestic vehicles. Responsibilities include performing precision repairs, advanced diagnostics, and maintenance work while maintaining a clean and organized workspace and communicating clearly with the service team. Candidates must have a valid driver’s license with a clean driving record, be able to pass random drug testing, and demonstrate professionalism, punctuality, and attention to detail. Pay is a flat rate system at $45 per hour based on performance and efficiency. Shipley Automotive offers a modern facility with premium tools, consistent workflow, and a culture built on integrity, craftsmanship, and excellence. Keywords: Automotive Technician, ASE Master, BMW Mechanic, European Auto Technician, Diagnostic Technician, State Inspector, Flat Rate Technician, Automotive Repair. Apply today and join Shipley Automotive—where precision meets passion. Company DescriptionShipley Automotive is a premium European and Domestic repair center built on integrity, craftsmanship, and passion. We specialize in brands like BMW, Porsche, Audi, and Mercedes-Benz, delivering dealership-level service in a professional, clean, and modern environment. Our team values precision, pride, and respect—no drama, no shortcuts, just quality work done right.Shipley Automotive is a premium European and Domestic repair center built on integrity, craftsmanship, and passion. We specialize in brands like BMW, Porsche, Audi, and Mercedes-Benz, delivering dealership-level service in a professional, clean, and modern environment. Our team values precision, pride, and respect—no drama, no shortcuts, just quality work done right.

Yulista Solutions LLC Regular PRIMARY FUNCTION: The Aircraft Mechanic III -performs a variety of simple to moderately complex tasks on airplane general, airframe and powerplant systems. This will be a night shift opportunity ESSENTIAL FUNCTIONS Aircraft Mechanic • Perform maintenance on aircraft, including mechanical systems, and/or ground support equipment., • Repair, inspect and maintain structural, mechanical and electrical elements of the aircraft., • Knowledgeable in the use of and be able to train others in the use of a wide variety of diagnostics devices, computers, hand, and mechanical tools., • Provide oversight and have the ability to direct and train others in the completion of aircraft related maintenance tasks., • May include Designated System Inspector (DSI) duties., • Troubleshoot systems as required to meet customer needs., • Document maintenance as per Quality Assurance (QA) and established regulatory requirements., • Perform regular Foreign Object Damage (FOD) walks., • Maintain tool control. Report missing, lost, found, or unattended tools to the supervisor. Inventory and inspect tools on a regular basis and replace worn or broken tools., • Comply with safety rules and regulations while performing day to day maintenance. Promptly report all accidents, injuries, safety violations, and/or unsafe practices or procedures to supervisor., • Use NASA's automated maintenance data system (NAMIS) to maintain equipment records. Enter in the maintenance records description of the work performed and verify the work was performed satisfactorily., • The Aircraft Mechanic may be required to perform other related duties to meet the ongoing needs of the organization., • Stores, handles, and disposes of hazardous waste and materials according to environmental standards., • Inspects structures and components and determines operational status. Interprets inspection findings and determines corrective action adequacy., • Posts entries and maintains maintenance and inspection records in NAMIS. Recommends methods to improve equipment performance and maintenance procedures., • Selects, uses, and cares for special tools, hand tools, and test equipment. SUPERVISORY RESPONSIBILITIES None KNOWLEDGE, SKILLS, & ABILITIES: • Beginner to intermediate computer skills specifically using Microsoft Office Suite; ability to learn additional computer skills or software programs. Working knowledge of advanced software applications is preferred, • Ability to enter data accurately into databases., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence, • Interpersonal skills are necessary to work effectively and cooperatively with all levels of management and staff. Will also routinely interact with other crew members, • Ability to use general office equipment such as fax, phone, copier, scanner, printers, etc., • Ability to follow a process., • Strong professional customer service skills, including active listening, prompt service and follow-up., • Strong decision analysis and problem solving skills; ability to draw conclusions and justify decisions. Must be able to communicate issues to management., • Ability to learn and understand corporate policies and procedures and how they relate to goals., • Ability to perform basic mathematical computations, • High degree of self-motivation and the ability to work independently, • Ability to multi-task, • Climbs on top of and down from aircraft using aircraft hand/foot holds, capable of lifting up to 25 lbs. overhead, on feet all day, walk up to 2 miles per day. QUALIFICATIONS: Aircraft Mechanic • High School Diploma or equivalent required., • May require a Federal Aviation Administration (FAA) Airplane and/or Powerplant certification or special skills and/or certifications., • 3+ years of aircraft maintenance experience with fixed wing commercial, Government or DOD aircraft required., • Experience supporting a NASA/DoD contract., • Knowledge of commonly-used concepts, practices, and procedures within the field required., • Must have the ability to obtain and maintain a Government Security Clearance, • May be required to travel domestically and internationally. PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice.

Oceaneering is a global provider of engineered services and products, primarily to the offshore energy industry. We develop products and services for use throughout the lifecycle of an offshore oilfield, from drilling to decommissioning. We operate the world's premier fleet of work class ROVs. Additionally, we are a leader in offshore oilfield maintenance services, umbilicals, subsea hardware, and tooling. We also use applied technology expertise to serve the defense, entertainment, material handling, aerospace, science, and renewable energy industries. The Quality Control Inspector is responsible for interpreting specifications to determine appropriate testing and inspection procedures, as well as the equipment required. This role ensures accurate documentation and tracking of non-conformance reports and materials. The inspector must be able to work independently with minimal instruction and supervision while maintaining compliance with quality standards. LOCATION: Requires daily onsite attendance; this is not a remote-work position. ESSENTIAL: • Responsible for performing inspections on materials, products, assemblies, sub-assemblies., • Ability to read drawings, comprehend specifications and tolerances, read dial indicators and digital gages, compare results with specifications and record test data, confer with engineers, technicians and production personnel as necessary., • Demonstrate advanced ability to perform dimensional checks and visual verifications of fabricated and machined parts to acceptance criteria., • Uses measurement, test equipment and functional gages to determine if product meets all stated requirements., • Validate the quality of machined and fabricated parts, and assemblies in terms of dimensional accuracy and visual verification according to acceptance criteria., • Ability to review data supplied with material and parts to acceptance criteria, such as: dimensional reports, traceability reports and certificates of conformity., • Liaise with suppliers as required to ensure good product, documentation and service quality is maintained., • Understand and adheres to requirements of Gage Calibration, and Measurement System Analysis (MSA)., • Develop and maintain inspection plans per drawing requirements., • Interpret inspection results., • Assists more experienced technicians and professionals in technical tasks., • Performs technical work tasks requiring moderate technical experience., • Checks in with supervisors routinely, successfully completes task as requested, and begins to think independently about solutions for recurring problems in equipment handling., • Elevates issue when beyond scope of position., • Applies routine techniques and standards under moderate supervision., • Shows initiative and enthusiasm to solidify foundational understanding of the work area, gain exposure to related work areas, and reach out for new skills., • Works under well-defined procedures and guidelines that require low levels of troubleshooting., • Mentors or gives technical guidance to junior inspectors and technicians., • Performs a range of tasks with autonomy and may act as a cross departmental technical lead., • Applies a range of techniques and standards autonomously., • Shall be utilized as subject matter expert in quality control techniques., • Displays advanced professional communication and interpersonal skills when exchanging information with peers and supervisors., • Often serves as a resource to others in the resolution of complex problems., • Ensure all existing working procedures, practices and systems are followed., • Ensure in date calibrated measuring equipment is used for performing inspection., • Must have a thorough understanding of advanced measurement techniques, and a basic understanding of Statistical Process Control., • Issues document, investigate, and track non conformances and inspection records in the following SmartSolve modules: Inspection Management, Non Conformance and Corrective Action/Preventive Action., • Shall be capable of completing inspections, such as: FAT, SIT, FAI, In-Process, Final, Receiving inspections., • Work as a team member when performing or witnessing inspection and/or testing for internal and external customers, third parties, customer's inspectors, and engineering/manufacturing representative., • Assist in developing and improving quality system procedures, work instructions, flow charts and associated process improvements., • Uses safe material handling and preservation techniques, such as, operating a forklift and jib cranes, packing/preservation to prevent deterioration or damage., • Product identification responsibilities include verification and / or physical product marking for traceability., • Support the customer satisfaction and loyalty processes., • Support the organization's drive towards excellence in Health and Safety performance., • Support includes but is not limited to participating in STOP observations, reporting HSE observations, attending HSE related meetings, supporting HSE improvement projects and any other related task deemed appropriate by the Manager. REQUIRED: • Minimum of 3-5 years of Quality Control experience and/or training; or equivalent combination of education and experience., • Proficient in the use of advanced quality inspection techniques., • Knowledge of ISO 9001 requirements., • Ability to perform dimensional checks and visual inspections of raw materials, fasteners, fabricated, and machined parts in accordance with acceptance criteria., • Skilled in reading dials and digital displays, comparing results to specifications, recording test and inspection data, and collaborating with engineers, technicians, and production personnel., • Associate's Degree or equivalent from a two-year college or technical school., • Knowledge of ISO 17020 and ISO 17025., • Knowledge in NDT methodologies., • Ability to work in a team environment, remaining attentive to ideas, recognizing responsibilities, and actively participating with others to accomplish assignments and achieve desired goals. PAY, BENEFITS AND WORK SCHEDULE: We offer a comprehensive and competitive benefits package. Employee benefits vary by role, however, may include Health and Wellness, Mental Health, Retirement Savings, Life and Disability, Paid Maternity and Parental Leave, Paid Time Off, Tuition Reimbursement, and an Employee Assistance Program. WORKING CONDITIONS: This position is considered SHOP WORK which is characterized as follows: • Generally, work performed indoors (80%) and occasional outdoors (20%). Hours of work depend on shift assigned., • Occasional exposure to airborne dust in the workplace., • Work surface is stable (flat). The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is considered MEDIUM work. • OCCASIONAL, • FREQUENT, • CONSTANT, • Lift 20-50 pounds., • Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands., • Identify color differences., • Wear PPE for skin protection., • Lift 10-25 pounds., • Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects., • Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead., • Operate a motor vehicle., • Lift up to 10 pounds., • Wear PPE protection for body, vision, and hearing protection. All qualified candidates will receive consideration for all positions without regard to race, color, age, religion, sex (including pregnancy), sexual orientation, gender identity,national origin, veteran status,disability, genetic information, or other non-merit factors. Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals.

Job Description Want to be considered for this opening immediately? Call our office at 713-680-9898! Job Description – Quality Control Lead/Inspector The Quality Control Lead/Inspector supports production operations by helping ensure products meet company and customer quality standards. This role includes inspecting products throughout the manufacturing process, reviewing specifications and drawings, completing quality documentation, and assisting with communication between departments regarding quality-related issues. Qualifications & Requirements • Manufacturing quality control experience preferred, including leadership or team coordination experience, • Experience with threaded products/components is a plus, • Ability to read technical drawings and use measuring equipment, • Basic math skills including fractions, decimals, and tolerances, • Strong communication, organization, and attention to detail, • Bilingual English/Spanish preferred, • Ability to work in a fast-paced manufacturing environment, • Ability to lift up to 50 pounds and work in indoor/outdoor conditions with exposure to noise, dust, fumes, and varying temperatures, • Inspect products and components to verify quality standards are met, • Assist with coordinating daily inspection activities and workflow, • Complete quality documentation and report nonconforming materials or processes, • Support continuous improvement and corrective action efforts, • Communicate with production, quality personnel, and other departments as needed Must be bilingual in Spanish and English Candidates already registered with us, please send an updated resume to and reference the job title. If you are not already registered, please apply by clicking the "Apply Now" button. #zr

Job DescriptionSalary: We offer competitive pay, comprehensive benefits, company matched 401k, and opportunities to build a rewarding career with Apave America Inc. Position Overview: The API 510/570/653 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifyingcompliance with industry regulations. Conduct Inspections and Assessments • Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage., • Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping), or API 653 (storage tanks)., • Document findings from inspections, including any defects or non-conformities., • Provide detailed reports that include photographic evidence, measurements, and recommendations for corrective actions., • Identify potential risks and hazards based on inspection findings., • Recommend corrective actions, including repairs, replacements, or modifications to maintain safety and integrity., • Supervise NDT methods (such as ultrasonic testing, radiographic testing, magnetic particle testing, or dye penetrant testing) to detect subsurface or surface defects., • Ensure that inspections and assessments align with all relevant regulatory standards and safety protocols., • Assist with regulatory audits and maintain compliance with industry standards to minimize downtime and potential hazards., • Work with engineers, maintenance teams, and management to develop inspection schedules and action plans., • Provide technical advice and guidance on repair and maintenance strategies., • Track and monitor equipment performance over time and report any changes or declines in condition., • Maintain necessary API certifications and participate in ongoing training to stay updated with the latest inspection standards, tools, and technologies., • Ensure that inspections are carried out according to established quality assurance standards and practices., • Verify that the equipment meets the required operational and safety standards before returning to service. Required Skills and Experience: • High School Diploma or equivalent is required., • Minimum of two (2) years' experience working with the 510, 570, and/or 653 certifications required., • Minimum of API 510 and 570 certifications are required., • Additional API 653 certification will be considered an asset., • Certifications in NDT methods (MT/PT/UTT) would be considered an asset., • Valid Drivers License and pre-access drug and alcohol testing required., • Pre-employment background checks will be required. Work Conditions: • Field duties require indoor and outdoor work in diverse industrial environments with varying climate conditions, • Interaction with other crew employees, as well as supervisors, client personnel and a wide range of stakeholders, • Working in a plant and/or shop area around production machinery with extreme noise levels, • Work from various levels of heights and/or confined spaces for long periods of time, • Wear safety equipment as required by the safety department for personal protection (PPE) Physical and Mental Requirements: • Ability to lift, move, and carry objects weighing 75lbs. or greater, • Must be able to walk, sit, stand, bend, reach, and climb, • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines, • Perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking and stooping, • Working extended hours and standing for extended periods of time, • Work in indoor and outdoor environments in conditions of extreme heat and/or cold, • Work in and near industrial hazards, • Must be able to walk and climb except when performing non-field duties, • Remain consistently active throughout shift, • Sufficient clarity of speech and hearing and other communication capabilities, with or without reasonable accommodation, which permits the employee to communicate effectively, • Sufficient vision (close vision and distance vision) or other powers of observation, with or without reasonable accommodation, which permits the employee to investigate, • Sufficient manual dexterity, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodation, which permits the employee to perform routine in-field or office duties and travel to off-site locations, • Must be able to wear safety equipment as required by the safety department for personal protection (PPE), • Ability to maintain focus and multitask effectively, • Exhibit sensible and responsible behavior, • Ability to work autonomously or within a team environment Benefits: • Dental Insurance., • Vision Insurance., • Health Insurance., • Paid Time Off., • 401(K) W/Matching., • Flexible Spending Account., • Health Savings Account. NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job Description Great Western Trailer (GWT) is actively hiring skilled and motivated Trailer Technicians to join our growing team at our Houston, TX facility. If you have experience in semi-trailer maintenance and repair and are looking for a company that values your skills and dedication, we encourage you to apply today. Be a part of our team – Apply now! What’s in it for you? • Weekly Paychecks – Get paid on time, every time., • Weekday Schedule – Monday-Friday, 8:00 AM – 4:30 PM (No weekends!)., • Comprehensive Benefits Package – Health, dental, vision, and life insurance., • 401K, Flexible Spending & Health Savings Account options., • Paid Time Off & Sick Leave – Enjoy work-life balance. GWT is looking for dedicated individuals who are: • Quick Learners – Willing to follow instructions, ask questions, and grow their skills., • Team Players – Punctual, reliable, and able to work independently or collaboratively., • Inspect and repair semi-trailers, including brakes, wiring, bodywork, lift gates, and more., • Install and replace add-on components such as toolboxes, winches, and ramp kits., • Perform fabrication and welding as needed., • Reliable transportation to and from work., • Own a personal set of hand tools (except in California)., • Strong mechanical aptitude and experience with semi-trailer equipment and maintenance., • Ability to operate hand tools, power tools, and pneumatic tools safely and efficiently., • Valid driver’s license (a plus, but not required)., • 3+ years of experience in semi-trailer repairs., • Certified brake and FHWA inspector or ability to obtain certification., • Industry certifications such as ASE or welding certification., • Frequent standing, walking, kneeling, and lifting (up to 50 lbs.)., • Work may be performed in a shop, yard, or mobile service environment., • Exposure to mechanical parts, chemicals, fumes, and varying temperatures. Great Western Trailer (GWT) is a fast-growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states—and more expansions coming soon! We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK. Apply Today! If you have the skills and passion for semi-trailer repair, we want to hear from you. Join a company that values your hard work and offers opportunities for career advancement. Apply now and take your career to the next level with Great Western Trailer in Houston, TX! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Job Description About the Role: The New Vehicle Inspection role is critical in ensuring that newly manufactured or delivered vehicles meet all safety, quality, and regulatory standards before they reach customers. This position involves conducting thorough inspections of vehicles to identify any defects, damages, or deviations from manufacturer specifications. The inspector plays a key role in maintaining the brand’s reputation by preventing substandard vehicles from entering the market. This role requires a keen eye for detail, strong technical knowledge of vehicle systems, and the ability to document findings accurately. Ultimately, the goal is to guarantee that every vehicle leaving the facility is safe, reliable, and compliant with all applicable standards. Minimum Qualifications: • High school diploma or equivalent., • Experience in vehicle inspection, automotive maintenance, or a related field., • Certification in automotive inspection or quality control., • Experience working with new vehicle delivery or manufacturing environments., • Proficiency with digital inspection tools and software., • Perform comprehensive inspections of new vehicles, including mechanical, electrical, and cosmetic components, to ensure compliance with quality standards., • Identify and document any defects, damages, or inconsistencies found during the inspection process., • Collaborate with manufacturing and quality assurance teams to communicate inspection results and facilitate corrective actions., • Maintain detailed records of inspections and generate reports to support quality control and regulatory compliance. The required skills enable the inspector to accurately assess vehicle condition by applying technical knowledge and attention to detail during each inspection. Proficiency in reading technical manuals and checklists ensures that inspections are thorough and consistent with manufacturer and regulatory standards. Preferred skills such as certification and familiarity with digital tools enhance the efficiency and accuracy of inspections, allowing for better documentation and reporting. Communication skills are essential for effectively conveying inspection findings and collaborating with manufacturing and quality teams to resolve issues. Together, these skills ensure that the inspector can maintain high-quality standards and contribute to the overall safety and reliability of new vehicles.

Job DescriptionSalary: The QA/QC Inspector (Electrical & Instrumentation) is responsible for ensuring all electrical and instrumentation construction activities meet project specifications, industry codes, and client quality requirements. This role provides oversight of subcontractors, verifies compliance with approved procedures, and supports successful project delivery through disciplined inspection, documentation, and quality assurance practices. The inspector will support construction, precommissioning, commissioning, turnover, and startup phases on oil, gas, and LNG facilities. Key Responsibilities: Quality Assurance & Compliance • Perform inspections, tests, and verifications in accordance with approved Inspection Test Plans (ITPs) and completion of Inspection Test Reports (ITRs), project specifications, and engineering standards., • Issue and manage Monitor, Witness, and Hold Points to ensure adherence to client and vendor requirements., • Provide oversight of subcontractor quality programs, ensuring compliance with engineering specifications, supply specifications, and approved procedures., • Validate installation and testing of electrical and instrumentation systems, including high and lowvoltage equipment, following NEC and applicable industry codes. Construction Quality Control • Conduct field inspections for electrical and instrumentation installations, including cable routing, terminations, grounding, panels, instruments, and control systems., • Identify nonconformances, document findings, and verify corrective actions to prevent rework and maintain construction efficiency., • Track work packages and maintain accurate documentation to minimize double work and ensure traceability., • Support turnover and system completion activities, ensuring all quality records are complete and accurate. PreCommissioning & Commissioning Support • Participate in precommissioning and commissioning activities, verifying readiness of systems for energization and startup., • Review and validate test results, loop checks, functional tests, and equipment reliability checks., • Collaborate with construction, engineering, and commissioning teams to resolve quality issues and support safe, efficient startup. Documentation & Reporting • Maintain organized quality documentation, including inspection reports, test records, NCRs, and turnover packages., • Generate weekly QA progress reports to reflect program effectiveness and highlight key issues or risks., • Support document management activities to ensure accurate and timely recordkeeping. Leadership & Collaboration • Provide guidance and mentorship to project teams regarding quality standards, procedures, and best practices., • Coordinate with engineering, construction management, and subcontractors to ensure alignment on quality expectations., • Promote a culture of operational excellence, safety, and continuous improvement. Qualifications • Thorough experience in Electrical & Instrumentation Quality Control within oil, gas, LNG, or largescale energy projects., • Extensive background supporting EPC/EPCM project execution., • Strong knowledge of electrical systems, high and lowvoltage installations, NEC requirements, and instrumentation reliability., • Proven ability to lead, motivate, and coordinate with multidisciplinary teams., • Strong organizational skills with expertise in documentation, reporting, and quality tracking., • Experience supporting construction, precommissioning, commissioning, turnover, and startup phases., • Must be willing to be assigned to job site locations, on a full time basis, with potential for overtime hours. About Novetus Engineering LLCNovetus is unsurpassed in our commitment to achieving our objectives as efficiently as possible. From a piping modification or pump upgrade project to helping to manage a multi-billion-dollar international development, Novetus will field the right team and the right systems to get the work done quickly and fit for the purpose. Novetus combines engineering workflow automation expertise with an experienced team of engineers and project managers to execute projects with exceptional efficiency. An engineering company focused on the oil, gas, and petrochemical industry, Novetus is based in Houston, Texas and is privately held.

Job Description Title: QA Inspector (Incoming Quality) Location: Houston, TX (Onsite – 5 days/week) Duration: 3-Month Contract (Likely Extension / Possible Conversion) Work Requirements: Must be authorized to work in the U.S. Compensation: 20-25/hr Summary We’re working with a growing medical device manufacturer looking to add a QA Inspector focused on incoming quality control. This role supports inspection of raw materials and precision components before they enter production. This is a detail-heavy, precision-focused role working with small components like PCBs and micro parts. It’s a strong opportunity for someone looking to get into or grow within a regulated, high-quality manufacturing environment. Responsibilities • Perform incoming inspections on raw materials and components prior to production, • Inspect mechanical and electronic components against drawings, specs, and acceptance criteria, • Use measurement tools such as calipers, micrometers, gauges, microscopes, and optical equipment, • Identify defects using visual and precision inspection methods, • Accept or reject materials based on quality standards, • Document inspection results accurately in logs and systems, • Identify and quarantine nonconforming materials, • Support corrective actions and quality investigations, • Maintain inspection records and controlled documentation Qualifications Required: • 1+ year of QA or inspection experience, • Hands-on experience with measurement tools (calipers, micrometers, gauges), • Ability to read drawings, specs, and inspection criteria, • Strong attention to detail and accuracy Preferred: • Experience in medical device or regulated manufacturing (ISO/FDA), • Experience with optical inspection tools (Keyence, Micro-Vu), • Metrology or precision measurement background, • Work Environment, • Quiet, focused inspection environment, • Small team (3–4 inspectors), • High-tenure group (people stay long-term), • Independent work with minimal supervision, • Flexible but structured workflow EEO Statement Summa is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description Who We Are: For over 90 years, Heath Consultants Incorporated has been a trusted name in natural gas safety services. We are a family-owned company with deep roots in protecting people, infrastructure, and communities through precision instrumentation and field expertise. At Heath, quality isn't a department — it's a culture. Every product we build carries that commitment. Job Purpose: We're looking for a detail-oriented and proactive Quality Assurance Inspector to join our team. In this role, you'll serve as a critical guardian of product integrity, performing hands-on inspections, driving compliance with engineering specifications, and surfacing risks before they become problems. You'll work cross-functionally with engineering, production, and supply chain teams, ensuring that everything leaving our facility meets the standard our customers expect. If you're someone who finds satisfaction in precision, thrives on accountability, and believes that quality is everyone's responsibility — this is your role. What You'll Do: • Perform random critical parts inspections to verify compliance with engineering specifications and fit, form, and function requirements, • Conduct regular process and QMS audits: identifying gaps, documenting them clearly, and driving issues to resolution, • Complete final inspections of instruments as required before products reach the customer, • Log and report nonconformances for parts, processes, and finished products to the appropriate stakeholders, • Identify supplier-related risk early, document findings thoroughly, and follow through to corrective action, • Proactively escalate risks that may impact production output, product quality, or delivery timelines, • Recommend improvements in quality procedures, component selection, and manufacturing processes, • Champion quality improvement projects and contribute actively to a culture of continuous improvement, • Bachelor's degree in Engineering, Quality Management, or a related technical discipline (or equivalent hands-on experience), • 3+ years of experience in a quality-related role, with emphasis on auditing, inspection, or quality systems, • Familiarity with electronic assemblies including wiring harnesses and PCBAs, • Ability to interpret schematics and work instructions in the context of fit, form, and function, • Understanding of test and calibration outputs and their relationship to product compliance, • IPC-610 and IPC-620 certification preferred You don't just find problems — you solve them. You notice what others miss, document with precision, and communicate findings without hesitation. Whether you're flagging a supplier risk or presenting audit results to leadership, you bring clarity and follow-through. You're organized, technically sharp, and comfortable working in a fast-paced manufacturing environment. Heath Values: P – Protect people, assets and the public. R – Respect everyone, always. O – Own your job. T – Tell the truth early. E – Execute with discipline. C – Communicate clearly. T – Take pride in quality work. Work Environment & Physical Requirements: Environment Physical Demands • Manufacturing floor setting, • Exposure to vibration, fumes, and airborne particles, • Work near moving mechanical parts, • Occasional exposure to electrical equipment, • Variable noise levels — PPE provided, • Primarily on your feet throughout the shift, • Regular lifting up to 25 lbs; occasional up to 50 lbs, • Frequent use of hands for precision tasks, • Close vision, depth perception, and focus adjustment required Ready to bring your quality expertise to a team that takes craftsmanship seriously? Apply today and help us build products that perform in the field — every time. #LI-EG1 #INDEG

Job Description Weld Inspector, Aerospace Level III Houston, TX About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With multiple NASA lunar missions in development and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers, and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. About the Position: Intuitive Machines is seeking a Level III Welding Inspector to join our team. The Aerospace Level III X-Ray Welding Inspector is responsible for overseeing and performing advanced nondestructive testing (NDT) on welded aerospace components using radiographic (X-ray) inspection methods. This role ensures compliance with customer, regulatory, and industry standards while supporting production, engineering, and quality operations. The Level III Inspector provides technical guidance, certifies personnel, develops procedures, and ensures that all radiographic inspections are performed accurately, safely, and consistently. A candidate for this position will be encouraged to take on as much responsibility as practical and will be expected to play a role in the manufacturing and implementation of parts that will support or be part of the Lunar program. This includes but is not limited to the Lunar Lander, Satellites, Payloads support, Test and Verification and others. Responsibilities: • Perform and interpret radiographic (X-ray) inspections on welded aerospace componentsin accordance withNAS 410, ASNT SNT-TC-1A, or equivalent standards., • Serve as Level III authority for radiographic testing (RT), including oversight of Level I and II NDT personnel., • Develop, authorize, andmaintainNDT procedures, work instructions, and inspection techniques., • Review weld quality, evaluate discontinuities, anddetermineproduct acceptance based on engineering drawings, specifications, and applicable codes., • Lead and manage certification, training, and technical evaluations for NDT personnel., • Ensure all inspection activitiescomply withradiation safety protocols andmaintainrequired documentation., • Collaborate with engineering and production teams to resolve weld and material quality issues., • Support MRB activities, root-cause investigations, and corrective action planning., • Maintainall NDT records, including film, digital archives, technique sheets, and calibration data., • Interface with customers, auditors, and regulatory bodies during assessments or program reviews., • Current NDT Level III certification in Radiography (RT)in accordance withNAS 410, ASNT SNT-TC-1A, or equivalent., • 5+ years of experience performing radiographic inspection in aerospace manufacturing or repair environments., • Demonstratedexpertisein weld evaluation, defect characterization, and radiographic interpretation., • Strong understanding of aerospace materials, welding processes, and associated discontinuities., • Ability to read and interpret engineering drawings, specifications, and GD&T., • Knowledge of radiation safety regulations and safe operating procedures., • Additional NDT certifications (VT, PT, MT, UT)., • Experience with digital radiography (DR/CR) systems., • Knowledge of AWS D17.1, ASME standards, and aerospace welding requirements., • Experience with NADCAP audits and compliance. Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job DescriptionCompany Description At QIMA, we’re on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever products are made. We help businesses secure every step of their supply chain with quality inspections, supplier audits, certifications, and lab testing, all powered by our intelligent digital platform. Our team of 5,000 QIMers (and counting) across 40 offices and laboratories, are united in our shared passion for innovation and integrity, and guided by our QIMA values in the decisions we make every day. We believe in the work we do, and in making a positive difference in the world. Does this sound like something you’d like to be a part of? Our Consumer Goods Division is dedicated to helping brands, retailers and manufacturers worldwide deliver safe, quality and ethically made products to their consumers. Every day at work, our inspectors, auditors, and lab techs use their expertise to help safeguard the products you use every day in your home: from clothes and footwear to toys and baby products, to electronics, appliances, and furniture. Job Description As a Quality Control Inspector, you'll be reporting to an Operations Manager and working as a part of our Operations team. At QIMA, the role of Operations is to deliver our industry-leading services to our clients while ensuring that all the work is performed to the QIMA standard of quality. Your role in this will be to: • Check email daily in order to receive inspection documents and guidelines;, • Attend inspections on time and communicate with supplier in a professional way;, • Perform the inspection of the merchandise according with company procedures. Supervise the stuffing of the containers according with company procedures;, • Fulfill inspection reports according with company procedures and time lines.Qualifications Think you have what it takes? First of all, we want someone with: • Experience in quality management, especially hardlines / furniture / electronics (2 years or more);, • Knowledge of AQL standards, as well as relevant safety and quality regulations;, • Good command of English (spoken and written);, • Great attention to detail and strong professional ethics. Additional Information Does this describe you? Then we want to hear from you as soon as possible! Apply now with your CV in English and we can write the next chapter of the QIMA story together.

Job Description The QC Inspector position is responsible for inspections against the internal quality system (QMS), customer requirements, and industry standards. The QC Inspector is also responsible for inspecting raw material, inspecting finished product, internal process audits, and ensuring general customer satisfaction. Responsibility Including but not limited to: • Use of precision tooling and measuring devices such as calipers, micrometers, coating thickness gauge, rulers, tape measures, stamping dies, extensometers, and many more., • Writing and filling out QC reports and digital data entry., • Use of MS office and internal digital programs., • Perform FAI reports and communicate efficiently on the results of FAI., • Read and interpret engineered drawings., • Use GD&T to perform product evaluations., • Inspect to engineered drawings and determine if a product is within tolerance., • Issue NCR’s against any raw material, process, or finished good product that’s not within the required specifications., • Will need to read and understand industry standards such as ASTM, ANSI, API, and ISO., • Ensure the achievement of quality objectives of the department., • Ensure 5S activities and their guidelines are adhered to., • Effectively communicate with peers, management, and customers., • Must have at least a High School Diploma., • Must be willing to work in a fast-paced environment., • Can work in a team and is a team player., • 1-3 years of experience is required, • Use of precision measuring devices., • Willingness to learn., • Is flexible and can work overtime., • Experience with ISO 9001., • Can read engineered drawings., • Proficient with MS Office., • Can read, understand, and interpret industry standards., • Can write SOP’s, JHA’s, and procedures.

Job Description Night Shift The QC Inspector will work closely with departmental managers, production staff, and suppliers you will take responsibility to ensure quality, aiming to minimize the costs of reworking or waste and maximize customer satisfaction with products. DUTIES: · Monitor and report Quality Assurance and Quality Control aspects of required work scope package(s). · Control and ensure the accuracy of all project documentation · Control and ensure the accuracy of all required component parts · Completion of various inspection and quality reports · Mechanical and inspection report completion to the required standard. · Ensure the traceability of all parts required and documentation trail are in place. · Record and document traceable information which will be required to certify the manufacturing process, to the highest standards. · Identify engineering faults and process inputs throughout key stages of a project’s development. From order acknowledgement to final inspection · Recommend adjustments to the process What we look for: · EDUCATION: MINIMUM HIGH SCHOOL DIPLOMA OR GED · CNC machine background (must) · Experience in reading and interpreting engineering drawings · Use of measuring tools for critical dimensions Company DescriptionAbout us: Express works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career. Express Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job. In compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discriminaAbout us:\r\n\r\nExpress works with job seekers to help find the right job for their skills and experience. We have a variety of jobs available, including full-time, part-time, and temporary positions. As one of the leading staffing companies in Houston, we’re ready to help you take the next step in your career.\r\n\r\nExpress Employment Professionals is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. We are committed to the principle of equal employment opportunity for all people and to hire and promote individuals solely based on their qualifications for the job.\r\n\r\nIn compliance with applicable federal, Texas and local law, employment decisions are based on business needs, job requirements, and an individual’s qualifications regardless of race, color, religious creed, national origin, ancestry, age, gender, pregnancy, sexual orientation, gender identity, marital status, familial status, disability, genetic information or protected veteran status. We do not tolerate discrimina

Job DescriptionQuality Control Inspector | $16-$19 an hour | Monday through Friday 7:00am to 5:00pm What Matters Most • Competitive Pay rate $16-$19 an hour, • Schedule: Monday through Friday 7:00am to 5:00pm, • Location: South Houston, TX, • Temporary-to-hire opportunity with career growth and stability, • Weekly Pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus programJob DescriptionWe are currently seeking a motivated Quality Control Inspector to join our dynamic team. In this role, you will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency. If you are looking for a hands-on position where you can contribute to the efficiency of our operations and grow within a supportive work environment, we encourage you to apply. Responsibilities:, • Daily use and care of measuring equipment consisting of calipers, micrometers, tap measure, height gage and NPT threaded gages, • Daily inspection on inbound and outbound material, • Perform thorough examinations of all materials and finished products, • Implement and improve quality control operating procedures, • Participate in routine visual inspections Qualifications and Requirements:, • Ability to work flexible hours, including weekends (50+ hours/week)., • Pass background check and drug screen., • Commitment to safety and adherence to protocols., • At least 6 months experience inspecting pipe, • Experience with fittings flanges pipe preferred, • Must be able to do simple math, • Capable of working in extreme weather and performing physical tasks. Benefits and Perks:, • Competitive Salary: $16-$19 an hour - Enjoy a competitive wage that reflects your skills and experience with potential for performance-based bonuses, • Comprehensive health, dental, and vision insurance., • Generous paid time off (PTO) and paid holidays., • 401(k) retirement plan with company match., • Opportunities for career advancement and professional development., • Supportive and inclusive work environment., • Employee wellness programs and resources., • Discounts on company products and services. Your New Organization:Join a dynamic and growing leader in the pipe supply industry where your skills and contributions are highly valued. Company offers a competitive salary, comprehensive benefits, and ample opportunities for career advancement in a supportive work environment. Their commitment to employee development and a positive workplace culture makes this a great place to build your career. Discover your future with a company dedicated to excellence and growth.Your Career Partner:The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment.The base hourly range for this position is $16 - $19 an hour, excluding benefits, bonuses, or other compensation. Your final salary will depend on your skills, qualifications, experience, location, and internal pay equity. Please note, hiring at the top of the range is uncommon to allow room for future salary growth.

Job Description We currently have an immediate opening for technicians with import experience. We are looking for a motivated, hard-working person to help with the day-to-day operations at our dealership. Job Responsibilities • Determine and discuss vehicle issues, current work, and future needs with customers and service advisors., • Diagnose, maintain and repair automotive systems., • Perform quality inspections, including test drives, of vehicles before returning them to customers, • Maintain all Honda training standards, • Communicate directly with service advisors to keep customers informed of any additional service needs and provide an estimate for any new repairs., • Execute repairs under warranty to manufacturer specifications. Fill out paperwork appropriately as per Honda standards, • All paperwork must be filled out correctly according to the dealer and Manufacturer's policy and procedure, • Test drive vehicle at both dealer and state speed limits to avoid accidents and street violations, • Keep your stall neat, clean, and orderly Requirements, Education and/or Experience Master Technicians must have Master Technician certification available with all completed training certificates according to that specific Manufacturer. Honda Master Technicians - must have completed all 249 online self-studies as well as 79 in-person classroom modules. In addition, Master Techs are required to continue their education and training by completing additional modules every time Honda releases a new model or technology feature. State Inspector license is a plus. Total-experience preferred as a Master Technician, or Line Technician is 3-5 years. Import experience preferred but open to Domestic driveability/suspension experience. Provide your own tools to perform vehicle repairs. Dealer has all special tools required by American Honda for recalls, service bulletins that technician are not required to purchase. Must pay attention to detail Must be eligible to work in the U.S. and pass pre-employment screening to include M.V.R., drug screen, and criminal background check Certificates, Licenses, Registrations (Including Driver's License) Operator's Driver's License (must be insurable), good driving record a must! Physical Demands The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms, and climb or balance. The employee frequently is required to stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. This job's specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Benefits: Pay ranges $17.00 - $28.00 per flat rate hour with a $1.00 additional efficiency bonus at 50+ flag hours. This pay will be decided according to your actual years of experience working for a dealership and what training level has has been acheived. The dealer pays for any fees associated with required manufacturer training Uniforms provided by dealer Medical/Dental/Vision/Life insurance 401(k) with company match Employee discounts Paid vacation after one year, up to 10 days vacation after two years Holiday Pay - up to 5 days each year Drug-Free work environment E.O.E Great team to work with - Our shop structure includes a full time shop foreman for assisting, training and managing the shop. You will be provided with one flat bay and one bay with an in-ground hydraulic lift Company Overview Since 1938, The Gillman Companies have been a family-owned and operated group of automobile dealerships. With over 80 years of success, the Houston-based automotive group has ten dealerships across Houston, Rosenberg, San Benito, Harlingen, and San Antonio, representing Honda, Nissan, Chevrolet, GMC, Chrysler, Dodge, Jeep, and Subaru. The company was founded by Frank Gillman when the first dealership opened on Milam Street in downtown Houston. Frank knew the importance of customer loyalty. He also understood that loyalty had to be earned. Over 80 years later, the location and scope of the business have changed, but the constant emphasis on customer satisfaction remains the same. Now run by Frank's Granddaughter Stacey Gillman, under her leadership, the Gillman Companies have grown to become one of the largest retail automotive groups in America. And today, the third Gillman generation is active in the business. Success has not altered the organization's founding principle. Every employee in every Gillman dealership knows customer satisfaction is paramount. And, they understand continued prosperity and future growth depend upon maintaining this long-established tradition of excellence.

Staffmark is currently seeking a Quality Control Inspector in Houston, TX, to join a dynamic and collaborative team. We invite you to apply today! 1st Shift Hours: Monday-Friday, 8 am-5 pm, weekends as needed Pay: $16-$18 per hour (Depending on experience) Essential Functions: • Utilize and maintain measuring equipment such as calipers, micrometers, tape measures, height gages, and NPT threaded gages daily., • Conduct daily inspections of inbound and outbound materials., • Perform thorough examinations of all materials and finished products., • Implement and enhance quality control operating procedures., • Participate in routine visual inspections., • Maintain a clean and safe work environment. Requirements: 2+ years of related experience involving pipe threading and the ability to stand for extended periods and lift 50 pounds. Ready to embark on this exciting opportunity? Click 'Apply Now' to submit your application, and a dedicated recruiter will connect with you soon! At Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact. Staffmark is an equal opportunity employer. Allapplicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other legally protected status. Staffmark offers reasonable accommodations for qualified individuals with disabilities; contact your local branch for inquiries. Staffmark is an E-Verify employer. See our Privacy Notice for Candidates and Employees/Contractors at . By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. Frequency varies and message/data rates may apply. Reply STOP to cancel or HELP for help.

HPC-Industrial Powered by Clean Harbors is currently seeking a QA/QC Inspector to join their safety conscious team in La Porte, TX. As a QA/QC Inspector, will be responsible for inspecting incoming materials along with in-process inspections. Why work for HPC-Industrial? • Health and Safety is our #1 priority and we live it 3-6-5!, • Competitive wages, • Comprehensive health benefits coverage after 30 days of full-time employment, • Group 401K with company matching component, • Opportunities for growth and development for all the stages of your career, • Generous paid time off, company paid training and tuition reimbursement, • Inspection of incoming materials, • In process inspections, • Inspection of finished goods What does it take to work for HPC-Industrial? • Working knowledge of ISO standard 9001, • Understanding of manufacturing and fabricating processes, • Knowledge of welding processes and procedures, • NDT Level II Certification (PT), • NDT Level II Certification (VT), • 2+ years of experience in inspection, • Ability to read tape measure, calipers, mics and other inspection instruments, • Ability to read and understand engineered drawings, • Ability to read CMTRs, • Ability to work effectively in cross functional teams, • Strong written and verbal communication skills, • Strong organizational skills HPC-Industrial, a Clean Harbors company, is the premier industrial cleaning and environmental services company in North America supporting the upstream, downstream, and utility sectors. HPC-Industrial offers an exceptional three-pronged safety system, innovative career development platform, committed customer service, deep industry expertise, and advanced technology and automation. We are committed to safety, people, growth, service, and performance. We provide the safest, most efficient operational experience for our customers and the most comprehensive training and career development for our employees. HPC-Industrial is an equal opportunity employer. HPC-Industrial is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-844-922-5547. HPC-Industrial is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *HPC

Job Description Job Description: Field Engineer will be responsible for construction engineering, contract administration, management of inspection staff, management of testing contract and quality control of multiple transportation infrastructure construction projects in accordance with the contract documents. Coordination with the private utilities, HOA's, businesses, property owners, and Fort Bend Staff/Agents will be required throughout the projects. Responsibilities: • Apply diversified knowledge of construction engineering principles and practices and provide recommendations to resolve significant construction engineering problems, • Provide general inspection of construction work to ensure compliance with contract documents, plans, specifications and standards., • Review inspector daily reports in accordance with the project requirements., • Monitor quality control and quality assurance material field testing for concrete, steel, asphalt and soils as applicable., • Perform and/or supervise staff in preparing pay estimates, schedule reviews, RFi responses, submittal reviews, non-conformance reports, etc., • Review contractor requests for additional compensation and time arising from plan revisions, extra work, changes conditions, claims etc., • Draft change orders and other correspondence, • Ensure all project documentation in performed and archived in accordance with owner requirements, • Coordinate the work of sub-consultants., • Lead or attend meetings that facilitate open communication and problem resolution between contractor, client and stakeholders., • Lead project close-out process including final inspections, prepare punch lists, and warranty 1-year inspections., • Assist and contribute to contract procurement activities., • Bachelors degree in a relevant field (Civil Engineering, Construction Management, Construction Engineering, Structural Engineering, etc.), • A minimum of 4 years of progressively responsible experience relevant to this role in transportation infrastructure construction., • Working knowledge of applicable standards, specifications and materials Experience working with Fort Bend, Harris County, TxDOT, HCTRA, City of Houston or similar municipal transportation construction projects. Company DescriptionWe are a Houston-based engineering consulting company established on the cornerstone of transportation. We offer a multidisciplinary blend of planning, engineering and program management services for all types of transportation projects.We are a Houston-based engineering consulting company established on the cornerstone of transportation. We offer a multidisciplinary blend of planning, engineering and program management services for all types of transportation projects.

Job Description STAR PIPE PRODUCTS Location: 4018 Westhollow Parkway, Houston, TX 77082 Pay: $18-22/HR (Depending on experience) 2nd Shift: 3 pm - 12 am (Will train from 8 am - 5 pm for the first couple of months) Summary The QC Inspector assists the Quality Control department with several functions including following the sampling and inspection procedure, inspecting items for quality, completing inspection reports, communicating non-conformance to the QC Supervisor, sorting materials, and other quality control duties. Essential Functions • Completes quality control reports and tests using calipers, tools, and gauges, • Sorts and moves quality control materials for testing and storage Duties and Responsibilities • Incoming Containers and QC Inspection, • Select items for inspection from the daily inspection log, • Visual and dimensional inspection of products during Incoming or In-process items, • Read blueprints on all the inspection reports for planned items from the computer, • Select sampling plan as per the prescribed guidelines for batch quantity Accept or Rejects, • Collect all the required instruments for inspection from the QC Lab, • Manually opens crates and pallets containing inspection items using proper instruments at the Receiving Dock, • Removes fittings from crate/pallet as per sampling plan, if necessary, using the forklift, • Inspects for visual, dimensional, other physical properties, and assembly as per the inspection procedure, • Fills out inspection results and test results into ERP Software, • Reports any non-conformance found during the inspection to the QC supervisor for re-verification and identifies the product by attaching a Red QC tag, • Attaches a Green tag per procedure to all inspected items which confirms the requirements, • Carries out any special QC tests per QC supervisor instructions of the material whenever required per procedure, • Reviews receiving inspection paperwork as it is completed. Check that the report complies with the inspection procedure completely, • Updates the QC inspection log in the computer for the number of items checked and comments if the item checked is found to conform to standards or not. Report any type of feedback found during the inspection to the QC Supervisor, • Updates all inspection reports and attaches them with the put-away receiving documents for QC supervisor review and approval, • Moves rejected material to the QC holds area as per guidelines from QC Supervisor, • Ensures that nothing is left on the dock pending for QC inspection at the end of the day. In case of problems, reviews them with the QC Supervisor Local PO’s / RMA’s / Return Shipments Inspection • Inspects all Local PO’s, RMA’s and customer returns per standard QC guidelines and procedures, • Reports any non-conformance in the items to the QC Supervisor for his review and approval, • Updates the paperwork with the accepted, rejected, or rework comment and provides the paperwork to QC Supervisor for his review and approval, • Accurately prepares all required pictures and papers as per guidelines given by the Supervisor General Responsibilities as QC Inspector • Follows all safety measures, • Ensures proper use and maintenance of all equipment and instruments/gages, • Maintains good housekeeping, • Ensures all procedures, including ISO, SPP-QAP-1503, and SPP-GAM-1001, are followed, • Completes special assignments when assigned from time to time, • Completes in-process QC inspection in Rework department per standard QC procedure, • Ensures proper storage of rejected material in the QC hold area and that no material is moved to QC hold from elsewhere without proper identification, • Completes other duties as assigned Education/Experience Required: • Minimum high school diploma or equivalent, • Good Communication skills, • 1 year plus quality inspection experience in the metal industry or equivalent Preferred: • Associates degree or Certificate course in Engineering, Quality Control, or related field, • Familiarity with castings & steel products, • Strong understanding of inspection gauges & tools and documentation to support quality inspection efforts Knowledge, Skills, Licenses, Certifications, Etc.: Required: • Requires good reading, writing, and verbal English communication skills, • Basic Math skills, • Basic knowledge of QC systems and requirements, • Maintains a Material Handling Forklift license, • Able to work well independently Preferred: • Experience in warehouse operation and inspection in the metal industry is a plus, • Experience working with Quality Control, • Coordination with another department required, • Familiar with Calipers, Micrometers, and dimensional gauges, • Basic computer skills including Microsoft Excel and Word Physical Demands • Able to use a variety of hand-held calipers and various QC gauges up to 60”, • Able to lift, push, and/or pull 50 lb. parts, • Exposed to warehouse environment, • Able to stand for long periods, • Able to kneel or squat as required Work Environment • Warehouse and lab environment., • Some outside work will be required. Star Pipe Products is an Equal Opportunity Employer Company DescriptionWe are the proud owner of a U.S.A. foundry situated in South Coffeyville, Oklahoma. Star® Pipe Products is a domestic & global manufacturer for a broad array of iron products for the water and wastewater industries. Established in 1981, Star® Pipe Products is headquartered in Houston, Texas, and has been delivering quality products and services for over 40 years.We are the proud owner of a U.S.A. foundry situated in South Coffeyville, Oklahoma. Star® Pipe Products is a domestic & global manufacturer for a broad array of iron products for the water and wastewater industries. Established in 1981, Star® Pipe Products is headquartered in Houston, Texas, and has been delivering quality products and services for over 40 years.

Job Description Job Location: 31 Mohegan Ave Pkwy, New London, Connecticut Duration: June 2026 to October 2028 (approx) Housing Allowance: $2688/month About the role: Seeking an on-site Construction Inspector for a steam distribution system overhaul at the U.S. Coast Guard, New London, CT. The inspector will conduct daily site surveillance, document progress, review contractor submittals, and keep the Government's COR informed of compliance issues. Responsibilities: • Conduct daily construction inspections to ensure compliance with project specifications, safety standards, and quality requirements, • Document site progress through reports, photographs, and submittal reviews, • Report compliance issues to the Government COR and project team, • Coordinate with contractors and project stakeholders to support project execution, • Use tools such as Procore and Microsoft Project for tracking and communication, • Maintain inspection and quality assurance records, • Ensure work complies with federal construction regulations and contract requirements Required Qualifications: • Minimum 2 years on federal government construction experience within the last 10 years, • Minimum 2 years in steam distribution systems, civil/site work, or mechanical/utilities installation, • Demonstrated knowledge across multiple construction trades (structural, mechanical, plumbing, electrical, civil, etc.) and underground utilities, • At least 1 relevant project example involving steam systems, civil/site work, or utilities/mechanical room work Preferred qualifications: • QA/QC certifications

Job Description Information Providers, Inc. (IPI) is seeking self-motivated Independent Contractors to join our network of Insurance Inspectors. If you enjoy working outdoors, managing your own schedule, and have an eye for detail, this is the perfect opportunity to grow your own inspection business with the support of an industry leader. What You’ll Do As a field inspector, you will conduct underwriting surveys to help insurance companies assess property risks. Your primary tasks include: • Property Assessments: Evaluating the condition of residential and commercial structures., • Data Collection: Measuring dimensions and identifying building materials and potential hazards., • Documentation: Capturing high-quality photos of the property., • Ultimate Flexibility: You are the boss of your own schedule. Dictate your own routes and work hours to fit your lifestyle., • High Volume Potential: We have a consistent flow of inspections available to keep you busy., • Competitive Fee-Based Pay: Earn more as you go. Compensation is paid per inspection, with fees varying based on the report type., • Reliable Transportation: A dependable vehicle for daily field travel., • Tech Essentials: A Windows-based computer with high-speed internet and a smartphone for photography., • Field Tools: A measuring wheel (standard for the industry)., • The Right Mindset: You should be a self-starter who is comfortable working outdoors in all seasonal conditions., • Ladder: Some of our inspections require a roof inspection. A 16' ladder is required for roof inspections Take the next step in your independent career today. Apply @ Our IC’s are paid on a fee based inspection. The type of inspection dictates the fee given for each report. Company DescriptionHeadquartered in Hopkins, MN, Information Providers, Inc. (IPI) began business back in 1996, when the owner [and CEO] founded the company on the notion that customers prefer to do business with a focused and dedicated service provider. Since 1996, our company has grown to 500 employees and we currently operate in 32 states. We are a leading provider of Property & Casualty and Premium Audit information services.Headquartered in Hopkins, MN, Information Providers, Inc. (IPI) began business back in 1996, when the owner [and CEO] founded the company on the notion that customers prefer to do business with a focused and dedicated service provider. Since 1996, our company has grown to 500 employees and we currently operate in 32 states. We are a leading provider of Property & Casualty and Premium Audit information services.

Job Description The Sr. Technical Engineer plays a critical role in leading and managing the technical aspects of industrial service projects involving refractory installations, including potential responsibilities related to acid proof masonry and corrosion protection applications. The role requires expertise in materials science, heat transfer, stress analysis and industrial construction methods as well as a practical understanding of the harsh, corrosive and high temperature environments found in, but not limited to, petrochemical, refining, incineration, power generation, chemical, gas, liquids, minerals processing, coke calcining, steel and non-ferrous manufacturing industries. Role and Responsibilities • Perform and lead the specification and technical oversight of refractory lining design, including potential opportunities to do same with acid proof masonry and corrosion protection systems., • This position is responsible for developing engineered solutions (including design), overseeing technical execution, familiarity with industry and customer standards and providing mentorship to junior engineers and field teams., • Collaborate with project managers, estimators, and clients to develop technical scopes of work, project plans, and material selections., • Analyze engineering drawings, specifications, and customer requirements to ensure technical solutions align with project objectives and safety standards., • Provide technical support and troubleshooting guidance during project execution, both remotely and on-site., • Conduct inspections, quality checks, and failure analyses for ongoing and completed projects., • Support procurement in evaluating material specifications, vendors, and subcontractor capabilities., • Stay up to date with applicable codes, standards (e.g., ASTM, API, NACE, OSHA), and best practices in industrial applications., • Participate in root cause analysis and provide recommendations for design or process improvements., • Prepare and present technical documentation, reports, and client-facing communications., • Mentor and train junior engineers and technicians in technical procedures and safety practices., • Bachelor’s degree in Mechanical Engineering or a related field. Master’s degree preferred., • Minimum 7–10 years of experience in an industrial services environment, with direct experience in refractory, corrosion, rubber lining, or scaffolding systems., • Professional Engineer License is a plus, • Strong understanding of materials used in high-temperature, chemical, and abrasive environments., • Proficiency in engineering software (e.g., AutoCAD or equivalent)., • Familiarity with scaffolding load calculations and design requirements., • Working knowledge of QA/QC procedures, inspection techniques, and documentation practices., • Excellent communication skills with the ability to interface effectively with cross-functional teams and clients., • Willingness to travel, as needed (domestic and/or international)., • Field Mobility: Ability to move around construction and industrial job sites, including climbing ladders, scaffolding, and accessing confined spaces, elevated platforms, and uneven surfaces., • Manual Dexterity: Capable of using hand tools and testing equipment, and handling materials or samples during inspections and assessments., • Physical Stamina: Able to stand, walk, or remain on foot for extended periods during field inspections or supervision, often in hot, dusty, or chemically exposed environments., • Lifting Requirements: Must be able to lift and carry equipment or materials up to 50 pounds occasionally., • Environmental Tolerance: Ability to work in extreme conditions including high heat (near kilns or furnaces), humidity, noise, dust, fumes, and chemicals while wearing appropriate PPE., • Vision and Hearing: Visual acuity (with or without correction) sufficient to read technical drawings, operate computers and field equipment, and perform visual inspections. Adequate hearing (with or without aids) to detect alarms, communicate in noisy environments, and participate in safety briefings., • PPE Usage: Must be capable of wearing and working in full personal protective equipment (PPE), including hard hats, safety glasses, gloves, flame-resistant clothing, steel-toed boots, respirators, and fall protection harnesses when required., • Travel and Field Work: Willingness and ability to travel to remote job sites, sometimes on short notice, and work extended hours or shifts based on project demands. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at Thorpe Specialty Services Corporation is on an “at-will” basis. There is no contract of employment between Thorpe Specialty Services Corporation and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services Corporation and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionThis position is responsible for supervising quality direct labor as well as assist with process improvement and special projects as needed. Duties and Responsibilities: • Responsible for supervising, scheduling, and developing talent of quality direct labor, OBA (out of box auditor), VI (visual inspector), and IPQC (in process quality control) inspectors., • Prepare and summarize daily quality reports and submit to Quality Engineers and management for corrective actions., • Report any 6S or safety violations to appropriate groups for corrective actions and identify opportunities for safety improvement., • Assist with operator training and work with Human Resources to ensure all proper paperwork is created and documented., • Organize and supervise IPQC team to create production line/station checklist for daily audit., • Participate in continuous process improvement efforts set by management., • Assist the Quality Engineers in purge and CPAT screen process to ensure all non-conforming material is identified, segregated, and disposed of correctly., • Assist and back up IPQC Auditors., • Provide input and participate in problem solving techniques with Quality Engineers., • Train IPQC in understanding 7QC tools for identifying process escapes., • Prior lead/supervisory experience in a quality or production department preferred, • Working knowledge of Quality improvement processes and systems required, • Excellent communication (written and verbal) skills, • Proficiency with Microsoft Office applications required, • Must be able to manage multiple projects/requirements in a fast-paced environment, • Must be able to exercise independent judgment and problem solving skills, • Strong organizational skills, attention to detail, and sense of urgency, • Bachelor’s degree in Industrial Engineering, or equivalent experience, • Minimum 3 years of related experience required, • Manufacturing experience required Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR aRgP9A9Bau

Job DescriptionWe're hiring a Quality Control / Receiving for our Houston, TX client! We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: • Job Title: Quality Control / Receiving, • Location: Northwest Houston, • Pay: $20, • Hours: Monday-Friday, 8 AM - 5 PM], • Duration: Temp to Hire, • Description of Duties:, • Review and perform test data and present data such as hardness, System 22, or visual for clients, liquid penetrant. and test Review data for compliance with specifications and report abnormalities. Maintain and complete documentation., • Read technical drawings and interpret technical info. ISO Expereince is a plus.alibrate equipment. Receive and track materials and log invoices sent and received. Keep records of invoices sent and received. Track the movement of merchandise in the warehouse., • Requirements:, • hardness testing, including System 22. Proficiency in reading technical drawings and understanding of technical information. Must have hand and finger dexterity. Must be able to lift 50lbs.

Job Description Job Title: Structural Field Inspector – Asset Management Location: Dallas, TX and Houston, TX FLSA Classification Non-exempt Job Description: Orbital is seeking a Structural Field Inspector to support the execution of Asset Integrity and Asset Management programs at client facilities in rural areas between Dallas, TX and Houston, TX. This role is responsible for performing field inspections of existing structural assets, documenting observed conditions, and collecting accurate, defensible data that supports risk‑based decision making. The Structural Field Inspector works closely with the Field Project Manager and Asset Management Program Manager to ensure inspections are performed safely, consistently, and in accordance with established standards, procedures, and client requirements. This position is field‑focused and requires regular travel to industrial facilities. The Structural Field Inspector reports to the Field Project Manager / Asset Management Program Manager. Essential Functions Field Inspection & Data Collection * • Perform field inspections of existing industrial structures, including structural steel, reinforced concrete, foundations, platforms, walking‑working surfaces, conveyors, bins, silos, stacks, and similar assets, • Execute inspections in accordance with Orbital inspection procedures, industry standards, and client‑specific requirements, • Identify, photograph, and accurately document observable structural deficiencies, damage, deterioration, and safety concerns, • Comply with all Orbital, client, OSHA, MSHA, and site‑specific safety requirements, • Review and follow client safety procedures and complete all required safety documentation prior to and during field work, • Collect high‑quality field notes, photographs, measurements, and supporting documentation, • Assist with the preparation of inspection reports and deliverables by providing clear, complete, and well‑organized field data, • Coordinate daily field activities with the Field Project Manager, inspectors, and client site contacts, • Maintain professional working relationships with client operations, maintenance, and engineering personnel Please note that this job posting does not list all duties and responsibilities that are required of this job. Duties and responsibilities may change at any time with or without notice. Qualifications: • Associate or Bachelor’s degree in Engineering, Engineering Technology, Construction Management, or a related technical discipline, or equivalent combination of education and hands‑on inspection experience, • Minimum of 3–7 years of experience performing structural or asset integrity inspections in industrial environments, • TWIC card holder preferred, • Prior experience supporting Asset Management, Asset Integrity, Mechanical Integrity (MI), or Risk‑Based Inspection (RBI) programs is preferred, • Familiarity with digital inspection tools, mobile data collection, or asset tracking systems is preferred, • Experience working in a consulting engineering or inspection services environment preferred, • Experience working at asset‑intensive facilities such as power generation, oil & gas, refining, chemical processing, manufacturing, steel, mining, or materials processing sites, • Strong understanding of structural components and common deterioration mechanisms, • Ability to accurately document field observations using written notes and photographs This is an on-site or hybrid position. Compensation is based on market data and internal equity and may vary depending on the candidate’s location. Salary Range: $39,000-89,000 annually (based on experience, qualifications, and location) Benefits: A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and a comprehensive benefits package designed to support your health, financial security, and work-life balance. Our benefits include medical, dental, vision, and prescription drug coverage; a 401(k)-retirement savings plan; and supplemental insurance options. We also provide company-paid life and AD&D insurance, company-paid short-term disability coverage, and a generous paid time off program to ensure you have the support and flexibility you need both professionally and personally. About Orbital: Powered by People, Driven by Solutions Since 1969, Orbital has been specializing in project development, project execution and asset management for the heavy industrial sectors and utilities. Our regional offices, hands-on mentality, and world-wide integrated teams provide an ability to leverage subject matter experts and industry best-practices wherever a project may lie geographically. Our focus steadfastly remains on finding and delivering the best solution, regardless of where that team sits across our organization. At Orbital, our power is our people. Equal Opportunity Statement: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionFor more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Inspector position in Bastrop, TX on a 6-month contract. The schedule is for the 2nd shift (2:30 PM-11 PM), full-time. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you!Key Responsibilities • Review and validate e-Cert packages for components, subassemblies, and final assemblies, • Verify inspection records, test results, certifications, signatures, and approval workflows, • Identify, document, and communicate discrepancies or nonconformances to Quality and Engineering, • Ensure compliance with drawings, specifications, QMS requirements, and build plans, including traceability, • Perform visual, dimensional, and physical inspections (incoming, in-process, final, and first article), • Conduct surface plate inspections and lot sampling as required, • Use precision tools such as micrometers, calipers, height gauges, dial indicators, and profilometers, • Inspect workmanship issues (burrs, scratches, fasteners, edge distance, damage), • Verify corrective actions and rework completion, • Review shipping documentation and confirm proper packaging and preservation, • Provide summary reports, weekly status updates, and support continuous improvement effortsRequired Qualifications, • 3+ years of experience inspecting precision mechanical parts, • Strong ability to read and interpret engineering drawings and GD&T, • Proficient with hand inspection tools (tolerances ≥ .005”), • Comfortable working with digital systems and new software, • Excellent attention to detail and visual inspection skills, • Must pass a background check, • Must be able to work 2nd shift: 2:30 pm-11 pm, • ITAR compliance requiredPreferred Qualifications, • Associate's degree or higher in a related field, or equivalent experience.

Job DescriptionAt 5K Power, we excel in delivering sophisticated electrical solutions for a variety of sectors, including critical infrastructure, education, sustainable energy, transportation, and high-rise construction. Our commitment to quality, trust, and reliability forms the cornerstone of our long-standing partnerships and diverse project portfolio. The 5K Power team continuously strives to deliver exceptional results by bringing passion, collaboration, and pride to every project. Infused with a sense of shared ownership, our entire team focuses on building strong relationships with our clients based on integrity, trust, and reliability, ensuring that we consistently deliver outstanding results. Job Summary: We are seeking a versatile and detail-oriented Quality Control Inspector to ensure that all products meet established requirements for reliability, workmanship, and overall quality standards. The ideal candidate will perform inspections, testing, and documentation throughout the production process while supporting continuous improvement and compliance initiatives. Job Duties: • Perform in-process inspections of fabricated steel components, weldments, enclosures, frames, and modular structures to verify dimensional accuracy, alignment, fitment, and workmanship., • Inspect cutting, bending, welding, and structural fabrication processes in accordance with engineering drawings, fabrication standards, and project specifications., • Verify proper installation of hardware, fasteners, mechanical supports, doors, hinges, bus bars, and enclosure assemblies., • Perform in-process inspections of wiring, terminations, harness routing, labeling, torque requirements, and component installation., • Verify assemblies such as switchboards, panelboards, power racks, control panels, and relay protection panels meet electrical schematics, wiring diagrams, and bill of material requirements., • Conduct functional checks, continuity tests, point-to-point verification, and component validation during and after assembly., • Conduct electrical testing using multimeters, phase monitors, Hipot/Megger devices, primary injection systems, or other equipment as required., • Energize electrical equipment up to 480 VAC and 125 VDC to perform functional and safety testing per test plans and UL/customer requirements., • Inspect output samples using dimensional, mechanical, and electrical test methods., • Ensure final assemblies meet all UL, NEC, and company quality standards before release., • Issue detailed inspection reports for each product and ensure compliance with quality procedures and test plans., • Record all discrepancies, deviations, and rework actions; enter inspection data into the quality database., • Apply inspection labels and document product acceptance once all variances have been corrected., • Review blueprints, fabrication drawings, wiring diagrams, and electrical schematics; report any deviations from specifications., • Assist in identifying root causes of defects in metal fabrication, wiring, assembly, and manufacturing processes., • Recommend and support continuous improvement initiatives to enhance workmanship and reduce rework., • Assit in training production team members on quality control practices relevant to fabrication, mechanical assembly, electrical wiring, and UL standards., • Support customers during Factory Acceptance Testing (FAT), providing technical clarity as needed., • Monitor production equipment and tools to ensure safe operation and compliance with internal and regulatory requirements., • Maintain measurement and test equipment, schedule calibrations and update equipment logs., • Maintain current knowledge of fabrication techniques, UL 508A requirements, UL 891 standards, NEC guidelines, and industry best practices.Minimum Qualifications:, • High school diploma or GED required., • 1+ years of experience in manufacturing, metal fabrication, electrical assembly, mechanical assembly, or related industrial work (QC experience preferred but not required)., • Basic ability to read and interpret measurement tools (tape measures, calipers, micrometers, multimeters, etc.)., • Basic understanding of mechanical or electrical components (training provided)., • Ability to read or learn to read fabrication drawings, wiring diagrams, or blueprints., • Willingness to learn inspection methods, UL requirements, and company quality standards., • Computer literacy for completing reports and entering inspection data., • Strong attention to detail and commitment to accuracy and safety., • Good communication and teamwork skills., • Ability to manage multiple tasks in a fast-paced manufacturing environment., • U.S. work authorization without sponsorship., • 2+ years of experience in metal fabrication, panel assembly, electrical wiring, or similar industrial work., • 2+ years of experience performing inspections, quality checks, or electrical testing., • Familiarity with UL 508A, UL 891, UL 1558, UL 50/50E, UL 67, NEC, or industrial electrical equipment., • Medical, STD, LTD, 401K, Dental, Vision, • Education and Training provided, • PTO and Paid Holidays, • Advancement Opportunities LtNauJwTvb

Job Description EHC is currently looking for an Entry Level Quality Control Inspector for a client in the Houston, TX area. First Shift: 7:00 am - 5:00 pm $16.00-$19.00 Job Summary: We are seeking a Quality Control Inspector to join our team. You will conduct tests to determine the quality of materials and finished products as well as identify areas of improvement to increase efficiency. Responsibilities: • Daily use and care of measuring equipment consisting of calipers, micrometers, tap measure, height gage and NPT threaded gages, • Daily inspection on inbound and outbound material, • Perform thorough examinations of all materials and finished products, • Implement and improve quality control operating procedures, • Participate in routine visual inspections, • Maintain a clean and safe work environment, • At least 6 months experience, • Experience with fittings flanges pipe preferred, • Forklift experience, • Must be able to do simple math, • Ability to interpret technical product specs, • Strong attention to detail, • Excellent written and verbal communication skills, • Computer proficiency, • Extreme heat and cold temperatures may be encountered during the course of the workday., • Safety boots required.

Job DescriptionSalary: $47,840 - $62,000 MSE Environmental is a growing full-service environmental consulting firm seeking a Level 1 Industrial Hygiene Environmental Field Technician / Consultant (Asbestos, Mold, Lead) professional. The successful candidate will enjoy conducting a variety of field and office tasks in support of mold, asbestos, legionella, water damage consulting, lead consulting, indoor air quality assessment, environmental site assessment, and site characterization projects. Tasks may include collection of field data, sample collection, abatement monitoring and oversight, research and review of regulatory records, directing subcontractors, data evaluation, technical report preparation, and project management. We are seeking individuals desiring long-term career opportunities. The position includes excellent mentoring and training opportunities and the opportunity to learn or participate in other aspects of environmental consulting. Job Responsibilities • Prepare inspection reports based on the inspection findings in timely manner., • Conduct asbestos and lead abatement oversight., • Technicians drive to job sites daily and travel daily for work 100% of the time, • The right individual will perform various duties, including, administrative tasks, errands, customer service and field tech support., • A successful candidate will also be comfortable navigating within the CRM system, able to use google drive, smart phone technology and applications., • Candidates will have strong collegiate level technical writing abilities., • Candidates must be able to perform work with minimal supervision, respond and learn quickly., • Successfully pass certification exams and medical exams., • Follow and live by the MSE Environmental Foundations of our Brand (On website), • Other related duties as assigned. Job Qualifications The successful candidates will be required to speak, read, and write English at the collegiate level. Previous asbestos consulting experience is not required but recommended. OSHA Hazwoper certificate, lead assessor registration, NIOSH 582, and working knowledge of Microsoft Word, Excel, and Adobe Illustrator are pluses. The ability to properly wear and use personal respirator equipment and other forms of personal protective equipment is required. Candidates should have excellent verbal and written communication skills, a POSITIVE attitude, good organizational skills, a strong work ethic, GREAT customer service and be reliable. Candidates must have a current valid driver's license with a clean driving record. Must be able to lift 50 pounds, stand for long periods of time, adjust to various working conditions, and climb ladders. Education/Experience • OSHA 10/30 and HAZWOPER training is plus (Will Train), • Bachelor's degree in Environmental Science, Industrial Hygiene, Geology, or a related science field is (Preferred), • Current Texas Asbestos Building Inspector License (Preferred), • Current Texas Mold Assessment Technician License (Preferred), • Current EPA Lead Risk Assessor Certification (Preferred), • Valid Texas State Driver's License and auto insurance and reliable vehicle for transportation (Required), • A Good driving record with no points (Required), • At least 1 year as an Industrial Hygienist or Environmental Technician is (Preferred), • Literacy in Microsoft Office, Word, Windows 10, Google Searches, Gmail, SmartPhone technology, • NIOSH 582 Certification a plus (Will Train) Skills • Excellent verbal and written communication, • Critical thinking, • Coordination, • Monitoring, • Time management, • Organization Management, • Project management, • Active listening, • Judgment and decision-making, • Complex problem solving, • Strong work ethic, • Reliability, • Attention to detail, • Works well under pressure, • Excellent computer skills, • Excellent smartphone skills, • Presentation skills Local candidates are preferred. Work Schedule • An 8-10 hour workday along with project completion., • Additional after-hours/weekend work is required and performed on a rotating and as-needed basis., • May require travel out of town and be available night and weekend work., • Handle approximately 25 projects per week from start to finish. Physical Demands • Ability to comply with work safety requirements, • Operate a motor vehicle and willingness to travel for long periods of time in the vehicle between projects, • Visually distinguish between colors, • Detect and receive messages over the phone and email, • Setup and takedown company event equipment as needed, • Ability to lift 50-75 lbs and pass annual medical and respiratory fit test exams., • Ability to climb ladders, crawl in crawlspaces, climb roofs, and access other difficult areas., • Must pass a pre-employment background check and drug screen, • Must maintain a professional appearance, • 21 years of age and older, • Must live within daily driving distance of the office Work Environment Job duties are primarily performed at project/job sites within the Environmental Hygienist's assigned region and include extensive travel between sites and laboratories. Benefits • MSE offers a comprehensive, highly competitive compensation package including health benefits with medical, vision, and dental plan., • Earned paid time off and paid holidays included., • MSE Environmental is an equal-opportunity employer and promotes a drug-free workspace., • Salary or Wage commensurate with experience., • Exempt - Full-Time Employment

Job Description Position: QC Inspector Reporting Line: QHSE Manager Department: Manufacturing Facility: Lumpkin Rd. Location: Houston, TX FLSA Status: Non-Exempt Work Status: Direct Indirect Company Overview Gilmore's manufacturing and headquarters are located in Houston, Texas USA, and it has a network of distribution partners that span the globe supporting global regional markets. Our people are fundamental to the success of our organization and remain at the heart of our achievements. At Gilmore, we aim to develop our business around a valued and motivated workforce that encourages personal development and allows our people to flourish and realize their fullest potential. Role Synopsis Inspects finished products, in-process, incoming materials, and witness/reviews of assembly and test functions and documentation, etc. for conformance to company standards. Conducts routine and non-routine analysis of raw materials, in-process, and finished product, using variety of testing devices and procedures to maintain product quality. Essential Duties & Responsibilities (includes, but is not limited to the following) To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. These duties and responsibilities are not listed in order of importance. • Conduct dimensional inspections of machined parts ensuring product meets drawing specifications and standards, purchase order requirements, and customer standards as applicable., • Ability to read and interpret drawings including a thorough understanding of GD&T., • Expert at the determination of best, efficient inspection methods and choosing appropriate measurement and monitoring devices to confirm compliance with drawing requirements., • Use typical measuring instruments and tools in a QC lab (optical comparator, profilometer, hardness testers, height gages, micrometers, calipers, manual CMM etc.), • Zeiss DCC CMM experience with Calypso software is a plus., • Basic tool calibration of hand tools (micrometers, calipers etc.) and understanding of tool measurement capabilities., • Machine shop math including trigonometry., • Understanding of material traceability. Ability to read and interpret material test reports for raw material receiving inspection., • Conducts final inspection for product release prior to the product leaving the facility ensuring all defined requirements are met. Includes paperwork and test package review., • Maintain housekeeping in the Quality Control Lab., • Working knowledge of ISO 9001, API Q1, and has a good understanding of quality management system principles., • Able to work in a team with minimal supervision of required tasks., • Develop work instructions and procedures as directed by the QHSE Manager., • Other duties and responsibilities as assigned by the QHSE Manager Compliance Requirements Gilmore has a Business Ethics Policy (the "Policy") which provides guidance to employees in day-to-day roles, as well as helping the employee and the business comply with the law at all times. The incumbent must read, understand and comply with, at all times, the Policy along with all other corresponding policies, procedures and directives. QHSE Responsibilities • Demonstrate a personal commitment to Quality, Health, Safety and the Environment, • Apply Gilmore, and where appropriate Client Company's, Quality, Health, Safety & Environment Policies and Safety Management Systems, • Promote a culture of continuous improvement, and lead by example to ensure company goals are achieved and exceeded Qualifications/Work Experience Education • High School diploma or equivalent Experience/ Skills • Minimum of 3 years experience as an inspector conducting precision part dimensional inspection and general oilfield valve inspections and tests., • Ability to read and interpret documents such as technical drawings, procedures, operating instructions, and safety rules., • Ability to write routine reports and correspondence., • Ability to solve practical problems and deal with a variety of situations where only limited information is available, with minimal supervision., • Ability to interpret a variety of instructions in English in both written and oral format., • Strong communication and organization skills., • Working knowledge of Microsoft Office software., • Working knowledge of PSI gages and ADT pressure pumps. Preferred • CMM - Coordinate-Measuring Machine experience highly preferred. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Ability to lift and carry files, packages, and boxes weighing up to fifty (50) pounds., • Natural or corrected vision to read printed materials and computer screens., • Natural or corrected hearing and speech to communicate in person and over the telephone., • Capable of properly using standard office equipment, including a telephone, and a computer with keyboard., • Ability to wear required Personal Protective Equipment (PPE). Includes hard hats, steel-toed shoes, safety glasses, etc. Work Environment The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Work will mostly be performed indoors in a controlled environment., • Some exposure to the manufacturing and shop areas All offers of employment at Gilmore, a Control Devices, LLC company, are contingent upon the successful completion of a background check and drug screen.

Job DescriptionDescription: Job Title: Quality Control Inspector III Classification: Full-time, Hourly Non-Exempt Reports To: Quality & Safety Manager, Surface Technologies US Location: Kymera – CASL Houston ABOUT THE COMPANY: Kymera International: Kymera International is a leading global producer of specialty metal powders, pastes, and granules, catering to industries such as aerospace, defense, automotive, and electronics. Our mission is to drive innovation while adhering to the highest standards of sustainability, operational excellence, and ethical business practices. We are committed to continuous improvement and regulatory compliance on a global scale. Job Overview The Quality Control Inspector III is a senior-level role responsible for leading quality inspections, ensuring compliance with regulatory standards, driving process improvements, and mentoring junior inspectors. This role has significant responsibility for auditing, documentation, and quality assurance across the manufacturing process. Responsibilities • Lead visual and dimensional inspections of mechanical parts, machined components, and thermal spray coatings to ensure full compliance with engineering, customer, and regulatory specifications., • Utilize advanced precision measurement tools including calipers, micrometers, bore gauges, depth gauges, height gauges, dial indicators, surface profile gauges, surface roughness testers, and coating thickness gauges., • Verify dimensions, tolerances, surface profiles, and coating thicknesses per drawings, specifications, and customer requirements., • Conduct root cause investigations, support troubleshooting of coating or machining defects, and drive corrective and preventive actions., • Maintain accurate inspection records, nonconformance reports, corrective actions, and full traceability documentation., • Serve as a primary liaison and support internal and external audits, including ISO 9001, AS9100, and safety inspections., • Verify calibration status, proper use, and handling of all inspection and measurement equipment., • Support FOD prevention, process control, and continuous improvement initiatives., • Review and interpret complex engineering drawings, specifications, and quality plans., • Prepare comprehensive reports on inspection results, trends, quality risks, and corrective actions for management., • Provide training, mentoring, and guidance to Inspectors I and II and other production personnel on inspection techniques and quality expectations., • Collaborate with engineers, machinists, production teams, and suppliers to resolve complex quality issues., • Follow all facility and OSHA safety requirements related to machining operations and thermal spray processes, including PPE, hazard communication, and equipment safety., • Expert proficiency with mechanical and precision inspection tools and techniques., • Advanced blueprint and technical drawing interpretation skills., • Strong analytical, problem-solving, and documentation skills., • Experience supporting audits, performing root cause analysis, and driving corrective actions., • Ability to lead quality initiatives and provide mentorship to team members., • Strong collaboration and communication skills with cross-functional teams. Education and Experience • High school diploma required; associate degree in machining, engineering, or related field preferred., • Minimum 5 years of experience in quality control within a machine shop, repair facility, or manufacturing environment., • Demonstrated proficiency with precision measurement tools, including calipers, micrometers, bore gauges, surface profile gauges, and coating thickness gauges., • Strong working knowledge of ISO 9001:2015 and AS9100 standards., • Thermal spray coatings experience strongly preferred., • Demonstrated leadership experience in mentoring or training quality team members., • Ability to read and interpret engineering drawings, specifications, and quality requirements., • Ability to work independently, lead by example, and communicate effectively in written and verbal formats., • Legally eligible for employment in the United States; must meet US person requirements where applicable., • Ability to pass required background check, drug screen, and health screening., • Possession of a valid driver’s license and passport and ability to travel as required. Physical Requirements • Ability to stand, walk, and perform repetitive manual tasks for extended periods., • Strength to lift, carry, push, or pull up to 50 pounds unassisted, repeatedly throughout a shift., • Ability to perform physical tasks, including bending, kneeling, crouching, reaching overhead, and climbing ladders or stairs, as needed., • Capability to pass a respiratory medical evaluation, including hearing and vision exams, and meet all necessary physical qualifications., • Ability to wear and work comfortably in required personal protective equipment (PPE), including gloves and steel-toe boots, for prolonged periods., • Adaptability to work in diverse environments, such as high temperatures, confined spaces, and areas with potential exposure to dust, fumes, and noise., • Coordination and manual dexterity to safely operate machinery, tools, and equipment while maintaining focus on ergonomics and safety. When requested by employees, and when possible, reasonable accommodation may be provided to help individuals with disabilities perform their essential job functions. Kymera is an Equal Opportunity Employer, encouraging diversity in the workplace. EOE: race/color/religion/sex/sexual orientation/gender identity/national origin/disability.

Job Description Position: QC Inspector Reporting Line: QHSE Manager Department: Manufacturing Facility: Lumpkin Rd. Location: Houston, TX FLSA Status: Non-Exempt Work Status: Direct Indirect Company Overview Gilmore's manufacturing and headquarters are located in Houston, Texas USA, and it has a network of distribution partners that span the globe supporting global regional markets. Our people are fundamental to the success of our organization and remain at the heart of our achievements. At Gilmore, we aim to develop our business around a valued and motivated workforce that encourages personal development and allows our people to flourish and realize their fullest potential. Role Synopsis Inspects finished products, in-process, incoming materials, and witness/reviews of assembly and test functions and documentation, etc. for conformance to company standards. Conducts routine and non-routine analysis of raw materials, in-process, and finished product, using variety of testing devices and procedures to maintain product quality. Essential Duties & Responsibilities (includes, but is not limited to the following) To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. These duties and responsibilities are not listed in order of importance. • Conduct dimensional inspections of machined parts ensuring product meets drawing specifications and standards, purchase order requirements, and customer standards as applicable., • Ability to read and interpret drawings including a thorough understanding of GD&T., • Expert at the determination of best, efficient inspection methods and choosing appropriate measurement and monitoring devices to confirm compliance with drawing requirements., • Use typical measuring instruments and tools in a QC lab (optical comparator, profilometer, hardness testers, height gages, micrometers, calipers, manual CMM etc.), • Zeiss DCC CMM experience with Calypso software is a plus., • Basic tool calibration of hand tools (micrometers, calipers etc.) and understanding of tool measurement capabilities., • Machine shop math including trigonometry., • Understanding of material traceability. Ability to read and interpret material test reports for raw material receiving inspection., • Conducts final inspection for product release prior to the product leaving the facility ensuring all defined requirements are met. Includes paperwork and test package review., • Maintain housekeeping in the Quality Control Lab., • Working knowledge of ISO 9001, API Q1, and has a good understanding of quality management system principles., • Able to work in a team with minimal supervision of required tasks., • Develop work instructions and procedures as directed by the QHSE Manager., • Other duties and responsibilities as assigned by the QHSE Manager Compliance Requirements Gilmore has a Business Ethics Policy (the "Policy") which provides guidance to employees in day-to-day roles, as well as helping the employee and the business comply with the law at all times. The incumbent must read, understand and comply with, at all times, the Policy along with all other corresponding policies, procedures and directives. QHSE Responsibilities • Demonstrate a personal commitment to Quality, Health, Safety and the Environment, • Apply Gilmore, and where appropriate Client Company's, Quality, Health, Safety & Environment Policies and Safety Management Systems, • Promote a culture of continuous improvement, and lead by example to ensure company goals are achieved and exceeded Qualifications/Work Experience Education • High School diploma or equivalent Experience/ Skills • Minimum of 3 years experience as an inspector conducting precision part dimensional inspection and general oilfield valve inspections and tests., • Ability to read and interpret documents such as technical drawings, procedures, operating instructions, and safety rules., • Ability to write routine reports and correspondence., • Ability to solve practical problems and deal with a variety of situations where only limited information is available, with minimal supervision., • Ability to interpret a variety of instructions in English in both written and oral format., • Strong communication and organization skills., • Working knowledge of Microsoft Office software., • Working knowledge of PSI gages and ADT pressure pumps. Preferred • CMM - Coordinate-Measuring Machine experience highly preferred. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Ability to lift and carry files, packages, and boxes weighing up to fifty (50) pounds., • Natural or corrected vision to read printed materials and computer screens., • Natural or corrected hearing and speech to communicate in person and over the telephone., • Capable of properly using standard office equipment, including a telephone, and a computer with keyboard., • Ability to wear required Personal Protective Equipment (PPE). Includes hard hats, steel-toed shoes, safety glasses, etc. Work Environment The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Work will mostly be performed indoors in a controlled environment., • Some exposure to the manufacturing and shop areas

Job Description Your Day-to-Day Impact You’ll play a vital role in our (department) team by: • Setup all hand tools readily accessible to the job being performed, • Review work order packet for job to verify correct product is to be produced, • Assure Log Sheets are correct for the product to be produced, • Coordinate with the Gage Lab for proper gages to measure product, • Assure gages are mastered and set as required after production starts, as well as during production operation as required, • Log all measurements for product on to the Log Sheet based on frequency as instructed for product type and Customer, • Identify all rejected product on Digital Log Sheet and describe reason, • Identify all rejected physical product as per instructions and alert operator, • Assure all First and Last Article inspection is conducted as required, • Alert operator and Supervisor if cause of rejection persists and participates in resolving of reason for rejection, • Assure that material for order is correct as described on the work order, • Alert Supervisor and Gage Lab of any concerns regarding performance of gaging or measurement instruments, • Quality minded individual with a dedication to superior products, • Follow all applicable work instructions, specifications, and requirements, • Assist in training of inexperienced inspectors, • Follow all Company Rules, Procedures and Policies, • Follow all Company Safety Rules, • Any other duties as assigned by the Supervisor What You Bring We’re looking for candidates who are sharp, safety-focused, and ready to roll up their sleeves: • 1 year experience as production operator/or previous experience as QC inspector in previous company, • Working knowledge of blueprint reading and basic math., • Must be fluent in English, with the ability to read, write, and communicate effectively., • Ability to understand and execute instructions well, • Get paid for what you know - and earn more as you learn more., • Opportunities to work on cutting-edge equipment, • A culture that values your input and celebrates improvement, • Medical, Dental, and Vision Coverage, • Company-Paid Life Insurance & Short/Long-Term Disability, • Profit Sharing: Up to 4%, • 401(k): Company match 4.5% with no vesting period, • Paid Parental Leave: For birthing and non-birthing parents, including adoptions, • Paid Holidays: 10 days, plus 1 personal floating holiday, • Paid Vacation Time, • Discretionary Performance-Based Bonus Program

Job DescriptionJoin our client's team as a Lead Mechanic/Chief Inspector and play a crucial role in the aviation repair station. As a top-tier engine builder, with a specialty in high-performance engines, our client is seeking a skilled and experienced individual to lead the inspection department. If you have a passion for aircraft engines and a keen eye for quality work, we want to hear from you.Responsibilities: • Perform non-destructive testing and assembly work., • Train, oversee, and assist personnel within the repair station as directed., • Maintain compliance with Federal Aviation Regulations and Airworthiness Directives., • Ensure calibration checks on tools and equipment are up to date., • Supervise all inspection stages from incoming to final approval for return to service., • Manage records and documentation accurately., • Identify defects, report unairworthy conditions, and follow QA procedures diligently.Qualifications:, • 5+ years of experience in aircraft engine maintenance/building., • Powerplant license required; IA not mandatory., • Level II/III NDT certification preferred., • Extensive knowledge of reciprocating aircraft engines and their functions., • Familiarity with Lycoming and Continental engine models., • Strong communication and interpersonal skills.Our client offers a comprehensive benefits package including employer-paid medical and dental insurance, employee-paid vision coverage, a generous retirement savings plan with a matching program, and an annual bonus incentive. Join them and be part of a dynamic team focused on excellence in aviation engineering.

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community “We care for our communities”, • Integrity “We act with integrity”, • Passion “We infuse passion into everything we do”, • Quality “We believe quality comes from a culture of innovation and continuous improvement”, • Inform Environmental Compliance Inspectors and/or other members of the Environmental Compliance Team of observations, violations, activities, etc., • Contact supervisor for priorities and deadlines in the field., • Resolve differences in the interpretation of plans and specifications., • Ensure the safe utilization, storage and maintenance of all documents and tools., • Update Direct Report on progress and delays on every task or assignment., • Ensure safe usage and maintenance of individually assigned company vehicle and field equipment., • Meet established project deadlines., • Carry out assigned duties in accordance with established procedures., • Prepare and submit accurate, legible, comprehensive and complete inspection reports on a daily basis in accordance with established quality procedures., • Review plans, specifications, and shop/working drawings for project activities., • Meet with contractor's supervisors or other project leaders on assigned project sites to discuss and coordinate environmental compliance activities, corrections to existing controls, and implementation of additional controls., • Prepare reports on findings to ensure compliance with applicable state and federal environmental laws, rules, regulations, and policies., • Evaluate environmental impact of construction activities including water quality/wetland/hazardous material geological, cultural or historic resources., • Keep abreast of current environmental developments to include laws, regulations, policies and procedures., • Responsible for maintenance and update of water quality records such as Storm Water Pollution Prevention Plans., • Monitor and evaluate the effectiveness of environmental controls., • High School Diploma or G.E.D. preferred but not required., • Environmental laws, regulations, and mitigation requirements., • Commercial construction, plans, construction inspection procedures, and specifications, • Reading and interpreting specifications. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. May be regularly required to stand, walk, and drive vehicle short and/or long distances. Occasionally required to climb or balance, stoop, kneel, crouch, or crawl. Frequently required to talk or hear. Occasionally required to lift and/or move up to, 50 pounds. Specific vision abilities required by this job include close vision, distant, color peripheral vision, depth vision, and ability to adjust focus. May be occasionally exposed to work near moving mechanical parts, fumes or airborne particles and frequently exposed to outdoor weather conditions. Noise level for this position is loud. This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. Work responsibilities may require out of town travel to Raba Kistner offices, client offices and project locations. EOE/Disabled/Veteran Drug Free Workplace #LI-ONSITE

Job DescriptionDescription: As a Data Center Quality Inspector I, you provide superb quality control services for our clients by performing essential inspections of electrical equipment and systems, including switchgear and substations. Detailed knowledge of mechanical and instrumentation is critical to conduct inspections, interpret electrical drawings and specifications. You ensure the equipment and technicians around you comply with company and site safety requirements. Reporting daily about your findings, including time tracking and special inspection reports will be routine. You will approve and submit important documents such as Lockout/Tagout (LOTO) requests, team reports, and time tracking reports. You take pride in assuring that our clients receive safely installed and functional equipment every time. If you are analytical, detail-oriented, communicate effectively, and prioritize safety, this opportunity may be an excellent fit. Travel may be required. Responsibilities • Ability to read and interpret electrical drawings and specifications. Prepare written documentation such as daily narratives (work reports), special inspection reports, and daily time tracking., • Perform inspections of switchgear, standby generators, protective relays, and other electrical distribution components., • Submit LOTO requests, review and approve team reports, and time tracking., • Competitive pay, depending on experience., • Medical, dental, vision, 401(k) with company match, among other benefits., • Holidays and paid vacation time., • Extensive learning and development opportunities.Requirements:, • High school diploma or equivalent. Higher education degree preferred., • Minimum of two years of experience inspecting, testing, commissioning, or operating electrical distribution systems. Commercial or naval nuclear experience is strongly desired., • OSHA 10-hour Construction Safety training., • Commitment to excellence and high standards.

Job Description JOB DESCRIPTION JOB TITLE: Maintenance Manager REPORTS TO (JOB TITLE): Director of Operations DEPARTMENT: Various POSITION SUMMARY: The Maintenance Manager is responsible for overseeing the maintenance, repair, and regulatory compliance of the company’s fleet to ensure safe, reliable, and cost-effective operations. This role manages maintenance personnel, vendor relationships, preventive maintenance programs, and ensures compliance with all applicable federal, state, and local regulations (including Federal Motor Carrier Safety Administration standards). JOB SPECIFIC RESPONSIBILITIES: • Assumes full management responsibility for the entire maintenance department including maintenance and parts control, compliance, quality assurance and warranty administration of vehicles; recommends and administers policies and procedures., • Selects, trains, motivates and evaluates assigned personnel; provides or coordinates staff training; works with employees to correct deficiencies; implements discipline and termination procedures., • Ensure compliance with DOT and Federal Motor Carrier Safety Administration regulations, including inspections, maintenance records, and out-of-service criteria., • Develop and enforce preventive maintenance (PM) schedules to minimize downtime and extend asset life., • Plans, directs and coordinates, through subordinate level staff, the department's work plan; assigns projects and programmatic areas of responsibility; reviews and evaluates work methods and procedures; meets with key staff to identify and resolve problems., • Maintain accurate documentation for audits, inspections, and compliance reviews., • Directs, monitors and participates in the preparation of a variety of periodic and special reports such as KPI., • Oversees and participates in the development and administration of the department budget; approves the forecast of funds needed for staffing, equipment, materials and supplies; approves expenditures and implements budgetary adjustments as appropriate and necessary., • "Manage relationships with external vendors, parts suppliers, and service providers., • Ensure proper inventory control of parts, tools, and equipment, • Other duties as assigned EXPERIENCE: 7 - 10 years of job-related experience - required. EDUCATION: Minimum Formal Education: Four-year bachelor’s degree or equivalent experience LICENSES and CERTIFICATIONS: Required. • Diesel Mechanic Certification (ASE), • Brake Inspector Certification (FMCSA Regulation 49 CFR), • OSHA 30-Hour Certification

Job Description INSPECTOR JOB DESCRIPTION Job Responsibilities include but are not limited to: • Fire Sprinkler, • Perform duties in a cost-effective manner while inspecting structures which contain Fire Sprinkler Systems, • Correctly complete all Inspection related documentation, • Develop working knowledge of applicable NFPA and common materials and installation processes. Maintain RME-I license as well as obtain and maintain TCEQ backflow licensing (B-PAT), • Properly perform needed sprinkler system inspections and all associated components including, but not limited to, Wet, Dry, Fire Pumps, Pre-action, Deluge, Antifreeze Loops, backflows, etc., • Fire Alarm, • Develop working knowledge of applicable NFPA standards, • Correctly complete all inspection related documentation, • Perform duties in a cost-effective manner while inspecting structures which contain Fire Alarm Systems, • Properly perform needed alarm system inspections and all associated components, • Cross-train additional licensing duties in order to obtain multiple licenses, • Extinguisher/Hood/Special Hazard, • Develop working knowledge of applicable NFPA standards and manufacturer installation manuals and requirements, • Correctly complete all inspection related documentation, • Perform duties in a cost-effective manner while inspecting structures which contain Fire Extinguishers, Hood Suppression Systems, and/or Special Hazard (dependent upon license held), • Properly perform needed extinguisher/suppression system inspections and all associated components, • Cross-train additional licensing duties in order to obtain multiple licenses, • Super Tech, • Holds all Fire licenses, including, RME-I, FAL, FEL-A, B-PAT (Backflow Preventer), • Lead large inspections and special projects with multiple techs or solo, • Perform duties in a cost-effective manner while inspecting structures which contain multiple facets of fire protection, • Assist and/or fill in for inspection manager as required, • Believe In, Live, and Support Our Mission Statement, Core Values and Business Plan Daily, • Safety First, • Ensure timely and complete submittal of JSAs, Toolbox Talks, Audit Forms, etc., • Ensure timely and accurate Incident and Accident Reporting, • Hold yourself accountable for all Safety Initiatives, • Hold yourself accountable for Safe Driving of Company Vehicles, • Ensure awareness and support of Stop Work Authority, • Complete all Training Requirements – Safety, Certifications, etc., • Submit accurate Timesheet – job numbers/names, OT and travel pay, completed on time, etc., support transition to Electronic timesheet submittal, • Ensure all required documents are complete, accurate and professional, with required signatures, • Ensure proper Inventory Management – review, update, and approve packing slips – submitted timely, proper material management, • Ensure proper Maintenance and care of equipment – trucks, lifts, tools, etc., • Keep jobsites clean and organized, • Ensure Production Efficiency – awareness of budget vs. actual labor hours and proactive communication with superintendent, • Support and Ensure Adherence to Company SOPs – Purchase Orders, Change Orders, etc., • Timeliness – at the job on time; attendance; communication with supervisor; paperwork, • Ensure Customer Satisfaction and respond to Customer Satisfaction Survey feedback improvement opportunities, • Maintain Quality Control i.e. reduce the need for return trips and warranty work, • Maintain a Professional appearance, • Communicate effectively and professionally within the department and with internal and external customers, • Teamwork – maintain positive interactions within your team, local office, etc., • Actively Participate in required team meetings, • Minimum education of High School Diploma or Equivalent, • Required NICET level for their trade and applicable/current TX Dept of Insurance license, • Strong understanding of materials, tools equipment, and procedures used in the installation process, plus working knowledge of NFPA standards, • Current and clear TX DL and clean driving record as well as applicable criminal background Work Experience: • Sprinkler, • Minimum of 5 years experience (install/service experience is a plus), • Alarm, • Minimum of 3 years experience (install/service experience is a plus), • Extinguisher, • Minimum of 2 years experience, • Hood Suppression, • Minimum of 3 years experience, • Special Hazard, • Ability to take direction from upper management, • Accurately complete and maintain all paperwork, • Maintain vehicle and tools as per company policy, • Must have valid state driver's license and good driving record, • Willing and able to perform testing and maintenance, • Willing to identify and notate inspection deficiencies and service required to correct found deficiencies, • Able to work effectively in a team environment; ability to accurately work under pressure in meeting scheduled time frames., • Capability to work independently and complete duties and projects with moderate supervision (a must), • Strong customer service skills, • Meticulous attention to detail, • Excellent oral and written communication skills, • Maintain a clean and safe work environment, • Comply with and embrace all Core Values and the safety handbook

Job Description Organization UPG Company, LLC Position Quality Control Inspector - 3rd Shift Direct Reports None. FLSA Status Hourly – Non-Exempt (NE) Position Location 7865 Northcourt Rd, Suite #100, Houston, Texas 77040 Website Company Overview UPG is a global manufacturer of complex assembled components and finished products, serving the data center, automotive, energy, and industrial markets. UPG products are sold to over 40 global blue-chip customers, and the company has developed a strong market position based on its technical expertise combined with unparalleled quality, delivery, and service levels. UPG operates three world-class manufacturing facilities – in Houston, Texas; Cardiff, Wales; and Suzhou, China – that offer a complete range of capabilities, including product design, engineering, rapid prototyping, and plastic injection molding, along with a suite of other technology platforms, value-added assembly, and global supply chain management. Reporting Relationship Reports to the Quality Manager Core Function The Quality Inspector ensures all products meet established quality standards and customer specifications by performing precise start-up, in-process, and final inspections in accordance with the Quality Plan. This role requires a highly qualified individual with strong experience in dimensional measurement, blueprint and part drawing interpretation, and the use of precision inspection tools such as calipers, micrometers, gauges, and coordinate measuring machines (CMM). The inspector verifies conformance to specifications, identifies and documents nonconformances, and communicates findings to production and quality teams to support corrective actions, ensuring product integrity and consistent adherence to quality requirements throughout the manufacturing process.. Essential Duties & Responsibilities * Performs thorough start-up, in-process, and final inspections in accordance with the company’s Quality Management System (QMS), customer specifications, and approved procedures. * Conducts precise dimensional inspections using calipers, micrometers, gauges, and CMM equipment to verify product conformance to drawings and tolerances. * Performs inspection of first articles, sample runs, and process/tooling modifications, ensuring accurate documentation and timely feedback to production. * Conducts capability studies and other analytical assessments to evaluate process stability; clearly communicates findings and improvement recommendations. * Interprets part drawings, GD&T symbols, and customer requirements to ensure full understanding of product expectations and critical characteristics. * Regularly reviews inspection instructions and control plans to ensure inspection accuracy and relevance. * Verifies that product labeling and packaging meet all quality and customer requirements before release. * Accurately documents inspection results, nonconformances (NCMRs, VRRs, RMAs), and ensures proper quarantine of nonconforming materials; promptly notifies the Production Supervisor and Quality Manager. * Records inspection data and reports in WIN-CONTROL and other approved systems with accuracy and completeness. * Monitors Statistical Process Control (SPC) trends, identifies out-of-control conditions, and initiates appropriate corrective or containment actions. * Effectively communicates inspection results, quality issues, and relevant shift information to the oncoming inspector and production leadership. * Maintains all inspection equipment in proper working condition, promptly reporting calibration needs, damage, or accuracy concerns. * Assists in training new operators and inspectors to ensure consistent application of inspection standards and quality practices. * Demonstrates leadership, self-motivation, and a high level of attention to detail while promoting a culture of quality and safety throughout the facility. * Adheres to all company safety procedures, policies, and quality standards in every aspect of work. * Provides proactive support to the Quality Manager through accurate reporting, effective communication, and collaboration on quality improvement initiatives. * Actively supports and enforces the company’s Quality Policy, Objectives, and Continuous Improvement initiatives. * Performs other related duties as assigned by the Supervisor or functional managers. Additional Job Information This job description is not designed to cover or contain a comprehensive listing of activities, duties, and responsibilities that are required of the employee for this job. Duties and responsibilities may change at any time with or without notice. Training Requirements ISO Quality Procedures (ISO9001 / AS9100 / ISO13485) Skills Basic computer and math skills to measure specifications. Educational Requirements High School diploma or equivalent General Education Diploma. Experience can be substituted for education. Experience 3 to 5 years of working as a QC Inspector in a manufacturing environment Physical Requirements Light Work – Exerting up to 20 pounds of force occasionally, and / or up to 10 pounds of force frequently, and / or lift, carry, push, pull or otherwise move objects. If the use of arm and / or leg controls requires exertion of force greater than sedentary work and worker sits most of the time, the job is light work. Visual Acuity The worker is required to have close visual acuity to perform an activity such as; preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and or operation or machines (including inspection); using measurement devices; and/or assembly or fabrication of parts at distance close to the eyes. Work Conditions The worker is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature change. The worker is subject to noise: There is sufficient noise to cause a worker to shout in order to be heard above ambient noise level. The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. AAP/EEO Statement Equal Opportunity Employer: Disability/Veteran