Trabajos technical communication en Jacksonville, Florida - Page 9Crear alertas

Job DescriptionAircraft Mechanic – Join the Team at Flightstar in Jacksonville, FLTake Your Skills to New Heights We’re looking for experienced and motivated Aircraft Mechanics to join our dynamic team at Flightstar, an MRO Holdings company, located in sunny Jacksonville, Florida. In this role, you'll perform advanced-level maintenance—identifying, removing, and installing critical aircraft components and servicing engines and accessories. Your work ensures each aircraft meets the highest standards of safety, airworthiness, and customer satisfaction. You’ll follow precise instructions and industry safety protocols, knowing your expertise keeps our skies safe and our clients confident. Why Make the Move to Florida? * ???? Year-round sunshine * ???? No state income tax – more money in your pocket * ✈️ Thriving aviation industry with long-term career potential * ????️ Access to world-class beaches, outdoor adventures, and entertainment Position RequirementsQualifications * FAA Airframe & Powerplant (A&P) Certification preferred * 5 years of hands-on aircraft maintenance and repair experience strongly preferred * Solid knowledge of airframe/powerplant systems, inspection procedures, and troubleshooting * Able to work independently and thrive in a team environment * Strong communication and critical-thinking skills Key Responsibilities * Perform advanced maintenance and repairs to meet FAA and customer standards * Remove, install, and service aircraft components, engines, and accessories * Read and interpret maintenance manuals and safety documentation * Conduct inspections and identify structural materials (aluminum, composite, etc.) * Replace filters, conduct lubrication, perform leak checks * Research and follow approved repair procedures for discrepancies * Use Flightstar’s ERP system to track parts, verify alternates, and check compatibility * Work safely with hand tools and technical equipment in varying physical positions * Follow all safety protocols and wear appropriate PPE * Train and support apprentices as assigned * Maintain accurate documentation: work orders, task cards, logs, etc. * Apply working knowledge of ATA codes, airframe zones, and aviation standards * Perform engine and accessory servicing, aircraft jacking, and leveling * Take on additional duties as needed to support team success What We Offer * Competitive salary based on experience * Comprehensive benefits package (medical, dental, vision, 401(k), and more) * Relocation assistance * Opportunities for continued education and career advancement * A collaborative, inclusive, and safety-first work environment Additional InformationDecision-Making Scope * Independent Decisions: Perform day-to-day responsibilities in alignment with safety and company procedures * Requires Approval: Time-off requests and other exceptions requiring leadership input Position ProfileRequirementRequiredPreferredHigh School Diploma or GED✅FAA A&P Certification✅Airframe Familiarization (FAM) Certs✅Valid Driver’s License✅Aviation Experience (18+ months or A&P program graduate)✅Proficiency in English (read, write, speak)✅Basic computer skills for ERP system and technical manuals✅Physical capability for ladder use, lifting, kneeling, etc.✅Working Conditions * Safety is a top priority. All team members must work in compliance with safety regulations and Flightstar’s SMS (Safety Management System) culture. * PPE Requirements: Safety glasses (including prescription, if applicable) must be worn as needed. Ready to take your aviation career to the next level in a place where you can grow, thrive, and enjoy life outside of work? Apply now and join a team that’s elevating industry standards—one aircraft at a time. FLSA: Non- Exempt Department: Maintenance Job Title: Aircraft Mechanic Reports To: Assigned Manager or Supervisor DOT/ NON- DOT: Covered Schedule: 1st and 2nd shift available

Job Description Petticoat-Schmitt Civil Contractors, Inc., is a privately owned civil contracting firm that performs work in the public and private market, specializing in clearing, grading, underground water/utility, roadway, and wastewater plant construction throughout the Southeast. We are excited to welcome you to join our team as a Water/Wastewater Project Engineer. At Petticoat-Schmitt, we all work together to do more than just “build things.” Our focus is on building life-changing infrastructure. Our focus on professionalism, communication, safety, and timeliness has made Petticoat-Schmitt one of the most respected civil contractors in the Southeast. If you want to belong to a team that does that well every day, this company is a great fit for you. Our clients include construction services for public works, water resources, and site development. If you have experience working in the heavy civil construction industry as a concrete Water/Wastewater Project Engineer or want to grow that experience, this role will be a great fit. You will love it here if you: • Value Accountability to put Safety first, plan the work, communicate expectations, execute the plan, and take ownership to solve problems., • Care about character, operate with integrity, respect others, honor commitments, always trustworthy, and practice humility – no jerks allowed., • Take control and ownership of the planning, preparation, and execution of projects, • Share your vision, wisdom, and technical expertise to elevate your team in hitting goals, • Display the ability to be an analytical problem-solver that enjoys driving fast results, • Have 1-3 years of experience in civil engineering or construction management (Water/Wastewater Treatment Plants), • Have a bachelor’s degree in Construction Management, Civil Engineering, or a related field, • Understand industrial constructions principles, operations, and logistics, • Strong leadership and management skills, • Proficient computer and software skills: MS Excel, MS Project, and Primavera P6, • Experience using construction-specific software for heavy civil projects, • Able to use manual dexterity, physical stamina, life 80 pounds, and climb ladders or scaffolding, • Phone, Fuel Reimbursement, • Health Insurance – 90% of premiums paid for employees, • Dental, Vision, short/long term life insurance, • $15,000 employer paid life insurance, • 401 (K) with 100% match on 4% of wage contributions, • Access to financial and health advisors, • UNLIMITED PAID TIME OFF – yes, you read that right!, • Paid Holidays, • Company provided training and development programs Our company runs on EOS purely. That means as a member of this team, you will have a leader who: • Gives clear directions, • Makes sure you have the necessary tools, • Acts with the greater good in mind, • Delegates appropriately, • Takes time to truly understand your role and how you can help the company, • Makes their expectations clear, • Communicates well, • Has effective meetings, • Meets one-on-one with you quarterly or more, if needed

Job Description Overview CTG is seeking to fill an IT Systems Engineer opening for our client in Jacksonville, FL. Location: This position will be mostly remote but there could be a few times where they get asked to come on-site to the Jacksonville campus to provide in-person support. Candidates should be within 70 miles of the Jacksonville campus. Duties: * Review and evaluate current Microsoft Intune system settings to improve and simplify mobile device management. * Create, manage, and maintain mobile configurations, application configurations, enrollment profiles, and mobile application assignments within Intune. * Provide system administration and support for mobile devices (iOS and Android), including troubleshooting and configuration. * Utilize PowerShell scripting for automation and system management tasks. * Troubleshoot Microsoft Office applications on both desktop and mobile platforms. * Support Microsoft Conditional Access policies and provide recommendations for optimal configuration. * Monitor and respond to technical hardware and software issues, escalating to vendors or external support as needed. * Participate in the implementation and maintenance of systems software and hardware across multiple locations. * Document systems requirements, configurations, inventories, and technical plans. * Collaborate with cross-functional IT teams to support and maintain multiple ongoing projects. Skills: * Strong knowledge of Microsoft Intune Admin Console (required) * PowerShell scripting (required) * Experience with iOS and Android device administration (required) * Microsoft Office troubleshooting (preferred) * Microsoft Conditional Access configuration (preferred) Experience: * Minimum of 3 years of hands-on technical experience in systems engineering or Intune administration, preferably in a large, complex IT environment. Education: * Bachelor’s degree and training/experience in IT technology; OR Associate degree plus 3 years of demonstrated technical experience; OR High school diploma and 5 years of demonstrated IT technical experience at a large, complex organization. Excellent verbal and written English communication skills and the ability to interact professionally with a diverse group are required. CTG does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services for this role. To Apply: To be considered, please apply directly to this requisition using the link provided. For additional information, please contact Tana Stilloe at . Kindly forward this to any other interested parties. Thank you!

Job DescriptionTeam JAS is looking for a Director of PMA Engineering to lead the design, development, certification, and continuous improvement of aircraft components at Team JAS. This key leadership role requires a strong background in aerospace or mechanical engineering and deep expertise in FAA regulations, especially FAR Part 21 and PMA processes. About Team JAS, Inc: Founded in 1986, Team JAS is a leading aerospace company specializing in the support of the Twin Otter aircraft. We’re proud to serve as the world’s premier solutions provider for aircraft repair, maintenance, overhaul, and FAA-PMA-approved manufacturing. Located in Jacksonville, Florida, our 36,000-square-foot facility houses an extensive inventory, our shipping and receiving department, a certified FAA (YJAR8401) and EASA (EASA.145.6700) repair station, and a Viking Air Factory Endorsed Component Center. Team JAS is a dedicated team committed to excellence, innovation, and integrity. As part of the Exchange Income Corporation, we offer the stability of a larger organization with the collaborative culture of a close-knit team. Here, each member’s contributions make an impact as we work together to advance the future of aviation. About The Position: The Director of PMA Engineering is responsible for leading all engineering functions related to the design, development, certification, and continuous improvement of aircraft components, ensuring regulatory compliance with the FAA and other aviation authorities. As the FAA Part 21 Accountable Manager, this leader oversees all activities under the scope of FAA Production Approval, including the integrity of PMA processes and documentation, while driving quality and operational excellence. The ideal candidate brings extensive experience managing engineering teams and complex projects from concept through certification, combined with exceptional leadership, communication, and project management skills to foster collaboration and innovation across Team JAS. Primary Responsibilities: • Provide strategic leadership by developing, communicating, and executing the engineering department’s vision, mission, and strategic plans in alignment with the company’s goals and objectives., • Ensure all developed and manufactured products comply with FAA and other aviation authority regulations by overseeing the PMA application and certification process, including direct coordination with the FAA and relevant certification bodies., • Ensure robust engineering documentation, configuration management, and change control processes., • Develop and implement engineering policies, procedures, and best practices., • Recruit, develop, and retain top engineering talent, mentor and coach team members., • Manage engineering department budgets, resource allocation, and capital planning., • Identify, evaluate, and manage risks throughout the product development and certification lifecycle, implementing effective mitigation strategies to ensure compliance, safety, and timely delivery., • Lead cross-functional engineering projects from concept through certification, production, and post-delivery support, ensuring alignment with customer requirements, regulatory standards, and business objectives., • Serve as the primary liaison with the FAA and other regulatory bodies during audits, inspections, and certification activities., • Oversee Project Engineers to ensure projects are delivered on time, within scope, and on budget., • Collaborate closely with Quality, MRO, Supply Chain, Sales, and suppliers to support product performance, compliance, and customer satisfaction., • Champion continuous improvement initiatives within the engineering department to enhance efficiency, accuracy, and product quality., • Support business development by providing technical expertise during customer engagements, proposals, and product planning., • Drive digital transformation by integrating modern engineering tools and systems (e.g., CAD, PDM, ERP) to streamline workflows., • Stay informed on industry trends, technological advancements, and evolving regulatory requirements to maintain innovation and compliace.Required Qualifications:, • Bachelor’s degree in Aerospace, Mechanical, or Manufacturing Engineering, • Extensive experience in aircraft parts development, certification, and engineering leadership within the aviation industry., • In-depth knowledge of FAA regulations, including FAR Part 21 and PMA procedures., • Proven experience managing engineering teams and leading cross-functional projects from concept through certification and production., • Exceptional leadership skills with the ability to motivate, mentor, and develop high-performing technical teams., • Strong communication and interpersonal skills, with the ability to effectively collaborate across departments, engage with regulatory authorities, and convey technical information to non-technical stakeholders., • Project management experience with demonstrated budgeting and resource planning capabilities., • Track record of implementing process improvements and driving operational excellence.Preferred Qualifications:, • Experience working in aviation manufacturing, quality assurance, or production environments (quality experience strongly preferred)., • Prior designation or hands-on experience as a Part 21 Accountable Manager or similar regulatory compliance leadership role., • Proficiency with engineering systems and digital tools (e.g. Solidworks, PDM, Quantum Control preferred)., • Familiarity with international aviation regulations (e.g., EASA, CAAC, TCCA) and multi-certification environments. Our Culture: We believe our most valuable resource is our people! At Team JAS, we’re more than just a company; we’re a community where employees feel valued, supported, and inspired to do their best work. We strive to create a dynamic and stimulating environment where employees are motivated to give their best effort while enjoying the benefits of a balanced and fulfilling work experience. Benefits: Team JAS offers an exceptional benefits package designed to support the well-being and success of our employees. From FREE employee health insurance coverage to a generous PTO package, we prioritize providing our employees with wellness, balance, and overall experience. Our comprehensive benefits package includes opportunities for professional growth and development, demonstrating our commitment to fostering a healthy, happy, and engaged workforce. • * FREE * Employee Health Insurance provided by Florida Blue, • 6% Matching 401k Plan, • Generous PTO Plan, • Dental Insurance, • Vision Insurance, • Employee Stock Purchase Plan, • Paid Holidays, • Floating Holidays, • Parental Leave, • Life and Accidental Death Insurance, • Long Term Disability Let’s achieve great things together! Team JAS is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status, or other characteristics protected by law. Powered by JazzHR 6ZNooy3v6N

Job Description WHO ARE WE: BlackHawk Industrial provides you the highest quality industrial products and equipment, offering manufacturing services while creating innovative engineered supply solutions. We truly believe in the importance of the local relationships with the customers we service. Our employees have fun every day exceeding the expectations of our customers, suppliers, and shareholders. We distinguish ourselves as the #1 choice of industrial manufacturers who are in need of Technical Service and Production Savings. We are BIG ENOUGH TO SERVE, and SMALL ENOUGH TO CARE. • Total Targeted Compensation * Salary + Commission = $75,000 to $100,000 SUMMARY: The Account Manager is responsible for managing existing and new customer relationships to meet and/or exceed company sales revenue and profit objectives. ESSENTIAL COMPETENCIES AND RESPONSIBILITIES: • Personally exhibits, recruits and coaches associates consistent with Core Behaviors, • Responsible for promoting culture of safety, • Manage new and existing customer relationships, • Maintains a thorough knowledge of products, • Presents products to customer, • Follows through with customer to ensure satisfaction, • Identifies and prioritizes all existing and prospective customers within his/her territory and keeps mailing list current., • Studies product information, attends seminars, supervises tests of products, • Attends and contributes to company sales meetings and technical sessions., • Provides customers with all literature and promotional materials they need to enhance their productivity., • Provides the General Manager with information from the market regarding trends, new products, market share in existing and potential accounts., • Proactively solve problems for customers, • Build and sustain positive customer relationships, • Provide and coordinate technical support as needed, • Support and expand onsite sales and service, • Communicate customer and market issues to company management, • Perform other duties as assigned, • Perform all work in accordance to ISO processes and procedures QUALIFICATIONS: • High levels of product knowledge, • Excellent written and verbal communication skills, • Excellent interpersonal skills, • Competent with the use of computer software specific to the operation SUPERVISORY RESPONSIBILITIES: • No direct supervisory responsibility. May provide indirect supervisory input. EDUCATION and/or EXPERIENCE: • High School diploma required, • Bachelor’s degree in a related field preferred, • 2-5 years’ experience in a similar position required in Industrial Sales, • Previous sales or customer service experience preferred CERTIFICATES, LICENSES, REGISTRATIONS: • None required WORK ENVIRONMENT: • Employee is regularly required to speak and understand English, stand, walk, sit, use hand to finger, handle or feel objects, tools or controls; reach with hands and arms. Employee is required to use computer and other equipment. PPE REQUIRED: • Eye protection, ear protection, and as required by customer, steel-toed shoes and head protection. BENEFITS: • Health Insurance BCBS of OK HDHP, • HSA with Employer match (must meet criteria), • Dental and Vision Insurance, • 401K Plan and Company Match, • FSA (Full FSA, Limited FSA, and Dependent FSA), • Company paid Long Term and Short-Term Disability, • Company paid basic Life Insurance and AD&D/, • Supplemental life and AD&D/Dependent life, • Ancillary Critical Illness Insurance (Wellness Rider Included), • Ancillary Accident Insurance (Wellness Rider Included), • Ancillary Hospital Indemnity, • Employee Assistance Program (EAP) – Includes concierge services and travel assistance., • Paid Time Off, • Holiday Paid Time Off, • Gym Reimbursement, • Quarterly Wellness challenge with a chance to will money or prizes, • Tuition Reimbursement – after 1 year of employment *BlackHawk Industrial is an Equal Opportunity Employer **This position is considered safety sensitive and is subjective to drug testing, including cannabis ***As part of our BHID policy, we require all potential employees to undergo pre-employment background and drug screening. This is a standard procedure we follow to ensure a safe and productive work environment.

Job Description Watchtower Security, a fast-paced, growing national surveillance provider in the multifamily industry is seeking a qualified individual to generate new leads and close sales in a designated area. Each sale will be managed at all stages by this individual, starting with the initial communication, the property walks, and generating the presentation and delivery of the proposal to the client. This position requires travel, attendance at trade shows, and involvement in Industry associations. Essential Job Functions: • Source, develop leads, prospect, and continuously network, • Ability to use various sales methods (in-person meetings, virtual meetings, and presentations) to achieve yearly targets that will be measured and reviewed quarterly, • Travel within assigned region for meetings, trade shows, and customer and industry association events, • Periodically walks properties both in person and virtually with prospects, • Building and maintaining police and other law enforcement relationships, • Apartment Association events, membership, and participation will require after-hours events, • Interpreting and delegating client concerns and issues to the proper departments and assisting in resolutions, • Consistent and meaningful client and prospect email communication, • Ongoing sales training, technical education, and industry knowledge, • Weekly reporting to peer group, • Monday to Friday availability from 8 a.m. to 6 p.m. for communication is standard and additional time is necessary if required Job Skills and Requirements: • 3–5 years in business-to-business sales experience preferred, • Proven sales record with the ability to close based on trust, information, and honest business practices, • Multifamily Housing Industry experience is preferred, • Bachelor’s degree or related applicable experience preferred, • Proven above-average written and verbal communication, • Analytical skills, • Experience with Microsoft Office and Google suite

Job Description Overview $21.00 - $29.00 / Hourly The primary role of the Dental Assistant is to support the success of the clinicians through effective delivery of the Perfect Patient Experience (PPE), thus creating a Patient for Life (PFL). Dental assistants perform a variety of patient care, office, and laboratory duties. Dental assistants prepare patients for oral examination and assist other dental professionals in providing treatment to the teeth, mouth, and gums. Dental assistants must work effectively with co-workers including Specialty dental assistants, patients, and the front office by sharing ideas in a constructive and positive manner. A successful dental assistant will execute active listening to objectively consider ideas and suggestions from others, keep commitments; keep others informed of work progress, and address problems constructively to identify practical business solutions. Specialty Dental Assistants If dental assistant is assigned within specialty areas including: Endodontics, Oral Surgery, Orthodontics, Periodontics or Pediatric, they will primarily be supporting clinicians within that specialty and may be required to have additional training. Responsibilities * Perform functions in accordance with the applicable state’s Dental Auxiliaries Table of Permitted Duties. * Actively participate in the PPE by striving to keep your patients focused on optimal treatment while attending to their individual needs and concerns. * Escort patients to/from the front desk and introduce them to other team members as appropriate. * Communicate with the front and back office teams to ensure the Orthodontists schedule runs smoothly and efficiently. * Maintain a clean, sterile, and cheerful environment. * Sterilize and disinfect instruments and equipment; clean each operatory in accordance with the state applicable infection control guidelines. * Prepare patients for treatment and assist the dentist- thereby enabling them to provide efficient, quality dental treatment. * At the direction of the clinician, complete radiographs and intra-oral pictures of patients in an efficient and timely manner. * Prepare tray setups for dental procedures and maintain adequate supply levels in each operatory, replenishing as needed to provide efficient patient care. * Keep the patients' mouths dry and clear by using suction or other devices. * Instruct patients on postoperative and general oral health care as directed by the clinician. * Record patient charting and all the clinician’s notes in the digital patient chart as directed by the clinician. * Support patient care by presenting treatment record, consents and health history to clinician prior to patient treatment. * Ensure equipment is maintained according to manufacturer’s guidelines. * Work closely with Lead Dental Assistant to ensure adequate clinical supplies are on hand. * Utilize technology by learning how to operate and give explanation/demonstration of how to operate to others. * Participate in daily morning huddles, monthly team meetings and any other meetings as required. * Models company culture, values, standards and best operational practices based on the “We Believes.” * Demonstrates stewardship of the PDS Brand making decisions consistent with the PDS Brand framework. * Implements the Perfect Patient Experience process in efforts to gain Patients for Life. * Maintains an appropriate professional appearance and demeanor in accordance with company policies; addresses others professionally and respectfully. * Ensures Compliance with Company policies, as well as State, Federal and other regulatory bodies. * Other duties and responsibilities as assigned. Qualifications * Equivalent to high school diploma or general education degree (GED), and specified training courses as mandated by state for certification, licensure, or registration. * Certificates/Licenses/Registrations: As mandated by applicable state. * Specialty Dental Assistants must possess and maintain a valid driver’s license and automobile insurance. Driver’s license must be verified by completing a background check and motor vehicle record check at the time of hire. * Specialty Dental Assistants are required to timely travel to multiple offices per day, in some cases several times per day, and must have reliable means of transportation to travel to assigned offices. * In lieu of a valid driver’s license and automobile insurance, Specialty Dental Assistant must have reliable means of alternate transportation which would allow for required, timely travel to multiple offices per day, in some cases several times per day. * Travel may be planned or unplanned and is subject to change without notice. Preferred * One-year certificate from an accredited college or technical school; or equivalent combination of education and experience. Knowledge/Skills/Abilities * Ability to respond to common inquiries from patients, staff, vendors, or other members of the business community. * Ability to draw valid conclusions, apply sound judgment in making decisions, and to make decisions under pressure. * Ability to interact with other Clinicians and Owner Doctors effectively * Ability to interpret and apply policies and procedures. * Ability to read, analyze, and interpret documents such as business periodicals, professional journals, technical procedure manuals, safety rules, operating and maintenance instructions, and governmental regulations. * Ability to communicate effectively and present information, both verbally and in writing, to patients and co-workers. * Ability to interpret a variety of instructions furnished in written, verbal, or diagram form. * Ability to maneuver through basic computer software. * Results Oriented (Energetic self-starter; sets realistic goals; meets commitments; persistent, prioritizes daily to achieve results). * Customer Service Advocate (flexible and adaptive; empathetic; passionate; ethical). * Influencer (active listener/observer of behavior; creates a win/win need for change) * Self-motivated, reliable individual capable of working independently as well as part of a team. * Ability to multi-task effectively without compromising the quality of the work. * Excellent interpersonal, oral and written communication skills. * Ability to handle and maintain extreme confidentially Patient records. * Organized, detail-oriented individual able to work in a fast-paced environment. Benefits • Medical, dental, and vision insurance, • Paid time off, • Tuition Reimbursement, • 401K, • Paid time to volunteer in your local community Responsibilities PDS Health is an Equal Opportunity Employer. We celebrate diversity and are united in our mission to create healthier and happier team members.

Job Description Novatae Risk Group is a national wholesale/brokerage for hard to place commercial insurance coverages. We are seeking experienced commercial Excess &Surplus Brokers for your area location. We are searching for candidate(s) who have demonstrated success in the wholesale industry or MGA. We are expanding our capabilities for revenue generation and have a very generous compensation package to offer including almost 500 carriers to foster your future successes.. Requirements: • Oversee the preparation of submissions to include applications and various support documents., • Favorable presentation of the account to the insurance carriers, and to proactively work in obtaining a compelling program., • Market new and renewal business in conjunction with designated sales teams., • Collect all necessary information and analyze the current program., • Order applicable underwriting reports as needed., • Following submissions through the process, ensure quotes are provided in a timely manner., • Solicit new business through various sales and marketing techniques and begin establishing relationships., • Coordinate and handle administrative workflows in conjunction with support team(s) to establish accurate and prompt response to service issues., • Skilled in business writing and situation analysis., • Energetic, self-motivated individuals who are goal oriented and can thrive in a team environment and autonomously., • Strong knowledge and experience of property and casualty insurance including coverages, rating, terminology and technical procedures. P&C license / E&S licenses., • Must be sales driven, “people person” who likes to establish new relationships while learning communication strategies and sales methods. At Novatae Risk Group, we celebrate and support our differences. We know employing a team rich in diverse thoughts, experiences, and opinions allows our employees, our products, and our community to flourish. Novatae is honored to be an equal opportunity workplace. We are dedicated to equal employment opportunities regardless of race, color, ancestry, religion, sex, national orientation, age, citizenship, marital status, disability, gender identity, sexual orientation, or Veteran status. In addition, Novatae makes reasonable accommodations to known physical or mental limitations of an otherwise qualified applicant or employee with a disability, unless the accommodation would impose an undue hardship on the operation of our business. Powered by JazzHR rSWP4Eh8aC

Job Description What You will Do: • Evaluate and ensure supplier produced Aero-Engine parts are delivered by commitment dates as well as identify delivery issues and manage sustainable corrective improvement actions. This remote position requires aspects of Supply Chain Management, Procurement, Manufacturing, and Quality Assurance disciplines along with the ability to travel., • Make detailed observations, gather part and process data, interpret/analyze that data, ensure closure of engineering questions and part non-conformances., • Monitor MRP tools, Production schedules, WIP (shop floor), and Non-conformances against delivery commit dates. Estimate / revise delivery dates., • Identify bottlenecks, conduct gap analysis, create mitigation plans, generate and track action items to closure., • Work requires the natural ability to easily develop positive, customer-facing, working relationships with engineers, buyers, and program management at both the OEM and supply base levels., • Conduct part transition planning, execution, and verification work Supply Chain Management aspects: • History of customer facing interaction, • Familiarity with MRP, Production Scheduling, Delivery estimation, Risk analysis, Crisis mitigation, and sub-tier supplier involvement, • Experience with warehousing, shipping and distribution, • Knowledge of purchasing and quoting processes, • Evaluating production capacity in a manufacturing environment, • History (breadth and depth) with manufacturing processes, • Ability tread/interpret drawings including understanding of GD&T and critical characteristics (KPCs), • Involvement with Process Planning and Production Readiness reviews, • Familiarity with Control Plans and Operating/Work Instructions, • Exposure to Lean methodologies and tools, • Experience with quality systems and industry standards compliance (including process and material certs), • Knowledge of part qualification requirements (including PPAP/FAI processes), • Understanding proper Measurement/Inspection tool use and requirements, • History identifying and resolving part quality and delivery issues - including utilization of formal problem solving tools and NCM requirements, • Experience working within AS9100, ISO9001 environments, • Creating work instructions, • Self-motivated, disciplined, and organized, • Passion for developing technical and business solutions, • Ability to persuade and influence without authority, • Superior Customer/Supplier interaction Compensation decisions are made based on factors including experience, skills, education, and other job-related factors, in accordance with our internal pay structure. We also offer a comprehensive benefits package, including health insurance, paid time off, and retirement plan. Work Requirements: We offer flexible work options, including hybrid arrangements, to support the need of the role and align with company policies. This position is located in Jacksonville, Florida and is considered hybrid with 3 days required on-site. • You must be able to commute to and from the location with your own transportation arrangements to meet the required working hours., • Shop floor environment, which may include but not limited to extensive walking, and ability to lift up to 40lbs., • Work will be performed at supplier sites or remote locations., • Substantial amounts of telephone and computer work., • Heavily Regulated Industries with strict adherence to procedures., • Flexibility to meet business deadlines by staying late or arriving early., • Valid driver's license and personal vehicle are required Citizenship requirement: Due to the nature of the work, U.S. citizenship is required. Benefits: • 401(k), • 401(k) matching, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, Short/Long Term Disability, • Paid time off, • Referral programCompany DescriptionWe are Quest Global. We’re in the business of engineering, but what we’re really building is a brighter future. It’s not just what we do, but why we do it that makes us different. We believe engineering has the unique opportunity to solve the problems of today that stand in the way of tomorrow. For 28 years, we have strived to be the most trusted partner for the world’s hardest engineering problems. As a global organization headquartered in Singapore, we live and work in 17 countries, with 56 global delivery centers, driven by 18,000+ extraordinary employees who make the impossible possible every day. Quest Global brings deep industry knowledge and digital expertise to deliver E2E global product engineering services. We bring together technologies and industries alongside the contributions of diverse individuals and their areas of expertise to solve problems better, faster. This multi-dimensional approach enables us to solve the most important and large-scale challenges across the Aerospace & Defense, AutoWe are Quest Global. We’re in the business of engineering, but what we’re really building is a brighter future. It’s not just what we do, but why we do it that makes us different. We believe engineering has the unique opportunity to solve the problems of today that stand in the way of tomorrow. For 28 years, we have strived to be the most trusted partner for the world’s hardest engineering problems. As a global organization headquartered in Singapore, we live and work in 17 countries, with 56 global delivery centers, driven by 18,000+ extraordinary employees who make the impossible possible every day. \r\n\r\nQuest Global brings deep industry knowledge and digital expertise to deliver E2E global product engineering services. We bring together technologies and industries alongside the contributions of diverse individuals and their areas of expertise to solve problems better, faster. This multi-dimensional approach enables us to solve the most important and large-scale challenges across the Aerospace & Defense, Auto

Job Location: Jacksonville, FL Our team is currently looking for experienced Shop Diesel and Road Mechanics. You will play a crucial role in inspecting, diagnosing, repairing, and maintaining diesel engines, vehicles, and equipment. Your responsibilities will include troubleshooting mechanical issues, performing routine maintenance tasks, and ensuring that diesel-powered machinery operates efficiently and safely. This role requires technical expertise in diesel engine systems, strong problem-solving skills, and a commitment to adhering to safety regulations and industry standards. Effective communication and teamwork are essential as you collaborate with colleagues and communicate findings to supervisors and clients. Additionally, staying updated on advancements in diesel technology and participating in ongoing training programs will be integral to your success in this dynamic and challenging field. Responsibilities: • Perform minor and major repairs on trucks, trailers, and cranes., • Collaborate with corporate shop manager to diagnose problems with vehicles, cranes, and plan repairs., • Maintain accurate records of repairs performed., • 2+ years' experience as a Diesel Mechanic., • Must possess a valid CDL license., • Ability to lift up to 50 pounds., • Excellent reading and writing skills., • Ability to pass a fit for duty, background screen, and drug test., • Excellent Pay, • Health Insurance, • Dental Insurance, • Life/Short Term Disability/Long Term Disability Insurance, • 401K matching, • Holiday

Date Posted: 2025-09-05 Country: United States of America Location: HFL04: ASG Jacksonville-Blount Island 6061 BF Goodrich Blvd , Jacksonville, FL, 32226 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret Our Engineered Polymer Products division, located in Jacksonville, Florida, is a leading manufacturer of advanced, high-performance composite and elastomeric structures for U.S. Navy surface ships and submarines. Whether in the air or underwater, we're pushing the limits of innovation. Collins Aerospace will always be a place where people can come together and make a difference. Want to join us on this important journey. Collins Aerospace is looking for a motivated Quality Engineer - Metrology to join our dynamic team. You will need to be a curious and relentless problem solver bringing your skills and abilities to bear on issues and opportunities arising on our legacy programs. \n • The position is working Onsite at our Blount Island Jacksonville FL facility\n, • Relocation Assistance will be provided.\n\n What You Will Do \n • Perform three-dimensional inspection utilizing Spatial Analyzer software in addition to various traditional metrology tools for in-process inspections and alignments of large complex naval parts.\n, • Write measurement scripts within Spatial analyzer.\n, • Evaluate and prepare metrology reports for customer deliverables.\n, • Independently work and communicate with operations, engineering, management, and other disciplines to ensure timely delivery of measurement results.\n, • Interface with all levels of management and coworkers to resolve technical/quality issues related to internal and external product and process quality performance.\n, • Be the voice of the customer in a manufacturing setting.\n, • Write and help support standard work.\n, • Work alongside existing Quality Engineers to develop an understanding of program requirements and Engineering methodology for future program support.\n, • Perform root cause analysis for non-conformities and improvement process\n, • Support audits in compliance with AS9100 and ISO9001\n, • Investigate the root cause of customer escapes and non-conformances and determine appropriate corrective/preventive actions.\n, • Complete and maintain customer documentation.\n\n Qualifications You Must Have \n • Typically requires Bachelor's degree in Science, Technology, Engineering or Mathematics (STEM)) and a minimum of 2 years of Quality Assurance or/and Quality Control experience OR\n, • Advanced Degree in a related field and minimum 1 year of experience\n, • Experience with GD&T\n, • Able to be flexible around shifts, for training and to maintain workflow, to include overtime.\n, • Experience with ERP Systems\n, • U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract\n\n Qualifications We Prefer \n • Ability to obtain, organize and analyze quality data.\n, • Manage multiple competing priorities simultaneously.\n, • Excellent communication skills, both verbal and written, internal and external.\n, • Basic computer and scripting skills\n, • Experience in SAP\n, • Experience in an AS9100 certified environment or similar operating system certifications (IATF16949, ISO-9001-2015, etc.)\n\n What We Offer \n • Medical, dental, and vision insurance\n, • Three weeks of vacation for newly hired employees\n, • Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option\n, • Tuition reimbursement program\n, • Student Loan Repayment Program\n, • Life insurance and disability coverage\n, • Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection\n, • Birth, adoption, parental leave benefits\n, • Ovia Health, fertility, and family planning\n, • Adoption Assistance\n, • Autism Benefit\n, • Employee Assistance Plan, including up to 10 free counseling sessions\n, • Healthy You Incentives, wellness rewards program\n, • Doctor on Demand, virtual doctor visits\n, • Bright Horizons, child and elder care services\n, • Teladoc Medical Experts, second opinion program\n, • And more!\n\n Learn More & Apply Now Collins Aerospace, a Raytheon Technologies company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market. Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable, and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! WE ARE REDEFINING AEROSPACE. Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the infrastructure and buildings that improve the world! Whitman, Requardt & Associates is seeking an expereinced Highway Engineer to join our Jacksonville, FL office. Core responsibilities include roadway design and plans production for highway projects, including but not limited to horizontal and vertical alignments, roadside evaluation and design, maintenance of traffic design, utility coordination, specifications, cost estimates, and development of technical reports. Our highway contracts range from small-scale intersection improvements to complex interchanges and new corridor designs to statewide and districtwide continuing services contracts. We also provide a full range of design-build and owner’s representative services. Requirements: • Bachelor of Science Degree in Civil Engineering from an ABET accredited program., • Licensed as a Registered Professional Engineer (PE) in the state of Florida or ability to obtain license within 6 months of employment., • 5 - 10 years of relevant experience., • Strong knowledge of FDOT standards, specifications, policies, and procedures., • Experience designing roadway projects and preparing contract documents in accordance with FDOT policies and procedures; experience with other state and local agencies in the Southeast and Mid-Atlantic a plus., • 3D design experience a plus., • Experience with Alternative Delivery projects (Design-Build, P3, etc.) a plus., • Ability to travel to project sites, company offices and client meetings., • Experience with design software tools such as MicroStation, Geopak, OpenRoads, InRoads, and AutoCAD preferred., • Proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint)., • Effective oral and written communication skills at all organizational levels., • Ability to work independently and as part of a team., • Capability to handle multiple assignments., • Willingness to continue to learn and grow technically and professionally within the company. WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer: • Flexible work schedule options, • Competitive salary, • Leave accrual and paid holidays, • Healthcare benefits, • Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance, • Flexible spending accounts for medical and dependent care reimbursement, • 401(k) Retirement Plan, • Tuition Reimbursement, • Employee Assistance Program Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) * Not accepting resumes from 3rd party recruiters for this position * Position # 2386 #LI - Onsite #LI - Mid Level

Job Description IEM is the largest independent full-line manufacturer of electrical distribution and control systems in North America. The Company has developed one of the most sophisticated electrical product manufacturing systems in the world and has cultivated partnerships with leading component suppliers resulting in optimal solutions to customer problems. IEM has offices in California, Florida, Canada and Belgium. PURPOSE OF POSITION: As the Electrical Design Project Leader, you will assist in managing project timelines, tracking key milestones, and coordinating with cross-functional teams to ensure seamless execution of engineering and manufacturing initiatives. This role involves maintaining visibility on project progress, identifying risks, and facilitating process improvements to enhance efficiency. You will work closely with engineers, designers, and operations personnel to document project requirements, track changes, and support continuous improvement efforts. This position is ideal for a detail-oriented, proactive individual who thrives in a fast-paced environment and is eager to develop their career in program/project management within the industrial and automation sectors, while striving to manage multi-phased projects with large scope and cross-functional in native. SUPERVISORY RESPONSIBILITIES: This position does not have direct supervisory responsibilities ESSENTIAL FUNCTIONS: · Support creation of project plans; ensure clear documentation of project requirements, changes, and stakeholder communications. · Utilize various internal software platforms and data-driven applications to pull reports, establish metrics, track progress, and suggest process improvements. · Collaborate with Engineering Administrators and Management to identify and resolve common engineering process challenges. · Organize and analyze engineering data to support decision-making, prioritization, and process improvements. · Maintain program dashboards and reporting tools to provide visibility on project progress, process adherence, and change adoption. · Track job assignments, project changes, special projects, and action items across teams. · Support On-Time Delivery (OTD) and Quality initiatives through effective project coordination. · Work outside the electrical design department as required to support order processing and other business needs. · Collaborate with engineering, quality, manufacturing, and operations teams to identify risks and mitigate delays. · Assist in the deployment and support of engineering efficiency tools and workflows. · Help author and track feedback/ drive review of documentation to drive to release · Coordinate with Learning Management and Quality to formally release new/updated documentation, and assign required training and acknowledgements · Train team members on technical writing best practices to enhance the quality of technical process mapping and documentation. · Perform other duties as assigned by Management. COMPETENCIES: · Strong organizational skills with the ability to manage multiple projects and deadlines. · Strong time management practices. · Strong drive to hold others accountable to commitments and drive closure of tasks minimizing technical debt. · Excellent written and verbal communication skills. · Proficiency in project management tools (e.g., MS Project, Jira, Monday.com, Smartsheet, or similar). · Ability to analyze project data and create reports to support decision-making. · Strong Technical Writing skills. · Attention to detail, particularly in technical documentation and data accuracy. · Ability to collaborate effectively across individual contributor, administration, and management teams. · Problem-solving mindset with a proactive approach to improving processes. · Proficiency in document management systems, scheduling tools, and related software. · Adaptability to learn and work with various internal systems and applications. EDUCATION AND EXPERIENCE: · Associate’s degree in business administration, Project Management, or a related field is a plus. · 2–5 years of experience in coordination, project scheduling, or a similar role. · Experience with documentation, process mapping, change management, and project tasks scheduling processes is a plus. · Familiarity with engineering and manufacturing environments is a plus. · Proficiency in Microsoft Office Suite, document control systems, and project tracking tools. · Experience working with ERP, PLM, or other business support systems is beneficial. · Experience driving process and engineering systems improvement is a plus.

Job Description IEM is the largest independent full-line manufacturer of custom electrical distribution and power quality equipment in North America. Formed in 1957, IEM has delivered customer-specific solutions to meet the ever-changing power requirements of growth industries in North America for over half a century. At IEM, we’re not just growing – we're thriving! Our rapid expansion means new opportunities are always on the horizon. If you’re someone who gets excited by making an impact through interesting challenges, you’ll feel right at home. Purpose of the Position: IEM is currently seeking a Process Engineer, specializing in Metal Fabrication, for our Jacksonville, FL and will report into the Lead Process Engineer. The Process Engineering - Metal Fabrication team serves to support the Metal Fabrication department’s pursuit to exceed IEM’s commitment to Quality, On-Time-Delivery, & Customer Support. The Process Engineer – Metal Fabrication team member will employ their resourcefulness and self-starter attitude to resolve manufacturing challenges in real-time, implement cutting-edge improvements, and achieve world-class performance in quality, safety, and throughput. As the design-execution focused member of the team, their ability to fluently translate engineering requirements and IEM’s manufacturing capabilities is critical to achieve alignment at every stage of manufacturing. This position demands deep expertise in problem solving, communication, and technical knowledge to drive effective change in-line with IEM’s growth trajectory. Key Responsibilities: • Provide daily support to Metal Fabrication to identify, contain, and resolve situations that negatively impact IEM’s on-time delivery commitments., • Serve as the liaison between Metal Fabrication and Engineering to resolve questions that arise in the Fabrication process., • Design and oversee development of tooling, fixtures, and jigs to improve manufacturing processes., • Develop work instructions, standard operating procedures (SOPs), and training materials to support consistent operations and operator readiness., • Assess component manufacturability from Engineering documents and provide recommendations for optimal fabrication methods., • Regularly collaborate with Value Stream leaders to review KPIs, identify fabrication related issues, and implement efficient solutions., • Promote consistency of execution across all IEM manufacturing locations., • Support automation initiatives and integration of Industry 4.0 technologies to drive smart manufacturing and operational efficiency., • Lead and participate in kaizen events, root cause analysis (RCA), and corrective/preventive action (CAPA) processes., • Participate in capital equipment selection, installation, and validation., • Develop and promote a culture of positive change. Qualifications: • Bachelor’s degree in Mechanical, Industrial, Manufacturing Engineering or related field (Master’s or technical certifications a plus), • 3+ years of experience in a manufacturing, design, or process engineering role, focused on sheet metal fabrication processes, equipment and tooling, working in a sheet metal manufacturing environment, • Press brakes, fiber lasers, and punching equipment a plus!, • Proficient in SolidWorks design, CSWP preferred, • 2+ years of leadership experience as direct supervisor or project manager, • Strong communication, interpersonal, and project management skills, • Demonstrated career ambition with a track record of growth and increasing responsibility; highly promotable with the potential to take on broader leadership roles within a fast-paced, high-growth organization Workplace Conditions: Approximately 50% of time will be spent on the production floor and 50% at a desk.

Job DescriptionDescription: Are you a skilled service plumber seeking a rewarding career? Look no further than Delta Mechanical Inc. We're more than just a plumbing company; we're a family built on a foundation of integrity, excellence, and unwavering dedication to our craft. For over 30 years, Delta Mechanical has been a leader in providing plumbing services to residents across the United States and we are currently serving the Florida, Colorado, California, Arizona, Texas, and Nevada markets. We are rapidly growing and are looking for those like us who are passionate about serving our customers. Our residential plumber position does not involve any sewer work and comes with company-paid health insurance. Self-motivated individuals who are reliable, have exceptional customer service, and those who function with integrity are encouraged to apply. Job Summary As a plumber at Delta Mechanical, you will be performing installation of water heaters, as well as plumbing fixtures including, but not limited to, new toilets and faucets in occupied or unoccupied residential, multi-family, commercial, and other dwellings. Qualifications: • Minimum of 3 years’ experience in the plumbing trade, • High School diploma or equivalent required., • In some States this position requires a current plumber license of Tradesman, Journeyman, or Masters., • Valid Driver’s License and the ability to adhere to safe driving practices., • Sign on Bonus $1500, • Medical, dental and vision insurance, • PTO, • 401k Essential Job Functions • Installation and service of water heaters including gas and electric tank water heaters, tankless water heaters, hybrid water heaters, direct and power vent water heaters, and recirculating pumps while upholding Federal, State, and Local codes. Must be able to troubleshoot any issues with the above., • Installation and service of faucets, garbage disposals, toilets, along with water filtration, reverse osmosis, and water softening systems. Must be able to troubleshoot any issues with the above., • Ensure the required documentation for each job is completed and uploaded into our system in a timely fashion., • Ensures all personal property of clients is protected from work areas., • Works in a variety of conditions and hours depending on client/jobsite needs., • Enter time/mileage/materials into all relevant software., • Maintain the proper truck stock for the scope of work required., • Maintain a safe and acceptable driving record in accordance with company policy., • Be responsible for overall customer satisfaction with regards to communication, workmanship, and quality. Great Benefits: We provide our plumbing technicians with a company van, phone and a gas card! Commitment to Excellence: Our plumbers deliver exceptional plumbing services ranging from routine maintenance to complex installations and emergency repairs. We're committed to excellence in every aspect of our work. Culture of Innovation: We stay ahead of the curve by embracing the latest technological advancements in the plumbing industry. Skills & Abilities This position requires the capability to understand and follow both oral and written directions. Must be able to communicate effectively with others, analyze and resolve problems, maintain effective working relationships, and interact successfully with internal and external customers. Specific skills and abilities include, but are not limited to the following: • Ability to operate a mobile device/tablet., • Excellent customer service skills., • Proficient in time management; the ability to organize and manage multiple priorities., • Ability to take initiative and effectively adapt to changes., • Recognizes an emergency situation and takes appropriate action., • Able to use sound judgment; work independently, with minimal supervision., • Strong analytical and problem-solving skills., • Performs well with frequent interruptions and/or distractions., • Climbing: Ascending or descending ladders, stairs, ramps, poles, and the like, using feet and legs and/or hands and arms. Specifically, when the amount of climbing exceeds that needed for ordinary motion., • Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position-to-position. Specifically, if it occurs to a considerable degree and requires substantial use of upper extremities and back muscles. Disclaimer This job description indicates, in general terms, the type and level of work performed as well as the typical responsibilities of team members in this classification. The duties described are not to be interpreted as being all-inclusive to any specific team member. Nothing in the job description changes the at will employment relationship existing between the Company and team members. The Essential Job Functions, Physical Requirements, and Work Environment characteristics described are representative of those that must be met to successfully perform the essential functions of this job. Management reserves the right to add, modify, change, or rescind the work assignments of different positions and to make reasonable accommodations so that qualified team members can perform the essential functions of the job. Delta Mechanical Inc. is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, martial status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Delta Mechanical Inc. also prohibits harassment of applicants or employees based on any of these protected categories. Requirements:

Job Description Summary The Pile Dynamic Project Engineer will focus to conduct analyses, assessments, and testing related to the behavior of piles in various soil conditions. The candidate should be proficient in utilizing advanced software and testing equipment to evaluate pile performance and provide recommendations for design optimization and construction processes. The ideal candidate is a reliable, trustworthy individual who thrives in a fast-paced environment where collaboration and autonomy are valued. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Physical Demands & Work Environment · Required to drive, stand, walk, use hands to type, handle, or feel; reach with hands and arms; climb or balance; talk and hear. Body motions and movements include bending, twisting, reaching, stooping, pulling, kneeling, lifting, carrying, and pushing, with or without reasonable accommodation · Lifting and/or moving up to thirty-five pounds regularly is expected, on occasion, with or without reasonable accommodation · Job site conditions may or may not be accessible by vehicle, including wetlands, swamps, grasslands, and fields with uneven surfaces, sand, brush, and other natural and man-made obstacles · This job is primarily and regularly exposed to outside weather conditions and construction sites where the noise level is usually moderate to loud · This is not a remote position. This role will be based on the selected job posting location. Essential Duties and Responsibilities: • Conduct comprehensive analyses of pile behavior, including dynamic testing, wave equation, analysis, and signal matching techniques., • Perform field testing and monitoring of piles using various instrumentation, such as pile driving analyzers, strain gauges, accelerometers, and pile integrity testers., • Interpret test results and data to assess pile integrity, load bearing capacity, and dynamic response characteristics., • Collaborate with design teams to optimize pile design and construction methods based on field observations and analytical findings., • Develop detailed reports and presentations summarizing findings, recommendations, and conclusions for internal and external stakeholders., • Stay current with industry standards, codes, and best practices related to pile dynamics and foundation engineering., • Provide technical guidance and support to project teams during construction phases, including troubleshooting and problem-solving related to pile performance issues., • Participate in research and development initiatives to enhance methodologies, tools and technologies for assessing pile dynamics., • Recruit, train and supervise a team, including project managers, engineers, technicians and other support staff., • Other duties may be assigned Required Qualifications: • Bachelor's degree in Civil Engineering or related field, Master's degree., • Minimum of 7-10 years of experience in pile dynamics analysis and testing within the civil engineering or construction industry., • Proficiency in utilizing specialized software of pile dynamics analysis., • Strong understanding of soil mechanics, structural dynamics, and geotechnical engineering principles., • Experience with various pile types, including driven piles, drilled shafts, micro piles, and helical piles., • Demonstrated ability to conduct field testing and instrumentation installation on construction sites., • Excellent analytical skills with the ability to interpret complex data and draw meaningful conclusions., • Effective communication skills, including the ability to convey technical information clearly to diverse audiences., • Valid Florida Driver's License with an acceptable driving record (in accordance with our Driver's License and Motor Vehicle Record Check Criteria), • Ability to pass a background check screening in accordance with Florida's Jessica Lunsford Act (or equivalent state classification).

Job Description About The Energy Authority The Energy Authority is a public power-owned, nonprofit corporation with offices in Jacksonville, Florida, and Bellevue (Seattle), Washington. TEA provides public power utilities with access to advanced resources and technology systems so they can respond competitively in the changing energy markets. Through partnership with TEA, utilities benefit from an experienced organization that is singularly focused on deriving the maximum value of their assets from the market. Join Our Team as a Systems Analyst! Are you ready to make an impact at the intersection of technology and energy? As a Systems Analyst, you’ll play a key role in ensuring the stability, integrity, and performance of our information systems. From RTO Operations to SharePoint Services and ETRM Support, you’ll support critical business functions that drive our mission forward. In this role, you’ll collaborate with decision-makers, system owners, and IT professionals to develop innovative solutions, resolve system challenges, and maximize the value of our IT investments. What You’ll Do • Collaborate with stakeholders to define system goals, test scenarios, and resolve issues., • Plan, design, and deploy new systems or enhance existing infrastructure., • Research software and hardware solutions to support purchasing decisions., • Develop system design models, flowcharts, and documentation for troubleshooting., • Manage system updates, security audits, and disaster recovery strategies., • Innovation & Impact: You’ll work on meaningful projects that directly support our organization’s mission., • Collaboration & Growth: Join a supportive team of forward-thinking professionals who value teamwork and innovation., • Education & Experience: Bachelor’s degree (B.A./B.S.) in a technical field or equivalent experience. 4-5 years of experience with IT systems, energy trading, or related fields. Familiarity with tools like Commodity XL, Allegro, Office 365, PowerOptix, and SharePoint is a big plus., • Skills & Competencies: Accuracy and attention to detail. Strong problem-solving and critical thinking abilities. Excellent communication and project management skills., • Competitive salary based on experience and qualifications., • Robust benefits package, including medical, dental, vision, and retirement plans., • Paid time off starting at 17 days per year, plus nine paid holidays. TEA Values TEA employees share a common sense of purpose. When TEA accomplishes its mission, the result is improved quality of life for the citizens and businesses of the communities our clients serve. TEA employees exceed the expectations of those they serve, deliver services with the highest standards of fair, honest, and ethical behavior, set the standard for service and expertise in our industry, embody a spirit of collaboration, and embrace TEA’s founding entrepreneurial spirit by seizing opportunities to deliver value. If you are self-motivated, driven to deliver excellence, and passionate about your career, TEA is the perfect place for you. It’s YOUR Future. It’s OUR Future.

Job Description Structural Engineering Manager Position Type: Full-time, Exempt, Salary Reports to: Engineering Operations Manager Supervisory Responsibility: Structural Designers Location: Jacksonville, FL Company Summary Stellar Energy provides custom power augmentation and energy plant solutions for power generation and utilities, liquefied natural gas (LNG), data center, biopharma, and other markets. Stellar Energy’s innovative solutions include turbine inlet air chilling, inlet air conditioning (heating and cooling), evaporative cooling, direct contact air chilling, thermal energy storage, district cooling and central utility plants. The company’s experience spans more than 20 years and stretches across the globe, with offices in the United States, Asia and the Middle East and North Africa (MENA) region. Job Summary The Structural Engineering Manager is responsible for the design of modular TIAC (Turbine Inlet Air Cooling) Plants, CHP, Mission Critical and District Cooling Plants up to full production. This includes review and compliance with structural codes, performing structural analysis and pricing support; coordinating with structural designers to generate fabrication drawings, preparing detailed plans and specifications, and support module production (including site/shop inspections) reviews. The manager will also be responsible for technical support for all products currently in production and will provide support during the project proposal process. Essential Functions: • Undertake engineering and design work independently., • Manage and lead the structural design group., • Accomplishes tasks in accordance with company procedures, specifications, standards, and any project specific requirements., • Ensures that each design meets the seismic and wind load requirements of the site., • Produces structural calculations., • Takes full responsibility of structural design including specification compliance, coordinating with structural designers, and liaising with external structural consultants., • Participates in project teams and all activities related to the development of the modular plant., • Provides technical support to business development and marketing for bids and proposals, such as layouts, material estimates and specification review., • Prepares or reviews structural specification and necessary control documents based on project execution plan prior to commencement of any engineering or design activities., • Prepares design deliverables including calculations, specifications, schedules, and layouts to enable procurement, supply, fabrication, installation and construction to take place., • Supports and organizes vendor technical clarification meetings., • Conducts pipe stress analysis and determines structural and pipe support loads, • Undertakes Stellar Energy factory supervision work or site supervision work when required., • Provides technical assistance to the project team as required (e.g. subcontract evaluation, scope definition, design layout etc.). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Technical capacity., • Problem solving/analysis., • Excellent written and verbal communication., • Interpersonal and customer service skills. Work Environment Most work is performed in an office environment. Regular trips to the Fabrication Shop for observation and support may be necessary which may require the use of personal protective equipment such as safety glasses, steel-toed boots, and head protection. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This is largely a sedentary role; however, some filing is required. This would require the ability to lift files, open filing cabinets and bend or stand as necessary. The employee must occasionally lift or move up to 25 pounds. The employee must be able to bend, climb, stoop, or stretch as required to examine fabricated components at the site or fabrication shop. Expected Hours of Work This is a full-time position. Days and hours of work are Monday through Friday, 8:00 a.m. to 5 p.m. Travel Anticipated 15% travel for this position. Some occasional local day travel may also be necessary. Required Education and Experience • Bachelor of Science degree in Civil or Structural Engineering from an accredited University., • Minimum of 5-7 years of experience in Power Plant, Industrial Plant design or similar working experience., • Familiar with local and international codes and standards, regulations, and implementations., • Familiar with design procedure and coordination with other disciplines., • Familiar with engineering deliverables and level of detail requirements at different stages of a project. Preferred Education and Experience • Master’s degree in civil or Structural Engineering from an accredited University., • P.E. stamp license, • Proficient in the use of STAAD or similar structural computer software., • Knowledge of CAD software (AutoCAD preferred)., • Knowledge of Advanced Steel modelling software., • Professional Engineer Registration with the ability to become registered in Florida. Work Authorization Must be authorized to work in the United States. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Position Title: Junior Database Developer Position Overview: S2Technologies ais seeking a Junior Database Developer to support Littoral Combat Ship Squadron TWO (LCSRON TWO). To improve their Squadron duties, including administrative control, training, maintenance, and readiness of assigned LCS ships and logistics support. In this role, you shall provide database design and creation for metrics analysis, technical multi-user, web-based (Microsoft Access, SharePoint, SQL or similar) and database subject matter expertise. The developer with our analyst and Subject Matter Experts (SMEs) to develop/create, update, and maintain databases to track and report data metrics and interpretive analysis from existing and new databases for maintenance, sustainment, and other operational needs, services, and requirements pertaining to Preventative Maintenance Availabilities (PMAV), Operational Availability (Ao), Material Availability (Am), Train to Qualify (T2Q) Replacement Sailors, and other standard practices. At times, these metrics and results will require updates to support management decisions and Flag level briefs. Some of these datasets have designs already drafted and/or processes in place using spreadsheets to collect the information. Some needs are not yet identified or designed. You will also assist in developing associated streamlined processes to reduce unnecessary work, churn, and duplicative efforts. You will assist/support LCSRON TWO Chief of Staff and Department Heads, as directed by the Chief f Staff, on a day-to-day basis in identifying, formulating, developing, and preparing comprehensive immediate and long-term process improvement recommendations; enabling LCSRON TWO to provide continuous, effective flow of information and responses to requirements for data and analysis, and to keep up to the pace of new and emerging technologies as they occur. Additionally, you shall provide the Chief of Staff and Department Heads, as directed by the Chief of Staff, with qualitative and quantitative reports, graphs, and charts that evaluate and measure the effectiveness of appropriate data collection, analysis, objectives and goals including trends, ranked items by performance, cycle times and analytical support for decisions and briefs Responsibilities • Assist in development of information to improve maintenance activities, • Create methods to pull applicable reports and queries from the databases and perform analysis and metrics on the data as agreed to by the associated work groups to meet business needs, • Provide expert guidance and recommendations in the design and development of tools, processes, metrics, and reports to meet the business needs, • Provide products that convey complex analysis in easy to understand methods like graphs, charts, and tables, • Use Access, SharePoint, SQL, VBA, HTML and other such tools of various database and web-design software to organize, analyze, and interpret data Basic Qualifications • Three years of specific experience with developing databases, business analysis, Access, SharePoint, MS Office Suite, SQL, VBA, HTML, and other similar areas and applications, • Bachelors degree or equivalent experience with in the areas of database development or computer related fields, • Experience with Access, SharePoint and other similar business analyst software and applications Desired Skills and Knowledge • Superior communication skills, • Experience with the US Navy, • Experience with maintenance programs and analysis, • Experience working with senior leadership, • Experience with various database software $68,000-$96,000 Location: Onsite - Mayport FL Clearance: US Citizen Required. Active Secret Clearance Required S2Technologies is an equal-opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, ethnicity, national origin, color, religion, sex, physical or mental disability, protected veterans' status, or any other status protected by the laws or regulations in the locations where we operate. Applicants living in a HubZone designated area receive preferential selection when meeting all other required qualifications.

Job DescriptionAre we the road to your future? We are currently searching for an experienced Ports Engineer Practice Lead to support our Southeast Region located in Florida. To be considered for this position, applicants must have, at minimum, a Bachelors or Masters degree in Civil/Structural Engineering. What you’ll be doing: • Serving as a practice builder and growing the SE Region’s ports practice, • Conducting ongoing business development activities, • Hiring, managing, and motivating staff, • Independently performing and supervising structural analysis and design for marine and upland components, • Independently performing and supervising berthing and mooring analyses, • Leading development of plans, specifications, schedules, and cost estimates for a variety of port projects, • Applying a strong understanding of maritime codes and references including UFC, PIANC, ASCE-61, • Independently preparing basis of design, design calculations, technical reports, alternatives analyses, and study reports, • Utilizing your appropriate understanding of interdisciplinary requirements for port projects to improve project processes and perform QA/QC reviews, • Attending client meetings and performing site visits, • Mentoring a team of developing port and maritime engineers, • Leveraging existing industry relationships to promote Volkert ports services and cross-sell across all disciplines, • Performing additional responsibilities as required by the region’s business needs What you need to have: • Bachelors or Masters degree in Civil/Structural Engineering, • Minimum 10 years of experience in analysis and design of port structures, • Professional Engineer (PE) License in the State of Florida, • Excellent written and oral communication skills, • Previous experience in analysis and design of medium to large scale ports/maritime/structures and preparation of plans, specifications, and estimates, • Proven experience in business development, • Ability to hire, manage, and motivate staff, • Existing relationships with port entities in FL, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines., • Valid driver's license. Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-HF1 Florida

Job DescriptionCYBERSECURITY ENGINEER - REMOTE ARC Group has an immediate opportunity for a Cybersecurity Engineer! This position is 100% remote working eastern time zone business hours. This is starting out as a contract position running through December 2025 with strong potential to extend longer or convert to FTE. This is a fantastic opportunity to join a well-respected organization offering tremendous career growth potential. At ARC Group, we are committed to fostering a diverse and inclusive workplace where everyone feels valued and respected. We believe that diverse perspectives lead to better innovation and problem-solving. As an organization, we embrace diversity in all its forms and encourage individuals from underrepresented groups to apply. 100% REMOTE! Candidates must currently have PERMANENT US work authorization. Sorry, but we are not considering any candidates from outside companies for this position (no C2C, 3rd party / brokering). We are seeking a highly skilled Cybersecurity Engineer to join our team, with a focus on web application security, threat protection, and vulnerability analysis. As a key member of the cybersecurity team, you will be responsible for implementing and managing web application firewalls, bot protection systems, and vulnerability scanning tools to ensure the security and integrity of the organization's web applications and data. In addition, you will be responsible for analyzing and helping developers in remediating vulnerabilities and staying up-to-date with emerging threats and technologies to continuously improve our security posture. Essential Functions • Implement and manage web application firewalls (WAFs) and bot protection systems to detect and prevent malicious traffic and attacks., • Manage vulnerability scanning tools and technologies to identify and remediate vulnerabilities in web applications and systems., • Develop and maintain policies and procedures for web application security, including WAF configuration, bot protection, and vulnerability management., • Collaborate with cross-functional teams to ensure WAFs and bot protection systems are integrated with other security systems and applications., • Develop and maintain documentation for WAFs and bot protection systems, including technical guides, policies, and procedures., • Provide training and support to other teams regarding vulnerability findings and remediation., • Stay up-to-date with industry trends and emerging threats, and recommend improvements to web application security infrastructure and systems., • Perform vulnerability management for web applications, including: Dynamic scanning using tools such as HCL AppScan and/or Burp Suite., • Static scanning throughout the development lifecycle., • Identifying and prioritizing vulnerabilities based on risk and impact., • Collaborating with development teams to remediate vulnerabilities and implement secure coding practices., • Conducting regular web application security testing and providing recommendations for improvement. Additional Required Qualifications, • 4+ years of experience in vulnerability management, with a strong understanding of web application vulnerabilities and remediation methods., • Experience with application vulnerability scanning software and/or platforms such as HCL AppScan, BurpSuite, Zed Attack Proxy, Nessus, etc., • Excellent problem-solving skills, with the ability to analyze complex technical issues and develop creative solutions., • Strong communication and collaboration skills, with the ability to work effectively with cross-functional teams. Required Licenses and Certifications SSCP (or greater) certification required within 180 days of hire. Preferred Qualifications Experience with F5 web application firewalls. Knowledge of scripting languages, such as PowerShell or Python. Experience with agile development methodologies and DevOps practices. Would you like to know more about our new opportunity? For immediate consideration, please send your resume directly to John Burke at or apply online while viewing all of our open positions at . ARC Group is a Forbes-ranked a top 20 recruiting and executive search firm working with clients nationwide to recruit the highest quality technical resources. We have achieved this by understanding both our candidate's and client's needs and goals and serving both with integrity and a shared desire to succeed. At ARC Group, we are committed to providing equal employment opportunities and fostering an inclusive work environment. We encourage applications from all qualified individuals regardless of race, ethnicity, religion, gender identity, sexual orientation, age, disability, or any other protected status. If you require accommodations during the recruitment process, please let us know. Position is offered with no fee to candidate.

Job Description What you’ll be doing: The Tunnel Operator will be responsible for guiding vehicles into the wash tunnel and ensuring a smooth and efficient operation. Your primary goal will be to provide exceptional customer service while maintaining safety and operational standards. • Direct vehicles into the wash tunnel safely and efficiently, ensuring that each vehicle is properly positioned for the wash process., • Greet customers warmly, provide instructions on the wash process, and address any questions or concerns they may have, all while adding a smile and a thumbs up to enhance their experience., • Monitor and operate retract systems to safely guide vehicles through the wash process, maintaining awareness of surroundings and quickly addressing any potential hazards., • Conduct regular inspections of vehicles to ensure all windows and sunroofs are securely closed and truck beds are empty., • Ensure all vehicles can be washed safely., • Monitor the wash tunnel area for safety hazards, ensuring a safe environment for customers and staff., • Assist with the maintenance and cleanliness of the tunnel area and equipment, reporting any issues to management., • Ensure vehicles enter the tunnel swiftly and efficiently while checking for any obstructions or issues to guarantee optimal washing results without delays., • Work closely with the Site Manager and other team members to ensure smooth workflow and effective communication throughout the wash process., • High school diploma or equivalent., • Previous experience in a car wash, automotive, or customer service role is preferred but not required., • Strong communication and interpersonal skills., • Ability to work in a fast-paced environment while maintaining attention to detail., • Able to stand for extended periods and work outdoors in various weather conditions, including rain, snow, and sun., • Availability to work flexible hours, including weekends and holidays. Communication Job Knowledge & Technical Proficiency Customer Centric Approach Safety & Compliance Problem- Solving El Car Wash Benefits: • Full Comprehensive Benefits, • 401K Retirement Savings Plan with a 4% Match! Free Money!!, • On-the-Job Training and Career GROWTH, • Pet Insurance, • Work-Life Balance, • Mental Health Days, • Paid Time Off, • Maternity Leave, • Paternity Leave, • Tuition Reimbursement, • Neurodivergent Hiring Program El Car Wash, one of South Florida’s fastest-growing companies, is expanding into Michigan and looking for new team members. We offer a flexible career with above-industry-average income and excellent potential for long-term growth. Founded in 2011 and based in Miami, El Car Wash is the leading express car wash operator in Florida, with over 40 active locations and plans for more than 40 additional sites by 2026. We are proud to be the Official Car Wash of the Florida Panthers, and we partner with the University of Central Florida Athletics, Baptist Health, Advent Health, and many other local organizations. In Michigan, we are the Official Car Wash of the Detroit Lions and collaborate with various groups across our markets. Our unlimited wash program, high-quality products, exceptional customer service, and eco-friendly approach have made us the top car wash company in Florida, and now in Michigan. EL Car Wash is an Equal Opportunity Employer

Job Description Function: To identify, qualify and win high margin document management revenue streams within the local market place and throughout the United States. Primary focus will be generating new business, but will include managing and developing existing clients. Skills required: Qualified candidate will be a self-motivated, results oriented team player with a persistent and systematic approach to achieving sales targets. Skill set encompasses: · Proven success in identifying and converting new business sales from cold calling and other lead generation activities through to closure. · Excellent communication, presentation and persuasion skills to clients at all levels. · Skilled at developing and keeping relationships. · Excellent pipeline management with a proven ability to meet or beat sales targets. · Adept solution seller, able to leverage technology to provide high value add and high margin solutions. · Knowledge of local markets and contacts · Knowledge of technology based business solutions, (document management solutions a plus) · Knowledge of ACT software and Microsoft Office Products Responsibilities Include: · Sell entire array of ImageStoreHouse document management products and services · Pro-actively identify, qualify and develop profitable new business accounts, through a combination of telephone and in-person cold calling. · Follow up qualified leads for appointments, developing leads from events, and managing new client site visits. · Record and update leads and existing client contacts utilizing the ACT CRM tool, and produce regular sales reports. · Establish and manage pipeline. · Produce and present customized presentations for new business opportunities. · Close sales, gather all detailed information, and develop a sales plan for the account. · Maintain cooperative working relationships with project and operations management to ensure sales are processed efficiently to achieve customer satisfaction and appropriate profit margin. · Provide customers with the highest standard of customer service through constant contact and consultation after the sale to protect and grow market share. Please include references with resume. Thank you. Company DescriptionImageStoreHouse employs cutting-edge, state-of-the-art document imaging, electronic storage and Internet retrieval services to provide our clients with a comprehensive, all-inclusive Electronic Document Management System. As one of the fastest growing and most advanced Application Service Providers in the digital world, our technical structure and consolidated, proprietary business methodologies allow us to provide the optimum, most secure data storage and retrieval services at the lowest possible, long term cost to our clientsImageStoreHouse employs cutting-edge, state-of-the-art document imaging, electronic storage and Internet retrieval services to provide our clients with a comprehensive, all-inclusive Electronic Document Management System. As one of the fastest growing and most advanced Application Service Providers in the digital world, our technical structure and consolidated, proprietary business methodologies allow us to provide the optimum, most secure data storage and retrieval services at the lowest possible, long term cost to our clients

Job Description Job Summary/Objective: The Integration Technician will be responsible for the successful installation, configuration, and integration of wireless telecom systems, including base station equipment, antennas, and associated components for various telecom projects. This position requires a hands-on technician with experience in wireless technology, network troubleshooting, and the ability to work efficiently on-site to ensure that all equipment is properly integrated and functioning within the network. Primary Responsibilities: • Install, configure, and integrate wireless telecom equipment (e.g., antennas, base stations, routers, controllers, etc.) into telecom network infrastructure., • Perform software upgrades and configurations on wireless telecom equipment to ensure optimal functionality and compatibility with network components., • Conduct site surveys to assess locations for equipment installation and integration., • Ensure proper installation of hardware components (antennas, cables, power supplies, etc.) according to industry standards and project requirements., • Test and validate wireless systems after integration, including performing signal testing, network performance verification, and ensuring signal coverage is in line with specifications., • Troubleshoot network issues, identify root causes, and resolve problems related to integration and equipment functionality., • Document all work performed during integration, including system configurations, issues encountered, and resolution processes., • Provide detailed reports to management and clients regarding integration status, testing results, and any issues that may affect project timelines., • Work closely with project managers, engineers, and other technicians to ensure seamless coordination and successful project delivery., • Communicate effectively with team members and customers to ensure all technical specifications and deadlines are met., • Adhere to all safety protocols and regulations during installations, site visits, and troubleshooting activities to ensure a safe work environment., • Provide ongoing support for equipment post-integration, including troubleshooting, diagnostics, and repair., • Assist with preventative maintenance to ensure continuous operation and system health. Minimum Education and Experience: • High school diploma or equivalent required; Associate's degree in Electronics, Telecommunications, or related field preferred., • 2+ years of experience in telecom, wireless, or related technical field, with a strong focus on system integration, installation, and testing., • Valid driver’s license and ability to travel to various job sites. Additional Eligibility Qualifications: • Certifications such as CompTIA Network+, Cisco CCNA, or similar networking certifications are a plus., • Experience with RF (Radio Frequency) systems, telecom base station equipment, and network hardware is highly preferred. Competencies Required: • Proficiency in working with wireless telecom technologies, including LTE, 5G, Wi-Fi, and associated components., • Familiarity with network protocols, IP networks, routers, switches, and signal testing equipment., • Strong problem-solving and troubleshooting skills, with the ability to work independently and under pressure., • Basic understanding of networking and integration tools (e.g., spectrum analyzers, signal testers, etc.)., • Strong attention to detail with a focus on quality and accuracy., • Excellent communication skills, both verbal and written., • Ability to work effectively in a team-oriented environment., • Self-motivated and able to prioritize tasks effectively., • Ability to manage multiple projects and tasks simultaneously in a fast-paced environment. Work Environment/Physical Demands/Travel Required: • Ability to lift and carry equipment up to 50 lbs., • Comfortable working at heights, climbing ladders, and working in various outdoor environments (e.g., rooftops, towers, etc.). AAP/EEO Statement NextEdge provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, NextEdge complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. NextEdge expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of NextEdge employees to perform their job duties may result in discipline up to and including discharge. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Are you an experienced Clinical Lab Professional? Are you looking to looking to embark on a new challenge in your career, or start your career in Clinical Lab Science? If so, LabCorp wants to speak with you about exciting opportunities to join our team at Ascension Riverside Hospital in Jacksonville, FL. In this position you will work in a fast paced, customer focused, and challenging environment, and will be a part of our overall mission at LabCorp: "Improving Health, Improving Lives". Work Schedule: 2nd shift; Monday - Friday (2:30P-11:00P) & rotating weekends Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please ___. Job Responsibilities: • Determine the acceptability of specimens for testing according to established criteria, • Perform routine and complex technical procedures and functions according to departmental Standard Operating Procedures, • Monitor, operate and troubleshoot instrumentation to ensure proper functionality, • Demonstrate the ability to make technical decisions regarding testing and problem solving., • Prepare, test and evaluate new reagents or controls, • Report accurate and timely test results in order to deliver quality patient care, • Perform and document preventive maintenance and quality control procedures, • Identify and replenish testing bench supplies as necessary, • Assist with processing of specimens when needed, • Maintain a safe work environment and wear appropriate personal protective equipment Requirements: • Bachelor's degree in a Chemical or Biological science, Clinical Laboratory Science, Medical Technology or meet local regulatory (CLIA & State) requirements, • Florida state Medical Technologist/Technician (MT/MLT) license is required, • Previous clinical laboratory testing experience is highly preferred, • ASCP or AMT certification is preferred, • Ability to work independently and within a team environment, • Proficient with computers; Familiarity with laboratory information systems is a plus, • High level of attention detail along with strong communication and organizational skills, • Must be able to pass a standardized color vision screen, • Flexibility to work overtime or other shifts depending on business needs If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today! Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our ___ or contact us at ___ For more information about how we collect and store your personal data, please see our ___.

Are you an experienced Clinical Lab Professional? Are you looking to embark on a new challenge in your career, or start your career in Clinical Lab Science? If so, LabCorp wants to speak with you about exciting opportunities to join our team as a Technologist within Ascension Riverside Hospital in Jacksonville, FL. In this position you will work in a fast paced, customer focused, and challenging environment, and will be a part of our overall mission at LabCorp: "Improving Health, Improving Lives". Schedule: Friday/Saturday/Sunday 7pm-7am Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please ___. Job Responsibilities • Determine the acceptability of specimens for testing according to established criteria, • Perform routine and complex technical procedures and functions according to departmental Standard Operating Procedures, • Monitor, operate and troubleshoot instrumentation to ensure proper functionality, • Demonstrate the ability to make technical decisions regarding testing and problem solving, • Prepare, test and evaluate new reagents or controls, • Report accurate and timely test results in order to deliver quality patient care, • Perform and document preventative maintenance and quality control procedures, • Identify and replenish testing bench supplies as necessary, • Assist with processing of specimens when needed, • Maintain a safe work environment and wear appropriate personal protective equipment Requirements: • Bachelor's degree in Chemical or Biological science, Clinical Laboratory Science, Medical Technology or meet local regulatory (CLIA & State) requirements, • Florida state Medical Technologist (MT or MLT) license is required, • Previous clinical laboratory testing experience is highly preferred, • ASCP or AMT certification is preferred, • Ability to work independently and within a team environment, • Proficient with computers; Familiarity with laboratory information systems is a plus, • High level of attention to detail along with strong communication and organizational skills, • Must be able to pass a standardized color vision screen, • Flexibility to work overtime or other shifts depending on business needs If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today! Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our ___ or contact us at ___ For more information about how we collect and store your personal data, please see our ___.

Job Description ABOUT THE INTERNSHIP SportsMEDIA Technology (SMT) Jacksonville-based events operations team supports sporting events all across North America and the world. The scope of this department includes event preparation, support and management, working with our clients and other events teams (Video Production, I.T., Electronics) for some of the biggest sporting events of the spring, including the Boston Marathon, TPC Sawgrass and The Charleston Open. The Sports Events Intern is a position that serves to satisfy scholastic “work-exposure” degree requirements while at the same time exposing potential Events Staff candidates to the SMT Events Department. As an event intern, you will work in a support role for event preparation (with on-site services staff), onsite event delivery, and post-event wrap-up for events and services. You will get hands-on sporting events operation experience, while working with and learning from SMT Event Project Managers and Event Staff. This is an on-site spring internship in Jacksonville, FL, averaging 35-40+ hours a week. Pay for this internship is $15.50/hour. Events Interns will report to our Director of Events. YOUR DAILY IMPACT AT SMT • Works with SMT staff to prepare equipment for event service delivery, • Assists in day-to-day duties as needed within the SMT Events Department, • Perform risk management to minimize any project issues or safety concerns, • Maybe used to work in other SMT departments as needed, • Will be assigned to work SMT events as needed, • Will be asked to work weekends and holidays when necessary, • Participate in the loading, unloading, and inventory tracking of SMT equipment, • Assists with ensuring cleanliness and orderliness of warehouse WHAT YOU BRING TO SMT • Currently enrolled in a college program (prefer Sport Management, Communications, Hospitality or IT majors), • Prior event management / sponsorship or networking / IT experience preferred, • Project management and/or event coordination preferred, • Sport industry knowledge helpful (specifically tennis, golf, or CrossFit), • Must be able to:, • travel 50-70 %., • obtain US passport, or other authorization into various worldwide locations., • lift and carry 70 lbs., • work in high pressure environments and problem solve efficiently, • be dependable in terms of punctuality and task performance efficiency, • travel to both domestic and internationally events during internship, • Basic events operations experience helpful, • Sound software knowledge of MS Office products (Word, Excel, Outlook, Teams) required, • Sound organizational, communication (both oral and written), and time management skills., • Technical background or technical aptitude highly preferred, • Fluency in foreign language helpful, • Demonstrated leadership in athletics, academics or past work experience What Can SMT Offer You? Your work will directly contribute to the success of our SMT teams, driving innovation and changing the game of sports broadcast, events and data collection technology. You will learn hands-on about the preparation, planning, and deployment of technology into sporting events, particularly golf, tennis and endurance sports. This internship is PAID! Who is SMT? SMT is the leader in real-time data and graphics solutions for the biggest events in sports. From the famous Yellow First Down Line to leading-edge analytics, virtual enhancements and behind-the-scenes tools like video board production and talent prompters, SMT powers the fan experience across every screen and stadium. For over 40 years, we’ve helped shape the broadcast and in-venue presentation of the Olympics, Super Bowls, Triple Crowns, tennis Grand Slams, golf majors, NASCAR, NHL, NBA, NCAA tournaments and more. But we’re more than our tech: Our team thrives on the adrenaline of live sports. We travel together, work hard together and form lifelong bonds along the way. Whether we’re launching graphics during a game or hitting the lanes for our bowling league, we’ve got each other’s backs. Are you ready to be a game changer? Learn more at SMT.com or follow us on social. Are you ready to join the SMT Team and become a Game Changer? Apply Now! SMT provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Please let us know when you apply if you need any assistance during the recruiting process due to a disability. SMT participates in E-Verify.

Job Description Linder Industrial Machinery Company is recognized as one of the nation's premier heavy equipment dealers providing quality new, used and rental equipment across 27 branch locations in Florida, Georgia, Virginia, South Carolina, and North Carolina. Linder's commitment to delivering superior industrial machinery solutions is shared by our leading equipment partners such as Komatsu, BOMAG, Deutz Fahr, Atlas, Konecranes, Mantsinen, Superior Brooms, Terramac, and many more. Up to $5000 Sign on BONUS! This position is responsible for the repair of construction machines, component assemblies, and parts in the shop, including diagnosing, parts ordering, technical report writing, warranty reporting, maintaining care of company assets, and proper communication with others. Responsibilities: • Repairs equipment and components, including, • Development of a repair plan and sequence, • Determining necessary parts, materials, tooling, etc., • Performing repairs properly and safely, with proper quality assurance testing of repair component or system and machine, • Maintains and completes all necessary reports legibly and in a timely fashion for parts ordering, special tooling usage, daily service reports, and work order closure, • Communicates progress of repair with direct supervisor as required, • Retrieves and returns parts and/or materials through Company’s parts ordering system, • Retrieves and returns special tools through Company’s Tool Room. Maintains proper care and use of special tools including major shop equipment, such as but not limited to, air compressor, cleaning tanks, overhead and jib cranes, etc., • Uses Company vehicle, and fuel cards properly, • Maintains work area in a safe and clean manner, • Maintains tools and tool carrier in a safe, productive and updated manner, • Follows all company policies and procedures, • Observes all safety guidelines High School Diploma or G.E.D. equivalent Associate Degree in Diesel or Equipment Technology or four (4) Years of apprenticeship experience Technician Classification is based on experience, knowledge, and competence Physical Demands: While performing the duties of this job, the employee is required to sit, stand, walk, and use hands to finger, handle, or feel. Also, employee is required to reach with hands and arms, climb or balance, stoop, kneel, lift, crouch, or crawl, as well as talk and hear. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions and moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, outside weather conditions, extreme cold, extreme heat, and vibration. The noise level in the work environment is moderate to loud. Linder Industrial Machinery Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Linder Industrial Machinery Company is recognized as one of the nation's premier heavy equipment dealers providing quality new, used and rental equipment across 27 branch locations in Florida, Georgia, Virginia, South Carolina, and North Carolina. Linder's commitment to delivering superior industrial machinery solutions is shared by our leading equipment partners such as Komatsu, BOMAG, Deutz Fahr, Atlas, Konecranes, Mantsinen, Superior Brooms, Terramac, and many more. Up to $5000 Sign on BONUS! Job Summary: This position is responsible for the repair of construction machines, component assemblies, and parts in the shop, including diagnosing, parts ordering, technical report writing, warranty reporting, maintaining care of company assets, and proper communication with others. Responsibilities: • Repairs equipment and components, including, • Development of a repair plan and sequence, • Determining necessary parts, materials, tooling, etc., • Performing repairs properly and safely, with proper quality assurance testing of repair component or system and machine, • Maintains and completes all necessary reports legibly and in a timely fashion for parts ordering, special tooling usage, daily service reports, and work order closure, • Communicates progress of repair with direct supervisor as required, • Retrieves and returns parts and/or materials through Company’s parts ordering system, • Retrieves and returns special tools through Company’s Tool Room. Maintains proper care and use of special tools including major shop equipment, such as but not limited to, air compressor, cleaning tanks, overhead and jib cranes, etc., • Uses Company vehicle, service truck, and fuel cards properly, • Maintains work area and/or service vehicle in a safe and clean manner, • Maintains tools and tool carrier in a safe, productive and updated manner, • Follows all company policies and procedures, • Observes all safety guidelines, • Performs other tasks as requested by manager Education/Experience/Skills: High School Diploma or G.E.D. equivalent Associate Degree in Diesel or Equipment Technology or four (4) Years of apprenticeship experience Technician Classification is based on experience, knowledge, and competence Physical Demands: While performing the duties of this job, the employee is required to sit, stand, walk, and use hands to finger, handle, or feel. Also, employee is required to reach with hands and arms, climb or balance, stoop, kneel, lift, crouch, or crawl, as well as talk and hear. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions and moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, outside weather conditions, extreme cold, extreme heat, and vibration. The noise level in the work environment is moderate to loud. Linder Industrial Machinery Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Linder Industrial Machinery Company is recognized as one of the nation's premier heavy equipment dealers providing quality new, used and rental equipment across 27 branch locations in Florida, Georgia, Virginia, South Carolina, and North Carolina. Linder's commitment to delivering superior industrial machinery solutions is shared by our leading equipment partners such as Komatsu, BOMAG, Deutz Fahr, Atlas, Konecranes, Mantsinen, Superior Brooms, Terramac, and many more. Up to $5000 Sign on BONUS! Job Summary: This position is responsible for the repair of construction machines, component assemblies, and parts in the shop and field, including diagnosing, parts ordering, technical report writing, warranty reporting, maintaining care of company assets, and proper communication with others. Responsibilities: • Repairs equipment and components, including, • Development of a repair plan and sequence, • Determining necessary parts, materials, tooling, etc., • Performing repairs properly and safely, with proper quality assurance testing of repair component or system and machine, • Maintains and completes all necessary reports legibly and in a timely fashion for parts ordering, special tooling usage, daily service reports, and work order closure, • Communicates progress of repair with direct supervisor as required, • Retrieves and returns parts and/or materials through Company’s parts ordering system, • Retrieves and returns special tools through Company’s Tool Room. Maintains proper care and use of special tools including major shop equipment, such as but not limited to, air compressor, cleaning tanks, overhead and jib cranes, etc., • Uses Company vehicle, service truck, and fuel cards properly, • Maintains work area and/or service vehicle in a safe and clean manner, • Maintains tools and tool carrier in a safe, productive and updated manner, • Follows all company policies and procedures, • Observes all safety guidelines, • Performs other tasks as requested by manager Education/Experience/Skills: High School Diploma or G.E.D. equivalent Associate Degree in Diesel or Equipment Technology or four (4) Years of apprenticeship experience Technician Classification is based on experience, knowledge, and competence Physical Demands: While performing the duties of this job, the employee is required to sit, stand, walk, and use hands to finger, handle, or feel. Also, employee is required to reach with hands and arms, climb or balance, stoop, kneel, lift, crouch, or crawl, as well as talk and hear. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions and moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, outside weather conditions, extreme cold, extreme heat, and vibration. The noise level in the work environment is moderate to loud. Linder Industrial Machinery Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionOverview Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. We offer comprehensive benefits for most full-time positions, including medical, dental, and vision coverage, life insurance, a retirement plan, employee assistance programs, company discounts, perks, and more. Job Description Allied Universal Services is seeking the position of an Armed Security Shift Supervisor. Full Time Starting Pay Rate: $18.00 per hour Friday 3pm - 11pm, Saturday - Sunday 7am - 3pm, Monday - Tuesday 11pm - 7am Saturday - Wednesday 3pm - 11pm Wednesday - Sunday 11pm - 7am Weekly Pay! No Cost Uniforms! Employee Referral/Retention Bonus Program! The Armed Security Shift Supervisor will supervise and coordinate the delivery of quality services on a specific shift at an assigned customer. An Armed Security Shift Supervisor acts as a liaison between site supervisor, Account Manager/Field Operations Manager and professional security officers. They supervise staff on assigned shift, providing coaching, recognition and discipline within approved empowerment range. QUALIFICATIONS/REQUIREMENTS: • Be at least 21 years of age with high school diploma or equivalent, • 1+ Years Armed Security/Military/Law Enforcement, • Supervisory Experience, • Possess effective written and oral communication and interpersonal skills with ability to deal with all levels of personnel and the general public in a professional and effective manner Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment. • As a condition of employment, employee must successfully complete a background investigation and a drug screen in accordance with all federal, state, and local laws, • Display exceptional customer service and communication skills, • Have intermediate computer skills to operate innovative, wireless technology at client specific sites, • Ability to handle crisis situations at the client site, calmly and efficiently, • Communicate staffing needs on shift to Account Manager or Operations Manager, • Assure that officers receive appropriate training, developing them in both technical and professional skills, • Assure that employee grievances are heard with help from appropriate district or region HR support employees and Account or Operations Manager, • Administer JSA's and safety programs outlining site-specific hazards for professional security officers on assigned shift including vehicle/driving safety as appropriate to Corporate procedures, • Assist Account or Operations Manager to manage uniforms, equipment, supplies and vehicles utilized at the account, maintaining appropriate inventories and maintenance checklists, • Able to:, • Work in various environments such as cold weather, rain/snow or heat, • Occasionally lift or carry up to 40 pounds, • Climb stairs, ramps, or ladders occasionally during shift If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1423265

Job Description Linder Industrial Machinery Company is recognized as one of the nation's premier heavy equipment dealers providing quality new, used and rental equipment across 27 branch locations in Florida, Georgia, Virginia, South Carolina, and North Carolina. Linder's commitment to delivering superior industrial machinery solutions is shared by our leading equipment partners such as Komatsu, BOMAG, Deutz Fahr, Atlas, Konecranes, Mantsinen, Superior Brooms, Terramac, and many more. Up to $5000 Sign on BONUS! (Preferably in the St. Augustine area.) Job Summary: This position is responsible for the repair of construction machines, component assemblies, and parts in the shop and field, including diagnosing, parts ordering, technical report writing, warranty reporting, maintaining care of company assets, and proper communication with others. Responsibilities: • Repairs equipment and components, including, • Development of a repair plan and sequence, • Determining necessary parts, materials, tooling, etc., • Performing repairs properly and safely, with proper quality assurance testing of repair component or system and machine, • Maintains and completes all necessary reports legibly and in a timely fashion for parts ordering, special tooling usage, daily service reports, and work order closure, • Communicates progress of repair with direct supervisor as required, • Retrieves and returns parts and/or materials through Company’s parts ordering system, • Retrieves and returns special tools through Company’s Tool Room. Maintains proper care and use of special tools including major shop equipment, such as but not limited to, air compressor, cleaning tanks, overhead and jib cranes, etc., • Uses Company vehicle, service truck, and fuel cards properly, • Maintains work area and/or service vehicle in a safe and clean manner, • Maintains tools and tool carrier in a safe, productive and updated manner, • Follows all company policies and procedures, • Observes all safety guidelines, • Performs other tasks as requested by manager Education/Experience/Skills: High School Diploma or G.E.D. equivalent Associate Degree in Diesel or Equipment Technology or four (4) Years of apprenticeship experience Technician Classification is based on experience, knowledge, and competence Physical Demands: While performing the duties of this job, the employee is required to sit, stand, walk, and use hands to finger, handle, or feel. Also, employee is required to reach with hands and arms, climb or balance, stoop, kneel, lift, crouch, or crawl, as well as talk and hear. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment: While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions and moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, outside weather conditions, extreme cold, extreme heat, and vibration. The noise level in the work environment is moderate to loud. Linder Industrial Machinery Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description Work 100% remotely, set your own schedule, and earn additional income while making a real difference in men's health and lives. Hone is one of the fastest-growing health companies in the United States, and we are looking for physicians who have deep knowledge and experience in prescribing for men with hypogonadism. If you are a physician with a strong background in treating hypogonadism and experience prescribing testosterone and other hormone-optimizing pharmaceuticals, this is an opportunity to join a mission-driven team that is reshaping access to care. We treat patients with a combination of pharmaceutical products in accordance with AUA-defined protocols, supplements, and lifestyle changes. We are committed to making care more convenient and affordable for patients. Experience with weight-loss and thyroid medications is a plus, as we have expanded beyond men's hormones into these treatment areas. We have also launched services for women. Experience with women's hormone therapy allows you to see our female patients as well, but is certainly not required. We are looking nationwide and value physicians licensed in multiple states. Who We Are We're a modern health company with a simple mission: help our patients take control of their health and age with confidence. Our platform removes barriers to care through education, technology, and convenience. Our primary focus is hormone optimization for men. We are looking to add to our growing team of 150+ physicians who specialize in treating hormones and are passionate about improving patient outcomes through telemedicine. You'll join a supportive, innovative environment where you'll receive full training on our proprietary telemedicine platform, HIPAA-compliant technology, and technical support. What You'll Do • Conduct video-based consultations from anywhere with an internet connection, • Review labs and create personalized treatment plans, • Prescribe and titrate medications based on clinical findings, • Educate patients on safe and effective hormone optimization, • Provide feedback to help us continuously enhance the patient experienceWhat We're Looking For, • MD or DO with an active license (multi-state licenses preferred), • Minimum 2 years of experience in Endocrinology, Urology, Family Medicine, or Hormone Therapy, • DEA license with authority to prescribe Schedule III medications, • Strong communication skills and a passion for patient-centered care, • Comfort with technology and willingness to learn telemedicine workflows, • Availability for at least 8 hours per week, • A prescribing philosophy that values holistic care and hormone optimization, not just prescribing testosterone to everyone Help men regain their health and confidence - from anywhere. If you are passionate about hormone health, thrive in innovative environments, and want to help men live their best lives, we would love to hear from you.

Job DescriptionNow Hiring in Orange Park, FL! Join a Team Thats Passionate About Exceptional Animal Care! Are you a skilled veterinary technician who loves the precision and pace of surgery? Do you take pride in supporting successful surgical outcomes and want to advance your anesthesia and surgical nursing skills? If so, wed love to meet you! We are a thriving, privately owned specialty veterinary hospital opening a new location in Orange Park, FL, and were looking for experienced Surgery Veterinary Technicians to join our high-performing, compassionate team. What We Offer: Pay Differential Bonus for overnight shifts Flexible Scheduling No weekend shifts required Advanced Anesthesia & Surgical Monitoring Training Career Growth & Learning Opportunities Competitive Compensation Supportive, Fun Work Culture Daily Pet Interactions Health Insurance 401(k) Retirement Plan Real-Time PTO Accrual Uniform Allowance Available Shifts: Day Shift 1: 7:00 AM 5:00 PM (MondayFriday) Day Shift 2: 8:00 AM 6:00 PM (MondayFriday) Day Shift 3: 9:00 AM 7:00 PM (MondayFriday) *Saturday reduced shift on rotation Your Role: Assist in patient prep and recovery for surgical procedures Monitor anesthesia and maintain surgical records with accuracy Maintain sterile environments and assist with instrument sterilization Ensure patient comfort and safety throughout the surgical process Collaborate with board-certified Surgeons, Anesthetists, and the nursing team Advanced Surgery Tech Skills You'll Use and Develop: Surgical patient prep and positioning IV catheter placement and fluid therapy Anesthetic induction, monitoring, and recovery Familiarity with surgical instrumentation and sterile technique Pain management and post-op care Proper documentation and patient hand-offs What Were Looking For: At least 3 years of veterinary surgical or anesthesia experience Strong technical and animal handling skills Calm, detail-oriented mindset in a surgical setting Excellent communication and teamwork abilities Passion for surgical patient care and professional development Be a Part of Something Exceptional. If youre ready to build your surgical skills, work alongside experts, and join a team that values your contributionapply today and be part of our exciting Orange Park launch! #VetTech #SurgeryTech #VeterinaryTechnician #OrangeParkVets #AnimalCareProfessionals

Job DescriptionDescriptionOur hospital is seeking a Full-Time Veterinary Technician to help provide outstanding patient care and client service in a fast-paced, multi-doctor animal hospital. The Senior Veterinary Assistant is responsible for assisting Veterinarians in the care of animals. The Senior Veterinary Assistant helps during initial examinations by restraining animals when necessary, stocking examination and surgery rooms with supplies, sterilizing tools and ensuring that equipment is in working order. Technical skills may include, but are not limited to, and are subject to state limitations: venipuncture, catheter placement, anesthesia administration, anesthesia monitoring, dental prophy, radiography, administering medications, performing laboratory analysis, and client education. Senior Veterinary Assistant's also communicate with clients (pet owners) and update patient files. Ideal Candidate • Demonstrates professionalism, dependability, healthy and positive communication skills, and the ability to multi-task in a hands-on environment, • Energetic people-and-pet person with excellent work ethic and social and organizational skills, • Be compassionate/caring, • Willing to work flexible hours including weekends, • Prior Customer Service Experience, • Must be able to lift 40 lbs. Benefits • Health Care Plan (Medical, Dental & Vision Options), • 401k Match, • Generous paid time off (PTO), • Six (6) weeks of paid Parental Leave, • One (1) Work/Life Balance day off, • Short-term and long-term disability options, • Supplemental insurance options, • Discounted Veterinary Care, • Scrub allowance, • Hands-on and E-training, • Professional growth opportunities, • Tuition assistance for prospective Veterinary Technician Students

Job DescriptionSalary: Novatae Risk Groupis a national wholesale/brokerage for hard to place commercial insurance coverages. We are seeking experienced high new worth Personal Line Producer/Brokers for your area location. We are searching for candidate(s) who have demonstrated success in the insurance industry or MGA. We are expanding our capabilities for revenue generation and have a very generous compensation package to offer. Requirements: • Oversee the preparation of submissions to include applications and various support documents., • Favorable presentation of the account to the insurance carriers, and to proactively work in obtaining a compelling program., • Utilize your expertise and relationships for high net worth clients, • Market new and renewal business in conjunction with designated sales teams., • Collect all necessary information and analyze the current program., • Order applicable underwriting reports as needed., • Following submissions through the process, ensure quotes are provided in a timely manner., • Solicit new business through various sales and marketing techniques and begin establishing relationships., • Coordinate and handle administrative workflows in conjunction with support team(s) to establish accurate and prompt response to service issues., • Seek opportunities for growth and cultivate new markets and to include organic growth. Qualifications: • Skilled in business writing and situation analysis., • Energetic, self-motivated individuals who are goal oriented and can thrive in a team environment and autonomously., • Strong knowledge and experience with personal lines of property and casualty insurance including coverages, rating, terminology and technical procedures. P&C license / E&S licenses., • Must be sales driven, people person who likes to establish new relationships while learning communication strategies and sales methods., • A four-year college degree is preferred with 1-3 years of relative experience. Past experience should include either Wholesale Broker or MGA experience. Equal Employment Opportunity At Novatae Risk Group, we celebrate and support our differences. We know employing a team rich in diverse thoughts, experiences, and opinions allows our employees, our products, and our community to flourish. Novatae is honored to be an equal opportunity workplace. We are dedicated to equal employment opportunities regardless of race, color, ancestry, religion, sex, national orientation, age, citizenship, marital status, disability, gender identity, sexual orientation, or Veteran status. In addition, Novatae makes reasonable accommodations to known physical or mental limitations of an otherwise qualified applicant or employee with a disability, unless the accommodation would impose an undue hardship on the operation of our business.

Job Description Join Our Team: Counter Sales Associate Wanted! Are you a sales-driven professional with a passion for delivering exceptional customer service? Look no further! Baker Distributing Company, a leading wholesale HVAC distributor, is seeking a skilled Counter Sales Associate to join our team. As a key representative of our company, you will provide top-notch service to customers, drive sales growth, and contribute to our success. If you're a motivated and organized individual with excellent communication skills, we want to hear from you! Apply now to take your career to the next level. Summary The Counter Sales Associate is responsible for our sales counter at one of our wholesale HVAC distributorships that carries multiple brands of equipment, parts, and supplies. The goal of this role is to provide strong customer service in a sales-oriented setting. Essential Duties/Accountabilities * Represent Baker Distributing Company as a leader in the industry ensuring maximum sales. * Interact with internal and outside salespeople, vendors, and contractors. * Responsible for showroom merchandising and re-stocking product. * Assist in resolving customer relations problems with both dealers and end users. * Complete sales order process for customers with efforts to up-sell associated items. * Service walk-in and telephone customers and assist with sourcing and shipping parts, inventory control and warranty administration. * Provide customer product and service needs by researching products via computer system, catalog, telephone or other reference sources. * Arrange stock on shelves or racks in sales area and keeps merchandise in order. * Apply suggestive selling techniques and up-sells to current and prospective customers. * Adhere to all company safety protocols and procedures. * Utilize personal protective equipment (PPE) as required. * Report any safety hazards or incidents immediately to management. * Participate in regular safety training sessions and drills. * Ensure a clean and organized workspace to prevent accidents and injuries. * Follow all guidelines for the safe handling and storage of products. * Maintain a professional and safe demeanor during all customer interactions. * Conduct outgoing customer sales or service calls and resolve customer complaints. * Perform other duties as assigned. Qualifications * High School Diploma or GED Required. * The ideal candidate will have excellent communication skills, a strong background in technical support, HVAC parts, and customer service/sales with intermediate MS Office capabilities. * Customer Service, Data Entry, Estimating, Purchase Orders, Sales, Shipping/Receiving * Minimum 1+ year experience in a Counter Sales role, preferably in the HVAC industry. * Knowledge of air conditioning, heating and ventilation equipment at a wholesale distribution level. * Strong interpersonal skills including sales, problem solving, and customer service focus absolutely required. * Ability to work independently but meet assigned goals and objectives in designated time frames. * Capable of working in a fast-paced environment with skills to multi-task at different levels. * Excellent customer service mindset with the ability to develop long-term relationships * Excellent written and verbal communication skills * Strong and creative problem-solving skills * Ability to work independently and in a team environment * Must be proficient in speaking, reading, and understanding English to ensure full compliance with safety standards, training, policies, and procedures. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. * Must be able to frequently lift up to 50 pounds. * The employee frequently is required to stand, sit or walk, climb, kneel, crouch, or crawl. * Ability to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. * The employee may use equipment such as forklifts, pallet jacks and other warehouse equipment. * Must be able to utilize heavy machinery. Powered by JazzHR egQMlPS9gK

Job Description About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About the Role: As a Survey Manager, you are accountable for the overall surveying procedures for large projects and specific clients within an assigned region. What You Will Be Doing: • Manage and coordinate surveying procedures and processes, including survey employees and survey subcontractors to ensure projects are surveyed correctly in order to meet or exceed project requirements, • Plan and ensure the execution of land surveys and other survey related documents, sign and seal surveys, • Interpret survey field notes to prepare certified boundary surveys, topographic surveys, right-of-way control surveys and other survey related documents. Process and verify the accuracy and sufficiency of collected data, • Provide everyday supervision of assigned survey field crew on quality and survey methodology, and gather all necessary information needed to meet the survey requirements, • Assist Director and Vice President of Surveying with business development, client management and preparation of proposals, • Monitor projects while interfacing with clients on technical matters., • Prepare and maintain project progress and status reports, letters, files and other documentation related to projects, • Schedule and order survey materials and/or equipment to ensure project timelines are met, • Analyze and interpret technical information and/or property descriptions for surveying or related operations, • Provide land boundary and surveying related expert testimony in court cases., • Utilize Civil3D, Trimble Business Center and other industry related software as needed to complete projects, • Bachelor’s degree in Surveying, Geomatics, or equivalent work experience in survey or civil engineering environment (required)•10+ years of experience in responsible charge of all aspects of surveying and mapping (required)•Professional Surveyor and Mapper license (PSM or PLS) (required)•Understanding of the power and utility industry (preferred)•A valid driver's license and driving record acceptable to our company insurance provider is a condition of initial and continued employment (required), • Ability to work in a safe manner and obey safety regulations at all times, • Proficient with latest version of Civil3D and other surveying and mapping software, • Proficient in running and adjusting various survey instruments including GPS equipment, levels, and robotic total stations with electronic data capabilities, • Proficient in technical math, including Geometry and Trigonometry, • Extensive knowledge of Microsoft Excel, Google Earth, Trimble business center, GIS and GPS, • Extensive knowledge of survey and mapping principles, practices, standards, procedures and project management, • Considerable knowledge of principles and practices of photogrammetric mapping, LiDAR and other remote sensing, • Must be highly organized with excellent verbal and written communication skills., • Must have the ability to work under pressure and meet fixed deadlines on a timely basis and have the ability to work both as an individual contributor and within a team environment You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job Description Calling all experienced salespeople with a track record of meeting goals and driving business growth! Expand your sales career and become a pivotal part of a reputable company by joining Weather Engineers, Inc. in Jacksonville, FL as our new full-time In-Home HVAC Sales Rep. We provide base pay and commission, with high-achieving performers having a six-figure earning potential! You normally work 8:00 am - 5:00 pm, Monday - Friday with some evenings and weekends to meet clients' needs. We also provide you with a vehicle, phone, and iPad. Join us to experience massive career growth and receive great benefits like: • Health, dental, and vision, • Paid time off (PTO), • Vacation time, • Paid holidays, • A 401(k) with a match ABOUT US At Weather Engineers, Inc., we take pride in our legacy as a family-owned and operated HVAC business that has been a staple in Jacksonville since 1963. As a member of our team, you'll join a company that values the principles of dedication, hard work, and unwavering commitment to customer satisfaction. Our mission revolves around providing unparalleled home comfort solutions to our community, ensuring that every household experiences the best in indoor air quality at the push of a button. As a second-generation, customer-centric organization, we understand the importance of a well-maintained HVAC system and the impact it has on our customers' lives. We continue to grow and innovate, utilizing the latest technological advancements to deliver top-tier installation, repair, service, maintenance, and duct cleaning. DOES THIS SOUND LIKE YOU? Our dream In-Home HVAC Sales Rep has an associate degree and organizational skills. Attention to detail and a self-motivated attitude would be preferred. Here are the minimum requirements: • 2+ years of sales experience, • Experience with in-home sales, • Proficiency with computers and MS Office, • Exceptional communication, presentation, and negotiation skills, • High school degree or equivalent, • Ability to work evenings and weekends READY TO APPLY? Our In-Home HVAC Sales Rep drives business growth by building new client relationships, strengthening existing ones, and directly working with leads to sell and promote our services. You're vital to our success and client satisfaction, and you do whatever you can to smash sales goals and take our business to the next level. Highly motivated to succeed, you engage with potential clients, analyze their HVAC systems, and deliver custom proposals to effectively meet their needs. You provide technical information, address any concerns, and promote maintenance programs to secure a steady line of business. Following up after a bid, you help prospects see the value in partnering with us and encourage them to finalize the sale. You emphasize the benefits they'll receive and follow up after a sale to ensure they're fully satisfied with our efforts. You forge new relationships, strengthen existing ones, and support our company's initiatives by participating in trade shows and referral groups. Advance your career and grow your potential as our In-Home HVAC Sales Rep! Apply with our short initial form. Must have the ability to pass a background check and drug screening test.

Job DescriptionWhy CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, professional development, and inspire you to be bold, yet accountable. We value our employee’s hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking Permitting Project Managers to oversee all activity with regards to his or her projects including, but not limited to, supervision of employees, project staffing, customer needs, workflow, service level agreements (SLA) adherence, financial performance, timely invoice approval, quality control, and all other aspects of work related to his or her projects. This role is customer facing requiring clear communications skills, both verbal and written, as well as polished and professional personal interactions. Responsibilities • Liaison between cities and jurisdictions, and build meaningful, long-term relationships in various markets., • Guide teams and participate with research and prepare documentation for required permits, right of ways, easements, and land use for telecom projects., • Create and maintain reports, while tracking progress of multiple projects – for complying with conditions of approvals from municipalities for meeting customer delivery deadlines., • Obtain all necessary permitting / zoning approval from Federal, State, and local agencies - Inform other internal functional groups about requirements and regulations of government entities and municipalities to assist with compliance with general conditions of approvals at permit and construction stages of the project, and to meet project timelines., • Oversees the preparation and submission of permit packages for permit applications adhering to strict standards and regulations., • Monitor staffing needs in the project group along with maintaining staffing projections., • Ensure that a Scope of Work is in place for all their projects., • Create and adhere to revenue, gross profit, accounts receivable, and staffing forecasts., • Act as the liaison between customers and the internal operations of the project group. This is to ensure that customer’s expectations are met and maintain goodwill for future business., • Execute project implementation/startup and continuous production management., • Monitor projects to improve the quality of the work and to reduce the time and cost of project throughput., • Create and promote the company image through exercising sound and ethical business practices as related to employees, the public and customers. This includes ensuring that service and quality provided to customers is superior to that of our competition., • Meet regularly with key personnel to ensure that information flows in both directions and to ensure that stated goals and objectives are met., • Implement corrective actions, as appropriate, on any project to meet cost targets, and completion schedules., • Ensures subordinates’ abilities are adequate for their responsibilities and develops training and cross training for ongoing skill development., • Assist personnel with interpreting customer drawings, project documentation, and technical specifications., • Conducts performance reviews for all direct reports. Does follow up on reviews with substandard grading. Create an environment in which the rating of an average employee is continually challenged. Create goals for employee during review and have mid-year follow up on said goals., • Complete invoicing within Service Level Agreements including follow up on unpaid invoices. Make sure purchase orders are in place prior to work startup., • Perform other related duties as assigned by their supervisor. Qualifications • 5+ years’ experience in permitting design, government affairs or related work in a Utility / Permitting environment in a related industry preferred., • 5+ years of Project Management experience in utility permitting or related field preferred., • In-depth understanding of NESC 202X code requirements preferred., • Regulatory Compliance Expertise: Advanced understanding of local, state, and federal regulations related to underground utilities, coupled with the ability to effectively incorporate these regulations into permit drawings,, • Advanced understanding of Telecom OSP Engineering and Construction standards to apply design standards to underground and aerial pole line cable plant, including Joint Use Design, Pole Replacement, Primary Service, and Reliability/Maintenance Design., • Proven leadership of a Make Ready Team to Perform structural loading calculations using O-Calc or Spida-Calc in accordance with NESC and pole owner protocol through inventory and analysis of pole type and class, riser details, attached facility type including weight and diameters, span footages, drip loops etc., • Ability to create 3-dimensional model of poles in O-Calc and Spida-Calc to provide results to ensure safe and proper attachment to power and telecommunication poles., • Analytical and observational skills, which demonstrate ability to, plan projects, review/recommend technical specifications, coordinate staffing needs, communicate, and manage all aspects of a project., • Proven ability to effectively prioritize and execute tasks in a high-pressure environment is crucial., • Effectively work independently and in a team-oriented, collaborative environment is essential., • Proven ability to solve problems creatively., • Persuasive, encouraging and motivating with the ability to elicit cooperation from a wide variety of sources, including upper management, clients, and other departments., • Ability to interact with colleagues, vendors, and customers/clients of all demographics and professional levels. Also, be able to gain credibility with them to effectively complete tasks., • Must be willing to learn new product lines and technologies to serve the departmental needs and goals., • Able to handle employee issues and confrontation effectively and in a timely manner., • History of successful customer communications and relationship management. Additional Information • This is a customer-facing position which will require up to 50% travel., • Must have a valid driver’s license., • Must have good, reliable home internet. Shift is Monday through Friday between the hours of 8:00am-5:00pm CST but must have flexibility to work outside normal business hours. Compensation: base salary range 75k-95k plus incentives. Benefits: healthcare, retirement, paid leave (e.g., sick leave, PTO, company holidays), life insurance, AD&D, short-term disability, FSA, education reimbursement, wellness reimbursement, and employee assistance program (EAP).

Job DescriptionSalary: $78,000 to $114,000 total compensation Hurd Construction Management is seeking Florida based Construction Managers and Construction Project Managers We are looking for talented, career-minded individuals based in Florida who want to continue building a project management career within the commercial development, construction, and real estate industries. Project managers plays a critical role in ensuring each and every day that our customers' and Hurd's quality control standards are met and maintained with a high degree of customer service. This role will directly service the commercial business operations in support of Hurd Construction Management's objectives. Positions are available for General Contracting (GC) and Construction Management (CMa) lines of business in central, southeast, southwest, and north Florida territories. Who is Hurd Construction Management? Hurd Construction Managementis a Jacksonville, Florida based construction advisor and general contracting firm specializing in commercial buildouts and renovations, new construction and development where delivering a strong and consistent brand experience is crucial. Projects primarily include retail, restaurant, office and other commercial spaces throughout the entire state of Florida. Hurd also focuses on providing systematic construction program management streamlining and strengthening large scale, multi-site initiatives. What does the role pay? This is a full-time hybrid or role with a pay range of $78,000 to $114,000 total compensation package including annual bonus at plan. Base salary iscommensurate with experience and qualifications. Travel • 70% of time involves performing internal planning, coordination, and administrative functions., • 30% of time involves travel throughout Florida overseeing assigned projects.Must also be willing to travel overnight from time to time. Role Summary Reporting to the Hurd Vice President (VP), the Project Manager is responsible for all facets of project management including the budgeting, scheduling, tracking, procurement, document control, safety, quality, and the managing of multiple General Contracting or Construction Management projects. Duties include the coordinating, and integration of multiple projects, and collaboration of people, suppliers, and stakeholders. Primary Responsibilities • Manage all construction activities, coordinate work and schedules with division leaders and the project team., • Collaborate with site Superintendents to evaluate and determine appropriate construction means and methods, and strategies, employing the most cost-effective plan and schedule., • Promote and maintain client relationships., • Review drawings and specifications, monitor progress, and ensure contractual compliance with plans and schedules., • Assist with the preparation of job estimates by interpreting bid documents., • Develop and write subcontracts and purchase order requisitions as required., • Establish, track, and manage project schedule to ensure critical path requirements are achieved by collaborating with site Superintendent., • Manage submittal and RFI process, ensuring that all information is reviewed and routed for necessary approval., • Ensure project financial success by establishing and managing project budgets; prepare and report on job cost, actively working to ensure project earnings are met., • Collaborate with project team to enact plans to improve production, efficiencies and reduce expenses., • Work closely with Construction Operations Manager and/or VP regarding resources required to meet project schedule., • Assist with safety compliance. Monitor compliance with company/project safety requirements and ensure corrective measures are implemented., • Ensure all project documentation is submitted in a timely manner., • Make regular site visits for coordination with the project's site Superintendent., • Be the primary point of contact for site Superintendent for assigned projects., • Direct communication with project Owners, Construction Managers, and project teams., • Attend onsite coordination meetings and project specific meetings., • Assist customers and/or sales opportunities in development and audit of proposal components such as specifications, scopes of work, and clarifications. Skills and Qualifications • The ability to read and understand construction drawings, specifications, contracts, manuals, technical correspondence, and written instructions., • Experience in contracts and construction procurement process., • Firm grasp of job estimates details, drawings and specifications., • Knowledge of workforce planning and labor resource allocation., • Solid communications skills to draft reports, prepare business letters, expositions and summaries., • Organization skills to coordinate and integrate projects, people, suppliers, and stakeholders., • The ability to develop and maintain positive internal and external collaborative relationships with local community/cultural organizations., • Strict attention to detail., • The ability to determine alternative work methods as needed. Experience and Other Requirements • Bachelors degree (Construction Management, Civil Engineering, or related field) or minimum 5 years equivalent experience., • Minimum 5 years project management experience working on commercial construction projects., • Capable of working with a diverse workforce., • Be self-directed and able to work independently within remote work environments., • Proficient in Microsoft365., • Have proven experience working in a computerized construction management system (ie. Procore, Sage)., • OSHA 10 or 30 certification (if not currently held must obtain within first 60 days)., • Commitment to continued professional growth and development., • Valid drivers license with acceptable driving record required., • Travel will be required and often overnight. BHRS Companies is an Equal Opportunity Employer. Drug test, motor vehicle, and background check required prior to placement.

Job Description LAUNCH Technical Workforce Solutions is seeking an energetic and organized Onsite Coordinator to support our Client in JACKSONVILLE. This role will serve as the liaison between client management and LAUNCH whose key role is to assure customer satisfaction and oversee all LAUNCH employees at the client site. Job Duties and Responsibilities: LAUNCH Responsibilities: • Responds to the site’s needs and its representative’s needs immediately, • Ensures LAUNCH is immediately notified of job openings, performance, and terms., • Fills out daily and weekly reports., • Assists with all payroll and timekeeping, • Serves as a point of contact for onsite technicians, recruiting team, sales team, workers’ comp office, compliance, and payroll departments., • Serves as an administrator for any and all necessary paperwork., • Provides onsite coverage during key times throughout the week., • Keeps a pre-approved schedule and lets appropriate parties know when you cannot be onsite during that schedule for any reason., • Follows all LAUNCH processes and procedures., • Keeps up with communication about site needs and goings on., • Effectively communicates all necessary information to contractors’ onsite., • Follows all onsite Workers’ Comp procedures and immediately provides all required Workers’ Comp paperwork to Workers’ Comp representative., • Must perform other responsibilities and duties within job scope as assigned by supervisor or manager. Client Site Responsibilities: • Meets with Human Resource representatives on regular basis to ensure needs are being met., • Ensures LAUNCH is the preferred provider of temporary labor., • Assists client with payroll, timekeeping, and reviews any time discrepancies, • Badges, checks in and checks out LAUNCH contractors on site., • Follows any administrative duties that the client requires., • Keeps up any information needed by client., • Ensures that the Site has minimal issues with contractors., • Ensures all issues are handled as quickly as possible., • Must work full-time onsite to provide value to client., • Responsible for addressing contractors entering worksite., • Responsible for disciplinary actions with contractors., • Other responsibilities as assigned Qualifications and requirements: • Great organizational skills., • Excellent computer skills. Ability to pull/build reports, open/close orders as well as build candidate profiles., • Ability to navigate client VMS software., • Reliable transportation- this site is large and requires travel back and forth between different areas., • Must be able to work flexible hours., • Must have a high school diploma., • Must be able to start immediately., • Must have effective communication skills., • Must have reliable transportation to and from job-site., • Must have a sense of urgency. Physical Requirements: • The employee will be required to sit and/or stand for extended periods of time., • Focus on objects close up., • Walk the hanger floor on a daily basis, • Climb stairs, steps, and scaffolding on a weekly basis., • Stoop, Kneel, and Crouch., • May be required to lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.

Job Description Project Manager Position Type: Full-time, Exempt, Salary Reports to: Vice President - Operations Supervisory Responsibility: None Location: Jacksonville, FL Company Summary Stellar Energy provides custom power augmentation and energy plant solutions for power generation and utilities, liquefied natural gas (LNG), data center, biopharma, and other markets. Stellar Energy’s innovative solutions include turbine inlet air chilling, inlet air conditioning (heating and cooling), evaporative cooling, direct contact air chilling, thermal energy storage, district cooling and central utility plants. The company’s experience spans more than 20 years and stretches across the globe, with offices in the United States, Asia and the Middle East and North Africa (MENA) region. Summary Objective Manages all aspects of small to medium complex projects from inception to conclusion. Someone with hands on Project Management experience at an EPC (Engineering, Procurement, and Construction) company strongly desired. Essential Functions: • Manages and coordinates all aspects of project execution from contract signing to customer delivery., • Generates and obtains management approval of an execution plan., • Prepares and conducts project kick-off meeting., • Reviews and manages fulfillment of contracts., • Coordinates the reviews and comments on the scope of work, contract, specifications, and supplementary client documentation., • Develops, maintains, monitors and updates project schedules to ensure milestones are met., • Collaborates with internal and external stakeholders to resolve issues that arise during the project life cycle., • Ensures client deliverables are submitted in a timely manner., • Generates and manages project budgets over the course of the project life cycle., • Creates and maintain a detailed cash flow and man-hours usage to ensure the project stays on budget., • Coordinates between internal resources, clients, vendors, sub-contractors, contractors, and technicians throughout execution., • Directs fabrication, installation, and start-up issues throughout execution., • Verifies project quality through oversight of in-process inspections at manufacturing facilities., • Manages change orders, building cost requirements and providing backup documentation., • Creates reports and projections for various levels within the organization., • Completes project closeout (i.e., punch list items, client final acceptance, etc.); and, • Responsible for warranty requests by generating and executing a corrective action plan., • Manages overall project leadership and decision-making (through proper channels)., • Manages Contract Handover Checklist, • Leads customer interface, communications, and management., • Manages budget development and timeline development oversite., • Manages project scope, • Attend/participate in gate reviews., • Manages and coordinates customer communication., • Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies • Technical Capacity and Existing Knowledge., • Communication Proficiency., • Problem Solving/Analysis., • Self-Motivated/Initiated., • Financial Acumen, • Conflict Resolution Work Environment This job generally operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, and photocopiers. The employee is occasionally exposed to a variety of extreme conditions at fabrication shops and job sites. Job safety needs to always be considered the top priority. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This is largely a sedentary role; however, some filing is required. This would require the ability to lift files, open filing cabinets and bend or stand as necessary. The employee must occasionally lift or move up to 25 pounds. Expected Hours of Work This is a full-time position. The first shift days and hours of work are Monday through Friday, 8:00 a.m. to 5:00 p.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required except for local travel during the business day. Additionally, some projects may require out-of-state, out-of-country, and overnight travel up to 20%. Required Education and Experience • Experience at an EPC (Engineering, Procurement, and Construction) company, • Bachelor's degree in construction, engineering, or management related discipline, 5 years of experience in industrial project and/or construction management may be substituted for education requirement, • A minimum of 3 years of experience in industrial project and / or construction management, • Proficiency with Microsoft Office suite and enterprise resource planning Preferred Education and Experience • Master’s degree in construction, engineering, or management related discipline, • 5 years’ experience in the power, oil & gas, data center and / or district energy industries, • Certified as a Project Management Professional (PMP) or equivalent. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job DescriptionDescriptionDRMP is seeking a motivated Senior Roadway Project Manager (PE) to help the growing roadway group across North Carolina in both our Raleigh and Charlotte offices. We are looking for a suitable candidate who is knowledgeable in roadway design and able to mentor junior staff. They should also have the necessary skills to market, control and develop projects for the North Carolina Department of Transportation, counties, cities and other transportation agencies. Your Primary Responsibilities will include • Maintain responsibility for multiple roadway projects., • Develop a tailored marketing strategy to promote the roadway discipline in applicable markets, including preparing Letters of Response and Technical Proposals., • Ability to direct and mentor younger staff., • Complete tasks and projects within the established expectations of the supervisor., • Demonstrate leadership qualities in all aspects while continuing to perform at a high level., • Regularly review content quality to ensure the highest standards are met., • Ability to lead internal training programs., • Bachelor’s Degree in Civil Engineering or appropriate equivalent, • 10 - 15+ years of progressively more complex engineering experience., • Experience managing projects for NCDOT and/or municipal clients throughout North Carolina., • Management duties include budgeting, scheduling, job tracking, client interaction, and staff management., • Outstanding communication skills both verbal and written and the ability to forge strong relationships with clients, professionals and your team members., • Excellent compensation package, • Outstanding holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Mentorship Program, • Tuition Reimbursement, • Parental Leave, • Competitive health and dental insurance premiums, • Variety of voluntary benefit options, • Short-Term Disability/Long-Term Disability, • Company-furnished life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreDRMP is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer.

Job DescriptionA Smarter Career Choice Because the internet is now the heartbeat of our homes and an essential tool for business, it should run without interruption or stress. IQ Fiber was created to offer 100% fiber-optic high-speed internet, transparent pricing, and attentive customer service to deliver a Smarter internet experience. As part of our rapidly growing team, your contributions will directly impact our success. Your work matters here. We’re looking for energetic, collaborative, and customer-focused talent with the ability to proactively move our business forward. In return, you’ll find a place where your voice matters. You’ll find a team that works hard and has fun. And, if you’re like us, you’ll know you made a Smarter career choice. This is an in-office position located in Jacksonville, FL. Local candidates only. Multiple shifts available- 1st shift, 2nd shift, 3rd shift, Overnights. Position Summary: The Customer Technical Support Representative provides technical support to our customers regarding their IQ Fiber internet service. In this role you will be troubleshooting customer internet connections and home Wi-Fi. You will also assist customers with new service requests, installation and service questions, and billing status. Our customer support team is a fun, energetic, and resourceful team who enjoy providing the very best customer service via phone, email, and chat while working in our Jacksonville office. Success in this role requires a genuine enthusiasm for technology and a keen interest in assisting customers reach a resolution using problem-solving skills. Essential Duties and Responsibilities: • Exceed customer expectations at every opportunity., • Drive customer satisfaction as the first point of contact for all inbound customer contacts (phone calls, chats, emails)., • Manage customer communications received via multiple sources – phone, email, text, & social sites from potential or existing customers and respond to any questions or concerns., • Process incoming orders for new installation, scheduling with the customer and completing the billing for services rendered., • Complete change of service requests and make updates to accounts per customer requests., • Respond to inquiries on order status, billing questions, service availability, new product offerings, etc., • Provide excellent customer service support including technical troubleshooting of service issues to customers calling in or chatting in for help., • Use problem-solving skills to properly diagnose and resolve technical hardware and software issues involving internet and Wi-Fi connectivity., • Ensure details of the customer interaction are captured by opening trouble tickets where applicable, documenting the interaction, actions taken & details of how issue was resolved., • Utilize our systems and tools to proactively check for and resolve potential issues before marking the contact as complete., • Respond to escalated calls from customers and service techs during installation or service calls., • Make follow-up calls on previously resolved trouble tickets to ensure customer satisfaction., • Ensure that service-impacting events are worked timely to minimize service outages., • Provide customers with updates on the progress of the work orders and/or trouble tickets., • Follow-up with potential customers to convert leads to orders or to finalize orders., • Provide manager with regular updates on common problems encountered and identify possible longer-term solutions/improvements to reduce future problems., • Use communication channels to inform the team of important issues and information which will help improve team performance., • Effectively communicate IQ Fiber’s product and service offering., • Navigate through multiple systems., • A customer-first, troubleshooting mindset with demonstrated ability to provide exceptional internal and external customer care with a strong sense of ownership over results., • 2 years of customer service experience, 1 year in a contact center setting., • 6+ months of experience troubleshooting basic network/Wi-Fi issues, preferred., • Previous telecommunications experience a plus., • Preference for operating in a fast-paced, technical environment with a high degree of critical thinking and problem solving., • Enjoys working with a team, but has ability to work independently, multi-task in a fast-paced environment without supervision and able to achieve individual and team metric results., • Willing to learn, adapt and evolve with the team and company and develop new skills quickly., • Ability to learn and grasp new concepts and work through problems in a logical manner., • Positive attitude with a passion for helping customers and the ability to connect with people., • Commitment to owning customer issues from start to finish., • Excellent customer service skills, including positive phone demeanor., • Strong follow-up skills, accuracy, and attention to detail., • Strong technical aptitude with excellent end-user interaction skills, • Capable of answering technical questions from technical and non-technical users., • Able to listen with solid analytical, problem-solving, and trouble-shooting skills with capability to solve complex problems., • Experience in one or more ticketing, CRM, billing, ordering, scheduling, phone systems; Microsoft Dynamics a plus., • Strong computer skills and the ability to navigate through multiple screens., • Exceptional knowledge of Microsoft Office applications., • Excellent verbal and written communication skills., • Must be able to pass criminal background check., • Flexibility to work mandatory overtime to meet business needs., • High integrity and a strong work ethic are a must., • Attention to detail and ability to think creatively and strategically is a must., • Excellent organization and time management skills., • Ability to interact and communicate effectively with other team members. IQ Fiber is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Powered by JazzHR FkXUDWXdbb

Job Description The Jacksonville Housing Authority is an equal opportunity employer/affirmative action employer. It is the policy and the intent of the Jacksonville Housing Authority to provide equality of opportunity in employment for all persons and in all aspects of its personnel policies, programs, practices, operations, and in all its working conditions and relationships with employees and applicants for employment. Recruitment, hiring, assignment, training, compensation, promotion, retention, and disciplinary decisions will be made without regard to race, color, religion, creed, national origin, sex, sexual orientation, age, disability, genetic information, veteran status, or any other protected class status applicable under local, State of Florida or federal law. POSITION Job Title: Construction Project Manager FLSA Classification: Exempt EEO Classification: Craft Worker Salary/Pay Grade: $60,000.00 - $70,000.00 Reports to: Deputy Director of Modernization & Development Job Description Job Summary Planned, develop, and manage construction projects from start to finish. Prepare specifications, and proposals, solicit and review bids for projects. Conduct field inspections, manage budgets, and coordinate work with existing programs. Ensure compliance with specifications, and federal, state, and local housing codes and guidelines. Essential Job Functions • Manage modernization and construction projects, • Perform field inspections of construction sites to ensure compliance with plans and specifications, • Develop specifications for use in proposal solicitation and contract documents, • Prepare estimates to determine project feasibility and for budget recommendations, • Assist in reviewing bids, evaluating proposals, and selecting contractor, • Review construction plans and drawings by reading and interpreting plans, specifications, codes, and ordinances, • Prepare schedules for the implementation and completion of construction projects, • Develop and write detailed scope of work descriptions for specific construction projects, • Coordinate the approval process for materials and supplies, • Interview workers for earned wages determination, • Monitor contractor payrolls to ensure wage rate compliance, and issue wage decisions from the Department of Labor, as needed, • Review is written and graphic materials such as architectural drawings, building codes, zoning maps, project specifications, utility plans, lead and asbestos reports, topographic maps, electrical drawings, and field reports, • Prepare inspection reports, estimates, the scope of work descriptions, and field reports, • Review, evaluate and approve all requests for payment, • Assist in solving problems at properties by determining causes and designing solutions, • Inspect elevators to ensure compliance with applicable laws, rules, regulations, and codes, • Act as liaison between Authority and HUD regarding labor standard compliance, • Prepare reports as needed Minimum Qualifications Bachelor’s degree in engineering, architecture, construction science, or related field, plus five years of responsible experience in construction work involving local codes, writing specifications, drafting, and interpretation of plans and specifications, or an equivalent combination of education and experience. Familiarity with AIA and HUD standards and formats preferred. Required Knowledge, Skills, and Abilities • Knowledge of HUD’s Uniform Physical Condition Standards (UPCS), • Knowledge of housing and construction inspection procedures and techniques, • Knowledge of HUD’s Modernization Standards, • knowledge of HUD’s and JHA’s Contracting and Procurement Policies and Procedures, • Knowledge of Lead-Based Paint and Asbestos regulations, • Knowledge of the Public Housing Assessment System (PHAS), • Knowledge of local and state building codes including construction, plumbing, electrical, fire, and safety codes and regulations, • Knowledge of the meaning and use of words and terms related to construction and contracts, • Knowledge of architectural design, • Ability to plan, administer and coordinate rehabilitation, modernization, and construction projects, • Ability to use a computer to generate statistical and other reports, • Ability to communicate with residents, contractors, vendors, and other employees, • Ability to prepare statistical, maintenance, and technical inspection reports, • Ability to read and interpret specifications, blueprints, and all inspection procedures and requirements, • Ability to prepare construction cost estimates, • Ability to analyze bid forms, prepare costs estimates and cost analyses Commitment: Sets high standards of performance; pursues aggressive goals and works hard/smart to achieve them; strives for results and successfully conveys a sense of urgency and brings issues to closure and persists despite obstacles and opposition. Customer Service: Meets/exceeds the expectations and requirements of internal and external customers; identifies, understands monitors, and measures the needs of both internal and external customers; talks and acts with customers in mind; and recognizes working colleagues as customers. Effective Communication: Ensures important information is passed to those who need to know; conveys the necessary information clearly and effectively orally or in writing; demonstrates attention to, and conveys an understanding of, the comments and questions of others; and listens effectively. Responsiveness and Accountability: Demonstrates a high level of conscientiousness; holds oneself personally responsible for one's work and does a fair share of work. Teamwork: Balances team and individual responsibilities; exhibits objectivity and openness to others' views; gives and welcomes feedback; contributes to building a positive team spirit; puts success of team above own interests; supports everyone's efforts to succeed; attends, supports, and participates in all team building exercises and events. Adaptable/Flexible Skills: Ability to work additional hours if required and work with pressing deadlines and is task oriented. Proactively seeks work assignments when current assignments are completed—takes initiative. Physical Demands Work is principally active. Special physical demands are required, including the ability to repeatedly lift and pull up to 50 lbs., bend, kneel, climb ladders, and do other strenuous activities. Must have the ability to operate a pickup truck and van safely and legally. Must be able to work in adverse Florida weather conditions which include extreme heat and humidity in the summer and cold in the winter. Much of the work will be done in environments that do not have air conditioning or heating. The work involves normal risks or discomforts associated with a skilled trade position. Other: Must be insurable by JHA’s insurance and possess a valid driver’s license. Position Reports to Leadership Accountability No Supervisory Accountability No Organizational Accountability No Financial Accountability No Customer Accountability Interfaces with customers internally and externally We anticipate hiring at the minimum of the respective pay grade per contractual obligations. We are an EOE & DFWP. The successful applicant will be required to pass a background check including but not limited to employment history, criminal record, and driving record, and may be subject to a pre-employment drug screening. Section 3 candidates preferred. This job description should not be interpreted as all-inclusive. It is intended to identify the major responsibilities and requirements of this job classification. All incumbents may not perform all the job duties listed, some incumbents may perform some duties which are not listed, and incumbents may be requested to perform job-related responsibilities and tasks other than those stated in this description.

Job Description Linder Industrial Machinery Company is recognized as one of the nation's premier heavy equipment dealers providing quality new, used and rental equipment across 27 branch locations in Florida, Georgia, Virginia, South Carolina, and North Carolina. Linder's commitment to delivering superior industrial machinery solutions is shared by our leading equipment partners such as Komatsu, BOMAG, Deutz Fahr, Atlas, Konecranes, Mantsinen, Superior Brooms, Terramac, and many more. Job Summary: Expand Linder’s presence in assigned territory, providing product support to customers, and increase product support revenue. Promote Linder’s “all makes” products and demonstrate by actions that the PSR and Linder are solutions providers. Responsibilities: • Increase Parts and Service Sales opportunities in assigned territory in order to grow revenue, including consumables and commodities, service repairs, and undercarriage, • Prepare and present Parts and Service quotations for customers, • Conduct after-sales visit, • Complete and present Komtrax and Warranty certificates, complete 90 -day revisit, discuss and sign up customers for electronic part ordering, • Acquire customer information to build comprehensive data base to include machine lists, customer contacts, influencers, and Parts and Service purchasers - all information to reside in CRM, • Conduct routine machine visits completing 50-point walk around inspection and present to customers, • Promote current Parts and Service marketing and sales programs to include New, Used , and All Makes opportunities, • Develop and maintain partnerships with internal customers (Service, Parts, and Sales), • Maintain DAILY call reports on CRM, • Develop strong working relationship with mainline salesperson in assigned territory to form a strong supp ort team for customers, • Other tasks as requested by manager Education/Experience/Skills: • Associate degree (AA) or equivalent from two-year college, technical school, or equivalent combination of education and experience, • Proficient computer skills, • Skilled in developing inter-personal relationships, • General knowledge of maintenance, repair, parts department functions, sales, and customer needs, • Mechanical aptitude and experience in heavy equipment industry required, • Excellent verbal and written communication skills Linder Industrial Machinery Company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job Description The VDC (Virtual Design and Construction) Project Manager will be an expert in managing various VDC tasks pivotal to our design and construction projects. This role demands flexibility in working environments, as you will be required to operate either from the office or directly on project sites, aligning with the needs of our design and construction staff. This role is essential in ensuring that design and construction projects leverage technology to optimize planning, design, quality, and execution processes. Duties/Responsibilities: • Oversee VDC tasks on projects from their conceptual stages to construction completion and project turnover., • Coordinate and integrate models and technology for design and construction projects., • Organize, update, and manage construction-related data, ensuring it is accurate and accessible to project stakeholders using BIM tools., • Consistently exercise discretion and judgement while conducting while conducting quality checks and assist in validating models to ensure they meet industry standards and client requirements., • Stay updated on the latest advancements in VDC technology and methodologies, contributing to the continuous improvement of project delivery processes., • Lead and manage BIM data, coordinating between design and construction staff., • Execute precise point locating for construction layout and verification., • Perform and monitor clash detection and resolution amongst all discipline models., • Respond to and fulfill staff requests related to VDC tasks., • Assign tasks to VDC Technicians., • Conduct and facilitate training sessions for VDC related activities and technologies., • Other duties as assignedRequired Skills/Abilities:, • Analytical Skills: Strong analytical and problem-solving abilities to identify and resolve technical issues., • Communication: Good verbal and written communication skills to collaborate effectively with team members and convey technical information clearly., • Detail-Oriented: High attention to detail to ensure precision in model creation and data management., • Excellent organizational and project management skills., • Ability to work effectively in both office and on-site environments., • Strong leadership abilities., • Capacity to train and guide technicians and other team members.Education/Experience:, • Bachelor’s degree in architecture, engineering, construction management, or a related field is typically required., • Minimum of 8 years of proven experience in a VDC role within the construction or design industry., • Strong proficiency in BIM software and tools.Travel Requirements:, • Flexibility to travel on short notice for urgent business needs, to attend meetings, trainings, and events., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures. Physical Requirements:, • Ability to sit, stand, and walk for long periods of time., • Ability to use a computer, phone, printer, scanner, and other office and field equipment., • Visual acuity for detailed work and computer use, • Ability to lift, carry, and move up to 25 pounds of files, documents, equipment, and materials. About Stellar: Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.