Trabajos industrial engineer en Reino Unido - Page 11

Mobile Commercial Pump Specialist We are seeking an experienced Commercial Pump Specialist (Mobile Engineer) to service, maintain, troubleshoot and commission pumping systems across commercial, industrial, healthcare, education and municipal sites. This is a senior, field‑based role for a hands‑on mechanical expert with strong diagnostic ability.The Role Service, repair and rebuild commercial pump systems (end suction, inline, split-case, vertical multistage, boosters, sump pumps). Diagnose mechanical and electrical faults in pumps, motors, seals, bearings, couplings & VFD systems. Carry out vibration analysis, performance testing & system optimisation. Complete seal replacements, impeller adjustments, motor alignments & pump overhauls. Support commissioning and start‑ups. Read and interpret technical drawings/schematics. Produce accurate service reports and parts lists. Provide clear customer communication and recommendations. Maintain tools, diagnostic equipment & company vehicle. Participate in on‑call rota as required.What You’ll Need 3–5+ years’ experience with commercial or industrial pumps. Strong understanding of pump curves, hydronic systems & mechanical seals. Experience with VFD-controlled pumping systems. Ability to fault‑find both mechanically and electrically. Confident working independently across multiple sites. Full UK driving licence.Preferred Mechanical engineering qualification or apprenticeship. BMS/HVAC experience. Manufacturer training or certifications. Safety training (OSHA/CSCS or equivalent).What We Offer Company vehicle Overtime & call-out premiums Training, development & manufacturer certifications Stable, long-term role with a leading building services providerAll offers are subject to pre-employment checks and a DBS check.If you have not heard from us within 30 days please assume that you have not been successful on this occasion. However, we encourage you to apply for future opportunities that match your experience and interests

Structural Investigation Data Analyst We are looking for a Structural Investigation Data Analyst to join our team at TRACE who has excellent technical report writing skills to deliver engineering-led insights for structural investigations and infrastructure projects. The role will involve interpreting GPR and NDT datasets. Ideally you will have GPR and NDT experience, if not we will provide training to get you up to speed. This is a fully remote position with no site-based work. You can be based anywhere in the UK or Europe. But must have the right to work in the UK. If you’ve also worked in the following roles, we’d also like to hear from you: Reporting Analyst, Engineering Data Analyst, Technical Analyst, NDT Data Analyst, Geophysicists, Civil Engineer, Geophysical Surveyor, Utility Surveyor, NDT (Non-Destructive Testing) Engineer / Technician, GPR (Ground Penetration Radar) Engineer, Geoscientist SALARY: £30,000 to £40,000 per annum + Benefits LOCATION: Fully remote position with no site-based work. You can be based anywhere in the UK or Europe. But must have the right to work in the UK. JOB TYPE: Full-Time, Permanent JOB OVERVIEW We have a fantastic new job opportunity for a Structural Investigation Data Analyst to join a specialist consultancy delivering advanced structural analysis and non-intrusive testing insights. As a Structural Investigation Data Analyst you will transform complex datasets from GPR and ultrasonic testing into clear, structured engineering outputs, supporting infrastructure and civil engineering projects. Working remotely, the Structural Investigation Data Analyst will collaborate with consultants and site teams to integrate multi-method data, ensuring accurate interpretation and high-quality reporting. This is a technically focused role offering the opportunity to work on complex investigations and contribute directly to engineering decision-making. ABOUT US TRACE is a specialist consultancy focused on advanced structural investigation and Non-Intrusive Analysis (NIA). We do not operate as a traditional survey company. Our focus is on delivering engineering insight, not just data. Our approach integrates: • Ground Penetrating Radar (GPR) • Ultrasonic testing and tomography • Magnetic corrosion mapping (iCAMM) • Targeted intrusive verification where required We work across a wide range of structures, including: • Bridges and highways infrastructure • Warehouses and industrial assets • Tunnels and complex civil structures • Reinforced concrete and masonry buildings Our deliverables are digital-first and interpretation-led, including: • High-quality CAD outputs • Mapped defects and structural features • Reports designed to support engineering decisions, not just record data We are a growing, technically driven company, building a reputation for delivering work that goes beyond standard industry outputs. DUTIES Your duties as the Structural Investigation Data Analyst include: • GPR Data Processing: Interpret and analyse Ground Penetrating Radar data for concrete structures, • NDT Analysis: Evaluate datasets from ultrasonic testing methods including pulse echo and tomography, • Technical Reporting: Produce structured reports, data summaries, and interpretation notes, • Data Integration: Combine multiple datasets into coherent engineering-led outputs, • Visual Outputs: Generate annotated scan outputs such as B-scans, amplitude maps, and depth slices, • CAD Support: Assist in producing CAD-based deliverables where required, • Collaboration: Work closely with consultants to align outputs with site conditions and objectives, • Data Interpretation: Translate complex or imperfect datasets into defensible conclusions, • Quality Assurance: Maintain high levels of accuracy, consistency, and attention to detail CANDIDATE REQUIREMENTS ESSENTIAL • Proven experience of technical report writing and structured documentation, • Strong ability to interpret complex datasets and produce clear outputs, • Excellent attention to detail and data handling accuracy, • Comfortable working remotely within a collaborative, digital team environment DESIRABLE • Previous experience in GPR data processing and interpretation within structural or concrete environments, • Experience with ultrasonic testing methods such as UPV, pulse echo, or tomography, • Experience supporting or producing CAD outputs, • Exposure to multi-method non-destructive testing (NDT) investigations, • Understanding of structural behaviour and common concrete defects BENEFITS • £30,000 – £40,000 per annum depending on experience • 25 days annual leave, plus bank holidays. • Fully remote working model • Opportunity to work on complex structural investigations • A technically focused role with clear impact on final deliverables • Opportunity to grow within a specialist, expanding consultancy NO AGENCIES PLEASE HOW TO APPLY To be considered for this job vacancy, please submit your CV to our Recruitment Team who will review your details. JOB REF: AWDO-P14541 This job is being advertised by AWD online on behalf of TRACE Structural Investigations

Senior Water Hygiene Engineer – Based in Kingston area. £30000-£36000 + Van + Training + Benefits Privately owned water consultancy is actively growing their water services team and currently require an experienced Water Hygiene Engineer ideally located in the West London area with the ability to cover this area plus Central London working on health care, education and office sites carrying out PPM and reactive work. Working to a 40-hour week, site access is normally expected by 8.00am, all staff will need to demonstrate a flexible approach to work to ensure client satisfaction and minimal impact and have a desire to pick up new water qualifications. The successful Water Hygiene Engineer will have experience in Closed Systems, TMV Servicing, Sampling/Temperature Monitoring, with knowledge of Cooling Towers being beneficial. The Water Hygiene Engineer will be provided with a van they can use for private use and receive a fuel card, PDA and mobile. The key element for this role is the opportunity to progress into risk assessing and pick up plumbing qualifications that you can take forward in your career. For more information, please email Nick Lewis with a copy of your CV and we will arrange an informal interview Keywords/Job Titles of Interest - Water Treatment Engineer, Water Quality Technician, Legionella Risk Assessor, Water Hygiene Technician, Environmental Service Technician, Water Compliance Technician, Legionella Compliance Engineer, Water Safety Technician, Water Monitoring Technician, Water Sampling Technician, Industrial Water Technician, Field Service Water Technician, Water Risk Assessor. Suitable Home Locations - Croydon, Sutton, Epsom, Kingston upon Thames, Wimbledon, Richmond, Twickenham, Bromley, Beckenham, Orpington, Lewisham, Catford, Dulwich, Streatham, Mitcham, Tooting, Clapham, Wandsworth, Redhill, Reigate, Dorking, Leatherhead, Crawley, Horsham, Guildford, Sevenoaks, Tonbridge, Maidstone

Senior Civil / Infrastructure Engineer London Salary: £50,000 - £60,000 Looking for a Senior Civil / Infrastructure Engineer role in London where your input is valued and your work has real variety? This is a chance for a Senior Civil / Infrastructure Engineer to join a leading consultancy with a strong reputation for technical quality, collaboration and long-term career development. Working from the London office, the Senior Civil / Infrastructure Engineer will support a wide range of development projects across the South East and wider UK. The Senior Civil / Infrastructure Engineer will be involved in residential, commercial, industrial and mixed-use schemes, from bespoke developments through to large residential sites. Key responsibilities * Deliver highways and drainage design from concept through to construction * Manage projects to programme and budget * Prepare and review drawings, calculations, reports and specifications * Support planning submissions including Flood Risk Assessments and Drainage Strategies * Coordinate with clients, architects and internal teams * Mentor junior staff and provide technical guidance * Carry out site visits and support project delivery Candidate requirements * Degree qualified in Civil Engineering * Consultancy experience as a Senior Civil / Infrastructure Engineer * Strong knowledge of S278, S38, S104, Manual for Streets, DMRB and drainage design * Experience with AutoCAD, Civil 3D, PDS, Site 3D, MicroDrainage or Flow * Chartered or near Chartered with ICE * Strong communication and client-facing skills In return, the Senior Civil / Infrastructure Engineer can expect hybrid flexibility, varied project exposure, a supportive team environment and a salary of £50,000 - £60,000 plus benefits. Eligibility to Apply Applicants must already have the right to work in the UK. Sponsorship is not available. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience

We're looking for a Junior Fire Protection Engineer who's eager to learn and grow within a busy, supportive fire engineering team. You'll assist on a broad range of projects, from commercial buildings and warehouses to industrial sites, residential developments and defence facilities, and gain hands-on experience across all RIBA stages. Your work will involve helping produce drawings (AutoCAD/Revit), supporting design calculations, putting together reports and specifications, and joining site visits for inspections, testing and commissioning. Youll also get exposure to multiple fire protection system types and the chance to learn key standards and design methodologies. If you have around 2+ years' fire protection engineering experience, or perhaps you'e a mechanical design engineer with some exposure to this work, and want to accelerate your career on varied, global projects, this role offers a fantastic development pathway, hybrid working and a good salary plus benefits. Eden Brown is committed to equality in the workplace and is an equal opportunity employer

My client, a market leading Sustainability and Building Services Consultancy who specialise in MEP Design, Passivhaus and sustainable builds, is searching for a Senior Building Physics Engineer to join their team in Birmingham. As a Senior Building Physics Engineer, you will have the chance to work with an experienced team who specialise in thermal modelling and operational energy for bespoke builds, major housing developments, commercial developments and mixed-use tower blocks. You will deliver energy efficient solutions to reduce carbon emissions for many clients across the UK. Candidates are required to have a BSc and/or MSc in Sustainability, Energy, Building Services or Building Physics Engineering and experience working for a UK based Consultancy specializing in Energy Modelling using IES, thermal load calculations, Energy Audits and Energy Statements. Candidates are also required to have experience of thermal comfort analysis, passive design analysis and Overheating Assessments (Part L and Part O). Applicants are ideally required to have an EPC level 5 Assessment qualification and have experience of liaising with contractors, designers and clients to discuss project designs. As a Senior Engineer, you will complete thermal modelling for varied building services projects for a variety of sectors including commercial, residential and industrial sectors. You will have the chance to work with a friendly and supportive team and work with a variety of private and public sector clients to deliver energy efficient solutions. It is beneficial for applicants to have experience of BREEAM or NABERS UK and LCA Assessments using OneClick. You will also be required to complete; -Energy Modelling using IES VE. -Thermal Load Calculations. -Energy Audits. -Energy Statements. -Energy Performance Certificates. -Operational Energy Analysis. -Thermal Comfort Analysis. -Passive Design Analysis. -Overheating Assessments (Part L and and Part O) -Site visits to liaise with Clients and contractors when needed. This role offers a competitive salary, friendly and supportive team, hybrid working from the Birmingham office, site visits, flexible benefits and career progression. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment

This is an excellent opportunity to join an international defence aerospace company, working on cutting edge products within their manufacturing division. You'll provide Industrial Engineering support to manufacturing sites, functions and customers. The role requires a multi-skilled engineer to develop and drive innovation within manufacturing and wider functions from early customer engagement, through development to set-up and volume manufacture. The Role: You'll develop innovative solutions for new products or processes plus contribute to strategic roadmaps focused on factory capacity and investments through infrastructure improvement and expansion proposals, and planning the integration of new products, technologies, and equipment that create a competitive advantage.? Duties include: Support the development of new projects, technologies or businesses opportunities.? Analyse manufacturing system performance to evaluate and identify opportunities for improvement through Industrial Engineering tools, techniques and methods. ? Analyse and determine equipment, facilities and support requirements for new products, equipment or processes.? Provide detailed factory and line layouts using AutoCAD plus support the planning, costing and implementation of new or changed area.? Optimisation of assembly lines using workflow analysis, time and motion study, ergonomics and human factors analysis.? Provide detailed technical reports, presentations and information to support projects.? Provide analysis of current or future requirements using simulation tools, value stream mapping, data analysis, PFMEA, Lean Manufacturing and Six Sigma principles etc.? Collaborate with engineering and design groups to ensure producibility of product and effective transition to manufacture.? Your Skills / Experience: Degree in an engineering science e.g. Industrial Engineering, Electronics, Mechanical, Manufacturing Systems Engineering, or equivalent relevant experience?? PC literate mainly Microsoft Office including Word, Excel, PowerPoint & MS Project.? Proficient in the use of AutoCAD and/or simulation modelling tools. ? Ability to work with mathematical concepts and statistical analysis, SPC, modelling, queuing theory, Six Sigma, Lean Manufacturing, etc.? Ability to represent the company at all levels for internal and external customers.? Strong understanding of the key cost drivers in the set-up, development or support of projects, products and the manufacturing process. Desirable : ? Significant Industrial Engineering experience and extensive knowledge of Industrial Engineering tools, techniques and methods.? Experience of developing new process, areas or expansion including planning, costing and implementation. ? Ability to create detailed information quickly and present effectively at customer or various management levels.? Knowledge of SMT, units and box build plus site facilitation, supply chain requirements and material handling.? Ability to mentor or lead other engineers or projects with extensive Industrial Engineering knowledge.? Knowledge of simulation tools such as Witness or similar.? What's on offer: Competitive salary Company bonus scheme (discretionary). Relocation assistance if moving closer to site 25 days holiday + statutory public holidays, plus opportunity to buy and sell up to 5 days (37hr) Contributory Pension Scheme (up to 10.5% company contribution) 6 times salary ‘Life Assurance' with pension. Flexible Benefits scheme with extensive salary sacrifice schemes, including Health Cashplan, Dental, and Cycle to Work amongst others. A collaborative culture with career progression and pathways to help you grow. *This role requires a mid-level security clearance which requires 3 years' UK residency, with address history and references. TPBN1_UKTJ

As a Senior Mechanical Engineer, you will join a supportive team based in London to complete sustainable HVAC designs for commercial, healthcare, leisure, residential, and industrial warehouses across the UK. As Senior Mechanical Engineer you will be expected to complete detailed mechanical designs including heating, ventilation, plumbing and air-conditioning using AutoCAD and Revit. You will also be expected to complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, or Elite). • Prepare and review mechanical drawings, schematics, simulations and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. • Attend internal and client meetings to resolve design issues/queries and align project objectives. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role offers a competitive salary, flexible benefits and sustainable infrastructure projects across the UK. You will also have the chance to progress your career, mentor team members and have the option to manage the team. As a Senior Mechanical Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy completing detailed HVAC designs for ideally commercial and industrial developments using AutoCAD and Revit You are also required to have experience managing projects, mentoring team members and have a detailed knowledge PAS 1192-5 and other relevant codes. You will also be expected to have a keen understanding of BREEAM and net zero. If this role is of interest to you, please contact Jordanna Morris at Aztrum

Fixed Wire Testing Engineer South East region / London The Fixed Wire Testing Engineer uses their skills and experienced to ensures the safety and compliance of electrical systems and equipment at sites across London and South East region. They perform testing procedures as detailed in BS7671 Role Requirements • Have at least 2 years testing experience in Commercial and Industrial environments, • Spend the required 40 hours per week on site, • Qualified in C&G 2391 or 2394/95, • AM2 Qualified, • Holds Level 3 C&G 2360, 2330 (or equivalent) in Electrical Installations, • Qualified in C&G 2382, 18th Edition, • Possesses a full, valid driving license, • A willingness to work flexible hours and travel to site The role: • Submit reports (EICR, Observations, Site Audit Pro) to the required standard, • Complete Thermal Image Reports, • Complete Emergency Light testing and submit reports, • Be available to works a reasonable amount of weekends throughout the year, • Be available to work outside of core business hours as required by the Company, • Organise and liaise with site contacts to ensure works are completed as specified, • Works to be completed within the required time and budget, • Complete any other tasks (Remedial Works etc) as required by the Compan What’s on offer: • Competitive Salary, • Performance Bonus Scheme – earn extra pay on top of your salary, • Modern Company Van, • Staying Away allowance, • Training & upskilling – We provide full training and resources to help you develop your skills

Our OEM Client based in Gaydon, is searching for a Vehicle Efficiency Integration Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of 31st March 2027. Umbrella Pay Rate: £27.03 per hour. Duties: Reporting to the Vehicle Architecture's Efficiency Product Owner and working within the JLR Agile operating model, responsibilities will include: Conducting strategic target setting for the Vehicle Efficiency attribute (including competitive positioning assessment & benchmarking, assessment of fleet compliance requirements, customer feedback data analysis, real-world customer data analysis, reviews of legislative requirements etc). Coordinating and contributing towards Vehicle Efficiency attribute virtual verifications and data analysis. Conducting target compatibility assessment and negotiation between the Vehicle Efficiency attribute and vehicle energy node owners. Collaborating with energy node owners in influencing and defining strategic technology roadmaps compatible with Vehicle Efficiency attribute requirements and customer trends. Supporting effective Vehicle Efficiency attribute governance throughout vehicle programmes, identifying and making recommendations for how to handle risks and opportunities as they arise. Ensuring Vehicle Efficiency attribute and energy node assumption data is robustly and efficiently administrated and made available to business stakeholders. Collaborating with tools and methods teams to ensure Vehicle Efficiency attribute development requirements are well defined and aligned with programme objectives. Where programme delivery imperatives allow, contribute and add value to tools and methods development project work. Undertaking any other work as directed by their line manager in connection with their job as may be requested. Skills Required: Strong technical engineering background with evidence of a methodical, structured approach to problem solving. Experience of Vehicle attribute and/or vehicle system delivery. Knowledge of vehicle efficiency legislative homologation/certification methods, processes and implementation. Technical understanding of how vehicle energy nodes (road load, propulsion efficiency, electrical loads etc) affect vehicle-level efficiency and driving range. Strong presentation skills with the ability to use data and visualisations to articulate complex risks, opportunities and recommendations in an easily digestible way. Good communication skills, with the ability to simplify and articulate complex technical subject matters. Self-motivated and independent, able to work and deliver value autonomously within JLR's Agile operating model. Well-organised and diligent, able to keep a handle on technical administration. Education Required: Educated to Degree level (ideally with a focus on Mechanical or System Engineering) with significant relevant industrial experience. Additional Information: Hybrid working is a possibility. Minimum requirement of 2 days a week in the office but as and when business requires. TPBN1_UKTJ

Field Service Engineer A specialist engineering provider is seeking a Field Service Engineer to install, service and maintain gas monitoring and control systems across commercial and industrial sites. This is a mobile role covering locations throughout the UK. Key Responsibilities for the Field Service Engineer: * Installation, servicing and maintenance of leak detection and monitoring systems * Fault finding, testing and commissioning of equipment, including alarms and communications * Control panel wiring, on-site modifications and technical troubleshooting * Planned preventative maintenance visits * Providing basic system training to customers on-site Typical environments include installations for supermarkets, food production sites, cold storage facilities, commercial premises and many more. Candidate Requirements for the Field Service Engineer: * Field-based engineering experience with electro-mechanical equipment * Basic electrical knowledge * CSCS card * Strong fault-finding and problem-solving skills * Good IT skills and clear communication Desirables for the ideal Field Engineer: * 17th or 18th Edition electrical qualification * F-Gas certification * Experience in monitoring systems Package & Benefits for the Field Service Engineer: * Permanent, long-term role * Full product training provided * Company vehicle and specialist tools * Monday to Friday working pattern * Paid travel time, expenses and optional overtime * Pension scheme and generous holiday allowance If you feel this role is a good match to your skillset and experience then please get in touch today

Job Title: Intermediate/Senior Mechanical Engineer - 12 Month Contract or Permanent Location: Mostly remote (occasional travel to London) Contract Rate: £45-£53 per hour outside IR35 or Permanent Salary: £50-£60k About the Role: We are seeking an experienced Mechanical Engineer to join a dynamic team focused on innovative engineering solutions in the water and environmental sector. This role offers the flexibility of primarily remote work, with occasional visits to the London office, and provides the opportunity to work on cutting-edge projects in a collaborative environment. Key Responsibilities: Design, develop, and optimise mechanical systems and components. Prepare detailed engineering drawings, specifications, and documentation. Work closely with project teams to deliver solutions from concept through to installation and commissioning. Support project planning, risk assessment, and troubleshooting mechanical issues. Ensure compliance with relevant industry standards, codes, and best practices. Requirements: Degree in Mechanical Engineering or related discipline. Proven experience in a similar intermediate to senior engineering role. Strong knowledge of mechanical design principles, CAD software, and mechanical systems. Experience working on projects in the water, environmental, or industrial sector is a plus. Excellent problem-solving, communication, and team collaboration skills. Benefits: Flexible working arrangements with mostly remote work. Exposure to high-profile and innovative projects. Supportive and collaborative team environment. To find out more, please contact Molly Brown. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Automation Maintenance Technician Hours: Full-time, 40 hours per week (rotating early, late & night shifts) Salary: £53,195 per annum + night shift allowance + weekend premiums Total earning potential: Over £60,000 per annum Location: Farringdon About The Role We're looking for an experienced Maintenance Engineers to join our clients automation team at their state-of-the-art mail centre. You'll help keep their cutting-edge sorting and parcel processing systems running smoothly through planned preventative maintenance, fault finding, and continuous improvement. This is a fantastic opportunity to join a major national organisation investing heavily in automation and innovation Job Summary As a key member of the engineering team, you'll ensure the reliability, efficiency, and performance of our automated systems through a combination of preventative and reactive maintenance enhancing our mechanical, electrical, and pneumatic systems Job Responsibilities Performing preventative, predictive, and corrective maintenance on automated machinery. Diagnosing faults and identifying root causes to minimise downtime. Carrying out continuous improvement initiatives to enhance equipment performance and reliability. Supporting Engineering Managers, Team Leaders, and Coaches through maintenance reports, fault logs, and data entry. Collaborating with operations teams to optimise automation outputs and performance. Taking ownership of Continuous Improvement projects from concept to implementation. Working both independently and as part of a team to achieve shared goals.Requirements We're looking for an experienced multi-skilled engineer with: A minimum Level 3 qualification (NVQ/ONC) in Electrical or Mechanical Engineering (or equivalent). Proven experience maintaining automated or mechanical systems in an industrial environment. Strong diagnostic and problem-solving skills. A solid understanding of Health & Safety legislation. Excellent communication and teamwork skills. A flexible approach to working hours and occasional site travel (full UK driving licence required)What We Offer Competitive base salary Night shift allowance and weekend premiums. 22.5 days annual leave (plus bank holidays). Defined contribution pension scheme. Ongoing training and development to support your professional growth. Be part of one of the UK's most significant automation and engineering transformation projects.How to Apply For more information on the role, or an informal discussion regarding opportunities we have available, please contact Why work with Proactive? Proactive Technical Recruitment is an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on LinkedIn and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role! Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

My client, a market leading Electrical and Mechanical Design Consultancy based in Central London is searching for an Electrical Design Engineer to join their team. This is an office-based role, offering varied residential and commercial projects. Hybrid working is available for experienced candidates. As an Electrical Design Engineer you will join a bespoke team based in Central London. You will be supported by an experienced team and have the chance to work on major commercial schemes including residential schemes, commercial developments and high-rise office blocks across the UK. As an Electrical Design Engineer you will be expected to complete detailed electrical designs using AutoCAD, Dialux and Amtech. You will also be supported to complete; -Design calculations for commercial projects. -Detailed designs of electrical systems and cabling for buildings (commercial and industrial). -Survey, tests and reports on existing installations. -Attend technical meetings with professionals and contractors. -Engineering calculations using Amtech, Dialux, Pro-Design or equivalent software, -Preparing tender specifications and drawings for projects. -Train and support others when needed. This role offers a competitive salary, private healthcare and career progression. As an Electrical Design Engineer you are required to have a HNC/HND/BSc or MSc in Electrical Engineering or Building Services Engineering and have experience working for UK based Consultancy completing detailed electrical designs for residential buildings and commercial developments using Dialux or Amtech or an equivalent software. You are also required to have a detailed knowledge of BS7671 (wiring regulations) and other relevant codes. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment

Job Title - Electrical Project Engineer Duration - 6-8 Months Working Model - Hybrid (2 days per week in Central London) Hourly Rate - £35p/hour - £45p/hour Outside IR35 (dependant on experience) Project Engineer Overview My client is looking for someone to provide electrical engineering support on single point mooring projects for FPSO and FSO facilities, working within a small consultancy environment. The role focuses on preparing and reviewing technical documentation, supporting equipment specification, and coordinating with vendors and site teams to ensure smooth project delivery. The Project Engineer role will involve: Preparing and reviewing electrical technical documentation, including equipment data sheets Developing electrical load lists, cable sizing and voltage drop calculations Preparing and reviewing specifications for electrical equipment and switchboards Reviewing vendor documentation to ensure compliance with project requirements Liaising with vendors and supporting technical queries Coordinating with site teams and supporting project interfaces The Project Engineer will need to have the following attributes: Experience in oil & gas or petrochemical environments Around 5 years’ experience as an Electrical Project Engineer or in a similar role Good understanding of electrical systems and IEC 60079 Familiarity with industrial communication networks Strong Excel and Word skills Good verbal and written communication skills Ability to review technical documentation and work with vendors and site teamsDesirable attributes for the Project Engineer include: Experience with LV switchboard packages Experience working on FPSO projects Experience with single point mooring systems Experience working with classification societies Happy to consider an experienced candidate if it meets rate expectations. If you are interested in this position, please apply with an up-to-date CV, along with your availability and hourly rate expectations

Electrical Designer – London | Permanent | £60k-£80k Are you an experienced Electrical Designer looking for a role where your skills are genuinely valued? We are working on behalf of an established commercial building services business specialising in electrical design based in London, who are on the lookout for a talented designer to become a key part of their passionate team. If you enjoy working on varied, meaningful projects and want to be part of a business that takes real pride in the quality of its work, this could be the perfect next step in your career. The Opportunity This is a hands-on, end-to-end design role where you will be involved from early concept through to completion. You will collaborate closely with project managers, estimators, and installation teams, playing a central role in delivering high-quality electrical solutions across a range of commercial and industrial schemes. No two projects are the same, and you will have the chance to make a real impact on every one of them. Salary is dependant upon experience and qualifications. What You Will Be Doing Producing electrical designs, schematics, and detailed layout drawings for commercial and industrial projects Undertaking lighting and small power designs in line with current regulations and client specifications Completing cable calculations, load assessments, and circuit schedules Ensuring all designs comply with IET Wiring Regulations and all other relevant standards Collaborating with clients, consultants, and other disciplines to deliver fully coordinated design solutions Compiling technical submissions, design specifications, and supporting documentation Providing technical guidance and support to installation and commissioning teams on site Representing the business at design coordination meetings and client-facing discussions What We Are Looking For A proven track record as an Electrical Designer or Design Engineer within commercial building services Strong knowledge of electrical design standards and building services systems Confident use of AutoCAD and electrical design software including Amtech and Relux/Dialux A solid understanding of lighting design principles and energy efficiency standards The ability to read and interpret architectural and mechanical drawings A natural communicator who works well with others and can juggle multiple projects simultaneously Qualifications HNC/HND or Degree in Electrical or Building Services Engineering (or equivalent) City & Guilds 18th Edition (BS 7671) – desirable Additional design or CAD qualifications would be advantageous Why Apply? A permanent opportunity with a established contractor End-to-end project involvement from initial concept through to completion A varied portfolio spanning commercial and industrial schemes- no two projects the same Conveniently located London office near Liverpool Street If you are ready to take on a rewarding new challenge with a contractor who will appreciate everything you bring to the table, we would love to hear from you. Get in touch with Lewis today

Project Manager We are looking for a Project Manager/Engineer possessing at least 3- 5 years’ experience in the contaminated land, soil, ground, or environmental sectors. An attractive basic salary of c£45,000 - £55,000 is on offer, plus permanent benefits package which includes company vehicle, bonus and expenses. Our client has a strategy to grow significantly over the next three to five years and have an exciting opportuny for the right candidate to play a key role in realising this strategy. The successful candidate will have demonstrable experience and technical expertise in any area of this arena. You will work on multiple schemes simultaneously within various sectors, and your responsibilities will comprise of the management and delivery of projects, working within a multi-skilled team, conducting technical reviews, interpretative report writing, liaison and meetings with clients and regulatory authorities, and ensuring compliance with health and safety guidelines. The Person * You will ideally possess a relevant degree within the environmental or earth sciences field * You will possess 3-5 years’ experience within the environmental, remediation or contaminated land sectors * Ability to manage and deliver projects on time and within budget with a basic understanding of cost management at a site level * You will be expected to combine site work with office or home-based technical works, along with general project management and support with staff mentoring * Demonstrable site work competency including an appreciation of H&S requirements * Possess excellent interpersonal and communication skills, able to relate to people at all levels in an organisation, and establish and maintain respect professionally and personally * Familiarity with the relevant technical industry requirements or regulations * Excellent numerical skills including data interpretation, and a confident IT user The Role * Supervision of remediation and site investigations, soil sampling, contaminated land, and geo-environmental projects and sites * Collect and organise data to produce a variety of reports for internal management teams and clients * Safe, profitable and timely delivery and management of all assigned responsibilities on numerous sites and projects * Input to proposal writing, and interpretative reporting and report writing * Preparation of factual geo-environmental and interpretative contaminated land reports, including Desk Studies, Phase I&II Site Investigations and DQRA’s, as well as remediation strategies and verification reports * Ensure professional relationships (internal and external) are maintained to maximise the opportunity to successfully procure and profitably assist in the delivery of projects * To work and dispense your accountabilities as a Geo-Environmental Consultant proactively and effectively, helping to ensure that individual and team targets are achieved or exceeded Our Client Our client is a multi-disciplinary specialising in geo-environmental management, ground, soil, foundations verification and monitoring, remediation, ground / land / slope stabilisation and improvement, and contaminated land projects across the UK. They have an enviable reputation for the successful management of complex schemes for various clients in the construction, energy, rail, infrastructure, civil engineering and industrial markets, whilst also offering additional works such as the design and implementation of in situ remediation programmes for challenging brownfield sites. They also offer a wide range of soil and groundwater remediation treatments, and additionally the design of sustainable environmental based solutions to the public sector, property developers, construction contractors, and to the chemical and petrochemical industry. Their commitment to restoration and reinstatement works differentiates them from their competitors in the marketplace. We are committed to equal opportunities. We wish to ensure that all applicants are treated fairly and appointed solely on their suitability for the post irrespective of race, gender, age, disability, caring responsibilities, sexual orientation, marital / civil partnership status, religion / belief or nationality

The Role We’re looking for an HVAC Design Engineer to design and deliver efficient, cost-effective heating, ventilation, and air conditioning systems for commercial, and industrial projects. You’ll work closely with main contractor design teams, contractors, and project teams to turn concepts into buildable solutions. You will be eligible to work in the UK. The Company We’re a small, specialist mechanical services engineering company delivering Cat-A and Cat-B office refurbishment projects across the South-East. A large proportion of our work comes from long-standing repeat clients, and we take a practical, honest approach to Design & Build. We’re now looking for a Senior HVAC Design Engineer to take technical ownership of HVAC design on a part-time basis (3 days/week), with the option to increase days as workload grows. This role suits an experienced engineer who enjoys hands-on design, direct collaboration with contractors, and working without layers of bureaucracy. What You’ll Do Design and size HVAC systems (ductwork, piping, equipment, controls). Perform load calculations and energy modeling. Create drawings, specifications, and technical submittals. Ensure designs meet ASHRAE, CIBSE, and sustainability standards. Coordinate with other disciplines (structural, Space Planners and electrical contractors). Support installation, commissioning, and troubleshooting. Present concept design to all stakeholders and revise based on client-side feedback. What We’re Looking For Degree in Mechanical Engineering or related field. Significant UK commercial HVAC design experience Comfortable operating at senior / lead engineer level Strong knowledge of: VRF/VRV systems Chilled water system Heat recovery / low-energy solutions Proficient in AutoCAD and/or Revit Pragmatic, commercially aware, and confident dealing with clients and contractors What We Offer Competitive pay and benefits. Opportunities to grow and earn professional certifications. Remote working available Company pension Flexible working Paid travel Coordinate with other disciplines (structural, Space Planners and electrical contractors). Support installation, commissioning, and troubleshooting. Present concept design to all stakeholders and revise based on client-side feedback. What We’re Looking For Degree in Mechanical Engineering or related field. Significant UK commercial HVAC design experience Comfortable operating at senior / lead engineer level Strong knowledge of: VRF/VRV systems Chilled water systems Heat recovery / low-energy solutions Proficient in AutoCAD and/or Revit Pragmatic, commercially aware, and confident dealing with clients and contractors What We Offer Competitive pay and benefits. Opportunities to grow and earn professional certifications. Remote working available Company pension Flexible working Paid travel

HVAC Engineer Location: London - Mobile (Van) Hours of Work: Monday to Friday 8am to 5pm Job Overview My clients are seeking a skilled and experienced HVAC Engineer to join the team. The ideal candidate will have a strong background in Building Service Maintenance, with specific expertise in AHU Servicing. This role requires a full UK driver's license and 3-5 years of relevant work experience. Key Responsibilities Perform regular inspections, maintenance, and servicing of Air Handling Units in various commercial and industrial settings Diagnose and troubleshoot issues with AHU systems, including mechanical, electrical, and control components Carry out repairs, replacements, and upgrades to AHU equipment as necessary Conduct performance testing and optimization of AHU systems to ensure maximum efficiency Implement preventive maintenance programs to minimize downtime and extend equipment life Collaborate with other building service professionals to integrate AHU systems with overall HVAC and building management systems Maintain accurate records of all maintenance activities, repairs, and system performance Ensure compliance with health and safety regulations, as well as industry standards and best practices Provide technical support and guidance to junior team members and clients Stay updated on the latest AHU technologies and industry developments TPBN1_UKTJ

Senior Fire Alarm Engineer Central London & M25 £50,000 + Overtime + Electric Company Car + Full Benefits Package We are seeking an experienced Senior Fire Alarm Engineer to join a well-established and growing fire and security specialist operating across London and the M25. This is a fantastic opportunity for a skilled engineer looking to step into a senior-level role with excellent earning potential and long-term career prospects. The Role As a Senior Fire Alarm Engineer, you will play a key role in the delivery, maintenance, and support of fire detection systems across a varied client base including commercial, industrial, and high-end residential sites. Key responsibilities include: • Installation, commissioning, and servicing of fire alarm systems, • Fault finding and diagnostics on a wide range of systems, • Leading on-site works and supporting junior engineers, • Ensuring all works comply with current fire safety standards and regulations, • Completing accurate documentation and reports, • Providing high levels of customer service and technical support Requirements • Proven experience working with fire alarm systems in a senior or lead capacity, • Strong knowledge of systems such as Gent, Advanced, Kentec, Morley, or similar, • Familiarity with BS5839 standards, • Excellent fault-finding and problem-solving skills, • Strong communication and leadership abilities, • Full UK driving licence What’s on Offer • Basic salary up to £50,000, • Overtime available to significantly boost earnings, • Electric company vehicle, • Full benefits package, • Ongoing training and career development opportunities, • Stable, long-term position with a respected employer This is an excellent opportunity for a Senior Engineer looking to work on high-profile sites with a forward-thinking company

Automation Engineer (Sub-contract) V7 Recruitment is working in partnership with a well-established organization within the fire and security / access solutions sector. Due to continued growth and a strong pipeline of projects, we are looking to recruit experienced Automatic Door Engineers for service and maintenance work across Central London. The Role Work Type: Service & Maintenance Systems Covered: Automatic Doors: Swing, Sliding, Bi-Fold Industrial Doors: Roller Shutters, Sectional Overhead Entrance Systems: Gates, Barriers & Access ControlRequirements Proven experience in servicing and maintaining automatic doors, shutters, gates, and/or barrier systems Ability to fault find and carry out repairs independently Experience working on commercial or high-traffic environments Relevant industry qualifications (desirable but not essential): ADSA, DHF, ADIA, Gate Safe DBS check (or willingness to obtain)What’s on Offer Day Rate: £300 – £350 (depending on experience) Location: Central London Contract Length: Initial 6-month contract with strong potential for extension Working Pattern: Monday to Friday (overtime opportunities available) Payment: WeeklyThis is an excellent opportunity to secure long-term, stable work with a reputable client, offering consistent workload and the chance to work across a variety of high-profile sites. V7 Recruitment is an equal opportunities employer and does not discriminate on the grounds of age, disability, gender, gender reassignment, marriage or civil partnership, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. All applications will be considered solely on merit and suitability for the role. Please note that by applying for this position you are giving consent for V7 Recruitment to process and store your personal data in line with our Privacy Policy. We may contact you about this and other suitable opportunities. You can request your data to be removed at any time by contacting us

Civil Engineer / Senior Civil Engineer Location: London office Contract type: Permanent Salary: £30k to £45k pa depending on level and experience This is a great opportunity to join a growing infrastructure team delivering large-scale residential developments from concept through to construction as part of a supportive outgoing team? You will be part of a collaborative environment working closely with transport and flood risk specialists, contributing to schemes ranging from 100 units to multi-thousand dwelling masterplans, alongside a mix of commercial, industrial and energy projects. The role You will play a key part in the design and delivery of development infrastructure schemes, taking projects from feasibility through planning and into detailed design. Deliver drainage and infrastructure design across a range of projects Support senior engineers and take ownership of your own projects Produce and review drawings, calculations and technical reports Work across planning and detailed design stages Liaise with clients, authorities and internal teams Mentor and support junior engineers where appropriate What you’ll be doing Developing drainage strategies and detailed drainage designs Producing levels strategies and earthworks appraisals Preparing planning documents i.e. Flood Risk Assessments Supporting land due diligence and site appraisals Producing detailed design and construction drawings Securing technical approvals including S104, S38 and S278 About you Minimum of 2 years experience in a consultancy environment, working on residential development schemes is essential Strong technical understanding of drainage and highways design standards Familiar with relevant guidance such as Sewer Sector Guidance, Building Regulations, DMRB and CIRIA C753 Proficient in MicroDrainage/Flow and AutoCAD Working knowledge of Civils 3D or Site 3D would be beneficial Strong communication skills and a proactive, team-oriented approach Motivated to develop and progress your career What’s on offer Competitive salary plus paid overtime or time off in lieu Hybrid/flexible working 25 days annual leave plus bank holidays, increasing with service An annual tax-free bonus after 12 months (EOC) Discretionary performance based bonus scheme Private healthcare and life cover Plenty of training and development support Enhanced family benefits Paid professional subscription Cycle to work scheme, wellbeing perks, retail discounts etc. Regular social activities and events Paid volunteering time and STEM engagement opportunities You will be joining a business that invests in its people, values collaboration and offers clear progression within a growing, well-established team. Apply Today Contact Catherine on (url removed) or call (phone number removed)

Fire & Security Engineer (Fire Alarms, Access Control, CCTV & Intruder Alarms) – London - Basic Salary £28,000 - £48,000 Per Annum Package Overview: • £28,000- £48,000 (negotiable depending on experience), • Plenty of opportunities to increase earnings if wanted, • Company vehicle, pension scheme, fuel card, laptop & mobile phone, • Hours of work- Monday to Friday (40 hours a week), • Excellent progression and training opportunities, • Area covered – London, • Field based role covering a number of sites, • The work is strategically allocated based on each engineer’s location Company Overview - Fire & Security Engineer (Fire Alarms, Access Control, CCTV & Intruder Alarms) An excellent opportunity has become available within a well-established and highly regarded company in the fire and security industry. This growing organisation is recognised for its expertise in designing, installing, and maintaining cutting-edge systems for clients across commercial, residential, and industrial sectors. You will join a supportive and collaborative team that values quality and teamwork. Work is carefully planned and allocated based on each engineer’s strengths and location to ensure high standards and efficiency. The role comes with full training, ongoing support, and the tools needed to carry out your work effectively and confidently. Fire & Security Engineer (Fire Alarms, Access Control, CCTV & Intruder Alarms) Role and Responsibilities: • Install fire alarms, CCTV, access control, and intruder alarm systems in accordance with industry standards and client specifications., • Perform regular servicing, testing, and preventative maintenance on fire and security systems to ensure optimal performance., • Diagnose and resolve faults, ensuring systems are fully functional and meet safety regulations., • Carry out system upgrades or modifications to meet client requirements and comply with updated standards., • Complete and maintain accurate records, including service reports, installation certificates, and maintenance logs., • Work closely with team members and other trades on-site to ensure seamless project delivery. Fire & Security Engineer (Fire Alarms, Access Control, CCTV & Intruder Alarms) Skills & Experience: • Strong technical knowledge of fire alarms, CCTV, intruder alarms, and access control systems., • Excellent fault-finding and problem-solving abilities., • Ability to interpret technical drawings and specifications., • Good understanding of British Standards and industry regulations., • Ability to work independently and as part of a team., • Strong organisational and time management skills., • A methodical and detail-oriented approach to work., • A commitment to health and safety practices., • Proven experience in the installation, maintenance, and servicing of fire and security., • Previous experience in both domestic and commercial environments is advantageous. Why apply for this role? • Excellent training and development opportunities., • Plenty of opportunities to increase your earnings., • Excellent work life balance., • Supportive work environment., • Carefully planned out work schedules., • Opportunities to train in other areas across the business. DON'T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful. Industry Key Words: Installation Engineer, IP, Integrated Security Systems, Maintenance Engineer, Service Engineer, Repair Engineer, Fire and Security Engineer, Security Engineer, Commissioning, Fire Alarm, Security Systems Engineer, Fire Extinguisher, Emergency Lighting, Nurse Call Systems, Security Systems, CCTV, Close Circuit Television, Automatic Number Plate Recognition, ANPR, Access Control, Door Entry, Life Safety, Health and Safety, Intruder Alarm, Hikvision, Dahua, Qvis, Galaxy, Texecom, Scantronic, Paxton, PAC, Net2, Wisenet, Morley, Advanced, Kentec, C-tec, Gent, Hojicki, HiFire, Pelco, Menvier, Concept Pro, Haes, Fermax, Videx, ACT, Avigilon, Lenel C-Cure, Notifier, Site Survey, Security System Design, Electrical Engineer, IP Networking, PPM, Preventative maintenance, BAFE, FIA, ECS Card, System Upgrades, Commercial, Residential, Industrial, Site Surveys, Control Panels, System Commissioning

Mobile Plant Electrician FieldBased UK Wide Regular Staying Away £50,000 £60,000 basic salary Overtime Company Van & Tools 9% Pension Private Healthcare We are a market leader in the design and manufacture of heavyduty hydraulic presses and shears for the metal recycling industry. Our machinery combines diesel engines, electric motors, highpressure hydraulic systems, and advanced electronic control systems. Due to continued growth, we are recruiting an experienced Mobile Plant Electrician to join our UK field service operation. This Mobile Plant Electrician role is ideal for someone comfortable with regular travel, staying away from home, outdoor working, and the physical demands of heavy plant environments. The Role Mobile Plant Electrician As a Mobile Plant Electrician , you will carry out electrical faultfinding, repair, installation, and maintenance on complex mobile and static plant equipment at customer sites across the UK. The Mobile Plant Electrician position involves regular overnight stays , working outdoors in all weather conditions , and operating in industrial and recycling environments. The role is handson and will involve manual handling and some heavy lifting alongside technical electrical work. You will work across electrical and control systems ranging from 3phase AC power down to lowvoltage DC circuits and voltage control modules , supporting breakdowns, servicing, and upgrades. Key Responsibilities Electrical fault diagnosis, repair, and commissioning as a Mobile Plant Electrician Working on 3phase AC systems, DC voltages, and voltage control modules Faultfinding on electrical control panels, wiring looms, sensors, and actuators Supporting equipment powered by diesel engines and electric motors Assisting with electrohydraulic fault diagnosis on heavy plant machinery Performing repairs, upgrades, and routine maintenance to OEM standards Dismantling, repairing, and refitting heavy components using specialist tools Working safely on customer sites, often outdoors and in demanding environments Completing service reports and maintaining professional customer communication Skills & Experience Required Proven experience as a Mobile Plant Electrician , Plant Electrician, or Field Service Engineer Strong handson knowledge of: 3phase electrical systems DC electrical systems and control modules Electrical schematic interpretation and diagnostics Experience working on mobile plant, heavy machinery, or industrial equipment Comfortable with regular staying away from home , outdoor work, and physical tasks including heavy lifting Knowledge of electrical control systems (PLC or CANBus experience advantageous) Ability to work independently in a mobile, fieldbased role Full UK driving licence Electrical or engineering qualification, or timeserved / QBE background Whats on Offer £50,000 £60,000 basic salary , based on experience 40hour week paid doortodoor Overtime paid in addition to basic salary Company van, tools, and specialist equipment provided 9% employer pension contribution 25 days paid holiday plus bank holidays Private healthcare Death in service insurance Ongoing training and longterm career progression INDKA TPBN1_UKTJ

Role: HGV Trainee Tanker Drainage Engineer (No Drainage Experience required, Full Training Provided) Salary: £37,000 Location: Dartford & Surrounding areas Hours: 50 hours per week, will consist of nights and early mornings. Looking for someone who is happy to work weekends. Overtime and on call available. Attega Group is looking for a HGV Trainee Tanker Drainage Engineer to join the reactive team for a large successful Drainage company based in Dartford area. The HGV Trainee Tanker Drainage Engineer will be operating across Leigh and surrounding areas, you'll visit various client sites, including industrial estates, retail parks, shopping centres, and office buildings to conduct drainage works for both planned maintenance and emergency response. We value your expertise, and in return, we offer a competitive salary of £37,000 per annum, while going through training. Furthermore, there is tremendous potential to earn £50,000+ through overtime, along with an attractive benefits package. Flexibility is key to success in this role, as you will need to accommodate early morning starts (e.g. 2am/3am/4am) and occasional overnight stays away from home. We take care of your accommodation expenses during these trips and provide you with a budget for meals. What you can expect from us: Full-time position with ample overtime opportunities Full Training provided Potential to earn £60k+ through overtime 24/7 worldwide personal accident insurance Company pension scheme Additional bonus payments for on-call weekends Comprehensive training and personal development programs Employed on PAYE Monday to Friday, 50 hours per week, shifts include 4am - 12pm and nights 8pm - 4am as well as normal working day - weekend work also available. 28 days of annual leave (including bank holidays) The ideal HGV Trainee Tanker Drainage Engineer will hold their Class 2 and be willing to learn the Drainage industry including pressure jetting and operating a tanker. If this sounds interesting, please contact Hannah or apply here

Design Engineer Permanent; Full Time Kendal, Cumbria; site based with flexible working options Do you have experience designing mechanical products or assemblies? Have you used 3D CAD such as SolidWorks in a professional setting? Are you comfortable working with tolerances, drawings, and technical documentation? What's in it for you £31,248 to £42,456 depending on experience 10% employer pension contribution plus 4% employee 25 days holiday plus bank holidays; option to buy or sell additional days Flexible working Chartership support and ongoing professional development Cycle to work scheme Life assurance at 3x salary Access to occupational health and EAP What will you be doing? Interpret customer requirements and define design specifications Develop and validate pump designs for performance and durability Carry out tolerance analysis on assemblies Produce and maintain technical documentation and reports Create and modify 3D CAD models and engineering drawings Apply GD&T to ensure manufacturability and fit for purpose design Support prototype builds and testing activities Present design updates and solutions to internal stakeholders Where will you be doing it? Established engineering and manufacturing site in Kendal Working within a collaborative detailed design team Supporting global customers in power generation and industrial sectors Mix of new product development and ongoing project work What will you need? Degree in Mechanical Engineering or similar; or equivalent experience Experience with rotating equipment or assemblies Understanding of engineering design processes Strong 3D CAD capability; SolidWorks preferred Experience producing technical drawings and specifications Knowledge of tolerancing and GD&T Good communication and stakeholder management skills Organised approach with ability to meet deadlines Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here. TPBN1_UKTJ

Water Hygiene Engineer - London £28000-£30000 + Van + Overtime + Benefits Environmental Consultancy are expanding their London team and are looking for Water Hygiene Engineers to cover commercial projects in this region. Sites will include Education, FM, Industrial and MoD and will be part of a team of 8. To apply for the Water Hygiene Engineer post, the following experience is required: • Experience working as a Water Hygiene Engineer or Water Hygiene Technician, • Experience in the following duties, • TMV Servicing, • Sampling/Monitoring, • Descales, • Tank Cleans, • Maintaining site logbooks, • Full driving license The Water Hygiene Engineer will receive a full benefits package including van, phone, fuel card, unlimited overtime plus regional work. Training will cover all aspects of the water hygiene process but the big incentive for this role is the fact that every member of staff will receive a personal training program allowing them to move into account management or a supervisor role. For more information, please email Nick Lewis with a copy of your CV Similar Job Titles and Titles of Interest - Water Treatment Technician, Water Hygiene Technician, Legionella Technician, Maintenance Technician, Water Treatment Engineer Legionella Risk Assessor, Environmental Water Technician, Water Compliance Engineer, Water Safety Technician, Remedial Plumber, Water Softener Engineer, Field Service Technician, Water Services Engineer, Plumbing and Water Hygiene Technician. Commutable locations - London, Southend-on-Sea, Chelmsford, Colchester, Basildon, Harlow, Brentwood, Grays, Canvey Island, Dartford, Maidstone, Ashford, Canterbury, Gillingham, Chatham, Rochester, Gravesend, Sevenoaks, Tonbridge, Royal Tunbridge Wells, Reading, Slough, Windsor, Maidenhead, Bracknell, Newbury, Basingstoke, Southampton, Portsmouth, Winchester, Farnborough, Aldershot, Staines-upon-Thames, Uxbridge, Harrow, Twickenham, Woking, Guildford, Epsom, Redhill, Reigate, Camberley

Noble Recruiting have a wonderful opportunity for an experienced Mechanical Engineer based in Barking, Essex with an internal workshop and offsite/field work involved with Electrical non-live component duties. • Mainly working with industrial motor repairs, gearboxes, fitting pumps and air handling units., • Mechanical experience - Using lathe turners within the machine shop., • Candidates must come from an Electrical Engineering background, 18th Edition NOT required but hands-on working experience is! Salary is £40K pa with Overtime and earning normally £65K to £80K pa Benefits & Company details given at interview stage. Free parking on site. Important Notice: Noble Recruiting Limited, based in Billericay, Essex, is an equal opportunities employer. With over 17 years of industry experience, we specialise in both permanent recruitment and the provision of temporary workers. By submitting your application, you consent to the processing of your personal data by Noble Recruiting Limited. For further details on how we manage applicant data, please refer to our Privacy Policy available on our website. Application Status: Due to the high volume of applications received, we regret that if you do not hear from us within 14 days, your application has not been successful on this occasion

A well-established engineering business is looking for a Field Service Engineer to join their team covering the London region. The company supplies and supports industrial machinery and hydraulic equipment used by businesses across the automotive and engineering sectors. Due to continued growth and demand for their services, they are looking for a hands-on engineer to maintain and repair equipment at customer sites. The Role Service, maintain and repair industrial machinery and hydraulic equipment at customer locations Carry out fault finding, maintenance and installations Travel across the London Area, working independently on site Ensure equipment is operating safely and efficiently What They're Looking For Mechanical or electro-mechanical background Experience working with hydraulic equipment / mechanical systems Good attitude and willingness to learn Full UK Driving License What's On Offer Competitive basic salary Overtime paid at 1.5x (uncapped) Paid travel time Company performance bonuses Company vehicle, fuel card and expenses covered Flexible hours - 40-hour working week Join a growing company with an excellent reputation in the industry with further growth opportunities This is a great opportunity for an engineer who enjoys working on mechanical systems, travelling to customer sites and being part of a supportive and expanding business...

Sprinkler Service Engineer London Salary £Competitive + Company Van + Fuel Card The Client They are a leading provider of innovative fire safety solutions, specializing in the design, installation, and maintenance of advanced fire detection and suppression systems. With a commitment to safeguarding lives and property, the company delivers tailored, high-quality services across various sectors, ensuring compliance with stringent safety standards. Their expert team leverages cutting-edge technology to offer reliable, efficient, and discreet fire protection solutions that blend seamlessly into any environment. This role would suit a Service Engineer, Multiskilled Engineer, Commercial Sprinkler Engineer, Sprinkler Service Maintenance Engineer. They are growing our service department, who cover clients nationwide and pride ourselves on excellent service and delivery, after installation servicing is key to keeping our clients systems fully compliant and operational. Whether it is special risk, detection or any sprinkler system, we provide service and maintenance of systems combined with 24/7 emergency call-out. Responsibilities • Must have experience in servicing all types of the following valve sets - Wet, dry, alternate, deluge and pre-Action., • Must be able to carry out 5-point flow tests on sprinkler fire pumps and general service checks., • Sprinkler Installation Level 2 qualified would be desirable but not essential., • Plumbing / Piping Knowledge & fault finding on sprinkler systems – essential., • Previous experience gained within Commercial / Industrial buildings environment., • Experienced in small works install., • Understanding and exposure to reporting electronically., • Full driving licence, • DBS check, • Flexible approach to working hours and location, as will cover large area of the UK, • Ability to work unsupervised or in a team, • Professional, pleasant attitude and smart in appearance, capable of communicating diplomatically to strengthen customer relationships., • Polite communication skills and ability to know when to escalate problems, • IT literate as all jobs are booked on tablets, • Ability to problem solve and use own initiative when on site, • Be punctual and reliable, • Provide an excellent customer experience What you will receive from Argus Fire • Competitive salary, including overtime and callouts, • Life Insurance, • Company Vehicle, • Mobile Phone, • Fuel Card, • Work Tablet, • 25 days holiday, plus bank holidays, • Argus Fire branded clothing, • Core working days Monday - Friday (when not on call) This role would suit a Service Engineer, Multiskilled Engineer, Commercial Sprinkler Engineer, Sprinkler Service Maintenance Engineer For information on the role please call Giles Churchill – Director - Fire at Amida Solution on (phone number removed). I am available to book calls in from 8am to 8pm Mon to Fri & Weekends

Company Profile CBRE's Global Workplace Solutions (GWS) division delivers end-to-end facilities management, engineering services, project management, and workplace support. Our teams combine technical expertise with a commitment to service excellence, innovation, and compliance. Through our engineering talent, digital tools, and focus on ESG and sustainability, CBRE helps clients reduce risk, drive performance, and enhance the workplace experience for their people. Job Title: Multi-Skilled Engineer CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi-Skilled Engineer to join the team located in London. Our Multi-Skilled Engineers are key members of the on-site Facilities Management team, providing technical support to ensure our clients' buildings are safe, compliant, and operating effectively. With an electrical bias, you will take the lead on electrical maintenance tasks while also supporting mechanical and general building services activities. Role Summary: As a CBRE Multi-Skilled Engineer you will utilise your advanced skills to perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment and grounds. Working under limited supervision, monitors building system operations and performance. Utilising several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating and cooling. Carry out planned and reactive maintenance to M&E plant in line with statutory requirements and best industry standards. Complies with all applicable codes, regulations, governmental agency and Company directives related to building operations and work safety. Be an ambassador of the CBRE values and behaviours. Ensure a professional image of CBRE is presented to clients and visitors and ensure excellence in customer service is delivered and always promoted. Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodelling, HVAC, plumbers, and cleaning. Performs assigned repairs, emergency, and preventive maintenance. Completes maintenance and repair records as required. Responds quickly to emergency situations, summoning additional assistance as needed. Full JD can be provided upon application. Experience Required: Experience working in a Facilities Management/Maintenance Engineering role. Experience with Reactive and PPM (Planned Maintenance) A Degree/Qualification in either a Electrical or Mechanical discipline. Must demonstrate a strong sense of customer focus and commitment to continuous improvement

PH1921 – Fire Service Engineer – Fire and safety consultancy REWARDS: £41k-£45k - Basic Salary, £60K OTE, Car or car allowance allowance, Fuel Card LOCATION: London, Reading, Guildford, Luton, Chelmsford, Crawley Exciting opportunity to manage a Service Engineer team for a leading Fire and Safety company THE COMPANY: We are a Market leader in the field of Fire and Safety consultancy. We install and maintain fire systems for all types of commercial industries and provide innovative and market leading solutions in this area. Our services are cutting edge and provides our customers with the highest level of fire safety within their organisations. All of our customers are business customers – but span a wide range of different industry sectors including education, industrial, leisure, hospitality and healthcare. Service is a key focus within our organisation and has led to us supporting major multi-site national businesses across the UK. As a result, our service team, forms a significant part of our organisation. THE ROLE: This position involves responsibility for a portfolio of customers across a designated area. You will be responsible for visiting the clients on a regular, diarised schedule and to check and monitor their fire and safety systems. During these visits you may find areas of the systems that need to be fixed or update, and you will liaise internally to support with this and manage these projects to completion. Most of your weeks will focus around planned, scheduled visits – but you will occasionally be required to work on “Call out” and respond to any emergency situations which require a Fire Service Engineer. The role is paid “Door to Door” and also offers strong overtime and career potential. THE APPLICANT: We are ideally seeking to speak to candidates with a proven track record of team management of Fire Service Engineers. • Candidates must have a proven track record as a Fire Service Engineer., • Candidates must have hands on ability to understand and programme fire control panels., • Candidates must have experience working in a field based environment., • Candidates must be FIA Qualified

My client, a bespoke MEP and Sustainability Consultancy based in Central London is searching for a Mechanical Design Engineer to join their friendly team. This is a hybrid role, offering varied sustainable builds and high-end residential, commercial and industrial renovations across the South-East. This opportunity is available with a bespoke Consultancy who value family and a work-life balance. As Mechanical Engineer you will be expected to complete detailed mechanical designs including heating, ventilation, plumbing and air-conditioning using AutoCAD and Revit. You will also be expected to; -Complete 2D and 3D models, perform heat load calculations, duct sizing, pipe sizing, and equipment selection using relevant software (e.g., Revit, AutoCAD, HAP, or Elite). • Prepare and review mechanical drawings, schematics, simulations and technical specifications in accordance with building codes, sustainability goals, and project requirements. -Design to BIM level 2 in accordance with British Standards PAS 1192-5 -Collaborate with electrical, plumbing, and structural engineers to ensure coordinated MEP layouts and avoid design clashes. • Attend internal and client meetings to resolve design issues/queries and align project objectives. -Review designs submitted by the team and respond to RFIs (Requests for Information). -Site visits to monitor installation quality, verify compliance with original designs and highlight issues during construction. -Evaluate new materials and designs ensuring energy efficiency and cost-effectiveness. This role offers a hybrid, flexible working environment, a friendly and supportive team, travel expenses for business and career progression. As a Mechanical Engineer, you will be expected to have a BSc and/or an MSc Mechanical Engineering or Building Services Engineering and have experience working for UK based Consultancy completing detailed HVAC designs for residential and commercial developments using AutoCAD and Revit You are also required to have a detailed knowledge PAS 1192-5 and other relevant codes and have a keen understanding of BREEAM and net zero. Candidates are required to have a valid UK driving licence to visit sites. Part time options are also available. If this role is of interest to you, please contact Jordanna Morris at Aztrum Recruitment

Senior Mechanical Engineer Central London £65,000-£90,000 or Day Rate Negotiable (CIS/Ltd) 25-27 Days Holiday + Bank Holidays, Travel Paid etc. I’m currently working with several well-established Tier 1 MEP contractors across London who are looking to bring Mechanical Engineers and Senior Mechanical Engineers into their growing teams. These roles sit across a range of sectors including Data Centre's, Building Services, Commercial Developments, Industrial projects, Healthcare, Life sciences, and Residential. Whether you’re early in your career or already operating at engineer or senior engineer level, there are strong opportunities for progression and long-term development. The Role You’ll be joining a multidisciplinary engineering team, supporting the design, delivery, and coordination of mechanical systems across live projects. Depending on experience, responsibilities may include: Mechanical design of HVAC, heating, cooling, ventilation, and public health systems Producing and reviewing technical drawings, calculations, and specifications Supporting projects from concept through to construction and handover Attending site visits and inspections, reporting on progress and quality Coordinating with electrical engineers, architects, contractors, and clients Assisting with technical submissions, RFIs, and commissioning activities Ensuring designs comply with current regulations, standards, and best practice Supporting junior engineers and contributing to continuous improvement Full support, mentoring, and training is available, including chartership support where applicable. About You Degree-qualified in Mechanical Engineering (or similar) Experience within mechanical or building services engineering Comfortable using design software such as AutoCAD, Revit, Hevacomp, IES, or similar Strong communication skills and a proactive mindset Eligible to work in the UK Why Apply? Wide range of London-based projects across stable and growing sectors Clear career progression and professional development support Competitive salary and benefits packages Flexible working options with many employers Supportive, collaborative engineering environments This is a great opportunity for a Mechanical Engineer looking to take the next step, gain exposure to varied projects, or join a business that genuinely invests in its people. Apply through this advert or email me your CV directly to discuss current opportunities in confidence - (url removed)

Electrical Installation Technician (LV / Control Panels) £45,000 - £50,000 + Training + Progression to Approved + Overtime + Bonus + Enhanced Holidays + Company Benefits * Herefordshire (Site-Based / Nationwide Travel) Are you a qualified Electrician looking to take the next step in your career, with full support to become an Approved Electrician and gain your Inspection & Testing certification? You will be working on the installation of LV and ELV electrical systems across a range of industrial sites, including water and wastewater projects. This is a hands-on role involving cable installation, containment, and working from technical drawings, with regular travel and overnight stays required. The company is a highly respected electrical engineering specialist with a strong reputation in the industry and a growing pipeline of projects. They are committed to developing their engineers, offering full training towards Approved Electrician status and long-term career progression. This role would suit a qualified Electrician who is eager to develop their skills, gain further qualifications, and progress into a more senior, recognised position within the industry. The Role: Install LV and ELV electrical systems on industrial sites * Work from electrical drawings, schematics, and wiring diagrams * Carry out cable containment and armoured cable installations * Travel nationwide with regular overnight stays * Receive training towards Inspection & Testing (2391) * Maintain high standards of health & safety on site The Person: Qualified Electrician (Level 3 or equivalent) * Experience in industrial or site-based environments * Full UK driving licence If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. Reference Number: BBBH24544a Keywords: Electrician, Industrial Electrician, Trainee Approved Electrician, Electrical Installation, LV, ELV, Water Industry, Wastewater, Utilities, Electrical Engineer, Site Electrician, Cable Installation, Containment, Inspection and Testing Training We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

2391 Electrician (Test & Inspect Engineer) Location: HMP Pentonville (N7) Salary: £46,775.42 + an additional 5% basic salary in recognition of shift and weekend working Contract: Full Time - Perm (39 hours per week) We are seeking a dedicated Test and Inspect Engineer to join our team at HMP Pentonville a category B adult male prison. Join a team that is more than just a group of colleagues - we work Monday to Sunday as a supportive and driven family, working together to create a safe and nurturing environment. HMP Pentonville runs like a self-contained city, it takes hundreds of people to keep it functioning, and as the Facilities Maintenance Team we are committed and driving the smooth and safe operation, like a heart that pumps blood through the body, everything we do impacts every prisoner, employee, and visitor, and wider to the families and community. As a Test and Inspect Engineer you will have the opportunity to work alongside experienced and passionate colleagues who vary from Plumbers, Electricians, Carpenters, Painters, to Cleaners, and Administrators, and others, who are all dedicated to making a positive difference, providing a safe and secure environment for all. If you are looking for a role where you can use your skills to create a better future for others, we encourage you to apply for this compelling opportunity and join us in our mission to promote rehabilitation and positive change and be part of a team that truly makes a difference. We are a Ministry of Justice business and provide critical and time-bound services to HMPPS, and are looking for a Test and Inspect Engineer with a combination of the following qualifications and skills/experience: At least five years experience working as an electrician Two years experience working in a role as a test and inspection electrician or equivalent Experience working on commercial or industrial electrical systems and catering equipment Good working Knowledge of relevant health and safety requirements Strong communication skills Basic IT skills including knowledge of Microsoft Office Excel and Word Experience of working under pressure to tight deadlines C&G 2367 or 2357 (Electrical Installation) C&G 2391 - Electrical inspection and testing NVQ level 3 in Electrical Installations or equivalent 18th Edition Good Health & Safety knowledge. Excellent organisational, time management and people skills. If this sounds like you, we would like to hear from you! Explore a varied and rewarding career at GFSL. Welcome to careers at Gov Facilities Services Limited (GFSL). Joining us is your chance to help ensure prisons are secure and safe for prisoners and prison staff alike, and to play your part in helping prisoners reintegrate into society. Holidays are 25 days per year plus Bank Holidays, and a range of non-contractual benefits are provided. These range from Death in Service at 4x salary, to access to private GP consultations and an Employee Assistance Programme that offers counselling and information services for preventative care and to help employees in a crisis. There are also a range of financial reward mechanisms and access to retailer discounts. You will find a strong focus on safety, a supportive, inclusive workplace, a competitive benefits package, and real opportunity to build your skills and progress. Explore facilities careers where you can make difference. Pride In People. We're passionate about promoting greater diversity and creating a workplace and culture where all of our employees have a voice that is heard, feel a sense of belonging and are empowered to be their true selves. We recognise the value that every single employee brings to the organisation. Everyone's needs at work are different and we are committed to doing our best to satisfy these differences whilst ensuring consistency and fairness for all. We promise to champion diversity and inclusion with ongoing learning and training, as well as career progression opportunities for everyone. Future Plans. GFSL has been notified by it's shareholder (MOJ) that the provision of FM Services will in future be delivered by the private sector. This means that following a successful procurement process, GFSL's services will complete transfer to a private sector provider/providers no sooner than August 2027. Pride in People - Do the Right thing - One Team An ISO 9001 Certified Company TPBN1_UKTJ

Technical Sales Engineer – Aftermarket Water and Process Solutions £40000 – £55000 + Car or Allowance + Bonus | UK There comes a point where technical ability is no longer the question. Direction is. This is a move toward a commercial career, not away from engineering. This role is aimed at engineers who have already worked with customers and want to move closer to how business is developed, not just delivered. You will join a commercially active team operating across industrial water and process systems, with a clear path into a fully commercial role over time. From early on, you will be involved in customer discussions, account development, and live opportunities, working alongside an experienced senior sales manager. How this role builds your career • Exposure to customers across industrial and water treatment environments, • Involvement in developing relationships within an installed base, • Insight into how technical discussions translate into commercial outcomes, • Progression toward an independent, revenue responsible role What needs to be in place • Customer facing or commercial experience within engineering, • Ability to engage technical and non technical stakeholders, • Interest in how opportunities are developed and won Where this experience is built • 4 to 8 years within industrial water treatment, process chemistry, or similar, • Degree in Chemical, Process, Mechanical Engineering, or related, • Experience within water treatment environments, gained through equipment providers, service organisations, engineering projects, utilities, or similar process industries Package • £40000 to £55000 base salary, • Car or car allowance, • Bonus or OTE This is a move toward a commercial career, not away from engineering. Apply or get in touch for a confidential discussion

Site Engineer Mechanical Mechanical fitter £36.5K + Overtime, Electrician £42K + Overtime Preston Work on secure UK sites, gain top-tier technical skills, and take the lead on projects from day one. Looking for a role that gets you out on the road, hands-on with high-security installations, and offers proper training to boost your mechanical and electrical skills? At Rhino Doors, we give you all thatplus the chance to work on projects that most people never get to see. Why This Job Stands Out High-security, high-profile sites your work really matters Full training provided build specialist skills fast Lead small teams take control of the job and deliver results Travel the UK every week is different Supportive team work with people who get stuck in and have your back What You'll Do Youll install and maintain a range of specialist doors sliding, hinged, fire-rated, manual and electric. Most of the work is on-site, where youll follow technical drawings, use power tools safely, and make sure each job is completed to a high standard. Youll often lead or support a small team, so theres real ownership from the start. The role involves national travel, overnight stays during the week, and the occasional weekend. You need to live near our Bamber Bridge (Preston) depot, as there is no dedicated vehicle with this position, so the candidate will have to make their own way to the depot. What You Need Born in the UK with a full UK passport You must be able to obtain full Security Clearance (This includes having UK residential records for the past 5 years and UK employment records for the past 3 years) CSCS card (SSSTS if applying for a supervisor role) Willing to travel and stay away regularly Confident with both mechanical and electrical tasks (training provided) If You're an Electrician, You Also Need: NVQ Level 3 or equivalent City & Guilds 2391 or 2394/2395 ECS Gold Card (or equivalent) Experience with control panels and industrial wiring Bonus Skills (Nice to Have) Experience on secure or high-risk sites IPAF, PASMA, SSSTS Forklift or Telehandler licence Whats Next If you're ready to take on big projects, gain high-level skills and be part of a team that delivers real results, apply now. Wed love to hear from you. TPBN1_UKTJ

Senior Industrialisation Engineer Pitstone With significant investment being made at our Safran Electrical & Power site, now is an exciting time to join the team! As Senior Industrialisation Engineer, you will take ownership of industrialisation for new/modified products and manufacturing processes, ensuring production readiness, process validation, quality, rate, and cost requirements are met. Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with more than 110,000 employees and revenue of 31.3 billion euros in 2025, and holds, alone or in partnership, global or regional leadership positions in its core markets. Safran undertakes research and development programs to maintain the environmental priorities of its R&T and Innovation roadmaps. As Senior Industrialisastion Engineer, you will deliver industrialisation for new/modified products and manufacturing processes, ensuring production readiness, process validation, quality, rate, and cost requirements are met. You'll take ownership of, and champion, effective process development, DFM capability and efficiency throughout the entire product and process development lifecycle. We are expanding our Industrialisation team with many exciting new projects and products in the pipeline. Key responsibilities: Deliver the design, development and industrialisation of manufacturing processes, ensuring robust, capable and cost-effective production solutions Responsible for process performance and be the first point of contact to resolve technical issues on the production line Plan and execute manufacturing trials, including PPAP, FAI and industrial validation builds, supporting a successful transition to stable serial production. Act as project technical owner for defined work packages Lead issue resolution and structured problem-solving using methodologies such as 8D, root cause analysis and corrective/preventive action deployment. Share and develop best practices across the site and division as appropriate Apply company standards through full product & process lifecycleWhat You'll Bring Essential: Proven experience in a manufacturing environment, with hands-on experience with tooling, APQP & PPAP HNC/HND in Mechanical, Electronics or Production Engineering, or equivalent experience Ability to challenge design and manufacturing techniques to ensure DFM and DTC requirements are met Strong understanding of SPC and FMEA's Demonstrated experience of leading on process improvement activitiesDesirable: Working knowledge of legislative requirements including REACH and HSE Experience in building strong relationships within a supply base to develop solutions that work for all parties

Senior Mechanical Design Engineer - Building Services - 20% Bonus Central London Flexible Working Up to £75k + 20% Basic Salary Bonus, 28 days annual leave & Benefits About Our Client: Our client is a growing Building Services Engineering Consultancy located in the bustling streets of Central London. Established in 2020, They have quickly become a 10 strong team, delivering exceptional work through strong client relationships within the commercial space. They are currently seeking a highly skilled Senior or Principal Mechanical Engineer to join the design team. You will lead on two specific projects. One will be the creation of a new nightclub in a 1930's theatre. The other will be a fulfilment centre within a large industrial unit for a very well known sports brands. Besides these two specific projects the business is know for commercial office real estate and restaurants/bars. Collaborating with a small and dynamic team of design engineers, electrical engineers, and a BIM team, you will play a key role in supporting and leading MEP projects from a mechanical perspective. Unique Selling Points: • up to a 20% bonus on top of your salary based on performance and company performance rewarding your dedication and hard work. * Prime Central London Location: Experience the energy of London's vibrant central district, with its buzzing cobbled streets and endless entertainment options right at your doorstep. * 28 days annual leave + Bank Holiday Responsibilities: Your responsibilities will include leading feasibility and concept design stages through to RIBA Stages 3, 4, 5 & 6, working closely with architects, design teams, project managers, and clients. You will oversee the production of mechanical design schematics, designs, calculations, tender issue drawings, and technical schedules. Additionally, you will contribute to the development of our mechanical design standards and AutoCAD/BIM templates. To excel in this role, you should have at least 5+ years of experience as a senior mechanical engineer and have a strong track record of project delivery, working on projects from initial concept through to design completion and hand over. As part of our team, you will also be involved in mechanical surveys, energy and carbon analysis, consultancy, and troubleshooting. You will collaborate with clients and design teams to deliver energy-efficient, low carbon designs that meet regulations and best practices. Moreover, you will work on mechanical plant replacement projects, covering heating, ventilation, air conditioning, hot and cold water systems, above-ground drainage, controls, and more. In return, The business offer a highly competitive salary ranging from £55,000 to £75,000 per annum, depending on experience. Additionally, you will receive an annual performance bonus of up to 20%, with spot bonuses available. They provide 28 days of annual leave per year (exclusive of statutory holidays) and offer a company pension scheme and a cycle to work scheme. They also foster a flexible working culture, allowing you to achieve a healthy work-life balance. For more information get in touch and we can arrange a confidential conversation anytime to suit you. Your expert recruitment consultant is Jamie Wynne, call today on (phone number removed) or email (url removed) Eden Brown is committed to equality in the workplace and is an equal opportunity employer

Our client is a market leader in providing noise control products into the Commercial sector, specializing in the design and manufacture of noise control products with particular expertise in products such as Acoustic Enclosures, Acoustics Louvres and Attenuators. Our client is urgently looking for a CAD Acoustics Engineer to join their expanding team in Hertford. Requirements- * Commercial experience a CAD Engineer within sheet metal design or closely related product range • Postgraduate qualification or Institute of Acoustics diploma. * Some direct working experience of using AUTOCAD in a commercial environment. * Excellent communication skills. * High numeracy skills. * Ideally, up to knowledge and use of Solidworks, Revit or Inventor software. Duties- * Producing design drawings using AUTOCAD. * Inputting into design of power generation products and industrial silencers. * Liaising with sales staff, clients and other industry contacts. * Drawing up detailed schematics, layouts and documentation. This is a fantastic opportunity to join a reputable company with strong career progression; if successful you will join an dynamic team providing you the best in support and training. A competitive salary will be provided to reflect your background and experience, as well other company benefits and a friendly working environment. Interested in this or other roles in Acoustics please do not hesitate to contact Amir Gharaati on (url removed) or call (phone number removed). We have many more vacancies available on our website. This is a permanent role. Penguin Recruitment is operating as a Recruitment Agency in respect to this position

Mechanical Engineer Location: London Salary: £60,000 - £80,000 (depending on experience) About the Company A leading provider of technical, engineering and energy solutions across the UK, delivering complex projects with precision, innovation, and a strong commitment to safety and sustainability. The organisation operates across critical environments including healthcare, industrial, commercial, and energy sectors. The Role An opportunity has arisen for an experienced Mechanical Engineer to support the delivery of high-value M&E projects. You will be responsible for engineering oversight, project coordination, and ensuring technical compliance across all assigned projects. Working closely with the Project Manager, you will play a key role in solving complex engineering and operational challenges while ensuring projects are delivered efficiently, safely, and profitably. Key Responsibilities Plan and coordinate project activities to ensure efficient and profitable delivery Review designs, drawings, and specifications to ensure technical and regulatory compliance Lead technical checks, submittals, and plant/equipment procurement processes Monitor project progress, sequencing, and quality to meet programme requirements Support commercial activities including variations, subcontract orders, and cost reviews Build and maintain strong relationships with clients, consultants, suppliers, and subcontractors Coordinate with mechanical, electrical, and wider project teams for seamless delivery Oversee installation quality, zero-defects reporting, and commissioning readiness Ensure all activities comply with health & safety standards Prepare project reports and represent the business at key meetings Requirements Degree-qualified in Mechanical Engineering (BSc/BEng preferred) Strong technical experience in Mechanical Engineering project delivery Proven ability to review designs, ensure compliance, and support procurement processes Excellent communication and stakeholder engagement skills Strong organisational and time management abilities Ability to thrive in a fast-paced project environment Collaborative mindset with strong relationship-building skills High attention to detail with a focus on quality and safety Strong problem-solving capabilities What's on Offer Competitive salary of £60,000 - £80,000 Opportunity to work on high-profile, technically complex projects Supportive and collaborative working environment Career progression within a growing organisation Exposure to diverse sectors including healthcare, industrial, and energy For more information please contact Mitchell Rogers on (phone number removed) --- Fusion People are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. You'll find a wide selection of vacancies on our website

My client is seeking a passionate and driven Geothermal Systems Engineer to join theirsmall, dynamic team dedicated to designing low-carbon geo-energy structures adopting our USP, the Hiperpile. This role focuses on the development of Hiperenergy solutions and the integration of Hiper systems into a variety of applications including residential and commercial buildings, heat networks, data centres as well as large-scale infrastructure projects. Our work covers the disciplines of deep foundation and MEP design, installation and maintenance so a systems-thinking mindset and a willingness to engage with multidisciplinary challenges are essential. This position is ideal for an Engineer with 3–4 years of experience in geotechnical or energy engineering, and a strong interest in sustainability and innovation. Role Overview The Geothermal System Engineer will be responsible for designing, modeling, and optimizing geothermal heating and cooling systems for residential, commercial, and industrial applications. You will collaborate with cross-functional teams to deliver high-performance solutions that meet technical, environmental, and regulatory standards. Key Responsibilities Design and engineer geothermal systems, including ground-source heat pump configurations, loop fields, and distribution systems. Perform site assessments, feasibility studies, and energy modeling using industry-standard tools. Create detailed technical drawings, specifications, and documentation for installations. Conduct thermal response testing and analyze geological and hydrogeological data. Work closely with project managers, drilling teams, and construction partners throughout project life cycles. Ensure all designs comply with relevant codes, regulations, and sustainability objectives. Troubleshoot system performance issues and provide technical support during commissioning. Contribute to R&D initiatives to enhance system efficiency and innovation. Qualifications Bachelor's or Master’s degree in Mechanical Engineering, Environmental Engineering, Geothermal Engineering, or a related field. Experience in geothermal system design or HVAC engineering (GSHP experience highly desirable). Proficiency with design and simulation software (e.g., LoopLink, GLHEPro, AutoCAD, Revit, EnergyPlus). Strong understanding of thermodynamics, heat transfer, and fluid mechanics. Familiarity with drilling processes, ground-loop installation methods, and hydrogeology. Excellent problem-solving skills and the ability to communicate complex technical concepts clearly. Professional Engineering (PE) license or willingness to pursue one (preferred). What They Offer Competitive salary and benefits package Opportunities for professional development and certification A collaborative, environmentally driven workplace Flexible working arrangements Chance to make a real impact in the renewable energy sector

Our client, a leading global HVAC company is looking for a Refrigeration Engineer with a solid background in the commercial or industrial refrigeration industry to join their fantastic team. On offer: Competitive base salary of up to £50,000 per annum with an OTE of £60,000+. Including company van & door to door payment with extensive benefits: Private Medical Insurance, company bonus, death in service, enhanced pension, purchase additional holiday and fantastic career progression opportunities. Responsibilities • Using hand tools, fault finding, diagnosis and repairs of equipment, • Performing preventive maintenance and maintaining customer plant and equipment, • Attending breakdowns, • Participating in an on-call rota Essential Experience to thrive in this role • UK driver’s license, • F Gas qualified, • Commercial refrigeration background, • Chiller experience is desirable Due to the nature of the role, candidates must reside in UK. Please note our client cannot offer visa sponsorship for overseas candidates. If you are an experienced Refrigeration Service Engineer eager to work for a global leader, we want to hear from you! Apply now and take the next step in your career

Senior Chiller Engineer (Commercial/Industrial Cooling & Heating systems) - west London, UK (CANDIDATES FOR THIS ROLE MUST BE ELIGIBLE TO WORK IN THE UK WITHOUT THE NEED FOR SPONSORSHIP AND MUST BE ABLE TO TRAVEL FREELY IN EUROPE WITHOUT ANY RESTRICTIONS.) A new vacancy for a Senior Chiller Engineer (Commercial/Industrial) with European division of leading global manufacturer of high-efficiency heating & cooling products. Based at the company's offices in the west London area, the Senior Chiller Engineer (Commercial/Industrial) will be responsible for supporting its distributors, consultants and end users in the UK and across Europe. Candidates should have an engineering qualification in a relevant technical discipline, and at least 5yrs HVAC and Refrigeration experience related to chillers used for industrial/commercial cooling and heating applications. Key requirements: Technical qualification in relevant engineering discipline HVAC and Refrigeration engineering experience related to CHILLERS (ideally 5yrs+) Understanding of WATER SYSTEMS for cooling & heating applications Knowledge of heat pumps & water systems Strong communication skills Strong problem-solving skills Multi-tasking Knowledge of other European language(s) would be an advantage Business trips across Europe will be required occasionally

PSR Solutions are currently recruiting for an Associate Director role in London. This will be working for a well established contractor within the Rail, M&E and Civils experience. Key Responsibilities Leadership & Team Building Build, lead, and mentor a high-performing Electrical Engineering team. Foster a culture of technical excellence, innovation, and continuous development. Technical Oversight & Design Lead the design and assurance of complex electrical systems (LV/HV up to 33kV, lighting, CMS, SCADA, UPS, BMS, etc.). Ensure full compliance with safety standards, industry regulations (including BS 7671 and ATEX), and internal processes. Strategic & Operational Development Establish and enhance internal design capability, processes, and tools. Drive technical input into tenders, business development, and client engagements. Governance & Safety Oversee peer reviews, technical audits, and post-project learning. Support investigations and ensure engineering safety across all project phases. Continuous Improvement & Innovation Lead initiatives around BIM integration, compliance, sustainability, and digital engineering. Champion CPD, knowledge sharing, and the embedding of best practices. Skills & Experience Essential: Expertise across electrical design, process systems, hazardous area compliance, and BIM integration. In-depth experience in LV/HV systems, protective devices, control systems (SCADA, DCS, PLC), and power distribution. Strong leadership and mentoring skills with a track record of team and capability development. Clear understanding of CDM, DSEAR, and electrical safety legislation. Qualifications Essential: Degree in Electrical Engineering. Chartered Engineer (CEng) with a relevant institution (IET, IMechE, CIBSE). NEBOSH Construction Certificate. BS 7671 (18th Edition) & C&G 2391-52 (Inspection & Testing). Full UK Driving Licence. Competencies & Behaviours Decisive, adaptable, and collaborative under pressure. Excellent communication skills at all organisational levels. Strong client-facing ability-able to balance commercial and technical needs. Committed to mentoring, CPD, and national travel when required. Fluent in English (written and verbal); confident in technical reporting. Experience Required Minimum 15 years' experience in infrastructure or heavy industrial projects. Strong hands-on background as a Design Engineer, Project Engineer, and Commissioning Engineer. Ideally has worked across both contractor and client-side roles, with exposure to Network Rail CRE responsibilities

Job Title: Controls Engineer Salary: £40,000 - £50,000 Location: Belvedere About the role: We are seeking a qualified and motivated Control Engineer with proven experience in large power industry projects in the UK. This permanent role involves contributing expertise to the design, development, and implementation of advanced control systems for power generation projects, ensuring optimal performance and reliability. You will work closely with the Engineering Director on diverse projects. Key Areas of Expertise: Industrial automation, PLCs, and SCADA systems (Allen Bradley highly desirable). Control system design and optimization. Distributed Control Systems (DCS). Industrial Ethernet networks and topologies. Application of engineering and computing critical thinking skills. Key Responsibilities: Lead and collaborate on the design, development, and implementation of control systems for large-scale power generation facilities. Collaborate with multidisciplinary teams for integrated engineering solutions. Manage projects from initial design studies through electrical DC/AC design, panel manufacture, PLC software, and SCADA design/programming. Oversee testing, commissioning, and maintenance of control systems. Ensure compliance with industry standards, safety regulations, and client specifications. Engage with clients to understand needs and exceed expectations. Mentor junior engineers and contribute to knowledge-sharing. Qualifications and Experience: Degree in Electrical Engineering, Control Systems Engineering, Industrial Automation, Automation and Control, or a closely related field. Proven experience as a Control Engineer on large power industry projects in the UK. Strong technical knowledge of PLCs, SCADA, DCS, and industrial automation systems. Demonstrated ability to manage complex projects and deliver results in a fast-paced environment. Excellent communication skills and a client-focused mindset. If you feel this is the position you are looking for, please do not hesitate to apply or contact me on (url removed) or call (phone number removed) for more details. Alec Lintern Recruitment Consultant TDA Telecoms

1821CW Senior SI Engineer (Penketh) Join our dynamic team as a Senior SI Engineer and play a pivotal role in delivering innovative control systems that support vital infrastructure across the UK. Based in Penketh, this position offers an exciting opportunity to work on complex projects within the water, power, and environmental sectors, contributing to sustainable solutions that impact communities and industries alike. If you're passionate about engineering, thrive in collaborative environments, and want to make a meaningful difference, this is the role for you. What You'll Do: As a Senior SI Engineer, you will be involved throughout all stages of control projects—from design and development to testing and commissioning. You'll create intuitive PLC and HMI software, develop SCADA solutions for monitoring and control, and reverse engineer existing systems to produce accurate and detailed documentation. You will also mentor colleagues, share your expertise, and help foster a culture of continuous growth and improvement within the team. Required Skills: Proven experience with Siemens (and ideally Rockwell) hardware and software Strong background in water and wastewater treatment sectors Demonstrated success in delivering complex control projects Ability to interpret client standards and user requirements effectively Skilled in reverse engineering control software with precision Excellent communication, time management, and project coordination skills Commercial awareness with a focus on adding value Full UK driving license for flexible travel Nice to Have Skills: Experience with additional control hardware or software platforms Knowledge of cybersecurity practices for industrial control systems Previous involvement in multidisciplinary projects Certifications related to control system engineering or safety standards Preferred Education and Experience: Bachelor's degree in Electrical, Control, or Instrumentation Engineering or a related field Several years of hands-on experience in control system engineering, particularly in water/wastewater environments Other Requirements: Willingness to undertake occasional travel across UK sites Ability to work both independently and as part of a team to meet project deadlines Commitment to safety, quality, and continuous professional development Take the next step in your career and become part of a leading organization committed to innovation, sustainability, and a supportive workplace. Apply now and help us shape the future of essential infrastructure services! TPBN1_UKTJ