Shop jobs in Buffalo, New York - Page 4Create job alerts

Job Description Process Piping Engineer — Pipe Fitting Manufacturing Location: Buffalo, NY Department: Engineering FLSA Status: Exempt About GTI GTI Fabrication designs and manufactures custom modular enclosures, energy systems, and industrial structures for energy, defense, and heavy-industrial markets. As GTI scales production and expands our product portfolio, the alignment between current & future customer demand and operational capacity has become critical to our long-term success. Role Summary The Process Piping Engineer is responsible for the engineering, design, and process development of pipe fitting manufacturing operations. This role supports new product introduction (NPI) from concept through production launch, ensuring manufacturing processes meet quality, throughput, cost, safety, and code compliance targets. The engineer partners closely with product engineering, quality, tooling, supply chain, production, and customer technical teams to bring new pipe fitting products to market and drive continuous improvement in existing manufacturing lines. Core Responsibilities Process Engineering & NPI Support Develop and own manufacturing process designs for pipe fitting production, including forming, machining, joining, casting/forging interfaces, surface treatment, and assembly operations. Define process flows, routings, and work instructions from prototype through production readiness. Support design-for-manufacturability (DFM) reviews, identifying opportunities to reduce complexity, material waste, cycle time, and cost. Define and document process assumptions, operating windows, tooling requirements, and acceptance criteria for new fitting designs. Specifications & Standards Author and maintain process specifications covering materials, forming and joining methods, surface treatment, cleaning, coating, marking, and inspection criteria for pipe fittings. Select materials and manufacturing methods appropriate to product requirements (e.g., carbon steel, stainless, copper alloys, HDPE; forged, cast, machined, grooved, threaded, flanged), balancing performance, manufacturability, and lifecycle cost. Ensure compliance with applicable product and manufacturing standards (e.g., ASME B16 series, MSS SP standards, ASTM material specs, applicable OSHA/shop safety requirements) and coordinate with customers and third-party agencies on qualification and certification requirements. Integration & Delivery Coordinate cross-functionally with product engineers, quality, tooling and fixturing, supply chain, and production supervisors to ensure process intent is realized on the shop floor. Support procurement by developing BOMs, tooling and equipment requirements, RFQ packages, and technical evaluations of supplier proposals. Drive process design reviews (concept, pilot, pre-production, production release), resolve NCRs and process deviations, and manage process-related changes during ramp. Quality, Risk, and Production Launch Support Define QA/QC requirements including in-process inspection checkpoints, dimensional verification, pressure/leak test requirements, surface and cleanliness standards, and first article inspection (FAI) criteria. Support production launch by developing or reviewing process FMEAs, control plans, operator work instructions, and pre-production build checklists. Participate in root-cause investigations for manufacturing escapes (dimensional non-conformance, leaks, surface defects, tooling failures) and implement corrective and preventive actions. Continuous Improvement Standardize and modularize manufacturing processes to improve repeatability, speed to launch, and cost competitiveness. Capture lessons learned from NPI programs and update process standards, specifications, and design tools accordingly. Identify and drive capital and tooling investments that improve throughput, quality, or safety. Qualifications Required • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or related discipline., • 5+ years of process or manufacturing engineering experience, with significant exposure to pipe fitting, valve, or related metal component manufacturing., • Proficiency developing process flows, work instructions, tooling specifications, and inspection criteria., • Demonstrated ability to support new product launches from prototype through production readiness., • Experience with pipe fitting manufacturing processes (forging, casting, CNC machining, threading, grooving, end-facing)., • Familiarity with ASME B16 series, MSS SP standards, and ASTM material requirements for fittings., • Experience with GD&T, CMM inspection, and first article inspection processes., • Exposure to lean manufacturing, Six Sigma, or structured problem-solving methodologies., • Strong fundamentals in manufacturing processes, materials, and metrology., • Practical, floor-oriented understanding of tooling, fixturing, and trade/operator sequencing., • Ability to manage multiple NPI programs simultaneously and drive closure on open technical items., • Clear technical communication with production teams, suppliers, customers, and internal stakeholders., • Process flow diagrams and manufacturing routings., • Tooling and fixturing specifications and procurement packages., • Process FMEAs, control plans, and operator work instructions., • Material and process specifications, inspection and test standards., • NPI milestone reviews, production readiness assessments., • NCR disposition, RCA documentation, and corrective action plans., • Lessons learned and process standard updates.

Job Description Senior Electrical Designer- Solar PV, BESS & Microgrid Why This Role Matters: As a member of the BSE Team, the Senior Electrical Designer works with the design team to plan, design, and oversee the installation of building systems on a variety of project types. In this role, you will design building systems for projects across our practice areas, improving the built environment, and creating a more sustainable world in the process. As a member of the BSE team, you have developed a deep expertise in a building systems specialty and have experience in design coordination as part of a multi-disciplinary team. The Senior BSE Designer works independently on moderately to highly complex projects. What You’ll Do: • Perform Codes and Standards review. Discuss interpretation with Engineer of Record (EOR), if required, • Perform Revit drafting and comply with company standards, • Lead project design efforts and communicate with EOR, • Perform site investigations and document existing conditions, • Oversee the development of Revit drawings – plans, details, schematics, and schedules, • Attend internal coordination meetings and communicate with other disciplines, • Attend client meetings and participate in project scope development, • Communicate engineering concepts clearly with clients, • Prepare engineering reports and opinions of probable construction costs, • Perform building condition evaluations and prepare reports, • Produces designs that have minimal QA/QC comments and minimal drawing presentation mistakes, • Prepare specifications, • Ability to design within a construction budget, • Review and approve submittals and shop drawings, • Perform construction punch lists, • Attend construction meetings, • Assist CPL senior leadership with proposal efforts as required, • AS Degree required, professional degree in Electrical Engineering preferred, • A minimum of eight (8) years of experience, • Ability to perform difficult technical computations and consolidate acquired data, • Ability to interact effectively across organizational boundaries to achieve goals and meet deadlines, • Familiarity with building systems such as HVAC, plumbing, power distribution, lighting and low-voltage systems, and structural components, • Working knowledge of Revit and other relevant design programs, • Proficient in utilizing Microsoft Office tools, • Strong verbal, written, and interpersonal skills, • Engineering, analytical, and technical writing skills with attention to detail, • An understanding of construction plans/specifications To regular full-time and part-time employees who regularly work 30 or more hours per week • Healthcare for you and your family: Medical, Dental& Vision insurance. Single HDHP Medical plan with 100% paid premium, • Health Savings Account (HSA) with employer match, • Medical and Dependent Care Flexible Spending Accounts, • Long-Term Disability Insurance Company/team member sharing, • FREE Life Insurance and AD+D Insurance + Voluntary Life Insurance for you and your family., • FREE Short-Term and Long-Term Disability Insurance., • PTO + Sick Time + 8 Holidays a year., • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Internal Mobility & Career Advancement. We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments. CPL does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. CPL will not be responsible for any fees arising from the use of resumes submitted by recruiting professionals or agencies that do not have a current placement fee agreement with CPL. All initial communication with recruiting professionals or agencies must go through our Talent Acquisition Team. CPL is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to gender, race, color, religion, national origin, ancestry, age, marital status, sexual orientation, pregnancy, disability, citizenship, military or veteran status, gender expression and/or identity, or any other status or characteristic protected by federal, state, or local law.

Job DescriptionDescription:Job description Position Summary The Final Inspection Supervisor is responsible to lead a team of deburr employees on quality and packaging of all manufactured product at Snyder Industries. Manages shipping/receiving department to ensure correct product is shipping to meet on time delivery targets. Works with internal sales team to prioritize product flow through final inspection. Works with internal quality team on non-conformances found at final. Uses blueprints, excel spreadsheets, reporting, and computer MRP software to meet customer requirements. Requirements: Essential Duties and Responsibilities The essential functions include, but are not limited to the following: · Blueprint reading, GD&T, Excel, ERP systems. · Understand manufacturing processes: Turning, Milling, Gear cutting, and Heat treating. · Works with Quality Manager on non-conformances found in department · Manages final tapping operations · Manages deburr employees · Manages final inspection checklists and visual inspections before packaging products · Performs visual inspection in accordance to customer specifications and ISO 9001:2015 requirements · Utilizes the ship list and working with production analyst to meet delivery needs · Performs diversified deburring and final inspection duties · Operates tools and equipment such as hand grinder, Bridgeport mill, polishing station, and tap tables · Manages shipping/receiving department · Works with engineering team on gauge needs, fixturing, tooling. · Works with quality department with calibration needs · Manages organization of inspection area and raw material warehouse · Complies with safety regulations in all aspects of performing job responsibilities. · Operates computer and enters inspection data · Other Misc. Deburr/Inspection functions Minimum Qualifications (Knowledge, Skills, and Abilities) · Experience and interest in a CNC machining job shop environment · Strong written and verbal communication skills · Attentive to detail; organized · Ability to supervise · Ability to take initiative, to maintain confidentiality, to meet deadlines, and to work in a team environment · Proficient in MS Office Suite (Outlook, Word, Excel, PowerPoint) · Recommend: Understanding of raw materials: castings, forgings, bar stock, plate materials · Recommend: Understanding of CNC turning, CNC milling, Heat treat (carburization, quench & tempering, induction hardening, welding), and gear cutting (Shaping & Hobbing) Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. This position operates within the CMM inspection room and has a heavy presence on the manufacturing floor. Employee will be responsible for looking at all angles of parts in the machine and on pallets. This role routinely uses standard office equipment such as computers, phones, cameras, copiers, and filing cabinets. While performing the duties of this job, the employee is regularly required to stand; walk; use hands; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is occasionally required to sit. The employee must lift up to fifty (50) lbs. occasionally. Job Type: Full-time Pay: $30.00 - $34.00 per hour Expected hours: 40 per week Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • 8 hour shift, • Day shift

Job Description SHOP MECHANIC WANTED FOR LIGHT/ MEDIUM & HEAVY-DUTY TRUCK AND TRAILER REPAIR FACILITY FULL-TIME MONDAY - FRIDAY PLUS UNLIMITED OVERTIME (BENEFITS) AVAILABLE IF NEEDED PLEASE APPLY TODAY Monday-thru Friday 40hrs a week with overtime Responsibilities: • Assess vehicles and/or machinery to accurately diagnose and repair issues, • Provide routine inspections of vehicles and inform clients of any issues, • Prepare quotes and work estimates as requested, • Maintain and clean garage equipment and tools to ensure they are kept in a safe and usable condition at all times, • Adhere to company work safety policies Qualifications: • Experience conducting routine services and vehicle maintenance, • Ability to prepare work estimates and quotes

Job Description BIDCO Marine Group – Buffalo, NY | Home Every Night Since 1993, BIDCO Marine Group (Buffalo Industrial Diving Company) has been a leading inland and offshore marine and underwater construction contractor on the Great Lakes and across the Northeast. With a multi-year backlog and an expanding fleet of tugs, barges, cranes, and specialized dive-support equipment, we require the immediate addition of a Diesel Mechanic to our team at our modern waterfront headquarters located in Buffalo, NY. What You’ll Work On • Push-boats, dive vessels & crew boats (Cummins, Caterpillar, Detroit Diesel), • Flexifloat sectional barge equipment, • Cranes (American/Terex, Link-Belt, Pettibone, Grove), • Heavy equipment (excavators, loaders, forklifts), • Marine hydraulics, winches, pumps, dive compressors, hot-water systems, • Trucks, trailers, pickups, and vast support fleet of small equipment, • Perform preventative maintenance and routine repairs, • Diagnose and troubleshoot diesel, hydraulic, mechanical, and electrical systems, • Weld and fabricate (stick, MIG, TIG), • Maintain parts inventory and detailed service records, • 5+ years heavy equipment / diesel mechanic experience, • Diagnostic and repair skills on diesel engines and hydraulics, • Welding and fabrication abilities a plus, • Current crane operator or past crane experience a very major plus, • Your own professional tools (we supply everything else), • Clean driving record and ability to pass background/drug screen (TWIC helpful), • Top base salary (based on experience), • Regular with overtime as needed/desired, • Top-tier medical + Company 401(k) match, • Fully equipped shop with diagnostic tools, welders, lifts, etc., • Uniforms, • Paid holidays, vacation, and personal days, • Year-round steady work, • This is a career position as a key team member with responsibility, and BIDCO has had zero mechanic layoffs in our 33 years in business., • Work 7:00 to 3:30 everyday M-F, home every night, with occasional overtime.Company DescriptionBIDCO Marine Group, Inc. (Buffalo Industrial Diving Company) has been in business for 33 years and is an equal opportunity employer. Veterans are respected here and are strongly encouraged to apply. We offer fully paid top-tier Highmark Health Insurance with a family plan (employer cost) value of over $30,000.00 per year. Check our projects at bidcomarine.com which is our very outdated 2018 website. Thank you for looking!BIDCO Marine Group, Inc. (Buffalo Industrial Diving Company) has been in business for 33 years and is an equal opportunity employer. Veterans are respected here and are strongly encouraged to apply. We offer fully paid top-tier Highmark Health Insurance with a family plan (employer cost) value of over $30,000.00 per year.\r\n\r\nCheck our projects at bidcomarine.com which is our very outdated 2018 website. Thank you for looking!

Job Description The Fleet & Marine Yard Manager is a hands-on leadership role responsible for overseeing all shop, yard, and fleet operations at BIDCO’s Buffalo facility on the Buffalo River. This position manages the maintenance, readiness, and lifecycle of the company’s marine vessels, heavy equipment, and support assets to ensure maximum uptime and reliability for marine and underwater construction projects across New York State and the Great Lakes region. The role combines operational oversight, preventive maintenance, logistics coordination, regulatory compliance, cost control, and team leadership in a dynamic waterfront environment. Key Responsibilities • Oversee the full lifecycle of fleet assets, including specification, procurement, maintenance, repair, and disposal of marine vessels (tugs, barges, workboats), cranes, excavators, dive support equipment, and land-based vehicles/trailers., • Develop and manage preventive maintenance programs, inspection schedules, and repair protocols tailored to harsh marine conditions, including corrosion control and winterization., • Plan and coordinate equipment mobilization, demobilization, and transportation to project sites, including permitting, loadouts, and staging., • Track equipment performance, utilization, downtime, and costs (fuel, parts, labor); implement improvements to reduce expenses and extend asset life., • Ensure full regulatory compliance with USCG (inspected and uninspected vessels), OSHA, DOT, and environmental regulations (NYDEC)., • Manage relationships with shop vendors, repair yards, and service providers; negotiate contracts and approve invoices., • Supervise and develop fleet personnel (mechanics, operators, fabricators), providing training on safety, maintenance, and company procedures., • Collaborate with project managers to align fleet availability with project schedules, bids, and seasonal demands., • Maintain accurate records of maintenance, certifications, inspections, and registrations; utilize telematics and fleet management systems., • Develop and control the annual fleet operating budget and contribute to capital planning for fleet renewal. 1. Annualized Base Salary: TBD based upon experience • Overtime paid over 40 Hrs. at 1.5 x base hourly rate, • Paid Weekly by Direct Deposit. 2. Heath Care Insurance: Top-Tier HIGHMARK Platinum POS Plus Benefits • Two Singles Plan - Premium Value $2,148.57 Month / $25,782.84 Year, • Family Plan - Premium Value $3,020.89 Month / $36,250.68 Year 3. Holidays: 6 paid national holidays. • New Years Day, • Memorial Day, • Independence Day, • Labor Day, • Christmas Day, • New Years Day 4. Sick Days: Five (5), 5. Vacation: 2 weeks paid vacation per year., 6. 401(K) Company Match: First $1,000.00 of Employee Contribution., 7. A Company Truck will be provided., 8. A Company Debit/Credit Card will be issued to you for making approved company purchases., 9. Annual Bonus: Merit based salary bonuses are awarded annually per the discretion of the President. Check our company projects at bidcomarine.com which is our very outdated 2018 website. Thank you for looking!BIDCO Marine Group, Inc. (Buffalo Industrial Diving Company) has been in business for 33 years and is an equal opportunity employer. Veterans are respected here and are strongly encouraged to apply. \r\n\r\nCheck our company projects at bidcomarine.com which is our very outdated 2018 website. Thank you for looking!

Job Description Job Description Summary: Responsible for fielding calls from customers and dispatching via phone/text/email to Technicians/Drivers/Wrecker Operators utilizing the correct equipment and tooling to fulfill the customers’ immediate need. Multi-tasking between telephone calls, GPS monitoring, and direct communication with Technicians/Drivers/Wrecker Operators to execute all assigned tasks and meet customers’ demands. During the night-shift hours, the Dispatcher will practice independent sound and logical decision making. Duties and Responsibilities (including but are not limited to): 1. Taking phone calls from customers looking for heavy-duty tows, winch-outs, and roadside emergency repairs. Dispatching Technicians, Drivers, and Wrecker Operators with appropriate equipment and tooling to fulfill the customers’ immediate need., 2. Inputting all customer breakdown information into QuickBooks for distribution to Technicians, Drivers, and Wrecker Operators. All necessary information on the repair, tow, and/or winch-out must be entered accurately., 3. Data entry of information directly and accurately from work orders provided to employee by both email and hard copy from work completed on company property or roadside., 4. Customer follow-ups to encompass estimated time of arrivals, work complete details, purchase orders, payments, etc. Constant communication with customers is key to success., 5. Process, document, and enter payments by check, cash, credit card, and virtual credit card from customers into RoadSync application., 6. Process and input paperwork into customer-specific programming such as ARI, Michelin On-Call, Etc. and follow through until payment is made., 7. Thruway event information specific to the Dispatch position to include the initial call-in request to populate an event number, advising the Technician, Driver, and/or Wrecker Operator to verify unit location on Thruway, providing any updates to the Thruway Authority as necessary, and following and all other Thruway guidelines and procedures., 8. Constant and consistent use of GPS tracking of fleet vehicles, Technicians, Drivers, and Wrecker Operators through software to include Samsara and Life 360. This means monitoring to ensure employees are using proper truck routes on tows when applicable, maintain proper speed, etc., 9. Dispatchers are responsible for confirming that employees on the road team are starting and ending shifts as put forth by the Road Team Manager. If there are any discrepancies, they must be brought up with the department Manager immediately. If road team employees miss any punches, they must fill out the missed punch form and turn it in to the Dispatcher on duty. The Dispatcher will sign off on then leave it for the Manager to input in Paychex and submit to payroll., 10. Maintain an organized & clean work environment to incorporate proper handling and filing of work orders and any other assorted paperwork pertaining to the Road Team., 11. This position requires holiday coverage at a higher rate of pay. You will be part of a scheduling rotation for this (not every holiday). Other Various Office Duties: 1. Answer telephone calls and directing non-Road Team related inquiries to proper recipient., 2. Utilization of company email for all work-related electronic communication and correspondence., 3. Utilization of company equipment for filing, faxing, scanning, etc., 4. You will be responsible for filling out and emailing an end-of-shift recap daily. Job Types: Full-time, Part-time Pay: $25-$30 per hour depending on experience and skills Company DescriptionWe provide services to the heavy duty diesel truck community throughout WNY. A newer company that was formed in 2015 and has grown from two employees to fifty in 10 years. There are three shop locations with a fleet of 50 (heavy tow trucks, mobile service trucks, hauling trailers and tractors). Our main building is located at 1989 Harlem Road that has modern, professional administrative offices, which is conveniently located off of Interstate 90 and 190. MERJ Fleet Services awarded one of Business First's fasting growing companies in WNY and we were also awarded Business Firsts Best Places to Work award. It is a fast paced environment that can become demanding, especially in our busiest season of Buffalo winters!! However, we make it enjoyable with strong working relationships and high respect for each other.We provide services to the heavy duty diesel truck community throughout WNY. A newer company that was formed in 2015 and has grown from two employees to fifty in 10 years. There are three shop locations with a fleet of 50 (heavy tow trucks, mobile service trucks, hauling trailers and tractors). Our main building is located at 1989 Harlem Road that has modern, professional administrative offices, which is conveniently located off of Interstate 90 and 190. MERJ Fleet Services awarded one of Business First's fasting growing companies in WNY and we were also awarded Business Firsts Best Places to Work award. It is a fast paced environment that can become demanding, especially in our busiest season of Buffalo winters!! However, we make it enjoyable with strong working relationships and high respect for each other.

Job Description Position Summary The Supply Chain Clerk supports API Heat Transfer’s Lean cultural transformation by assisting with purchasing, inventory control, and supply chain processes within the Buffalo facility. This role works closely with Purchasing, Operations, and the Corporate Supply Chain function to ensure accurate inventory management, efficient material flow, and reliable support of manufacturing and maintenance operations. At API Heat Transfer, we take our culture transformation seriously. To help find the best fit for our positions and organization, candidates are required to complete our 10‑minute Culture Index Survey after submitting their application. This allows interview time to focus more deeply on job behaviors and work history. Culture Index Survey Link: What You Will Do Purchasing & Supplier Support · Assist with the purchase of materials, supplies, equipment, and services for maintenance, repair, and operations (MRO) · Research potential suppliers and support price and contract negotiations · Maintain supplier relationships and identify cost‑saving opportunities · Utilize software tools to streamline purchasing processes and improve efficiency Inventory Control & Accuracy · Inventory, store, and distribute tools and equipment to personnel · Assist with implementing and maintaining a scanner‑based inventory system to enhance accuracy · Support inventory management through labeling, tracking, and coordinating material movement · Manage cycle counts against stock lists and monitor VMI inventory to maintain appropriate stock levels ERP & Data Management · Update ERP systems with regular transactions, adjustments, and scrap activity · Research significant inventory variances and make necessary corrections · Analyze consumption reports to determine whether materials are restocked, returned, written off, or scrapped Continuous Improvement & Process Support · Implement corrective actions to resolve discrepancies and reduce redundancies · Support Lean Manufacturing and Continuous Improvement initiatives related to supply chain and inventory processes · Assist with process documentation and reporting as required Additional Responsibilities · Perform other duties as assigned by management What You Bring · Associate’s degree preferred; an equivalent combination of education and experience may be considered · 1–2 years of experience in a manufacturing or operations environment · Proven supply chain experience with inventory control, reconciliation, and cycle counting · Experience with Lean Manufacturing and Continuous Improvement initiatives · Working knowledge of ERP systems; PLEX experience preferred · Proficiency with Microsoft Word and Excel · Strong analytical and organizational skills with the ability to manage multiple priorities · Excellent verbal, written, and interpersonal communication skills · General understanding of manufacturing environments and order flow What We Offer You · Opportunity to work with leading‑edge technology in the heat transfer industry · Ability to impact customers across multiple industries · Comprehensive health and welfare benefits, 401(k), paid time off, and professional development opportunities · Supportive, team‑focused environment aligned with Lean cultural transformation · Salary Range: $50,000 – $60,000 annually, commensurate with education and experience Physical Requirements · Ability to sit, stand, and walk within both office and production floor environments · Occasional lifting of up to 50 lbs · Visual acuity for computer screens and documents · Ability to wear required PPE when on the shop floor · Frequent use of hands for typing, scanning, and document handling Equal Employment Opportunity Statement API Heat Transfer, Inc. is an Equal Opportunity Employer. We comply with all applicable federal, state, and local employment laws and do not discriminate on the basis of any protected status. INDZ

Job Description Job Title Senior Structural Engineer — Modular Structures Location Phoenix, AZ or Buffalo, NY Department Engineering Employment Type Full-Time | Exempt Company Overview GTI designs, engineers, and manufactures complex modular systems supporting energy storage, power generation, modular data center infrastructure, defense, and industrial markets. Operating in a high-mix, engineered-to-order manufacturing environment, GTI delivers steel enclosures, integrated platforms, and mission-critical modular systems. Our structural engineering team designs container-scale modular structural systems built entirely from structural steel. Every design decision directly impacts manufacturability, fabrication sequencing, and structural performance in the field. Position Overview The Senior Structural Engineer is the top individual contributor on the structural engineering team and the primary technical resource for complex structural analysis, connection design, and documentation. This role owns the most technically demanding structural scopes, sets the quality standard for structural deliverables, and works closely with the Technical Director to develop structural systems engineered for both performance and manufacturability. A Professional Engineer (PE) license is strongly preferred, as this role may be responsible for stamping and sealing structural calculations and drawings. Key Responsibilities Structural Analysis & Calculations • Lead complex structural analysis of all-steel modular systems including frames, panels, and connection assemblies, • Produce and own structural calculation packages for projects of significant scope and complexity, • Perform member sizing, load path analysis, and lateral system design in accordance with AISC and ASCE 7, • Design welded and bolted structural connections compliant with AWS D1.1 and AISC standards, • Design mechanical fastener connections including bolt patterns, bearing checks, and shear/tension interaction, • Review and perform quality control on calculations and connection designs developed by mid-level and junior engineers, • Stamp and seal structural calculations and drawings where PE licensure applies Detailing & Documentation • Develop complete structural drawing packages using AutoCAD including plans, elevations, sections, connection details, and weld schedules, • Produce connection details that are manufacturable on the shop floor, considering weld access, fit-up tolerances, and fabrication sequencing, • Collaborate closely with fabrication teams to ensure designs are production-ready and aligned with internal manufacturing capabilities, • Review shop drawings and support QA/QC processes through design validation and production feedback, • Ensure structural documentation packages are coordinated, accurate, and fabrication-ready Technical Leadership • Serve as the primary technical resource and mentor for the structural engineering team, • Participate in internal design reviews and provide guidance on structural analysis and connection design, • Partner with the Technical Director on complex structural challenges and new modular system development, • Contribute to internal structural engineering standards, connection libraries, and design guides, • Support continuous improvement initiatives related to Design for Manufacturing (DFM) and structural detailing practices Required Qualifications • Bachelor’s degree in Civil Engineering, Structural Engineering, or related discipline, • 10–15 years of structural engineering experience with demonstrated expertise in structural steel design, • Professional Engineer (PE) license strongly preferred; EIT candidates actively pursuing licensure will be considered, • Deep expertise in structural steel design including members, frames, and connection systems, • Experience designing welded connections including fillet, groove, and partial penetration welds, • Working knowledge of AWS D1.1 Structural Welding Code — Steel, • Experience designing bolted connections including ASTM A325/A490 high-strength bolts, bearing connections, and slip-critical connections, • Proficiency using RISA (2D/3D) or similar structural analysis tools, • Proficiency using AutoCAD for structural detailing and drawing production, • Strong knowledge of AISC 360, ASCE 7, and IBC Preferred Qualifications • Experience supporting structural steel fabrication in a manufacturing environment, • Experience with modular, prefabricated, or containerized structural systems, • Familiarity with SolidWorks or similar 3D modeling tools used in steel fabrication environments, • Experience reviewing fabrication shop drawings and supporting QA/QC processes within steel fabrication operations

Job DescriptionResponsibilities * Maintain a safe and clean work area per 6S standards. * Refer unusual or unsafe conditions to supervisor. * Know appropriate level of shop math as required. * Read and understand blueprints. * Know intricate gauging methods, inspect work produced and show a genuine interest in producing quality work. * Have most of the tools of the trade. * Operate and maintain (2) two machines with high standards of quality and quantity. * Operate and maintain ancillary equipment such as, loader(s) (bar loaders), autogage(s), metal cutting machine(s) and wash(s) (rinse, wash, rust inhibit) with high standards of quality and quantity. * Hand load and hand pack. * Remove, regrind, replace and adjust tools and holders. * Take full chip carts to processing area and bring empty chip carts back to machines. * Perform minor machine maintenance. (Planned Operator Maintenance and Preventive Maintenance) * Recognize problems, correct them and make recommendations on how to prevent them to your supervisor or support engineer. (Machine, Material, Tool) * Perform minor machine repairs and adjustments. * Have a thorough understanding of speeds, feeds and tooling. * Work with engineers and supervisor on layout improvements and changes. * Know how to set and adjust standard machine attachments without assistance. * Set-up basic jobs within a reasonable length of time without assistance. Set-up advanced jobs within a reasonable length of time with assistance. * Maintain proper documentation and communications to ensure efficient coordination between shifts and departments (e.g. quality, engineering, maintenance) * Orient when requested by supervisor. * Train when mutually agreed. * Lead when mutually agreed. * Comply with all Quality Management System procedures and work instructions. * Perform other related duties as requested by supervisor.

Job Description Job Title: Heavy Duty Technician Location: Rusiniak's Service Inc. 2210 Old Union Rd Cheektowaga, NY 14227 Position Type: Full-time We are seeking a skilled Heavy Duty Technician to join our team. The ideal candidate will have experience in diagnosing, repairing, and maintaining heavy duty vehicles and equipment such as trucks, buses, trailers, etc. Responsibilities: • Perform diagnostic tests on heavy duty vehicles and equipment to identify any issues or malfunctions, • Repair or replace faulty parts as needed, • Perform routine maintenance on vehicles and equipment, such as oil changes, tire rotations, and brake adjustments, • Test drive vehicles to ensure proper functioning after repairs, • Keep accurate records of all maintenance and repairs performed, • High school diploma or equivalent, • Minimum of 2 years of experience as a heavy duty technician, • Knowledge of diesel engines, hydraulics, and electrical systems, • Strong problem-solving skills and attention to detail, • Ability to work independently and as part of a team, • Valid driver's license and clean driving record, • DOT Physical, • 401(k), • 401(k) matching, • Dental insurance, • Employee discount, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Tuition reimbursement We are looking for both an in shop technician as well as a 24/7 road service technician. If interested in either, please reach out. If you have a passion for working on heavy duty vehicles and equipment, and possess the necessary skills and qualifications, we encourage you to apply for this position. Join our team and be a part of a dynamic and growing company.

Job Description Come join John W. Danforth Company, one of the largest mechanical contractors in the Northeast! We are seeking a hands-on, process-driven Manufacturing Operations Manager to lead our regional shop operations with a strong focus on efficiency, workflow optimization, and operational excellence. In this role, you will oversee fabrication, production planning, logistics, and shop performance while driving continuous improvement initiatives that enhance throughput, quality, safety, and cost control. You will partner closely with Project Managers, Purchasing, and QA/QC to ensure materials and fabricated components are delivered accurately and on schedule to support project success. Are you passionate about improving processes, optimizing workflow, and leading high-performing teams in a fast-paced fabrication environment? If so, we invite you to join our team. What We Offer: • Danforth invests in you and your future with employee engagement, team support, career development, and mentoring What We Ask of You: • Lead and coordinate all pipe, and sheet metal fabrication activities across regional shops, • Drive continuous improvement initiatives focused on efficiency, workflow optimization, and waste reduction, • Develop and implement master fabrication and production schedules to maximize throughput and on-time delivery, • Evaluate and improve shop processes, tooling, and layout to enhance productivity and accountability. Lead ROI studies for process and equipment purchases., • Ensure all work is performed in the safest manner possible, reinforcing a strong safety culture, • Participate in turnover, pre-construction, and project status meetings to maximize fabrication opportunities, • Collaborate with Project Managers, Purchasing, and QA/QC to align on certifications, communications, Internal SOP’s, contract and code requirements, • Oversee shop deliveries, drivers, and order accuracy to ensure reliable material flow to job sites, • Oversee management of shop inventory levels to ensure materials are available and ready to support project demands, • Oversee team responsible for deliveries, tools, and equipment, • Monitor key performance metrics and implement process improvements to reduce cost, improve quality, and increase efficiency, • Foster strong labor relations and continuously improve workforce productivity and engagement Experience & Competencies: • Bachelor’s degree in industrial, manufacturing, mechanical, or related field preferred but not required; equivalent practical experience will be considered, • Approximately 10 years of experience in mechanical shop fabrication, manufacturing, or industrial production environments, • Demonstrated success driving process improvement, workflow optimization, or Lean initiatives, • Strong understanding of pipe and sheet metal fabrication, procurement, and assembly, • Experience working with labor unions and improving labor relations and efficiencies, • Strong analytical, organizational, and leadership skills, • High level of integrity, professionalism, and continuous improvement mindset Danforth offers a competitive benefits package for eligible employees, including medical, dental, vision, life, disability, paid time off, and a 401(k) with company match. The estimated compensation range for this role is $80,000 - $110, 000, based on individual experience, qualifications, and location. John W. Danforth Company is an equal opportunity employer and is committed to a workplace free from discrimination.

Job DescriptionAbout the Opportunity FLUENT, in exclusive partnership with Connected New York, is excited to be hiring for positions at our new state-of-the-art cultivation facility in Buffalo, New York. These roles offer the opportunity to join FLUENT's growing team while being part of Connected's highly anticipated expansion into one of the country's most dynamic and fast-growing cannabis markets. About Connected Connected family of companies. are a leading vertically integrated cannabis company based in Sacramento, operating in California, Arizona, and Florida. With over 11 years of experience, Connected specializes in breeding, growing, manufacturing, and distributing top-shelf cannabis through its state-of-the-art facilities and proprietary genetics. With over 250 employees across the United States, Connected has built a strong industry reputation and is now expanding into New York through a master services agreement with FLUENT. Connected's mission has always been to breed, grow, and sell the best cannabis in the world, setting the highest standards for its products, people, and partners wherever we go. About the Job The Maintenance Supervisor is responsible for supervising and performing all maintenance and repair activities to machinery, equipment, and facility. This position will perform a variety of maintenance functions in and around the facility, which includes providing routine, emergency, and scheduled maintenance to the building and associated equipment. The Maintenance Supervisor will perform manual tasks and preventive maintenance and maintain the facility in top condition while managing and assisting others on the team. What You Will Do • Coordinate with management to schedule repairs and preventive maintenance of all AC units and dehumidifiers through the facility, • Inspect, repair machinery, and replace or install equipment such as fans, dehumidifiers, railings, lights, drives, doors, ramps and etc., • Keep records on preventive maintenance of all equipment, • Add proven improvement processes to all Preventative Maintenance and Turn schedule, • Arrange, assemble, install, and maintain irrigation systems and troubleshoot electrical issues., • Utilize, maintain, and repair power tools and mobile equipment., • Conduct daily visual Inspections inside and outside of the facility, • Basic plumbing repairs such as plugged sewer lines, urinals, commodes, faucets and water valve., • Assist with the operation and arrangement of sanitation area when needed., • Inspection of facilities and equipment to ensure company standards and safety regulations are being maintained., • Maintain a clean and organized work environment., • Maintain general facility maintenance and troubleshooting as necessary., • Establishes and implements policies and procedures to respond to facilities and safety-related issues., • Meets maintenance financial standards by providing annual budget information; monitoring expenditures; identifying variances; implementing corrective actions., • Direct supervision of maintenance staff. Indirectly supervises contracted cleaning staff., • Oversee adherence to compliance with health and safety standards and company policies and procedures). What We Are Looking For QUALIFICATIONS • High School diploma or GED equivalent, • Minimum of 2 years of supervision, • 3 years of general repair experience and building maintenance experience, • Knowledge of electrical, plumbing, HVAC, and building equipment., • Preferred EPA Certified, • Basic knowledge of computers and printers SKILLS • Skilled with tape measuring and other measuring tools, • Skilled in the safe use of power tools, wrenches, and other shop equipment, • Capable of operating Forklifts and scissor lifts, • Must be able to work independently with minimal direction and exercise independent judgment., • Demonstrate integrity and dedication and have a positive work attitude and strong work ethic., • Able to accurately follow multi-layered written/oral instructions., • Excellent communication skills and attention to detail with speed and accuracy., • Effective time- management and ability to multi-task, • Knowledge of Microsoft Office programs, including MS Outlook and Excel, • Strong organizational and leadership skills., • Ability to work in a fast-paced, changing, and challenging environment., • Self-driven, reliable, and hard-working This position supervises the Maintenance team. Compensation Description (annually): The salary range for this position in the selected city is $60,000.00 - $80,000.00 annually. Compensation may vary outside of this range depending on a number of factors, including a candidate's qualifications, skills, competencies and experience, and location. Physical Requirements/Workplace Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must be able to lift up to 50 lbs individually. This position also requires periods of standing, walking, bending, and other physical demands. Attention to detail is also very important in this position. Why Join Us? By joining FLUENT with Connected, you'll have the opportunity to: * Be part of Connected's highly anticipated entry into the New York market * Work with a team that combines Connected's proven genetics and brand strength with FLUENT's local expertise and cutting-edge cultivation facility * Help shape the future of premium cannabis in one of the country's most discerning markets Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent to this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instruction or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an "at-will" relationship. The company is an Equal Opportunity Employer, a drug free workplace, and complies with ADA regulations as applicable.

Job Description Job Title: Structural Engineer – Modular Steel Systems Location: Buffalo, NY Department: Engineering Reports To: Director of Engineering Employment Type: Full-Time | On-Site About GTI GTI is a rapidly growing manufacturer of mission-critical modular infrastructure, delivering high-quality steel-based structures for the energy, defense, and heavy industrial markets. With engineering and fabrication facilities in both Phoenix and Buffalo, GTI specializes in custom modular enclosures, containerized systems, and large-scale steel assemblies designed for deployment in extreme environments. Position Overview We are seeking a highly skilled Structural Engineer to join our engineering team and drive the design, analysis, and validation of modular steel structures. While experience in bridge or suspended structure design is highly valued, the core focus of this role is on modular fabrication, large welded assemblies, and containerized structures used in high-load industrial environments. This role requires a hands-on engineer who can translate concepts into production-ready designs, work closely with fabrication teams, and ensure structural integrity, safety, and code compliance. Key Responsibilities • Structural Design & Analysis, • Structural Engineer is responsible for designing modular steel structures, large welded assemblies, platforms, frames, and load-bearing systems for containerized and enclosure-based applications., • Perform structural analysis using FEA software and hand calculations to evaluate static and dynamic loads, fatigue, seismic, and wind loading., • Incorporate bridge engineering principles when applicable to long-span or suspended modular systems., • Engineering Documentation, • Develop engineering drawings, design reports, and complete technical documentation using SolidWorks, AutoCAD, and Revit/BIM tools., • Produce accurate bills of materials (BOMs), weld symbols, and fabrication-ready drawings., • Manufacturing Collaboration, • Partner with fabrication, quality, and project teams to ensure structural designs are optimized for manufacturability, cost efficiency, and internal capability., • Support shop drawing reviews, first article builds, and QA/QC testing for structural validation., • Field & Deployment Support, • Conduct site assessments, participate in installation support, and perform structural evaluations of deployed modular systems., • Compliance & Standards, • Ensure all designs comply with applicable structural codes and standards, including IBC, AISC, AWS D1.1, and applicable state regulations., • Bachelor’s degree in Civil, Structural, or Mechanical Engineering (Master’s preferred), • 5+ years of experience in structural design for steel structures, welded assemblies, or modular systems, • Proficiency with FEA tools (RISA, SAP2000, STAAD.Pro, or similar), • Experience with CAD platforms including SolidWorks and AutoCAD; familiarity with Revit or BIM tools preferred, • Strong understanding of structural design principles, welding/joint design, corrosion protection, and load path analysis, • Knowledge of relevant building codes and standards (IBC, AISC, AWS D1.1), • PE licensure or the ability to obtain within 12 months, • Experience in modular construction, container-based fabrication, or bridge design, • Familiarity with design-for-manufacturing principles and fabrication workflows, • Experience collaborating directly with manufacturing and field installation teams, • Shape the future of modular steel infrastructure and energy systems, • Competitive salary and comprehensive benefits package, • Collaborate across disciplines in a fast-paced, hands-on environment

Job Description Electrical Engineer This role is responsible for designing electrical schematics and control systems, supporting project execution, and ensuring accurate technical documentation. The position focuses on schematic and cabinet design and does not require PLC programming experience. Key Responsibilities • Design and develop electrical schematics using AutoCAD, • Create power cabinet layouts and specify electrical components, • Design control systems in accordance with project requirements, • Maintain and update electrical design documentation and CAD libraries, • Generate Bills of Material (BOM) from electrical drawings, • Prepare customer documentation and validation protocols, • Provide technical support to shop floor and field service teams, • Promote and adhere to Safety, Health, Environmental, and Quality (SHEQ) standards Qualifications • Bachelor’s degree in Electrical Engineering, • 3–5 years of experience in electrical design and engineering, • Proficiency in AutoCAD and electrical design software, • Experience developing electrical schematics and BOMs, • Knowledge of applicable codes and standards (NEC, IEC, NEN1010) Equal Opportunity Employer GCR provides equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, disability, or genetic information. GCR is an Equal Opportunity/Affirmative Action Employer committed to workforce diversity. Company DescriptionGCR Professional Services is an engineering and information technology staffing firm (direct-hire, consultants, contract-to-hire).GCR Professional Services is an engineering and information technology staffing firm (direct-hire, consultants, contract-to-hire).

Job DescriptionService Advisor Department: Service Reports To: Service Manager Overview The Service Advisor works proactively to ensure the daily operation of the service reception, and that other service needs and expectations are met, from customer inquiry through the completion of the invoice and follow-up. This work contributes to an optimized utilization of the service shop and long profitable relations with the customer. Benefits • Health Insurance, • 401(k) Retirement Plan, • Paid Time Off (PTO), • Competitive Wages, • Flexible Scheduling Key Responsibilities • Proactively generate and prioritize leads by reviewing repair history, analyzing diagnostics, contacting customers to recommend services, scheduling visits, and documenting outreach., • Drive service sales by assessing customer needs, recommending maintenance, troubleshooting, defining required work, creating work orders, and coordinating scheduling., • Maximize shop efficiency by planning work time, coordinating resources, arranging vendor jobs, confirming appointments with customers, and actively participating in pulse and service management meetings., • Ensure a positive customer experience by welcoming customers, verifying appointments, performing inspections, addressing requests, offering additional services, and maintaining communication on changes or issues., • Build long-term customer relationships by clearly reviewing completed work, explaining deferred recommendations, suggesting future services, closing work orders, issuing invoices, booking follow-up appointments, returning the vehicle, and capturing customer feedback., • Foster a positive and collaborative service department culture by embracing diversity, promoting teamwork and accountability, protecting confidentiality, pursuing ongoing professional development, and contributing to business goals through active project participation and knowledge sharing. General Knowledge and Skills You Need • Apply business acumen to understand operational processes and drive improved service performance and profitability., • Maintain up-to-date product knowledge of International and IC Bus products and services to effectively support customer needs and business processes., • Uphold safety and health standards by following policies and procedures to ensure a safe, compliant, and sustainable work environment for all employees., • Utilize software and information technology effectively to perform daily tasks and support service operations., • Communicate openly and respectfully with all stakeholders, fostering two-way dialogue, building consensus, and promoting clear, honest interactions., • Deliver exceptional service by maintaining strong client relationships and consistently meeting the needs of internal and external customers., • Take initiative and drive solutions by addressing issues proactively and seizing opportunities., • Plan and prioritize effectively to achieve organizational goals through efficient resource allocation., • Identify and resolve issues efficiently, escalating complex problems as needed., • Collaborate proactively to support a cohesive work environment and achieve shared goals. Desired Education & Experience • High school education or equivalent, • Relevant work experiences in a dealership position recommended

Job DescriptionCompany Description The Tile Shop is NOW HIRING a FULL TIME and IN-STORE Warehouse Manager. The In-Store Warehouse Manager is responsible for: • Helping oversee the warehouse at the store itself., • Preparing packing and shipping documents., • Picking and staging outbound shipments., • Ensuring inbound & outbound shipments are accurate & damage-free., • Read customer orders, work orders, shipping order, or requisition to assemble customer orders from stock and place order on pallet or shelves., • Sort and place materials or items on racks, shelves, or in bins according to predetermined sequence such as size, type, style, color, or product code., • Complete all paperwork pertaining to inventory, which includes shipping confirmations, receiving confirmations, purchase orders, open orders, order check-off, and UPS., • Ensure complete accuracy of store inventory at all times., • Label all orders and back stock clearly., • Participate in the cycle counting program., • Load and unload customer vehicles; ensure proper paperwork is completed and signed off by the customer after loading of product., • Process incoming freight trucks in a timely manner., • Proper use of equipment, including but not limited to forklifts, to move inventory., • Inspect equipment to maintain good working order., • Record amounts of product received and distributed., • Accountable for overall cleanliness/organization of the warehouse., • Enter records into computer., • Other duties as assigned.Qualifications, • High School Diploma, • Ability to read and write in English, • Strong work ethic, • Forklift certification or willing to be certified, • Excellent organizational skills, • Basic mathematical skills, • Basic computer skills, • Knowledge of proper safety measures, • Ability to manually move and lift 50lbs regularly and up to 100 lbs Additional Information At The Tile Shop, we are committed to developing the WHOLE you, not just the WORK you. Our benefits program is our investment in you as an important contributor to our success, and we are proud of our highly competitive package. • Competitive Pay with Unlimited Earning Potential, • Individual Career Growth Opportunities & Excellent Training, • Competitive & Comprehensive Benefit Package, • HSA Employer Contributions, • 401(k) Plan with employer matching

Job DescriptionDescription: Ferguson Electric’s Electrical Engineer II is a mid-level position for engineers focusing on becoming self-sufficient on design and engineering tasks. This position will contribute to the electrical system design, engineering, commissioning and construction efforts for commercial and industrial projects, including healthcare, education, research, commercial facilities, and utilities. This role involves supporting project design teams, developing innovative electrical solutions, and ensuring compliance with applicable codes and standards. The Electrical Engineer II role will provide guidance to junior staff as needed, assist in managing project deliverables, and support the company’s commitment to quality, safety, and client satisfaction while upholding Ferguson Electric’s core values. RESPONSIBILITIES • Electrical Systems Design:, • Design of electrical systems, including power distribution, lighting, fire alarm, and communication systems, for commercial and industrial projects., • Support the development of project design goals, specifications, and strategies to meet client requirements and project objectives., • Participate in quality control reviews of engineering documents to learn about accuracy and compliance with project requirements., • Help ensure designs comply with applicable codes (e.g., NFPA, IEEE) and industry standards., • Electrical Systems Analysis and Field Support:, • Help specify electrical equipment, components, and materials, ensuring compatibility with project needs and budgets under supervision., • Perform engineering studies, such as load analysis, short-circuit, and coordination and arc flash, using tools like SKM or Easypower with minimal supervision., • Review of submittals, shop drawings, and other construction documents to ensure they are meeting the project requirements., • Develop relay, transformer, breaker and battery testing plans and reports with minimal experience., • Develop relay programs with minimal guidance., • Support service technicians with troubleshooting customer electrical system problems under the guidance of higher-level engineers., • Project Leadership:, • Support the coordination of electrical engineering aspects of projects, helping adhere to budgets, schedules, and quality standards., • Participate in project team and client meetings to align on project scope, progress, and deliverables., • Assist in the preparation of construction documents, including drawings and specifications., • Site Engagement:, • Participate in job site visits to observe existing conditions, monitor construction progress, and learn about compliance with design specifications., • Attend construction meetings and provide basic technical support to field teams and subcontractors as needed., • Perform physical walk-throughs of sites under supervision to assess conditions and resolve issues., • Process Improvement:, • Contribute to strategies to improve design quality, coordination, and efficiency in production efforts., • Support the incorporation of renewable and sustainable design practices where applicable to enhance project outcomes. Requirements: ABOUT YOUR QUALIFICATIONS • Education and Experience:, • Bachelor’s degree in Electrical Engineering or Architectural Engineering from an ABET-accredited program required and preferred with electrical systems focus., • 4-6 years of experience in electrical engineering, with a focus on commercial or industrial projects., • Engineer-in-Training (EIT) certification is required or additional 5 years of experience directly related to the job responsibilities., • Technical Skills:, • Strong proficiency with Microsoft Office Suite (Word, Excel, Outlook) for documentation and reporting., • Proficiency in drawing software (e.g. Revit and AutoCAD) and electrical analysis software (e.g., SKM) is preferred., • Good understanding of designing power distribution, lighting, and communication systems per NEC, IEEE and other relevant codes is preferred., • Ability to read and understand construction drawings and specifications., • Basic understanding and knowledge of electrical system installation methods and standards., • Exposure to renewable energy systems or sustainable design practices is a plus., • Soft Skills:, • Strong problem-solving skills and ability to work on multiple tasks., • Good leadership and mentorship skills to contribute to team efforts., • Good communication and interpersonal skills to collaborate with clients, contractors, and internal teams., • Organizational and time management skills to handle tasks and meet deadlines., • Ability to adapt to an adjusted work schedule, including occasional overtime or evening/weekend hours, to meet project demands., • Willingness to accept constructive feedback and make changes as necessary to improve job performance., • Willingness to learn and develop skills in various engineering tasks, software, and equipment., • Other Requirements:, • Ability to conduct physical site walk-throughs and work in various environmental conditions., • Participate in in-house and manufacturer training to enhance skills.

Job DescriptionDescription: Carrier Process Equipment Group (CPEG) offers customers a comprehensive line of large industrial processing equipment for a wide variety of industries. By combining engineering expertise including high tolerance fabrication and assembly, we design and manufacture custom bulk processing equipment solutions. Please visit us at to see the full scale of our product lines and solutions including the diverse family of brands who make up our portfolio. We are looking for a full-time CNC Plasma & Water Jet Operator at our Riverview Blvd location in Tonawanda NY. This is an onsite position that is responsible for the efficient setup, operation, and maintenance of CNC plasma and waterjet cutting machines. This role involves setting up the machine, performing routine maintenance, operating cranes and forklifts to move materials, assisting with material inventory audits, and ensuring the quality of the cut products. Job responsibilities: • Machine Setup & Operation: Calibrate and operate CNC plasma and waterjet machines., • Technical Reading: Interpret blueprints, technical drawings and job specifications., • Maintenance: Perform routine maintenance, troubleshoot issues and clean machines., • Material Handling: Load and unload raw materials using overhead cranes or forklifts., • Quality Control: Inspect finished parts for accuracy, ensuring they meet strict tolerances. Verify correct quantity of parts are produced., • Safety & Compliance: Maintain a clean work environment, adhere to safety procedures and use appropriate PPE., • Helps identify new and better processesRequirements:, • 3+ years of experience in a manufacturing environment operating plasma/waterjet/ laser machinery., • Understanding of material types, grades and marking requirements., • Ability to perform basic shop math including addition, subtraction and conversions of decimals to fractions/ fractions to decimals., • Proficient in using precision measuring tools and equipment including tape measures, calipers and micrometers., • Prior experience working with ASME standards for processing materials., • Use of AutoCAD software, CAD/CAM software., • Machine programming experience., • Messer or Flow machine brand experience., • CNC Press brake experience., • Plate roll experience. Competitive Benefits • Generous paid time off as well as 80 hours of holiday pay each year., • Ability to become an Employee Owner. This benefit is fully funded by the company—no employee contribution required—and builds value for you over time based on the company's performance. While results vary from year to year, the ESOP consistently delivers retirement benefits that exceed those of a typical 401(k) match., • Medical, Dental, and Vision Insurance. We provide a company contribution with Health Savings Account (HSA) participation. Flexible Spending Accounts (FSAs) are also available for healthcare and dependent care expenses, regardless of whether you are enrolled in a company medical plan., • Company paid Basic Life Insurance, Accidental Death & Dismemberment (AD&D), and Long-Term Disability coverage, along with supplemental Short-Term Disability coverage (company pays 50% of premium)., • Voluntary coverages such as additional life insurance, accident insurance and more., • Employee Assistance Program. Our EAP offers free, confidential support including legal and financial consultations, counseling services, estate planning, travel assistance, and work-life resources such as childcare, eldercare, and health advocacy., • Employee Referral Program bonus., • Educational Assistance., • Career Advancement. CPEG is 100% employee-owned and led by a dynamic executive team of talented individuals who have risen through the management structure., • Option to contribute to a 401(k) plan with flexible loan feature—invest in your future while keeping access to your funds if you need them. *The salary range indicated in this posting represents the minimum and maximum of the salary range for this position. Actual salary will vary depending on factors including, but not limited to, budget available, prior experience, knowledge, skill and education as they relate to the position’s qualifications, in addition to internal equity. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays.

Job DescriptionCompany Description manufacturing company Job Description Operations Manager needed for a unionized plant. Working in a 24/7 manufacturing environment, you will develop goals and processes for operations improvement. You must have operations experience in manufacturing in order to qualify. This job is located in New York's southern tier area, near Binghamton. • Your goal in running the organization will be to produce high quality products, manage increased volumes, and optimize facility, equipment, and manpower performance., • You will manage the performance of manufacturing, engineering, materials, quality, IT, human resources, and finance, ensuring that business and cost targets are met. Provide leadership for employee development, process ownership, and accountability., • Align objectives within each function to achieve the business strategic goals.; including safety, quality, reliability, productivity, and people development., • Understand and ensure all regulatory compliance standards are met., • Ensure that technical objectives are met and any roadblocks or issues are quickly resolved.Qualifications Bachelor’s degree in Engineering or Manufacturing equivalent. • Requires manufacturing experience of 7 plus years with 5 years operations leadership., • Experience in change management, process improvement and optimization., • Able to lead in a way that builds trust with people in all departments from the shop floor to the executive offices., • Should be accessible 24/7 and holidays to support facility as needed. Additional Information Pearl Martin, Image Associates Inc. pearl AT jobspot DOT com Please look me up on LinkedIn, and send me an invitation to Link:

Job Description Power Drives, Inc. is a Buffalo‑based manufacturer specializing in custom‑engineered hose, tube, and fluid conveyance systems for a wide range of industrial and mobile equipment applications. Founded in 1946, PDI is known for delivering high‑quality, reliable solutions backed by strong engineering expertise and decades of industry experience. Objective Programs computer numerical controlled (CNC) machinery that automatically mills, punches, frills, broaches, or beams metals parts. Schedule 7:00 AM- 5:30 PM Monday- Thursday Minimum Requirements • Associates Degree in Engineering Technology (or related field), or relevant experience required, • 5 years machine stop experience that includes machine programmingJob Requirements, • Self-motivated with the ability to work independently with minimal follow up supervision, • Observant, attentive to detail, and quality conscious, • Above average math, reasoning, and problem-solving skills, • Practical experience with machine shop metal working machinery, • Practical experience with precision measuring devices such as calipers and micrometers, • Practical experience with CNC machine programming, capable of using conventional and G Code Mill controllersEssential Duties and Responsibilities, • Build machined precision components and assembles as assigned, • Make adjustments to machine to adhere to established specifications or to correct faulty programming, • Consult product or project blueprints and technical data sheets as required, • Conceptualized and design production parts or other machines components, • Make general decisions as to quality, tolerances, and operation sequences, • Review, organize, and prioritize manufacturing steps for all assigned projects, • Specify and secure materials required for projects, or forward requests for required materials to the Design Engineer for acquisition, • Verify that all products conform to customer or company expectations for fit, form, and function, • Perform detailed quality inspections as required to ensure production meets expectations, • Perform all paperwork and documentation as required, • Perform preventative equipment maintenance as assigned, • Participated in problem solving or customer complaint resolution efforts, • Inform supervisor of all equipment, processes, materials, blueprints, safety, and quality concerns, • Participated in daily area clean up and more significant facility clean-up efforts, • Adhere to all company policies, procedures, and workplace practices, • Accept reassignment to other areas or departments as workload dictates Employees have the opportunity to receive monthly performance incentive! 2026 Buffalo's Business First Best Places To Work Finalist

Job Description Join a team that nourishes life from farm to table! Upstate Niagara Cooperative, proudly owned by 200+ local family farms, is one of America’s largest and most stable dairy cooperatives. Guided by farmer- and employee-led values, we process and market high-quality milk, yogurt, dips, sour cream, cottage cheese, and more under our trusted brands: Upstate Farms®, Bison®, Milk for Life®, and Intense Milk®. Here, you’ll support sustainable farming, strong communities, and the mission to deliver fresh, local dairy to families every day. Hours: 2nd Shift M-F (3pm-11:30pm) Position Summary The Parts Room Coordinator plays a critical role within the Maintenance Department by supporting equipment reliability and plant operations through effective maintenance purchasing and spare parts inventory management. This position is responsible for high-volume, time-sensitive maintenance transactions, including requisition processing, part identification, supplier coordination, and cycle counting. Serving as a key link between maintenance, purchasing, and suppliers, the role ensures efficient workflows, cost control, and accurate inventory management. This position directly supports: • Equipment uptime, • Preventative maintenance compliance, • Inventory accuracy and material availability Maintenance Purchasing Execution • Process and manage purchase requisitions for maintenance parts and services, • Source and identify correct parts with accurate specifications, • Coordinate with vendors on pricing, availability, and lead times, • Expedite critical orders to support urgent maintenance needs, • Maintain accurate inventory levels for maintenance-critical spare parts, • Own and execute the cycle counting program to ensure inventory accuracy, • Investigate and resolve inventory discrepancies, • Ensure proper part labeling, storage, and organization, • Work with approved suppliers to ensure dependable supply and service, • Obtain competitive quotes when applicable, • Support bid best practices, including:, • Competitive bidding when lead time allows, • Price validation against historical spend, • Use of approved vendors, • Serve as the primary point of contact for maintenance-related parts needs, • Ensure parts availability for:, • Corrective maintenance, • Preventative maintenance, • Planned shutdowns, • Maintain accurate data in CMMS/ERP systems (parts, pricing, and vendor information), • Track purchase order status and delivery timelines, • Maintain purchasing documentation for compliance and audits, • Support reporting related to:, • Stockouts, • Expedited orders, • Reduced stockouts and improved parts availability, • Accurate inventory with consistent cycle count completion, • Lower expedite rates and reduced premium freight costs, • Fast, accurate purchasing cycle times, • Strong vendor relationships and responsiveness, • High school diploma or equivalent (Associate’s degree or technical background preferred), • Minimum of 2 years of experience in a purchasing, inventory, or maintenance support role, • Strong mechanical aptitude with the ability to identify maintenance parts, • Experience with CMMS, ERP, or inventory management systems, • Experience in a manufacturing or food/dairy environment, • Familiarity with maintenance parts such as motors, bearings, valves, and pneumatics, • Knowledge of MRO (Maintenance, Repair, and Operations) inventory practices, • Attention to Detail – Accuracy in part identification and inventory management, • Urgency & Execution – Ability to support fast-paced maintenance demands, • Organization – Strong discipline in inventory control and documentation, • Communication – Clear and effective coordination with maintenance teams and suppliers, • Combination of office and shop-floor environment, • Frequent interaction with maintenance personnel and external vendors, • The salary range listed for this position represents the good faith and reasonable minimum and maximum pay for this role at the time of posting. Actual compensation may vary based on factors including, but not limited to, experience, skills, training, knowledge, education, and overall qualifications. The posted salary range reflects just one component of our total rewards package. Other components of the total rewards package may include participation in group health and/or dental insurance, retirement plan, wellness program, paid time away from work, and paid holidays. Upstate Niagara Cooperative, Inc. is committed to equal employment opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

Job DescriptionSenior Manufacturing Engineer – 5-Axis CNC Milling Buffalo, NY (Onsite) $115K – $145K + Full Benefits + Relocation Assistance Build the Future of Aerospace Manufacturing We are recruiting on behalf of our client for a Senior Manufacturing Engineer to support advanced aerospace component production within a complex milling (prismatic) environment. This is a high-impact, hands-on role where you'll lead manufacturing process development, optimize production, and work directly with 5-axis CNC machining to drive precision and performance. If you thrive in a technical, shop-floor-driven environment and enjoy solving complex manufacturing challenges—this is an outstanding opportunity. What You'll Do: • Lead manufacturing process development for new aerospace components, • Drive Design for Manufacturing (DFM) initiatives, • Develop and prove out:, • CNC programs (5-axis), • Operation sequences, • Tooling and work holding strategies, • Detailed work instructions, • Support and improve existing production processes through hands-on shop engagement, • Estimate:, • Time standards, • Labor requirements, • Cost and production efficiency, • Evaluate and implement new manufacturing technologies and capital equipment, • Collaborate with engineering, operations, quality, and suppliers to resolve issues, • Support automated manufacturing cells to improve efficiency and reduce variability, • Lead projects and potentially own the engineering function for a manufacturing cell What You Bring:, • Strong expertise in 5-axis CNC milling programming (CAD/CAM), • NX experience preferred, • End-to-end manufacturing process experience (raw material finished product), • Hands-on machining experience (setup and operation), • Experience with materials such as:, • Aluminum, • Titanium, • Stainless steel, • Strong knowledge of:, • Cutting tools, • Work holding, • Fixture design, • Project leadership experience, • Strong communication and documentation skills What Makes You Successful:, • Deep technical problem-solving in machining environments, • Ability to bridge engineering and shop floor execution, • Continuous improvement mindset, • Strong collaboration across cross-functional teams Why This Opportunity?, • Competitive salary + strong benefits package, • Relocation assistance available, • Work on cutting-edge aerospace components, • High visibility, high-impact role, • Opportunities for leadership and technical growth, • Stable, long-term manufacturing environment Important Notes:, • Onsite role in Buffalo, NY #ManufacturingEngineer #CNC #5AxisMachining #CNCMachining #CADCAM #NXCAM #AerospaceJobs #AerospaceEngineering #PrecisionMachining #LeanManufacturing #DFM #ContinuousImprovement #EngineeringJobs #BuffaloNYJobs #NewYorkJobs #NowHiring #Machining #AdvancedManufacturing #SkilledTrades #CareerOpportunity

Job DescriptionLocated in Tonawanda, NY Salary: $21/hr Express Employment Professionals is seeking a Paint Department Team Member for a local manufacturing company looking to add reliable talent to their production team. This role supports daily paint-line operations and plays a key part in preparing, finishing, and packaging hydraulic cylinders for shipment. Shift: Monday - Friday 7:00am-3:30pm Payrate: $21/hr Key Responsibilities • Prep cylinders for painting, mix primer/paint, and clean finished cylinders, • Remove freshly painted cylinders from the paint line and place them into bags or containers per customer specifications, • Package completed cylinders, ensuring proper weight distribution and secure placement, • Cut wood stock using a circular saw to create supports for pallets and shipments, • Secure products using shrink wrap, wood bracing, and metal banding, • Apply shipping labels and verify accuracy against paperwork, • Move packaged materials using a pallet jack to staging or loading areas, • Load finished products onto trucks for shipment, • Ability to work independently and as part of a team, • Strong attention to detail and quality, • Ability to read and understand blueprints, • Experience with paint or paint-line operations is a plus, • Comfortable using hand and power tools, • Basic shop math skills, • Ability to lift up to 40 lbs #2521LI Express Office: Buffalo 3140 Sheridan Drive Suite 2 Amherst, NY 14226

Job Description Position Summary The Electrical Design Specialist is responsible for developing electrical wiring and interconnection documentation for industrial control and instrumentation systems after device selection and system architecture have been established by the project team. This role applies applicable electrical codes, client specifications, and industry standards to produce practical, compliant designs that support procurement, fabrication, and installation activities within a collaborative environment. This position works collaboratively across sales, engineering, procurement, and shop operations and may provide hands-on technical support and installation guidance as needed to meet project objectives. Key Responsibilities • Create one-line electrical wiring diagrams, interconnection drawings between instrumentation and terminal blocks, termination schedules, and cable schedules for control and instrumentation systems., • Develop wiring diagrams, junction box layout drawings, conduit/cable routing drawings, and electrical bills of material (BOMs) for customer submittals and internal manufacturing., • Assist marketing staff with quotations as needed., • Generate work instructions for installation of the electrical scope of supply., • Interpret and apply NEC, CSA, and ATEX requirements; client electrical specifications; and project-specific standards, with an emphasis on oil & gas and industrial facilities., • Select electrical interconnecting components, including:, • Wire and cable types, • Conduit systems and fittings, • Cable tray systems and routing concepts, • Cable glands, entry devices, and sealing systems, • Junction boxes and related accessories, • Review project documentation to ensure compliance with electrical codes, hazardous area requirements, and client preferences., • Develop bills of material (BOMs) for approval of items used in build and procurement of electrical components once client has approved., • Support shop fabrication and field installation activities by providing technical direction, clarification, and oversight as required., • Create inquiries to sub-suppliers for component selection and/or costing., • Perform installation reviews to verify conformance with drawings, specifications, and code requirements., • Manage order placement, expediting, and shipping coordination for all required electrical components., • Collaborate with project engineers, electricians, and other disciplines to efficiently resolve design and installation issues., • Maintain accurate project documentation, drawing revisions, and change records. Required Qualifications • Associate degree, technical diploma, or equivalent experience in electrical technology, industrial controls, or a related field., • Proven experience creating electrical wiring and interconnection drawings for industrial control systems., • Strong working knowledge of the National Electrical Code (NEC)., • Experience interpreting and applying client electrical specifications, preferably in oil & gas or heavy industrial environments., • Practical understanding of conduit systems, cable tray routing, and cable gland selection., • Ability to work across multiple functions in a collaborative team-based environment., • Exceptional customer-facing communication skills, with the ability to communicate clearly and professionally with clients, suppliers, and internal teams both verbally and in writing., • Experience working on large-scale, complex, and innovative projects, with the ability to review and apply project specifications., • Schedule-oriented, with strong multitasking skills and the ability to manage and execute multiple projects at various stages simultaneously., • Excellent judgment and decision-making skills; solution-oriented with the ability to resolve escalated issues., • Ability to comprehend customer requirements and make appropriate recommendations and briefings; capable of troubleshooting, testing, diagnosing errors or technical problems, and determining cost-effective solutions. Preferred Qualifications • Experience supporting manufacturing or system integration facilities., • Prior hands-on experience with electrical installation or field work., • Familiarity with electrical components used in industrial and hazardous area applications, including but not limited to conduit, cable tray, glands, terminal boxes, purge alarms, wiring and insulation types, and HOA switches., • Familiarity with oil & gas, petrochemical, or industrial facility standards., • Experience with electrical design software such as AutoCAD or similar tools.

Job Description Position Summary API Heat Transfer is looking for individuals who enjoy being part of transformation. With a renewed mission, new leadership, and acceleration toward Lean Cultural Change, our Operations Team is on its way to becoming a Lean Management powerhouse. The Quality Inspector plays a critical role in ensuring products meet contractual, regulatory, and quality standards. This position supports our commitment to excellence by inspecting, documenting, and validating work throughout the manufacturing and final shipment processes. At API, we take our culture transformation seriously. To help ensure the best fit for both the individual and our organization, candidates are asked to complete a 10‑minute Culture Index Survey after submitting their application. This allows interview time to focus more deeply on job behaviors and work history. Culture Index Survey: What You Will Do Inspection & Quality Assurance • Inspect units for cleanliness, documented release for assembly, weld appearance, and bundle insertion accuracy., • Verify compliance with contract requirements and record heat numbers during final assembly., • Perform final dimensional inspections of completed vessels., • Inspect final shipping preparations and apply green tags when acceptable., • Review contract documents and prepare TCR/contract requirement lists., • Inspect and witness hydrostatic testing of ASME units., • Prepare and sign ASME data reports (U‑1s, U‑2s)., • Inspect oxygen cleaning activities as required., • Prepare and enter rejection reports as needed., • Process MTRs and document packages., • Prepare contract folders for Authorized Inspector (AI) review., • Inspect alignment and dimensional accuracy of components prior to welding., • Verify and document trace code markings of materials., • Monitor, document, and verify welder performance testing, qualifications, and stamping., • Inspect parts for final release in the grind shop., • Complete Welder Continuity Logs bi‑monthly and forward to the Team Leader or Quality Manager., • Calibrate measuring and test equipment., • Work with customer inspectors as required., • High School diploma or equivalent., • Minimum of two (2) years of Quality Control experience., • Previous experience in a manufacturing environment., • Experience preparing and working with detailed technical documentation., • Experience with non‑destructive examination (NDE); certified VT and/or PT Level I., • Ability to lift and move products up to 50 lbs and operate overhead cranes., • Strong mechanical aptitude., • Basic geometry, algebra, mathematics, and report‑writing skills., • Familiarity with fabrication drawings, welding processes, and NDE methods., • Ability to work independently with minimal direction while prioritizing daily tasks., • Associate’s degree or higher., • Experience working in a union environment., • Certified VT and/or PT Level II., • Knowledge of ASME Section VIII, Division 1.Key Skills, • Quality inspection and documentation, • ASME Code compliance, • NDE processes, • Attention to detail, • Technical documentation and reporting, • Cross‑functional communication, • Mechanical aptitudePhysical Requirements, • Ability to work in a manufacturing environment., • Ability to lift and move items up to 50 lbs., • Ability to operate overhead cranes safely., • Ability to stand, walk, and inspect equipment for extended periods., • Ability to wear required personal protective equipment (PPE).What We Offer You, • Be part of leading‑edge technology in the heat transfer industry, • Career development and advancement opportunities, • Exposure to multi‑site, global operations, • Ability to impact customers across multiple industries, • Full health & welfare benefits, 401(k), and Paid Time Off (PTO) INDZ

Job Description Our company is looking for a Parts Sales Associate to join our team. Some experience needed, but not necessary. Willing to train! Responsibilities: * • Maintain clean and professional appearance of counter, work area,, • Maintain parts in appropriate storage areas;, • Receive and process payments;, • Read and understand the parts catalog when looking up and speaking to specific parts;, • Provide high level service to both internal and external customers;, • Answer phone calls, provide price quotes and other information to customers;, • Converse effectively/efficiently regarding customer parts status;, • Receive payment from retail customers or obtains credit authorization;, • Notify parts manager of out-of-stock parts or shop materials that need immediate attention;, • Valid driver’s license and clean driving record;, • Prompt and courteous demeanor;, • Strong communication skills;, • Positive and hardworking personality;, • Eagerness to improve;, • Strong interpersonal and time management skills;, • Ability to calculate figures/amounts including; discounts, interest, commissions, proportions, %, area, circumference, and volume;, • Eager to improve in a dynamic work environment;, • Ability to read/interpret safety and maintenance documents.Company DescriptionWe are an equal opportunity employer, locally owned and operated. We are are a Father/Daughter Team, been in business 50 years this past June, and we are not going anywhere.We are an equal opportunity employer, locally owned and operated. We are are a Father/Daughter Team, been in business 50 years this past June, and we are not going anywhere.

Job Description Local mechanical systems manufacturer in N Tonawanda, NY looking for a skilled CNC Machinist!! 1st shift hours 7:30am-4pm Mon-Fri + OT Pay varies based on experience - $25-40/hr Direct hire opportunity Please reply with resume for immediate consideration!! REQUIREMENTS: • 2-3 years setup & operation experience of large vertical turning centers and smaller mills/lathes, • Experience writing and coding programs preferred but not required, • 3-5 years relevant experience (experience in “job shop” environment preferred), • Ability to read/interpret engineered drawings and willingness to interface with engineering department, • Must be proficient with measuring equipment, • Strong mechanical aptitude & math skills required, • Program mills or lathes by building & entering instructions (code), including all aspects of job set-up, calculations, tools, operating parameters and dimensional validation., • Verify settings by measuring positions, first-run part, and sample workpieces; adhering to appropriate standards, • Maintain specifications by observing process & part quality; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes., • Perform set-up and tear down/clean-up of machining centers., • Utilize measuring devices – including but not limited to micrometers, calipers, tape measure, scales, etc., • Perform pre and post-machining inspections to verify critical fabrication or material tolerance requirements., • Follow all lawful employer safety and health rules and regulations, and wear or use required protective equipment while working. Report hazardous conditions to the employer. Report any job-related injury or illness to the employer, and seek treatment promptly.Company DescriptionAt APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. When APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions. Our branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.At APS we're your down-to-earth, hometown staffing team. We live here. We work here. We understand the business climate. And we know how to connect qualified and reliable talent with the Western New York companies that need them. \r\n\r\nWhen APS was established in Buffalo, NY in 1998, our firm initially focused solely on staffing light industrial positions. Over time, our reputation for quality placements grew, and thus so did the demand for our services. As a result, we expanded our services to include staffing for skilled trades, administrative, it/technical, engineering, and managerial positions.\r\n\r\nOur branch is located in Kenmore, and services a wide area within Buffalo and surrounding areas throughout the North and South Towns.

Job DescriptionDescription EditQualifications:· Applicant must have an honest work ethic. Duties to include sewer and drain cleaning, hot water tank and sump pump installation, repair and replacement of faucets, toilets and shower valves. Soldering, ProPress, Gastite. Must be able to work independently. Ability to perform any and all residential and light commercial plumbing issues and repairs.· You will diagnose and repair plumbing issues and lead customers to informed and confident buying decisions,· Able to accurately communicate with customer their plumbing issues, and a resolution to solve the issue· Can sympathize and build trust with homeowner· Well Organized and able to restock van/shop when needed Responsibilities:· Typical work day is 7:30-4:00, No weekends, no on call· You will be the face of Ando Plumbing when you arrive at the customers home, and we pride ourselves on honest, dependable service. You will be diagnosing various plumbing issues, and providing the customer with a variety of solutions to either fix their issue or upgrade their existing systems to add value to the residence. · Take detailed note of your work, with before and after pictures with written statement of what work was performed.· Communicating with customer throughout the entire job process: from stepping in the door to leaving the driveway. Making sure the customer is well informed of their issue and how you will resolve it for them so they feel comfortable letting us work on their home, knowing we are there to help and are respectful. Benefits:· $30 -$40 Hr base pay with substantial added bonuses· Paid Health Insurance· Company Uniforms· Holiday, Vacation, and Sick pay· Small work environment that’s family owned and operated, and will respect you as not only employees, but as a member of the Jim Ando Plumbing family· We are in the process of growing and expanding, and with that comes a lot of learning. If you have any comments, concerns, or complaints we are all ears E04JI800th744072xlg

Job Description PAY RANGE: $20-21/HOUR SCHEDULE: 9:00-5:00 MONDAY- FRIDAY Ready to Power Up Your Career? ???? ????️ ⚙️ Power Drives is hiring a Counter Person for our retail store. If you’re mechanically inclined and thrive in customer-facing roles, this is your opportunity to grow your skills, learn the industry, and build a long-term career. This role offers hands-on experience, daily problem-solving, and real potential for advancement. Let’s get you moving forward! About the Role: The Counter Person plays a vital role in serving as the primary point of contact for customers at our retail locations in Buffalo and Tonawanda, NY. This position is responsible for managing customer inquiries, processing orders, and providing product information. The Counter Person will maintain organized inventory records and assist in stock management to support overall business objectives. By delivering exceptional customer service and maintaining a professional demeanor, this role contributes directly to customer satisfaction and repeat business. Minimum Qualifications: • High school diploma or equivalent., • Previous experience in a customer service or retail role., • Basic proficiency with Microsoft OFFICE (Word, Outlook, Teams, Excel)., • Clean driving record., • Greet and assist customers by addressing their needs and inquiries., • Become an expert on our product line and offer creative solutions to meet customer needs, provide recommendations and suggestions for other products., • Maintain accurate records of inventory levels, sales transactions, and customer interactions., • Coordinate with warehouse staff to ensure timely order fulfillment and stock replenishment., • Prepare sales and work orders., • Work directly with the customers to identify the type of hose and fittings they need, cut, fit and assemble hose and fittings, and inspect completed assemblies., • Maintain general work area and shop equipment in a clean, neat, and safe manner., • Use a variety of hand tools (wrench, hammer, handsaw, power drill, calipers) and shop equipment (hose crimp machine, reusable hose assembly equipment, hose cut off saw, grinder, forklift, hydraulic shop press)., • Location will report to both Tonawanda and Buffalo sites. Currently expected to be 2 or 3 days per week at each location (Depending on business need). The required skills such as customer service and communication are essential for engaging with customers effectively and ensuring their needs are met promptly. Organizational skills help in managing inventory records and keeping the counter area orderly, which supports operational efficiency. Problem-solving and multitasking skills enable the Counter Person to handle unexpected issues and maintain smooth workflow across multiple retail locations. Physical requirements: Candidates must be comfortable with repetitive tasks, heavy lifting (up to 40 lbs.), standing for a long period of time, bending, twisting, pushing, pulling and working in a fast-paced production setting.

Job Description Capital Fence is looking for a hard-working, driven employee that is willing to grow with us. Vacation & personal time, 401K match, bonuses, health & dental insurance. Job Duties: • Loading trucks by hand and using equipment, • Picking & packing orders, • Shipping & receiving, • Organizing and cleaning warehouse Full-Time Hours: 8:00am - 4:30pm (Ability to work long hours if needed) Forklift, fence, and welding experience preffered but not required. Must be willing to learn welding at some point. Must be able to lift heavy objects.

Job DescriptionJob Title: Production Associate Job Description The Paint Line Worker role involves supporting a high-volume manufacturing paint operation in a hands-on, fast-paced setting. The position requires consistent physical activity and attention to detail. The Paint Line Worker is responsible for preparing, hanging, painting flow, labeling, and packaging hydraulic cylinders to meet increased production demand. Responsibilities • Prepare hydraulic cylinders for the paint line by cleaning, staging, and inspecting parts., • Hang and remove cylinders from the paint line using proper techniques and assist-lift equipment., • Palletize and depalletize finished products., • Apply stickers and labels accurately according to work orders., • Package and pack completed cylinders for shipment., • Read, follow, and verify work orders to ensure correct processing., • Maintain a steady workflow in a fast-paced production environment., • Follow all safety, quality, and production standards.Essential Skills, • Ability to perform repetitive lifting up to 50 lbs throughout the shift., • Comfortable working in a physically demanding, fast-paced manufacturing environment., • Ability to stand, bend, lift, and move continuously during the workday., • Willingness to work mandatory overtime, including Saturdays., • Basic ability to read and follow work orders and labels., • Reliable attendance and strong work ethic.Additional Skills & Qualifications, • Previous experience in manufacturing, paint line, or assembly environments is a plus., • Familiarity with palletizing or industrial packaging., • Comfort learning new equipment, with lift-assist devices training provided., • Ability to adapt quickly as production volume increases., • Team-oriented mindset with a focus on safety and productivity.Why Work Here? Enjoy full medical, dental, and vision coverage, along with gift cards for extra overtime. Benefit from a 401(k) program with a 4 percent company match. Be part of a stable, industry-leading organization in a specialty manufacturing niche that fosters a family-feel environment with strong support from engineering and production leadership. Gain opportunities to learn unique machining and documentation skills that are highly transferable, all within a consistent first-shift schedule with a full workstation and equipment provided. Work Environment Work in a manufacturing floor setting with consistent movement between departments. The position involves standing, walking, and observing active machining operations for most of the shift, with exposure to typical machine shop elements such as noise and machinery. Adhere to a standard first-shift schedule from 6:00 AM to 2:30 PM. A workstation and computer are provided for entering documentation into Shop Guru. Collaborate frequently with the Engineering Supervisor and report directly to the Manufacturing Engineer. Personal protective equipment includes steel-toed/composite boots, with a metatarsal guard provided. Job Type & Location This is a Permanent position based out of Tonawanda, NY. Pay and Benefits The pay range for this position is $21.00 - $21.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description The Project Manager’s responsibilities will include successfully managing projects from start to finish by ensuring all submittals, procedures, specifications, QA documents, and schedules are followed per the contract documents. They will ensure that all drawings are 100% accurate prior to any submittal to our customers. They will also go over all final drawings, prior to the start of fabrication, to ensure that there are no errors and that the practicality of the drawings is such as to ensure a successful build in the shop. ESSENTIAL FUNCTIONS · Strong drawing comprehension. · Examines engineering drawings of water control gates & hoists, assemblies, and fabrications to detect errors in design documents: Compares figures and lines on production drawing or diagram with production layout, examining angles, dimensions, bend allowances, and tolerances for accuracy. · Determines practicality of design, material selection, available tooling, and fabrication process, applying knowledge of drafting and manufacturing methods. · Reviews customer specifications and drawings to ensure project adherence and acceptance. · Compiles, reviews, and submits customer submittal packages as required by the projects. · Works with engineering, quality & fabrication personnel to submit and resolve RFI’s. · Confers with design personnel to resolve drawing and design discrepancies. · Specialize in checking specific types of designs, such as mechanical assemblies. · Study and review product pricing and change or modify pricing according to the current trends. · Create and maintain customer and production schedules. · Be the point of contact for assigned projects with Linita’s customers. · Assist the Chief Operating Officer and the Plant Manager in resolving customer problems, complaints, etc. · Liaise between the shop, foreman, quality department, and engineering to resolve project issues. · Perform other duties as may be required by the Chief Operating Officer of Linita. · Meet Linita’s budgets and schedules as required. · Always maintain a high degree of customer satisfaction. · Prioritize purchasing based upon lead times and project schedule requirements. · Reliability and Attendance – begin work on time and conform to work hours and schedule. · Work overtime when required to meet schedules and deadlines. · Assist engineers with bidding process (pricing materials, machining, and transportation). OTHER JOB DUTIES Other duties and/or projects as assigned by a member of the Management Team. REQUIREMENTS/QUALIFICATIONS Technical Skills · Minimum of 2 years’ experience in fitting, welding, or Project Management/Detailing/Drafting in the steel fabrication industry. · Knowledge of: o Drafting practices. o Fabrication and manufacturing practices, including methods of cutting, forming, and machining. · Some proficiency in 2D Auto-cad. An Associate’s Degree in Drafting is preferred but not mandatory. · Strong verbal and written communication skills. · Able to use Microsoft Office Outlook, Excel, and Word. Personal Characteristics · Meticulous, methodical, high attention to detail, and extremely organized. · Goal-Oriented. · Able to work in a multitasking environment of a small company and maintain self-motivation. · Positive and open-minded approach to problem-solving. · Able to manage multiple projects, respond to rapid change, and organize, prioritize, and perform work with minimal supervision. · Able to work independently as well as in a team environment. EXPERIENCE Minimum two years of experience in complex steel fabrication products required Company DescriptionLinita Design & Manufacturing specializes in the manufacturing of Water Control Equipment such Intake Gates, Bulkhead Gates, Stoplogs, Trashracks. Cranes, Hoists, etc. We are also a heavy custom fabrication shop.Linita Design & Manufacturing specializes in the manufacturing of Water Control Equipment such Intake Gates, Bulkhead Gates, Stoplogs, Trashracks. Cranes, Hoists, etc. We are also a heavy custom fabrication shop.

Job Description Position Summary The Project Manager is responsible for supporting the planning, coordination, execution, and delivery of engineer-to-order manufacturing projects and associated contracts. This role partners closely with Sales, Engineering, Operations, Quality, and external stakeholders to ensure projects are completed safely, on time, within budget, and in compliance with customer specifications and company standards, while meeting profitability objectives. At API Heat Transfer, we take our culture transformation seriously. Participation in our Culture Index Survey is required as part of the application process to ensure alignment with our values and behaviors. What You Will Do Project Coordination & Execution · Assist Sales, Engineering, and Operations in defining project scope and objectives, ensuring stakeholder alignment and technical feasibility · Support the execution of engineer-to-order manufacturing projects from release through completion · Serve as a secondary post-order point of contact for customers and sales representatives · Report project status to internal stakeholders and external customers Risk, Cost & Schedule Management · Identify potential project risks and assist in developing and implementing mitigation strategies · Support efforts to control deviations from estimated costs and project timelines · Assist Manufacturing, Planning, and Scheduling in monitoring and expediting job orders across departments and subcontractors to support on-time delivery Contract & Customer Support · Assist with contract administration on a contract-by-contract basis to ensure compliance with all contractual requirements · Coordinate customer-driven contract modifications with Sales, Engineering, Quality, Planning, and Manufacturing to ensure technical and commercial alignment · Support Sales with evaluating selling value and lead-time adjustments when required · Communicate directly with customer Project Managers and Expeditors Quality, Documentation & Compliance · Support Quality in maintaining accurate and up-to-date project records, including engineering changes, customer revisions, and compliance documentation · Assist with the creation of Inspection and Test Plans (ITPs) and customer manufacturing schedules · Support final document generation required for shipment release Supplier & Aftermarket Support · Assist the Project Manager in maintaining relationships with subcontractors, identifying issues, and executing corrective action plans · Support high-volume aftermarket orders, including gaskets and gasket cutter products · Assist with small market orders from release through execution Travel & Additional Responsibilities · Conduct customer or supplier site visits as required · Perform other related duties as assigned What You Bring · Bachelor’s degree in Engineering or a related field · 3–5 years of experience in a sales, project, or manufacturing environment · Strong working knowledge of manufacturing processes, including machining, welding, assembly, testing, and painting · Financial acumen, including budgeting and cost management · Experience with supply chain, planning and scheduling, customer service, and quality within a manufacturing operations environment · Demonstrated ability to manage multiple high-impact projects simultaneously · Strong communication skills with the ability to work effectively across all organizational levels and functions · Highly organized, detail-oriented, and self-motivated with a results-driven mindset · Ability to adapt quickly to shifting priorities · Proven problem-solving skills, including data analysis, solution implementation, and outcome sustainment Preferred Qualifications · Project Management Professional (PMP) certification · Lean Six Sigma certification · Working knowledge of ERP planning systems; Plex experience preferred · Proficiency with Microsoft Office applications (Excel, Word, PowerPoint, Outlook) Physical Requirements · Ability to sit, stand, and walk within both office and production floor environments · Occasional lifting of up to 20 lbs · Visual acuity for computer screens and documents · Ability to wear required PPE when on the shop floor · Frequent use of hands for typing and document handling What We Offer You · Opportunity to contribute to a global leader in engineered heat transfer solutions · Collaborative, team-focused work environment · Competitive compensation and bonus potential · Comprehensive health and welfare benefits, 401(k), paid time off, and professional development opportunities · Salary Range: $75,000 – $85,000 annually, commensurate with education and experience Equal Employment Opportunity Statement API Heat Transfer, Inc. is an Equal Opportunity Employer. We comply with all applicable federal, state, and local employment laws and do not discriminate on the basis of any protected status. INDZ

Job Description Hohl Industrial Services is seeking a skilled Construction Project Estimator to support our growing Construction team. This role is critical to driving business success by developing accurate, competitive, and comprehensive bid proposals for industrial construction projects. The ideal candidate brings strong analytical abilities, attention to detail, and the ability to collaborate cross-functionally with operations, business development, and project management teams. Key ResponsibilitiesBid Preparation & Estimating • Analyze project drawings, specifications, and related documents to prepare detailed cost estimates, • Develop accurate estimates for labor, materials, equipment, and subcontractors, • Identify project scope, risks, and opportunities to ensure complete bid coverage, • Prepare estimates in alignment with company standards and project requirementsCollaboration & Coordination, • Partner with operations, project managers, and business development teams during bid development, • Solicit and evaluate pricing from subcontractors and suppliers, • Communicate with clients, engineers, and stakeholders to clarify project requirements, • Resolve discrepancies in plans and specificationsProject Handoff & Execution, • Facilitate smooth transition from estimating to project management upon award, • Execute subcontracts and material purchase orders while ensuring insurance compliance, • Support project teams with cost tracking, forecasting, and vendor selection, • Communicate key risks, assumptions, and strategies identified during biddingMarket & Industry Awareness, • Monitor industry trends, pricing, and market conditions, • Build and maintain relationships with vendors, suppliers, and subcontractorsQualificationsEducation & Experience, • Minimum 5 years of experience in industrial construction estimating, • Experience in water/wastewater or infrastructure projects preferred, • Strong knowledge of construction estimating practices and methodologies, • Experience with takeoff software, scheduling tools, and cost databases, • Proficiency in Microsoft Office (Excel, Word, Project) and estimating software, • Solid understanding of labor productivity and construction methods, • Excellent analytical, problem-solving, and decision-making skills, • Strong communication skills across all levels of an organizationMathematical Skills, • Ability to perform and apply mathematical concepts ranging from basic arithmetic to advanced calculations relevant to estimatingWork Environment, • Office: Standard office setting with moderate noise levels, • Field/Shop: Exposure to active construction environments, including non-climate-controlled conditions and physical activity as neededWhy Join Hohl Industrial Services?, • Be part of a growing industrial construction company, • Work on complex and impactful infrastructure projects, • Collaborate with experienced professionals across multiple disciplines Job Posted by ApplicantPro

Job Description We are currently seeking an experienced Construction Project Manager to join our growing team! This role will be responsible for managing rigging, equipment installation and erection projects in the Industrial Market Segment. With the authority to run the project on a day-to-day basis, the Construction Project Manager will be responsible for the direction and performance of all aspects of the project with the support of the project team. Duties and Responsibilities: • Consults with clients to determine the functional and technical requirements of the scope of work and prepares estimates regarding labor, materials, equipment, estimated costs and construction time., • Responsible for projects from estimating through closeout., • Manages on-site construction activities ensuring the project is completed on schedule and within budget., • Supervises on-site staff, subcontractors and suppliers., • Act as the primary liaison between project stakeholders, including clients, construction team and subcontractors, facilitating clear and effective communication., • Effectively issues change orders to clients in a timely manner and follows through with all necessary paperwork, invoicing and accounts receivable collections., • Inspect and review projects to monitor compliance with building and safety codes, quality specifications, and other regulations., • Provide safety leadership at all stages of the project from concept and design through construction and installation, • Associates Degree; Bachelor's degree preferred. Construction Management, engineering or other related disincline required., • Seven (7) to fifteen (15) years' experience in Project Management in construction or a related field., • Demonstrated advanced technical competency in area of expertise, independently applying knowledge to large or complex projects and guiding others in standard practices., • Certification in Project Management., • Experience in Lean Construction or similar process-improvement methodologies, with the demonstrated ability to apply continuous improvement practices to scheduling, coordination, and project delivery., • Experience in Industrial and Infrastructure construction is required., • Competent in communication, interpersonal, and organizational skills; ability to multi-task., • Proven success in delivering high quality projects on time and on budget., • Strong conceptual thinker; strong critical thinking skills and problem solving ability; able to multi-task and work under pressure; strong verbal and written communication skills. Hohl Industrial Services, Inc. established in 1950, with headquarters in Tonawanda, NY, is a full-service specialized organization that provides for a diverse industrial clientele. Hohl offers a unique range of field, shop, technical, equipment sales and services. With our professional staff of engineers, project managers, skilled tradespeople, fabricators and machinists, we are able to thoroughly study and develop a customized plan to meet all of our client's needs. Combining this with our innovative strategies and techniques, added with our experienced field personnel, we administer these plans in a safe, expedient and economical measure. Hohl Industrial Services is a certified AISC fabricator and erector. Additionally we maintain CWB, NYDOT, ODOT, AWS, ASME and ISO certifications We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, or any other characteristic protected by law Job Posted by ApplicantPro

Job Description Merz Metal is a family-owned, fast-paced fabrication and machining company looking for a driven Project Manager who can estimate, sell, and execute work at a high level. This role is critical to our growth—we expect results, accountability, and urgency. What You’ll Do • Generate and pursue new project opportunities, • Prepare accurate bids from drawings, specs, and customer requests, • Manage all quotes, bid logs, and deadlines (on time—every time), • Coordinate with vendors, shop, and field teams to ensure smooth execution, • Oversee projects from award to completion, resolving issues quickly, • Quote 500+ labor hours weekly, • Maintain ~20% profit margins on projects, • Enter $50K+ in orders per week, • Strong ability to read and interpret drawings and specifications, • Highly organized with attention to detail, • Self-motivated, proactive, and comfortable in a fast-moving environment, • Strong communication and problem-solving skills We are a tight-knit, family-run company that moves fast and works hard—but we also take pride in what we build and enjoy the process. If you’re looking for a place where your effort directly impacts the company’s success, this is it. Company DescriptionMerz Metal & Machine Corp is a family-owned fabrication company in Buffalo, NY, specializing in custom metal fabrication, machining, and industrial equipment solutions. We serve a wide range of industries with a focus on quality, speed, and getting the job done right. We’re a fast-paced, hands-on team where hard work, accountability, and pride in what we build drive our success—and every employee plays a key role in that growthMerz Metal & Machine Corp is a family-owned fabrication company in Buffalo, NY, specializing in custom metal fabrication, machining, and industrial equipment solutions. We serve a wide range of industries with a focus on quality, speed, and getting the job done right.\r\n\r\nWe’re a fast-paced, hands-on team where hard work, accountability, and pride in what we build drive our success—and every employee plays a key role in that growth

Why Become a Shopper with DoorDash?. Turn your shopping skills into extra income. Either as a side hustle or a full-time gig, being a Shopper with DoorDash gives you the opportunity to earn extra cash on your terms.

Ready to take the lead? If you're excited to work with a dynamic team, learn new skills, and pave the way to a shop manager role, apply now to become an assistant shop manager at Take 5 Oil Change! Let's put your career in the fast lane!. Ready to shift your career into high gear? At Take 5 Oil Chan

Stewart's Shops - - Responsibilities: Travel between shops within a district to ensure cleanliness; Mop, strip and wax commercial floors; Maintain grounds as well as shop and restaurant standards; Ability to work independently and flexible schedule including nights and weekends; Support a drug-free

Administrative Assistant / Remote] - Anywhere in U.Both PT & FT Available - As a Data Entry Specialist you'll: Enter appropriate credits for each song; Transcribe, review, edit, and add the lyrics; Assist in adding all information needed for music publishing utilizing various databases; Create, assi

As a full-service shopper, you'll receive orders through the Shopper app to shop from stores in your area, and deliver the orders to your customer's door. They make money, make moves, and make shopping lists come true. Shoppers make it all happen—sign up now to help create a world where everyone h