Programming jobs in RotherhamCreate job alerts

NTT DATA are seeking an experienced z/OS Mainframe Systems Programmer to work on major projects, in one of the largest z/OS Mainframe environments globally. The role involves upgrading and supporting the z/OS operating system and ISV products, mainly from IBM and Computer Associates (CA). • Upgrading, maintaining and supporting the z/OS operating system, • Upgrading, maintaining and supporting ISV products particularly from IBM and Computer Associates (CA), • Working closely with the other Engineering teams to ensure the systems that are built are stable, available, up to date and running as effectively and efficiently as possible, • Managing hardware and logical resources across LPARs:, • DASD and tape allocation via HCD/HCM, • LPAR configuration in HMC, • Security administration using RACF or equivalent, • Ensuring data integrity and swift recovery:, • DFSMShsm policies and recall management, • FDR/ABR for high‑speed backups, • FlashCopy or virtual tape replication for near‑instant restores, • Optimizing system throughput and response times:, • RMF and SMF report analysis, • OMEGAMON or BMC MainView dashboards, • WLM classification and tuning, • Configuring and supporting mainframe connectivity:, • VTAM and SNA definitions, • TCP/IP stack on z/OS, • OSA adapter and Coupling Facility communication, • Executing OS and product upgrades with industry‑standard utilities:, • SMP/E for PTF, APAR, and deliverable management, • z/OSMF workflows for streamlined maintenance, • Broadcom (e.g., Topaz), IBM, and BMC tooling for fix management and compliance reporting, • Multiple years of z/OS systems programming experience, • Strong Parallel Sysplex skills, • Proficiency with z/OS, TSO/ISPF, USS, SDSF, JCL, RACF, • Experience installing and maintaining IBM and CA products, • Deep mastery of z/OS architecture, including IPL procedures, JES2/JES3 configurations, Sysplex management, SMF data collection, and parmlib customization, • Proficient in writing and debugging system‑level routines and automation:, • Assembler for exits and control blocks, • REXX for scripting and batch utilities, • JCL for job submission, parameterization, and workflow control, • Analytical troubleshooting of abends, storage hangs, and performance anomalies using:, • Dump analysis with IPCS, • SLIP and trace tools, • System logs and console messages, • Ensuring data integrity and swift recovery:, • DFSMShsm policies and recall management, • FDR/ABR for high‑speed backups, • FlashCopy or virtual tape replication for near‑instant restores, • Knowledge of performance monitoring, networking, and mainframe connectivity, • Experience executing OS and product upgrades with industry‑standard utilities:, • SMP/E for PTF, APAR, and deliverable management, • z/OSMF workflows for streamlined maintenance, • Broadcom (e.g., Topaz), IBM, and BMC tooling for fix management and compliance reporting, • Project management and hardware refresh planning, including IPL scheduling, vendor coordination, and change‑control governance, • Ability to produce clear system diagrams, runbooks, and upgrade plans while collaborating with application, storage, networking, and security teams, • Strong documentation and communication skills, • Experience in banking or large installations preferred, • Confident, independent, able to contribute from day one, • Excellent problem‑solving skills and a true team player, • Availability for off‑hours support during software changes when required, • Staying current on IBM Redbooks, z/OS release notes, firmware updates, and attending vendor training or industry conferences Hybrid working: remote + on client site (Sheffield) You will enjoy a comprehensive, locally competitive benefits package. NTT DATA is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here. For Pay Transparency information, please click here. #J-18808-Ljbffr

Rate - Considering options up to £715 Umbrella We're seeking a talented and experienced Fullstack Engineer to join our team. As a key member, you will play a critical role in driving business growth and innovation by designing, developing, and deploying fullstack applications that optimise processes, improve efficiency, and minimise risk. In this role, you will have the opportunity to work on complex and challenging projects that have a direct impact on our business. You will collaborate with stakeholders across the organisation to identify business needs and develop technical solutions that drive results. Your expertise in fullstack development, data science, and financial markets will enable you to make a significant contribution to our team and help drive business success. • Develop and implement fullstack applications that automate and streamline processes, improving efficiency and reducing risk., • Develop and Manage backend systems primarily using Python, with additional capabilities in Java and other languages., • Design and implement core backend services and systems to serve other applications using high performance programming languages such as java., • Demonstrate a strong ability to understand and apply software architecture patterns, including microservices and event-driven architecture, to design robust and scalable solutions., • Work closely with cross-functional teams to design and implement solutions that meet business requirements and goals., • Communicate complex technical concepts to non-technical stakeholders, including business leaders and external partners., • Rapid response to issues as they arise, with the ability to drive quickly to the heart of an issue and propose appropriate solutions., • Manage work and processes across multiple sites., • Maintain discipline in coding practice while ensuring timely delivery of end solutions., • Proficiency in Python is required, with familiarity in other programming languages such as Java,, • C++, Go, Rust, and others being advantageous., • Strong understanding of software architecture patterns, including microservices and event driven architecture., • Familiarity with containerisation using Docker, and experience with container orchestration tools such as Kubernetes., • Strong understanding of software development lifecycle methodologies and experience with, • DevOps and CI/CD pipelines., • Familiarity with data science and analytics techniques, including machine learning and statistical modelling., • Experience with database management systems, including relational and NoSQL databases., • Experience with Dash or other UI frameworks is a nice to have., • The opportunity to work on complex and challenging projects that have a direct impact on our business., • A collaborative and dynamic work environment with a team of experienced professionals., • Opportunities for career growth and development, with a focus on continuous learning and improvement. #J-18808-Ljbffr

Albany Beck is a specialist Financial Services Consultancy helping institutions deliver complex change and transformation while building the internal capability to sustain it. We combine subject matter expertise with innovative delivery models that help clients scale efficiently, while offering meaningful, long-term career opportunities to our people. At Albany Beck, you’ll be choosing to work with an organisation that’s passionate about your development and committed to delivering meaningful outcomes for our clients. We are looking for a Senior Java Developer to join a high-profile platform engineering team within the bank’s Technology organisation. The team is responsible for developing and evolving a strategic internal platform that enables developers across the bank to deploy, host and run services through a consistent technology experience. Historically, the platform has been focused on supporting markets-based applications, but the organisation is now bringing together multiple platforms across the bank and rationalising them towards one strategic platform and one developer experience. This is a major investment area with an ambitious goal for the platform to become the primary hosting platform for the majority of the bank’s applications and services. You will be joining a team of around 18 engineers, with plans to grow to approximately 30 globally. There are opportunities for engineers based in both the UK and Poland. As a Senior Developer, you will have a hands‑on role in designing, developing and evolving the platform, working across a broad technology stack rather than specialising exclusively in a single programming language. • Develop and enhance core components of the bank’s internal cloud and application platform., • Build software that enables developers across the organisation to deploy and host services efficiently., • Contribute to the integration and rationalisation of existing platforms into a strategic, unified platform., • Help maintain and evolve the platform for existing tenants while supporting the wider transformation programme., • Work across multiple layers of the technology stack, from infrastructure and operating systems through to core platform services and user-facing interfaces., • Design, develop, test and deploy high-quality production software., • Collaborate with engineers, architects and technology teams across the bank., • Troubleshoot complex technical issues across application, platform and infrastructure layers., • Contribute to technical design decisions and help shape the future architecture of the platform., • Support engineering standards, automation, reliability and continuous improvement., • Take ownership of technical problems and deliver pragmatic, scalable solutions. We are looking for experienced, hands‑on software engineers who are comfortable working across a broad technology landscape. • A broad understanding of software engineering rather than being narrowly focused on one language or technology., • Strong Linux/Unix operating system knowledge., • Experience developing and supporting production‑grade applications and platforms., • Good understanding of software development practices including testing, version control, CI/CD and automation., • Experience working with APIs, distributed systems and/or platform technologies., • Strong problem-solving and debugging skills., • The ability to work effectively across application and infrastructure boundaries., • A willingness to learn new technologies and work outside your core area of expertise., • Cloud platforms or cloud‑native technologies., • Internal/private cloud environments., • Containerisation and orchestration technologies., • Infrastructure automation and Infrastructure as Code., • Distributed systems and highly available services., • Kubernetes or similar container orchestration platforms., • Experience working in large‑scale enterprise technology environments. Experience with public cloud providers is not essential. The team operates an internal cloud platform, so candidates with a strong understanding of cloud concepts and architectures will be well positioned to succeed. #J-18808-Ljbffr

At Entrust, we’re shaping the future of identity centric security solutions. From our comprehensive portfolio of solutions to our flexible, global workplace, we empower careers, foster collaboration, and build solutions that help keep the world moving safely. Headquartered in Minnesota, Entrust is an industry leader in identity-centric security solutions, serving over 150 countries with cutting-edge, scalable technologies. But our secret weapon? Our people. It’s the curiosity, dedication, and innovation that drive our success and help us anticipate the future. As a Senior Implementation Consultant at Entrust, you will play a critical role in enabling customers to successfully integrate Entrust’s Identity and Security solutions into their platforms and business processes. Working within our Implementation & Technical Services (Professional Services) team, you will partner with some of Entrust’s largest, most strategic, and high-profile customers, working directly with their engineering and technical teams to design, implement, troubleshoot, and optimise integrations across Entrust’s APIs and SDKs. You will act as a trusted technical advisor from project kickoff through launch, helping customers solve complex technical challenges while ensuring the successful delivery of business-critical identity and security solutions. This is a senior, customer-facing role requiring strong technical expertise, excellent stakeholder management skills, and the ability to independently lead multiple complex implementation projects. The ideal candidate will have a software development background and enjoy working directly with customers to solve technical challenges and drive successful outcomes. • Lead customer onboarding and implementation engagements, delivering Entrust's Integration and Implementation Services packages., • Act as a trusted technical advisor, guiding customers through design, integration, testing, deployment, and go-live activities., • Work directly with customer engineering teams to review implementation approaches, troubleshoot issues, and resolve complex technical challenges., • Provide hands-on technical guidance on integrating Entrust solutions via REST APIs, mobile SDKs, and web SDKs., • Analyse logs, API traffic, and customer code to identify root causes and accelerate issue resolution., • Recommend best practices to improve integration performance, scalability, security, and maintainability., • Lead technical workshops, implementation reviews, and troubleshooting sessions with customer stakeholders., • Partner closely with Product, Engineering, Support, Sales, and Customer Success teams to drive successful customer outcomes., • Manage multiple customer engagements simultaneously while maintaining high standards of delivery and customer satisfaction., • Contribute to the evolution of implementation methodologies, best practices, and customer enablement resources., • Mentor junior team members and contribute to knowledge sharing across the team., • 7+ years' experience in Systems Integration, Software Engineering, Professional Services, Solutions Engineering, Technical Consulting, or a similar customer-facing technical role., • Strong understanding of RESTful APIs, SDK integrations, authentication protocols, and modern cloud-based SaaS architectures., • Hands-on software development experience, including working with languages such as Kotlin and Swift, with the ability to troubleshoot and debug mobile application integrations using tools such as Android Studio and Xcode IDE., • Proven ability to work directly with customer engineering teams to troubleshoot complex technical issues, analyse logs and API traffic, review implementation approaches, and guide customers through resolution., • Experience leading enterprise implementation projects through onboarding, testing, deployment, and go-live activities whilst managing multiple stakeholders and concurrent engagements., • Strong understanding of mobile and web integration concepts, including API consumption, SDK implementation, data handling, and authentication workflows., • Excellent communication, stakeholder management, and problem-solving skills, with the ability to translate complex technical concepts into practical guidance for both technical and non-technical audiences., • Exposure to Identity Verification, Digital Identity, Cyber Security, Authentication, Fraud Prevention, Financial Services, or other regulated industries., • Knowledge of additional programming, scripting, and web technologies such as JavaScript, TypeScript, Java, Python, C#, XML, CSS, and HTML., • Proficiency with integration, debugging, and diagnostic tools such as Postman, Browser Developer Tools, API monitoring platforms, and mobile device logs., • Familiarity with Agile delivery methodologies, software development lifecycles (SDLC), and enterprise software deployment practices., • Additional European language skills, particularly French, German, Spanish, or Italian. At Entrust, we don’t just offer jobs – we offer career journeys. Here is what you can expect when you join our team: • Career Growth: Whether you’re a budding developer or a seasoned expert, we’re invested in your professional journey. With learning-forward initiatives and exciting challenges, your growth is our priority., • Flexibility: Life is all about balance. Whether you’re remote, hybrid, or on-site, we offer flexible options that fit your lifestyle., • Collaboration: Here, your voice matters. Our teams thrive on sharing ideas, brainstorming solutions, and working together to build a better tomorrow. We believe in securing identities- but it doesn’t stop there. At Entrust, we’re passionate about valuing all identities. Our culture is built on diversity, inclusion, and respect. From unconscious bias training for our leaders to global affinity groups that connect colleagues across the globe, we’re creating a community where everyone is encouraged to be themselves. If you’re excited by the prospect of innovating, growing your career, and collaborating in a dynamic environment, Entrust is the place for you. Join us in making a difference. Let’s build a more secure world - together. Entrust is an EEO/AA/Disabled/Veterans Employer Entrust values diversity and inclusion and we are committed to building a diverse workforce with wide perspectives and innovative ideas. We welcome applications from qualified individuals of all backgrounds, and we strive to provide an accessible experience for candidates of all abilities. If you require an accommodation, contact accessibility@entrust.com. #J-18808-Ljbffr

Siemens CNC Controls Engineer Shillito Group are recruiting for a client looking to add an experienced Siemens CNC Controls Engineer for an established client in Sheffield. This is a hands on engineering role working with CNC machine tools, Siemens Sinumerik controls, PLCs and drives. You'll be involved in setting machines up, commissioning them, getting everything talking to each other properly, and fault finding when something isn't doing what it should. There will also be travel to customer sites for installation, commissioning and technical support. What you'll be doing: Commissioning CNC machines using Siemens Sinumerik controls Programming and modifying Siemens PLCs using STEP 7 and TIA Portal Setting up CNC controls, drives, servo motors and machine parameters Fault finding across controls, electrics, hydraulics and pneumatics Testing machines before they go into production Working with sensors, encoders, motors and safety systems Reading electrical and mechanical drawings to diagnose issues Supporting customers with installations, breakdowns and technical problemsWhat we're looking for: You'll need solid experience with Siemens controlled CNC machinery and be comfortable working on the controls side of the machine, not just operating it. Experience with the following would be ideal: Siemens Sinumerik TIA Portal STEP 7 PLC programming CNC parameterisation Servo drives and motors Electrical fault finding Machine tool commissioningWe need you to understand how CNC machines work and how the controls, electrical systems and mechanical elements all fit together. This could suit someone currently working as a Controls Engineer, Commissioning Engineer, CNC Service Engineer, Machine Tool Engineer or PLC Engineer. If Siemens CNC controls are your thing and you like solving problems properly rather than just swapping parts and hoping for the best, this is worth a conversation. Shillito Group is a specialist recruitment and executive search partner, working with ambitious businesses to secure high-impact talent across commercial and engineering markets. Our reputation is built on deep expertise, trusted relationships and delivering results that go beyond the brief

Talentmark are currently recruiting for an Electrical Maintenance Engineer, to join a chemicals and materials manufacturer, at their site based near Sheffield, on a full time, permanent basis. The Company: Our client is a leading provider of specialty metals, alloys, and materials. Salary: Up to £51,000 per annum plus benefits package. Working hours: 4 on 4 off, 12 hour day and night shifts. Electrical Maintenance Engineer Role: Your main duties will be to: Diagnose and repair equipment/plant faults, to minimise plant downtime. Ensure all breakdowns are carried out constructively and accurately. Complete planned preventative maintenance tasks. Work closely with production to achieve production needs. Comply with company procedures and work in a safe and professional manner. Your Background: The ideal candidate for this role will have the following skills and experience: BTEC qualified in an electrical engineering discipline and/or relevant experience, training, or certification. Minimum 3 years’ experience within a medium/heavy manufacturing environment, although other industrial environments would be considered. Demonstrable hands-on knowledge of electrical and PLC control systems (PLC programming experience not essential) Mechanical experience would be advantageous.Apply: It is essential all applicants hold entitlement to work in the UK. Please quote job reference (phone number removed) in all correspondence

Are you an experienced Senior Planner seeking a fresh challenge working for a leading international Tier 1 main contractor? As Senior Planner you will be responsible for initiating and leading tasks and processes, taking responsibility and being accountable, where relevant, for the work and roles of others whilst exercising broad autonomy and judgement within broad parameters in their area of responsibility. Specialist learning and involves detailed analysis of a high level of information and knowledge in an area of work or study. The role of a Senior Planner Responsible for the Planning function on Medium to Large tenders and sites involving complex and detailed analysis of large volumes of information. Ensuring that the optimum sequence to deliver the project is reflected in the programme. To Mentor and develop other members of the Planning team and to undertake high level review of other Planners work. Responsibilities of a Senior Planner Produce fully linked Project Programme for Site, Tender or Pre-qualification purposes to identify critical path, float, risk and opportunity. Ensuring full consideration is given to all restrictions including client and third party approvals and is produced with pre-construction, design and procurement programmes as required Instigate and undertake what-if scenarios and report their projected outcomes Collaborate with other company staff to ensure that works are planned and organised. Determine the requirements for Site set-up and independently prepare phasing, logistics and timeslices along with associated methodology/narratives as required by the tender deliverables Prepare and analyse scaffold, temporary services, crane enquiries, quotations and the like Identify requirements for temporary works and liaise with temporary works coordinator on site. At tender stage liaise with temp works department to obtain design and costings Obtain quotes for 4D construction simulation and liaise with specialist to produce simulations for tenders/interviews At tender stage liaise with Estimating Team to ensure all attendances are priced (not duplicated) and checks are made to ensure s/c's have included for MEWP's, craneage, lifting plant etc. Develop the Programme and supporting documents in line with the form of Contract Implement the agreed change control process that takes full account of the contract requirements and communicates these requirements across team. Work with the supply chain to establish effective relationships and ensure continuous improvement in delivering productivity Actively target opportunities to exceed customer expectations Actively participate in knowledge share events Contribute to the planning input into the PEP documentation, client specific documents etc. Work with the commercial team to ensure effective management of Total Costs Understand business need for positive cash flow and plan works accordingly Train, develop and mentor Junior members of planning team in basics of planning and programming Undertake high level technical appraisal of other Planners work Benefits for a Senior Planner Salary up to £80k + Car Allowance or Company Car Private Healthcare Competitive Pension Scheme Generous Annual Leave Clear Career Progression Please send your CV to (url removed) or call Sheffield office on (phone number removed) and ask for Alex

Controls & Automation Graduate Location: Sheffield Salary up to £35K This role offers training and development to support the maintenance and improvement of industrial control and automation systems. You'll help ensure the reliability and performance of PLC, HMI and SCADA systems through technical support, fault finding, programming and commissioning activities. Key Responsibilities Provide technical support for PLC, HMI, SCADA and industrial control systems to maximise equipment reliability and plant availability. Assist with fault finding, diagnostics, maintenance, modification and commissioning of automation systems and associated electrical control equipment. Support the development, testing, implementation and optimisation of control system software for both new and existing plant equipment. Maintain control system documentation, software backups, change records and technical drawings in accordance with company standards. Support automation improvement projects, machine upgrades and commissioning activities while ensuring compliance with engineering standards and machine safety requirements. Provide technical support to Operations and Maintenance teams. Ensure all work is carried out safely and in accordance with company procedures, statutory legislation and engineering best practice. Carry out any other reasonable duties as requested by management.About You We are looking for someone who has: A degree, HNC/HND or equivalent qualification in Electrical, Electronic, Controls & Automation Engineering, or a related discipline. Knowledge of PLC systems, particularly Allen-Bradley and Siemens platforms. An understanding of HMI and SCADA systems, such as Wonderware/Aveva. A basic understanding of industrial control systems, electrical panels, industrial communications and automation hardware. Knowledge of instrumentation and field devices, including sensors, transmitters, valves, motors, variable speed drives and actuators. The ability to interpret electrical drawings, control schematics, P&IDs and technical documentation. Strong analytical, fault-finding and problem-solving skills. An understanding of machinery safety, safe systems of work and engineering standards. Good communication skills and the ability to work collaboratively with Engineering, Operations, Maintenance, IT, contractors and suppliers. A self-motivated and organised approach, with the ability to prioritise workload effectively.What We Offer Structured training and development within a highly skilled Projects team. Exposure to a wide range of industrial automation and control technologies. Opportunities for career progression within a growing organisation. About Us We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we're happy to discuss flexible working options. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Project Engineer – Fire & Security Location: Regional Field-Based / Sites Nationwide Salary: £35,000 - £48,000 Negotiable Dependent on experience Employment Type: Full-time, Permanent About the Employer The client is a premier, fully accredited industry leader specializing in integrated life safety, security, and data systems. Holding major credentials including ISO-9001, Constructionline Gold, and FIA affiliation, they maintain the absolute highest standards of technical compliance. The business focuses heavily on high-value new build commercial, retail, and large residential construction projects across the UK. The Opportunity Due to an expanding pipeline of Tier-1 construction projects, a highly skilled Project Engineer is required to join their engineering delivery team. Bridging the gap between hands-on installation and project management, the successful Project Engineer will take complete technical ownership of major multi-discipline systems on site. The Project Engineer will oversee installation standards, solve complex technical integration issues, and handle final commissioning phases, all while keeping a sharp eye on project profitability and variations. Key Responsibilities Technical Delivery: Leading the on-site engineering phase of projects, ensuring fire alarms (BS 5839), AOV/smoke ventilation, CCTV, and access control systems are installed and integrated to exact specifications. Commercial & Variations Management: Maintaining strong commercial awareness on site by identifying, documenting, and reporting any site variations or deviations from the original scope of works. Subcontractor & Team Leadership: Overseeing and auditing the quality of work delivered by junior technicians and electrical subcontractors to ensure safety benchmarks are hit. Commissioning & Handover: Executing final commissioning, system programming, and client handovers, ensuring all technical documentation is flawlessly completed. Main Contractor Liaison: Working closely with the internal management team and the main contractor's site staff to troubleshoot engineering bottlenecks and keep the project moving on schedule. What the Ideal Candidate Brings Track Record: A proven track record as a Project Engineer, Lead Engineer, or Senior Installation Technician on large residential, new build commercial, or educational construction sites. Multi-Discipline Expertise: Strong hands-on technical proficiency across both Fire (addressable systems, AOV) and Security (IP CCTV, networked access control, intruder systems). Commercial Mindset: A sharp commercial understanding of project margins, with the ability to spot when site conditions force a change in design and flag variations before executing the work. Qualifications & Credentials: Valid CSCS Gold/Black Card (or equivalent), a Level 3 Fire Alarm qualification (FIA/C&G) is highly desirable, and SSSTS or SMSTS is a major advantage. Drive & Organization: The ability to read complex schematics, manage site diaries, and lead engineering delivery under strict construction program timelines as a dedicated Project Engineer. What’s on Offer? A competitive salary bracket tailored specifically to the candidate's level of experience, alongside a fully expensed company vehicle and fuel card. The opportunity to work on prestigious, high-value new build construction schemes for an industry-accredited market leader. Comprehensive training and a structured progression pathway, making it an ideal environment for a step-up candidate to scale their career as a Project Engineer into full management. Robust corporate benefits package and a long-term, secured pipeline of work. DON’T MISS OUT ON THIS GREAT OPPORTUNITY – APPLY NOW Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful

Audio Visual Installation Engineer Location: Sheffield and Yorkshire area Reports to: Project and Installation Manager Salary: £32,000 to £37,000 per annum Job Type: Full-time, Permanent Are you an experienced AV Technician looking to step into a senior role with national projects, blue-chip clients, and cutting-edge technology? We're working with a dynamic and growing organisation at the forefront of delivering high-impact digital and audio-visual solutions within the automotive and retail sectors. Our client is seeking a Lead Audio Visual Technician to join their talented team and play a pivotal role in delivering AV installations that transform customer experiences across the UK. About the Role As Lead AV Technician, you'll be responsible for overseeing and carrying out installations of audio-visual systems at client sites nationwide. You'll work alongside a skilled in-house team and trusted subcontractors, ensuring all projects are delivered to the highest standards of quality, safety, and professionalism. You'll also play a key role in site surveys, service visits, programming support, and leading installation crews on-site. If you thrive in a hands-on, client-facing role and want to work with the latest AV technology - this could be the perfect opportunity for you. Key Responsibilities: Conduct site surveys and advise on AV hardware, software, and resource requirements Carry out first-fix cable installations and complete end-to-end AV system setup Lead on-site installations nationwide, maintaining a strong quality focus Brief and manage installation partners and subcontractors Make informed decisions around scope changes and risk management on-site Provide technical support including audio and lighting programming Deliver service visits in line with SLAs for key clients Assist with sourcing, vetting, and onboarding local installation engineers What the Client is Looking For: A minimum of 3 years' experience installing AV hardware Comfortable working on-site in a client-facing capacity Strong understanding of AV technologies including LCD/LED displays, video conferencing, video over IP, and video matrix systems Experience with control systems and programming for audio and lighting solutions Solid knowledge of IT networking and troubleshooting within AV environments Desirable: CSCS/ECS card holder IPAF and PASMA accredited Experience with Q-SYS, BI-AMP, and Crestron systems First aid qualified Full UK driving licenceWorking Hours: Monday - Friday, 8:30am - 5:00pm What's in it for You: £32,000 to £37,000 per annum 22 days annual leave + bank holidays (increasing with service) Company pension contribution Life assurance policy Employee discount benefits Fantastic exposure to major industry brands and high-profile projectsIf you're a technically skilled and self-motivated AV professional looking for your next challenge, this is a fantastic opportunity to join a forward-thinking business and grow your career in a leadership role. To apply, please send your CV outlining your relevant experience. We look forward to hearing from you! INDLS How to Apply: Interested candidates are invited to submit their CV and a cover letter detailing their relevant experience and qualifications to (url removed) or you can call on (phone number removed) # 207. Alecto Recruitment Limited is acting as an employment business for this vacancy. We thank all applicants who respond, but only that shortlisted will be contacted. Keywords: Senior AV Engineer, AV Installer, Audio Visual Engineer, Smart Home Engineer, Control4 Programmer, Crestron Programmer, Lutron Programmer, Networking Specialist, IP Network Engineer, Home Automation, Super-Prime Residential AV, AV Project Manager, High-End AV Engineer

Are you an experienced Applications Engineer with a passion for cutting-edge manufacturing solutions? \n Our client, a market-leading provider of manufacturing solutions for complex, high-precision products in the Medical Device and Aerospace & Defence sectors, is seeking a talented Applications Engineer to join their dynamic team in Sheffield. \n Job Purpose: \n The Applications Engineer plays a pivotal role in supporting new products and established processes throughout the full product lifecycle. From RFQ and DFM through to production prove-out and cost/rework reduction, this role requires flexibility and a commitment to delivering engineering objectives while ensuring operations are fully supported. \n Main Duties and Responsibilities: \n Project Management: \n Plan, lead, and execute multiple programmes while monitoring deliverables and reporting to management. \n Collaborate with internal functions such as Programme Management, Quality, and Production, and interface with customers as needed. \n \n Manufacturing Process Ownership: \n Ensure jobs run effectively according to production plans and that work instructions are fit for purpose. \n Proactively identify and investigate opportunities for improvement. \n \n Daily Operations Representation: \n Actively participate in daily operations meetings, providing valuable input and resolutions to open actions. \n Quotations and Financial Estimations: \n Prepare accurate quotations to support programme pro formas and manage manufacturing cost targets effectively. \n Subject Matter Expertise: \n Leverage extensive experience to drive best practises and collaborate with stakeholders to implement leading solutions. \n Company Values: \n Uphold the organisation's values of People, Integrity, Excellence, and Commitment while holding others accountable. \n Additional Duties: \n Perform other related tasks as directed by management. \n Qualification Requirements: \n Educational/Training Requirement: \n A degree in Engineering (Mechanical or equivalent) with a minimum of 5+ years of experience in a similar role. Candidates currently pursuing relevant qualifications will also be considered. \n Experience: \n\n • Significant experience in manufacturing geometrically complex milled and turned components, particularly for orthopaedic and aerospace markets.\n, • Proven track record of successfully delivering engineering projects and utilising project tracking tools.\n\n Knowledge, Skills, and Abilities: \n\n • Strong problem-solving skills and the ability to manage complex workloads with shifting priorities.\n, • Proficient in CAM systems (Hypermill / Mastercam / Vericut) and CNC programming, with experience in multi-axis CNC machines.\n, • Familiarity with CAD software for designing tooling and fixturing, and generating in-process prints.\n, • Basic knowledge of lean and industrial engineering principles, including process flow and equipment layout.\n, • Excellent communication and collaboration skills, capable of conveying technical information to diverse audiences.\n, • Proficient in ERP systems, able to create and maintain manufacturing documentation.\n\n \n Working hours: \n\n • Core working hours are 09:00AM - 3:30PM, Monday - Thursday and 09:00AM - 2PM on a Friday.\n\n \n Why Join Our Client? \n This is a fantastic opportunity for a driven Applications Engineer to make a meaningful impact within a forward-thinking organisation. With a commitment to innovation and excellence, our client values collaboration and integrity in every aspect of their business. \n If you are ready to take your career to the next level and contribute to pioneering projects in the engineering industry, don't miss out on this exciting opportunity! Apply today and embark on a rewarding journey with our client! \n Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. \n \n Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. \n By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

CNC MILLER PROGRAMMER We are recruiting for an experienced CNC Miller to work for our client who are in Sheffield, South Yorkshire. THE DUTIES OF A CNC PROGRAMMER: Programming, Setting and operating a large milling machine Producing high precision work Be able to use SolidWorks Reading engineering drawings ESSENTIAL EXPERIENCES & SKILLS: Minimum 2 years' experience working within a high precision manufacturing background. Excellent communication skills * Programming is essential THE HOURS: You will be working Nights: Monday – Thursday: 4:30pm – 2:30am Overtime is x1.5 THE PAY: The rate of pay is an hourly rate of £23.20 per hour. ( includes shift allowance ) Questech Recruitment is a specialist engineering support within the Mechanical & Engineering industry, our focus is to support many clients within the M&E Sectors. If you feel you match the desired criteria, or you would like more information on roles such as CNC Machinist , CNC Programmer, CNC Setter , CNC Operator, we would really like to hear from you.#CNC #CNCProgrammer #fanuc #CNCSetter #CNCOperator #heidenhein #hurco

Our client is a global leader in stainless steel, as a business they strive to employ people who are passionate about success and seek to inspire others in their working environment. At their site in Sheffield they are requiring a skilled Electrical Maintenance Engineer to join their dynamic and hardworking team on a permanent basis in the heavy industry department. As Electrical Maintenance Engineer your job will be to manage all electrical works and functions across the department. THE BENEFITS: Quarterly bonus with a max pay out of 20% Overtime is paid at 1.5 x with certain Bank Holidays paid at 2 x (Overtime is on Saturdays) 28 days holiday (for 1st year including BH, increasing annually up to a max of 35 after 5 years' service) Pension - Under 30 - 1% (Employee), matched, 10% (total potential) 30-49 - 1-3% (employee), matched, 10-14% (total potential) 50+ 1-5%, matched, 10-18% (total potential) Costco Membership (Membership fees to be paid by employee) Westfield Health Level 1 plan Grab a steel (Site with exclusive discounts and savings) Gym Discount (Only SIV centres) 02 Discount (Only new items not existing) THE ROLE: Working on a shift basis covering the electrical operations requirements of a heavy engineering plant. Electrical maintenance of all motors and drives. Fault finding on electronic cards to component level. Maintenance of the mill thyrisitor drives. Electrical maintenance of overhead D.C. and A.C. cranes. Maintenance of PLC systems, specifically ABB and Allen Bradley. Use of programming tools to identify faults on PLC systems and changed parameters as required. Monitoring and maintaining the furnace control systems, calibration of controllers and the air / gas transducers, changing of thermocouples and the lighting procedure of furnaces. Reacting to breakdown requirements and safely / quickly identifying faults to minimise the impact on production. Working 4 on.4 off no weekends. Salary: £41,422.09 plus 18.67% shift allowance £49,155.59 THE CANDIDATE: Education to H.N.C. Level in an Electrical Engineering discipline. A basic understanding of P.C. based software, Excel etc An understanding and ability to interpret electrical drawings Experience in writing reports detailing the activities during shift Experience in working to safety legislation relevant to operations and electrical maintenance * Experience in adhering to S.W.P.'s, risk assessments, I+I procedures and the permit systems, as well as I.E.E. Regulations. The Consultancy: Edwards & Pearce acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Edwards & Pearce is an Equal Opportunities Employer

CNC Turner (Long Shaft Components) \n £16 - £20 per hour + Day Shifts + Overtime + Pension + PPE \n Ideally Located: Sheffield, Rotherham, Doncaster, Barnsley, Chesterfield, Swallownest, Wickersley, \n Are you a CNC Turner looking to join a rapidly growing, close-knit company where you have the opportunity to maximise your earnings through plenty of overtime opportunities? \n On offer is the chance to join a well-established company who can provide you with excellent job security as well as continuous inhouse training. \n In this role you will be working with industrial CNC turning machines where you will be required to programme, set and operate them. \n This role would suit a CNC Turner who's ready to establish themselves within a small but sought after company. \n The Role: \n\n • Programming, setting, and operating heavy duty CNC machinery.\n, • Making sure quality of work produced is high.\n, • 40 hours per week with an uplift for overtime.\n, • Rotating day shifts (6:00am-2:30pm)\n\n The Person: \n\n • Time served CNC Turner.\n, • Previous experience working with long shafts (10 meters +).\n, • An Engineering background.\n\n Reference Number: 279124 \n To apply for this role or to be considered for further roles, please click "Apply Now" or contact Fred Sibley at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Role: Quality Control Inspector We invite you to join our highly skilled and flexible manufacturing team Sheffield Precision Medical is looking for an experienced and flexible Quality Control Inspector to join our skilled manufacturing team. This is an excellent opportunity for someone with Quality Control and Metrology experience who enjoys working on a challenging and varied product range and wants to develop their skills while supporting our manufacturing team. You'll work in a clean manufacturing environment with accurate metrology machinery and equipment, taking responsibility for reviewing products to ensure they conform to customer specifications, while providing collaborative support to Production Engineers and associated departments. The Role at a Glance Position: Quality Control Inspector Shift pattern: Standard day shift – 07:00–15:00, Monday–Friday The Quality Control Inspector is actively engaged in ensuring products meet customer requirements and that quality control systems are maintained throughout manufacture. Inspectors will have day-to-day responsibility for working with staff in the Quality and Technical departments, while progressing jobs with Engineers and Machine Operators. You won't be expected to know everything from day one. You'll be supported by experienced colleagues who are happy to share their knowledge, and we encourage people to ask questions and learn from each other. Duties & Responsibilities • Carry out final dimensional inspections against engineering drawings and complete applicable reports, including CTQs (Critical-to-Quality dimensions) and FAI (First Article Inspection). • Conduct first-off/last-off inspections against engineering drawings and 3D models on production batches, new products and prototypes. • Create and complete customer-specific inspection reports using IPI inspection software and the company MRP system. • Verify Production Engineer in-process checks, communicating feedback to support the collective goal of quality control. • Carry out sample inspections and spot-checks on production work as appropriate. • Ensure quality control systems are maintained and followed. • Carry out visual and functional checks as required for piece parts and final assemblies. • Provide training to SPM staff on the use of inspection equipment. • Support the QC & QA departments to ensure the calibration system is maintained. • Support the Inspection department to ensure inspection machines and equipment are serviced and maintained. • Work with production operatives to achieve customer priorities and production targets. • Engage in collaborative customer communications and meetings as required. Desired Experience • Strong understanding of engineering drawings and geometric tolerancing. • Sound experience and capability in operating, setting and programming CMM machinery. • Sound experience and capability in the use of basic handheld inspection equipment and shadow graphs. • Experience in the use and control of precision gauges. • Computer literate, with the ability to quickly adopt and use company software. • Previous experience working with OGP (Optical Projector) and Vicci Vision (laser-scanning) equipment is desirable but not essential. Personal Qualities You'll be someone who: • Is respectful, honest and responsible, with a strong team-player attitude. • Takes pride in the quality of their work. • Understands and complies with industry requirements and company policies. • Can work independently while also contributing positively to a team. • Takes ownership of the quality of their work and production output. • Has a helpful and positive attitude towards colleagues. • Is reliable and has good timekeeping. • Is flexible and able to adapt to changing production requirements. • Is committed to maintaining high standards of health, safety and good working practices. • Wants to develop their skills and contribute to continuous improvement. Work Pattern • 7am–3pm Mon–Fri • Break-time – ½ Hr Lunch-break • ¼ Hr Breakfast-break gesture if starting at 7am or before • Over-time Rate – Mon–Sat: x1.5 / Sun: Double-time • Company Bonus – Company Output/Performance dependant • Holiday Allowance – 26 Days + 8 Statutory (34 / Yr) • Pension Plan – State: Company 3% / Employee 5% (Auto-enrol, Opt-out optional)

Reed Engineering & Manufacturing are working with a leading Engineering & Manufacturing company Job Title: Electrical Controls & Instrumentation Engineer Job Purpose To provide specialist instrumentation and control engineering support to ensure the safe, reliable, and efficient operation of the companies manufacturing processes. The role focuses on maintaining and improving automation systems across assets such as furnaces and other heavy engineering plant within the site Key Responsibilities 1. Asset Reliability & Maintenance Deliver high levels of plant availability through effective maintenance of instrumentation and control systems. Maintain and calibrate field instruments (pressure, flow, temperature, level, gas analysers). Support reliability-centred maintenance (RCM) and predictive maintenance initiatives. Provide rapid fault diagnosis and resolution to minimise production downtime.2. Control Systems & Automation Configure, maintain, and upgrade PLC, DCS, and SCADA systems used across company operations. Common platforms: Siemens (S7/TIA), ABB, Rockwell Automation etc Support and enhance automation systems for: furnace processes Fault diagnosis within the site for controls, instrumentation and combustion Ensure robust control logic, interlocks, and safety systems are maintained.3. Continuous Improvement Identify opportunities to improve process stability, yield, energy efficiency, and product quality.4. Projects & Engineering Development Support capital projects, upgrades, and plant modifications. Contribute to engineering design, including P&IDs, specifications, and functional design documents (FDS). Supervise installation and commissioning activities, including loop checks and SAT/FAT testing.5. Health, Safety & Environmental Compliance Ensure all systems comply with company Zero Harm safety culture. Participate in risk assessments such as HAZOP, SIL verification, and FMEA. Ensure compliance with COMAH regulations and other UK industry standards. Promote safe working practices in a heavy industrial environment.6. Stakeholder Collaboration Work closely with operations, mechanical, and electrical teams to support production targets. Liaise with OEMs, contractors, and engineering partners. Provide technical guidance and mentorship to technicians and apprentices.7. Documentation & Governance Maintain accurate maintenance records, calibration certificates, and engineering documentation. Ensure compliance within company standards and audit requirements.Skills & Experience Essential Technical Skills Strong experience with: PLC programming (Siemens, Allen-Bradley) would be advantageous Burner Management identification and finding Distributed Control Systems (ABB, Honeywell, etc.) SCADA systems SAT and TUS experience would be advantageous Desirable Experience within steel or heavy industry (e.g., metals, energy, petrochemical). Exposure to high-temperature or continuous manufacturing processes. Knowledge of drives, motors, and process automation in the heavy engineering industry Qualifications A relevant qualification (or equivalent experience) in: Control & Instrumentation Engineering Electrical/Electronic Engineering

Our client in Sheffield is seeking a talented Applications Engineer to join their dynamic team. This is an exciting opportunity for an individual passionate about engineering, who thrives in a fast-paced environment and is eager to make a significant impact on product development and manufacturing processes. Job Purpose: The Applications Engineer plays a critical role in supporting new products and technologies, as well as established processes. This position involves overseeing the full product lifecycle, from RFQ and DFM through to production prove-out and identifying cost/rework reduction opportunities. The successful candidate will work with flexibility, ensuring that Operations are effectively supported while achieving Engineering objectives. Key Responsibilities: Project Management: Plan, lead, and execute multiple engineering programmes while monitoring and reporting deliverables to management. Collaborate with internal functions, such as Programme Management, Quality, Planning, and Production, as well as interface with customer technical teams. Manufacturing Process Ownership: - Ensure that assigned programmes run effectively according to the production plan. - Develop and optimise work instructions, proactively identifying and investigating improvement opportunities. Operations Representation: Attend daily Operations meetings, provide input and resolutions, and ensure timely feedback is communicated to relevant teams. Quotations and Financial Estimations: Provide accurate financial estimations to support programme pro formas and customer quotations. Own manufacturing cost targets per project plan, finding solutions to meet targets when off track. Subject Matter Expertise: Utilise extensive experience and specialist knowledge to drive best practises and collaborate with stakeholders to implement leading-edge solutions. Company Values: Uphold and promote the company's core values: People, Integrity, Excellence, and Commitment. Qualifications and Experience: Educational Requirement: A degree in Engineering (Mechanical or equivalent) is required. Candidates currently pursuing a qualification will also be considered. Experience: 5+ years in a similar role, with substantial experience in manufacturing geometrically complex milled and turned components, ideally for the orthopaedic and aerospace sectors. Proven track record of delivering engineering projects and familiarity with project tracking tools. Experience in heavily regulated industries with a strong understanding of process adherence and change control. Knowledge, Skills, and Abilities: Committed problem solver with the ability to manage a complex workload and adapt to shifting priorities. Proficiency in CAM systems (such as Hypermill, Mastercam, or Vericut) and CNC programming, with a preference for Multi-axis CNC machining experience. Basic understanding of lean and/or industrial engineering principles, including process flow and equipment layout. Strong communication skills, capable of conveying technical information to both technical and non-technical audiences. Collaborative team player with good ERP knowledge to create and maintain manufacturing documentation. Working Hours: 09:00AM - 3:30PM, Monday - Thursday and 09:00AM - 2PM on a Friday. This is an exceptional opportunity to contribute to an innovative and forward-thinking organisation. If you are an enthusiastic Applications Engineer looking to advance your career in a supportive and engaging environment, this position may be the perfect fit. To express interest in this role, please submit your CV and cover letter outlining your relevant experience and achievements. Join our client in making a difference in the engineering sector! Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you. Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer. By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website

Ivy Resource Group are working with a well-established contractor to recruit an experienced Project Manager for a permanent role based in Sheffield. You will be overseeing a diverse portfolio of commercial projects including schools, hospitals, colleges, universities and leisure centres. The company: Our client is a leading regional contractor and family-owned business that has a passion for innovation and a drive for achieving excellence. They have been in business for over 30 years and work across a variety of sectors, including: Commercial, Leisure, Education, Healthcare, Residential and Retail. The Role: Full project management from inception to completion on high-value commercial projects Planning, programming, and coordination of all on-site activities Managing subcontractors, suppliers, and project teams to deliver on time and budget Monitoring project costs, progress, and quality standards Maintaining strong communication with clients, consultants, and senior management The Ideal Candidate: Proven experience as a Project Manager on commercial projects Strong track record working on education, healthcare or leisure sectors Experience within Tier 1 contracting environments is highly desirable Excellent leadership, organisation, and communication skills Stable career history demonstrating long-term commitment Salary & Package: £60,000 per annum + £5,500 car allowance Competitive benefits package Opportunity to manage high-profile, high-value projects 27 days (+BHs) annual leave, Car Leasing scheme via salary sacrifice, Death in Service (4x), Cycle to Work, Cash Plan (claim back), Pension 3% Ee / 5% Er How to apply: Please submit your CV and a member of our team will respond to you. Ivy Resource Group are committed to promoting equal opportunities to people regardless of age, gender, religion, belief, race, sexuality or disability. We operate as an employment agency and employment business. IND123

NTT DATA are seeking an experienced z/OS Mainframe Systems Programmer to work on major projects, in one of the largest z/OS Mainframe environments globally. The role involves upgrading and supporting the z/OS operating system and ISV products, mainly from IBM and Computer Associates (CA). • Upgrading, maintaining and supporting the z/OS operating system, • Upgrading, maintaining and supporting ISV products particularly from IBM and Computer Associates (CA), • Working closely with the other Engineering teams to ensure the systems that are built are stable, available, up to date and running as effectively and efficiently as possible, • Managing hardware and logical resources across LPARs:, • DASD and tape allocation via HCD/HCM, • LPAR configuration in HMC, • Security administration using RACF or equivalent, • Ensuring data integrity and swift recovery:, • DFSMShsm policies and recall management, • FDR/ABR for high‑speed backups, • FlashCopy or virtual tape replication for near‑instant restores, • Optimizing system throughput and response times:, • RMF and SMF report analysis, • OMEGAMON or BMC MainView dashboards, • WLM classification and tuning, • Configuring and supporting mainframe connectivity:, • VTAM and SNA definitions, • TCP/IP stack on z/OS, • OSA adapter and Coupling Facility communication, • Executing OS and product upgrades with industry‑standard utilities:, • SMP/E for PTF, APAR, and deliverable management, • z/OSMF workflows for streamlined maintenance, • Broadcom (e.g., Topaz), IBM, and BMC tooling for fix management and compliance reporting, • Multiple years of z/OS systems programming experience, • Strong Parallel Sysplex skills, • Proficiency with z/OS, TSO/ISPF, USS, SDSF, JCL, RACF, • Experience installing and maintaining IBM and CA products, • Deep mastery of z/OS architecture, including IPL procedures, JES2/JES3 configurations, Sysplex management, SMF data collection, and parmlib customization, • Proficient in writing and debugging system‑level routines and automation:, • Assembler for exits and control blocks, • REXX for scripting and batch utilities, • JCL for job submission, parameterization, and workflow control, • Analytical troubleshooting of abends, storage hangs, and performance anomalies using:, • Dump analysis with IPCS, • SLIP and trace tools, • System logs and console messages, • Ensuring data integrity and swift recovery:, • DFSMShsm policies and recall management, • FDR/ABR for high‑speed backups, • FlashCopy or virtual tape replication for near‑instant restores, • Knowledge of performance monitoring, networking, and mainframe connectivity, • Experience executing OS and product upgrades with industry‑standard utilities:, • SMP/E for PTF, APAR, and deliverable management, • z/OSMF workflows for streamlined maintenance, • Broadcom (e.g., Topaz), IBM, and BMC tooling for fix management and compliance reporting, • Project management and hardware refresh planning, including IPL scheduling, vendor coordination, and change‑control governance, • Ability to produce clear system diagrams, runbooks, and upgrade plans while collaborating with application, storage, networking, and security teams, • Strong documentation and communication skills, • Experience in banking or large installations preferred, • Confident, independent, able to contribute from day one, • Excellent problem‑solving skills and a true team player, • Availability for off‑hours support during software changes when required, • Staying current on IBM Redbooks, z/OS release notes, firmware updates, and attending vendor training or industry conferences Hybrid working: remote + on client site (Sheffield) You will enjoy a comprehensive, locally competitive benefits package. NTT DATA is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. For our EEO Policy Statement, please click here. If you'd like more information on your EEO rights under the law, please click here. For Pay Transparency information, please click here. #J-18808-Ljbffr

We're recruiting for an experienced Azure DevOps Engineer to join the Cybersecurity Product Sustained Engineering team of a leading global financial services organisation. This role offers the opportunity to work on enterprise-scale Azure environments, supporting cloud infrastructure, automation, CI/CD and Infrastructure as Code. You'll work closely with engineering, architecture, security and operations teams to deliver secure, reliable and scalable cloud solutions. • Design, build and maintain Azure infrastructure including Virtual Machines, Virtual Networks, subnets, private endpoints and Azure Storage., • Develop and maintain Infrastructure as Code using Terraform, Bicep and ARM templates., • Build and support CI/CD pipelines using Azure DevOps for infrastructure and application deployments., • Develop Python automation and Azure Functions to support cloud-based solutions., • Support Azure App Services and other custom-built applications across enterprise environments., • Implement monitoring, logging and diagnostics using Azure Monitor, Application Insights and Log Analytics., • Troubleshoot infrastructure, deployment and application issues and develop automated, scalable solutions., • Work closely with architects, developers, security teams and stakeholders to support and evolve the Azure platform., • Ensure cloud infrastructure and applications adhere to security, governance, compliance and regulatory standards., • Produce clear technical documentation, infrastructure configurations and operational procedures., • Contribute as a technical SME, providing guidance on cloud engineering, automation and infrastructure decisions., • Proven experience in a DevOps, Cloud Engineering, Platform Engineering or Infrastructure Engineering role., • Strong hands-on experience with Microsoft Azure in an enterprise environment., • Strong experience managing Azure Virtual Machines and Virtual Networks (VNets)., • Proven experience building and maintaining CI/CD pipelines, particularly using Azure DevOps., • Strong Terraform experience with Infrastructure as Code., • Hands-on programming or scripting experience using Python, PowerShell or Bash., • Experience with Azure Storage and core Azure infrastructure services., • Experience working within complex enterprise or data-centre environments., • Strong troubleshooting and problem-solving skills., • Excellent communication and stakeholder management skills., • Azure App Services and Azure Functions., • Azure Monitor, Application Insights and Log Analytics., • Bicep or ARM templates., • AWS or other cloud platform experience., • Cybersecurity or security engineering experience., • Azure OpenAI / LLM integrations., • Private Endpoints and advanced Azure networking., • Experience working within regulated or financial services environments., • Knowledge of cloud governance, security controls and DevSecOps practices. This is an excellent opportunity to join a high-performing engineering team supporting enterprise-scale Azure environments, with a strong focus on cloud infrastructure, automation, CI/CD, Infrastructure as Code and secure engineering practices. GCS is acting as an Employment Business in relation to this vacancy. #J-18808-Ljbffr

Work Type: Hybrid / Open for full-time & Contract At Synechron, we believe in the power of digital to transform businesses for the better. Our global consulting firm combines creativity and innovative technology to deliver industry-leading digital solutions. Synechron’s progressive technologies and optimization strategies span end-to-end Artificial Intelligence, Consulting, Digital, Cloud & DevOps, Data, and Software Engineering, servicing an array of noteworthy financial services and technology firms. Through research and development initiatives in our FinLabs we develop solutions for modernization, from Artificial Intelligence and Blockchain to Data Science models, Digital Underwriting, mobile‑first applications and more. Over the last 20+ years, our company has been honored with multiple employer awards, recognizing our commitment to our talented teams. With top clients to boast about, Synechron has a global workforce of 14,700+ and has 55 offices in 20 countries within key global markets. For more information on the company, please visit our website or LinkedIn community. Diversity & Inclusion are fundamental to our culture, and Synechron is proud to be an equal opportunity workplace and an affirmative‑action employer. Our Diversity, Equity, and Inclusion (DEI) initiative ‘Same Difference’ is committed to fostering an inclusive culture – promoting equality, diversity and an environment that is respectful to all. We strongly believe that a diverse workforce helps build stronger, successful businesses as a global company. We encourage applicants from across diverse backgrounds, race, ethnicities, religion, age, marital status, gender, sexual orientations, or disabilities to apply. We empower our global workforce by offering flexible workplace arrangements, mentoring, internal mobility, learning and development programs, and more. All employment decisions at Synechron are based on business needs, job requirements and individual qualifications, without regard to the applicant’s gender, gender identity, sexual orientation, race, ethnicity, disabled or veteran status, or any other characteristic protected by law. We are looking for a highly skilled Application Developer with strong expertise in identity API development, data ingestion and transformation, and event-driven (Pub/Sub) architectures. This role focuses on building secure, scalable identity and access workflows across Google Cloud Platform, integrating identity services with custom APIs, Pub/Sub pipelines, and cloud‑native applications. You will collaborate closely with tech leads, Cloud Security, DevOps, and Application Engineering teams to design and implement robust IAM automation, identity lifecycle workflows, and secure service integrations that support enterprise‑level cloud and Identity operations. • Identity Orchestration:, • Design and implement identity flows for provisioning, de‑provisioning and orchestration of identity lifecycle events., • Integrate with Cloud Identity Services, ServiceNow, and internal services to streamline / orchestrate identity provisioning and identity lifecycle management., • Build policy‑based orchestration workflows for adaptive authentication and context‑aware access using industry standards (like OPA)., • API Development:, • Design, build, and secure RESTful APIs and backend services supporting identity, provisioning, and governance workflows., • Integrate APIs with our new authentication service for token validation, user sessions, and application‑level authorization., • Build and document internal SDKs, middleware, and shared libraries for consistent IAM logic across services., • Ensure API security, performance, reliability, resilience, and observability., • Develop pipelines where API events publish to Pub/Sub for asynchronous workflows such as:, • automated identity lifecycle tasks, • access review event triggers, • logging and audit forwarding, • security anomaly detection, • Build Cloud Functions, Cloud Run microservices, or containerized services to process Pub/Sub messages., • Implement robust event‑processing patterns including retries, idempotency, DLQs, and structured logging., • Build and maintain Terraform modules for I AM, API services, Pub/Subtopics, workloads, and permissions., • Automate deployment and validation of identity and access configurations via CI/CD pipelines., • Implement automated testing for IAM policies and API behavior., • Troubleshoot identity, access, and API workflow issues across distributed systems., • Provide technical guidance to engineering teams on secure API design, IAM best practices, and identity workflows., • Work with security teams during audits, compliance checks, and incident investigations., • Proven experience with modern identity orchestration platforms (Auth0 Actions, Okta Workflows, WorkOS, or SlashID), • Strong programming skills in Python, Go, or Node.js for API and microservice development., • Experience designing and deploying cloud‑native APIs (Cloud Run, Cloud Functions, GKE)., • Deep understanding of event‑driven architectures, Pub/Sub, message processing, and workflow automation., • Strong knowledge of OAuth2, OIDC, JWT, SAML, and identity federation patterns., • Proficiency in Terraform or equivalent IaC tools., • Experience using API gateways, reverse proxies, or service mesh technologies., • Analytical thinker with strong debugging and root‑cause analysis abilities., • Clear communication skills with the ability to collaborate across engineering, security, and operations teams., • Ownership mindset, with a security‑first mentality and attention to detail., • Ability to work in an agile, fast‑paced environment., • Experience with additional identity providers (Okta, Azure AD, Ping Identity)., • Familiarity with Kubernetes (GKE RBAC + workload identity)., • Experience using Secret Manager, Vault, or other secrets management tools. Knowledge of compliance frameworks (SOC2, ISO 27001, PCI, HIPAA). #J-18808-Ljbffr

Arm’s IP and Technology team in Solutions Engineering department develop subsystem solutions and SoC IPs for next-generation systems targeting Edge AI, Physical AI and Cloud AI. We work across Arm, bringing together the latest Arm technologies and selected third-party IP, as well as developing our own IP where needed, to deliver highly integrated and optimised solutions. Arm’s IP and Technology team in Solutions Engineering department develop subsystem solutions and SoC IPs for next-generation systems targeting Edge AI, Physical AI and Cloud AI. We work across Arm, bringing together the latest Arm technologies and selected third-party IP, as well as developing our own IP where needed, to deliver highly integrated and optimised solutions. We are looking for an experienced, motivated and creative Staff Subsystem Design Engineer with a strong background in RTL, IP design and subsystems. You will work on challenging subsystem designs, developing microarchitectures, designing and integrating IP, and solving complex engineering problems across power, performance, area and implementation. You will work with a diverse, global group of engineers and collaborate across architecture, verification, implementation and other technology teams to deliver high-quality designs. As a Staff Subsystem Design Engineer, you will be involved in the specification, microarchitecture, RTL design and integration of complex IPs and compute subsystems. • Analyse architectural and system specifications, understand implementation challenges and collaborate with architects to refine solutions., • Develop subsystem and IP microarchitecture specifications from high-level requirements., • Design new IP and subsystem logic where required, as well as integrate existing Arm and third-party IP into complete subsystem solutions., • Understand IP functionality, interfaces and system-level interactions to ensure robust integration within the subsystem., • Develop and maintain design intent, including UPF and timing constraints, where applicable., • Perform and drive design quality checks including Lint, CDC, RDC, X-propagation, synthesis and other static design checks., • Navigate architectural and implementation trade-offs and clearly articulate the rationale behind design decisions., • Work closely with verification teams to review test plans, support verification and debug complex design issues., • Collaborate with implementation, performance and power teams to ensure designs meet functional, timing, area, power and performance requirements., • Improve design methodologies and flows to address evolving subsystem and IP development needs., • Plan and drive your work to ensure high-quality and timely delivery., • Provide technical guidance, design reviews and support to other engineers while contributing effectively as part of the wider team. In addition to holding a Bachelor's, Master's or PhD degree in Electrical Engineering, Electronics Engineering, Computer Engineering or a related discipline, you will have 10+ years of relevant industry experience and demonstrate: • Extensive hands-on experience in digital RTL design and microarchitecture development using SystemVerilog and/or Verilog., • A strong delivery record of sophisticated IP or RTL subsystem designs., • Deep understanding of RTL design techniques and methodologies for complex subsystem and SoC development., • Ability to analyse high-level specifications and translate them into efficient and robust microarchitectures., • Familiarity with industry-standard EDA tools and methodologies., • Experience with static design checks including Lint, CDC, RDC and X-propagation., • Experience with synthesis, timing analysis and power-management techniques., • Understanding of low-power design methodologies, including UPF, clock/power gating and multiple power domains., • Ability to navigate performance, power, area, timing and complexity trade-offs and clearly articulate the rationale behind engineering decisions., • Knowledge of on-chip protocols and interfaces including AMBA AXI, APB and streaming interfaces., • Strong understanding of computer architecture and processor-based systems., • Knowledge of AI-powered software development tools and scripting workflows, including AI coding assistants such as Codex, GitHub Copilot, or equivalent technologies., • Excellent communication, collaboration and teamwork skills., • A self-driven and motivated approach, with the ability to take ownership of complex technical problems and drive them to completion., • Experience with Arm-based designs, Arm System Architectures and AMBA protocols., • Experience with advanced low-power RTL design and power-aware verification, including power/clock gating, retention and DVFS., • Proficiency with SystemVerilog Assertions (SVA) and formal verification techniques, and UVM., • Knowledge of Functional Safety methodologies and safety-related hardware design., • Experience developing or improving RTL, IP and subsystem design flows and methodologies., • High-level programming experience such as C/C++. You will have the opportunity to apply your engineering experience to challenging subsystem and IP design problems, working with teams across Arm to develop technologies for the next generation of AI systems. You will be part of #J-18808-Ljbffr

Role Title: Application Developer Location: Sheffield (3 days onsite is mandatory) Rate: £400 - £475 We are looking for a highly skilled Application Developer with strong expertise in identity API development, data ingestion and transformation, and event-driven (Pub/Sub) architectures. This role focuses on building secure, scalable identity and access workflows across Google Cloud Platform, integrating identity services with custom APIs, Pub/Sub pipelines, and cloud-native applications. You will collaborate closely with tech leads, Cloud Security, DevOps, and Application Engineering teams to design and implement robust IAM automation, identity lifecycle workflows, and secure service integrations that support enterprise-level cloud and Identity operations. • Design and implement identity flows for provisioning, de-provisioning and orchestration of identity lifecycle events., • Integrate with Cloud Identity Services, ServiceNow, and internal services to streamline / orchestrate identity provisioning and identity lifecycle management., • Build policy-based orchestration workflows for adaptive authentication and contextaware access using industry standards (like OPA)., • Design, build, and secure RESTful APIs and backend services supporting identity, provisioning, and governance workflows., • Integrate APIs with our new authentication service for token validation, user sessions, and application-level authorization., • Build and document internal SDKs, middleware, and shared libraries for consistent IAM logic across services., • Ensure API security, performance, reliability, resilience, and observability., • Develop pipelines where API events publish to Pub/Sub for asynchronous workflows such as:, • automated identity lifecycle tasks, • access review event triggers, • logging and audit forwarding, • security anomaly detection, • Build Cloud Functions, Cloud Run microservices, or containerized services to process Pub/Sub messages., • Implement robust event-processing patterns including retries, idempotency, DLQs, and structured logging., • Build and maintain Terraform modules for IAM, API services, Pub/Subtopics, workloads, and permissions., • Automate deployment and validation of identity and access configurations via CI/CD pipelines., • Implement automated testing for IAM policies and API behaviour., • Troubleshoot identity, access, and API workflow issues across distributed systems., • Provide technical guidance to engineering teams on secure API design, IAM best practices, and identity workflows., • Work with security teams during audits, compliance checks, and incident investigations., • Proven experience with modern identity orchestration platforms (Auth0 Actions, Okta Workflows, WorkOS, or SlashID), • Strong programming skills in Python, Go, or Node.js for API and microservice development., • Experience designing and deploying cloud-native APIs (Cloud Run, Cloud Functions, GKE)., • Deep understanding of event-driven architectures, Pub/Sub, message processing, and workflow automation., • Strong knowledge of OAuth2, OIDC, JWT, SAML, and identity federation patterns., • Proficiency in Terraform or equivalent IaC tools., • Experience using API gateways, reverse proxies, or service mesh technologies., • Analytical thinker with strong debugging and root-cause analysis abilities., • Clear communication skills with the ability to collaborate across engineering, security, and operations teams., • Ownership mindset, with a security-first mentality and attention to detail., • Ability to work in an agile, fast-paced environment., • Full Stack App Development (React), • Google Professional Cloud Security Engineer or Cloud Architect certification., • Experience with additional identity providers (Okta, Azure AD, Ping Identity)., • Familiarity with Kubernetes (GKE RBAC + workload identity)., • Experience using Secret Manager, Vault, or other secrets management tools., • Knowledge of compliance frameworks (SOC2, ISO 27001, PCI, HIPAA)., • Bachelor's degree in computer science, Engineering, Information Security, or equivalent hands-on experience. #J-18808-Ljbffr

Join an established engineering business offering an opportunity for an experienced CNC professional to move into a varied Applications Engineer position. This role would suit someone with strong CNC programming and setting experience who enjoys solving technical problems and wants more variety than a traditional production-based CNC position. You'll work across programming, process development, ma... JBRN1_UKTJ

An exciting opportunity for applicants with a background in CMM Operation and/or Programming to join a growing business based near Barnoldswick, Lancashire. A leading manufacturer of precision-engineered components based near Barnoldswick are looking to recruit a CMM Operator / Programmer to join their growing CMM & Quality team. This is a full-time, permanent position that will be based on-site 5 ... JBRN1_UKTJ

Job Title: Multiskilled Engineer Department: Engineering & Maintenance Location: Wolverhampton Shift Pattern: Perm Days (1 in 3 rotation at weekends on call.) Reporting To: Engineering Manager Overview An established manufacturing organisation is seeking a skilled Electrically Biased Multiskilled Engineer to support the ongoing maintenance and optimisation of high-volume production equipment. This role is critical in ensuring operational efficiency, minimising downtime, and supporting continuous improvement initiatives across the site. Qualifications & Experience • Recognised electrical engineering qualification (e.g. City & Guilds, HNC, or equivalent), or demonstrable hands-on experience at an equivalent level, • Proven background in electrical maintenance within a high-volume manufacturing or production environment, • Some working knowledge of PLC systems, including Siemens S7 and/or Allen Bradley, • Multi-skilled capability with a willingness to support mechanical maintenance activities where required Key Responsibilities • Carry out planned and reactive maintenance on production machinery to maximise uptime and efficiency, • Complete all maintenance documentation, data recording, and reporting accurately and within required timeframes, • Perform preventative maintenance and condition-based monitoring activities, • Interpret electrical and mechanical schematics and technical drawings, • Support installation and upgrade projects, including cabling, containment systems, and electrical infrastructure, • Work with systems involving pneumatics, hydraulics, and PLC controls, • Maintain compliance with all health, safety, and environmental standards, • Contribute to continuous improvement initiatives and operational best practice, • Provide cross-functional support to other maintenance personnel when required, • Participate in training and development to remain compliant with current legislation and industry standards, • Communicate effectively across all levels of the business, • Support shift cover, overtime, and call-out requirements as needed Skills & Competencies • Strong fault-finding and problem-solving ability, • Ability to work independently and under pressure in a fast-paced environment, • Team-oriented with the ability to support and influence others, • Good numerical and IT skills, including maintenance management systems, • Flexible, proactive, and committed to ongoing learning and development Technical Knowledge • Electrical systems and wiring regulations, • PLC fault finding and basic programming awareness, • Pneumatics and hydraulics (basic level), • Fabrication and basic welding (desirable), • General mechanical fitting skills Working Environment This role operates within a fast-paced, results-driven manufacturing environment. The successful candidate will demonstrate: • Strong decision-making capability, • Clear and effective communication skills, • A flexible and proactive approach aligned with business objectives JBRP1_UKTJ

A highly reputable claims and disputes consultancy based in Sheffield, Yorkshire is looking to hire a Associate Delay Director. There is also an exciting opportunity for the Associate Director to open an office in an agreeable strategic location such as Birmingham, Leeds, London and Manchester. The successful candidate will likely be an existing Associate Director or Senior Consultant in Delay who has worked for a consultancy providing dispute resolution services. If this sounds like you, then this position could be a great career move. In return, you will work for a reputable consultancy with a highly experienced senior management team where you can expect to be involved in claims, disputes (largely adjudications) and expert witness work. In this line of work, it is common to gain exposure to a wide variety of assignments. This can include projects in multiple sectors, as well as working with a number of unique clients, including main contractors, sub-contractors and client organisations. As an Associate Director, you will report directly to the Managing Director and provide support to senior management on more complex disputes work, as well as being charged with running your own assignments with clients relating to claims on live projects. You will be expected to provide all of the following services within this role: • Collaborate with the Delay Analysts at to offer support on disputed and time-related issues., • Reviewing construction programmes and offering guidance on them., • Helping clients avoid conflicts by offering expert, commercially focused counsel., • Providing support to clients on matters related to delay and loss., • Collaborate with the commercial experts to offer support on disputed and, • non-controversial time-related issues., • Provide timely and delay-related coaching and training to numerous clients., • Report writing and representation of clients in tribunals., • Collaborate with solicitors offering expert support in construction-related disputes, • Business Development, • Acting as a Lead Assistant to an Expert Witness., • Approximately 10 years postgraduate experience in the construction industry., • The chosen applicant will have prior experience working in live planning and programming roles for contracting organisations or delay analysis work at a disputes consultancy. Experience of both would be highly advantageous., • Familiarity with Programmes and Programming Software., • Ability to use some or all of the following software: P6, Asta Powerproject, MS Project, • Some formal involvement in managing or supporting in a formal dispute (adjudication, arbitration, litigation etc.) would be advantageous, but is not essential, • Well-presented and articulate individual with the ability to thrive in a client-facing role and communicate effectively with the client, • Good experience/knowledge of standard forms of contract such as NEC and JCT is essential, • Competent with Microsoft Office packages., • Qualified to degree level, • A Masters in Construction Law would be desirable. Candidates working towards either of these may be considered also. The hiring company is a multi-disciplinary construction consulting firm with a focus on risk analysis and mitigation, expert witness, coaching, training, project management, commercial management, and dispute avoidance. Since its founding, the company has built a solid and expanding clientele. It is ideally situated to offer clients across the country a high calibre of service, with multiple office sites around the United Kingdom. The business is headed up by a highly respected senior management team who can provide excellent guidance and support to the successful candidate in their professional career development. Basic Salary up to £120k (DOE) + Car allowance + Pension + Discretionary Bonus + Support towards further qualifications + Hybrid working Opportunity Nilam Modhwadia is our specialist consultant managing this position 0203 710 8098 (Office hours 8.30 am - 5.30 pm Monday to Friday) • Sheffield, South Yorkshire - Up to GBP£100k DOE, • Hong Kong Island, Hong Kong - to HK$1.2M plus benefits, • Perth, Western Australia - Negotiable DOE and get a £500-£1000 cash reward forsuccessfulmatches. #J-18808-Ljbffr

A highly reputable claims and disputes consultancy based in Sheffield, Yorkshire is looking to hire a Associate Delay Director. The successful candidate will likely be an existing Associate Director or Senior Consultant in Delay who has worked for a consultancy providing dispute resolution services. If this sounds like you, then this position could be a great career move. In return, you will work for a reputable consultancy with a highly experienced senior management team where you can expect to be involved in claims, disputes (largely adjudications) and expert witness work. In this line of work, it is common to gain exposure to a wide variety of assignments. This can include projects in multiple sectors, as well as working with a number of unique clients, including main contractors, sub-contractors and client organisations. As an Associate Director, you will report directly to the Managing Director and provide support to senior management on more complex disputes work, as well as being charged with running your own assignments with clients relating to claims on live projects. You will be expected to provide all of the following services within this role: • Collaborate with the Delay Analysts at to offer support on disputed and time-related issues., • Reviewing construction programmes and offering guidance on them., • Helping clients avoid conflicts by offering expert, commercially focused counsel., • Providing support to clients on matters related to delay and loss., • Collaborate with the commercial experts to offer support on disputed and non-controversial time-related issues., • Provide timely and delay-related coaching and training to numerous clients., • Report writing and representation of clients in tribunals., • Collaborate with solicitors offering expert support in construction-related disputes, • Business Development, • Acting as a Lead Assistant to an Expert Witness., • Approximately 10 years postgraduate experience in the construction industry., • The chosen applicant will have prior experience working in live planning and programming roles for contracting organisations or delay analysis work at a disputes consultancy. Experience of both would be highly advantageous., • Familiarity with Programmes and Programming Software., • Ability to use some or all of the following software: P6, Asta Powerproject, MS Project, • Some formal involvement in managing or supporting in a formal dispute (adjudication, arbitration, litigation etc.) would be advantageous, but is not essential, • Well-presented and articulate individual with the ability to thrive in a client-facing role and communicate effectively with the client, • Good experience/knowledge of standard forms of contract such as NEC and JCT is essential, • Competent with Microsoft Office packages., • Qualified to degree level, • A Masters in Construction Law would be desirable. Candidates working towards either of these may be considered also. The hiring company is a multi-disciplinary construction consulting firm with a focus on risk analysis and mitigation, expert witness, coaching, training, project management, commercial management, and dispute avoidance. Since its founding, the company has built a solid and expanding clientele. It is ideally situated to offer clients across the country a high calibre of service, with multiple office sites around the United Kingdom. The business is headed up by a highly respected senior management team who can provide excellent guidance and support to the successful candidate in their professional career development. Basic Salary up to £120k (DOE) + Car allowance + Pension + Discretionary Bonus + Support towards further qualifications + Hybrid working Opportunity Nilam Modhwadia is our specialist consultant managing this position 0203 710 8098 (Office hours 8.30 am - 5.30 pm Monday to Friday) and get a £500-£1000 cash reward forsuccessfulmatches. #J-18808-Ljbffr

We're seeking a talented and experienced Fullstack Engineer to join our team. As a key member, you will play a critical role in driving business growth and innovation by designing, developing, and deploying fullstack applications that optimise processes, improve efficiency, and minimise risk. In this role, you will have the opportunity to work on complex and challenging projects that have a direct impact on our business. You will collaborate with stakeholders across the organisation to identify business needs and develop technical solutions that drive results. Your expertise in fullstack development, data science, and financial markets will enable you to make a significant contribution to our team and help drive business success. • Develop and implement fullstack applications that automate and streamline processes, improving efficiency and reducing risk., • Develop and Manage backend systems primarily using Python, with additional capabilities in Java and other languages., • Develop and manage frontend applications primarily using React and Next.js, with additional capabilities in JavaScript and other frameworks., • Design and implement core backend services and systems to serve other applications using high performance programming languages such as java., • Demonstrate a strong ability to understand and apply software architecture patterns, including microservices and event-driven architecture, to design robust and scalable solutions., • Work closely with cross-functional teams to design and implement solutions that meet business requirements and goals., • Communicate complex technical concepts to non-technical stakeholders, including business leaders and external partners., • Rapid response to issues as they arise, with the ability to drive quickly to the heart of an issue and propose appropriate solutions., • Manage work and processes across multiple sites., • Maintain discipline in coding practice while ensuring timely delivery of end solutions., • Proficiency in Python is required, with familiarity in other programming languages such as Java,, • C++, Go, Rust, and others being advantageous., • Strong understanding of software architecture patterns, including microservices and event driven architecture., • Familiarity with containerisation using Docker, and experience with container orchestration tools such as Kubernetes., • Strong understanding of software development lifecycle methodologies and experience with, • DevOps and CI/CD pipelines., • Experience with frontend technologies, including React and Next.js, and JavaScript., • Familiarity with data science and analytics techniques, including machine learning and statistical modelling., • Experience with database management systems, including relational and NoSQL databases., • Experience with Dash or other UI frameworks is a nice to have., • The opportunity to work on complex and challenging projects that have a direct impact on our, • A collaborative and dynamic work environment with a team of experienced professionals., • Opportunities for career growth and development, with a focus on continuous learning and #J-18808-Ljbffr

A highly reputable claims and disputes consultancy based in Sheffield, Yorkshire, is looking to hire a Senior Delay Consultant. The successful candidate will likely be an existing Delay Analyst who has worked for a consultancy providing dispute resolution services. Alternatively, this role would also suit a construction professional from a contracting background, who has had some exposure to claims and disputes work within their role and is now interested in joining a specialist claims and disputes consultancy where they can develop their skills and career within the claims and disputes sector. If this sounds like you, then this position could be a great career move. In return, you will work for a reputable consultancy with a highly experienced senior management team, where you can expect to be involved in claims, disputes (largely adjudications), and expert witness work going forward. This role offers exposure to a wide variety of assignments across multiple sectors, working with diverse clients including main contractors, sub-contractors, and client organizations. As a Senior Delay Consultant, you will report directly to the Managing Director and support senior management on complex disputes, as well as managing your own client assignments related to claims on live projects. You will be expected to: • Support Delay Analysts on disputed and time-related issues., • Review construction programmes and provide guidance., • Help clients avoid conflicts with expert, commercially focused advice., • Support clients on delay and loss matters., • Collaborate with commercial experts on time-related issues., • Provide delay-related coaching and training to clients., • Prepare reports and represent clients in tribunals., • Work with solicitors in construction disputes., • Engage in Business Development activities., • Approximately 10 years of postgraduate experience in the construction industry., • Experience in live planning and programming roles or delay analysis at a disputes consultancy; experience in both is advantageous., • Familiarity with programmes and scheduling software., • Proficiency in P6, Asta Powerproject, MS Project., • Experience in managing or supporting formal disputes (advantageous but not essential)., • Excellent communication skills and client-facing experience., • Knowledge of standard forms of contract such as NEC and JCT., • Proficiency with Microsoft Office packages., • Degree qualification; a Masters in Construction Law is desirable., • Candidates working towards these qualifications may also be considered. The company is a multidisciplinary construction consulting firm specializing in risk analysis, expert witness, training, project and commercial management, and dispute avoidance. It has a growing client base across the UK, supported by multiple offices and a respected senior management team committed to professional development. Salary up to £90k (DOE), plus car allowance, pension, discretionary bonus, support for further qualifications, and hybrid working options. Nilam Modhwadia is our specialist consultant managing this position. Contact: 0203 710 8098 (Office hours 8:30 am - 5:30 pm, Monday to Friday) Get a £500-£1000 cash reward for successful placements. #J-18808-Ljbffr

Role Title: Application Developer Location: Sheffield (3 days onsite is mandatory) Rate: £400 - £475 We are looking for a highly skilled Application Developer with strong expertise in identity API development, data ingestion and transformation, and event-driven (Pub/Sub) architectures. This role focuses on building secure, scalable identity and access workflows across Google Cloud Platform, integrating identity services with custom APIs, Pub/Sub pipelines, and cloud-native applications. You will collaborate closely with tech leads, Cloud Security, DevOps, and Application Engineering teams to design and implement robust IAM automation, identity lifecycle workflows, and secure service integrations that support enterprise-level cloud and Identity operations. • Design and implement identity flows for provisioning, de-provisioning and orchestration of identity lifecycle events., • Integrate with Cloud Identity Services, ServiceNow, and internal services to streamline / orchestrate identity provisioning and identity lifecycle management., • Build policy-based orchestration workflows for adaptive authentication and contextaware access using industry standards (like OPA)., • Design, build, and secure RESTful APIs and backend services supporting identity, provisioning, and governance workflows., • Integrate APIs with our new authentication service for token validation, user sessions, and application-level authorization., • Build and document internal SDKs, middleware, and shared libraries for consistent IAM logic across services., • Ensure API security, performance, reliability, resilience, and observability. Develop pipelines where API events publish to Pub/Sub for asynchronous workflows such as: • automated identity lifecycle tasks, • access review event triggers, • logging and audit forwarding, • security anomaly detection Build Cloud Functions, Cloud Run microservices, or containerized services to process Pub/Sub messages. Implement robust event-processing patterns including retries, idempotency, DLQs, and structured logging. • Build and maintain Terraform modules for IAM, API services, Pub/Subtopics, workloads, and permissions., • Automate deployment and validation of identity and access configurations via CI/CD pipelines., • Implement automated testing for IAM policies and API behaviour., • Troubleshoot identity, access, and API workflow issues across distributed systems., • Provide technical guidance to engineering teams on secure API design, IAM best practices, and identity workflows., • Work with security teams during audits, compliance checks, and incident investigations., • Proven experience with modern identity orchestration platforms (Auth0 Actions, Okta Workflows, WorkOS, or SlashID), • Strong programming skills in Python, Go, or Node.js for API and microservice development., • Experience designing and deploying cloud-native APIs (Cloud Run, Cloud Functions, GKE)., • Deep understanding of event-driven architectures, Pub/Sub, message processing, and workflow automation., • Strong knowledge of OAuth2, OIDC, JWT, SAML, and identity federation patterns., • Proficiency in Terraform or equivalent IaC tools., • Experience using API gateways, reverse proxies, or service mesh technologies., • Analytical thinker with strong debugging and root‑cause analysis abilities., • Clear communication skills with the ability to collaborate across engineering, security, and operations teams., • Ownership mindset, with a security‑first mentality and attention to detail., • Ability to work in an agile, fast-paced environment., • Full Stack App Development (React), • Google Professional Cloud Security Engineer or Cloud Architect certification., • Experience with additional identity providers (Okta, Azure AD, Ping Identity)., • Familiarity with Kubernetes (GKE RBAC + workload identity)., • Experience using Secret Manager, Vault, or other secrets management tools., • Knowledge of compliance frameworks (SOC2, ISO 27001, PCI, HIPAA)., • Bachelor's degree in computer science, Engineering, Information Security, or equivalent hands‑on experience. #J-18808-Ljbffr

Pay up to £80,664 plus 28.97% employer pension contributions, hybrid working, flexible hours, and great work life balance. This is a real and significant DevOps leadership role in the UK's largest government department. Here you will have the freedom and autonomy to drive the development of our technical landscape and define what DevOps looks like in DWP. You'll be a leading, expert voice in a DWP Digital community that is driving a once-in-a-generation transformation of public services. We have a unique purpose, putting better, more efficient services in the hands of DWP users. The scale of our engineering challenge is also huge: • We have 1bn lines of code in over 12,000 code repos and 90+ programming languages., • We run around 294 days' worth of testing every day through automation., • Our APIs receive 173 million requests, and we spin up 280,000 AWS servers every month., • Over 22 million people - 1/3 of the UK's adult population access our services daily., • Over 100,000 colleagues and agents use the kit, tools and systems we roll out. We build and maintain systems behind payments worth over £280bn payments annually., • Demonstrable experience of developing and supporting AWS cloud-based applications., • Demonstrable knowledge of writing and maintaining Infrastructure, and Configuration as Code., • Demonstrable experience of using Unix/Linux in a support and/or development environment including scripting languages., • Demonstrable experience of working in a DevOps environment - Continuous Integration & Deployment, Delivery methods and techniques, including agile scrum experience., • Demonstrable knowledge of implementing and maintaining CI/CD pipelines., • Experience of supporting, guiding, and developing Engineers across multi-disciplinary teams in an agile environment. In this role, you and your teams will help shape and support modern cloud platforms by designing, building and improving secure, scalable and resilient AWS solutions. Working closely with engineering teams, you'll drive automation, enhance CI/CD pipelines and use Infrastructure as Code to enable the delivery of reliable digital services. You’ll tackle complex technical challenges, champion engineering best practices and support a culture of ownership, continuous improvement and operational excellence, while mentoring other engineers and helping evolve our DevOps capabilities. You’ll join us in one of our brilliant digital hubs in Birmingham, Blackpool, Leeds, Manchester, Newcastle or Sheffield, whichever is most convenient for you. We work a hybrid model - you'll spend some time working at home and some time collaborating face to face in a hub. We offer competitive pay of up to £80,664. You’ll get a brilliant civil service pension with employer contributions worth 28.97%, worth over £16,000 per year. A generous leave package starting at 26 days rising to 31 days over time. You can also take up to 3 extra days off a month on flexi-time. You’ll also get all the usual public holidays. • Flexible working including flexible hours and flex-friendly policies, • Time off volunteering and charitable giving, • Bring your authentic self to work with 'I Can Be Me in DWP', • Discounts and savings on shopping, fun days out and more, • Interest-free loans to buy a bike or a season ticket, so it's even easier for you to get to work and start making a difference, • Professional development, coaching, mentoring and career progression opportunities., • DWP have been recognised as 2024 Diversity Employer of the Year at the Computing Women in Tech Excellence awards, • Diverse and Inclusive Leadership at Digital Leaders Awards 2024, • Commended as Best Place to Work in Digital category in the Computing Digital Technology Leaders awards 2025, • Recognised as one of the Best Public Sector Employers at 2025 Women In Tech Employer Awards #J-18808-Ljbffr

JOB: CNC Turner (with programming knowledge on FANUC machines) LOCATION: Bolton BL2 STATUS: Permanent HOURS: Mon-Fri (days) but some flexibility of hours can be arranged to suit travel/personal circumstances My client is seeking to employ a full-time CNC Turner who can modify and programme in FANUC format. Ideally, you will be a fully qualified Turner who takes pride in their finished product. If you have the desire to move into more of a supervisory/managerial role - either now or in the near future - this is something that my client would be happy to discuss with you. The main purpose of this role is to ensure that productivity is at the highest level and that the company is producing a quality product. You will ensure that material is complete and in line with schedules and supervisor directives. You will also ensure that job timings are recorded accurately and that safe working practices are in place for both yourself and your colleagues. You will ensure that machining accuracy and quality checks are all carried out and correctly recorded. Where a machine in running in excess of a five minute product cycle, you will ensure that there is a second machining function in operation. If you feel that this is the right job for you, please can you send me your CV as soon as possible. My client hopes to interview and appoint in the near future. Only qualified TURNERS who can programme in FANUC format will be considered for this position. JBRP1_UKTJ

Automation Manager Our client is a well-established and technically focused industrial automation company specialising in the design, development and delivery of bespoke automated machinery and control systems. We are looking for an experienced Automation Manager to lead the automation and controls function across a varied portfolio of industrial automation projects. This is a senior technical and leadership position, responsible for providing direction across PLC software, robotics, vision, motion control and machine automation. You will work closely with project, electrical and mechanical engineering teams, customers and suppliers to ensure projects are delivered safely, efficiently and to a high technical standard. The company's control platforms are predominantly Siemens and Allen-Bradley, with robotics from ABB, KUKA, FANUC and Yaskawa, and vision systems predominantly from Keyence and Wenglor. Key Responsibilities • Lead and manage the automation and controls engineering function across multiple projects., • Take technical ownership of automation software development and control system architecture., • Develop, review and maintain PLC software using Siemens and Allen-Bradley platforms., • Establish and maintain software standards, programming practices, reusable libraries and engineering procedures., • Provide technical leadership across PLC, HMI/SCADA, robotics, vision, motion control and industrial communications., • Support the integration of industrial robots including ABB, KUKA, FANUC and Yaskawa., • Oversee the integration and development of industrial vision systems, predominantly Keyence and Wenglor., • Provide technical leadership on advanced automation applications, including specialist robotic systems and bin-picking applications., • Ensure automation designs meet project specifications, customer requirements and relevant safety standards., • Produce and review functional specifications, software design documentation, test procedures and commissioning documentation., • Plan and oversee software testing, system integration, FAT, SAT and site commissioning activities., • Work closely with project managers, mechanical and electrical engineering teams to coordinate project delivery., • Liaise directly with customers and suppliers on technical matters, providing solutions and resolving issues throughout the project lifecycle., • Support engineers with complex technical problems and provide mentoring and development to the automation team., • Manage priorities, resources and engineering workloads to ensure projects are delivered on time and to the required standard., • Drive continuous improvement across automation engineering processes, software quality, documentation and project delivery., • Identify new technologies and opportunities to improve the company's automation capabilities.What Youll Bring, • Proven experience in a senior automation, controls or software engineering role within an industrial automation or machine-building environment., • Strong PLC programming experience, ideally across both Siemens and Allen-Bradley platforms., • Strong understanding of PLC programming principles, including Ladder Logic and Structured Text., • Experience with HMI/SCADA systems and industrial communication networks., • Strong practical understanding of machine control, sequencing, fault handling, diagnostics and commissioning., • Experience leading automation projects or providing technical leadership to a controls/automation team., • Industrial robotics experience would be highly advantageous, particularly with ABB, KUKA, FANUC or Yaskawa., • Experience with industrial vision systems, particularly Keyence and/or Wenglor, would be advantageous., • Experience with servo systems, motion control, drives and automated material handling., • Experience integrating multiple automation technologies into complete automated machines or production systems., • Exposure to specialist robotic applications such as bin picking would be advantageous., • Strong problem-solving skills and a methodical approach to engineering, testing and commissioning., • Ability to interpret electrical drawings and work effectively with mechanical and electrical engineering disciplines., • Excellent communication and leadership skills, with the ability to work effectively with engineers, project managers, customers and suppliers., • Strong technical documentation and software development practices., • Relevant engineering qualification such as HNC, HND, BEng or equivalent industry experience., • Full UK driving licence and willingness to travel to customer sites when required.Whats on Offer, • Competitive salary based on experience and technical capability., • The opportunity to lead the automation function within a growing and technically focused engineering business., • A varied project portfolio involving bespoke industrial automation, robotics and machine vision., • Exposure to leading automation technologies including Siemens, Allen-Bradley, ABB, KUKA, FANUC, Yaskawa, Keyence and Wenglor., • The opportunity to influence automation standards, engineering processes and future technology development., • Ongoing training and professional development., • Opportunities for career progression and increased technical and management responsibility., • A collaborative and technically driven engineering environment., • Company pension and holiday benefits., • Regular opportunities to work on challenging, bespoke automation projects for a range of industrial customers. JBRP1_UKTJ

CNC Lathe Programmer / Setter Operator Required! Our client is an established manufacturing business, producing specialist metal components and assembly solutions to a range of industries. On behalf of our client, we are seeking an experienced CNC Lathe Programmer / Setter Operator to join the team. The successful candidate will be responsible for programming, setting, and operating CNC lathes to ensure efficient production in line with the build plan, maintaining high-quality standards, and maximising machine utilisation and output. Package: • Rotating shift pattern - 6am - 2pm & 2pm - 10pm, • £17 - £21 per hour (DOE), • Company pension scheme, • 20 days holiday plus bank holidays CNC Lathe Programmer / Setter Operator - Responsibilities: • Program, set, operate, and monitor CNC lathes to meet production targets in line with the build plan., • Ensure machines run efficiently with minimal downtime and support breakdown resolution., • Carry out job and tool changes, ensuring smooth production flow., • Produce and gain approval for first-off and in-process quality checks in line with procedures., • Support new product introduction by manufacturing prototype and development parts., • Maintain accurate real-time production records using the Mietrak MRP system., • Monitor tooling levels and request replacements to avoid disruption to production., • Maintain high housekeeping standards and ensure a safe, organised work area (5S)., • Liaise with warehouse and FLT teams to ensure timely movement of finished goods., • Communicate issues, risks, and improvements to the Team Leader., • Support, guide, and assist other operators, including training new starters., • Ensure machines are correctly set and running with clear shift handovers., • Undertake other reasonable tasks within capability as required by the Team Leader. CNC Lathe Programmer / Setter Operator - Requirements: • Experience in programming, setting, and operating CNC lathes., • Knowledge of Haas or Dugard VMC (Fanuc controlled) preferred., • NVQ or C&G in Mechanical Engineering / CNC Setting & Programming (or equivalent experience)., • Ability to read and interpret technical engineering drawings., • Competent in the use of engineering measuring equipment., • Forklift licence (desirable but not essential)., • Knowledge of abrasive wheel regulations (desirable). Streamline Search is acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application. JBRP1_UKTJ

Job Title: Golang Engineer, Golang Developer, Go Engineer, Go Developer, Software Engineer Location: Burgess Hill, Sussex, UK Job Type: Contract Length: 5 months + extensions (long-term, multi-year project) Day Rate: £260 - £270 per day (inside IR35) Working Setup: 3 days per week onsite / 2 days remote Talent-Relay has partnered with a global leader in the financial services sector to urgently onboard an experienced Golang Engineer / Golang Developer / Go Engineer into an established technology team. This is an excellent opportunity for a mid-level Golang Engineer to work on a modern, global customer platform, developing scalable microservices and APIs within a collaborative Agile environment. The successful Golang Engineer will be involved in designing, developing and enhancing modern microservice-based applications, working closely with other Software Engineers, QA teams and SREs to deliver reliable, high-quality solutions. The initial contract is for 5 months, with extensions highly likely as part of a long-term, multi-year programme. Key Responsibilities: ·Demonstrable experience as a Golang Engineer within a commercial environment. • Design, develop, test and maintain backend applications using Golang., • Build and enhance scalable, resilient microservices and REST APIs., • Develop solutions supporting high-volume customer-facing applications., • Work with messaging technologies such as Kafka / RabbitMQ and asynchronous services., • Contribute to the migration and modernisation of legacy applications., • Work collaboratively within an Agile/Scrum development team., • Develop automated unit, integration and functional tests., • Contribute to CI/CD pipelines and automated software delivery., • Collaborate with Development, QA, SRE and Production Support teams. Required Skills & Experience: • Commercial experience developing software using Golang / Go., • Experience developing backend microservices and RESTful APIs., • Strong experience with Git, Jenkins and CI/CD., • Experience working with PostgreSQL and/or NoSQL databases., • Experience with messaging technologies, ideally Kafka., • Understanding of TDD, BDD and automated testing., • Experience working within Agile/Scrum development environments., • Strong problem-solving and analytical skills., • Excellent communication and collaboration skills., • A genuine interest in learning new technologies and developing technical skills. Desirable Skills: • Experience with Docker and Kubernetes., • Knowledge of Java or another backend programming language., • Experience with gRPC or GraphQL., • Experience working with cloud technologies., • Contributions to open-source projects. Why Apply? This is a strong opportunity for a Golang Engineer / Go Developer to join a high-profile financial services technology programme, working with modern engineering practices and technologies within a global organisation. Great opportunity to grow and learn new skills and develop career. Apply now for immediate consideration. JBRP1_UKTJ

About the Role We are looking for an experienced Gas Designer to join our design team and play a key role in delivering high-quality gas infrastructure projects. You will be involved throughout the design process, from initial site surveys and project set-up through to detailed design, governance and construction support. Working closely with experienced engineers, project teams, clients and external consultants, you will have the opportunity to develop your technical expertise while contributing to high-profile gas projects across the UK. Key Responsibilities • Monitor industry best practices, recommend new design approaches and identify emerging trends., • Develop high-quality design concepts, working collaboratively through design iterations and actively seeking feedback from relevant stakeholders., • Work across all phases of projects, including project set-up, programming, design and CDM documentation., • Request and review STAT plans., • Provide technical design support to other members of the design team., • Collaborate with internal design teams, client design teams and external consultants to deliver projects effectively., • Respond to and resolve design issues with clients, third-party organisations and subcontractors., • Produce weekly design reports and present design information during regular design output meetings., • Undertake regular site visits and surveys to gather information for detailed designs and as-laid drawings., • Represent the organisation at pre-design and walk-off meetings with clients., • Ensure compliance with CDM 2015 throughout the design process., • Create and maintain the Health & Safety File throughout the various stages of the project, ensuring it is accurate, up to date and available at project completion., • Produce high-quality, detailed technical drawings, plans and general arrangements., • Work alongside Framework Managers, Project Managers, Operations Managers and Design Managers to ensure schemes are delivered within budget and agreed timescales., • Assist with design queries during construction, providing support to site-based teams., • Take designs through the client's G17 governance process., • Travel to sites across the UK may be required for tender events, site surveys and design reviews. Skills, Knowledge & Experience, • Engineering qualifications are desirable, although relevant industry experience will also be considered., • Experience designing intermediate-pressure and high-pressure gas mains., • Previous experience working within the gas industry on complex or high-profile projects., • Good understanding of relevant gas industry engineering specifications and IGEM standards., • Knowledge and awareness of CDM 2015., • Proficient user of AutoCAD., • Competent using Microsoft Excel, Word, PowerPoint and Outlook., • Strong analytical and problem-solving abilities., • Excellent organisational skills, with the ability to manage workloads across multiple projects., • Ability to work effectively as part of a multidisciplinary team., • A proactive approach to identifying and resolving design issues., • Willingness to mentor and support less experienced colleagues., • Strong communication and stakeholder-management skills. What We Offer, • Competitive salary based on experience., • Full benefits package., • The opportunity to work on a range of major gas infrastructure projects., • Opportunities for professional development and career progression., • A collaborative working environment where technical expertise and new ideas are valued. Diversity & Inclusion We are committed to creating an inclusive workplace where everyone is valued and treated fairly. We welcome applications from people of all backgrounds, experiences and circumstances and do not discriminate on the basis of protected characteristics. We are also proud to support the Armed Forces community and welcome applications from ex-Armed Forces personnel, reservists, veterans, cadet instructors and military spouses or partners. Apply Now If you have experience in gas design and are looking for your next opportunity to develop your career while working on major UK infrastructure projects, we would be pleased to hear from you. Apply now to take the next step in your career as a Gas Designer. JBRP1_UKTJ

Our clients have an exciting opportunity for a Quality Engineer with CMM experience to join their growing team in Portsmouth. Duties & responsibilities: • Manage and maintain CMM capability to support inspection, verification, and production requirements., • Demonstrate strong working knowledge of PC-DMIS, with proven experience in CMM programming., • Provide support for internal and external quality audits as required., • Develop and maintain quality plans in accordance with tender, customer, and contractual requirements., • Prepare fault investigation reports as required, including root cause corrective action and 8D activities., • Raise non-conformance reports within the ERP system as required., • Administer and maintain the non-conformance management system., • Conduct inspection activities in accordance with business and customer requirements., • Demonstrate practical experience in manual measurement techniques., • Review, develop, and maintain quality procedures as required., • Complete actions associated with Drawing Office Instructions in a timely and effective manner., • Provide training to operators in inspection techniques and applicable quality requirements. Skills and Experience • Proven experience in CMM programming and operation, preferably using PC-DMIS software., • Strong understanding of inspection methods, manual measurement techniques, and quality control requirements., • Ability to produce Inspection FAIR, • Experience working within a manufacturing, engineering, or precision machining environment., • Ability to interpret engineering drawings, specifications, and customer quality requirements., • Knowledge of non-conformance management, root cause analysis, corrective action, and 8D problem-solving processes., • We require someone who is able to complete a Security clearance. Working hours: 7.30 am to 4.00 pm Mon Thurs and 7.30 am to 12.30 pm Friday JBRP1_UKTJ

Autodesk is looking for a Senior Software Engineer to help design and build a reusable Electron and Chromium-based desktop platform for Autodesk web applications. In this hands-on individual contributor role, you will own complex areas of the desktop runtime, contribute to technical design decisions, guide implementation across Electron, Chromium, Node.js, and Windows, and help establish the engineering practices required to operate the platform reliably. You will solve challenging problems at the boundary between web applications and native desktop software while mentoring other engineers and collaborating across Autodesk teams. Responsibilities* Electron and desktop platform engineering - approximately 35%: Design, implement, and own significant areas of the Electron application, including process architecture, native integrations, web-to-desktop interfaces, and application lifecycle* Chromium runtime engineering - approximately 25%: Own the configuration and integration of the Chromium runtime, including supported build settings, runtime flags, Electron and Chromium upgrades, feature enablement, compatibility analysis, and technical investigations* Windows and native systems integration - approximately 20%: Design and implement integrations with Windows APIs and system capabilities such as hardware discovery, process management, application protocols, GPU preference, system configuration, and enterprise desktop behavior* Architecture, reliability, and technical leadership - approximately 20%: Contribute to architecture decisions, security design, troubleshooting strategy, engineering standards, and the long-term maintainability of the platform Own moderately complex and complex features from initial investigation through technical design, implementation, validation, and delivery Break ambiguous technical work into actionable tasks, identify dependencies and risks, and coordinate with other engineers and partner teams when necessary Design secure boundaries between hosted web applications and privileged desktop functionality, including process isolation, API exposure, navigation controls, and inter-process communication Work with the technical lead and application-security partners to apply Electron and Chromium security best practices and address findings Define and maintain stable interfaces that allow Autodesk web applications to consume shared native desktop capabilities without creating product-specific forks Lead evaluation and adoption of new Electron and Chromium releases, investigate compatibility and performance implications, and recommend upgrade approaches Diagnose complex runtime, memory, startup, security, operating-system, and application-integration issues using Chromium tooling, native debuggers, profiling tools, crash diagnostics, and system telemetry Collaborate with the build and release engineer to ensure runtime dependencies and desktop components can be built, packaged, tested, and released reliably Work with product and specialist engineering teams to expose platform capabilities while keeping product-specific implementation outside the shared desktop layer Contribute to architecture decision records, technical documentation, coding standards, and operational runbooks Review code and designs from other engineers and provide constructive technical guidance Mentor less-experienced engineers and help them develop expertise in Electron, Chromium, desktop engineering, debugging, and secure application design* Proactively identify technical debt, platform risks, and opportunities to simplify or improve the system Minimum Qualifications Bachelor's degree in Computer Science, Software Engineering, or a related technical field, or equivalent practical experience 5+ years of professional software engineering experience Strong software development experience with JavaScript/TypeScript and Node.js Experience developing Electron applications, Chromium-based applications, native desktop software, or comparable systems-level application platforms Strong understanding of application architecture, asynchronous programming, process boundaries, security, and software lifecycle management Experience independently delivering complex software features from design through production Strong debugging and troubleshooting skills across multiple components or technology layers Experience with automated testing, source control, code review, and modern continuous integration practices* Ability to communicate technical trade-offs and work effectively with engineers across multiple teams Preferred Qualifications Deep experience with Electron architecture, including main, renderer, preload, context isolation, inter-process communication, and security configuration Understanding of Chromium architecture, runtime configuration, feature flags, release cycles, or build systems Experience with C++, native Node.js modules, or bindings between JavaScript and native platform APIs Experience with Windows systems programming or Windows desktop APIs Experience diagnosing memory, process, performance, or crash problems in Chromium-based applications Familiarity with Chromium or Electron build tooling such as GN and Ninja Experience with Windows installers, application signing, enterprise software deployment, or application updating Experience designing APIs or shared platform components consumed by multiple applications or teams Experience with software security threat modeling or secure desktop application design Experience mentoring engineers or providing technical leadership within a development team The Ideal CandidateYou enjoy solving problems that cross traditional frontend, backend, and systems-engineering boundaries. You are comfortable moving from TypeScript and Electron code into Chromium diagnostics, native operating-system behavior, build configuration, or security analysis when the problem requires it.You can take an open-ended technical problem, investigate the available options, make reasoned recommendations, and independently drive implementation while knowing when a broader architectural decision needs input from the technical lead,You enjoy helping other engineers succeed, improving the systems around you, and building shared infrastructure that is maintainable beyond the immediate feature or product. We are building a new desktop platform that enables Autodesk's web-based products to deliver richer, higher-performance experiences on Windows. Forma is the first product adopting the platform, with the longer-term goal of creating reusable desktop capabilities for additional Autodesk products.You will join a new cross-functional platform team working across Electron, Chromium, Windows desktop integration, software delivery, security, and enterprise deployment. You will work closely with the team's technical lead, software engineers, quality and release engineers, and partner teams throughout Autodesk.This is a hybrid working position based out of Autodesk's Sheffield office. #J-18808-Ljbffr

Right Match Recruitment Group is working in partnership with a well established organisation based in Dartford, Kent to recruit a CNC Milling Machinist to join their team. This is an exciting, full-time and permanent role. Salary: £20.00 per hour Role Summary • CNC Milling Machinist - 5 Axis, • Experience with Heidenhain Control preferred, • Setting / Operating / Programming, • Ability to interpret and understan... JBRN1_UKTJ

MTrecs new career opportunity Our client are specialists in their industry sector, they are now looking to recruit a Mazak Programmer who has experience working turn/mill centres. You will be working a 2 shift system earlies/backs. The Job youll do • This vacancy is for someone to work with our production team to provide support in the CNC machine shop., • Programming and operating Mazak 200Y/Mazak 300Y/Maz... JBRN1_UKTJ

Key words: CNC Milling, Manufacturing, Engineering, Training, Team Leader, Programming, Quality, East Sussex, Miller, Milling, CNC, Supervisor, MasterCAM, DelCAM, Hastings, Weekdays Only. Are you an experienced CNC Programmer, with a knowledge of MasterCAM software, looking for an exciting opportuni

Controls Engineer (Manufacturing) Rotheram £55,000 - £60,000 + 33 Days Holiday + Private Healthcare Scheme + Enhanced Pension Scheme (Up to 14%) + Flexible Working Hours Are you a Controls Engineer or similar with experience working with Allen Bradley PLC's, looking for an autonomous role at an industry-leading manufacturer of specialty metals and alloys, who since their creation have grown to be a market leader in the aerospace sector? Do you want to work in a large and modern manufacturing site, in an 8 to 4 role with flexible hours and no weekend work, working with a variety control systems and machinery, with the added benefits of an enhanced pension (up to 14%), 33 days holiday, and a private healthcare scheme? In this role you will be responsible for delivering Engineering projects from concept through to commissioning and providing PLC, HMI, and SCADA support across manufacturing operations. You will be responsible for programming PLCs, predominately Allen Bradley in Studio 5000 and RS500. This role would suit Controls Engineer or similar with experience working with Allen Bradley PLC's, looking for a varied and autonomous role at a world-renowned specialty metals and alloys manufacturer, where you will be the technical go-to technical, with the added benefits of 33 days holidays, a private healthcare scheme, and an enhanced pension (up to 14%) The Role Deliver Engineering projects from concept through to installation and commissioning Providing PLC, HMI, SCADA, and control systems support across manufacturing operations Programming Allen Bradley PLCs in Studio 5000 and RS500 The Person Controls Engineer or similar Looking for an autonomous role at a respected manufacturer Commutable distance to Rotheram BBBH25920CT Key Words: Controls Engineer, Control Engineer, System Engineer, Engineer, Engineering, Project Engineer, PLC, SCADA, HMI, Allen Bradley, Rotheram, Sheffield, Doncaster, Barnsley, Worksop If you are interested in this role, click 'Apply Now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The remuneration offered will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's Privacy Policy and Disclaimers which can be found on our website. TPBN1_UKTJ

Control Systems Engineer Location: Rotherham Salary: £58,000 Shift: Monday - Friday Days Benefits: • 25 days' holiday plus statutory days • Option to buy up to 5 additional holidays after probation • Flexible bank holiday scheme • Company pension contributions of up to 14% • Onsite gym • Westfield Health Cover, Level 4 • Free onsite parking • Recruitment referral bonus scheme • Cycle to Work scheme • Electric vehicle charging points • Employee volunteering days • Career development and progression opportunities We are currently recruiting for a Control Systems Engineer to join an established manufacturing site in Rotherham. This is a project-focused role with some maintenance support, working on automation, PLC systems and improvements to production machinery. The role: • PLC programming and fault finding • Working with Allen Bradley Studio 5000 and Mitsubishi GX Works • PLC, HMI and SCADA systems • Supporting automation and control system improvements • Managing electrical and controls projects from installation through to commissioning • Working with contractors and suppliers • Root cause analysis and fault finding • Supporting maintenance and production teams • Improving machinery, processes and equipment • Working with instrumentation and 4-20mA signals • Recording work using the site's maintenance system • Occasional overseas travel You will need: • HNC, HND or equivalent engineering qualification • Strong electrical and control systems experience • PLC programming experience • Allen Bradley and Mitsubishi experience • Experience with HMI and SCADA systems • Good fault-finding skills • Experience with industrial machinery and automation • Good understanding of electrical systems • Able to work independently and as part of a team • Strong problem-solving and communication skills Experience in a medium or heavy manufacturing environment would be advantageous. If you're a Control Systems Engineer looking for a new opportunity in Rotherham, we'd like to hear from you. Get in touch with Logan at Stirling Warrington on 07754 554197 INDSW TPBN1_UKTJ

CNC Setter/Operator ( Training on Programming ) Exeter Up to £18 per hour + 20% Shift Allowance + Unlimited Overtime + Training on Programming + Career Progression + Company Bonus Are you a CNC Setter/Operator or similar, with experience working specifically on CNC Mills, looking to join a growing Engineering company who supplies into various industries such as Aerospace, Defense, and F1? Do you want to join a growing company that is expanding its team with a CNC Setter/Operator, who has experience working specifically on Mills, to manage a heavier Workload from an increasing amount of customers across the UK, while also enjoying a generous holiday scheme and shift pattern, working extended shifts with 4 day weeks, with opportunities for overtime and higher earnings. On offer, is the opportunity for a CNC Setter/Operator or similar to join an expanding business that supplies major UK sectors such as Aerospace, Defense, and F1. Established over 30 years ago, this company has continued to scale both their Workload and employee base. In this role, the successful CNC Setter/Operator will be responsible for Setting and Operating CNC Machinery, working alongside senior engineers to ensure that they can learn hands on and develop their Skills in machine Programming in CAM software. You will be working a reduced number of four day weeks working from 11:30am to 9:45pm, with the option for overtime included. The ideal CNC Setter/Operator will have experience working specifically on Mills. The Person: Experience Setting and Operating on CNC Machinery Experience working specifically on Mills Looking to work Back End Shifts The Role: Setting and Operating CNC Machinery Training on Programming and CAM Back End Shifts Reference: BBBH26553A Keywords: CNC, Setter, Operator, Training, Programming, Exeter, Mills, Engineering, Aerospace, Defense, Overtime, Progression, Bonus, CAM, Shift, Allowance, Company, Machinery, Skills, Workload, Setter, Setting, Operating, CNC Machinery If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Gauging Engineer The Opportunity: What a fabulous opportunity for an experienced Engineer with experience of Gauging and Measurements or Calibration. The Gauge Engineer will provide technical expertise for manufacturing processes on this expansive, engineering site, focusing on measurement equipment for production gauging . The Manufacturing Engineer / Gauging Engineer will be to develop automated manufacturing processes whilst offering the team measurement expertise. The Role: Create, verify and release measurement programs for automated measurement equipment including 3D structured light systems (Zeiss Scanbox) & CMM Design and deliver tooling and fixtures for manufacturing processes Development and implementation of new advanced manufacturing equipment and automation Support justification of capital funding requests Cost reduction and process improvement of current manufacturing techniques. Creating and maintaining all documentation including SOPs, EMSs, JSAs for Production gauging and other Automated operations Support NADCAP compliance for NADCAP controlled manufacturing equipment Mentor other team members in CAD, GD&T & Automation Support identification and implementation of new manufacturing technology Responsible for program storage, data back-ups and revision control for Manufacturing equipment Implement and support EH&S activities Preferred Skills: Minimum of a HNC or equivalent in an Engineering discipline Minimum of five years experience in an engineering environment Knowledge of 3DSL measurement equipment CMM Programming experience (Renishaw Modus) Experience in Aerofoil Inspection Experience trouble-shooting mechanical systems (pneumatics, tooling, measurement feedback systems) Knowledge of automation systems Good understanding of Engineering drawings and GD&T Good understanding of tooling and fixture design Working Hours: 8.00am-4.00pm Monday to Friday Associated Benefits: Competitive salary in the region of £45000 depending on your experience and qualifications.Day working (Mon-Fri) and a range of benefits including company bonus and an excellent pension scheme and 25 days annual leave plus bank holidays. Progression is encouraged, as is professional development. Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Agency for this vacancy. Please note that this specific role may be subject to export control restrictions, including under ITAR. Any offer of employment from this particular company will be conditional on the successful candidate meeting the applicable legal requirements for access to controlled information or technology. TPBN1_UKTJ

If you're looking for a career that will help you stand out, join HSBC, and fulfil your potential - whether you want a career that could take you to the top, or an exciting new direction, we offer opportunities, support and rewards that will take you further. We're one of the largest banking and financial services organisations in the world, with a network that covers more than 50 countries and territories. We aim to be where the growth is, enabling businesses to thrive and economies to prosper, and, ultimately, helping people fulfil their hopes and realise their ambitions. We are seeking a Data Engineering Lead to join our Wholesale Data & Analytics team. Wholesale Data & Analytics is an initiative that is part of the Group Data Strategy to transform the way we govern, manage and use all our data to its full potential across HSBC. If you like solving messy cross-functional problems, influencing in a matrix, and leaving things stronger than you found them, this role gives you visibility, impact, and a fast-learning curve. A move across the business allows you to continue to access tailored professional development opportunities, and our fantastic benefits packages. In this role, you will: Technically lead team and liaise with business stakeholders to ensure that business requirements are fully understood before commencing design and development. Hands-on coding and helping team members solve technical problems and provide technical SME knowledge and guidance. Understand and design of the application and own any changes required to the application for any new requirements & ensure it complies with department standards. Forward thinking for new technologies and required accessibility. Guide developers in implementing best-of-breed technical solutions based on agreed technical design, adopting industry standard development patterns and methodologies (including continuous integration and automated unit and integration testing) Responsible for ensuring implemented solutions have sufficient and appropriate automated testing in advance of User Acceptance Testing Managing continual service improvement – ensuring incremental improvements to the Service, corrective measures to recover service performance, and eventually the demise of the Service when it is no longer required. Lead from the front and demonstrate excellence in owning the end-to-end delivery of software from analysis through to release to production and support. We deliver each change to production before moving onto the next To be successful in this role you should have the following skills: Experience implementing data processes for Data Warehouse and production systems. Strong experience with Big Data technologies (e.g., Hadoop / Spark). Programming in modern languages (e.g., Scala and Python). Strong delivery engineering tooling: Git/GitHub, Jenkins, Ansible, and JIRA for requirement/backlog management. Strong understanding of software development methodologies (including Agile such as Scrum/Kanban) and modern engineering practices (CI/CD, automated testing). Being open to different points of view is important for our business and the communities we serve. At HSBC, we're dedicated to creating diverse and inclusive workplaces - no matter their gender, ethnicity, disability, religion, sexual orientation, socio-economic background or age. We are committed to removing barriers and ensuring careers at HSBC are inclusive and accessible for everyone to be at their best. We take pride in being a Disability Confident Leader and will offer an interview to people with disabilities, long term conditions or neurodivergent candidates who meet the minimum criteria for the role. If you have a need that requires accommodations or changes during the recruitment process, please get in touch with our Recruitment Helpdesk via . TPBN1_UKTJ

CNC TurnerCranbrook, Kent 45k Someone with 2/3 years experience of ideally running CMZ CNC turning machines, Fanuc control systems and offline programming using Solidworks. There is scope to run the department. Great working environment. 40 hour per week 7am-15:30pm work times Company nest pension 3% of wage Company performance bonus (Xmas) Paid in full 25days holiday Government sick pay provided O... JBRN1_UKTJ