Trabajos yard en Seattle, WashingtonCrear alertas

Northwest Container Services (NWCS), is looking to hire a highly motivated, Heavy Equipment Mechanic to work on Terex/Lift Ace container reach stackers, Hyster forklifts, Genie snorkel lifts, chassis, small engines, gen sets at our sites in (1801 Taylor Way Ste A, Tacoma, WA 98421) and (635 S Edmunds St, Seattle, WA 98108). Primary yard will be Tacoma. Pay range is $35.00 - $40.00/HR DOE Schedule is Monday - Friday Shift is 6:00 AM to 2:30 PM with some overtime as needed Safety Sensitive: Yes Position requires Valid Driver's License, eligible motor vehicle report, eligible criminal background report & clean drug panel screening. Responsibilities: • Must have the flexibility to travel to our yard in Portland, Oregon or Boardman, Oregon if needed for support or training., • Performs repairs and assigned preventive maintenance services., • Diagnosis and repair of electrical, hydraulic, engine, transmission, suspension, differential, planetary, wet and air brakes on vehicles and equipment., • Must have basic computer / electronic skills., • Utilize vehicle computer electronic systems and laptop programs for repairs., • Maintain a clean, safe work area in compliance with corporate and OSHA standards., • Maintain a clean shop truck and an organized parts room with adequate inventory for repairs., • Maintain accurate records on equipment, including oil samples, work orders and daily worklog., • Requires strenuous outside physical work, heavy lifting, pushing, or pulling required of objects over 75 pounds., • The ability to communicate the status of repairs on equipment to operations and management., • Work with local vendors and parts suppliers for outside repairs as needed. The ideal candidate possess: • Position REQUIRES Valid Driver’s License and clean driving record., • Position REQUIRES Valid Medical Card to operate a Non-CDL vehicle over 10,000 LBS., • Provide your own tools., • Ability to read, write, comprehend and communicate service and technical information., • Extensive experience working with heavy equipment., • Welding and fabrication skills necessary. What we offer to you: • Medical, Dental, and Vision Benefits, • Uniforms/Safety Gear, • Yearly Boot allowance, • Company phone To be considered for any of our current openings you must complete an application at www.wasteconnections.com. Application information and additional instructions can be found once you select your position of interest. We offer excellent benefits including: medical, dental, vision, flexible spending account, long term & short term disability, life insurance, 401K retirement and unlimited opportunities to "Connect with Your Future". A link to our benefits overview can be found here: https://careers.wasteconnections.com/us/en/benefits Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. Washington State Pay Range for this position is $35.00/HR - $40.00/HR #ACBoost

The Lube Technician is responsible for performing routine preventive maintenance on trucks to ensure optimal performance and minimize downtime. This includes lubricating and conducting basic service checks across various job sites and in a shop environment while adhering to safety and environmental regulations. CalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. • Medical, Dental, Vision, • low-cost premiums even for family coverage, • Company-paid life/AD&D insurance, • Company-paid short-term disability, • Paid sick/vacation/holiday, • 401k/Company Funded Pension Program (program is dependent upon location and job type), • Employee Assistance Program (EAP), • Additional voluntary benefits $25.00 to $35.00 DOE • Lubricate trucks per manufacturer specifications., • Perform daily inspections and routine maintenance checks on assigned trucks., • Maintain accurate records of lubrication and maintenance activities., • Communicate with operators and supervisors regarding vehicle needs or issues., • Ensure compliance with DOT, OSHA, and environmental regulations when handling hazardous materials., • Report deficiencies or safety concerns promptly to the Equipment Manager or Supervisor., • Assist mechanics with servicing as needed., • Move company vehicles around the yard and perform additional maintenance tasks such as checking tire pressure, replacing filters, and inspecting for leaks., • Other duties as assigned High school diploma/GED • Clean driving record and a valid driver’s license required, • Ability to work effectively both independently and as part of a team, • Physical requirements: climbing, stooping, bending, squatting, twisting, pushing, pulling, frequent lifting of 50 pounds, occasional lifting of 75 to 100 pounds with team nsupport, • Stretching, driving/sitting, using pneumatic and power tools, • Follow all safety protocols and procedures, • Willing and able to take direction and learn new skills, • 1-2- Years working with trucks, • Tolerance for outdoor work in varying weather conditions (heat, cold, rain) and indoor shop conditions., • Ability to operate lubrication equipment safely and effectively., • Combination of field-based work requiring daily travel to various job sites and shop-based maintenance tasks., • Flexible hours, including early mornings, evenings, and occasional weekends, depending on project needs. Preferred: • Mechanically inclined, • Eager to learn new skills, • Class B CDL Successful candidate must submit to a post-offer pre-employment physical examination, drug/alcohol screen, background check and clearance from FMCSA if CDL Driver. Some positions require FMCSA regulated ongoing drug and alcohol testing.

Job DescriptionSteel Fabrication company in South Seattle seeks a hardworking, dependable Shop Superintendent. This is not an entry level position. Applicants must have a minimum of 5 years’ experience as a supervisor and or a fitter, not a welder. Our company works exclusively in hot-rolled steel, specializing in structural work. Our scope of work includes structural beams and columns, canopies, stairs, embeds, and handrail.Applicant must possess the following:· The ability to organize project schedules and commitments, optimize production to achieve maximum productivity.· Manage shop employees – Daily tasks, attendance, discipline, advancement, teaching skills· Monitoring employees’ workloads, breaks & lunch breaks.· Safety – Constant assessment, monthly safety meeting with topic and documented. Mitigate safety risks through proper training of staff, maintenance of equipment, and compliance of health/safety codes (OSHA, WISHA and company safety policies).· Reading Memos/Drawings thoroughly and understanding type of work, recognizing what types of procedures/fabrication are required per drawings. Talk to Project manager(s) about what the shop may need to facilitate completing tasks, i.e.: shape cut plates, bevels, outside cutting or processing. • Ability to set up layout on a large scale, direct fitting steel beams and columns with great accuracy· Possess the knowledge to build various types of stairs and handrails, structural steel, & architectural/miscellaneous steel so that you can aid in layout, QC, and the instruction of younger fabricators.· Must have good understanding of erection and shop drawings so that you can find potential issues in fabrication and suggest potential solutions to office/detailers.· Must have a good grasp on D1.1, D1.8, and basic AISC code.· Order consumables, tools, and equipment, Authorize shop purchases, provide receipts & invoices for accounting.· Must know how to properly diagnose issues with welders and wire feeders.· Knowledge of the basic principles of electricity and 3-phase power.· Delegate work to fitters/welders to ensure products are fabricated efficiently, correctly, comply with industry and company quality standards.· Coordinate with project managers to ensure customers receive products in a timely matter.· Need to be able to write thorough weld procedures.· Schedule Outside Q.C. inspections timely, not impact production or shipping requirements.· Must handle issues that arise with/amongst staff in a professional manner., • Understanding of pre-qualified welding procedures., • Proficient with ironworking tools and equipment: oxy-fuel torches, plasma cutter, grinders, bandsaws, ironworker, notchers, presses, drills, taps, pneumatic tools, overhead cranes, rigging, forklifts, etc....· Maintenance of Facility & Equipment, Inventory of Equipment & Tools, Assign personnel for maintenance of bathrooms/yard/bldg.· Recognize when work is getting low and when workload is high and notify office and or move to overtime to avoid missing delivery schedule(s).· Vehicle Maintenance~ work with shipping for maintenance of all vehicles keeping them operational & schedule regular service· Provide insight and communicate to Management for what will help you to do your job better., • Be on site from 6am-2:30pm, 5 days a week., • Have reliable transportation to the Seattle AreaCompensation: $45.50 to $49.00 hour DOE, Medical, Dental and 6 paid holidays and PTO after 60-90 daysEmployment type: Full-TimeThis is a full-time day shift position (at facility in Seattle),M-F 6am-2:30pm, with overtime at time and a half.Compensation is dependent on experience, with a review after a 90-day period.Must be US work eligible and drug free.To apply, please respond to this ad, along with a resume or list of recent work history E04JI800qsf34095ti1

Job Description CEVA Logistics is hiring a CDL A Local Dry Van Driver/Yard Hostler in Seattle, WA. Monday – Friday. This freight is touch and delivered in a safe and efficient manner in accordance with State and Federal DOT regulations and all Transportation Security Administration requirements. Compensation: • Hourly Rate: $30.00 per hour, • OT payed after 40 hours, • Paid via direct deposit weekly Benefits and Perks: • Outstanding benefits starting 1st day of the following month after your date of hire if enrolled within 45 days., • Medical, Prescription Drug, Dental and Vision Insurance, • CEVA pays 70% of the cost of single medical benefits coverage!, • Wellness Programs and Employee Assistance Program (EAP), • Benefits Paid 100% by the Company for Employees:, • Basic Life Insurance, • Accidental Death and Dismemberment (AD&D), • Short-term Disability (STD), • Long-term Disability (LTD), • Employee Assistance Program (EAP), • 401k with company match, 100% on first 3% and 50% on next 2%; eligible after 90 days of hire, • Additional voluntary benefits available for purchase:, • Employee supplemental life insurance, Life insurance for spouse/domestic partner/child, Accidental death and dismemberment insurance, Optional short and long-term disability coverage, Critical illness and hospital indemnity coverage, Identify theft, Legal, • Optional Tax-free Flexible Spending Options:, • Health Care Savings Account (HSA), • Health Care Flexible Spending Account (HCFSA), • Dependent Care Flexibility Spending Account (DCFSA), • CEVA offers 4 weeks of PTO, and it is prorated depending on your hire date, • Paid Orientation, • Safety equipment provided by the company, • Other Perks/Discount Programs:, • Employee discount portal with deals on travel, tickets, auto, health, wellness, food and more, • Just rewards Program allows you to earn and redeem points for gifts Home Time, Route & Schedule • Home Daily, • Shift: 7am to 4:30pm with flexibility, • Schedule: Monday - Friday, • Touch Freight some drop and hook Equipment • Newer fleet with state-of-the-art equipment, full maintenance support, safety features and electronic logs, • Automatic Transmission, • Speed governed at 65 mph, • Inward and outward facing events triggered cameras, • Slip seating Qualifications • Must be at least 21 years of age, • Must have valid CDL A License, • Minimum 6 months of verifiable CDL driving experience, • Must know how to drive a forklift, • Must be flexible to drive Tractor/Yard Mule/Forklift, • Clean motor vehicle record (MVR), • No more than 3 moving violations/traffic citations in the past 3 years, • No more than 2 preventable accidents (chargeable or not) in the last 3 years, • No DUIs/DWIs in the past 5 years, • Must meet Department of Transportation (DOT) testing and physical requirements and be knowledgeable of DOT regulations, • Must be able to pass a required pre-employment drug screen, • Must be able to read, write and speak English, • Hiring Radius: Drivers must live within 45 miles of Seattle, WA or be willing to relocate for this position CEVA Logistics is proud to be an equal opportunity workplace and an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status or any other characteristic. We are an Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individual with Disabilities. CEVA Logistics is an industry leader providing supply chain management solutions and exceptional service to large and medium-size national and multi-national companies. With a genuine culture of recognition, we want our employees to grow, develop and be part of our journey. We are a team in every sense, and we support each other and work collaboratively to achieve our goals together. With multiple divisions, we have opportunities for every driver. So, whether you're looking for local, dedicated, or OTR routes, we have the miles and benefits you need. Join our team today! . This job search is being conducted by Drive My Way (www.drivemyway.com) on behalf of Company.

We are looking for an experienced Food & Beverage Purchasing Manager to join our successful group of restaurants.

Qleen makes it easy for homeowners to automate their chores, from house cleaning to yard maintenance, window cleaning, and pool maintenance.With our fully vetted service providers, super-easy online booking application, and A+ customer service team, Qleen makes it easy for customers to manage their

About USS: United Site Services is the industry leader in comprehensive site services, committed to creating partnerships that help enable our customers’ project and event success. Our deep industry expertise, excellence in process management, and dedication to corporate responsibility are pillars of our value proposition; each supported by tangible, best-practice programs. Our success is fueled by the dedication and collaboration of our diverse team, which includes field technicians, customer care representatives, sales professionals, and functional experts. Each member of our team plays a vital role in ensuring a seamless and reliable experience for our customers. By joining United Site Services, you will be part of an organization that values continuous improvement, teamwork, and excellence in every aspect of our business. Overview: The Equipment Specialist performs routine work in the repair and general maintenance on various pieces of equipment including restrooms, sinks, holding tanks and showers. This is position is also responsible to ensure that the yard is cleaned and organized. Responsibilities: • Check, wash, repair, paint and store toilets, containers and other company materials., • Use steam cleaner and/or pressure washer for cleaning assets (toilets, sinks, etc.), • Keep wash pad area clean and organized., • Check and clean water-recycling system daily., • Inform Supervisor/Manager of material used throughout the day., • Report any problems found on equipment throughout the day to Supervisor., • Completely check and repair units before delivery and upon return., • Conducts general facility maintenance and minor repairs as needed., • Assist with the retrofitting of special or high-end units., • Follow United Site Services safety rules: utilizes protective clothing and equipment, reports safety hazards and incidents to supervisors., • Uses forklift for loading and unloading assets (toilets, sinks, etc.) Qualifications:, • Customer Service, • Teamwork, • Time Management, • Communications, • Decision Making and Problem Solving Physical Requirements:, • Sit while operating equipment (such as a forklift) and stand while servicing products, • Use hands and fingers to handle, control or feel objects tools or controls, • Repeat the same movements, • See details of objects that are less than a few feet away and also at greater distance, • Speak clearly so customers can understand, • Understand the speech of another person, • Hear sounds and recognize the difference between them, • Be able to walk up to 30 minutes at a time without exertion, • Enter and exit equipment by stepping and kneeling, • Lift up to 40lbs from your waist to your shoulders, • Lift 30lbs from the floor to your head, • Crouch and squat, • Push 150lbs and pull 150lbs horizontally Benefit Summary: All full-time employees working an average of 30 hours or more per week are eligible for the following benefits: • Holiday & Paid Time Off (pro-rated for Part-Time employees), • Medical/Pharmacy, • Dental, • Vision, • Employer-Paid Short-Term Disability, • Employer-Paid Employee Basic Life & Accidental Death and Dismemberment, • Voluntary Employee Life & Accidental Death and Dismemberment, • Voluntary Spousal Life, • Voluntary Dependent Life, • Hospital Indemnity, Accident and Critical Illness, • Commuter/Transit Account, • Healthcare Flexible Spending Account, • Dependent Care Flexible Spending Account, • Health Savings Account, • 401(k) with employer match, • Employer-Paid Employee Assistance Program (EAP), • Employee Discounts Salary Range: $18.23 – $24.62 / hour Pay Transparency Statement: At United Site Services, our salary ranges reflect the minimum and maximum base pay for the posted position applicable to all locations across the US. Within the posted salary range, individual pay is determined by the geographic location, job related skills, experience, education, and certifications. Our total compensation package includes base pay plus a comprehensive benefits program. EEO Statement: Some positions may require secure site access and/or domestic air travel. All candidates for positions which require secure site access and/or domestic air travel must possess an acceptable form of identification to comply with state and federal regulations, such as REAL ID-compliant driver’s license or state ID, or U.S. passport. This statement is not intended to require documentation beyond what is acceptable under the federal I-9 form process administered by the U.S. Citizenship and Immigration Services (USCIS); and should not be construed as creating additional employment eligibility verification requirements. United Site Services is an equal opportunity employer. In accordance with applicable law, we prohibit discrimination against any applicant or employee based on any legally-recognized basis, including, but not limited to: race, color, religion, sex (including pregnancy, lactation, childbirth or related medical conditions), sexual orientation , gender identity , age (40 and over), national origin or ancestry, citizenship status, physical or mental disability, genetic information (including testing and characteristics), veteran status, uniformed servicemember status or any other status protected by federal, state or local law. Our commitment to equal opportunity employment applies to all persons involved in our operations and prohibits unlawful discrimination by any employee, including supervisors and co-workers.

Job DescriptionDescription: Working under general supervision, conducts safety inspections and performs preventive maintenance on a variety of vehicles, heavy equipment, stationary machinery, and transfer trailers. This role provides opportunities for training and gaining experience to progress to a higher-level mechanic position. Duties and Responsibilities: • Conducts preventive maintenance and safety inspections on company vehicles, heavy equipment, transfer trailers, and stationary machinery., • Ensures accurate and efficient completion of paperwork or computer database entries regarding maintenance tasks, documenting usage of parts and supplies. Utilizes Asset Essentials to generate repair orders for communication of defects or areas needing attention., • Undertakes minor repairs and cleaning of components as necessary, while also fulfilling other maintenance-related tasks as directed by supervisors or team leads., • Operates forklifts and other yard equipment as needed for job requirements., • Adheres strictly to company standards and policies, as well as DOT safety standards, throughout all work activities. Requirements: Any combination of education and experience that would likely provide the required knowledge, skills and abilities is qualifying. A typical way to qualify is: • Preferably possess one year of experience in preventive maintenance focusing on heavy vehicles., • Previous involvement in the waste and recycling industry is advantageous., • Familiarity with DOT Out-of-Service Criteria, including CHP B.I.T. Inspections and DOT compliance audits, is desirable., • Preferred experience includes working in maintenance facilities or similar settings involving vehicles and processing equipment such as balers, conveyors, hoppers, electric motors, and landfill machinery. Knowledge, Skills, and Abilities: • Ability to work any assigned shift, • Work under pressure, handle stressful situations and maintain flexibility., • Ability to maintain high levels of activity or productivity; operating with effectiveness, and determination over extended periods of time., • Ability to build knowledge and expertise about current job., • Ability to read product information, manuals, work orders and other information necessary for performing essential job functions., • Ability to communicate, orally and in writing, effectively with peers, supervisors and customers. Physical Demands and Work Environment: The physical demands and work environment described below represent the activities and surroundings of the positions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee if regularly required to sit, stand, walk, bend and twist from the waist and knees; use hands to finger, handle or feel; reach with hands and arms; and stoop, kneel, crouch and talk or hear. The employee must be able to lift, push, pull, unload, drag and carry from 10 to 50 pounds. The employee must be able to assist the vendors with physical tasks such as unloading parts. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, color vision and ability to adjust focus. The employee is often exposed to extreme heat and cold weather conditions as well as exposure to dust, noise and fumes found in a shop environment.

Job Description Powered by Service. Driven by People. At Total Rentals, we're more than just an equipment rental company, we're a team of hard-working problem-solvers committed to keeping our customers moving. From construction sites to industrial operations, our crews deliver the gear, the service, and the know-how to get the job done right. We believe in taking care of our team the same way we take care of our customers: with reliability, respect, and pride in every interaction. Future Opportunity Total Rentals has proudly served Snohomish County, King County, and surrounding communities for more than 40 years. As we continue to grow, we want to know who is out there and interested in joining our team. Whether your background is in equipment rentals, customer service, small engine repair, event setup, or operations, we would love to connect. Share your resume and the next time we have a fitting opening, we will reach out. Please note, all team members must demonstrate a commitment to and promotion of a diverse and inclusive work environment, as well as a commitment to a safe and injury free workplace through their own actions and mentoring others. All job offers are contingent upon the successful completion of a pre employment background check and drug screen. Why you will love working at Total Rentals Total Rentals is proud of the services and rental equipment we supply to contractors, homeowners, DIYers, and event planners. For more than four decades, our team has helped our community get their projects done the right way, from major construction equipment to wedding stages, dance floors, canopies, tables and chairs, to small engine repairs and equipment service. • Build Security. Total Rentals is one hundred percent employee owned. When everyone has a stake in the business, you will find a motivated, customer focused team that supports one another and works toward shared goals. Becoming an employee owner is simple. Join the team and watch your retirement savings grow., • Build Your Career. We are committed to helping our people grow. Whether you are learning small engine repair, mastering customer service at the counter, becoming a driver, or developing skills in operations, we support professional and personal growth at every level., • Build Community. Total Rentals is a local business serving local people. From homeowners tackling a backyard project to contractors on large jobs, your work directly supports the community we have been proud to serve since 1981. Why you will love Total Rentals benefits We believe Employee Ownership, a competitive wage, and a positive team environment matter, and so do great benefits. Total Rentals offers: • Medical insurance, • Dental insurance, • Vision insurance, • Employee Stock Ownership Plan (ESOP), • 401(k), • Paid time off (PTO), • Paid holidays All benefits are dependent on start date and may be prorated for mid year hires. Types of roles we hire for We are always interested in meeting people with experience or interest in: • Inside Counter Sales and Customer Service, • Small Engine Mechanics, • CDL and Non CDL Drivers, • Equipment Setup and Event Support, • Rental Yard Associates We also hire for operations and administrative roles such as: • Bookkeeper, • Outside Sales, • Fleet Manager, • Purchaser, • And more! If you would like to be considered for future openings, please apply here or email your resume to recruiting@totalrentals.com Total Rentals Commitment to Diversity: Our EEOC Pledge Total Rentals is dedicated to fostering a diverse and inclusive community within our company, industry, and the communities we serve. We believe innovation grows through a collective blend of backgrounds, experiences, and perspectives. No employee or applicant will face discrimination or harassment based on race, color, ancestry, national origin, religion, age, gender, marital or domestic partner status, sexual orientation, gender identity or expression, disability status, or veteran status. We are committed to creating an environment where everyone excels. Notice to Staffing Agencies No agency emails, calls, or solicitations are accepted without a valid agreement. At this time, there are no agency agreements in place, no budget for agency referrals, and no intention to enter one. No Total Rentals employee is authorized to bind the company to any agreement regarding placement of candidates by an agency. Please remove Total Rentals from all solicitation lists. Salary offers are typically made between the entry and midpoint of the range and are based on factors such as experience, education, and internal equity. Pay Transparency $1—$100,000 USD Background Check & Pre-Employment Screening All offers of employment are contingent upon successful completion of a pre-employment background check and drug screening. Background checks may include verification of employment history, education, criminal records, and references. For positions with access to company financial accounts or credit card programs, a credit history check may also be conducted. All screening is conducted in compliance with the Fair Credit Reporting Act (FCRA) and applicable state and local laws. Candidates will be asked to provide written consent prior to any screening. If results include information that may affect a hiring decision, candidates will have the opportunity to review and respond to the findings before a final decision is made. Total Rentals is an equal opportunity employer. Background check results are evaluated in context and do not automatically disqualify applicants. Total Rentals' Commitment: Equal Opportunity for All At Total Rentals, we believe great service starts with great people. We're committed to creating an inclusive, respectful workplace where every employee has the opportunity to contribute and grow. We do not discriminate based on race, color, national origin, religion, age, gender identity, sexual orientation, disability, veteran status, or any other protected class. Staffing Agency Policy Please note: Total Rentals does not accept unsolicited resumes or outreach from staffing agencies. Our internal hiring team manages all recruitment, and no individual at Total Rentals is authorized to enter into third-party agreements without prior written approval

Dunn Lumber is now hiring entry-level positions at $21.No previous work experience is required; full-time employees are eligible for the following benefits.K) PLAN WITH FINANCIAL PLANNING:.Company-sponsored 401(k) plan with a 25% match (up to 15% of employee income,) and free annual financial planni

A successful Yard Worker at Dunn Lumber is expected to learn and grow their ability to perform the essential duties and responsibilities needed to uphold a safe, clean, accurate, and hospitable environment as material flows in and out of our yards. This happens with the completion of all expected op

Yard Worker & Forklift Operator.South Seattle - Tukwila, WA 98178 Start Date 05/14/2026.Hourly Level Experienced Position Type Full Time Job Shift Day Education Level High School/ GED Travel Percentage None.At Mutual Materials, we've been Building Beauty That Lasts for 125 years, and we're looking f

Alongside your core warehouse responsibilities, you'll also support Yard Driver tasks about 10% of the timeassisting with the movement of trailers within the facility and to our local stores helping to keep the yard organized and operating smoothly. Yard Driver Responsibilities (Approximately 10% of

Yard Worker & Forklift Operator.South Seattle - Tukwila, WA 98178 Start Date 05/14/2026.Hourly Level Experienced Position Type Full Time Job Shift Day Education Level High School/ GED Travel Percentage None.At Mutual Materials, we've been Building Beauty That Lasts for 125 years, and we're looking f

You will quarterback complex sales cycles, navigate multi-stakeholder buying groups, partner deeply with prospects to understand their operational challenges, and position Conduit as the modern platform for dock and yard efficiency. Run tailored product demonstrations that clearly articulate Conduit

Identify buildings at risk based on yard constraints and determine short term and long term solutions to solve. Determine and gain alignment with TOM and site ops leadership on yard specific capacity.

Job DescriptionJoin Our Team at R-2 Contractors! Since 2009, R-2 Contractors has been a trusted leader in Civil & Underground construction, specializing in power infrastructure projects nationwide. From renewable energy to major utility work, we deliver expert excavation, grading, trenching, and foundation services that keep communities connected and moving forward. What truly sets us apart is our culture. At R-2, we’re a team of people who are hungry to take on challenging projects, humble enough to learn, grow, and collaborate, and smart in how we plan, build, and solve problems. We believe in showing up for each other, doing things the right way, and owning every aspect of our work. If you take pride in precision, thrive in tough conditions, and live by “Pride, Grit, & Own It!,” you’ll fit right in! We’re building more than infrastructure—we’re building a team that pushes limits and stands behind every job we do. GPS Grade Checker / Machine Control Specialist Heavy Civil – Substation & Power Infrastructure Projects Location: Project-Based (Travel Required)Position Overview We are seeking an experienced GPS Grade Checker / Machine Control Specialist to support heavy civil substation and power infrastructure projects. This role is responsible for GPS layout, machine control setup, data management, modeling adjustments, hardware troubleshooting, and grade verification in a high-production environment. This position plays a critical role in ensuring trenching, duct banks, grounding systems, equipment foundations, and mass excavation are built accurately and pass inspection the first time.Key Responsibilities GPS & Field Operations • Operate data collectors and rover units, • Perform localization and verify project control, • Establish temporary and permanent base stations, • Verify control points and benchmarks, • Perform pre-construction and daily layout/stakeout, • Complete as-built data acquisition and reporting, • Maintain thorough QA/QC documentationMachine Control & Heavy Equipment, • Operate heavy equipment equipped with GPS systems (dozers, excavators, graders, etc.), • Setup, calibrate, and verify GPS machine control systems, • Build and adjust surfaces, points, and linework in the field, • Manage project files between field units and machines, • Install, troubleshoot, and repair sensors, antennas, cables, and hardware, • Support operators in real-time productionSubstation & Power Infrastructure Support, • Layout and verify power duct banks and conduit runs, • Confirm trench depth, bedding grades, and grounding grid elevations, • Verify equipment pad and foundation elevations, • Monitor yard cut/fill and drainage slopes, • Ensure compliance with civil and electrical drawingsModeling & Data Management, • Read and interpret civil, structural, and electrical blueprints, • Utilize Civil 3D, Carlson, Magnet, Bentley, or similar platforms, • Perform quantity takeoffs, • Manage data from project inception through closeout, • Resolve field model discrepancies and make real-time corrections, • Understand datums, projections, and units of measurementHardware & Technical Troubleshooting, • Diagnose and repair GPS rovers and data collectors, • Update firmware and software, • Troubleshoot networking and localization issues, • Maintain machine-mounted GPS systemsHardware familiarity may include: Trimble, Topcon, John Deere Integrated GPS, Total Stations, Laser systems, Theodolites, and Builder’s Levels.Top Outcomes, • Accurate grade control with zero rework, • Reliable machine control performance, • Clean, inspection-ready documentation, • Real-time model corrections that protect schedule, • Full understanding of daily site GPS processesQualifications, • 3+ years heavy civil GPS or survey experience (substation/power preferred), • Experience operating GPS-equipped heavy equipment, • Strong machine control background, • Experience with mass excavation, duct banks, and structural foundations, • Proficiency in modeling and takeoff software, • Strong math, elevation calculation, and problem-solving skills, • Mechanically inclined with the ability to troubleshoot hardwareWork Environment & Physical Requirements, • Outdoor heavy civil construction sites, • Substations, renewable energy, and power infrastructure projects, • Ability to work long hours, overtime, and travel, • Stand for extended periods and navigate uneven terrain, • Lift and maintain GPS and related equipment Ready to Join Our Team? If you're ready to bring your expertise and passion for construction to a growing company, apply today and be part of a team that values quality, integrity, and precision in every project! R-2 Contractors is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status Powered by JazzHR 0iAeWPqf3h

Job Description Seeking a Senior Project Manager with marine/ship yard experience for a direct hire opportunity with our client in Honolulu, HI. This position requires relocation to Hawaii - relocation assistance is provided! Salary is between$125K - $150K per year (based on experience) + benefits! The Project Manager will report to the Vice President of Programs and is responsible for the management and execution of commercial and military ship repair contracts ranging from $1M and up to $100M in value. Responsibilities: • Serve as the primary focal point for customer interaction and overall management of ship repair contracts, • Establish and maintain strong working relationships with key stakeholders, including owners, managers, estimators, engineers, subcontractors, supervisors, and production teams, • Act as a key communicator and leader across all project stakeholders, • Manage and execute government contracts, ensuring compliance with contractual requirements, • Apply estimating methods to support project planning and execution, • Develop, manage, and maintain project schedules and work sequencing, • Supervise and provide direction to project management staff, • Coordinate and implement contract changes to ensure timely execution and completion, • Negotiate contract modifications and changes with customers, • Interface daily with vessel stakeholders to resolve operational and project execution issues, • Leverage onboard ship experience and knowledge of marine engineering and shipboard systems/equipment, • Interpret complex technical documents, including specifications, NAVSEA Standard Items, drawings, blueprints, manuals, and test procedures, • Apply project management principles, including risk management, performance tracking, and change management, • Coordinate and schedule resources including labor, materials, equipment, and subcontractors, • Lead daily and weekly meetings across all stakeholder levels, including production meetings, progress reviews, conferences, and formal customer updates, • Interface with executive leadership and customers to ensure alignment on project status and execution Qualifications: • Bachelor of Science in Engineering or related field, or equivalent work experience, • Minimum 10 years of ship repair or marine industry experience, • Minimum 5 years of project management experience, • Experience managing federal/government contracts, • Knowledge of shipboard tag-out procedures and Navy Work Authorization (WAF) controls, • Experience or training in work sequencing and project scheduling, • Strong written and verbal communication skills, • Proficient in Microsoft Word, Excel, and Microsoft Project (or similar scheduling tools), • Must be legally authorized to work in the United States; U.S. citizenship required for security clearance and base access, • Ability to obtain Transportation Worker Identification Credential (TWIC) and Defense Biometric Identification System (DBIDS) credential, • Ability to pass post-offer drug screening and background check, • Valid State of Hawaii REAL ID-compliant driver’s license in good standing, or valid U.S. passport plus Hawaii driver’s license (if REAL ID is not held) If you are interested in learning more about this role, please submit your resume for immediate consideration! INDH Powered by JazzHR 5CMVhdCad7

Job DescriptionCompany Description Charlie’s Produce - Who We Are Charlie's Produce is a privately owned wholesale produce company. We are the largest privately owned produce wholesaler on the West Coast, and we are growing. The secret to our success in this industry is PEOPLE! We strive to hire the best and we reward them with a working environment that fosters loyalty, stability, innovation, and growth. Charlie’s was founded in quality, and we are proud that it is still our focus. With a team of dedicated people who are passionate about food, supply chain, and their community we are looking for like-minded individuals to help further our goal to enhance our communities through quality produce. What we offer: • An amazing company culture!, • Medical/Dental/Vision on the first of the month following hire., • ESOP (Profit Sharing) and 401(k)., • Paid vacations, paid holidays., • Pre-tax commuter benefits, and onsite parking., • Coverage under State Sick Leave., • 100% Prepaid College Tuition for employees and their dependents., • Employee assistance program (EAP). Additional Compensation Details: • $35.00/hr - $50.00/hr pay rate, • Potential 90-day performance-based raise, • Yearly review with possibility of increase based on performance and tenureJob Description Schedule 8:00am - 4:30pm Monday - Friday, five 8 hour shifts a week Tuesday - Saturday, five 8 hour shifts a week The Role If you enjoy working with a great group of professionals, thrive in a fast-paced environment, and enjoy using your organizational skills, then we have a role for you! Charlies Produce is looking to add an experienced Fleet Mechanic to join their team in South Seattle. We are looking for a professional person who is attentive to details such as being to work on time, a team player, and willing to work hard. A Journeyman Mechanic is a certified, highly skilled professional who independently diagnoses, repairs, and maintains complex automotive or industrial equipment. They perform advanced engine work, system repairs (hydraulics, electrical), and preventive maintenance, often supervising apprentices. Qualifications include completing an apprenticeship program, passing certification exams, and having extensive hands-on experience Essential Responsibilities and Duties Include, but Are Not Limited To: • Preventative maintenance / Diagnosing, troubleshoot repair mechanical, electrical and computer systems on vehicles or machinery., • Running repairs on a variety of equipment from Tractors, Trailers, Lit gates, Reefers and Yard goats., • System Overall, rebuild engines, transmissions, and components, and maintain hydraulic or pneumatic systems., • Conduct routine maintenance and inspections to ensure vehicle safety and performance., • Utilizes vehicle computer electronics systems to interpret failure modes to initiate and complete repairs., • R&R Truck components including Engine, transmissions, axles, brakes, lift gates, etc.., • Engine / Transmission diagnose A/C repair Electrical -- charging / starting / lighting / suspension and Steering repair, • Perform diagnostics and repairs on heavy diesel engines, machines and related systems, including Lift gate hydraulics and transmissions., • Utilize hand tools and diagnostic equipment to troubleshoot mechanical issues., • Maintain accurate records of repairs and services performed., • Work on and maintain Refrigeration trailers and Box trucks., • Completes required paperwork associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Safety & Compliance, adhere to all safety protocols (LOTO), environment regulations, & hazardous waste disposal guidelines., • Supervision & training, guide and train apprentices & junior mechanics, inspecting their quality of work. Qualifications Required Skills and Experience • Must have at least 5 years of previous truck diagnosis of diesel mechanic experience on Class 8 vehicles preferred knowledge freightliner Isuzu & Hino, • Knowledgeable in the diagnosis and repair of all makes of electronic controlled diesel engines. Fleet experience is a must., • Must have mechanical and diagnostic knowledge and/or experience in diesel engines, liftgates and refrigeration units, • Must have basic welding skills and knowledge of TIG, MIG and stick welding., • Must have ability to read, write, and speak English fluently., • Ability to read/follow technical manuals & verbal instructions alike., • Comfortable with the use of factory scan tools., • Have a professional mechanics toolbox., • High School Diploma or equivalent., • Valid Driver’s License. Preferred Skills and Experience • Cummins and Detroit Certifications., • Reefer maintenance experience., • Class A is a plus, Class B preferred. Additional Information All your information will be kept confidential according to EEO guidelines. This is a safety-sensitive position. This employer participates in E-Verify and will provide the Social Security Administration and if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. We do not provide H1-B sponsorships at this time. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Actual compensation will be dependent on factors, including but not limited to, the individual’s qualifications, experience, knowledge, skills, and abilities as well as physical work location within the state. For additional protected privacy information please visit: Privacy Policy | Charlie's Produce (charliesproduce.com) Charlie's Produce is an Equal Opportunity Employer Visit our Employment Page for more details or to view our privacy center: https://www.charliesproduce.com/careers/ Recruiters - DO NOT CONTACT!

Job DescriptionDescription: Overview The Marine Outfitter role involves the hands-on installation and repair of essential marine systems, covering mechanical, hydraulic, and basic electrical work. You will provide critical support in our service yard by diagnosing technical issues and executing repairs that meet stringent maritime regulations. Job Description Key Responsibilities · Troubleshooting, maintaining, and repairing complex marine systems, including propulsion (inboard/outboard), pressurized freshwater, and hydraulic steering/trim components. · Installing and servicing 12V/24V DC and 120V AC electrical systems, including battery banks, bilge pumps, and integrated navigation/communication electronics. · Executing scheduled service intervals such as oil and filter changes, cooling system flushes, and comprehensive winterization/summarization protocols. · Mounting and aligning engines, installing through-hull fittings, and configuring fuel delivery systems while strictly adhering to ABYC and manufacturer safety standards. · Maintaining accurate records of labor and parts utilized and providing technical feedback to service advisors to ensure customers are updated on repair progress. · Other duties as assigned. Required · 2-5 years hands-on experience with boats, marine engines (outboard, inboard, stern drive, etc.), marine systems (fuel, water, exhaust, electrical, plumbing), or previous outfitting / boat-building work. · Ability to read technical drawings, hull plans, wiring diagrams, mechanical schematics and execute installation accurately. · Physical ability to perform labor-intensive work: lifting and moving heavy parts/engines, bending, kneeling, confined-space work, working on docks or in boat-building sheds, sometimes in harsh or slippery conditions. · Mechanical aptitude, problem-solving skills, attention to detail, and ability to follow specifications precisely. · Drivers license required Preferred · Prior experience working in a marine-outfitting shop, boatyard, boat-building facility, or similar setting. · Familiarity with marine safety, fuel/exhaust/water/waste systems, marine wiring/electrical standards, and marine hardware installation guidelines. · Basic knowledge of marine surveys, sea-trial procedures, system testing, or maintenance inspections. · Comfortable working on multiple hull types (fiberglass, aluminum, wood) and adapting techniques accordingly. Physical Requirements · Physical ability to perform demanding work: lifting heavy parts, working in confined spaces, bending/crawling, and sometimes working onboard vessels (dockside or at sea). · Ability to climb stairs or ladders to access vessels. · Ability to stand, walk, or sit for extended periods. · Ability to lift up to 50 lbs. · Comfortable working in all types of weather conditions. Working Hours & Compensation · Full-time position; Monday – Friday 8:00am – 4:30pm · Compensation to be determined based on experience and skill level. · Benefits: Medical (PPO or HSA available), Dental, Vision, Life, 401(k), Sick, PTO Requirements:

Job DescriptionDescription: Driver – Portable Sanitation Join Honey Bucket, a division of Northwest Cascade, and be part of an employee-owned company excelling in portable restrooms, hand-washing stations, fencing, and storage containers. Home of over 750 employees in seven states, we offer driven individuals opportunities to earn more than just a paycheck! A "Day in the Life": • Efficiently, energetically and independently, our drivers ensure the quality standards that make us stand out from our competition by:, • Promptly arriving at yard to pickup truck and supplies, • Service and clean portable restrooms (˜50% driving, ˜50% servicing), • Communicate with dispatchers and customers, • Expect 10+ hour days, with OT and weekends during busy seasons, • Physically demanding: lifting, reaching, bending We Offer: • Full-time, year-round work with OT opportunities, • Weekly Starting pay: $25.00/hour, $30.00/hour after 1 year (performance-based), • Schedule: 5:00 AM Monday-Friday (some weekends), • Union Teamsters - Employer-paid medical, vision, and dental, discounted for family, • Paid time-off, • Union Pension, • On-the-job training and tuition reimbursement Requirements: • Must be comfortable working from the following locations: Seattle (primary) AND Pacific (Secondary)., • 1+ years in a physically demanding role, • Clean driving record & pass DOT., • Safety sensitive position - Subject to pre-employment and random drug screening, including THC., • Lift 50-150 pounds repeatedly Training: Company-paid one-week training at Conroe, TX or Puyallup, WA ("Honey Bucket University") Equal Opportunity Employer Opportunities are equal for all people through hard work and achievement. Our sense of pride, passion, and belonging unites us in our commitment to doing tough jobs for our customers. We value diverse perspectives and backgrounds and believe they create a strong and innovative workforce that delivers outstanding results. We are an equal opportunity employer. All applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, genetic information, or any other protected class.

Job Description Biltright was founded with three characteristics in mind: Quality work, integrity, and superior customer service. We are only as strong as the team of individuals that make up our staff. With that in mind, we strive to build up our business with quality employees and procedures to bring our customers superior service in an industry known for sub-par construction experiences. From our office staff to our construction team, our goal is to bring about desired results in a professional and seamless manner regardless of the project size. From large commercial projects to the smallest residential yard, we do it right here at BILTRIGHT TURF. Job Summary Biltright Turf is excited to add to their team. The Field Sales Representative’s primary purpose is to assist our customers and their project needs to generate sales for the business. Advanced communication skills, customer service outreach, with a passion for sales and attention to details. In this position you will be responsible for generating leads, building relationships with clients, taking photos and measurements, designing, and closing sales. Requirements • Cheerful outlook and a willingness to adhere to our Core Values, • Excellent communication, • Ability to work independently, as well as with a team, • Strong organizational skills., • Proficient with the use of computers, tablets, and when using new apps and software., • Valid drivers’ license and an insured vehicle in good working order for home and commercial visits to meet with clients Compensation • $40,000- $200,000/ Annually (Base plus Commission), • $1000 car allowance/ Monthly, • $50 phone allowance/ Monthly, • 80 PTO hours accrued annually, • Paid reserved Holidays, • Benefits: Health/Vision/Dental along with 401k options Flexible schedule, remote when not in the field Powered by JazzHR XaACNaRLMW

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Company DescriptionDelivery Driver Pay Range: $21.Tips and Mileage ReimbursementJob DescriptionCompany Description JPC LLC is a Franchise with Domino's Pizza looking to provide opportunity to new team members who are looking for the FUN job.Develop skills and grow fast within our organization.The op

FedEx - - Responsibilities: Operate equipment for movement of packages and documents in a safe and efficient manner; Assist in buildup and breakdown of pallets containing heavyweight freight; Serve as liaison with ULD repair vendor as required; Perform other duties as assigned; Maintain ability to

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Aerotek - - Responsibilities: Perform daily shipping and receiving activities, including preparing, labeling, and processing outgoing and incoming small parcel shipments; Handle materials safely and efficiently throughout the warehouse, including picking, packing, and staging products for shipment;

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Purpose: As a warehouse associate at Floor & Decor, you are the backbone of our retail location.Your key responsibilities will be compiling orders and replenishing and moving merchandise, whether it be on the sales floor or to a customer’s vehicle.Your day will be spent checking inventory and orde

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Cintas Corporation - - Responsibilities: Load and unload customer garments and bulk products into industrial washers and dryers; Set appropriate wash and dry parameters based on product type; Coordinate transfers between washers and dryers; Monitor the proper functioning of washroom equipment; Main

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Catering Delivery Drivers Needed!/h2pCatering deliveries will be completed within 10 miles of Redmond.Live, dedicated driver support is available to help when you need it, via chat or phone.Choose your deliveries in advance.Zifty deposits earnings into your bank up to 3x per week automatically.Role

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Domino's Delivery Driver - Sea Tac, WA.SeaTac, Washington, JPC SOUTH LLC.Company Description JPC LLC is a Franchise with Domino's Pizza looking to provide opportunity to new team members who are looking for the FUN job.Develop skills and grow fast within our organization.The opportunities are limitl

Delivery Driver - Frank's Produce.Frank's Produce is a subsidiary of Charlie's Produce.Frank's delivers quality produce to a wide array of customers in the Seattle area, and occupies a booth at the historical Pike Place Market.Charlie's Produce - Who We Are.Charlie's Produce is a privately owned who

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Delivery Driver Pay Range: $21.Company Description JPC LLC is a Franchise with Domino's Pizza looking to provide opportunity to new team members who are looking for the FUN job.Develop skills and grow fast within our organization.The opportunities are limitless with Domino's!.About The Job Do you kn

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Domino's Delivery Driver - Kirkland.Delivery Expert Pay Range: $17.Tips and Mileage Reimbursement.Come check us out! Domino's Pizza here in beautiful Kirkland!.Do you know why Domino's Pizza hires so many drivers? Well, aside from the fact that our delicious pizza is the perfect solution for dinner

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

Tips and Mileage Reimbursement.Seattle, Washington, JPC SEATTLE LLC.Company Description: JPC LLC is a Franchise with Domino's Pizza looking to provide opportunity to new team members who are looking for the FUN job.Develop skills and grow fast within our organization.The opportunities are limitless

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives you th

If you like working with a fun team, love our queso, have a great personality & enjoy interacting with customers, then come talk to us about joining the QDOBA family! QDOBA is now hiring positive, hospitality-oriented individuals!.As our catering delivery driver you will be the face of QDOBA represe