Offres scada à Irving, TexasCréer des alertes d'emploi

JOB SUMMARY The position is broadly responsible for the development of electrical and process control systems for equipment used in the Food Processing, Pharmaceutical, Chemical, Water Treatment, Manufacturing and other industries. Essential Functions Essential Function Understanding of customer’s specific application and process requirements Developing instrumentation lists, electrical wiring schematics, Bill of Materials, control panel layout, one line and point-to-point wiring diagrams. PLC and SCADA programming Preparing budgetary cost estimates Supervising fabrication of control systems, performing factory and site checkout Managing and physically participating in equipment and systems installation and startup Developing and maintaining project documentation: drawings, Bill of Materials and equipment IOM manuals Providing post-installation troubleshooting and technical support Required for All Jobs • Performs other duties as assigned, • Complies with all policies and standards QUALIFICATIONS Education Education Level Education Details Req/ Pref Associate's Degree Bachelor's Degree Mechanical, chemical, or electrical engineering Required Work Experience Experience Experience Details Required/ Preferred 1-3 years 4-6 years 7-9 years 10+ years Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, PLC/SCADA programming, technical writing, and communication skills Required Knowledge, Skills and Abilities Industrial gases industry experience would be helpful. Good English writing and speaking skills are required. Experienced hands-on project manager with excellent electrical controls engineering, AutoCAD, technical writing, and communication skills Ability to read, understand and create electrical drawings, block diagrams and P&ID’s Experience in process automation, instrumentation, and PLC/SCADA systems Comprehensive experience programming Allen-Bradley CompactLogix, ControlLogix, WonderWare and Siemens PLCs and HMI Working knowledge of motors, blowers, pumps, and compressors Familiarity with NEC and NFPA standards Licenses and Certifications Licenses/Certifications Licenses/Certification Details Time Frame Required/ Preferred PHYSICAL DEMANDS/WORKING CONDITIONS Physical Demands Category: Physical Demands A thorough completion of this section is needed for compliance with legal standards such as the Americans with Disabilities Act. The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical Demand N/A Rarely Occasionally Frequently Constantly Weight Stationary Position X Move/Traverse X Stationary Position/Seated X Transport/Carrying X Exerting Force/Pushing X Exerting Force/Pulling X Ascend/Descend X Balancing X Position Self/Stooping X Position Self/Kneeling X Position Self/Crouching X Position Self/Crawling X Reaching X Handling X Grasping X Feeling X Communicate/Talking X Communicate/Hearing X Repetitive Motions X Coordination X Travel Requirements Estimated Amount Brief Description 50% Extensive domestic travel will be required

About Us: MN8 Energy is one of the largest independent solar energy and energy storage owner-operators in the U.S., serving enterprise customers with clean energy and complementary solutions, such as battery storage and EV Charging, to enable an electrified, decarbonized world. Originally founded inside of Goldman Sachs in 2017, our fleet has grown to nearly 3-gigawatts of solar, including 850 projects across 27 states, and over 270 megawatts of battery storage projects, with each project tailored to achieve the bold decarbonization targets and goals of our more than 200 blue-chip customers. MN8 is headquartered in New York with offices in Boca Raton, Florida; Dallas, Texas, and Madrid. Overview: The Control Room Operator is responsible for 24×7 remote operations of MN8 ’s renewable fleet across the country. This includes monitoring and operational support via SCADA and CMMS systems . Following established processes and procedures to ensure proper and safe operations. Identifying and efficiently dispatching personnel to correct deficiencies. Communicating with external parties to such as Scheduling Coordinators, Transmission Operators and other various regulatory personnel. Additionally, Control Room Operators are responsible for ensuring all NERC regulations and requirements are met . All remote operations will be performed from the Dallas, Tx Office. As the Control Room Operator, you will: • Monitoring and operating sites as directed by procedures and Operational Directives., • Utilize provided information to make decision with financial impact to the company., • Interacting with Field personnel, Grid Operators, and our customers., • Ensure all identified site issues have a corresponding, properly documented ticket within the CMMS., • Review and ensure Logging of regulatory calls, resets and all other items not handled by the CMMS system., • Investigate and escalate identified issues to Performance Engineering as required., • Ensure operation and maintenance activities meet or exceed contractual obligations. (e.g. performance and availability guarantees, preventive maintenance, reactive response times, landscape management, panel washes, non-conformity correction, etc.), • Provide information and support to dispatched field personnel to ensure successful site response., • Any other duties and responsibilities as determined by the manager. Our Ideal Candidate will have: • 2-Year technical degree, Military experience in a technical field, or equivalent industry experience., • Operational knowledge of solar, storage, or EV charging., • Knowledge and understanding of solar plant construction and comprehension of how onsite equipment interacts with the overall plant., • Ability to communicate in English both orally and in writing., • Experience in SCADA systems, PLC, or plant control systems., • Outstanding communication and interpersonal abilities., • Experience in plant operations and control rooms., • Experience in Generator Operator, Scheduling Coordinator, or Transmission Operator is preferred., • Knowledge of electrical theory., • Extensive experience with Microsoft Office Suite to include word, excel, OneNote, and outlook., • Ability to multitask and adapt to changing priorities., • Ability to make decisive decisions based on available information when support personnel are not available. Physical Requirements: • Ability to drive a vehicle., • Ability to stand for long periods of time., • Ability to walk distances up to 5 miles in a day., • Ability to receive detailed information through oral and written communication, and to act upon as needed., • Required to have visual acuity which includes depth perception., • Required to have visual acuity to determine the accuracy, neatness, and thoroughness of the work assigned. Other Requirements: • May be required to travel., • Required to work in office conditions., • Required to perform all duties in-office., • Required to work 4×10 work week on a Night shift; To include Holidays and Weekends., • Work in a fast-changing environment that may require quick decisions with limited processes and procedures. How we set you up for success: At MN8, we know our most valuable resource is our people. That’s why we offer the following benefits. By investing in you, we know we are investing in the clean energy of tomorrow. • Medical/Dental/Vision Insurance beginning the 1st of the month following your date of hire, • Paid Time Off, • Paid holidays and floating holidays, • 401(k) with competitive employer match, • Parental leave MN8 Energy is an Equal Opportunity Employer and fully subscribes to the principles of Equal Employment Opportunity to ensure that all applicants and employees are considered for hire, promotion, and job status without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, marital or familial status.

Position Overview We are seeking a Senior Controls Engineer to lead and execute automation and controls projects within a manufacturing environment. This role is highly project-driven, focused on designing, programming, commissioning, and optimizing industrial control systems to improve production reliability, throughput, and safety. This is a hands-on engineering role with ownership from concept through implementation, working closely with operations, maintenance, and project teams. Key Responsibilities • Lead controls engineering efforts across capital and continuous improvement projects, • Design, program, and troubleshoot PLC, HMI, and SCADA systems (Allen-Bradley, Siemens, etc.), • Develop and modify electrical schematics, panel designs, and control architectures, • Execute system integration, commissioning, and startup support for new equipment and production lines, • Identify and implement automation improvements to increase uptime, reduce scrap, and improve efficiency, • Support legacy system upgrades and migration to modern PLC-controlled systems, • Perform root cause analysis (RCA) and drive corrective actions for production issues, • Collaborate cross-functionally with operations, maintenance, and external integrators, • Ensure compliance with safety standards (NFPA, OSHA, functional safety where applicable), • Bachelor’s degree in Electrical Engineering, Controls Engineering, or related field, • 7–12+ years of controls engineering experience in a manufacturing environment, • Strong experience with:, • PLC programming (Allen-Bradley, Siemens, etc.), • HMI/SCADA systems (Ignition, FactoryTalk, WinCC, etc.), • Electrical design, schematics, and panel layouts, • Proven experience with capital projects, line builds, or major system upgrades, • Ability to troubleshoot live production systems under pressure, • Experience with functional safety systems / safety PLCs (FSE a plus), • Exposure to robotics, vision systems, or advanced automation, • Experience leading projects or mentoring junior engineers, • You can walk into a plant and quickly diagnose system issues, • You’ve taken projects from concept → commissioning → production, • You improve systems that deliver measurable ROI (uptime, throughput, cost savings), • You’re equally comfortable programming, troubleshooting, and working on the floor

Technical Manufacturing Sales Representative A leading provider of next‑generation industrial intelligence solutions is looking for a driven Technical Manufacturing Sales Representative to accelerate growth with manufacturers embracing digital transformation. This role is perfect for someone with a strong consultative sales background who enjoys engaging with technically sophisticated buyers and driving real outcomes through technology adoption. You’ll focus on understanding customers’ operational pain points, positioning advanced AI‑enabled tools that deliver quality and efficiency gains, and closing revenue with strategic manufacturing accounts. If you enjoy collaborative selling, bringing clarity to complex problems, and influencing decision makers at all levels, this is an exciting opportunity for you. Key Responsibilities • Partner with manufacturing clients to understand strategic challenges and identify opportunities., • Execute consultative sales engagements from initial outreach through negotiation and close., • Present tailored solution demos that directly connect product benefits to client KPIs., • Maintain strong sales discipline including pipeline management and forecast accuracy., • Collaborate with internal teams to align approach and articulate market feedback., • Travel as required to support customer meetings and industry events. Preferred Qualifications • 3+ years of sales success in technical or solution‑led roles, ideally with industrial clients., • Ability to engage with technical stakeholders and translate product features into business value., • Comfortable managing complex sales cycles independently., • Knowledge of manufacturing technologies such as AI, machine vision, SCADA, MES., • Prior experience in software or SaaS sales., • Technical background or experience selling without dedicated technical resources. About Blue Signal: Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at bit.ly/46Gs4yS

Job Title: I&C Design Engineer Employment Type: Direct Hire Location: Dallas, TX – (onsite 4 days/week, off every other Friday) Salary: $110-130k Benefits: • Medical, Dental, Vision, • Life Insurance, • 401k, • PTO, • Holiday Summary: Akkodis is seeking an I&C Design Engineer for a DIRECT HIRE position in the Dallas, TX area. The desired candidate will have 5+ years of previous experience design for electrical instrument and controls. The I&C Engineer will be responsible for the design/development of industrial control systems including SCADA, PLC, and HMI systems. This is an excellent opportunity to support an exciting company in the electrical engineering industry. Responsibilities: • Site assessment and determination of needed instrumentation/SCADA upgrades, • Review of existing project documents – P&ID, system architecture, electrical drawings, • Coordination with clients on specific needs, • Document findings – Write assessment or report of existing conditions and recommendations, • Design/development of project drawings, including P&ID, system architecture, loop diagrams, installation details, • Create project specifications, including instrumentation, networking, control narrative strategies, software and hardware requirements for SCADA, PLC, and HMI systems, • Quality Control/Quality Assurance of project documents, • Attend/Conduct project meetings with client, • Review and comment on project submittals, • Coordination with Electrical Engineering Department Required Skills: • Bachelors Degree in an Engineering related field is required., • A minimum of 5 years of relevant I&C experience is required., • MUST HAVE PE or EIT and sitting for PE soon., • Must have experience designing SCADA, PLC, and HMI systems., • Strong background in AutoCAD is preferred., • Registered Professional Engineer (PE) or Engineer-in-Training (EIT) in Texas is required., • Experienced in the design of construction documents., • Write Technical Memoranda based on site assessment., • Drawing/PDF markups., • Design relay schematics (motor control)., • PLC and SCADA HMI development and creation of PLC I/O lists, • Wide Area Network (WAN) design, including radio and cellular communications, • Fiber optic cable specification, • Control panel design, • VFD design/interface, • Physical and cybersecurity assessment and design preferred., • A proactive, solution-oriented approach to challenges, with a focus on team success., • Strong ability to foster and maintain professional, cross-functional relationships. If you are interested in this I&C Engineer job, then please click apply through Akkodis. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit The Company will consider qualified applicants with arrest and conviction records.

Position: Controls & Integration Engineer I, Mechanical Location: Remote Job Id: 917 of Openings: 1 TITLE: Controls & Integration Engineer I, Mechanical LOCATION: Dallas, TX POTISION SUMMARY: Controls Engineers are responsible for designing, developing, installing, and maintaining equipment used to monitor and control systems, equipment and processes. They work in various industries including building management systems, power system automation and protection systems. Controls engineers are technical experts in areas such as advanced process control, instrumentation, distributed control systems, PLCs, and SCADA systems. Controls engineers use these skills to design and implement solutions to our customers' complex needs. Specific areas of expertise for this position include monitoring and control systems in Data Centers and /or mission critical environments. Experience in Building Automation Systems (BASS) and field device configuration such as field level controllers, PLCs, protocol converters, and SCADA/HMI software. Experience in Electrical Power Monitoring Systems (EPMS) and configuration/programming of electrical gear interfaces is beneficial. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Technical Responsibilities • Design / Engineering, • Assists Senior Engineers in design documents for SCADA/Automation projects, • Developing design document narratives, • Perform requirements analysis, • Understanding of Sequence of Operations (SOO) / System Functional Documentation, • Create Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications), • Comment Resolution, • Reviews and comments on 3rd party design documents for SCADA/Automation projects in support of large programs/projects, • Review design document narratives, • Perform execution and design scope gap analysis, • Review Sequence of Operations / System Functional Documentation to ensure compliance with project requirements, • Review Subsystem Designs (CAD / Panels / Layouts / Wiring / SCADA Screens / Hardware / Communications) for project compliance, • Assist in reviewing project specifications, • Assist in creation of testing plans and procedures for Integrated Systems Factory Testing, • Programming, • Program / configure / troubleshoot Controllers, PLCs, RTUs, and/or HMI systems, • Testing / Troubleshooting / Deployment / Commissioning, • Assist senior engineers in creating and updating testing and commissioning procedures, • Preparation of test reports, • Originates test procedures, • Commissioning of deployed systems, • Development of test equipment and simulation devices, • Perform Factory and Field TestingMaintenance, • Maintenance, • Perform troubleshooting on service calls to existing and legacy system operators, • Perform hardware / software upgrades and replacements on existing systems Managerial Responsibilities, • Estimates, • Assists senior engineers in preparation of cost estimates and supporting documentation, • Work with relevant stakeholders to review scope of project, • Conduct any surveys, inspections, tours, etc. of client sites, as required, • Assists senior engineers in evaluation and pricing of change orders from vendors, • Personnel Management, • Assigns tasks and coordinates with Technical Staff, • Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Education/Experience:, • Bachelor's degree in electrical or mechanical engineering and 2-5 years field experience, • Associate degree in the electrical or mechanical field (add 3 years field experience), • High school diploma (add 5 years field experience), • 2-5 years' experience with designing and servicing controls systems for chiller plants, complex air distribution equipment, equipment installation, and testing, • Experience in reading mechanical and control schematics, • Experience in building automation systems (BAS) startup, configuration, and calibration, • Experience in testing and troubleshooting control systems, • Experience using basic electrical and hand tools, • Experience using testing, calibration, or industry-specific tools and software, • Experience testing, reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc., • Experience with test equipment and test equipment software, • Experience with networking design, configuration, and troubleshooting, • Experience with air handlers, chiller plant systems and data center CRAC units, • Ability to travel up to 80%, • MUST BE A US CITIZEN Computer/Networking Skills:, • Experience in OT and IT networking technologies and topologies, • Experience troubleshooting and diagnosing OT and IT networks and protocols, • Experience in CAD/CAE Software (Visio, AutoCAD), • Experience in schedule management software (Project, Primavera P6), • Standard Office Software (Microsoft Word, Excel, Access etc.) Certificates and Licenses:, • Required Certifications, • Certification in one or more PLC / Automation Platform, such as: Niagara N4, Schneider, Rockwell, Siemens, JCI, ALC, Distech, etc., • Certification in one or more SCADA platforms, such as: Iconics, Ignition, Aveva, etc., • Preferred Licenses / Certifications, • Design Build Institute of America (DBIA), • Certified SCADA Security Architect (CSSA), • Certified Automation Professional (CAP) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this job, the employee is regularly exposed to computer screens for an extended period of time; Sitting for extended periods of time; Reach by extending hands or arms in any direction; Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard; Listen to and understand information and ideas presented through spoken words and sentences; Communicate information and ideas in speaking so others will understand; Read and understand information and ideas presented in writing; Apply general rules to specific problems to produce answers that make sense; Identify and understand the speech of another person. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. *We utilize E-Verify #LI-TG1 Pay Range: $85,996 - $129,050 per year Apply for this Position

Remote SCADA engineering opportunity with leading national datacenter controls provider! This Jobot Job is hosted by: Kurt Holzmuller Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. The engineer focuses on device connectivity, protocol integration, databa

Insight Global's client is looking for someone to operate and monitor pump stations, water towers, valves, and wastewater lift stations using the SCADA system to ensure efficient water and wastewater operations.

We are seeking an experienced Manager Infrastructure & Digital Workplace to evaluate and enhance the effectiveness of IT controls, security measures, and compliance with regulatory requirements. Familiarity with OT network infrastructure, SCADA/DCS systems, and security integration into SDLC.

Job DescriptionDescription: As an Electrical Design Engineer, you will play a critical role in guiding the planning, coordination, and execution of advanced electrical systems on large-scale infrastructure projects. You will work cross-functionally with internal teams and external partners to ensure that all designs are technically robust, code-compliant, and aligned with project objectives. Your focus will be on delivering reliable, efficient, and scalable electrical solutions while upholding safety, quality, cost, and schedule commitments. Requirements: · Bachelor’s degree in Electrical Engineering or Power Engineering with electrical building systems emphasis. · Revit BIM design experience required. · Proficiency in power distribution and lighting design, including controls implementation. · Experience with short circuit analysis and utilization of analytical modeling software such as SKM or similar tools. · Strong background in the design, construction, and commissioning of medium and low voltage electrical distribution systems, and power management or SCADA tools. · Preferred qualifications include a Professional Engineering (PE) license. · Experience in mission-critical facilities and their electrical/mechanical infrastructure. · Knowledge and experience in estimating, electrical design, operation, and commissioning of substations, switchgear, and power monitoring. · Minimum 5 years' experience in A/E industry preferred. · Comprehensive understanding of professional services from conceptual design through project close-out. · Strong written and verbal communication skills, organizational skills, and ability to motivate and mentor staff. · Familiarity with sustainable design approaches and related project impacts. · Passion for improving workflows and mentoring team members. · Proficient with Microsoft Productivity Suite products. Job Responsibilities · You will serve as a key liaison between internal departments, external consultants, contractors, and the Engineer of Record (EoR) to troubleshoot and resolve electrical design challenges. · You will lead the development and review of electrical documents, including one-line diagrams, load calculations, panel schedules, submittals, technical studies, and RFIs. · You will research and develop emerging trends and new technologies to optimize electrical systems and infrastructure in data centers, enhancing efficiency, reliability, and scalability. · You will be responsible for ensuring the timely delivery of design packages by identifying bottlenecks, introducing efficiencies, and proactively managing evolving project requirements. · You will ensure electrical systems meet all applicable codes and standards (NEC, IEEE, IEC) while maintaining design quality and mitigating technical risk. · You will contribute to budget management by evaluating the cost impact of design changes, tracking electrical expenditures, and analyzing contractual obligations tied to the EoR. · You will participate in risk assessment and commissioning efforts, including factory and site acceptance testing, milestone inspections, and integration verification. · You will coordinate closely with mechanical, controls, and architectural teams to ensure the electrical systems are fully integrated into the broader design framework. · You will mentor and support junior engineers, reinforcing consistent design practices and ensuring knowledge continuity across the team. · You will help capture lessons learned and apply them to improve future design processes, standards, and project outcomes. · You will support construction activities in the field, resolving installation issues, conducting walkthroughs, and ensuring a successful handoff to operations.

Job Description The Dahill Group is pleased to be assisting our client, a well-established and highly regarded Texas based E&P company in search of an exceptional Production Accounting Technician. Production Accounting Technician Position Overview: The Production Accounting Technician will play a critical role in ensuring the accuracy, completeness, and integrity of daily and monthly production data. This position supports the Operations, Accounting, and Regulatory teams by maintaining allocation systems, validating field data, and preparing state and partner production reports. The ideal candidate is detail-oriented, analytical, and comfortable working across multiple software platforms and departments. Key Responsibilities: Production Data Surveillance & Management • Perform daily surveillance within the field data gathering (FDG/FDC) system to identify, flag, and resolve discrepancies in data entry or allocation calculations., • Interface with field personnel, SCADA providers, and software vendors to ensure accurate, timely, and complete production data., • Update Field Data Capture (FDC) and accounting systems with new wells, recompletions, shut-ins, facility changes, and removed assets, including allocation setups and modifications., • Input well test data into the allocation system and update gas meter full-wellstream factors accordingly. Monthly Allocation & Reporting • Submit monthly allocated production volumes to Accounting, Operations and Engineering teams., • Review plant statements, purchaser/settlement statements, and compare measured volumes for accuracy and reconciliation., • Review monthly take-in-kind imbalance statements and route for approval. Regulatory Support • Provide production information and backup documentation for all regulatory filings., • File well test results with the Texas Railroad Commission (TXRRC)., • Prepare and file monthly production reports with the TXRRC., • Prepare and submit monthly gas allocation reports to gas gatherers as required. Data Maintenance & Communication • Maintain and routinely distribute well status lists and shut-in well lists., • Update accounting system files (Quorum) as wells are drilled, recompleted, or plugged., • Coordinate with internal teams to ensure production reporting deadlines are met. Required Qualifications: • 5–10 years of experience in production accounting, operations support, or related oil & gas role., • Working knowledge of production data systems, measurement practices, allocation processes, and FDC programs., • Familiarity with field operations terminology and facility configurations., • Strong Excel skills and familiarity with production accounting software., • Understanding of SCADA and well test data., • Ability to interpret plant statements, purchaser statements, and production volume reports., • Strong analytical skills with exceptional attention to detail., • Basic understanding of data structure and management. Preferred Qualifications: • Experience with Texas Railroad Commission (RRC) filings – critical., • Prior work with Haynesville assets or similar unconventional plays highly desired Core Competencies: • Accuracy & Attention to Detail, • Problem Solving & Critical Thinking, • Data Integrity & Quality Control, • Communication & Collaboration, • Time Management & Deadline Discipline, • Technical & Analytical Aptitude Work Environment: • Office based hybrid, remote or in corporate office, with regular field personnel communication., • Regular collaboration with engineers to investigate data concerns., • Occasional travel to field sites or operations meetings may be required. Compensation: *Base Salary: $85k-$115k – based on experience and background *Target Annual Target Cash Bonus Range: 5% - 10% - range based on experience and industry specific skills Additional Benefits Include: *100% Employer paid Health insurance for employee, spouse and children. *401K employer matches the first 1% at 100% and the next 6% at 50%. *Pension eligibility after completion of 1st year of employment ADDITIONAL NOTES ON LOCATION AND WORK SCHEDULE INCLUDE: **Required to work in the corporate office in Longview, Texas for those within 40 miles of Longview – ABILITY TO work remotely from Houston, Austin, or Dallas-Fort Worth, or Shreveport LA area with a 1 week per month requirement to work in the corporate office in Longview.

Job Description Role Overview: Applied Digital is seeking a highly skilled Data Center Electrical Engineer – Operational Subject Matter Expert (SME) to oversee and optimize the performance, reliability, and efficiency of our data center electrical infrastructure. This role requires deep technical expertise in electrical systems, power distribution, and critical facility operations to ensure the continuous and optimal operation of high-performance data centers. The SME will collaborate with internal teams and external partners to develop operational strategies, troubleshoot complex electrical issues, and drive improvements in system resiliency and efficiency. Key Responsibilities: • Serve as the subject matter expert for all electrical systems within the data center, including power distribution units (PDUs), uninterruptible power supplies (UPS), switchgear, and generators., • Provide technical leadership in troubleshooting and resolving electrical failures, optimizing system performance, and mitigating risks., • Develop and implement operational procedures, maintenance strategies, and reliability programs for electrical infrastructure., • Collaborate with design, construction, and operations teams to enhance electrical system resiliency and scalability., • Analyze electrical system data to identify trends, inefficiencies, and areas for improvement., • Work closely with vendors and contractors to evaluate new technologies and ensure compliance with industry standards., • Conduct root cause analysis for power-related incidents and develop corrective action plans., • Provide training and mentorship to operations personnel on electrical system best practices., • Ensure compliance with all applicable codes, regulations, and safety standards. Required Qualifications: • Bachelor’s degree in Electrical Engineering or a related field., • 7+ years of experience in data center electrical engineering, facility operations, or mission-critical environments., • Extensive knowledge of power distribution, redundancy design, grounding systems, and emergency backup solutions., • Hands-on experience with high-voltage and low-voltage systems, electrical schematics, and load analysis., • Strong understanding of industry standards such as NFPA, NEC, IEEE, and Uptime Institute Tier classifications., • Proven ability to diagnose and resolve complex electrical system failures in real-time operational settings., • Experience with power monitoring and control systems (e.g., SCADA, EPMS, BMS)., • Excellent communication and collaboration skills to work effectively with cross-functional teams. Preferred Qualifications: • Certifications such as PE (Professional Engineer), PMP, or relevant data center qualifications., • Master’s degree in Electrical Engineering, Power Systems, or a related discipline., • Experience supporting design reviews, commissioning, or post-commissioning optimization of data center electrical infrastructure., • Familiarity with reliability-centered maintenance (RCM) and predictive maintenance methodologies., • Working knowledge of energy efficiency practices and electrical load optimization strategies., • Experience with electrical modeling and analysis software such as SKM Power Tools or ETAP., • Background in vendor or contractor management for large-scale power infrastructure projects.

Job Description We are the only U.S. company with a fully integrated rare earth supply chain—from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves—enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI—the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer—and our people are driving that transformation. Position Overview: The Instrumentation Technician is responsible for installing, repairing, calibrating, and maintaining all instrumentation within our facility. The Instrumentation Technician must be able to troubleshoot and repair a wide range of sensors and related equipment, including pH probes, level transmitters, pressure transmitters, flow meters, RTDs, Thermocouples, etc. They will work independently and with other plant personnel to perform preventive, predictive, and routine maintenance tasks. Position Responsibilities: • Install, integrate, calibrate, troubleshoot, repair various measurement and controls equipment that monitor parameters such as pH, conductivity, temperature, oxygen, flow rate, level, mass, and water/air pressure., • Install, maintain, and analyze malfunctions of analog and computerized control devices, controls and instrument loops, and instruments for the Supervisory Control and Data Acquisition (SCADA) system., • Interpret electrical drawings, schematics, P&IDs, PFDs, and technical documentation to ensure all work is done to standard and meets or exceeds safety requirements., • Use Programmable Logic Controls (PLC) and Programmable Automation Controllers (PAC) as a tool for configuring, troubleshooting, and diagnosing production equipment., • Work with EHS to ensure that all work is done to ensure world class health and safety, and full compliance with safety and relevant environmental regulations., • Completion of an approved Certified Electrical Program or equivalent experience., • Minimum of five (5) years of experience in the maintenance and repair of analog and digital industrial control equipment, industrial electronics and test equipment., • Knowledge of uninterruptable power sources, diesel/gas generators, electrical switchgear, power distribution units, variable frequency drives, and automatic/static transfer switches., • Knowledge of building codes and regulations including Life Safety, IBC, NFPA, NEC, and OSHA., • Sound knowledge of Process Safety., • Understanding of proper use of electrical PPE (insulated tools, properly rated insulated gloves, hot sticks, FR clothing, etc.)., • Entrepreneurial mindset, with the ability to prioritize and manage multiple concurrent projects., • 5+ years Electrical within a manufacturing environment in metals, semiconductors, or chemicals industries., • Knowledge of medium and high voltage equipment., • Understanding of arc flash hazards., • Working knowledge of NFPA 70e, NEC, and NFPA codes. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position’s requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work – In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at 7702-844-6111; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! WHAT YOU'LL DO: * Communication network equipment. * Configuration of real-time controllers to serve as RTUs. * Human Machine Interface (HMI) or server to an upstream SCADA client. * Configuration of real-time controllers to perform custom logic such as automatic system. * Configuration of workstations for power system analytic software. * Commissioning/field support. WHAT YOU'LL NEED TO BE SUCCESSFUL: * Experience with configuration of SEL automation, communication products and engineering software, e.g., RTAC, Rugged Computers, DPAC, RTUs, etc. * Experience with server/client SCADA applications. * Experience with design/development suite of HMI applications using Ignition, Zenon, etc * Design communication/automation architecture/diagram, develop bill of materials for automation/communication cabinets, racks, or panels. * Understand, use, and deploy industry standard protocols - Modbus, DNP3, IEC-61850, C37.118, protocol analyzers. * Familiar with industry standard time synchronization protocols/method - IEEE1588/PTP, NTP, SNTP, IRIG, etc * Familiar with IEC-61131-3 or any other object-oriented programming principles. * Experience in performing system checkout, factory acceptance testing, and commissioning for substation automation/communication scope of work. * Basic understanding of NERC-PRC/CIP requirements * Basic understanding of networking principles including the basics of routing, switching, IP address subnetting, firewall configuration/operation and network design and protocols such as PRP, HSR etc. * Familiar with metering integration, transformer tap-changer integration * Experience with electric power transmission, substation, distribution, and/or generation systems and understanding of substation equipment and electrical switchgear. * Working knowledge of electric power systems, protection, relaying applications, integration, and automation applications and familiar and able to analyze electrical one-line drawings, DC/AC Schematics. WHAT YOU BRING TO US: * B.S. in Electrical Engineering or relevant discipline. * 6+ years relevant application experience electric power systems, integration and automation, industry controls & protocols, network/communication systems. * Willing to travel domestically a minimum of 30% based on focus area. TRAVEL: * Up to 30% WORKING CONDITIONS: * General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning * Noise level is usually low to medium; it can be loud on the jobsite. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. * Occasional lifting of up to 30 lbs. * Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: Project Specialist II is responsible for designing, developing, and commissioning industrial and building control systems from concept through completion. This role includes determining system requirements, creating I/O maps, specifying hardware, and developing PLC and HMI software to meet functional and performance goals. The position supports projects through construction, testing, and final commissioning, while providing technical guidance to internal teams, customers, and sales. Ongoing responsibilities include troubleshooting complex control systems, producing technical documentation, supporting future system growth, and maintaining technical expertise through continuous professional development. Travel to customer sites and access to industrial machinery are required. Responsibilities: • Determine the design and performance parameters for control system applications., • Determine system I/O maps and help specify hardware to meet existing design requirements in addition to accommodation of potential future system growth., • Design automation, industrial, and critical environment controls system hardware and software., • Develop PLC and HMI software to meet the functional requirements of the system., • Support sales by visiting customer sites to support discussions related to the technical details of potential solutions., • Provide direction and support through the construction process., • Perform, oversee, assist, and sign off on final testing/commissioning of the completed systems., • Initiate final technical documentation for completed projects (As-Builts)., • Troubleshoot and debug PLC hardware and HMI/SCADA software., • Provide technical support and troubleshooting assistance for other technicians, customers, and sales teams., • Responsible for maintaining current technical, interpersonal, and communication skills through continuous education/development. (school, reading, seminars, industry group membership, etc.), • Work with Engineering/Design team to create Submittal and Panel Drawings., • Maintain clean driving record., • Must be able to access and inspect all areas of building control and industrial machinery., • Must be able travel for extended durations., • Other duties as assigned. Required Qualifications: • BS (Computer/Mechanical) Engineering or equivalent experience/training., • 3+ years of experience in mission critical or industrial environment., • 3+ years of experience in HVAC and/or building automation., • Knowledge of industrial and mobile PLC and HMI programming., • Working knowledge and experience with Ignition SCADA HMI, • Expert level knowledge of CodeSys (IEC 61131-3), RSLogix (AB), AVEVA (Wonderware) and CX-Programmer (Omron) programming languages., • Knowledge and proficiency in system data storage and transfer., • Proficient in Microsoft Office., • Excellent organizational skills and attention to detail., • Excellent written and verbal communication skills., • Excellent analytical problem-solving skills and attention to detail., • Clean driving record Preferred Qualifications: • 5+ years of experience in mission critical or industrial environment, • 5+ years of experience in HVAC and/or building automation, • MS (Computer/Mechanical) Engineering with 5 - 10+ years of related work experience, • Experience with BACnet and DDC systems/protocols/programming is a plus., • Ignition SCADA HMI certification(s) Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. While performing the duties of this job, the employee is regularly required to stand, climb, walk, sit, push, pull, squat, crawl, and stoop. The employee is regularly required to use hands to finger, handle, feel objects, and type on keyboard; reach with hands and arms; talk and hear. Specific vision abilities required by the job include close vision, distance vision, depth perception, and the ability to adjust focus. The use of power tools will be required to effectively perform this position. The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee will be exposed to outdoor weather conditions, work on job sites, may be required to travel to and from job site locations, may work in a typical office environment, and is occasionally exposed to construction equipment. The noise level in the work environment is usually moderate. Confined space entry may be required. High work may be required. Additional Information: Working Hours: This position generally works Monday- Friday, overtime and on call when necessary Benefits: • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description The Project Specialist Senior is responsible for designing, developing, and commissioning industrial and building control systems from concept through completion. This role includes determining system requirements, creating I/O maps, specifying hardware, and developing PLC and HMI software to achieve defined functional and performance objectives. The position supports projects throughout construction, testing, and final commissioning, while providing technical guidance to internal teams, customers, and sales. Ongoing responsibilities include troubleshooting complex control systems, producing technical documentation, supporting future system expansion, and maintaining technical expertise through continuous professional development. Travel to customer sites and access to industrial machinery are required. Key Responsibilities * Determine design and performance parameters for control system applications. * Develop system I/O maps and specify hardware to meet current design requirements and future scalability. * Design automation, industrial, and critical environment control system hardware and software. * Develop PLC and HMI software to meet system functional requirements. * Support sales teams by participating in customer site visits and technical solution discussions. * Provide technical direction and oversight throughout the construction process. * Perform, oversee, assist, and sign off on final system testing and commissioning. * Generate final technical documentation, including as-built drawings. * Troubleshoot and debug PLC hardware and HMI/SCADA software. * Provide technical support and troubleshooting assistance to technicians, customers, and sales teams. * Collaborate with Engineering/Design teams to develop submittals and panel drawings. * Maintain current technical knowledge through continuous education and professional development. * Maintain a clean driving record. * Access and inspect all areas of building control systems and industrial machinery as required. * Travel for extended durations when necessary. * Perform other duties as assigned. Required Qualifications * Bachelors degree in Computer Engineering, Mechanical Engineering, or related field (or equivalent experience/training). * 5+ years of experience in mission-critical or industrial environments. * 5+ years of experience in HVAC and/or Building Automation Systems (BAS). * Strong experience in industrial and mobile PLC and HMI programming. * Working knowledge and experience with Ignition SCADA HMI. * Experience with CodeSys (IEC 61131-3), RSLogix (Allen-Bradley), AVEVA (Wonderware), and CX-Programmer (Omron). * Knowledge of system data storage and data transfer processes. * Proficiency in Microsoft Office applications. * Excellent organizational, analytical, and problem-solving skills. * Strong written and verbal communication skills. * Clean driving record. Preferred Qualifications * 7+ years of experience in mission-critical or industrial environments. * 7+ years of experience in HVAC and/or Building Automation. * Masters degree in Computer or Mechanical Engineering with 5–10+ years of related experience. * Experience with BACnet and DDC systems, protocols, and programming. * Working knowledge of CX Alloy. * Ignition SCADA HMI certifications. Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance

Job DescriptionRole Overview We are seeking a senior‑level product leader to head Technical Product Management for Grid Control Room and T&D Automation & Control software solutions. This role will define product strategy, drive innovation, lead a high‑performing product team, and support technical sales efforts across the U.S. market. You will shape the future of grid automation, SCADA/ADMS/DERMS platforms, renewable integration, and next‑generation energy management systems. Key ResponsibilitiesProduct Strategy & Roadmap • Define and execute product vision for SCADA, ADMS, DERMS, Field Force Automation, Power Plant Controllers, and Hybrid Energy Management Systems, • Build multi‑year product roadmaps aligned with market trends, regulatory changes, and emerging technologies, • Ensure alignment between customer needs, business strategy, and engineering executionTeam Leadership, • Lead and mentor Technical Product Managers across multiple product lines, • Establish product frameworks including agile processes, lifecycle management, and go‑to‑market strategy, • Foster a culture of innovation, collaboration, and customer‑centricityProduct Development & Execution, • Prioritize features and enhancements for grid automation and control software, • Partner with engineering and delivery teams to ensure timely, high‑quality releases, • Drive adoption of cloud, AI/ML, and edge computing technologiesMarket & Customer Engagement, • Engage with utilities, regulators, and industry stakeholders to understand market needs, • Stay ahead of cybersecurity, interoperability, and grid modernization standards, • Support sales with product positioning, demos, competitive intelligence, and RFP responsesTechnical Sales Support (USA), • Serve as the technical liaison between product teams and U.S. sales, • Provide pre‑sales support, solution presentations, and customer engagement, • Translate customer feedback into product enhancementsFinancial & Business Impact, • Optimize pricing, licensing, and monetization models, • Define and track KPIs to measure product success and market adoptionRequired Qualifications, • 15+ years in Technical Product Management for T&D Automation & Control software, • Deep expertise in SCADA, ADMS, DERMS, Grid Automation, Protection & Control, and Grid Analytics, • Strong background in software development, cloud platforms, AI/ML, and edge computing, • Experience working with utilities, regulatory bodies, and grid modernization initiatives, • Knowledge of industry standards: IEC 61850, CIM, IEEE 2030.5, OpenFMB, NERC CIP, • Experience supporting technical sales or pre‑sales in the North American market, • Bachelor's degree required; Master's/MBA preferredPreferred Attributes, • Strategic thinker with strong execution discipline, • Excellent communication and stakeholder management skills, • Ability to lead and scale high‑performing product teams, • Strong customer empathy and market awareness

Job Description (Hybrid) Description: Are you ready for a challenge? Do you enjoy programming and working with electrical/mechanical systems? As an Automation Engineer, apply your programming skills and engineering knowledge to develop software solutions that interface with and control hardware. This role combines independent work with collaboration across teams and clients, involving daily communication, project management assistance, and building lasting business relationships. About DMC: DMC is a leading engineering consulting firm, delivering high-caliber engineering and custom software development services globally. Specializing in innovative solutions for manufacturing, testing, and product development, our expertise spans industries from aerospace to consumer-packaged goods to healthcare, and more. Our engineers excel in staying ahead of cutting-edge technologies and delivering top notch solutions. We prioritize technical excellence and cultivate a collaborative environment for independent and team-based work, reflecting our commitment to professional growth and providing forward-thinking solutions to clients. Responsibilities: Engineering Levels II & III (3-5+ years relevant experience) • Programs applications in accordance with DMC programming standards and best practices to meet and exceed customer requirements, • Commissions solutions at customer sites (domestic/international travel as needed), troubleshooting electrical and mechanical systems, • Works with most industrial PLC/HMI/SCADA platforms (Siemens, Rockwell, Ignition, etc.), • Continuously learns relevant technologies with guidance, gaining knowledge in sales, business development, and project processes, • Supports system architecture design, performs engineering tasks at all stages, and takes on both leading and supporting roles, • Mentors and technically advises new team members Must be authorized to work in the U.S. without employer sponsorship now or in the future. • Bachelor of Science in Mechanical, Electrical, or Computer Engineering (or related field), • Minimum GPA of 3.4, • Proficient in programming, including text-based languages and object-oriented concepts, • Quickly learns new technologies, understands complex systems, and builds on established patterns and models, • Efficiently manages multiple projects, works directly with customers, and responds to their needs, • Experience designing projects in industrial automation systems (e.g. PLCs, Motion Control, Process Control, HMI, SCADA, Robots, Machine Vision, etc.), • Strong written and verbal communication skills, with the ability to develop project proposals, • Engineer Levels II & III (3-5 years relevant experience): $95,000 - $115,000, • Benefits/Culture/Bonuses and More!, • Office Locations, • DMC Website, • Engineering Blogs, • Additional Career Opportunities #LI-Hybrid

Job Description NSI Engineering, a leading System Integrator, is actively seeking an Industrial Controls Engineer with hands-on experience in SCADA solutionsand PLC/HMI systems – mainly Rockwell Allen-Bradley. Experience with Schneider systems is a bonus. MUST have PLC/HMI experience. This is a role specifically for Controls Engineers. Applicants must be comfortable with a hybrid work setup (remote work from their home office when not on-site). This is NOT a software engineering position– we are seeking candidates with direct experience in controls, automation, and industrial systems. Why NSI Engineering? -Salary Range: $85,000 - $125,000 annually -Growth Opportunities: Regular reviews for salary increase and bonuses -Great Benefits: -401(k) with up to 4% employer match -Health insurance (50% of employee premium covered) -Paid time off -Flexible Work Setup: Hybrid remote work from home + on-site as required • Travel: 15% - 25% short trip travel (usually 4 days or less per trip) to other project sites (MN, WI, MI, ME, IA, TX, NC, CAN). About the Role As a Controls Engineer, you will work directly with SCADA solutions, PLC systems, HMI coordination, and a variety of industrial automation projects (such as airport baggage handling systems and manufacturing processes). The role requires hands-on engineering expertise in PLC upgrades, networking, and control system troubleshooting. Key Responsibilities -Perform PLC hardware/software upgrades (Rockwell Allen-Bradley focus) -Lead HMI coordination and integration with OEM systems Skills & Experience You’ll Bring -2-3 years of recent experience working with PLC/HMI systems (Rockwell Allen-Bradley required, Schneider is a plus) -Expertise in PLC software (Logix5000/Studio5000, ProWorx, Unity) -Familiarity with HMI packages (AVEVA/Wonderware, Ignition, FactoryTalk, etc.) -Experience with networking, server setup, and virtualization (Windows Server, VMWare) -Strong working knowledge of Excel for reporting and analysis Requirements -Location (remote): Within an easy commute to DFW airport. -Authorized to work in the US and able to pass a background check (for airport badging) -Reliable transportation and willingness to travel (15% - 25%) -Comfortable with air travel and occasional irregular hours (rare but some nights, no regular weekends) Proficiency in: -PLC Troubleshooting Skills -Industrial and Manufacturing Engineering -OSHA 10-Hour Certification (OSHA 10) -Troubleshooting Industrial Automation Equipment -Process Engineering -National Electrical Code (NEC) -PLC Programming Experience -SCADA Experience -Programming Machine Vision Systems Machines & technologies you may use: -HMI -Industrial Controls: PLCs (Allen Bradley, Siemens, Schneider Electric) -SCADA -RFID Systems -Variable Frequency Drives (VFD) -CAD Software -Conveyor Systems -Servo Motors You should be proficient in: • PLC Troubleshooting Skills, • Troubleshooting Industrial Automation Equipment, • Production Optimization, • PLC Programming Experience, • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Allen Bradley, Siemens, Schneider Electric, Modicon), • Vision System, • HMI

Job Description Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America’s energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children’s Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award-winning 12,000-strong organization as we fuel the world and each other! Summary: Energy Transfer is seeking a SCADA Specialist to perform real time SCADA system support and administration for a Pipeline SCADA system. This position interacts with Pipeline Control to ensure they can control and monitor pipelines safely and securely through SCADA HMI systems. The SCADA Specialist will work with Field Personnel on integrating RTUs and PLCs that are needed for real time data. Essential Duties and Responsibilities: • System Configuration and Administration., • Databases and Graphical Displays for Control Center Operations, • System interfaces, business data processes, and reporting., • Work with Field Personnel, CRM and the Control Center on projects to determine points that need to be brought back into the SCADA system when performing SCADA integration of field sites., • Participate in lineouts testing to meet regulatory requirements., • Work closely with Field Personnel to configure, test, and troubleshoot data polling from the SCADA System to remote PLCs and RTUs., • Work with the pipeline controllers to make sure the SCADA application is always providing them the ability to operate the pipeline safely., • Provide 24x7 support to the Control Center on a rotational basis, • Document changes, obtain required approvals, and submit changes, • Other duties as required Requirements: Education and/or Experience, Knowledge, Skills & Abilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The requirements for this position are listed below: • Bachelor's degree in Computer Science, Engineering, or equivalent. Experience will be considered in lieu of a degree., • 2-5 years of experience with SCADA systems., • CygNet SCADA experience is a plus, but other Automation, EFM Collection, or SCADA Systems experience will be considered., • Gas, and/or Liquids pipeline experience preferred with a working knowledge of measurement technologies, process control automation, device protocols, networking, and telecommunications., • Strong problem solving, technical, and functional skills with the ability to multi-task., • Experience working with the Windows operating system and server administration., • Must be able to follow controlled procedures, adhere to database and display standards and change management procedures., • Must possess strong interpersonal and communication skills (verbal and written)., • Independently prioritize work to handle multiple concurrent projects to achieve results., • The IT Specialist level requires a Bachelor's degree or equivalent experience and 2-5 years of relevant job related experience, • The Senior IT Specialist level requires a Bachelor’s degree or equivalent experience and 5-8 years of relevant job related experience, • A working knowledge of real-time systems, particularly SCADA systems or PLCs and RTUs is preferred., • Solid Microsoft skills with an emphasis in advanced Excel. Pluses include; SQL and Microsoft development tools .Net and Visual Studio., • A basic understanding of pipeline hydraulics., • A basic understanding of PLC and RTU communication protocols and TCP/ IP communications., • CygNet SCADA application with remote site integration experience., • Familiarity with PHMSA Control Room Management (CRM) processes and guidelines. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. • Usually, normal office working conditions., • Must be able to remain in a stationary position 50% of the time due to prolonged periods of sitting or standing., • Occasional overnight travel may be required., • Occasional visits to industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment. An equal opportunity employer/disability/vet Energy Transfer is an equal opportunity employer and does not discriminate against qualified applicants on the basis of actual or perceived race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by law. The nature and frequency of the above working conditions and requirements may vary depending on individual operational circumstances. Where feasible, the Partnership will make reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of the job. DISCLAIMER: The statements listed in this job posting, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. #LI-CK1

Job Description Controls Engineering Manager needed within the Dallas, TX area. This Engineering Manager should have experience within the Food and Beverage, Oil & Gas, or aerospace industries. This company is a control systems integration firm with offices in SoCal and Orlando. Why work here? • Established growing company with proven success and excited to grow, • Remote role - must be in the Dallas area, • Help build an engineering team from the ground up!, • Full benefits!, • Base salary + variable compensation on sales commissions, • Manage and grow sales in your territory through direct customer interaction, • Identify and land new accounts while maintaining key relationships, • Develop pricing and proposals for electrical, control, and automation projects, • Select the appropriate bill of material for hardware, • Estimate engineering hours, • Create scope of work documents, • Engineer, design, manage, and implement controls projects, • Track project costs to meet budget, • Develop and manage a detailed project schedule and work plan, • Assign tasks and communicate expectations to engineers, suppliers, distributors, and customers, • Provide value to customers by understanding their industry specific challenges and providing automation expertise, • Troubleshoot issues with existing automation systems (VFDs, Motion, PLCs, Sensors, Motors, etc.), • 5 or more years of experience as a control system integrator, • Bachelor's degree in engineering, • 3 years of project management experience, • Excellent verbal and written communication skills, • Ability to read and redline electrical schematics, • Hands on experience with low voltage (480V and below) electrical applications, • Functional machine safety experience (preference will be given to TUV certification), • Extensive experience with the following Automation Disciplines, • PLC Programming / HMI Development / Variable Frequency Drives / Motion Control / Industrial Networks / SCADA systems, • Ability to develop and grow strong customer relationships To comply with some state laws, the annual base salary range for this position has been provided. The range given is broad and should be considered as a guideline only. Our client will consider a candidate's work experience, education/training, key skills, the salaries of current employees in similar roles, and other factors when extending an offer.

Job DescriptionControls Engineer Controls Engineer Location: Onsite in Dallas, TX Salary: $100-140k DOE Position Overview We are seeking a skilled Controls Engineer to design, develop, and implement control systems for our automation projects. The ideal candidate will have a strong background in PLC programming, HMI development, and panel design, ensuring our systems meet operational efficiency and safety standards. Key Responsibilities • Design and develop control systems using PLCs, HMIs, and other automation technologies., • Create and review electrical schematics and P&ID diagrams for control systems., • Conduct panel design and layout to ensure compliance with UL standards., • Collaborate with cross-functional teams to integrate control systems with existing machinery., • Program and configure SCADA systems for monitoring and control purposes., • Utilize SolidWorks and AutoCAD for designing and modeling control panels and systems., • Conduct testing and troubleshooting of control systems to ensure optimal performance., • Bachelor's degree in Electrical Engineering, Automation Engineering, or a related field., • Proven experience as a Controls Engineer or similar role in automation and control systems design., • Proficiency in PLC programming, particularly with Allen Bradley and Siemens platforms., • Experience with HMI development and SCADA systems., • Familiarity with UL standards and P&ID documentation., • Strong skills in AutoCAD and SolidWorks for design work., • Experience with wastewater or water treatment is nice to have but not required., • Knowledge of ISA data standards and practices., • Medical, dental and vision insurance, • Paid time off, • Paid company holidays, • 401k with company match, • Disability insurance, • Tuition reimbursement, • Life insurance, • Commuter expense - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 03/24/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description This engineering firm has been in business for over 40 years! The key to their longevity and success is due to the depth of their experienced and talented engineers. Control Engineering has recognized them as one of the Top Ten System Integrator Giants. With over 35 offices across the USA, you will work onsite in the Dallas Metro area. Reasons to work for this company: -Take on PM responsibilities about 30% of the time and technical engineering 70% of the time. -Opportunity to get involved with challenging projects across many different industries-Comprehensive medical/dental insurance -401K match and Employee Stock Ownership Plan -They have a great reputation in the industry and with their customers Position summary: You will lead the design, implementation, and project management of large-scale capital automation projects within the Life Sciences industry. This role requires proficiency with Emerson DeltaV systems and a strong technical background in designing and delivering cGMP-compliant automation solutions. The ideal candidate will have a proven track record of managing complete project life cycles, ensuring compliance with industry regulations, and collaborating with cross-functional teams to deliver a complete DeltaV solution. Minimum Qualifications: • 8+ years of experience as a Controls Engineer using Emerson DeltaV systems, focusing on system design and project execution, • Experience with DCS hardware/software platforms (Emerson DeltaV is preferred or similar), • Proficiency in DeltaV Live and DeltaV Operate, including experience designing high-performance HMIs and operator interfaces, • Expertise in ISA-101 HMI design principles and high-performance graphic design strategies, • Strong experience in class-based configuration and design, • Expertise in ISA-88 batch processing, historian solutions, and advanced control strategies, • Proven experience managing large-scale capital projects in the Life Sciences industry, • Strong knowledge of automation protocols (HART, Foundation Fieldbus, Profibus, Modbus TCP/IP, Ethernet/IP, OPC UA, IO-Link), • Deep understanding of industrial networking for communication between controllers, servers, and HMIs, • Strong knowledge of cGMP, GAMP5, and regulatory compliance for biopharmaceutical manufacturing, • Experience integrating electrical and process control systems, • Strong leadership, organizational, and communication skills for cross-functional collaboration, • Experience specifying and designing electrical components, including MCCs, VFDs, control panels, and power distribution systems, • Knowledge of server infrastructure and virtualization technologies for robust DeltaV system deployment, • Extensive experience designing and implementing batch control systems within regulated Life Sciences environments, • Experience in OEM system integration using OPC UA, Ethernet/IP, and other industrial communication protocols, • Ability to plan, specify, and manage DeltaV system licensing to optimize project implementation

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Pearce is seeking a well-qualified Field Engineer–Wind MCE. This key role will be responsible for assisting with all accounts within the Wind MCE business unit while also developing new business and partnerships nationally, with a market focus on MCE work and small corrective repairs. The Field Engineer will work closely with existing Pearce customers and internal teams to grow our revenue and expand our service offerings and key target companies. The Field Engineer will also identify, qualify, and develop repairs for potential customers and partners, and work with those partners to enable our services and solutions to fit their needs. This person will work closely with Marketing, Operations, and Senior Executive teams to ensure accurate and consistent messaging. S/he will combine solid hunter/sales skills, business acumen, leadership ability, technical knowledge, process management, and operational excellence to guide the growth of the business. Core Responsibilities: • Required to supervise field work onsite focusing on Safety, Quality, and Efficiency, • Support lifting operations of equipment at heights over 250', • Required to coach/conduct team members on rigging applications/inspections, • Coach/conduct safe and efficient repairs to all Wind Turbine electrical systems, • Detailed knowledge and skill in generators, converters, controllers, and electrical equipment, • Coach/train personnel on how to perform proper isolation of electrical components (LOTO), • Ability to read and interpret schematics by various Wind Turbine manufacturers Core Experience • Minimum of 10 YEARS direct product experience on one or more platforms, • Ability to read and interpret schematics by various Wind Turbine manufacturers, • Proficient in using dial calipers, fluke meters, and all other tools used on WTG, • Experience with SCADA and other monitoring tools for WTG, • Attention to detail and safety focused, • Travel up to 75% of the time, • Work at heights (over 250'), • Prolong standing / and working in ergonomic challenging positions, • Varied climates based upon locations Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job DescriptionDescription: The Slate River Systems’ Senior Controls Systems Engineer will design and implement MHE controls systems. These systems vary in complexity and scope and may include, but are not limited to: Pallet Conveyor, Case Conveyor, Sortation, ASRS and AGVs control, and may interface with Warehouse Control Systems (WCS), Robot Control Systems (RCS), Traffic Management Programs, Supervisory Control and Data Acquisition systems (SCADA). DUTIES AND RESPONSIBILITIES: • Develop standard controls hardware offerings as listed below but not limited to Standard Electrical Drawing Sets; Control Cabinets; Field Enclosures; Scanners, Scales, Profilers; Vision systems; Industrial Ethernet and Machine Communications; and Power Distribution., • Assist Project Engineering with Pre-Sales Support; Lead Hardware and Software Tech reviews; Hardware Design, PLC Software, SCADA Design and Emulation; Field Commissioning; and Final Acceptance. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requirements: QUALIFICATIONS – EDUCATION AND/OR TRAINING: • Bachelor’s degree in electrical, or related field with industry experience in controls engineering. EXPERIENCE: • 5+ Years of controls engineering experience directly related to material handling (Case/Poly Conveyor, Sortation Systems, Pallet Conveyor, AGVs, ASRS), • Must have experience with communication to WCS systems, • Experience with Emulation packages such as Emulate3D, • Experience with Industrial Ethernet Applications, • Experience with Power distribution, FLA Calculations, and Efficiency Calculations, • Experience working with cross disciplinary project teams, • Experience with Designing Control Systems and hardware following NFPA and UL, • Experience with Safety Standard such as ISO13849 GENERAL SKILLS: • Ability to travel at least 50% of the time., • Proficient in AutoDesk applications, mainly AutoCAD., • Demonstrable strong expertise with PLC programing in Rockwell Studio 5000 and the ability to work with other PLC platforms such as CodeSys and Siemens.

Job Description Texas-based statewide systems integration company seeks an controls automation engineer/technician for municipal water/wastewater Supervisory Control and Data Acquisition (SCADA) Systems, electrical, instrumentation, and controls projects throughout Texas. Services include design, project management, PLC & HMI programming, deployment, testing, and commissioning with some service and technical support for existing customers in the SCADA industry. Duties: • Corporate liaison for local water/wastewater utilities on needs for system upgrades, service, and project support, • Provides system programming and completes acceptance tests., • Maintains systems by problem-solving, testing, diagnosing problems, and completing repairs on electronic control panels, radio communication devices, computer systems and networks, and software., • Maintains records by documenting original system, upgrades, and repairs; completes work orders for invoicing by central office. Complete project management documentation., • Complies with regulations by adhering to codes, specifications, and rules; reads blueprints and technical bulletins., • Keeps company-provided installation & service equipment and vehicles operating by following operating instructions to meet job duty requirements., • Updates job knowledge by completing re-certification, participating in educational opportunities, and reading technical publications., • Customer service orientation, professionalism, exemplary ethical conduct, technical understanding, system administration, problem-solving, communications, • Must be mature, dependable, and thorough, • Experience with any SCADA applications and HMI software (Ignition, VTScada, Wonderware, and iFix)., • Experienced with Allen-Bradley, Modicon, SCADAPack, Siemens, and GE PLCs. Excellent references, excellent driving record; electrical experience desired Benefits: • Per Diem paid for overnight travel, • Major medical for employees and dependents (100%) for base plan, • 3% 401k employer contribution after 1 year, • Health savings account, • Paid time off, • Full Time

Job Description About USA Compression USA Compression Partners, LP, (NYSE: USAC) provides mission-critical natural gas compression services to large upstream and midstream energy companies. We are an operations-centric, technology-driven employer with 1,000+ employees in 18 states across the US. We owe our success to the quality of our employees, our strong commitment to safety, and our superior service to our customers. Overview The Operations Analytics Leader leads a small team responsible for delivering high‐quality operational analytics, reporting, and process improvements across operations. This role combines hands‐on analytical work with day‐to‐day team leadership, ensuring reliable data, actionable insights, and strong alignment with Operations leadership. Databricks expertise is essential. Key Responsibilities Team Leadership & Oversight • Lead and mentor a team of analysts supporting field operations, logistics, and executive decision-making., • Prioritize workload, assign tasks, and ensure timely delivery of reports, dashboards, and analysis., • Hands on development and maintenance of Databricks notebooks, data pipelines, and operational models., • Support the creation of digestible dashboards and KPIs that support throughput optimization, asset reliability, and regulatory reporting. · Understand the organization's business strategy and operations to ensure platform capabilities support business objectives. • Support initiatives related to artificial intelligence, digital transformation, automation, and workflow standardization., • Serve as a key point of contact for operations leadership regarding analytics priorities and reporting needs., • Translate business requirements into technical specifications and ensure alignment across teams., • Provide training and support to end-users to ensure successful implementation and utilization of operational dashboards. Required Qualifications • 8+ years of experience in operations analytics, or similar roles, for mid-to-large organizations., • 4+ years of experience leading or mentoring analysts (formal or informal)., • Strong hands‐on experience with Databricks, SQL, and data modeling., • Proficiency with BI tools (Power BI, Spotfire, Tableau)., • Experience within midstream, energy, or industrial operations., • Understanding of compression or midstream operational workflows (SCADA data, maintenance planning, or scheduling)., • Familiarity with Azure or other cloud data platforms. An equal opportunity employer/disability/vet Energy Transfer is an equal opportunity employer and does not discriminate against qualified applicants on the basis of actual or perceived race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by law. The nature and frequency of the above working conditions and requirements may vary depending on individual operational circumstances. Where feasible, the Partnership will make reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of the job. DISCLAIMER: The statements listed in this job posting, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

Job Description Overview The Operations Analytics Leader leads a small team responsible for delivering high‑quality operational analytics, reporting, and process improvements across operations. This role combines hands‑on analytical work with day‑to‑day team leadership, ensuring reliable data, actionable insights, and strong alignment with Operations leadership. Databricks expertise is essential. Key Responsibilities Team Leadership & Oversight • Lead and mentor a team of analysts supporting field operations, logistics, and executive decision-making., • Prioritize workload, assign tasks, and ensure timely delivery of reports, dashboards, and analysis., • Hands-on development and maintenance of Databricks notebooks, data pipelines, and operational models., • Support the creation of digestible dashboards and KPIs that support throughput optimization, asset reliability, and regulatory reporting. · Understand the organization's business strategy and operations to ensure platform capabilities support business objectives. • Support initiatives related to artificial intelligence, digital transformation, automation, and workflow standardization., • Serve as a key point of contact for operations leadership regarding analytics priorities and reporting needs., • Translate business requirements into technical specifications and ensure alignment across teams., • 8+ years of experience in operations analytics, or similar roles, for mid-to-large organizations., • 4+ years of experience leading or mentoring analysts (formal or informal)., • Strong hands‑on experience with Databricks, SQL, and data modeling., • Proficiency with BI tools (Power BI, Spotfire, Tableau)., • Experience within midstream, energy, or industrial operations., • Understanding of compression or midstream operational workflows (SCADA data, maintenance planning, or scheduling). The nature and frequency of the above working conditions and requirements may vary depending on individual operational circumstances. Where feasible, the Partnership will make reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of the job. DISCLAIMER: The statements listed in this job posting, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified.

Job Description Role Overview: The Energy Optimization Associate is an entry-level to early-career position designed to support Applied Digital’s Energy Optimization Team through reporting, analytics, operational support, and data quality management. This role helps ensure accurate market intelligence, data flow, and documentation to enable real-time decision-making. This is a foundational role with a clear growth path into Real-Time Scheduling, Curtailment Operations, Market Forecasting, or Optimization Analytics. The ideal candidate is curious, analytical, detail-oriented, and eager to learn power market dynamics, industrial load behavior, and curtailment strategy. Candidates with backgrounds in utility operations support, engineering technology, energy analytics, industrial operations, or technical data roles are strong fits, as are high-potential candidates with strong quantitative or operational aptitude. Key Responsibilities: Operational Support & Reporting • Compile daily operational reports summarizing price curves, curtailment events, operational status, and identified risk factors., • Maintain optimization logs, data repositories, and documentation for real-time and day-ahead activities., • Support Schedulers and Analysts by preparing datasets, charts, and summaries for morning and evening volatility windows., • Track key KPIs including forecast accuracy, response time, savings performance, and execution compliance. Data Management & Quality Assurance • Perform data validation checks on SCADA inputs, market price feeds, and internal dashboards., • Support reconciliation of curtailment events with settlement data and utility billing., • Maintain historical archives of prices, load patterns, weather impacts, and operational adjustments. Market & System Monitoring • Monitor market notifications, outage advisories, weather alerts, and system operator bulletins., • Provide early-warning flags to the team when conditions indicate potential volatility., • Assist in documenting real-time issues or anomalies for post-event review. Cross-Functional Coordination • Collaborate with Operations, Engineering, and Site Leadership to collect operational metrics and contextual data., • Help communicate upcoming volatility windows or operational changes to Operators., • Assist with preparation for leadership briefings and performance reviews. Growth & Skill Development • Participate in structured training covering LMP fundamentals, curtailment strategy, grid operations, and forecasting basics., • Shadow Real-Time Schedulers during morning and evening peaks., • Take on increasingly complex tasks including basic modeling, forecasting, or intraday analysis as skills develop. Required Qualifications: • 0–3 years of experience in:, • Energy operations support, • Utility or industrial operations, • Technical analysis or reporting roles, • Engineering or quantitative support functions, • Strong analytical and critical-thinking skills., • Proficiency in Excel/Google Sheets; ability to work with structured datasets., • Strong communication, documentation, and organizational skills., • Demonstrated ability to learn quickly in a fast-paced environment. Preferred Qualifications: • Exposure to power markets, grid operations, or SCADA systems., • Experience with Python, SQL, Power BI, Tableau, or other analytic tools., • Degree in engineering, economics, mathematics, energy systems, or related field., • Prior experience supporting industrial loads, utilities, or operational teams.

Seeking a SCADA Specialist to perform real-time SCADA system support and administration for a Pipeline SCADA system. Work with Field Personnel, CRM, and the Control Center on projects to determine points that need to be brought back into the SCADA system when performing SCADA integration of field si

If finding an effective fix and supporting customers with the highest level of service standards sounds appealing to you, Canon USA, a leader in technology, solutions, and services, wants to know your story.We’re actively seeking a Field Service Technician to deliver amazing experiences and elevat

Our client is a leading provider of innovative, high-capacity oil management and crumb recovery systems, based in the Dallas-Fort Worth area.The company offers a proprietary, patented, hot food oil filtration system built specifically for commercial fryers.They have an exciting opportunity for a tal

Design and develop electrical systems for the integration of electronic equipment on military/commercial aircraft and ground stations.The design includes creating system wiring diagrams using the Capital Harness System tool as well as circuit breaker panels, control panels and other items using Comp

Growing construction Company in the Fort Worth area is needing to add to the Project Management Team.They are needing a Traveling Project Manager with strong Construction Management experience and open to travel outside of the DFW area for projects.Job Description: This Project Manager will handle a

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates.No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT.Commercial Con

L3Harris is seeking qualified individuals to join our Aeronautical Systems Engineering team as an Electrical Design Engineer for ISR & Special Mission Programs.In this role, you will lead and develop electrical power systems for the integration of electrical/electronic equipment on the aircraft syst

Want to build a brighter, bolder future and cultivate your career? Join Ecolab’s team and help create a world in which we all thrive.Nalco Water, an Ecolab company, helps customers conserve more than 161 billion gallons of water annually.We serve industries from food & beverage to mining and manuf

Do you have a demonstrated ability to drive process improvement and lead change? Penske Logistics is seeking a proven leader with relevant experience and skills to join our team of logistics professionals.We are seeking a candidate to provide leadership at one of our warehousing operations.The Opera

Apartment Maintenance Technician – Contract & Contract‑to‑Hire Location: Dallas, TX Pay: $20–21/hour Looking for steady maintenance work with flexibility? BG Staffing is hiring experienced Apartment Maintenance Technicians for contract and contract‑to‑hire roles across multifamily commun

Maintain, repair and service facility systems.Performs skilled maintenance and repair services of facility systems such as mechanical, electrical, and building systems.Interpret blueprints and schematics; implement methods, practices, and techniques of maintaining building and facilities to identify