Scada jobs in Tampa, FloridaCreate job alerts

Job DescriptionSeeking an experienced Transformer Assembly Oversite Technician for direct hire, long-term roles with one of the fastest-growing industrial electrical service contractors in the nation, known for delivering high-quality transformer maintenance, electrical testing, electrical construction and distribution system solutions with HQ in Tampa, FL. This is a National full-time travel position. If you’re passionate about electrical systems and want to be part of a team that values your expertise, this is the role for you! Pay: $65/h-$85/h depending on experience. Benefits: Yearly bonus, Comprehensive Employee Benefits: 401k, Medical, dental, Vision insurance, PTO and more! Travel: Primarily across Florida State. All expenses are paid and per diem is available! If applicable, there is vehicle allowance, and gas card Responsibilities for Transformer Assembly Oversite Technician • Oversee field assembly of power transformers, ensuring adherence to OEM manuals, drawings, torque charts, and work instructions., • Verify critical steps: tank inspection, core/coil handling, tap changer installation and alignment, bushing assembly, gasket prep and sealing, conservator/radiators/fans/pumps installation, oil processing/vacuum dry out, and final checks., • Witness and document hold points, inspections, and tests per ITP/QCP (Inspection & Test Plan / Quality Control Plan)., • Review and validate manufacturer’s specifications, drawings (GA, wiring diagrams, schematics), and field change notices before execution., • Maintain daily reports, photo records, punch lists, non conformance reports (NCRs), and corrective actions., • Confirm torque values, clearances, and alignment meet specification; verify material certificates, serial numbers, and BOM traceability., • Ensure proper cleanliness, moisture control, and contamination prevention practices throughout assembly., • Witness field tests (as required): insulation resistance, turns ratio (TTR), winding resistance, power factor/DDF, excitation current, SFRA, CT polarity and ratio, and functional checks of OLTC controls/auxiliaries., • Transformer components (core/coil, windings, OLTC/DETC, bushings, conservator, radiators, cooling systems, gauges/relays, CTs/PTs), assembly sequencing, cleanliness and moisture control., • Oil handling (vacuum fill, degasification, dehydration), leak prevention, gasket selection/prep, torque practices., • Experience: 5+ years hands- on experience with transformer assembly (medium/large power transformers preferred; distribution transformer experience considered if assembly responsibilities were significant)., • Exposure to NDT basics (e.g., leak detection, dye penetrant on weld repairs—witness level)., • Experience with CMMS or quality systems (e.g., NCR/CAPA workflows)., • Basic familiarity with SCADA/relay interfaces for auxiliaries and controls (witnessing and point-to- to point checks)., • Certifications: OSHA 10/30, NFPA 70E training, Rigging/Signaling, First Aid/CPR. Feel free to text “Transformer” to 321-418-6672 for faster response. INDH Powered by JazzHR UkgRwKoS87

Job DescriptionRocha Controls is a full-service company specializing in supervisory control and data acquisition (SCADA) systems, computer networks, programmable logic controller (PLC) systems, telemetry, instrumentation, and variable frequency drive and motor control center installations. We are seeking a self-motivated and effective SCADA ProgrammerDesign and Program:Develop control logic for PLCs, which act as the "brains" of industrial machinery, using languages like ladder logic, function block diagrams, and structured text (as defined by IEC 61131-3). • Configure and Develop HMIs:Create Human-Machine Interfaces (HMIs) within SCADA systems for operators to visualize process data, control equipment, and manage alarms., • Integrate Systems:Work with SCADA software to consolidate controls, collect real-time data from PLCs and sensors, and integrate these components into a cohesive industrial automation solution., • Troubleshoot and Maintain:Diagnose and resolve issues within control systems, ensuring the continuous and efficient operation of automated industrial processes., • Collaborate and Document:Work with other engineering teams to define project requirements and document system configurations, including wiring diagrams and PLC logic. Job Posted by ApplicantPro

Job DescriptionDescription: Seven Seas Water Group Seven Seas Water Group () is a portfolio company owned by investment funds managed by EQT. Headquartered in Tampa, with operations across the U.S., Caribbean, and Latin America, Seven Seas Water Group (SSWG) delivers annually over 20 billion gallons of water to industrial, commercial, governmental, municipal, and hospitality customers. SSWG designs, builds, owns, and operates, delivers new facilities, or acquires and upgrades existing facilities, with the goal of optimizing project risk transfer between the public and private sectors. We have more than 200 water and wastewater treatment plants in operations throughout the United States, Caribbean, and Latin America. With an outstanding reputation for decentralized water and wastewater treatment solutions, the SSWG “Water-as-a-Service®” approach seeks to help solve global water and wastewater infrastructure challenges. SSWG operates two businesses within the water infrastructure space. Seven Seas Water, which provides water treatment and desalination for governmental, hospitality and industrial customers in United States, Latin America and the Caribbean, and the AUC Group (), which provides decentralized water and wastewater treatment plants for industrial and municipal customers in the United States. EQT is a purpose-driven global investment organization focused on active ownership strategies. With a Nordic heritage and a global mindset, EQT has a track record of more than three decades of developing companies across multiple geographies, sectors, and strategies. EQT has investment strategies covering all phases of a business’ development, from start-up to maturity. EQT has EUR 273 billion in total assets under management (EUR 141 billion in fee-generating assets under management) as of 30 June 2025, within two business segments – Private Capital and Real Assets. With its roots in the Wallenberg family’s entrepreneurial mindset and philosophy of long-term ownership, EQT is guided by a set of strong values and a distinct corporate culture. EQT manages and advises funds and vehicles that invest across the world with the mission to future-proof companies, generate attractive returns and make a positive impact with everything EQT does. The EQT AB Group comprises EQT AB (publ) and its direct and indirect subsidiaries, which include general partners and fund managers of EQT funds as well as entities advising EQT funds. EQT has offices in more than 25 countries across Europe, Asia and the Americas and has more than 1,900 employees. Seven Seas Water Group is a portfolio company of EQT AB (together with its subsidiaries, "EQT"), a purpose-driven global investment organization that partners with companies worldwide through its Private Capital and Real Assets strategies. Founded in 1994, EQT is a leading active ownership firm that has more than EUR 273 billion in total assets under management across nearly 50 active funds. EQT is committed to investing behind essential infrastructure, partnering with established platforms that deliver sustainable, mission critical services aligned with global needs for resource efficiency. More info: Follow EQT on LinkedIn, X, YouTube and Instagram Job Summary The Senior Project Engineer is accountable for all aspects of engineering necessary to deliver water treatment systems (primarily Reverse Osmosis systems treating seawater and brackish water) to be operated by Seven Seas Water (Operations Group) on a long term basis delivering water to municipal and industrial customers. The Project Engineer has ownership of all engineering activities necessary to delivery turn key solutions on green field and brown field sites. This includes in house engineering, 3D design, I&C engineering, full SCADA development, and 3rd party engineering subcontracts for civil, structural, building, permitting, etc. as needed to support the turn key project delivery. Requirements: Essential Duties and Responsibilities include the following: · Act as the lead engineer for assigned projects; support the project manager in execution of engineering project deliverables. Liaise with project team and customer in delivering the project. · Take ownership of the P&ID’s and the Integration of the project across all disciplines to ensure a consistent design across all disciplines and documentation. · Prepare engineering documents within specified dates, such as P&ID (Piping and Instrument Diagram), foundation loading charts, valves list, rotating equipment (pumps, blower etc.) data sheets, static equipment data sheets (storage tank, pressure vessels) heat exchanger data sheet, paint and lining matrix, piping and valve specs. · Prepare Material Purchase Specifications (MPS) for equipment, valves, instruments, vessels, piping, paint, lining, etc. along with review and release of technical bid evaluations (TBE’s) for the packages. After the PO, review and approve supplier submittals as needed to ensure compliance with on schedule execution. · Coordinate heavily with 3D Plant Design Team to complete 3D Plant Design of new water treatment facilities. The Project Engineer will not do CADD work, but is responsible for delivering annotated construction drawings of high quality to deliver a safe, operable, and efficient plant design. · Facilitate HAZOP and Plant Design Reviews for new plants built by the company. · Maintain detailed BOMs into company ERP system (IFS) and issue purchase requisitions using ERP system. · Direct and approve the work of mechanical AutoCAD designers completing mechanical and process drawings. · As required, assist Business Development with costing on new plants proposed by the company. · Assist in the completion of operational procedures for new plants built by the company. Qualification/Requirements: · Strong technical knowledge of seawater and brackish water reverse osmosis technology and applications, domestic and industrial wastewater treatment technologies, and related water industry technologies, trends, and standards · Expert in the reading and interpretation of mechanical drawings such as P&IDs, PFDs, and GA’s. · Proficient in the use of standard business software such as Microsoft Word/Excel/PowerPoint. · Proficient in the use of MS Visio and/or AutoCAD design software preferred. · Must be able to direct design personnel. · Must have solid mechanical engineering skills. · Process design skills are a plus. · English fluency required; Spanish speaking ability is strongly preferred, or multi-lingual skills are highly desired. · Ability to work hybrid schedule (multiple days per week in Tampa office) required. · Ability to travel 10-20% internationally as well as in the U.S. · PE License is highly desired. · PMP certification is a plus. Education/Experience: · Minimum of a bachelor’s degree in an engineering discipline required. Chemical or Mechanical Engineering Degree preferred. · 5-10 yrs minimum professional work experience highly preferred. · Relevant experience in the water treatment industry, to include experience with reverse-osmosis system design; sea water reverse osmosis (SWRO) experience highly preferred. · Candidate must have mechanical design experience of various piping materials including PVC, stainless steel, and FRP. Must also have experience with design of mechanical support systems for piping, valves, pumps, and instrumentation. · Candidate must be experienced with all facets of project execution with primary focus on detailed engineering of reverse osmosis and related process equipment design. How to Apply Candidates must apply through our website, or by sending resumes to . We recognize that our people are our strength and the diverse talents they bring to our global workforce are directly linked to our success. We are an equal opportunity employer and place a high value on diversity and inclusion at our company. We do not discriminate on the basis of any protected attribute, including race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, marital or veteran status, pregnancy or disability, or any other basis protected under applicable law. In accordance with applicable law, we make reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as any mental health or physical disability needs. Equal Opportunity Employer/Disability/Veterans. Applicant will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.

Job DescriptionSalary: Job Description ELUTIONS is a global provider of Operational Business Intelligence and AI-driven solutions that optimize a broad range of operational performance and business practicesincluding, but not limited to, resource efficiency and energy consumption, production, asset health and performance, and commercial and logistics operationsacross asset-intensive industries, such as chemical, LNG, refining, manufacturing, and logistics sectors. With over 30 years of experience evolving from industrial automation and controls into advanced AI analytics, Elutions enables organizations to convert operational data into actionable insights that drive measurable business outcomes. At Elutions, engineers work closely with real operational systems and data, gaining hands-on experience in applying analytics to complex, asset-intensive environments. Team members are encouraged to continuously develop their technical and domain expertise while contributing to solutions that deliver measurable operational and business impact. The Engineering Team is seeking a motivated Domain Engineer with the ability to integrate optimization strategies into real-world applications through commissioning data analytics and implementation. This position is primarily in-person with intermittent travel. Both entry- and mid-level applicants are encouraged to apply, as on-the-job training and mentorship are provided to support professional growth and technical development. Entry Level Candidates are Encouraged to Apply!!! General Responsibilities: • Conduct research, data analytics, and prepare technical and performance reports., • Develop an understanding of industrial process systems and operations, including (but not limited to) fluid mechanics, pumping systems, energy systems, wastewater treatment, desalination, and process operations across chemical, petroleum, LNG, and refinery sites., • Analyze large operational datasets and apply data analytics and data-mining concepts to identify patterns, anomalies, and optimization opportunities., • Read and understand asset performance curves and equipment specifications., • Learn and implement technical hardware/software solutions for monitoring, analytics, and optimization., • Apply data pattern recognition techniques and energy optimization methodologies to support operational improvement initiatives., • Visualize data findings through dashboards including UI/UX design, • Provide second-tier customer support for deployed analytics and optimization solutions., • Support customer engagement activities, including training sessions, software demonstrations, technical presentations, and any additional support., • Have effective interpersonal skills, organization/prioritization and administrative skills, • Field travel as needed to perform site surveys, equipment installation/commissioning, and field support activities. Requirements: • Masters degree or Bachelors degree in either Mechanical Engineering, Chemical Engineering, Petroleum Engineering, Electrical Engineering, or Industrial Engineering disciplines. Other high-level science or mathematics-based degrees will also be considered., • Proficiency in Microsoft Excel for data analysis (formulas, pivot tables, charts)., • Working knowledge of Python or a similar scripting language for data analysis., • Basic understanding of data analytics and statistics, including trend analysis and anomaly detection., • Ability to interpret process diagrams and technical documentation (PFDs, P&IDs, equipment data)., • Exposure to industrial or operational data systems (e.g., historians, DCS/SCADA) is preferred. Motivational Fit: The successful candidate will have the following attributes: • Strong written and verbal communication skills, particularly when collaborating with distributed or cross-functional teams., • Ability to plan, organize, and prioritize work effectively across multiple tasks and timelines., • Analytical and creative problem-solving skills, with a willingness to investigate complex technical challenges., • Proactive mindset with the ability to take initiative and follow through on assignments., • Flexibility and adaptability when working in dynamic technical and operational environments., • Collaborative, team-oriented approach with a strong sense of accountability., • High level of motivation and interest in continuous learning and professional development.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Growing Ocala, FL based, publicly traded construction company is looking for a LEAD relay technician (with 10+ years of experience) and a SENIOR relay technician (with 7+ years of experience.) The ideal candidate will be able to: Apply / exhibit a high attention to detail with regard to safety and human performance. Conduct thorough prejob briefings at the beginning of each workday, and as needed throughout the day as conditions warrant. Perform relay panel risk assessments daily and apply human performance barriers as needed. Develop functional guidelines with an emphasis on human performance principles. Relay Technicians must garner and maintain NERC certifications for access into NERC CIP control houses. Maintain and control proper use of Duke Energy issued TCA secure laptop. Review construction prints, make corrections as needed, confirm schemes will function properly. Work with Duke Energy RCE and RCI and the Relay Design Engineering to resolve any problems with the protection and control schemes. Apply approved LV control cable and fiber optic safe work practices. Review all protective relay settings as issued. Working with RCE, RCI and the Relay Settings Engineer to resolve all problems with the relay logic and protection settings. Review the SCADA point assignment sheet as issued by the Energy Control Center. Work with the Senior Engineering Technical Support Specialist to resolve any conflicts between the relay logic settings and the RTU (remote terminal unit) settings and any other supervisory control issues. Oversee the inventory of all relay material issued to the project. Order all missing items through the RCI and Material Coordinator. Direct and oversee all aspects of the mounting and wiring of relays, termination racks, cabling from panel to panel, and termination of all cables by wiremen or electricians. Relay technicians will inspect wiring of all high voltage yard equipment as wired by others. Quality control is provided at the time of this construction by the lead or senior relay technician on the job. Provide on-site support to other departments (Substation, Production. Telecomm, etc...), such as proper direction and placement of high voltage circuit breakers and power transformers. Review and correct as needed, the Substation Operating Instructions as issued by Relay Engineering personnel. Coordinate with others to schedule and sequence each phase of all electrical projects. Knowledgeable in providing and keeping relay protection to all HV equipment throughout the duration of the project. This may require temporary relay settings, wiring, etc... Test CT's of high voltage equipment for ratio, polarity, saturation and meggar insulation tests. Apply relay settings, test and calibrate all relays using calibrated relay test equipment and Enoserv RTS software program. All as-left relay testing documentation will be saved and submitted to RCE. Create and install proper labeling on all panels. Order labels for exterior junction boxes and switch handles. Verify proper wiring of all potential and current circuits from the instrument transformer to the end element device. Relay technicians should have fiber optic splicing and termination abilities with CFOT certification. Relay Technician must be capable of testing all HV apparatus such as power transformer sudden pressure schemes, Power line Carrier line tuner, wave traps and transceivers. Verify transformer and breaker alarms function properly from the equipment terminal blocks, into the control house. Check for local indication, as well as, to the Energy Control Center Functionally test all relay and control circuits to verify proper operation during simulated fault conditions. Confirm proper operation of all new equipment via SCADA by working with System Protection and Control Technicians at the Energy Control Center. Coordinate and schedule with Dispatchers and Substation Construction personnel to energize new equipment. When equipment is energized for the first time, perform, or confirm electrical phasing of new lines or equipment. Take In-Service readings of all new equipment as primary load is first applied. Leave a complete corrected set of relay drawings at the Substation. Turn in a corrected set of red lined drawings to RCE for Relay Design redrafting. Sign and turn in all documents (settings, in-service sheets, CTR sheets, substation operating instructions, point assignment sheets) to the RCI or RCE or appropriate person. Schedule meetings with maintenance personnel to inform them of new equipment, schemes, and answer any questions they may have. Schedule a meeting with the project engineers, if needed, to go over lessons learned. Oversee the documenting of all excess items and schedule a pick-up of this excess material to be returned to the storeroom for credit. Pay Rates: $55-62/hr for senior with 7+ years of experience , $65-77/hr for lead with 10+ years of experience

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a Senior Automation Specialist Role- Software and Control to join our Rexel team located in Tampa Florida! Summary: We’re a leading provider of electrical and automation solutions helping businesses modernize operations and accelerate productivity. Our team combines deep technical expertise with customer-first service to deliver the latest technologies and solutions across diverse industries. We’re growing our automation capabilities and seeking an experienced Automation Product Specialist focused on Software & Controls to join our Florida Team. As an SW&C Automation Specialist —you will be the technical and commercial expert for our Rockwell Automation (Allen Bradley) software and control systems portfolio and our leading Technology Partners . You will work closely with sales teams, customers, suppliers, and implementation partners to specify, position and support software and control solutions that solve complex process and machine control challenges. You will help drive product strategy, training, demos, and pre-sales support. This job will be based out of our Tampa Automation Headquarters and work closely with our Sales, Automation and Services. We are growing, and looking for the right person to join our team. What You'll Do: • Act as the primary product expert for software and control systems, including PLCs, HMIs, SCADA, industrial networks, motion control and related software tools., • Support sales teams with technical pre-sales activities: solution design, product selection, BOMs, quotations and value-based proposals., • Deliver product demonstrations, hands-on workshops and proof-of-concept builds for customers and internal teams., • Provide application support and troubleshooting through project implementation stages and handover to service teams., • Build and maintain strong vendor relationships, stay current on product roadmaps, and feed market insights into supplier and internal product strategies., • Create and deliver technical training materials, product collateral and enablement sessions for sales and service teams., • Collaborate with project managers, engineers and field teams to ensure solutions meet performance, safety and compliance requirements., • Track market trends, competitor offerings and customer needs to identify new opportunities and product gaps., • Meet or exceed sales goals of assigned technology offer, • Develop sales strategies, promotions, programs, and plans for sales growth, • Develop annual performance goals, objectives, and sales action plans, • Prepare periodic sales funnel, weekly sales reports, etc., • Provide technical support for internal and external customers via on-site visit, phone, and email. This could include, but is not limited to troubleshooting products, finding technical documentation and specifications, product selection and, other requested activities, • Establish relationships with sales and customers to better understand sales potential, • Ascertain customer needs by customer visits, phone, and other means of research (internet, etc.), • Work with sales to establish joint strategies and activities, • Provide expert knowledge to Inside Sales to facilitate quoting, order entry, and order expediting, • Create and present technical and commercial training for internal and external customers, • Describe or demonstrate product to customers, • Follow up on all business leads assigned by management, marketing, technical department, or supplier partners, • Acquire, use, and continuously develop personal technical knowledge, • Provide oral and/or written quotations, proposals or estimates of prices, scope of work, terms, and delivery, • Work with prospective customers to move projects through the sales cycle to conclusion, • Properly prepare for sales calls, customers events, etc., • Work with Purchasing on proper inventory of high-tech products and identify any potential obsolesce problems, • Actively participate in appropriate industry groups, • Mentor, train, and coach other Automation specialists. May act as a Team Lead Qualifications What You'll Need • 10+ years of equivalent experience, • Electrical distribution industry or related experience required, • Valid Driver’s License, • High School or GED - Required, • Intermediate/advanced computer skills, specifically with Excel/Outlook/Word, • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, blueprints, or governmental regulations, • Ability to write reports, business correspondence, and procedure manuals, • Ability to effectively present information and respond to questions from small groups of managers, clients, customers, and the general public, • Ability to practice good interpersonal relations, using tact, courtesy, a positive attitude toward customers and co-workers, pleasant communication etiquette, and a general attitude as a representative of goodwill on behalf of the company at work or during company travel, • Ability to develop and present specialized instruction concerning the specific high-tech equipment in the assigned area of responsibility, • Ability to mentor, train, and coach peers Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Frequently – 21% to 50%, • Walk: Must be able to move about inside/outside office or work location - Frequently – 21% to 50%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Frequently – 21% to 50%, • Exposed to electrical hazards; risk of electrical shock - Occasionally – up to 20% Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job Description Lead Instrumentation & Controls (I&C) Technician Travel-Heavy | High Voltage Power EPC | Location: All throughout Florida About the Role This is a leadership role for an experienced I&C professional who enjoys working on major power infrastructure projects across Florida. If you like moving from project to project, taking ownership in the field, and leading complex I&C work in different infrastructure settings, this role was built for you. You’ll be a key field leader on utility and government scale projects, supporting electric utilities and municipalities throughout the region. What You’ll Do • Lead all I&C field activities on water treatment, wastewater, power plants, BESS, and other electrical industrial projects, • Act as the on-site I&C authority, ensuring work is executed safely, accurately, and efficiently, • Travel extensively throughout Florida supporting multiple projects, • Supervise and mentor I&C technicians while coordinating with PMs, engineers, and clients, • Install, test, troubleshoot, and support:, • Protection & Control panels, • Relays, meters, RTUs, PLCs, HMIs, and SCADA systems, • Review and markup drawings, wiring diagrams, loop sheets, and control narratives, • Support outage activities, testing, and commissioning, • Create schedule outlining multi week plans, • Create cut over plans to maintain power to critical equipment, • Create test plans that follows the solicitation documents, • 7+ years of I&C experience, ideally in medium-voltage power or utility environments, • Strong background in switch gear, I&C or protection & control, • Proven experience leading crews in the field, • Comfortable working travel-heavy schedules and rotating between job sites, • Water Treatment / Wastewater, • BESS experience, • Relay testing or commissioning experience, • PLC/SCADA experience, • NICET, journeyman license, or similar certifications

Job Description Position Summary Description Maintains all electrical and electronic equipment associated with the Energy Management Control Center (including digital computer systems, power supply systems, recorders, and instrumentation and communications equipment) in proper operating condition. Essential Functions • Installs, maintains, and checks the master station Supervisory Control and Data Acquisition (SCADA) equipment at the Energy Management Control Center (EMCC) and remote terminal units in the field., • Maintains and installs Strip Chart Recorders, Display Boards, and related electrical and electronic systems., • Maintains computer terminals and teletype equipment., • Troubleshoots and repairs all EMCC related electronics and electrical systems, some to the component level., • Maintains equipment logs and maintenance records as directed on all equipment and systems., • Reports equipment maintenance problems and failures with recommendation of corrective action., • Maintains all EMCC Power Supply Equipment including the Uninterruptable Power Supply (UPS) emergency diesel generator, storage batteries, and all associated switches, panels, and wiring., • Monitors and maintains EMCC computer related air conditioning equipment., • Performs other duties as applicable to the position or as assigned., • Installs, maintains, and checks the master station Supervisory Control and Data Acquisition (SCADA) equipment at the Energy Management Control Center (EMCC) and remote terminal units in the field., • Maintains and installs Strip Chart Recorders, Display Boards, and related electrical and electronic systems., • Maintains computer terminals and teletype equipment., • Troubleshoots and repairs all EMCC related electronics and electrical systems, some to the component level., • Maintains equipment logs and maintenance records as directed on all equipment and systems., • Reports equipment maintenance problems and failures with recommendation of corrective action., • Maintains all EMCC Power Supply Equipment including the Uninterruptable Power Supply (UPS) emergency diesel generator, storage batteries, and all associated switches, panels, and wiring., • Monitors and maintains EMCC computer-related air conditioning equipment., • Performs other duties as applicable to the position or as assigned., • NERC Compliance: Performs NERC Compliance Program roles if/as designated in Seminole’s Standard Ownership Matrix (SOM) including ongoing evidence retention in “audit-ready” form. You should also be familiar with Seminole’s Enterprise Internal Compliance Program (ENT-GCD-RGC-EP-054) to further your understanding of Seminole’s compliance program and the context of your duties and responsibilities attendant to your designation in the SOM. Qualifications and Education Requirements Associate’s degree in Electronics or equivalent. Two (2) years of experience in the maintenance of electronic/digital equipment and/or experience in the operation and maintenance of equipment associated with telecommunications systems is desirable. Electric utility experience preferred. Core Competencies: Adaptable, Collaborative, Conscientious, Critical Thinking, Outcome Driven, Professional Technical Competencies/Skills: • Electronic and Digital Telecommunications, • Electric Theory and Principles, • Effective verbal/nonverbal, listening, and written communications, • Problem Solving, • Analytical Thinking, • Work Independently Physical Requirements Must be able to follow established protective measures including, wearing required personal protective equipment (PPE). May require the use of ear, eye, and head protection equipment. Hand and power tools including electric drills, saws, and soldering equipment are used in this position. Moving heavy test equipment up to 50 pounds is required. Must have a valid driver's license with an acceptable Motor Vehicle Report. Working Conditions Some travel and work outside of normal business hours. While working in certain areas of the plant there is the potential for exposure to hazards typical of an industrial working environment. Subject to call out at any time in response to Energy Management Control Center (EMCC) control systems or equipment problems. Frequent travel to SECI remote facilities for corrective and preventive maintenance with occasional overnight travel required. Conditions in the field may include extreme temperatures and noise levels. Occasional travel to vendor/manufacturer facilities for training and equipment checkout. Subject to being on an on-call shift that rotates; must be within an hour of EMCC while on call. Disclaimer - Management may modify this job description at any time and may require the performance of additional duties, or modification of physical requirements, with or without advance notice.

Job Description P&C Technician 1, 2, or 3 Powerserve Technologies is currently seeking Protection and Control (P&C) Technicians. These opportunities require that you travel to the job sites to perform the necessary work at Substations across Florida. Responsibilities of Position *Protection & Control Tech 1: · Attendance, dependability, reliability and perseverance are critical to our success. • Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must., • Cooperation and teamwork are essential since we all work as part of one team., • Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies., • Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it., • Good judgement is important. We stress doing what’s right over what’s easy., • Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly., • Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods., • Organizational and time management skills are required to be productive because of the attention to detail required., • Teach applicable skills and knowledge to more junior technicians., • Demonstrate advanced proficiency in AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc. Assist more junior technicians with learning., • Demonstrate thorough understanding of the theory of operation of basic relays and protection systems, devices, instrumentation transformers, SCADA, etc. Learn theory of operation of more advanced relays, protection systems, etc. Assist more junior technicians with learning this information., • Demonstrate proficiency with drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions. Assist more junior technicians with learning the symbols and function numbers., • Demonstrate logical problem-solving abilities., • Continue to learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices. Assist more junior technicians with learning testing methods, test equipment uses and theory and testing devices., • Draw schematic/elementary diagrams from verbal descriptions. Assist more junior engineers with understanding descriptions and how to translate into drawings., • Demonstrate understanding and use of good Human Performance Tools and techniques in testing and record keeping techniques. Provide guidance and explanation to more junior technicians., • Demonstrate ability to read utility and other technical drawings. Assist more junior technicians to develop this skill., • Demonstrate the ability to identify the physical location, equipment and orientation shown on the drawings. Assist more junior technicians in locating the physical equipment from drawings., • Demonstrate familiarity with hand and power tools and their usages. Monitor more junior technicians for proper tool selection and use; provide instruction as needed., • Complete assigned paperwork, test forms and procedures in a timely manner. Understand the reasoning behind the forms. Explain the documents and forms to more junior technicians as needed., • Assemble control panels from drawings., • Develop leadership and responsibility., • Follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe. Stop anyone not following the rules., • Proficiency in identifying all substation equipment and explaining the function of it. Assist more junior technicians with identification and function of this equipment., • Be an example to others. Let your actions be a model for other teammates. *Protection & Control Tech 2 • Attendance, dependability, reliability and perseverance are critical to our success., • Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must., • Cooperation and teamwork are essential since we all work as part of one team., • Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies., • Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it., • Good judgement is important. We stress doing what’s right over what’s easy., • Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly., • Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods., • Organizational and time management skills are required to be productive because of the attention to detail required., • Demonstrate proficiency in AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc., • Demonstrate understanding of the theory of operation of basic relays and protection systems, devices, instrumentation transformers, SCADA, etc. Learn theory of operation of more advanced relays, protection systems, etc., • Demonstrate familiarity with drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions., • Demonstrate logical problem-solving abilities., • Continue to learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices., • Demonstrate the ability to draw schematic/elementary diagrams from verbal descriptions., • Demonstrate understanding and use of good Human Performance Tools along with testing and record keeping techniques., • Demonstrate ability to read and understand utility and other technical drawings., • Demonstrate the ability to identify the physical location, equipment and orientation shown on the drawings., • Demonstrate familiarity with hand and power tools and their usages., • Complete assigned paperwork, test forms and procedures in a timely manner. Understand the reasoning behind the forms., • Assemble control panels from drawings., • Develop leadership and responsibility., • Follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe., • Proficiency in identifying most substation equipment and explain the it., • Be an example to others. Let your actions be a model for other teammates. *Protection & Control Tech 3 • Attendance, dependability, reliability and perseverance are critical to our success., • Fluency in English language comprehension communication skills and understanding technical terminology are necessary. Continued self-improvement of those skills is a must., • Cooperation and teamwork are essential since we all work as part of one team., • Initiative to further one’s knowledge and perform tasks is necessary to keep up with changing technologies., • Quality in workmanship, of character and personality is essential in our employees as our reputation is built on it., • Good judgement is important. We stress doing what’s right over what’s easy., • Adaptability is a key attribute since tasks, work sites and necessary skill sets can change rapidly., • Creativity and curiosity are traits needed to continue to learn and understand the equipment, process and methods., • Organizational and time management skills are required to be productive because of the attention to detail required., • Demonstrate basic understanding of AC and DC circuit theory, electronics, transformers, 3 phase systems, Boolean Algebra, etc., • Learn the theory of operation of relays from different manufactures and protective systems, devices, instrumentation transformers, SCADA, etc. Teach theory to more junior technicians., • Learn drawing symbiology, ANSI/IEEE relay function numbers and how different manufactures accomplish the functions., • Demonstrate logical problem-solving abilities., • Learn, understand and demonstrate advanced testing methodologies and proper use of multimeters, test equipment and testing devices., • Learn to draw schematic/elementary diagrams from verbal descriptions., • Learn, understand and use good Human Performance Tools along with testing and record keeping techniques., • Learn to read and understand utility and other technical drawings., • Learn how to identify the physical location, equipment and orientation shown on the drawings., • Demonstrate familiarity with hand and power tools and their usages., • Learn how to complete assigned paperwork, test forms and procedures in a timely manner. Learn to understand the reasoning behind the forms., • Learn how to assemble control panels from drawings., • Begin developing leadership and responsibility., • Learn and follow all Human Performance, Safety and Environmental rules and use all procedures, processes and tools available. Take proactive steps to keep everyone safe., • Learn to identify all substation equipment and explain the function it., • Be an example to others. Let your actions be a model for other teammates. Qualifications: P&C Tech 1: Required: Associate of Science in applied field (electronics, power systems, information). Associates of Arts with pre-electrical engineering electives. Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations. Proficiency with calculations of 3 phase, transformer, circuit analysis, etc. parameters. Proficiency in setting and testing overcurrent microprocessor-based relays. One (1) year of field experience in controls or control panel wiring. Preferred: Familiarity with ANSI/NETA testing requirements and procedures. Three (3) years of field experience in protection and control systems. P&C Tech 2: Required (Basic): Associate of Science in applied field (electronics, power systems, information). Associates of Arts with pre-electrical engineering electives. Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations. Proficiency with calculations of 3 phase, transformer, circuit analysis, etc. parameters. Proficiency in setting and testing overcurrent microprocessor-based relays. One (1) year of field experience in controls or control panel wiring. Preferred: Familiarity with ANSI/NETA testing requirements and procedures. Two (2) years of field experience in protection and control systems. P&C Tech 3: Required Qualifications: High school diploma with experience wiring control panels or similar products. Competent in the understanding and application of Algebra and Trigonometry as it pertains to electrical theory and testing calculations. Familiarity with 3 phase and Introductory experience with setting and testing overcurrent microprocessor-based relays. Experience in field control or control panel wiring. Preferred: Associate of Science in applied field (electronics, power systems, information). Associates of Arts with pre-electrical engineering electives. One (1) year documentable experience in control panel wiring and protection and control systems. Skills and Characteristics: Self-Motivated, detail and goal oriented. Dependability and punctuality. Mechanical aptitude. Studious and motivated to learn. Proficient in hand and power tool use. Attentive to detail. Time organization. Leadership.

Job Summary The Capital Project Manager coordinates large capital improvement and new construction projects and also performs due diligence inspections for potential real estate acquisitions as part of the Physical Assets or Capital Projects team.The successful candidate will embody and work to rein

Join the winning TEAM with a bright future! TLR Group is PROUD to announce that we have been awarded:.National Apartment Association's.Best Places to Work "Best Places to Work List 2021".Fast 50 – Fastest Growing Companies 2020” (TLR Ranked 12th).Fast 50 – Fastest Growing Companies 2021” (TL

Bilingual Spanish Maintenance Supervisor(Food).Are you looking to make a career change to a rapidly growing, stable, innovating company? This exciting opportunity as a Bilingual Spanish Maintenance Supervisor(Food) offers a competitive salary plus an excellent benefits package including medical insu

Join the winning TEAM with a bright future! TLR Group is PROUD to announce that we have been awarded:.National Apartment Association's.Best Places to Work "Best Places to Work List 2021".Fast 50 – Fastest Growing Companies 2020” (TLR Ranked 12th).Fast 50 – Fastest Growing Companies 2021” (TL

Our success in delivering innovation and business growth is inspired by the connections our diverse teams create every day, with our clients and each other.It's these connections that make Quadient such an exceptional place to grow your career, develop your skills and make a real impact – help our

Join the winning TEAM with a bright future! TLR Group is PROUD to announce that we have been awarded:.National Apartment Association's.Best Places to Work "Best Places to Work List 2021".Fast 50 – Fastest Growing Companies 2020” (TLR Ranked 12th).Fast 50 – Fastest Growing Companies 2021” (TL

This role requires the ability to work lawfully in the U.Plus, enjoy perks like free and discounted internet, TV, and mobile, all while paving the way for a long and rewarding career with us.Do you enjoy solving technical challenges? Do you like working in in a dynamic environment? As a Field Techni

Join the winning TEAM with a bright future! TLR Group is PROUD to announce that we have been awarded:.National Apartment Association's Best Places to Work.Bay Area Apartment Association.Gold Medallion Award for Diversity & Inclusion Initiative Award 2021.Fast 50 – Fastest Growing Companies 2021”

North American Substation Services (NASS) is a national leader in transformer services and high-voltage substation installation, maintenance, testing, and repair.With more than 20 years of experience, we deliver comprehensive, one-stop solutions for utilities, industrial operations, and critical inf

We are seeking a licensed Electrical Engineer (PE) with strong design expertise and project management experience to lead federal infrastructure, water/wastewater and industrial projects.This role blends hands-on engineering with leadership responsibilities, making it ideal for someone who thrives i

Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day.As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's mos

We are seeking a highly skilled Senior Electrical Engineer to provide expert technical leadership and contribute to the delivery of industrial design projects across the chemical, power, utilities, and manufacturing sectors.This role involves designing and retrofitting industrial power distribution

Are you a hands-on problem solver who loves to travel and provide exceptional customer service? IPS is seeking a dynamic Generator Technician to join our team.In this role, no day will be the same.You'll troubleshoot, repair, and maintain equipment while delivering top-notch service to our customers

At ABB, we help industries run leaner and cleaner-and every person here makes that happen.You'll be empowered to lead, supported to grow, and proud of the impact we create together.Join us and help run what runs the world.This position reports to: IAPI Service Center Manager __ As a Senior Field

Perform a wide variety of tasks associated with servicing, repairing or operation of most CNC machine tools.Use precision test equipment to analyze, troubleshoot and repair complex mechanical and electrical problems.Advanced operation of CNC controls from different manufacturers.Successfully coordin

This role requires the ability to work lawfully in the U.Plus, enjoy perks like free and discounted internet, TV, and mobile, all while paving the way for a long and rewarding career with us.Do you enjoy solving technical challenges? Do you like working in in a dynamic environment? As a Field Techni

Our benefits package includes coverage of your health, wealth, and wellness for you and your eligible spouse/dependents.We offer a competitive salary and benefits package, including a 401k with company match and generous paid time off to help you balance your life.Below is a list of benefits you wil

Apply below after reading through all the details and supporting information regarding this job opportunity.Our success in delivering innovation and business growth is inspired by the connections our diverse teams create every day, with our clients and each other.It’s these connections that make Q

Lead Nuclear Electrical Engineer Contract Position | 11 Months | Remote Options Available Location: Juno Beach, FL Overview Our client is a leading energy company seeking an experienced Lead Nuclear Electrical Engineer to join their nuclear operations team.This is an exceptional opportunity for a se

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome