Trabajos good salary en LutonCrear alertas

Salary: £28,000 - £39,520 Location: Stannard School, Dunstable Contract: Full-Time, Term Time Only Start Date: September 2026 Stannard School is located in the historic market town of Dunstable, approximately 2 miles from the M1, and offers a safe and supportive environment for pupils from 5 to 18 years old as part of the Polaris Community. We have been passionately improving the lives of young people for over 30 years. We have a number of SEN schools across the UK that work together to provide each pupil with a tailored, diverse and appropriate education in a safe, supportive environment that promotes engagement, inspires learning and encourages achievement. We are also incredibly proud that 100% of our education services have been rated as Good or Outstanding by Ofsted. Are you a dedicated and experienced Teacher with a passion for special educational needs? Do you have a proven track record of creating inclusive and engaging learning environments? If so, this may be the perfect opportunity for you. We are seeking a dynamic individual to join our supportive and nurturing team, working together to achieve the very best outcomes for its pupils and help make a real difference to their lives. The successful candidate will be responsible for teaching all allocated areas of the primary curriculum to a small bespoke class group of up to 6 pupils, with the support of a Teaching Assistant. You will be required to plan, prepare and present lessons that cater for the needs of the entire ability range. You will be required to: • Motivate pupils through enthusiastic, imaginative presentation, • Work collaboratively with colleagues, parents and other professionals to ensure a high standard of education, • Monitor and assess pupils' progress, providing regular feedback to pupils, parents and colleagues, • Use a variety of teaching strategies and resources to promote pupil engagement and learning, • Create and maintain a safe and stimulating learning environment for all pupils, • Ensure all school policies and procedures are adhered to in line with the school values, • Qualified Teacher Status or equivalent, • Successful SEN teaching experience, • A good knowledge of the National Curriculum We are an equal opportunities employer and positively encourage applications from suitably qualified and eligible candidates. We are committed to safeguarding and promoting the welfare of children, young people and vulnerable adults and expect all staff to share this commitment. PandoLogic. Category:Education, Keywords:Special Education Teacher, Location:Dunstable, ENG-LU5 5HB

Senior BI Developer - Dunstable - (Remote) A Senior BI Developer with excellent PowerBI, MS Fabric and ERP experience is required to join an international medical company. The Senior BI Developer will be responsible for gathering and transforming business requirements into BI solutions. The Senior BI Developer will lead the development on in MS Fabric lakehouse architectures, designing and implementing PowerBI Solutions and being the key escalation point for all BI Development queries. Skills Required • 5+ years experience in BI Development, • Excellent experience with ERP systems (Infor M3, SAP, Netsuite, Sage etc.), • Proficient working with PowerBI. MS Fabric, Azure and SQL, • Good experience with python, Azure DevOps and ETL/ELT pipelines, • A degree in Computer Science or similar, • Experience delivering BI solutions on a global scale is hugely beneficial This is a remote working position, but you will be required to travel to travel to the Dunstable office when required to. Key Responsibilities • Architect, develop, and maintain Power BI dashboards, datasets, and advanced data models, • Be the key point of contact for all PowerBI, MS Fabric, SQL and other BI Development issues, • Mentor and train junior BI Developers in best practices and methodologies, • Lead ETL/ELT development within a modern cloud-based data platform, • Build and optimise data pipelines across ingestion, transformation, and modelling layers, • Ensure data quality, governance, and performance across BI solutions, • Collaborate with cross-functional teams on UK and international projects Benefits: • 23 days annual leave + Bank Holidays (rising with service), • Life assurance 4 x annual salary, • Contributory pension scheme, • Onsite gym, • Long service awards, • Eye care vouchers, • Cycle to work scheme, • Buy & Sell holiday scheme The client is looking to pay a starting salary of up to £75k, depending on experience. This is a fantastic opportunity for someone who thrives in a fast-moving, mission-driven environment and wants to work with cutting-edge Microsoft technologies. Interested? Apply now by sending your CV to peter . hutchins @ circlerecruitment . com The role is commutable from Dunstable, Houghton Regis, Luton, Aylesbury, Hitchin, Bedford and Letchworth Garden City Circle Recruitment is acting as an Employment Agency in relation to this vacancy. Earn yourself a referral bonus if you refer somebody else who fills the role! We also offer an iPad if you refer a new client to us and we recruit for them. Follow us on Facebook - Circle Recruitment , Twitter - @Circle_Rec and LinkedIn - Circle Recruitment.

Quality Control Lead Location: Bedfordshire Salary: Up to £50,000 Hours: Full-time, Monday to Friday I’m working with a growing product-based business looking to hire a Quality Control Lead into a newly important role at the centre of quality, regulatory compliance and technical governance. This is a good fit for someone who enjoys bringing structure to areas that matter. The role will suit a detail-focused person who can manage day-to-day compliance activity, improve quality processes, work across suppliers and internal teams, and make sure product-related documentation is accurate, complete and audit-ready. It is not a laboratory-style quality role, and it is not purely administrative either. It sits in that middle ground between technical compliance, product quality, process improvement and commercial practicality. The role You’ll take ownership of product compliance and quality activity across a broad technical product range, helping ensure products are supported by the right documentation, validation, controls and governance. You’ll be involved in things like: • Managing product compliance records, technical documentation and declarations, • Coordinating and improving internal quality control and product checking processes, • Supporting product approval and validation activity for new and existing lines, • Investigating non-conformances, product issues and returns, and helping drive corrective action, • Working with suppliers to obtain, review and maintain compliance information, • Monitoring changes in relevant legislation and assessing impact on the product range, • Completing customer compliance requests, supplier questionnaires and pre-qualification submissions, • Supporting audit preparation and maintaining a strong level of documentation readiness, • Improving systems, reporting and data management around quality and compliance, • Building clearer processes for tracking risk, documentation and supplier status They’re open on exact background, but this is likely to suit someone from a manufacturing, engineering, or industrial environment. You’ll probably have experience in several of the following areas: • Product compliance, • Quality assurance or quality control, • Technical documentation and governance, • Supplier compliance, • Product validation or technical approvals, • Regulatory compliance within a product-based business Key experience Ideal candidates will have: • Experience in a quality, compliance or technical governance role within a product-led business, • A working knowledge of product-related regulatory and environmental compliance requirements, • Confidence dealing with technical files, declarations, certifications and supporting records, • Experience investigating issues, spotting gaps and tightening process, • The ability to work across suppliers, operations, commercial teams and product stakeholders This is one of those roles where you can make a visible difference quite quickly. The business needs somebody who can bring shape and accountability to an area that has grown in importance. So rather than just maintaining a well-established machine, you’ll have the chance to improve how things are done, introduce better structure, and become the go-to person for product quality and compliance matters. Package • Salary up to £50,000, • Full-time, Monday to Friday, • Long-term opportunity in a growing business

Building Physics Consultant - Energy Modelling (TAS) Location: LutonSalary: £35,000 - £45,000 Working Pattern: Hybrid (3 days office / 2 days remote) The Opportunity We're working with a respected building services consultancy that is continuing to grow its sustainability and building physics offering. They are now looking to appoint a Building Physics Consultant to support the delivery of energy modelling and performance-led design across a broad portfolio of projects. This role offers the chance to be involved in schemes spanning healthcare, education, residential, and commercial sectors, with a strong emphasis on sustainable, low-energy design. What's on offer • Salary between £35,000 - £45,000, with flexibility depending on experience, • Hybrid working model offering a balanced split between office and home, • Involvement in a wide range of engaging projects across multiple sectors, • Strong focus on professional development, with excellent long-term career progression opportunities, • Opportunity to join a growing consultancy that is expanding its capabilities into wider sustainability areas, including ESG, • Supportive, collaborative team environment within a well-respected business, • Exposure to innovative technologies and forward-thinking sustainable design approachesWhat You'll Be Doing, • Deliver dynamic thermal and energy modelling using TAS, • Support compliance with UK Building Regulations (Part L), • Contribute to building performance analysis and design optimisation, • Work alongside design teams to improve energy efficiency and occupant comfort, • Assist with BREEAM assessments, particularly around thermal comfort, • Produce clear, concise technical reports and modelling outputs, • Engage in project discussions, offering insight into building performanceWhat We're Looking For, • 2+ years' experience in building physics or energy modelling, • Strong working knowledge of TAS (or similar tools), • Understanding of Part L and UK compliance requirements, • Familiarity with BREEAM (especially thermal comfort criteria), • A relevant degree (e.g. Building Services, Environmental Engineering), • Good communication skills and a collaborative approachWhy Consider This Role?, • Join a well-established consultancy with a strong industry reputation, • Work on a wide range of technically interesting projects, • Hybrid working to support work-life balance, • Ongoing training and clear career development pathways, • Opportunity to deepen expertise in sustainable design and building performance If you're looking to develop your career in building physics within a supportive and forward-thinking environment, this could be a great next step. Get in touch to find out more or apply today.

Are you an experienced primary school teacher looking for a better work life balance? Would you like to build a wider knowledge of the primary schools across Luton? Whether you are an ECT or an experienced primary school teacher, Academics have the solution for you. We are on the hunt for reliable, motivated and flexible primary school teachers that are looking to work on a daily basis within primary schools in Luton! Primary School Supply Teacher Contract: Day-to-Day supply, short term and long term Location: Luton Salary: £140 - £155 per day Supply teaching is ideal for both newly qualified and experienced teachers, as you will be able to choose the hours and days that you work. What we offer: • A dedicated consultant for Bedfordshire who has great relationships with the local schools, • Great daily rates, • Excellent in house CPD opportunities, • Local schools, • Good to Outstanding schools Primary School Supply Teacher Requirements: • Qualified Teacher Status (QTS), • 1 Year UK teaching experience, • Knowledge of EYFS, KS1 & KS2, • Flexible and motivated primary teachers who are passionate about education, • Strong classroom management skills, • Flexible and adaptable approach to work, • Positive outlook, • Innovative & resourceful teaching methods Why Supply Teaching? • Excellent work life balance, • Flexibility to work as and when you want, • Builds classroom experience, • Provides permanent opportunities, • Variety of schools and children, • Great Professional Development Should Supply work be ticking the boxes for you then please get in contact with Louis today.

Are you an Electronic Design Engineer looking to step up into a more senior, responsible and autonomous position within a cutting-edge R&D team? We are looking for candidates having good electronics and electrical design with some basic firmware programming experience. Any exposure to higher voltage such as mains or EV would be an advantage. If you want a varied and dynamic role within a well established and successful business - based at our site in Watford, this role is the next step in your Electronic Design Engineering career. BASIC SALARY: Up to £75,000 BENEFITS:· 30 days holiday rising with service· Full access to company benefits package including pension · Flexible working within core hours LOCATION: Watford (with free on-site parking) COMMUTABLE LOCATIONS: Hemel Hempstead, St. Albans, Hatfield, Cheshunt, Harrow, Wembley, Hayes, High Wycombe, Berkhamsted, Tring, Luton, Dunstable, Hatfield, Welwyn Garden City, Stevenage, Slough, Maidenhead, London, Milton Keynes, Hitchin, Bletchley, Northampton, Bedford, Aylesbury, Guildford, Reading JOB DESCRIPTION: Electronic Design Engineer - Embedded Firmware, R&D, 'C', Test and Measurement Instrumentation As our Electronic Design Engineer working in our R&D department, you will be designing and developing electronic circuitry and firmware for portable and hand held electrical equipment. You will be redesigning existing products for annual product launches. KEY RESPONSIBILITIES: Electronic Design Engineer - Embedded Firmware, R&D, 'C', Test and Measurement Instrumentation · Product design of electronic circuitry and firmware for portable electrical equipment. · Maintenance of existing product line, e.g. due to component obsolescence, changes in standards, etc PERSON SPECIFICATION: Electronic Design Engineer - Embedded Firmware, R&D, 'C', Test and Measurement Instrumentation Ideally, you will have a proven track record of Product Design - Electronic, Electrical equipment. This could (for instance) be test and measurement equipment (medical, industrial, commercial etc.), domestic goods, personal electronics amongst many other things. Candidates with inverter development experience are generally strong matches, as are some candidates with EV BMS design. · Programming of real time, embedded firmware.· Proficiency in C· Analogue & digital electronic design.· Schematic capture using Altium or similar. · Experience of high voltage technology designs· Designing products to a set of legal / safety standards. Any exposure to ST MCU (Micro Controller Unit) design would be an advantage. THE COMPANY: We're approaching 100 years in business, we're a well-respected manufacturer and brand of portable & hand-held electronic instrumentation. With a heavy focus and investment on R&D and New Product Development, we're genuinely a market leader for innovation in our industry sector. PROSPECTS: Regular salary reviews and potential to develop your career with a well established and growing business. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Electronic Design Engineer, Electrical Design Engineer, Firmware Engineer, Systems Engineer - C, C++, MCU, Electrical Test & Measurement, Analogue Electrical Design. Low Voltage Systems, High voltage technology, Instrumentation, Product design, Research and Development (R&D). INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18321, Wallace ind Selection

General Maintenance Operative Luton - Aylesbury and surrounding areas Permanent About us MCR Property Group is a leading independent real estate investment and development company with a strong presence across the UK, operating from offices in Manchester, London, Birmingham, and Glasgow. The business focuses on the development of new residential and industrial projects alongside the active management of a diverse portfolio, which includes approximately 5,000 residential plots and commercial and industrial assets with a value in excess of £2 billion. The company is entering an exciting period of continued growth and is seeking motivated, reliable, and self-driven individuals who take pride in their work and have a genuine interest in property and building maintenance. This role offers the opportunity to join a supportive team within a business that is committed to quality, consistency, and long-term success. Who we want MCR Property Group is currently seeking a Maintenance Operative to join our team in the South East to cover a corridor aorund Ltuon, Aylesbury and surrounding areas. This is an excellent opportunity to become part of a fast-paced, thriving business that offers genuine opportunities for growth and long-term development. If you are looking to join a company where your skills are valued and your contribution directly supports the delivery and performance of high-quality property assets, we would be pleased to hear from you. As a Maintenance Operative, you will be responsible for carrying out routine maintenance works and reactive repairs across a range of residential, commercial, and industrial properties. Your duties will include undertaking tapering and jointing and wider carpentry, minor plumbing, electrical, carpentry, and HVAC repairs, as well as inspecting and maintaining building systems and equipment to ensure they remain safe, compliant, and fully operational. You will respond to maintenance requests in a timely and efficient manner, install, repair, and replace fixtures and appliances where required, and ensure that all working areas are kept clean, safe, and well organised. The role will require clear communication with property managers, colleagues, and tenants as necessary, alongside effective coordination with other team members to ensure work is completed smoothly and efficiently. Accurate record keeping will also form part of the position, with responsibility for maintaining clear logs of maintenance and repair activities undertaken. Applicants should have proven experience in a maintenance, handyman, or similar role and possess a strong working knowledge of general repair and maintenance tasks. A basic understanding of plumbing, electrical, carpentry, and HVAC systems is essential, along with the ability to use hand and power tools safely and effectively. You will be expected to demonstrate strong problem-solving skills, good attention to detail, and the ability to work both independently and as part of a wider team. Good communication and interpersonal skills are important, as is a proactive and reliable approach to work. A full driving licence and reliable transport are required, along with a willingness to travel to sites across Manchester and the surrounding area. Flexibility to undertake occasional evening or weekend work may be required depending on operational needs. Cladding experience is desirable, and candidates must have their own tools. What we offer In return, MCR Property Group offers a competitive salary and a comprehensive benefits package. This includes 20 days’ holiday plus bank holidays, increasing by one additional day for each completed year of service up to a maximum of 25 days, along with your birthday off. Employees benefit from a relaxed dress-down policy on Fridays, a free eye test voucher, and mileage reimbursement at 45p per business mile for work-related travel. The role also offers genuine opportunities for career progression within the company, supported by training, development opportunities, and ongoing health and safety training.

Are you a Surveyor seeking a new opportunity with OTE of up to £60k PA plus ? Do you have window and door, fenestration or a home improvement background? Join our national multi branded company where we value expertise, accuracy and a right first-time methodology. We are seeking Surveyors to verify our customers’ requirements, providing accurate measurements and drawings to facilitate a timely and successful installation. The ideal candidate for this role is someone with a strong background in construction, architecture, or engineering, specialising in home improvements. They should possess excellent technical knowledge of fenestration products, building regulations, and standards. Strong analytical skills, attention to detail, and the ability to communicate effectively with clients, contractors, and design teams are crucial. Key Responsibilities • Making arrangements with the customer to carry out their technical survey in line with our survey completion targets, • Travelling within the region to undertake the customer’s survey following our high standards, to ensure accurate measurements and drawings are provided in line with our Right first time, methodology, • Confirm with the customer all details and designs ordered are suitable, ensuring they are happy to proceed and have a full understanding of what they have ordered as well as offering solutions where applicable., • Liaise with the wider Anglian team reporting any discrepancies or changes which need to be made after surveying the customers property, • Input survey details onto the survey network and order materials as required, • Customer Focus, with excellent people and communication skills, • NVQ level 3 in Surveying or equivalent experience of surveying in the window and door industry, • Previous experience or equivalent qualification, of installing uPVC products, • Proficient IT Skills including Microsoft Office, • Ability to multi task, organise and good problem solver, • Competitive salary, • Pension – with the option to potentially save on tax and National Insurance with our salary sacrifice scheme., • Company Car, • 31 days holiday, increasing with service, plus an additional paid day for your birthday!, • Paid time off annually to volunteer, • Comprehensive health & well-being benefits including, heavily discounted gym memberships, employee assistance programme and free access to mental health first aiders, • Heavily discounted employee purchase scheme on all products, • Group Perks and freebies on days out, cinema, theatre, eating in and out, mobiles phones, food shopping and most major high street retailers, • Opportunity to work with a forward-thinking and supportive team., • Career development and continuous learning opportunities. Our Company is committed to monitoring & aligning its Policies with up-to-date Government guidance on reducing the spread of respiratory infections in the workplace. Through the Company’s value of “Succeed Together” we are committed to Equality, Diversity and Inclusion. We recruit the ‘best person for the job’ regardless of any protected characteristics as defined by the Equality Act 2010 creating an inclusive working environment and culture for our employees.

Combustion Engineer – Join Our Team at FläktGroup UK 📍London and Surrounding Counties | 🏢 Site Based We are looking for an experienced Combustion Service Engineer to provide engineering support across the west side of London and home counties, delivering high-quality, compliant services and maintenance for commercial gas systems. Application Details 📅 Deadline: 8th April 2026 (Continuous selection—apply early!) 📍 Location: Interviews will be held via MS Teams 📧 Questions? Contact our HR Team at 🔧 What You’ll Be Doing • Planned Maintenance & Technical Service: Carry out preventative maintenance on commercial and industrial gas equipment., • Emergency Call-Outs & Rota Participation: Be part of the duty rota, responding to emergency call-outs and ensuring that reactive issues are addressed within 4 hours., • Documentation & Reporting: Complete and submit daily/weekly reports, timesheets, and other required documentation for administrative purposes., • Customer Focus & Quality Compliance: Provide excellent customer service while ensuring that all work complies with safety regulations and meets high standards. 🧠 What You Bring • Full UK clean driving license, • Clear Enhanced DBS Certification, • Domestic Gas Safety:, • CCN1, CENWAT, CKR1, DAH1, CPA1, CONGLP1, • Commercial Heating & Pipework:, • COCN1, CODNCO1, CDGA1, CIGA1, CORT1, ICPN1, TPCP1, BMP1, • Commercial Catering Equipment:, • CCCN1, CODC1, COCAT1, COMCAT1, COMCAT3, COMCAT5, • Water Systems:, • Minimum 5 years in the commercial gas service industry as a mobile service engineer, • Gas Safety Installation and Use Regulations 1998, • Relevant standards & procedures used in the gas industry., • Gas Industry Unsafe Procedures., • Proficient in Microsoft Office (Excel, Outlook, Word), • able to work independently or within a team, • excellent customer service skills. What’s in It for You? FläktGroup UK is committed to supporting your growth and development. Join us and benefit 💷Competitive Salary 🚗Company van with private use available 🌴 25 Days Holiday (+ Bank Holidays & Holiday Purchase Scheme) 💰Pension Scheme 🛡️Life Assurance Scheme 🚴 Cycle to Work Scheme 🏆Long Service Awards 💙Employee Assistance Programme & Mental Health Support 📚Learning & Development Opportunities Why Choose FläktGroup? For over 100 years, we have proudly developed innovative and energy efficient Indoor Air Quality solutions for commercial buildings and critical ventilation applications. Today FläktGroup is one of the global leaders with +600 MEUR in sales to more than 65 countries and headquartered in Herne, Germany. With the widest product range in the industry, our products are found everywhere from homes, offices and schools, to hospitals, data centres, subways and offshore. 🔗 Learn more at Equal Opportunities: We are an equal opportunities employer, recruiting individuals on their suitability for the role, qualifications and experience. We welcome applications from all communities and backgrounds. Please note we do require applicants to hold the Right to Work in the United Kingdom. A note for recruitment agencies – The HR Team are responsible for recruitment across the company, and where possible will use direct hiring methods. We do work with a Preferred Supplier List, and where appropriate, we will release vacancies to those agencies who we deem most appropriate to support us. Only those agencies will be invited to submit candidates. Any speculative or unsolicited CVs sent to any employee of Flaktgroup will not be considered an introduction, and no fees will be applicable. Furthermore, we retain the right to pursue these candidates without query of ownership.

Logic360 Role: Panel Beater Location: Dunstable Employment Type: Permanent Working Shift Patterns: Monday to Friday Working Hours: 08.00am to 17.00pm (42.5 hour week) with weekend overtime available Salary: Competitive Salary on offer About Us: Logic 360 Ltd is a leading Talent partner to high profile Clients in the Automotive industry, committed to excellence and innovation. We pride ourselves on our dedication to delivering first-class services and solutions to our clients and our candidates. Our team is composed of skilled professionals who thrive in a dynamic and supportive environment, helping you along your professional journey. Client Information: Our client is a newly established but rapidly growing automotive service business, backed by the strength and resources of a leading UK Group. With over a year of successful trading under the Group, they have now launched as a standalone company with ambitious plans to expand nationwide. Already securing contracts with highly reputable dealerships, they have built strong technical teams and a reputation for delivering high-quality, efficient, and customer-focused vehicle services. This is an exciting time to join them at the beginning of their growth journey. You will be part of a forward-thinking company where your skills and expertise will be recognised, with opportunities to progress as the business continues to expand. Supported by the power of the wider Group, they offer stability, career development, and the chance to play a key role in shaping the future of a brand on the rise. Job Description: We are looking for a skilled and motivated Panel Beater to join our client’s professional body shop team. You will be responsible for repairing and replacing damaged vehicle panels to manufacturer standards, ensuring a high-quality finish and customer satisfaction. Key Responsibilities: • Assess damage and determine the appropriate repair or replacement method., • Remove, repair, and replace damaged body panels., • Use welding, filling, and straightening techniques to restore vehicles to their original condition., • Ensure all work is carried out to manufacturer standards and within agreed timescales., • Work collaboratively with paint sprayers, MET technicians, and preppers to complete jobs efficiently., • Maintain accurate records of work completed and parts used., • IMI / NVQ Level 2 or 3 qualification in Vehicle Body Repair (or equivalent)., • Proven experience as a Panel Beater within a body shop or accident repair centre., • Skilled in welding, jig work, and panel alignment techniques., • Familiarity with a wide range of vehicle makes and models., • Strong attention to detail and commitment to high-quality workmanship., • Ability to work independently and as part of a team., • Good problem-solving and practical repair skills., • Strong organisational and time management abilities., • Effective communication skills and a professional attitude., • Awareness of health and safety practices in a workshop environment. How to Apply: If you would like to be considered for this opportunity, we want to hear from you! Please send your CV to or apply through our website at Logic 360 Group – Recruitment done differently. Equal Opportunity Employer: Logic 360 Ltd is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We look forward to receiving your application and learning more about how you can contribute to our team. Thank you for considering Logic 360 Ltd as your next career destination! Please note that Logic 360 is a Recruitment Agency and Employment Business recruiting on behalf of our client.

Accounts and Audit Senior job opportunity based in Luton Due to continued growth the business is looking for an Accounts & Audit Senior to join the team based in Bedfordshire.Accounts preparation for client types including larger sole traders, partnerships and limited companies for manager or director review. Prepare corporation tax computation. Personal Tax work.Successful candidates will be experienced working in practice in the UK and able to demonstrate competence in all areas of auditing. The candidate will have good experience with audit planning, fieldwork and completion. The ability to work to deadlines and budgets is essential whilst ensuring they have excellent written and interpersonal communication skills.Skills and experience: • ACA/ACCA Qualified or final year of studies, • Up to date knowledge on corporate and personal taxes, • Competent using cloud-based software i.e. Xero, Sage.BenefitsThey provide a range of benefits:, • Flexible working, along with hybrid arrangements for qualified staff members., • Annual leave starting at 25 days (plus statutory bank holidays)., • Holiday purchase scheme., • Paid Overtime., • A group income protection insurance scheme., • Life assurance at four times basic annual salary., • Auto enrolment pension scheme., • Full study support for professional qualifications where relevant., • Professional subscriptions fees paid., • Free Onsite parking. If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career. 4764895

my client, a rapidly expanding company, are looking for a permanent Mobile vehicle technician to assist in the North London area The succesful candidate will work independently, attending workshops, conducting diagnostic scans, troubleshoot faults, assist with ADAS calibration, and program modules, as well as recommending or/ and performing small wiring repairs for vehicles involved in collisions or requiring repair. You will utilise the companies all in one device, oem tools and workshop manuals, hand tools etc. You will be building relationships with customers so good customer service skills are also essential. You will have a coverage area and will very occasionally need to stop in a hotel, depending on your coverage. This is Rare. Minimum qualifications • 2 years of experience in a car dealership or aftermarket repair facility as an automotive technician, • Experience with OEM and/or aftermarket scan tools, • Experience working on ADAS systems, mobile or in workshop/, • Preferably have company designated certifications and IMI ADAS certification, level 2 & 3 in electric/hybrid vehicle maintenance (or be happy to obtain in 6 mths), • Full UK Driving licence The salary is 40k per annum, plus Bonus up to £16,800

Audit and Accounts Senior job at Accountants located in Luton and Hybrid Due to continued growth this business is looking for an Audit and Accounts Senior to join their team at the Luton based office.Successful candidates will be experienced working in practice in the UK and able to demonstrate competence in all areas of auditing. The candidate will have good experience with audit planning, fieldwork and completion. The ability to work to deadlines and budgets is essential whilst ensuring they have excellent written and interpersonal communication skills. Our general split is 70:30 audit and accounts with local and national clients, both onsite and remote. You will be ACA/ACCA Qualified or final year of studies with up to date knowledge on corporate and personal taxes. Competent using cloud-based software i.e. Xero, Sage. Benefits include: Flexible working, along with hybrid arrangements for qualified staff members. Annual leave starting at 25 days (plus statutory bank holidays). Holiday purchase scheme. Paid overtime. A group income protection insurance scheme. Life assurance at four times basic annual salary. Auto enrolment pension scheme. Professional subscriptions fees paid. Onsite parking. If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion on your career. 4458033

Receptionist - Luton JOB DESCRIPTION Are you a friendly person who can warmly welcome our guests? Have you got strong communication skills? A fantastic opportunity has arisen for a receptionist to join our team. As front-of-house, it is essential that you are able to provide outstanding customer service and support to our guests whilst working on an array of tasks including guest check-in and administration. Previous reception experience is preferred, but not essential. Key skills and responsibilities include: • Meeting and greeting all visitors in a professional and courteous manner., • Good IT skills., • Excellent customer service skills., • A professional telephone manner., • Strong communication and interpersonal skills. WHAT WE OFFER As well as an excellent salary, we are dedicated to providing our colleagues with a vast range of benefits including: Company funded benefits • Private GP helpline., • Discount portal for popular retailers, restaurants, leisure and more., • Pension scheme., • Life assurance., • Employee assistance programme " A confidential helpline providing 24/7 advice and counselling whatever the issue., • 20% discounted gym membership., • Mental health support., • Health Cash Plan (level 1 is company funded)., • Critical illness cover., • Dental insurance., • Travel insurance., • Career development opportunities., • Genting Academy " online learning portal., • Long service awards., • Staff social fund., • Annual company Christmas present. OUR BUSINESS Genting Casinos is one of the UK's most popular leisure businesses and is proud to deliver outstanding service to our customers in our casinos nationwide. As part of the Genting Group, which employs 62,000 people worldwide, we are passionate about our values and providing our colleagues and customers with a fantastic experience. As an inclusive and diverse employer, we celebrate individuality and value the contribution that each person brings to our workplace. We continue to gain an understanding of the needs and requirements of our customers, colleagues and prospects and actively embrace and accommodate these. If you require any support in relation to your interview, such as guidance, advice or any adjustments, please contact us.

Brilliant at leading a team? Ready for the next step in your career as a Centre Manager with the UK’s largest Automotive service, maintenance and repair business with great career opportunities, benefits, and an uncapped bonus scheme! Here at National Tyres, we are looking for a Centre Manager, who will play a vital role in leading the team to success and providing an excellent customer journey and satisfaction. If you have the desire to help drive business performance, passionate about customer experience, and are looking for a long-term career with excellent progression and training schemes, this really could be the perfect opportunity for you, don’t delay apply today! • £37,000 - £40,000 per annum, • Average uncapped bonus of £10,800 per year (with potential to earn more), • 5 days a week (This centre is closed on Sundays), • Earn extra with our refer a friend scheme – T&C’s Apply. Benefits Include: 5.6 weeks’ annual leave Up to 50% off garage bills in our Autocentres and 25% off most our Halfords products in our retail stores Discounts on everything from groceries, shopping, insurance, days out, restaurants and more Family & Friends Discount Events Opportunity to buy a Trade Price Bike & enrol in the Cycle to Work Scheme Financial planning support via Wagestream - access up to 30% of your salary in advance GP Access, 364 days a year, 24 hours a day Join the Share save scheme with a 20% discount on shares Health Cash Plan – to access wellbeing services and claim back healthcare costs Pension Scheme & Life Assurance You will be given every opportunity to progress your career at Halfords. This includes access to hybrid training plus the ATA & MOT Tester Qualifications too. Skills and experience • Fantastic leadership and team management skills within the automotive or similar industry, • Experience delivering high customer satisfaction and displaying effective management., • Engaging and motivational, coaching-based approach to team development and able to provide in the moment training., • Experience of meeting compliance standards across Health and Safety, • Experienced with high sales turnover and managing KPI’s, • Excellent communication skills, verbally and written., • IT Proficient, with the willingness to learn in-house systems., • Good time management Not sure you meet all the criteria? We'd encourage you to take the wheel and apply anyway! At Halfords we are committed to creating an inclusive workplace for our colleagues. We're an equal opportunities employer and proud to welcome applications from all backgrounds and embrace diversity within our one Halfords Family.

Welcome to IFG, we are one of the fastest growing, education catering companies in the country and were recently awarded Education Caterer of the year at the Foodservice Catey Awards. IFG is has 4 amazing brands, Cucina, Innovate, Hutchison & Chapter One. We’re not going to bore you with a long list of empty adjectives, we want one simple thing: awesome people to help us feed more children better food. The role… Job Title: Chef Manager School Location: Priory Academy, Dunstable, LU5 Working Days: Monday to Friday Shifts & Working hours: 7am-2.45pm (36 and a quarter hours per week) Working Weeks: 42 weeks per year ( term time, inset days and 3 additional weeks) Pay Details: £28,000 per year Benefits: Bonus potential of up to 10% of salary (Companies Discression), Free meals onshift & IFG uniform Company pension and other great IFG benefits Your Background… We’re open to people with great cooking and people management skills. You will be an experienced Chef Manager, used to cooking using fresh seasonal ingredients at volume, managing your kitchen and liaising directly with onsite clients. As manager you will head up the team, making sure service runs smoothly and that all due diligence is adhered to. We’re not in the business of making school food, we’re here to make good food, after all, that’s why our clients and customers love us! What’s in it for me? So maybe you fancy working somewhere close to home, with daytime hours, and with your weekends and evenings free? Not to mention all school holidays off, giving you the opportunity for some great work-life balance. As an added bonus a free meal is supplied on shift! (and uniform) We’ll give you a place to grow and a career to be proud of. There are loads of free qualifications and career development opportunities to be had and we’ve got a staff discount scheme at over 850 retailers! We also run monthly opportunities for the best teams to win shopping vouchers... Next steps… If you think you’ve got what it takes, and the times above suit you, we’d love to hear from you! An interview and kitchen visit will be required for this role. IFG are committed to the safeguarding of children, and our employees share this commitment. Successful candidates are required to undergo an enhanced DBS disclosure and children’s barred list check, which IFG will pay for. We are a committed equal opportunities employer - if you require any assistance for the interview process, please detail within your application. All information is kept confidential and in compliance with GDPR requirements.

Senior Accountant (Practice) – Luton | £45,000–£50,000 + Progression to Manager We are working with a well-established and growing accountancy practice in Luton who are looking to hire a Senior Accountant to join their team on a full-time, office-based basis (with hybrid flexibility considered after probation). This is a fantastic opportunity for an experienced practice professional seeking a clear route to Manager level within a supportive and forward-thinking firm. The Role • Managing a portfolio of SME clients across various sectors, • Preparation and review of statutory accounts (FRS 102 & FRS 105), • Preparation of corporation tax and personal tax returns, • Handling client queries and building strong client relationships, • Supervising junior staff and reviewing their work, • Supporting partners with ad hoc advisory work Requirements • ACCA or ACA Qualified, • 7+ years’ experience within UK accountancy practice, • Strong technical knowledge of FRS 102 / FRS 105, • Good working knowledge of personal tax, • Confident managing your own client portfolio, • Strong communication and organisational skills What’s on Offer • Salary: £45,000 – £50,000, • Clear progression path to Manager level, • Hybrid working available after probation, • Supportive team environment with long-term career growth If you’re a driven Senior Accountant looking to step up in your career, apply now or get in touch for a confidential discussion. #SeniorAccountant #AccountancyJobs #PracticeAccountant #ACCA #ACA #LutonJobs #FinanceCareers #UKAccounting #FRS102 #FRS105 #TaxJobs #HiringNow #CareerProgression

Job Role: Mechanical Engineer (Plumber) Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first. Location: HMP Bedford- St Loyes Street, Bedford, MK401HG Salary: £43,177.30 per annum + 5% additional for working shifts covering weekends Contract: Full time/Permanent We are seeking a level 3 qualified Plumber to join our team at HMP Bedford, a Category B & Adult/Male prison - as a Mechanical Engineer. Join a team that is more than just a group of colleagues - we work Monday to Sunday as a supportive and driven family, working together to create a safe and nurturing environment. HMP Bedford runs like a self-contained town, it takes hundreds of people to keep it functioning, and as the Facilities Maintenance Team we are committed and driving the smooth and safe operation, like a heart that pumps blood through the body, everything we do impacts every prisoner, employee, and visitor, and wider to the families and community. As a Mechanical Engineer you will have the opportunity to work alongside experienced and passionate colleagues who vary from Plumbers, Electricians, Carpenters, Painters, to Cleaners, and Administrators, and others, who are all dedicated to making a positive difference, providing a safe and secure environment for all. If you are looking for a role where you can use your skills to create a better future for others, we encourage you to apply for this compelling opportunity and join us in our mission to promote rehabilitation and positive change and be part of a team that truly makes a difference. We are a Ministry of Justice business and provide critical and time-bound services to HMPPS, and are looking for a Plumber to join us as a Mechanical Engineer with one of the following qualifications and combination of skills: • C&G 6189 Plumbing and domestic heating, • C&G 5962 certificate in Plumbing (Advanced craft), • C&G 6019 Mechanical Engineering services (plumbing), • C&G 6018 heating and ventilation installation, • C&G 214 Engineering systems maintenance, • C&G 6188 Heating and ventilating, • C&G 6088 certificate in heating and ventilating, • C&G 6032 the advanced craft certificate in plumbing, • EAL Diploma in Plumbing and Heating, • Experience working on commercial or industrial heating, water or building service systems., • Unvented water heater vessel course G3 - Highly desirable, • Two years' experience working in a role as a plumber or equivalent, • Be familiar with and able to work to Water supply regulation and Control of Legionella L8 requirements, • Good working knowledge of planned preventive maintenance operations, • Good working knowledge of relevant health and safety requirements

We have an exciting opportunity for a Workshop Engineer based in Biggleswade for one of our clients on a full time permanent basis. Summary of theWorkshop Engineerrole Salary: £16.56 - £19.16 per hour D.O.E. The following information provides an overview of the skills, qualities, and qualifications needed for this role. Location: Biggleswade Type of Contract:Permanent, Full time Hours: 40 hour working week Monday Friday The role As the Workshop Engineeryourrole will involve the following important duties: • Carry out effective maintenance and repair work., • Carry out routine pre-delivery inspections of new machines., • Fit extras to machines where required - both factories approved and locally supplied., • Perform all forms of repair and servicing to machines., • Complete repair, overhaul and diagnosis of plant equipment., • Maintaining clear communication with the Workshop Supervisor. As a successful Workshop Engineer,you will have the following: • Full clean driving licence., • Completion of a recognised apprenticeship in a related industry to NVQ level 3 or above., • Demonstratable service Engineer experience particularly working on major component overhaul refurbishments., • Industry-related training such as CSCS card., • Previous experience with service software and interfaces. The business offers Counselling/employee wellbeing support, company pension, free fruit, flexible working hours, participation in external sports events e.g. race events, health programmes, management development/training, company sports teams, discount on company products. About Allstaff Recruitment Were an independent recruitment specialist based in Bedfordshire, supporting businesses across Bedford, Milton Keynes, and surrounding areas. We recruit for permanent, temporary, and contract roles across multiple sectors. Thank you for your interest in this role. One of our Recruitment Specialists will review your application shortly. Due to the high volume of applications, we regret that we cant respond to everyone directly. xrnqpay If you dont hear from us within seven days, please assume you have not been successful this time.

Senior Design Engineer Technical If your skills, experience, and qualifications match those in this job overview, do not delay your application. Location: Bedford Hours: 34.5 per week, Monday to Friday Salary: £42- £45k Our client is seeking a BD Senior Design Engineer Technical to join their technical team. This role will focus on delivering high-quality design solutions, supporting business development, and building strong relationships with customers across the construction sector. You will play a key role in advising clients on product applications, securing project specifications, and ensuring solutions are fit for purpose. This position also involves team leadership, stakeholder engagement, and driving continuous improvement across design and manufacturing functions. Key Skills for a BD Senior Design Engineer: • Proven experience in a design engineering role within construction or a related industry, • Strong knowledge of hydraulics, materials and product applications, • Experience using AutoCAD, SolidWorks and Microsoft Office, • Understanding of manufacturing processes such as fabrication and welding, • Strong communication and stakeholder management skills, • Ability to manage multiple projects and work under pressure, • Deliver technical design solutions for projects, including layouts, specifications and proposals, • Manage the design inbox and allocate tasks across the team, • Support and develop the design/programming team, including 1-2-1s and appraisals, • Build and maintain strong relationships with customers, contractors and designers, • Identify new business opportunities xrnqpay and bespoke product solutions, • Provide technical support to internal teams and assist with customer escalations, • Liaise with Product Managers on new product development, • Attend sales and operations meetings, contributing technical expertise, • Pension scheme, • Ongoing training and development, • Supportive and collaborative working environmentIf you feel you can be a good fit for this role, then please apply now!

Our client is a leading fire protection company and due to their continued expansion Staffbase has been appointed to recruit for the position for Fire Alarm Engineer. The Firer Alarm Engineer carry out preventive maintenance, inspection and testing of fire alarm systems at commercial client locations throughout South Central England. OTE £50K + per annum Role: You will operate as a field service engineer and you will be responsible for planned and reactive service and repair of fire alarm systems in the South Central England . Duties will include; Service and repair of fire alarm systems Morley, Protec, GENT and others Inspection testing emergency lighting Ensure all reporting and relevant work documentation is accurately completed Candidate: You will be an experienced Fire Alarm Engineer with at least five years experience. Good knowledge of fire alarm control panels such as Protec, GENT, Advance, Kentec, Morley required Preferably FIA trained. Must hold a UK Driving licence Max 6 points. Benefits: Excellent basic salary £37K + Commission + Travel Time + Overtime OTE £50K + 33 days annual leave Company Van & personal use Fuel card & parking apps Pension Excellent career progression opportunity...

An extra Multiskilled Maintenance Engineer is required to add to an existing team of Engineers doing planned and reactive maintenance, service, repair, breakdown and improvement of factory plant, production lines and machinery in a leading, profitable Bedfordshire manufacturing Company. Plans for future expansion, new production lines, improvements to use of Robotics, PLC controlled machinery will lead to you being involved in installation, maintenance and support of these new lines too. An ideal background could be multiskilled electrical, mechanical and possibly PLC machinery- someone with the skills to fault find electrically on machinery, drives, motors, controls, control panels and sensors - but also able to work with the Mechanical Maintenance Engineers on pneumatic, pumps, mechanical issues too. A good basic salary and company benefits package will be paid to the Maintenance Engineer, together with paid overtime, when available. There are Permanent Day, or Permanent Night working options available. Yes- 4 day on 4 day off working patterns, but not the alternating day/night shifts that many people find difficult to adjust to. With this, it will be permanent days, or permanent nights. For fuller details, please send a copy of your CV to Mark Burnard at Hartland Recruitment & Advertising Limited ASAP. Hartland Recruitment- a specialist technical recruitment agency findi...

Role: Warehouse Operative and Forklift Role Location: Luton LU4 Hours: Full time hours Monday to Sunday - 5 day requirement with 1 day working on the weekend. Morning shifts 6am - 2:30pm. Evening shifts 2:30pm-11pm Salary: £13.00 An excellent opportunity has now arisen for a Warehouse Operative to join our clients successful team. Benefits: Rapidly growing company Bonuses once gone permanent Parking on site Duties of a Warehouse Operative: Picking and packing Use of counterbalance forklift General warehouse duties Manual work What we would like from you: Good attitude Great attention to detail Previous warehouse experience If you are interested in this role, please apply below with your most recent CV. WGCTEMPS By applying to this job advertisement, you confirm you have read and understood our and give OA Group authorisation to hold you provided data. Thank you for your interest in this vacancy, which is being advertised by OA Group, who are acting as an employment agency / business. Your application will be considered in competition with others and we will contact you within 3 working days...

Client Manager Salary: Up to 61k Location: Luton office/Hybrid Working GemimiJobs are proud to be partnering with a London based accountancy firm who are in the market for a Client Manager to join their rapidly growing practice. Established in 1968, our client has been serving clients as accountants, business advisors, and tax consultants. Due to continued growth the business is looking for a Client Manager to join our team at our Luton based office. Successful candidates will be experienced working in practice in the UK and able to demonstrate competence in all areas of accounting. The candidate will have good experience with accounts planning fieldwork and completion. The ability to work to deadlines and budgets is essential whilst ensuring they have excellent written and interpersonal communication skills. What our client Offers: • Competitive salary and benefits package, • Hybrid and flexible working options, • Clear career progression and development opportunities, • Supportive and collaborative working environment

Are you an Electronic Design Engineer looking to step up into a more senior, responsible and autonomous position within a cutting-edge R&D team? We are looking for candidates having good electronics and electrical design with some basic firmware programming experience. Any exposure to higher voltage such as mains or EV would be an advantage. If you want a varied and dynamic role within a well established and successful business - based at our site in Watford, this role is the next step in your Electronic Design Engineering career. BASIC SALARY: Up to £75,000 BENEFITS: · 30 days holiday rising with service · Full access to company benefits package including pension · Flexible working within core hours LOCATION: Watford (with free on-site parking) COMMUTABLE LOCATIONS: Hemel Hempstead, St. Albans, Hatfield, Cheshunt, Harrow, Wembley, Hayes, High Wycombe, Berkhamsted, Tring, Luton, Dunstable, Hatfield, Welwyn Garden City, Stevenage, Slough, Maidenhead, London, Milton Keynes, Hitchin, Bletchley, Northampton, Bedford, Aylesbury, Guildford, Reading JOB DESCRIPTION: Electronic Design Engineer - Embedded Firmware, R&D, 'C', Test and Measurement Instrumentation As our Electronic Design Engineer working in our R&D department, you will be designing and developing electronic circuitry and firmware for portable and hand held electrical equipment. You will be redesigning existing products for annual produc...

Role Overview: Join Our Team at Busy Bees Leading Nursery Group in the UK Do you want to become a qualified Early Years Professional? Are you serious about a career in the Early Years sector? This role is ideal for anyone who has a genuine passion for working with children and is keen to learn and progress in their own professional development. Apply now, read the job details by scrolling down Double check you have the necessary skills before sending an application. About Us Busy Bees is the UK's leading nursery group, with nearly 400 nurseries across the UK and more overseas. We are dedicated to giving every child the best start in life and are proud to have won awards for our workplace culture. At Busy Bees, we ensure that every member of our team feels heard, valued, and nurtured. Why Work at Busy Bees? We offer a supportive environment that empowers you to create engaging, educational spaces where children can thrive. As part of our team, youll be introduced to our unique Bee Curious curriculum, designed to foster curiosity and confidence in young learners. Our Charitable Commitment Through our partnership with BBC Children in Need, we offer fantastic opportunities for community involvement and fundraising to support children's lives. About our Nursery Join our experienced team at Busy Bees Harpenden Rothamsted Lodge, an Ofsted-rated Good nursery with a capacity for 76 children. Our longstanding staff are dedicated to their professional development, with many working towards their Level 3 qualifications, and over 50% qualified as First Aid responders. Situated in a rural location, our nursery boasts large outdoor spaces for children to explore. We also benefit from convenient bus routes and a nearby train station for easy access. We offer free parking and a complimentary lunch for our staff, creating a supportive and enjoyable working environment. This is an excellent opportunity to grow your career in early childhood education! Busy Bees Benefits • Competitive salary, • Ongoing professional development and career progression, • Our Hive benefits and wellbeing hub, with discounts across a huge range of retailers, • Up to 28 days holiday per year (including bank holidays), • Your birthday off its our gift to you!, • 50% childcare discount, • Enhanced family leave and return to work bonus, • Menopause support through Peppy, • Financial support through Salary Finance, • Employee Assistance Programme and Mental Health First Aiders, • Cycle to Work scheme, • Easy access to your workplace pension through Cushon Ready to embark on your catering journey? Apply now and be a part of our extraordinary team! Role Responsibilities: Key responsibilities and expectations as an apprentice: • Involvement in planning stimulating activities for the children in your care in line with the EYFS, • Assisting in delivering a high level of quality childcare maintaining a professional and positive outcome for both children and staff, • Building effective relationships with children, parents and team members, • Ensuring each child's individual needs are met, • Contributing to the safeguarding of all children, • Actively work towards the apprenticeship standards provided by Busy Bees Education and Training with an expectation of completion within the agreed timeframe, • Be enthusiastic and proactive in developing own skills within the workplace, • Demonstrate commitment to continued professional development

Support Mentor When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. Due to the nature of the service, it is an occupational requirement that the post holder is female and the post is therefore exempt from the provisions of the Equality Act 2010 in terms of Schedule 9, Part 1, and Paragraph 1 of the Act. Job Title: Support Mentor (FTC) Location: Luton. Unfortunately, this service does not have step free access. Salary: £24,500 Shift Pattern: Fixed Term contract until May 2028. 37.5 hours per week Monday to Sunday on a rota which can range between 08:00 - 20:00 You may be required to work outside these hours dependent on service and resident requirements including weekends and bank holidays. About the Role We are looking for a dedicated team to deliver person centred and bespoke trauma informed support to vulnerable women in Luton. This service provides a safe, secure, and nurturing environment for women facing sexual exploitation and substance dependency a place they can truly call home. Through stable, person-centred care, you'll play a vital role in empowering women to rebuild their lives and embrace brighter futures. In this role, as a Support Mentor, you will work within a 24 hour service which provided person centred support to our residents, working to ensure the safety and wellbeing. Our residents have experienced multiple forms of exclusion, such as historical/ongoing abuse, involvement in the criminal justice system, mental health challenges, drug and/or alcohol dependency and enduring high levels of violence and coercion.You will build trusting professional relationships with residents, helping them to achieve their goals and aspirations. Responsibilities Include: Holding a caseload, conducting key work sessions which are personable to resident needs Carry out regular welfare checks, safeguarding checks, and general living checks Encourage residents to take part in activities and events both within the service and the community Keep support plans up to date on a regular basis Work closely with the rest of the team to provide overall excellent service delivery, this may mean also supporting with their caseloads, and other tasks as necessary Building trusting professional relationships with residents, helping them to achieve their goals and aspirations which could be through tailored one to one sessions, group sessions, in and out of service activities, and general wellbeing check ins. Focusing on empowering our residents to take control over their lives and meet their personal goals About You We are passionate about working in a supportive, solution focused and trauma informed way to support our residents and participants to make and sustain positive change. The successful candidate will work as part of a team to deliver exceptional support to women at a particularly challenging time in their lives. We are looking for passionate, motivated and proactive individuals who are dedicated to making a positive difference. Due to the nature of the service, it is an occupational requirement that the post holder is female and the post is therefore exempt from the provisions of the Equality Act 2010 in terms of Schedule 9, Part 1, and Paragraph 1 of the Act. Experience of working with people of complex backgrounds and/or a good understanding of the sector, particularly around multiple and complex needs Ability to show empathy and compassion to our residents, and different challenges they face Experience working with, or thorough understanding of, domestic abuse and the systemic barriers faced by women. Ability and willingness to show flexibility of working patterns, responding to the needs of the service and residents Alignment with our values of Ambition, Empowerment, Inclusivity, and Transparency Please refer to the JDPS attached for more details on the vacancy and our requirements/key criteria. What we Offer 25 days (Full time equivalent) annual leave, increasing with the length of service Employer Pension Contribution Eligibility to register with Blue Light Discount Card Access to discounted tickets for music events, shows, sports and more Reflective Practice regular sessions with a therapist provided by an external provider to support Mental Health and Wellbeing at work Training and Development, including access to courses, upskilling, and progression plans Employee Assistance Programme, including counselling Life Assurance Scheme Cycle-to-work scheme Annual Staff Awards EDI Ambassador programme About Social Interest Group (SIG) SIG is a not-for-profit organisation providing thousands of people with good-quality support and care in residential, drop-in centres, community floating support settings, probation settings, and hospitals. We do so across London, Brighton, Bedfordshire, Luton, Kent and Liverpool. Our goal is to transform lives through empowering change. We believe good care and support improves lives with the vision to create healthier, safer, and more inclusive communities. Join us on our mission to empower independence through trauma-informed solutions and dynamic partnerships that keep people out of prison, out of hospital, and off the streets. Additional Information Please note that this job advert may close early due to screening applications on an ongoing basis. We advise applying as soon as possible for your application to be taken into consideration at the early stages. Unfortunately, we are unable to provide sponsorship, please ensure you have full right to work in the UK prior to applying to our positions. TPBN1_UKTJ

Job Role: Field Service Engineer (Balers & Compacters) Location: Bedfordshire (Accepting Applicants from surrounding counties) Salary: £33,000-£35,000 base salary (OTE £42,000-£60,000pa) To be considered for an interview, please make sure your application is full in line with the job specs as found below. Hours: Monday-Friday + Door to Door Paid + Overtime @ 1.5x Job Type: Full time, Permanent The client: Interaction have partnered with a rapidly expanding, rewarding and innovate organisation based in the Suffolk area to support the growth of their engineering team. Due to continuous growth, we are looking for a skilled electromechanical engineer interested in learning, developing and progressing within the industrial cleaning machinery sector. The package: • 28 days annual leave including bank holidays + 1 additional day per year / up to 25 days + Bank, • Laptop, Company Vehicle, Fuel Card, Company Credit Card, • Company Pension Scheme, • Training & Development within industry, • Occasional overnight stays (Paid subsidiaries, food & drink allowance), • Overtime paid before 08.00 @ 1.5x hourly rate, 1.5x hourly after 16.30, Optional Weekend Work First four hours on Saturday , 2x for every hour after. Sundays & Public holidays are paid at 2x hourly rate, • Operate in a 1.5 hour radius of your location with door to door paid · To attend breakdowns, service and PPM's on an array of industrial scale compactor systems within the waste management industry. · The use of manual hand tools (Spanners, Screwdrivers), electrical hand tools (powered drills, grinders), lifting equipment (lifting slangs, hoists etc), Hot working tools (Blowtorch, heat guns) · To carry out electrical, electronic, mechanical fault finding alongside elements of hydraulic systems. · To manage your time effectively to ensure work is carried out to a high standard in a timely manner. · Update job reports and order parts when necessary. · Ensure Health & Safety Procedures are followed The Requirements: • Electrical, Electrical and/or Mechanical fault finding, repair & service experience would be advantageous., • Any previous experience with MIG/TIG Welding 0 Advantageous but not essential, • A good level of electrical or mechanical knowledge, similar roles could include plant engineer, maintenance engineer, hydraulic engineer, pneumatic engineer, mechanical fitter, forklift engineer., • Experience using electrical & mechanical tools. Thank you for taking the time, we hope to speak in the near future #T&E

Polaris Education - Stannard School, Dunstable SEN Class Teacher Salary: £28,000 - £39,520 Location: Stannard School, Dunstable Contract: Full-Time, Term Time Only Start Date: September 2026 About the School Stannard School is located in the historic market town of Dunstable, approximately 2 miles from the M1, and offers a safe and supportive environment for pupils from 5 to 18 years old as part of the Polaris Community. We have been passionately improving the lives of young people for over 30 years. We have a number of SEN schools across the UK that work together to provide each pupil with a tailored, diverse and appropriate education in a safe, supportive environment that promotes engagement, inspires learning and encourages achievement. We are also incredibly proud that 100% of our education services have been rated as Good or Outstanding by Ofsted. Are you a dedicated and experienced Teacher with a passion for special educational needs? Do you have a proven track record of creating inclusive and engaging learning environments? If so, this may be the perfect opportunity for you. We are seeking a dynamic individual to join our supportive and nurturing team, working together to achieve the very best outcomes for its pupils and help make a real difference to their lives. The Role The successful candidate will be responsible for teaching all allocated areas of the primary curriculum to a small bespoke class group of up to 6 pupils, with the support of a Teaching Assistant. You will be required to plan, prepare and present lessons that cater for the needs of the entire ability range. You will be required to: Motivate pupils through enthusiastic, imaginative presentation Work collaboratively with colleagues, parents and other professionals to ensure a high standard of education Monitor and assess pupils' progress, providing regular feedback to pupils, parents and colleagues Use a variety of teaching strategies and resources to promote pupil engagement and learning Create and maintain a safe and stimulating learning environment for all pupils Ensure all school policies and procedures are adhered to in line with the school values Requirements Qualified Teacher Status or equivalent Successful SEN teaching experience A good knowledge of the National Curriculum Patience, empathy and a genuine commitment to the success of every pupil The successful candidate will be required to complete an enhanced DBS check, the cost of which will be covered by Polaris Community. We are an equal opportunities employer and positively encourage applications from suitably qualified and eligible candidates. We are committed to safeguarding and promoting the welfare of children, young people and vulnerable adults and expect all staff to share this commitment. TPBN1_UKTJ

Role Overview: Join Our Team at Busy Bees – Leading Nursery Group in the UK Do you want to become a qualified Early Years Professional? Are you serious about a career in the Early Years sector? This role is ideal for anyone who has a genuine passion for working with children and is keen to learn and progress in their own professional development. About Us Busy Bees is the UK's leading nursery group, with nearly 400 nurseries across the UK and more overseas. We are dedicated to giving every child the best start in life and are proud to have won awards for our workplace culture. At Busy Bees, we ensure that every member of our team feels heard, valued, and nurtured. Why Work at Busy Bees? We offer a supportive environment that empowers you to create engaging, educational spaces where children can thrive. As part of our team, you’ll be introduced to our unique Bee Curious curriculum, designed to foster curiosity and confidence in young learners. Our Charitable Commitment Through our partnership with BBC Children in Need, we offer fantastic opportunities for community involvement and fundraising to support children's lives. About our Nursery Join our dedicated team at Busy Bees Harpenden Leyton Road, an Ofsted-rated Good nursery with a capacity of 55 children. Our friendly environment is supported by an exceptionally long-standing service team committed to providing children with the best start in life. Conveniently located in the heart of a picturesque town, we have easy access to train and bus links to London and surrounding areas. We offer free parking and a complimentary lunch for our staff, creating a supportive and enjoyable workplace. This is a fantastic opportunity to be part of a nurturing team in early childhood education! Busy Bees Benefits • Competitive salary, • Ongoing professional development and career progression, • Our ‘Hive’ benefits and wellbeing hub, with discounts across a huge range of retailers, • Up to 28 days holiday per year (including bank holidays), • Your birthday off – it’s our gift to you!, • 50% childcare discount, • Enhanced family leave and return to work bonus, • Menopause support through Peppy, • Financial support through Salary Finance, • Employee Assistance Programme and Mental Health First Aiders, • Cycle to Work scheme, • Easy access to your workplace pension through Cushon Ready to embark on your catering journey? Apply now and be a part of our extraordinary team! Role Responsibilities: Key responsibilities and expectations as an apprentice: • Involvement in planning stimulating activities for the children in your care in line with the EYFS, • Assisting in delivering a high level of quality childcare maintaining a professional and positive outcome for both children and staff, • Building effective relationships with children, parents and team members, • Ensuring each child's individual needs are met, • Contributing to the safeguarding of all children, • Actively work towards the apprenticeship standards provided by Busy Bees Education and Training with an expectation of completion within the agreed timeframe, • Be enthusiastic and proactive in developing own skills within the workplace, • Demonstrate commitment to continued professional development

We are currently working with a tier 1 contractor who are looking for an MEP Quantity Surveyor to join their major projects site in Somerset. An exciting opportunity for one of their flagship sites in the UK. Submit your CV and any additional required information after you have read this description by clicking on the application button. Role: MEP Quantity Surveyor Salary: Competitive salary or day rate Location: Somerset (subsistence is available for any permanent staff who require stay away costs) The Quantity Surveyor role – MEP – Major project • Experience as a recognised QS with strong commercial awareness with a focus on profit and cash, • Assist with the commercial packages for the MEP, • You will manage a range of commercial aspects including procurement, tendering, contract administration, variations and management of subcontract works packages through to final account., • You'll be keen to minimise risk, cost and maximise value by cost checking and analysis of labour, plant and materials. xrnqpay, • Knowledge and experience in managing MEP packages, • Pre contract through to post contract experience, • Large scale major project experience / Construction Management experience, • Strategy – Can disseminate a breadth of internal and external data and apply sound judgement regarding the strategic direction of the business

ABOUT YOU Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants. As the Certification Engineer, you will have strong analytical skills, enabling you to review technical documentation, make sound engineering judgements, and support certification decisions. Organised and detail-oriented, you can manage multiple projects while collaborating effectively with colleagues and clients. Required skills and experience: • Degree in electrical engineering or equivalent in terms of education, experience, or training., • Experience in testing and/or certification of electrical products., • Experience with switchgear and control gear products and standards (IEC 61439 series)., • Ability to make sound engineering judgements based on relevant professional experience., • Ability to scrutinise and compare technical documents., • Good IT literacy skills (Microsoft Office). ABOUT THE OPPORTUNITY As the Certification Engineer you will help coordinate the company's product certification activities and take an active role in the product certification process for our ASTA certification schemes. Key activities: • Conducting certification activities (Recommendation and Certification Decision) for all schemes., • Preparation, review and authorisation of test programmes., • Creation and checking of certificates and technical reports., • Assessment of laboratories to ISO 17025 and Intertek Requirements., • Witnessing of testing activities undertaken as part of the ASTA schemes., • Processing and management of enquiries, quotations and orders for type testing and certification., • Regular monitoring of project status including discussions with colleagues in other offices., • Supporting of sales teams to progress the technical aspects of the sales process., • Liaising with clients, including the development of professional relationships and providing technical support., • Undertaking project work primarily for products within the IEC 61439 series of standards. WHAT WE OFFER Join Intertek and become part of our global network of inspiring and entrepreneurial colleagues. We are a global family that values diversity and we thrive working together with precision, pace, and passion. We are working to make the world Ever Better, ensuring the quality, safety and sustainability of products and services used by millions of people around the world. • Competitive salary/benefits, • Development and career opportunities around the Globe, • Working in a highly motivated team and dynamic working environment We are an Equal Opportunity Employer who do not discriminate against applicants. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex or national origin. xrnqpay Intertek operates a preferred supplier arrangement, and we do not accept unsolicited approaches from agencies.

Overview: Working alongside our client, a leading injection moulding manufacturer, we are looking for a skilled Injection Moulding Technician to join their established team in support of continued business growth. Increase your chances of reaching the interview stage by reading the complete job description and applying promptly. Remit: • This position will suit a skilled Injection Moulding Technician who is looking to continue their own personal development and career progression, • Candidates MUST HAVE demonstrable experience within injection moulding manufacturing with the ability to set, condition and optimise injection moulding machines, • The successful Injection Moulding Technician will be responsible for all tool changes as and when required to set up machines to run new products within a specific timeframe, • As Injection Moulding Technician you will be accountable for setting up injection moulding machinery to first off standard, ensuring use of set process., • In the role of Injection Moulding Technician, you will monitor injection moulding process to include condition setting, ensuring product quality and reliability., • Ensure all mould tooling is maintained to a high standard, liaising with the tooling department when faults are identified to ensure rectification ensuring schedules are adhered to., • Ensure the quality department are made aware of any injection moulding issues and all non-conforming plastic products are quarantined., • Ensure all H&S regulations and guidelines are adhered to, and any non-conformances report to relevant personnel., • Industry recognised injection moulding qualification, • Experience with Romi machines and Sepro robots an advantage, • Demonstrable experience within injection moulding manufacturing, • Good communication and people skills, • Strong attention to detail, • Reliable and flexible, self motivated and enthusiastic FOOTER Due to the sheer volume of applications we receive we will only contact successful applications that meet the requirements of our client job brief. Therefore, if you have not heard from us within 10 working days, please deem your application as unsuccessful. For all UK job positions work seekers must be eligible to work and live in the UK Sierra 57 Consult Technical Engineering & Manufacturing Recruitment Specialist Plastics, Packaging & Precision Engineering Sierra 57 Consult Ltd are acting as an Employment Agency in relation to this vacancy. In compliance with the new regulations (April 2004) in place under the Employment Agencies Act, Sierra 57 Consult will require proof of identification. A current copy of a passport, driving license, ID card or NI card will be required as part of the registration process. Email copies are acceptable. Sierra 57 Consult has been designed to project manage the mechanics of all aspects concerning the recruitment processes, implementing a simple and succinct method for targeting and introducing bona fide and skilled candidates to reputable clients and potential employers. xrnqpay If this advertised position does not interest you, please consider our other opportunities by sending your updated CV outlining your achievements and your personal requisites, i.e. salary, location, job roles. Please just Google Sierra 57 & register with us.

Maintenance Technician To be considered for an interview, please make sure your application is full in line with the job specs as found below. Location: Leighton Buzzard, Bedfordshire (commutable from Milton Keynes, Dunstable, Luton, Aylesbury, and surrounding areas) Package: Basic salary up to £35,000 (dependent on experience) plus benefits Hours: Monday to Friday 8:00am - 16:00pm (day-based, full-time) Sector: Foam products and packaging manufacturing Protecting what matters, together At Macfarlane Packaging, we protect what matters most - our people, our customers, our communities and the environment. With over 75 years of heritage, we combine long-term stability with a forward-thinking, continuous improvement culture. You'll be joining a supportive and collaborative business where technical expertise is valued, development is encouraged, and everyone has the opportunity to make a meaningful contribution. About our business Polyformes, part of Macfarlane Group, has been established for over 40 years and is recognised as Europe's largest polyethylene foam converter. Based at our Leighton Buzzard manufacturing site, we support a wide range of customers with specialist foam and protective packaging solutions. Maintenance Technician Role We are looking to recruit a practical, reliable and motivated Maintenance Technician to support our Leighton Buzzard manufacturing operation. This is a hands-on role where you will play a key part in maintaining site machinery, reducing downtime and supporting production performance. The role would suit someone with previous maintenance or engineering experience, or a strong practical background with the desire to develop further in a manufacturing environment. Key responsibilities • Carry out planned preventative maintenance to support equipment reliability and uptime., • Respond to breakdowns, assisting with fault finding and repair activities., • Support maintenance and repair of mechanical and basic electrical systems including motors, drives, gearboxes, hydraulics and pneumatics., • Assist with installation, modification and improvement of machinery and site facilities., • Complete routine inspections in line with health and safety procedures., • Accurately record maintenance activities and update logs and reports., • Work closely with production teams to minimise downtime and improve efficiency., • Previous experience in a maintenance, engineering or hands-on technical role or strong mechanical aptitude with a willingness to learn., • Basic mechanical or electrical understanding., • Ability to fault-find and safely use hand tools., • Proactive approach with good problem-solving skills., • Strong attention to detail and commitment to safe working practices., • IT literacy, including use of Microsoft Word, Excel and Outlook for reporting., • Team-focused with clear communication skills., • Full UK driving licence and ability to commute daily to Leighton Buzzard. Desirable (training can be provided), • Mechanical or electrical qualifications (e.g. NVQ Level 2 or 3)., • Experience working with motors, bearings, gearboxes or control systems., • Knowledge of hydraulics and pneumatics., • Experience maintaining machinery within a manufacturing or production environment., • Familiarity with CMMS or digital maintenance systems.

Client Manager Salary : Up to 61k Location : Luton office/Hybrid Working GemimiJobs are proud to be partnering with a London based accountancy firm who are in the market for a Client Manager to join their rapidly growing practice. Established in 1968, our client has been serving clients as accountants, business advisors, and tax consultants. Due to continued growth the business is looking for a Client Manager to join our team at our Luton based office . Successful candidates will be experienced working in practice in the UK and able to demonstrate competence in all areas of accounting. The candidate will have good experience with accounts planning fieldwork and completion. The ability to work to deadlines and budgets is essential whilst ensuring they have excellent written and interpersonal communication skills. What our client Offers: Competitive salary and benefits package Hybrid and flexible working options Clear career progression and development opportunities Supportive and collaborative working environment Ongoing technical and professional training Role Overview The role involves managing a varied portfolio of audit (where applicable) and non-audit clients, overseeing the delivery of high-quality statutory accounts and audit assignments (where applicable), and leading, developing, and mentoring junior team members. This is a key role within the firm, offering exposure to a broad client base and clear opportunities for progression . Portfolio expectations: Up to £750k Key Responsibilities Client Management Manage a diverse portfolio of audit (where applicable) and accounts clients, acting as the main point of contact, taking responsibilityfor. Team/Resource planning Managementof WIP and billing(in accordance withour internal KPIs) Efficient use of IT resources available. Client onboarding, engagement, and disengagement in conjunction withtheadminteam. Build and maintain strong client relationships, providing a high level of service and technical support Identify opportunities for additional services and assist partners with business development Accounts Review statutory accounts prepared under UK GAAP (FRS 102 and FRS 105) and, where applicable, IFRS Resolve technical accounting issues, escalating complex matters where appropriate Ensure accounts are completed efficiently, within budget, and to a high technical standard Ensure that files are complete and delivered to the Directors in a timely manner to enable Director review prior to client meetings Ensure compliance with relevant accounting standards, ethical requirements, and internal firm procedures Contribute to accounts quality initiatives Keep up to date with changes in accounting and regulatory standards TPBN1_UKTJ

Company Overview Interfoam Limited is a family-run manufacturing business with over 30 years of experience in producing moulded polyurethane foam and plastic components. We serve diverse industries including automotive and medical, emphasizing trust, quality, and innovation. Our commitment to sustainability is reflected in products like Bio-Pur foam, which reduces carbon emissions while maintaining high performance. Apply fast, check the full description by scrolling below to find out the full requirements for this role. About the Role We are seeking an experienced Toolmaker to join our established in-house Tooling team at our Bedford manufacturing site. This is a hands-on role focused on the manufacture, maintenance and repair of moulds and tooling used to produce moulded foam products for sectors including automotive, rail, aviation, and furniture. This position is well suited to an experienced Toolmaker looking for long-term stability, technically varied work, and the opportunity to play a key role in the future development and succession of our tooling function. Key Responsibilities Tool & Mould Manufacture • Produce patterns and master models from technical drawings, templates or foam samples, • Manufacture moulds using wet lay or cast resin methods, • Machine tooling using CNC (3-axis), lathes, mills and EDM (5-axis advantageous), • Welding and fitting frames, pins and inserts, • Hand finishing and polishing moulds, • Application of paints and sealants Mould Maintenance & Repair • Repair and modify moulds, • Diagnose tooling-related production issues, • Carry out modifications to improve quality and efficiency Process & Product Support • Support trials of new foam products and tooling, • Optimise venting, draft angles and parting lines, • Work with engineers and designers Quality & Continuous Improvement • Measure and inspect tooling, • Ensure durability and repeatability, • Contribute to continuous improvement General Duties • Liaise with Sales on tooling requirements, • Maintain a safe and organised workshop, • Follow Health & Safety procedures Full job description available on request. Skills & Experience Required Essential: • Proven Toolmaker / Precision Engineer experience, • Ability to interpret technical drawings, • Experience working with wood, metals and resins, • Skilled in 3-axis CNC machining, milling, turning and welding, • Strong problem-solving skills, • Good communication skills Desirable: • Foam or composite tooling experience, • 5-axis CNC experience, • Understanding of foam behaviours Qualifications • NVQ Level 3 / City & Guilds or equivalent, • BTEC / HNC / HND in Engineering, • Completed apprenticeship What We Offer • Competitive salary (dependant on experience), • Early Friday finish, • Secure permanent role, • In-house tooling work, • Opportunity to contribute to long-term tooling succession, • Supportive team environment This advert has been prepared for direct hiring purposes. xrnqpay Agency terms not accepted unless agreed in advance.

You could be just the right applicant for this job Read all associated information and make sure to apply. Our client is looking for an experienced Chartered Surveyor for Bedford, this role is Hybrid, the ideal candidate will have the following Qualification: MRICS / FRICS. About the Company They are a growing and forward-thinking commercial property consultancy, operating across Bedfordshire, Milton Keynes, Hertfordshire and the wider South East. Following a recent strategic expansion and investment into the business, we have significantly strengthened our capabilities across agency, investment, and property management, supported by modern systems, a collaborative team structure, and an increasingly high-quality client base. About the Role They are seeking an experienced Chartered Surveyor (MRICS) to join their Professional Services team. This role will focus on delivering RICS Red Book valuations, lease renewals, rent reviews, and negotiation-led advisory work, acting for a wide range of clients including landlords, investors, lenders, and occupiers. This is an opportunity to join a growing platform with strong deal flow, where you will play a key role in shaping and expanding the Professional Services offering. Key Responsibilities • Undertaking RICS Red Book compliant valuations (secured lending, portfolio, asset management and advisory), • Acting on lease renewals (Landlord & Tenant Act 1954), • Advising on and negotiating rent reviews, • Delivering landlord and tenant advisory services, • Leading commercial negotiations on behalf of clients, • Preparing high-quality valuation reports and professional advice documentation, • Supporting agency and investment teams with valuation and strategic input, • Building and maintaining strong client relationships The ideal candidate will have: • MRICS qualification (essential), • Post-qualification experience in commercial property, • Strong track record in Red Book valuations, • Proven experience in lease renewals and rent reviews xrnqpay, • Strong negotiation and advisory capability, • Excellent report writing and analytical skills, • Highly competitive market salary (with upside based on performance and billing), • Optional consultancy / fee-share structure for experienced individuals, • Access to a strong pipeline of valuation and professional work, • Opportunity to build and grow a professional services client base, • A modern, well-resourced platform with strong operational and marketing support, • Clear route to senior leadership and equity participation for the right candidate

Field Service Engineer Check below to see if you have what is needed for this opportunity, and if so, make an application asap. £38,000 to £48,000 plus good bonus Bedford MC Technical Recruitment is currently looking to recruit a Service Engineer for a power generation business to service & maintain large Engines based on sites around the Bedford & Milton Keynes area. As Engine Maintenance Technician you will be responsible for: • Carrying out planned & unplanned maintenance on various landfill gas sites., • Responding to breakdowns & carrying out repairs efficiently on large Gas Engines & CHP units., • Operating within strict H&S standards., • Ensuring all paperwork & legislation is followed & kept up to date., • Working as part of a 1in 11 on-call rota with a team of other engineers., • Proven experience in an engine maintenance role., • A relevant engineering qualification; Apprenticeship/SVQ/NVQ/BTEC/HNC etc, • Experience with gas engines would be advantageous., • The ability to travel to varied sites with a flexible approach to hours., • Salary between £38,000 & £48,000 depending on experience, • Company vehicle £ fuel card, • Bonus schedule, • On call payments, • A company pension If you are interested in this role please apply via the link below or contact Matt George at MC Technical Recruitment on / for a confidential chat.

GemimiJobs are proud to be partnering with a London based accountancy firm who are in the market for a Personal Tax Manager to join their rapidly growing practice. Established in 1968, our client has been serving clients as accountants, business advisors, and tax consultants. Ensure you read the information regarding this opportunity thoroughly before making an application. Due to continued growth the business is looking for a Personal Tax Manager to join our team at our Luton based office . Successful candidate will be experienced of managing a varied portfolio of private clients, including high-net-worth individuals, trusts, and estates, and able to oversee the delivery of high-quality personal tax compliance and advisory services. The role will involve acting as the main point of contact for clients, providing technical guidance, managing deadlines, and supporting the development of junior team. members. This is a key role within the firm, offering responsibility, client exposure, and opportunities for progression. Skills and experience: Personal skills: Well-presented and professional Strong organisational and time management skills Excellent communication and interpersonal skills Experience: CTA qualified, or ACA / ACCA qualified with significant personal tax and trust experience. Strong experience within a UK accountancy or tax practice. Good technical knowledge of UK personal tax, trust, and estate taxation. Experience managing a personal tax and trust client portfolio. Experience supervising and developing junior staff. Benefits apply for all vacancies We provide a range of benefits to help you meet your aspirations now and for the future. xrnqpay This includes: Flexible working, along with hybrid arrangements for qualified staff members Annual leave starting at 25 days (plus statutory bank holidays) Holiday purchase scheme We offer paid overtime rare in our sector we know! A group income protection insurance scheme Life assurance at four times basic annual salary Auto enrolment pension scheme Employee Assistance Programme for challenging situations whether they be personal or work related Full study support for professional qualifications where relevant Professional subscriptions fees paid Onsite parking

Our client is a small specialist air conditioning company that is going through expansion. It is looking to hire an air conditioning engineer to cover London. Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. As the Air Conditioning Engineer, you must have a proven track record in a similar role and be able to work on VRV, VRF, Splits and other commercial air conditioning units. You will work in a variety of commercial environments, carrying out service, repairs and breakdowns. The successful Air Conditioning Engineer must be qualified to F Gas, have a drivers licence and be happy to travel around parts of London and home counties. This is a lovely opportunity to join a small but growing company. xrnqpay Our client is offering: £48,000 basic salary Brand new van and fuel Overtime available Pension scheme All specialist tools and IT Excellent working conditions This is a fantastic opportunity for someone experienced who can work by themselves, has a good attitude and wants to join a small and growing business.

Electrical Estimator Experience, qualification, and soft skills, have you got everything required to succeed in this opportunity Find out below. Bedfordshire | Full-Time | Permanent | £45,000 - £55,000 We are currently recruiting for an experienced Electrical Estimator to join a growing electrical contractor working across commercial refurbishment and fit-out projects. This is a permanent opportunity for an estimator with strong technical knowledge, commercial awareness, and experience pricing electrical works within the construction sector. The role is primarily office-based in Bedfordshire, with occasional travel for site surveys, client meetings and tender reviews. Projects typically include commercial offices, education, leisure and hospitality environments, and the successful candidate will play a key role in producing accurate tenders and supporting work-winning activity. Electrical Estimator - Role Overview As Electrical Estimator, you will be responsible for preparing accurate, competitive and commercially sound tenders for a range of commercial electrical projects. You will review drawings and specifications, manage enquiries, obtain supplier and subcontractor pricing, prepare tender submissions, and support handover to the delivery team once projects are secured. Electrical Estimator - Key Responsibilities • Prepare detailed electrical estimates and tender submissions, • Review drawings, specifications and employers requirements, • Identify discrepancies, gaps and commercial risks within tender documents, • Raise and manage RFIs with clients, consultants and design teams, • Source competitive prices from suppliers and wholesalers, • Issue subcontractor enquiries and assess returned quotations, • Produce bills of quantities, schedules of work and pricing documents, • Support final tender review process and commercial sign-off, • Prepare offer letters including exclusions, clarifications and programme details, • Manage multiple tenders at various stages, • Support project handover to operations and project delivery teams, • Minimum 3 years experience as an Electrical Estimator, • Previous experience within electrical contracting or building services, • Strong technical knowledge of electrical installations, materials and methods, • Good understanding of BS 7671, • Experience using estimating software, • Good Microsoft Office skills, • Strong communication, organisation and time management skills, • Experience xrnqpay using Ensign estimating software, • Background in commercial refurbishment, fit-out or M&E projects, • £45,000 - £55,000 per annum, • Company pension, • 28 days holiday including bank holidays, • Company mobile phone and IT equipment, • Mileage reimbursement for site visits, • Ongoing training and development

HGV Technician Maximise your chances of a successful application to this job by ensuring your CV and skills are a good match. Location: Biggleswade Salary: Up to 20ph + shift allowance Hours:4 on 4 off 6.00pm - 6.00am Ref:30173 We have a new vacancy for a HGV Technician for one of our most established family run dealer groups in the UK. This role suits a HGV Technician looking for a long-term role. The company are a long-standing, reputable outfit with an excellent reputation with staff retention. They value every employee across all workshops and sites. Company benefits: • Competitive Pay, • On-Site Parking, • Structured Career Development, • Work-Life Balance Monday to Friday schedule with no weekend shifts., • Generous Leave, • Comprehensive Benefits, • Employee Perks, • 22 days holiday, increasing periodicallyto 26 daysHGV Technician role:, • Diagnosing, maintaining, and repairing a wide range of vehicles, • Working with top brands like Mercedes, Iveco, and Ford, • Ensuring all vehicles meet safety and quality standards, • Prepare vehicles for MOT

MOT Tester Applying for this role is straight forward Scroll down and click on Apply to be considered for this position. Location:Watford Salary:£35,000 basic per annum plus other company benefits Hours:full time Ref:30351 We have a new vacancy available for a MOT Tester in Watford. My client is one of the UK's leading car dealerships in the area and they're looking for an experienced MOT Tester to join a great team! If you're a MOT Tester currently on the lookout, then apply now! MOT Tester Role Carry out MOT tests on all vehicles booked in. Ensure Manufacturer and Company compliance with all administration standards and procedure Ensure that all work carried out is to MOT and/or manufacturers' safety standards Advising customers on the outcome of their tests, and any remedial work that may be required Follow Health & Safety regulations MOT Tester Requirements Relevant MOT testing qualification Proven experience of working in a similar role Full UK driving license Good working knowledge of vehicle diagnostics How to Apply If you are interested in applying for this MOT Tester vacancy, then please send your CV and we will contact you on receipt. All applications will be treated with the utmost confidentiality. xrnqpay Consultant: Robert Samuels - Octane Recruitment RSVT Octane Recruitmentis a specialist Automotive and Motor Trade recruitment agency, working with main dealerships, bodyshops, tyre management companies, parts distribution centres, independent garages, fleet operators, HGV companies, import centres and manufacturers across the UK. We recruit across the motor trade and related industries.

Role: Senior CDM Consultant/ Principal Designer Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first. Location: Remote position - projects across the Home Counties & London Sector: CDM/ Principal Designer practice Salary: Up to £68,000 + bonus scheme + attractive benefits package WRG has partnered with a well-established, independent CDM/ Principal Designer consultancy with ambitious growth plans for 2026. The business is looking to appoint an experienced Senior CDM Consultant/ Principal Designer to oversee a varied portfolio of property and construction projects across London and the Home Counties. The consultancy operates on a fully remote basis, with monthly team get-togethers at its London HQ, offering flexibility without losing the benefits of collaboration. Youll work with a diverse client base across the property and construction sector, delivering CDM and Principal Designer services on projects ranging in value from £300k to £500m. Over the past six years, the business has built an excellent reputation within the industry, resulting in strong levels of repeat business and consistent, organic growth. As part of the next phase of expansion, they are seeking a technically strong, confident Senior CDM Consultant/ Principal Designer to manage their own portfolio of projects across sectors including residential, commercial, retail, office, leisure, hotel, and heritage sectors. This role would suit a client-facing consultant from a consultancy background who is looking for greater autonomy, trust, and the opportunity to regain a healthy work-life balance without compromising on the quality or scale of projects. Responsibilities: • Offer a range of CDM & PD services to clients., • Oversee the design risk register and attend design risk reviews, along with offering input in relation to safety in design., • Ensure that pre-construction information is readily available for each project and is kept up to date., • Sit in on design and client team meetings and offer advice around safety in design., • Preparation of health and safety files and construction phase plans where required., • Carry out site inspections and ensure that RAMS are in place for each project., • NEBOSH Construction Certificate or equivalent., • NEBOSH Diploma or equivalent (desirable but not required)., • Membership to IOSH, APS, IIRSM or similar professional body., • APS 2 Day Principal Designer course or similar qualification., • Excellent understanding of 2015 CDM Regulations., • Good understanding of BSA and the changes affecting the industry., • Salary from £60,000 - £68,000 (dependant on experience)., • Travel and mileage expenses covered., • Remote working environment., • Annual bonus scheme., • 26 days holiday + 8 days bank holiday., • Company pension plan., • Private healthcare scheme., • Excellent CPD, training and support., • Professional membership fees covered. xrnqpay, • Clear career pathway with opportunities for progression and development.

Company description: Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees globally, across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers. There are no limits to where you can take your career. Job description: Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Based at our Luton manufacturing plant youll do just that. Established in 1993, GKN Aerospace in Luton is a world leader in commercial and military ice protection systems and transparencies. Offering a full range of capabilities; design, analysis, testing, certification and manufacture of electro-thermal ice protection, military fast jet canopies and flight deck windows to over 20 programmes including: Boeing 787, Dreamliner, Airbus A320, AgustaWestland, AW101, Eurofighter Typhoon and Lockheed, Martin F-22 Raptor. Our customers include Boeing, Airbus, Lockheed Martin, Bell Helicopters, Textron, BAE Systems, Pratt & Whitney, Leonardo. Our Luton site is home to 370+ employees and onsite facilities including onsite parking, food hub and vending machines. All potential candidates should read through the following details of this job with care before making an application. Join our Transparencies team as a Principal Design Engineer and help drive innovative design solutions. We are looking for a Principal Design Engineer to join our Transparencies team to support a portfolio of new and existing programmes including Fast jet canopies, Helicopter Windscreens and Flight Deck Windows. ThePrincipal Design Engineer is a technical authority within the Transparency Systems team, responsible for leading complex product development, driving technical strategy, and ensuring engineering excellence across multiple programmes. It spans the full lifecycle: advanced concept development, requirements definition, geometric design, materials and process selection, supporting tooling design, manufacturing development, qualification, and in service support. ThePrincipal Design Engineer also plays a major role in shaping technology roadmaps, mentoring engineering teams, and representing the business in high-level customer, regulatory, and airworthiness discussions. This role requires flexibility for occasional travel, both within the UK and internationally. Core operational hours at our Luton site are: 07:30 - 16:30 Monday to Thursday & 07:30 - 12:30 Friday. Job Responsibilities Act as the technical authority for transparency design across multiple programmes, ensuring design integrity, safety, and compliance with customer, regulatory, and airworthiness requirements. Lead the definition of design standards and engineering best practices for transparency systems and approve design solutions, specifications, concessions, rework schemes, and compliance documentation. Provide expert guidance on requirements management, materials selection, structural performance, optical performance, manufacturing processes and qualification methods. Represent Design function in MRBs and serve as the primary escalation point for all MRB-related queries, exercising technical authority to determine and approve the disposition of non conforming parts. Define and validate test methods and/or alternate means of compliance (analysis/similarity) as required to demonstrate design solution complies with requirements. Act as a senior technical interface with customers, suppliers, regulatory bodies, and internal stakeholders. Communicate complex technical information clearly to both technical and non technical audiences. Lead major technical reviews, gate reviews, and customer design reviews, ensuring high quality technical data and presentations. Identify, assess, and manage technical risks across programmes, proposing mitigation strategies and influencing programme direction. Support capability development within the Transparency Systems team including training, knowledge capture, and succession planning. You will contribute to the development of GKN as a 'Great Place to Work', aligned with the core principles - safe, innovative, open & honest, care & respect, and ownership. Profile description: What You'll Bring To help us make a difference, youll bring your passion and talent for what you do along with the following skills, experience, qualifications and attributes: Essential: Degree in Aerospace, Mechanical or similar Experience in Aerospace design / or Aerospace product development. Deep understanding of the full product lifecycle, design practices, manufacturing processes, and airworthiness requirements. Proven ability to lead complex engineering work packages and solve complex technical problems using evidence based, methodical approaches. Familiarity with digital engineering and model based design preferably using CATIA V5. Excellent communication skills, able to create clear, concise, and accurate technical content and present to senior stakeholders. Desirable: Expert user of CATIA V5 for complex modelling and drawing creation Chartered Engineer status (CEng) Experience working with defence customers and regulatory authorities. Experience in transparencies, composites, or specialist structures/ systems. This is a hands on role, and the work will entail a high level of collaboration with Manufacturing Engineering and Operations as part of an integrated programme team to ensure both technical and programme objectives are met. You'll have strong leadership qualities with experience mentoring and developing engineering teams. You should be adaptable in your approach to work, and be willing to understudy other team members in their areas of responsibility to ensure overall department objectives are met. As Principal Design Engineer, you will be naturally detail oriented and appreciate the need for procedural compliance to meet both regulatory requirements and maintain product safety. Your proactive nature will enable you to understand and adapt to new technology areas quickly. Your good communication skills shall enable you to confidently engage with a wide variety of internal stakeholders. You should seek to increase/deepen own technical knowledge through study, training, collaborative working and continual professional development. Note: Some GKN programmes are subject to regulatory restrictions which may impact certain nationalities. As part of the application process you will be asked to declare when applying for this role. The position requires UK National Security Vetting (UKNSV) Security clearance (SC) due to the nature and responsibilities of the work carried out. In order for us to obtain an SC you usually need to have been resident in the UK for a minimum of 5 years to current date (but we do assess each case individually). We offer: What We'll Offer Once youre on board youll get the following perks and benefits: Competitive salary dependent on experience The opportunity to earn up to 15% bonus Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis Life Assurance 8 x salary 185 hours holiday + bank holidays Income protection Shopping discounts Cycle To Work Scheme Employee Assistance Programme Virtual GP Clinic for you and immediate family Free onsite parking Local gym discount Free airport parking Enhanced family friendly leave A collaborative, dynamic working environment Join us and keep the world moving click on the link below to apply A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. xrnqpay We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology. ?

Position: Personal Tax Manager Increase your chances of an interview by reading the following overview of this role before making an application. Location: Luton Package: Up to £62,000, Hybrid working, 25 days plus BH, life assurance, and much more Working Hours: Full time, Mon-Fri, 9am-5pm A new opportunity is available within a highly reputable, growing, medium sized Accountancy Practice. This role involves managing a varied portfolio of private clients, including HNW individuals, trusts, and estates. This is a key role for the firm, offering responsibility, client exposure, and opportunities for progression The role is paying up to £62k, with hybrid working flexibility, extensive holiday allowance, life assurance, paid overtime, and much more. It is well suited to an experienced tax professional, with a passion within personal tax. If you are looking to take the next step within a truly progressive firm, then this is the role for you Personal Tax Manager Job Responsibilities Manage a diverse portfolio of personal tax clients (including HNWIs, directors, owner-managed businesses, trusts, and estates) and act as the primary point of contact for clients and advisers Build strong client relationships while identifying tax planning opportunities and supporting advisory and trust-related projects Oversee preparation and review of personal, trust, and estate tax returns, ensuring compliance with income tax, CGT, and IHT obligations Manage HMRC correspondence, enquiries, disclosures, and investigations, ensuring deadlines and budgets are met Provide technical expertise across personal tax, trusts, estates, and residency matters, including research and interpretation of legislation and HMRC guidance Support advisory work on trust structures, succession planning, and communicate legislative updates to clients and the team Lead, supervise, and develop junior staff, including workflow planning, reviewing work, and delivering training Ensure compliance with professional standards and internal procedures, maintaining accurate documentation and supporting quality assurance initiativesPersonal Tax Manager Job Requirements CTA qualified, or ACA / ACCA qualified with significant personal tax and trust experience Strong experience within a UK accountancy or tax practice Good technical knowledge of UK personal tax, trust, and estate taxation Experience managing a personal tax and trust client portfolio Strong organisational and time management skills Familiarity with personal tax and trust software such as CCH, IRIS, TaxCalc, or similar, is desirablePersonal Tax Manager Salary & Benefits Salary ranging from £51,000 - £62,000 depending on experience Flexible working, along with hybrid arrangements for qualified staff members Annual leave starting at 25 days (plus statutory bank holidays) Holiday purchase scheme We offer paid overtime - rare in our sector we know! xrnqpay A group income protection insurance scheme Life assurance at four times basic annual salary Auto enrolment pension scheme Employee Assistance Programme for challenging situations whether they be personal or work related Full study support for professional qualifications where relevant Professional subscriptions fees paid Onsite parkingBennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for

Vehicle Technician Location: Dunstable Salary: up to £55,000 basic per annum Hours: 5-day working week Ref: 29950 We have a new vacancy for a Vehicle Technician for my clientsindependant sitein Dunstable. They have a large workshop and need a Vehicle Technician to join a high-performing team. This role suits a Vehicle Technician looking for a long-term role. The site has a really good atmopshere, good environment to work and excellent staff retention. Company Benefits: 33 days annual leave (including bank holidays) Pension scheme Family-friendly policies A wellbeing programme to support you and your family Retail discounts and Car discounts for new and used purchases and servicing Vehicle Technician Role: Vehicle servicing & general maintenance. Vehicle Diagnostics. Brakes, suspension, clutches. Vehicle Technician Requirements: Minimum 2 year's experience in a busy workshop. You must be a Level 3 Vehicle Technician or equivalent to (City and Guilds). We may consider a candidate with a level 2 in Light Vehicle Maintenance Full UK Driving License. Consultant: Jason Evans - Octane Recruitmen t JEVT Octane Recruitment is a specialist Automotive and Motor Trade recruitment agency, working with main dealerships, bodyshops, tyre management companies, parts distribution centres, independent garages, fleet operators, HGV companies, import centres and manufacturers across the UK. We recruit across the motor trade and related industries. TPBN1_UKTJ

Deputy Service Manager When registering to this job board you will be redirected to the online application form. Please ensure that this is completed in full in order that your application can be reviewed. Due to the nature of the service, it is an occupational requirement that the post holder is female and the post is therefore exempt from the provisions of the Equality Act 2010 in terms of Schedule 9, Part 1, and Paragraph 1 of the Act. Job Title: Deputy Service Manager Location: Based in Luton. Unfortunately this service has no step free access. Salary: £28,700 (Annual) Shift Pattern: Fixed Term Contract until March 2028working 37.5 hours per week Monday to Sunday on a rota which can vary between 08:00 - 16:00, 09:00 - 17:00, 10:00 - 18:00 and 12:00 - 20:00. You may be required to work outside these hours as per service and resident requirements and will include bank holiday working. You will also form part of the out of hours on call rota for managers. About the Role We are seeking a Deputy Service Manager to support the Service Manager in leading our residential based service which is based in Luton. Penrose Women's Luton SHAP support women who have experienced multiple forms of exclusion such as historical/ongoing abuse, involvement in the criminal justice system, mental health challenges, drug/alcohol dependency, and enduring high levels of violence and coercion. The team supports our women to create a safe, secure, and nurturing environment to create a space where they can call home. They provide person-centred care and support to help them overcome personal challenges and rebuild their lives for brighter futures. In this role, you will support in leading the team by providing overall leadership to the service and line management responsibilities to support, enable, and empower your team to deliver high quality support to our residents. You will support in driving service outcomes in line with contractual requirements, ensuring quality and consistency within a trauma and psychologically informed environment. You will ensure the service runs smoothly in collaboration with the team, wider teams, and external partners. We're looking for someone who is solution focused, has experience within a similar service environment, and can create a safe space for individuals to learn, and grow. Key Responsibilities Include: Line management and leadership, offering guidance and support throughout the employee lifecycle, fostering a supportive leadership culture focused on staff wellbeing, learning, and development. Encourage productivity, engagement, and wellbeing of the team through regular check-ins, training, meetings, and supervisions. Support with day to day tasks within the service, supporting the team to deliver the best possible outcomes with their residents. Ensure Risk Management processes and policies are followed within the service. Property and housing management, ensuring accommodation standards, timely maintenance and reporting. Striving to ensure excellence and quality in our service delivery. Financial Management of service budget with cost saving mechanisms. About You We're seeking someone who has a genuine passion for making a difference to lives, and helping to create safer communities for all. You will be a proactive leader, with the ability to motivate and empower a team to drive excellence, both as individuals, and as a team, whilst providing practical solutions to challenges which arise. You will be knowledgeable of the trauma and challenges that women face within the service including exclusion. We're looking for someone who can build rapport, trust, and create an environment which allows individuals to grow their skills and experience and develop as individuals. Due to the nature of the service, it is an occupational requirement that the postholder is female. Previous experience in supporting individuals in a similar capacity or managing a service which supports residents who have experienced multiple forms of exclusion such as historical/ongoing abuse, involvement in the criminal justice system, mental health challenges, drug/alcohol dependency, and enduring high levels of violence and coercion. Ability to provide high quality support and line management to staff. Ability to motivate and empower a team to achieve KPI's Ability to support the Service Manager and help manage staff with daily tasks, caseloads and overall day to day running of the service. Ability to provide advice, guidance, and support to the team on all aspects of service delivery including resident related queries. Ability to work flexibly to meet the demands and needs of the service. For example, Provide an emergency on call service as and when required in case of emergency. IT proficiency - we use various systems so look for someone who can learn and navigate new systems including case management, Microsoft, ATS, HR systems, and other types of organisational software. Alignment with our values of Ambition, Empowerment, Inclusivity, and Transparency. Please refer to the JDPS attached for more details on the vacancy and our requirements/key criteria. What we Offer 25 days (Full time equivalent) annual leave, increasing with the length of service Employer Pension Contribution Eligibility to register with Blue Light Discount Card Access to discounted tickets for music events, shows, sports and more Reflective Practice regular sessions with a therapist provided by an external provider to support Mental Health and Wellbeing at work Training and Development, including access to courses, upskilling, and progression plans Employee Assistance Programme, including counselling Life Assurance Scheme Cycle-to-work scheme Annual Staff Awards EDI Ambassador programme About Social Interest Group (SIG) SIG is a not-for-profit organisation providing thousands of people with good-quality support and care in residential, drop-in centres, community floating support settings, probation settings, and hospitals. We do so across London, Brighton, Bedfordshire, Luton, Kent and Liverpool. Our goal is to transform lives through empowering change. We believe good care and support improves lives with the vision to create healthier, safer, and more inclusive communities. Join us on our mission to empower independence through trauma-informed solutions and dynamic partnerships that keep people out of prison, out of hospital, and off the streets. Want to know how we work? Watch our short Theory of Change video to see how we support people towards a brighter future: Theory of Change Further details can be found on our website here: Theory of Change - Social Interest Group - Social Interest Group . Additional Information Please note that this job advert may close early due to screening applications on an ongoing basis. We advise applying as soon as possible for your application to be taken into consideration at the early stages. Unfortunately, we are unable to provide sponsorship, please ensure you have full right to work in the UK prior to applying to our positions. TPBN1_UKTJ