Trabajos system engineer en Dallas, Texas - Page 3Crear alertas

Job Description The Registered Professional performs facility engineering and building evaluation services for all types of buildings, including civil, structural, or architectural systems. Prefer a strong roofing and waterproofing systems background, with an understanding of structural systems (walls, roofs, facades, and windows), as well as experience with typical issues encountered in building maintenance, repair, and replacement, and in repair/replacement design, construction monitoring, and contract administration. Registered Roofing Consultant, Professional Engineer, Registered Architect, or similar designation required. This detail-oriented individual will work to uphold the highest quality standards building enclosure design working on a variety of tasks involved in the complete building design process from Schematic Design through Construction Administration as well as collaboration with outside Consultants, Owners representatives and contractors. Tasks will include conceptualizing design ideas, defining performance criteria for appropriate roof selections, submittal/shop drawing reviews validation of roof drainage capacity calculations, definition and review of roofing, waterproofing exterior wall system mock-ups, system specification roof waterproofing, and exterior wall and window system detailing and meeting presentations. · Supporting, performing, and managing Amtech’s existing and pending engineering and building envelope consulting projects. These projects are expected to include, but not be limited to: o Structural engineering inspection and design o Fall protection device testing and design o Concrete testing and design (parking garages, balconies, pavements, building façade systems, etc.) o Facility and property condition assessments o Building envelope systems assessment, Roofing, Waterproofing, testing, and design · Aiding in the development of new engineering services lines for Amtech in each of our current and future office locations. These services may include pursuing additional structural engineering opportunities that fall within your skillset and/or level(s) of expertise. · Pursuing additional licenses and professional registrations in states that Amtech may be performing or planning to perform engineering services. · Pursing Structural Engineer (SE) licensure. · Aiding-in and managing existing Amtech projects. · Meeting with Amtech’s existing clients and presenting Amtech’s capabilities relevant to providing existing and new engineering services. · Performing internal peer and technical reviews of Amtech’s work products. · Mentoring and training entry and mid-level architectural and engineering staff. · Helping expand Amtech’s engineering services division. · Stamping and sealing engineering work projects as necessary. Experience/Skills/Capabilities · Facility consulting and assessment experience · Minimum 5-years experience preferred · Project management skills · Leadership skills · Experience delivering presentations · Staff development and mentoring · Good verbal and written communication skills · Experience identifying and developing new business opportunities · Ability to travel Location Denver, CO Dallas, TX New Jersey/Philadelphia Licensure Registered Roofing Consultant (RRC), Professional Engineer (PE), Registered Architect (RA), or similar designation required.

Job DescriptionElectrical Engineer - PE License Title: Sr. Electrical Engineer/Designer - PE LICENSE REQUIRED (TX) Location: Dallas, TX - On Site Salary: $90,000-$150,000/year + Relocation + Bonus + Benefits An Architectural Design firm is looking for a Sr. Electrical Engineer/Designer to join our team in Dallas, TX. We deliver high quality experience to our clientele through our projects in diverse aspects: architectural, planning, design, structural engineering, and much more! What You Will Be Doing: • Manage and oversee Electrical engineering projects of various sizes and complexity for residential and commercial projects, • Prepare the concept design and complete load calculations, schematics, equipment selection, and system concept report, • Design Electrical systems, including but not limited to electrical distribution, transfer switching, UPS, grounding and bonding, lighting and control systems, life safety and emergency systems, and fire alarm., • Design for ICAT services, including but not limited to communication systems, AV systems, security access and monitoring systems, equipment, and structured cabling., • Write construction specifications, • Analyze customer design proposals and specifications to determine cost-effective solutions, • Ensure professional quality services in all facets of work, • Coach and mentor a project team to ensure the technical accuracy of project deliverables, • Manage a team to ensure cost-effective, safe, and timely completion of projects to meet or exceed client expectations, • Manage project activities throughout the lifecycle, including the allocation of adequate resources, documentation, and other factors necessary for success, • Work with clients to deliver the end project, • Prepare and review specification and concept reports, • Provide mentoring to technical staff, assigning duties as required, • Visit the site once under construction when required, • Provide quality and cost control during the design and construction process, • Maintain project schedules and project cost summaries to track work progress, budget status, and manpower resource utilization, • Escalate and identify the need for additional services and fees, • Assist with Shop drawing reviews as required, • Over time as required What you need for this Role: • An undergraduate or Graduate Degree in Electrical or other relevant engineering disciplines is preferred., • Other professional qualifications will be considered, coupled with relevant experience, • Registration as a Professional Engineer (P.E), • Completion of a degree or diploma in project management will be considered an asset, • LEED accreditation is an asset, • Experience and Requirements:, • 5+ years of industry-related experience, • A consulting engineering background is preferred, • Strong understanding of engineering contractors, suppliers, and manufacturers, • Mechanical and Electrical coordination experience, • Construction experience will be considered an asset, • Demonstrated success in project delivery and execution of project management methods, • Flexibility to adjust to shifting priorities and deadlines, • Highly effective negotiation, diplomatic, and conflict resolution skills, • Advanced interpersonal, team building, leadership, and organizational skills, • Able to effectively communicate with all types of staff, including technical, professional, and upper management, • Able to build and maintain lasting relationships with business units, corporate departments, key managers, and other stakeholders What's in it for you: 1. Competitive Salary: $90,000-$150,000/Year + Bonus and Benefits, 2. Health, Dental & Vision, 3. Relocation Assistance, 4. 401k Match, 5. PTO If you are an Electrical Engineer with a PE License, please apply directly & email your most up-to-date resume to Benefits • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 09/03/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:Shield AI is pioneering AI pilots for aircraft that protect service members and civilians—pushing the boundaries of autonomous flight. Our next-generation UAS is designed for deployment in the most demanding, high-stakes environments. We are looking for a Staff Mechanical Engineer to join our team, focused on the design and integration of launch and recovery systems for our UAS platform. These critical mechanical systems enable safe, repeatable, and ruggedized field operations, supporting aircraft deployment and retrieval in austere and operationally complex settings. This role is ideal for engineers who thrive in hands-on development environments, bring strong expertise in mechanism design and hydraulics, and are excited to help shape the foundation of launch and recovery capabilities on one of the world’s most advanced autonomous aircraft. What you'll do: • Design, develop, and integrate mechanical systems for launch and recovery, including electromechanical actuators, hydraulic systems, and robust deployment mechanisms., • Create detailed CAD models, mechanical drawings, and documentation to support prototyping and production., • Perform mechanical and structural analysis to validate the integrity and performance of critical systems in real-world operating environments., • Partner with flight operations, avionics, systems, and manufacturing teams to ensure seamless integration and functionality of launch/recovery systems., • Lead design reviews and collaborate on system-level trade studies to balance performance, maintainability, and cost., • Support hands-on prototyping and iterative development, including testing and field validation., • Author technical documentation, system procedures, and test plans to support flight and operational teams., • Provide engineering support during field exercises and test events, ensuring readiness and reliability of all recovery systems. Required qualifications:, • 8+ years of experience in mechanical design for aerospace, ground support equipment, or heavy industrial systems., • Expertise in CAD software (SolidWorks, CATIA, NX, or similar) for 3D modeling, drawing creation, and system layout., • Strong background in structural analysis, material selection, and manufacturing processes for ruggedized systems., • Experience designing deployable, transportable, and field-ready aerospace support equipment., • Knowledge of MIL-STD design requirements for aerospace ground support systems., • Experience with finite element analysis (FEA), thermal analysis, and fatigue/lifecycle testing., • Ability to work in a fast-paced, agile development environment with evolving priorities.Preferred qualifications:, • Experience developing launch, recovery, or deployment systems for UAS, aircraft, or other mobile platforms., • Familiarity with MIL-STD design constraints and ruggedization best practices., • Exposure to environmental and dynamic testing, including vibration, thermal cycling, and fatigue., • Experience working directly with fabrication shops, contract manufacturers, and suppliers., • Ability to support field testing and flight campaigns with on-the-ground engineering support. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Davenergy Solutions is a rapidly growing, profitable company, headquartered in San Diego, CA. Our employees are the key to maintaining our competitive edge. To attract and retain the best industry talent Davenergy Solutions shares its success with its employees and is committed to providing a professional work environment where learning, growth and recognition are highly valued. If you are seeking an opportunity to work in a progressive organization that will offer you diversified challenges and an excellent opportunity for advancement, please review our current employment opportunities. For more information about Davenergy Solutions and open positions please visit our website at . We are seeking a full-time Construction Manager/Mechanical Engineer Plumbing (CM/MP) at the Dallas VA Medical Center in Dallas, Texas. This project phase constructs approximately 166,000 gross square feet (GSF) of space for a new 30-bed Long-Term Spinal Cord Injury (LTSCI) unit with associated clinical and administrative support spaces at the VA North Texas Health Care System in Dallas, Texas. Construction of the new LTSCI includes renovation of a portion of the existing Acute Care Spinal Cord Injury Building to join and integrate with the new LTSCI. Construction also includes modification and realignment of the campus loop road, utility upgrades, and associated site improvements. Position Description • Conducts portions of daily inspections of site work, building construction work; documents discrepancies, code violations, improper materials, or techniques in the application of materials, substandard or poor-quality workmanship; monitors schedules on various aspects of ongoing daily activities to identify and mitigate project slippage and coordinate project phasing., • Maintain accurate and complete files relating to the Construction Management (CM) services on the project that the Government may inspect at any time., • Reviews contractor's submittals and RFIs; maintains accurate and complete job files including as-built drawings and specifications; identifies progress delays and recommends appropriate corrective measures to the lead engineer toward mitigating delays and maintaining the progress schedule., • Submit daily, weekly, and monthly reports indicating work completed, work in progress with estimated completion dates, work scheduled and outstanding work., • Utilize computerized management system applications, processing requests for information, preparing draft contract modification documents for the senior resident engineer’s use, etc.; maintaining an inventory of materials, supplies and equipment and monitoring the quantity of materials used in the general administration and conduct of office operations.Requirements:, • Knowledge of all aspects of commercial hospital mechanical construction including but not limited to underground mechanical installation, medical gas systems, domestic water systems, chilled water systems, and steam systems., • Knowledge and design experience of plumbing systems (equipment sizing, water heating systems, chilled water systems), low Heating Ventilation and Air Conditioning (HVAC) systems, testing and balancing, operations, piping, sheet metal duct systems, and control systems including direct digital controls., • Ability to provide cost estimates and take-offs for the mechanical contract modifications., • Ability to determine compliance of workmanship, materials, equipment and installed work with contract requirements and industry standards., • Working knowledge and understanding of building, safety, and environmental codes., • Working knowledge of environmental, civil, safety, architectural and structural fields., • The Construction Manager/Mechanical Engineer Plumbing (CM/MP) shall be able to quickly understand and master the requirements of the local state and federal jurisdictions and the requirements of each in relation to this project., • Experience in the resolution of unforeseen site and design conditions/problems and propose cost effective technical solutions., • Experience conducting inspections and inventories of such structures to identify and note deficiencies, problems, or the general physical condition of such structures., • Must have six (6) years of experience practicing mechanical engineering., • Must have six (6) years of experience inspecting mechanical construction., • Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy., • Ability to utilize a variety of software programs to monitor, update, and produce work products by applying knowledge of computer literacy., • 401(k), • Annual Profit-Sharing contribution to 401(k), • 10 Paid Federal Holidays, • Health Insurance, • Dental Insurance, • Accident Coverage, • Vision Insurance, • Short Term Disability, • Long Term Disability, • Term Life Insurance, • Medical Bridge, • Critical Illness

Job Description Join our team and help shape the future of connectivity indoors and outdoors. Together, let's push the boundaries of technology and advance sustainable networks worldwide. How You'll Help Us Connect the World: As a Systems Engineer, you will be responsible for defining, architecting, and supporting next-generation 4G/5G/6G RAN and DAS system features as part of the Architecture & Engineering Division. You will work closely with global engineering teams, PLM, sales, technical support, and customers to translate requirements into scalable engineering solutions and ensure seamless integration across our DAS and converged RAN + DAS portfolio. This role is based hybrid in Richardson, TX. You Will Make an Impact By: • Defining product features and system behavior for 4G, 5G, and emerging 6G technologies across DAS and converged RAN architectures., • Translating operator, neutral-host, and enterprise customer requirements into clear engineering specifications., • Leading cross-functional alignment across embedded software, RF, systems engineering, platform teams, QA, and PLM., • Working directly with customers to gather requirements, validate features, and resolve issues., • Driving O-RANaligned architecture definition across C-Plane, U-Plane, S-Plane, and M-Plane interfaces., • Supporting integration of DAS hardware and software components within broader RAN deployments., • Partnering with sales and technical support teams to support customer feature discussions and product positioning., • Degree in Electrical Engineering, Computer Engineering, or related engineering discipline., • 8+ years of experience in telecommunications, wireless infrastructure, RAN systems, embedded systems, or similar technical areas., • Strong understanding of LTE, 5G NR, WCDMA base-station architecture, signaling, and performance., • Hands-on knowledge of O-RAN standards, including C-Plane, U-Plane, S-Plane, and M-Plane., • Expertise with CPRI/eCPRI and high-speed fronthaul transport., • Proficiency in embedded C, low-level programming, device drivers, HAL, and board bring-up., • Strong understanding of RF concepts, network planning, and integration of RAN/DAS components., • Experience with telecom networking equipment (switches, timing/sync elements, fronthaul/backhaul)., • Deep knowledge of IPv4/IPv6, multicast/simulcast, and Ethernet transport for real-time RAN systems., • Working knowledge of PTP 1588v2 and packet-based timing distribution., • Understanding of telecom security protocols, procedures, and factory security processes., • Willing to work hybrid (3 days a week in office) in Richardson, Texas with no relocation assistance available., • Have experience with major network vendors or DAS/neutral-host companies., • Have worked with silicon vendors in platform or embedded development., • Have been involved in product definition, standardization efforts, or early-phase architecture work., • Have direct experience supporting operators, stadium deployments, or enterprise networks. Explore exciting career opportunities at ANDREW, part of the Amphenol family. With a legacy of over 85 years in wireless innovation, we empower mobile operators and enterprises with cutting-edge solutions. ANDREW, an Amphenol company, is proud of our reputation as an excellent employer. Our focus is to provide the highest level of support and responsiveness to both our employees and our customers, the world's largest technology companies. ANDREW offers the opportunity for career growth within a global organization. We believe that our company is unique in that every employee, regardless of his or her position, has the ability to positively impact the business. ANDREW is an "Equal Opportunity Employer" - Minority/Female/Disabled/Veteran/Sexual Orientation/Gender Identity/National Origin For additional company information please visit our website at #LI-JT1 #LI-Hybrid

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Senior Professional Engineer to join our Water department to improve infrastructure with our Dallas/Fort Worth staff. Candidates should have a bachelor’s degree in civil or environmental engineering, ten or more years of pipeline design and project management experience and a PE license. Excellent technical writing, organization and communication skills are essential. Candidates must be self-motivated and able to work well with others. A flexible hybrid-remote work schedule available after 30 days of employment.Typical responsibilities include: • Provide senior technical planning, design and construction support on various water and wastewater treatment and collection system projects including pump station, water and wastewater treatment design, wet weather and other water resource facility projects., • Extensive experience with wide range of pumping systems, HI standards, force mains, process piping, wet well layout including new and rehabilitation projects for wastewater and/or water booster systems., • Ability to conduct hydraulic calculations to support sizing and selection., • Field experience with pump testing, start up and troubleshooting, preparation of O&M manuals., • Ability to mentor and coach staff in technical areas, • Contribute to the company's technical practice in Pumping Systems [coaching, training, developing best practices], • Prepare engineering calculations and supporting analysis of alternatives, • Prepare and evaluate wet weather control alternatives, • Develop and complete applications, permits, engineering reports and specifications, • Prepare and review engineer estimates, • Prepare design cost estimates, • Conduct research and development for projects, • Prepare project status and other reports, • Communicate project details with other design engineers, • Assist with proposals, marketing, project reports and technical presentations, • Conduct on-site inspections as needed, • Attend client and project meetings, • Attend various meetings including pre-design, plan review, pre-construction, professional organization, staff, etc., • Attend seminars and/or training classes; present at selected conferences, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering requiredSkills/Experience:, • 10+ years of related experience required, • Preferred experience in Pump Station Design, Pipeline Design, or Water/Wastewater Treatment

Job DescriptionCompany Description Fairmont Dallas, located in the Arts District of downtown Dallas, offers 545 elegant guestrooms and suites, with over 73,000 square feet of flexible meeting space. For over 50 years, Fairmont Dallas has been the setting for countless civic, social cultural, convention and corporate events, setting the stage for countless memories. Job Description Focused on all areas of technology services with a key focus on hardware, operating systems and security. This role requires proficiency in all aspects of Technology, from network infrastructure maintenance and deployment to user ticket resolutions and assistance to hotel employees, while ensuring adherence to standards required by corporate policies. • Consistently offers professional, engaging and friendly service, • Coordinate, manage and ensure that all daily hotel user service technology tickets are dealt with on a timely and accurate basis, including 3rd party SLA support, • Assist in the integration of hotel hardware and software technology, • Maintain compliance with technology standards and follow risk management practices following applicable policies and procedures outlined in the company standard Policies and Procedures, • Provide a high level of operational stability for property-based technology, • Maintain IT Systems disaster recovery and Daily Backup Logs, • Track and maintain all employee workstations, laptops and peripherals, ensuring compliance with the standard, using the Accor imaging process, with an emphasis on anticipating employee needs, • Maintain Daily Wi-Fi Log update - Maintain all Guest and Back of House Wi-Fi equipment in Public Areas, Meeting Space and Guestrooms, • Review Anti-virus logs and resolve any enterprise issues, • Maintain inventory of all I/T equipment and peripherals, network architecture and software, • Maintain IDF and MDF’s as per ACCOR Standards, • Ensure a consistent PCI compliant environment and complete annual PCI compliance reporting, • Responsible for the I/T Budget, Forecast, Financial Reporting, and checkbook management, • Source vendors for best price, quality, alignment with corporate specifications and process payment, • Oversee and manage mobile devices, including company owned and BYOD integration, • Manage technical aspects of reader boards and In-room TV system. Coordinate service and replacements with functional champions and POMEC, • Oversee and manage the phone system, • Provide technical support for locally managed systems and corporate approved applications, including but not limited to interfaces, the PMS and collateral systems, F&B systems (POS, Mini Bars, devices, etc.) and financial management systems and devices, • Seek out and deploy technological initiatives to improve efficiency, increase profit and drive guest satisfaction, • Develop the annual technology capital plan with Accor and local input, based on needs assessment. Implement projects in accordance with the approved capital budget and outlined in a critical path, • Willing to work a flexible schedule in order to accomplish all major and critical responsibilities and tasks, including after-hours support, • Coordinate out of office coverage and maintain local functional champion support list, • Onsite Fairmont Dallas office space is primary workstation, • Other duties and responsibilities as assignedQualifications, • University/College Degree or a relevant field of work, or an equivalent combination of education and work-related experience, • 2+ years progressive work-related experience in multiple areas of Technology and previous hotel experience is an asset, • A+ Certification, • Microsoft Certified System Engineer preferred, • Cisco certification or equivalent experience preferred, • Entry level Network Technician certification, • Entry level Microsoft certification, • Understanding of hotel operations, • Good verbal & written communication skills, • Strong interpersonal skills, • Self-starter with a strong sense of commitment Additional Information What’s in it for you: • Paid time off, • Medical, Dental and Vision Insurance, 401K, • Complimentary Shift Meal, • Employee benefit card offering discounted rates in Accor worldwide, • Learning programs through our Academy designed to sharpen your skills, • Ability to make a difference through our Corporate Social Responsibility activities, such as Planet 21, • Career development opportunities with national and international promotion opportunities

Job Description ARDEN LOGISTICS PARKS Arden Group is a vertically integrated real estate investment management firm focused on equity and debt investments in the top 25 US MSA’s. Founded in 1989, Arden Group has acquired approximately $7 billion of properties and asset managed in excess of $12 billion of commercial real estate assets. Established by Arden Group in 2021 as a best-in-class logistics real estate operating platform, Arden Logistics Parks specializes in the acquisition, improvement and property management of light industrial business parks. Our real estate investment business operates a geographically diverse portfolio of close to 10 million square feet of last mile facilities in highly sought-after urban infill locations throughout the United States. As a rapidly growing firm that was recently listed as “Best Places to Work in PA” for 2025, our firm provides a supportive and exciting culture for our employees to challenge themselves and thrive. As a growing firm, we are looking for experienced team members with a passion for working in a high-growth environment. We value employees who are RESPONSIVE, TENANT-CENTRIC, and NIMBLE and we’ve created an environment for such employees to flourish as we continue to expand. Position Overview We are seeking a highly organized, friendly and technically savvy Building Engineer. We offer competitive pay and benefits for this exempt position. The candidate would be responsible for overseeing and perform day-to-day maintenance in the Dallas market, including responding to daily maintenance requests from the building tenants and oversight of day porters. The successful candidate will draw on experience and utilize diverse trade skill knowledge in carpentry, plumbing, electrical, painting, roofing, heating, and cooling to manage the preservation of the parks. This position will play an integral role in investment performance and asset preservation. Tasked with managing the building maintenance technicians, porters and external vendors and consultants; this role will work with both the operations and capital team. This position requires being on-call and will report directly to the property manager. Job Responsibilities: Initiates and Executes Building Maintenance Strategy • Uses independent judgment and skillset to monitor all building operating systems to troubleshoot any potential issues. Calculates and assesses plan for repairing any malfunctions either by direct repair, or outsourcing repair of any malfunctions., • Ensures all assigned properties are functioning properly, by initiating and executing the building's preventative maintenance program., • Reports all efforts back to the property management staff, and leadership., • Collaborate with the property management team to initiate and provide reporting for preventative maintenance programs in place for monthly review, e.g., HVAC, Roofing, Exterior Lights systems, etc. by utilizing reporting through Roof Management, Ravti, Facility Manager., • Uses discretion and judgment to initiate a competitive bid process for bid analysis and makes recommendations to the Property Manager., • Owns and ensures the overall safety and compliance of the assigned asset; oversees all applicable codes, regulations, governmental agency, and Company directives related to building operations and work safety., • Ensures coverage for emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns, summoning additional assistance as needed. This may entail some limited night or weekend time on occasion., • Inspect and report building systems daily, including fire alarms, HVAC, sump pumps, and plumbing to ensure the operation of equipment is within design capabilities and operational expectations. Assist in the Warranty RMA process on mechanical equipment as needed., • Review assigned work orders, and estimate time and materials needed to complete tenant chargebacks. Order necessary materials and supplies to complete all tasks., • Performs assigned repairs, emergency, and preventive maintenance., • Replace and repair building finishes such as ceiling tiles, door hardware, wallpaper, and touch-up paint in common areas., • Changing filters, replacing light fixtures, repairing doors, hand railings, and floors, • Maintain fire and life safety systems with appropriate vendors., • Perform ice/snow/mud removal when necessary., • Maintains the building lighting system, including element and ballast repairs or replacements. Ability to use ladders/scaffolding to access roofs for required maintenance., • Performs carpentry, furniture assembly, and locksmith tasks as needed., • Knowledge of all major utilities such as gas, water, and electricity coming into the property., • Access and knowledge of phone rooms/electrical rooms., • Own, execute, and maintain all building-related reporting, ensuring that property management is apprised and informed on all performance and maintenance issues., • Utilizes discretion, and judgment to troubleshoot, evaluate, and make recommendations to upgrade maintenance systems for more operational energy savings strategies., • Manages the building’s energy management program to ensure measures are taken to operate all systems most efficiently to keep operating costs at a minimum by monitoring Yardi Pulse for any spikes, deficiencies, etc., • Works in Yardi Facilities Manager to document work orders and keep records of property conditions., • Demonstrates a proven track record totaling 5-7 years' experience in building/property maintenance or engineer experience., • Industrial knowledge of HVAC systems/maintenance, electrical, plumbing, energy management systems, demonstrates knowledge of prevention, repair, and assessment of industrial building systems, and equipment., • Strong technical aptitude; Demonstrates required skills; adapts to new technologies; troubleshoots technological problems; uses technology to increase productivity; keeps technical skills up to date., • Demonstrates a strong commitment to Quality Management; Looks for ways to improve and promote quality; demonstrates accuracy and thoroughness., • Commitment to safety - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly., • Familiarity with Yardi Voyager and Yardi Facilities Manager (preferred), • Proficiency in Microsoft Office (MS Outlook, MS Word, MS Excel), • Flexibility to be on-call to respond to after-hours / weekend emergency requests., • A valid driver’s license. Our company is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our employment decisions are based on individual qualifications, job requirements and business needs without regard to race, color, marital status, sex, sexual orientation, gender identity and/or expression, age, religion, disability, genetic information, citizenship status, national origin, pregnancy, veteran status and or any other legally protected characteristics. We are committed to providing reasonable accommodations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, sit, walk, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. The vision requirements include close vision and ability to focus. The employee may frequently lift and/or move up to 50 pounds. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Job Description Company Description For more than 40 years, Aspira has been the market-leading provider of software and services that help public agencies protect natural and cultural resources while making them accessible for all. Our platform supports everything from campground reservations to hunting licenses, helping millions of people discover, enjoy, and care for the outdoors. We share our client partners' mission: to steward resources for future generations, create opportunities for genuine enjoyment of the outdoors today, and expand access so more people can experience its benefits. Aspira is transforming its technology and service model to give agencies more capacity and insight—streamlined tools, smarter automation, and better connections with their communities. Our goal is simple: make it easier for our clients to conserve what matters most and for their customers to enjoy it to the fullest. Job Description What You Do: Aspira is seeking an experienced and forward-thinking Principal Java Engineer to join our Platform Services team. This position requires deep technical expertise, thorough understanding of architecture patterns, experience working with existing applications, and excellent problem-solving skills with a strategic, analytical approach. This will be a hands-on role, with 75% time spent on coding and 25% on thought leadership. Key Responsibilities: • Solution Design: Architect comprehensive solutions that meet business requirements using a combination of technologies, including Java, cloud services, middleware and front end., • Legacy Modernization: Lead initiatives to modernize legacy systems, integrating new technologies to enhance performance and scalability., • Technical Leadership: Provide guidance and mentorship to development teams, promoting best practices, and fostering a culture of innovation., • System Observability & Monitoring: Research and Design monitoring strategies using tools such as New Relic, or equivalent for system health., • Feature Flag & Release Management: Lead investigation, implementation, and integration of feature flag frameworks for controlled rollouts and A/B testing., • Architectural Principles Application: Develop proofs of concept, reference architectures, and integration strategies., • Collaboration: Work across the aisle with cross-functional stakeholders, leads and other architects to define system needs, deliver optimal solutions and drive innovation., • Create, maintain. monitor and enforce technical modernization vision and roadmap for multiple related applications., • Identify opportunities for improvement and recommend best practices for implementations and custom solutions, • 30 Days:, • Learn and understand the system, application, setup and code, • Integrate with the teams, developers, managers, • Meet with manager weekly and discuss progress., • 60 Days:, • Be a part of the App Support team for 4-6 weeks and learn the ropes, • Start discussion and documentation for observed problems, • 90 Days:, • Identified work streams and initiatives that need focus Experience: • Minimum 15 years of experience in solution architecture, system design, and enterprise application development., • Infrastructure build out (e.g. CI, deployment orchestration, observability, and A/B test infrastructure), • Security monitoring, vulnerability assessments, system profiling and integrating security best practices into the architecture., • Proven track record of evaluating emerging technologies and recommending adoption strategies for enterprise-wide impact., • Must be proficient in: Java Spring Framework, Java EE, Java SE, OOP principles, SQL, and SQL Server., • Must have experience with RESTful APIs and microservices., • Proven experience with React and modern JavaScript/TypeScript development., • Proficiency in AWS services (e.g., EC2, S3, RDS, Lambda etc.) Hiring Process: The hiring process outlined below is a rough overview, and is subject to change based on business priority, interviewer availability, etc. • Virtual Interview: Recruiter Screen w/ Talent Acquisition Manager, • Virtual Interview: Technical Screen w/ Hiring Manager, • Virtual Interview: Team Interview w/ Key Stakeholders and/or Team Members

Job DescriptionWho We Are With a legacy spanning four decades, Action Property Management has become the premier choice for homeowner’s association management. Founded in 1984, Action began with a single client and a vision to elevate ethical and professional standards in the HOA industry. Our unwavering commitment to integrity, and professionalism coupled with our core values of excellence, innovation and care for people, continues to define us. Today, as the largest privately owned HOA management company in the West, we proudly serve over 300 communities across 9 offices. Our success is fueled by a team of nearly 900 dedicated team members who genuinely love what they do and are dedicated to helping homeowners thrive and love where they live. Action is seeking a full-time Building Engineer I to join our 558 Condos property in Dallas, TX. Compensation: $28 per hour Schedule: Monday to Friday 8:00 AM to 5:00 PM #LI-SW1Essential Job Duties and Responsibilities: • Responsible for maintaining, correcting defencies, and/or making repairs to all common areas within the Association, • Oversee all facets of the daily operations of the building, ensuring compliance with HOA policies and regulations as required by code and regulatory enforcement agencies., • Monitor and maintain optimum performance of all building systems to include mechanical, electrical/electronic, fire life safety, smoke control, security, HVAC, and water circulation system., • Coordinate and interact with external contractors and vendors to ensure timely maintenance and repairs, as well as adherence to quality standards., • Plan and implement a preventative maintenance program to minimize downtime and prolong the lifespan of building systems., • Collaborate with General Manager on modifications and improvements to building systems, including control software, to enhance efficiency and functionality.Qualifications / Requirements, • Minimum of 3 years of onsite high rise or mid-rise building engineer experience, preferably in property management, hospitality, or commercial property management., • Familiarity with the Uniform Commercial Building Code; HOA experience is a plus., • HVAC Certification EPA/608 License Fire Pump Certificate preferred Fire Life Safety Director Certificate preferred Valid California Driver's License and Auto Insurance, • Hands-on electrical, plumbing, HVAC, and painting experience., • Experience in fire system management., • Strong verbal and written communication skills., • Team player attitude., • Availability by cell phone 24/7 for emergencies.Certifications/Licenses Required, • HVAC Certification., • EPA/608 License., • Fire Pump Certificate preferred., • Fire Life Safety Director Certificate preferred., • Valid California Driver's License and Auto Insurance.Why You'll Love Working at ActionAt Action Property Management, we believe in creating an environment where you truly love where you work. We offer competitive pay and ample opportunities for career growth and advancement. Our comprehensive benefits package includes medical, dental, vision, pet insurance, 401(k) with company match, and life and disability support for qualifying team members. We also provide generous paid time off, including vacation hours, sick time, and company-observed holidays for qualifying team members. We are committed to investing in the infrastructure, technology, training, and tools you need to excel in your role. Our relentless dedication to our company values and culture ensures a workplace where you feel heard, supported, and valued. Join us at Action Property Management and make a meaningful impact. Action Property Management is an Equal Opportunity Employer and Supports a Drug Free Workplace. Pursuant to the San Francisco and Los Angeles Fair Chance Ordinance, we will consider qualified applicants with arrest and conviction records.

Job Description DevOps Engineer PURPOSE The Development Operations Engineer will work collaboratively with the Systems Operations team, Applications Development team and Rackspace team, to deploy and operate the systems at Worldwide Express. This position will help automate and streamline the operations and processes and build and maintain tools for deployment, monitoring and operations. ESSENTIAL DUTIES, RESPONSIBILITIES & OUTCOMES: • Build process, procedures, and controls for applications development team around source control., • Partner with project manager and application developers for successful release management., • Support and maintain Jira, Jenkins, Bitbucket and other related software products to assist in source control, migration, and change management., • Perform system administration tasks in Linux and Windows Servers, including maintenance, troubleshooting, configuration, software installation, upgrades, and backup/recovery., • Upgrade systems and processes as required for enhanced functionality and security issue resolution., • Automating operational processes using scripting languages such as Shell/Ruby/Python/Ansible/Puppet/Chef tools., • Develop, implement, and continually improve system and network monitoring and alerting capabilities and procedures., • Manage relations with different teams and at various locations., • Create and maintain technical documentation for CMS, ITSM, Change control, and other system operation process’s. WHAT WE EXPECT FROM YOU: • 3+ years of related experience., • 5+ RHEL systems administration, • Strong experience with DevOps technologies including Source Code Control, Build/Deployment Management, Continuous Integration, and Continuous Delivery., • Experience with developing branching Strategy for GIT and Bitbucket Source Control Management tools., • Strong scripting skills to automate infrastructure monitoring and the deployment of software releases to development, UAT, and production environments. KNOWLEDGE OF • Excellent knowledge of the operating system(s) and automation tools., • Excellent knowledge of source control and migration software., • Knowledge of migrating code, database changes, through the various stages of the development life cycle., • Knowledge of how IT operations are managed., • Knowledge of Cloud technology’s, AWS, AZURE…., and the services they provide. SKILLS AND ABILITIES IN • Ability to handle projects for integration of Bitbucket and Jenkins, specifically in Agile development environment, working closely with various Applications Development teams., • Analytical thinking skills., • Problem solving., • Technical Expertise., • Communication/Collaboration with all levels., • Data management. (tk9nah)

Job DescriptionSenior Discovery IT System AdministratorEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Discovery IT System Administrator to join a fast-paced and hard-working team to assist with any legal accounts. As a Senior Discovery IT System Administrator, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Contractor shall provide the following services to include but not limited to: - Contractor shall ensure the day-day availability of electronic discovery applications and related tools; - Contractor shall administer and monitor all installed systems and infrastructure, install, configure, test and maintain operating systems, application software and system management tools; - Contractor shall monitor and test application performance for potential bottlenecks, identify possible solutions, and work with vendors and developers to implement fixes; - Contractor shall maintain security, backup, and redundancy strategies; - Contractor shall assist technical architecture design discussions; - Contractor shall liaise with vendors on behalf of OGC to address product issues; - Contractor shall develop and provide training for the end-users; - Contractor shall provide general support, subject matter expertise and advice on the use of electronic discovery tools and applications; - Contractor shall reverse engineer and document the as-is architecture of existing legacy applications or systems; - Contractor shall analyze capabilities, interview and collect business requirements and translate it into technical requirements; - Contractor shall support the discovery application integration/migration activities; - Contractor shall contribute to the Knowledge Management databases by creating and improving technical knowledge articles to assist in future resolution of issues; - Contractor shall have legal technology experience and knowledge of the EDRM; - Contractor shall assist in the implementation of e-discovery tools ( i.e. Relativity, Veritas eDP, or other review platform applications hosted in the cloud environment; - Contractor shall have the skills, knowledge and abilities to support backend infrastructure, data migrations, application installation, management and configuration; - Contractor shall have the ability to install, operate, and manage Microsoft server 2019/2022 and Microsoft SQL Server 2019/2022; - Contractor shall have ability to operate, and manage cloud technologies to include Microsoft Azure, Amazon AWS, VMware, Azure servers, Azure Functions, and Azure API Gateways and/or AWS EC2 servers, AWS Lambda and AWS API Gateways; - Contractor shall have ability to operate and manage relational databases, MySQL and/or SQL Server 2012 or higher. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. The Aircraft Software Test & Automation team is an ambitious, driven group of engineers focused on testing complex aircraft software integrated onto vehicles and various hardware systems. The team is a cross-discipline group of test engineers, software developers, integration experts, and more; working closely with our Embedded, GNC (Guidance, Navigation & Controls), and System Test teams, the Software Test & Automation team is chartered to provide (1) rigorous, but fast testing and (2) an advanced, robust development & test infrastructure for all aircraft software. Shield AI is building groundbreaking autonomous aircraft technologies, this team provides the complex testing & innovative capabilities required to get us there. As a Software Simulation Lead, you will be responsible for improving and scaling our simulation capabilities for the V-BAT and future aircraft. You will design, resource, manage, build and integrate tooling across our various engineering teams (e.g. Aerodynamics, GNC, Propulsion, etc.) to enable efficient and scalable simulation workflows. Your simulation solutions will be a key development tool for other engineers and also a critical gate in our release process.WHAT YOU'LL DO: • Design, develop, and optimize high-performance simulation frameworks., • Align needs and priorities across many teams and disciplines, • Manager and lead a small team of specialized simulation engineer in multiple locations., • Collaborate with cross-functional teams, including software engineers, autonomy engineers, and aerodynamics engineers, to ensure the simulation accurately reflects real-world conditions., • Integrate basic physics principles into simulations to enhance realism and accuracy., • Conduct testing and validation of simulation frameworks to ensure performance and reliability., • Stay updated with the latest advancements in simulation technologies and apply them to our systems.REQUIRED QUALIFICATIONS:, • BS in Computer Science or related engineering field with 8+ years of professional experience., • 2+ years of experience leading engineering teams or projects., • Passion for simulation and testing with the goal of ensuring safety and reliability at scale., • Experience building simulation within DevOps environments in addition to experince with DevOps tools and infrastructure., • Interest in aerospace and autonomous vehicles., • Strong foundation in modern C++, including a deep understanding of memory management, performance optimization, and debugging., • Experience with robotics concepts, including node-based architectures such as ROS or similar middleware frameworks., • Foundational knowledge of statistics and its application in software development, testing, and data analysis., • Experience building and compiling code in complex software environments, including debugging build errors and managing dependencies., • Solid understanding of mathematics (especially linear algebra) and foundational physics, with the ability to interpret technical papers and algorithms effectively., • Eagerness to learn, adapt, and grow in a collaborative team environment, with a proactive approach to problem-solving and communication.PREFERRED QUALIFICATIONS:, • Experience with Docker, Kubernetes, and/or containerised application development, • Familiarity with rigid body dynamics (e.g. Euler’s equations, quaternions), aerodynamics, propulsion systems, etc., • Experience with Python 3 and data science frameworks (e.g. NumPy, Pandas, Dagster), • Experience with robotics concepts, including node-based architectures such as ROS or similar middleware frameworks. #LI-SM1 Full-time regular employee offer package: Pay within range listed + Bonus + Benefits + Equity Temporary employee offer package: Pay within range listed above + temporary benefits package (applicable after 60 days of employment) Salary compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location. All offers are contingent on a cleared background and possible reference check. Military fellows and part-time employees are not eligible for benefits. Please speak to your talent acquisition representative for more information. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. As a Software Systems Test Engineer on the team, you will be pivotal in driving integration testing of our full aircraft software system, integrating our autonomy, flight controller, and GCS software to qualify an intelligent, robust aircraft system. This role demands an engineer capable of overseeing system-level verification and validation, designing complex test scenarios, and ensuring that subsystem testing meets rigorous standards before proceeding to full system integration. You will marshal our aircraft software through full system verification & validation. Your work will directly impact the reliability and performance of our aircraft, preparing them for operational excellence in the field.What You'll Do: • Generate detailed mission test scenarios that mimic real-world conditions to validate system performance., • Lead the development and enhancement of our system testing processes and related infrastructure, promoting efficient & innovative testing processes to achieve operational validation and quick feedback loops., • Examples include:, • Mission simulation scenarios exercising autonomy software with hardware-in-the-loop, • Continuous testing pipelines that verify subsystems before triggering system tests, • Suite of automated test cases to perform full system testing with vehicles-in-the-loop, • Design and implement automated integration tests across all software systems to ensure seamless functionality and high performance., • Qualify subsystem integrations to guarantee robustness prior to comprehensive system testing., • Conduct and manage system verification and validation events, culminating in verified flight readiness., • Troubleshoot and resolve complex issues that arise during the testing phases to maintain project timelines and quality standards, • Write test analyzers in Python to report and benchmark performance and qualification metrics of the system, • Produce test coverage and release-readiness reports by aggregating test cases, results, and quality requirements Required Qualifications:, • Excellent proficiency in testing complex integrated software systems, preferably for robotics or vehicles. Demonstrated ability to design and execute elaborate test cases., • Excellent analytical skills and ability to synthesize complex data into conclusions & actionable plans. Demonstrated ability in coding analyzers to automate evaluation of test data, using python and common industry tools to do so., • Demonstrated expertise & experience in test automation, minimally writing software to automate testing, preferably leveraging simulation for automated integration testing., • Strong experience with the software product development lifecycle, ideally for autonomy or vehicle systems., • Strong mathematical background, capable of understanding software models describing aircraft physics and flight control algorithms, • Solid technical expertise in software development, especially in C++ and Python, including tools like Docker, CI/CD pipelines, and Artifactory, • Great understanding of system architecture, requirement derivation, and test planning across the Systems Vee model, • Experience producing high-quality technical documentation, including test plans, quality-assurance reports, and operational procedures, • Demonstrated track record of assuming ownership over development processes and features and delivering outstanding outcomes, • Proven track record of successfully shipping products, showcasing the ability to navigate through development cycles, overcome obstacles, and deliver high-quality solutions to meet project deadlines and exceed expectations in a fast-paced environment, • B.S., M.S, PhD degree in Systems Engineering, Software Engineering, Computer Science or STEM (Science, Technology, Engineering, or Mathematics) discipline, such as Aerospace, Mechanical, or Electrical Engineering., • Optimally with 6-7+ years of real word experience.Preferred Qualifications:, • Experience with autonomous or robotic systems., • Experience with simulation software and hardware emulation. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. JOB DESCRIPTION:As a simulation engineer, you will be responsible creating and maintaining all of the sensor and hardware models in the simulation as well as verifying the models against actual live flight data. WHAT YOU'LL DO: • Create hardware / sensor models in C++ (Engines, Servos, Air Data Sensors, IMUs, GPS sensors, optical sensors, boat models, Contact models), • Manage the lifecycle of the models (improvements, etc.)f or all development environments (SIL, PIL, HIL, VIL), • Add unit tests for any newly written C++ code / models, • Validate the models against live flight data (System ID methods), • Create justified Monte Carlo bounds for all models, • Create documentation for all models, • Scale simulation into CI pipelinesREQUIRED QUALIFICATIONS:, • Typically requires a minimum of 3-5 years of related experience with a Bachelor’s degree or equivalent work experience., • Experience developing and delivering a simulation framework for internal or external customers, • Solid fundamentals in math and physics, • Experience with C++ 17 or newer in a production environment, • Experience with Linux, git, command line tools, etc., • Experience with data analysis, • Excellent communication skills, with the ability to effectively collaborate with multidisciplinary teams and external stakeholders., • You have a demonstrated record of working hard, being a trustworthy teammate, holding yourself and others to high standards, and being kind to othersPREFERRED QUALIFICATIONS:, • Experience with Docker, Kubernetes, and/or containerized application development, • Experience with physics-based implementations of forces and moments using numerical methods, differential equations, etc. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJOB DESCRIPTION:The Software Integration & Operations (SIO) group turns frontier autonomy into mission-ready aircraft. We own the commit-to-flight pipeline—deterministic simulation at cluster scale, HIL/VIL integration, CI/CD, automated testing, and release engineering. Our goal is simple: make AI fly—safely, repeatably, and fast. As a Staff Simulation Engineer, you will be dedicated to Shield AI’s next-generation aircraft program, adopting our existing infrastructure to advance new capabilities. You’ll design, build, and scale C++-based simulation tools that test and validate the full aircraft software stack—from autonomy to avionics—before it ever flies. Your simulation infrastructure will enable developers to test faster, system engineers to evaluate performance earlier, and release engineers to ship with confidence. WHAT YOU'LL DO:Build and scale simulation frameworks for integrated testing of autonomy, GNC, and embedded systems in C++.Design deterministic, high-performance simulation tools capable of faster-than-real-time execution for development, testing, and release.Integrate core physics, dynamics, and system models (aerodynamics, propulsion, controls) into a unified simulation environment.Collaborate across autonomy, embedded, GNC, and test engineering to ensure the simulation mirrors real aircraft behavior and mission scenarios.Develop infrastructure for CI integration, parallel simulation execution, and automated regression testing.Profile, optimize, and validate C++ codebases for performance, determinism, and fidelity.Contribute to architecture decisions that define the next generation of aircraft simulation tools within Shield AI.Mentor engineers and guide best practices in C++, simulation architecture, and performance engineering. REQUIRED QUALIFICATIONS:BS or MS in Computer Science, Aerospace, Robotics, or related field.8+ years of experience in software development, with emphasis on modern C++ (C++17 or later) and performance optimization.Proven experience developing or integrating simulation systems for robotics, aerospace, or autonomous systems.Strong grasp of real-time and deterministic software design, including multi-threading, synchronization, and memory management.Understanding of rigid-body dynamics, kinematics, and basic flight mechanics.Familiarity with DevOps-integrated simulation workflows, including CI/CD and containerized environments.Ability to debug complex build and runtime environments (CMake, dependency management, logging, profiling tools).Strong collaboration and communication skills across software, hardware, and systems disciplines. PREFERRED QUALIFICATIONS:Experience with distributed or cloud-based simulation (e.g., cluster orchestration, Kubernetes).Working knowledge of Python for data analysis, test automation, or simulation orchestration.Familiarity with sensor and actuator modeling, and integrating avionics or autonomy software within simulation.#LI-SM1 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Title: ETL Automation Engineer with Java Location: Wilmington, DE Description: Overall Job Purpose • Responsible for functionally leading technical test teams with hands on experience of ETL and Java., • Experience in managing testing of ETL/Batch/BigData Applications in agile environment., • Experience in understanding of underlying technologies and business processes that impact the test approach., • Drive innovation in testability of code, test automation strategy and methodology, • Ensure success of continuous integration and quality control through automation, • Ensure high-quality solutions through automation, • Establish quality assurance standards and best practices for test automation. Key Accountabilities • Review requirements and design specifications with an emphasis towards product testability, • Develop test strategies with QA engineers, developers and team members, • Design & code unit, component, integration, service/API and system automated testing for all new or enhanced IT systems to a high level of quality, producing appropriate documentation., • Maintaining an expert level awareness of relevant software design techniques, automation tools and processes, development tools and processes, providing leadership in the use of these across the organization area., • Develop supporting structures for all test automation including mocks, stubs, & test harnesses, • Design, extend, and optimize test automation framework, • Automate test data management • Identify, implement, manage and report appropriate metrics., • Work with the Quality Assurance organization to ensure established procedures, standards and processes are utilized consistently, • Maintains quality standards for own work; detail-oriented., • Develop and sustain positive relationships with peers., • Provide technical support and coaching to team members regarding automated testing and optimizing testability of code Administration Best qualified candidate must have minimum Seven years (10+ preferred) SDLC experience in ETL and Java on large software systems. • Experience working in an agile development environment, preferably Scrum Technical Knowledge, • Can describe the overall function of several components in the technical platform, • Demonstrated very strong level of technical expertise both within own area of responsibility and other IT domains, • Has comprehensive understanding of full development lifecycle and is actively involved in all phases, • Proficient in object oriented design and design patterns, • Experience in ETL, Data warehouse concepts, • Experience in DataStage, Hadoop Ecosystem and Scheduling tool Control-M,, • Experience with unit testing tools such as JUnit, TestNG,, • Can describe solutions in UML, • Understand Java, JEE, Javascript, O/R Mapping, SQL, PL/SQL, UNIX scripting, UML, Eclipse, Frameworks (Struts, Stripes, Spring), CVS/SubVersion, HTML, CSS, • Has expert knowledge of multi-threading, SOAP/REST, and MVC, • Well versed in RDBMS technology: Oracle, SQL Server, • Bachelor’s degree in Computer Science or Engineering Desired, • Experience with Test Driven Development • Experience with Continuous Delivery, • Experience in one of more test automation tools is great plus like SOAPUI Pro, Selenium, Ranorex, SeeTest. QTP, • Experience with Jenkins/Hudson/Nolio/SONAR/Fisheye/Crucible, • Domain background of Banking / Credit Card industry, • Experience with TSYS

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:As a Hivemind Solutions Systems Test Engineer, you will be at the epicenter of integration and testing for deploying our Hivemind Software and AI Pilot on 3rd Party Platforms. You will be planning and executing the integration and testing of SW and HW systems throughout the Software Development Life Cycle, preparing them for simulation demonstrations and on-ground, in-flight, or sea trial test campaigns. Our test campaigns are hands-on and fast paced, with lots of planning, documentation, communication, coordination, manual testing, scripted testing, test reviewing, debugging, and system verification. Your efforts will be rewarded with successful flight test events and your contributions will play a key role in developing an AI autopilot, enabling intelligent aircraft, historic aviation firsts and fulfilling our mission to protect service members and civilians the world over! What you'll do: • Work with Hivemind and Hivemind Solutions engineering to test and integrate software and hardware systems preparing for simulation milestones and flight tests., • Support on-site flight testing that involves system configuration, running aircraft software, and data post-analysis., • Hands-on debugging during on-ground and in-flight test and/or sea trial campaigns., • Write Python code to test complex Hivemind + aircraft SW and HW systems (with SW emphasis)., • Create SW based tools to improve flight testing and troubleshooting (Python and/or C++)., • Become a subject-matter-expert for running Hivemind tests on our Hardware-In-The-Loop and Vehicle-In-The-Loop systems., • Run simulated flight tests to validate Hivemind + platform subsystems., • Contribute to software utilities and automated test suites for Hardware-In-The-Loop infrastructure., • Contribute to and execute test plans to validate Hivemind SW and HW systems., • Create test team data Dashboards to provide high-level results visibility and data analysis., • Review artifacts related to simulated and real flight test data for any anomalous behavior, • Identify, analyze, and document software defects, issues, and inconsistencies in software behavior., • Drive continuous improvement in testing methodologies, tools, and processesRequired qualifications:, • Typically requires a minimum of 10 years of related experience with a Bachelor’s degree; or 9 years and a Master’s degree; or 7 years with a PhD; or equivalent work experience., • Proficiency in Python., • Experience in robotics, small UAS, USV, UUV, or related hands-on engineering projects., • Strong analytical, problem-solving, and debugging skills ., • Passionate about intelligent systems., • Excellent communication and collaboration skills, with the ability to work effectively with cross-functional software, hardware and mechanical engineering teams., • Adaptability and a willingness to learn new technologies and methodologies quickly in a fast-paced environment, • The ability to obtain and maintain a SECRET Clearance. US citizenship is required as only US citizens are eligible for a security clearance. Preferred qualifications:, • Experience building unmanned systems, such as quadrotor drones or similar., • Proficiency in Python and C++., • FIRST Robotics experience., • Software management tools (Git, AzureDevOps/Jira, Artifactory)., • Experience in the aerospace or defense industries, working with complex systems and adhering to stringent standards and regulations. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJOB DESCRIPTION:Shield AI is building autonomous aircraft that push the limits of aviation. The Software Integration & Operations (SIO) team builds and sustains the release systems that make safe, rapid, and repeatable deployment of aircraft software possible. As a Simulation Application Engineer, you will be responsible for improving and adding to our operator training tool interface and architecture to bring about a seamless training experience that translates into expert real world use. You and your software will directly ensure our operators always the tools needed to train in simulation before embarking on their missions; in the classroom or in the field. WHAT YOU'LL DO:Work with our training team to align on designs that bring about the best user experience and our internal engineering teams to support their development. Build out containers and integrate with other software applications to make the simplest workflows as possible on Linux and Windows. Design and develops automated testing strategies to avoid regressions in the training application and ensure reliability. Optimize performance and scalability of the simulation application to support complex training scenarios and multiple concurrent users. Rapidly prototype and evaluate new technologies to keep the training system at the cutting edge. REQUIRED QUALIFICATIONS:BS in Computer Science or related engineering field with 3+ years of professional experience. Strong foundation in Python. Passion for creating an amazing user experience in a complex system. 2+ years of experience creating operator/pilot training applications. Interest in aerospace and autonomous vehicles. Eagerness to learn, adapt, and grow in a collaborative team environment, with a proactive approach to problem-solving and communication. Experience developing automated testing of GUIs. Experience with containerization. PREFERRED QUALIFICATIONS:Experience with TypeScript, Java, and C++ Experience creating and modifying DevOps pipelines Experience with Data Analysis tactics and designs Experience with Containerization #LI-SM1 We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionLightEdge is an enterprise-grade cloud services and colocation company focused on the needs of businesses and their critical IT requirements. If you want to take your skills to the next level by joining an industry leader, this is an excellent opportunity for you! We are seeking a dedicated and experienced Compliance Engineer to join our Cloud Center of Excellence team. The Cloud Compliance Engineer works within the AWS and Azure Operations teams and is responsible for supporting Lightedge customers in reaching their infrastructure compliance goals. The incumbent will provide expert guidance to AWS and Azure customers to improve their compliance posture while clearly documenting areas of improvement and executing remediations. The position requires excellent verbal and written communication skills along with a passion for problem solving. The position may require working off hours (including holidays and weekends) in support of changes and upgrades.Responsibilities • This position will report to the Director of the Cloud Center of Excellence and will serve as the resident expert on public cloud compliance and security management, • Evaluate environments using security and compliance tools (both cloud native and third party) to identify potential vulnerabilities., • Participate in scoping calls with customers to assess compliance requirements and security needs., • Implement and validate compliance monitoring tooling to include managing third party tooling configuration in support of customer environments., • Possess an in-depth understanding of cloud security best practices., • Stay up to date with new compliance requirements for key compliance types (SOC 2, HIPAA, PCI, etc)., • Evaluate customer needs, troubleshoot as needed, and engineer custom solutions and performance recommendations., • Respond to customer support calls related to AWS and Azure environments, managing incidents within the ticketing system and resolving issues through troubleshooting., • Evaluate issues reported or observed, utilizing problem solving skills and attention to detail to resolve problems quickly and effectively and to proactively prevent problems. Escalate as needed., • Collaborate effectively with coworkers and other departments (Security, Networking, Data Protection, and Operating Systems) in support of customer environments, meeting the customers’ needs quickly and effectively., • Appropriately document customer interactions in ticketing system., • Prioritize and complete assigned duties expeditiously and within approved windows., • Engage with AWS or Microsoft Support on behalf of Lightedge customers as needed., • Make presentations or attend meetings regarding internal or customer environments, • Provide exceptional customer service by communicating clearly and accurately (both verbally and in writing) while maintaining a professional demeanor., • Stay abreast of latest AWS and Azure security offerings and make recommendations to leadership., • Other duties as assigned.Education and Experience To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Bachelor’s Degree in computer science, Information Security or related discipline; or an Associate’s Degree and equivalent work experience, • At least 2 years’ experience working in AWS and Azure cloud environments; experience with security or compliance support in public cloud strongly preferred, • Possess at least one current Public Cloud Certification (AWS or Azure) with a preference for Security specialization certification, • Comprehensive understanding of public cloud security best practices and troubleshooting techniques, and experience providing systems administration and issue resolution for cloud environments, • Excellent security analysis fundamentals and robust troubleshooting skills., • Ability to manage multiple priorities and projects at the same time., • Strong interpersonal skills; ability to work collaboratively within a team, while also taking the initiative to lead when needed.

Job DescriptionDiscovery IT System AdministratorEmployment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Discovery IT System Administrator to join a fast-paced and hard-working team to assist with any legal accounts. As a Discovery IT System Administrator, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Contractor shall provide the following services to include but not limited to: - Contractor shall ensure the day-day availability of electronic discovery applications and related tools; - Contractor shall administer and monitor all installed systems and infrastructure, install, configure, test and maintain operating systems, application software and system management tools; - Contractor shall monitor and test application performance for potential bottlenecks, identify possible solutions, and work with vendors and developers to implement fixes; - Contractor shall maintain security, backup, and redundancy strategies; - Contractor shall assist technical architecture design discussions; - Contractor shall liaise with vendors on behalf of OGC to address product issues; - Contractor shall develop and provide training for the end-users; - Contractor shall provide general support, subject matter expertise and advice on the use of electronic discovery tools and applications; - Contractor shall reverse engineer and document the as-is architecture of existing legacy applications or systems; - Contractor shall analyze capabilities, interview and collect business requirements and translate it into technical requirements; - Contractor shall support the discovery application integration/migration activities; - Contractor shall contribute to the Knowledge Management databases by creating and improving technical knowledge articles to assist in future resolution of issues; - Contractor shall have legal technology experience and knowledge of the EDRM; - Contractor shall assist in the implementation of e-discovery tools ( i.e. Relativity, Veritas eDP, or other review platform applications hosted in the cloud environment; - Contractor shall have the skills, knowledge and abilities to support backend infrastructure, data migrations, application installation, management and configuration; - Contractor shall have the ability to install, operate, and manage Microsoft server 2019/2022 and Microsoft SQL Server 2019/2022; - Contractor shall have ability to operate, and manage cloud technologies to include Microsoft Azure, Amazon AWS, VMware, Azure servers, Azure Functions, and Azure API Gateways and/or AWS EC2 servers, AWS Lambda and AWS API Gateways; - Contractor shall have ability to operate and manage relational databases, MySQL and/or SQL Server 2012 or higher. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description Allied Universal® is hiring a Vice President, Engineering and Technology. The Vice President will be a strategic and operational leader responsible for the vision, development, and execution of the company's engineering and technology roadmap. The Vice President of Technology and Engineering oversees pre-sales Solution Architecture, post-sales Solution Engineering, Estimating, and the Configure, Price, and Quote (CPQ) platform. This role leads a matrixed, decentralized team of regional engineering managers and vertical-market engineering groups. The Vice President will have strong executive presence, cross-functional leadership, and a passion for emerging technology and innovation. RESPONSIBILITIES: Leadership and Strategy: • Define and execute the company's technology strategy and roadmap while refining engineering standards, processes, and best practices for scalable, high-quality, cost-effective delivery, • Lead cross-functional collaboration with Sales, Marketing, Operations, IT, and Business Unit leaders to drive go-to-market strategy, solution design, and execution, • Chair the Technology Evaluation Committee to assess and adopt new technologies, vendors, platforms, and methodologies; monitor industry trends to identify and evaluate emerging innovation, • Oversee pre-sales Solution Architects and post-sales Engineering teams, driving alignment on customer requirements, scalable solution design, and consistent delivery practices across a decentralized organization, • Lead the Estimating function, refining processes, pricing models, and labor methodologies; manage and optimize CPQ tools in line with sales strategy and engineering input, • Align regional managers and sector-specific engineering leads to support scalable delivery and technical consistency across the business, • Maintain and expand expertise in low-voltage electronic security systems: intrusion detection, video surveillance, access control, life safety systems, sensors, edge devices, networking, and transmission systems, • Bachelor's degree in engineering, Information Technology, or related field of study, • Minimum of fifteen (15) years of progressive experience in engineering or technical leadership roles within the physical electronic security, life safety, Smart Building, BIoT, PropTech, or low-voltage systems integration industry, • Minimum of ten (10) years of direct engineering leadership experience, including management of cross-functional and geographically dispersed teams, • Experience in global operations or projects involving multinational clients, • Visionary leadership with a bias for innovation and execution, and the ability to navigate ambiguity in fast-paced, evolving environments, • Strong business acumen and understanding of financial drivers in project-based services, • Demonstrated experience in Configure, Price, and Quote (CPQ) applications, CAD (Computer-Aided Design), BIM (Building Information Modeling), pre and post-sales engineering, and large-scale solution architecture, • Proven record of technology evaluation, adoption, implementation, and roadmap development in a complex integration or systems-based business, • Strong understanding of field services operations and experience working in a matrixed, decentralized environment, with a collaborative mindset and ability to lead across functions, • Exceptional communication, leadership, and stakeholder management skills at all levels of the organization, with executive presence and exceptional presentation and public speaking abilities, • Technical acumen with knowledge of electronic security systems, IP networking, sensors, and integrated platforms, • Master's degrees in engineering, Information Technology, or a related field, • Professional certifications (e.g., CPP, PSP, RCDD, NICET, PMP, CompTIA), • Base salary range: $150,000-$200,000 based on location and experience, 40% annual bonus eligibility, • Medical, dental, vision, basic life, AD&D, retirement plan and disability insurance, • Eight paid holidays annually, five sick days, and four personal days, • Executive Flex Time Off Plan #LI-BL Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1493907

Job DescriptionWhat We Offer: Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program. Employee Resource Groups and Programs offered include the Young Professionals Group, Women at Wade Trim, Diversity, Equity and Inclusion, Professional Development, Leadership Development, Rotation Program, Mentor Program, Sustainability Program, and Wellness Program. Position Description: We are looking for a Professional Engineer to join our Water department to improve infrastructure with our Dallas or Fort Worth staff. Candidates must have a preferred bachelor's degree in civil and/or environmental engineering and five to ten years of related experience. PE license is required. Excellent technical writing, organization and communication skills are essential. Candidates must be self-motivated and able to work well with others. A flexible hybrid-remote work schedule available after 30 days of employment.Typical responsibilities include: • Provide technical planning, design, permitting, and construction support on various water utility projects that may include collection system, pump station, wastewater treatment, reclaimed water, water treatment, water distribution, and various other ancillary civil engineering projects., • Attend client, public, project and staff meetings including client progress, plan review, preconstruction, etc., • Project Management, • Provide supervision and mentorship to entry-level staff, • Prepare engineering calculations and supporting analysis of alternatives, • Prepare design reports and construction plans using local and state standards, • Review construction plans using AutoCAD 3D, Civil 3D and Revit, • Prepare/assist with permit submittals, • Prepare preliminary project cost estimates and evaluate quantities, • Assist with/review scope, budget, and schedule of new project tasks, • Conduct on-site inspections as needed, • Assist in the preparation of proposals, • Participate in associations, • Maintain excellent client relations, • Maintain a safe working environmentEducation:, • Bachelor's Degree in Civil or Environmental Engineering preferred, • Bachelor's Degree in Engineering requiredSkills/Experience:, • 5 to 10 years of related experience required

Job Description LTK's mission is to empower the world's premium lifestyle Creators to achieve maximum economic success. We have a huge opportunity ahead of us and we're looking for team members who want to create, innovate and disrupt an industry. We empower our team members to drive innovation, create value, and continue to spearhead the creation of this industry — a game changer when it comes to career growth. Job title: Staff Software Engineer, Platform Location: US-Remote #LI-Remote About the role We are seeking a Staff Software Engineer to join LTK's developer platform team. The developer platform team focuses on designing, building, and maintaining the core infrastructure and tools that enable other software development teams to work efficiently, securely, and reliably. Key responsibilities include creating scalable, automated CI/CD pipelines, developing self-service tools, fostering collaboration, and mentoring other engineers to improve the overall developer experience and operational excellence. This role requires strong technical leadership, expertise in distributed systems, and a product-oriented mindset to treat the developer platform as a product for internal users. We are looking for a technical leader who has a deep understanding of distributed systems, and hands-on experience in large-scale backend services, Kubernetes, gRPC and service mesh. You will be responsible for designing the architecture and leading the team to deliver a modern platform that powers all LTK's internal services. How you will make an impact • Build developer-facing tooling and infrastructure that promotes developer satisfaction and improves development velocity, • Define, document, and build golden paths for teams to build services in a scalable, secure way, • Work with teams across the company to gather requirements, support and drive projects forward, • Provide guidance and unblock others on the team while helping others grow through code reviews, • Make good, informed decisions around technical debt and tradeoffs, • Proven leadership skills, including mentoring and guiding engineers, leading technical initiatives, and collaborating with cross-functional teams, • Project Management: Ability to lead projects from conception to completion and manage timelines, resources, and priorities effectively., • Continuous Learning: A commitment to staying up-to-date with industry trends, tools, and methodologies and a passion for sharing knowledge with peers., • Develop and maintain relationships with key stakeholders, including other technical leaders and teams, • Communication: Excellent communication skills to effectively convey technical concepts, collaborate with non-technical stakeholders, and guide technical decisions., • Influence: Ability to influence technical decisions across teams and mentor others in technical skills and practices., • A mindset focused on seizing opportunities and moving with urgency., • Dedication to fierce prioritization and operational excellence., • Adaptability to a dynamic, fast-moving environment., • 10+ years of experience in software development, • Experience building developer platforms/frameworks (Backstage.io, Cortex, Humanitec, score.dev et al.) for companies past the start-up stage, • Experience with containerization technologies such as Docker and Kubernetes., • Experience migrating workloads onto Kubernetes/EKS, • Experience building and maintaining CI/CD pipelines, system monitors, and log aggregation services, • Experience with CI/CD tools like Github Actions, Gitlab, Circle CI, Argo, Kargo, • Experience with Infrastructure as Code, including CloudFormation and Teraform, • Knowledge of observability best practices and logging/monitoring tools like DataDog, Splunk, New Relic, Edge Delta, Prometheus, et al., • Experience with AWS systems such as ECS, Lambda, RDS et al., • Experience writing services in Go, Python, C++ or Java, • Have built scalable internal and public-facing APIs (REST, JSON, HTTP)., • Experience integrating 3rd party API's (REST, OAuth), • Expertise in working with various data storage technologies, including relational and NoSQL databases, • Knowledge of microservices architecture and related technologies., • Familiarity with agile methods and familiarity with Scrum or Kanban frameworks, • Comfortable shipping code multiple times per day, • Proven experience in influencing and mentoring other members of the Engineering team, • Experience designing and delivering high-available, scalable cloud-based systems, • A Master's degree in Computer Science, Engineering, or a related technical field (or equivalent, • Experience with Developer Experience software like backstage.io and Dx, • Proficiency using and evangelizing the use of various AI tools to enhance personal and team software development productivity #LI-JF1 What we offer • The opportunity to be part of the leading global company in creator commerce, • A remote-first, productivity-first environment, • Competitive compensation and benefits package to meet the needs of you and your family, • 401(k) with LTK company matching, • Medical Insurance, Vision Insurance, Dental Insurance, • Paid Maternity Leave and Paid Paternity Leave, • Here to win, • Commit to the journey For US-Based Roles: We are not offering new sponsorships opportunities at this time for persons requiring employment visas, such as an H-1B; authorization to work in the U.S. is a precondition of employment. Any unsolicited resumes/candidate profiles submitted through our website or to personal email accounts of employees of LTK are considered the property of LTK and are not subject to payment of agency fees. LTK is an Equal Opportunity Employer. #LI-Remote

Job Description Job Title: SCADA and Relay/Controls Engineer Job Type: Full-Time Job Location: Dallas, TX (Remote) Schedule: The SCADA and Relay/Controls Engineer is responsible for supporting reliable and compliant operations by maintaining SCADA and Power Plant Controllers for solar power plants. This includes troubleshooting of any SCADA, relay and Power Plant Controller issues, coordinating with SCADA integrators to implement configuration changes or SCADA upgrades, providing commissioning oversight for new SCADA systems, and working with the OT and Compliance teams to ensure that SCADA systems meet networking cyber security and compliance requirements Duties/Responsibilities: • Troubleshoot issues with SCADA and Power Plant Controllers, mainly GE/Emerson, SEL RTACs and Siemens RTUs, • Familiarity with HMI/SCADA platforms such as Ignition!, Cimplicity, Vantage, Merit, etc., • Familiarity with solar transmission and distributed generation site devices such as sensors and associated relays, meters, cap banks, inverters, transformers, • DNP3, MODBUS, OPCUA, MQTT, SEL, TCP/IP protocol troubleshooting and configuration experience, • Coordinate with SCADA integrators to implement changes or SCADA upgrades, • Perform validation and quality control checks for new and existing SCADA systems, • SCADA design and implementation within a NERC-CIP environment. Experience specifically with Ignition! and GE Cimplicity preferred, • Ability to interpret electrical one-line diagrams and site control drawings, • Understanding and familiarity with solar and battery system logic for Power Plant Controller (PCC) functionality including Automatic Voltage Regulation and Frequency Response, • Understanding power plant operations and situational awareness needs for system operators while following relevant safety protocols, • Proficiency with SEL RTAC relay and network troubleshooting and configuration, • Bachelor's degree in a relevant technical field, • Prolonged periods sitting at a desk and working on a computer, • 401(k) with employer match, • Health Insurance, • Dental Insurance, • Vision Insurance, • Flexible Spending Account, • Health Savings Account, • Short-term and Long-term disability, • Critical illness, • Paid Time Off, • Parental Leave, • Paid Holidays, • Employee assistance program, • Life insurance, • Opportunities for advancement, • Training and Development, • Legal and Identity Theft

Job DescriptionWaabi, founded by AI pioneer and visionary Raquel Urtasun, is an AI company building the next generation of self-driving technology. With a world class team and an innovative approach that unleashes the power of AI to “drive” safely in the real world, Waabi is bringing the promise of self-driving closer to commercialization than ever before. Waabi is backed by best-in-class investors across the technology, logistics and the Canadian innovation ecosystem. With offices in Toronto, San Francisco, Dallas, and Pittsburgh, Waabi is growing quickly and looking for diverse, innovative and collaborative candidates who want to impact the world in a positive way. To learn more visit: The Senior IT Engineer will be responsible for supporting critical IT initiatives such as Network upgrades, building and managing compute and storage clusters as well as providing essential on-vehicle technical assistance. Key responsibilities will include ensuring network stability, implementing security measures, automating system deployments, and offering dedicated support to the engineering and research teams. This strategic hire will help maintain operational efficiency and support the integration of advanced technologies within our expanding Texas operations. You will:- Design and expand high-performance networks, computing, and storage.- Lead security initiatives and ensure compliance with security standards.- Oversee incident response planning and execution, ensuring timely and effective handling of security incidents.- Manage a fleet of linux servers including deployment, maintenance and upgrades.- Automate network and server deployments using Ansible, Terraform, etc.- Manage strict documentation of Network and Server infrastructure.- Work closely with Infrastructure, Compute, Support and Hardware teams- Coordinate closely with facility management to ensure HVAC, Cabling runs, UPS are functional.- Continuously look for opportunities to automate and improve systems.- You will be required to engage in physical activities with accommodation - lifting and moving material up to ~50 pounds. Qualifications:- Excellent communication skills with a customer service mindset.- Experience building high performance compute clusters.- Experience developing and scaling highly available storage clusters.- Experience with container orchestration.- Experience working with multiple cloud providers AWS, GCP, Azure etc.- Open-minded and collaborative team player with the willingness to take ownership.- Proven experience establishing and automating IT processes.- Proven experience setting up multi-site, high throughput, scalable networks.- Experience managing hybrid device environments (Mac, Windows, Linux). Bonus:- Experience working in startups.- Passionate about self-driving technologies, solving hard problems, and creating innovative solutions.Perks/Benefits:- Competitive compensation and equity awards- Health and Wellness benefits encompassing Medical, Dental and Vision coverage (for full-time employees only)- Unlimited Vacation- Flexible hours and Work from Home support- Daily drinks, snacks and catered meals (when in office)- Regularly scheduled team building activities and social events both on-site, off-site & virtually- As we grow, this list continues to evolve! Waabi is a technology start-up building technologies to transform the way the world moves. Join our talented team to be a part of the future and to make an impact! Waabi is an equal opportunity employer. We celebrate diversity and are committed to creating a supportive, inclusive, and accessible workplace for all our employees. We seek applicants of all backgrounds and identities, across race, color, ethnicity, national origin or ancestry, age, citizenship, religion, sex, sexual orientation, gender identity or expression, military or veteran status, marital status, pregnancy or parental status, caregiver status, disability, or any other characteristic protected by law. We make workplace accommodations for qualified individuals with disabilities as required by applicable law. If reasonable accommodation is needed to participate in the job application or interview process please let our recruiting team know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Union Technologies is reindustrializing America’s defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile™ model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. Headquartered in Dallas, Texas, UNION is dedicated to restoring America’s industrial strength and guaranteeing deterrence for the century ahead. We recently emerged from stealth with $50M in funding led by top-tier venture investors and strategic partners. Read more in our Press Release Job Summary We are seeking a Senior / Lead Automation Engineer to architect, implement, and continuously refine full‑scale automation solutions across our advanced manufacturing operations. You will own the automation roadmap—from concept and capital justification through deployment, ramp, and lifecycle optimization—driving safety, productivity, and quality at enterprise scale. Key Responsibilities: Automation Strategy & Roadmap • Define multi‑year automation vision aligned with business objectives and CapEx plans., • Prioritize high‑impact projects using ROI, risk, and throughput models., • Present strategic proposals to executive leadership and investors. System Design & Integration • Lead end‑to‑end design of robotic cells (e.g., Fanuc, ABB, KUKA) and custom machines for welding, machining, material handling, inspection, and packaging., • Specify PLCs, HMIs, motion control, and safety systems; author URS and functional specs., • Oversee vendor selection, FAT/SAT, and site acceptance. Operational Excellence & Continuous Improvement • Drive OEE, cycle‑time, and yield improvements through data analytics and iterative tuning., • Implement predictive maintenance, IIoT, and machine‑learning initiatives. Compliance & Leadership • Mentor a team of controls engineers, technicians, and external integrators., • Cultivate a culture of disciplined experimentation—“measured power, intelligently applied.”, • Lead by example, - go to the factory floor and show team members how to solve difficult problems by creating solid architecture and writing good code. Minimum Qualifications * B.S. in Electrical, Mechanical, Mechatronics, or Controls Engineering (M.S. preferred). * 10+ years progressive experience in automation, robotics, or advanced manufacturing; 5+ years in a lead or staff‑level role. * Expert in at least one major robot platform (Fanuc, ABB, KUKA, Yaskawa) and one PLC family (Allen‑Bradley, Siemens). * Strong grasp of OT networking (EtherNet/IP, Profinet, OPC UA) and MES/SCADA integration. * Proven leadership of cross‑functional teams and external integrators. * Excellent communication skills—able to translate technical detail into business impact for executives and investors. Preferred / Bonus Skills * Experience in defense or aerospace manufacturing environments (AS9100, ITAR). * Familiarity with metal forging manufacturing, machine vision, or AI‑driven process control. * PMP or equivalent project‑management certification. #LI-UNION Join the mission. We'll handle the move. Exceptional talent shouldn't be bound by geography. If you're ready to relocate to Dallas, TX and join us in reindustrializing America’s defense backbone, we'll make it easy—and for those who move quickly, additional incentives may be available. Compensation Range: $115K - $232K

Job Description BUILDING ENGINEER Location: Dallas, TX 75254 Pay: $25.00–$30.00/hour DOE Length: Contract-to-Hire Job Summary The Building Engineer works closely with the Chief Engineer and Property Manager to maintain and optimize building operations. Responsibilities include preventive maintenance, monitoring EMS for HVAC performance, responding to work orders (plumbing, lighting, HVAC, minor electrical repairs), and maintaining a safe, clean, and comfortable environment for tenants and staff. Professionalism, customer service, and teamwork are essential. Essential Duties & Responsibilities General Building Maintenance & Operations: • Maintain and operate all building equipment, grounds, and components, including door and ceiling tile repairs, painting, key control, irrigation, landscape maintenance, and lighting repairs., • Read, understand, and operate test equipment (thermometers, volt-ohm meters, amp meters)., • Review and interpret plans, construction documents, and schematic diagrams for wiring, plumbing, and building construction., • Monitor and coordinate outside contractors (landscaping, parking lot repairs, HVAC, plumbing, electrical, cleaning)., • Perform plumbing repairs (water closets, urinals, lavatories, flush valves, etc.)., • Ensure compliance with codes, regulations, and company safety directives., • Test and maintain emergency systems, including fire alarms, smoke detectors, fire suppression equipment, and emergency power systems., • Operate, test, and maintain mechanical systems such as pumps, chillers, cooling towers, fan coil units, VAV systems, fans, filters, pneumatics, and control systems., • Perform preventive maintenance per manufacturer recommendations and building protocols (e.g., filter changes, coil cleaning, greasing bearings, belt inspections, condenser and water system monitoring, cooling tower maintenance)., • Report directly to the Chief Engineer., • Build strong relationships with tenants, associates, and vendors through proactive, responsive, and service-oriented communication., • Assist with coordination of the Day Porter’s activities as needed.Qualifications, • High school diploma or GED., • Minimum of 4 years’ building maintenance experience in high-rise office, hotel, or multi-family properties., • Strong knowledge of mechanical, electrical, plumbing, and HVAC systems., • Ability to read blueprints, schematics, and technical manuals., • Excellent communication, teamwork, and customer service skills. #bgta #zipta BGSF is an Equal Opportunity Employer. We are committed to providing equal opportunities for employment to all qualified people, regardless of race, color, national origin, religion, sex, age, disability status, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. Company DescriptionBGSF, Inc A multi-division, publicly traded workforce solutions firm. Led by functional business experts in light industrial, multifamily and information technology. Comprehensive services, from individual fill-ins and placements through turnkey solutions. Independent branch office operating model creates a scalable platform that facilitates expansion. The management, range of service and experience to drive profitable growth for our temporary employees, our dedicated staff, our partner clients and the investors we serve.BGSF, Inc\r\n\r\nA multi-division, publicly traded workforce solutions firm.\r\nLed by functional business experts in light industrial, multifamily and information technology.\r\nComprehensive services, from individual fill-ins and placements through turnkey solutions.\r\nIndependent branch office operating model creates a scalable platform that facilitates expansion.\r\nThe management, range of service and experience to drive profitable growth for our temporary employees, our dedicated staff, our partner clients and the investors we serve.

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Electrical Lighting Designer II is a mid-level designer responsible for creating marked drawings, model development, and other documents showing equipment and device layouts and branch circuiting for power, lighting, and auxiliary drawings. In addition, this position provides calculations and documentation for the design of lighting and power systems, as well as details as required to define and clarify the intent of the design on drawings. This position requires moderate dotted-line supervision by a Designer III, an Engineer, the Engineer of Record, the Engineering Team Lead, or the Director of Engineering. WHAT YOU'LL DO: * Utilize visual lighting software and energy codes (such as International Energy Conservation Code and Title 24”) to create lighting designs. * Mark up branch circuit lighting and power plans and fill in panel board schedules with moderate * Perform Energy Code calculations, documentation, and local jurisdiction energy requirements with little supervision. * Apply and perform Rosendin standards for wire sizing, transformer feeders, and protection from published schedules. * Calculate power loads, size feeders, and determine the estimated demand load summary for a distribution system under the direction of a Sr. Designer or an Engineer. * Direct and coordinate signal and low voltage subcontractors with other trades, such as architectural, structural, mechanical, plumbing, fire protection, vertical transportation, kitchen equipment, and OFCI systems. * Create details as required to define installation for construction. * Provide the design lead function for small jobs. * Ability to review manufacturer submittals for electrical characteristics. * Layout Electrical Room, including clearances, with minimal oversight. * The duties and responsibilities describe the position's general nature and scope of work. This is a partial listing, and other responsibilities will be assigned based on the positions' role within the business unit. WHAT YOU'LL NEED TO BE SUCCESSFUL: * Strong Visual lighting software experience and understanding of Energy codes (such as International Energy Conservation Code and Title 24), including NFPA code requirements such as outlined in NEC and NFPA 101 * Knowledge of central battery inverters and battery backups in individual fixtures * Strong understanding of requirements for powering emergency lighting and Lighting Controls (such as Wattstopper) * Ability to do lighting fixture selection while including owners and architects for ”architectural” front-of-house type lighting * Site lighting experience including verification of light levels and considerations for issues such as light pollution * Experience in data centers preferred but not absolutely required WHAT YOU BRING TO US: * Some college or technical training in electrical engineering or architectural engineering related discipline * Minimum 3 years of experience as a Designer I * Can be a combination of educations, training, and relevant experience TRAVEL: * Up to 15% (Does not include local field visits) WORKING CONDITIONS: * General work environment - sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning * Noise level is usually low to medium; it can be loud on the jobsite. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. * Occasional lifting of up to 30 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401 K * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionFounded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Its products include the V-BAT and X-BAT aircraft, Hivemind Enterprise, and the Hivemind Vision product lines. With nine offices and facilities across the U.S., Europe, the Middle East, and the Asia-Pacific, Shield AI’s technology actively supports operations worldwide. For more information, visit . Follow Shield AI on LinkedIn, X, Instagram, and YouTube. Job Description:Founded in 2015, Shield AI is a venture-backed deep-tech company with the mission of protecting service members and civilians with intelligent systems. Our aircraft — including V-BAT and X-BAT — are redefining autonomous aviation with cutting-edge AI, advanced navigation, and next-generation vehicle architectures. We are building the best team in aviation to drive rapid development and deployment of X-BAT. We are looking for an entry-level Power Electronics Engineer who is excited to help bring X-BAT’s next-generation power systems to first flight. In this role, you will own a meaningful project directly tied to our power architecture critical path, while receiving direct mentorship from senior power and electrical engineers. We value first-principles thinking, hands-on engineering, and extreme ownership.What you'll do: • Own a power electronics design that directly impacts X-BAT system performance and major flight test milestones, supported by a senior engineer who provides technical guidance and review., • Contribute to the full hardware lifecycle including concept development, modeling, worst-case analysis, schematic capture, simulation, prototyping, bring-up, verification, integration, and flight test support., • Design and analyze low-voltage and high-voltage power systems including DC-DC converters, inverters, motor controllers, battery systems, power distribution, and protection circuits., • Design systems across power ranges from <1 kW low-power loads to >10 kW high-power applications while balancing efficiency, thermal constraints, EMI/EMC performance, and reliability., • Partner with ECAD engineers on PCB layout for power density, thermal performance, EMI mitigation, and manufacturability., • Execute hands-on board bring-up, debug, root-cause analysis, and validation using oscilloscopes, power supplies, electronic loads, and other test equipment., • Support environmental, stress, and qualification testing (HALT, vibration, temperature cycling) for aerospace-grade reliability., • Collaborate closely with Mechanical, Embedded, Software, Production, and Aircraft teams to ensure robust system integration and clear interface ownership., • Drive disciplined engineering practices including documentation, risk reduction, and closing the loop between analysis and test results.Required qualifications:, • B.S. in Electrical Engineering or equivalent., • Strong technical fundamentals in circuits, electronics, and power systems., • Hands-on experience (coursework, labs, clubs, or internships) with power electronics such as converters, motor drivers, batteries, or high-power systems., • Familiarity with electrical design tools (Altium, KiCad, etc.)., • Experience using lab equipment such as oscilloscopes, power supplies, e-loads, and multimeters. Shield AI is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity or Veteran status. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAs a senior engineer on our team, you will have the opportunity to build solutions from the ground up, lead projects, and take real ownership of products and features. Our rapid growth and open culture provide the freedom to create, experiment, and contribute. Autonomy and curiosity are not just encouraged, they are essential. Much of your work will focus on our proprietary Level5 platform, an industry-leading analytics and management tool trusted by some of the nation’s largest and most sophisticated companies. The technology you create will be relied on by top energy experts to manage and analyze billions of dollars’ worth of procurement contractsWhat you’ll be doing: • Ideate, develop, release, and maintain features across our core system., • Work directly with large data pools that power analysis, historical tracking, and client management., • Make key technical decisions in open forums, guiding the team toward maintainability and growth., • Handle migrations and refactors to stay up to date with modern tools and best practices., • Own integrations with external services and middleware for data ingest, processing, and automation., • Improve observability, performance, and technical mapping across the platform., • Take initiative on everything from quick bug fixes to major re-architecture efforts., • Use your expertise to empower teammates and refine development practices., • Collaborate with stakeholders across the business, communicating clearly about trade-offs and solutions., • Enhance productivity with AI-assisted tools such as JetBrains, Cursor, Claude Code, and CodeRabbit., • Stay current with the latest frameworks, design patterns, and development practices.Bonus points if you bring experience with AI/agentic workflows (tool use, retrieval pipelines, orchestration) or energy industry expertiseWhat you’ll bring:, • Languages & Frameworks, • PHP 8.x, Laravel (Eloquent, Queues/Jobs, Events, Policies, Resources, Migrations), • MySQL (indexes, query plans, transactions, deadlock diagnosis, migration strategies), • Python (scripting automations & AWS Lambdas), • AWS (RDS MySQL, Lambda, DynamoDB, ElastiCache, ECS, Step Functions, EventBridge, etc.), • Bonus: AWS ML (Athena/SageMaker w/ Jupyter Notebooks), • Containers & IaC (Docker, Ansible), • CI/CD (GitHub Actions for build/test/deploy automation), • Observability & QA (Sentry, CloudWatch, metrics/logs/traces), • Systems thinking with clear boundaries and contracts, • Event-driven patterns (async processing, backpressure strategies), • Safe refactor and migration strategies (blue/green, canary, expand-and-contract, feature toggles), • Performance & reliability (caching, read/write splitting, query tuning)

Job Description The Application Engineer acts as a key technical liaison between customers, the sales team, and engineering, ensuring generator systems are properly specified and integrated to meet project requirements. This role is instrumental in influencing project specifications by providing accurate technical information and serving as a trusted resource for the consulting engineering community throughout the territory to promote Caterpillar equipment standards. Essential Responsibilities: • Collaborate with sales teams and customers to define technical requirements and recommend customized generator solutions, • Interpret specifications, load requirements, and site conditions to select and size generator systems, including auxiliary components, • Develop technical documentation, including drawings and submittals, to support proposals and project execution, • Coordinate with internal teams (engineering, production, and service) to ensure correct configuration and successful project delivery, • Provide technical expertise and application support to the sales team and customers, including onsite presentations and consultations, • Assist with troubleshooting and resolving complex integration and application issues, • Stay informed on relevant codes and standards (e.g., NFPA, NEC), as well as emerging technologies in power generation, • Support special projects as assigned by the EP Sales Manager, • Adhere to all safety policies and procedures; maintain compliance with company standards, • Perform other duties as assigned Qualifications & Skills: • Deep understanding of power generation principles and application engineering best practices, • Proficiency in sizing and specifying generator systems, including ATS, switchgear, and control systems, • Strong working knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Access), • Familiarity with federal, state, and local regulations, including emissions and fire protection standards, • Excellent business acumen, with a high level of accuracy and attention to detail, • Knowledge of HOLT CAT Commercial Engine Sales operations and Dealer Business System (DBS) is a plus, • Strong communication and interpersonal skills, including technical writing and presentations, • Proven critical thinking and problem-solving abilities, • Strong organizational skills and the ability to manage multiple projects simultaneously under tight deadlines, • Ability to provide value-driven consultation and influence technical project specifications, • Resilient under pressure, with a professional and collaborative demeanor, • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field, • 2+ years of experience in an application, systems, or sales engineering role—preferably within power generation or related industries None Travel: • Travel up to 45%, and some overnight travel may be required, • This position involves extended periods in a stationary position; additionally, occasional movement inside the office to access office machinery, file cabinets, etc., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines Work Environment: • This job is generally performed in a professional office environment, • Occasionally works outdoors and may be exposed to weather extremes conditions that include inclement weather, heat, cold, and humidity Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT

Job Description Location: DFW, TX (On-site) Employment Type: Full-Time Salary: $100,000 - $150,000 Annually (Based on Experience) Company Introduction: This opportunity is with a nationally recognized leader in large-scale commercial and healthcare construction. The organization is known for its commitment to safety, innovation, and technical excellence, consistently delivering high-profile projects throughout the United States. The current focus is a $500 million healthcare facility in the Fort Worth area, followed by additional assignments across the Dallas–Fort Worth region. The company offers long-term stability, an employee ownership structure, and a culture that values collaboration, accountability, and professional growth. Role Overview: The Electrical Engineer will be responsible for leading the electrical scope on major commercial and healthcare construction projects. This includes managing design coordination, estimating, subcontractor relationships, installation oversight, and system commissioning. The ideal candidate will have deep expertise in power distribution, lighting, and low-voltage systems, along with a proven ability to manage the electrical components of complex, large-scale builds exceeding $200 million in value. This role offers the opportunity to be part of a technically advanced, collaborative team shaping critical infrastructure across the DFW area. Core Responsibilities: • Lead the electrical scope of work, ensuring systems meet design intent, quality standards, and schedule expectations., • Develop and evaluate electrical estimates, budgets, and system analyses during preconstruction., • Review electrical design options and provide value-engineering recommendations to optimize cost and performance., • Coordinate with design teams, subcontractors, and field personnel to ensure seamless MEP system integration., • Oversee installation of electrical systems, including switchgear, lighting, grounding, emergency power, and low-voltage networks., • Perform site inspections to confirm compliance with plans, specifications, and safety standards., • Manage and verify commissioning and testing of electrical systems, including power distribution and life-safety systems., • Review shop drawings and submittals for accuracy and constructability., • Participate in subcontractor bid reviews, scope development, and contract recommendations., • Mentor junior engineers and contribute to continuous improvement in MEP best practices. Required Background: • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Architectural Engineering, or related field (or equivalent experience)., • Minimum 10 years of electrical engineering or construction experience, preferably within a general contracting or design-build environment., • Proven success delivering large-scale commercial projects valued at $200 million or more., • Strong technical understanding of building electrical systems, including medium/low-voltage power, lighting, and control systems., • Ability to interpret and analyze electrical drawings, specifications, and commissioning documentation., • Experience managing subcontractors and coordinating with cross-functional project teams., • Excellent problem-solving, communication, and organizational skills., • Valid driver’s license and willingness to work across the DFW region as needed., • Professional Engineer (PE) license or active progress toward licensure. (Preferred), • Previous experience with healthcare or hospital electrical systems (critical power, emergency, and life safety). (Preferred), • Familiarity with BIM coordination, construction technology, and commissioning processes. (Preferred), • Background in power distribution design, lighting systems, and low-voltage integration. (Preferred), • Experience leading MEP coordination meetings and resolving field design challenges. (Preferred) Compensation & Perks: • Base salary up to $150,000, depending on experience., • Car allowance provided for project-related travel., • Annual performance bonus., • Comprehensive benefits package including:, • Medical, dental, and vision insurance, • 401(k) with company contributions, • Employee Stock Ownership Plan (ESOP), • Life and disability insurance, • Paid time off, holidays, and parental leave, • Professional development and continuing education opportunities., • Long-term growth potential within a respected, employee-owned organization. Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Mileage reimbursement, • Opportunities for advancement, • Paid time off, • Paid training, • Vision insurance Work Location: In person Job Type: Full-time Skills • Lead the electrical scope of work, • Develop and evaluate electrical estimates, • Review electrical design options and provide value-engineering recommendations, • Coordinate with design teams, subcontractors, and field personnel to ensure seamless MEP system integration., • Oversee installation of electrical systems, • Perform site inspections to confirm compliance with plans, • Manage and verify commissioning and testing of electrical systems, • Review shop drawings and submittals for accuracy and constructability., • Participate in subcontractor bid reviews, • Mentor junior engineers and contribute to continuous improvement in MEP best practices.

Job Description Lead Mechanical Engineer Location: Dallas, TX or Spartanburg, SC (Relocation Offered) Overview We are seeking a Mechanical Engineer to define and lead the mechanical design, operations, and thermal strategy for next-generation AI-scale data centers. This role sits at the intersection of engineering innovation and high-performance computing—driving breakthroughs in cooling, efficiency, and mechanical reliability for hyperscale environments. Reporting directly to the Chief Engineer, this leader will be the principal authority for mechanical systems design and operations, guiding the evolution of advanced cooling topologies that support GPU-dense workloads and large-scale AI clusters. The ideal candidate combines deep technical mastery with proven leadership to architect sustainable, efficient, and globally replicable systems. Key Responsibilities Mechanical Architecture & Strategy • Architect and own the end-to-end mechanical systems roadmap for AI-scale compute environments., • Define internal design standards, templates, and repeatable system patterns across all facilities to ensure uniformity, compliance, and operational excellence., • Lead multi-disciplinary mechanical teams through design, construction, commissioning, and lifecycle operations., • Develop and deploy next-generation cooling technologies such as direct-to-chip liquid cooling, immersion systems, and rear-door heat exchangers., • Oversee thermal modeling, CFD analysis, and airflow optimization to maintain ideal performance at maximum density., • Evaluate and pilot emerging technologies—phase-change cooling, AI-assisted thermal modeling, and novel heat-transfer materials—to push mechanical boundaries., • Direct mechanical system commissioning, testing, and handover to operations with measurable KPIs for uptime and efficiency., • Implement predictive analytics and real-time monitoring platforms to enhance system visibility, reliability, and maintainability., • Lead root-cause analysis of mechanical incidents and deploy resilience strategies that improve system availability and fault tolerance., • Bachelor’s or Master’s degree in Mechanical Engineering., • 12+ years of experience in data center, mission-critical, or energy-intensive environments., • Deep expertise in thermodynamics, fluid dynamics, HVAC, and advanced cooling technologies., • Demonstrated leadership in hyperscale or GPU-accelerated mechanical system design., • Strong background in CFD modeling, system optimization, and operational analytics., • Proven ability to guide multi-disciplinary engineering teams and collaborate across electrical, controls, and operations groups., • Strong communicator capable of influencing both technical teams and executive leadership. This is a high-impact leadership opportunity to define the mechanical DNA of AI-scale infrastructure. You will architect the systems that enable next-generation compute performance—balancing thermodynamic efficiency with sustainability and scalability. As a Mechanical Systems Architect, you will directly shape how the world’s most advanced data centers operate, setting the standard for performance, reliability, and innovation in the AI era. Company DescriptionWho We Are GTN is the leader in technical staffing, leveraging innovation to drive next-generation recruiting to Fortune 2000 companies. What We Do We provide Scalable Technical Staffing solutions encompassing SOW, staff augmentation, and direct hire placement for Fortune 2000 companies, with niche service offerings in Cyber Security, Digital, Field Services, and Professional Services. Our recruiting teams are specialized, certified, and have endured rigorous technical boot camps and ongoing required educational courses and meetups. What Proof We Have We have experience in scalable IT Staffing since the year 2000. Our IT experts have helped Fortune 2000 corporations embrace the cybersecurity and digital space, with many of our experts remaining on contract with clients for 8+ years. Our staffing experts have been engaged to speak at cybersecurity conferences, and our teams are certified and specialize in divisions focused around cyber, digital, field, and professional services. Why People Want It Our valueWho We Are\r\nGTN is the leader in technical staffing, leveraging innovation to drive next-generation recruiting to Fortune 2000 companies.\r\n\r\nWhat We Do\r\nWe provide Scalable Technical Staffing solutions encompassing SOW, staff augmentation, and direct hire placement for Fortune 2000 companies, with niche service offerings in Cyber Security, Digital, Field Services, and Professional Services. Our recruiting teams are specialized, certified, and have endured rigorous technical boot camps and ongoing required educational courses and meetups.\r\n\r\nWhat Proof We Have\r\nWe have experience in scalable IT Staffing since the year 2000. Our IT experts have helped Fortune 2000 corporations embrace the cybersecurity and digital space, with many of our experts remaining on contract with clients for 8+ years. Our staffing experts have been engaged to speak at cybersecurity conferences, and our teams are certified and specialize in divisions focused around cyber, digital, field, and professional services.\r\n\r\nWhy People Want It\r\nOur value

Job Description PHASOR Engineering Inc. is a dynamic Alberta based company specializing in engineering, design, and testing / commissioning of medium to high voltage electrical facilities. Focused on providing the most cost-effective and efficient solutions to power system engineering, we are involved in a diverse range of projects from preliminary engineering through to the commissioning and startup. We are currently seeking a highly motivated and experienced Electrical Engineering Technologist, PSE, or Engineer to join our field services team on a full time basis. If you are an excellent communicator and skilled problem-solver with strong attention to detail, we offer a dynamic work environment where you will be continuously challenged in all aspects of the testing and commissioning process. As a condition of employment, successful applicants agree to undergo a Backcheck screening, which includes identity verification and a criminal background check. Responsibilities: • Manage and lead a commissioning crew of workers., • Testing and commissioning of MV/HV power system protection & control schemes in the utility, power generation, and oil & gas industry., • Read and interpret drawings and troubleshoot / resolve technical issues., • Train/develop employees to ensure highest performance standards are met., • Report preparation and submission., • Assist with generation of commissioning startup procedures or work instructions., • Ensure compliance with all safety practices as per corporate, client, and industry standards., • The successful candidate should possess a Bachelor’s Degree in Electrical Engineering, Power Systems Electrician Journeyman Ticket, or an Electrical Engineering Technologist Diploma from a recognized institute., • Eligible for registration with APEGGA , ASET, or similar., • Comprehensive understanding of key principles of electrical power system protection and controls including SCADA, relay protection, metering, equipment functionals, and telecom networks., • Minimum 5+ years of proven experience in the medium voltage and/or high voltage utility substations and power generation industry with experience in a supervisory role leading and running projects in greenfield and brownfield substations., • Relay testing of microprocessor-based protection IED’s (SEL, ABB, Siemens, GE, etc.) with fully automated test equipment (Omicron CMC356) and test data management., • Experienced in high voltage primary equipment testing and commissioning involving power transformers, reactors, circuit breakers, CT’s, PT’s, surge arrestors, disconnect switches, cap and reactor Banks, etc., • Testing and commissioning as per NETA/IEEE/IEC standards., • Strong understanding of CSA Z462 safety standards., • Strong interpersonal and communication skills and an extreme attention to detail are essential., • Knowledge of the Microsoft office software suite of programs coupled with strong computer skills., • Excellent organizational skills and ability to manage a wide variety of issues simultaneously., • Strong analytical, risk assessment and problem solving skills., • NETA Testing Certification an asset., • Must be legally able to work in Canada, VISA Sponsorship is not available for this position., • Valid driver’s license with clean driving record., • Typical out of town working shifts are (but not limited to) 10/4, 14/7, 14/14, 21/7, 21/14., • Working hours are generally from 7am - 5:30pm at 10hrs/day., • Daily work hours and shifts are subject to change based on project requirements, applicants must be flexible to accommodate these changes when required. Phasor Engineering Inc. offers a competitive compensation and benefits package and excellent opportunities for growth and advancement. We are an Equal Opportunity Employer committed to a diverse workforce. While we appreciate all applications we receive and the applicant's interest in our company, only those who are selected for an interview will be contacted. Other names for these roles include: Commissioning Technologist, Commissioning Engineer, Commissioning Lead, Commissioning Specialist, Commissioning Manager, Field Service Specialist, Field Service Technologist/Technician, Protection and Control Technologist/Technician, Protection and Control Specialist, Protection and Control Testing Engineer, Relay Technologist/Technician, Power System Technician, Power System Electrician, PSE, Electrical Engineering Technologist Benefits • Dental care, • Disability insurance, • Employee assistance program, • Extended health care, • Life insurance, • On-site gym, • On-site parking, • Paid time off, • RRSP match, • Vision care, • Wellness program

Job DescriptionAbout WellfitAt Wellfit, we’re reimagining how treatment planning and benefit eligibility power the future of patient care.Our Plans portfolio enables providers to configure, manage, and deliver personalized treatment plans that align with payor rules, patient needs, and financial transparency. As our platform scales, we’re expanding our engineering organization to strengthen system flexibility, improve delivery precision, and meet the evolving needs of providers, patients, and partners across the healthcare ecosystem. Position OverviewAs a Full Stack Software Engineer on the Plans team, you’ll be instrumental in building and evolving the systems that drive treatment planning, plan configuration, and eligibility logic. This is a 50/50 full stack role—balancing robust backend development with intuitive, performant user experiences that empower providers and patients alike. You’ll collaborate closely with Product, Architecture, and DevOps to deliver scalable, high-impact solutions that transform how care plans are created, priced, and delivered. Key Responsibilities• Design, develop, and maintain full-stack web applications and APIs for the Plans portfolio, including treatment planning, provider plan configuration, and eligibility workflows.• Build and integrate with third-party systems (e.g., Sika, Next Health) to ensure seamless exchange of benefit, pricing, and eligibility data.• Collaborate with Product Owners and Business Analysts to translate business logic around plan rules, eligibility, and pricing into scalable technical solutions.• Develop and optimize modular, reusable components that support configurable plan templates and provider customization.• Work with DevOps to manage CI/CD pipelines, test environments, and automated deployments to ensure reliable, repeatable releases.• Implement best practices in software engineering, including TDD, BDD, and clean architecture.• Partner with Architecture to evolve our microservices-based design for better performance, flexibility, and maintainability.• Contribute to the continuous improvement of engineering processes, system monitoring, and documentation. Qualifications• Bachelor’s degree in Computer Science, Engineering, or related field (or equivalent practical experience).• 5–7 years of experience in full-stack development with ASP.NET, C#, .NET Framework, and SQL.• Front-end experience using modern JavaScript frameworks such as React, Angular, or Vue.• Experience working with Cloud APIs and major platforms (AWS, Azure, or GCP).• Familiarity with microservices, DevOps, and CI/CD pipelines.• Experience with eligibility, benefit configuration, or healthcare data systems is a plus.• Exposure to Domain Driven Design and API-first architectures preferred. Ideal Candidate Profile• Thrives on solving complex technical challenges tied to real-world healthcare and fintech systems.• Analytical, detail-oriented, and able to balance scalability with simplicity.• Strong communicator who collaborates effectively with cross-functional partners.• Passionate about writing clean, maintainable code that drives measurable business and patient impact.• Self-motivated, with a mindset of continuous improvement and technical curiosity. Why Wellfit• Shape the Future of Care: Build the systems that redefine how providers deliver treatment plans and patients understand their benefits.• Collaborate in a Hybrid Model: 3 days onsite in Dallas, 2 days remote.• Comprehensive Benefits: Medical, dental, vision, and generous PTO.• Invest in Your Future: Competitive salary, 401(k) matching, and performance-based bonuses.• Be Part of a Growth Story: Join a profitable, fast-scaling fintech company making healthcare more transparent and accessible.Alongside a competitive annual bonus, we offer a 401(k) with up to a 4% match, generous paid time off, and comprehensive healthcare benefits. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Crusoe's mission is to accelerate the abundance of energy and intelligence. We’re crafting the engine that powers a world where people can create ambitiously with AI — without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that’s setting the pace for responsible, transformative cloud infrastructure. Senior Engineer, Load Interconnection About Crusoe Crusoe is on a mission to align the future of computing with the future of the planet. We aim to unlock stranded energy and deliver it to the energy-intensive computation that powers our world. As a pioneer in the sustainable energy and digital infrastructure space, we develop and operate infrastructure that converts wasted, otherwise-flared natural gas and curtailed renewable energy into electricity to power energy-intensive computation. We're a team of innovators, engineers, and problem-solvers dedicated to building a more sustainable and efficient energy future. (#INDCORP) The Role As a Senior Engineer, Load Interconnection at Crusoe, you will play a critical role in expanding our energy infrastructure and integrating our large-load facilities into the electric grid. You will be a key individual contributor, focusing on the complex challenges of connecting and optimizing our operations within the grid, including ERCOT, SPP, MISO, PJM etc.. This position requires deep technical expertise in power systems and a proactive approach to problem-solving in a rapidly evolving industry. This role will be fully on-site at either our Denver (255 Fillmore Street) or San Francisco (225 Bush Street) offices. What You’ll Be Working On: * Performing and supporting grid integration studies for large-load facilities. * Running technical power flow studies and supporting the submission of interconnection applications for Crusoe's facilities, ensuring technical data verification and sufficiency at various stages within ERCOT and SPP markets. * Managing transmission injection Performing load deliverability studies in ERCOT and SPP based on regional criteria. * Contributing to the technical development of new hires, sharing knowledge and best practices in grid integration. * Working with internal teams to understand project needs, drafting technical specifications, and supporting the business development team on the technical aspects of proposals related to grid integration. * Staying abreast of industry trends, attending conferences, and supporting other travel as required for projects and professional development * Being responsible for the dynamic modeling of various large-load facilities to meet the modeling requirements for ERCOT and SPP, using tools such as PSS/e and PSCAD-EMTDC. What You’ll Bring to the Team: * Master's degree in Power Systems with 3+ years of experience in power system or bachelor’s and 5+ years of experience in planning, system modeling, and grid code compliance studies. * Strong working knowledge of ERCOT or SPP interconnection procedures * Working knowledge of TARA, PSS/e and/or PSCAD-EMTDC. * Excellent communication, problem-solving, and report writing skills. Bonus Points: * Experience with other ISO/RTO markets (e.g., CAISO, MISO, PJM, WECC, SERC). * Working knowledge of PowerWorld Simulator, ETAP, TSAT, and ASPEN OneLiner. * Working knowledge or prior experience with scripting languages such as R or Python. Benefits: * Industry competitive pay * Restricted Stock Units in a fast growing, well-funded technology company * Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents * Employer contributions to HSA accounts * Paid Parental Leave * Paid life insurance, short-term and long-term disability * Teladoc * 401(k) with a 100% match up to 4% of salary * Generous paid time off and holiday schedule * Cell phone reimbursement * Tuition reimbursement * Subscription to the Calm app * MetLife Legal * Company paid commuter benefit; $300 per month Compensation: Compensation will be paid in the range of $120,000 - $150,000. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Commissioning Lead Mechanical - SME - Remote / Traveler - Dallas, TX Our client is an Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Lead the overall mechanical commissioning process, follow standards set by the organization and oversight of multiple commissioning projects for large data center projects. This candidate will act as a Commissioning Subject Matter Expert (SME) to ensure that commissioning experts follow commissioning standards, adhere to a thorough quality management / QC process and procedures that validate and document client's systems. This candidate will also handle any technical commissioning issues for their data center clients. Responsibilities: • Lead multiple Commissioning Projects consists of a full team of commissioning engineers and commissioning project managers on a wide range of Data Center Commissioning projects, • Will not have manage staff at the onset ; candidate will be managing the technical aspect of projects and act as a technical resource commissioning teams, • Will grow into a technical management role with people management in 6-18 month timeframe, • Ensure Commissioning standards are being followed for: Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Ensure that the overall Commissioning process is being followed with the highest of standards:, • Commissioning test procedures and reports, • Commissioning logs, equipment checklist, and other tools to track commissioning projects, • Comprehensive reports which include:, • recommendations for optimizing building operations, • functional checklists, • list of deficiencies, • equipment operation, • maintenance manuals, • Have the team follow Commissioning Standards:, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Functional tests for various building MEP systems, such as: fire alarm and control systems, HVAC, Chillers, CRAC units, normal and standby electrical distribution systems, UPS, standby generators, and emergency lighting, etc., • System Assembly;, • Commission plan preparation, • Follow company QC process and procedures, • Interface with clients, contractors, equipment vendors and owners agents as needed;, • Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • Verification of commissioning results of test reports, • 5 to 10 + years experience in the Electrical / Mechanical Commissioning Field, • Bachelor's / Associates Degree as an Electrical Engineer / Mechanical Engineer a plus, • A/E experience working in complex facilities or mission critical projects, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Experience with Level 1-5 commissioning, • Experience managing commissioning teams and developing plans for large scale commissioning projects, • Experience with IEEE / ASHRAE procedures and protocols a plus, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project, • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy Nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.) After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionCompany Description Smiths Interconnect is a leading provider of high reliability connectivity products and solutions serving segments of aerospace and defense, medical, semiconductor test, and industrial markets. It designs and manufactures technically differentiated electronic components, microwave, optical and radio frequency products and sub-systems that connect, protect and control critical applications. Smiths Interconnect is part of Smiths Group plc and has 21 Sales, R&D and Manufacturing locations in 12 countries, including Canada, US (Florida, Texas, Kansas, and Maryland), Mexico, Costa Rica, France, Germany, Italy, UK, Tunisia, India, China, and Singapore. Job Description As our Sr. Quality Assurance Engineer in Manufacturing, you'll be the guardian of greatness, the defender of excellence, and the superhero of standards! Your mission, should you choose to accept it, is to establish a set of activities that will make our quality requirements shine brighter than a diamond in a goat's... well, you know. You'll be identifying which activities are the real MVPs (Most Valuable Processes) and ensuring we stick to them like glue sticks to, well, everything. This includes analysis, reviews, audits, demonstrations, inspections, testing, and metrics to ensure our systems are as capable as a Swiss Army knife and as controlled as a Jedi master. We're looking for a proactive quality leader who can drive lean methodologies and behaviors faster than a Formula 1 car! Responsibilities: As our Sr. Quality Assurance Engineer, you'll be the maestro of metrics, the guru of guidelines, and the wizard of workflows. Your quest is to provide quantitative and qualitative reporting that's so good, it'll make various functions and levels in the enterprise stand up and applaud. Here's what you'll be juggling (metaphorically, of course - we don't actually expect you to juggle... unless you want to): • Be the ringmaster of our audit circus, ensuring internal, external, and 3rd party audits (ISO9001, AS9100, ISO14001, OHSAS18001, and others) are completed on schedule. No clowning around!, • Channel your inner Sherlock Holmes to establish and ensure effective root cause analysis and closed-loop corrective action updates in various databases. It's like solving a mystery, but with fewer deerstalker hats and more spreadsheets., • Become the David Copperfield of quality indicators, making critical-to-quality (CTQ) data appear out of thin air (well, not really, but you get the idea). Present this magic show of metrics to senior staff members and watch their jaws drop!, • Be the customer's BFF by understanding their requirements and ensuring compliance through root cause corrective action planning and implementation. It's like being a therapist for our processes!, • Transform into the Pied Piper of quality tools, leading various departments to effectively deploy 8D, 5 Why, FMEA, Control Plans, and 7 QC Tools. Your tune? The sweet melody of continuous improvement!, • Become the guardian of the Change Management Review Process, ensuring requirements are as fully identified and validated as a celebrity's Twitter account., • Be the superhero of Environmental, Health, and Safety Management Systems, as well as the Quality Management System. Your superpower? Maintaining capability and control!, • Contribute to department functions like you're adding the secret sauce to a gourmet burger - meetings, goals, training, you name it!, • Review High Reliability orders with the precision of a jeweler examining a rare diamond. C of C and data summary requirements are your best friends now!, • Be ready to tackle any additional assignments faster than a caffeinated cheetah. Your department supervisor might have some surprises up their sleeve! Remember, in this quality quest, you're not just pushing papers - you're crafting the epic saga of our company's excellence! So grab your cape (or lab coat), polish your magnifying glass, and get ready to make quality not just a priority, but a thrilling adventure! Qualifications Your Superhero Toolkit ️‍♂️️ Brain Power and Battle Scars • You've got a BS in Engineering (that's "Brilliantly Smart," of course) or 5-10 years of quality-crusading experience. A combination of both? Even better!, • You've survived the treacherous terrain of Lab Environments and lived to tell the tale, • Your quality knowledge is so sound, it echoes through the halls of excellence, • You can decipher ancient scrolls... or at least safety rules, operating instructions, and procedure manuals, • Your writing skills are so sharp, they could cut through red tape. Detailed reports? Correspondence? You've got it!, • You're the Sherlock Holmes of data analysis, with a Watson-level talent for verbal and written presentations, • Math doesn't scare you; you juggle statistical quality tools like SPC, CPK, and DOE with the grace of a circus performer, • You wield calipers, micrometers, and optical comparators like a Jedi uses a lightsaber, • Work orders, test manuals, and engineering specs are your bedtime reading. You extract product info faster than a squirrel gathering nuts for winter Secret Identity: Please state if you're a US Citizen or permanent resident. We promise we're not asking for nefarious reasons! Additional Information We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Electrical Engineer - Dallas, TX Our client is a Engineering Design Company that has a national footprint and specializes in MEP critical facilities design. They provide design, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience designing electrical systems specifically for mission critical data centers. They will have experience and in-depth knowledge of Electrical Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. Working and communicating with internal team and clients effectively is a must. Responsibilities: • Create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for small to medium sized data center facility design projects, • Develop electrical construction documents utilizing primarily AutoCAD MEP and Revit MEP, • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Production Engineering also available if field work is not your thing, • Work with Management to respond to RFPs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • 2-10 years experience, • Bachelor's Degree in Electrical Engineering, • EIT / Licensed PE a Plus, • LEED AP a plus, • Revit experience a Plus, • Experience developing Revit MEP and AutoCAD MEP models, • Experience with Electrical Power Systems such as UPS (Uninterruptible Power Supply), Generators, Switchgears, and Batteries is required., • Experience working on complex facilities design for Data Centers Mission Critical a plus, • Light travel as needed, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well and work well in a team environment After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Job Title: Controls Engineer Job Description As a Controls Engineer, you will play a vital role in the development and evolution of our standard product lines, focusing on packaged equipment such as pump stations, water treatment systems, control panels, and power distribution equipment. Your work will emphasize creating robust, high-performance solutions that are scalable and repeatable. You will collaborate with product management, sales, customers, engineering, and manufacturing to define requirements, develop control architectures, and bring new product features from concept to production release. This role requires a strong technical in controls, excellent problem-solving skills, and effective communication across disciplines. Responsibilities • Translate product requirements and market needs into control system specifications for standard product families., • Participate in product definition and roadmap discussions to identify new control features and standard configurations., • Define and maintain control system architectures for each product line, including I/O allocation and communication networks., • Develop, program, and maintain PLC, HMI, and other control solutions for standard products., • Create reusable code libraries, templates, and standard function blocks to support product families., • Ensure software implementations meet functional, performance, reliability, security, and maintainability requirements., • Collaborate with the engineering team to design control systems that integrate seamlessly with packaged equipment., • Assist with selecting standardized hardware components that support product strategy and cost targets., • Create and maintain detailed schematics, wiring diagrams, and panel layout drawings using CAD software., • Perform designs in accordance with job specifications and governing standards such as UL508A and NEC., • Integrate control systems with motors, pumps, valves, and other subsystems, ensuring reliable operation., • Develop and execute test plans, including bench testing and support for factory and site acceptance tests., • Support pilot builds and initial production runs by troubleshooting control-related issues., • Collaborate with manufacturing to develop and improve test procedures and standard work instructions., • Investigate field issues related to controls, perform root-cause analysis, and implement corrective actions., • Maintain accurate documentation of control system designs, code versions, and configuration standards., • Ensure control systems comply with applicable electrical standards, safety codes, and design guidelines., • Provide training and technical support to internal teams on the operation and maintenance of control systems., • Bachelor’s degree in Electrical Engineering, Automation, Computer Engineering, or a related field., • Proven experience (3+ years) in controls engineering in an OEM, product development, or packaged systems environment., • Strong understanding of electrical principles, control theory, and power distribution., • Experience with software platforms such as RSLogix, Studio 5000, FactoryTalk View, EcoStruxure, and others., • Knowledge of industry standards and regulations related to control panel design and electrical systems., • Embedded systems knowledge including programming languages such as C#, C++, Python, and JavaScript., • Experience with industrial networking/IoT technologies like MQTT and Ethernet/IP. The work environment consists of an office setting with collaborative manufacturing design work. The typical work schedule is Monday to Friday, with start times between 6am and 7am. There is no travel required. This role requires adaptability to evolving technologies in a fast-paced product development environment. Job Type & Location This is a Permanent position based out of Dallas, TX. Pay and Benefits The pay range for this position is $100000.00 - $125000.00/yr. Benefits Include: • Medical, Dental, and Vision coverage, • Employer-paid Teladoc, • 401K with matching, • Paid holidays, • Paid Time Off, • Company-wide quarterly performance bonus Workplace Type This is a fully onsite position in Dallas,TX. Application Deadline This position is anticipated to close on Dec 16, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Union Technologies is reindustrializing America’s defense manufacturing base with a first-of-its-kind Factories-as-a-Stockpile™ model, integrating advanced robotics, manufacturing, and software into sovereign factory systems at scale. Headquartered in Dallas, Texas, UNION is dedicated to restoring America’s industrial strength and guaranteeing deterrence for the century ahead. We recently emerged from stealth with $50M in funding led by top-tier venture investors and strategic partners. Read more in our Press Release We are seeking a Senior / Lead Electrical Engineer to design, integrate, and improve the electrical‑controls backbone of our next‑generation manufacturing lines. You will own system architecture—from concept and specification through commissioning and continuous improvement—ensuring every robot, drive, and sensor operates in concert with our production goals. Key Responsibilities: Controls Architecture & Strategy • Define the multi‑year controls roadmap—hardware standards, network topologies, and safety objectives—aligned with business growth., • Establish best‑practice design guidelines for panels, wiring, and device selection. System Design & Specification • Lead the electrical design of robotic cells, automated test rigs, and high‑speed material‑handling equipment., • Produce single‑line diagrams, panel layouts, and BOMs; oversee contractor and vendor deliverables., • Select PLCs, safety relays/PLCs, drives, vision systems, and field instrumentation. Integration & Commissioning • Coordinate cross‑functional teams to bring new lines from dry‑fit through full‑rate production., • Plan and execute FAT/SAT, system validation, and hand‑off to operations., • Troubleshoot controls and power issues to ensure seamless ramp‑up. Data & Connectivity • Collaborate with OT/IT teams to ensure reliable network communication (EtherNet/IP, Profinet, OPC UA) and accurate data capture for OEE and predictive‑maintenance dashboards. Project Leadership • Manage $1 M–$10 M automation projects: scope, schedule, budget, and risk., • Present project status and KPIs to executive leadership and stakeholders. Safety & Compliance • Own electrical and functional‑safety standards—NFPA 70/70E, ISO 13849, IEC 62061—and perform risk assessments and validations., • Ensure UL / CE and ANSI/RIA compliance for all automated equipment. Continuous Improvement • Drive OEE gains by identifying cycle‑time constraints, power‑quality issues, and reliability gaps., • Implement energy‑efficiency and condition‑monitoring initiatives. Technical Mentorship • Guide a team of engineers and technicians; review designs, share best practices, and foster a culture of disciplined engineering. Minimum Qualifications: * B.S. in Electrical, Controls, or Mechatronics Engineering (M.S. a plus). * 10+ years in industrial automation / controls, with 5+ years leading complex projects. * Demonstrated success delivering multiple high‑throughput automation cells or lines—from concept through sustained production. * Strong knowledge of PLC/HMI hardware families, robotics platforms (Fanuc prefered), industrial networks, and functional‑safety standards. * Proven ability to translate technical issues into clear business impact for executive stakeholders. Preferred / Bonus Skills: * Experience in defense, aerospace, or other regulated manufacturing environments (ITAR, AS9100). * Familiarity with collaborative robots, AMRs/AGVs, machine‑vision inspection, or edge‑analytics solutions. * PMP or Six Sigma certification and experience with Lean manufacturing principles. #LI-UNION #ZR Join the mission. We'll handle the move. Exceptional talent shouldn't be bound by geography. If you're ready to relocate to Dallas, TX and join us in reindustrializing America’s defense backbone, we'll make it easy—and for those who move quickly, additional incentives may be available. Compensation Range: $115K - $232K

Job DescriptionSr Electrical Engineer PE / Team Leader - Hybrid This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $120,000 - $175,000 per year A bit about us: Employee-Owned Engineering Firm with over 25 offices across the US. We specialize in MEP Engineering, Energy Efficiency & Building Optimization, Civil/Structural, Architecture, and Planning for new construction, renovation, and adaptive reuse. Our projects include Commercial Buildings, Mission Critical Facilities, Educational Institutions, Healthcare Facilities, Government Buildings, and more. We prioritize Work/Life Balance and maintain a positive company culture. As an Employee-Owned Firm, we believe that putting our employees first helps us provide excellent service to our clients. Why join us? BENEFITS • Competitive Salary & Bonuses!, • Full Benefits Package!, • Employee Ownership & Profit Sharing, • Hybrid Work & Flexible Schedules!, • Meaningful Work!, • Accelerated Career Growth! Job Details Sr Electrical Engineer PE / Team Leader - Hybrid Seeking a Sr Electrical Engineer with 8+ years of engineering consulting experience. Responsibilities include design and project management of commercial projects. Proficiency in AutoCAD/Revit is required, along with strong analytical skills and excellent written and verbal communication abilities. • 8+ years of experience in designing and managing MEP Projects., • BS/MS in Electrical Engineering or Architectural Engineering, • PE License Required, • Proficient in AutoCAD and Revit Software, • Proven experience as an Electrical Engineer designing power and lighting building systems on complex projects., • Develop electrical designs from concept through completion of construction., • Prepare engineering design calculations and layouts., • Prepare detailed engineering reports and narratives., • Coordinate electrical design requirements with architecture, mechanical, and other disciplines., • Experience with Educational, Healthcare, Hospitality, Mixed-Use, Multi-Family, and Civic/Institutional/Municipal Projects., • Ability to mentor junior level staff., • Excellent communication and interpersonal skills., • Demonstrated familiarity with Local Building Codes & Standards., • LEED Accredited Professional and previous experience participating in the LEED or other green rating system process, • Competitive Salary & Bonuses, • Full Benefits Package, • Employee Ownership & Profit Sharing, • Hybrid Work & Flexible Schedules, • Meaningful Work, • Accelerated Career Growth Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job DescriptionSalary: Orion Security Solutions is seeking a qualified Security Systems Designer for a full-time position to be based in Carrollton, TX. Orion Security Solutions (OSS) is an elite integration firm with expertise in advanced technical, physical, and information technology (IT) security solutions. OSS distinguishes itself from competitors by employing the industrys best and offering the highest quality solutions to its customers. The purpose of the Security System Designer is to prepare, design, engineer, draft, and document drawings for Physical Security Systems including, Access Control, CCTV, Intrusion Detection, and Structured Cabling Systems with moderate to higher levels of complexity. In order to ensure design quality, some travel may be required. The Security Systems Designer reports to the Director of Designandcollaborates with lead/peer designers to continuously develop standards, best practices, and operational efficiencies. Duties and Responsibilities • Thorough knowledge and understanding of CAD including but not limited to the following: Menus, Layers and Layer Controls, Blocks, X-references, Backgrounds, Viewports, File Structures, etc., • CAD experience in setting up and maintaining an organized file system of design drawings as well as standards for consistent design practices (such as project templates, standard title blocks, drawing lists, etc.) Preferably experience in AutoCAD., • Obtaining working knowledge of the product lines and related parts used by Orion Security Solutions., • Actively participate in personal and professional development and maintain knowledge of current and new technologies that the company offers., • Ability to travel to sites for site surveys gathering information to complete a design, or to assist the Sales Team in the assembly of a quote., • Attention to detail, a strong work ethic and an ability to perform well in all conditions. Skills and Abilities • Design Physical Security Systems including Surveillance/CCTV, Access Control, Intrusion Detection and Structured Cabling Systems, etc., • Ability to conceptualize technical component interactions in installation environments to ensure a functional design prior to physical installation., • Ability to read and understand technical specifications and project drawings including floor plans, riser diagrams, wiring diagrams, schematics, control panel layouts, heat, power, voltage drop calculations, etc., • Helping the Sales and Technical staff interpret project specifications and drawings for determining most efficient system layout, • Ability to prepare As-Installed drawings based on field drawing markups through coordination with Sales, Project Managers and Technicians. Minimum Qualifications: • Minimum two-year technical degree in electrical/electronic systems or related field or equivalent experience, • Familiarity with local AHJs and permitting requirements, • Strong oral, written communication and analytic skills., • Strong time management skills and the ability to multi-task., • Ability to adjust to shifting priorities, • Must possess a strong sense of urgency, • State of Texas license Desired Qualifications • Three years of experience in electronic systems design and installation, • 1+ years of AutoCAD experience, • Experience with Bluebeam, • Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Visio, Teams)

Job Description PHASOR Engineering Inc. is a dynamic Alberta based company specializing in engineering, design, and testing / commissioning of medium to high voltage electrical facilities. Focused on providing the most cost-effective and efficient solutions to power system engineering, we are involved in a diverse range of projects from preliminary engineering through to the commissioning and startup. We are currently seeking a highly motivated Lead Commissioning Engineer / Commissioning Manager join our field services team on a full-time basis. If you are an excellent communicator and skilled problem-solver with strong attention to detail, we offer a dynamic work environment where you will be continuously challenged in all aspects of the testing and commissioning process. As a condition of employment, successful applicants agrees to undergo a Backcheck screening, which includes identity verification and a criminal background check. Responsibilities: • Leading a team in the testing and commissioning of power system protection & control schemes in the utility, power generation, and oil & gas industry., • Read and interpret drawings and troubleshoot / resolve technical issues., • Manage direct reports and delegate tasks as needed., • Report preparation and submission., • Assist with generation of commissioning startup procedures or work instructions., • Ensure compliance with all safety practices as per corporate, client, and industry standards., • The successful candidate should possess a Bachelor's Degree in Electrical Engineering, Power Systems Electrician Journeyman Ticket, or an Electrical Engineering Technologist Diploma from a recognized institute., • 4+ years experience leading a commissioning team in the electrical utilities industry., • Strong interpersonal and communication skills and an extreme attention to detail are essential., • Knowledge of the Microsoft office software suite of programs coupled with strong computer skills., • Excellent organizational skills and ability to manage a wide variety of issues simultaneously., • Strong analytical, risk assessment and problem solving skills., • Ability to work for extended periods out of town., • Valid driver's license with clean driving record., • Must be legally able to work in Canada, VISA Sponsorship is not available for this position., • Valid driver’s license with clean driving record., • Typical shifts will range from 4/3, 8/6, 10/4, and 14/7., • Working hours are generally from 7am - 5:30pm at 10hrs/day. Other names for these roles include: Commissioning Technologist, Commissioning Engineer, Commissioning Lead, Commissioning Specialist, Commissioning Manager, Field Service Specialist, Field Service Technologist/Technician, Protection and Control Technologist/Technician, Protection and Control Specialist, P&C testing Engineer, Protection and Control Testing Engineer, Relay Technologist/Technician, Power System Technician, Power System Electrician, PSE, Electrical Engineering Technologist Benefits • Dental care, • Disability insurance, • Employee assistance program, • Extended health care, • Life insurance, • On-site gym, • On-site parking, • Paid time off, • RRSP match, • Vision care, • Wellness program

Job DescriptionSenior Veritas Enterprise Vault Engineer Employment Type: Full-Time, Executive-LevelDepartment: Legal CGS is seeking a dedicated Senior Veritas Enterprise Vault Engineer to join a fast-paced and hard-working team to assist with any legal accounts. As a Veritas Enterprise Vault Engineer, you will play a key role in supporting various aspects of the company's portfolio. CGS brings motivated, highly skilled, and creative people together to solve the government’s most dynamic problems with cutting-edge technology. To carry out our mission, we are seeking candidates who are excited to contribute to government innovation, appreciate collaboration, and can anticipate the needs of others. Here at CGS, we offer an environment in which our employees feel supported, and we encourage professional growth through various learning opportunities. Skills and attributes for success:The Enterprise Vault is hosted on physical and virtualized Windows Servers and therefore requires the Contractor to provide a wide range of support tasks including but not limited to: - Contractor shall participate in teleconferences or technical meetings to review, educate, and support program objectives; - Contractor shall perform configurations, maintenance, monitoring, and troubleshooting using current engineering documentation; - Contractor shall record configurations change requests through the established change control board; - Contractor shall process storage requests, migrations and decommission tasks; - Contractor shall monitor failed system components and coordinate logistics, vendor support, and site support as needed; - Contractor shall respond to monitoring alerts and warnings with prompt corrective actions and escalations; - Contractor shall complete all scheduled maintenance in accordance with established policies and procedures; - Contractor shall prevent data loss or storage system outages by exercising a high level of attention to detail during maintenance; - Contractor shall manage technology in remote environments; - Contractor shall review and process tickets related to supported system according to the established service level agreements tracked within the service manager database; - Contractor shall provide initial response, Level 1 and Level 2 escalation for outages; - Contractor shall schedule maintenance actions in a timely manner; - Contractor shall create Power Shell and VBS scripts as needed to automate routine maintenance tasks; - Contractor shall facilitate the migration of system into cloud infrastructure; - Contractor shall perform daily system monitoring, verifying the integrity and availability of all hardware, server resources, and systems; - Contractor shall review system and application logs to verify completion of scheduled jobs such as backups; - Contractor shall apply OS patches and upgrades on a regular basis; upgrade administrative tools and utilities; upgrade end user applications; - Contractor shall configure / add new services as necessary; - Contractor shall research and recommend innovative, and where possible automated approaches for system administration tasks; - Contractor shall prepare and review technical assessments to include required tasks, estimated time frames, and effort for any scope project; - Contractor shall provide before/ or after core hour work as required. Our Commitment:Contact Government Services (CGS) strives to simplify and enhance government bureaucracy through the optimization of human, technical, and financial resources. We combine cutting-edge technology with world-class personnel to deliver customized solutions that fit our client’s specific needs. We are committed to solving the most challenging and dynamic problems. For the past seven years, we’ve been growing our government-contracting portfolio, and along the way, we’ve created valuable partnerships by demonstrating a commitment to honesty, professionalism, and quality work.Here at CGS we value honesty through hard work and self-awareness, professionalism in all we do, and to deliver the best quality to our consumers mending those relations for years to come. We care about our employees. Therefore, we offer a comprehensive benefits package.- Health, Dental, and Vision- Life Insurance- 401k- Flexible Spending Account (Health, Dependent Care, and Commuter)- Paid Time Off and Observance of State/Federal Holidays Contact Government Services, LLC is an Equal Opportunity Employer. Applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Join our team and become part of government innovation!Explore additional job opportunities with CGS on our Job Board: more information about CGS please visit: or contact:Phone: +1 (888) 680-5916Email: #CJ We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionThe Potter’s House of Dallas is actively seeking a highly skilled Television Broadcast Systems Engineer to ensurethe reliability and efficiency of our broadcast and streaming facility. As an integral member of our team, the Television Broadcast Systems Engineer will be responsible for maintaining and optimizing equipment for live productions, post-production processes, and streaming services. This individual will apply their expertise in video, audio, and broadcast technology to support critical infrastructure upgrades, while ensuring all systems function at the highest level of performance for both traditional broadcasting and modern streaming platforms. Key Responsibilities: • Manage and maintain all broadcast technology systems., • Provide prompt response and resolution for issues affecting broadcast and streaming operations., • Develop project plans and recommend capital budget requirements., • Perform preventative maintenance on field, studio and control room equipment while, • assisting with technical setups., • Install and update equipment and systems software., • Repair and troubleshoot equipment to the module level using industry-standard test equipment., • Ability to read and understand system signal flow diagrams and schematics for television control room and campus facilities., • Ability to create and repair custom video, fiber and ethernet cable assemblies., • Develop and maintain clear documentation and best practices for broadcast workflows, ensuring operational efficiency and knowledge sharing., • Embrace new approaches and continuous improvement, challenging established norms to drive innovation and operational excellence in broadcast technology.Basic Qualifications:, • 5+ years of broadcast experience., • Familiar with PC and Apple systems., • Ability to work within a fast-paced, high-change environment while meeting all project deadlines., • Excellent written and verbal communication skills., • Must be timely and organized., • Ability to work well independently and with a team., • A valid driver’s license., • Must have reliable transportation., • Ability to stand and walk for extended period and able to lift 50 lbs., • Technical degree in Digital Electronics, Broadcasting, or a related field, or an equivalent combination of education and work-related experience.Preferred Qualifications:, • Proficiency with broadcast production systems and software, including, intercom systems, video switchers, wireless audio and cameras, media server, and test and measurement equipment., • Evertz Router, • Ross Carbonite Ultra 60, • IHSE KVM, • SMPTE Fiber, • VISLINK Wireless Camera Transmitter, • Network Switches, • SONY HDC3500L, • SONY HKCWL50 Wireless Side Panel, • EditShare, • RTSBenefits:, • Paid time offSchedule:, • Sunday 6am – 2pm | | Tuesday-9am-5pm |Wednesday 1:30pm-9:30pm, • Schedule subject to change based on events.This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor. Such tasks shall be capable of being performed with reasonable accommodation, if necessary, that does not impair a business necessity or impose an undue business hardship and without presenting a direct threat to the safety to the applicant or others. Powered by JazzHR tRo5hF7HXR

Job Description ARE YOU PASSIONATE ABOUT DRIVING COMPLIANCE, ENSURING SYSTEM INTEGRITY, AND ELEVATING QUALITY STANDARDS? Tentamus North America is searching for a skilled Computer Systems Validation Engineer to lead validation efforts, strengthen regulatory compliance, and support the implementation of high-quality, risk-based IT and laboratory systems. This role is ideal for someone with deep knowledge of cGMP, a strong analytical mindset, and the ability to translate complex technical requirements into compliant, reliable solutions. If you excel in dynamic environments, enjoy solving challenges that directly impact product quality and patient safety, and thrive at the intersection of technology and regulatory compliance, we want to hear from you! WHAT YOU'LL DO AS THE CSV ENGINEER The CSV Engineer performs validation services, including but not limited to equipment qualification, method validation, protocol generation and execution, data analysis and reporting; Generating, executing, and reviewing validation protocols and reports for equipment, instruments, utilities, and control systems through: Commissioning, (ERES), VP, FDS, DS, URS, IQ, OQ, PQ, VSR phases. Other duties include: Validation Documentation & Execution • Author, review, approve, and execute validation documentation, including protocols, summary reports, procedures, and other lifecycle documents., • Design, implement, and support validation strategies and protocols for products, raw materials, and development projects., • Provide URS, validation plans, and risk assessments for new systems and equipment introduced to the facility., • Ensure validation studies and related activities comply with cGMP, quality systems, and IT Quality Assurance practices., • Participate in and support internal and external audits and inspections, including identifying compliance gaps and implementing corrective actions., • Assess site regulatory compliance status and ensure implementation of CAPA for ongoing inspection readiness., • Identify, communicate, and manage trends in operational compliance risks, ensuring appropriate CAPA is agreed upon with stakeholders., • Provide compliance input for internal management reviews and external regulatory inspections., • Support and maintain the validation department's equipment inventory., • Generate data and reports for validation system evaluation programs., • Investigate and conduct troubleshooting and root-cause analysis for validation-related incidents and deviations., • Partner with Quality Laboratories, QA, and cross-functional teams on validation study execution and quality initiatives., • Represent equipment qualification and validation programs during client and regulatory audits., • Demonstrate in-depth knowledge of cGMP regulations, quality systems, and IT Quality Assurance practices., • Maintain strong organizational, documentation, analytical, and problem-solving abilities., • Be proficient in using Quality Management software and tools., • Work collaboratively with cross-functional teams to achieve quality and compliance objectives. SCHEDULE & POSITION This is a full-time, Monday – Friday, hybrid position. Occasional evening and weekend work may be required for performance tests or software rollouts, and domestic travel up to 20% may be necessary for project implementation, collaboration, and/or learning and development purposes. This role primarily operates in an office environment, but we offer flexibility for remote work based on organizational needs. Collaboration with multiple departments and teams is essential. Our ideal candidate will be located near one of our laboratories in Portland, Oregon, Dallas / Fort Worth, Texas, or Fredericksburg, Virginia. MENTAL & PHYSICAL REQUIREMENTS This role requires regular use of hands and fingers, the ability to reach, talk, and hear, and extended periods of sitting at a desk working on a computer. Specific vision abilities needed include near and far distance, color perception, peripheral vision, and depth perception. WHAT'S IN IT FOR YOU? This role offers an annual salary between $80,000 – $85,000, a comprehensive and low-cost benefits package including medical, HSA, dental, vision, disability, life insurance, a matching 401(k), paid time off (PTO), and access to an Employee Assistance Program. QUALIFICATIONS The ideal candidate will be authorized to work in the United States indefinitely and without restrictions or sponsorship, hold a Bachelor's Degree in Chemistry, Laboratory Sciences, Computer Science, or a related field preferred; equivalent experience, post-graduate education, or relevant certifications/licensure considered; other qualifications include: • 3–5 years of experience in a laboratory, IT Quality Assurance, or related regulated environment, with the ability to perform all essential duties independently., • Working knowledge of common laboratory equipment and software as well as general pharmaceutical testing processes, raw materials, and quality systems., • GMP experience strongly preferred., • Full working knowledge of 21 CFR Part 11, GAMP 5, ALCOA+ and standard industry expectations for computerized system validation., • Strong understanding of the system validation lifecycle, computer system validation requirements, and data integrity principles., • Ability to apply concepts from science and engineering to define problems, collect and analyze data, and draw valid conclusions., • Proficiency with Quality Management tools and documentation practices., • At least 2 years of professional experience in IT Quality Assurance, including proficiency with IT QA SOPs, Quality Policies, and delivering training to IT and laboratory users., • Strong problem-solving, project management, and organizational capabilities., • Ability to manage multiple priorities while balancing short- and long-term objectives., • Able to work collaboratively in cross-functional and cross-cultural teams, while also making independent decisions when required., • Excellent oral and written communication skills, with the ability to clearly synthesize and present complex concepts. ABOUT TENTAMUS Labs for Life®. We are a global network of full-service accredited analytical laboratories providing crucial quality and safety analysis for clients locally, nationally, and beyond using proven methods of chemistry and microbiology. Many of the products you use and consume daily rely on Tentamus labs. With 20 labs in North America and growing (100 globally), we celebrate having talented diverse scientific and service-oriented professionals. Visit us at Tentamus.com | Follow Tentamus on LinkedIn Job Posted by ApplicantPro